Standards published

New International Standards published between 01 June and 30 June 2016

* Available in English only

** French version of standard previously published in English only

Price group

TC 2 Fa steners ISO 4759-3:2016 Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F B

TC 6 Paper, board and pulps ISO 8254-2:2016 Paper and board — Measurement of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method B

ISO 16260:2016 * Paper and board — Determination of internal bond strength C

TC 8 Ships and marine technology

ISO 13073-3:2016 * Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 3: Human health risk assessment method of biocidally active substances F used in anti-fouling paints on ships during the application and removal processes TC 17 Steel

ISO 4942:2016 * Steels and irons — Determination of vanadium content — N-BPHA spectrophoto- metric method B

ISO 683-1:2016 * Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering· F

ISO 683-2:2016 * Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering F

TC 21 Equipment for fire protection and fire fighting

ISO 7076-3:2016 * Fire protection — Foam fire extinguishing systems — Part 3: Medium expansion foam equipment B

TC 22 Road vehicles

ISO 3536:2016 * Road vehicles — Safety glazing materials — Vocabulary A

ISO 2575:2010/Amd 5:2016 * Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 5 XZ

TC 24 Particle characterization including sieving

ISO 9044:2016 * Industrial woven wire cloth — Technical requirements and tests C

TC 27 Solid mineral fuels

ISO 13909-1:2016 * Hard coal and coke — Mechanical sampling — Part 1: General introduction B

ISO 13909-2:2016 * Hard coal and coke — Mechanical sampling — Part 2: Coal — Sampling from mov- ing streams E

ISO 13909-3:2016 * Hard coal and coke — Mechanical sampling — Part 3: Coal — Sampling from sta- tionary lots C

ISO 13909-4:2016 * Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples E

ISO 13909-5:2016 * Hard coal and coke — Mechanical sampling — Part 5: Coke — Sampling from moving streams D

ISO 13909-6:2016 * Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples D

ISO 13909-7:2016 * Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing F

ISO 13909-8:2016 * Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias E

TC 28 Petroleum products and related products of synthetic or biological origin

ISO 2719:2016 * Determination of flash point — Pensky-Martens closed cup method D

TC 34 Food products ISO 16140-1:2016 Microbiology of the food chain — Method validation — Part 1: Vocabulary A

ISO 16140-2:2016 Microbiology of the food chain — Method validation — Part 2: Protocol for the vali- dation of alternative (proprietary) methods against a reference method G

ISO 17468:2016 Microbiology of the food chain — Technical requirements and guidance on estab- lishment or revision of a standardized reference method A

ISO 22004:2014 * Food safety management systems — Guidance on the application of ISO 22000 E

TC 35 Paints and varnishes ISO 4629-1:2016 Binders for paints and varnishes — Determination of hydroxyl value — Part 1: Ti- trimetric method without using a catalyst B

ISO 4629-2:2016 Binders for paints and varnishes — Determination of hydroxyl value — Part 2: Ti- trimetric method using a catalyst A

TC 36 Ci nematography

ISO 7739:2016 * Cinematography — Two-track photographic analogue sound records on 16 mm motion-picture prints — Positions and width dimensions A

TC 37 Terminology and other language and content resources ISO 24611:2012 Language resource management — Morpho-syntactic annotation framework (MAF) G

TC 38 Textiles

ISO 105-D02:2016 * Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Or- ganic solvents A

TC 42 Photography

ISO 12234-3:2016 * Electronic still picture imaging — Removable memory — Part 3: XMP for digital photography E

ISO/TS 17321-4:2016 * Graphic technology and photography — Colour characterization of digital still cam- eras (DSCs) — Part 4: Programmable light emission system E

ISO/TR 19247:2016 * Photography — Guidelines for reliable testing of digital still cameras B

TC 43 Acoustics ISO 362-3:2016 Measurement of noise emitted by accelerating road vehicles — Engineering meth- od — Part 3: Indoor testing M and N categories G

TC 44 Welding and allied processes ISO 3581:2016 Welding consumables — Covered electrodes for manual metal arc welding of stain- less and heat-resisting steels — Classification D

ISO 14171:2016 Welding consumables — Solid wire electrodes, tubular cored electrodes and elec- trode/flux combinations for submerged arc welding of non alloy and fine grain steels D — Classification

ISO 9692-3:2016 Welding and allied processes — Types of joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys B

ISO 15012-4:2016 Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: General requirements B

