Technologies Inc. 2013 Catalog
photo by On Track Media
Sportbike products that make sense! Welcome
At Woodcraft, innovation is one of the primary driving forces for our company. We use both the experience of our staff and the feedback from our customers to produce products that not only aim directly at the needs of track riders but also do it in a way that provides new benefits. If we can’t make something that is more crash-worthy, easier to repair or with some other real world benefit then we simply won’t get into that product line.
Below are a few of the new things that we are introducing for 2013, along with some of the advantages that we are aiming to provide with these product lines. Thanks again for taking the time to check out our catalog.
Eric Wood President Woodcraft Technologies Inc A Sampling of 2013 Innovations
The 5 second Axle Slider For some time now, we have had people (including our company president) who wanted to run axle sliders on their track bikes, but could not put up with the extra time that axle sliders added to a wheel change. After much R&D, Woodcraft is proud to unveil our patent pending quick release sliders that provide the protection of a solid slider puck (a company trademark) while adding only 5 seconds to a wheel change. We are really excited about this new line, be sure to check them out on page 31.
Woodcraft Solid Bar End Sliders Now available for all Woodcraft handlebars, these heavy duty sliders feature the tradmark Woodcraft solid slider for maximum protection. Designed just like our top selling frame slider line, the slider pucks are quickly replaced with the removal of a single bolt that is easy to access after a fall (as opposed digging out a typical center mount bolt). They are availble in three styles; lightweight for competition, heavyweight for vibration damping, and with a special mount for our patent pending hand / lever guards. See more on page 4.
High Grip, Energy Absorbing Footpegs These new pegs were tested all throughout 2012 and got rave reviews for the extra grip that they provided on the racetrack. They have been described as “striking the perfect balance between foot grip and boot sole life”. In addition, Woodcraft added a break-away section at the end, designed to absorb much of the energy of a big fall, but still leaving a rider with enough peg to continue riding when possible. These pegs are now standard on about 75% of the Woodcraft rearset kits.
1 Table of Contents
Hand Controls 3 3-piece Split Clip-Ons & OEM Fork Sizing Chart Clip-On Risers Bar End Sliders
Hand Guards 7
Foot Controls 8 Rearset Kits 3-piece Pedals Brake Switches & Return Springs
Case Covers 16
Frame Sliders 19
Shark Guards 21
Tire Warmers 22 Wheel Stands 23 Solo Operation Front Stand Front Stand Pin Application Chart Rear Stands (spool & pad) Swingarm Spools
Armour Bodies 27 Bodywork - Pro Series Custom Seat Foam & Dzus Fasteners
Axle Sliders 31 Klucky Pucks 32
Ceramic Bearings 33
Apparel & Accessories 34
Terms & Conditions 35
Sportbike products that make sense! www.woodcraft-cfm.com 2 Hand Controls 3-piece Split Clip-On
The motivation behind the Woodcraft 3-piece Split Clip-ons is simple: installing, servicing, and removing clip-ons can be a real pain and eat up valuable time at the track! Our original 3-piece design eliminates the need to disassemble the front-end to service your Clip-ons.
Light weight, great looks, improved strength, adjustability and easy installation make Woodcraft 3-piece Split Clip-ons an essential addition to any sportbike. 1” rise
All Woodcraft Clip-ons are proudly made in the USA. Street & Track friendly 7-degree down angle Ease of Installation Woodcraft’s trademark 2-piece body clamp installs easier and faster than the competition. You will never have to disassemble your front end again just to change bars. Economical 1.5” rise The universal replacement bars can pay for themselves in one crash! Most OEM bars are expensive 1-piece assemblies and require com- plete front end disassembly to replace. Replaceable bar Two-piece clamp (all sets sold complete with handlebars) Lightweight Replacemet bars Extra time was taken on these pieces to make them lightweight, (available in black) strong and great looking.
Clip-On Application (mm) & Part Number 2.5” rise 29mm 12-0129 38mm 12-0138 52mm 12-0152 30mm 12-0130 41mm 12-0141 53mm 12-0153
31mm 12-0131 41mm Kawi650R 12-0141S 54mm 12-0154 Notes- 32mm 12-0132 43mm 12-0143 55mm 12-0155 > Special Clip-On sizes 33mm 12-0133 45mm 12-0145 57mm 12-0157 are available: We can modify our standard 34mm 12-0134 46mm 12-0146 clip-ons for applications between 29mm to 55mm. 35mm 12-0135 48mm 12-0148 ! 36mm 12-0136 50mm 12-0150 > For special applications please call us: 978-297-2977 37mm 12-0137 51mm 12-0151 Clip-On Accessories
Accessory & Part Number Replacement Handlebar 12-3200 All Woodcraft Clip-Ons feature a easily removable and replaceable 7/8” Standard Bar (Silver) (ea.) 13-0100 handlebar tube for quick and cost-effective fixes in case of a crash. 7/8” Standard Bar (Black) (ea.) 13-4100 1” Bar (Silver) (ea.) 13-0101 Bar Mount Brake Reservoir Bracket Built for bikes that present challenges in mounting the brake 1” Bar (Black) (ea.) 13-4101 reservoir, this trick bracket will do the job. This bracket allows the Extra Long 7/8” Bar (Black) reservoir to be oriented either parallel or perpendicular to the bar. 13-4105 Adds 1.5 inches (ea.) Note- All Riser Clip-Ons (p.4) require this style of mount. 12-3245 Bar Mount Res. Bracket 12-3200 GSX-R Brake Reservoir Bracket GSX-R Brake Res. Brackets For Suzuki GSX-R models that use a remote brake fluid reservoir these simple brackets bolt through the top triple clamp pinch bolt 600/750 to 2005 12-3240 and provide a solid mounting point for OEM reservoir. 1000 to 2004 Note- These are not compatible with Woodcraft Riser Clip-Ons. 600/750 2006+ 12-3245 1000 2005+
“My Woodcraft clip-ons feel excellent and have withstood multiple crashes.. 3 Hand Controls Clip-On Risers Replaceable bar 1” rise (all risers are sold complete with handlebars) Adjustability Woodcraft’s clip-on risers consist of special indexed risers that are easily changed and come in 1”, 1.5”, 2”, 2.5”, and 3” rises over a standard Woodcraft Clip-On. *custom risers are available in certain sizes by special order with a $40 machining 1” rise charge (2 week lead time). Necessity Several models have very tight clearances from the factory. Our Woodcraft risers are crafted for a perfect fit in these applications. Comfort Many riders find stock sportbike ergonomics uncomfortable for real-world riding. The Woodcraft risers allow you to custom tailor the fit and feel of your motorcycle, resulting in 1.5” rise 2” rise a more enjoyable ride.
Note: See our website for clip-on riser measurment instructions. www.woodcraft-cfm.com.
Riser Spacer Kit Part # 10mm spacer 12-Spacer1.0 for 1” risers 10mm spacers 12-Spacer1.5 2.5” rise 3” rise for 1.5-3” risers An Important Note About Clipn Rise- > The rise on these parts is referenced from the standard Woodcraft clip-on (not OEM bars).
> When evaluating your motorcycle for fitment it is important to note that the center of the handlebar on these risers sits about one (1) inch forward of the edge of the fork ! tubes. A complete fitting guide for risers is available at www.woodcraft-cfm.com. Riser Application (mm) & Part Number >Some models may have Rise 37mm 41mm 43mm 45mm 48mm 50mm 51mm 52mm 53mm interference between the fork 1.0” 12-1537 12-1541 12-1543 12-1545 12-1548 12-1550 12-1551 12-1552 12-1553 pinch bolt and the riser. Our 1.5” 12-2537 12-2541 12-2543 12-2545 12-2548 12-2550 12-2551 12-2552 12-2553 10mm riser spacer moves the riser forward allowing clearance 2.0” 12-3537 12-3541 12-3543 12-3545 12-3548 12-3550 12-3551 12-3552 12-3553 on many models. Spacer kits 2.5” 12-4537 12-4541 12-4543 12-4545 12-4548 12-4550 12-4551 12-4552 12-4553 come complete with all needed hardware. 3.0” 12-5537 12-5541 12-5543 12-5545 12-5548 12-5550 12-5551 12-5552 12-5553
HD Slider - quick change Bar End Sliders With Stainless Steel weight for vibration New for 2013, these sliders offer riders the option of a reduction Heavy Duty plastic slider, a vibration reducing weighted 16-0299 slider and an option to have a heavy duty slider with an integrated mount for a Woodcraft Lever Guard
Bar End Slider Part Number HD Plastic Bar End Slider (lightweight) 16-0299 HD Plastic Weighted Bar End Slider (heavyweight) 16-5299 16-0599 Integrated mounting HD Plastic Bar End Slider with Guard Mount 16-9299 surface for Woodcraft Lever Guards (pg 7) 16-9299 ..Woodcraft is now my first stop anytime I need parts”-DK 4 Hand Controls Specialty Applications
Model Part # Kawasaki EX250 (to 07) 12-0236 Kawasaki EX500 (87-83) 12-0236 Kawasaki EX500 (94+) 12-0237 Kawasaki EX250 08+ 12-4537 Kawasaki EX300 2013 12-4537 Honda CBR250R 12-1537 Honda CBR600RR 07+ 12-2548 Honda CBR1000RR 08+ 12-1550 Ducati Monster 696-1100 12-1660 Ducati Panigale R/ Std 12-0153/57** Suzuki GSXR600/750 12-0350^ (06-10) Suzuki GSXR1000(03-04) 12-0250*^ LegendGSXR1000 (03-04) 12-0250*^ * Race Only ^ Requires Reservoir Bracket 2008+ Kawasaki Ninja 250/300 **Requires Damper Mount 12-0645 The new Ninja 250 is a great bike for both the street and track, new or experienced riders. We sat down and designed a set of risers just for this cool machine. The result is a set of 37mm Risers with a rider-friendly 5-degree angle that offer a vastly better racing position while not interfering with the gauges, tank and fairing. (12-4537)
Ducati Monster 696 / 796 / 1100 The front end design of this motorcycle makes difficult to install conventional clip-ons or risers without interference issues with the fuel tank. Our unique adaptor plate design bolts on top of the stock handlebar mount, keeping all of the stock clearances while giving you the advantage of having replaceable bar tubes, plus the ability to add extra rise to the bars at any time. (12-1660) Note: This kit requires extra long replacement bars, which are included with the kit.
Ducati Panigale Ducati’s first all new, from the ground up superbike in 2 decades provided some challenges when designing clip-ons. The OEM clip-ons have the steering stabi- lizer mount directly to them making conventional race clip-ons a problem. Our new Panigale kit comes with a stabilers mount allowing you to run race clip-ons Ducati Panigale while keeping your stock stabilizer. stabilizer mount Honda CBR600RR 07+/CBR1000RR 08+ Honda designed this motorcycle with extremely tight clearance between the handlebars & bodywork, leaving no room for conventional race clip-ons for riders with the stock upper fairing stay. We have developed special risers for these models (12-2548 for the CBR600RR) (12-1550 for the CBR1000RR) allowing the benefits of a race clip-on while keeping the stock clearances.
