Echopod® DX10 Ultrasonic Level Sensor

Liquid Gold Introduction

Market Overview

Global demand for specialty chemicals has risen to $451B a year and Liquid Gold pervades every sector of our modern economy. Can you name an industry that has no reliance or association with chemicals in the manufacturing or delivery of their products or services? Chemical prices have steadily ascended due to rising oil, energy and transportation costs; increased global demand from emerging countries; and supply shortages caused by manufacturing relocation to low- cocost producer countries. The landscape has and will continue to change for the foreseeable future. Chemical distributors, industrialin manufacturers and municipalities have entered a new era where rising costs and margin compression are ininevitable without equivalent gains in productivity. Now more than ever, level measurement and control solutions play a key rorole in the cost-effective delivery, inventory and use of Liquid Gold.

ChemicalC LifeLife SciencSciencee WWaterater EnergyEnergy WWastewaterastewater Food & BeverageBeverage

1 www.flowline.com Email UsFax: | [email protected] 1 We Do Your Level Best We Do Your Level Best Introduction TM About Flowline

We Do Your Level Best™

A globally recognized and respected supplier of industrial instrumentation, Flowline designs, manufacturers and markets level measurement and control solutions for chemical, water and wastewater applications. We enable industrial manufacturers and municipalities to safely and efficiently manage their contained liquid assets. Our quality solutions automate tank processes, protect the environment and ensure workplace safety. Flowline products are sold and supported worldwide through our stocking distribution partners. Customers include design engineers, system integrators, original equipment manufacturers, facility management and maintenance decision makers. The leading criteria for product selection are reliability, performance and ease of use. We do your level best through our commitment to customer satisfaction and continuous improvement.

Technology

Flowline’s core technology is non-contact ultrasonic level measurement. This highly reliable technology is ideal for a wide range of liquid applications including chemical, oil, water and wastewater. The sensor emits multiple high frequency sound pulses per second from the base of the transducer. Each pulse travels through the air gap, reflects off the liquid surface and returns to the transducer where its received. The temperature compensated sensor calculates the time interval from pulse transmission to receipt, and translates this into distance based upon the speed of sound. Packaged in advanced thermoplastics for corrosive applications, Flowline ultrasonic sensors require little or no maintenance, and provide better performance than contact devices which generally suffer from prolonged liquid contact.

Chemical Water Wastewater

2 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Flowline Advantage Introduction

Quality Commitment

We strive to provide our customers with products and services that meet your requirements and exceed your expectations. We do your level best by listening, learning and acting to pursue continuous improvement throughout our business practices with the following commitments:

• Company commitment to deliver customer satisfaction

• Action culture founded in meeting customer requirements

• Empowerment to provide great products and service on time

• Measurement driven to deliver continuous improvement

Digital Signal Processing

Flowline ultrasonic level sensors feature our patented digital signal processing technology that delivers the Flowline advantage, accurate and reliable, non-contact measurement of chemical, oil, water and wastewater from 0.25m-10m. This adaptive technology creates a living map of your tank process and continuously optimizes sensor power, obstacle recognition, signal output filtering, environmental noise rejection and fail-safe diagnostics. The Flowline DSP advantage delivers the following application benefits:

• Robust non-contact level measurement from 0.25m-10m

• 0.2% accuracy with little or no degradation over the range

• Auto-adaptive signal output filtering smooths liquid agitation

• Narrow 2” beam width for installation near walls or obstacles

• Tight 2” dead band optimizes the filling capacity of small tanks

Accuracy Obstacles

Dead band Vapor

Beam width Agitation

3 www.flowline.com Email UsFax: | [email protected] 3 We Do Your Level Best We Do Your Level Best Introduction TM Table of Contents

Introduction

Liquid Gold ...... 1 About Flowline...... 2 Flowline Advantage ...... 3 Table of Contents ...... 4 - 5 Level Automation Map ...... 6 - 7 New Level Solutions ...... 8 - 9 Level Application Selection Guide ...... 10 - 11

Small Tank Level Measurement & Control

Introduction to Small Tank Level Solutions ...... 12 - 13 EchoPod® DL14 Multi-Function Ultrasonic Level Transmitter ...... 14 EchoPod® DL24 Multi-Function Ultrasonic Level Transmitter ...... 15 EchoPod® DL34 Multi-Function Ultrasonic Level Transmitter ...... 16 EchoPod® DS14 Ultrasonic Level Switch & Controller ...... 17 EchoPod® DL10 Ultrasonic Level Transmitter ...... 18 EchoPod® DX10 Ultrasonic Level Sensor ...... 19

WebCal™ Configuration Software

Introduction to WebCal™ Software...... 20 - 21

Bulk Tank Level Measurement & Control

Introduction to Bulk Tank Level Solutions ...... 22 - 23 EchoTouch™ LU20 IS Ultrasonic Level Transmitter ...... 24 - 25 EchoSafe® XP8X XP Ultrasonic Level Transmitter ...... 26 - 27 DeltaSpan™ LD31 IS Pressure Level Transmitter ...... 28 DeltaSpan™ LD32 IS Pressure Level Transmitter ...... 29 FluidWell™ 300400 XP Level Indicator...... 30 DataLoop™ LI25 IS Level Indicator ...... 31 EchoSonic® II LU2X Ultrasonic Level Transmitter with Cable ...... 32 - 33 EchoSonic® II LU2X Ultrasonic Level Transmitter with Conduit ...... 34 - 35 EchoSpan® LU8X Ultrasonic Level Transmitter ...... 36 - 37 DeltaSpan™ LD30 External Pressure Level Transmitter ...... 38 DeltaSpan™ LD31-32 Submersible Pressure Level Transmitter...... 39 EchoTouch™ LU30 3-Wire Ultrasonic Level Transmitter ...... 40 FloaTek™ LV55 Float Level Transmitter ...... 41 DataLoop™ LI25 Level Indicator...... 42 DataView™ LI55 Level Controller ...... 43 Commander™ LI90 Multi-Tank Level Controller ...... 44 DataPoint™ LC52 Level Controller...... 45

4 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Table of Contents Introduction

Level Detection, Switching & Control

Introduction to Level Switch Solutions...... 46 - 47 EchoSwitch® II LU7X Ultrasonic Level Switch & Controller ...... 48 - 49 Smart Trak™ AX23 with Compact Level Controller ...... 50 - 51 Smart Trak™ AXXX with Compact Junction Box ...... 52 - 53 Float-Point™ AVX6 with Compact Junction Box ...... 54 - 55 Switch-Pak™ AX13 with Compact Level Controller ...... 56 - 57 Switch-Pak™ AX1X with Compact Junction Box ...... 58 - 59 Switch-Pro™ AX13 with Compact Level Controller...... 60 Switch-Pro™ AX18 with Compact Junction Box ...... 61 Float-Point™ AV17 55-Gallon Drum Alarm ...... 62 Switch-Tek™ LU10 Ultrasonic Level Switch ...... 63 Switch-Tek™ LZ12 Vibration Level Switch ...... 64 Switch-Tek™ LV10 Vertical Buoyancy Level Switch ...... 65 Switch-Tek™ LO10 Optic Leak Detection Switch ...... 66 Switch-Tek™ LP15 Guard Capacitance Level Switch ...... 67 Switch-Tek™ LP50 Non-Intrusive Capacitance Level Switch...... 68 Switch-Tek™ LV20/LH25 Mini-Float Level Switch ...... 69 Switch-Tek™ LV3X/LH35 High-Temp Float Level Switch ...... 70 Switch-Tek™ LH29 Interstitial Leak Detection Switch...... 71 Strobe Alert™ LC09-10 Compact Flash Alarm ...... 72 Switch-Pro™ LCXX Remote Level Controller...... 73 Switch-Pro™ LC1X Compact Level Controller ...... 74 Switch-Pro™ LC0X Compact Junction Box ...... 75

Flow Detection, Switching & Control

Introduction to Flow Switch Solutions ...... 76 Thermo-Flo™ FT10/GT10 Liquid & Gas Flow Switch ...... 77 Thermo-Flo™ AX1X with Compact Flow Controller ...... 78 Thermo-Flo™ AX1X with Compact Junction Box ...... 79 Thermo-Flo™ LC30 Compact Flow Controller ...... 80 Thermo-Flo™ LCXX Remote Flow Controller...... 81

Installation Fittings

Smart Trak™ Installation Fitting ...... 82 Switch-Pak™ Installation Fitting ...... 83 Parts & Accessories ...... 84

Reference Part Number by Page & Price Index ...... 85-95

5 www.flowline.com Email UsFax: | [email protected] 5 We Do Your Level Best We Do Your Level Best Introduction TM Level Automation Map

3 4 1. Tote Inventory Monitoring EchoSonic II LU27 | Pages 32-35 2. Tote High Level Alarm EchoPod DS14 | Page 17 3. Bulk Inventory Monitoring EchoTouch LU20 | Pages 24-25 4. Bulk Overflow Protection Switch-Pak AU13 | Pages 56-57 5. Containment Leak Detection Optic LO10 | Page 66 5 6. Pump Run Dry Protection 2 Thermo-Flo AT12 | Page 82 7. Bulk Overflow Protection Switch-Pak AV13 | Pages 56-57 8. Bulk Inventory Monitoring 1 EchoSonic II LU29 | Pages 32-35 9. Containment Leak Detection Optic LO10 | Page 66 6 10. Day Tank Automatic Fill Smart Trak AV23 | Pages 50-51 11. Tote Inventory Monitoring EchoPod DL10 | Page 18 12. Process Automatic Fill Smart Trak AU23 | Pages 50-51 13. Process High & Low Alarm Capacitance LP50 | Page 68 14. Process Level Monitoring EchoPod DL14 | Page 14 15. Process High & Low Alarm Vibration LZ12 | Page 64 16. Process Automatic Fill EchoPod DS14 | Page 17 Chemical 17. Drum Inventory Monitoring EchoPod DL10 | Page 18 Distribution 18. Drum Low Level Alarm Switch-Pak AU13 | Pages 56-57 19. Sump Automatic Empty Smart Trak AZ23 | Pages 50-51 Municipal 20. Pump Station Monitoring EchoPod DL24 | Page 15 29 Wastewater 21. Pump Station High Alarm Switch-Pak AU13 | Pages 56-57 22. Bulk Inventory Monitoring EchoSonic II LU28 | Pages 32-35 23. Bulk Overflow Protection Switch-Pak AZ13 | Pages 56-57 24. Containment Leak Detection Optic LO10 | Page 66 25. Pump Run Dry Protection 30 Thermo-Flo AT12 | Page 82 31 26. Tote Inventory Monitoring 36 EchoSonic II LU27 | Pages 32-35 27. Drum Inventory Monitoring EchoPod DX10 | Page 19 28. Waste Treatment Monitoring EchoSpan LU83 | Pages 36-37 29. Day Tank Monitoring EchoSpan LU80 | Pages 36-37 30. Pump Station Monitoring 32 EchoTouch LU20 | Pages 24-25 34 35 31. Pump Station High Alarm Switch-Pak AZ13 | Pages 56-57 32. Channel Flow Measurement EchoPod DL10 | Page 18 33 33. Drum Low Level Alarm EchoPod DS14 | Page 17 34. Pump Station Monitoring EchoSafe XP88 | Pages 26-27 35. Pump Station High Alarm Switch-Pak AU13 | Pages 56-57 36. Channel Flow Measurement EchoPod DX10 | Page 19

66 www.flowline.com Call Usus at | 562.598.3015 We Do Your Level Best Chemical, Water & Wastewater Introduction

7 8 10 11

14 9

16 13

15 19 17

Industrial Manufacturing

22 Industrial 23 Wastewater

20 21 24

25 26

7 www.flowline.com EmailEmail usUsFax: at | [email protected]@flowline.com 7 We Do Your Level Best We Do Your Level Best Introduction TM New Level Solutions

EchoPod | DL24 & DL34 | Pages 15 - 16

Expanded EchoPod Measurement Ranges The typical level application requires the newly extended measurement ranges up ability to determine liquid level, control to 5.5m (18.0’). The EchoPod DL24 and a tank filling or emptying operation and DL34 feature a two-wire, 4-20 mA signal signal an alarm condition. Most level output with (4) SPST relays that can be products are single function with any configured on a single set point alarm or additional features provided through latched on two set points for automatic fill external devices. EchoPod provides all or empty control functions with selectable three functions in a single product with hysteresis and fail-safe logic.

EchoPod | DS14, DL10 & DX10 | Pages 17 - 19

Expanded EchoPod Signal Outputs Having the right sensor output is just with PLC discreet inputs or external ice as important as the right measurement cube relays utilizing the integral control technology and price. Flowline has functions. The DX10 has a selectable released three new variations of EchoPod voltage or frequency output. Select the with four different outputs to meet your 0-5 or 0-10 voltage output for use with speciﬁc application requirements. The PLC analog inputs. Select the 976-2k DL10 series has a two-wire, 4-20 mA Hz. frequency output for use with a PLC signal for use with PLC analog inputs. The discreet input, which saves the additional DS14 has (4) SPST relay outputs for use cost of an analog input card.

DeltaSpan IS | LD31-IS & LD32-IS | Pages 28 - 29

Intrinsically Safe Level Measurement Pressure transmitters are the ideal sensors are perfect for municipal storm compliment to ultrasonic transmitters water, wastewater and water treatment because they’re unaffected by surface applications that require intrinsic safety foam or vapor above the liquid level. due to the presence of hazardous The new DeltaSpan transmitters are methane gas. The LD31 series is used in intrinsically safe for use in Class I, clean water and diluted chemicals. The Div 1, Groups A, B, C and D; Class II, LD32 series is used in pump lift stations Div 1, Groups E, F and G and Class and clariﬁers with more challenging dirty, III environments. These submersible coating or scaling liquids.

8 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best New Level Solutions Introduction

Switch-Tek | LH29 | Page 71

Leak Detection Switching Requirements for leak detection have hard to reach interstitial space of second- grown steadily due to increased envi- ary containment tanks or sumps. In the ronmental regulations, the rising cost event of a leak, the non-powered ﬂoat of insurance and associated liability. To switch will signal an alarm condition. maximize safety and minimize cost, the Check with your insurance company to early detection of leaks is critical. The see if you qualify for a premium reduc- new LH29 series ﬂoat leak detection tion through the use of secondary con- switch is designed for placement in the tainment leak detection switches.

Float-Point | AV17 | Page 62

55-Gallon Drum Alarming 55-gallon drums are the mainstay of portable, battery powered solution. In the small tank chemical transportation and event of an alarm condition, the battery storage with millions of drums in service powered LED will actuate to indicate the worldwide. Once empty, used drums are problem. Alarm enclosures are available replaced with full drums. While ﬂexible, in both compact and remote mount types this rotation creates special challenges for optimal user placement. The drum when attempting to monitor drum levels alarm is offered in high, low or high and using traditional line powered sensors. low conﬁgurations. The Float-Point 55-gallon drum alarm is a

EchoSonic II | LU23, LU27, LU28 & LU29 | Pages 34 - 35

General Purpose Level Measurement Most general purpose level transmit- EchoSonic II has since become a best ters are cost burdened with push button seller. Now we’re offering the same display hardware that’s used once dur- great product in a water tight, NEMA ing conﬁguration. To eliminate this cost, 4X enclosure with conduit interface. Ad- six years ago Flowline introduced the ditionally, we’ve added a 5.5m (18.0’) EchoSonic II ultrasonic level transmitter measurement range because you asked that’s PC conﬁgured via our free Web- for it. Your favorite ultrasonic level trans- Cal software. Offered in a submersible, mitter just got better. Type 6P enclosure with cable interface,

Email Us | [email protected] 9 We Do Your Level Best Introduction LevelTM Application Selection Guide

Application Matrix

Continuous Point

Industrial Measurement Indication / Control Hi / Low Alarm

Bulk storage X X Day tank X X IBC & drum X X Process vessel X Waste sump X X Wastewater treatment X X

Automation Machine, Tool & Skid Measurement Indication / Control Hi / Low Alarm

Dispensing X X Plating X X Mixing X X Printing X X X Washers X X Semi-conductor X X Wet bench X X Life science X X Water remediation X X Process make-up water X X Wastewater neutralization X X Pharmaceutical process X X X Dialysis X X X Bio-waste X X X Disinfecting X XX Commercial laundry X X Commercial fountains X X HVAC chemical feed X X Boiler chemical feed X X

Process Control Measurement Indication / Control Hi / Low Alarm

Wastewater treatment X X Power generation X X Energy X X Gas & oil X X X Mining X X X Marine X X Food & beverage X X Commercial pools X X Water parks X X Paints & coatings X X Parts cleaners X Municipalities X X Deionized water X X Cosmetics X X Agriculture X X

10 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Measurement, Indication, Control & Alarm Introduction

DataView™ LI55 DataLoop™ LI25 Commander™ LI90 FluidWell™ 300400

Sensor Only Page 43 Pages 31, 42 Page 44 Page 30

EchoPod® DL24

Page 15

EchoPod® DL14

Page 14

EchoPod® DS14 Page 17

EchoPod® DL10

Page 18

EchoPod® DX10 Page 19

EchoSonic® II LU2X

Pages 32-35

EchoSpan® LU8X

Pages 36-37

EchoSwitch® II LU7X

Pages 48-49

EchoTouch™ LU20/30

Pages 24-25, 40

EchoSafe® XP88/89

Pages 26-27

Email Us | [email protected] 11 We Do Your Level Best Small Tank IntroductionTM to Small Tank Level Solutions

Small Tank Problem

Float and conductance level switches often fail due to prolonged contact with corrosive, sticky or dirty liquids requiring expensive maintenance.

Floats Stick

Rods Corrode

Small Tank Solution

The reliable non-contact EchoPod replaces float and conductance level switches that fail due to prolonged contact with corrosive, sticky or dirty liquids in small tank chemical feed, skid or process applications. The compact sensor puts multi-point level switch, control and measurement functions in the palm of your hand.

Applications

High and Low Alarms • High-level spill prevention Markets • Pump or heater protection • Chemical feed • Low-level inventory control • Metal ﬁnishing • HVAC Automatic Fill or Empty • Semi-conductor • Pump lift stations • Water treatment • Chemical day tanks • Skid or process vessels • Food & beverage • Commercial laundry Level Measurement • Paint & coatings • Inventory control • Lubricants • Process monitoring • Car & truck wash

12 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Measurement, Switching & Control Small Tank

EchoPod® Ultrasonic Level Sensors

EchoPod is an innovative level sensor family that replaces ﬂoat, conductance and pressure sensors that fail due to contact with dirty, sticking and scaling media in small (≤ 49.2”) to medium (≤ 216.5”) capacity tanks. Applied in skid, machine, tool and process applications, the general purpose sensors are available with single and multi-function capabilities including measurement, switching and control.

Measurement outputs include current, voltage and frequency. Up to four relays can be configured on a single set point alarm or latched on two set points for automatic fill or empty functions using the embedded level controller. PC configuration is simple with our free WebCal software.

This year, Flowline is proud to introduce a new member to the EchoPod family. The DL34 ultrasonic level transmitter, switch and controller provides multi-function level solutions for larger capacity tanks. With continuous level measurement up to 18.0’ and four programmable relays, it’s our smallest and most powerful transmitter yet. Select the DL34 for bulk storage and day tank applications that require integral level measurement and control. Big transmitters now come in small packages.

General Purpose Measurement, Switching & Control

Measurement, Switching & Control Switching Measurement

DL34 DL24 DL14 DS14 DL10 DX10 Page 16 Page 15 Page 14Page 17 Page 18 Page 19

DL34 DL24 DL14 DS14 DL10 DX10 Type Ultrasonic Class GP Range 216.5" (5.5m) 118.1" (3m) 49.2" (1.25m) Output 4-20 mA - - - 0-10V, 978-200Hz 4-20 mA Install Top Wall Mounting 2" NPT / G 1" NPT / G Relays (4) SPST No Relay Configuration WebCal Software Temperature 140º F (60º C) Pressure 30 PSI (2 bar) Material PVDF

13 www.flowline.com Email UsFax: | [email protected] 13 We Do Your Level Best We Do Your Level Best Small Tank EchoPod® DL14TM Multi-Function Ultrasonic Transmitter

Application Specifications

The general purpose ultrasonic level Range: 49.2” (1.25m) transmitter provides continuous level Accuracy: 0.125” (3mm) measurement up to 49.2” (1.25m) with a Resolution: 0.019” (0.5mm) Dead band: 2” (5cm) 4-20 mA signal output, and is conﬁgured Beam width: 2” (5cm) via our free Webcal software. The Configuration: WebCal® PC embedded level controller can lower cost Windows® USB 2.0 Memory: Non-volatile by replacing external control hardware. Supply voltage: 24 VDC (loop) This non-contact liquid level sensor is Consumption: 0.5W ideally suited for corrosive, sticky or dirty Loop resist.: 400Ω max liquids, and is widely selected for small Signal output: 4-20 mA, two-wire Signal invert: 4-20 mA or 20-4 mA day tank, skid, IBC, sump and process Signal fail-safe: 4 mA, 20 mA, 21 mA, tank level applications. 22 mA or hold last Contact type: (4) SPST relays Contact rating: 60 VA, 1A maximum Contact fail-safe: Power loss: Hold last Features Power on: Open, close or hold last Switch and control functions with Hysteresis: Selectable continuous level measurement output DL14-00 Process temp.: F: 20° to 140° up to 49.2” (1.25m) C: -7° to 60° Temp. comp.: Automatic Ambient temp.: F: -31° to 140° Configuration is fast and easy via Dimensions C: -35° to 60° WebCal software and USB adapter Pressure: MWP = 30 PSI (2 bar) Red - Power Enclosure rating: Type 6P, encapsulated, Blk - Return corrosion resistant & Narrow 2” beam width and short 2” Wht - TX (Out) submersible Gry - RX (In) Encl. material: Polycarbonate dead band optimized for small tanks Blu - Rly 1 Org - Rly 2 Strain relief mat.: Santoprene Yel - Rly 3 Trans. material: PVDF Four (4) programmable relays rated Pur - Rly 4 Cable jacket mat.: Polyurethane Brn - Rly Com @ 1A / 60VA for switch, pump or (1.2 m) Cable type: 9-conductor, shielded

valve control and fail-safety 48" 2.00" Cable length: 48” (1.2m) (51 mm) Process mount: 1” NPT (1” G) Mount gasket: Viton® • 1 pump or valve with 3 alarms Classification: General purpose • 2 pumps (lead-lag) with 2 alarms Compliance: CE, RoHS Approvals: cFMus • 2 pumps (duplexing) with 2 alarms • 4 independent switch point alarms (81 mm) (69 mm) PVDF transducer and 6P polycarbon- 3.20" ate enclosure for corrosive liquids 2.70" 1" NPT .89" (1" G) Automatic temperature compensation (23 mm) for accurate measurement

EchoPod

Ordering Notes DL14- 1) Install the level sensor using Flowline Process mount (1) installation fittings or equivalents. 0 NPT (US) 2) The level sensor is configured via our 1 G (Metric) WebCal software and one LI99-1001 Fob USB adapter (2) Fob USB adapter. The level sensor is LI99-1001 0 Without Fob offered with and without a Fob. Fobs 1 With Fob are universal and can be used to configure any WebCal compatible product. WebCal is a free download from our website.

14 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best EchoPod® DL24 Multi-Function Ultrasonic Transmitter Small Tank

Application Specifications

The general purpose ultrasonic level Range: 9.8' (3m) transmitter provides continuous level Accuracy: ± 0.2% of range measurement up to 9.8’ (3m) with a 4-20 Resolution: 0.039” (1mm) Dead band: 4” (10cm) mA signal output, and is conﬁgured via our Beam width: 2” (5cm) free Webcal software. The level sensor Configuration: WebCal® PC has 4 programmable relays with selectable Windows® USB 2.0 Memory: Non-volatile hysteresis and fail-safe logic. The embedded Supply voltage: 24 VDC (loop) level controller can lower cost by replacing Consumption: 0.5W external control hardware. This non-contact Loop resist.: 400Ω max Signal output: 4-20 mA, two-wire liquid level sensor is ideally suited for Signal invert: 4-20 mA or 20-4 mA corrosive, sticky or dirty liquids, and is widely Signal fail-safe: 4 mA, 20 mA, 21 mA, selected for day tank, skid, IBC, sump and 22 mA or hold last process tank level applications. Contact type: (4) SPST relays Contact rating: 60 VA, 1A maximum Contact fail-safe: Power loss: Hold last Echo loss: Open, close Features or hold last Hysteresis: Selectable • Switch and control functions with Process temp.: F: 20° to 140° C: -7° to 60° continuous level measurement output Temp. comp.: Automatic up to 9.8’ (3m) DL24-00 Ambient temp.: F: -31° to 140° C: -35° to 60° • Conﬁguration is fast and easy via Pressure: MWP = 30 PSI (2 bar) WebCal software and USB adapter Enclosure rating: Type 6P, encapsulated, Dimensions corrosion resistant & Red - Power Blk - Return submersible • Narrow 2” beam width and short 4” Wht - TX (Out) Gry - RX (In) Encl. material: Polycarbonate Blu - Rly 1 Trans. material: PVDF dead band optimized for small tanks Org - Rly 2 Yel - Rly 3 Cable jacket mat: Polyurethane Pur - Rly 4 48” Brn - Rly Com Cable type: 9-conductor, shielded • Four (4) programmable relays rated (1.2 m) Cable length: 48” (1.2m) @ 1A / 60VA for switch, pump or Process mount: 1” NPT (1” G)

valve control and fail-safety 1.1” 1/2 in NPT Mount gasket: Viton® (27 mm) Classification: General purpose • 1 pump or valve with 3 alarms 1.07” Compliance: CE, RoHS • 2 pumps (lead-lag) with 2 alarms (27 mm) Approvals: cFMus • 2 pumps (duplexing) with 2 alarms • 4 independent switch point alarms 2.7” (68 mm) 2.7” PVDF transducer and 6P polycarbonate enclosure for corrosive liquids

• Automatic temperature compensation 3.06”

1.1” 1.1” (78 mm)

for accurate measurement (27 mm) 1” NPT/G

EchoPod

Ordering Notes DL24- 1) Install the level sensor using Flowline Process mount (1) installation fittings or equivalents. 0 NPT (US) 2) The level sensor is configured via our 1 G (Metric) WebCal software and one LI99-1001 Fob USB adapter (2) Fob USB adapter. The level sensor is 0 Without Fob offered with and without a Fob. Fobs 1 With Fob are universal and can be used to configure any WebCal compatible product. WebCal is a free download from our website.

Email Us | [email protected] 15 We Do Your Level Best Small Tank EchoPod® DL34TM Multi-Function Ultrasonic Transmitter

Application Specifications

The general purpose ultrasonic level transmitter Range: 18.0' (5.5m) provides continuous level measurement up to Accuracy: ± 0.2% of range 18.0’ (5.5m) with a 4-20 mA signal output, and is Resolution: 0.079” (2mm) Dead band: 8” (20cm) conﬁgured via our free Webcal software. The level Beam width: 3” (7.6cm) sensor has 4 programmable relays with selectable Configuration: WebCal® PC hysteresis and fail-safe logic. The embedded level Windows® USB 2.0 Memory: Non-volatile controller can lower cost by replacing external Supply voltage: 24 VDC (loop) control hardware. This non-contact liquid level Consumption: 0.5W sensor is ideally suited for corrosive, sticky or dirty Loop resist.: 400Ω max Signal output: 4-20 mA, two-wire liquids, and is widely selected for day tank, skid, Signal invert: 4-20 mA or 20-4 mA IBC, sump and process tank level applications. Signal fail-safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last Contact type: (4) SPST relays Features Contact rating: 60 VA, 1A maximum Contact fail-safe: Power loss: Hold last Echo loss: Open, close • Switch and control functions with or hold last continuous level measurement output Hysteresis: Selectable up to 18.0’ (5.5m) Process temp.: F: 20° to 140° C: -7° to 60° DL34-00 Temp. comp.: Automatic • Conﬁguration is fast and easy via Ambient temp.: F: -31° to 140° WebCal software and USB adapter C: -35° to 60° Dimensions Pressure: MWP = 30 PSI (2 bar) Enclosure rating: Type 6P, encapsulated, Red - Power • Narrow 3” beam width and short 8” Blk - Return corrosion resistant & Wht - TX (Out) dead band optimized for small tanks Gry - RX (In) submersible Blu - Rly 1 Org - Rly 2 Yel - Rly 3 Encl. material: Polycarbonate Pur - Rly 4 48” Brn - Rly Com Trans. material: PVDF • Four (4) programmable relays rated @ (1.2 m) Cable jacket mat: Polyurethane 1A / 60VA for switch, pump or valve Cable type: 9-conductor, shielded

1.1” 1.1” 1/2” NPT control and fail-safety (27 mm) Cable length: 48” (1.2m) Process mount: 1” NPT (1” G) 1.07” (27 mm) Mount gasket: Viton® • 1 pump or valve with 3 alarms Classification: General purpose • 2 pumps (lead-lag) with 2 alarms Compliance: CE, RoHS Approvals: cFMus • 2 pumps (duplexing) with 2 alarms (68 mm) 2.7” • 4 independent switch point alarms

3.06” • PVDF transducer and 6P polycarbon- (78 mm) ate enclosure for corrosive liquids 2" NPT (2" G) • Automatic temperature compensation 3.4" (88 mm) 2.7” (68 mm) 2.7” for accurate measurement LI99-1001

EchoPod

Ordering Notes DL34- 1) Install the level sensor using Flowline Process mount (1) installation fittings or equivalents. 0 NPT (US) 2) The level sensor is configured via our 1 G (Metric) WebCal software and one LI99-1001 Fob USB adapter (2) Fob USB adapter. The level sensor is 0 Without Fob offered with and without a Fob. Fobs 1 With Fob are universal and can be used to configure any WebCal compatible product. WebCal is a free download from our website.

