EQUIPMENT & SUPPLY CO., INC. MASONRY CATALOG VOLUME 6 • ISSUE 4

HAND TOOLS, POWER SAWS, MORTAR MIXERS, SCAFFOLDING, REINFORCEMENT, CHEMICALS, & MUCH MORE

Serving the Construction Industry since 1968 • farrellequipment.com MASONRY PRODUCTS

DECORATIVE CAST CONCRETE STONE

Casa di Sassi is a lightweight concrete facade designed for cosmetic use on interior and exterior walls. The product is intended for non-structural use, and because of its light weight, it requires no additional footings. Veneer or manufactured stone can be applied to almost any load-bearing wall, wood frame, steel, or masonry.

Ledgestone Ledgestone Ledgestone Ledgestone Ledgestone Ledgestone Bella Carbon Gola Matera Monte Murano

Blends Blends Blends Blends Blends Bella Bianco Bolzano Cremona Trento

Old World Old World Old World Old World Old World Bella Dorato Euro Grigio Tuscan

Country Rubble Country Rubble EZ Ledge EZ Ledge EZ Ledge Matera Murano Bergamo Cremona Matera

ACCESSORIES:

Flat Wall Cap Chiseled Cap Natural Cap Keystone Trim Stone

Kwik Stack Kwik Stack Carbone Matera

Hearthstone Hearthstone Hearthstone Light Block Double Single Hose Bib Header Trim Watertable Cream Grey Sage Receptacle Receptacle

2 Concentrated Mortar Color

A Series H Series X Series

10A 10H 10X

20A 20H 20X

22A 22H 22X

25A 25H 25X

30A 30H 30X

32A 32H 32X

33A MASONRY33H PRODUCTS 33X Concentrated Mortar Color 35A 35H 35X

37A 37H 37X A Series MORTAR COLOR H Series X Series 40A 40H X SERIES: 40X

10A 41A 10H 41H 10X 41X Mortar Color 20A 44A SGS20H Mortar Colors are provided in unique44H pre- 20X 44X weighed and measured amounts to assure the 22A 45A most22H accurate color consistency available.45H 22X 45X

25A 50A 25H 50H 25X 50X Since mortar makes up over 20% of the surface 30A 70A area30H of brick structures, make the most70H of it 30X 70X with the most trusted name in mortar coloring– 32A 80A 32H 80H 32X 80X Solomon Colors.

33A 85A 33H 85H 33X 85X Solomon Colors Mortar Colors have set the standard for decades as 35A 94A 35H 94H 35X 94X the most consistent and most frequently specified mortar colors. Our

37A consistent coloring97A and depth37H of color choices enhance the beauty97H 37X 97X and value of brick, stone, and colored concrete block. Since the mortar 40A joint makes up about 20%40H of a brick structure’s surface area, coloring 40X the mortar enhances the building’s appearance. You can choose from 41A 41H 41X Due to shade variations associated with printing limitations, we 60 standard A, H, and X series colors or use our Color Laboratory to suggest that you review samples for actual color. 44A custom-match colors to 44Hperfectly fit your design 44X

45A 45H 45X

50A 50H 50X

70A PCL SAND 70H 70X UNDERGROUND PCL Sand Mortar

80A 80HA dry preblended mortar mix containing Portland 80X MORTAR cement, hydrated lime, and dried masonry sand formulated for superior bond, water retention, 85A 85H 85X and board life. Available in Types M, S, and

94A 94HN, meets ASTM C 270 and ASTM C 1714 94X Underground Utility Mortar requirements. Available in standard or custom A dry preblended mortar mix 97A colors and custom mix designs97H for specific applications or properties. 97X containing Portland cement and hydrated lime, masonry cement, Standard is designed to be compatible with the characteristics of the or mortar cement and dried masonry sand formulated for superior specified masonry unit, is acceptable for all types of masonry construction bond and outstanding freeze-thaw resistance in all underground with submittals available upon request, and may be used above or below pre-cast concrete structure applications. Meets ASTM C 270 and grade when manufactured to appropriate specification. ASTM C 1714 requirements.

SPX101013 80 lb Bag PCL Sand Mortar Type S SPX106516 80 lb Bag Underground Utility Mortar SPX101212 80 lb Bag PCL Sand Mortar Type N

SILICA SAND PORTLAND SPX200170 CEMENT 50 lb Bag 40/30 Silica Sand Multi Use. Produced from high purity Type 1 Portland Cement quartz sands. Used for a wide variety General purpose cement. For use when of industrial and contractor mixed there are no extenuating conditions. applications which need a reliable contribution or require chemically inert SPX0854 94 lb Bag Portland Cement Type 1 structural filler.

SET ACCELERATOR SET RETARDER

98454 Non-Chloride Mortar Set Accelerator Mortar Set Retarder A dry, white, powdered set accelerator packaged A white powdered set retarder packaged for use for use in pre-packaged mortar or concrete. in pre-packaged mortar or concrete. It slows It speeds up set times while increasing early down set times without affecting compressive compressive strength. Mortar set accelerator strength. It is ready for easy dosing; no premixing contains calcium but no chlorides. 5.6 oz per bag is required. 5.6 oz per bag. or 5 lb water soluble bags.

3 MASONRY PRODUCTS

MASONRY REINFORCEMENT SYSTEM Ladder Type Wire System (Series 200)

Ladder Type Wire System Ladder 2 Wire Ladder design is a prefabricated reinforcement for embedment in the horizontal (Series 200) mortar joints of masonry. It is manufactured in 10' 8" lengths from wire conforming to ASTM A 82 / A82M for cold drawn steel wire. It consists of two or more parallel and deformed longitudinal wires welded to a perpendicular cross wire spaced 16" O.C. Out-to-out spacing is approximately two inches less than the nominal thickness of the wall.

Ladder design spaced 16" O.C. positions cross rods on web of block to allow core clearance. This simplifies rebar installation; centering utilizes strength of grout. Allows Ladder 3 Wire unrestricted flow of grout or loose fill insulation into CMU cells. Minimizes resetting of (Series 200) joint reinforcement around rebar. Improves resistance to shrinkage cracking. Provides stronger bond with cross rods in web of block. Less time devoted to rebar installation and grout pouring. Meets ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcing).

Finishes Mill Galvanized Ladder 4 Wire Hot Dip Galvanized (Series 200) Stainless Steel

Dimensions / Gauges: Wire Gauges Side Rods Cross Rods Standard 9 Gauge (.148 in) 9 Gauge Heavy Duty 3/16" (.187 in) 9 Gauge Extra Heavy Duty 3/16" (.187 in) 3/16"

MASONRY REINFORCEMENT SYSTEM Truss Type Wire System (Series 300)

Truss Type Wire System Truss 2 Wire Truss design is a prefabricated reinforcement for embedment in the horizontal mortar (Series 300) joints for masonry. Manufactured in 10 ft lengths from wire conforming to ASTM A82 / A82M for cold drawn steel wire. It consists of two or more parallel and deformed longitudinal wires welded to a continuous diagonal cross wire at 16" O.C. Out-to-out spacing is approximately two inches less than the nominal thickness of the wall.

We recommend utilizing the extra strength of truss when installing reinforcement in single wythe walls, where the application of grout and rebar is at a minimum. Truss 3 Wire Corners and tees are available for any joint reinforcement product that we (Series 300) manufacture. 30" lengths are standard. Any size and finish can be made to order for cavity and composite walls. Specify inside or outside corners for cavity or composite walls.

Finishes Mill Galvanized Hot Dip Galvanized Truss 4 Wire Stainless Steel (Series 300) Dimensions / Gauges: Wire Gauges Side Rods Cross Rods Standard 9 Gauge (.148 in) 9 Gauge Heavy Duty 3/16" (.187 in) 9 Gauge Extra Heavy Duty 3/16" (.187 in) 3/16"

4 MASONRY PRODUCTS

ADJUSTABLE MASONRY Level Hook & Level Hook & REINFORCEMENT SYSTEMS Eye (Series 800) Eye (Series 900)

Ladder Type with Ties - Level Hook & Eye (Series 800) Ladder Level design is manufactured with double eyes butt welded 16" O.C. to the longitudinal wires ensuring that the height of the reinforcing will not exceed half the dimension of the joint (3/8" joint = 3/16" max reinforcement) as required by TMS 402 Code. Level Eye Ladder & Level Adjustable Tad design provide optimum CMU core clearance.

Truss Type with Ties - Level Hook & Eye (Series 900) Truss Level design is manufactured with double eyes butt welded • Level Eyes make it easier to maintain 3/8″ mortar joint. 16" O.C. to the longitudinal wires ensuring that the height of the • Allows use of 3/16″ side rods. reinforcing will not exceed half the dimension of the joint (3/8" joint = • Eliminates weld points that are too thick. 3/16" max reinforcement) as required by TMS 402 Code. Compatible • Meets ASCE/ACI 530 building code requirements for masonry with WireBond Clip system for use in seismic zones. structures and ASTM A 951.

CHANNEL CHANNEL SLOTS ANCHOR 1301 1402 Channel Anchor with Bend 1302 12 gauge or 16 gauge x 1 1/4" wide x various lengths. Hot dip galvanized or stainless steel. Anchors masonry to steel columns, concrete, or existing walls. 1301

WALL TIES 1302 Tapcon 2000 Corrugated Wall Tie Screw 16 gauge or 22 gauge x 7" wide x 7" long. 1301 Continuous Channel Slot Finishes: mill galvanized, hot dipped Designed to anchor masonry to structural steel galvanized, and stainless steel. columns or beams. Dimensions: 12 gauge x 1 3/4" wide. Standard lengths: 10' 6". Finishes: plain, mill galvanized, hot dip GWT-7 16 Gauge 7" x 7" galvanized, and stainless steel. Accepts various slot anchors. GWT-7 22 Gauge 7" x 7" 1302 Channel Slot Designed to anchor masonry to structural steel columns or beams. Dimensions: 12 gauge x 1 3/4" wide. Standard length: 8". Finishes: plain, mill galvanized, hot dip WELD-ON TIES 1010 galvanized, and stainless steel. Accepts various slot anchors.

Type I 1000 Type I 1000 WELD-ON TIES

1010 Type II 1003 Type II 1003 Type II 1000 Type I & 1003 Type II Anchors 1001 Individual or continuous ties weld-on to steel column or screw on to steel. Type I available in 1/4" wire in 5" or 9" length. Type II available in 12 gauge (plate) in 128" length. Finishes: mill galvanized, 1001 Type II Anchors hot dip galvanized, and stainless steel. Individual ties weld-on to steel column or screw on to steel. Type II available in 1/4" wire in 5" or 9" length. 1010 Fire-Proofing Anchors Finishes: mill galvanized, hot dip galvanized, and stainless steel. Permits spray-on of fire-proofing foam. Available in 1/4" diameter. Finishes: mill galvanized and hot dip galvanized. Offset varies Note: In accordance with TMS 402/ACI530 Code requirements, WIRE- depending on thickness of fire-proofing. BOND does not recommend Type II anchors for steel stud backup.

5 MASONRY PRODUCTS

WALL TIES & ANCHORS 1900 & 1901 Mesh Wall Tie For bonding intersecting masonry walls • Finishes: Hot Dip Galvanized, Stainless Steel • Available in 16 and 19 Gauge • Lengths: 8" or 12" in Length or Custom at 100' - 0" Roll Standard • Widths: 3", 4", 6". 8", 10", or Custom

2200 Dovetail Corrugated Tie For anchoring masonry to concrete • Finishes: Mill Galvanized, Hot Dip Galvanized, Stainless Steel • Available in 12 and 16 Gauge • Lengths: 3-1/2", 5-1/2", 7-1/2", or Custom Sizes Available • Widths: 1"

2102 Dovetail Triangular Tie For anchoring masonry to concrete • Finishes: Mill Galvanized, Hot Dip Galvanized, Stainless Steel • Available in 12 gauge x 7/8" with 5/16" hole • Diameter: 3/16" or 1/4" • Sizes: 3" x 3", 4" x 4", 5" x 5", 6" x 6", 7" x 7", 7" x 9", or Custom Sizes Available

3000Z Rigid Steel Tie For anchoring load-bearing walls at intersections • Finishes: Hot Dip Galvanized, Stainless Steel • Width: 1-1/2" Standard • Thickness: 1/4" • Length: 24" Standard or Custom Sizes Available

2501 Veneer Anchor For anchoring masonry to concrete or steel stud • Finishes: Hot Dip Galvanized, Stainless Steel • Available in 12, 14, and 16 Gauge • Standard Dimensions: 1-1/4" wide, 1-1/2" bend, 5/16" hole standard • Standards Lengths: 3-1/2", 4-1/2", 5-1/2", or Custom Sizes Available

2102-O Dovetail Offset Triangle For anchoring masonry to concrete or steel stud • Finishes: Hot Dip Galvanized, Stainless Steel • Dovetail Clip: 12 gauge x 7/8" with 5/16" hole • Triangle Diameter: 3/16" or 1/4" • Triangle Sizes: 3" x 3", 4" x 4", 5" x 5", 6" x 6", 7" x 7", 7" x 9", or Custom Sizes

1100 Triangular Tie For tying brick veneer to metal stud and masonry to steel columns • Finishes: Hot Dip Galvanized, Stainless Steel • Triangle Diameter: 3/16" or 1/4" • Triangle Sizes: 3" x 3", 4" x 4", 5" x 5", 6" x 6", 7" x 7", 7" x 9", or Custom Sizes

6 MASONRY PRODUCTS

DT SEISMIC TIES & ANCHORS TIE ASSEMBLIES 711 & 721 DT 711 & DT721 Anchoring Systems 2421 Seismic Veneer Anchor Plate Designed for concrete backup walls and spray insulation 2421 & Designed to anchor masonry to a structure applications, can accommodate up to 4" insulation, 12 2422 accommodating rigid insulation up to 3" thick. 12 or 14 or 14 gauge. gauge. DT 721 Seismic Anchoring System RJ 711 2422 Seismic Veneer Anchor Pintle Designed for concrete backup walls and spray insulation Designed to anchor masonry to a structure accommo- applications, can accomodate up to 4" insulation. 2442 dating rigid insulation, with provision for holding joint Plate: 14 or 12 gauge. 2422 Seismic Pintle: 2" x 3-1/4", reinforcement in the veneer. 3-1/2", 4-1/2", or 5-1/2". 4-1/4", 5-1/4" or custom widths, 11 or 12 gauge. Bend has a maximum adjustment of 2". 11 or 12 gauge. RJ 711 Adjustable Veneer Anchor 2401 adjustable veneer anchor with 2402 3/16" dia. HCL 711 2522 pintle. Hot dip galvanized or stainless steel. 2522 Seismic Veneer Anchor HCL 711 Anchoring System Seismic lug forms a channel in brick veneer for 2411 plate and 2402 pintle anchoring system installs continuous 9 gauge or 3/16" wire. Width: 1 1/4". Length: quickly on exterior walls with brick veneer while providing 3-1/2", 4-1/2", or 5-1/2". 12, 14 or 16 gauge. positive contact with metal stud.

