V VERTICAL MACHINING CENTERS
Haas Automation Inc. C onstant improvement is a way of life at Haas Automation. We’re always looking for ways to improve our CNC products and give you – our customers – more value. Normally, we roll these incremental improvements into production without fanfare – you simply get a better machine. For our new-generation vertical machining centers, however, we redesigned the entire product line to incorporate a wide range of enhancements that make Haas VMCs better than ever before. Our engineers reviewed all aspects of the machines – including motion control, coolant containment, chip evacuation, ergonomics, and serviceability – then made improvements, and put everything into an all-new package. In this brochure you’ll find all the latest technological advancements, new machine sizes, and capabilities that Haas Automation has developed through constant research and ongoing product refinement.
Contents The Haas control 4-13 Rigid foundation 14-15 Motion control 16-17 Spindle & spindle drive 18-21 Toolchangers 22-23 Chip removal & coolant systems 24-27 Operator convenience 28-29 Model variations 30 Machine configurations 31 Performance enhancements 32-35 Rotary tables & indexers 38-39 Dimensions & specifications 41-45
Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 1 OSE-BUILT FACTORY, 010HIP IN THE IND INDUSTRYUSTRY.
Our customer-first focus: s &AST SERVICE PROMISE Every local HFO fields fully stocked service vans and provides a “right-now” response. s 0UBLISHED PRICING POLICY The published price is what you pay. We’re still the only CNC builder to make this promise. s &AIR SPARES PRICING We’re not interested in gouging a customer in need. Your loyalty is more important. s /N TIME DELIVERY We build the entire machine and control in-house utilizing the most advanced shop floor ERP (enterprise resource planning) system in the world. s 'REAT RESALE VALUE Year after year, Haas machines bring the highest documented There’s no finger-pointing around here. resale value in the industry.
2 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 3 TAKE CONTROL
4HE (AAS #.# #ONTROL The command center of your Haas machine tool. Years of development have gone into designing the best control hardware and software in the industry. Our new-generation VMCs pack even more innovation into what was already the industry’s greatest overall CNC control. To ensure smooth, precise motion control, Haas VMCs use next- generation digital servomotors and high-resolution encoders on all axes. Combined with significant software and motor-control advancements, these yield better surface-finish performance than ever before.
-AIN &EATURES
#LOSED 3YSTEM Our focus is to provide a robust, dependable control that is seamlessly integrated with the machine. Our closed system is optimized specifically for Haas machines, and does not rely on third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine.
$EDICATED +EYPAD The Haas keypad has a full array of keys, including a complete alphanumeric keypad, and all common functions are clearly labeled for operator ease. If you’ve ever fumbled with hot keys, or had to page through screens looking for a specific function, you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and most functions can be performed with the push of a single button.
/NE "UTTON &EATURES Common multi-step functions, such as powering-up the machine or setting tool offsets, have been reduced to the push of a single button. Other often-used functions, such as setting work offsets, homing the machine, and selecting the next tool during set up, are also one-button commands.
-ULTI &UNCTION *OG (ANDLE Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.
#OLOR ,#$ 3CREEN Our full-color, 15" TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare, tempered glass for protection and easy viewing.
!DVANCED 0ROGRAM %DITING A unique feature of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format.
53" 0ORT The built-in USB port allows the use of customer-supplied USB flash memory devices or external hard drives.
4 | America’s Leading Machine Tool Builder RETHINKING THE OBVIOUS
4HREE SCREEN SIMPLICITY From the very beginning, the Haas control was designed to be the industry’s most user- friendly CNC available. Reliability and longevity have been its reputation, for sure. But the main thing you hear Haas owners tell other machinists is that a Haas is the easiest-to- operate CNC machine tool they have ever seen. It’s what a Haas control is all about. The Haas control’s three-screen system gives users access to every control feature needed in each mode without having to leave the current display screen. Here are some examples of how the screens look and function.