Honda CBR250R 2011+ When we looked at this bike, one thing that we all agreed on is that the bars needed to be lower. Our CBR250R clip-ons bolt on top of the top clamp and drop the handlebars a full 1.5” from stock, making for a much sportier feel. (12-1537)
Suzuki GSXR 600/750 2006-10, GSXR 1000 2003-04 Woodcraft’s are the only clip-ons that fit the03-04 Suzuki GSX-R 1000 (track only) and 06-10 Suzuki GSX-R 600/750’s (street & track) properly. Due to the fork taper regular clip-ons cannot grasp the fork leg correctly. With its internal step, Woodcraft’s exclusive 2-piece clamp ensures a secure grip! (12-0350 for the 600/750, 12-0250 for the 1000)
Kawasaki Ninja 250 / 300 5 Hand Controls Clip-on Application Chart Fitment: The chart below lists the sizes of the upper portion of the fork tubes for each model. There are some models that require modifications in order for the clip-ons to be fitted properly and to have the required amount of clearance with the fairings, gauges and other parts of the motorcycle. We have noted some models with known interference issues. If you have any questions about your model, please give us a call and we would be happy to assist you. Aprilia Kawasaki continued... KTM RS250 50 Ninja 650 (06+) 41S Superduke 48 Mille 53 ZX6E (93+) 41 RC8 51*^ Mille R / RSVR 51 ZX6R (95-97) 41 Ohlins RSV4 51^^ ZX6R (98-02) 46 SB Forks (Pre-95) 51 Falco / Tuono 53 ZX6R (03-08) 50 SB Forks (96-03) 53.5 RSVR (Showa) 53 ZX6R (09+) 51 SB Forks 04+ 52 Buell ZX7R (91-03) 52 Triumph M2 Cyclone 43 ZX9R (94-97) 52 Speed Triple (Pre-04) 45 S1, S2 (95-98) 54* ZX9R (98-03) 46 Speed Triple (05-06) 50 or 52** Firebolt 54 ZX10R (04+) 50 **Must Measure Forks 1125 54 ZRX1100/1200 43 Speed Triple (07+) 52 BMW Suzuki Daytona 675 50 S1000RR 55* GS500 37 Street Triple 50 Ducati GSXR600 (94-96) 50 Thruxton (08-11) 41 620-1000SS 50 GSXR600 (97-03) 45 White Bros Monster (93-09) 50 GSXR600 (04-05) 50 SB Forks 54 Monster 696/796/1100 MAP 748/749/916/996/998/999 53 GSXR600 (06-10) 48/50 Yamaha 848/1098/1198/ Panigale S 53 GSXR600 (11+) 50 TZ250 52 Panigale Std 57 GSXR750 (93-05) 50 FZR400,600 38 Honda GSXR750 (06-10) 48/50 R6 (99-04) 43 CBR600 F1/F2 41 GSXR750 (11+) 50 R6 (05) 50 CBR600 F4/F4I 43* GSXR1000 (01-04) 49/50* R6 (06+) 50^^ CBR600RR (03-04) 45 GSXR1000 (05-06) 50 YZF750 50 CBR600RR (05-06) 48 GSXR1000 (07-08) 50^^ R1 (98-02) 50 CBR600RR (07+) 48^ GSXR1000 (09+) 50 R1 (04+) 50*^^ CBR1000RR (04-07) 50 GSXR1100 50 * Interference issue with stock CBR1000RR (08+) 50^ SV650 41^^ bodywork Kawasaki SV650S 41 ^ Require risers EX250 (88-07) EX36 SV1000 (03+) 46 ^^ Cannot use risers EX250/300 (08+) 37^ TL1000R/S 50 MAP=Monster Adapter Plate EX500 (87-93) EX36 Hayabusa 50 Woodcraft does not guarantee clip-on fitment. This chart is a reference EX500 (94+) EX37 tool for fork tube sizes.
Chris Ormonde CCS #617 Chris Ormonde CCS Potter Clayton 6 Hand Guards Clamps to any 7/8” handlebar
Approved
Now required by AMA Pro Racing, Canadian Superbike, British Superbike, FIM and MotoGp Patent Pending Our new line of hand guards are designed to prevent a common and often violent crash on the race track when two riders make contact. Our exclusive design is easily mounted, durable and 1” of adjustment adjustable. to fit all levers New for 2013! Colored Guards Safety Just about everyone we talked to knows someone who has crashed due to their brake lever coming into contact with another rider. Our new hand guard line not only prevents inadvertant lever contact but also helps to protect your hands during a crash by keeping them out of harms way. We have a few friends whose pinky fingers have been “shortened” in a crash....
Adjustability Our patent-pending design mounts to any 7/8” handlebar and is adjustable for any sized levers. The unique 30 degree down angle helps to keep the guards from interfering with the riders hands while on the track.
Durability Each mount is machined from tough 6061-T6 aluminum with a durable anodized finish. The guards are made from a special plastic that is tough enough to withstand an impact but pliable enough not to splinter in a crash. Replacement plastic guards are available individually.
Lever Guard Part Number Lever Guard Kit (LH+RH) BLK 15-0100 “After watching the Daytona 200 in 2011, I Lever Guard Kit (LH+RH) Blue 15-0200 never want to race without a set of these on my bike ever again” - T.S. Lever Guard Kit (LH+RH) Green 15-0300 Lever Guard Kit (LH+RH) Red 15-0400 Lever Guard Kt (LH+RH) Yellow 15-0500 Lever Guard Kit (LH+RH) Silver 15-0600 Right Hand Guard Kit 15-010(X)RSA* Left Hand Guard Kit 15-010(X)LSA* Replacement Plastic Guard LH 15-050(X)L* Replacement Plastic Guard RH 15-050(X)R* Extra Long Black Bar Tubes 13-4105
*To order replacement parts, please the number for your color of choice in place of the (X). Example: 15-0103RSA = RH Guard Kit in Green
What do I need a left side hand guard for??
7 Foot Controls
These foot controls are made in the USA and are one of the most vital connections you have Rearsetby CFMotorsports Kits with your motorcycle. As a result Woodcraft designs and builds the best rearsets available to give you the clearance, feel and durability that today’s riders demand.
Our rearset kits can use OEM pedals (whenever possible) to give you less expensive puchase options and to make spares easy to find. Our Full Kits include Woodcraft’s 3-piece pedals, giving you a even stronger assembly and con- tinuing our tradition of easy part replacement. New For 2013 : High Grip Break-Away Footpegs Now available on most rearsets. These pegs are designed to break off in a crash, saving the rearset bracket while still leaving enough peg to finish the race or ride back to the pits. Toughness CFMotorsports rearset kits are CNC machined from 6061-T6 billet aluminum and offer more than twice the durability of OEM rearset brackets. 6061-T6 is not only strong, but can bend without cracking, making our kits repairable. Billet 6061-T6 Confidence Our knurled footpegs give supreme feedback and some of the best traction available today. Footpegs feature a raised lip at the end for optimum grip, especially in the rain. Parts Accessibility Many kits will accept the OEM levers and footpegs for no-hassle spares. Woodcraft will sell any individual piece for replacement parts. Replaceable Pegs Race Proven Full Kits include 3-piece Pedals Each kit is custom tailored for rise and setback. CFMotorsports rearsets have proven their worth with hundreds of National and Regional Championships.
Upgradable Our rearset kits are upgradable to fit any budget. Save money by choosing from one of our basic kits or upgrade to a full rearset. Our full rearset kits can be further upgraded with our folding pedal tips or matching brake side heel guards*.
*Billet heel guards are not available for all models. Check for model availability in our rearset chart.
Legend GP = GP shift only SLV = Silver STD = Standard shift only [1] = KIt comes w/shift pedal No GP or STD Listed = Works either way [2] = Kit comes w/brake pedal BLK = Black
What is GP-shift? GP-shift is the common term for reversing the shift pattern of your motorcycle. A bike equipped with GP-shift engages first ? gear by pulling UP on the shift lever and is primarily done for racetrack applications. “I’ve been through 3 crashes - 1 of which totaled the bike but the rearsets held up perfectly!”- Jimmy Wood 8 Rearset Kits Foot Controls by CFMotorsports Optional Rise Up & Pedals Fit Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back OEM Braket? RS125 GP • SLV ------05-0731B 06-0801 OEM ------Adjustable Brake Only RS250 • SLV 05-0700 05-0700B 06-0700 07-1225 ------1”, 1” No Aprilia Mille 1998-03 / Tuono 2002-05 • SLV 05-0710 ------06-0300 OEM ------.5”, .5” No Mille 1998-03 / Tuono 2002-05 GP • SLV 05-0712 [1] ------06-0300 07-2600 ------.5”, .5” No Tuono 2006-11 • SLV 05-0720 ------06-0300 OEM ------.5”, .5” No Tuono 2006-11 • SLV 05-0722 [1] ------06-0300 07-0675 ------.5”, .5” No Factory/R 2004-11 • SLV 05-0720 ------06-0300 OEM ------.5”, .5” No Factory/R 2004-11 GP • SLV 05-0722 [1] ------06-0300 07-0675 ------.5”, .5” No RSV4 08-10 • SLV ------05-0740B 06-0811 07-0625 ------Adjustable Brake Only RSV4 APRC 11+ GP • SLV ------05-0741B 06-0811 07-0118 ------Adjustable Yes RSV4 APRC 11+ STD • SLV ------05-0742B 06-0811 07-0130 ------Adjustable Yes
Optional Rise Up & Pedals Fit Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back OEM Braket?
BMW S1000RR STD • BLK ------05-0750B 06-4801 OEM ------Adjustable No S1000RR GP • BLK ------05-0751B 06-4801 OEM ------Adjustable No S1000RR STD/GP Race Only • BLK ------05-0752B 06-4801 07-3752 ------Adjustable No
Optional Rise Up & Pedals Fit Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back OEM Braket?
Buell XB9 / XB12 STD • SLV ------05-0800B 06-0800 07-2178 ------Adjustable No XB9 / XB12 GP • SLV ------05-0805B 06-0800 07-2178 ------Adjustable No
Optional Rise Up & Pedals Fit Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back OEM Braket? Monster 696 /796/ 1100 • BLK ------05-0660B 06-4801 07-2550 ------Adjustable No Ducati 750 / 900SS 1991-98 • SLV 05-0600 05-0600B 06-0300 07-2750 ------1”, 1” Yes 750 / 800 / 900 / 1000SS 1999-06 • SLV 05-0620 05-0620B 06-0800 07-2550 ------Adjustable Yes Paul Smart Replica/Sport Classic 06 • SLV 05-0620 05-0620B 06-0800 07-2550 ------Adjustable Yes 748 / 916 / 996 / 998 • SLV 05-0610 [1] 05-0610B 06-0610 OEM ------Adjustable Brake only 749 / 999 • BLK 05-0625 [1] 05-0625B 06-4811 07-2750 ------Adjustable Brake only 848 / 1098 / 1198 • BLK 05-0640 [1] 05-0640B 06-4811 OEM ------Adjustable Brake only 848 / 1098 / 1198 • SLV 05-0640A [1] 05-0640BA 06-0811 OEM ------Adjustable Brake only Hypermotard • BLK ------05-0650B 06-4811 07-0275 ------Adjustable No Panigale STD • BLK ------05-0645B 06-4801 OEM ------Adjustable No Panigale GP • BLK ------05-0646B 06-4801 OEM ------Adjustable No Diavel STD • BLK ------05-0670B 06-4670 OEM ------Adjustable No Honda Diavel GP • BLK ------05-0671B 06-4670 OEM ------Adjustable No
Optional Rise Up & Pedals Fit Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back OEM Bracket? CBR600F2 / F3 1991-98 • SLV 05-0300 ------06-0300 07-0925 ------1”, 1” No 06-0300 (L) CBR600 F4 1999-2000 • SLV 05-0330 05-0330B 06-0301 (R) 07-0850 ------1.25”, 1” Yes 06-0300 (L) CBR600 F4i 2001-06 • SLV 05-0330 05-0332B 06-0301 (R) 07-0850 ------1.25”, 1” Yes CBR600RR 2003-2006 • SLV 05-0335 [1] 05-0335B 06-0360 07-2875 ------1”, 1.25” No 06-4361 (L) CBR600RR 2007+ • BLK 05-0338 [1] 05-0338B 06-4301 (R) 07-2925 ------Adjustable No NT647 Hawk (Doesn’t work w/Stock Exhaust) • SLV 05-0320 ------06-0300 07-0675 ------1.375”, 1” No 06-0300 (L) RC51 • SLV 05-0340 ------06-0301 (R) OEM ------1”, .5” No CBR 250 STD • BLK 05-0375 05-0375B 06-4801 07-0675 ------Adjustable No CBR 250 GP • BLK 05-0376 05-0376B 06-4801 07-0600 ------Adjustable No
9 Legend : [1] Designates kit comes with shift pedal. 3-piece Pedals by CFMotorsports
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal Tip Pedal Tip Shaft Pedal tip Pedal Tip RS125 2006+ • SLV 08-0731 08-1145 08-0899 08-7899A 09-0730 09-1330 08-0099 08-7099A RS250 • SLV 08-0700 08-2099 08-0099 08-7099A 09-0700 09-1099 08-0099 08-7099A
Aprilia Mille 1998-03 / Tuono 2002-05 • SLV 08-0712 08-1199 08-0099 08-7099A ------08-0099 08-7099A Mille 1998-03 / Tuono 2002-05 GP • SLV 08-0722 08-1199 08-0099 08-7099A ------08-0099 08-7099A Tuono 2006+ • SLV ------08-0099 08-7099A ------08-0099 08-7099A Tuono 2006+ GP • SLV 08-0712 08-1199 08-0099 08-7099A ------08-0099 08-7099A Factory/R 2004+ • SLV ------08-0099 ------08-0099 ------Factory/R 2004+ GP • SLV 08-0712 08-1199 08-0099 08-7099A ------08-0099 08-7099A RSV4 • SLV 08-0740 08-1145 08-0899 08-7899A 09-0740 09-1330 08-0099 08-7099A RSV4 APRC 11+ GP • SLV 08-0741 08-1145 08-0899 08-7899A 09-0740 09-1330 08-0099 08-7099A RSV4 APRC 11+ STD • SLV 08-0740 08-1145 08-0899 08-7899A 09-0740 09-1330 08-0099 08-7099A
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal tip Pedal Tip Shaft Pedal Tip Pedal Tip
BMW S1000RR GP • BLK 08-0751 08-4145 08-4899 08-7899 09-0750 09-4330 08-4099 08-7099 S1000RR STD • BLK 08-0750 08-4145 08-4899 08-7899 09-0750 09-4330 08-4099 08-7099 S1000RR Race Only • BLK 08-0752 09-4145 08-4899 08-7899 09-0750 09-4330 08-4099 08-7099
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal Tip Pedal Tip Shaft Pedal Tip Pedal TIp
Buell XB9 / XB12 STD • SLV 08-0800 08-1800 08-0899 08-7899A 09-0800 09-1099 08-0099 08-7099A XB9 / XB12 GP • SLV 08-0805 08-1805 08-0899 08-7899A 09-0800 09-1099 08-0099 08-7099A
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal Tip Pedal Tip Shaft Pedal Tip Pedal Tip Monster 696 / 1100 • BLK 08-0660 08-4145 08-4899 08-7899 09-0660 08-4660* 08-4899 08-7899
Ducati 750 / 900SS 1991-98 • SLV 08-0600 08-1199 08-0099 08-7099A 09-0600 09-1099 08-0099 08-7099A 750/800/900/1000 99-07 • SLV 08-0620 08-1620 08-0899 08-7099A 09-0620 09-1620 08-0099 08-7099A Paul Smart Replica/Sport Classic 06 08-0620 08-1620 08-0899 08-7099A 09-0620 09-1620 08-0099 08-7099A 748/916/996/998 • SLV 08-0610 08-1199 08-0099 08-7099A 09-0610 08-1620 08-0099 08-7099A 749/999 • BLK 08-0625 08-4620 08-4899 08-7899 09-0625 09-4620 08-4099 08-7099 848/1098/1198 • BLK 08-0640 08-4620 08-4899 08-7899 09-0640 09-4620 08-4099 08-7099 848/1098/1198 • SLV 08-0640A 08-1620 08-0899 08-7899A 09-0640A 09-1620 08-0099 08-7099A Hypermotard • BLK 08-0650 08-4145 08-4899 08-7899 09-0650 08-4247* 08-4899 08-7899 Panigale STD • BLK 08-0645 08-4145 08-4899 08-7899 09-0645 09-4145 08-4899 08-7899 Panigale GP • BLK 08-0646 08-4145 08-4899 08-7899 09-0645 09-4145 08-4899 08-7899 Diavel STD • BLK 08-0670 08-4145 08-4099 08-7899 09-0645 09-4145 08-4899 08-7899 Diavel GP • BLK 08-0671 08-4145 08-4099 08-7899 09-0645 09-4145 08-4899 08-7899
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal Tip Pedal TIp Shaft Pedal Tip Pedal Tip CBR600F2 / F3 1991-98 • SLV ------Honda CBR600 F4 1999-00 • SLV 08-0330 08-1199 08-0099 08-7099A 09-0330 09-1330 08-0099 08-7099A CBR600 F4i 2000-06 • SLV 08-0330 08-1199 08-0099 08-7099A 09-0332 09-1330 08-0099 08-7099A CBR600RR 2003-06 • SLV 08-0335 08-1335 08-0099 08-7099A 09-0335 09-1099 08-0099 08-7099A CBR600RR 2007+ • BLK 08-0338 08-4335 08-4099 08-7099 09-0338 09-4330 08-4099 08-7099
NT647 Hawk (Doesn’t work w/Stock Exhaust) • SLV ------RC51 • SLV ------Honda CBR250 STD • BLK 08-0375 08-4145 08-4899 08-7899 09-0375 09-4145 08-4899 08-7899 Honda CBR250 GP • BLK 08-0375 08-4145 08-4899 08-7899 09-0375 09-4145 08-4899 08-7899
Legend : [1] Designates kit comes with shift pedal. 10 Rearset Kits Foot Controls by CFMotorsports Optional Rise Up & Pedals Fit Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back OEM Bracket?