SCREW-ON VENEER CONTROL ANCHORS JOINTS 1004X Type III X Anchor Installs quickly and easily 2901 Rubber Control Joint on exterior walls with brick For masonry walls at control joint. veneer. Provides positive Type III X Rubber control joints allow for expansion and contraction of contact with metal studs and masonry walls while reducing the possibility of air and water transfers compression loads penetration. Width: 2-5/8". Length: 4-0". Other sizes available. to the steel stud backup. Used in conjunction with the 1100 series triangle. Width: 1-1/4". 3300 Length: 6" long with over Expansion 3300 Joint 3" of vertical adjustability. 12 or Expansion Joint with 14 gauge. Adhesive

1004 Type III Veneer Anchor Type III For anchoring brick veneer to metal stud. Used in conjunction with the 1100 series triangular ties. Width: 3300 Expansion Joint 1-1/4". Length: 6" long with over 3" of A closed cell neoprene sponge that can be placed horizontally vertical adjustability. 12 or 14 Gauge. beneath relieving angle, or in the vertical expansion joint to act as a control joint. Material: Closed cell neoprene conforming to ASTM D 1056, RE41. 410 Self-Drilling Self-Tapping Screws 410 Stainless Steel -.00015" min electro zinc plated Type Dimensions Compression Adhesive Packaging sharp non-walking point for fast penetration into high tensile steel. Standard size #10-16 x 1-1/2" Hex Vertical 3/8" x 3" x 50' Up to 50% Non-Adhesive 500 lf / box Washer head. Polymer coated. Horizontal 3/8" x 3" x 50' Up to 50% Non-Adhesive 500 lf / box

REBAR POSITIONERS GROUT SCREEN 3403

3404 3600 Grout Stop Designed to prevent grout from falling 3403 & 3404 Rebar Positioners through block core while maintaining a Position rebar in center of block. Corelock is installed 1-1/4" deep positive bond in mortar joint. Constructed into the CMU instead of on top of the block. Diagonal positioning of strong, non-corrosive 1/4" square polypropylene monofilament in the core ensures that rebar is always centered automatically screening. Provides improved bonding of masonry anchor in hollow and prevents any movement. One piece design with no welds. 9 block construction. Widths: 2, 4, 6, 8, and 10 inches. Length: 100 lf gauge or 3/16" diameter. per roll.

7 MASONRY PRODUCTS

MORTAR NET™ Mortar Net™ SELF-FURRED METAL USA, LTD LATH DRAINAGE SYSTEM Mortar Net™ is the patented dovetail shaped material placed in the cavity STX0-002 Self-Furred Mesh Lath of brick masonry walls. Mortar Net is placed 3.4 lb per sq yard. 27" x 96" Sheet. vertically on top of the flashing inside the STX0-003 Self-Furred Mesh Lath wall cavity where it catches and permanently suspends mortar droppings above the level 2.5 lb per sq yard. 27" x 97" Sheet. of the weep holes and flashing. Its patented dovetail shape prevents mortar droppings from forming a continuous dam. Its shape, combined with a 90 percent open weave construction, allows water and air to rapidly and easily move through the Mortar Net material to the weeps.

Mortar Net Weep Vents are placed between units in the weep course of a brick or block wall to keep weep holes open, preventing blockage by insects or RAINSCREEN debris. Available in six colors to match mortar: white, brown, tan, red, gray, almond (please specify). 4' X 65' Driwall Rainscreen Drainage mat for exterior wall systems. The Product # Thickness Height Length Pkg Qty entangled net product eliminates incidental moisture problems in most exterior veneer MN10-04 0.4" 10" 60" 250 lin ft applications, including stucco, manufactured MN10-1 1.0" 10" 60" 100 lin ft stone, and plank siding. MN10-2 2.0" 10" 60" 100 lin ft Also Available: Weep Vents 2.25" x 3.5" x 0.5" (specify color) KEE-DWR020-1 Roll 4' X 65' Driwall Rainscreen 020-1 (Mad.) Mortar Net BlockFlash™ is a complete, embeddable flashing solution for managing moisture in exterior single wythe CMU walls. It uses flashing pans to collect moisture in the wall and channel it to the exterior through integrated weep spouts. Available CAVCLEAR® in 6", 8", 10", or 12". DRAINAGE SYSTEM HBBF08 8" HBBF12 12"

CavClear® Air Space Maintenance & Drainage System CavClear® Masonry Mat creates a completely clear cavity wall. No WALL BRACING mortar bridging, no ventilation SYSTEM problems, no drainage concerns.

Hog Leg® Wall Bracing System Designed by the requests of mason 8" x 96" Sheets contractors that needed a safer way to brace masonry walls. The 3/4" for air spaces 1" -1-1/8" ® 1" for air spaces 1-1/4" -1-3/8" Hog Leg is a safe, fully tested, and more efficient way to brace 1-1/4" for air spaces ≥1"-1/2" masonry walls for today's masons. Reduces the time it takes to 16" x 96" Sheets brace masonry walls by 50%. 3/4" for air spaces 1" -1-1/8" 1" for air spaces 1-1/4" -1-3/8" 1-1/4" for air spaces ≥1"-1/2" EZHL400 Hog Leg Engineered Bracing System EZHL14 Hog Leg 14' Extension Kit

WALL BRACING SYSTEM Footlock™ Bracing System You can specify blueprint placement. No tools required. Requires no additional footing support. Install or remove in a minute with one person. Great savings of valuable time, lumber, and space. Improves safety at the work site.

FT-1000 Foot Lock Brace FT-2000 Foot Lock Hook

by DIRECT STEEL

8 MASONRY PRODUCTS

BUCK BRACES COTTON ROPE

Buck-Ups® The Sinclair all-metal adjustable door buck brace eliminates most of the labor and all of the material waste in setting metal door bucks and window sash. • Saves Time - Instantly clamps in place without tools • Saves Labor - Unskilled labor does fast, perfect job • Saves Space - Leaves clear work area for masons & other work • No Waste - Buck-ups go from job to job without waste • Accurate - Holds bucks plumb without wobble or warp No. 480 Buck-Up (for ceiling heights up to 15')

Wicks moisture from the cavity to the exterior in brick and mortar Universal joints allow fastening from any angle. construction. Ceiling bracket is secured be externally threaded stud with standard 1/4"-20 nut. JC1000 3/8" - 10 lb Coil

WEEP HOLES & VENTS 3600 3600 Series - Round Weep Holes 3600I Round plastic weep hole manufactured from medium density polyethylene. Dimensions: 3/8" O.D. x 1-1/4" I.D. x 4". Available in stainless steel filter and wick, copper filter, stainless steel filter, wick, brass filter and wick, and copper filter and wick.

3603 - Clear Rectangular Weep Vents Clear rectangular weep vent manufactured from clear butyrate. Dimensions: 3/8" O.D. x 1-1/2" x 3-1/2". Available in stainless steel filter and wick, 3603B 3603 stainless steel filter, and wick.

3602 Louvered Weep Hole Louvered Weep Hole allows moisture to leave the wall and not re-enter. Rectangular protective strips prevent mortar droppings from clogging opening. Fits varying joint widths from 5/16" to 3/4". Manufactured from flexible PVC. 3602

Sizes: 2-1/4", 2-7/8, and 3 1/2" high.

3601 Cell Vent Cell Vent (ultra violet resistant polypropylene co-polymer) consists of many small, adjacent passageways bonded together in one unit. Its cellular composition provides easy drainage for moisture along the full height of the head joint.

Standard Size: 3/8"W x 2 1/2"D x 3 3/8"L 3601 Jumbo Size: 3/8"W x 3 1/2"D x 3 3/8"L Available Colors: Clear, White, Tan, Cocoa, Gray, Brown, Black

9 MASONRY PRODUCTS

FLASHING 4120 Aquaflash Aqua Flash 500 flashing is a composite sheet type waterproofing membrane consisting of 8 mils of high density cross laminated polyethylene bonded to 32 mils of rubberized asphalt for a total thickness of 40 mils. Features: Composite flashing. Excellent puncture resistance. Self-healing since the adhesive system will elongate and recover if somewhat damaged. Needs no reglet when adhering membrane to vertical substrate. Applications: Thru-wall flashing, Concealed flashing, Foundation sill flashing, Base flashing, Spandrel flashing, Head and sill flashing, Parapet flashing.

4192 EPDM Thru-Wall Flashing EPDM thru-wall flashing membrane is a flexible EPDM rubber membrane that forms a moisture retarder in cavity wall construction by redirecting water to a building exterior.

Features: Exhibits excellent uniaxial and multiaxial tensile and hydrostatic features, enabling it to withstand typical stresses caused by point loading conditions in a masonry application while maintaining membrane integrity. Outstanding expansion and contraction characteristics. Highly resistant to masonry chemicals. Flexible to -50° F. Easy to install/full line of installation accessories. Strong resistance to UV and ozone. Puncture and tear resistant. Remains flexible even after aging.

Custom Flashing Available in type 304 stainless steel. Durable, not prone to tears or punctures. Very long life. Hemmed drip edges deflect downward migrating water away from the building. Hemmed drip edges form safe, clean, aesthetically attractive lines. Separate hemmed drip edge piece can supplement the performance of membrane and laminated copper flashing.

4200 Termination Bar Used at top of flashing to mechanically secure it to backup. Available in stainless steel or aluminum.

COPPER FLASHING FLASHING TAPE 4130 Copper Aqua Flash A composite flexible flashing composed of a layer of polyester film bonded to a solid sheet of soft tempered copper bonded to 32 mils of a highly adhesive SBS modified bitumen (rubberized asphalt) with a 8067 All Weather removable silicone coated liner. Flashing Tape A self-adhered, waterproof flashing membrane designed for Sizes Widths: 12", 16", 18", 24", and sealing around openings and penetrations in exterior walls. This 36". Standard length is 50 linear feet. product has a unique acrylic pressure sensitive adhesive that Material: 3 oz copper sheet laminated with film on one side and aggressively sticks and stays stuck both at lower and higher bonded to 32 mils of rubberized asphalt for a total mil thickness application temperatures than traditional flashing tapes. It even respectively of 60 mils and 70 mils. adheres to damp surfaces. The proprietary backing seals around hand driven nails and staples to prevent moisture intrusion. This Uses: Can be applied as part of a system which uses both Aqua backing is also tough, resists punctures and tears, yet it is thin to Flash primer and mastic. It may be applied to masonry, concrete, fit conveniently into corners and under siding. Available in 4", 6", steel, wood, and gypsum. & 9" widths.

10 MASONRY PRODUCTS

AIR-SHIELD PVC FLASHING FLASHING WASCO SEAL® A polyvinyl chloride carefully calendered SEALTIGHT® Air-Shield to assure full weight and uniform An airtight waterproofing thickness. Sheet weight and thickness vaporproofing membrane that is inhibits puncture during installation normally 40 mils thick, 67' long, and available in or from building movement. Will not deform when stretched at room various widths. Fabricated from specially modified temperature, tear, or rip, will show no asphalt and cross-laminated polyethylene. cracking or flaking when bent through Type Thickness Avg. Weight Provides complete “above-grade“ flashing and 180° over a 1/32" mandrel and bent at the 10 .010 1.1 oz/SF water, air, and vapor barrier on concrete, masonry, same point over the same size mandrel 20 .020 2.2 oz/SF gypsum board, and wood walls. in the opposite direction through 360°. Is 30 .030 3.3 oz/SF stabilized to resist exposure without physical 60 .056 6.2 oz/SF deterioration when tested in accordance with MD4512 12" x 75' roll MD4520 20" x 75' roll ASTM standards D-822 for a period of not MD4516 16" x 75' roll MD4524 24" x 75' roll less than 400 hours. RECOMMENDED FOR CONCEALED APPLICATIONS ONLY. MD4518 18" x 75' roll Sizes: Type 20, rolls 144' long, 48" and 72" wide. Types 20 and 30, rolls 100' long, 48" and 72" wide. Type 60, rolls 50' long, 48" wide. Can be cut into many widths.

AIR BARRIER WATERPROOFING TK-2102 Rubberized MEMBRANES Air Barrier Provides a barrier against air leakage and vapor MEL-ROL® Self-Adhering diffusion and a water-resistive barrier in above- grade wall assemblies. Sprayed onto masonry, Waterproofing System poured, precast walls, or dens-glass with a A flexible, versatile, dependable, cost-effective, “peel and stick“ self-adhering air barrier and flashing membrane protective, roll-type waterproofing membrane. Ideal for waterproof- around windows and doors and over control joint ing foundations, vertical wall, and below-grade floors in residential and pipe and conduit extrusions through the wall. and commercial construction.

TK210255 55 Gal Drum Air Barrier MD4000 60' long by 38.5" wide roll

AIR BARRIER WATERPROOFING TK-2103 PRIMER Airmax Wb Rubberized MEL-ROL® Self-Adhering Waterproofing Air Barrier System Water based above grade rubberized air Apply MEL-PRIME Solvent-Base VOC barrier. A high performance rubberized Primer to concrete to simultaneously polymer formulation. Intended use is for prepare and dust proof new and old, commercial cavity walls to prevent air vertical and horizontal surfaces in and water movement, saving energy and one easy, economical operation. Use MEL-PRIME S/B VOC on all preventing damage caused by moisture concrete surfaces to receive applications of MEL-GARD®, MEL- condensation such as structural damage, ROL®, MEL-DEK™ and/or AIR-SHIELD™ Waterproofing Membranes mold, and mildew. from W. R. MEADOWS.

TK210355 55 Gal Drum Air Barrier MD4101 1 Gal Mel-Prime Solvent MD4100 5 Gal Pail Mel-Prime Solvent

SILOXANE SEALER SOLVENT CLEANER

TK-290 A solvent based, low viscosity oligomeric TK-00 A solvent for cleaning sprayers that organosiloxane, one component, deep penetrating, were used for spraying solvent based sealing invisible, non-darkening water repellent for compound and tools. Also used for removing concrete and masonry. Approved for bridge decks. solvent based curing and sealing compounds.

TK290-1201 1 Gal Container TK290DOT05 5 Gal Container TK0001 1 Gal Container TK290DOT55 55 Gal Container TK0005 5 Gal Container

11 MASONRY PRODUCTS

POINTING MASTIC MANUFACTURED STONE CLEANER Sealtight® Pointing Mastic Sure Klean® Manufactured Stone Cleaner A pre-mixed, cold-applied polymeric single component Removes common construction and atmospheric compound. Designed for use with vapor and staining from manufactured stone and other waterproofing membrane and detail strip products architectural concrete surfaces. General-purpose, non- to seal all membrane terminations. Offers excellent etching acidic cleaner. Removes mortar smears, rust, cohesive and adhesive qualities to structural concrete, mud, atmospheric dirt, and other stains without altering masonry, or wood. the surface texture.