TC 45 Rubber and rubber products ISO 18752:2014 Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification C

ISO 249:2016 Rubber, raw natural — Determination of dirt content B

ISO 1420:2016 * Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water A

TC 67 Materials, equipment and offshore structures for petroleum, petr o- chemical and natural gas industries

ISO 17348:2016 Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment C

ISO 17349:2016 Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures F

ISO 19905-1:2016 Petroleum and natural gas industries — Site-specific assessment of mobile off- shore units — Part 1: Jack-ups H

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO 4802-1:2016 * Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification C

ISO 4802-2:2016 * Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification C

ISO 11418-7:2016 * Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms A

TC 92 Fire safety ISO 12863:2010/Amd 1:2016 Standard test method for assessing the ignition propensity of cigarettes — Amend- ment 1 XZ

TC 94 Personal safety -- Protectiv e clothing and equipment

ISO 16900-5:2016 * Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and veri- E fication tools

ISO/TS 16975-1:2016 * Respiratory protective devices — Selection, use and maintenance — Part 1: Estab- lishing and implementing a respiratory protective device programme G

TC 96 Cranes ISO 4301-1:2016 Cranes — Classification — Part 1: General C

ISO 20332:2016 Cranes — Proof of competence of steel structures H

TC 102 Iron ore and direct reduced iron

ISO 16878:2016 * Iron ores — Determination of metallic iron content — Iron(III) chloride titrimetric method B

TC 104 Freight containers ISO 1496-1:2013/Amd Series 1 freight containers — Specification and testing — Part 1: General cargo 1:2016 containers for general purposes — Amendment 1 XZ

TC 106 Dentistry ISO 10139-2:2016 Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use B

ISO 18556:2016 Dentistry — Intraoral spatulas A

ISO/TR 18130:2016 Dentistry — Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants B

TC 122 Packaging

ISO/TS 18614:2016 * Packaging — Label material — Required information for ordering and specifying self-adhesive labels F

ISO/TS 19709-3:2016 * Transport packaging — Small load container systems — Part 3: Bond Stackable System (BSS) C

TC 131 Fluid power systems ISO/TS 13725:2016 Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cyl- inder D

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO 16486-4:2016 * Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves C

TC 142 Cleaning equipment for air and other gases ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities F

TC 146 Air quality

ISO 17179:2016 * Stationary source emissions — Determination of the mass concentration of ammo- nia in flue gas — Performance characteristics of automated measuring systems F

TC 147 Water quality ISO 7027-1:2016 Water quality — Determination of turbidity — Part 1: Quantitative methods B

ISO/TS 17951-1:2016 * Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off- B line distillation

ISO/TS 17951-2:2016 * Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA) with automated in-line distillation C

ISO 18635:2016 Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter — Method using gas E chromatography-mass spectrometry (GC-MS) and electron capture negative ioniza- tion (ECNI) ISO/TS 18220:2016 * Water quality — Larval development test with the harpacticoid copepod Nitocra spinipes D

ISO 5667-4:2016 * Water quality — Sampling — Part 4: Guidance on sampling from lakes, natural and man-made E

TC 149 Cycles ISO 11243:2016 Cycles — Luggage carriers for bicycles — Requirements and test methods D

TC 150 Implants for surgery

ISO 7206-13:2016 * Implants for surgery — Partial and total hip joint prostheses — Part 13: Determina- tion of resistance to torque of head fixation of stemmed femoral components A

TC 155 Nic kel and nickel alloys ISO 8049:2016 Ferronickel shot — Sampling for analysis E

TC 163 Thermal performance and energy use in the built environment

ISO 16957:2016 * Measurement of apparent thermal conductivity of wet porous building materials by a periodic method D

TC 164 Mechanical testing of metals ISO 6892-1:2016 Metallic materials — Tensile testing — Part 1: Method of test at room temperature G

TC 165 Timber structures

ISO 12122-3:2016 * Timber structures — Determination of characteristic values — Part 3: Glued lami- nated timber B

TC 168 Prosthetics and orthotics

ISO/TS 16955:2016 * Prosthetics — Quantification of physical parameters of ankle foot devices and foot units C

ISO 29783-3:2016 Prosthetics and orthotics — Vocabulary — Part 3: Pathological gait (excluding pros- thetic gait) A

TC 172 Optics and photonics

ISO 18221:2016 * Microscopes — Microscopes with digital imaging displays — Information provided to the user regarding imaging performance C

