s e h c t u l c

g n i n e v e

s t a e l p

y t t e r p 2 l e v e l reorder: apparel #5 l l i k ® s more projects, tips & techniques at Joann.com free SUPPLIES & TOOLS: • : Simplicity ® 4117 • Fabric* 1 1 • 2 ⁄2 yds 1 ⁄2" black knife- trim • 7 JHB ® gold & gemstone ® • Fabri-Tac adhesive Simplicity Pattern #4117 • machine, basic sewing supplies • Hook-&-loop fastener dot or large snap • Iron, pressing surface • Pre-made handle or chain

DIRECTIONS: RS = Right side(s). WS = Wrong side(s). * Follow pattern for fabric choice & yardage for & .

1. Follow pattern instructions. out lining, interfacing ZEBRA PURSE: Refer to photo. Substitute 7 & purse fabric. Don’t cut out handle or tab. a 1 ⁄8" half-ball covered button blank for gold buttons. 2. Cut 12" of trim for tab. Fold in half, WS together; DIRECTIONS: Glue. Allow to dry. 1. Follow pattern instructions. Cut out lining, interfacing 3. Assemble purse. Fuse trim tab; insert raw edge into & purse fabric. Fold bottom of pattern pieces under allowance. Turn purse RS out; press. 1 1 ⁄4" before cutting to reshape purse. 4. Glue trim around inside edge of purse, beginning at 2. Weave trim in & out on face of purse. Adhere with back, so top-pleated edge is visible above top edge. Fabri-Tac ® or sew in place. 5. Cut trim with 1/2" allowance. Fold under raw edge; 3. Assemble purse; follow pattern instructions.. glue. Glue end over raw edge. Allow to dry. 4. Sew snap or fastener dot inside purse to close. 6. Repeat with trim on outside of purse; start in back so pleated edge barely covers top of purse. Finish end as 5. Cover button with lining or zebra fabric; follow in previous step. package instructions. 7. Make a spiral with remaining trim; . Sew spiral 6. Cut off 1 side of on remaining trim. on end of trim tab. Sew button to center. 7. 6" of trim into circle with running . Keep Sew decorative buttons onto middle spiral trim. winding trim to desired fullness while sewing or gluing. 8. Sew snap or fastener dot under tab closure. Tuck under raw end. Add handle or chain if desired. 8. Sew on the snap or fastener dot.

Created by Wrights ® Skill Level 2: Some experience necessary Approximate Crafting Time: 2 hrs

Please read and follow all manufacturers’ instructions for all tools and materials used. Provide adult supervision if children participate in this project. ©2011 Jo-Ann Stores, Inc.

Up 6/26/11 P290-399 • 202-514