Honda CBR1000RR 2004-07 • SLV ------05-0337B 06-0360 07-28375 ------1”, .5” No CBR1000RR 2008+ • BLK 05-0339 [1] 05-0339B 06-4301 07-2750 ------1”, .5” No
Optional Rise Up & Pedals Fit OEM Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back Brackets? 06-4610 (L) EX250 1988-07 • BLK 05-4130 05-4130B 06-4611 (R) 07-0650 ------1”, 2” No Kawasaki 06-4610 (L) EX250/300 2008+ • BLK 05-4131E 05-4131EB 06-4611 (R) 07-0625 ------1”, 2” No 06-0610 (L) EX250 1988-07 • SLV 05-0130 05-0130B 06-0611 (R) 07-0650 ------1”, 2” No EX500 1994+ • SLV 05-0120 ------06-0300 07-0675 ------1”, 2” No 06-4128 (L) Ninja 650R 2006-08 • BLK 05-4128 [1] 05-4128B 06-4301 (R) 07-1100 ------Adjustable No 06-0128 (L) Ninja 650R 2006-08 • SLV 05-0128 [1] 05-0128B 06-0301 (R) 07-1100 ------Adjustable No 06-4128 (L) Ninja 650R 2009+ • BLK 05-0129 [1] 05-0129B 06-4301 (R) 07-1100 ------Adjustable No ZX6R 1995-97 • SLV 05-0100 ------06-0110 07-0850 ------1”, .5” No 06-0112 (L) ZX6R 1998-02 • SLV 05-0110 05-0110B 06-0110 (R) 07-2775 ------1”, 1” No 06-0112 (L) ZZR600 2005-08 • SLV 05-0110 05-0110B 06-0110 (R) 07-2775 ------1”, 1” No 06-0112 (L) ZX6RR / 636 2003-04 • SLV 05-0140 05-0140B 06-0110 (R) 07-2775 ------.5”, .5” No ZX6R / 636 2005-06 • SLV 05-0145 05-0145B 06-0801 07-2625 ------Adjustable Yes ZX6R 2007-08 • BLK 05-0147 05-0147B 06-4801 07-2650 ------Adjustable Yes ZX6R 2009+ • BLK 05-0149 [2] 05-0149B 06-4801 07-2700 ------Adjustable No ZX7R 1991-04 • SLV 05-0100 ------06-0110 07-0850 ------1”, .5” No ZX9R 1994-97 • SLV 05-0100 ------06-0110 07-0850 ------1”, .5” No 06-0112 (L) ZX9R 1998-03 • SLV 05-0110 05-0110B 06-0110 (R) 07-2775 ------1”, 1” No ZX10R 2004-05 • SLV 05-0160 05-0160B 06-0801 07-0775 ------Yes ZX10R 2006-10 • BLK 05-0165 05-0165B 06-4801 07-2725 ------Yes ZX10R 2011+ STD •BLK ------05-0168B 06-4801 OEM ------Adjustable Yes ZX10R 2011+ GP •BLK ------05-0169B 06-4801 OEM ------Adjustable Yes
Optional Rise Up & Pedals Fit OEM Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back Brakets? 675 / Street Triple / R STD • BLK ------05-0500B 06-4801 07-0875 05-0500HGB Adjustable No
Triumph 675 / Street Triple / R GP • BLK ------05-0501B 06-4801 07-0575 05-0500HGB Adjustable No Daytona 675 2013 ------05-0502B TBA TBA TBA TBA TBA
Optional Rise Up & Pedals Fit OEM Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back Brakets?
Suzuki SV650 1999-02 • SLV 05-0220 05-0220B 06-0200 07-0775 05-0240HGB 1.5”, 1.5” Yes SV650 1999-02 High • SLV 05-0222 05-0222B 06-0200 07-0825 05-0240HGB 2”, 2” Yes SV650S 1999-02 • SLV 05-0220 05-0220B 06-0200 07-0775 05-0240HGB .75”, .75” Yes SV650S 1999-02 High • SLV 05-0222 05-0222B 06-0200 07-0825 05-0240HGB 1.25”, 1.25” Yes SV650 2003 • SLV 05-0224 05-0224B 06-0200 07-0775 05-0240HGB 1.25”, 1.25” Yes SV650s 2003 • SLV 05-0224 05-0224B 06-0200 07-0775 05-0240HGB .75”, .75” Yes SV650 2004+ • SLV ------05-0224B 06-0200 07-0775 05-0240HGB 1.25”, 1.25” No SV650S 2004+ • SLV ------05-0224B 06-0200 07-0775 05-0240HGB .75”, .75” No SV650 2003 • BLK 05-4224 05-4224B 06-4200 07-0775 05-0249HGB 1.25”, 1.25” Yes 11 3-piece Pedals by CFMotorsports
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal Tip Pedal TIp Shaft Pedal Tip Pedal Tip
Honda CBR1000RR 2004-07 • SLV 08-0335 08-1335 08-0099 08-7099A 09-0335 09-1099 08-0099 08-7099A CBR1000RR 2008+ • BLK 08-0339 08-4145 08-4899 08-7899 09-0339 09-4330 08-4099 08-7099
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal Tip Pedal Tip Shaft Pedal Tip Pedal Tip
EX250 1988-07 • BLK 08-4130 08-4145 08-4899 08-7899 09-4130 09-4330 08-4099 08-7099 Kawasaki EX250/300 2008+ • BLK 08-4131 08-4145 08-4899 08-7899 09-4130 09-4330 08-4099 08-7099
EX250 1988-07 • SLV 08-0130 08-1145 08-0899 08-7899A 09-0130 09-1330 08-0099 08-7099A
EX500 1994+ • SLV ------
Ninja 650R 2006-08 • BLK 08-4128 08-4199 08-4099 08-7099 09-4128 09-4330 08-4099 08-7099
Ninja 650R 2006-08 • SLV 08-0128 08-2099 08-0099 08-7099A 09-0128 09-1330 08-0099 08-7099A
Ninja 650R 2009 + • BLK 08-4128 08-4199 08-4099 08-7099 09-4128 09-4330 08-4099 08-7099
ZX6R 1995-97 • SLV ------
ZX6R 1998-02 • SLV 08-0110 08-2099 08-0099 08-7099A 09-0110 09-1099 08-0099 08-7099A
ZZR600 2005-08 • SLV 08-0110 08-2099 08-0099 08-7099A 09-0110 09-1099 08-0099 08-7099A
ZX6R/RR/636 1998-04 • SLV 08-0110 08-2099 08-0099 08-7099A 09-0110 09-1099 08-0099 08-7099A
ZX6R/636 2005-06 • SLV 08-0145 08-1145 08-0899 08-7899A 09-0145 09-1330 08-0099 08-7099A ZX6R/636 2007-08 • BLK 08-0147 08-4145 08-4899 08-7899 09-0147 09-4330 08-4099 08-7099 ZX6R 2009+ • BLK 08-0147 08-4145 08-4899 08-7999 09-0149 08-4247 08-4899 08-7899 ZX7R 1991-04 • SLV ------ZX9R 1994-97 • SLV ------
ZX9R 1998-03 • SLV 08-0110 08-2099 08-0099 08-7099A 09-0110 09-1099 08-0099 08-7099A
ZX10R 2004-05 • SLV 08-0160 08-1335 08-0099 08-7099A 09-0160 09-1330 08-0099 08-7099A ZX10 2006-10 • BLK 08-0165 08-4145 08-4899 08-7899 09-0165 09-4330 08-4099 08-7099 ZX10R 2011+ STD •BLK 08-0168 08-4145 08-4899 08-7899 09-0168 09-4330 08-4099 08-7099 ZX10R 2011+ GP •BLK 08-0168 08-4145 08-4899 08-7899 09-0168 09-4330 08-4099 08-7099
Repl. Shift Standard Folding Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Pedal Tip Pedal Tip Shaft Pedal Tip Pedal Tip 675 / Street Triple / R STD • BLK 08-0500 08-4145 08-4899 08-7899 09-0500 09-4330 08-4099 08-7099 Triumph 675 / Street Triple / R GP • BLK 08-0501 08-4145 08-4899 08-7899 09-0500 09-4330 08-4099 08-7099 Daytona 675 2013 TBA TBA TBA TBA TBA TBA TBA TBA
Repl. Shift Standard Folding Toe Repl. Brake Standard Folding Model • Color Shift Pedal Brake Pedal Shaft Toe Piece Piece Shaft Toe Piece Toe Piece
Suzuki SV650 1999-02 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650 1999-02 High • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650S 1999-02 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650S 1999-02 High • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650 2003 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650s 2003 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650 2004+ • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650S 2004+ • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV650 2003 • BLK 08-4200 08-4199 08-4099 08-7099 09-4200 09-4099 08-4099 08-7099 12 Rearset Kits Foot Controls by CFMotorsports Optional Rise Up & Pedals Fit OEM Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back Brakets? SV650s 2003 • BLK 05-4224 05-4224B 06-4200 07-0775 05-0249HGB .75”, .75” Yes Suzuki SV650 2004+ • BLK ------05-4224B 06-4200 07-0775 05-0249HGB 1.25”, 1.25” No SV650S 2004+ • BLK ------05-4224B 06-4200 07-0775 05-0249HGB .75”, .75” No SV1000 2003-07 • SLV 05-0226 05-0226B 06-0200 07-0825 05-0240HGB 1.25”, 1.25” Yes (03 only) SV1000S 2003-07 • SLV 05-0226 05-0226B 06-0200 07-0825 05-0240HGB .75”, .75” Yes (03 only) SV1000 2003-07 • BLK 05-4226 05-4226B 06-4200 07-0825 05-0249HGB 1.25”, 1.25” Yes (03 only) SV1000S 2003-07 • BLK 05-4226 05-4226B 06-4200 07-0825 05-0249HGB .75”, .75” Yes (03 only) GSX-R600 1997-00 • SLV 05-0220 05-0220B 06-0200 07-0775 05-0240HGB .75”, .75” Yes GSX-R600 2001-05 • SLV 05-0240 05-0240B 06-0200 07-0750 05-0240HGB .5”, .5” Yes 06-4301 (L) GSX-R600 2006-10 • BLK 05-0247 [1] 05-0247B 06-4245 (R) OEM 05-0249HGB Adjustable Yes
06-4301 (L) GSX-R600 2011+ • BLK 05-0250 [1] 05-0250B 06-4245 (R) OEM 05-0249HGB Adjustable Shift Only
GSX-R750 1996-99 • SLV 05-0220 05-0220B 06-0200 07-0775 05-0240HGB .75”, .75” Yes GSX-R750 2000-05 • SLV 05-0240 05-0240B 06-0200 07-0750 05-0240HGB .5”, .5” Yes 06-4301 (L) GSX-R750 2006-10 • BLK 05-0247 [1] 05-0247B 06-4245 (R) OEM 05-0249HGB Adjustable Yes 06-4301 (L) GSX-R750 2011+ • BLK 05-0250 [1] 05-0250B 06-4245 (R) OEM 05-0249HGB Adjustable Shift only GSX-R1000 2001-04 • SLV 05-0240 05-0240B 06-0200 07-0750 05-0240HGB .5”, .5” Yes GSX-R1000 2005-06 • SLV 05-0245 05-0245B 06-0245 07-0160 05-0240HGB .5”, .5” No
[1] Designates kit GSX-R1000 2007-08 • BLK 05-0249 05-0249B 06-4245 07-0725 05-0249HGB Adjustable No 06-4301 (L) comes with shift GSX-R1000 2009+ • BLK 05-0250 [1] 05-0250B OEM 05-0249HGB Adjustable Shift only pedal. 06-4245 (R) TL1000S • SLV 05-0210 05-0210B 06-0200 07-0850 05-0240HGB .75”, .75” Yes TL1000R • SLV 05-0212 05-0212B 06-0200 07-0750 05-0240HGB .75”, .75” Yes
Optional Rise Up & Pedals fit OEM Model • Color Rearset Kit Rearset Kit w/pedals Repl. Pegs Shift Rod Heel Guard Back brackets? FZR400 / 600 • SLV 05-0410 ------06-0410 07-0675 ------1”, 1” No