MD4200 29 oz Cartridges PS10050-01 1 Gal Jug Manufactured Stone Cleaner

MASONRY CLEANER CITRUS CLEANER Sure Klean® Vana Trol® Citri-Clean For safely cleaning brick and stone surfaces subject to Environmentally safe, nontoxic. Dilute with water or vanadium, manganese, and other metallic stains. Breaks use in concentrated form. Removes oil, grease, rubber up excess mortar and job dirt for easy rinsing away with marks, other contaminants, cures, and sealers. fresh water. For use with colored mortars.

PSVAN1 1 Gal Container UNX60001 1 Gal Jug Citri-Clean Degreaser PSVAN5 5 Gal Container UNX60005 5 Gal Pail Citri-Clean Degreaser PSVAN55 55 Gal Container Also available in 55 Gal Containers

CONCRETE CLEANER MASTIC REMOVER Sure Klean® Heavy Duty Cleaner For ridding textured concrete of excess mortar, concrete Blue Bear BEAN-e-doo Mastic Remover splashes, heavy efflorescence, embedded stains, rust, and Ideal for use in occupied areas like post more. Improves color depth and uniformity of standard and offices, schools, hospitals, and other public colored concrete. areas where safety is important. Removes newer mastics, layered adhesives, and even PS10090-01 1 Gal Container glues 50+ years old. PS10090-05 5 Gal Container FRA-500MR 1 Gal Jug FRA-500MR-5 5 Gal Pail

LIME SOLVENT Sure Klean® 101 Lime Solvent For dark-colored brick and tile surfaces not subject to metallic oxidation. Removes excess mortar and job dirt from COATINGS REMOVER new masonry. Safer and more effective than muriatic acid on Blue Bear Soy-Gel Coatings Remover colored mortar and dark-colored brick and tile. Removes multiple layers of topical sealers, acrylics, enamels, urethanes, latex, some epoxies, PS1011 1 Gal Container other single-component coatings, and lead based PS1015 5 Gal Container paint. Made with soybeans. Safe, low-odor, non- PS10155 55 Gal Container caustic, green coating remover. No methylene chloride.

FRA-600GL 1 Gal Jug DETERGENT FRA-600GL-5 5 Gal Pail Sure Klean® 600 Detergent Cleaner for new masonry. Quickly dissolves mortar smears and construction dirt, leaving bricks clean and color- uniform. Safer and more effective than muriatic acid for MURIATIC ACID new masonry. No streaking, burning, or etching. A heavy-duty concrete muriatic acid. Uses: etching, PS6001 1 Gal Container cleaning brick, concrete, and swimming pools. PS6005 5 Gal Container PS60055 55 Gal Container DO3000 1 Gal Container

12 MASONRY PRODUCTS

DEGREASER TOOL PROTECTANT Blue Bear Emerge Cleaner/Degreaser Cleans oil, grease, dirt, and grime off asphalt, concrete, metal, GatorSkin® Tool and painted walls. Protectant & Lubricant FRA-700DG 1 Gal Jug Excellent for power screeds and trowels. Spray on surfaces to protect against spatter. Reduces concrete sticking for easy clean up. Lubricates moving parts on many tools.

EXTERIOR SURFACE CLEANER FALGF10900 32 oz Spray Bottle Gator Skin Blue Bear EBC Exterior Surface Cleaner FALGF10905 1 Gallon Bottle Gator Skin Removes efflorescence, cement films, and mortar residues.

FRA-720ES 1 Gal Jug BULLSEYE SUPER QUICK CONCRETE ADHESIVE REMOVER Blue Bear Ickee Stickee Unstuck Adhesive Super Quick Concrete Shield Removes glue and building material sticker residue quickly. (Non-Stick Coating) A heavy duty release agent designed to help FRA-740AD 1 Gal Jug protect and keep trucks and equipment clean.

Super Quick Concrete Dissolver 100% Biodegradable. Dissolves concrete in 15 minutes. Liquid compound formulated to CORROSION PROTECTION dissolve built-up cement on tools and equipment. Fluid Film Provides corrosion control, BUL1000 5 Gal Pail Super Quick Concrete Dissolver penetration, metal wetting, and BUL2000 5 Gal Pail Super Quick Concrete Shield (Non-Stick Coating) water displacement. Heavily corroded and/or frozen parts can be salvaged.

FLU00107 2.25 oz Spray Can CLEANER DEGREASER FLU00207 11.75 oz Spray Can FLU12207 1 Gal Can SP757 Citrus Cleaner Degreaser FLU12208 5 Gallon Pail A heavy duty, multi-purpose cleaner and graffiti remover. Removes grimy dirt, grease, and oil on walls, vinyl, formica, fiberglass, wood, ceramic tile, and many plastics. Biodegradable. 20 oz can (16 oz net wt.) CONCRETE BUILDUP & SPLATTER REMOVER DISPOSABLE GLOVES Blast-Off Extremely effective at dissolving concrete buildup Powder Free Nitrile Gloves and splatter without damaging or corroding Breakthrough 5.5 pH Technology. Made to match exposed steel, chrome, aluminum or electrical healthy skin’s natural 5.5 pH levels to ensure the components. Produces a thick, rich foam that MOST comfortable fit yet. 100 pc box. clings to vertical and overhead surfaces. GDNPF105L Nitrile Gloves - Large NOXBO10L Nox-Crete 2.64 Gal Box GDNPF105X Nitrile Gloves - X-Large

BLAST-OFF SPRAYER Sign Up for Farrell Emails NOXBOPF Sprayer For Increased Effectiveness use this Be the first to know Foaming Tip when our products go sprayer equipped With The Blast-Off on sale! Foaming Tip. To subscribe, visit: NOXBOPF Blast Off Sprayer NOX8007 BlastOff Foaming Tip bit.ly/farrelleq

13 MASONRY PRODUCTS

RUBBER EXTRUDED POLYSTYRENE GLOVES FOAM BOARDS CertiFoam® 25 SE and SL VP7000 Rigid extruded polystyrene foam boards suitable for most common VP63B Sol-Vex Gloves Unsupported, premium quality, residential, commercial, and roofing Black Rubber Gloves nitrile. 11 mil, 13” embossed insulation applications. The closed- Unlined natural rubber. Heavy duty. 40 mil straight cuff glove. thick. 18" long. Rolled cuff. cell structure and extruded skins provide superior moisture resistance, TigerGrip Nitrite Gloves high compressive strength, and Textured surface for grip. 7 mil thick. Powder and latex-free. Hi-vis orange. excellent long term thermal performance. Both meet or exceed ASTM C578-95 Type IV. TIG8844 100 Ct Box - Large CertiFoam 25 SE is machined DV2010 48" x 96" x 1" Sheets TIG8845 90 Ct Box - X-Large square on all edges and pre- DV2015 48" x 96" x 1-1/2" Sheets TIG8846 90 Ct Box - 2X-Large scored on 16" and 24" centers for DV2020 48" x 96" x 2" Sheets flexible trimming on cavity wall 48" x 96" x 2-1/2" Sheets applications. 48" x 96" x 3" Sheets

EXPANDING FOAM CertiStud is our CertiFoam XPS with a plywood SEALANT furring stud 16” or 24” on center that helps maintain continuous insulation by eliminating the PowerFoam A single component, moisture-curing, thermal short steel or wood studs allow. Generally expanding polyurethane foam. Can set on concrete, used for wall applications. Available with treated brick, wood, metal, aluminum, and steel. Provides furring studs for exterior ground contact. insulation against heat and noise. Has R-5 equivalent value when used in place of traditional installation.

RA08130N 12 oz Can Power-Foam w/ Straw Applicator RA08132N 29 oz Can Power-Foam w/ Straw Applicator REINFORCED POLY Blue Stripe™ Reinforced Poly Film A heavy duty film that resists tears in ANY direction. Will protect work sites, materials, and equipment from rain, snow FIRE BLOCK FOAM or wind. SEALANT MK2012 12' x 100' MK2024 24' x 100' TriggerFoam Pro™ Fire Block MK2016 16' x 100' MK2032 32' x 100' A professional grade, gun applied, polyurethane MK2020 20' x 100' MK2040 40' x 100' foam sealant for blocking smoke and flame in Type V residential construction. More cost effective than fiberglass and caulks for this purpose. NOT A FIRESTOP. Adheres to wood, metal, masonry, and concrete. Seals gaps and joints, insulates, stops air POLY infiltration. Ideal for use around pipes, wires, and Plastic Sheeting ductwork. Thousands of uses. • Equipment Cover RA08133P 29 oz Can Trigger-Foam Pro Fireblock • Vapor Barrier RA08128 Deluxe Metal Gun For Trigger Foam • Insulation • Paint Protection More Sizes Available. • Moisture Barrier Give us a call!

042002 2 Mil - 4'2" x 200' 201006 6 Mil - 20' x 100' SPRAY FOAM 061004 4 Mil - 6' x 100' 201006B 6 Mil - 20' x 100' Black SEALANT KITS 061006 6 Mil - 6' x 100' 201008 8 Mil - 20' x 100' 081004 4 Mil - 8' x 100' 201010 10 Mil - 20' x 100' ® Handi-Foam Two-Component Foam 081006 6 Mil - 8' x 100' 202001.5 1.5 Mil - 20' x 200' A chemically cured polyurethane foam 082001.5 1.5 Mil - 8'4" x 200' 202002 2 Mil - 20' x 200' system. Consists of “A” component and 094007 .7 Mil - 9' x 400' 241004 4 Mil - 24' x 100' “B” component that mix in nozzle of the 101004 4 Mil - 10' x 100' 241006 6 Mil - 24' x 100' Handi-Gun. Resulting foam cures more 101006 6 Mil - 10' x 100' 281004 4 Mil - 28' x 100' quickly than one-component foams. 121004 4 Mil - 12' x 100' 281006 6 Mil - 28' x 100' 121006 6 Mil - 12' x 100' 321004 4 Mil - 32' x 100' HANP10600 II-12 Handi-Foam Spray Foam- Net Weight 1.76 lbs 161004 4 Mil - 16' x 100' 321006 6 Mil - 32' x 100' HANP10700 II-105 Handi-Foam Spray Foam- Net Weight 15.3 lbs 161006 6 Mil - 16' x 100' 401004 4 Mil - 40' x 100' HANP10720 II-205 Handi-Foam Spray Foam- Net Weight 29.9 lbs 201004 4 Mil - 20' x 100' 401006 6 Mil - 40' x 100'

14 MASONRY PRODUCTS

WASH BRUSH SCRUBS Plastic Block Floor, Deck, or Wall Densely filled with x shaped nylon, Scrub this brush will carry a lot of water or Our plastic block floor scrubs are made solution. The fill is soft but has plenty for where you need sanitary conditions. of body to clean the heaviest dirt. Plastic This block will not split, crack, or warp. One block, foundation type, one threaded handle hole, one threaded handle hole, 2” trim. tapered handle hole can be used with fountain hole. Bumper LB68712 Blue Polyester Fill - 12” can be added at a small cost. Specify when ordering, add the letter “B” to the end of the number.

LB1082 Green Fill - 10” WIRE BRUSH A favorite with painters and maintenance workers. 14” length will reach further and clean better. 4 rows of fill, 1-1/8” trim. BARN BROOM LB1162 Steel Wire with Scraper

HAND BRUSH LB592 16” Barn Broom - Orange This brush is ideal for general use. Heavy gauge plastic staple set in smooth sanded hardwood block. A brush with a lot of body to give Durable long lasting plastic will outlast natural fiber. Will not absorb you that extra long life. odors, mildew, rot, or discolor. Will not absorb water and rinses clean. Wide flare on ends allows close sweeping to curbs. LB608 8” Brush 2-1/2” Trim

UTILITY BRUSHES CEMENT COATER BRUSH

635 LB561 Best Grade White Tampico 634 Fiber staple set in clear lacquered hardwood block with 6-3/4" red handle attached. Block size: 6-1/2" L x 2" W. Length of Trim: 4". 636

633 WHISK BRUSH

Poli-block Utility or Fender Brushes LB885 10” Whisk Broom A low cost, high quality plastic block brush for all general cleaning. Sewed two times, cad. plated ring cap. These The block is moisture and bacteria proof. are the best quality whisk brooms for home, automobile, and office.

633 Synthetic Fill - Specify 8” or 20” 634 Union Fiber Fill - Specify 8” or 20” 635 Tampico Fill - Specify 8” or 20” 636 Palmyra Replacement Fill - Specify 8” or 20” 637 White Polyester Fill - Specify 8” or 20” CORN BROOM 638 X Shaped Nylon Fill - Specify 8” or 20” For Color Coded Plants or Where Color is Preferred 2637 Blue Polyester Fill - Specify 8” or 20” LB880 Corn Broom 3637 Red Polyester Fill - Specify 8” or 20” Made of best quality selected broom corn and 5637 Green Polyester Fill - Specify 8” or 20” fiber. Sewed 4 times and reinforced with a wire 2638 Blue X-shaped Nylon Fill - Specify 8” or 20” band. Made on a heavy duty handle. This broom 3638 Red X-shaped Nylon Fill - Specify 8” or 20” was designed for sweeping smooth and rough 4638 Yellow X-shaped Nylon Fill - Specify 8” or 20” surfaces.

15 MASONRY PRODUCTS

SHOVELS FIBERGLASS HANDLE SHOVELS EAGLE® Series Coated hardwood handle for strength. Open back, tempered-steel blade.

SRS700 AS15545 Square Point Shovel 44" Long Wood Handle SRS700D AS15543 Round Point Shovel 44" Long Wood Handle

SRS701D

SRS701

SHOVELS Structron Brand 700 Series feature heat-treated, high carbon polished True American Shovels steel for ultimate durability. PowerCore™solid fiberglass reinforcing Durable and dependable for general lawn and rod extends 12.5 inches from the handle into the shank for maximum garden work. Has an end grip that provides strength at this critical stress point. comfortable hand placement to grab tool. SRS700 Round Point 48" Fiberglass Long Handle Shovel The handle provides strength and durability to SRS700D Round Point 29" Fiberglass Handle with Poly D Grip withstand years of use. SRS701 Square Point 48" Fiberglass Long Handle Shovel SRS701D Square Point 29" Fiberglass Handle with Poly D Grip AS1564100 LHRP True American Shovel AS1564200 LHSP True American Shovel SHOVELS Kraft Shovels 48" long fiberglass handle. 14 gauge SHOVELS tempered steel blade for strength.

Razor-Back Contractor Shovels KRGG861F Square Point Kraft Shovel 48" sturdy, stained North American ash handle KRGG864F Round Point Kraft Shovel for long life. Industrial gauge open-back blade. Rolled-step to help prevent material build-up. Dual rivet, extended tab socket for added strength. SHOVELS AS45520 Round Point Razor-Back Shovel J-350 Series Blue Max Shovels AS44101 Square Point Razor-Back Shovel 14 gauge industrial strength blade. 48" North American ash handle. For professionals who need high quality features and durability.