TC 174 Jewellery ISO 9202:2014 Jewellery — Fineness of precious metal alloys A

ISO 11490:2015 Jewellery — Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime A

TC 181 Safety of toys ISO/TR 8124-8:2016 * Safety of toys — Part 8: Age determination guidelines E

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 13543:2016 * Copper, lead, zinc and nickel sulfide concentrates — Determination of mass of contained metal in a lot B

TC 185 Safety devices for protection against excessive pressure ISO 4126-1:2013/Amd Safety devices for protection against excessive pressure — Part 1: Safety valves — 1:2016 Amendment 1 XZ

ISO 4126-5:2013/Amd Safety devices for protection against excessive pressure — Part 5: Controlled safe- 1:2016 ty pressure relief systems (CSPRS) — Amendment 1 XZ

ISO 4126-7:2013/Amd Safety devices for protection against excessive pressure — Part 7: Common data 1:2016 — Amendment 1 XZ

TC 190 Soil quality

ISO 18763:2016 * Soil quality — Determination of the toxic effects of pollutants on germination and early growth of higher plants D

TC 192 Gas turbines

ISO 19859:2016 * Gas turbine applications — Requirements for power generation H

TC 197 Hydrogen technologies

ISO/TS 19880-1:2016 * Gaseous hydrogen — Fuelling stations — Part 1: General requirements H

TC 198 Sterilization of health care products ISO 15883-7:2016 Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors em- ploying chemical disinfection for non-invasive, non-critical thermolabile medical E devices and healthcare equipment TC 204 Intelligent transpo rt systems

ISO/TS 21219-19:2016 * Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 19: Weather information G (TPEG2-WEA) TC 206 Fine ceramics

ISO 17561:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance B

ISO 17562:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for linear thermal expansion of monolithic ceramics by push-rod technique C

TC 215 Health informatics

ISO/IEEE 11073-10419:2016 * Health informatics — Personal health device communication — Part 10419: Device specialization — Insulin pump H

ISO/IEEE 11073-10424:2016 Health informatics — Personal health device communication — Part 10424: Device specialization — Sleep apnoea breathing therapy equipment (SABTE) H

ISO/IEEE 11073-10425:2016 Health informatics — Personal health device communication — Part 10425: Device specialization — Continuous glucose monitor (CGM) G

ISO/TS 17251:2016 * Health informatics — Business requirements for a syntax to exchange structured dose information for medicinal products B

ISO 17523:2016 Health informatics — Requirements for electronic prescriptions C

ISO/TS 20440:2016 * Health informatics — Identification of medicinal products — Implementation guide for ISO 11239 data elements and structures for the unique identification and ex- F change of regulated information on pharmaceutical dose forms, units of presenta- tion, routes of administration and packaging TC 238 Solid biofuels ISO 16993:2016 Solid biofuels — Conversion of analytical results from one basis to another B

ISO 16994:2016 Solid biofuels — Determination of total content of sulfur and chlorine B

TMBG Technical Management Board - groups

IWA 18:2016 * Framework for integrated community-based life-long health and care services in aged societies E

ISO Guide 82:2014 * Guidelines for addressing sustainability in standards D

CASCO Committee on conformity assessment

ISO/IEC TS 17021-5:2014 * Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 5: Competence requirements for auditing and B certification of asset management systems JTC 1 Information technology

ISO/IEC 20922:2016 * Information technology — Message Queuing Telemetry Transport (MQTT) v3.1.1 G

ISO/IEC 13157-4:2016 * Information technology — Telecommunications and information exchange between systems — NFC Security — Part 4: NFC-SEC entity authentication and key agree- D ment using asymmetric cryptography

ISO/IEC 13157-5:2016 * Information technology — Telecommunications and information exchange between systems — NFC Security — Part 5: NFC-SEC entity authentication and key agree- B ment using symmetric cryptography

ISO/IEC 25022:2016 * Systems and software engineering — Systems and software quality requirements and evaluation (SQuaRE) — Measurement of quality in use F

ISO/IEC 25023:2016 * Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of system and software product quality F

ISO/IEC 25066:2016 * Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for Usability — Evalu- F ation Report ISO/IEC TR 29110-1:2016 * Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview D

ISO/IEC TR 29110-5-2- * Systems and software engineering — Lifecycle profiles for Very Small Entities 1:2016 (VSEs) — Part 5-2-1: Organizational management guidelines G