4HE %DIT 3CREEN After setting your offsets in the Setup 4HE /PERATION 3CREEN On the Operation screen, you’ll screen, you’ll probably need to load a program. find all the information needed to run the machine – organized and available for easy access. Here’s a quick look: In the upper-left corner is the Program Pressing the List Programs button on the keypad brings up the Edit screen, Display box. When executing programs containing sub-programs, both the where you can access programs from any of the devices attached to the main and the sub-program will be displayed in a split-screen box. 4HE 3ETUP 3CREEN machine (i.e., internal memory, USB stick, Ethernet, etc.). Just to the right are the Active G-Codes, with text descriptions, the Coolant A powerful feature in the Edit screen is the Quick-Key help menu, which Above is the Setup screen. It’s simple: This is where you do all your machine setups. Let’s take a look Level Indicator, and the Active Tool information, including a graphic image of offers a complete list and description of all functions, including List at the information on the screen: the tool type, as specified on the Tool Offset page. Programs and file navigation. In the Quick-Key help menu, you’ll see the The Active Program box is displayed in the upper left. The Tool Offsets are displayed in the upper command name and the associated key for each function, along with a full In the center of the screen is the Offset Window. Here, you can make right. Below the tool offsets are the Work Zero Offsets. Below left, is the Spindle Information box description of how to perform each function. There are extensive Quick-Key adjustments to any offset while the machine is running. You don’t have to displaying spindle speed, plus any override values for spindle speed, feedrate, and rapid rate. Next to help menus available from all three screens of the control interface. exit the Operation screen to change an offset. that is the Position box, showing operator, work offset, machine, and distance-to-go coordinates. To the right of the position box is the Tool Management information. In the lower-left corner of the Edit screen is the Editor Help box, which Along the bottom on the left, note the Spindle Information box, with the displays a description for each available topic. At the bottom-right side override displays. In the center is the Position display box, and to the right Simple, clean, and easy to understand. Notice that the tool offset box (upper right) is white and the of the edit screen is a viewable Clipboard. Whenever you cut or copy a are the Timers and Counters. other boxes are colored. This indicates the box is active, and the cursor can be moved within the box selection, it will be displayed in the Clipboard box. by pressing the keypad arrow keys. Experienced machinists will really like the Remaining timer, which uses Within the Edit screen are numerous other functions that relate to program information from the Last Cycle timer to display the time remaining in editing, like Program Simulate (now with control over the draw speed), a program. This lets the operator know how much time is remaining in a secondary program display window for alternate programs, the MDI the cycle, allowing better time-management decisions when leaving the function, and Visual Quick Code capabilities. machine unattended.
6 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 7 THE HIDDEN POWER IN THE HAAS CONTROL
2EMOTE *OG (ANDLE The patented Haas color remote jog handle features a 2.8" color graphic display, an 11-button keypad, a triple-knob motion-control system, and a built-in LED inspection light. You can set tool and work offsets, jog up to 9 axes, display machine position, show the current program running, and much more – all from the jog handle.
#52.4#/-$3 The Current Commands page displays the current running status of the machine, including the current program running, the current position, which tool is in the spindle, the spindle and axis loads, the current spindle speed, and the feedrate. Additional screens show which commands and G-codes are being used in the current program; and a timer shows cycle time, cutting time, power-on time, and M30 count (number of parts). Other displays show which macro variables are being used, provide tool-life information, and show the minimum and maximum spindle load for each tool.
(%,0#!,# The Help function is a built-in, searchable operator’s manual that explains the various functions of a Haas machine. Simply type in a keyword to find a specific topic, or hit F1 for G-code help and F2 for M-code help. The Calculator pages are another powerful tool. There are calculators for solving triangle equations, circle-circle-tangent equations, and circle-line-tangent equations, as well as a speeds-and-feeds calculator. Also included are a standard math calculator, a drill- and-tap chart, and a decimal-equivalent chart. These calculators simplify machining operations and speed math calculations, and the solution to any equation can be pasted into a program directly from the calculators.
4HE 0OWER OF A 3INGLE "UTTON Some of the most powerful features of the Haas control – features every machinist will appreciate – take only the push of a single button. For example, you can set tool offsets with the push of a single button – without having to manually enter numbers into the control. Simply jog a tool to the surface of the part, push the Tool Offset Measure button, and the tool’s length is automatically stored in the tool length register. Push the Next Tool button to repeat the process for each tool. That’s it! Setting work offsets is just as easy. These time-consuming processes have been reduced to a few simple steps.
4OOL ,OAD -ONITORING Maximizing tool life is another key to increasing productivity. The Haas control can monitor the spindle load for each tool, and automatically adjust the feeds if the load exceeds a limit set by the operator. If a tool exceeds the preset limit, the control can be set to reduce the commanded feedrate, alert the operator, go into feed-hold mode, or generate a tool-overload alarm. The first time a program runs, the Haas control automatically records the highest load seen for each tool. Using this information and the Tool Load Monitoring feature of the control, the operator can set load limits for each tool. This maximizes tool life, and protects the workpiece and machine from the effects of tool wear.
!DVANCED 4OOL -ANAGEMENT To maximize productivity, the Haas control has an integrated Advanced Tool Manager that allows you to create a group of redundant tools for use within a program. From a single screen, you can view the different tool groups and their parameters. Simply define which tool numbers are part of a group, and what parameter will determine when to change to a redundant tool. This can be based on feed time, the number of tool calls, the number of holes drilled or tapped, or a preset load limit. To use a group of redundant tools in a program, simply enter the group number as your tool call-out. The tool offsets you defined during set up are automatically loaded for each tool as it’s called up.