Yamaha 06-0300 (L) R6 1999-02 STD • SLV 05-0440 05-0440B 06-0420 (R) 07-0440 .625”, .625” Yes 06-0300 (L) R6 1999-02 GP • SLV 05-0442 05-0442B 06-0420 (R) 07-0442 ------.625”, .625” Yes 06-0300 (L) R6/R6S 2003-05 • SLV 05-0447 05-0447B 06-0420 (R) 07-0445 ------.625”, .625” Yes 06-4300 (L) R6/R6S 2003-05 • BLK 05-4447 05-4447B 06-4420 (R) 07-0445 ------.625”, .625” Yes 06-4300 (L) R6 2006+ STD • BLK 05-0448 [1] 05-0448B 06-4420 (R) 07-21025 ------.625”, .625” No 06-4300 (L) R6 2006+ GP • BLK 05-0449 [1] 05-0449B 06-4420 (R) 07-10625 ------.625”, .625” No R1 1998 STD • SLV 05-0420 ------06-0420 07-0420 ------.875”, .5” No R1 1998 GP • SLV 05-0422 ------06-0420 07-0422 ------.875”, .5” No R1 1999-01 • SLV 05-0420 ------06-0420 07-0420 ------.875”, .5” No R1 2002-03 STD • SLV 05-0424 ------06-0420 07-0424 ------.875”, .5” No R1 2002-03 GP Conversion Kit 08-0424 Kit combines with 05-0424 to make GP kit ------No R1 2004-06 • SLV 05-0425 05-0425B 06-0425 07-0425 ------1”, .5” Yes R1 2004-06 GP Conversion Kit 08-0427 Kit combines with 05-0425 to make GP kit ------Yes 06-4425 (L)
R1 2007-08 STD BLK* 05-0428 [1] 05-0428B 06-4301 (R) 07-0425 05-0428HGB 1”, .5” Brake only 06-4425 (L) R1 2007-08 GP • BLK* 05-0429 [1] 05-0429B 06-4301 (R) 07-2115 05-0428HGB 1”, .5” Brake only R1 2009+ • BLK 05-0452 [1] 05-0452B 06-4801 07-2725 05-0452HG Adjustable Yes 13 3-piece Pedals by CFMotorsports
Repl. Shift Standard Toe Folding Toe Repl. Brake Standard Folding Toe Pi Model • Color Shift Pedal Brake Pedal Shaft Piece Piece Shaft Toe Piece ece SV650s 2003 • BLK 08-4200 08-4199 08-4099 08-7099 09-4200 09-4099 08-4099 08-7099 Suzuki SV650 2004+ • BLK 08-4200 08-4199 08-4099 08-7099 09-4200 09-4099 08-4099 08-7099 SV650S 2004+ • BLK 08-4200 08-4199 08-4099 08-7099 09-4200 09-4099 08-4099 08-7099 SV1000 2003-07 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV1000S 2003-07 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A SV1000 2003-07 • BLK 08-4200 08-4199 08-4099 08-7099 09-4200 09-4099 08-4099 08-7099 SV1000S 2003-07 • BLK 08-4200 08-4199 08-4099 08-7099 09-4200 09-4099 08-4099 08-7099 GSX-R600 1997-00 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A GSX-R600 2001-05 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0240 09-1099 08-0099 08-7099A
GSX-R600 2006-10 • BLK 08-0247 08-4247 08-4899 08-7899 09-0247 09-4099 08-4099 08-7099
GSX-R600 2011+ • BLK 08-0247 08-4247 08-4899 08-7899 09-0249 09-4099 08-4099 08-7099
GSX-R750 1996-99 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A GSX-R750 2000-05 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0240 09-1099 08-0099 08-7099A
GSX-R750 2006-10 • BLK 08-0247 08-4247 08-4899 08-7899 09-0247 09-4099 08-4099 08-7099
GSX-R750 2011+ • BLK 08-0247 08-4247 08-4899 08-7899 09-0249 09-4099 08-4099 08-7099
GSX-R1000 2001-04 • SLV 08-0200 08-2099 08-0099 08-7099A 09-0240 09-1099 08-0099 08-7099A GSX-R1000 2005-06 • SLV 08-0245 08-2099 08-0099 08-7099A 09-0245 09-1099 08-0099 08-7099A GSX-R1000 2007-08 • BLK 08-0249 08-4199 08-4099 08-7099 09-0249 09-4099 08-4099 08-7099
GSX-R1000 2009+ • BLK 08-0247 08-4247 08-4899 08-7899 09-0249 09-4099 08-4099 08-7099
TL1000S • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A TL1000R • SLV 08-0200 08-2099 08-0099 08-7099A 09-0200 09-1099 08-0099 08-7099A
Repl. Shift Standard Toe Folding Toe Repl. Brake Standard Folding Toe Model • Color Shift Pedal Brake Pedal Shaft Piece Piece Shaft Toe Piece Piece FZR400 / 600 • SLV ------
Yamaha R6 1999-02 STD • SLV 08-0440 08-1440 08-0099 08-7099A 09-0440 09-1099 08-0099 08-7099A
R6 1999-02 GP • SLV 08-0440 08-1440 08-0099 08-7099A 09-0440 09-1099 08-0099 08-7099A
R6/R6S 2003-05 • SLV 08-0440 08-1440 08-0099 08-7099A 09-0445 09-1099 08-0099 08-7099A
R6/R6S 2003-05 • BLK 08-4440 08-1449 08-4099 08-7099 09-4445 09-4099 08-0099 08-7099
R6 2006+ STD • BLK 08-0448 08-1449 08-4099 08-7099 09-0449 09-4099 08-4099 08-7099
R6 2006+ GP • BLK 08-0449 08-1449 08-4099 08-7099 09-0449 09-4099 08-4099 08-7099
R1 1998 STD • SLV ------R1 1998 GP • SLV ------R1 1999-01 • SLV ------R1 2002-03 STD • SLV ------R1 2002-03 GP Conversion Kit ------R1 2004-06 • SLV 08-0425 08-1335 08-0099 08-7099A 09-0445 09-1099 08-0099 08-7099A R1 2004-06 GP Conversion Kit ------
R1 2007-08 STD • BLK 08-0428 08-4335 08-4099 08-7099 09-0428 09-4330 08-4099 08-7099
R1 2007-08 GP • BLK 08-0429 08-4335 08-4099 08-7099 09-0428 09-4330 08-4099 08-7099
R1 2009+ • BLK 08-0452 08-4247 08-4899 08-7899 09-0452 09-4099 08-4099 08-7099 14 Foot Controls Rearset Accessories by CFMotorsports Folding Pedal Tips Our new pedal folding tip design helps protect the pedals in a crash. The folding design minimizes the tendency to catch, preventing damage. The stiff internal spring provides a solid feel for shifting, braking and keeps the pedal locked in the forward position where it belongs. The new rubber tip is easy on your boots and provides extra grip.
NOTE: Our new folding pedals tips can easily be added to any Woodcraft-CFM 3-piece pedal.
Eccentric Folding Pedal Tips Part Number Standard Folding Tip • BLK 08-7099 Standard Folding TIp • SLV 08-7099A Eccentric Folding TIp • BLK 08-7899 Eccentric Folding Tip • SLV 08-7899A
Add the protection of folding tips to any Woodcraft rearset kit
Standard
Brake Switches & Pedal Springs Brake Light Switches These parts make it possible to retain the rear brake light function when using our Woodcraft Rearset Kits. The switch is pressure activated and replaces the banjo bolt that connects the rear brake line to the rear master cylinder. Please call if you are unsure of your bike’s thread-type and we’ll gladly assist you. You may also check out our Application Guides at www.woodcraft-cfm.com. Pedal Return Springs For those riders who prefer a positive feel of a return spring when using their rear brake. We offer our Pedal Return Spring Kits which can be fitted to many of our Rearset Kits.
Pedal Return Spring Kits Part Number Brake Light Switch Part Number Yamaha R1, R6 (fits most) 09-7125 Coarse Thread Switch 10x1.25mm 03-0100 Suzuki (fits most models) 09-7175 Fine Thread Switch 10x1.00mm 03-0105
“I really like the multiple pieces..easy to fix!”- DL 15 Case Covers
Woodcraft Case Covers are designed to add strength, protect your motorcycle and look great. These covers are meticulously produced in the USA out of the very best materials available. These covers help ensure that when your bike hits the ground the vital fluids stay inside the motor and the gravel will stay out, allowing you to get back to riding as soon as possible.
Replaceable Skid Pads Lightweight Woodcraft Case Covers feature patented replaceable skid pads in both stainless steel (for racing durability & ground clearance) or Double Thick Aluminum (street looks with extra thick protection).
Increased Internally Bolted Protection A Woodcraft exclusive! These O-ring sealed bolts make sure that a incident will not leave you drilling out mounting bolts that were ground smooth in the crash. Attention to Detail These covers get the extra attention needed to make them light- weight and great looking. A head-turning addition for both street and race bikes!
Customizable Any cover can be ordered with any skid pad, meaning you can customize the cover to suit your bike. Black covers with red pads? Aluminum with black? Be creative and make your bike an original!
Skid Pads All of our Case Covers come with either a stainless steel or aluminum skid pad (default is stainless). You have the option to choose whatever Skid Plate you’d like in both material and Patented Replaceable Skid Pads color! Internal mounting Skid Pad bolts Cover Protectors For many models, there are covers (like the RSV4 cover below) that are too big to make a cost effective full cover. For these models, Skid Pad Color Code Suffix Woodcraft is making protectors, most complete with our patented skid Original Stainless S pads and industry exclusive high temp rubber pads on the back side! Natural Aluminum A Black Aluminum B Blue Aluminum C Red Aluminum R Example 65-0160S
Notes- > Important Ordering Instructions: 1) Choose your Cover (black anodized is standard, some models offered in silver). ! 2) Select your Skid Pad & add suffix to Part Number. > If you do not select a Skid Pad a stainless pad will be sent by default. > All covers include the gasket (if needed) & Skid Pad (SS or Aluminim) at no extra cost!