ISO/IEC TS 33052:2016 * Information technology — Process reference model (PRM) for information security management G

ISO/IEC 7816-6:2016 * Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange E

ISO/IEC 30190:2016 * Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 H Gbytes per disk) BD Recordable disk

ISO/IEC 30192:2016 * Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 H Gbytes per disk) BD Rewritable disk

ISO/IEC 30193:2016 * Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk H

ISO/IEC 27000:2016 Information technology — Security techniques — Information security management systems — Overview and vocabulary E

ISO/IEC 27009:2016 * Information technology — Security techniques — Sector-specific application of ISO/IEC 27001 — Requirements B

ISO/IEC 29146:2016 * Information technology — Security techniques — A framework for access man- agement E

ISO/IEC 18384-2:2016 * Information technology — Reference Architecture for Service Oriented Architecture (SOA RA) — Part 2: Reference Architecture for SOA Solutions H

ISO/IEC 18384-3:2016 * Information technology — Reference Architecture for Service Oriented Architecture (SOA RA) — Part 3: Service Oriented Architecture ontology G

Standards confirmed

The following International Standards are confimred for a five year period:

TC 1 Screw threads

ISO 1502:1996 (reconfirmed)

TC 2 Fasteners ISO 14588:2000 (reconfirmed)

ISO 15973:2000 (reconfirmed)

ISO 15974:2000 (reconfirmed)

ISO 1479:2011 ISO 1481:2011 ISO 1482:2011 ISO 1483:2011 ISO 7053:2011 ISO 10510:2011

TC 4 Rolling bearings

ISO 582:1995 (reconfirmed)

TC 6 Paper, board and pulps

ISO 216:2007 (reconfirmed)

ISO 5264-2:2011

TC 8 Ships and marine technology

ISO 21072-2:2009

TC 17 Steel

ISO 14250:2000 (reconfirmed)

TC 18 Zinc and zinc alloys

ISO 301:2006 ISO 752:2004 ISO 15201:2006

TC 20 Aircraft and space vehicles

ISO 2277:1973 (reconfirmed)

ISO 14622:2000 (reconfirmed)

ISO 14953:2000 (reconfirmed)

ISO 21349:2007 (reconfirmed)

ISO 21350:2007 (reconfirmed)

ISO 22538-5:2010 ISO 23460:2011 ISO 27875:2010

TC 22 Roa d vehicles

ISO/TS 11155-1:2001

TC 23 Tractors and machinery for agriculture and forestry

ISO 6489-3:2004 (reconfirmed)

ISO 14223-2:2010 TC 24 Particle characterization including sieving

ISO 20998-1:2006 (reconfirmed)

TC 33 Refractories

ISO 1893:2007 (reconfirmed)

ISO 5022:1979 (reconfirmed)

ISO 8894-2:2007 (reconfirmed)

ISO 10080:1990 (reconfirmed)

ISO 16282:2007 (reconfirmed)

TC 34 Food products

ISO 1443:1973 (reconfirmed)

ISO 2917:1999 (reconfirmed)

ISO 3496:1994 (reconfirmed)

ISO 7516:1984 (reconfirmed)

ISO 9768:1994 (reconfirmed)

ISO 9884-1:1994 (reconfirmed)

ISO 9884-2:1999 (reconfirmed)

ISO 15598:1999 (reconfirmed)

TC 35 Paints and varnishes

ISO 14680-1:2000 (reconfirmed)

ISO 14680-2:2000 (reconfirmed)

ISO 14680-3:2000 (reconfirmed)

ISO 17132:2007 (reconfirmed)

ISO 21227-3:2007 (reconfirmed)

TC 37 Terminology and other language and content resources

ISO 12199:2000 (reconfirmed)

TC 38 Textiles

ISO 3998:1977 (reconfirmed)

ISO 4915:1991 (reconfirmed)

ISO 9073-2:1995 (reconfirmed)

ISO 9073-6:2000 (reconfirmed)

ISO 9073-7:1995 (reconfirmed)

ISO 9073-8:1995 (reconfirmed)

ISO 9073-15:2007 (reconfirmed)

ISO 3572:1976 (reconfirmed)

ISO 4921:2000 (reconfirmed)

ISO 8498:1990 (reconfirmed)

TC 39 Machine tools

ISO 3371:1975 (reconfirmed) ISO 8526-1:1990 (reconfirmed)

ISO 8526-2:1990 (reconfirmed)