ASBMDLR LHRP Blue Max Shovel (J-350 series) ASBMDLS LHSP Blue Max Shovel (J-350 series) SHOVELS Razor-Back Shovel with Wide Step Provides easy, hassle-free use. Ideal for a variety of tasks. Features large power step to maximize digging force. 48" SHOVELS durable fiberglass handle and end cushion grip for comfort. True American Wood Handle Shovels For frequent jobs and yard maintenance. A good AS2594400 LHRP Fiberglass Razor-Back Shovel with Wide Step value to anyone with landscaping and gardening requirements. AS1564400 True American DHRP Wood Handle Shovel AS1564500 True American DHSP Wood Handle Shovel SHOVELS Razor-Back Shovel DRAIN SPADE Ideal for lifting and moving heavy loads. Designed to transport loose material such as soil, sand, and gravel. Ames True American AS15609 Drain Spade with Poly D-Grip - 14" AS2594500 LHSP Razor-Back Fiberglass Shovel For tight spaces, digging narrow trenches, and cleaning out previously dug ditches. Forward turned-step for secure foot placement.

16 MASONRY PRODUCTS

NARROW LONDON 6" Wood Handle (Standard Shank) 5" Wood Handle (Standard Shank) Part # Blade Heel Width Part # Blade Heel Width PATTERN TROWELS RO116-9 9" 4-3/16" RO416-9 9" 4-3/16" RO116-9-1/2 9-1/2" 4-1/4" RO416-9-1/2 9-1/2" 4-1/4" RO116-10 10" 4-1/2" RO416-10 10" 4-1/2" RO116-10-1/2 10-1/2" 4-5/8" RO416-10-1/2 10-1/2" 4-5/8" RO116-11 11" 4-3/4" RO416-11 11" 4-7/8" RO116-11-1/2 11-1/2" 4-7/8" RO416-11-1/2 11-1/2" 4-7/8" RO116-12 12" 5" RO416-12 12" 5" RO116-12-1/2 12-1/2" 5-1/4" RO416-12-1/2 12-1/2" 5-1/4" RO116-13 13" 5-3/8" RO416-13 13" 5-3/8" W. Rose™ Trowels are made by a process which binds 6" Wood Handle (Low Shank) 5" Wood Handle (Low Shank) blade, ferrule, and tang as one piece, with select air- RO186-9 9" 4-3/16" RO486-9 9" 4-3/16" RO186-9-1/2 9-1/2" 4-1/4" RO486-9-1/2 9-1/2" 4-1/4" seasoned wood, leather, or plastic handles firmly RO186-10 10" 4-1/2" RO486-10 10" 4-1/2" attached to the tang. The W. Rose™ trademark gives RO186-10-1/2 10-1/2" 4-5/8" RO486-10-1/2 10-1/2" 4-5/8" you the excellent feel and balance that you expect. RO186-11 11" 4-3/4" RO486-11 11" 4-3/4" RO186-11-1/2 11-1/2" 4-7/8" RO486-11-1/2 11-1/2" 4-7/8" W. Rose™ Trowels RO186-12 12" 5" RO486-12 12" 5" Handles RO186-12-1/2 12-1/2" 5-1/4" RO486-12-1/2 12-1/2" 5-1/4" RO186-13 13" 5-3/8" RO486-13 13" 5-3/8" 5-1/2" Leather Handle (Standard Shank) 5-1/4" Plastic Handle (Standard Shank) RO1400 Clear amber 5-1/4" RO316-9 9" 4-3/16" RO1416-9 9" 4-3/16" RO100 Smooth comfortable grip plastic handle. Tough and rugged RO316-9-1/2 9-1/2" 4-1/4" RO1416-9-1/2 9-1/2" 4-1/4" 6" wood handle with steel ferrule. handle will not mushroom from RO316-10 10" 4-1/2" RO1416-10 10" 4-1/2" tamping bricks or concrete RO316-10-1/2 10-1/2" 4-5/8" RO1416-10-1/2 10-1/2" 4-5/8" blocks. RO316-11 11" 4-3/4" RO1416-11 11" 4-3/4" RO316-11-1/2 11-1/2" 4-7/8" RO1416-11-1/2 11-1/2" 4-7/8" RO316-12 12" 5-1/4" RO1416-12 12" 5" RO316-12-1/2 12-1/2" 5-1/4" RO1416-12-1/2 12-1/2" 5-1/4" Smooth comfortable grip ­RO400 RO316-13 13" 5-3/8" RO1416-13 13" 5-3/8" 5" wood handle with steel ferrule. RO1000 Special Soft Grip 6-3/4" 5-1/2" Leather Handle (Low Shank) 5-1/4" Plastic Handle (Low Shank) handle for the professional RO386-9 9" 4-3/16" RO1486-9 9" 4-3/16" mason. Made of soft but tough RO386-9-1/2 9-1/2" 4-1/4" RO1486-9-1/2 9-1/2" 4-1/4" PVC material. Hard Rubber RO386-10 10" 4-1/2" RO1486-10 10" 4-1/2" bumper fitted to end of handle. RO386-10-1/2 10-1/2" 4-5/8" RO1486-10-1/2 10-1/2" 4-5/8" RO300 5-1/2" Seasoned wood RO386-11 11" 4-3/4" RO1486-11 11" 4-3/4" handle wrapped with genuine RO900 Special Soft Grip Kit. RO386-11-1/2 11-1/2" 4-7/8" RO1486-11-1/2 11-1/2" 4-7/8" leather to provide a smooth Includes 1 soft grip cover, 1 RO386-12 12" 5" RO1486-12 12" 5" comfortable grip. Fitted with rubber bumper, 1 washer, and RO386-12-1/2 12-1/2" 5-1/4" RO1486-12-1/2 12-1/2" 5-1/4" steel ferrule. 1 screw. RO386-13 13" 5-3/8" RO1486-13 13" 5-3/8"

CAULKING MARGIN POINTING TROWELS TROWELS TROWELS

One piece forgings. Made from high carbon steel. Ground for flexibility and have a high shank and lift. One piece forged trowel. Made of high One piece forged trowel. Made of high grade steel. Tempered, ground, and grade steel. Tempered, ground, and polished for perfect balance and feel. polished for perfect balance and feel. BL761 7" x 3/16" Caulking Trowels Comes with hardwood handle. BL762 7" x 1/4" Caulking Trowels Comes with hardwood handle. BL763 7" x 3/8" Caulking Trowels BL764 7" x 1/2" Caulking Trowels GG431 5" x 1-1/2" Margin Trowel GG421 4-1/2" x 1-1/4" Pointing Trowels BL765 7" x 5/8" Caulking Trowels GG422 5-1/2" x 2-1/2" Pointing Trowels BL766 7" x 3/4" Caulking Trowels GG432 5" x 2" Margin Trowel BL767 7" x 7/8" Caulking Trowels GG434 6" x 2" Margin Trowel GG423 7" x 3" Pointing Trowels BL768 7" x 1" Caulking Trowels GG433 8" x 2" Margin Trowel GG424 5" x 2-1/2" Pointing Trowels

TROWEL HANDLE TIP Don't see what you need? BL104 Contact your local Farrell location or sales representative for Rubber tip for brick trowel handle. a complete list of available products.

17 MASONRY PRODUCTS

FLOOR SCRAPERS BRICK TONGS All steel construction. BC380 Brick Tongs This heavy-duty quick adjustable tong can carry from 6 to KRFC506 8" Floor Scraper with Adjustable Handle 10 bricks. Can’t damage bricks KRFC507 5 Pc Pack 8" Replacement Blades for KRFC506 and is designed for long wear. KRFC520 Heavy Duty 5" Scraper with 15" Handle 16" long. KRFC521 5 Pc Pack 5" Replacement Blades for KRFC520

FLOOR SCRAPER BRICK TONGS Ideal for after work clean up. Blades are firm but flexible. Comes with heavy-duty 5' shovel type wood handle. BC281 “Big Red” Brick Tongs CC214 14" Scraper New, improved, non-slip lock down CC218 18" Scraper to unload quickly and easily. Can’t CC222 22" Scraper damage bricks and is designed and CC207 14" Replacement Blade built for long wear. Fast adjustment CC208 18" Replacement Blade from 7 to 11 bricks. Made of malleable CC209 22" Replacement Blade iron with smooth wood handle.

FLOOR SCRAPER BRICK SPLITTER

T-Handle Floor Scraper Weighs 39 lbs. The opening is a full 5" high Includes 7" blade that shaves floor coverings on any so it can take a regular brick standing up at type of floor. Also scrapes carpeting. All steel “T” any angle. Blades are 4-1/2" wide. Cuts most handle is 54" long. Blades are replaceable. bricks now in use, and the cut will be accurate, as a 12" rule and square is built right in. GG393 7" Scraper GG394 7" Replacement Blade BC582 Mini Brick Splitter BC582-01 Set of Replacement Blades

HAND/FLOOR RUBS Vitrified Bonded Abrasives BRICKLAYER’S SET Forged from the finest tool steel, Removes form marks on concrete. well tempered, properly balanced.

BL232 8" x 2-1/2" BL233 8" x 3" BL234 8" x 4" Handle: For extra comfort and working BL235 8" x 5" overhead. Fluted: For extra shearing action. Plain: For cleaning castings and dressing bench grinding wheels. CHISELS

UA25040 6” x 3” x 1” Rubbing Stone with Handle UA25050 8” x 3-1/2” x 1-1/2” Rubbing Stone with Handle UA25062 8” x 2” x 2” Scored Rubbing Stone Fine Grit CC654 10" x 1-7/8" Concrete Chisel UA25030 8” x 2” x 2” Fluted Rubbing Stone CC671 10" x 2-1/2" CC655 10" x 2-7/8" Forged from the finest tool steel, well tempered, properly balanced.

SCYTHE STONE Plugging Chisel Specially designed with tapered blade to clean mortar joints easily UA120L Scythe Stone without binding. BL576 10" x 4-1/2" x 3/16" 10” x 1-5/16” x 9/16”

18 MASONRY PRODUCTS

A very powerful hammer BRICKLAYER’S HAMMER STONE MASON’S made of forged and HAMMER tempered steel. Comes with 16" wood handle.

BL333 3 lbs BL334 4 lbs ES3-20BL Steel Handle 20 oz Bricklayer Hammer BL337 6 lbs ES3-24BL Steel Handle 24 oz Bricklayer Hammer BL332 16" Replacement Handle

RAZOR-BACK SLEDGE INDUSTRIAL WATER/ HAMMERS GARDEN HOSE All rubber heavy duty hose with brass fittings. Also available in 3/4" diameter and 25, 75, & 100 ft lengths.

HS5001 5/8" x 50' Hose

Ames Razor-Back Sledge Hammer with Fiberglass Handle Constructed with a 34" fiberglass handle and forged with a steel head. Ideal for demolition of concrete, tile, and drywall. The HOSE WASHERS HOSE MENDER patented head to handle connection has a reinforced steel pin for improved safety.

HSDM6 HSTVW7 Garden Hose Washer 3/4" AS3111000 4 lb Razor-Back Sledge Hammer with Fiberglass Handle Steel Hose Mender 3/4" AS3112000 6 lb Razor-Back Sledge Hammer with Fiberglass Handle HSKRW25 Rubber Hose Washer 2" Not for compressible products such AS3113000 8 lb Razor-Back Sledge Hammer with Fiberglass Handle HSKRW35 Rubber Hose Washer 3" as air, nitrogen, or steam. AS3115000 10 lb Razor-Back Sledge Hammer with Fiberglass Handle AS3116000 12 lb Razor-Back Sledge Hammer with Fiberglass Handle INSULATED HOSE NOZZLE HSSN75 Heavy-duty brass valve and adjusting nut. SLEDGE HAMMERS Hold open clip locks any spray pattern. Handles hot water up to 180° F. Drop forged high carbon steel heads, heat treated with hardwood hickory or fiberglass handles. CONTAINERS AS11968 3 lb Fiberglass 16" Sledge Hammer AS11969 4 lb Wood 16" Sledge Hammer BRUTE® Round Containers AS11970 4 lb Fiberglass 16" Sledge Hammer Durable, heavy-duty containers for a AS11974 6 lb Wood Handle Sledge Hammer variety of uses. Built with trademark AS11976 6 lb Fiberglass Handle Sledge Hammer AS11979 8 lb Sledge Hammer with Wood Handle durability and toughness. Feature AS11988 8 lb Sledge Hammer with Fiberglass Handle newest innovations to improve AS11991 10 lb Sledge Hammer with Wood Handle productivity and ease-of-use. AS11993 10 lb Fiberglass Handle Sledge Hammer AS11994 12 lb Sledge Hammer with Wood Handle AS11996 12 lb Fiberglass Handle Sledge Hammer RUB-FG264300GRAY 44 Gal Brute Container without Lid AS11997 16 lb Wood Handle Sledge Hammer RUB-FG265500GRAY 55 Gal Brute Container without Lid AS11244 20 lb Wood Handle Sledge Hammer RUB-FG264000BLA SF Brute Dolly

Replacement Handles American Hickory (supplied with wood & PAIL metal wedges where applicable). FA1000 5 Gallon Plastic Bucket White plastic. Wide range of uses at any work site. AS20024  Replacement Handle For 20 lb Sledges AS20362  Replacement Handle For 6-16 lb Sledges FA1001 Lid Snug fit, easy on and off.

19 MASONRY PRODUCTS

MORTAR BOARD MORTAR GUNS STANDS

All metal rugged construction for years of use. Folds for convenient *Drill Sold Separately storage.

KRBC291 20" X 30" Mortar Board Stand

MORTAR BOARD

QuikPoint Mortar Guns • Uses all standard and pre-mixed pointing mortars. • Excellent mortar penetration. Vibrator fed auger drive assures constant mortar bead. • Unbreakable polyurethane body and nozzle holder. Takes just 10 seconds to reload 1/2 gallon hopper. • Quick clean up in less than a minute simply by flushing with GAT1000 GATORBACK™ Mortar Board water. Dimensions: 24" x 26" x 0.75". Keeps mortar workable and • Portable, weighs only 7 lbs (approximately 13 lbs loaded). consistent to decrease time and waste. Pound for pound, the • Specially designed nozzle with 3 interchangeable steel tips lightest, most durable mortar board that won’t slinter or chip and (Small: 3/16" X 0.8", Medium: 1/4" X 0.8", and Large: 0.55" X lasts 3 times longer than wood boards. 0.66"). Nozzle rotates for horizontal and vertical joints.

GROUT BAGS QPT1964 Quickpoint Drill-Mate Mortar Gun Cone shaped heavy duty vinyl bag comes with removable metal tip. GROUT SCOOP WL013 10-1/2" x 24" Large Bag DUVS100 Vers-A-Scoop WL015 3/8" Replaceable Tip For low lift grout. Makes it easy to scoop and WL014 15" x 28" Giant Bag pour where you want. Rugged one piece plastic WL019 7/16" Replaceable Tip construction. Lighter than a bucket , easier than a shovel. Capacity: 1/2 cu ft.