8 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 9 UPGRADES: options
)NTUITIVE 0ROGRAMMING 3YSTEM With the Haas Intuitive Programming System, it’s no $8& &ILE )MPORT The *.dxf import capability of the Haas Intuitive Programming System allows a longer necessary for a machine operator to know G-code to perform basic milling operations. programmer to easily import a *.dxf file into the Haas control, select features on the file – holes, threading, pockets, The Haas Intuitive Programming System is a proprietary conversational operating system that uses an easy-to- islands, or contours – and generate the toolpath. The program output is standard G-code – easy to understand understand tabbed format with full-color graphics to guide the operator through the steps necessary to machine a and edit. By taking advantage of the editing functions of the Haas control, the user can modify features, change the part. First, the control leads the operator through basic job setup: setting tool and work offsets, selecting the tool type, order of operations, or even conveniently put them into other programs – all at the control, without going back to a and specifying the material being cut. The operator then selects an operation to perform and fills in basic information computer to repost a CAM-generated program. as prompted. Default values for spindle speed, depth of cut, and feedrate are filled in automatically, based on the The Haas control provides the best of both G-code and conversational-style systems. It doesn’t force the user into information provided. The operator can change these conservative values if desired. one method of operation. The Haas control weaves them into a simple, coherent control system: Use manual or Once all necessary information is entered, pushing Cycle Start performs the desired operation. Multiple CAM-generated G-code, or use the Intuitive Programming System, or mix them. Use the programming strategy that operations can be recorded and saved as a single G-code program that can be played back to duplicate the part. is best for the part; the Haas control accepts them all. This program can be transferred to any other Haas VMC and run without editing. Help menus are available directly on screen, and a graphic dry-run feature allows operators to check their work before running a part. Use the top tab menu to select the type of operation 1 to perform.
3 2. Further define your specific cutting operation by choosing from the lower set of tabs.
3. Fill in the information when prompted by the control and press Cycle Start.
Using plain language, simple 2 graphics, and easy-to-follow steps, the Haas Intuitive Programming System guides the operator through the steps necessary to machine a part.
TH AND TH !XIS #ONTROL Allows the use of 4th- and 5th-axis rotary tables 5SER $ElNABLE -ACROS Create subroutines for custom canned cycles, probing for multi-side machining or machining complex contours and shapes, such as impellers. Increases routines, operator prompting, math equations or functions, and family-of-parts machining with variables. productivity and reduces setups. %NGRAVING Using a single block of code, you can easily engrave any text string enclosed in #OORDINATE 2OTATION3CALING Use rotation in conjunction with work offset parentheses. Engrave sequential part numbers using the standard serializing function. probing to speed workpiece set up, or use it to rotate a pattern to another location or around a circumference, etc. Use scaling to reduce or enlarge a toolpath or pattern. - &UNCTIONS Adds 8 additional M functions for a total of up to 13 user interfaces. Use these to activate probes, auxiliary pumps, clamping devices, part loaders, etc. 3ECOND (OME 0OSITION Allows the operator to quickly send the axes to a user- defined Home position other than the machine’s default Home position. -EMORY ,OCK +EYSWITCH Locks memory to prevent program editing by unauthorized personnel. Can also be used to lock settings, parameters, offsets, and macro variables. %THERNET )NTERFACE Transfer data between your Haas and a network or PC with the Ethernet interface. Transfer program files easily to and from the machine, and access large files -EMORY 5PGRADES Expandable on-board solid-state memory allows storing, running, with multiple machines. High-speed data transfers allow DNC of large files at up to 1000 blocks per and editing large programs directly at the machine. second. Easily set up from the control screen.