ISO 29262:2011

TC 42 Photography

ISO 418:2001 (reconfirmed)

ISO 420:1994 (reconfirmed)

ISO 422:1994 (reconfirmed)

ISO 423:1994 (reconfirmed)

ISO 424:1994 (reconfirmed)

ISO 897:2000 (reconfirmed)

ISO 1009:2000 (reconfirmed)

ISO 2720:1974 (reconfirmed)

ISO 3298:1994 (reconfirmed)

ISO 3299:1994 (reconfirmed)

ISO 3617:1994 (reconfirmed)

ISO 3618:1994 (reconfirmed)

ISO 3619:1994 (reconfirmed)

ISO 3620:1994 (reconfirmed)

ISO 3621:1994 (reconfirmed)

ISO 3622:1996 (reconfirmed)

ISO 3623:1994 (reconfirmed)

ISO 3624:1994 (reconfirmed)

ISO 3625:1994 (reconfirmed)

ISO 3626:1996 (reconfirmed)

ISO 3627:2001 (reconfirmed)

ISO 3628:1994 (reconfirmed)

ISO 3629:2000 (reconfirmed)

ISO 3665:2011

ISO 3772:2000 (reconfirmed)

ISO 4090:2001 (reconfirmed)

ISO 5655:2000 (reconfirmed)

ISO 5763:1989 (reconfirmed)

ISO 5799:1991 (reconfirmed)

ISO 5800:1987 (reconfirmed)

ISO 5990:2000 (reconfirmed)

ISO 6053:1979 (reconfirmed)

ISO 6328:2000 (reconfirmed)

ISO 6516:1980 (reconfirmed) ISO 6849:1996 (reconfirmed)

ISO 6851:2001 (reconfirmed)

ISO 6853:2001 (reconfirmed)

ISO 7004:2002 (reconfirmed)

ISO 7187:1995 (reconfirmed)

ISO 7589:2002 (reconfirmed)

ISO 7760:2001 (reconfirmed)

ISO 7829:1986 (reconfirmed)

ISO 8374:2001 (reconfirmed)

ISO 8581:1994 (reconfirmed)

ISO 9236-1:2004 (reconfirmed)

ISO 9236-3:1999 (reconfirmed)

ISO 10157:1991 (reconfirmed)

ISO 10330:2002 (reconfirmed)

ISO 10349-1:2002 (reconfirmed)

ISO 10349-8:2002 (reconfirmed)

ISO 10349-13:2002 (reconfirmed)

ISO 10636:1994 (reconfirmed)

ISO 11312:2000 (reconfirmed)

ISO 12234-2:2001 (reconfirmed)

ISO 13450:1996 (reconfirmed)

ISO 14535:2001 (reconfirmed)

ISO 14546:2000 (reconfirmed)

ISO 14807:2001 (reconfirmed)

ISO 17531:2002 (reconfirmed)

ISO 18055-1:2004 (reconfirmed)

ISO 18917:1999 (reconfirmed)

ISO 18918:2000 (reconfirmed)

ISO 18919:1999 (reconfirmed)

ISO 18920:2011

ISO 18923:2000 (reconfirmed)

ISO 18930:2011 ISO 18934:2011 ISO 18941:2011 ISO 18946:2011

TC 44 Welding and allied processes

ISO 9606-3:1999 (reconfirmed)

ISO 9606-4:1999 (reconfirmed) ISO 9606-5:2000 (reconfirmed)

TC 45 Rubber and rubber products

ISO 28702:2008 (reconfirmed)

ISO 1407:2011

ISO 3417:2008 (reconfirmed)

ISO 7267-2:2008 (reconfirmed)

ISO 27727:2008 (reconfirmed)

ISO 123:2001 (reconfirmed)

ISO 125:2011 ISO 248-1:2011 ISO 1652:2011

ISO 1657:1986 (reconfirmed)

ISO 1802:1992 (reconfirmed)

ISO 2027:1990 (reconfirmed)

ISO 2303:2011

ISO 2453:1991 (reconfirmed)

ISO 2475:2011

ISO 3858:2008 (reconfirmed)

ISO 4660:2011

ISO 5435:2008 (reconfirmed)

ISO 5794-3:2011 ISO 8332:2011 ISO 8511:2011 ISO/TS 16097:2013

ISO 17564:2008 (reconfirmed)

ISO 20299-3:2008 (reconfirmed)

ISO 24698-1:2008 (reconfirmed)