16 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best EchoPod® DS14 Ultrasonic Level Switch & Controller Small Tank

Application Specifications

The general purpose ultrasonic level switch Range: 49.2” (1.25m) provides continuous level detection up to Accuracy: 0.125” (3mm) 49.2” (1.25m) with 4 programmable relays for Resolution: 0.019” (0.5mm) Dead band: 2” (5cm) level switch or level control functions, and is Beam width: 2” (5cm) conﬁgured via our free WebCal software. The Configuration: WebCal® PC embedded level controller can lower cost by Windows® USB 2.0 Memory: Non-volatile replacing external control hardware. This non- Supply voltage: 12-24 VAC / VDC contact liquid level sensor is ideally suited for Consumption: 0.5W corrosive, sticky or dirty liquids, and is broadly Contact type: (4) SPST relays Contact rating: 60 VA, 1A maximum selected for small day tank, skid, IBC, sump Contact fail-safe: Power loss: Hold last and process tank level applications. Power on: Open, close or hold last Hysteresis: Selectable Features Process temp.: F: 20° to 140° C: -7° to 60° • Switch and control functions with Temp. comp.: Automatic Ambient temp.: F: -31° to 140° continuous level measurement output C: -35° to 60° up to 49.2” (1.25m) DS14-00 Pressure: MWP = 30 PSI (2 bar) Enclosure rating: Type 6P, encapsulated, corrosion resistant & • Conﬁguration is fast and easy via submersible WebCal software and USB adapter Encl. material: Polycarbonate Dimensions Strain relief mat: Santoprene Trans. material: PVDF • Narrow 2” beam width and short 2” Red - Power Cable jacket mat: Polyurethane dead band optimized for small tanks Blk - Return Cable type: 9-conductor, shielded Wht - TX (Out) Gry - RX (In) Cable length: 48” (1.2m) • Four (4) programmable relays rated @ Blu - Rly 1 Process mount: 1” NPT (1” G) Org - Rly 2 Mount gasket: Viton® 1A / 60VA for switch, pump or valve Yel - Rly 3 Pur - Rly 4 Classification: General purpose Brn - Rly Com Compliance: CE, RoHS

control and fail-safety (1 2 m) Approvals: cFMus

4 2 • 1 pump or valve with 3 alarms ( 1 mm) • 2 pumps (lead-lag) with 2 alarms • 2 pumps (duplexing) with 2 alarms • 4 independent switch point alarms

• PVDF transducer and 6P polycarbonate ( 1 mm) ( mm) enclosure for corrosive liquids 32 2

1 PT LI99-1001 • Automatic temperature compensation (1 G) for accurate measurement (23 mm)

EchoPod

Ordering Notes DS14- 1) Install the level sensor using Flowline Process mount (1) installation fittings or equivalents. 0 NPT (US) 2) The level sensor is configured via our 1 G (Metric) WebCal software and one LI99-1001 Fob USB adapter (2) Fob USB adapter. The level sensor is 0 Without Fob offered with and without a Fob. Fobs 1 With Fob are universal and can be used to configure any WebCal compatible product. WebCal is a free download from our website.

Email Us | [email protected] 17 We Do Your Level Best Small Tank EchoPodTM ® DL10 Ultrasonic Level Transmitter

Application Specifications

The general purpose ultrasonic level transmitter Range: 49.2” (1.25m) provides continuous level measurement up to Accuracy: 0.125” (3mm) Resolution: 0.019” (0.5mm) 49.2” (1.25m) with a 4-20 mA signal output, and Dead band: 2” (5cm) is conﬁgured via our free WebCal software. This Beam width: 2” (5cm) non-contact liquid level sensor is ideally suited Configuration: WebCal® PC for corrosive, sticky or dirty liquids, and is broadly Windows® USB 2.0 Memory: Non-volatile selected for small day tank, skid, IBC, sump and Supply voltage: 24 VDC (loop) process tank level applications. Consumption: 0.5W Loop resist.: 400Ω max Signal output: 4-20 mA, two-wire Signal invert: 4-20 mA or 20-4 mA Signal fail-safe: 4 mA, 20 mA, 21 mA, Features 22 mA or hold last Process temp.: F: 20° to 140° • Continuous non-contact level C: -7° to 60° measurement up to 49.2” (1.25m) Temp. comp.: Automatic Ambient temp.: F: -31° to 140° C: -35° to 60° • 4-20 mA output for longer signal Pressure: MWP = 30 PSI (2 bar) distances up to 1000’ (300m) DL10-00 Enclosure rating: Type 6P, encapsulated, corrosion resistant & submersible • Conﬁguration is fast and easy via Encl. material: Polycarbonate WebCal software and USB adapter Dimensions Strain relief mat.: Santoprene Trans. material: PVDF Cable jacket mat: Polyurethane • Red - Power Narrow 2” beam width and short 2” Cable type: 4-conductor, shielded Blk - Return dead band optimized for small tanks Wht - TX (Out) Cable length: 48” (1.2m) Gry - RX (In) Process mount: 1” NPT (1” G) Blu - Rly 1 Mount gasket: Viton® • PVDF transducer and 6P polycarbonate Org - Rly 2 Yel - Rly 3 Classification: General purpose enclosure for corrosive liquids Pur - Rly 4 Compliance: CE, RoHS Brn - Rly Com

(1 2 m) Approvals: cFMus

• Automatic temperature compensation 4 2 ( 1 mm) for accurate measurement ( 1 mm) ( mm) 32 2

LI99-1001 1 PT (1 G) (23 mm)

EchoPod

Ordering Notes DL10- 1) Install the level sensor using Flowline Process mount (1) installation fittings or equivalents. 0 NPT (US) 2) The level sensor is configured via our 1 G (Metric) WebCal software and one LI99-1001 Fob USB adapter (2) Fob USB adapter. The level sensor is 0 Without Fob offered with and without a Fob. Fobs 1 With Fob are universal and can be used to configure any WebCal compatible product. WebCal is a free download from our website.

18 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best EchoPod® DX10 Ultrasonic Level Sensor Small Tank

Application Specifications

The general purpose ultrasonic level transmitter Range: 49.2” (1.25m) provides continuous level measurement up to Accuracy: 0.125” (3mm) 49.2” (1.25m) with a selectable 0-5 VDC, 0-10 Resolution: 0.019” (0.5mm) Dead band: 2” (5cm) VDC or 976-2000 Hz frequency signal output, Beam width: 2” (5cm) and is conﬁgured via our free WebCal software. Configuration: WebCal® PC Select the voltage output for interface with Windows® USB 2.0 analog input cards. Select the frequency output Memory: Non-volatile Supply voltage: 12-28 VDC for interface with discrete input cards. This non- Consumption: 0.5W contact liquid level sensor is ideally suited for Signal output: 0-5 V, 0-10 V, 976-2000 Hz corrosive, sticky or dirty liquids, and is widely Frequency: Sink current, 15 mA nominal selected for small day tank, skid, IBC, sump and Signal invert: 5-0 V, 10-0 V, 2000-976 Hz Signal fail-safe: Full, empty or hold last process tank level applications. Process temp.: F: 20° to 140° C: -7° to 60° Temp. comp.: Automatic Ambient temp.: F: -31° to 140° C: -35° to 60° Features Pressure: MWP = 30 PSI (2 bar) Enclosure rating: Type 6P, encapsulated, • Continuous non-contact level DX10-00 corrosion resistant & measurement up to 49.2” (1.25m) submersible Encl. material: Polycarbonate Strain relief mat: Santoprene • Selectable voltage (analog) or Dimensions Trans. material: PVDF frequency (discrete) signal outputs Cable jacket mat: Polyurethane Cable type: 6-conductor, shielded - Power Red Cable length: 48” (1.2m) • Conﬁguration is fast and easy via Blk - Return Wht - TX (Out) Process mount: 1” NPT (1” G) WebCal software and USB adapter Gry - RX (In) Mount gasket: Viton® Blu - Rly 1 Classification: General purpose Org - Rly 2 Compliance: CE, RoHS • Narrow 2” beam width and short 2” Yel - Rly 3 Pur - Rly 4 Approvals: cFMus Brn - Rly Com dead band optimized for small tanks (1 2 m)

4 2 • PVDF transducer and 6P polycarbonate ( 1 mm) enclosure for corrosive liquids

• Automatic temperature compensation for accurate measurement ( 1 mm) ( mm) 32 2

1 PT (1 G) (23 mm)

EchoPod

Ordering Notes DX10- 1) Install the level sensor using Flowline Process mount (1) installation fittings or equivalents. 0 NPT (US) 2) The level sensor is configured via our 1 G (Metric) WebCal software and one LI99-1001 Fob USB adapter (2) Fob USB adapter. The level sensor is 0 Without Fob offered with and without a Fob. Fobs 1 With Fob are universal and can be used to configure any WebCal compatible product. WebCal is a free download from our website.

Email Us | [email protected] 19 We Do Your Level Best Software IntroductionTM to WebCal™ Software

WebCal™ Software WebCal PC software is a utility program that allows users to easily configure their EchoSonic II and EchoPod level transmitters, switches and controllers. Download your free copy of WebCal at www.flowline.com/webcal.php, and connect your sensor through our Fob USB® adapter. Develop your configuration using pre-programmed function menus as the tank graphic and set point fields automatically change to match your configuration. Then, input your level set point values and click the Write to Unit button. Your configuration will be downloaded into the sensor and tested in less than a second. Last, click the Wiring Diagram button to open an ACAD wiring schematic of your configuration in PDF format. Print the document, discon- nect the sensor and wire it per the schematic. It’s that simple.

Configuration files can be named, saved, emailed, printed, opened and used again under revision control. The advanced feature page enables you to change the measurement signal output filtering and invert relay states from NO to NC. As new software or firmware becomes available, they can be downloaded and updated through WebCal. Take control of your level process with WebCal software, and experience the future of level automation today.

Compatible Sensors

EchoPod® Ultrasonic Sensors

DL34 DL24 DL14 DS14 DL10 DX10 Page 16 Page 15 Page 14Page 17 Page 18 Page 19

EchoSonic® II Ultrasonic Transmitters

LU2X-0X LU27-0X LU2X-4X LU27-4X Pages 32-33 Pages 32-33 Pages 34-35 Pages 34-35

20 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Sensor Configuration Made Simple Software

Wiring Diagram - Exportable PDF format Easy Configuration

• 169 conﬁgurations with pull down menu selections

• Graphic interface lets you visualize your conﬁguration

• Applicable level set point ﬁelds appear automatically

• Installs and tests conﬁguration in less than a second

• Available PDF wiring diagram for each conﬁguration

• Technical help menu with FAQ's, tips and glossary

• Rapidly program sensors to the same conﬁguration

System Requirements Document Control

• Windows® 7, Vista, XP or 2000 • Save conﬁguration ﬁles for future use or reference

• (1) USB® 2.0 Port • Print wiring diagrams and conﬁguration text ﬁles

• 10 mB hard disk space • Email conﬁguration ﬁles to other remote users

• 256 mB RAM LI99-1001

EchoPod Configuration EchoSonic II Configuration

21 www.flowline.com Email UsFax: | [email protected] 21 We Do Your Level Best We Do Your Level Best Bulk Tank IntroductionTM to Bulk Tank Level Solutions

Level Measurement, Indication & Control Level transmitters measure liquid height within a specified range and translate this value into a proportional 4-20 mA signal output for interface with external devices such as an indicator, controller, PLC or telemetry device. Flowline level transmitters and indicators are offered in general purpose, intrinsically safe or explosion proof types for use in hazardous locations. A hazardous location is generally defined as an area where flammable gases, vapors or dusts occur in such concentrations that they could explode. Instruments that are installed in these locations are designed and certified to be intrinsically safe or explosion proof to ensure that they cannot cause such an explosion.

Intrinsically Safe The approach behind intrinsically safe equipment is to limit the electrical and thermal energy available to and generated by devices within the hazardous location. Therefore, intrinsically safe sensors are inherently low voltage designs that cannot cause sparks or ignition. Additionally, the power and signal wires of these sensors are protected by Zener safety barriers which limits their voltage and current.

Explosion Proof The approach behind explosion proof equipment is to physically isolate potential ignition sources by enclosing them in a case that’s capable of withstanding an explosion within the hazardous location. The term case, generally refers to an explosion proof enclosure and associated conduit installation as defined by the National Fire Protection Association and National Electrical Code in the United States.

Hazardous Measurement & Indication EchoSafe® XP EchoTouch™ IS DeltaSpan® IS FluidWell™ XP DataLoop™ IS Ultrasonic Ultrasonic Pressure Level Level Transmitter Transmitter Transmitter Indicator Indicator

XP88/89 LU20LD31/32 300400 LI25-2001 Pages 26-27 Pages 24-25 Pages 28-29 Page 30 Page 31

XP88/89 LU20 LD31/32 300400 LI25 Type Ultrasonic Pressure Type Field Mount Panel Mount Class XP IS Class XP IS Range 32.8' (10m) 18' (5.4m) 46' (14m) Display LCD Output 4-20 mA Backlight No Yes Install Top Wall Submersible Input (1) 4-20 mA Mounting 2" NPT / G - - - Supply 10-30 VDC (Loop) Configuration Push Button Factory Function Display

Temperature 140˚F (60˚C) 176˚F (80˚C) Enclosure NEMA 4, 7, 9 NEMA 4X Pressure 30 PSI (2 bar) 2x Full Span Material PVDF 316 SS

22 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Measurement, Indication & Control Bulk Tank

General Purpose Measurement, Indication & Control EchoTouch™ EchoSpan® EchoSonic® II FloaTek® DeltaSpan® DeltaSpan® Ultrasonic Ultrasonic Ultrasonic Float Pressure Pressure Transmitter Transmitter Transmitter Transmitter Transmitter Transmitter

LU30LU8X LU2X LV55LD30 LD3X Page 40 Pages 36-37 Pages 32-35 Page 41 Page 38 Page 39

LU30 LU80-84 LU23, LU27-29 LV55 LD30 LD31/32 Type Ultrasonic Float Pressure Class GP Range 24.5' (7.4m)32.8' (10m) 96" (2.4m) 69' (21.1m) 46' (14m) Output 4-20 mA Install Top Wall External Submersible Mounting 2" NPT / G 1/4" NPT - - - Configuration Push Button WebCal Factory

Temperature 140˚F (60˚C) 185˚F (85˚C) 200˚F (93˚C) 150˚F (66˚C) Pressure 30 PSI (2 bar) 2x Full Span 30 PSI (2 bar) 2x Full Span Material PVDF 316 SS DataLoop™ DataView™ Commander™ DataPoint™ Level Indicator Level Controller Multi-Tank Level Controller Level Controller

LI25 LI55 LI90 LC52 Page 42 Page 43 Page 44 Page 45

LI25 LI55 LI90 LC52 Type Panel Mount Rail Mount Class IS / GP GP Display LCD LED LCD LED Backlight Yes No Yes - - - Input (1) 4-20 mA (2 or 4) 4-20 mA (1) 4-20 mA 4-20 Repeater No Yes (2 Input) / No (4 Input) No Yes Relays - - - (4) SPDT (6) SPDT (2) SPDT Supply 12-30 VDC (Loop) 85-265 VAC 10-30 VDC 120-240 VAC Auto Fill or Empty, High & Function Display Display, Auto Fill or Empty, High & Low Alarm Low Alarm Enclosure NEMA 4X Faceplate - - -

23 www.flowline.com Email UsFax: | [email protected] 23 We Do Your Level Best We Do Your Level Best Bulk Tank EchoTouch™TM IS Ultrasonic Level Transmitter

Application Specifications

CSA approved intrinsically safe for use in Range: 6” to 18.0’ (15cm to 5.4m) hazardous locations, the two-wire ultra- Accuracy: ±0.25% of range sonic transmitter provides non-contact Resolution: 0.125” (3mm) level measurement up to 18’ or 5.4m, and Dead band: 6” (15cm) Beam width: 8° conical is ideally suited for challenging corrosive, Configuration: Push button slurry or waste liquids. Push button cali- Memory: Non-volatile brated, the transmitter is typically selected Display type: LCD, 4-digit Display units: Inch or cm for atmospheric bulk storage, day tank and Supply voltage: 12-32 VDC waste sump applications located within a Loop resist.: 600 Ohms @ 24VDC classified area. Media examples include Signal output: 4-20 mA, two-wire Signal invert: 4-20 mA, 20-4 mA diesel fuel and sulfuric acid. Signal fail-safe: Reverts to safe state during echo loss Process temp.: F: -20° to 140° Features C: -4° to 60° Temp. comp.: Automatic Intrinsically safe transmitter for Ambient temp.: F: -40° to 140° C: -40° to 60° use in hazardous environments Pressure: 30 psi (2 bar) @25° C., derated @1.667 psi LCD digital display indicates (.113 bar) per ºC above 25ºC Enclosure rating: NEMA 4X (IP65) level in inches or centimeters Encl. material: PP, UL94VO LU20-5001-IS Conduit entrance: Single, 1/2" NPT EasyCal simple push button Trans. material: PVDF calibration for all user set points Process mount: 2” NPT (2” G) Mount gasket: Viton® Classification: Intrinsically Safe Polypropylene enclosure rated NEMA Compliance: CE 4X with rugged PVDF transducer Approvals: CSA: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; T3C Adjustable dead band and range Parameters: CSA: Vmax < 32.0 V; filters eliminate false echo returns Imax < 130 mA; Ca = 0 µF; La = 0 µH Dimensions Certificates: CSA: LR 79326

Markets

• Oil & gas • Pulp & paper • Petrochemical • Food & beverage • Municipal wastewater • Paint & coatings • Power generation • Transportation • Biotech & pharmaceutical

24 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Non-Contact Intrinsically Safe Measurement Bulk Tank

Beam Width User Friendly

Configuration is fast and easy Depth Width with our LCD display and EasyCal (Feet) (Inches) push button menu. Simply input 11.2 22.1 your 4 mA and 20 mA set points 32.9 and install. It's intrinsically safe 43.7 54.6 level made simple! 65.4 76.2 87.1 97.9 10 8.8 11 9.6 12 10.4 13 11.3 14 12.1 ' 15 13.0 16 13.8 17 14.6 18 15.5 Faceplate

Temp / Minimum Dead Band Derating 5

(in)

12 Safety Barrier 10 Complete your intrinsically safe level measurement package with an appropriate intrinsic safety 8 barrier. The LB11-1001 intrinsic safety barrier is CSA approved to match the entity parameters of the LU20-5001-IS ultrasonic transmitter. 6

LB11-1001 4

-40 -20 0 20 40 60 80 (ºC) LM50-1001 IP 65

EchoTouch IS

Ordering Notes LU20-50 1-IS 1) Install the level sensor using Flowline installation fittings or equivalents. Process mount (1) (2) (3) 2) When locating the level sensor in a hazardous 0 NPT (US) environment, order the LB11-1001 intrinsic 6 G (Metric) safety barrier. 3) For intrinsically safe level indication, package the level sensor with the DataLoop LI25-2001 indicator.

25 www.flowline.com Email UsFax: | [email protected] 25 We Do Your Level Best We Do Your Level Best Bulk Tank EchoSafeTM ® XP Ultrasonic Level Transmitter

Application Specifications

FM approved for hazardous Range: XP88: 8” to 26.2’ environments, the explosion proof (20cm to 8m) ultrasonic level transmitter provides XP89: 8” to 32.8’ (20cm to 10m) continuous level measurement Accuracy: ± 0.2% of range up to 32.8’ (10m) with a 4-20 mA Resolution: 0.079” (2mm) signal output, and is configured via Dead band: 8” (20cm) Beam width: 3” (7.6cm) the integral push button display Configuration: Push button module. This non-contact liquid Memory: Non-volatile level sensor is ideally suited for Display type: LCD, 6-digit corrosive, ultrapure, sticky or dirty Display units: Inch, cm, percent, feet or meter liquids, and is widely selected for Supply voltage: 18-28 VDC (loop) bulk storage, day tank, lift station Loop resistance: 250 Ohms max @ 24 VDC and process tank level applications Signal output: 4-20 mA, two-wire XP88 / 89 Signal invert: 4-20 mA or 20-4 mA located in a classified area. Signal fail-safe: 4 mA, 20mA, 21 mA, 22 mA or hold last Process temp.: F: -4° to 140° C: -20 to 60° Features Temp. comp.: Automatic Process temp.: F: -4° to 140° • Explosion proof level transmitter for use in hazardous areas C: -20 to 60° Pressure: MWP = 30 psi (2 bar) Enclosure rating: Type 4 • Offered in 2 measurement ranges from 26.2’ (8m) to 32.8’ (10m) Encl. material: Aluminum Window material: Glass Conduit entrance: Dual, 1/2” NPT • Configuration is simple via integral push button display module Trans. material: PVDF Process mount: 2” NPT • Type 4 aluminum XP windowed enclosure with dual conduit ports Mount gasket: Viton® Classification: Explosion proof Compliance: CE, RoHS • LCD display indicates level in inches, centimeters or percent of span Approvals: FM: Class I, Div I Groups A, B, C, D • Narrow 3” beam width for applications with limited measurement space Class II, Div I, Groups E, F, G, Class III, Div I • Rugged PVDF transducer and process mounting plug for corrosive liquids

• Automatic temperature compensation for accurate measurement

Markets Tech Tip For explosion proof level measurement and indication, package • Oil & gas EchoSafe with the Fluidwell level indicator. See page 30 for more • Pulp & paper information. It’s explosion proof indication made simple. • Petrochemical • Food & beverage • Municipal wastewater • Paint & coatings • Power generation • Transportation • Biotech & pharmaceutical

26 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Non-Contact Explosion Proof Measurement Bulk Tank

Configuration DISPLAY

SELECT / FAST TOP MENU Button

UNITS TANK OUTPUT HELP RUN

7RDFWLYDWHWKHWRS PHQXSUHVVDQG KROG6(/(&7)$67 SELECT SELECT SELECT SELECT EXWWRQIRUVHFRQGV Display Units 4-20 Span Fail-Safety Help Inches Height (4 mA) Safe Setup Feet Fill H (20 mA) Reverse mA Test P Centimeters Help R all Meters Percentage Dimensions

4.44" (11.3 cm) 4.00" 1/2" NPT (10.2 cm)

EchoSafe™

UP SELECT DOWN

3.89" (9.9 cm) FAST 6.06" 15.4 cm 6.06" (15.4 cm)

2" NPT

LM50-1001 EchoSafe XP

Ordering Notes XP8 -0 1) Install the level sensor using Flowline installation Sensor range (1) (2) fittings or equivalents. 8 8m (26.2') 2) For explosion proof level indication, package 9 10m (32.8') the level sensor with the FluidWell indicator.

Email Us | [email protected] 27 We Do Your Level Best Bulk Tank DeltaSpan™TM LD31 IS Pressure Level Transmitter

Application Specifications

The intrinsically safe submersible pressure level Range: -SX01: 0 to 5 psi (0.34 bar), transmitter provides continuous level measure- 0 to 11’ (0 to 3.4m) wc ment up to 46’ (14m) of water column with a 4-20 -SX11: 0 to 10 psi (0.69 bar), mA signal output. Select the LD31 liquid level 0 to 23’ (0 to 7m) wc -SX21: 0 to 15 psi (1.0 bar), sensor for relatively clean water, light weight oil 0 to 34’ (0 to 10.4m) wc or diluted chemical. Application examples include -SX31: 0 to 20 psi (1.38 bar), wet wells and water remediation. 0 to 46’ (0 to 14m) wc Accuracy: ± 0.25% of full scale Configuration: None, fixed span Supply voltage: 10 to 28 VDC Loop resist.: 900 Ohms Features Signal output: 4-20 mA, two-wire Process temp.: F: 0° to 176° Corrosion resistant 316 SS transducer C: -18° to 80° Temp. comp.: F: 0 to 176° with polyurethane or ETFE cable C: -18 to 80° Proof pressure: 2 x full scale Strong cable design with maintenance Trans. rating: NEMA 6 (IP67) free breather tube and vent filter Trans. material: 316 SS, 316L SS, Buna-N & PVC Trans. thread: 1/2” NPT Automatic temperature compensation for Cable type: 2-conductor, shielded accurate measurement with vent tube Cable length: -SX01 & SX11: 40’ (12.2m) -SX21 & SX31: 60’ (18.3m) Cable material: -S3X1: Polyurethane -S4X1: ETFE Safety Barrier Classification: Intrinsically safe Class I Div. 1 Groups A, B, Complete your intrinsically safe C & D; Class II Div. 1 Groups level measurement package with E, F & G; Class III Div. 1 T4 @ 80 ºC ambient an appropriate intrinsic safety Compliance: CE, UL Intrinsically safe barrier. The LB11-1001 intrinsic LD31-S301 to UL standard 913 safety barrier is CSA approved IEC 61000-4-2:2001 and matches the entity parameters IEC 61000-4-3:2006 IEC 61000-4-4:2004 of the LD31 or LD32 pressure LB11-1001 IEC 61000-4-5:2005 transmitter. IEC 61000-4-6:2006 IEC 61000-4-8:2001 CENELEC EN 55011:2003 137 CENELEC EN 61326:2003 89/336/EEC EMC Directive 5HG Parameters: Vmax = 28 VDC %ODFN PP Imax = 93 mA &OHDU 9HQW 6KOG Ci = 0.051_F Li = 240_H PP Pi = 0.651_W

DeltaSpan IS

Ordering Notes LD31-S 1 1) To install the level sensor through the tank top with a compact junction box, 2” mounting plug and cable connector, order the LD90-1001 Cable jacket (1) (2) pressure sensor mounting kit. 3 Polyurethane 2) Add the LB11-1001 intrinsic safety barrier to 4 ETFE Sensor range complete your intrinsically safe level measurement 0 5 psi (0.34 bar) / 11’ (3.4m) wc package. 1 10 psi (0.69 bar) / 23’ (7m) wc 2 15 psi (1.0 bar) / 34’ (10.4m) wc 3 20 psi (1.38 bar) / 46’ (14m) wc LD90-1001

28 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best DeltaSpan™ LD32 IS Pressure Level Transmitter Bulk Tank

Application Specifications

The intrinsically safe submersible pressure Range: -SX01: 0 to 5 psi (0.34 bar), level transmitter is offered in two styles for 0 to 11’ (0 to 3.4m) wc different liquid types and provides continuous -SX11: 0 to 10 psi (0.69 bar), 0 to 23’ (0 to 7m) wc level measurement up to 46’ (14m) of water -SX21: 0 to 15 psi (1.0 bar), column with a 4-20 mA signal output. Select 0 to 34’ (0 to 10.4m) wc the LD32 liquid level sensor for dirty, foaming -SX31: 0 to 20 psi (1.38 bar), 0 to 46’ (0 to 14m) wc or slurry type liquids. Application examples Accuracy: ± 0.25% of full scale include municipal sewer or storm pump lift Configuration: None, fixed span stations. Supply voltage: 10 to 28 VDC Loop resist.: 900 Ohms Signal output: 4-20 mA, two-wire Process temp.: F: 0° to 176° C: -18° to 80° Features Temp. comp.: F: 0 to 176° C: -18 to 80° Corrosion resistant 316 SS transducer Proof pressure: 2 x full scale with polyurethane or ETFE cable Trans. rating: NEMA 6 (IP67) Trans. material: 316 SS, 316L SS, Buna-N Strong cable design with maintenance Trans. thread: 1/2” NPT free breather tube and vent filter Cable type: 2-conductor, shielded with vent tube Cable length: -SX01 & SX11: 40’ (12.2m) Rugged clog and damage resistant -SX21 & SX31: 60’ (18.3m) diaphragm design Cable material: -S3X1: Polyurethane (IS) -S4X1: ETFE (IS) Classification: Intrinsically safe Automatic temperature compensation for Class I Div. 1 Groups A, B, accurate measurement C & D; Class II Div. 1 Groups E, F & G; Class III Div. 1 T4 @ 80 ºC ambient LD32-S301 Compliance: CE, UL Intrinsically safe to UL standard 913 IEC 61000-4-2:2001 IEC 61000-4-3:2006 PP IEC 61000-4-4:2004 IEC 61000-4-5:2005 IEC 61000-4-6:2006 IEC 61000-4-8:2001 Shld Vent (Clear) CENELEC EN 55011:2003 Black (-) CENELEC EN 61326:2003 PP Red (+) 89/336/EEC EMC Directive Parameters: Vmax = 28 VDC Imax = 93 mA 137 Ci = 0.051_F Li = 240_H PP Pi = 0.651_W

DeltaSpan IS

Ordering Notes LD32-S 1 1) To install the level sensor through the tank top with a compact junction box, 2” mounting plug and cable connector, order the LD90-1001 Cable jacket (1) (2) pressure sensor mounting kit. 3 Polyurethane 2) Add the LB11-1001 intrinsic safety barrier to 4 ETFE Sensor range complete your intrinsically safe level measurement 0 5 psi (0.34 bar) / 11’ (3.4m) wc package. 1 10 psi (0.69 bar) / 23’ (7m) wc 2 15 psi (1.0 bar) / 34’ (10.4m) wc 3 20 psi (1.38 bar) / 46’ (14m) wc LD90-1001

29 www.flowline.com Email UsFax: | [email protected] 29 We Do Your Level Best We Do Your Level Best Bulk Tank TMFluidWell™ XP Level Indicator

Application Specifications

CSA approved explosion proof Display type: LCD, 5 1/2 digit for hazardous environments, Display units: Engineering Display output: 0.001 to 99,999 the loop powered level Display height: Main: 1” (26mm) indicator displays engineering Secondary: 0.3” (8mm) units connected in series Decimal point: 0, 1, 2 or 3 with one 4-20 mA continuous Configuration: Push button Memory: Non-volatile level transmitter. Select this Sensor input: (1) 4-20 mA transmitter level indicator for hazardous Loop power: 10-30 VDC applications with an explosion Voltage drop: 2.6 VDC @ 20 mA Ambient temp.: F: -40° to 176° proof level sensor. The C: -40° to 80° windowed ﬁeld enclosure is Enclosure rating: NEMA 4, 7 & 9 (IP66) wall mounted. Enclosure mat’l.: Aluminum Window mat’l.: Glass Conduit entrance: Dual, 3/4” NPT 300400 Classification: Explosion proof Features Compliance: CE, UL Approvals: CSA: Class I, Groups C, D; Class II, Groups E, F, G; Aluminum XP windowed Class III; T-code = T4 enclosure with dual conduit ports

Easy conﬁguration via the push button display module Side View Top View

6.25" (159 mm) LCD display indicates engineering 5.13" (130 mm) units and descriptors 5.13" (130 mm)

Non-volatile memory with security 3/4" NPT password protection Hole

Pie graph indicates the percentage of measured span 6.34" (161 mm) 6.25" (159 mm) 5.13" (130 mm)

1.50" (38 mm) 7/16" Tech Tip

For explosion proof level measurement and indication, package your meter with the EchoSafe XP ultrasonic transmitter. See pages 26-27 for more details. It’s explosion proof measurement made simple.

FluidWell XP

Ordering Notes 300400(1) 1) For explosion proof level indication, package the level indicator with the EchoSafe transmitter.