Products for sportbikes that make sense! www.woodcraft-cfm.com 16 Case Covers Legend CC = Crank Cover CLP = Clutch Cover Protector IT = Ignition Trigger Cover S = Stator Cover CCP = Crank Cover Protector IG = Starter Idle Gear Cover OP = Oil Pump Cover ICP = Ignition Cover Protector CL = Clutch Cover SCP=Stator Cover Protector
Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum RSV4 Left SCP ------60-0740LB None 65-0249S 65-0249 + suffix Aprilia Right CLP ------60-0740RB None None 65-0335 + suffix
Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum
BMW S1000RR Left SCP ------60-0750LB None 65-0249S 65-0249 + suffix
60-0145R Right CC ------60-0750RB None 65-0337S 65-0337 + suffix
Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum 748/749, 916/996/998/999 Right CL ------60-0640RB None 65-0249S 65-0249 + suffix
Ducati 1098 / 1198 Right CL ------60-0640RB None 65-0249S 65-0249 + suffix Supersport / Sportclassic Right CL ------60-0640RB None 65-0249S 65-0249 + suffix Multistrada /Hypermotard Right CL ------60-0640RB None 65-0249S 65-0249 + suffix 848 Right CLP ------60-0641RB None 65-0249S 65-0249 + suffix Monster 696/796/1100 Right CLP ------60-0641RB None 65-0249S 65-0249 + suffix 1199 Panigale Right CL ------60-0645RB None N/A 65-0645 + suffix 60-0245LB Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum CBR600RR 2003-06 Left S ------60-0335LB None 65-0240S 65-0240 + suffix Honda Right CLP ------60-0335RB None 65-0335S 65-0335S + suffix CBR600RR 2007+ Left S ------60-0338LB None 65-0160S 65-0160 + suffix Right CLP ------60-0338RB None 65-0249S 65-0249 + suffix CBR1000RR 04-07/ Left S ------60-0337LB None 65-0160S 65-0160 + suffix CB1000R 08+ Right CLP ------60-0337RB None 65-0249S 65-0249 + suffix CBR1000RR 2008-09 Left S ------60-0339LB None 65-0160S 65-0160 + suffix 60-0640L Left SCP ------60-0341LCB None 65-0341 65-0341 + suffix Right CLP ------60-0339RB None 65-0249 65-0249 +suffix CBR1000RR 2010+ Left SCP ------60-0341LCB None 65-0341 65-0341 + suffix Right CLP ------60-0339RB None 65-0249 65-0249 + suffix
Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum ZX6RR / 636 2003-04 Left S ------60-0140LB 61-0140L 65-0240S 65-0240 + suffix Right IT 60-0145R 60-0145RB 61-0145R 65-0160S 65-0160 + suffix
60-0165RIB Kawasaki ZX6RR / 636 2005-06 Left S ------60-0145LB 61-0145L 65-0240S 65-0240 + suffix Right IT 60-0145R 60-0145RB 61-0145R 65-0160S 65-0160 + suffix ZX6R 2007-08 Left S ------60-0147LB 61-0147L 65-0160S 65-0160 + suffix Right IG ------60-0147ROB 61-0147RO None None Right CCP ------60-0147RIB None 65-0335S 65-0335 + suffix ZX6R 2009+ Left S ------60-0147LB 61-0147L 65-0160S 65-0160 + suffix Right IG ------60-0147ROB 61-0147RO None None Right CCP ------60-0149RIB None None 65-0249 + suffix ZX10R 2006-10 Left S ------60-0165LB 61-0165L 65-0440S 65-0440 + suffix 60-0645RB Right IG ------60-0165RB 61-0165R None None 17 Case Covers Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum ZX10R 2008-10 Right CC ------60-0165RIB 61-0165RI 65-0160S 65-0160 + suffix ZX10R 2011+ Right IT ------60-0168RB 61-0168R 65-0160S 65-0160 + suffix Left S ------60-0168LB 61-0168L 65-0160S 65-0160 + suffix Kawasaki Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum 675 2006+ / Street Triple / R Left S ------60-0500LB 61-0500L 65-0160S 60-0160 + suffix Right IT ------60-0500RB 61-0500R 65-0440S 65-0440 + suffix Right CLP ------60-0500RC None 65-0335S 65-0335 + suffix Triumph
Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum SV650 / S 1999-02 Right CL 60-0220R 60-0220RB None 65-0440S 65-0440 + suffix 60-0249RIB Suzuki SV650 / S 2003+ Right CP ------60-0224RB None TBA TBA GSX-R600 2001-03 Left S 60-0240L 60-0240LB 61-0240L 65-0240S 65-0240 + suffix GSX-R600 1997-05 Right IG 60-0240R 60-0240RB 61-0240R None None Right CP ------60-0249RIB None 65-0249S 65-0249 + suffix GSX-R600 2004-05 Left S 60-0242L 60-0242LB 61-0242L 65-0240S 65-0240 + suffix GSX-R600 2006+ Left Out S ------60-0247LIB 61-0247LI 65-0160S 65-0160 + suffix Left In IG ------60-0247LOB 61-0247LO None None Left SCP ------60-0247LIC None TBA TBA Right CLP 60-0247R 60-0247RB None 65-0247S 65-0247 + suffix 60-0335RB GSX-R750 2000-03 Left S 60-0240L 60-0240LB 61-0240L 65-0240S 65-0240 + suffix GSX-R750 1996-05 Right IG 60-0240R 60-0240RB 61-0240R None None Right CP ------60-0249RIB None 65-0249S 65-0249 + suffix GSX-R750 2004-05 Left S 60-0242L 60-0242LB 61-0242L 65-0240S 65-0240 + suffix GSX-R750 2006+ Left Out S ------60-0247LIB 61-0247LI 65-0160S 65-0160 + suffix Left In IG ------60-0247LOB 61-0247LO None None Left SCP ------60-0247LIC None TBA TBA Right CLP 60-0247R 60-0247RB None 65-0247S 65-0247 + suffix GSX-R1000 2001-02 Left S 60-0240L 60-0240LB 61-0240L 65-0240S 65-0240 + suffix GSX-R1000 2001-08 Right IG 60-0240R 60-0240RB 61-0240R None None GSX-R1000 2001-08 Right CP ------60-0249RIB None 65-0249S 65-0249 + suffix GSX-R1000 2003-04 Left S 60-0242L 60-0242LB 61-0242L 65-0240S 65-0240 + suffix GSX-R1000 2005-08 Left S ------60-0245LB 61-0242L 65-0240S 65-0240 + suffix GSX-R1000 2009+ Left* S ------60-0250LB* 61-0250L 65-0160S 65-0160 + suffix 60-0335LCB *Needs Oil Seal Right CLP ------60-0250RB None 65-0249S 65-0249 + suffix Hayabusa/BKing Left S 60-0270LBD 60-0270LB 61-0270L 65-0440S 65-0440 + suffix
Cover Clear Black Skid Pad Skid Pad Model Type Gasket Side Anodized Anodized Stainless Aluminum R6 2003-05 Left S ------60-0445LB 61-0445L 65-0160S 65-0160 + suffix
Yamaha Right IT ------60-0445RB 61-0440R 65-0240S 65-0240 + suffix R6S 2006+ Left S ------60-0445LB 61-0445L 65-0449S 65-0160 + suffix Right IT ------60-0445RB 61-0440R 65-0240S 65-0240 + suffix R6 2006+ Left S ------60-0449LB 61-0449L 65-0440S 65-0440 + suffix Right IT ------60-0449RB 61-0449R 65-0337S 65-0337 + suffix R1 1998-03 Left S ------60-0420LB 61-0420L 65-0160S 65-0160 + suffix 60-0449LB Right IT ------60-0420RB 61-0420R 65-0160S 65-0160 + suffix R1 2004-08 & FZ1 06-12 Left ICP ------60-0450LB None 65-0335S 65-0335 + suffix Right OP ------60-0450RB 61-0450R 65-0440S 65-0440 + suffix R1 2009+ Left S ------60-0452LB 61-0452L 65-0160S 65-0160S + suffix Right IT ------60-0452RB 61-0452R 65-0337S 65-0337 + suffix 18 Frame Sliders Frame Sliders are one of the smartest modifications you can make to your bike. From street accidents to 100mph high-sides, nothing will help prevent costly damage better than a set of Woodcraft Frame Sliders. Our sliders are the only sliders on the market featuring our patented perpendicular mounting bolt design giving you, great protection, easy installation and unsurpassed durability. Durability Solid Slider Puck Woodcraft’s patented 2-piece sliders are the most durable sliders on the market. Our perpendicular mounting bolt allows the slider to be solid rather than hollow (like other sliders) which provides nearly 50% more material on the road and much longer life. Hassle Free Replacement Our 2-piece design, with its perpendicular mounting bolt, means that after a crash you won’t be digging out a ground down bolt from the center of a destroyed hollow slider. Our sliders make puck replace- ment fast and easy thanks to our patented design. Race Proven Woodcraft’s experienced racer R&D squad made it clear that sliders must stick out far enough to protect the bike but not so long they get ripped off as the bike slides down the road! The end result is all Wood- craft sliders are the ideal length giving you the protection without too Perpendicular much projection. Mounting Bolt
Cut OEM Repl. plastic Model Slider Base Kit bodywork? puck RSV/R 2004-09 50-0720 Yes 50-1099 Aprilia Tuono 2006-09 50-0720 No 50-1099 RSV4 TBA
Cut OEM Repl. plastic Model Slider Base Kit bodywork? puck Puck Style Part Number BMW S1000RR 50-0750 Right Only 50-1399 High Density Plastic (Std) 50-1099 Cut OEM Repl. plastic Model Slider Base Kit Blue Anodized Aluminum 50-1099C bodywork? puck Chrome Plated Aluminum 50-1099K Monster 696 / 1100 50-0660LG No 50-1660 Red Anodized Aluminum 50-1099R 50-0660STD No 50-1099 Polished Aluminum 50-1099A 848 / 1098 / 1198 50-0640 Yes 50-1099 Ducati CBR Short Plastic 50-1199 848 /1098 / 1198 No Cut 50-0642 No 50-1399 Short High Density Plastic 50-1399 Diavel 50-0670 No 50-1999
Cut OEM Repl. plastic Model Slider Base Kit bodywork? puck CBR600F2 50-0300 Yes 50-1099 Honda CBR600 F3 50-0305 Yes 50-1099 CBR600 F4/F4i 50-0330 Yes 50-1099 CBR600RR 2003-06 50-0335 Yes 50-1199 CBR600RR 2007+ 50-0338 Yes 50-1199 CBR1000RR 2004-07 50-0337 Yes 50-1099 CBR1000RR 2008+ 50-0339 Yes 50-1199
Notes- > All Kits can use the aluminum pucks except Kits using the 50-1199 pucks. > Important Ordering Instructions: 1) Order the Slider Base Kit for your model bike > Woodcraft recommends the slightly shorter 50-1399 high-density 2) Order two (2) Slider Pucks to complete your Kit plastic pucks for many track applications. !“I would recommend these frame sliders to anyone riding a bike on the track. We had 3 crashes at Day- tona & they did exactly what they were suppose to. They kept the bike up preventing the frame and engine 19 covers from being damaged” - Legendar y Ducati Tuner Eraldo Ferracci Frame Sliders Cut OEM Repl. plastic Cut OEM Repl. plastic Model Slider Base Kit Model Slider Base Kit bodywork? puck bodywork? puck 600RR / 636 2003-04 50-0140 Yes 50-1099 SV650/S 1999-02 50-0220 No 50-1099 Suzuki 600RR / 636 2005-06 50-0145 Yes 50-1099 SV650/S 2003+ 50-0224 No 50-1099 ZX6R 2007-08 50-0147 Yes 50-1399 SV1000/S 50-0226 No 50-1099 ZX6R 2009+ 50-0149 Left only 50-1399 GSX-R600 1997-00 50-0200 Yes 50-1099 Ninja 650R 06-08 50-0128 Yes 50-1099 GSX-R600 2001-03 50-0240 Left only 50-1099 Ninja 650R 2009-11 50-0129 Yes 50-1099 GSX-R600 2004-05 50-0240 No 50-1099 ZX10R 2004-05 50-0160 Yes 50-1099 GSX-R600 2006-07 50-0247 Yes 50-1399 ZX10R 2006-07 50-0165 Yes 50-1399 GSX-R600 2008-10 50-0248 Yes 50-1399 ZX10R 2008-10 50-0167 Yes 50-1399 GSX-R600 2011+ 50-0258 Yes 50-1199 ZX10R 2011+ 50-0168 No 50-1399 GSX-R750 1996-99 50-0200 Yes 50-1099 Kawasaki GSX-R750 2000-03 50-0240 Left only 50-1099 Cut OEM Repl. plastic Model Slider Base Kit GSX-R750 2004-05 50-0240 No 50-1099 bodywork? puck GSX-R750 2006-07 50-0247 Yes 50-1399 R6 1999-02 50-0440 Yes 50-1099
Yamaha GSX-R750 2008-10 50-0248 Yes 50-1399 R6 2003-05 50-0445 Yes 50-1099 GSX-R750 2011+ 50-0258 Yes 50-1199 R6S 2006+ 50-0445 Yes 50-1099 GSX-R1000 2001-04 50-0240 No 50-1099 R6 2006-07 50-0449 Yes 50-1099 GSX-R1000 2005-06 50-0240 Left only 50-1099 R6 2008+ 50-0449 Yes 50-1399 GSX-R1000 2007-08 50-0249 No 50-1399 R1 2004-06 50-0425 Yes 50-1099 GSX-R1000 2009+ 50-0250 Yes 50-1399 R1 2009+ 50-0452 Yes 50-1099 Hayabusa 50-0270 Yes 50-1099 FZ1 2006+ 50-0415 No 50-1099
FZ6 2004+ 50-0413 No 50-1099 Cut OEM Repl. plastic Model Slider Base Kit bodywork? puck 675 / Street Triple / R 50-0500 Yes 50-1099
Triumph Speed Triple 2005-10 50-0510 No 50-1099 Speed Triple 2011+ 50-0511 No 50-1099
“Being in the frame alignment business,we see a lot of frame sliders that do more damage than they prevent. Woodcraft Frame Sliders are designed to protect the frame without causing unnecessary damage to the mounting points. We won’t sell any other brand.” - Peter Kates GMD Computrack Boston 20 Shark Guard
Made from tough aircraft-grade 6061T6 aluminum and finished with a clear or black anodized finish ouroodcraft W Shark Guards are a slick addition to any motorcycle.