ISO 24698-2:2008 (reconfirmed)

ISO 1798:2008 (reconfirmed)

ISO 24999:2008 (reconfirmed)

TC 46 Information and documentation

ISO 11940-2:2007 (reconfirmed)

TC 48 Laboratory equipment

ISO 4799:1978 (reconfirmed)

TC 54 Essential oils

ISO 8432:1987 (reconfirmed)

ISO 17382:2007 (reconfirmed) TC 58 Gas cylinders

ISO 11625:2007 (reconfirmed)

TC 60 Gears

ISO 14635-2:2004

TC 61 Plastics

ISO 1133-1:2011 ISO 1133-2:2011

ISO 2556:1974 (reconfirmed)

ISO 6401:2008 (reconfirmed)

ISO 22007-3:2008 (reconfirmed)

ISO 24538:2008 (reconfirmed)

ISO 2535:2001 (reconfirmed)

ISO 3673-1:1996 (reconfirmed)

ISO 4615:1979 (reconfirmed)

ISO 4901:2011

ISO 9702:1996 (reconfirmed)

ISO 14899:2001 (reconfirmed)

ISO 14900:2001 (reconfirmed)

ISO 15063:2011

ISO 26603:2008 (reconfirmed)

TC 72 Textile machinery and accessories

ISO 9904:2000 (reconfirmed)

TC 87 Cork

ISO 2066:2004 (reconfirmed)

ISO 2219:2010

ISO 2509:1989 (reconfirmed)

ISO 3810:1987 (reconfirmed)

ISO 3813:2004 (reconfirmed)

ISO 3850:2004 (reconfirmed)

ISO 4714:2000 (reconfirmed)

ISO 9149:2010

ISO 9727-1:2007 (reconfirmed)

ISO 9727-2:2007 (reconfirmed)

ISO 9727-3:2007 (reconfirmed)

ISO 9727-4:2007 (reconfirmed)

ISO 9727-5:2007 (reconfirmed)

ISO 9727-6:2007 (reconfirmed) ISO 9727-7:2007 (reconfirmed)

TC 94 Personal safety -- Protective clothing and equipment

ISO 16900-2:2009 ISO/TS 16974:2011 ISO/TS 16976-3:2011 ISO/TS 16976-4:2012

TC 106 Dentistry

ISO 3107:2011

TC 108 Mechanical vibration, shock and conditi on monitoring

ISO 2631-4:2001 (reconfirmed)

TC 110 Industrial trucks

ISO 15870:2000 (reconfirmed)

TC 112 Vacuum technology

ISO 9803-1:2007 (reconfirmed)

ISO 9803-2:2007 (reconfirmed)

ISO 21358:2007 (reconfirmed)

TC 114 Horology

ISO 22810:2010

TC 118 Compressors and pneumatic tools, machines and equipment

ISO 15744:2002 (reconfirmed)

ISO 17066:2007 (reconfirmed)

ISO 28927-11:2011

ISO 3857-2:1977 (reconfirmed)

TC 119 Powder metallurgy

ISO 3953:2011

ISO 3954:2007 (reconfirmed)

TC 131 Fluid power systems

ISO 7789:2007 (reconfirmed)

TC 135 Non -destructive testing

ISO 3452-4:1998 (reconfirmed)

ISO 12706:2009 ISO 16371-1:2011 ISO 16526-1:2011 ISO 16526-2:2011 ISO 16526-3:2011

ISO 3530:1979 (reconfirmed) ISO 12714:1999

TC 138 Pl astics pipes, fittings and valves for the transport of fluids

ISO 21751:2011

TC 145 Graphical symbols

ISO 80416-4:2005 (reconfirmed)

TC 146 Air quality

ISO 16702:2007 (reconfirmed)

ISO 28439:2011

TC 150 Implants for surgery

ISO 7197:2006 (reconfirmed)

ISO 7206-2:2011

ISO 7207-1:2007 (reconfirmed)

ISO 14879-1:2000 (reconfirmed)

ISO 17853:2011

ISO 21534:2007 (reconfirmed)

ISO 21536:2007 (reconfirmed)

ISO 18192-1:2011

TC 155 Nickel and nickel alloys

ISO 8050:1988

TC 156 Corrosion of met als and alloys

ISO 7539-8:2000 (reconfirmed)

TC 159 Ergonomics

ISO 11228-2:2007 (reconfirmed)

ISO 11228-3:2007 (reconfirmed)