30 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best DataLoop™ IS Level Indicator Bulk Tank

Specifications

Display type: LCD, 5-digit Display units: Engineering Display output: -9999 to 99999 Display height: 0.6” (15mm) Decimal point: Floating Backlight: LED, orange Configuration: Push button Memory: Non-volatile Sensor input: (1) 4-20 mA transmitter Loop power: 12-30 VDC Voltage drop: 2.0 VDC w/o backlight 5.7 VDC w/backlight LI25-2001 Ambient temp.: F: -22° to 149° C: -30° to 65° Enclosure type: 1/8 DIN, panel mount Enclosure rating: NEMA 4X (IP65) faceplate Application Features Enclosure mat’l: Polycarbonate Classification: Intrinsically safe FM and CSA approved intrinsically Compliance: CE Easy configuration via the push Approvals: FM, CSA: Class I, Div I, safe, the loop powered level button display module Groups A, B, C, D; indicator displays engineering units Class II, Div I, Groups E, F, G; connected in series with one 4-20 LCD main display with second- Class II, Div I; Class I Zone 0, Group IIC; T-code = T4 mA continuous level transmitter. ary unit and bar graph display Select the LI25-2001 level indicator DIN enclosure with NEMA 4X for hazardous applications with an faceplate and shallow case Side View intrinsically safe sensor. For field 1.76" (45 mm) mount installation, add a single or Linear, square root and pro- two indicator NEMA box. grammable exponent functions

Non-volatile memory with 24 ( 2 mm) Tech Tip security password protection

For field mount installation in a NEMA Windowed NEMA box acces- 3.2" 4X, corrosion resistant polycarbon- sory for field installations 0.59" (81 mm) (15 mm) 3.6" ate enclosure, order the appropriate (91 mm) single or two indicator box. Each enclosure comes with precut panels Top View and mounting hardware. It's intrinsically safe indication made simple.

2.5" (64 mm) Shown with Shown with

LM91-1001 LM93-1001 3.61" (92 mm)

4.68" (119 mm) DataLoop IS

Ordering Notes LI25-2001(1) 1) For field mount installation in a NEMA 4X polycarbonate box, order the LM91-1001 (single indicator, non-windowed) or LM91-2001 (two indicator, non-windowed); or LM92-1001 (single IP 65 indicator, windowed) or LM93-1001 (two indicator, windowed) enclosure.

31 www.flowline.com Email UsFax: | [email protected] 31 We Do Your Level Best We Do Your Level Best Bulk Tank EchoSonicTM ® II Ultrasonic Level Transmitter

Specifications

Range: LU27: 4” to 9.8’ (10cm to 3m) LU23: 8” to 18.0’ (20cm to 5.5m) LU28: 8” to 26.2’ (20cm to 8m) LU29: 8” to 32.8’ (20cm to 10m) Accuracy: ± 0.2% of range Resolution: LU27: 0.019” (0.5mm) LU23: 0.039” (1mm) LU28/29: 0.079” (2mm) Dead band: LU27: 4” (10cm) LU28-00 LU27-00 LU23/28/29: 8” (20cm) Beam width: LU27: 2” (5cm) LU23/28/29: 3” (7.6cm) Features Configuration: WebCal® PC Windows® USB 2.0 • Offered in 4 measurement ranges Memory: Non-volatile Supply voltage: 24 VDC (loop) from 9.8’ (3m) to 32.8’ (10m) Consumption: 0.5W Loop resistance: 500 ohms @ 24 VDC • DSP auto adaptive filters enable Signal output: 4-20 mA, two-wire plug and play operation optimizing Signal invert: 4-20 mA or 20-4 mA Application Signal fail-safe: 4 mA, 20 mA, 21 mA, signal output filtering and obstacle 22 mA or hold last Offered in a type 6P enclosure recognition Process temp.: F: -4º to 140º with cable interface, the general C: -20º to 60º purpose ultrasonic level trans- • Submersible type 6P enclosure is Temp. comp.: Automatic Ambient temp.: F: -31º to 140º mitter provides continuous level ideal for sump and below grade C: -35º to 60º measurement up to 32.8’ (10m) installations Pressure: MWP = 30 PSI (2 bar) with a 4-20 mA signal output, and Enclosure rating: Type 6P, encapsulated, is configured via our free Webcal • Configuration is fast and easy via corrosion resistant & WebCal software and USB adapter submersible software. This non-contact liquid Encl. material: Polycarbonate level sensor is ideally suited for Trans. material: PVDF corrosive, ultrapure, sticky or dirty • Narrow 2” or 3” beam width for ap- Cable jacket mat: Polyurethane plications with limited measurement Cable type: 4-conductor, shielded liquids, and is broadly selected for space Cable length: 10’ (3m) bulk storage, day tank, lift station Process mount: LU27: 1” NPT (1” G) and process tank level applications. LU23/28/29: 2” NPT (2” G) • Short 4” or 8” dead band maximiz- Mount gasket: Viton® es the measurable filling capacity Classification: General purpose of the tank Compliance: CE, RoHS Approvals: cFMus • PVDF transducer and 6P polycarbonate enclosure for corrosive liquids

• Automatic temperature compensation for accurate measurement LU23/28/29 Side View

PP Dimensions LU27 Side View

P PP &DEOH

PP 137

PP * PP PP 137 PP

* PP

32 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Non-Contact Measurement with Cable Bulk Tank

Configuration

Our powerful WebCal software makes EchoSonic II configuration fast and easy. Take control of your level process with WebCal's intuitive interface, pre-programmed menus, tank set point graphics and custom wiring diagrams. To configure EchoSonic II, simply create or open a saved configuration file, click Write to Unit, print or email the PDF wiring diagram and install. To get more information and download your free copy, go to www.flowline.com/webcal.php

Easy Configuration • Easy configurations with pull down menu selection • Set operational range to match that of your application • Setup fail-safe, start-up and Empty output settings • Installs and tests configuration in less than a second • Available PDF wiring diagram for each configuration • Technical help menu with FAQ's, tips and glossary • Rapidly program sensors to the same configuration

Document Control • Save configuration files for future use or reference • Print wiring diagrams and configuration text files • Email configuration files to other remote users

LI99-1001

EchoSonic

Ordering Notes LU2 - 1) Install the level sensor using Flowline installation fittings or equivalents. Sensor range 2) The level sensor is configured via our 7 3m (9.8') WebCal software and one LI99-1001 Fob 3 5.5m (18.0') 8 8m (26.2') USB adapter. The level sensor is offered 9 10m (32.8') with and without a Fob. Fobs are universal Process mount (1) and can be used to configure any WebCal 0 NPT (US) compatible product. WebCal is a free 1 G (Metric) download from our website. Fob USB adapter (2) 0 Without Fob 1 With Fob

Email Us | [email protected] 33 We Do Your Level Best Bulk Tank EchoSonicTM ® II Ultrasonic Level Transmitter

Specifications

Range: LU27: 4” to 9.8’ (10cm to 3m) LU23: 8” to 18.0’ (20cm to 5.5m) LU28: 8” to 24.6’ (20cm to 8m) LU29: 8” to 32.8’ (20cm to 10m) Accuracy: ± 0.2% of range Resolution: LU27: 0.019” (0.5mm) LU23: 0.039” (1mm) LU28/29: 0.079” (2mm) Dead band: LU27: 4” (10cm) LU27-40 LU23/28/29: 8” (20cm) Beam width: LU27: 2” (5cm) LU23/28/29: 3” (7.6cm) Configuration: WebCal® PC Features Windows® USB 2.0 Memory: Non-volatile LU28-40 Supply voltage: 24 VDC (loop) • Offered in 4 measurement ranges Consumption: 0.5W from 9.8’ (3m) to 32.8’ (10m) Loop resistance: 500 ohms @ 24 VDC Signal output: 4-20 mA, two-wire Application • DSP auto adaptive filters enable Signal invert: 4-20 mA or 20-4 mA Signal fail-safe: 4 mA, 20 mA, 21 mA, Offered in a NEMA 4X enclosure plug and play operation optimizing 22 mA or hold last Process temp.: F: -4º to 140º with conduit interface, the general signal output filtering and obstacle recognition C: -20º to 60º purpose ultrasonic level transmitter Temp. comp.: Automatic provides continuous level measure- Ambient temp.: F: -31º to 140º ment up to 32.8’ (10m) with a 4-20 • Configuration is fast and easy via C: -35º to 60º WebCal software and USB adapter Pressure: MWP = 30 PSI (2 bar) mA signal output, and is configured Enclosure rating: NEMA 4X (IP65) via our free Webcal software. This Encl. material: Polycarbonate non-contact liquid level sensor is • Narrow 2” or 3” beam width Trans. material: PVDF for applications with limited Cable jacket mat: Polyurethane ideally suited for corrosive, ultra- Cable type: 4-conductor, shielded pure, sticky or dirty liquids, and is measurement space Process mount: LU27: 1” NPT (1” G) broadly selected for bulk storage, LU23/28/29: 2” NPT (2” G) Mount gasket: Viton® day tank, lift station and process • Short 4” or 8” dead band maximizes the measurable filling capacity of the Classification: General purpose tank level applications. Compliance: CE, RoHS tank Approvals: cFMus

• PVDF transducer and NEMA 4X polycarbonate enclosure for Dimensions corrosive liquids • Automatic temperature compensa- Top View tion for accurate measurement LU23/28/29 Side View

PP PP

LU27 Side View

2 (133 mm) PP PP 137

* PP PP (1 mm) PP 3 (62 mm) (4 mm) 1.25" 1" 2.4" 1 (32 mm) (1" )

34 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Non-Contact Measurement with Conduit Bulk Tank

Configuration

Document Control • Save configuration files for future use or reference • Print wiring diagrams and configuration text files • Email configuration files to other remote users

LI99-1001

IP 65

EchoSonic

Ordering Notes LU2 - 1) Install the level sensor using Flowline installation fittings or equivalents. Sensor range 2) The level sensor is configured via our 7 3m (9.8') WebCal software and one LI99-1001 Fob 3 5.5m (18.0') 8 8m (26.2') USB adapter. The level sensor is offered 9 10m (32.8') with and without a Fob. Fobs are universal Process mount (1) and can be used to configure any WebCal 4 NPT (US) compatible product. WebCal is a free 5 G (Metric) download from our website. Fob USB adapter (2) 0 Without Fob 1 With Fob

35 www.flowline.com Email UsFax: | [email protected] 35 We Do Your Level Best We Do Your Level Best Bulk Tank EchoSpanTM ® Ultrasonic Level Transmitter

Specifications

Range: LU80: 4” to 9.8’ (10cm to 3m) LU81: 8” to 18.0’ (20cm to 5.5m) LU83: 8” to 26.2’ (20cm to 8m) LU84: 12” to 32.8’ (30cm to 10m) Accuracy: ± 0.2% of range LU81-84 Resolution: LU80: 0.019” (0.5mm) LU81/83: 0.039” (1mm) LU84: 0.078” (2mm) Dead band: LU80: 4” (10cm) LU81/83: 8” (20cm) LU84: 12” (30cm) Beam width: LU80: 2” (5cm) LU81/83/84: 3” (7.6cm) Configuration: Push button Memory: Non-volatile Faceplate Display type: LCD, 6-digit Display units: Inch, cm and percent Supply voltage: 12-28 VDC Loop resist.: 500 Ohms @ 24 VDC Signal output: 4-20 mA, two-wire Signal invert: 4-20 mA, 20-4 mA Signal fail-safe: 4mA, 20mA, 21mA, 22mA or hold last Process temp.: F: -4° to 140° C: -20° to 60° Application Features Temp. comp.: Automatic Ambient temp.: F: -31° to 140° The general purpose ultrasonic level • Offered in 4 measurement ran- C: -35° to 60° transmitter provides continuous level Pressure: MWP = 30 psi (2 bar) ges from 9.8’ (3m) to 32.8’ (10m) Enclosure rating: NEMA 4X (IP65) measurement up to 32.8’ (10m) with Encl. material: Polycarbonate a 4-20 mA signal output, and is con- • Conﬁguration is simple via inte- Encl. hardware: Brass & stainless ﬁgured via its integral push button Enclosure vent: Water tight membrane gral push button display module Conduit entrance: Dual, 1/2” NPT display module. This non-contact liq- Trans. material: PVDF uid level sensor is ideally suited for Process mount: LU80: 1” NPT (1” G) • LCD display indicates level in corrosive, ultrapure, sticky or dirty LU81/83/84: 2” NPT (2” G) liquids, and is broadly selected for inches, centimeters and percent- Mount gasket: Viton® ages Classification: General purpose bulk storage, day tank, lift station and Compliance: CE, RoHS process tank level applications. • Narrow 2” or 3” beam width for applications with limited mea- User Friendly surement space

Configuration is fast and simple with • Fail-safe intelligence and di- the scrolling single layer menu, 3-but- agnostic feedback for simple ton interface and 6-segment LCD troubleshooting display. Troubleshooting is easy with our powerful setup and diagnostic modes. Setup displays the trans- • PVDF transducer and NEMA 4X mitter’s calibration set points and polycarbonate enclosure for cor- diagnostics provides users with a rosive liquids snapshot of the installed sensor performance in the application. • Automatic temperature compensation for accurate measurement

36 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Non-Contact Measurement with Display Bulk Tank

Configuration

DISPLAY

SELECT / FAST TOP MENU Button

UNITS TANK SAFE TGCAL VALUES HELP RUN

7RDFWLYDWHWKHWRS PHQXSUHVVDQG KROG6(/(&7)$67 SELECT SELECT SELECT SELECT SELECT SELECT EXWWRQIRUVHFRQGV Display Units 4-20 Span Fail-Safety Target-Cal Diagnostics Help

Inches Height (4 mA) 22 mA Full Setup Contact Feet Fill H (20 mA) 21 mA Empty Diagnostics Centimeters Reverse mA 20 mA Help Reset Meters Help 4 mA Percentage Hold

Dimensions

LU80 Side View Top View LU81/83/84 Side View

PP PP 2 (133 mm) PP (1 mm) PP 3 (62 mm) (4 mm)

1.25" PP 1" 137 2.4" 1 (32 mm) (1" ) PP

* PP PP

EchoSpan

Ordering Notes LU8 -51 1 1) Install the level sensor using Flowline Sensor range installation fittings or equivalents. 0 3m (9.8’) 1 5.5m (18.0') 3 8m (26.2') 4 10m (32.8') Process mount (1) IP 65 0 NPT (US) LM50-1001 6 G (Metric)

Email Us | [email protected] 37 We Do Your Level Best Bulk Tank DeltaSpan™TM External Pressure Level Transmitter

Specifications

Range: -S0X1: 0 to 5 psi (0.34 bar), 0 to 11’ (0 to 3.4m) wc -S2X1: 0 to 15 psi (1 bar), 0 to 34’ (0 to 10.4m) wc -S4X1: 0 to 30 psi (2 bar), LD30-S011 0 to 69’ (0 to 21.1m) wc Accuracy: ± 0.25% of full scale Configuration: None, fixed span Application Supply voltage: 13-30 VDC Loop resist.: 1300 Ohms max. The general purpose external pressure level Signal output: 4-20 mA, two-wire Process temp.: F: 0° to 200° transmitter is offered in two styles of termination C: -18° to 93° and provides continuous level measurement up to Temp. comp.: F: 0° to 175° 69’ (21m) of water column with a 4-20 mA signal C: -18 to 79° output. Select the -S_01 level sensor for cable Proof pressure: 2 x full span Enclosure rating: NEMA 4X (IP66) termination or the -S_11 level sensor for conduit Enclosure mat.: 316 SS termination with an integral junction box. This liquid Termination: -SX1: Cable level sensor is well suited for clean liquid or gas -SX11: Junction box with 1/2” NPT conduit media. Applications include cutting oil and air. Cable type: -SX01: 2-cond., shielded Cable length: -SX01: 9’ (2.7m) LD30-S001001 Cable material: -SX1 : Polyurethane Features Process mount: 1/4” NPT Trans. material: 316 SS Classification: General purpose • Corrosion resistant 316 SS transducer with threaded mount Compliance: CE

• Available with polyurethane cable or junction box termination

Automatic temperature compensation for accurate measurement -S_11 Side View

137 PP PP 5HG %ODFN PP 6KLHOG PP -S_01 137 PP PP PP 137 PP

-S_11 Top View PP PP

DeltaSpan

Ordering Notes LD30-S 1 1) For level sensor power, order the LC95-1001 AC-DC power supply. Sensor range 0 5 psi (0.34 bar) / 11’ (3.4m) wc 2 15 psi (1.0 bar) / 34’ (10.4m) wc 4 30 psi (2.0 bar) / 69’ (21.1m) wc Termination (1) LC95-1001 0 Cable 1 Junction box

38 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best DeltaSpan™ Submersible Pressure Level Transmitter Bulk Tank

Application Specifications

The general purpose submersible pressure Range: -SX01: 0 to 5 psi (0.34 bar), level transmitter is offered in three styles 0 to 11’ (0 to 3.4m) wc for different liquid types and provides -SX11: 0 to 10 psi (0.69 bar), continuous level measurement up to 46’ 0 to 23’ (0 to 7m) wc -SX21: 0 to 15 psi (1.0 bar), (14m) of water column with a 4-20 mA 0 to 34’ (0 to 10.4m) wc signal output. Select the LD31 liquid level -SX31: 0 to 20 psi (1.38 bar), sensor for relatively clean water, light 0 to 46’ (0 to 14m) wc Accuracy: ± 0.25% of full scale weight oil or diluted chemical. Application Configuration: None, fixed span examples include water wells and ponds. Supply voltage: 13 to 30 VDC Select the LD32 liquid level sensor for dirty, Loop resist.: 900 Ohms foaming or slurry type liquids. Application Signal output: 4-20 mA, two-wire Process temp.: LD31: F: 0° to 150° examples include industrial pump lift C: -18° to 66° stations. The LD34 miniature submersible LD32: F: 0° to 200° level transmitter is only 0.63˝ in diameter C: -18° to 93° making it ideal for level monitoring in well LD34: F: -4° to 176° C: -20° to 80° and borehole applications. Temp. comp.: LD31: F: 0 to 140° C: -18 to 60° LD31-S101 LD32: F: 0° to 180° C: -18 to 82° Features LD34: F: 32° to 158° C: 0 to 70° Corrosion resistant 316 SS transducer Proof pressure: 2 x full scale with polyurethane or ETFE cable Trans. material: LD31: 316 SS, 316L SS, Buna-N & PVC Strong cable design with maintenance LD32: 316 SS, 316L SS, Buna-N free breather tube and vent filter LD34: 316 SS Trans. thread: 1/2” NPT Enhanced LD32 has rugged clog and Cable type: 2-conductor, shielded damage resistant diaphragm design with vent tube LD32-S101 Cable length: -SX01 & SX11: 40’ (12.2m) -SX21 & SX31: 60’ (18.3m) Automatic temperature compensation for Cable material: -S1X1: Polyurethane -S2X1: ETFE accurate measurement PP Classification: General purpose LD32 Compliance: CE

Shld Vent (Clear) Black (-) LD31 PP 137 Red (+) 5HG %ODFN 137 PP &OHDU 9HQW 6KOG PP DeltaSpan PP

Ordering Notes LD3 -S 1 1) To install the level sensor through the tank top with a compact junction box, 2" mounting plug Liquid type (1) (2) and cable connector, order the LD90-1001 1 Water & light oil pressure sensor mounting kit. 2 Wastewater & slurry 2) LD34 available only in the -S1X1 configuration. 4 Down-well water applications Cable jacket 1 Polyurethane 2 ETFE Sensor range 0 5 psi (0.34 bar) / 11’ (3.4m) wc 1 10 psi (0.69 bar) / 23’ (7m) wc LD90-1001 2 15 psi (1.0 bar) / 34’ (10.4m) wc 3 20 psi (1.38 bar) / 46’ (14m) wc

Email Us | [email protected] 39 We Do Your Level Best Bulk Tank EchoTouch™TM 3-Wire Ultrasonic Level Transmitter

Application Specifications The general purpose 3-wire ultrasonic Range: 6” to 24.5’ (15cm to 7.4m) level transmitter provides continuous Accuracy: ±0.25% of range level measurement up to 24.5’ (7.4m) Resolution: 0.125” (3mm) with a 4-20 mA signal output, and is Dead band: 6” (15cm) Beam width: 8° conical configured via the integral push button Configuration: Push button display module. The level sensor has Memory: Non-volatile one 10A relay which can be configured Display type: LED, 4-digit Display units: Inch or cm on a single set point (high level alarm LED indication: Relay status or low level alarm) or latched on two set Supply voltage: 14-36 VDC points for automatic fill or empty with Consumption: 200mA max. fail-safe logic. This non-contact liquid Signal output: 4-20 mA, three-wire Signal invert: 4-20 mA, 20-4 mA level sensor is well suited for corrosive, Current flow: Sourcing or sinking ultrapure, sticky or dirty liquids, and is Contact type: (1) SPDT relay, latching widely selected for bulk storage and day Contact rating: 250 VAC @ 10A Contact logic: Single point: alarm tank level applications. LU30-5003 Two point: latching Contact fail-safe: Reverts to safe state during echo-loss Features Process temp.: F: -20° to 140°, C: -4° to 60° Temp. comp.: Automatic Ambient temp.: F: -40° to 140°, C: -40° to 60° • Level measurement up to 24.5’ Pressure: 30 psi (2 bar) @25° C (7.4m) with 1 programmable relay derated @1.667 psi (.113 bar) per °C above 25° C Enclosure rating: NEMA 4X (IP65) • Conﬁguration is simple via integral Encl. material: PP, UL94VO push button display module Conduit entrance: Single, 1/2” NPT Cable length: 9” (22cm) Cable type: Power & signal: 3-conductor • LED digital display indicates level Relay: 3-conductor in inches or centimeters Cable jacket mat: Vinyl Trans. material: PVDF • Process mount: 2” NPT (2” G) Programmable relay for alarm or Mount gasket: Viton® automatic ﬁll-empty control Classification: General purpose Compliance: CE • Polypropylene enclosure rated NEMA 4X with rugged PVDF transducer

9" Cable (22 cm) LC95-1001 EchoTouch

Ordering Notes LU30-50 1) Install the level sensor using Flowline installation fittings or equivalents. Process mount (1) 2) The three-wire level sensor is offered with 0 NPT (US) sourcing and sinking signal outputs. Sourcing 6 G (Metric) uses the negative of the power supply as common, Signal output (2) (3) (4) and provides internal excitation for use with 3 4-20 mA, sourcing sinking devices. Sinking uses the positive of the 4 4-20 mA, sinking power supply as common, and requires external excitation for use with sourcing devices. 3) For level sensor power, order the LC95-1001 AC-DC power supply. 4) To special order cable, place the cable length (feet/m) IP 65 at the end of the part number (i.e.: LU30-5003S-10'). Add $16 per foot of cable.

40 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best FloaTek™ Float Level Transmitter Bulk Tank

Application Specifications

The general purpose float level transmitter Range: 12” to 6.5’ (30cm to 2m) provides continuous level measurement up to Accuracy: 0.25% span in water 6.5’ (2m) with a 4-20 mA signal output, and is Configuration: None, fixed span Orientation: ± 20° from vertical factory configured to your selected dimension. Specific gravity: 0.55 minimum This stainless steel liquid level sensor is well Supply voltage: 10 to 30 VDC suited for high temperature or pressure tank level Loop resist.: 600 Ohms @ 24 VDC Signal output: 4-20 mA, two-wire applications with relatively clean liquids such as Process temp.: F: -40° to 185° water, diluted chemicals and light weight oils. C: -40° to 85° Application examples include boilers and process Ambient temp.: F: -40° to 140° vessels. C: -40° to 60° Pressure: 200 psi (13.8 bar) LV55-S001 Enclosure rating: NEMA 4X (IP65) Enclosure mat.: PP, UL94VO Features Conduit entrance: Single, 1/2” NPT Process mount: 2” NPT Guide-float mat: 316 SS High pressure or temperature level Classification: General purpose measurement up to 6.5’ (2m) Compliance: CE

Rugged 316 stainless steel float guide and process mounting plug Tech Tip Assembled to your guide length and measurement span dimensions For level indication and control, package Polypropylene junction box rated NEMA your float transmitter 4X with conduit port and terminal strip with the DataView level controller. See page 43 for details.

Junction Box 'LD PP 137 PP PP

'HDG=RQH 'HDG=RQH P$ P$ PP PP PP PP $ 6SHFLI\ PP FloaTek

Ordering Notes LV55-S001- 1) Specify the A-dimension at the end of the part number. The level sensor is offered in six standard Dimensions (1) (2) guide lengths from 16" to 48" (41cm to 122cm). A Specify The 20 mA set point is placed at 0.75" (19mm) 16” (41cm) below the mounting plug, and the 4 mA set point 24” (61cm) is placed at 1.9" (48mm) above the guide stop. 32” (81cm) 36” (91cm) The space above and below these set points are 42” (107cm) dead zones. LM50-1001 IP 2) Custom guide lengths may be specified in 1/2" 48” (122cm) 65 (1.3cm) increments from 12" to 78" (30cm to 2m). To calculate the custom guide length adder, round up the A-dimension to the next inch (2.5cm), multiply it by $11 per inch (2.5cm), and add that Orders for this custom built product are non-cancellable and/or non-returnable sum to the custom price.

Email Us | [email protected] 41 We Do Your Level Best Bulk Tank TM DataLoop™ Level Indicator

Specifications

Display type: LCD, 5-digit Display units: Engineering Display output: -9999 to 99999 Display height: 0.6” (15mm) Decimal point: Floating Backlight: LED, orange Configuration: Push button Memory: Non-volatile Sensor input: (1) 4-20 mA transmitter Loop power: 12-30 VDC Voltage drop: 2.0 VDC w/o backlight LI25-1001 5.7 VDC w/backlight Ambient temp.: F: -22° to 149° C: -30° to 65° Enclosure type: 1/8 DIN, panel mount Application Features Enclosure rating: NEMA 4X (IP65) faceplate Enclosure mat’l: Polycarbonate The general purpose loop powered Easy configuration via the Classification: General purpose level indicator displays engineering push button display module Compliance: CE units connected in series with one 4-20 mA continuous level transmit- LCD main display with second- Side View ter. For field mount installation, add ary unit and bar graph display 1.76" a single or two indicator NEMA box. (45 mm) DIN enclosure with NEMA 4X faceplate and shallow case

24 Linear, square root and pro- ( 2 mm) grammable exponent functions

Non-volatile memory with 3.2" 0.59" (81 mm) Shown with security password protection (15 mm) 3.6" LM91-1001 (91 mm) Windowed NEMA box acces- Top View Tech Tip sory for field installations For field mount installation in a NEMA 4X, corrosion resistant polycarbonate enclosure, order the 2.5" appropriate single or two indicator Shown with (64 mm) box. Each enclosure comes with LM93-1001 precut panels and mounting hard- 3.61" ware. It's indication made simple. (92 mm)

4.68" (119 mm) DataLoop

Ordering Notes LI25-1001(1) (2) 1) For field mount installation in a NEMA 4X polycarbonate box, order the LM91-1001 (single indicator, non-windowed) or LM91-2001 (two indicator, non-windowed); or LM92-1001 (single indicator, windowed) or LM93-1001 (two indicator, windowed) enclosure. 2) For battery powered level indication, order the LI25-1001-BO. Powered by two 9V batteries, the IP 65 indicator comes pre-mounted in a LM92-1001 windowed NEMA box.

42 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best DataView™ Level Controller Bulk Tank

Specifications

Display type: LED, 6-digit Display units: Engineering Display output: -99999 to 999999 Display height: Main: 0.6” (15mm) high Secondary: 0.46” (12mm) Decimal point: Floating LED indication: Relay status Expansion Configuration: Push button Card Memory: Non-volatile Linearization: 2-32 point function LI55-1001 Sensor input: (1) 4-20 mA or 0-10 VDC Supply voltage: 85-265 VAC @ 50-60 Hz. Consumption: 15 watts max. Sensor supply: 24 VDC ± 5% @ 200 mA Application Features Repeater output: 4-20 mA, 24 VDC ± 5% @ 40 mA supply The general purpose level controller LED main display and secondary Contact type: -12_1: (2) SPDT relays displays engineering units with one unit display with relay status -14_1: (4) SPDT relays Contact rating: 3A @ 30 VDC and 250 VAC 4-20 mA or 0-10 VDC continuous resistive load level sensor input and is offered in Easy configuration via the push Ambient temp.: F: -40° to 149° three configurations with optional 2 button display module C: -40° to 65° or 4 programmable relays, and an Enclosure type: 1/8 DIN, panel mount Enclosure rating: NEMA 4X (IP65) faceplate isolated 4-20 mA repeater. Each DIN enclosure with NEMA 4X Enclosure mat.: Polycarbonate relay can be configured on a single faceplate and shallow case Classification: General purpose set point (high level alarm or low Compliance: CE Approvals: UL, cUL listed, E160849, 508 level alarm) or latched on two set Isolated power supply to sensor industrial control equipment points for automatic fill or empty with 4-20 mA repeater output in simplex (one pump or valve) or duplex (two pumps) level control Non-volatile memory with secu- modes. rity password protection Tech Tip

32-point linearization function for For field mount installa- volumetric measurement tion in a NEMA 4X, corrosion resistant polycar- 1.76" (45 mm) bonate enclosure, order

4.17" the appropriate single (106 mm) or two indicator box.

24 Each enclosure comes 3.61" ( 2 mm) (92 mm) with precut panels and Shown with mounting hardware. It’s LM93-1001 4.68" (119 mm) indication and control 4.77" 0.59" (121 mm) made simple. (15 mm) 5.05" (128 mm) DataView

Ordering Notes LI55- 1 1) For field mount installation in a NEMA 4X polycarbonate enclosure, order the LM92-1001 Supply voltage (single indicator box) or the LM93-1001 (two 1 85-265 VAC indicator box). 8 12-24 VDC 2) See page 84 for controller expansion cards. Configuration (1) (2) 0 Meter only 2 Meter with 2 relays 4 Meter with 4 relays

Repeater configuration IP 0 No repeater 65 1 4-20 mA repeater

43 www.flowline.com Email UsFax: | [email protected] 43 We Do Your Level Best We Do Your Level Best Bulk Tank Commander™TM Multi-Tank Level Controller

Features Specifications

Multi-tank controller with three Display type: LCD, graphic run mode configurations Display pixels: 128 x 64 Display units: Engineering Display output: 0 to 999999 Easy configuration via the push LCD indication: Relay status button display module Configuration: Push button Backlight: Yes Memory: Non-volatile Graphic LCD display indicates Opt. memory: MicroSD card channel span and relay status Linearization: Tank shapes Sensor inputs: -1001: (4) 4-20 mA DIN enclosure with NEMA 4X -2001: (2) 4-20 mA Supply voltage: 10-30 VDC faceplate and shallow case Contact type: -1001: 6 SPST relays -2001: No relays LI90-1001 Easy data logging and retrieval Consumption: 130 mA @ 24 VDC Contact rating: 3A @ 30 VDC or 250 VAC via optional MicroSD card resistance load (-1001 only) Repeater output: (2) 4-20 mA, 24 VDC Application Simulation mode for configura- (-2001 only) tion testing and troubleshooting Ambient temp.: F: 32° to 122° The general purpose level controller C: 0° to 50° displays engineering units with four Enclosure type: 1/4 DIN, panel mount 4-20 mA continuous level sensor inputs with 35mm DIN rail Enclosure rating: NEMA 4X (IP65) faceplate and 6 programmable relays. Select MicroSD Card Enclosure mat.: Polycarbonate from one of three run configurations: Classification: General purpose Compliance: CE 1) Multi-tank with 4 level sensor inputs Approvals: cULus and 4 relays 2) Pump control with 1 level sensor Tech Tip input and 6 relays for lift stations Package the Commander with our external power in simplex (one pump) or duplex (two supply rated 24 VDC @ 0.6A. The rail mount pumps) level control modes power supply supports all Flowline transmitters 3) Differential level with 2 level sensor used with the controller. LC95-1001 inputs and 4 relays for municipal screen or rake control Top View Side View Relays can be configured on a single set point (high level alarm or low level alarm) or latched on two set points for automatic fill or empty pump or valve control with selectable time delay. The graphic LCD display indicates span and relay status for each input channel. An optional MicroSD card enables data- logging storage and retrieval.