10 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 11 Control Features Control Specifications
■ User-friendly General Microprocessor Triple high-speed 32-bit ■ Advanced program editor Program execution speed 1000 blocks/sec standard ■ Brushless AC servo drives Axis control 3 axes linear, 4th and 5th axes optional Interpolation G01, G02, G03, helical ■ Up to 1200 ipm cutting feedrates Min. input increment – inch mode 0.0001" – metric mode 0.001 mm ■ Triple 32-bit processors Min. output resolution 0.0000072" (0.00018 mm) ■ Executes up to 1000 blocks/second Feed Functions ■ ISO standard G-code compatibility Rapid Traverse Override 5%, 25%, 50%, 100% Feedrate Override 0% to 999% in 1% increments ■ Haas one-button power-up Jog Handle Resolution – inch mode 0.0001"/0.001"/0.01"/0.1" per handle division ■ Haas one-button tool offset entry – metric mode 0.001/0.01/0.1/1.0 mm per handle division Jog Feeds – inch mode 0.1/1.0/10.0/100.0 ipm ■ 200 tool offsets – metric mode 1.0/10/100/1000 mm/min. ■ 105 work coordinates Zero Return One key (G28)
■ Tool load monitoring Spindle Functions Speed Command S = 1 to max spindle rpm ■ Tool life management Override 0% to 999% in 1% increments ■ Helical interpolation Tool Functions ■ Background editing Length Compensation 200 sets, geometry & wear Diameter/Radius Compensation 200 sets, geometry & wear ■ Split-screen program review Length Measurement Automatic length storage ■ Trig calculator Life Management 200 sets w/alarms Selection Txx command ■ Arc & tangent calculators Programming ■ Speeds and feeds calculator Compatibility ISO standard G code ■ Run/stop/jog/continue Positioning Absolute (G90), incremental (G91) Canned Cycles 22 functions standard ■ (3- "%.%&)43 RS-232 / DNC / USB / optional Ethernet Circular Pocket Milling G12, G13 ■ Mid-program restart Bolt-Hole Drilling G70, G71, G72 s 'REATLY REDUCES Advanced Pocket Milling G150 ■ CYCLE TIMES Inch or metric programming Inch/Metric Switchable ()'( 30%%$ -!#().).' The High-Speed Machining option is a powerful tool s &ULL LOOK AHEAD ■ Message page Work Coordinates 105 sets to reduce cycle times and improve accuracy. Testing on complex 3- to 5-axis applications shows Part Zero Set Automatic storage ■ drastic reductions in cycle times, as well as increased accuracy and smoother motion. s 5P TO IPM 15 selectable languages M Code Outputs 5 spare † CONTOURING 2D Cutter Diameter Compensation G40, G41, G42 ■ More than 200 user-definable settings Using a motion algorithm called “acceleration before interpolation,” combined with full look-ahead, the 2D Cutter Length Compensation G43, G44, G49 s !CCELERATION BEFORE HSM option allows contouring feedrates up to 1200 ipm without risk of distortion to the programmed ■ Self-diagnostics 3D+ Cutter Diameter Compensation G141 INTERPOLATION 5-Axis Tool Length Compensation G143 path. All programmed motions are accelerated before interpolation to ensure the movement of each ■ Fully descriptive alarms s )3/ STANDARD ' CODE axis does not exceed the acceleration capability of the machine. The look-ahead algorithm determines Data Input/Output ■ Programmable mirror-imaging the fastest feedrate at which each stroke can be blended into the next without stopping. This PROGRAMMING Communications Port RS-232, USB, optional 100Base-T Ethernet results in higher accuracy, smoother motion, and a higher actual feedrate – even with complex ■ s (IGHER ACCURACY Advanced pocket milling Data Rate To 115,200 baud ‡ part geometry. The Haas HSM option accepts ISO standard G-code from all major CAM systems, and ■ is only a fraction of the cost of other high-speed controls. s 3MOOTHER MOTION Bolt-hole drilling Memory Capacity Standard 1 MB; up to 250 MB optional ■ Graphic dry run Number of Programs 500 ■ 5 spare M functions
■ Contour accuracy control
■ Text engraving
■ Made in the USA
† May be used by options. ‡ With 6' or shorter cable.
12 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 13 THE FOUNDATION FOR SUCCESS
! 2IGID 0LATFORM No matter what the project – a family house, a skyscraper, or a suspension bridge – the soundness of the structure is determined by the sturdiness of the foundation. The same principle applies to vertical machining centers. It all starts with the base and column structures. How well the machine cuts is tied to the sturdiness of the basic structure.
-ASSIVE #AST )RON #ONSTRUCTION Cast iron provides up to ten times the damping capacity of steel. That’s why Haas uses cast iron for all major components. Our castings are reinforced with heavy ribs to resist flex and damp vibrations, and inspected thoroughly before and after machining to ensure they are free of flaws.
4RIANGULATED 7IDE 3TANCE #ASTINGS Our triangulated wide-stance castings allow maximum structural loading with efficient use of materials. They provide a rigid and stable machining platform that resists flex, distributes cutting forces effectively, and is very thermally stable.
All structural components are optimized using finite element analysis (FEA) to produce the most rigid designs.
!NTI &LEX 2EINFORCED "ASE #OLUMN #ASTINGS Our specially designed base and column castings feature anti-flex, vibration-absorbing ribs that transfer vibration away from the cutting area. The columns feature an internal torque-tube design that yields superior rigidity and provides the most anti-flex properties of any design.