Rivet nut mounted Inexpensive Insurance Our Shark Guards are cheap insurance against potential serious injury. In many crashes your leg has a tendency to dangle near the rear sprocket. The Shark Guard’s role is to help deflect your foot out of harm’s way. Racing Required Shark Guards are required by top racing organizations around the world including the AMA Pro Racing series and the World Superbike series. No matter if this item is required by your local club or not, we feel it’s a smart item to install. Ease of Installation Other guards ask you to drill and tap holes into your stock swingarm. The average swingarm today is only 4-6mm thick aluminum which can leave you with mounting holes that easily strip out. Only Woodcraft supplies two rivet nut inserts and an installation tool with every kit! Billet 6061-T6 Aluminum
Included Rivet Shark Guard Part Number Mounting Kit Shark Guard Kit silver 55-0100 Shark Guard Kit black 55-4100 Replacement Mounting Kit 55-9000 Joel Allen CCS #35 CCS Joel Allen 21 Tire Warmers
Tire Warmers are a critical tool for any rider that plans on riding the track. We know the last thing you want to be worrying about before pitting out is whether your tires are up to temp. We set out to build the best tire warmers on the market. The warmers are loaded with features that make tire warmer use a simple and safe experience, leaving you to focus on having fun and riding hard!
Quick Disconnect Quick-Disconnect When we were talking to our racers about warmer use we couldn’t find one person who hadn’t seen a warmer damaged when it was accidentally left plugged in. As a result,Woodcraft brings another innovation to the table with the first safety disconnect cord ever used on a warmer. Power to the warmer is cut the moment you remove it, saving you from expensive and unsafe ‘accidents’! Power Efficient Woodcraft’s engineering allows our warmers to run on only 1,000 watts (20% less than the competition) while still supplying maximum heat. When power gets low the Woodcraft warmers will get you heat when the others fail. Heat Retaining Curtains Months of testing have shown us that heat loss at the edge of the tire is the greatest factor when it comes to retaining heat from the warmer. As a result, Woodcraft has solved this problem with our elasticized insulating fleece side curtainswhich not only dramatically cut tire heat loss but also saw a 10 degree gain in rim temperature! Fleece insulating sidewalls
Dual Temp Switch
Warmer Sizes Woodcraft’s tire warmers fit a wide range of tire sizes. Our front warmer will fit widths from 100-125, and the rear warmer works on sizes from 150-200.
Dual Temp With its heavy-duty selection switch (Warm 130-140 degrees or Hot 170-180 degrees), quick-disconnect cord, fleece side curtains, and LED power light, the Dual Temp warmers gives you a lower price-point while still packing all the signa- ture Woodcraft tire warmer innovations.
Heavy Duty Recessed Hot / Warm Switch
Tire Warmers Part Number Dual Temp 30-2100 Replacement Duffle Carry Bag 31-2500
Notes- > All Tire Warmer purchases include a free Wood- ! craft duffle carrying case (see p.29) “I love my warmers... I just watched my buddy burn through another brand when he left them plugged in. Your design has saved me 2x!” - Chris Ormonde CCS #617 22 Wheel Stands Solo Operation Front Stand
All stands are the same right? Not exactly. We interviewed top mechanics and asked them what they feel are the most important features in a stand. The overwhelming responses were: low lift effort, clearance for working, and wheel design (for ease of rolling and stability). We incorporated these features into our full-range of Woodcraft Wheel Stands, all proudly built in the USA.
Low Lift Effort Tough powercoat finish A stand is your most frequently used tool. Woodcraft stands are engineered to ensure our stands lift with low physical effort without sacrificing stability or work space.
Non-slip rubber Stability skid pads Woodcraft stands provide the highest standard in the Industry for our stand wheels. The quad 4” wheels are unmatched for both stability and their ability to roll smoothly over rough surfaces. Guaranteed for Life Top quality craftsmanship allows Woodcraft to guarantee all of our stands against defects in material or workmanship. We feel that our stand is a tool that should last a lifetime and we guarantee it.
Coated fender protecting tip
Stand Part Number Coated Tip Adjustable Save that fender! Our coated stand tip keeps your front fender safe. height Front Stand 22-0100 Pin Part Number Security 13mm FS101 pin 23-0113 Another Woodcraft touch: Non-slip rubber skid pads on the bottom of our front stands makes sure the stand, and your bike, stays put. 15mm FS101 pin 23-0115 15.5mm FS101 pin 23-0115.5 Adjustability Our front stands feature and adjustable upper stanchion meaning 16.5mm FS101 pin 23-01165 you can use your front stand on anything from a RS125 to a GSX- 17mm FS101 pin 20-0117 R1000. 18mm FS101 pin 23-0118 19mm FS101 pin 23-0119 20mm FS101 pin 23-0120 21mm FS101 pin 23-0121 23mm FS101 pin 23-0123 Quad 4” wheels 24mm FS101 pin 23-0124 27mm FS101 pin 23-0127
“My 12 year old daughter has no problem putting my SV on this stand...perfect.” - Ted Temple 23 Wheel Stands Front Stand pin application chart
Aprilia Size Honda (continued) Size Suzuki Size RS250 16.5 CBR600RR 2007+ 13 GSX-R600 1997-05 13 Mille / R 27 NT647 Hawk 24 GSX-R600 2006+ 15 Falco / Tuono/V4R ‘12 27 VFR750 / 800 24 GSX-R750 1991-95 24 Tuono Factory 2007+ 19 CBR900RR 1993-97 24 GSX-R750 1996-05 13 Factory / R/ RSV$ Factory 19 CBR900RR 1998-99 13 GSX-R750 2006+ 15 RSVR/APRC 27 CBR929 / 954 13 GSX-R1000 2001-02 13 Attack Clamps 20 RC51 to 2001 13 GSX-R1000 2003-04 17 BMW RC51 2002+ 27 GSX-R1000 2005+ 13 S1000RR 15.5 CBR1000RR to 2007 13 GSX-R1100 24 K5 / K100 21 CBR1000RR 2008+ 23 RF600 / 900 24 Buell ST1100 21 SV650 / S 1999-02 21 Blast / Cyclone 18 CBR1100XX 24 SV650 / S 2003+ 16.5 S1 / S2 / Lightning 18 Kawasaki V-Strom 17 XB9 / XB12 18 EX250 to 2007 19 TL1000S / R* 13 1125R 18 EX250 2008+ 18 Hayabusa* 13 Ducati EX500 1987-93 19 SV1000 / S 2003 13 620 - 1000SS 17 EX500 1994+ 20 SV1000 / S 2004+ 20 Monster 696 27 ZX6E 1993+ 21 Triumph Hypermotard 27 ZX6R 1995-02 13 Speed Triple / T509 / 595 19 Monster to 2002 17 ZX6RR / RR 2003+ 15 Daytona 955i 19 Monster 2003+ 27 Ninja 650R 27 TT600 / 675 Daytona 13 Multistrada to 2009 24 ZX7R 1991+ 27 Yamaha 748 / 749 Base model 27 ZX9R 1994-97 27 TZ125 15 749R 13 ZX9R 1998+ 15 TZ250 13 748S/749S/916/996/998/999 N/A Z1000 27 RZ350 / 500 19 848 27 ZX10R 2004-07 15 FZR400 / 600 / 1000 21 1098 / 1198 N/A ZX10R 2008-10 27 Seca II 19 Honda ZX10R 2011 15 R6S 2006-07 21 RS125 to 1994 15 ZRX1100 17 R6 2001+ 16.5 RS125 1995+ 13 ZX11 to 1992 20 YZF600 to 1996 19 RS250 24 ZX11 1993+ 27 YZF600 1997-00 21 CB1 24 ZX12 to 2001 13 YZF600 2001+ 16.5 CBR250R 21 ZX12 2002+ 17 YZF750 20 CBR600 F1/F2/F3 24 Suzuki R1 16.5 CBR600 F4/F4I 24 GS500 24 FZ1 19 CBR600RR 2003-06 20 GSX-R600 1994-96 24 FJ1200 19 * = requires front fairing removal for stand use Reminder- > Don’t forget our front stand pins are quick and easy to remove. Have multiple bikes? Get multiple quick change lift ! pins to use with your Woodcraft Front Stand! “I have been using the same rear stand for over 10 years now! It just won’t give up!” - James A. Milroy Jr. 24 Wheel Stands Rear Stands
Woodcraft Wheel Stands are one of the most widely used stands in the industry. Take a look around the pits at an AMA event or your local club race and chances are that many of the bikes are supported by a Woodcraft Race Stand. We are also proud to say that all our stands are proudly built in the USA.
Work Clearance Mechanics appreciate both the easy lift effort and ample working clearance behind the stand - workseat clearance is excellent behind the rear wheel! Tough powdercoat finish XL Wheels Woodcraft’s trademark extra large quad 4” wheels are extremely stable and facilitate both lifting the bike on rough surfaces and rolling the bike around the shop! Powdercoat Finish Woodcraft stands have one of the toughest, most expensive powder coat finishes available today.
Quad 4” wheels Stainless steel skids on bottom
1” steel pivots Race Stand Our Race Stand (pictured above) is for use with bikes equipped with swingarm spools (page 22) and features a wide-mouth deep-V receiver that is easy to line up and secure upon lifting. Designed at 14” on center it fits most bikes. It is easily adjustable if it is necessary to be slightly wider or narrower. Simply place the stand on it’s side and adjust. The position will hold. Pad Stand For bikes that aren’t equipped with swingarm spools we offer up our Pad Stand. Outfitted with 1” diameter solid steel lift pivots that roll easily and won’t bend or break like other stands. Our pivots have super tacky rubber pads to prevent slippage and Teflon-coated bushing to keep the stand operating smoothly. The Pad Stand is fully-adjustable from 11-14”.