Commander

Ordering Notes LI90- 001 1) Optional MicroSD cards can be purchased separately from electronic retailers. Sensor inputs / outputs (1) (2) 2) For external loop power, order the LC95-1001 1 4 inputs / 6 relays (120-240 VAC) power supply (24 VDC @ 0.6A). 2 2 inputs / 2 repeaters

44 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best DataPoint™ Level Controller Bulk Tank

Specifications

Display type: LED, 3.5 digit Display units: Engineering Display output: 0 to 999 LED indication: Relay status Configuration: Push button Alarm indication: Amber: < 4mA Red: > 20 mA Sensor input: (1) 4-20 mA Supply voltage: Selectable 120 / 240 VAC 50-60 Hz. LC52-1001 Sensor supply: 24 VDC @ 1.5 watts Loop power: 4-20 mA, 18 VDC Consumption: 5 watts maximum Contact type: (2) SPDT relays (one latching) Contact rating: 250 VAC @ 10A Application Features Contact output: Selectable NO / NC Contact latch: Selectable ON / OFF Contact delay: 0-60 seconds The general purpose controller • 3.5 digit LED display indicates Repeater output: 4-20 mA, 12-36 VDC provides single tank level level in custom engineering units Ambient temp.: F: -40° to 158° indication with 2 relays, 1-3 set C: -40° to 70° points and an isolated analog Enclosure type: 35mm DIN rail (EN 50 022) Fail-safe relay control of pumps Enclosure mat.: PP, UL94VO repeater. Relay 1 is configurable or valves with 0-60 second delay Classification: General purpose on a single set point. Relay 2 Compliance: CE can be configured on a single set • Easy set up with push button point or latched on two set points calibration for span, display and for automatic fill or empty control. relay set points Side View Package the controller with any of 3.6" (92mm) our level transmitters. The NEMA • 35 mm DIN rail mount 3.1" (79mm) 4X polycarbonate enclosure is polypropylene enclosure with a great choice for field mount removable terminal strips installations and comes complete with a DIN rail mounting kit. • Invert switch changes relay state 35mm from NO to NC without rewiring DIN Rail Tech Tip For field mount installation in a Top View NEMA 4X windowed enclosure polycarbonate box, order the ap- 3.9" (98mm) propriate single or two controller enclosure. All necessary mount- RELAY 1 RELAY 2 ing hardware is included. POWER LATCH ON OFF INVERT INVERT DELAY DELAY 1.8" 2.7"

EASY CAL (44mm) (68mm)

OFF SET SPAN RLY1 RLY2A RLY2B 420OP

LM94-1001 UP DOWN SET 0%INPUT 100%

DataPoint

Ordering Notes (1) LC52-1001 1) For field mount installation in a NEMA 4X windowed polycarbonate box, order the LM94-1001 (single controller) or LM95-1001 (two controller) enclosure.

45 www.flowline.com Email UsFax: | [email protected] 45 We Do Your Level Best We Do Your Level Best Level Switch IntroductionTM to Level Switch Solutions

Level Detection, Switching & Control Level switches detect a change in state from dry or wet at specific points within the tank and correspondingly invert contacts to signal an alarm or control a pump or valve. Flowline level switches are offered in multi-point and single-point packages, as well as single-point sensor configurations. Multi-point packages are available in non-contact and contact types for installation through the top wall of the tank. Single-point packages are available for installation through the top or side wall of the tank. Single-point sensors have small relay or reed contacts, and depending upon the type, may be installed in the tank or threaded through the tank wall. Select the appropriate level switch type based upon your application liquid, control and installation requirements. For hazardous locations, select an intrinsically safe configuration.

Intrinsically Safe The approach behind intrinsically safe equipment is to limit the electrical and thermal energy available to and generated by devices within the hazardous location. Therefore, intrinsically safe sensors are inherently low voltage designs that cannot cause sparks or ignition. Additionally, the power and signal wires of these sensors are protected by Zener safety barriers which limits their voltage and current.

Multi-Point Packages Single-Point Packages

Non-Contact Contact

EchoSwitch® II Smart Trak™ Float-Point™ Switch-Pak™ Switch-Pro™

LU7X AX23 AXXX AVX6AVX6 AV17 AX13 AX1X AX13 AX1X Pages 48-49 Pages 50-51 Pages 52-53 Pages 54-55 Page 62 Pages 56-57 Pages 58-59 Page 60 Page 61

EchoSwitch Smart TrakFloat-Point Switch-Pak Switch-Pro LU7X AX23 AXXX AVX6 AV17 AX13 AX1X AX13 AX1X Sensors + Sensor + Sensor + Sensor + Sensor + Type Ultrasonic Sensors + Junction Box Sensor + Alarm Controller Controller Junction Box Controller Junction Box Class GP Install Top Wall Side Wall Range 26.2' (8m)10' (3m) 6.5' (2m) - - - 10' (3m) - - - Auto Fill or Empty, High & Auto Fill or Auto Fill or Empty, High & Low Function High & Low Alarm High & Low Alarm Low Alarm, Empty Alarm Duplexing Relay(s) (3) SPDT (1) SPDT (1-4) SPST (1-5) SPST - - - (1) SPDT (1) SPST (1) SPDT (1) SPST Points - - - Adjustable Factory

Voltage 95-250 VAC 120-240 VAC 12-36 VDC 240 VAC/VDC 9V Battery 120-240 VAC 12-36 VAC 120-240 VAC 12-36 VDC

Temperature 140˚F (60˚C)176˚F (80˚C) 392˚F (200˚C) 302˚F (150˚C) 176˚F (80˚C) 200 PSI 250 PSI Pressure 30 PSI (2 bar) Atmospheric 150 PSI (10 bar) (13.8 bar) (17.2 bar) Material PVDF PP, Ryton ® 316 SS PP, Ryton ® , PFA

46 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Detection, Switching & Control Level Switch

Single-Point Sensors

Ultrasonic Vibration BuoyancyOptic Leak Capacitance Mini-Float High-Temp Float Mini & High-Temp Float Float Leak

LU10 LZ12 LV10 LO10LP15 LP50 LV20 LV35/36 LV25/35 LH29 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Pages 69-70 Page 71

Switch-Tek

LU10 LZ12 LV10 LO10 LP15 LP50 LV20 LH25 LV35/36 LH35 LH29

Type Ultrasonic Vibration Buoyancy Optic Capacitance Float

Class IS GP

Media Chemical Wastewater Water Various Coating Conductive Water Various

Install UniversalTop Wall Universal Non-intrusive Top Wall Side Wall Top Wall Side Wall Bottom Wall

Function High or Low Alarm Leak High or Low Alarm Leak

Relay (1) SPST (1) SPDT (1) SPST

Voltage 12-36 VDC120 VAC/VDC 12-36 VDC 120 VAC/VDC

Temperature 176˚F (80˚C)194˚F (90˚C) 176˚F (80˚C) 149˚F (65˚C) 392˚F (200˚C) 221˚F (105˚C)

Pressure 150 PSI (10 bar)25 PSI (2 bar) 150 PSI (10 bar)- - - 10 PSI (0.7 bar) 500 PSI (34 bar) 50 PSI (3.5 bar)

Material PP, PFA Ryton ® PP, PVDF PP, PFA PP PSO PP, PVDF 316 SS Valox 420

Relay Controllers

Compact Remote

LC1X LC0X LC4X LC9X Page 74 Page 75 Page 73 Page 73

Switch-Pro LC1X LC0X LC4X LC9X Type Controller Junction Box Controller Class GP IS Input (1-2) Switch (1-4) Switch (1-3) Switch Relay(s) (1) SPDT - - - (1-2) SPDT Strobe Alarm Optional - - - Supply 120-240 VAC - - - 120-240 VAC

Auto Fill or Empty, Function - - - Auto Fill or Empty, High & Low Alarm High & Low Alarm Enclosure NEMA 4X - - -

47 www.flowline.com Email UsFax: | [email protected] 47 We Do Your Level Best We Do Your Level Best Level Switch EchoSwitchTM ® II Ultrasonic Level Switch & Controller

Specifications

Range: LU77: 4” to 9.8’ (10cm to 3m) LU74: 8” to 18.0’ (20cm to 5.5m) LU78: 8” to 26.2’ LU78-5005 (20cm to 8m) Repeatability: 0.25” (6.35mm) Dead band: LU77: 4” (10cm) LU74/78: 8” (20cm) Beam width: LU77: 2” (5cm) LU74/78: 3” (7.6cm) Configuration: Push button Memory: Non-volatile Display type: LCD, 6-digit Display units: Inch, cm, percent, feet or meter Supply voltage: LU7_-50_5: 95-250 VAC Power: 20 watts @ 120 VAC Contact type: (3) SPDT relays Faceplate Contact rating: 60 VA, 1A maximum Contact fail-safe: Open, close or hold last Process temp.: F: -4° to 140° C: -20° to 60° Temp. comp.: Automatic Ambient temp.: F: -40° to 160° LU77-5005 C: -40° to 71° Pressure: MWP = 30 PSI (2 bar) Enclosure rating: NEMA 4X (IP65) Encl. material: Polycarbonate Encl. hardware: Brass & stainless Application Features Enclosure vent: Water tight membrane Trans. material: PVDF The general purpose ultrasonic Offered in 3 level detection ranges Conduit entrance: Dual, 1/2” NPT level sensor provides continu- from 9.8’ (3m) to 26.2’ (8m) Process mount: LU77: 1” NPT (1” G) ous level detection up to 26.2’ LU74/78: 2” NPT (2” G) Mount gasket: Viton® (8m) with 3 programmable re- Configuration is simple via integral Classification: General purpose lays for level switch or level push button display module Compliance: CE, RoHS control functions, and is configured via the integral push but- Three programmable relays for ton display module. Each relay switch, pump control and fail-safety can be configured on a single set point (high level alarm or • 1 pump or valve with 2 alarms low level alarm) or latched on • 2 pumps (lead-lag) with 1 alarm two set points for automatic fill • 2 pumps (duplexing) with 1 alarm or empty in simplex (one pump • 3 independent switch point alarms or valve), duplex (two pumps) or LCD display indicates level height in triplex (three pumps) level con- engineering units and relay status trol modes with selectable time delay and fail-safe logic. The Narrow 2” or 3” beam width for applica- embedded level controller can Automation tions with limited measurement space lower cost by replacing external The integral three channel control- control hardware. This non-con- Short 4” or 8” dead band maximizes the ler has powerful automation features tact liquid level sensor is ideally measurable filling capacity of the tank including advanced pump and alarm suited for corrosive, sticky or control logic designed for day tank, dirty liquids, and is broadly se- PVDF transducer and NEMA 4X poly- process vessel and waste sump appli- lected for pump lift station, sump carbonate enclosure for corrosive liquids cations. From alarms to automatic fill and day tank level applications. or empty, pump duplexing and run dry Automatic temperature compensation protection, EchoSwitch II does it all. for accurate measurement It's level made simple.

48 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Non-Contact Multi-Point Level Control Level Switch

Configuration

DISPLAY

SELECT / FAST TOP MENU Button

UNITS TANK RELAY# SAFE MPLEX HELP RUN

7RDFWLYDWHWKHWRS PHQXSUHVVDQG KROG6(/(&7)$67 SELECT SELECT SELECT SELECT SELECT SELECT EXWWRQIRUVHFRQGV Display Units Range Relay Action Safe Mode Multi-Plexing Settings

Inches Height Pump R1 (Relay 1) No-Alt Setup Feet Fill H Valve R2 (Relay 2) Duplex Reset Centimeters Alarm R3 (Relay 3) A-Time Sim-T Meters Test P Percent

Dimensions

LU74/78 Side View

PP LU77 Side View

2 (133 mm) PP

137 (1 mm) * PP PP 3 (62 mm) (4 mm) PP

1.25" 1" (1" ) 2.4" 1 (32 mm)

IP 65 ,JOV:^P[JO

Ordering Notes LU7 -50 5 1) Install the level switch using Flowline installation fittings or equivalents. Sensor range / size 7 3m (9.8’) 4 5.5m (18.0’) 8 8m (26.2’) + Process mount (1) 0 NPT (US) 6 G (metric) LM50-1001 for LU74/78 LM50-1001-1 for LU77

49 www.flowline.com Email UsFax: | [email protected] 49 We Do Your Level Best We Do Your Level Best Level Switch Smart TMTrak™ with Compact Level Controller

Application Specifications The general purpose level switch package Length: 8” to 10’ (20cm to 3m) provides automatic tank ﬁlling or emptying up Accuracy: ± 1mm in water to 10’ (3m) between two adjustable level switch Repeatability: ± 0.5mm in water points. The compact level controller with optional Orientation: ± 20° vertical Switch points: 2 (field adjustable) strobe provides one latching 16A relay for pump LED indication: Power, relay & sensor or valve control. Offered in three level sensor Supply voltage: 120 / 240 VAC @ 50-60 Hz technologies, select the type based upon your Consumption: 0.25A maximum Strobe type: -431X: N/A application media. This polypropylene liquid -432X: Xenon tube level switch package is widely selected for Strobe flash: -431X: N/A sump, process and day tank level applications. -432X: 1 per second Contact type: (1) SPDT relay, latching Contact rating: 250 VAC @ 10A Contact output: Selectable NO / NC Features Contact delay: 0-60 seconds Contact latch: Selectable ON / OFF • Fail-safe relay control of pumps or valves Process temp.: F: -40° to 176° with 0-60 second delay C: -40° to 80° Ambient temp.: F: -40° to 140° C: -40° to 60° • Offered in 3 sensing technologies for Pressure: Atmospheric broad application coverage: ultrasonic, Enclosure rating: NEMA 4X (IP65) vibration & buoyancy Enclosure mat.: -432X: PP, UL94VO & PC -431X: PP, UL94VO Conduit entrance: 1/2” NPT • Easy setup with LED indicators for Wetted material: PP (glass fill) sensor, power and relay status Process mount: 2” NPT (2” G) Classification: General purpose Compliance: CE • Rugged polypropylene construction for use in corrosive liquid environments

• Adjustable level switch cars enable sensor adjustment in the ﬁeld

• Invert switch changes relay state from NO to NC without rewiring

AV23-4313

Relay Control The AC powered relay controller has a latching 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. The rugged NEMA 4X enclosure is made of UL approved fire retardant polypropylene and features a 300° swivel base for easy Controller conduit alignment.

50 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Adjustable Automatic Fill or Empty Level Control Level Switch

Sensors

Vibration Ultrasonic Buoyancy • Applied in wastewater with light • Broadly applied in chemicals • Applied in clean water and coating or scaling and light weight oils non-coating chemicals

• Available in Ryton® • Available in PP or PFA • Available in PP or PVDF

Dimensions

AV23-4323 & 6SHFLI\ PP

137 * PP % 6SHFLI\ PP $ 6SHFLI\

Strobe Alert The controller with Strobe Alert configuration flashes when the relay is energized to bring attention to process conditions such as the automatic emptying of waste into treatment.

IP 65 Smart Trak

Ordering Notes A 23-43 - - - 1) Select the best sensor technology based upon your application. Sensor technology (1) 2) Specify the A, B, C dimensions at the end of Z Vibration the part number (ie: AZ23-4343-87"-76"-17"). U Ultrasonic The dimensions may be specified in 1/2" (1.3cm) V Buoyancy increments. The track length or A-dimension Configuration may be specified from 12" to 10' (20cm to 3m). 1 Controller only The sensor or B and C dimensions may be 2 Controller with Strobe Alert specified from 4" to 10' (10cm to 3m). For Process mount maximum field adjustability, specify all sensor 3 NPT (US) dimensions equal to the A-dimension. 7 G (Metric) Dimensions (2) (3) 3) To calculate the track length adder, round up A Specify the A-dimension to the next foot (30 cm) and B Specify add $20 per foot (30cm) to the price. C Specify

51 www.flowline.com Email UsFax: | [email protected] 51 We Do Your Level Best We Do Your Level Best Level Switch SmartTM Trak™ with Compact Junction Box

Application Specifications

The general purpose level switch package pro- Length: 8” to 10’ (20cm to 3m) vides reliable, multi-point liquid level detection up Accuracy: ± 1mm in water to 10’ (3m) with 1-4 adjustable level switch points Repeatability: ± 0.5mm in water and a compact junction box for integral wiring Orientation: ± 20° vertical termination. Available in three level sensor tech- Switch points: 1-4 (field adjustable) Supply voltage: AVX6: N/A nologies, select the sensor type based upon your AUX8: 12-36 VDC application media. This PP liquid level switch AZX8: 12-30 VDC package is widely applied in process, sump and Consumption: AVX6: N/A day tank level applications for automatic ﬁlling or AUX8 / AZX8: 100 mA max emptying with high level alarm and/or low level Contact type: AVX6: SPDT reed(s) AUX8 / AZX8: SPST relays alarm. Contact rating: AVX6: 15 VA, 0.25A max. AUX8 / AZX8: 60 VA, 1A max. Contact output: Selectable NO / NC Process temp.: F: -40° to 176° Features C: -40° to 80° AU35-4343 Ambient temp.: F: -40° to 140° C: -40° to 60° Rugged polypropylene multi-point level Pressure: Atmospheric switch package for corrosive liquids Enclosure rating: NEMA 4X (IP65) Enclosure mat.: PP, UL94VO Terminal strip: 12-pole, socket 60VA relay or 15VA dry contact selectable Conduit entrance: 1/2” NPT NO or NC via wiring Wetted material: PP (glass fill) Process mount: 2” NPT (2” G) Classification: General purpose Offered in 3 sensing technologies for Compliance: CE broad application coverage: ultrasonic, vibration & buoyancy

Adjustable level switch cars enable sensor Junction Box adjustment in the field The compact junction box is constructed of Polypropylene enclosure rated NEMA 4X UL approved fire retardant polypropylene with swivel base and terminal strip and comes pre-wired with a 12-pole terminal strip.

Junction Box

Relay Control For process automation, package your switch assembly with our remote relay controllers. See page 73 for more details.

LC40-1001

52 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Adjustable Multi-Point Level Detection Level Switch

Sensors

Vibration Ultrasonic Buoyancy • Applied in wastewater with light • Broadly applied in chemicals • Applied in clean water and coating or scaling and light weight oils non-coating chemicals

• Available in Ryton® • Available in PP or PFA • Available in PP or PVDF

Dimensions B (Specify) E (Specify) AU45-4343 2.8" (71mm)

2" NPT (2" G) 4.2"(106mm) D (Specify) 5.7"(145mm) C (Specify) A (Specify)

IP 65 Smart Trak

Ordering Notes A -434 - - - - - 1) Select the best sensor technology based upon your application. 2) Available only in the following Sensor technology (1) configurations: Z Vibration Vibration = AZ_8 U Ultrasonic Ultrasonic = AU_8 V Buoyancy Buoyancy = AV_6 Number of sensors 3) Specify the applicable A, B, C, D, E 1 One sensor - add 1 x ST dimensions at the end of the part 2 Two sensors - add 2 x ST number (ie: AZ28-4343-87"-76"-17"). 3 Three sensors - add 3 x ST The dimensions may be specified in 4 Four sensors - add 4 x ST Contacts (2) 1/2" (1.3 cm) increments. The track 6 SPDT reed length or A-dimension may be 8 SPST relay specified from 12" to 10' (20cm to 3m). Process mount The sensor or B, C, D, E dimensions 3 NPT (US) may be specified from 4" to 10' (10cm 7 G (Metric) to 3m). For maximum field adjustability, Dimensions (3) (4) specify all sensor dimensions equal to A Specify the A-dimension. B Specify C Specify (if applicable) 4) To calculate the track length adder, D Specify (if applicable) round up the A-dimension to the E Specify (if applicable) next foot (30cm) and add $20 per LM50-1001 foot (30cm) to the price.

53 www.flowline.com Email UsFax: | [email protected] 53 We Do Your Level Best We Do Your Level Best Level Switch Float-Point™TM with Compact Junction Box

Application Specifications

The general purpose level float switch package Length: 3” to 8’ (7.6cm to 2.4m) provides reliable, multi-point liquid level detec- Accuracy: ± 3mm in water tion of relatively clean liquids such as water, Repeatability: ± 1 mm in water Specific gravity: 0.55 minimum diluted chemicals and light weight oils up to Orientation: ± 20° vertical 8’ (2.44m) with 1-5 reed switch outputs and a Switch points: 1-5 (factory set) compact junction box for integral wiring termi- Contact type: SPST reed(s) nation. The stainless steel level float switch is Contact rating: 240 VAC / VDC @ 60 VA Contact output: Normally open selected for high temperature or pressure pro- Process temp.: F: -40° to 392° cess tank level applications. C: -40° to 200° Ambient temp.: F: -40° to 140° C: -40° to 60° Pressure: 200 psi (13.8 bar) Features Enclosure rating: NEMA 4X (IP65) Enclosure mat.: PP, UL94VO • Multi-point float level switch package for Terminal strip: 12-pole, socket Conduit entrance: 1/2” NPT high temp and pressure Wetted material: 316 SS Process mount: 2” NPT • 60VA VA dry contacts selectable NO or NC Classification: General purpose Compliance: CE, RoHS via float orientation Approvals: UL

• Rugged 316 stainless steel ﬂoat, guide and process mounting plug Tech Tip • Polypropylene enclosure rated NEMA 4X Float-Point is an excellent choice for high with swivel base for conduit alignment temperature applications up to 392º F (200º C). Use 1-5 float points based upon • Assembled to your guide length and switch your level requirements. The reed con- set point dimensions tacts provide a reliable switch interface with external control devices such as a PLC, DCS or SCADA. Junction Box The compact junction box is constructed of UL approved fire retardant polypropylene and comes pre-wired with a 12-pole terminal strip.

AVAV26-S24326-S243

AV_6-S243 Junction box with LM90-1001 liquid tight fitting

54 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best High Temperature Multi-Point Level Detection Level Switch

Relay Control Side Mount For process automation with Order the LM50 side mount pumps, valves and alarms, bracket for easy installation package your level switch on open tanks. The adjust- assembly with our remote relay able polypropylene bracket controllers offered in a 35 mm bolts to the tank side wall or DIN package. See page 73 for structural apparatus. more details. LC40-1001 LM50-1001

Dimensions

AV46-S243 137 PP 'LD PP

) 6SHFLI\

PP ( 6SHFLI\ PP ' 6SHFLI\ & 6SHFLI\ % 6SHFLI\ $ 6SHFLI\

IP 65 Float-Point

Ordering Notes AV 6-S243------1) Specify the applicable A, B, C, D, E dimensions at the end of the part Number of floats number (ie: AV26-S243-70"-68"-10"). 1 One float 2) The dimensions may be specified in 2 Two floats 1/2" (1.3 cm) increments. The guide 3 Three floats length or A-dimension may be specified 4 Four floats from 4" to 96" (10cm to 2.4m). The 5 Five floats Dimensions (1) (2) float or B, C, D, E dimensions may be A Specify specified from 1.5" to 94.5" (3.8cm to B Specify 2.40m) with a minimum distance of C Specify (if applicable) 2.5" (6.3cm) between each dimension. D Specify (if applicable) To calculate the guide length adder, E Specify (if applicable) round up the A-dimension to the next F Specify (if applicable) inch (2.5cm), multiply it by $10 per inch (2.5cm), and add that sum to Orders for this custom built product are non-cancellable and/or non-returnable the price.

55 www.flowline.com Email UsFax: | [email protected] 55 We Do Your Level Best We Do Your Level Best Level Switch Switch-Pak™TM with Compact Level Controller

Application Specifications

The general purpose level switch package provides Length: 6” to 10’ (15cm to 3m) reliable, high or low liquid level detection with a Accuracy: ± 1mm in water 16A compact relay controller for pump or valve Repeatability: ± 0.5mm in water Orientation: ± 20° vertical control. The optional flash alarm brings attention Switch points: 1 (factory set) to alarm conditions. Available in three level sensor LED indication: Sensor, power & relay technologies, select the sensor type based upon Supply voltage: 120 / 240 VAC @ 50-60 Hz. your application media. This polypropylene or PVDF Consumption: 0.25A maximum Strobe type: -X22X: N/A liquid level switch package is broadly applied in bulk -X21X: Xenon tube storage, sump and day tank level applications for Strobe flash: -X22X: N/A high level control or low level control. -X21X: 1 per second Contact type: (1) SPDT relay Contact rating: 250 VAC @ 16A Contact output: Selectable NO / NC Features Contact delay: 0-60 seconds Process temp.: F: -40° to 176° AU13-4213 C: -40° to 80° Polypropylene or PVDF single-point Ambient temp.: F: -40° to 140° level switch package for corrosive liquids C: -40° to 60° Pressure: AV13: 25 psi (1.7 bar) AU13 / AZ13: 150 psi Fail-safe relay control of pumps or (10 bar) valves with 0-60 second delay Enclosure rating: NEMA 4X (IP65) Encl. material: -X21X: PP, UL94VO & PC -X22X: PP, UL94VO Offered in 3 sensing technologies for broad Conduit entrance: 1/2” NPT application coverage: ultrasonic, vibration & Wetted material: AV13-42XX: PP buoyancy AU13-42XX: PP AU13-52XX: PVDF AU13-52XX: PVDF / PFA Polypropylene enclosure rated NEMA 4X AZ13-42XX: PP-Ryton® with swivel base for conduit alignment Process mount: -X2X3: 2” NPT -X2X7: 1 1/2” G Classification: General purpose Optional strobe brings immediate Compliance: CE attention to level alarm conditions

Invert switch changes relay state from NO to NC without rewiring Relay Control

The AC powered relay controller has a Tech Tip 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. The For applications with highly rugged NEMA 4X enclosure is made of corrosive media such as UL approved fire retardant polypropylene hydrofluoric acid, select the and features a 300° swivel base for easy PVDF wetted material option Side Mount conduit alignment. for years of lasting and Order the LM50 side mount reliable performance. The bracket for easy installation PVDF fitting is heat welded on open tanks. and custom assembled to your A-dimension with either a PVDF buoyancy or PFA ultrasonic sensor.

AU13-5223 LM50-1001 Controller

56 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best High or Low Level Control Level Switch

Sensors

Vibration Ultrasonic Buoyancy • Applied in wastewater with light • Broadly applied in chemicals • Applied in clean water and coating or scaling and light weight oils non-coating chemicals

• Available in Ryton® • Available in PP or PFA • Available in PP or PVDF

Dimensions

AU13-4213 2" NPT (1-1/2" G) 2.8" 71mm) (

3.5"(89mm) A (Specify) 6.5"(165mm)

Strobe Alert The controller with Strobe Alert configuration flashes when the relay is energized during a high or low level alarm condition.

Switch-Pak

Ordering Notes A 13- 2 - 1) Select the best sensor technology based upon your application. Sensor technology (1) 2) Vibration only available in PP/Ryton configuration. Z Vibration 3) Specify the A-dimension at the end of the part U Ultrasonic number (ie: AV13-4223-17"). The dimension may V Buoyancy be specified in 1/2" (1.3cm) increments from 6" Wetted material (2) to 10' (15cm to 3m). 4 PP 5 PVDF 4) To calculate the length adder, round up the Configuration A-dimension to the next foot (30cm), multiply it 1 Controller with Strobe Alert by the selected material, and add that sum to 2 Controller only the price. For PP, add $10 per foot (30cm). For Process mount PVDF, add $40 per foot (30cm). 3 2" NPT (US) 7 1 1/2" G (Metric) Dimensions (3) (4) IP A Specify (PP) 65 (PVDF)

57 www.flowline.com Email UsFax: | [email protected] 57 We Do Your Level Best We Do Your Level Best Level Switch Switch-Pak™TM with Compact Junction Box

Application Specifications

The general purpose level switch package Length: 6” to 10’ (15cm to 3m) provides reliable, high or low liquid level Accuracy: ± 1mm in water detection with one relay or reed switch Repeatability: ± 0.5mm in water Orientation: ± 20º vertical output and a compact junction box for Switch points: 1 (factory set) integral wiring termination. Available in three Supply voltage: AV16: N/A level sensor technologies, select the sensor AU18: 12-36 VDC AZ18: 12-30 VDC type based upon your application media. Consumption: AV16: N/A This PP or PVDF liquid level switch package AU18 / AZ18: 25 mA max is broadly applied in bulk storage, sump and Contact type: AV16: (1) SPDT reed AU18 / AZ18: (1) SPST relay day tank level applications as a high level Contact rating: AV16: 15 VA, 0.25A max alarm or low level alarm. AU18 / AZ18: 60 VA, 1A max. Contact output: Selectable NO / NC Process temp.: F: -40° to 176°, C: -40° to 80° Ambient temp.: F: -40° to 140°, C: -40° to 60° Features Pressure: AV16: 25 psi (1.7 bar) AU18 / AZ18: 150 psi (10 bar) Enclosure rating: NEMA 4X (IP65) Polypropylene or PVDF single-point level Enclosure mat.: PP, UL94VO switch package for corrosive liquids Terminal strip: 6-pole, socket Conduit entrance: 1/2” NPT Wetted material: AV16-424X: PP 60VA relay or 15VA dry contact AU18-424X: PP selectable NO or NC via wiring AU18-524X: PVDF AU16-524X: PVDF AZ18-424X: PP-Ryton® Offered in 3 sensing technologies for Process mount: -X243: 2” NPT broad application coverage: ultrasonic, -X247: 1 1/2” G vibration & buoyancy Classification: General purpose Compliance: CE Polypropylene enclosure rated NEMA 4X with swivel base and terminal strip Relay Control For process automation with pumps, valves Tech Tip and alarms, package your level switch assembly with our remote relay control- For applications with highly AU15-4243 lers offered in a 35 mm DIN package. See corrosive media such as page 73 for more details. hydrofluoric acid, select the PVDF wetted material option for years of lasting and reliable performance. The PVDF extension fitting is heat welded and custom assembled to your A-dimension with either a Side Mount PVDF buoyancy or PFA LC40-1001 ultrasonic sensor. Order the LM50 side mount bracket for easy installation on open tanks.