14 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 15 MOTION CONTROL
!UTOMATIC ,UBRICATION The Haas automatic 2ECIRCULATING "ALL 'UIDEWAYS Haas uses recirculating ball guide- lubrication system meters and distributes lube to guideways ways for each axis of every VMC. These guideways are preloaded for zero clearance, and $OUBLE !NCHORED "ALLSCREWS Haas uses only premium-quality ballscrews and guides from the and ballscrews as the machine operates. This ensures that all provide full load-carrying capacity in all directions. They consume less power, do not require world’s top manufacturers. Although more expensive, their premium quality is the only way to achieve the high accuracy and critical components are properly lubricated at all times, saving adjustment, and are proven to outperform sliding box ways for accuracy and speed. Each long life that our customers demand. Ballscrews are anchored at both ends and inspected for 100% parallelism to the axis time and reducing maintenance costs. Our system uses the guideway is automatically lubricated to guarantee long life. guides. Preloaded ball nuts eliminate backlash. minimal amount of lubrication necessary, eliminating waste oil and lessening environmental impact. 2ECIRCULATING "ALL 'UIDEWAYS "RUSHLESS 3ERVOMOTORS Haas uses state-of-the-art, energy-efficient brushless servomotors that offer more torque in a smaller frame than almost any other motors available. These high-performance servos provide more power ,INEAR 3CALES Linear scales ensure positioning /UTPERFORM "OX 7AYS Recirculating ball guideways are preloaded to for heavy cuts, and higher acceleration/deceleration rates to reduce cycle times. High-resolution encoders and closed-loop accuracy along X, Y, and Z axes by compensating for the provide zero clearance between the moving surfaces. This increases rigidity and stiffness in digital feedback ensure ultra-precise positioning. thermal variations inherent in all machine tools. With a all directions, while providing higher accuracy and reliability. They have a very low coefficient 1-micron resolution, these scales deliver the extreme accuracy of friction, which allows faster movements without sacrificing repeatability or positioning required for mold making and other high-precision machining accuracy. Box ways require clearance between the moving surfaces in order to operate. $IRECT #OUPLED 3ERVOMOTORS Our servomotors are coupled directly to the ballscrews with steel disc applications. They have a high coefficient of friction, which produces stick-slip effects that can lead to couplings to eliminate windup, even under severe loading. This greatly improves positioning accuracy, and provides more accurate machine errors. threading and contouring. And they don’t wear out or lose accuracy over time.
%LECTRONIC 4HERMAL Recirculating Ball Guideway Box Way "ALLBAR 4ESTED Haas uses a state-of-the-art ballbar test to check the linear accuracy and geometry #OMPENSATION 3YSTEM Ballscrews of every machine. Accurate to ±0.5 micron (±0.0000197"), with a 0.1-micron (0.00000394") resolution, the ultra-precise generate heat when they rotate, which can cause them to ballbar tracks movement as the machine is put through a series of circular moves to certify synchronous movement and verify expand. With high duty cycles, ballscrew growth can lead machine squareness. This generates a chart illustrating machine accuracy. Any deviations in squareness or accuracy show up to cutting errors. Our electronic thermal-compensation as distorted circles that are very easy to spot. A copy of this chart ships with each Haas VMC as assurance that the machine is (ETC) algorithm accurately models this heating effect and accurate and properly aligned. compensates for screw position. Zero Clearance Required Clearance
16 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 17 MAIN SPINDLE FEATURES
(IGH #APACITY #ARTRIDGE 3PINDLE The advanced design of our spindles provides high axial-thrust capability, yet generates minimal heat. The front and rear bores of the housing and the OD of the spindle are finished in one operation. This guarantees perfect alignment between the bores and ODs, thus reducing bearing heat. Our spindles use pre-loaded angular-contact bearings throughout, with the two forward bearings separated by a large spacer to enhance radial stability – enabling heavy cuts in steel. To ensure long life, the spindle is pressurized with air to prevent coolant contamination, and an air/oil mixture is injected automatically to ensure precise lubrication and long bearing life.