BRICK HUBBARD JOINTERS JOINT RAKER JOINTERS

More knuckle clearance, replaceable blades, Made of high carbon steel, each end long lasting. Jointer comes assembled with makes a different size joint. Overall one 3/4", one 7/8" blade, and one 5/8" blade length: 10 1/2". loose in package. BL210 Joint Raker Wheels are 1-3/4" in diameter, mounted BL260 3/8" x 1/2" Brick Jointers BL280 Hubbard Jointer 1-3/4" apart. Overall width is 3". Has BL261 1/2" x 5/8" Brick Jointers BL281 1/2" Replacement Blade 8-1/2" aluminum handle that is squared BL262 5/8" x 3/4" Brick Jointers BL282 5/8" Replacement Blade off at the end so you can rod joints. BL264 3/4" x 7/8" Brick Jointers BL283 3/4" Replacement Blade Hardened nail is adjustable for depth. BL265 7/16" x 1" Brick Jointers BL284 7/8" Replacement Blade

20 MASONRY PRODUCTS

CONTRACTOR MORTAR BOX Steel Mortar Box Made of heavy duty 16 gauge WHEELBARROW steel. Smooth interior makes Brentwood Heavy Duty mixing easier. Wheelbarrow BC206 50" x 29" x 12" (6 cu ft) Professional grade wheel- barrows are built for ma- BC209 60" x 32" x 12" (9 cu ft) sonry, concrete construc- BC215 78" x 38" x 12" (15 cu ft) tion, demolition, rough job sites. Lacquered hardwood handles. UV resistant .275" thick HDPE pan. Wheels with heavy duty ball bear- MORTAR ings and grease fitting. Cushioned grip handles. BOX

BRE-BW6S 6 cu ft Wheelbarrow BC210 Steel Mortar Box BRE-ACWB20480 10 cu ft Wheelbarrow 10 cu ft Made of 10 gauge heavy duty steel. 6” forklift clearance. Joints lapped with continuous welds for extra strength.

CONTRACTOR WHEELBARROWS MORTAR BOX Heavy Duty Contractor Kraft BC211 Wheelbarrows 10 Cu Ft Steel Mortar Box Outlasts and outperforms all with Casters other brands on the job. Special The Mud Dobber Mortar deep, narrow tray design, Box: Reinforced 1" steel and far forward position on handle and easy-turn heavy undercarriage mean easier duty 8" casters. Steel mortar lifting, transport, and discharge. box is made of heavy duty Carry heavier loads with less 16 gauge steel and leak effort. proof.

ST530-16-42DB Metal Tub with Air Tire ST530-16-42DB-FF Metal Tub with Flat Free Tire STDWB-530-42 Metal Tub with Dual Air Tires

HOG TROUGH™ CONTRACTOR WHEELBARROW Ames Jackson® Poly Contractor Wheelbarrows Jackson® wheelbarrows are the professional's choice for EZHTP10 Poly Hog Trough superior quality, value, and 10 cu ft capacity. Virtually indestructible. Lightweight (60 lbs). Easy performance. to clean, non-stick surface.

Heavy duty steel or poly trays, professional grade steel undercarriages, and strong hardwood handles add up to the toughest, most dependable wheelbarrows on the jobsite. BRICK BARROW BON28-712-B5 Brick Wheelbarrow ASM6T22BB 6 cu ft Steel Tub with Air Tire with Air Tire ASMP575T22BB 5 3/4 cu ft Poly Tray Made from hardwood. Full 3/4" thick ZAS00038400 Wheel Assembly for Jackson Wheelbarrow bed and dash boards. Undercarriage and ZAS00221100 Handle for Jackson Wheelbarrow legs made from steel channel. Wheel ZAS00937301 Bearing For Jackson Wheelbarrow equipped with zerk fittings.

21 MASONRY PRODUCTS

CONCRETE BUCKETS RUBBER ACCORDION The Round-Gate Concrete Bucket is 30-50% lighter than HOPPERS most standard steel buckets of the same capacity. The double clamshell 16" diameter gate featuring the patented Garbro venturi throat is non-jamming, grout tight, and self closing. Attachments are available 409-E including hoppers, side chutes, air-operated gate Confine concrete systems, and extension collars. when pouring into narrow forms and RATED LEVEL OUTSIDE LOADING prevent segregation MODEL CAPACITY CAPACITY DIAMETER HEIGHT WEIGHT due to free fall. NO. CUBIC YARDS CUBIC FEET INCHES INCHES POUNDS Fastened to the 410-R 1/3 10.0 38 34 237 413-R 1/2 13.5 38 41 257 bucket gate, the 420-R 3/4 20.3 47 44 316 hopper opens and 427-R 1 27.5 56 46 400 closes with the gate 440-R 1-1/2 40.5 63 53 491 itself to control spillage and ensure proper 454-R 2 54 70 58 642 flow control. When grounded, it folds under 483-R 3 83 70 72 800 the bucket.

MINI CONCRETE CONCRETE MIXER MIXER

MQWM90SH8 MQMC3PEA Mix-N-Go 9 Cu Ft Concrete Mixer with 3 Cu Ft Poly Tub Concrete Mixer Honda GX240 Motor Ultimate heavy duty concrete with Stand 3/4HP Electric Motor mixer. Powered by Honda Durable, versatile and ideal for GX240 engine. Heavy duty users of all skill levels. Perfect for tubular steel frame with small footings, bases, patching. forklift pocket. Rugged 14 Use as a wheelbarrow or with a gauge steel engine cover stand. Thick polyethylene drum resists vibration. Spring resists rust and dents. Highly durable. suspension standard for less Gears immersed in oil for long trouble-free lift. bounce and sway. Powder coat paint with a long-lasting finish.

MORTAR & POWER MIXER PLASTER MIXERS COL-X01 Professional Hand-Held Power Mixer Designed to increase Optimum performance and perfect ergonomics. Easy your productivity to operate with a straight back and ergonomically and reduce routine shaped grip handles. State-of-the-art motor and gear maintenance, Crown unit components for long service and safety while mixers have all the working. 0 - 650 rpm. features you demand and the quality you Paddle Options expect. We back it up COL-KR120HF Grout Mix 5 Paddle COL-WK120HF Crete Mix 5 Paddle with a comprehensive COL-KR140HF Grout Mix 15 Paddle COL-WK140HF Crete Mix 15 Paddle COL-KR160HF Birdcage Paddle for COL-XO1 Professional Handheld warranty and Power Mixer unparalleled service at XL Batch COL-MK160HF Heavy Mix 20 Paddle a price. Bag Capacity: 6 cu ft = 2-2-1/2 6 cu ft = 2 1/2 - 3. MORTAR HOE CRN609717M 6 cu ft Mortar Mixer with 5.5 HP Honda CRN609917M 8 cu ft Mortar Mixer with 9 HP Honda CRN609958 9 cu ft Concrete Mixer with 9 HP Honda CRN609970M 8 cu ft Mortar Mixer with Spiral Blades BC228 Heavy-Duty Mortar Hoe & 9 HP HoEA Has two holes for better mortar mixing. 66" shovel type wood handle. 6" x 10" Blade.

22 MASONRY PRODUCTS

GROUT HOG™

Grout-Hog™ Grout Delivery System Finally, a grout delivery system that’s simple, dependable, and timesaving. Designed by a mason for masons. Grout Hog will deliver materials such as sand, cement, and even 3/4” aggregate mixes. Can be operated with one man on scaffold and one man on forklift.

Average unloading time: 4 yds in less than 1/2 an hour. Swivel allows 20’ of wall grouting without moving forklift. Has fewer moving parts and is nearly impossible to plug, as opposed to grout pump.

Can be used with any type of scaffold from either side or opposite side of the wall. Hooks to auxiliary hydraulics on your fork lift. Grout can be easily controlled at point of discharge. Grout hog costs about 1/3 the price of a small grout pump. RENT ME GHP-75 with Crane Bail GHP-75 Gas Powered Grout Hog - with crane bail powered by 11 HP Honda GH-75 Hydraulic Powered Grout Hog - 3/4 cu yd capacity hooks to auxiliary hydraulics of fork lift

UPHILL GROUT HOG™

All the features of the original and more: Extended discharge arm saves several feet of boom extension on your forklift. Decreased head height allows pouring up close to bar joist on interior walls. Makes grouting from the scaffold side of the wall easier. Will handle up to 1/2 inch aggregate with virtually no plugging. Removable auger and hopper tilt allows for 15 minute clean up.

MUD HOG® Mud Hog® MH20 Mixing Station 20 cu ft capacity. 13 hp Honda engine with electric start. Hydraulic drive and hydraulic dump. Load height: Minimum 36". Dump Height: Maximum 56". Fork lift pockets from any side. Fits standard 8 ft truck bed. Use bag mixes or on-site mixing tower. Dumps directly into Grout Hog®. Complete with adjustable stand.

Triple use: grout, concrete, and mortar. Becomes a portable batch plant for mixing grout on site. Compacts to fit into standard 8' truck bed. Ideal for use with silo mix or bag mixes. Hydraulic dump and drive. Reversible mixing paddles prevent clogging. Vertical paddle orientation to minimize splashing and cut through material. Loads below waist level and dumps high with adjustable heights to optimize ergonomic operation. Fork pockets accessible from all sides. Adjustable legs and outriggers for stability. Dumps into the Grout Hog® for easy masonry block filling. Manual recoil and electric start.

Mud Hog® MH12 12 cu ft capacity. Triple Use: mortar, grout, and concrete. Available with solid dust cover for pre-blended mix tower application.

Adjustable legs provide stability on unlevel surfaces and keep it out of the mud. The most durable, best designed mixer on the market.

23 MASONRY PRODUCTS

MASONRY SAW MASONRY SAW

MS 360 Masonry Saw Guardmatic® MS610 Stand not Offers precision like no other and included Gas or Electric Perfect for large jobs cutting Blade not included has an exceptional cutting depth block, brick, or pavers. Available up to 5'' deep for a standard 14'' with a 20" blade capacity, the blade. The sturdy, rigid design sturdy, rigid design makes it makes it suitable for large jobs stable enough to cut large, heavy cutting block, brick, or pavers. blocks and is able to cut a 8" x 8" Rotates for 22.5° and 45° bevel x 16" block in one pass with a 20" cuts and switches easily between blade. Optional clutch ensures plunge and miter cutting which that your blade doesn't spin while makes is fast and versatile on idling. The 13 HP Kohler Engine the job site. The patented water ensures you will have enough containment system facilitates power for all your cutting needs. clean work area.

TABLE SAW

IQP-IQ360 HUS07-967285201 MS360 Masonry Saw with 1.5 hp Motor Dust Control Table Saw with #Q3-RT Rolling Table HUS07-967318201 MS360G 14" Gas Masonry Saw with 4.8 hp Honda Cut dry with no dust: brick, pavers, stone, veneer. Tested to HUS07-585581601 Adjustable Rolling Stand For #MS360 Masonry Saw capture up to 99.5% of the dust. HUS07-589909901 Vac Attachment For #MS360 Masonry Saw • No water – 100% dry cutting • Collect up to 99.5% of the dust • Cut right where you work, even indoors • Eliminate dust cleanup and problems • Stop breathing hazardous silica dust DUST EXTRACTION If you have to pay one guy $15/hour to clean up dust every day for one hour, that adds up to $300 a month. If your guy has to S26 Hepa Dust Extractor 3.2 Hp 120 Volt walk outside or across the job site to make every cut, doing 150+ Single Phase cuts a day while hauling materials, A powerful single-phase HEPA dust he spends an hour or more just collector to match Husqvarna PG 280, walking back and forth, another PG 450, and Soff-Cut 150. Matches small $300+ a month. Just using those scarifiers, shot blasters, and handheld figures–which are conservative– power tools. Suitable for building, grinding, that is $600 per month or $7,200 plaster, and concrete dust. Equipped with a year. Have you ever had to power wash a building? Pay for a two tested and certified HEPA H13 filters. customer's car wash? Pay to clean Features Jet Pulse pre-filter cleaning, their windows? Most of us have hour counter, and vacuum meter for filter experienced at least one of these. control. Non-marking wheels are puncture They’re rarely cheap, never fun, and free and lock at front. Longopac® bag they cut straight into your profits. hose system ensures simple changes.

The iQ360x™ eliminates 1) dust cleanup 2) wasted time 3) the cost of marginally effective controls. DUST COLLECTION Husqvarna Dust Collection Vacuums Versatile high performance dust collectors. Lightweight CONTAINMENT SHROUD and easy to transport. DustBuddie Dust Containment Shroud Equipped with automatic Fits most hand grinders including filter cleaning. Can be Makita, Bosch, Dewalt, and more. used for wet and dry It captures up to 99% of airborne applications. Includes particles for outstanding dust control. hoses and accessories.

DTSD1835 4”- 5” Dust Buddie with Universal Arbor & 18” Hose DTSD1850 7”- 9” Dust Buddie with Universal Arbor & 18” Hose HUS07-967320301 DC1600 Dust Collection Vacuum DTSD1846 75" Cut Buddie Dust Shroud HUS07-967299603 DC3000 Dust Collection Vacuum

24 MASONRY PRODUCTS

Water Hookup Kit & Abrasive MASONRY SAW CUT-OFF SAW Wheel included. Diamond wheel (shown) sold separately. IQP-IQMS362 STL01-TS700-14 16.5" Dry Cutting Masonry Saw with 14" STIHL Cutquik® Integrated Dust Control Lightweight, well balanced, and Engineered to overcome the common features new 5 point, dual element vibration control system for comfort limitations of most masonry saws. The and semi-automatic belt tensioner. proprietary Q-Drive™ blade incorporates Displacement: 6.0 cu in, Engine the latest in diamond tool technology Power: 6.7 bhp. Weight: 25.6 lbs. with a diamond layout in the matrix, spacing, and segments designed to reduce turbulence and dust. Water Hookup Kit & Abrasive CUT-OFF SAW Wheel included. Diamond wheel (shown) sold separately. STL01-TS500-14 14" STIHL Cutquik® CUT-N-BREAK Lightweight, well balanced, and SAW features new 5 point, dual element vibration control system for comfort HUS06-968388402 and electronic fuel injection. K3000 Cut-n-Break Displacement: 4.41 cu. in. Engine A completely new Power: 5.2 bhp. Weight: 22.5 lbs. electric power cutter, featuring our unique Cut-n-Break method, which allows you to make cuts up to 400 mm deep at a very low tool cost. Includes set of blades. Water Hookup Kit & Abrasive CUT-OFF SAW Wheel included. Diamond wheel (shown) sold separately. STL01-TS800-16 CUT-N-BREAK SAW 16" STIHL Cutquik® The most advanced STIHL Cutquik® ever produced. The TS 800 is well HUS06-966481901 balanced and features a brand new K760 Cut-n-Break 5 point, dual element vibration Enables cutting up to 16" deep control system for exceptional from one side. Two high-speed operator comfort. The TS 800 is blades make a core in the saw the right choice for professionals cut, which can then easily be that need to make cuts up to 6" deep. Displacement: 6.0 cu in, broken off using the accompanying Engine Power: 6.7 bhp. Weight: 28.7 lbs. breaking tool. This way you easily work RENT your way through the material, at a very low ME diamond tool and maintenance cost. CUT-OFF SAW IQP-IQPC-912 12” Power ENGINE OIL Cutter with Integrated High Performance 2-Cycle Engine Oil Dust Control System STL09-0781-313-8004 6 Pk 2.6 oz HP Ultra Oil - 1 Gal Mix First power cutter with STL09-0781-313-8010 6 Pk 6.4 oz HP Ultra Oil - 2.5 Gal Mix integrated dust collection. STL09-0781-319-8008 6 Pk 2.6 oz 2 Cycle Oil - Mix 1 to 1 Gal Gas 100% dry cutting. Collects up STL09-0781-319-8009 6 Pk 6.4 oz 2 Cycle Oil - Mix 1 to 2.5 Gal Gas to 90% dust. Eliminates dust STL09-0781-319-8010 6 Pk 12.8 oz 2 Cycle Oil - Mix 1 to 5 Gal Gas STL09-0781-319-8051 6 Pk 5.2 oz 2 Cycle Oil - Mix 1 to 2 Gal Gas cleanup, slurry, and wet-cutting problems.