AV16-5243 LM50-1001

58 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best High or Low Level Detection Level Switch

Sensors

Vibration Ultrasonic Buoyancy • Applied in wastewater with light • Broadly applied in chemicals • Applied in clean water and non- coating or scaling and light weight oils coating chemicals

• Available in Ryton® • Available in PP or PFA • Available in PP or PVDF

Dimensions AV16-4243 2" NPT (1-1/2" G) 2.8" (71mm)

2.5"(64mm) A (Specify) 3.6"(92mm)

Junction Box The compact junction box is constructed of UL approved fire retardant polypropylene with a 6-pole terminal strip.

IP 65 Switch-Pak

Ordering Notes A 1 - 24 - 1) Select the best sensor technology based upon your application. Sensor technology (1) 2) Available only in the following configurations: Z Vibration Vibration = AZ18 U Ultrasonic Ultrasonic = AU18 V Buoyancy Buoyancy = AV16 Contacts (2) 3) PVDF is available in ultrasonic and buoyancy 6 SPDT reed 8 SPST relay configurations Wetted material (3) 4) Specify the A-dimension at the end of the part 4 PP number (ie: AV16-4243-17"). The dimension may 5 PVDF be specified in 1/2" (1.3cm) increments from 6" Process mount to 10' (15cm to 3m). 3 2" NPT (US) 5) To calculate the length adder, round up the 7 1 1/2" G (Metric) A-dimension to the next foot (30cm), multiply it Dimensions (4) (5) by the selected material, and add that sum to the A Specify (PP) price. For PP, add $10 per foot (30cm). For PVDF, (PVDF) add $40 per foot (30cm).

59 www.flowline.com Email UsFax: | [email protected] 59 We Do Your Level Best We Do Your Level Best Level Switch Switch-Pro™TM with Compact Level Controller

Specifications

Accuracy: ± 1mm in water Repeatability: ± 0.5mm in water LED indication: Sensor, power & relay Supply voltage: 120 / 240 VAC @ 50-60 Hz. Consumption: 0.25A maximum Strobe type: -X12X: N/A -X11X: Xenon tube Strobe flash: -X12X: N/A -X11X: (1) per second AU13-1120 Contact type: (1) SPST relay Controller Contact rating: 250 VAC @ 16A Contact output: Selectable NO / NC Contact delay: 0-60 seconds Application Features Process temp.: F: -40° to 176° C: -40° to 80° Intended for side wall installation, Rugged polypropylene, Ryton® Ambient temp.: F: -40° to 140° the general purpose level switch or PFA sensor for corrosive liquid C: -40° to 60° package provides reliable liquid level Pressure: 150 psi (10 bar) @ 25º applications C., derated @ 1.667 detection with a 16A compact level psi (0.113 bar) per ºC. controller for pump or valve control. Fail-safe relay control of pumps above 25º C. The optional ﬂash alarm brings or valves with 0-60 second delay Enclosure rating: NEMA 4X (IP65) Enclosure mat.: -X11X: PP, UL94VO & PC attention to alarm conditions. Offered -X12X: PP, UL94VO in two level sensor technologies, Polypropylene enclosure rated Conduit entrance: 1/2” NPT select the type and material based NEMA 4X with swivel base for Wetted material: AZ13-11XX: Ryton® AU13-11XX: PP upon your application media. This conduit alignment AU13-21XX: PFA liquid level switch package is widely Process mount: 3/4” NPT (3/4” G) applied in bulk storage and process Optional strobe brings immediate Mount. gasket: Viton® Classification: General purpose tank level applications for high level attention to level alarm conditions Compliance: CE control or low level control. Invert switch changes relay state Tech Tip from NO to NC without rewiring AZ13-1120 Offered in 2 sensing technologies 3/4" NPT The AC powered relay controller has (3/4" G) a 16A relay, adjustable time delay, for broad application coverage:

ultrasonic & vibration 2.8"

LED indicators and NO or NC invert (71 mm) switch. The NEMA 4X enclosure is made of UL approved fire retardant PP with a 300° swivel base. 3.2" (81 mm) 2.1" (54 mm) 3.9" (99 mm) 2.8" (71 mm) 8.2" (210 mm) Switch-Pro

Ordering Notes A 13- 1 1) Select the best sensor technology based upon your application. Sensor technology (1) 2) PFA is available in ultrasonic configuration. Z Vibration U Ultrasonic Wetted material (2) 1 PP/Ryton 2 PFA Configuration 1 Controller with Strobe Alert 2 Controller only Process mount IP 0 NPT (US) 65 4 G (Metric)

60 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Pro™ with Compact Junction Box Level Switch

Specifications

Accuracy: ± 1mm in water Repeatability: ± 0.5mm in water Supply voltage: AZ18: 12-30 VDC AU18: 12-36 VDC Consumption: 25 mA maximum Contact type: (1) SPST relay Contact rating: AU18 / AZ18: 60 VA, 1A max. AZ18-1130 Contact output: Selectable NO / NC Process temp.: F: -40º to 176º C: -40º to 80º Junction Box Ambient temp.: F: -40° to 140° C: -40° to 60° Pressure: 150 psi (10 bar) Enclosure rating: NEMA 4X (IP65) Enclosure mat.: PP, UL94VO Terminal strip: 6-pole, socket Application Features Conduit entrance: 1/2” NPT Wetted material: AZ18-113X: Ryton® Intended for side wall installa- Rugged polypropylene, Ryton® AU18-113X: PP tion, the general purpose level or PFA sensor for corrosive liquid AU18-213X: PFA switch package provides reliable applications Process mount: 3/4” NPT (3/4” G) Mount. gasket: Viton® liquid level detection with one 1A Classification: General purpose relay and a compact junction box 60VA relay selectable NO or NC Compliance: CE for integral wiring termination. via power supply wiring polarity Available in two level sensor technologies, select the type and Polypropylene enclosure rated material based upon your appli- NEMA 4X with swivel base and cation media. This liquid level terminal strip switch package is widely applied in bulk storage and process tank Offered in 2 sensing technologies AU15-1130 level applications as a high level for broad application coverage: 3/4" NPT alarm or low level alarm. ultrasonic & vibration (3/4" G) 2.8" Tech Tip (71 mm) The NEMA 4X enclosure is made of UL approved fire retardant 2.3" 2.1" polypropylene and features a 300° swivel base for easy conduit alignment. (57 mm) (54 mm) The power and switch conductors are prewired to the terminal strip. 2.8" (71 mm) 2.8" (71 mm) 7.5" (191 mm)

Switch-Pro

Ordering Notes A 18- 13 1) Select the best sensor technology based upon your application. Sensor technology (1) 2) Vibration only available in Ryton wetted Z Vibration material. U Ultrasonic Wetted material (2) 1 PP/Ryton 2 PFA Process mount IP 0 NPT (US) 65 4 G (Metric)

61 www.flowline.com Email UsFax: | [email protected] 61 We Do Your Level Best We Do Your Level Best Level Switch Float-Point™TM 55-Gallon Drum Alarm

Application Specifications

The general purpose, battery powered drum Orientation: Vertical alarm provides reliable liquid level monitoring Alarm: LED alarm standard of 55-gallon drums. The stainless steel float Supply voltage: 9 volt battery LED indication: High / low alarm assembly is available in three configurations Process temp.: F: -40° to 302° including high alarm, low alarm or high and C: -40° to 150° low level alarm. In the event of an alarm Pressure: 250 psi (17.23 bar) Float material: 316 Stainless steel condition, the battery powered LED will Stem/fitting mat: 316 Stainless steel actuate to alert the user. Select the compact Grip rings: P-15-7 Mo SS alarm which is mounted on the float stem, or Float SG: 0.73 (+/- 0.02) the remote alarm which is separated from the Contact rating: 30 watts SPST AV17-S301 240 VAC (0.14A resistive) float stem with a 72” (1.82m) cable. Compact 120 VAC (0.28A resistive) 120 VDC (0.07A resistive) Alarm 24 VDC (0.28A resistive) Wire type: 2 or 4 conductor, #22 AWG Features (-S401, -S501, -S601 only) Wire length: 6’ (1.82m) (-S401, -S501, • Portable, 9V battery powered LED alarm -S601 only) Wire jacket mat: Halar jacketed (-S401, with test switch -S501, -S601 only) Process mount: 3/4” NPT • Single or two-point alarm for 55, 30 and 20 Enclosure rating: NEMA 4 Enclosure mat.: Polycarbonate gallon drums Classification: General purpose Compliance: CE, RoHS • Rugged 316 stainless steel float, stem and Approvals: UL mounting plug AV17-S401 • NEMA 4 enclosure available in compact Remote and remote types Alarm Dimensions

Alarm Front Alarm Back Alarm Side AV17-S301 AV17-S201 AV17-S101 Liquid Tight AV17-S601Fitting, typical AV17-S501 AV17-S401 2.5" (63.5) 2.13" (54.0) 72" 2" (1828.8 50.8) 50 typical

3/4"-14 NPT,

50 typical HIGH TEST / OFF / ON 2.5" 1" 0.125" (63.5) 3.2) LOW actuation point Pg11/16

31" 31" 0.125" 3.2) 1" 0.125" 3.2) actuation point actuation point 1.59" (40.4) 32" 0.125" max 2" 0.125" 32" 0.125" (50.8 3.2) (812.8 3.2) (812.8 3.2)

.90" (22.9) max

Float-Point

Ordering Notes AV17-S 01 1) Select the compact or remote mount alarm type based on the preferred LED viewing location. Compact Mount Alarm Remote Mount Alarm (1) 1 High alarm 4 High alarm 2 Low alarm 5 Low alarm 3 High & low alarm 6 High & low alarm

62 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Tek™ Ultrasonic Level Switch Level Switch

Application Specifications

CSA approved for hazardous environ- Orientation: Universal ments, the intrinsically safe ultrasonic Accuracy: ± 1mm in water point level switch provides reliable liquid Repeatibility: ± 0.5mm in water Supply voltage: 12-36 VDC level detection of chemical, solvent, hy- Consumption: 25 mA maximum drocarbon and petroleum based liquids Contact type: (1) SPST relay with a 1A relay output. Media examples Contact rating: GP: 60 VA IS: 32 VDC @ 0.5A include fuel, acetone and hydrochloric Contact output: Selectable NO / NC acid. The submersible polypropylene Process temp.: F: -40° to 176° or PFA liquid level sensor is universally C: -40° to 80° mounted through the tank wall or inside Pressure: 150 psi (10 bar) @ 25º C., derated @ 1.667 the tank as a high level alarm or low level psi (0.113 bar) per ºC. alarm. above 25º C. Sensor rating: -1XX5: NEMA 6 (IP68) -2XX5: NEMA 4X (IP65) Sensor material: -1XX5: PP Features -2XX5: PFA Cable jack. mat.: -1XX5: PP CSA approved intrinsically safe for LU10-1305 -2XX5: PFA use in hazardous environments Cable type: 4-conductor, #22 AWG, shielded Cable length: 10’ (3m) ® Submersible polypropylene or PFA Teflon Process mount: 3/4” NPT (3/4”” G / Rp) sensor and cable for corrosive liquids Mount. gasket: Viton® Classification: Intrinsically safe Certificate: CSA, LR 79326 60VA relay selectable NO or NC via Compliance: CE power supply wiring polarity Approvals: Class I, Groups A, B, C & D; Class II, Groups E, LU10-1405 Compatible with Smart Trak and F & G; Class III Parameters: Vmax = 32V, Imax = 300 Switch-Pak installation fittings mA, Pmax = 1.3W, Ci = 0 µF, Li = 0 µH

Tech Tip

Select the PFA sensor for use in highly corrosive and/or ultrapure applications such as LU10-2305 wafer etching.

Ultrasonic

Ordering Notes LU10- 5 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the Sensor material (1) end of the part number (ie: LU10-1305-25'). 1 PP For PP, add $20 for 25' (7.6m) or $40 for 50' 2 PFA (15.2m) to the price. For PFA, add $75 for 25' Sensor length (7.6m) or $150 for 50' (15.2m) to the price. 3 Short 2) The short metric level sensor has conical Rp 4 Long threads on both sides of the wrench flat. The Process mount (2) long Metric level sensor has straight G threads 0 NPT (US) on the sensing side and conical Rp threads on 2 G / Rp (Metric) the cable side of the wrench flat.

63 www.flowline.com Email UsFax: | [email protected] 63 We Do Your Level Best We Do Your Level Best Level Switch Switch-Tek™TM Vibration Level Switch

Application Specifications

The general purpose vibration point level switch Orientation: Universal provides reliable liquid level detection of dirty liq- Accuracy: ± 1mm in water uids such as those with light to medium coating, Repeatibility: ± 0.5mm in water scaling or foaming characteristics with a 1A re- Supply voltage: 12-28 VDC lay output. Media examples include wastewater, Consumption: 25 mA maximum Contact type: (1) SPST relay diluted caustic soda and light weight oil. For op- Contact rating: 60 VA, 1A maximum timum performance, the liquid level switch auto- Contact output: Selectable NO / NC matically adjusts for coating build up, and if nec- Maint. alarm: NPN transistor, 10 mA essary, outputs a proactive maintenance alarm to maximum request cleaning. The submersible Ryton® liquid Process temp.: F: -40° to 176° C: -40° to 80° level sensor is universally mounted through the Pressure: 150 psi (10 bar) @ 25º tank wall or inside the tank as a high level alarm C., derated @ 1.667 or low level alarm. psi (0.113 bar) per ºC. above 25º C. Sensor rating: NEMA 6 (IP68) Sensor material: Ryton® Features LZ12-1405 Grommet mat.: Viton® Cable jack. mat.: Polypropylene Cable type: 5-conductor, shielded Automatic coating adjustment Cable length: 10’ (3m) optimizes sensor performance Process mount: 3/4” NPT (3/4” G) Mount. gasket: Viton® Classification: General purpose Submersible Ryton® sensor with Compliance: CE polypropylene cable for corrosive liquids

Coating alarm proactively alerts user when cleaning is required

60VA relay selectable NO or NC via 5(/$< 137 5S 137 * 5HG power supply wiring polarity %ODFN :KLWH 1&12

*UHHQ &20 PP Compatible with Smart Trak and 2UDQJH 0DLQW 6KOG &DEOH P Switch-Pak installation fittings PP PP PP Intelligence

Using self-learning technology, the sensor automatically adjusts to increased build-up on the forks for maximum performance. If the coating becomes sub- stantial, the sensor will actuate a transistor alarm for proactive maintenance.

Vibration

Ordering Notes LZ12-14 5 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the Process mount (1) (2) end of the part number (ie: LZ12-1405-25). 0 NPT (US) Add $20 for 25' (7.6m) or $40 for 50' (15.2m) 2 G (Metric) to the price. 2) The metric level sensor has straight G threads on the sensing side and conical Rp threads on the cable side of the wrench flat.

64 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Tek™ Vertical Buoyancy Level Switch Level Switch

Application Specifications

The general purpose buoyancy point level switch Orientation: ± 20° vertical provides reliable liquid level detection of relatively Accuracy: ± 2mm in water clean water and chemical solutions with a 15VA Repeatability: ± 1mm in water Specific gravity: 0.8 minimum reed switch output. Media examples include boric Contact type: (1) SPDT reed acid and ultrapure water. The bafﬂe body elimi- Contact rating: 15 VA, 0.25A maximum nates level switch chatter caused by turbulence. Contact output: Selectable NO / NC The submersible polypropylene or PVDF liquid Process temp.: F: -40° to 176° C: -40° to 80° level sensor is mounted vertically inside the tank Pressure: 25 psi (2 bar) @ 25º C, as a high level alarm or low level alarm. derated @ 1.667 psi (0.113 bar) per ºC above 25º C Sensor rating: NEMA 6 (IP68) Sensor material: -13X1: Polypropylene Features -53X1: PVDF Cable jack. mat.: -13X1: Polypropylene Baffle body and stabilized float dampen -53X1: PFA Cable type: 3-conductor, shielded out switch chatter Cable length: 10’ (3m) Process mount: 3/4” NPT (3/4” Rp) Submersible polypropylene or PVDF Classification: General purpose sensor and cable for corrosive liquids Compliance: CE

15VA dry contact selectable NO or NC state via wiring selection Relay Control

Compatible with Smart Trak and Switch- For process automation with pumps, valves Pak installation fittings and alarms, package your buoyancy level switch with our remote relay controllers LV10-1301 offered in a 35 mm DIN package. See page Tech Tip 73 for more details.

For years of reliable service in highly corrosive media, select the PVDF material option. The rugged sensor features a PVDF body with a PFA cable. LC40-1001

LV10-5301

Buoyancy

Ordering Notes LV10- 3 1 1) To special order a 25' (7.6m) or 50' (15.2 m) level sensor cable, place the cable length at Sensor material (1) the end of the part number (ie: LV10-1305-25'). 1 PP For PP, add $20 for 25' (7.6m) or $40 for 50' 5 PVDF (15.2m) to the price. For PFA, add $75 for 25' Process mount (7.6m) or $150 for 50' (15.2m) to the price. 0 NPT (US)

5 Rp (Metric)

65 www.flowline.com Email UsFax: | [email protected] 65 We Do Your Level Best We Do Your Level Best Level Switch Switch-Tek™TM Optic Leak Detection Switch

Application Specifications

The general purpose optic leak switch Orientation: Universal provides reliable leak detection in and Accuracy: ± 1mm in water around secondary containment sumps, Repeatibility: ± 0.5mm in water tanks and piping systems with a 1A relay Supply voltage: 12-36 VDC Consumption: 25 mA maximum output. Media examples include sulfuric Contact type: (1) SPST relay acid, water and diesel. The submersible Contact rating: 60 VA, 1A maximum polypropylene or PFA liquid leak detec- Contact output: Selectable NO / NC Process temp.: F: -40° to 176° tion sensor is mounted through the wall C: -40° to 80° or within the interstitial space. Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C Features Sensor rating: NEMA 6 (IP68) Sensor material: -1XX5: Polypropylene Submersible polypropylene or -2XX5: PFA Cable jack. mat.: -1XX5: Polypropylene ® PFA Teflon sensor and cable for -2XX5: PFA corrosive liquids Cable type: 4-conductor, shielded Cable length: 10’ (3m) L010-1305 Process mount: 3/4” NPT (3/4” G) 60VA relay selectable NO or NC Mount. gasket: Viton® via power supply wiring polarity Classification: General purpose Compliance: CE Fail-safe leak sensor inverts wet to alert user for maintenance L010-1405 Tech Tip The optic leak detection switch is easily placed in the interstitial space of double wall tanks or threaded into a collection trap in secondary containment piping.

Optic

Ordering Notes LO10- 5 1) To special order a 25' (7.6m) or 50' (15.2 m) level sensor cable, place the cable length at Sensor material (1) the end of the part number (ie: LO10-1305-25'). 1 PP For PP, add $20 for 25' (7.6m) or $40 for 50' 2 PFA (15.2m) to the price. For PFA, add $75 for 25' Sensor length (7.6m) or $150 for 50' (15.2m) to the price. 3 Short 2) The short Metric level sensor has conical Rp 4 Long threads on both sides of the wrench flat. The Process mount (2) long Metric level sensor has straight G threads 0 NPT (US) on the sensing side, and conical Rp threads on 2 G / Rp (Metric) the cable side of the wrench flat.

66 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Tek™ Guard Capacitance Level Switch Level Switch

Application Specifications

The general purpose guard capacitance point level Orientation: Universal switch provides reliable high or low liquid level detec- Accuracy: ± 1mm in water tion of water based conductive liquids with light coating, Repeatability: ± 0.5mm in water crystallizing or scaling characteristics with a 1A relay Dielectric range: > 20 constants Conductive range: > 100 µ output. Media examples include copper sulfate and Supply voltage: 12-36 VDC brine. The RF guard circuit eliminates the coating signal Consumption: 25 mA maximum path between the active and reference electrodes. The Contact type: (1) SPST relay Contact rating: 60 VA, 1A maximum submersible polypropylene liquid level sensor is univer- Contact output: Selectable NO / NC sally mounted through non-metallic tank walls or inside Process temp: F: -40° to 176° the tank as a high level alarm or low level alarm. C: -40° to 80° Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C. Features Sensor rating: NEMA 6 (IP68) Sensor material: Polypropylene Guard circuit optimizes performance Cable jack. mat.: Polypropylene in coating type media Cable type: 4-conductor, shielded Cable length: 10’ (3m) Process mount: 3/4” NPT (3/4” G) Submersible polypropylene sensor Mount. gasket: Viton® body and cable for corrosive liquids Classification: General purpose Compliance: CE 60VA relay selectable NO or NC via power supply wiring polarity

Compatible with Smart Trak and Reference Switch-Pak installation fittings LP15-1405

Tech Tip Guard For best performance in coating liquids, install the sensor horizontally through the side wall of a non- Active metallic tank.

5(/$< 137 5S 137 * 5HG %ODFN :KLWH 121& *UHHQ &20 PP 6KOG &DEOH P PP PP PP

Capacitance

Ordering Notes LP15-14 5 1) To special order a 25' (7.6m) or 50' (15.2 m) level sensor cable, place the cable length at the end of Process mount (1) (2) the part number (ie: LP15-1405-25'). Add $20 for 0 NPT (US) 25' (7.6m) or $40 for 50' (15.2m) to the price. 2 G / Rp (Metric) 2) The metric level sensor has straight G threads on the sensing side and conical Rp threads on the cable side of the wrench flat.

67 www.flowline.com Email UsFax: | [email protected] 67 We Do Your Level Best We Do Your Level Best Level Switch Switch-Tek™TM Non-Intrusive Capacitance Level Switch

Application Specifications

The general purpose non-intrusive ca- Accuracy: ± 1mm in water pacitance level switch provides reliable Repeatability: ± 0.5mm in water liquid level detection of water based Dielectric range: > 20 constants Conduct. range: > 100 µ conductive liquids with non-coating and/ Supply voltage: 12-36 VDC or scaling characteristics with a 1A relay Consumption: 25 mA maximum output. Media examples include hydro- Contact type: (1) SPST relay chloric, sulfuric acid and water. The liq- Contact rating: 60 VA, 1A maximum Contact output: Selectable NO / NC uid level sensor is bracket mounted on Process temp.: F: -40° to 176° the exterior wall of non-metallic tanks C: -40° to 80° and applied as a high level alarm or low LP50-6005 Enclosure rating: NEMA 4X (IP65) Enclosure mat.: PSO level alarm. Cable jack. mat.: Polypropylene Cable type: 4-conductor, shielded Cable length: 10’ (3m) Conduit entrance: 1/2” NPT Features Tank mat. comp.: Non-metallic Tank mounting: Bracket w/3M adhesive, Non-intrusive level detection through plastic thermal weld Bracket material: -6005: Polyethylene plastic or fiberglass walls -1005: Polypropylene -5005: PVDF Installed with polyethylene, polypro- Classification: General purpose pylene or PVDF adhesive 3M Compliance: CE mounting brackets Rugged PSO enclosure rated NEMA Front View Side View 4X with conduit connector 60VA relay selectable NO or NC via power supply wiring polarity

Tech Tip With two simple calibration adjustments, the non-intrusive switch set point will Calibration be customized to your specific tank wall Components thickness and application media.

Capacitance

Ordering Notes LP50- 005 1) Select the bracket material that matches the tank wall. Each level sensor comes with one Bracket material (1) (2) bracket. Additional brackets may be ordered 1 PP separately. See page 84 for more details. 5 PVDF 2) To special order a 25' (7.6m) or 50' (15.2 m) 6 PE level sensor cable, place the cable length at the IP end of the part number (ie: LP50-6005-25'). 65 Add $20 for 25' (7.6m) or $40 for 50' (15.2m) to the price.

68 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Tek™ Mini-Float Level Switch Level Switch

Specifications

Orientation: LV20: ±20° vertical LH25: ±20° horizontal Accuracy: ± 5mm in water LH25-1201 Repeatability: ± 2mm in water Specific gravity: LV20: 0.8 minimum LV20-1201 LH25: 0.6 minimum Contact type: (1) SPST reed Contact rating: LV20: 15 VA, 0.25A max. LH25: 30 VA, 0.5A max. Contact output: Selectable NO / NC Application Process temp.: LV20 | F: -40° to 176° C: -40° to 80° Offered in both vertical and horizontal LH25 | F: -40° to 221° C: -40° to 105° conﬁgurations, the general purpose mini- Pressure: LV20: 10 psi (0.7 bar) ﬂoat level switches provide reliable liquid LH25: 100 psi (6.9 bar) level detection of clean water and chemi- Sensor rating: NEMA 6 (IP68) cal solutions with a 15VA or 30VA reed Sensor material: LV20-12X1: Polypropylene LV20-52X1: PVDF switch output. Media examples include LH25-1201: Polypropylene water and sulfuric acid. The polypropyl- LH25-5201: PVDF LV20-5201 ene or PVDF liquid level sensors are Wire jack. mat.: LX2X-12X1: PVC LX2X-52X1: TFE mounted vertically inside the tank or hori- LH25: Polymeric zontally through the tank wall as a high Wire type: 2-conductor level alarm or low level alarm. Wire length: 2’ (61cm) Process mount: LV20: 1/8” NPT LH25: 1/2” NPT Classification: General purpose Features Compliance: CE Simple low-cost level switch PP solution for basic applications PP 5((' &DEOH FP PP

1& Offered in both vertical and PP

horizontal mounting configurations PP 137 Dry contact reed switch selectable NO or NC via float orientation

5((' 137 5S Small polypropylene or PVDF sensor

PP body with PVC, TFE or polymeric cable &DEOH FP PP

PP Mini-Float

Ordering Notes LV20- 201 1) To special order 25' (7.6m) or 50' (15.2 m) sensor Vertical wires, place the wire length at the end of the part Sensor material (1) number (ie: LV20-1201-25'). Add $10 for 25' (7.6m) 1 PP or $20 for 50' (15.2m) to the price. 5 PVDF LH25- 201 Horizontal Sensor material (1) 1 PP 5 PVDF

69 www.flowline.com Email UsFax: | [email protected] 69 We Do Your Level Best We Do Your Level Best Level Switch Switch-Tek™TM High-Temp Float Level Switch

Specifications

Orientation: LV3X: ±20° vertical LH35: ±20° horizontal Accuracy: ± 3mm in water Repeatability: ± 1mm in water LH35-S201 Specific gravity: LV3X: 0.7 minimum LH35: 0.6 minimum Contact type: (1) SPST reed Contact rating: LX35: 30 VA, 0.5A max. LV36: 100 VA, 1.5A max. LV35-S201 Contact output: Selectable NO / NC Process temp.: F: -40° to 392° C: -40° to 200° Application Pressure: LV35: 300 psi (20.7 bar) LV36: 500 psi (34.5 bar) Offered in both vertical and horizontal LH35: 500 psi (34.5 bar) conﬁgurations, the general purpose high- Sensor rating: NEMA 6 (IP68) Sensor material: 316 SS temp ﬂoat level switches provide reliable Wire jack. mat.: Polymeric liquid level detection of relatively clean water, Wire type: 2-conductor diluted chemicals and light weight oils with Wire length: 2’ (61cm) a 30VA or 100VA reed switch output. Media Process mount: LV35: 1/8” NPT LV36: 1/4” NPT examples include hot deionized water and LH35: 1/2” NPT cooking oil. The stainless steel liquid level Classification: General purpose sensors are mounted vertically inside the Compliance: CE, RoHS tank or horizontally through the tank wall as a high level alarm or low level alarm.

:LUH/HDGV Features LV36-S201 316 SS level sensor for high tem- 137 perature and pressure applications LH35 Dry contact reed switch selectable NO or NC via float orientation PLQ )LWWLQJ &HQWHUOLQH :LUH/HDGV PD[ Offered in both vertical and horizontal mounting configurations 12 PD[ 137

137 PD[ $SSUR[LPDWH $FWXDWLRQ/HYHO GLDPD[

LV35/36

Float

Ordering Notes LV3 -S201 1) The normally open or closed contact output is Vertical selectable based on the installed orientation of Maximum pressure (1) the float. 5 300 psi (20.7 bar) 6 500 psi (34.5 bar) LH3 -S201 Horizontal Maximum pressure (1) 5 500 psi (34.5 bar)

70 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Tek™ Interstitial Leak Detection Switch Level Switch

Specifications

Orientation: Horizontal Contact type: (1) SPST reed Contact rating: 30 watts 240 VAC (0.14A resistive) 120 VAC (0.28A resistive) Switch Open 120 VDC (0.07A resistive) 24 VDC (0.28A resistive) Switch Closed Contact output: NC (opens on rise) Process temp.: F: -40° to 221° Application C: -40° to 105° Pressure: 50 psi (3.4 bar) The general purpose float leak switch provides reliable leak detection in and Sensor rating: NEMA 6 (IP68) Float material: Foamed polypropylene around secondary containment sumps and tanks with a 1A relay output. The Body material: Valox 420 flat body Valox leak sensor is ideal for placement in hard to reach interstitial Pivot pin mat.: Stainless steel Wire type: 2 conductor, #22 AWG areas with limited space. In the event of a leak, the foam polypropylene float Wire length: 10' (3m) will rise to signal the presence of unwanted liquid in the containment vessel. Wire jacket mat: Halar jacketed Classification: General purpose The leak detection switch is typically mounted flat on the bottom of the sump Compliance: CE floor or secondary containment tank wall. Approvals: UL

Features Relay Control

• Valox sensor body with PP float and Halar® jacketed cable for For process automation with pumps, valves corrosive liquids and alarms, package your leak detection switch with our remote relay controllers • Flat, low profile sensor with minimal float rise for applications with offered in a 35 mm DIN package. See page limited space 73 for more details.

Dry contact, normally closed reed switch opens to signal the presence of liquid

Dimensions

End View Top View LC40-1001

0.375" (9.53) 3.00" (76.2) Tech Tip 1.50" (38.1) .75" REF To position the sensor under hard to reach (19.1) locations, tie a string or wire through the Side View cut out on the sensor body and pull it into Attach String Pivot Pin Float Switch 10' Cable place. To permanently locate the sensor, af- Here to Pull Housing Leads ﬁx it with a screw or zip tie. Through Tank

Float LH29-1001

71 www.flowline.com Email UsFax: | [email protected] 71 We Do Your Level Best We Do Your Level Best Level Switch StrobeTM Alert™ Compact Flash Alarm

Specifications

Supply voltage: LC09: 12-36 VDC LC10: 120 VAC @ 50-60 Hz. LC10-E: 240 VAC @ 50-60 Hz. Consumption: 3 watts max. Strobe color: Amber Strobe type: Xenon tube Strobe flash: 1 per second Strobe life: 10M cycles Electronics temp.: F: -40˚ to 158˚ C: -40˚ to 70˚ Enclosure rating: NEMA 4X (IP65) Encl. material: Polycarbonate Encl. compatibility: LC05, LC06, LC10,LC11 and LC30 enclosures Wire type: 2-wire, #22 AWG Wire length: 5" (12.7 cm) Wire jacket mat.: Polymeric Classification: General purpose Certificate: CSA: LR 79326

LC10-1004 Strobe shown mounted on LC10 relay controller

Application Features Tech Tip

Offered in both AC and DC pow- • High intensity amber flash alarm The alarm is commonly applied in tank ered configurations, the compact visually alerts on-site personnel spill prevention, pump or process protec- flash alarm brings immediate attention applications. We recommend the tion to process alarm conditions. • Rugged NEMA 4X polycarbonate use of secondary audible alarms in criti- Strobe Alert is compatible with any enclosure for harsh environments cal processes. of our round level or flow compact relay controllers and junction boxes. • Mounts directly on any Flowline Select the appropriate supply volt- round compact enclosure age for your application. PP

LC06-10X1 Junction Box PP IP 65 Strobe Alert Ordering Notes LC -1004 1) To factory configure the LC10-1004 for 240 VAC, place an E at the end of the P/N Supply voltage (1) (2) (ie: LC10-1004-E). 09 12-36 VDC 2) For field mount and conduit termination, 10 120 VAC order a LC06-10X1 junction box.