TC 163 Thermal performance and energy use in the built environment

ISO 12623:2011 ISO 12624:2011 ISO 12628:2011 ISO 12629:2011

ISO 15927-6:2007 (reconfirmed)

TC 164 Mechanical testing of metals

ISO 7500-2:2006 (reconfirmed)

TC 170 Surgical instruments

ISO 13402:1995 (reconfirmed)

TC 172 Optics and photonics

ISO 9039:2008 (reconfirmed) ISO 8576:1996 (reconfirmed)

ISO 8429:1986 (reconfirmed)

ISO 10943:2011

TC 173 Assistive products for persons with disability

ISO 23600:2007 (reconfirmed)

TC 184 Automation systems and integration

ISO 10303-52:2011

TC 188 Small craft

ISO 6185-1:2001 (reconfirmed)

ISO 6185-2:2001 (reconfirmed)

ISO 8665:2006 (reconfirmed)

ISO 13342:1995 (reconfirmed)

ISO 13591:1997 (reconfirmed)

ISO 13592:1998 (reconfirmed)

ISO 15584:2001 (reconfirmed)

TC 195 Building construction machinery and equipment

ISO 16039:2004 (reconfirmed)

TC 199 Safety of machinery

ISO 29042-8:2011 ISO 29042-9:2011

TC 201 Surface chemical analysis

ISO 12406:2010

TC 204 Intelligent transport systems

ISO/TS 15638-19:2013 ISO/TS 17444-1:2012 ISO/TS 17444-2:2013 ISO/TS 25110:2013

TC 211 Geographic information/Geomatics

ISO 19134:2007 (reconfirmed)

ISO 19137:2007 (reconfirmed)

ISO/TS 19139-2:2012 ISO/TS 19150-1:2012 ISO/TS 19158:2012

TMBG Technical Management Board - groups

ISO/IEC Guide 2:2004 ISO/IEC Guide 75:2006 ISO/IEC Guide 77-1:2008 ISO/IEC Guide 77-2:2008 ISO/IEC Guide 77-3:2008

JTC 1 Information technology

ISO/IEC 7816-1:2011 ISO/IEC 10373-8:2011 ISO/IEC 24727-5:2011

Standards withdrawn

Period from 01 June to 30 June 2016

TC 23 Tractors and machinery for agriculture and forestry

ISO 11448:1997 (replaced by )

TC 34 Food products

ISO 16140:2003 (replaced by ISO 16140-1:2016, ISO 16140-2:2016)

ISO 16140:2003/Amd 1:2011 (replaced by ISO 16140-1:2016, ISO 16140-2:2016)

TC 35 Paints and varnishes

ISO 4629:1996 (replaced by ISO 4629-1:2016)

TC 39 Machine tools

ISO 7007:1983 (replaced by )

ISO 7008:1983 (replaced by )

ISO 7009:1983 (replaced by )

ISO 9375:1989 (replaced by )

ISO 9414:1989 (replaced by )

ISO 9415:1989 (replaced by )

ISO 9451:1989 (replaced by )

ISO 9452:1989 (replaced by )

ISO 9535:1989 (replaced by )

ISO 9536:1989 (replaced by )

ISO 9537:1989 (replaced by )

ISO 9558:1989 (replaced by ) ISO 9566:1989 (replaced by )

ISO 9567:1989 (replaced by )

ISO 9615:1989 (replaced by )

ISO 9616:1989 (replaced by )

ISO 9617:1989 (replaced by )

TC 45 Rubber and rubber products

ISO 6528-3:1988 (replaced by )

TC 102 Iron ore and direct reduced iron

ISO/TS 16878:2010 (replaced by ISO 16878:2016)

TC 130 Graphic technology

ISO 2846-3:2002 (replaced by )

ISO 2846-5:2005 (replaced by )

TC 155 Nickel and nickel alloys

ISO 6207:1992 (replaced by )

ISO 6208:1992 (replaced by )

ISO 9722:1992 (replaced by )

ISO 9723:1992 (replaced by )

ISO 9724:1992 (replaced by )

ISO 12169:1996 (replaced by )

JTC 1 Information technology

ISO/IEC TR 9126-2:2003 (replaced by ISO/IEC 25023:2016)

ISO/IEC TR 9126-3:2003 (replaced by ISO/IEC 25023:2016)

ISO/IEC TR 9126-4:2004 (replaced by ISO/IEC 25022:2016)