CUT-OFF SAW Water Hookup Kit & Abrasive CUT-OFF SAW Water Hookup Kit & Abrasive Wheel included. Diamond wheel Wheel included. Diamond wheel (shown) sold separately. (shown) sold separately. STL01-TS410-12 STL01-TS420-14 TS 410 STIHL Cutquik® The TS 420 STIHL Cutquik® Cut-off machine with a 12” cutting Cut-off machine—one of the best we’ve ever built. wheel. Features the X2 air filtration Helping you work longer and more comfortably, system and an anti-vibration this cut-off machine comes with system for comfort, ease of a 14” wheel, delivering a unique use, and easy maintenance. blend of performance and Displacement: 4.07 cu in. efficiency. Displacement: 4.07 Engine Power: 4.4 bhp. Weight: cu. in. Engine Power: 4.4 bhp. 20.7 lbs. Weight 21.2 lbs.

25 MASONRY PRODUCTS

CUT-OFF SAW RING SAW K770 Cut-Off Saw K970 Gas Powered A 14” 5 HP cut-off saw with Ring Saw features that make it one of the First 14" gas powered best power cutters on the market. saw with a 10" cutting Includes new generation Active depth. Has the Air Filtration™ that delivers up to maneuverability and one year’s operation without filter versatility of a gas- change and SmartCarb™, a built-in automatic filter compensation powered saw, giving you and a highly efficient vibration dampening system. the best of both worlds.

CUT-OFF SAW RING SAW K970 Cut-Off Saw K3600 MKII Latest and most powerful Hydraulic Ring Saw handheld power cutter. A saw whose performance Features X-Torq® engine and features make it unique. technology. It is a unique The only hydraulic cutter in the machine, in a class of its world that is capable of cutting own when it comes to emission levels, 10" deep with a 14" blade. efficiency, and maneuverability. Blade sold separately

HUS06-966477101 K970 14” Gas Saw HUS06-966477201 K970 16” Gas Saw BRICK & MORTAR SAW KIT ARB-AS170 CUT-OFF SAW Arbortech Brick & Mortar Saw Kit Has ability to cut square, deep, and safe. Comes K4000 Electric Saw - Wet with a new, dust resistant motor. Patented cutting action means virtually no fly dust, One of the world’s most powerful RENT improved reliability, faster cutting speed, and and versatile electric saws. 2.5 hp ME durability in the toughest work environments. The only small, inherently safe, motor, ergonomic design, and deep handheld brick and mortar saw on the market. cutting capacity, it's the best in its class. Cutting depth for 14" blade is 5". ARB-BLAFG1110 Arbortech General Purpose Blade HUS06-968378401 K4000 14” Electric Saw - Wet General cutting for brick and mortar to 115mm depth. Economical solution for general masonry cutting tasks, cutting tree-stumps, or wood through dirt and sand. Suitable for: mortar, aerated concrete, fibre board, limestone, weather board, composites, soft-medium brick, plastic, wood and buried roots. CUT-OFF SAW Max cutting depth: 4-1/2". K2500 16" Hydraulic Saw ARB-BLAFG4110 Arbortech Plunge Blade Hydraulic pressure is a smooth, efficient source Used for square and deep precision cuts into masonry walls of power. Not surprisingly, our hydraulic- without overcutting. Ideal for single brick removal, installation powered cutters are remarkably light, of electrical boxes, vents, etc. High precision cutting of square easy to handle, robust, and powerful. holes without overcutting the corners. Max cutting depth: Equipped with a 16" blade. 4-3/4".

HYDRAULIC POWER PACK ENGINE OIL PP518 Power Pack Husqvarna 504067201 2 Cycle Oil A gas-powered power pack for hydraulic 50:1 Ratio. A synthetic blend designed for power products such as DM 406 H drill motor, K3600 cutters and any other 2 cycle equipment used in MK II, and K2500 power cutters. Fuel-saving tough dirty conditions Lowers engine operating automatic power-on-demand. Adjustable lengths. temperatures. Reduces smoke. Includes fuel Can be switched off when constant power is stabilizer. desired. Compact size, large pneumatic tires, and convenient folding handle. HUS07-504067201 6 Pack 2.6 oz 2 Cycle Oil - Mix 1 to 1 Gal Gas HUS07-504067301 6 Pack 6.4 oz 2 Cycle Oil - Mix 1 to 2 1/2 Gas

26 MASONRY PRODUCTS

CUT-N-BREAK BRICK BUSTER BLADES

Diamond Cut-n-Break Blades HUS01-543088823 EL35CnB Set of 2 Cut-n-Break Blades for Gas Saw HUS01-582577701 HUS01-576778401 EL10CnB Set of 2 Cut-n-Break Blades for Electric Saw 14" Brick Buster Diamond Blade Demolishes brick. Long life. For fast, smooth cutting on a variety of critically hard masonry, concrete, and stone materials. Total segment RINGSAW BLADES height is .500" (.400" diamond depth; .100" segment base). Fast cutting with depths up to 10”. Wet Cutting ELR70 (Blue-Red) For concrete block, green concrete, limestone, lava rock, slate rock, shale, and sandstone. FARRELL GREEN & GOLD Suitable for cutting through very abrasive, TURBO BLADE softer material and has excellent speed and life.

ELR45 (Blue) A general purpose blade for cutting Green & Gold “Turbo” Dry materials including concrete less than Diamond Blade 6,000 psi tensile strength, lightly reinforced Fast cutting, extra long life when cutting concrete, pipes, and other precast concrete. cured concrete, masonry, stone, and brick pavers.

HUS01-531100708 ELR 70-Red 14” Ringblade for Block HUS01-542793832 12” Green & Gold “Turbo” Dry Diamond Blade HUS01-531108059 ELR 45-Blue 14” Ringblade for Cured Concrete HUS01-542791914 14” Green & Gold “Turbo” Dry Diamond Blade

GENERAL PURPOSE FARRELL GREEN & GOLD BLADE NEXT GENERATION BLADE

Badger Diamond Blade Fast cutting through brick, block and concrete on the first pass. Fast, smooth High Speed Segmented Premium cutting on a variety of critically hard General Purpose Diamond Blade concrete, stone, and masonry materials. For extra long life when cutting cured concrete, masonry, stone, and concrete pilings HUS01-579862001 12" "Badger" Dry Diamond Blade with steel, culvert pipe with steel, and brick pavers. HUS01-579860101 14" "Badger" Dry Diamond Blade HUS01-579860102 16" "Badger" Dry Diamond Blade DIA53742 14” Farrell Green & Gold Diamond Blade

BLOCK BUSTER FARRELL PREMIUM GREEN & GOLD BLADE

Block Buster Diamond Blade High Speed Segmented Demolishes block. Long life. Maximum Premium General Purpose Diamond Blade For extra long life when cutting cured concrete, life while cutting block, abrasive block, masonry, stone, and concrete pilings with steel, soft brick, concrete pavers, and green culvert pipe with steel, and brick pavers. concrete. HUS01-590531 12” x .110 x 1” 20mm Premium HUS01-582578101 14" Farrell "Block Buster" Diamond Blade HUS01-590524 14” x .110 x 1” 20mm Premium HUS01-582588901 20" Farrell "Block Buster" Diamond Blade HUS01-590618 16” x .125 x 1” 20mm Premium

27 MASONRY PRODUCTS

HARD BRICK/STONE MASONRY CUTTING DIAMOND BLADES DIAMOND BLADES

BB8 Blockbreaker Diamond Blade A general purpose blade for cutting a variety General purpose blade. Cuts abrasive block, of materials including cured concrete and soft brick, and some concrete pavers. A crisp, brick. This blade is made for dry or wet smooth, and chip-free edge is important for cutting, is diffusion bonded, and is a quality cutting abrasive materials. grade level product. HUS01-542751719 14" BB8 Blockbreaker Diamond Blade HUS01-542751720 20" BB8 Blockbreaker Diamond Blade HUS01-594076601 10 Pack 14" Cost-Cutter Diamond Blades

HARD BRICK/STONE CURED CONCRETE DIAMOND BLADES BLADES Husqvarna Vanguard Series. General Purpose, Abrasive Materials, VH-5 Series Asphalt Blades For general purpose cutting of cured A free-cutting 1/2" segment for extended concrete and brick. Total segment life. Two wear indicators on each segment height is .400” diamond depth. to identify usage and remaining life. Cooling holes for maximum depth control.

HUS01-542774462 12” VH-5 Dry Diamond Blade HUS01-542778735 14” HS-5 Cured Concrete Blade HUS01-542774463 14” VH-5 Dry Diamond Blade

GENERAL PURPOSE CURED CONCRETE DIAMOND BLADE BLADES

Husqvarna HI Series General Purpose, Abrasive Husqvarna Barracuda™ Material Blades Multi-Application Blades For fast cutting materials on the first pass, For fast, smooth cutting on almost any such as cured concrete and brick. Only all- masonry, tile, stone or hard concrete purpose diamond blade with aggressive material. This blade is not recommended notched segments which grab and grind for abrasive materials like block and material for a rapid first cut. Total segment asphalt. Total segment height of .350”. height is .475” HUS01-542774540 12” HI-5 Dry Blade for Cured Concrete / Brick HUS01-772182 14” Dry Diamond Blade for Cured Concrete/Masonry HUS01-542774541 14” HI-5 Dry Blade for Cured Concrete / Brick

SMALL DIAMETER DIAMOND BLADES DIAMOND BLADES TSD-S Dri Disc Wet and Dry Cutting Diamond Blade Barracuda™ Small Diameter Target's most affordable Diamond Blades segmented blade for cutting For cutting almost any masonry, a wide variety of materials tile, stone, or hard concrete material. including concrete, masonry, brick, and stone.

HUS01-580002 4-1/2” Barracuda Dry Diamond Blade HUS01-580604 7” Barracuda Dry Diamond Blade HUS01-773039 4-1/2” TSD-S Dry Diamond Blade HUS01-580083 8” Barracuda Dry Diamond Blade HUS01-773046 7” TSD-S Dry Diamond Blade

28 MASONRY PRODUCTS

DIAMOND BLADE TILE BLADES Wet Cutting Vari-Cut Porcelain Tile Blade Ideal for long cutting. The maximum cutting length of 700 mm and the table allows you to Small Diameter Diamond Blade cut 50x50 cm tiles diagonally. Our most affordable segmented HUS01-542774131 4" Vari-Cut Porcelain Tile Blade blade for fast cutting a wide variety HUS01-542774037 7" Vari-Cut Porcelain Tile Blade of materials including concrete, HUS01-542774038 8" Vari-Cut Porcelain Tile Blade masonry, brick, and stone. Total HUS01-542761284 10" Vari-Cut Porcelain Tile Blade segment height is .275”.

HUS01-FA4508CDUX22 4-1/2” x .080 Dry Diamond Blade CUP WHEELS

A16 - Type 11 TUCKPOINT BLADE Aluminum oxide grain. Coarse grit wheel for tough grinding applications. For cleaning castings, mold marks, removing flashing. Max RPM 7,250 rpm. Diamond Tuckpoint Blade Quickly remove mortar between UA26013 for Metal - 5" Diameter, 2" Width, 5/8-11 Bore brick and block. Total segment UA26014 for Concrete - 5" Diameter, 2" Width, 5/8-11 Bore height is .400”.

WIRE BRUSHES & HUS01-FA4525CDPX2 4-1/2” x .250 Dry Diamond Blade WHEELS 5/8-11 Arbor.

SANDWICH BLADE UA03414 2-3/4" Knotted Wire Cup Brush Small Diameter Diamond UA06513 3-1/2" Crimped Wire Cup Brush Tuckpoint Blades UA03410 6" Knotted Wire Cup Brush UA03426 4" Knotted Wire Wheel Features double row of tuckpointing for aggressive mortar removal. Total segment height of .400”. DIAMOND GRINDING DISCS HUS01-542774614 4.5” x .250 x 7/8-5/8 Sandwich Blade Tornado Single Rim for fast removal on concrete, masonry, stone and similar materials.

Hurricane Double Rim for long life and smoothest CRACK CHASER BLADE finish on concrete, masonry, stone, and similar materials.