Super tacky rubber pads
Rear Stands Part Number Race Stand 25-0100 Pad Stand 25-0200 Walt Seigl Motorcycles Walt We do customer service! Have a question? Give us a ring 978-297-2977 25 Wheel Stands Small Parts - Big Difference Swingarm Spools Sometimes it’s the little things that make all the difference. Woodcraft Swingarm Spools have wide grooves that make locating the stand easier and raised lips on either side that give them unparalleled stability. Race Protection For racing applications the Woodcraft Delrin Swingarm Slider is our Aluminum Swingarm Spools Part Number spool of choice. The thick plastic offers extra protection in the case of a crash and incorporates the secure raised edges that our spools are 6mm Titanium 27-0600 known for. 6mm Black 27-0600B 6mm Blue 27-0600C Street Finish 6mm Red 27-0600R Our Swingarm Spools also are available in a anodized 8mm Titanium 27-0800 aluminum finish for that factory-look. Four color choices to create a unique look for your bike. 8mm Black 27-0800B 8mm Blue 27-0800C Delrin Swingarm Slider Part Number 6mm 27-3600 8mm 27-3800 Hard anodized aluminum 8mm w/ 2 offset 27-3801 10mm 27-3100 Raised lips 10mm w/ 1 offset 27-3110 10mm w/ 2 offset 27-3120 Wide grooves
Extra-protective Delrin Spools Common Spool Applications Size (mm) Common Spool Applications Size (mm) Aprilia RS250 6mm Kawasaki ZX10R 2004-05 10mm w/1 offset Aprilia Mille 10mm w/2 offset Kawasaki ZX10R 2006-10 10mm w/2 offset Aprilia Tuono/RSV4 6mm Kawasaki ZX10R 2011 8mm BMW S1000RR (need spacer both sides) 8mm* Kawasaki ZRX1100/1200 10mm w/2 offset Honda CBR600RR 2003-06 8mm Kawasaki Z1000 10mm Honda CBR600RR 2007+ 8mm* KTM 990 SuperDuke 10mm Honda CBR929/954/1000RR 8mm KTM RC8 8mm Honda RC51 8mm KTM 690 Duke 10mm Kawasaki EX250 2008+ 10mm Suzuki - All Modern Models 8mm Kawasaki EX650R 2006+ 10mm w/1 offset Suzuki B-King 8mm* Kawasaki ZX6R/636 1998-04 10mm w/1 offset Tri Daytona 675 / Street Triple (to ‘10) 6mm Kawasaki ZX6R/RR 2005-06 10mm w/2 offset Tri Daytona 675 / Street Triple (11+) 8mm Kawasaki ZX6R 2009+ 10mm Yamaha FZR 10mm Kawasaki ZX6R 2007-08 10mm w/2 offset Yamaha R1 / R6 6mm Kawasaki ZX9 1998-03 10mm Yamaha FZR 10mm * = requires spacer Part # 27-27spacer on standard spools Products for sportbikes that make sense! www.woodcraft-cfm.com 26 Armour Bodies Bodywork
When you want the best in bodywork you want Armour Bodies. In Roadracing World’s test that featured the top 9 brands of bodywork Armour Bodies finished at the front of every major category! With “exceptional fit”, finish, and offering “zero damage when flexed” you can see why Armour Bodies is a real “showstopper”.
Pro Series This bodywork put Armour Bodies on the map in the US market.
Pro Series fit, finish, flexibility and crash worthiness has made it an industry leader. This is anything but just another bodywork set. The quality is apparent as soon as you pull it out of the box.
FULL SHEET FIBERGLASS Each kit is assembled from a full sheet of fiberglass allowing for the strongest, lightest bodywork possible. Other manufacturers save money using scraps of fiberglass in their kits, making them heavier and brittle. Pro Series bodywork will often survive a crash that would leave some other bodywork in pieces.
SPECIAL RESIN Armour Bodies uses a special resin derived from the kayak industry. Originally created to withstand rocky impacts, our specially formulated resin provides superior flexibility and weight savings. This resin also has a very low shrinkage ratio, ensuring a perfect fit.
FINISH We spend more time finishing our bodywork than any other manufacturer in the industry. Every kit is meticulously finished, filling holes and sanding edges to insure a perfect surface on every kit. The bodywork is ready to paint with just a light scuff, saving you
time and money in the booth. Carbon Kevlar Reinforcement
CARBON/KEVLAR REINFORCEMENT - An Armour Bodies Exclusive Armour Bodies has raised the bar once again by adding Carbon/Kevlar reinforcements to all the mounting areas at no extra cost. These reinforcements help prevent cracking at the mount points during a crash, keeping your bodywork intact and on the bike where it belongs. Our flexibility, finish, fit and price set us apart from all others.
Built out of the best materials available
Urethane primer ready to paint
High precision molds mean great fit
“The racer’s budget means many of us do our own paintwork & fiberglass repairs... My Armour Bodies came ready to paint & sustained a lowside & multi-bike crash with minimal damage, giving me more time on the track than in the garage” - Kitt Carella LRRS #53 27 Armour Bodies #54 Roger Lee Hayden National Guard Suzuki
Armour Bodies is used by top teams throughout the world including Team Fast by Ferracci, Celtic Racing, Jordan Suzuki, National Guard Suzuki, Parkalgar Honda and many more.
Custom Seat Foam Pads Dzus Fasteners Our custom seat foam is cut for each Armour Bodies superbike tail. Each pad is made Sold in sets of six (6), these clip-style fasteners from 15mm thick, high density foam with special 3M adhesive backing to keep it securely in work great to secure upper & lower fairings, under place. All of the edges have been smoothed and beveled for a finished, factory look. drafts and many other fairing connections. Top quality genuine Dzus product. > Please call for more information > Available for all Armour Bodies SB Kits
Custom Seat Foam
03-06 Honda 07-08 Kawasaki CBR600 ZX6R
08+Yamaha 03-05 Yamaha Product Part Number R6 R6 Dzus Kit Clip Style (6pk) 71-6099 Seat Foam examples Rivet Style (6pk) 71-7099
“Unbelievably crash resistant and fitment is the easiest I’ve experienced”- Gerry Signorelli 28 Armour Bodies Full Coverage Bodywork Armour Bodies kits include: upper fairing, lower fairing, front fender, tail section (either SS or SB), and a draft shield (when applicable).
All of these pieces are available separately. (see Legend at left) Legend Part Suffix Legend Part Suffix Fender F Seat Pad Foam PAD Upper U Draft Shield D
Lower L Tank Cover TC SB Tail Fender Lower (includes seat sup- SB Tail TSB Example 71-0750F port & can use foam SS Tail TSS SS Tail seat pad) Upper (uses stock seat)
Pro Series Pro Series Replacement Replace- Replace- Replacement Model Notes SS Kit SB Kit Upper ment Lower ment Tail SS Tail SB RS250 71-0700SS ------71-0700U 71-0700L 71-0700TSS ------Special order only Aprilia RS50 71-0705SS ------71-0705U 71-0705L 71-0705TSS ------Special order only RSV4 TBA
Pro Series Pro Series Replacement Replace- Replace- Replacement Model Notes SS Kit SB Kit Upper ment Lower ment Tail SS Tail SB S1000RR 09-11 71-0750SS 71-0750SB 71-0750U 71-0750L 71-0750TSS 71-0750TSB
BMW S1000RR Stock Exhaust 71-0751SS 71-0751SB 71-0750U 71-0751L 71-0750TSS 71-0750TSB S1000RR 12+ 71-0752SS 71-0752SB 71-0750U 71-0750L ------71-0752TSB S1000RR Stock Exhaust 71-0753SS 71-0753SB 71-0750U 71-0751L ------71-0752TSB
Pro Series Pro Series Replacement Replace- Replace- Replacement Model Notes SS Kit SB Kit Upper ment Lower ment Tail SS Tail SB 748 / 996 / 998 71-0610SS ------71-0610 U 71-0610L 71-0610TSS ------
Ducati 749 / 999 71-0625SS ------71-0625U 71-0625L 71-0625TSS ------Optional Superbike Air Duct Avail. 848 / 1098 / 1198 71-0640SS 71-0640SB 71-0640U 71-0640L 71-0640TSS 71-0640TSB Suffix- BADL & BADR (left/right) 1199 Panigale 71-0645SS 71-0645SB 71-0645U 71-0645L 71-0645TSS 71-0645TSB
Pro Series Pro Series Replacement Replace- Replace- Replacement Model Notes SS Kit SB Kit Upper ment Lower ment Tail SS Tail SB CBR600 F4i 71-0332SS ------71-0332U 71-0332L 71-0332TSS ------
Honda CBR600RR 2003-04 ------71-0335SB 71-0335U 71-0335L ------71-0335TSB Includes tank cover & air inlets CBR600RR 2005-06 ------71-0336SB 71-0336U 71-0336L ------71-0336TSB Includes tank cover & air inlets CBR600RR 2007-08 71-0338SS 71-0338SB 71-0338U 71-0338L 71-0338TSS 71-0338TSB Includes tank cover CBR600RR 2009-12 71-0348SS 71-0348SB 71-0348U 71-0348L 71-0338TSS 71-0338TSB Includes tank cover CBR600RR 2013 71-0349SS 71-0349SB 71-0349U 71-0349L 71-0349TSS 71-0349TSB Includes tank cover CBR1000RR 2004-05 71-0337SS ------71-0337U 71-0337L 71-0337TSS ------Includes tank cover CBR1000RR 2008-11 71-0339SS 71-0339SB 71-0339U 71-0339L 71-0339TSS 71-0339TSB Includes tank cover CBR1000RR 2012 71-0341SS 71-0341SB 71-0341U 71-0341L 71-0339TSS 71-0339TSB Includes tank cover RC51 ------71-0340SB 71-0340U 71-0340L ------71-0340TSB Tail designed for HRC subframe
Pro Series Pro Series Replacement Replace- Replace- Replacement Model Notes SS Kit SB Kit Upper ment Lower ment Tail SS Tail SB Ninja EX250 2008+ 71-0130SS ------71-0130U 71-0130L 71-0130TSS ------ZX6RR / 636 2005-06 71-0145SS 71-0145SB 71-0145U 71-0145L 71-0140TSS 71-0140TSB ZX6RR / 636 2007-08 71-0147SS 71-0147SB 71-0147U 71-0147L 71-0147TSS 71-0147TSB Kawasaki ZX6R 2009-12 71-0149SS ------71-0149U 71-0149L 71-0149TSS ------ZX6R 2013 71-0150SS 71-0150SB 71-0150U 71-0150L 71-0150TSS 71-0150TSB ZX10R 2006-07 71-0165SS 71-0165SB 71-0165U 71-0165L 71-0165TSS 71-0165TSB ZX10R 2008-10 71-0167SS 71-0167SB 71-0167U 71-0167L 71-0167TSS 71-0167TSB ZX10R 2011+ 71-0168SS 71-0168SB 71-0168U 71-0168L 71-0168TSS 71-0168TSB 29 Kits in RED ship oversize boxes and are not eligible for flat rate shipping discounts All ofthesepiecesareavailableseparately. (seeLegendatleft) section (eitherSSorSB),andadraftshield(whenapplicable). Armour Bodieskitsinclude:upperfairing,lowerfrontfender, tail Full Coverage
Yamaha Suzuki Triumph MV Agusta Model F4 2013` SV650/S 2003+ Model Model GSX-R1000 2007-08 GSX-R750 2004-05 GSX-R600 2004-05 GSX-R1000 2009+ GSX-R1000 2005-06 GSX-R750 2011 GSX-R750 2008-10 GSX-R750 2006-07 GSX-R750 2000-03 GSX-R600 2011 GSX-R600 2008-10 GSX-R600 2006-07 GSX-R600 2001-03 675 2013 SV650/S 1999-02 675 06-12 R1 2002-03 R1 2009+ R6 2008+ R6 2006-07 R6 2003-05 Model R1 2007-08 R1 2004-06 R6 1999-02 FZR 60089-98 Pro Series Pro Series Pro Series 71-0224SS 71-0249SS 71-0242SS 71-0242SS 71-0250SS 71-0245SS 71-0258SS 71-0248SS 71-0247SS 71-0258SS 71-0248SS 71-0247SS 71-0220SS 71-0500SS Pro Series 71-0420SS 71-0452SS 71-0449SS 71-0448SS 71-0445SS 71-0428SS 71-0425SS 71-0440SS 71-0415SS ------SS Kit SS Kit SS Kit SS Kit TBA TBA Pro Series 71-0240SB 71-0240SB 71-0249SB 71-0242SB 71-0242SB 71-0250SB 71-0245SB 71-0258SB 71-0248SB 71-0247SB 71-0258SB 71-0248SB 71-0247SB Pro Series Pro Series 71-0452SB 71-0459SB 71-0448SB 71-0445SB 71-0428SB Pro Series ------SB Kit SB Kit SB Kit SB Kit TBA TBA Replacement Replacement Replacement Replacement 71-0258U 71-0258L 71-0250U 71-0249U 71-0245U 71-0248U 71-0247U 71-0242U 71-0240U 71-0248U 71-0247U 71-0242U 71-0240U 71-0224U 71-0220U 71-0500U 71-0420U 71-0449U 71-0448U 71-0445U 71-0440U 71-0415U 71-0452U 71-0428U 71-0425U Upper Upper Upper Upper TBA TBA ment Lower ment Lower ment Lower ment Lower Replace 71-0248L 71-0247L 71-0242L 71-0240L 71-0224L 71-0220L 71-0500L 71-0250L 71-0249L 71-0245L 71-0248L 71-0247L 71-0242L 71-0240L 71-0258L 71-0258L Replace Replace 71-0452L 71-0428L 71-0425L 71-0420L 71-0449L 71-0448L 71-0445L 71-0440L 71-0415L Replace TBA TBA - - - - ment TailSS ment TailSS ment TailSS ment TailSS 71h0445TSS 71-0248TSS 71-0247TSS 71-0224TSS 71-0220TSS 71-0500TSS 71-0250TSS 71-0249TSS 71-0245TSS 71-0248TSS 71-0247TSS 71-0242TSS 71-0258TSS 71-0258TSS 71-0452TSS 71-0428TSS 71-0425TSS 71-0420TSS 71-0449TSS 71-0448TSS 71-0415TSS 71-242TSS Replace Replace Replace Replace ------Armour Bodies TBA TBA - - - - Replacement Replacement 71-0258TSB 71-0258TSB 71-0248TSB 71-0247TSB 71-0242TSB 71-0240TSB 71-0250TSB 71-0249TSB 71-0245TSB 71-0248TSB 71-0247TSB 71-0242TSB 71-0240TSB Sig. Series 71-0452TSB 71-0428TSB 71-0459TSB 71-0448TSB 71-0445TSB 71-0440TSB Sig. Series ------Tail SB Tail SB Parts Parts TBA Notes UFM hardware incl. kit SB Tail &UFM hardware incl. SB Tail &UFM hardware incl. Uses 650Smodelwindscreen 4-piece mountIncludes kit Kit includessidepanels Kit SB Tail incl. mount hardware UFM hardware incl. kit SB Tail &UFNhardware incl. SB Tail &UFM hardware incl. Requires 06-08windscreen Notes Notes Can’t usestock windscreen brackets necessary Includes Includes tailmount spacerIncludes tankcoverIncludes Notes Bodywork
#23 Ben Bostrom Jordan Suzuki 30 Axle Sliders
Hexed slider The 5 Second Slider base acts as a Our new line of axle sliders features a Quick Realese that adds no axle removal more than 5 seconds to a wheel change. They are designed so tool. that only 1 puck needs to come off to remove the axle. Simply pull
the pin and the puck comes right off. If you ever need to change a Solid slider puck after a fall, it’s the fastest repair you’ll ever make! top
Protection Axle sliders help to protect valuable components like fork lowers and swingarms in the case of a crash. The patent pending puck design is made from the same high grade plastic as our frame sliders and offers better protection than hollow sliders. Combine with Woodcraft rearsets, engine covers and frame sliders for ultimate crash protection.