72 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Pro™ Remote Level Controller Level Switch

Specifications

Supply voltage: 120 / 240 VAC, 50-60 Hz. Consumption: 5 watts maximum LM94-1001 Sensor inputs: LC40/90: (1) level switch LC41: (2) level swiitches LC42/92: (3) level switches Sensor supply: 13.5 VDC @ 27 mA LED indication: Sensor, power & relay Contact type: LC40/90: (1) SPDT relay LC41: (1) SPDT relay, latching LC42/92: (2) SPDT relays, (one latching) LC40-1001 Contact rating: 250 VAC @ 10A Contact output: Selectable NO / NC Contact latch: LC40/90: N/A LC41: Selectable ON / OFF Application Features LC42/92: Selectable ON / OFF Available in CSA approved, general • Fail-safe relay control of pumps Contact delay: 0-60 seconds purpose (LC4X) or isolation (LC9X) or valves with 0-60 second delay Ambient temp.: F: -40° to 140° C: -40° to 60° with built-in intrinsic safety barriers Enclosure type: 35mm DIN rail for use with associated apparatus, • Optional built-in intrinsic Enclosure mat.: PP, UL94VO the level controller is offered in three safety barriers for hazardous Classification: LC4X: General purpose configurations for pump and valve LC9X: Associated applications (LC9X) apparatus control. The LC40/90 accepts one Compliance: CE (LC4X only) level sensor input and provides one • Easy setup with LED indicators Approvals: CSA, LR 79326 10A relay. The LC41 accepts two for sensor, power and relay Safety: Class 1, Groups A, B, C (LC9X only) & D; Class II, Groups E, level sensor inputs and provides status F & G; Class III one latching 10A relay for automatic Parameters: Voc = 17.47 VDC; Isc = fill or empty control. The LC42/92 • 35 mm DIN rail mount (LC9X only) 0.4597A; Ca = 0.494 µF; La = 0.119 mH accepts three level sensor inputs polypropylene enclosure with with one latching 10A relay output for removable terminal strips automatic fill or empty control, and a second non-latching 10A relay for • Invert switch changes relay state high level alarm or low level alarm. from NO to NC without rewiring For field mount installation, add a single or dual indicator NEMA box. 3.6" (92mm) 3.9" (98mm) 3.1" (79mm)

POWER INVERT DELAY INVERT DELAY The intrinsically safe ultrasonic level - + - +

RELAY 1 RELAY 2 STANDARD switch is CSA approved for hazard- CONTROLLER 1.8" 2.7" (44mm) (68mm) 35mm ous areas. See page 63 for details. DIN Rail LATCH

INPUT 1 INPUT 2AON OFF INPUT 2B LU10-1305 Switch-Pro

Ordering Notes LC -1001 1) Select the classification based on your general purpose or isolation (intrinsic safety Classification (1) (2) for associated apparatus) requirements. 4 General purpose 2) For field mount installation in a NEMA 4X 9 Isolation (hazardous) polycarbonate enclosure, order the LM94-1001 Contact(s) / input(s) (3) (single controller box) or the LM95-1001 (two 0 1 Relay / 1 sensor controller box). 1 1 Latching relay / 2 sensors 2 2 Relays (1 latching) / 3 sensors 3) LC91 not available.

73 www.flowline.com Email UsFax: | [email protected] 73 We Do Your Level Best We Do Your Level Best Level Switch Switch-Pro™TM Compact Level Controller

Application Specifications

The general purpose level controller is Supply voltage: 120 / 240 VAC, 50-60 Hz. offered in two configurations for pump and Consumption: 0.25A maximum valve control. The LC10 accepts one level Sensor inputs: LC10: (1) level switch LC11: (2) level swiitches sensor input and provides one 16A relay for Sensor supply: 13.5 VDC @ 27 mA high level control or low level control. The LED indication: Sensor, power & relay LC11 accepts two level sensor inputs and Strobe type: -10X1: N/A provides one latching 16A relay for automatic -10X2: Xenon tube Strobe flash: -10X1: N/A fill or empty control. The optional flash alarm -10X2: (1) per second brings attention to level alarm conditions. Contact type: LC10: (1) SPDT relay Package this level controller with our liquid LC11: (1) SPDT relay, latching level switch sensors and fittings. Contact rating: 250 VAC @ 16A Contact output: Selectable NO / NC Contact delay: 0-60 seconds Contact latch: LC10: N/A Features LC11: Selectable ON / OFF Ambient temp.: F: -40° to 140° • Fail-safe relay control of pumps or valves C: -40° to 60° Enclosure rating: NEMA 4X (IP65) with 0-60 second delay Enclosure mat.: -10X1: PP, UL94VO -10X2: PP, UL94VO & PC • Optional strobe brings immediate attention LC10-1002 Conduit entrance: 1/2 NPT Enclosure mount: 3/4” NPT (3/4” Rp) to level alarm conditions Classification: General purpose Compliance: CE Approvals: CSA, LR 79326 • Polypropylene enclosure rated NEMA 4X PP with swivel base for conduit alignment

• Easy setup with LED indicators for sensor, power and relay status PP

•

Invert switch changes relay state from NO PP to NC without rewiring PP Tech Tip The AC powered relay controller has a 16A relay, adjustable time delay, LED LC11-1001 indicators and NO or NC invert switch. The rugged NEMA 4X enclosure is made of UL approved fire retardant polypropylene with a swivel base for easy conduit alignment.

Switch-Pro

Ordering Notes LC1 -10 1) The level controller is compatible with level switch packages (junction box type) and level Contact / input(s) (1) switch sensors. 0 1 Relay / 1 sensor 1 1 Latching relay / 2 sensors Enclosure mount 0 NPT (US) 5 Rp (Metric) Configuration IP 1 Controller only 65 2 Controller with Strobe Alert

74 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Pro™ Compact Junction Box Level Switch

Application Specifications

Offered in small and large sizes, the Sensor inputs: LC05: 1-4 sensors compact junction box is ideal for sen- LC06: 1-2 sensors sor wiring and conduit termination. The Terminal strip: LC05: 12 pole socket LC06: 6 pole socket junction box is universally compatible Enclosure rating: NEMA 4X (IP65) with our level switch, flow switch and Encl. material: PP, UL94VO fitting products. The small enclosure Encl. mount: 1001: 3/4" NPT 1051: 3/4" Rp has 6 poles and is typically used with a Encl. rotation: 300˚ swivel base single level or flow switch sensor. The Conduit entrance: Single, 1/2" NPT large enclosure has 12 poles for mul- Temp. rating: F: -40˚ to 158˚ C: -40˚ to 70˚ tiple level switches and is typically used CE compliance: EN 61326 EMC with Smart Trak. EN 61010-1 safety

Features LC05-1001 Polypropylene enclosure rated NEMA 4X with 300° conduit swivel base

Compatible with Flowline sensors, installation fittings and alarms LC05-1001 Removable terminal strips with upper and lower screw poles

Offered in large and small sizes for single and multi-point installations

LC06-1001 LC06-1001

PP PP PP PP PP PP PP Switch-Pro

Ordering Notes LC0 -10 1 1) For a liquid tight cable connection, order the the LM90-1001 connector. Size / terminals (1) 5 Large / 12 pole (1-4 sensors) 6 Small / 6 pole (1-2 sensors) Enclosure mount IP 65 0 NPT (US) 5 Rp (Metric)

75 www.flowline.com Email UsFax: | [email protected] 75 We Do Your Level Best We Do Your Level Best Flow Switch IntroductionTM to Flow Switch Solutions

Flow Detection, Switching & Control

Flow switches detect a change in state from flow or no-flow within pipe or ducting. Correspondingly, the sensor inverts a contact to signal an alarm or control a pump or valve.

Flowline general purpose liquid and gas flow switches are offered in sensor and package configurations. Sensors are available in PP-Ryton® or PVDF bodies with a 1A SPST relay and adjustable flow switch set point.

The sensors are also available in packages with compact relay controllers for pump control or junction boxes for wiring termination. Select the appropriate flow switch type based upon your application media, supply, control and installation requirements.

Flow Switches Relay Controllers

Sensors Packages Compact Remote

FT10 / GT10 AX1X Controller AX1X Junction Box LC30 LC8X Page 77 Page 78 Page 79 Page 80 Page 81

Thermo-Flo FT10 GT10 AX1X AX1X LC30 LC8X Type Sensor Sensor + Controller Sensor + Junction Compact Controller Remote Controller Class GP Media Liquid Gas Liquid, Gas Function Low-Flow Alarm Low-Flow Shut Off Low-Flow Alarm Low-Flow Shut Off Relay(s) (1) SPST (1) SPDT (1) SPST (1) SPDT (1-2) SPDT Strobe Alarm - - - Optional - - - Optional - - - Supply 12-36 VDC 120-240 VAC 12-36 VDC 120-240 VAC

Temperature 140˚F (60˚C) - - - Pressure 150 PSI (10 bar) - - - Material PP-Ryton® , PVDF PP

76 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Thermo-Flo™ Liquid & Gas Flow Switch Flow Switch

Application Specifications

Offered in liquid and gas sensor types, the Set point range: FT10: 0.04 to 3 fps general purpose flow switch provides reliable (0.012 to 0.91 mps) low or no-flow detection of relatively clean, GT10: 1 to 90 fps (0.3 to 27 mps) non-coating media with one 1A relay output. Repeatability: ± 0.5% of set point Liquid examples include water and acetic acid. Response time: 1-10 seconds Available in Polypropylene-Ryton® and PVDF, Set point adjust.: Potentiometer the short flow sensor is used in pipe or ducting LED indication: Flow status Supply voltage: 14-36 VDC from 1/2” to 1 1/2”, and the long flow sensor Consumption: 70 mA maximum is used in 2” and up. The flow switch set point Contact type: (1) SPST relay may be adjusted from 0.04 to 3 fps in liquids, Contact rating: 60 VA, 1A maximum Contact output: Selectable NO / NC or 1 to 90 fps in gases as a low-flow alarm. The Process temp.: F: 32° to 140° flow sensor is best applied in applications with C: 0° to 60° relatively constant temperature. Ambient temp.: F: -40° to 140° C: -40° to 60° Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi Features (0.113 bar) per ºC FT10-1305 above 25º C Rugged Polypropylene-Ryton® or PVDF Sensor rating: NEMA 4X (IP65) Wetted material: -1XX5: PP-Ryton® sensor for corrosive liquids and gases -5XX5: PVDF Cable jack. mat.: -1XX5: Polypropylene Adjustable set point with LED for -5XX5: PFA Cable type: 4-conductor, shielded flow or no-flow status indication Cable length: 10’ (3m) Process mount: 3/4” NPT (3/4” G) 60VA relay selectable NO or NC via FT10-1405 Mount. gasket: Viton® Classification: General purpose power supply wiring polarity Compliance: CE

Solid state sensor is not damaged 137 137 by over-ranging flow velocities 5(/$< 5S 5S 5HG %ODFN :KLWH 121& *UHHQ &20 PP Pulse-point fitting 6KOG &DEOH P PP for metering pump PP applications PP

5(/$< 137 5S 137 * 5HG %ODFN :KLWH 121& FT50-5000 *UHHQ &20 PP 6KOG &DEOH P PP IP PP 65 Thermo-Flo PP

Ordering Notes T10- 5 1) To special order a 25' (7.6m) or 50' (15.2 m) flow sensor cable, place the cable length at Application media the end of the part number (ie: FT10-1305-25'). F Liquid For PP, add $20 for 25' (7.6m) or $40 for 50' G Gas (15.2m) to the price. For PFA, add $75 for 25' Sensor material (1) (7.6m) or $150 for 50' (15.2m) to the price. 1 PP / Ryton 2) Order the short flow sensor for use with pipe 5 PVDF sizes from 3/4"-1 1/2" (D25-D50) and the long Sensor length (2) sensor for 2" and higher (D63 up). 3 Short 3) The metric sensor is offered with straight G 4 Long threads on the sensing side and conical Rp Process mount (3) threads on the cable side of the wrench flat. 0 NPT (US) 2 G / Rp (Metric)

77 www.flowline.com Email UsFax: | [email protected] 77 We Do Your Level Best We Do Your Level Best Flow Switch Thermo-Flo™TM with Compact Flow Controller

Application Specifications

Offered in liquid and gas sensor types, the general Set point range: AT1X: 0.04 to 3 fps purpose flow switch package provides reliable (0.012 to 0.91 mps) no or low-flow detection of relatively clean non- AG1X: 1 to 90 fps (0.3 to 27 mps) coating media with a 16A compact flow controller Repeatability: ± 0.5% of set point for pump or process protection. Liquid examples Response time: 1-10 seconds includes water and sulfuric acid. The optional flash Set point adjust.: Potentiometer LED indication: Sensor, power & relay alarm brings attention to low-flow alarm conditions. Supply voltage: 120 / 240 VAC, 50-60 Hz. Available in Polypropylene-Ryton® and PVDF, the Consumption: 0.25A maximum short flow sensor is used in pipe or ducting from 1/2” Strobe type: -X61X: Xenon tube to 1 1/2”, and the long flow sensor is used in 2” and -X62X: N/A AT12-1620 Strobe flash: -X61X: 1 per second up. The flow switch set point may be adjusted from -X62X: N/A 0.04 to 3 fps in liquids, or 1 to 90 fps in gases for Contact type: (1) SPDT relay low-flow control. The flow sensor is best applied in Contact rating: 250 VAC @ 16A Contact output: Selectable NO / NC applications with relatively constant temperature. Contact delay: 0-60 seconds Process temp.: F: 32° to 140° C: 0° to 60° Features Ambient temp.: F: -40° to 140° C: -40° to 60° Pressure: 150 psi (10 bar) @ 25º C, Rugged Polypropylene-Ryton® or PVDF derated @ 1.667 psi sensor for corrosive liquids and gases (0.113 bar) per ºC above 25º C Enclosure rating: NEMA 4X (IP65) Fail-safe relay control of pumps or Enclosure mat.: -X61X: PP, UL94VO & PC valves with 0-60 second delay -X62X: PP, UL94VO Shown with Conduit entrance: 1/2” NPT Polypropylene enclosure rated NEMA Wetted material: -16XX: PP-Ryton® FT50-1000 -36XX: PVDF 4X with swivel base for conduit alignment fitting Process mount: 3/4” NPT (3/4” G) Mount. gasket: Viton® Optional strobe brings immediate Classification: General purpose Compliance: CE attention to flow alarm conditions

137 137 Invert switch changes relay state 5S * from NO to NC without rewiring PP PP Solid state sensor is not damaged by over-ranging flow velocities PP PP PP PP PP PP PP PP Thermo-Flo PP PP

Ordering Notes A 1 - 6 1) Select the short sensor for use with pipe sizes from 3/4"-1 1/2" (D25-D50) and the Application media long sensor for 2" and higher (D63 up). T Liquid G Gas Sensor length (1) 2 Short 4 Long Sensor material 1 PP / Ryton 3 PVDF Configuration 1 Controller with Strobe Alert 2 Controller only Process mount IP 0 NPT (US) 65 4 G (Metric)

78 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Thermo-Flo™ with Compact Junction Box Flow Switch

Application Specifications

Offered in liquid and gas sensor types, the Set point range: AT1X: 0.04 to 3 fps general purpose flow switch package provides (0.012 to 0.91 mps) reliable no or low-flow detection of relatively AG1X: 1 to 90 fps (0.3 to 27 mps) clean non-coating media with a 1A relay output Repeatability: ±0.5% of set point and compact junction box for wiring termination. Response time: 1-10 seconds Liquid examples includes water and acetic Set point adjust.: Potentiometer acid. Available in PP-Ryton® and PVDF, the LED indication: Flow status Supply voltage: 14-36 VDC short flow sensor is used in pipe or ducting Consumption: 70 mA maximum from 1/2” to 1 1/2”, and the long flow sensor Contact type: (1) SPST relay AT17-1630 is used in 2” and up. The flow switch set point Contact rating: 60 VA, 1A maximum Contact output: Selectable NO / NC may be adjusted from 0.04 to 3 fps in liquids, Process temp.: F: 32° to 140° or 1 to 90 fps in gases as a low-flow alarm. C: 0° to 60° The flow sensor is best applied in applications Ambient temp.: F: -40° to 140° C: -40° to 60° with relatively constant temperature. Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC Features above 25º C Enclosure rating: NEMA 4X (IP65) Rugged Polypropylene-Ryton® or PVDF 137 Enclosure mat.: PP, UL94VO 5S Terminal strip: 6-pole, socket sensor for corrosive liquids and gases Conduit entrance: 1/2” NPT

PP Wetted material: -163X: PP-Ryton® Adjustable set point with LED for -363X: PVDF Process mount: 3/4” NPT (3/4” G) flow or no-flow status indication Mount gasket: Viton® PP PP Classification: General purpose Compliance: CE Polypropylene enclosure rated NEMA 4X PP with swivel base and terminal strip PP PP

60VA relay selectable NO or NC via power supply wiring polarity 137 Solid state sensor is not damaged by * over-ranging flow velocities AT17-3630 PP

PP PP PP PP PP Junction Box Thermo-Flo

Ordering Notes A 1 - 63 1) Select the short sensor for use with pipe sizes from 3/4"-1 1/2" (D25-D50) and the Application media long sensor for 2" and higher (D63 up). T Liquid G Gas Sensor length (1) 7 Short 8 Long Sensor material 1 PP 3 PVDF Process mount IP 0 NPT (US) 65 4 G (Metric)

79 www.flowline.com Email UsFax: | [email protected] 79 We Do Your Level Best We Do Your Level Best Flow Switch Thermo-Flo™TM Compact Flow Controller

Application Specifications

The general purpose flow controller Supply voltage: 120 / 240 VAC, 50-60 Hz. accepts one flow sensor input, and Consumption: 0.25A maximum provides one 16A relay for low-flow Sensor input: (1) flow switch Sensor supply: 24 VDC @ 50 mA pump or process protection. The LED indication: Sensor, power & relay optional flash alarm brings attention to Strobe type: -10X1: N/A low-flow alarm conditions. Package this -10X2: Xenon tube Strobe flash: -10X1: N/A flow controller with our liquid or gas flow -10X2: (1) per second switch sensors. Contact type: (1) SPDT relay Contact rating: 250 VAC @ 16A LC30-1002 Contact output: Selectable NO / NC Contact delay: 0-60 seconds Features Ambient temp.: F: -40° to 140° C: -40° to 60° Fail-safe relay control of pumps or Enclosure rating: NEMA 4X (IP65) Enclosure mat.: 10X1: PP, UL94VO valves with 0-60 second delay 10X2: PP, UL94VO & PC Conduit entrance: 1/2” NPT Optional strobe brings immediate Enclosure mount: 3/4” NPT (3/4” Rp) attention to flow alarm conditions Classification: General purpose Compliance: CE Approvals: CSA, LR 79326 Polypropylene enclosure rated NEMA 4X with swivel base for conduit alignment Tech Tip Easy setup with LED indicators for The AC powered relay controller has a sensor, power and relay status 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. Invert switch changes relay state The rugged NEMA 4X enclosure is made from NO to NC without rewiring of UL approved fire retardant polypropylene with a swivel base for easy conduit Compatible with Flowline liquid and alignment. gas flow switch sensors

Controller

LC30-1001 2 ( 1mm)

1 (2 mm)

32 ( 1mm) 4 (11 mm) IP 65 Thermo-Flo

Ordering Notes LC30-10 1) For a liquid tight cable connection, order the LM90-1001 connector. Enclosure mount 0 NPT (US) 5 Rp (Metric) Configuration (1) 1 Controller only 2 Controller with Strobe Alert

80 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Thermo-Flo™ Remote Flow Controller Flow Switch

Specifications

Supply voltage: 120 / 240 VAC, 50-60 Hz. Consumption: 5 watts maximum Sensor inputs: LC80: (1) flow switch LC82: (2) flow swiitches Sensor supply: 24 VDC @ 50 mA LED indication: Sensor, power & relay Contact type: LC80: (1) SPDT relay LC82: (2) SPDT relays Contact rating: 250 VAC @ 10A Contact output: Selectable NO / NC Contact latch: LC80: N/A LC82: Selectable ON / OFF Contact delay: 0-60 seconds Ambient temp: F: -40° to 140° LC80-1001 C: -40° to 60° Enclosure type: 35mm DIN rail Enclosure mat.: PP, UL94VO Classification: General purpose Compliance: CE Application Features Approvals: CSA, LR 79326

The general purpose flow controller Fail-safe relay control of pumps or Top View is offered in two configurations valves with 0-60 second delay for low-flow pump and process 3 ( mm) protection. The LC80 accepts one Easy setup with LED indicators for

sensor, power and relay status IRT Y IRT Y flow sensor input and provides POW R one 10A relay for low flow control. -- 35 mm DIN rail mount polypropylene RY 1RY 2 STANDARD CONTROLLER The LC82 accepts two flow sensor 1 2 enclosure with removable terminal (44mm) ( mm) TC inputs and provides two 10A relays IPT 1 IPT 2 IPT 2B strips OO for dual low flow control. Package this flow controller with our liquid or Invert switch changes relay state gas flow switch sensors. For field from NO to NC without rewiring mount installation, add a single or dual controller NEMA box. Side View

Flow Switches I Rl 3mm Package the controller with our liquid or gas flow switch sensors. 31 ( mm) See pages 77 and 79 3 ( 2mm) for more details. LM94-1001

Thermo-Flo

Ordering Notes LC8 -1001 1) The flow controller is compatible with Thermo-Flo liquid and gas flow sensors. Contact(s) / input(s) (1) (2) 2) For field mount installation in a NEMA 4X 0 1 Relay / 1 sensor polycarbonate enclosure, order the LM94-1001 2 2 Relays / 2 sensors (single controller box) or the LM95-1001 (two controller box).

81 www.flowline.com Email UsFax: | [email protected] 81 We Do Your Level Best We Do Your Level Best Fittings SmartTM Trak™ Installation Fitting

Application Specifications

The adjustable multi-point fitting enables users to install Fitting and adjust up to four Flowline level switches to any depth Track lengths: US: 2', 4', 6', 8', 10' along the entire length of track. The fitting is typically Metric: 1m, 2m, 3m Adjustability: Entire track length applied in atmospheric day tanks, process vessels and Mixing velocity: < 1.5 fps (.45 mps) waste sumps. Select the appropriate track length based Process temp.: F: -40˚ to 176˚ upon your tank height and add one sensor car kit for each C: -40˚ to 80˚ Pressure: Atmospheric sensor to be installed on Smart Trak. Fitting material: PP (20% glass fill) Process mount: 1_01: 2" NPT 1_61: 2" G Features Mount. gasket: Viton®

Adjustable level sensor cars make PP Junction Box setup or changes fast and simple 137 5S Sensor inputs: 1-4 sensors

Terminal strip: 12 pole socket Standard track lengths are easily PP Enclosure rating: NEMA 4X (IP65)

cut to applied length in the field 137 Encl. material: PP, UL94VO * Encl. rotation: 300˚ swivel base Conduit entrance: Single, 1/2" NPT Rugged polypropylene construction for Temp. rating: F: -40˚ to 158˚ use with challenging corrosive liquids C: -40˚ to 70˚ PP

Side Mount Track Kit PP Bracket material: PP Female threads: 1001: 2" NPT Track kits are offered in 1051: 2" G standard lengths with a Tank installation: Bolt or plastic weld 2” process mount and

3/4” nipple for a Flowline 6WDQGDUG7UDFN/HQJWKV controller or junction box. Car Kit Typical Assembly The heart of the fitting is the adjustable sensor car. Each kit includes a 3/4” car with track mounting LM10-1201 hardware. Order one car PP kit for each level sensor. LM30-1001 Smart Trak

Ordering Notes LM10-1 1 1) Select the appropriate US or Metric track length based upon the maximum sensor depth and/or Track length (1) (2) (3) application tank height. Standard track lengths US Metric may be cut to custom lengths in the field. 2 24" (61 cm) 1 100 cm (39.4") 2) Each track is provided with one 2" plug fitting 4 48" (122 cm) 3 200 cm (78.7") less the required sensor cars. 6 72" (183 cm) 7 300 cm (118.1") 3) Order one LM30-1001 (3/4" NPT) or LM30-1051 8 96" (244 cm) 0 120" (305 cm) (3/4" Rp) sensor car kit for each level sensor Process mount (4) (5) to be installed on Smart Trak. 0 NPT (US) 4) For integral wiring and/or conduit termination, 6 G (Metric) order one LC05-1001 (NPT) or LC05-1051 (Rp) compact junction box. IP 5) For installation on open tanks, order the LM50-1001 65 LM50-1001 (2" NPT) or LM50-1061 (2" G) side mount bracket.

82 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Switch-Pak™ Installation Fitting Fittings

Application Specifications

The single-point fitting enables users to install and extend Fitting a Flowline level switch through the top wall of the tank. Length: 6" to 10' Offered in PVC, PP and PVDF materials, the fitting is typi- (15 cm to 3m) Process temp.: F: -40˚ to 176˚ cally applied in bulk storage tanks, day tanks and waste C: -40˚ to 80˚ sumps. Each fitting is built custom to your requirements. Pressure: 150 psi (10 bar) @ 25˚ Select the appropriate material based upon your applica- C., derated @ 1.667 tion liquid and specify the A-dimension, taking into consid- psi (.113 bar) per ˚C above 25˚ C eration the installed sensor length. Fitting material: 70_1: PVC 10_1: PP 50_1: PVDF PP Process mount: _001: 2" NPT _061: 1.5" G Features 137

5S Mount. gasket: Viton® PP Thermal or solvent welded fitting is Sensor adapter: 3/4" NPT (3/4" Rp)

built to your switch insertion length 137 * Offered in PVDF, PP and PVC Junction Box Sensor inputs: 1 sensor material for maximum chemical Terminal strip: 6 pole socket compatibility Enclosure rating: NEMA 4X (IP65) Encl. material: PP, UL94VO Encl. rotation: 300˚ swivel base Conduit entrance: Single, 1/2" NPT Temp. rating: F: -40˚ to 158˚

Tech Tip $ 6SHFLI\ C: -40˚ to 70˚ For easy field assembly, order the LM45- 7001.0000 PVC plug fitting and adapter. LM45-1001 Then solvent weld a 3/4” PVC schedule Side Mount 40 pipe between the parts. Bracket material: PP Female threads: 1001: 2" NPT 1051: 2" G PVC = LM45-7001.0000 Tank installation: Bolt or plastic weld PP = LM45-1001.0000 137 5S PVDF = LM45-5001.0000

IP 65 Switch-Pak

Ordering Notes LM45- 0 1- 1) For integral wiring and/or conduit termination, order one LC06-1001 (NPT) or LC06-1051 (Rp) Fitting material compact junction box. 1 PP 2) For installation on open tanks, order the 5 PVDF LM50-1001 (2" NPT), LM50-1061 (2" G), or 7 PVC LM50-1001-1 side mount bracket. Process / sensor mount (1) (2) 3) Specify the A-dimension at the end of the part 0 2" NPT / 3/4" NPT (US) 6 1 1/2" G / 3/4" Rp (Metric) number (ie: LM45-1001-17"). The A-dimension Dimensions (3) (4) may be specified in 1/2" (1.3 cm) increments A Specify (PP) from 6" to 10' (15 cm to 3m). Switch-Pak will (PVDF) PP be solvent (PVC) or socket welded (PP and PP PVDF) per your length specification. 4) To order the plug fitting and 3/4" sensor adapter unassembled (without a 25 mm pipe) specify a

zero A-dimension at the end of the part number PP PP 137 (ie: LM45-1001.0000). * PP LM50-1001

83 www.flowline.com Email UsFax: | [email protected] 83 We Do Your Level Best We Do Your Level Best Fittings TM Parts & Accessories

Single & Two Indicator NEMA Box Flange

P/N Description P/N Description

LM91-1001 Single Indicator, Non-Windowed, 1/8 DIN, PC LM52-1850 1” Flange - 150 # (Sch. 80), PVC LM91-2001 Two Indicator, Non-Windowed, 1/8 DIN, PC LM52-2850 2” Flange - 150 # (Sch. 80), PVC LM92-1001 Single Indicator, Windowed, 1/8 DIN, PC LM52-3850 3” Flange - 150 # (Sch. 80), PVC LM93-1001 Two Indicator, Windowed, 1/8 DIN, PC Fob USB® Adapter for WebCal Software Single & Two Controller NEMA Box P/N Description P/N Description LI99-1001 Fob USB® Adapter for WebCal LM94-1001 Single Controller, Windowed, 35mm Rail, PC LM95-1001 Two Controller, Windowed, 35mm Rail, PC Intrinsic Safety Barrier AC-DC Power Supply P/N Description

P/N Description LB11-1001 Safety Barrier for LU20-5001-IS, LD31-SXX1 & LD32-SXX1 LC95-1001 110-240 VAC / 24 VDC @ 0.60A, 35mm Rail

DataView Expansion Card Reducer Bushing (Thread x Thread) P/N Description P/N Description LI56-1011 4-20 mA Repeater LM52-1400 2” NPT x 1” NPT Thread (Sch. 40), PVC LI56-1201 2 Relay (No Repeater) LM52-2400 3” NPT x 2” NPT Thread (Sch. 40), PVC LI56-1211 2 Relay with 4-20 mA Repeater LM52-1800 2” NPT x 1” NPT Thread (Sch. 80), PVC LI56-1401 4 Relay (No Repeater) LM52-2800 3” NPT x 2” NPT Thread (Sch. 80), PVC LI56-1411 4 Relay with 4-20 mA Repeater LM52-3800 4” NPT x 2” NPT Thread (Sch. 80), PVC Submersible Pressure Mounting Kit Reducer Bushing (Socket x Thread) P/N Description P/N Description LD90-1001 Junction Box, Term-Strip, 2” NPT, PP LM52-1410 2” Socket x 1” NPT Thread (Sch. 40), PVC LD90-1061 Junction Box, Term-Strip, 2” G, PP LM52-2410 3” Socket x 2” NPT Thread (Sch. 40), PVC LD90-5001 Junction Box, Term-Strip, 2” NPT, PVDF LM52-3410 4” Socket x 2” NPT Thread (Sch. 40), PVC LD90-5061 Junction Box, Term-Strip, 2” G, PVDF LM52-1810 2” Socket x 1” NPT Thread (Sch. 80), PVC LM52-2810 3” Socket x 2” NPT Thread (Sch. 80), PVC LM52-3810 4” Socket x 2” NPT Thread (Sch. 80), PVC Ultrasonic Sensor Mounting Gasket