Cyclone Turbo Rim for faster and smoother finish on Bevel Diamond Tuckpoint concrete, masonry, stone, and similar materials. For (Crack Chaser) Blade faster grinding with extended life. For crack chasing and mortar removal between brick and block. A great multi-purpose blade for the HUS04-FA04GDDDX1 4” x 5/8-11 Tornado Single Rim Diamond Disc restoration market. Total segment HUS04-FA04HDDGDX2 4” x 5/8-11 Hurricane Double Rim Diamond Disc height of .525”. HUS04-FA04HDDSX1 4” x 5/8-11 Cyclone Turbo Rim Diamond Disc HUS04-FA07HDDDX1 7” x 5/8-11 Tornado Single Rim Diamond Disc HUS04-FA07HDDGDX2 7” x 5/8-11 Hurricane Double Rim Diamond Disc HUS04-FA07GDDSX1 7” x 5/8-11 Cyclone Turbo Rim Diamond Disc HUS01-FASHM0401 4” Crack Chaser Diamond Blade

29 MASONRY PRODUCTS

LINE BLOCKS MASON'S NYLON 4" Wood Line Blocks LINE Block pairs grip the wall tightly. Won't split or break. BL350 Wood Line Blocks 4" Bulk Pairs BL349 4-1/4" Bulk Pairs BL348 4-1/4" Carded Pairs Bonded Braided Nylon Line This ultra strong bonded line is longer wearing. The extra elasticity helps eliminate sagging. Has a black flecked braid. SNAP-OVER LINE TWIGS KRBC352 500’ Roll Mason Line Braided (Black & White) KRBC353 500’ Roll Mason Line Braided (Black & Orange) KRBC354 500’ Roll Mason Line Braided (Black & Green) BL156 Manufactured from spring steel. Snap around mason’s line and eliminate sagging. Packaged (14) per. 4" Long x 5/8" Wide. STRING REELS LINE PINS Stringliner® Pro Reloadable Reels Extremely easy to reload. Has a handy BL158 rewind crank and auto-rewind with power Made of tempered steel. Stiff and long enough to hold the line. driver capability. Packaged (4) per. 6" size. WP25459 Reloadable Reel with 500’ Neon Orange Mason Line WP25462 Reloadable Reel with 500’ Neon Pink Mason Line WP25465 Reloadable Reel with 500’ Neon Yellow Mason Line LINE STRETCHERS

BL147 Adjustable Line Stretcher Works on various size blocks from 4" to 12". Sold MASON in pairs. Stretches line tight between blocks. WP35790 1000 ft Black & White Braided Mason Line LINE WP480NG 500 ft Neon Green Braided Mason Line WP480NO 500 ft Neon Orange Braided Mason Line WP480NP 500 ft Neon Pink Braided Mason Line WP480NY 500 ft Neon Yellow Braided Mason Line MASONRY GUIDES WP960NG 1000 ft Neon Green Braided Mason Line WP960NO 1000 ft Neon Orange Braided Mason Line The finest most versatile corner pole system available. WP960NP 1000 ft Neon Pink Braided Mason Line Can be effectively used on all types of masonry brick, WP960NY 1000 ft Neon Yellow Braided Mason Line veneer, or solid load-bearing wall and block work. BC607 9' Pole with Outside Corner Fittings BC608 9' Pole with Inside Corner Fittings BC609 9' Pole (Only) LITTLE GIANT CHALK LINE REEL

MEASURING G100 Little Giant Chalk Line RULES Long 100 ft heavy duty cord and pull ring. Hooks easily to a utility belt and holds almost 1 lb of chalk. One-piece steel crank for extra long life. 15 oz capacity.

BL167 Wood Spacing Rule (#636) Lists ten course spacing on one side; inches, eighths, and sixteenths on the other. Made of thick hardwood. GIANT CHALK BL512 Wood Modular Rule (#646L) Lists modular spacing on one side; feet, inches, eighths, and sixteenths LINE REEL on the other. Made of thick hardwood. BL169 Brick Mason’s Rule (#656) G130 Proline® Giant Chalk Line Reel This spacing rule is for oversized brick. Spacings at 2-7/8" and go to Long 130 ft heavy duty cord and pull ring. Holds 1 3-1/2" in 1/16" increments. Made of thick hardwood. GG-320 Engineer Folding Rule lb. Leaves huge bold lines. Often used in parking Red end folding rule is the finest engineer rule made. Graduations: inside lots, on streets, and on concrete, the Giant lines markings in feet, 10ths, and 100ths. Made from hard rock maple. are easy to see.

30 MASONRY PRODUCTS

CHALK BOXES MEASURING KSGB1 TAPES High Speed Chalk Line Box (GB1) 3 x 1 rewind will re-chalk your line quickly. Clutch NR - Nylon-Reinforced Steel Blade lets the you pull the string without knuckle-busting on a Tough, double nylon-coated steel. Break- whirly handle. resistant under severe use in the field. 3/8" wide blade reduces wind drift and tape weight. Metal-reinforced crank handle for KSK1 durability. Standard Chalk Line Reel Compact and light. Self-sealing grommet for spill-free refills. A standard, cost-effective chalk line reel. Model Length Units Zero Pt. Attachment NR18100 100 ft ft, in,1/8 Hook End Hook NR10100H 100 ft ft, 1/10, 1/100 Hook End Hook NR10200H 200 ft ft, 1/10, 1/100 Hook End Hook KSK3X NR18200 200 ft ft, in, 1/8 Hook End Hook 3X Rewind Standard Chalk Line Reel BigMouth® chalk port for easy fill up and protected seal. Flush handle and wedge shape enables easy in and out of tool pouch. 3X rewind with clutch release for fast line pay out and retrieval. Metal rewind arm and tough ABS case. MEASURING TAPES KSK3XPRO SNR - Steel Housing, 3X Rewind Precision Chalk Line Reel Nylon-Reinforced Steel Blade BigMouth® chalk port for easy fill up and protected The world’s best steel long tape in seal. Flush handle and wedge shape enables easy in a housing that’s built to last! The and out of tool pouch. 3X rewind with clutch release strongest housing stainless steel on for fast line pay out and retrieval. Metal rewind arm the market. Tough, double nylon-coated and tough Metal/ABS case. Oversize hook holds true. steel blade assures long life under field abuse. Rubber-grip shovel handle for comfortable, rapid reeling. Metal- reinforced crank handle for durability.

MARKING Model Length Units Zero Pt Attachment CHALK SNR10300 300 ft ft, 1/10, 1/100 Tape End + 1 ft Ring ProChalk & Glo Marking Chalks Ultra-Fine chalk is formulated to achieve a perfect line every time. Brilliant color tones provide strong, sharp lines. From the brightest pigments in the industry, MEASURING Keson produces standard colors plus TAPE their unique, fluorescent “Glo-Orange” for improved visibility. KSNRS18300 300’ Steel Tape KS8B 8 oz Blue KS105B 5 lb Blue with Nylon Coating - Inches KS8GO 8 oz Glo-Orange KS105GO 5 lb Glo-Orange KS8R 8 oz Red KS105R 5 lb Red Chalk Nylon-Reinforced Steel Blade, Speed Rewind. KSPM105 5 lb Black KS105W 5 lb White 3 x 1 rewind, high-visibility housing! Metal, planetary gearing for super-fast rewind.

MEASURING TAPES MEASURING TAPES Standard & Wide Tape Rules KSST181003X Extra wide blade. Magnetic hook. True 100 Ft Steel Tape Measure - Inches zero hook. Positive locking button. 3 to 1 gearing for quick rewinding. High- Chrome plated case. impact resistant case with a full rubber, non- slip grip. Folding steel hook for a great hold on measuring surfaces. Closed housing. KSPG181025UB 25 ft, 10ths with Ultra Bright Blade KSPG1825AL 25 ft with Automatic Lock KSPG1825UB 25 ft with Ultra Bright Tape KSPG25FAR 25' Tape Measure KSPG1825WIDE 25 ft with Wide Tape Features sturdy construction and KSPG1835WIDEV 35 ft with Wide Tape & Ultra Bright Blade rubber grip.

31 MASONRY PRODUCTS

LEVELS TORPEDO LEVEL Type 196 Level Crystal clear vials readable in any direction with no change in accuracy tolerance. Spring steel hairline indicators in vials. Best frame The Stabila Rare Earth Magnetic Torpedo Level is strength-to-weight ratio. Removable rubber built with a heavy duty, 10" die-cast metal frame and end caps for scribing in corners and for reading two acrylic vials (one horizontal, one vertical) that are tight header and sill openings. Vials guaranteed for life. crystal-clear, non-fogging, unbreakable, and monoblock for durability and ease of use.

SH37416 16” Model 196 Level SH37448 48” Model 196 Level SH25100M-WC 10” Die-Cast Torpedo Level with Mag SH37424 24” Model 196 Level SH37472 72” Model 196 Level SH37532 Jamber Set: 78" Model 196 Level with Free 32” Level

Also Available to Order in 22", 36", 59", and 78" Lengths. MASON LEVEL

MAGNETIC LEVELS

Type 96M Magnetic Level Spring steel hairline indicators inside the vials. Certified Level Accuracy in top read position: 1/32" over 72". Removable rubber end caps for flush measuring in Stabila 36448 corners. Patented red pads on end caps grip walls and 48" Mason Level with Dead-Blow Shield flat surfaces. Prevents slipping on walls. Level Designed for those who set brick, block, and stone accuracy guaranteed for life. Vials will never fog, leak, with a trowel. Patented striking shields allow the top of or require adjustment. Readable in every direction with the level to be struck with the butt or blade of a trowel no change in accuracy tolerance. without causing damage to either the level or the trowel. Tough aluminum frame with two patented strikes zones to protect from the repeated hits of a trowel. Large SH38624 24" Model 96M Magnetic Level Strongest magnets, flush hand grips 48" length. Reinforcing ribs on the frame for SH38648 48" Model 96M Magnetic Level mounted, work hands-free. SH38672 72" Model 96M Magnetic Level added strength and grip. Precision-milled measuring surface. The second plumb vial is offset towards the center, making it easy to read in all measuring positions. Shock-absorbing, removable end caps protect the frame SH38532 Jamber Set: 78" Magnetic Level with Free 32” Level against repeated drops and falls. Easy to clean with water and brush. Measures accuracy in normal and Also Available to Order in 16", 32", 36", 59", and 78" Lengths. reverse position will not exceed 1/32in over 72 inches.

DIGITAL PLUMB BOB LEVEL SETTER TJMPZB-400 360° digital measuring. Display PLUMB-RITE™ always reads upright. Select from degrees, % Plumb Bob Setter slope, or audio (beep) alert. Certified vial accuracy. In top Universal plumb read position: (.029°) 1/32" over 72". Digital accuracy tolerance: at bob setter with 0°, 90°= ±.1°, Between 1° & 89° = ±.2°. Patented red pads on endcaps grip walls and commercial grade flat surfaces. Audible tone signals plumb and level condition for eye-free 14 oz bob. Setting installations. Level accuracy guaranteed for life. Vials will never fog, leak, or require pin for wood and drywall surfaces, strong adjustment. magnet for steel frames. Adjustable hook ratchets to cinch onto beams or hook onto SH36524 24" Electronic Level nails or studs. Braided nylon line extends and SH36548 48" Electronic Level holds at lengths up to 14 ½ ft, retracts into case automatically. Also Available to Order in 14", 59", and 78" Lengths.

32 MASONRY PRODUCTS

LEVELS RADIO EAR MUFFS The Crick Level RDN04-AMFMD1C A premium grade AM/FM Digital Tuning Electronic Earmuff with level made in the LCD Display US. Unmatched Preset up to 8 different radio stations per band. Quality. Precision- Use with portable music players or smart phones. built for accuracy and Auxiliary plug included. Fully adjustable durability. Over 50 different machines headband. 25 NRR. are used in production to ensure precision and dependability. The materials used have been selected for their individual reliability.

CRK24010 24” Level with Green Vial EAR MUFFS CRK36010 36” Level with Green Vial CRK42010 42” Level with Green Vial RDN04-TROHVG-BX CRK48010 48” Level with Green Vial Terminator Passive Earmuffs CRK10002 Hanging Hook for Crick Levels Hearing Protection CRK10004 Spring Clip for Crick Levels High visibility passive earmuffs with CRK10006 Replacement Lens for Crick Levels padded moisture wicking headband for comfort. Bright high visibility yellow earcups with soft foam padded earcups. Folds up to quick and easy storage when not in use. 29 NRR. PLATE LEVEL

EAR MUFFS

RDN04-CMT26 Plate Level - Type 106T Radians Cap Mount Designed for the residential stick framer that Earmuff needs fast and accurate wall installations Universal design that will (Plumb Plate to Plate). fit virtually all slotted hard hats. Adjustable headband Fully sealed solid rail (six sided) extension with side wire guides. eliminates deflection, and delivers the Lightweight, durable smoothest extension movement available. construction. 26 NRR. • Top plumb vial is permanently positioned at *Hard hat sold separately. eye level. • Frame side opposite the stand-offs is a level measuring surface and straight edge. • Vials are guaranteed for life never to fog, leak or require adjustment. EAR PLUGS RDN-FP70BG50 SH33610 6' - 10' Plate Level Resealable Bag of 50 Pair SH33712 7' - 12' Plate Level Disposable Earplugs Comfortable, tapered shape. Low pressure, self adjusting foam offers long wearing comfort and quick recovery time. NRR 32. SELF LEVELING KIT KRGG600 SAFETY KITS Self Leveling Kit Includes measuring pitcher, New Hire Safety Kits oval mixing paddle, self-leveling Kit contains Liberty White helmet (ANSI Z89.1), Boas Smoke or Clear eye protection (ANSI Z87), pins, gunite spiked shoes, corded reusable ear plugs, and (1) work gloves. gauge rake, stainless steel For temporary labor, carpenters, and plumbers. smoother/spreader, broom thread handle, and mixing ERB02-18531 4 Piece New Hire Kit with Clear Safety Glasses barrel with locking lid. ERB02-18532 4 Piece New Hire Kit with Smoke Safety Glasses

33 MASONRY PRODUCTS

SCAFFOLDING Common Scaffolding Set-Ups & Accessories SCAFFOLDING WC035600 COMPONENTS WC035400 12" Wheel Well Hoist Standard RENT ME WC032707 WC032554 7' Guard Rail 5' Top Guard Rail WC020500 1-5/16" Coupling Pin WC032000 Guard Rail Post WC032555 5' Mid Guard Rail WC020600 GB510722 Spring Retainer 7' Aluminum Plank WC015606 5' x 6'-7" Walk Thru Frame WC026707 7' Gooser

WC020000 WC024407 Toggle Pin WC033220 7' Cross Brace 20" Side Bracket WC195600 Gravity Lock

WC015500 5' x 5' 1" Single WC030600 18" Adjusting Ladder Frame Screw with Socket

WC030000 Base Plate WCPC2008 8" Caster

WC030518 WC042202 18" Adjusting Screw WC026507 WCBS7 Dual Purpose Right with Base Plate Diagonal Brace 7' Straddle Brace Angle Clamp

END FRAMES

WC015500 WC015606 WC015300 WC012300 WC012500 WC012300 29” Wide x 3’ Tall End Frame - Red WC012500 29” Wide x 5’ Tall End Frame - Red ”W” Red Series Scaffolding WC015300 5’ Wide x 3’ Tall End Frames • 1-5/8" Diameter Tube, Holes at 90°, S Locks WC015500 5’ Wide x 5’ Tall End Frames • Coupling Pins included with Spring Retainers WC015606 5’ Wide x 6’6” Tall Walk-Through End Frame

34 MASONRY PRODUCTS

CROSS BASE PLATES & BRACES SCREW JACKS SJB Cross Braces

WC03000 SJS More Sizes Available!