0OWERFUL 6ECTOR 3PINDLE $RIVES The Haas-designed vector spindle drive uses closed-loop, digital servo technology to provide precise speed control and peak performance under heavy cutting loads. The system optimizes the slip angle between the rotor and stator of the spindle motor to greatly increase low-speed torque and accelerations, resulting in the fastest, most powerful spindle ever. These drives allow you to push the spindle to 150 percent of the motor’s continuous power rating for 15 minutes, and to 200 percent for 5 minutes. That’s more performance headroom than other spindle drives on the market. 3PINDLE #ONlGURATIONS /N 4HE &LY 7YE $ELTA 3WITCHING Many Haas VMCs feature Model TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 VM VR VS GR MDC a dual-winding motor – wye and delta – with an electronic switch to change between the 40 TAPER s s s s s s s s s s s s s s s s s s two windings. Selecting the best winding for low-rpm cutting and the best winding for high- 50 TAPER s s s s s s s s s s rpm cutting yields higher torque over a wider rpm range. On-the-fly switching maximizes 2-SPEED GEARBOX s s s s s s s s s s s s s acceleration/deceleration rates for more chip making and less waiting. s4,000 / 5,000 RPM * (4K) (5K) s s6,000 RPM* † s 7,500 RPM s s s s s s s s s s s s s s s 10,000 RPM s s s s s s s s s s s s s s s s s
HIGH-10,000 RPM* s s s s s s s s s s s s TORQUE 12,000 RPM* s s s s s s s s s s s s s s s s s s s s s 15,000 RPM* PEAK POWER s s s s 30,000 RPM* RPM *Not available on 50-taper machines. Gearbox standard w/50-taper spindle. Gearbox not compatible with all spindle options. All machines available in CT or BT. † TM-1P and TM-3P only. Some items shown in this brochure are optional. Please contact your local distributor for assistance. Typical power curve Enhanced power range with on-the-fly wye-delta
18 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 19 MAIN SPINDLE FEATURES
30).$,% 3490%3
-ORE 3PINDLE 4ORQUE Cutting performance and material removal rates are a product of torque, speed, and power. These "ELT $RIVE The standard configuration for many 40-taper VMCs is a Haas-built cartridge charts show two of the enhanced-performance spindle that is driven by the motor via belt. This provides a good combination of torque and rpm for options available for your Haas VMC. The top a wide selection of machining operations. It is a great overall value. shows a gear-driven, 7500-rpm spindle, and the bottom chart shows a gear-driven, high-torque, 10,000-rpm spindle. )NLINE $RIVE The most advanced Haas spindle design is an innovative 12,000-rpm, inline direct-drive spindle that is coupled directly to the motor. This provides smooth operation for excellent surface finishes, and reduces operating heat for greater thermal stability.
(Available only on VM & SS models .)
3PINDLE (EAD 4HERMAL 3TABILITY %NHANCEMENTS 'EAR $RIVE The Haas geared-head spindle provides increased low-end torque for heavy cutting, while retaining the ability to run up to 10,000 rpm for high-speed machining. It is standard An independent jacket in our head casting surrounds the spindle. Coolant circulates through this jacket to on 50-taper machines, providing 450 ft-lb of torque, and optional on 40-taper machines, providing remove heat generated by the spindle, which minimizes thermal distortion of the head, eliminating Y- and 250 ft-lb of torque. Z-axis changes. Because the coolant touches all parts of the machining area, it accurately reflects the overall temperature of the machine. To improve thermal stability further, we’ve insulated the head and increased the air flow through the 3YNCHRONIZED 4APPING spindle-head assembly. Cool air enters from the rear of the machine, flows around the spindle and exits 6IBRATION )SOLATED 'EARBOX Haas An encoder attached to the Haas high- at the top, away from the spindle head. has invested more than $4 million in the finest gear-making performance spindle synchronizes Z-axis motion A chiller-ready provision is also available for VF-1 through VF-12 40-taper models for customers wanting and inspection equipment in the world. Haas gears are CNC with the spindle’s rotation. Synchronized tapping to add an aftermarket spindle chiller. machined and hobbed out of alloy steel, heat-treated to eliminates the need for expensive floating tap 60 Rc, and then precision CNC ground to AGMA Class 13 holders, and prevents lead-thread distortion and quality. A dry-sump oiling system circulates oil to all vital areas start-thread pullout. The tap can also reverse out of the gearbox, and polyurethane mounts eliminate vibrations of a rigid-tapped hole faster than it went in, which that could show up on finishing passes. can reduce cycle times.
(Standard on all machines except GR, Mini Mill and Toolroom Mill.) Specifications subject to change without notice. Not responsible for typographical errors.
20 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 21 &ROM CONCEPT TO REALITY TOOL MANAGEMENT The Haas-designed and -built side-mount tool changer symbolizes our focus on in-house design, development, and manufacturing. It’s the best way to ensure total control. We use this approach to refine our processes, control costs, and ensure a consistent high level of quality in everything we build.