P/N Description Bulkhead Fitting 200128 1” Gasket (1.25m Range), Viton® P/N Description 200129 1” Gasket (3m Range), Viton® 204038 2” Gasket (5.5m/8m/10m Range), Viton® LM52-1890 1” Low-Profile Bulkhead Fitting (PVC) LM52-2890 2” Low-Profile Bulkhead Fitting (PVC) LM52-3890 3” Low-Profile Bulkhead Fitting (PVC) Non-Intrusive Capacitance Bracket

P/N Description Side-Mount Bracket LP95-1001 Mounting Bracket, PE P/N Description LP95-6001 Mounting Bracket, PP LP95-5001 Mounting Bracket, PVDF LM50-1001-1 2” NPT Bracket with 2” x 1” NPT Reducer Switch not LM50-1001 2” NPT Bracket, PP included LM50-1061 2” G Bracket, PP

84 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Part Number by Page & Price Index Reference

Page P/N Description Note Price

84 200128 1" Viton® Gasket For 100 KHz Transducer $10 84 200129 2" Viton® Gasket For 50 KHz Transducer $14 84 204038 1" Viton® Gasket For EchoPod Sensors $6 30 300400 Fluidwell™ XP Level Indicator $2,295 --- 996494 Round Enclosure Cap for Junction Box $20 78 AG12-1610 Thermo-Flo™ with Compact Flow Controller, Short, PP, w/Strobe, 3/4" NPT (1) $540 78 AG12-1614 Thermo-Flo™ with Compact Flow Controller, Short, PP, w/Strobe, 3/4" G (1) $545 78 AG12-1620 Thermo-Flo™ with Compact Flow Controller, Short, PP, 3/4" NPT (1)(2) $490 78 AG12-1624 Thermo-Flo™ with Compact Flow Controller, Short, PP, 3/4" G (1)(2) $495 78 AG12-3610 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, w/Strobe, 3/4" NPT (1) $650 78 AG12-3614 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, w/Strobe, 3/4" G (1) $655 78 AG12-3620 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, 3/4" NPT (1)(2) $600 78 AG12-3624 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, 3/4" G (1)(2) $605 78 AG14-1610 Thermo-Flo™ with Compact Flow Controller, Long, PP, w/Strobe, 3/4" NPT (1) $550 78 AG14-1614 Thermo-Flo™ with Compact Flow Controller, Long, PP, w/Strobe, 3/4" G (1) $555 78 AG14-1620 Thermo-Flo™ with Compact Flow Controller, Long, PP, 3/4" NPT (1)(2) $500 78 AG14-1624 Thermo-Flo™ with Compact Flow Controller, Long, PP, 3/4" G (1)(2) $505 78 AG14-3610 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, w/Strobe, 3/4" NPT (1) $660 78 AG14-3614 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, w/Strobe, 3/4" G (1) $665 78 AG14-3620 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, 3/4" NPT (1)(2) $610 78 AG14-3624 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, 3/4" G (1)(2) $615 79 AG17-1630 Thermo-Flo™ with Compact Junction Box, Short, PP, 3/4" NPT $345 79 AG17-1634 Thermo-Flo™ with Compact Junction Box, Short, PP, 3/4" G $350 79 AG17-3630 Thermo-Flo™ with Compact Junction Box, Short, PVDF, 3/4" NPT $455 79 AG17-3634 Thermo-Flo™ with Compact Junction Box, Short, PVDF, 3/4" G $460 79 AG18-1630 Thermo-Flo™ with Compact Junction Box, Long, PP, 3/4" NPT $355 79 AG18-1634 Thermo-Flo™ with Compact Junction Box, Lng, PP, 3/4" G $360 79 AG18-3630 Thermo-Flo™ with Compact Junction Box, Long, PVDF, 3/4" NPT $465 79 AG18-3634 Thermo-Flo™ with Compact Junction Box, Long, PVDF, 3/4" G $470 78 AT12-1610 Thermo-Flo™ with Compact Flow Controller, Short, PP, w/Strobe, 3/4" NPT (1) $530 78 AT12-1614 Thermo-Flo™ with Compact Flow Controller, Short, PP, w/Strobe, 3/4" G (1) $535 78 AT12-1620 Thermo-Flo™ with Compact Flow Controller, Short, PP, 3/4" NPT (1)(2) $480 78 AT12-1624 Thermo-Flo™ with Compact Flow Controller, Short, PP, 3/4" G (1)(2) $485 78 AT12-3610 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, w/Strobe, 3/4" NPT (1) $640 78 AT12-3614 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, w/Strobe, 3/4" G (1) $645 78 AT12-3620 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, 3/4" NPT (1)(2) $590 78 AT12-3624 Thermo-Flo™ with Compact Flow Controller, Short, PVDF, 3/4" G (1)(2) $595 78 AT14-1610 Thermo-Flo™ with Compact Flow Controller, Long, PP, w/Strobe, 3/4" NPT (1) $540 78 AT14-1614 Thermo-Flo™ with Compact Flow Controller, Long, PP, w/Strobe, 3/4" G (1) $545 78 AT14-1620 Thermo-Flo™ with Compact Flow Controller, Long, PP, 3/4" NPT (1)(2) $490 78 AT14-1624 Thermo-Flo™ with Compact Flow Controller, Long, PP, 3/4" G (1)(2) $495 78 AT14-3610 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, w/Strobe, 3/4" NPT (1) $650 78 AT14-3614 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, w/Strobe, 3/4" G (1) $655 78 AT14-3620 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, 3/4" NPT (1)(2) $600 78 AT14-3624 Thermo-Flo™ with Compact Flow Controller, Long, PVDF, 3/4" G (1)(2) $605 79 AT17-1630 Thermo-Flo™ with Compact Junction Box, Short, PP, 3/4" NPT $335

85 www.flowline.com Email UsFax: | [email protected] 85 We Do Your Level Best We Do Your Level Best Reference PartTM Number by Page & Price Index

Page P/N Description Note Price

79 AT17-1634 Thermo-Flo™ with Compact Junction Box, Short, PP, 3/4" G $340 79 AT17-3630 Thermo-Flo™ with Compact Junction Box, Short, PVDF, 3/4" NPT $445 79 AT17-3634 Thermo-Flo™ with Compact Junction Box, Short, PVDF, 3/4" G $450 79 AT18-1630 Thermo-Flo™ with Compact Junction Box, Long, PP, 3/4" NPT $345 79 AT18-1634 Thermo-Flo™ with Compact Junction Box, Lng, PP, 3/4" G $350 79 AT18-3630 Thermo-Flo™ with Compact Junction Box, Long, PVDF, 3/4" NPT $455 79 AT18-3634 Thermo-Flo™ with Compact Junction Box, Long, PVDF, 3/4" G $460 60 AU13-1110 Switch-Pro™ with Compact Level Controller, PP, w/Strobe, 3/4" NPT (1) $620 60 AU13-1114 Switch-Pro™ with Compact Level Controller, PP, w/Strobe, 3/4" G (1) $625 60 AU13-1120 Switch-Pro™ with Compact Level Controller, PP, 3/4" NPT (1)(2) $570 60 AU13-1124 Switch-Pro™ with Compact Level Controller, PP, 3/4" G (1)(2) $575 60 AU13-2110 Switch-Pro™ with Compact Level Controller, PFA, w/Strobe, 3/4" NPT (1) $730 60 AU13-2114 Switch-Pro™ with Compact Level Controller, PFA, w/Strobe, 3/4" G (1) $735 60 AU13-2120 Switch-Pro™ with Compact Level Controller, PFA, 3/4" NPT (1)(2) $680 60 AU13-2124 Switch-Pro™ with Compact Level Controller, PFA, 3/4" G (1)(2) $685 56 - 57 AU13-4213-A Switch-Pak™ with Compact Level Controller, PP, w/Strobe, 2" NPT (3)(4) $645 56 - 57 AU13-4217-A Switch-Pak™ with Compact Level Controller, PP, w/Strobe, 1-1/2" NPT (3)(4) $655 56 - 57 AU13-4223-A Switch-Pak™ with Compact Level Controller, PP, 2" NPT (3)(4)(5) $595 56 - 57 AU13-4227-A Switch-Pak™ with Compact Level Controller, PP, 1-1/2" NPT (3)(4)(5) $605 56 - 57 AU13-5213-A Switch-Pak™ with Compact Level Controller, PVDF, w/Strobe, 2" NPT (3)(4) $790 56 - 57 AU13-5217-A Switch-Pak™ with Compact Level Controller, PVDF, w/Strobe, 1-1/2" NPT (3)(4) $800 56 - 57 AU13-5223-A Switch-Pak™ with Compact Level Controller, PVDF, 2" NPT (3)(4)(5) $740 56 - 57 AU13-5227-A Switch-Pak™ with Compact Level Controller, PVDF, 1-1/2" NPT (3)(4)(5) $750 --- AU15-1130 Discontinued - Replaced with AU18-1130 ------AU15-1134 Discontinued - Replaced with AU18-1134 ------AU15-2130 Discontinued - Replaced with AU18-2130 ------AU15-2134 Discontinued - Replaced with AU18-2134 ------AU15-4243-A Discontinued - Replaced with AU18-4243-A ------AU15-4247-A Discontinued - Replaced with AU18-4247-A ------AU15-4343-A-B Discontinued - Replaced with AU18-4343-A ------AU15-4347-A-B Discontinued - Replaced with AU18-4347-A ------AU15-5243-A Discontinued - Replaced with AU18-5243-A ------AU15-5247-A Discontinued - Replaced with AU18-5247-A --- 61 AU18-1130 Switch-Pro™ with Compact Junction Box, SPST Relay, PP, 3/4" NPT $435 61 AU18-1134 Switch-Pro™ with Compact Junction Box, SPST Relay, PP, 3/4" G $440 61 AU18-2130 Switch-Pro™ with Compact Junction Box, SPST Relay, PFA, 3/4" NPT $545 61 AU18-2134 Switch-Pro™ with Compact Junction Box, SPST Relay, PFA, 3/4" G $550 58 - 59 AU18-4243-A Switch-Pak™ with Compact Junction Box, SPST Relay, PP, 2" NPT (3) $460 58 - 59 AU18-4247-A Switch-Pak™ with Compact Junction Box, SPST Relay, PP, 1-1/2" NPT (3) $470 52 - 53 AU18-4343-A-B Smart Trak™ with Compact Junction Box, 1 x SPST Relay, PP, 2" NPT (6) $495 52 - 53 AU18-4347-A-B Smart Trak™ with Compact Junction Box, 1 x SPST Relay, PP, 2" G (6) $495 58 - 59 AU18-5243-A Switch-Pak™ with Compact Junction Box, SPST Relay, IS, PFA, 2" NPT (3) $605 58 - 59 AU18-5247-A Switch-Pak™ with Compact Junction Box, SPST Relay, IS, PFA, 1-1/2" NPT (3) $615 50 - 51 AU23-4313-A-B-C Smart Trak™ with Compact Level Controller, PP, 2" NPT (6)(7)(8) $950 50 - 51 AU23-4317-A-B-C Smart Trak™ with Compact Level Controller, PP, 2" G (6)(7)(8) $950 50 - 51 AU23-4323-A-B-C Smart Trak™ with Compact Level Controller, w/Strobe, PP, 2" NPT (6)(7) $1,000

86 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Part Number by Page & Price Index Reference

Page P/N Description Note Price

50 - 51 AU23-4317-A-B-C Smart Trak™ with Compact Level Controller, PP, 2" G (6)(7)(8) $950 50 - 51 AU23-4323-A-B-C Smart Trak™ with Compact Level Controller, w/Strobe, PP, 2" NPT (6)(7) $1,000 50 - 51 AU23-4327-A-B-C Smart Trak™ with Compact Level Controller, w/Strobe, PP, 2" G (6)(7) $1,000 --- AU25-4343-A-B-C Discontinued - Replaced with AU28-4343-A ------AU25-4347-A-B-C Discontinued - Replaced with AU28-4347-A --- 52 - 53 AU28-4343-A-B-C Smart Trak™ with Compact Junction Box, 2 x SPST Relay, PP, 2" NPT (6) $795 52 - 53 AU28-4347-A-B-C Smart Trak™ with Compact Junction Box, 2 x SPST Relay, PP, 2" G (6) $795 --- AU35-4343-A-B-C-D Discontinued - Replaced with AU38-4343-A ------AU35-4347-A-B-C-D Discontinued - Replaced with AU38-4347-A --- 52 - 53 AU38-4343-A-B-C-D Smart Trak™ with Compact Junction Box, 3 x SPST Relay, PP, 2" NPT (6) $1,095 52 - 53 AU38-4347-A-B-C-D Smart Trak™ with Compact Junction Box, 3 x SPST Relay, PP, 2" G (6) $1,095 --- AU45-4343-A-B-C-D-E Discontinued - Replaced with AU48-4343-A ------AU45-4347-A-B-C-D-E Discontinued - Replaced with AU48-4347-A --- 52 - 53 AU48-4343-A-B-C-D-E Smart Trak™ with Compact Junction Box, 4 x SPST Relay, PP, 2" NPT (6) $1,395 52 - 53 AU48-4347-A-B-C-D-E Smart Trak™ with Compact Junction Box, 4 x SPST Relay, PP, 2" G (6) $1,395 56 - 57 AV13-4213-A Switch-Pak™ with Compact Level Controller, PP, w/Strobe, 2" NPT (3)(4) $480 56 - 57 AV13-4217-A Switch-Pak™ with Compact Level Controller, PP, w/Strobe, 1-1/2" NPT (3)(4) $490 56 - 57 AV13-4223-A Switch-Pak™ with Compact Level Controller, PP, 2" NPT (3)(4)(5) $430 56 - 57 AV13-4227-A Switch-Pak™ with Compact Level Controller, PP, 1-1/2" NPT (3)(4)(5) $440 56 - 57 AV13-5213-A Switch-Pak™ with Compact Level Controller, PVDF, w/Strobe, 2" NPT (3)(4) $625 56 - 57 AV13-5217-A Switch-Pak™ with Compact Level Controller, PVDF, w/Strobe, 1-1/2" NPT (3)(4) $635 56 - 57 AV13-5223-A Switch-Pak™ with Compact Level Controller, PVDF, 2" NPT (3)(4)(5) $575 56 - 57 AV13-5227-A Switch-Pak™ with Compact Level Controller, PVDF, 1-1/2" NPT (3)(4)(5) $585 58 - 59 AV16-4243-A Switch-Pak™ with Compact Junction Box, SPST Relay, PP, 2" NPT (3) $295 58 - 59 AV16-4247-A Switch-Pak™ with Compact Junction Box, SPST Relay, PP, 1-1/2" NPT (3) $305 52 - 53 AV16-4343-A-B Smart Trak™ with Compact Junction Box, 1 x SPST Relay, PP, 2" NPT (6) $330 52 - 53 AV16-4347-A-B Smart Trak™ with Compact Junction Box, 1 x SPST Relay, PP, 2" G (6) $330 58 - 59 AV16-5243-A Switch-Pak™ with Compact Junction Box, SPST Relay, IS, PVDF, 2" NPT (3) $440 58 - 59 AV16-5247-A Switch-Pak™ with Compact Junction Box, SPST Relay, IS, PVDF, 1-1/2" NPT (3) $450 54 - 55 AV16-S243-A-B Float-Point™ with Compact Junction Box, 1-Float, GP, Add $10/inch (9) $300 62 AV17-S101 Float-Point™ Compact Mount - High Alarm $350 62 AV17-S201 Float-Point™ Compact Mount - Low Alarm $350 62 AV17-S301 Float-Point™ Compact Mount - High & Low Alarms $470 62 AV17-S401 Float-Point™ Remote Mount - High Alarm $340 62 AV17-S501 Float-Point™ Remote Mount - Low Alarm $370 62 AV17-S601 Float-Point™ Remote Mount - High & Low Alarms $510 50 - 51 AV23-4313-A-B-C Smart Trak™ with Compact Level Controller, PP, 2" NPT (6)(7)(8) $620 50 - 51 AV23-4317-A-B-C Smart Trak™ with Compact Level Controller, PP, 2" G (6)(7)(8) $620 50 - 51 AV23-4323-A-B-C Smart Trak™ with Compact Level Controller, w/Strobe, PP, 2" NPT (6)(7) $670 50 - 51 AV23-4327-A-B-C Smart Trak™ with Compact Level Controller, w/Strobe, PP, 2" G (6)(7) $670 52 - 53 AV26-4343-A-B-C Smart Trak™ with Compact Junction Box, 2 x SPST Relay, PP, 2" NPT (6) $465 52 - 53 AV26-4347-A-B-C Smart Trak™ with Compact Junction Box, 2 x SPST Relay, PP, 2" G (6) $465 54 - 55 AV26-S243-A-B-C Float-Point™ with Compact Junction Box, 2-Floats, GP, Add $10/inch (9) $380 52 - 53 AV36-4343-A-B-C-D Smart Trak™ with Compact Junction Box, 3 x SPST Relay, PP, 2" NPT (6) $600 52 - 53 AV36-4347-A-B-C-D Smart Trak™ with Compact Junction Box, 3 x SPST Relay, PP, 2" G (6) $600 54 - 55 AV36-S243-A-B-C-D Float-Point™ with Compact Junction Box, 3-Floats, GP, Add $10/inch (9) $460

87 www.flowline.com Email UsFax: | [email protected] 87 We Do Your Level Best We Do Your Level Best Reference PartTM Number by Page & Price Index

Page P/N Description Note Price

52 - 53 AV46-4343-A-B-C-D-E Smart Trak™ with Compact Junction Box, 4 x SPST Relay, PP, 2" NPT (6) $735 52 - 53 AV46-4347-A-B-C-D-E Smart Trak™ with Compact Junction Box, 4 x SPST Relay, PP, 2" G (6) $735 54 - 55 AV46-S243-A-B-C-D-E Float-Point™ with Compact Junction Box, 4-Floats, GP, Add $10/inch (9) $540 54 - 55 AV56-S243-A-B-C-D-E-F Float-Point™ with Compact Junction Box, 5-Floats, GP, Add $10/inch (9) $620 60 AZ13-1110 Switch-Pro™ with Compact Level Controller, PP, w/Strobe, 3/4" NPT (1) $630 60 AZ13-1114 Switch-Pro™ with Compact Level Controller, PP, w/Strobe, 3/4" G (1) $635 60 AZ13-1120 Switch-Pro™ with Compact Level Controller, PP, 3/4" NPT (1)(2) $580 60 AZ13-1124 Switch-Pro™ with Compact Level Controller, PP, 3/4" G (1)(2) $585 56 - 57 AZ13-4213-A Switch-Pak™ with Compact Level Controller, PP, w/Strobe, 2" NPT (3)(4) $665 56 - 57 AZ13-4217-A Switch-Pak™ with Compact Level Controller, PP, w/Strobe, 1-1/2" NPT (3)(4) $675 56 - 57 AZ13-4223-A Switch-Pak™ with Compact Level Controller, PP, 2" NPT (3)(4)(5) $615 56 - 57 AZ13-4227-A Switch-Pak™ with Compact Level Controller, PP, 1-1/2" NPT (3)(4)(5) $625 61 AZ18-1130 Switch-Pro™ with Compact Junction Box, SPST Relay, PP, 3/4" NPT $445 61 AZ18-1134 Switch-Pro™ with Compact Junction Box, SPST Relay, PP, 3/4" G $450 52 - 53 AZ18-4243-A Switch-Pak™ with Compact Junction Box, SPST Relay, PP, 2" NPT (3) $480 52 - 53 AZ18-4247-A Switch-Pak™ with Compact Junction Box, SPST Relay, PP, 1-1/2" NPT (3) $490 52 - 53 AZ18-4343-A-B Smart Trak™ with Compact Junction Box, 1 x SPST Relay, PP, 2" NPT (6) $515 52 - 53 AZ18-4347-A-B Smart Trak™ with Compact Junction Box, 1 x SPST Relay, PP, 2" G (6) $535 50 - 51 AZ23-4313-A-B-C Smart Trak™ with Compact Level Controller, PP, 2" NPT (6)(7)(8) $990 50 - 51 AZ23-4317-A-B-C Smart Trak™ with Compact Level Controller, PP, 2" G (6)(7)(8) $990 50 - 51 AZ23-4323-A-B-C Smart Trak™ with Compact Level Controller, w/Strobe, PP, 2" NPT (6)(7) $1,040 50 - 51 AZ23-4327-A-B-C Smart Trak™ with Compact Level Controller, w/Strobe, PP, 2" G (6)(7) $1,040 52 - 53 AZ28-4343-A-B-C Smart Trak™ with Compact Junction Box, 2 x SPST Relay, PP, 2" NPT (6) $835 52 - 53 AZ28-4347-A-B-C Smart Trak™ with Compact Junction Box, 2 x SPST Relay, PP, 2" G (6) $835 52 - 53 AZ38-4343-A-B-C-D Smart Trak™ with Compact Junction Box, 3 x SPST Relay, IS, 2" NPT (6) $1,155 52 - 53 AZ38-4347-A-B-C-D Smart Trak™ with Compact Junction Box, 3 x SPST Relay, PP, 2" G (6) $1,155 52 - 53 AZ48-4343-A-B-C-D-E Smart Trak™ with Compact Junction Box, 4 x SPST Relay, PP, 2" NPT (6) $1,475 52 - 53 AZ48-4347-A-B-C-D-E Smart Trak™ with Compact Junction Box, 4 x SPST Relay, PP, 2" G (6) $1,475 18 DL10-00 EchoPod® Ultrasonic Level Transmitter, 1.25m range, 1" NPT $305 18 DL10-01 EchoPod® Ultrasonic Level Transmitter, 1.25m range, 1" NPT, w/Fob Bundle $350 18 DL10-10 EchoPod® Ultrasonic Level Transmitter, 1.25m range, 1" G $310 18 DL10-11 EchoPod® Ultrasonic Level Transmitter, 1.25m range, 1" G, w/Fob Bundle $355 14 DL14-00 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 1.25m range, 1" NPT $350 14 DL14-01 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 1.25m range, 1" NPT, w/Fob Bundle $395 14 DL14-10 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 1.25m range, 1" G $355 14 DL14-11 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 1.25m range, 1" G, w/Fob Bundle $400 15 DL24-00 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 3m range, 1" NPT $450 15 DL24-01 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 3m range, 1" NPT, w/Fob Bundle $495 15 DL24-10 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 3m range, 1" G $455 15 DL24-11 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 3m range, 1" G, w/Fob Bundle $500 16 DL34-00 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 5.0m range, 1" NPT $550 16 DL34-01 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 5.0m range, 1" NPT, w/Fob Bundle $595 16 DL34-10 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 5.0m range, 1" G $555 16 DL34-11 EchoPod® Ultrasonic Level Transmitter, Switch & Controller, 5.0m range, 1" G, w/Fob Bundle $600 17 DS14-00 EchoPod® Ultrasonic Level Switch & Controller, 1.25m range, 1" NPT $330 17 DS14-01 EchoPod® Ultrasonic Level Switch & Controller, 1.25m range, 1" NPT, w/Fob Bundle $375

88 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Part Number by Page & Price Index Reference

Page P/N Description Note Price

17 DS14-10 EchoPod® Ultrasonic Level Switch & Controller, 1.25m range, 1" G $335 17 DS14-11 EchoPod® Ultrasonic Level Switch & Controller, 1.25m range, 1" G, w/Fob Bundle $380 19 DX10-00 EchoPod® Ultrasonic Level Sensor (Voltage or Frequency), 1.25m range, 1" NPT $280 19 DX10-01 EchoPod® Ultrasonic Level Sensor (Voltage or Frequency), 1.25m range, 1" NPT w/Fob Bundle $325 19 DX10-10 EchoPod® Ultrasonic Level Sensor (Voltage or Frequency), 1.25m range, 1" G $285 19 DX10-11 EchoPod® Ultrasonic Level Sensor (Voltage or Frequency), 1.25m range, 1" G w/Fob Bundle $330 77 FT10-1305 Thermo-Flo™ Liquid Flow Switch, PP, Short, 3/4" NPT (10)(11) $185 77 FT10-1325 Thermo-Flo™ Liquid Flow Switch, PP, Short, 3/4" G (10)(11) $190 77 FT10-1405 Thermo-Flo™ Liquid Flow Switch, PP, Long, 3/4" NPT (10)(11) $195 77 FT10-1425 Thermo-Flo™ Liquid Flow Switch, PP, Long, 3/4" G (10)(11) $200 77 FT10-5305 Thermo-Flo™ Liquid Flow Switch, PVDF, Short, 3/4" NPT (10)(11) $295 77 FT10-5325 Thermo-Flo™ Liquid Flow Switch, PVDF, Short, 3/4" G (10)(11) $300 77 FT10-5405 Thermo-Flo™ Liquid Flow Switch, PVDF, Long, 3/4" NPT (10)(11) $305 77 FT10-5425 Thermo-Flo™ Liquid Flow Switch, PVDF, Long, 3/4" G (10)(11) $310 77 FT50-1000 Pulse-Point™ Liquid Flow Switch Fitting, PP $50 77 FT50-5000 Pulse-Point™ Liquid Flow Switch Fitting, PVDF $90 77 GT10-1305 Thermo-Flo™ Gas Flow Switch, PP, Short, 3/4" NPT (10)(11) $195 77 GT10-1325 Thermo-Flo™ Gas Flow Switch, PP, Short, 3/4" G (10)(11) $200 77 GT10-1405 Thermo-Flo™ Gas Flow Switch, PP, Long, 3/4" NPT (10)(11) $205 77 GT10-1425 Thermo-Flo™ Gas Flow Switch, PP, Long, 3/4" G (10)(11) $210 77 GT10-5305 Thermo-Flo™ Gas Flow Switch, PVDF, Short, 3/4" NPT (10)(11) $305 77 GT10-5325 Thermo-Flo™ Gas Flow Switch, PVDF, Short, 3/4" G (10)(11) $310 77 GT10-5405 Thermo-Flo™ Gas Flow Switch, PVDF, Long, 3/4" NPT (10)(11) $315 77 GT10-5425 Thermo-Flo™ Gas Flow Switch, PVDF, Long, 3/4" G (10)(11) $320 --- LB10-1001 Discontinued - Replaced with LB11-1001 --- 84 LB11-1001 Intrinsic Safety Barrier $695 75 LC05-1001 Compact Junction Box, 1-4 Sensor Junction Box, Term-Strip, 3/4" NPT, PP $70 75 LC05-1051 Compact Junction Box, 1-4 Sensor Junction Box, Term-Strip, 3/4" Rp, PP $70 75 LC06-1001 Compact Junction Box, 1-2 Sensor Junction Box, Term-Strip, 3/4" NPT, PP $60 75 LC06-1051 Compact Junction Box, 1-2 Sensor Junction Box, Term-Strip, 3/4" Rp, PP $60 72 LC09-1004 Strobe Alert™ Compact Flash Alarm, 12-36 VDC, PC $120 74 LC10-1001 Comp. Level Cont., 1 Relay, 1 Sensor, 3/4" NPT, Cont. only (14)(15) $195 74 LC10-1002 Comp. Level Cont., 1 Relay, 1 Sensor, 3/4" NPT, Cont. w/Strobe (14) $245 72 LC10-1004 Strobe Alert™ Compact Flash Alarm, 120 VAC, PC $120 72 LC10-1004-E Strobe Alert™ Compact Flash Alarm, 240 VAC, PC $120 74 LC10-1051 Compact Level Controller, 1 Relay, 1 Sensor, 3/4" Rp, Controller only (14)(15) $195 74 LC10-1052 Compact Level Controller, 1 Relay, 1 Sensor, 3/4" Rp, Controller w/Strobe (14) $245 74 LC11-1001 Compact Level Controller, 1 Latch. Relay, 2 Sensors, 3/4" NPT, Controller only (14)(15) $225 74 LC11-1002 Compact Level Controller, 1 Latch. Relay, 2 Sensors, 3/4" NPT, w/Strobe (14) $275 74 LC11-1051 Compact Level Controller, 1 Latch. Relay, 2 Sensors, 3/4" Rp, Controller only (14)(15) $225 74 LC11-1052 Compact Level Controller, 1 Latch. Relay, 2 Sensors, 3/4" Rp, w/Strobe (14) $275 80 LC30-1001 Compact Flow Controller, 3/4" NPT, Controller only (14)(15) $205 80 LC30-1002 Compact Flow Controller, 3/4" NPT, Controller w/Strobe Alert (14) $255 80 LC30-1051 Compact Flow Controller, 3/4" Rp, Controller only (14)(15) $205 80 LC30-1052 Compact Flow Controller, 3/4" Rp, Controller w/Strobe Alert (14) $255 73 LC40-1001 Remote Level Controller, Gen-Purpose, 1 Relay, 1 Sensor (14)(15) $195

89 www.flowline.com Email UsFax: | [email protected] 89 We Do Your Level Best We Do Your Level Best Reference PartTM Number by Page & Price Index