WC03000 Base Plate 2.0 lbs SJS Screw Jack with Socket 12.0 lbs Straddle Brace SJBJ Screw Jack with Base Plate Jr. 9.5 lbs SJSJ Screw Jack with Socket Jr. 9.5 lbs

Part No Description Weight WC025307 7' x 2' Cross Brace 11.50 lbs WC024407 7' x 4' Cross Brace 12.25 lbs SCAFFOLD WC024410 10' X 4' Cross Brace 16.50 lbs WCBS7 7' x 4' Straddle Brace 15.00 lbs CASTERS

WCPC2008 8" Scaffold Caster GUARD RAILS & GATES

R5 & WC032707 WC032000 SIDE & END BRACKETS

W-EB23 WC033220

WC031000 Guard Rail Gate GRG-CLA WC033220 20" Side Bracket R5 5' Guard Rail WC033224 24" Side Bracket WC032707 7' Guard Rail W-EB20 20" End Bracket WC031000 Guard Rail Gate W-EB23 23" End Bracket GRG-CLA Adjustable Guard Rail Gate WC033221 20"-30" Adjustable Side Bracket WC033221 WC032000 Guard Rail Post WR-GRPC Guard Rail Post Corner Unit WC032000 Guard Rail Post with Toeboard Clip WC03320 20" Side Bracket End Guard W-SBEG23 23' Side Bracket End Guard SCAFFOLD HOIST SA SYSTEM

GOOSERS Hoist standard with swing arm 250 lb WW load capacity. Heavy-duty professional quality for years of use. HS

G3 3' Gooser 6.0 lbs G5 5' Gooser 9.5 lbs WC035600 Well Wheel WC026707 7' Gooser 12.0 lbs WC035400 Hoist Standard G10 10' Gooser 19.0 lbs SA Swing Arm G10H 10' Gooser (Heavy Duty) 20.0 lbs G75 7' X 5' Gooser 13.0 lbs HSSA  Hoist Standard G105 10 X 5 Gooser 20.0 lbs with Swing Arm G105H 10' X 5' Gooser (Heavy Duty) 21.0 lbs

35 MASONRY PRODUCTS

ALUMINUM PLANKS & SCAFFOLDING TIES RAIL SYSTEMS ER7005 5" Scaffold Tie ER7009 9" Scaffold Tie

1000 Per Box

These scaffold planks offer a 500 lb duty rating and allow for 2 people on one plank.

The TWIST-PROOF® stage design is ideal for ladder jack applications, swing stages, or catwalks. Individual slip-resistant HOOP CANOPY decking minimizes paint or material build-up.

Vinyl-coated end caps serve as hand grips and protect from sharp edges and surface marks. Easily forms a protective work area with your existing scaffolding. Place on top of scaffold frame with poly sheeting for a dry comfortable jobsite. WER04-2316 12” X 16’ Aluminum Plank 2-Person 500 lbs WER04-2320 12” X 20’ Aluminum Plank 2-Person 500 lbs WC039218 Hoop WER04-2324 12” X 24’ Aluminum Plank 2-Person 500 lbs WC039219 Telescoping Leg WER04-2516 20” X 16’ Aluminum Plank 2-Person 500 lbs for Hoop Canopy WER04-2520 20” X 20’ Aluminum Plank 2-Person 500 lbs

Stanchion Post Assembly Square Guard Rail Guard Rail System Gives versatility to design STAIRWAYS & a 1, 2, or 3-sided guardrail S764E system. Select from end ACCESSORIES rail/toe board assemblies, stanchion posts, square Toe Board guard rails, and toe boards in

End Rail and End Toe Board Assembly* 9' and 13' foot cut lengths. *Each Kit includes 2 end rails, 1 toe board SU764I

STR5 ALUMINUM SCAFFOLD BOARD SU64C 7' x 6' 4" Stairway without Hand Rails S764 7' x 6' 6" Stairway with Hand Rails SU764I Interior Hand Rail SU764E Exterior Hand Rail STR5 Starter Bar

Heavy gauge heat-treated structural aluminum alloy. Hooks accommodate 1.66" and 2" O.D. pipe. Meets or exceeds OSHA requirements. Weight rating: 75 lbs per foot. WIND CLIPS GB510722 7’ x 19-1/4 Aluminum Plank Wind Clips Work on any poly enclosure material. Full sized, 11" plastic wind clips placed three feet apart will reduce labor with their easy LAMINATED snap on design, hold poly securely to the scaffolding, reduce noise PLANKS caused by flapping poly, and fit most commercial scaffolding.

WC1016 16 Ft Laminated Plank WD1000 100 pc box of Wind Clips

36 MASONRY PRODUCTS

MOBILE LADDERS SCAFFOLDING

WCAP1 6 ft All Purpose Scaffold Werner NXT1A Series Stepladders All-purpose unit. Designed for professional Adjustable speed contractors and industrial users. scaffolding. Work With a duty rating of 300 lbs, this platform adjusts 24'' series features HolsterTop®s with to 48''. Platform height the Lock-In System to secure tools adjustable end-to-end to from falling while keeping them create level work platform right at hand. on stairs. Patented safety system. 1000 lb capacity. WER01-6204 4 ft Fiberglass Stepladder Type 1A WER01-6205 5 ft Fiberglass Stepladder Type 1A WER01-6206 6 ft Fiberglass Stepladder Type 1A WER01-6207 7 ft Fiberglass Stepladder Type 1A WER01-6208 8 ft Fiberglass Stepladder Type 1A WER01-6210 10 ft Fiberglass Stepladder Type 1A LADDERS WER01-6212 12 ft Fiberglass Stepladder Type 1A

Werner Podium Ladder Many More Ladder Styles Ideal for working at fixed heights and & Sizes in Stock! easier to maneuver than scaffolds or lifts. This ladder features full aluminum bracing and a full set of rear Werner Fiberglass Extension Ladders horizontals. The LOCKTOP™ extended Have non-conductive rails making these ladders guardrail provides an extra point of ideal for working near electricity. With a duty contact and conveniently organizes rating of 300 lbs, this series is durable and long tools and accessories. The newly lasting. The exclusive ALFLO® rung joint means designed EDGE360™ gives the bottom TWIST-PROOF® performance on the job. of the ladder protection from every angle with integrated rail shield, edge bracing, and over-sized foot pads. WER03-D6216-2 16 ft Fiberglass Extension Ladder Type 1A WER03-D6220-2 20 ft Fiberglass Extension Ladder Type 1A WER03-D6224-2 24 ft Fiberglass Extension Ladder Type 1A WER03-D6228-2 28 ft Fiberglass Extension Ladder Type 1A WER08-PD6203 3 ft Fiberglass Podium Ladder Type 1A 300 lbs WER03-D6232-2 32 ft Fiberglass Extension Ladder Type 1A WER08-PD6204 4 ft Fiberglass Podium Ladder Type 1A 300 lbs WER03-D6240-2 40 ft Fiberglass Extension Ladder Type 1A WER08-PD6206 6 ft Fiberglass Podium Ladder Type 1A 300 lbs

Werner "LEANSAFE" Step Ladder REBAR CAPS LEANSAFE™ ladders have a lower rear DU1000 Rebar Caps rail to front rail connection point allowing Fits 3/8" to 1-1/4" Rebar. Reusable, Heavy duty the user to get closer to the work when in polyethylene is virtually indestructible. Impervious to stepladder mode. Leaning a ladder safely weather and temperature extremes. Brightly colored for requires that the rear rail is latched to the good visibility. front rail. Werner’s patent pending single latch design stays engaged when needed and is centrally located to easily open and close. IMPALEMENT PROTECTION DS0220339 Impalement Rebar Cap Our Patented Suprotek PC-110 Meets Federal OSHA WER01-L6206 6 ft "LEANSAFE" Fiberglass Step Ladder specification #1926.701(b). Contains a curved steel WER01-L6208 8 ft "LEANSAFE" Fiberglass Step Ladder plate to provide additional protection against falls that occur from an angle.

37 MASONRY PRODUCTS

PORTABLE FORCED AIR HEATING SYSTEM HEATERS

Additional Models Available! Tradesman Forced Air LP Heaters Features a unique 3-trial ignition system, the industry's heaviest gauge combustion chamber and burner plate, and Self Diagnostic Service Saver models for convenient trouble-shooting. Designed to LBW-FOREMAN 500 DF withstand the harsh environments. Foreman Indirect-Fired Heater 500,000 BTUH Ideal for providing dry, clean heat into insulated spaces, work areas, LBW-TRADESMAN #125 125,000 BTU LP Gas Heater with Regulator heating docks, or anywhere 100% clean air is needed. L.B. White's LBW-TRADESMAN #170 170,000 BTU LP Gas Heater with Regulator ductable Foreman heater features a fuel-saving high efficiency heat LBW-TRADESMAN #400 400,000 BTU LP Gas Heater with Regulator exchanger, quiet operation, and high CFM.

PORTABLE PORTABLE KEROSENE KEROSENE HEATER HEATER

DEWDXH190HD 190,000 BTU/HR Forced Air Kerosene Additional Models Construction Heater Available! Burns at 190,000 BTU/HR and can be used with kerosene diesel, fuel oil, or JP-8 fuels. With an included wheel kit, protective roll LBW-TRADESMAN #K175 cage and an 14 gallon tank, K175 Kerosene Heater 175,000 BTU with Thermostat you will get a full 10 hours of For those times when gas may not be available, L.B. White run time and the ability to heat Tradesman K kerosene heaters offer the ultimate in efficient, up to approximately 4750 sq portable construction heat. ft of space. Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temperature. DUCTABLE UNIT HEATER

L.B. White’s Premier series of ductable direct-fired heaters are perfect for small, hard to reach areas, as well as large PORTABLE PROPANE construction applications that HEATERS require directed heat. Delivers DEWDXH70CFAV 68,000 BTU Cordless clean, worry-free heat or air Forced Air Propane Heater circulation where you need it. Operates with 50% less noise than standard units of similar size. Includes a 20' hose and regulator and is manufactured with a large ergonomic handle and a WH170 170,000 BTU Premier Heater split barrel design for easy maintenance. WH26346 12” x 12’ Gray Duct For 170,000 BTU Heater WHTS350DF 350,000 BTU Premier Heater LP / Natural WH22835 18” Duct for 350 DF Premier Heater DEWDXH12B 12,000 BTU Portable Radiant Propane Heater Heavy duty design built for the jobsite. Features high speed fan, LED work light, USB charging ports, factory installed ODS, and a thermoelectric CONVECTION HEATER safety valve so you can feel comfortable using this certified indoor safe heater anywhere. No Electricity Required! DEWDXH45LP 45,000 BTU Portable Radiant WH341 Norseman 250 LP Gas Salamander Heater Propane Heater with Regulator Equipped with top of the line roll cage style construction Ideal for new construction sites or situations where to make it one of the most durable heaters available. electrical power is not readily available, L.B. White With high density polyurethane wheels, never have to convection heaters offer easy to use, highly worry about flat tires. Includes a 20' hose and regulator efficient heat with no electricity needed. assembly. Heats approximately 1125 sq ft of space.

38 MASONRY PRODUCTS

TORCHES VOLCANO ROD LBW-TORCHMAN 500 HEALL16JX2B Torchman 500,000 BTU Electric Sand Pile Heater Perfect for burning brush, thawing pipes, Heats all day while you work, three melting ice, and other heating uses. It boasts solid steel construction but is ways: heat from the ground below the also conveniently lightweight. Easy to use, with a throttle valve to adjust the sand pile moves up through the sand, heat output and 100% test fired. radiates from the water barrel in the center of sand pile, heat lost through the top forms LBW-5N6 Cast Iron Torch 500,000 BTU with a heated air shield between the whole top Regulator surface of the sand and the tarp. Measures Ideal for brush burning, thawing pipes, roofing 16" x 38" x 1" and weighing less than 5 lbs. applications, and more. Includes a Regulator.

THERMOSTAT WH00831 HEATING SYSTEM In-Line Electric Thermostat THAWZALL™ HEAT MACHINE An economical way to thaw frozen RENT ground and keep your crews ME ELECTRIC working year round. Efficient oil- fired boiler heats transfer fluid Generator Not Included BARREL which is pumped through hydronic HEATERS hoses. Completely portable. Heat only the areas you want. Great The Powerblanket® Drum Warmer source of safe & quiet heat at the Protects product by maintaining desired construction site. temperature through an evenly heated area, • Emergency heating system reducing downtime. Keeps chemicals and other industrial materials within customer-defined • Can connect directly into down boiler heating system. temperature ranges, meaning no overheating and burning of product. • Thaws up to 12 inches of frost per 24 hour period. POWBH55-PRO 55 Gal Drum Blanket with Adjustable Temp • Safe. No open flame. POWBH55-RR 55 Gal Drum Blanket

ELECTRIC TOTE BARRICADE TAPE HEATERS Non-pressure sensitive vinyl barricade ribbon. High visibility 3" wide. Variety of stock and special order legends available. Rolls are 3" x 1000' Available in Heavy Duty 4 mil or Standard 2 mil. RI1000 "Caution" Tape 4 mil RI1002 "Caution" Tape Standard Grade 2 mil RI2000 "Keep Out" Tape 4 mil POWTH275 Tote Heater RI3000 "Danger" Tape 4 mil With patented GreenHeat™ RI4000 "Caution Wet Concrete" Tape 4 mil technology, saves products by keeping it within safe temperature ranges. The flexible weather resistant tote heaters fit 275 gallon IBC Farrell Equipment & Supply Co., Inc. - Trade Customs totes and include an adjustable thermostatic controller. The compilation and checking of a general catalog of supplies and machinery is complicated, involving many thousands of product numbers, dimensions, etc. and absolute perfection is not a commercial possibility. Every endeavor has been made to have the latest lists, dimensions, descriptions and designs throughout this catalog, but we do not guarantee accuracy. If any errors or misprints have escaped our checkers and printers, we are not responsible for them, and they are subject to our correction. All information contained in this catalog, pertaining to strengths and ELECTRIC CYLINDER proper working loads of material, tools or machines is derived from information compiled by the manufacturers for the convenience of the buyer. We assume no responsibility for the accuracy of HEATERS this information. Manufacturers are constantly changing designs, specifications and accessories on many items and these are subject to change without notice. Illustrations are subject to modification. POWGCW100 Gas Cylinder Warmer All references in this catalog are for description only and are not representations or warranties of With patented GreenHeat™ technology, saves any kind or nature. money by optimizing the gas temperature and Copyright © 2018 by Farrell Equipment & Supply, Inc. increasing the vaporization rate. Printed in U.S.A. 0-060618

39 Other Available Farrell Catalogs

Blade & Fastener Catalog Concrete Catalog Decorative Concrete Catalog Decorative Stamp Catalog Erosion Control Catalog Jobsite Catalog

Measuring & Marking Catalog Rental Catalog Road & Highway Catalog Safety Catalog Winter Jobsite Catalog Woodworking Catalog

Sign Up for Farrell Emails Want first access to exclusive sales, product show news, free giveaways, new products, and more? Sign up for official Farrell email alerts today. Scan the QR Code or Visit bit.ly/farrelleq

EQUIPMENT & SUPPLY CO., INC.

Visit us at one of our Seven Locations in Wisconsin or Minnesota or shop online at farrellequipment.com

For your convenience, we accept:

Copyright © 2018 by Farrell Equipment & Supply Co., Inc.