)NSIDE 4HE (AAS 3IDE -OUNT 4OOL #HANGER %CONOMICAL %LECTRONIC The synchronized cycloidal motion of our side-mount tool changers is controlled by 4OOL #HANGER The standard Haas 40-taper precision cams that are manufactured in-house on standard Haas 5-axis machines. This tool changer is an economical choice for cost-conscious rugged, dependable design uses a special Haas worm-gear drive and an electronically shops. A sinusoidal motion arm accelerates and controlled start/stop system for long life and maintenance-free operation. Every Haas decelerates the shuttle for smooth operation, and each SMTC is manufactured completely in-house to guarantee fast, smooth, reliable operation. pocket has a retractable cover that prevents chips from entering the changer and sticking on the tool tapers. 4OOL #HANGER 3PECIFICATIONS Simple design and minimal moving parts guarantee long Tool Changer Type # Tools Machine Models Tool-to-Tool Chip-to-Chip Max Diameter life and reliable service. full (adj empty) 4APER /FFERS -ORE
(Standard on Mini Mill and VF-1 through VF-5 40-taper models. VF-6 through VF-12 and Standard configuration 40 Taper 50 Taper all 50-taper models come standard with a side-mount tool changer.) 40-taper umbrella-style 20 VF-1 thru VF-5 4.2 sec 4.5 sec 3.5" Gage diameter (A) 1.750" 2.750" 44.45 mm 69.85 mm 40-taper side-mount 24+1 VF-2SS thru VF-5SS 1.6 sec 2.2 sec 3" (5") Taper length (B) 2.687" 4.000" 40-taper side-mount 24+1 VF-6SS 2.3 sec 3.2 sec 3" (6") 68.25 mm 101.60 mm
40-taper side-mount 24+1 VF-6 thru VF-12 2.8 sec 3.6 sec 3" (6") Tool clamp force* 1,800 lb 4,000 lb A 8 007 N 17 793 N 50-taper side-mount 30+1 VF-5/50 thru VF-12/50 4.2 sec 6.3 sec 4" (10" 1 ) Max tool weight 12 lb 30 lb B 5.4 kg 13.6 kg
Max tool diameter 6" 10" Optional configuration 152.4 mm 254 mm 40-taper side-mount 24+1 VF-1 thru VF-5 2.8 sec 3.6 sec 3" (5" 2) 40-taper side-mount 40+1 VF-2YT thru VF-12 2.8 sec 3.6 sec 3" (5" 3, 6"4) *Nominal
1) VF-5/50 max diameter 4" ( 7 ") 2) VF-5/40 max diameter 3" ( 6 ") 3) VF-2YT to VF-4 4) VF-5 to VF-12
22 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 23 CHIP AND COOLANT MANAGEMENT
3INGLE !UGER All Haas VMCs are available with a single, auger- style chip conveyor that automatically removes chips from the machine, while compressing them and wringing out the coolant at the same time. For added reliability, the system reverses automatically if a jam occurs.
4RIPLE !UGER VF-1 and VF-2 machines (all models) are available with a high-volume chip-removal system comprising dual side augers to transport chips to the front of the pan, and a primary chip auger to discharge the chips from the machine.
1UAD !UGER VF-3 through VF-6 machines (all models) are available with a high-volume chip-removal system comprising four side augers to transport chips to the front of the pan, and a belt-type chip conveyor to discharge chips from the machine at barrel height. The belt conveyor may be installed on either side of the machine.
#HIP 2EMOVAL 3YSTEMS People buy CNC machines to make parts faster. The last thing they want is to waste time removing chips. Haas VMCs are available with an optional single- or multi-auger system that automatically removes chips from the enclosure and conveniently discharges them at the side of the machine.
24 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 25 CHIP AND COOLANT MANAGEMENT
PSI OR PSI 4HROUGH 3PINDLE #OOLANT Through-spindle coolant uses an auxiliary pump to supply coolant through the tool, directly to the cutting edge. This increases tool life, allows higher cutting speeds, and clears chips during deep-hole drilling and blind-pocket milling. Two systems are available. One provides up to 300 psi to the cutting edge, and the other provides up to 1000 psi. The 1000 psi system includes the auxiliary coolant filter (described below). The actual pressure of both systems will vary with the size of the coolant passages in the tool.
&LOW 2ATE $YNAMICS For both the 300 psi and 1000 psi through-spindle coolant options, the highest pressure occurs at the lowest flow rate. The actual pressure delivered to the cutting edge depends on the size of the coolant passages in the tool. Smaller coolant passages restrict the flow, causing the pressure to increase (up to the maximum provided by the system). Conversely, larger coolant passages in the tool allow more fluid to pass through, resulting in lower pressure at the cutting edge.