Page P/N Description Note Price

73 LC41-1001 Remote Level Controller, Gen-Purpose, 1 Latch. Relay, 1 Sensor (14)(15) $225 73 LC42-1001 Remote Level Controller, Gen-Purpose, 2 Relays (1 Latching), 3 Sensors (14)(15) $275 45 LC52-1001 DataPoint™ Remote Level Controller (14) $345 81 LC80-1001 Remote Flow Controller, 1 Relay, 1 Sensor (14)(15) $205 81 LC82-1001 Remote Flow Controller, 2 Relays, 2 Sensor (14)(15) $285 73 LC90-1001 Remote Level Controller, Isolation, 1 Relay, 1 Sensor (14) $320 73 LC92-1001 Remote Level Controller, Isolation, 2 Relays (1 Latching), 3 Sensors (14) $420 84 LC95-1001 Power Supply, 100-240 VAC, 24 VDC @ 0.60A, 35mm Rail $265 38 LD30-S001 DeltaSpan™ Level Transmitter, 11.55' wc (5 psi), Cable $300 38 LD30-S011 DeltaSpan™ Level Transmitter, 11.55' wc (5 psi), Junction box $290 38 LD30-S201 DeltaSpan™ Level Transmitter, 34.65' wc (15 psi), Cable $315 38 LD30-S211 DeltaSpan™ Level Transmitter, 34.65' wc (15 psi), Junction box $305 38 LD30-S401 DeltaSpan™ Level Transmitter, 69.30' wc (30 psi), Cable $330 38 LD30-S411 DeltaSpan™ Level Transmitter, 69.30' wc (30 psi), Junction box $320 39 LD31-S101 DeltaSpan™, Water & oil, Polyurethane, 11.55' wc (5 psi) (23) $700 39 LD31-S111 DeltaSpan™, Water & oil, Polyurethane, 23.10' wc (10 psi) (23) $725 39 LD31-S121 DeltaSpan™, Water & oil, Polyurethane, 34.65' wc (15 psi) (23) $750 39 LD31-S131 DeltaSpan™, Water & oil, Polyurethane, 46.20' wc (20 psi) (23) $775 39 LD31-S201 DeltaSpan™, Water & oil, ETFE, 11.55' wc (5 psi) (23) $900 39 LD31-S211 DeltaSpan™, Water & oil, ETFE, 23.10' wc (10 psi) (23) $950 39 LD31-S221 DeltaSpan™, Water & oil, ETFE, 34.65' wc (15 psi) (23) $1,050 39 LD31-S231 DeltaSpan™, Water & oil, ETFE, 46.20' wc (20 psi) (23) $1,100 28 LD31-S301 DeltaSpan™, Intrinsically Safe, Water & oil, Polyurethane, 11.55' wc (5 psi) $900 28 LD31-S311 DeltaSpan™, Intrinsically Safe, Water & oil, Polyurethane, 23.10' wc (10 psi) $925 28 LD31-S321 DeltaSpan™, Intrinsically Safe, Water & oil, Polyurethane, 34.65' wc (15 psi) $950 28 LD31-S331 DeltaSpan™, Intrinsically Safe, Water & oil, Polyurethane, 46.20' wc (20 psi) $975 28 LD31-S401 DeltaSpan™, Intrinsically Safe, Water & oil, ETFE, 11.55' wc (5 psi) $1,100 28 LD31-S411 DeltaSpan™, Intrinsically Safe, Water & oil, ETFE, 23.10' wc (10 psi) $1,150 28 LD31-S421 DeltaSpan™, Intrinsically Safe, Water & oil, ETFE, 34.65' wc (15 psi) $1,250 28 LD31-S431 DeltaSpan™, Intrinsically Safe, Water & oil, ETFE, 46.20' wc (20 psi) $1,300 39 LD32-S101 DeltaSpan™, Waste & slurry, Polyurethane, 11.55' wc (5 psi) (23) $1,050 39 LD32-S111 DeltaSpan™, Waste & slurry, Polyurethane, 23.10' wc (10 psi) (23) $1,100 39 LD32-S121 DeltaSpan™, Waste & slurry, Polyurethane, 34.65' wc (15 psi) (23) $1,150 39 LD32-S131 DeltaSpan™, Waste & slurry, Polyurethane, 46.20' wc (20 psi) (23) $1,200 39 LD32-S201 DeltaSpan™, Waste & slurry, ETFE, 11.55' wc (5 psi) (23) $1,250 39 LD32-S211 DeltaSpan™, Waste & slurry, ETFE, 23.10' wc (10 psi) (23) $1,300 39 LD32-S221 DeltaSpan™, Waste & oil, ETFE, 0 to 34.65' wc (15 psi) (23) $1,400 39 LD32-S231 DeltaSpan™, Waste & slurry, ETFE, 46.20' wc (20 psi) (23) $1,450 29 LD32-S301 DeltaSpan™, Intrinsically Safe, Waste & slurry, Polyurethane, 11.55' wc (5 psi) $1,250 29 LD32-S311 DeltaSpan™, Intrinsically Safe, Waste & slurry, Polyurethane, 23.10' wc (10 psi) $1,300 29 LD32-S321 DeltaSpan™, Intrinsically Safe, Waste & slurry, Polyurethane, 34.65' wc (15 psi) $1,350 29 LD32-S331 DeltaSpan™, Intrinsically Safe, Waste & slurry, Polyurethane, 46.20' wc (20 psi) $1,400 29 LD32-S401 DeltaSpan™, Intrinsically Safe, Waste & slurry, ETFE, 11.55' wc (5 psi) $1,450 29 LD32-S411 DeltaSpan™, Intrinsically Safe, Waste & slurry, ETFE, 23.10' wc (10 psi) $1,500 29 LD32-S421 DeltaSpan™, Intrinsically Safe, Waste & oil, ETFE, 34.65' wc (15 psi) $1,600 29 LD32-S431 DeltaSpan™, Intrinsically Safe, Waste & slurry, ETFE, 46.20' wc (20 psi) $1,650

90 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Part Number by Page & Price Index Reference

Page P/N Description Note Price

39 LD34-S101 DeltaSpan™, Small Bore, Polyurethane, 11.55' wc (5 psi) $775 39 LD34-S111 DeltaSpan™, Small Bore, Polyurethane, 15' wc (6.5 psi) $800 39 LD34-S121 DeltaSpan™, Small Bore, Polyurethane, 20' wc (8.6 psi) $825 39 LD34-S131 DeltaSpan™, Small Bore, Polyurethane, 30' wc (13 psi) $850 39 LD34-S141 DeltaSpan™, Small Bore, Polyurethane, 50' wc (21.6 psi) $900 39 LD34-S151 DeltaSpan™, Small Bore, Polyurethane, 100' wc (43.3 psi) $1,000 84 LD90-1001 Junction Box, Term-Strip, 2" NPT Plug, PP $160 84 LD90-1061 Junction Box, Term-Strip, 2" G Plug, PP $160 84 LD90-5001 Junction Box, Term-Strip, 2" NPT Plug, PVDF $180 84 LD90-5061 Junction Box, Term-Strip, 2" G Plug, PVDF $180 69 LH25-1201 Switch-Tek™ Mini-Horizontal Float Level Switch, PP $24 69 LH25-1401 Switch-Tek™ Mini-Horizontal Float Level Switch, PP w/Slosh Shield $84 69 LH25-5401 Switch-Tek™ Mini-Horizontal Float Level Switch, PVDF w/Slosh Shield $150 71 LH29-1001 Switch-Tek™ Interstitial Leak Detector $195 70 LH35-S201 Switch-Tek™ Horizontal High-Temp Float Level Switch, 500 psi (34.5 bar) $225 42 LI25-1001 DataLoop™ Level Indicator, General Purpose $345 42 LI25-1001-BO DataLoop™ Level Indicator, General Purpose, Battery Powered in NEMA 4X Enclosure $995 31 LI25-2001 DataLoop™ Level Indicator, Intrinsically Safe $545 43 LI55-1001 DataView™, Controller only, No repeater $505 43 LI55-1011 DataView™, Controller only, 4-20 mA repeater $605 43 LI55-1201 DataView™, Controller w/2 Relays, No repeater $570 43 LI55-1211 DataView™, Controller w/2 Relays, 4-20 repeater $680 43 LI55-1401 DataView™, Controller w/4 Relays, No repeater $665 43 LI55-1411 DataView™, Controller w/4 Relays, 4-20 mA repeater $745 43 LI55-8001 DataView™, Controller only, No repeater, 12-24 VDC powered $605 43 LI55-8011 DataView™, Controller only, 4-20 mA repeater, 12-24 VDC powered $705 43 LI55-8201 DataView™, Controller w/2 Relays, No repeater, 12-24 VDC powered $670 43 LI55-8211 DataView™, Controller w/2 Relays, 4-20 repeater, 12-24 VDC powered $780 43 LI55-8401 DataView™, Controller w/4 Relays, No repeater, 12-24 VDC powered $765 43 LI55-8411 DataView™, Controller w/4 Relays, 4-20 mA repeater, 12-24 VDC powered $845 84 LI56-1011 Replacement 4-20 mA Repeater Card $130 84 LI56-1201 Replacement 2 Relay Card $90 84 LI56-1211 Replacement 2 Relay with 4-20 mA Repeater Card $210 84 LI56-1400 Replacement 4 SPST Expansion Module $170 84 LI56-1401 Replacement 4 Relay Card $170 84 LI56-1411 Replacement 4 Relay with 4-20 mA Repeater Card $290 84 LI56-1440 4 Digital Input / 4 Outputs Expansion Module $80 44 LI90-1001 Commander™ Multi-Tank Level Controller $995 84 LI99-1001 FOB USB Adapter for WebCal Software $50 82 LM10-1001 Smart Trak™, 10' Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $180 82 LM10-1061 Smart Trak™, 10' Track, 2" G Plug, 3/4" Rp Nipple, PP (16)(17) $185 82 LM10-1101 Smart Trak™, 1m Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $80 82 LM10-1161 Smart Trak™, 1m Track, 2" G Plug, 3/4" Rp Nipple, PP (16)(17) $85 82 LM10-1201 Smart Trak™, 2' Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $60 82 LM10-1261 Smart Trak™, 2' Track, 2" G Plug, 3/4" Rp Nipple, PP (16)(17) $65 82 LM10-1301 Smart Trak™, 2m Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $130

91 www.flowline.com Email UsFax: | [email protected] 91 We Do Your Level Best We Do Your Level Best Reference PartTM Number by Page & Price Index

Page P/N Description Note Price

82 LM10-1361 Smart Trak™, 2m Track, 2" G Plug, 3/4" RP Nipple, PP (16)(17) $135 82 LM10-1401 Smart Trak™, 4' Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $90 82 LM10-1461 Smart Trak™, 4' Track, 2" G Plug, 3/4" Rp Nipple, PP (16)(17) $95 82 LM10-1601 Smart Trak™, 6' Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $120 82 LM10-1661 Smart Trak™, 6' Track, 2" G Plug, 3/4" Rp Nipple, PP (16)(17) $125 82 LM10-1701 Smart Trak™, 3m Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $180 82 LM10-1761 Smart Trak™, 3m Track, 2" G Plug, 3/4" Rp Nipple, PP (16)(17) $185 82 LM10-1801 Smart Trak™, 8' Track, 2" NPT Plug, 3/4" NPT Nipple, PP (16)(17) $150 82 LM10-1861 Smart Trak™, 8' Track, 2" G Plug, 3/4" Rp Nipple, PP (16)(17) $155 82 LM30-1001 Switch Car Kit, 3/4" NPT, PP $25 82 LM30-1061 Switch Car Kit, 3/4" Rp, PP $25 82 LM40-1001 Smart Trak™, Plug Fitting Only-2" NPT $35 82 LM40-1061 Smart Trak™, Plug Fitting Only-2" G $35 83 LM45-1001 Switch Pak™, 2" NPT Plug, 3/4" NPT Adapter & Nipple, PP (18)(19) $35 83 LM45-1061 Switch Pak™, 1-1/2" NPT Plug, 3/4" Rp Adapter & Nipple, PP (18)(19) $40 83 LM45-5001 Switch Pak™, 2" NPT Plug, 3/4" NPT Adapter & Nipple, PVDF (18)(19) $70 83 LM45-5061 Switch Pak™, 1-1/2" NPT Plug, 3/4" Rp Adapter & Nipple, PVDF (18)(19) $75 83 LM45-7001 Switch Pak™, 2" NPT Plug, 3/4" NPT Adapter & Nipple, PVC (18)(19) $33 83 LM45-7061 Switch Pak™, 1-1/2" NPT Plug, 3/4" Rp Adapter & Nipple, PVC (18)(19) $38 84 LM50-1001 Side Mount Bracket, 2" NPT Bracket, PP $35 84 LM50-1001-1 Side Mount Bracket, 1" NPT Bracket, PP, includes PVC reducer bushing $45 84 LM50-1001-3/4 Side Mount Bracket, 3/4" NPT Bracket, PP, includes PVC reducer bushing $45 84 LM50-1061 Side Mount Bracket, 2" G Bracket, PP $35 84 LM52-1001 Reducer Bushing, 2" NPT Thread x 1" NPT Thread (Sch. 40), PVC $14 84 LM52-1400 Reducer Bushing, 2" NPT Thread x 1" NPT Thread (Sch. 40), PVC $14 84 LM52-1410 Reducer Bushing, 2" Slip x 1" NPT Thread (Sch. 40), PVC $8 84 LM52-1800 Reducer Bushing, 2" NPT Thread x 1" NPT Thread (Sch. 80), PVC $35 84 LM52-1810 Reducer Bushing, 2" Slip x 1" NPT Thread (Sch. 80), PVC $30 84 LM52-1850 Flange, 1" NPT Flange - 150# (Sch. 80), PVC $45 84 LM52-1870 Self Align Bulkhead Fitting, 1" NPT (Sch. 80), PVC w/ Neoprene Gasket $220 84 LM52-1890 Bulkhead Fitting, 1" NPT x 1" Slip, PVC $40 84 LM52-2400 Reducer Bushing, 3" NPT Thread x 2" NPT Thread (Sch. 40), PVC $28 84 LM52-2410 Reducer Bushing, 3" Slip x 2" NPT Thread (Sch. 40), PVC $12 84 LM52-2800 Reducer Bushing, 3" NPT Thread x 2" NPT Thread (Sch. 80), PVC $55 84 LM52-2810 Reducer Bushing, 3" Slip x 2" NPT Thread (Sch. 80), PVC $90 84 LM52-2850 Flange, 2" NPT Flange - 150# (Sch. 80), PVC $65 84 LM52-2870 Self Align Bulkhead Fitting, 2" NPT (Sch. 80), PVC w/ Neoprene Gasket $330 84 LM52-2890 Bulkhead Fitting, 2" NPT x 2" Slip, PVC $65 84 LM52-3410 Reducer Bushing, 4" Slip x 2" NPT Thread (Sch. 40), PVC $22 84 LM52-3800 Reducer Bushing, 4" NPT Thread x 2" NPT Thread (Sch. 80), PVC $110 84 LM52-3810 Reducer Bushing, 4" Slip x 2" NPT Thread (Sch. 80), PVC $160 84 LM52-3850 Flange, 3" NPT Flange - 150# (Sch. 80), PVC $132 84 LM52-3870 Self Align Bulkhead Fitting, 3" NPT (Sch. 80), PVC w/ Neoprene Gasket $460 84 LM52-3890 Bulkhead Fitting, 3" NPT x 3" Slip , PVC $115 --- LM90-1001 Liquid Tight Fitting $6 84 LM91-1001 NEMA Box, Single Indicator, Non-Windowed, 1/8 DIN, PC $200

92 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Part Number by Page & Price Index Reference

Page P/N Description Note Price

84 LM91-2001 NEMA Box, Two Indicator, Non-Windowed, 1/8 DIN, PC $295 84 LM92-1001 NEMA Box, Single Indicator, Windowed, 1/8 DIN, PC $360 84 LM93-1001 NEMA Box, Two Indicator, Windowed, 1/8 DIN, PC $460 84 LM94-1001 NEMA Box, Single Controller, Windowed, 35mm Rail, PC $385 84 LM95-1001 NEMA Box, Two Controller, Windowed, 35mm Rail, PC $505 66 LO10-1305 Switch-Tek™ Optic Leak Switch, PP, Short, 3/4" NPT (10)(12) $165 66 LO10-1325 Switch-Tek™ Optic Leak Switch, PP, Short, 3/4" G (10)(12) $170 66 LO10-1405 Switch-Tek™ Optic Leak Switch, PP, Long, 3/4" NPT (10)(12) $175 66 LO10-1425 Switch-Tek™ Optic Leak Switch, PP, Long, 3/4" G (10)(12) $180 66 LO10-2305 Switch-Tek™ Optic Leak Switch, PFA, Short, 3/4" NPT (10)(12) $275 66 LO10-2325 Switch-Tek™ Optic Leak Switch, PFA, Short, 3/4" G (10)(12) $280 66 LO10-2405 Switch-Tek™ Optic Leak Switch, PFA, Long, 3/4" NPT (10)(12) $285 66 LO10-2425 Switch-Tek™ Optic Leak Switch, PFA, Long, 3/4" G (10)(12) $290 67 LP15-1405 Switch-Tek™ Guard Capacitance Level Switch- 3/4" NPT (10)(13) $255 67 LP15-1425 Switch-Tek™ Guard Capacitance Level Switch- 3/4" G (10)(13) $260 68 LP50-1005 Switch-Tek™ Non-Intrusive Capacitance Level Switch, PP Bracket (10)(13) $220 68 LP50-5005 Switch-Tek™ Non-Intrusive Capacitance Level Switch, PVDF Bracket (10)(13) $245 68 LP50-6005 Switch-Tek™ Non-Intrusive Capacitance Level Switch, PE Bracket (10)(13) $220 84 LP95-1001 Mounting Bracket, PP $25 84 LP95-5001 Mounting Bracket, PVDF $50 84 LP95-6001 Mounting Bracket, PE $25 63 LU10-1305 Switch-Tek™ Ultrasonic Level Switch, PP, Short, 3/4" NPT (10)(12) $275 63 LU10-1325 Switch-Tek™ Ultrasonic Level Switch, PP, Short, 3/4" G (10)(12) $280 63 LU10-1405 Switch-Tek™ Ultrasonic Level Switch, PP, Long, 3/4" NPT (10)(12) $285 63 LU10-1425 Switch-Tek™ Ultrasonic Level Switch, PP, Long, 3/4" G (10)(12) $290 63 LU10-2305 Switch-Tek™ Ultrasonic Level Switch, PFA, Short, 3/4" NPT (10)(12) $385 63 LU10-2325 Switch-Tek™ Ultrasonic Level Switch, PFA, Short, 3/4" G (10)(12) $390 63 LU10-2405 Switch-Tek™ Ultrasonic Level Switch, PFA, Long, 3/4" NPT (10)(12) $395 63 LU10-2425 Switch-Tek™ Ultrasonic Level Switch, PFA, Long, 3/4" G (10)(12) $400 24 - 25 LU20-5001-IS EchoTouch™ Level Transmitter, 5.4m (18'), 2" NPT $950 24 - 25 LU20-5061-IS EchoTouch™ Level Transmitter, 5.4m (18'), 2" G $955 32 - 33 LU23-00 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" NPT, Type 6P w/o Fob $605 32 - 33 LU23-01 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" NPT, Type 6P w/ Fob (20) $650 32 - 33 LU23-10 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" G, Type 6P w/o Fob $610 32 - 33 LU23-11 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" G, Type 6P w/ Fob (20) $655 34 - 35 LU23-40 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" NPT, NEMA 4X, 1/2" Conduit w/o Fob $655 34 - 35 LU23-41 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" NPT, NEMA 4X, 1/2" Conduit w/ Fob (20) $700 34 - 35 LU23-50 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" G, NEMA 4X, 1/2" Conduit w/o Fob $660 34 - 35 LU23-51 EchoSonic® II Level Transmitter, 5.5m (18.0'), 1" G, NEMA 4X, 1/2" Conduit w/ Fob (20) $705 32 - 33 LU27-00 EchoSonic® II Level Transmitter, 3m (9.8'), 1" NPT, Type 6P w/o Fob $505 32 - 33 LU27-01 EchoSonic® II Level Transmitter, 3m (9.8'), 1" NPT, Type 6P w/ Fob (20) $550 32 - 33 LU27-10 EchoSonic® II Level Transmitter, 3m (9.8'), 1" G, Type 6P w/o Fob $510 32 - 33 LU27-11 EchoSonic® II Level Transmitter, .8'), 1" G, Type 6P w/ Fob (20) $555 34 - 35 LU27-40 EchoSonic® II Level Transmitter, .8'), 1" NPT, NEMA 4X, 1/2" Conduit w/o Fob $555 34 - 35 LU27-41 EchoSonic® II Level Transmitter, .8'), 1" NPT, NEMA 4X, 1/2" Conduit w/ Fob (20) $600 34 - 35 LU27-50 EchoSonic® II Level Transmitter, .8'), 1" G, NEMA 4X, 1/2" Conduit w/o Fob $560

93 www.flowline.com Email UsFax: | [email protected] 93 We Do Your Level Best We Do Your Level Best Reference PartTM Number by Page & Price Index

Page P/N Description Note Price

34 - 35 LU27-51 EchoSonic® II Level Transmitter, .8'), 1" G, NEMA 4X, 1/2" Conduit w/ Fob (20) $605 32 - 33 LU28-00 EchoSonic® II Level Transmitter, 6.2'), 2" NPT, Type 6P w/o Fob $705 32 - 33 LU28-01 EchoSonic® II Level Transmitter, 6,2'), 2" NPT, Type 6P w/ Fob (20) $750 32 - 33 LU28-10 EchoSonic® II Level Transmitter, 6.2'), 2" G, Type 6P w/o Fob $710 32 - 33 LU28-11 EchoSonic® II Level Transmitter, 6.2'), 2" G, Type 6P w/ Fob (20) $755 34 - 35 LU28-40 EchoSonic® II Level Transmitter, 6.2'), 2" NPT, NEMA 4X, 1/2" Conduit w/o Fob $755 34 - 35 LU28-41 EchoSonic® II Level Transmitter, 6.2'), 2" NPT, NEMA 4X, 1/2" Conduit w/ Fob (20) $800 34 - 35 LU28-50 EchoSonic® II Level Transmitter, 6.2'), 2" G, NEMA 4X, 1/2" Conduit w/o Fob $760 34 - 35 LU28-51 EchoSonic® II Level Transmitter, 6.2'), 2" G, NEMA 4X, 1/2" Conduit w/ Fob (20) $805 32 - 33 LU29-00 EchoSonic® II Level Transmitter, 32.8'), 2" NPT, Type 6P w/o Fob $805 32 - 33 LU29-01 EchoSonic® II Level Transmitter, 32.8'), 2" NPT, Type 6P w/ Fob (20) $850 32 - 33 LU29-10 EchoSonic® II Level Transmitter, 32.8'), 2" G, Type 6P w/o Fob $810 32 - 33 LU29-11 EchoSonic® II Level Transmitter, 32.8'), 2" G, Type 6P w/ Fob (20) $855 34 - 35 LU29-40 EchoSonic® II Level Transmitter, 32.8'), 2" NPT, NEMA 4X, 1/2" Conduit w/o Fob $855 34 - 35 LU29-41 EchoSonic® II Level Transmitter, 32.8'), 2" NPT, NEMA 4X, 1/2" Conduit w/ Fob (20) $900 34 - 35 LU29-50 EchoSonic® II Level Transmitter, 32.8'), 2" G, NEMA 4X, 1/2" Conduit w/o Fob $860 34 - 35 LU29-51 EchoSonic® II Level Transmitter, 32.8'), 2" G, NEMA 4X, 1/2" Conduit w/ Fob (20) $905 40 LU30-5003 EchoTouch™ Level Transmitter, (24.5'), 2" NPT, 4-20 mA sourcing $950 40 LU30-5003S EchoTouch™ Level Transmitter, (24.5'), 2" NPT, 4-20 mA sourcing (21) $1,005 40 LU30-5004 EchoTouch™ Level Transmitter, (24.5'), 2" NPT, 4-20 mA sinking $950 40 LU30-5004S EchoTouch™ Level Transmitter, (24.5'), 2" NPT, 4-20 mA sinking (21) $1,005 40 LU30-5063 EchoTouch™ Level Transmitter, (24.5'), 2" G, 4-20 mA sourcing $955 40 LU30-5063S EchoTouch™ Level Transmitter, (24.5'), 2" G, 4-20 mA sourcing (21) $1,010 40 LU30-5064 EchoTouch™ Level Transmitter, (24.5'), 2" G, 4-20 mA sinking $955 40 LU30-5064S EchoTouch™ Level Transmitter, (24.5'), 2" G, 4-20 mA sinking (21) $1,060 48 - 49 LU77-5005 EchoSwitch® II Level Switch & Controller, 3m (9.8'), 95-250 VAC, 1" NPT $750 48 - 49 LU77-5065 EchoSwitch® II Level Switch & Controller, 3m (9.8'), 95-250 VAC, 1" G $755 48 - 49 LU78-5005 EchoSwitch® II Level Switch & Controller, 8m (26.2'), 95-250 VAC, 1" NPT $850 48 - 49 LU78-5065 EchoSwitch® II Level Switch & Controller, 8m (26.2'), 95-250 VAC, 1" G $855 36 - 37 LU80-5101 EchoSpan® Level Transmitter, 3m (9.8'), 1" NPT $650 36 - 37 LU80-5161 EchoSpan® Level Transmitter, 3m (9.8'), 1" G $655 36 - 37 LU81-5101 EchoSpan® Level Transmitter, 5.5m (18.0'), 2" NPT $750 36 - 37 LU81-5161 EchoSpan® Level Transmitter, 5.5m (18.0'), 2" G $755 36 - 37 LU83-5101 EchoSpan® Level Transmitter, 8m (26.2'), 2" NPT $850 36 - 37 LU83-5161 EchoSpan® Level Transmitter, 8m (26.2'), 2" G $855 36 - 37 LU84-5101 EchoSpan® Level Transmitter, 10m (32.8'), 2" NPT $950 36 - 37 LU84-5161 EchoSpan® Level Transmitter, 10m (32.8'), 2" G $955 65 LV10-1301 Switch-Tek™ Vertical Buoyancy Level Switch, PP, 3/4" NPT (10)(11) $110 65 LV10-1351 Switch-Tek™ Vertical Buoyancy Level Switch, PP, 3/4" Rp (10)(11) $115 65 LV10-5301 Switch-Tek™ Vertical Buoyancy Level Switch, PVDF, 3/4" NPT (10)(11) $220 69 LV20-1201 Switch-Tek™ Mini-Vertical Float Level Switch, PP, 1/8" NPT $24 69 LV20-1251 Switch-Tek™ Mini-Vertical Float Level Switch, PP, 1/8" Rp $24 --- LV20-2101 Switch-Tek™ Mini-Vertical Float Level Switch, Teflon, 1/8" NPT (NC) $315 --- LV20-2201 Switch-Tek™ Mini-Vertical Float Level Switch, Teflon, 1/8" NPT (NO) $315 69 LV20-5201 Switch-Tek™ Mini-Vertical Float Level Switch, PVDF, 1/8" NPT $48 69 LV20-5251 Switch-Tek™ Mini-Vertical Float Level Switch, PVDF, 1/8" Rp $48

94 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best Part Number by Page & Price Index Reference

Page P/N Description Note Price

70 LV35-S201 Switch-Tek™ Vert High Temp-Float Level Switch, 300 psi (20.7 bar) $85 70 LV35-S401 Switch-Tek™ Vert High Temp-Float Level Switch, 300 psi (20.7 bar) w/ Slosh Shield $150 70 LV36-S201 Switch-Tek™ Vert High-Temp Float Level Switch, 500 psi (34.5 bar) $185 70 LV36-S401 Switch-Tek™ Vert High-Temp Float Level Switch, 500 psi (34.5 bar) w/ Slosh Shield $225 41 LV55-S001 FloaTek™ Level Transmitter, Custom (22) $470 41 LV55-S001-16 FloaTek™ Level Transmitter, 16" (41cm) $646 41 LV55-S001-24 FloaTek™ Level Transmitter, 24" (61cm) $734 41 LV55-S001-32 FloaTek™ Level Transmitter, 32" (81cm) $822 41 LV55-S001-36 FloaTek™ Level Transmitter, 36" (91cm) $866 41 LV55-S001-42 FloaTek™ Level Transmitter, 42" (107cm) $932 41 LV55-S001-48 FloaTek™ Level Transmitter, 48" (122cm) $998 64 LZ12-1405 Switch-Tek™ Vibration Level Switch, 3/4" NPT (10)(13) $295 64 LZ12-1425 Switch-Tek™ Vibration Level Switch, 3/4" G (10)(13) $300 26 - 27 XP88-0 EchoSafe® XP Level Transmitter, 7.5m (24.6') $1,295 26 - 27 XP89-0 EchoSafe® XP Level Transmitter, 10m (32.8') $1,495

Notes

(1) To factory configure for 240 VAC, place an E at the end of the part number (i.e.: XXYY-ZZZZ-E). (2) To order the CE configuration, place CE at the end of the part number (i.e.: XXYY-ZZZZ-CE) and add $50. (3) To calculate the track adder, round up A-Dim to next ft. (30 cm) and multiply by $10 for PP or $40 for PVDF. Dims may be spec'd in 1/2" (1.3 cm) increments. (4) To factory configure for 240 VAC, place an E at the end of the part number (i.e.: XXYY-ZZZZ-AA"-E). (5) To order the CE configuration, place CE at the end of the part number (i.e.: XXYY-ZZZZ-AA"-CE) and add $50. (6) To calculate the track adder, round up A-Dim to the next foot (30 cm) and multiply it times $20. Dimensions may be specified in 1/2" (1.3 cm) increments. (7) To factory configure for 240 VAC, place an E at the end of the part number (i.e.: XXYY-ZZZZ-AA"-BB"-CC"-E). (8) To order the CE configuration, place CE at the end of the part number (i.e.: XXYY-ZZZZ-AA"-BB"-CC"-CE) and add $50. (9) To calculate the guide adder, round up the A-Dim to the next inch (2.5 cm) and multiply it times $10. Dimensions may be specified in 1/2" (1.3 cm) increments (10) To special order 25' or 50' of cable, place the cable length at the end of the part number (i.e.: XXYY-ZZZZ-25). (11) For PP, add $20 for 25' and add $40 for 50' of cable. For PVDF, add $75 for 25' and add $150 for 50' of cable. (12) For PP, add $20 for 25' and add $40 for 50' of cable.For PFA, add $75 for 25' and add $150 for 50' of cable. (13) For PP, add $20 for 25' and add $40 for 50' of cable. (14) To factory configure for 240 VAC, place an E at the end of the part number (i.e.: XXYY-ZZZZ-E). (15) To order the CE configuration, place CE at the end of the part number (i.e.: XXYY-ZZZZ-CE) and add $50. (16) To determine the shipping box size, add 8" to the length. (17) The weight of these products depends on each separate component. (18) To calculate the length adder, round up the A-Dimension to the next foot (30 cm) and multiply it times $5 fo PVC, $10 for PP or $40 for PVDF. (19) Dimensions may be specified in 1/2" (1.3 cm) increments. (20) Configuration includes Fob (LI99-1001). (21) To special order cable, place the cable length (feet/m) at the end of the part number (i.e.: LU30-5003S-10'). Add $16 per foot of cable. (22) Specify the A, B and C (optional) Dim's at the end of the p/n. To calculate the guide adder, round up A-Dim to next inch (2.5 cm) and multiply it times $11. (23) To calculate the extension adder, round up A-Dim to the next foot (30 cm) and multiply it times $40. Dim. may be specified in 1/2" (1.3 cm) increments. (24) To calculate the stem adder, round up A-Dim to next ft. (30 cm) and multiply by $40 for PVDF. There is no charge for the first foot.

Prices and speciﬁcations are subject to change without notice.

95 www.flowline.com Email UsFax: | [email protected] 95 We Do Your Level Best We Do Your Level Best Reference TM Notes

96 www.flowline.com Call Us | 562.598.3015 We Do Your Level Best