Quick release pin for fast Style slider removal Not only do Woodcraft axle sliders provide great protection they also are a great looking upgrade to any motorcycle. These sliders add style and protection that will help set your motorcycle apart from the crowd.
Make & Model Front Axle Kit Rear Axle Kit Make & Model Front Axle Kit Rear Axle Kit Aprilia RSV4 TBA TBA Suzuki GSX-R600 2006-07 45-1248F TBA BMW S1000RR 45-1750F 45-1750R Suzuki GSX-R750 2006-07 45-1248F TBA Ducati 848/1098/1198 45-1640F ------Suzuki GSX-R600 2008-10 45-1248F 45-1248R Ducati Panigale 45-1640F ------Suzuki GSX-R750 2008-10 45-1248F 45-1248R Ducati Diavel 45-1640F ------Suzuki GSX-R600 2011+ 45-1258F 45-1258R Ducati Streetfighter/Hypermotard 45-1640F ------Suzuki GSX-R750 2011+ 45-1258F 45-1258R Honda CBR600 F4/F4i 45-1330F 45-1330R Suzuki GSX-R1000 2005-08 45-1248F 45-1249R Honda CBR600RR 2007-12 45-1338F 45-1338R Suzuki GSX-R1000 2009-11 45-1248F TBA Honda CBR600RR 2013 TBA TBA Suzuki GSX-R1000 2012+ TBA TBA Honda CBR1000RR 2008+ 45-1337F 45-1337R Yamaha R6 2003-05 45-1449F 45-1449R Kawasaki ZX6R 2007+ 45-1149F 45-1149R Yamaha R6 2006+ 45-1449F 45-1449R Kawasaki ZX10R 06-07 TBA 45-1168R Yamaha R1 2004-2006 45-1449F 45-1449R Kawasaki ZX10R 08-10 45-1149F 45-1168R Yamaha R1 2007+ 45-1449F 45-1452R Kawasaki ZX10R 11+ 45-1149F 45-1169R Triumph 675 45-1500F 45-1500R
More Models Coming- > This is just a partial listing of bikes and kits available that will be available. We will be offering more applications ! throughout the 2013 season. If your bike isn’t listed please call and we’ll be happy to assist you: 978-297-2977 Products for sportbikes that make sense! www.woodcraft-cfm.com 31 Klucky Pucks
The staff at Woodcraft has been racing for a long time and have always felt that “Klucky Pucks” were the best in the business. We thought that this product line would be the perfect addition to the Woodcraft family and when the opportunity arose to add Klucky Pucks to our company we jumped at the chance!
Ranked #1 In recent years Roadracing World magazine did a comprehensive comparison of all the knee sliders on the market and Klucky Pucks came out Number 1. Durability Pucks need to last; plain and simple! Klucky Pucks are constructed with a compound developed through years of experience, resulting is a puck that last longer than the competition while maintaining the feel that racers need. Security If your kneepucks get knocked off while on the track you’re in for a long day, and some leather repair. Klucky Pucks have the
Jake Vader Jake toughest velcro on the market, bar none!
Color Part Number A Top Seller! Black 95-0100 Blue 95-0200 Rain/ Endurance Pucks Yellow 95-0300 Our new rain pucks are double the thickness Red 95-0400 to provide greater feel in wet condtions. Made out White 95-0500 of our trademark plastic compound these pucks are designed to last. Black Rain Puck 95-0101
(Our rain puck vs. standard puck.)
What do the Pro’s say? “Your pucks are the very best I’ve come across..” - Chris Carr
“Your sliders last longer & slide smoother...without grabbing the pave- ment when I plant my knee” - Steve Crevier
“These pucks last longer and stay on better than any puck I’ve ever tried” - Jeff Wood
“19 pucks tested, Overall comparison test winner” - Chris Ulrich Christian Smutnick #316 Christian Smutnick
“After a whole year of abuse I’ve yet to replace my Klucky Pucks..& I got them used!”- Pete Gaboriault LRRS #187 32 Ceramic Bearings Wheel & Engine Kits
How do you get that Factory-Race bike advantage? One of the secrets is ceramic bearings that are used in nearly every AMA Superbike, World Superbike, MotoGP, and Professional Drag Race motor around the world! Less weight, less friction and less surface wear equals more horsepower in your motor, simple as that.
Reduced Rotating Mass The ceramic balls in these hybrid bearings are over 60% lighter than their steel counterparts resulting in faster acceleration and reduced inertial loads. Low Friction - Less Vibration The coefficient of friction for the ceramic balls is an average of 3x’s lower than steel. When you combine this with the high tolerances for roundness you get a bearing that has dramatically lowers vibration levels and produces more horsepower. Preservation Due to the unique properties of the ceramic balls these bearings have vastly reduced surface wear when compared to steel balls. The reduction in wear eliminates a large portion of the oil contaminates, thus prolonging lubricant life.
Make & Model Engine Kit Wheel Kit Make & Model Engine Kit Wheel Kit Honda CBR600RR 2003-06 20-0335E 20-0335W Suzuki GSX-R600 2006+ 20-0247E 20-0247W Honda CBR600RR 2007+ 20-0338E 20-0338W Suzuki GSX-R750 2000-05 20-0240E 20-0240W Honda CBR1000RR 2004-2007 20-0337E 20-0337W Suzuki GSX-R750 2006+ 20-0247E 20-0247W Honda CBR1000RR 2008+ 20-0339E 20-0339W Suzuki GSX-R1000 2005-06 20-0245E 20-0245W Kawasaki ZX6R / 636 2005-06 20-0145E 20-0145W Suzuki GSX-R1000 2007-08 20-0249E 20-0249W Kawasaki ZX6R 2007-08 20-0147E 20-0147W Suzuki GSX-R1000 2009+ 20-0250E 20-0250W Kawasaki ZX6R 2009+ 20-0149E 20-0149W Yamaha R6 2003-05 20-0445E 20-0445W Kawasaki ZX10R 2004-05 20-0160E 20-0160W Yamaha R6 2006+ 20-0449E 20-0449W Kawasaki ZX10R 2006+ 20-0165E 20-0165W Yamaha R1 2004-2006 20-0425E 20-0425W Suzuki SV650 / S 1999-02 20-0220E 20-0220W Yamaha R1 2007-08 20-0428E 20-0428W Suzuki SV650 / S 2003+ 20-0224E 20-0224W Yamaha R1 2009+ 20-0452E 20-0452W Suzuki GSX-R600 2001-05 20-0240E 20-0240W
Note- > This is just a partial listing of bikes and kits available. We offer Engine and Wheel kits for most makes and brands. If your bike isn’t listed please call and we’ll be ! happy to assist you: 978-297-2977 Real World Results How do our Ceramic Bearing Kits perform in the Real World? To find out we compared results in a 2005 Yamaha R6 drag bike before and after with our Engine and Wheel kits installed. Post-installation the R6 ran a average .15 seconds quicker and had gained 2-3mph through the trap!
Products for sportbikes that make sense! www.woodcraft-cfm.com 33 Apparel & Accessories Heading out for a Bike Night or need something to keep you warm for those chilly paddock nights? Woodcraft offers up some options to keep you looking good both on and off the bike.
Woodcraft “W-Hoodie” embroidered Woodcraft “Make Sense” tshirt heavyweight sweatshirt Woodcraft “Make Sense” tshirt (back)
T-Shirt Part Number Hoodie Part Number Decals Part Number Other Part Number Small 99-0100S Small 99-0200S 5.25” x 1.375” 99-0525/0625 Beanie 99-0300 5.25” x 1.375” Medium 99-0100M Medium 99-0200M 99-0625 Duffel Bag 31-2500 “Made in USA” Large 99-0100L Large 99-0200L 10.625” x 2.813” 99-010625 Banner 12”x60” 99-BANNER Xtra-Large 99-0100XL Xtra-Large 99-0200XL 14.375” x 3.875” 99-014375 Patch 99-PATCH Double XL 99-0100XXL Double-XL 99-0200XXL Armour Bodies 99-0725
99-0525
Woodcraft Duffel Bag 16” x 10” x 12”
99-0625 Armour Bodies decal Woodcraft Pit Banner Detail 2.75” x 3.50” 60” x 12” Woodcraft embroidered beanie
Top Bottom Woodcraft decal Woodcraft patch 5.25” x 1.375” 5.375” x 1.5” 10.625” x 2.813” Black Blue Olive Plum 14.375” x 3.875” 99-0300 99-0301 99-0302 99-0303 Thank you for choosing Woodcraft. Keep the rubber side down! 34 Sportbike Products that Make Sense!!
Terms & Conditions Bodywork Tire Ordering Warmers Phone: 978-297-2977 Monday - Friday 9:00am to 5:00pm EST Fax: 24 hours at 978-297-2922 Online: 24 hours at http://www.woodcraft-cfm.com (both Dealer and Retail accounts available)
Payment Terms All orders will be shipped prepaid unless other Front arrangements have been made. Personal checks are Axle not accepted. Credit card orders must be shipped to the Sliders billing address of the credit card. Lever Returns Guards No item will be accepted without prior approval. All Clipons returns must be authorized within fifteen (15) days of receipt of order. All returns must be accompanied with a return authorization (RA) number and must be in new and unused condition. All returns are subject to Frame a restocking fee of 20%. Returns must have a clearly Sliders marked RA number and customer name on the outside of the box. No returns will be accepted on close-out or special order items.
Cover Engine Liability Protectors The items in this catalog are intended for racing use Covers and may render some vehicles illegal for street riding in some States. The purchaser is responsible for familiarity with the local and national laws pertaining to the use of any Woodcraft products. The purchaser of any part releases the manufacturer of those parts and Woodcraft from all liabilities pertaining to the use of the parts. The purchaser recognizes that any modifications to any motorcycle can increase the risk of an accident and/or Rearsets injury and may also render the motorcycle illegal for use on public roads. Installation of all Woodcraft products should be performed by trained professionals. Swingarm Warning Shark Spools Guard Installation and use of some Woodcraft Technologies, Inc. products will change the response of the motorcycle Rear to rider control inputs. Failure of the rider to adapt to Axle these changes may cause loss of control and serious Sliders injury or death. Improper installation and/or failure to comply with all warning and instructions may cause a loss of control and serious injury or death. Do not install Stands or use any Woodcraft Technologies, Inc. product if you are unable to do so in compliance of all Seat instructions and warnings. Seek the assistance of a Pads trained professional technician.
Phone: 978-297-2977 Fax: 978-297-2922 105 Baldwinville Rd www.woodcraft-cfm.com Winchendon, MA 01475 [email protected]