8.0
7.0
6.0
5.0
4.0
3.0
2.0 Volume (GPM) Volume 1.0 300 psi 0ROGRAMMABLE #OOLANT .OZZLE We spent time TSC output 1,000 psi TSC output 0 watching operators machining parts and noticed they were constantly opening 300 1,000 the doors of the machine to readjust coolant lines. Our programmable coolant nozzle is controlled automatically by the part program to direct coolant precisely at the cutting area, eliminating constant adjustments by the operator. The nozzle can also be adjusted from the keypad while a program is running. !UXILIARY #OOLANT &ILTER This 25-micron, #2 bag-type filter system removes contamination and minute particles from the coolant before they can be recirculated through the coolant pump. 2EAR #OOLANT $ISCHARGE Haas VMCs now discharge coolant at the rear of the machine, directly into a chip tray spanning the high- volume, roll-out coolant tank. The large-capacity chip tray prevents chips from #OOLANT ,EVEL 3ENSOR A sensor in the coolant tank allows you to monitor entering the coolant tank, and is easily cleaned without removing the tank. All coolant level directly on the control screen, preventing damaged tools and saving time. electrical and hose connections at the tank can be removed easily, and the lid and pump can be lifted up and out without removing any fasteners.
s ,ARGE CAPACITY CHIP TRAY s +EEPS CHIPS OUT OF THE COOLANT TANK 7ASTE /IL#OOLANT 3EPARATOR During normal operation, tramp oil and s 2ELIABLE AND TROUBLE FREE s #ONVENIENT AND EASY TO MAINTAIN coolant can collect inside a machine’s base casting. This unit removes the oil before it can enter s !CCESSIBLE FROM THE BACK OF THE MACHINE s )N PLAIN VIEW the machine’s coolant system, significantly increasing coolant life and reducing costs.
26 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 27 OPERATOR CONVENIENCE 7ORK AND 4OOL 0ROBE &EATURES s %XCELLENT REPEATABILITY s #YCLE TIME REDUCTION s (IGH PROTECTION AGAINST COOLANT s (IGH RELIABILITY s (IGH PERFORMANCE s .O WIRES IN THE WORK ENVELOPE s %ASY AND INTUITIVE PROGRAMMING of measuring cycles
/PERATOR 7ORK 3TATION This versatile work station offers a convenient place to keep toolholders, change cutting tools, store accessories, and much more – right at the machine. The heavy-duty stainless-steel work table offers a stable surface for inspecting parts or changing inserts, and a built-in worklight provides plenty of light for checking prints or viewing surface finish. The large storage shelf has plenty of room for larger tools, and features a turned-up lip to keep small items from rolling out. An additional rack on the side holds smaller hand tools, such as wrenches and screwdrivers.
s "UILT IN WORK LIGHT !UTOMATIC !IR 'UN Provides a constant blast of air to the cutting tool to clear chips during dry machining. Activated by M-code, the air gun can be programmed to turn on while the s ,ARGE STORAGE SHELF spindle is turning, or at the end of a cycle. Air consumption for the auto air gun is 6 scfm. s 4OOLHOLDER TRAY HOLDS MORE TOOLS s (EAVY DUTY STAINLESS STEEL WORK TABLE $OOR !CTIVATED (IGH )NTENSITY ,IGHTING Halogen lights provide (AAS 7IRELESS )NTUITIVE 0ROBING 3YSTEM The Haas Wireless bright, even illumination of the work area for part inspection, job set up, and changeovers. Lights turn s 3IDE RACK FOR WRENCHES AND SCREWDRIVERS Intuitive Probing System (WIPS), with optical transmission for part setting, tool setting, and inspection, consists of the following elements: on and off automatically when doors open and close, or can be activated manually via a switch. s "UILT IN TOOLHOLDER VISE TAPER MACHINES s 3PINDLE 0ROBE -ODULE WORK PROBE 3ERVO !UTO $OOR This option opens and closes the machine doors automatically via s 4OOL 3ETTER -ODULE TOOL PROBE the part program. This reduces operator fatigue during repetitive machining operations, or allows for s )NTUITIVE 0ROBING 3YSTEM 3OFTWARE unattended operation when used with a robotic loader. (Available on VF-1 through VF-5.) The Haas Wireless Intuitive Probing System makes probing easy to understand and use through simple language, a graphical interface, and clear instructions. 0ENDANT 3TORAGE #ABINET Our new thin control pendant is lighter, but more Step-by-step graphical instructions show machine operators how to set up the probing cycles. stable and easier to maneuver. A large cabinet behind the pendant houses the operator’s manual, and provides plenty of storage for tools, gauges, spare inserts, and much more. A convenient “glove The Haas Intuitive Probing System software guides the operator through the probing set-up process, box” below the pendant provides additional storage, and the hinged door folds down to form a prompting them to enter each necessary dimension. convenient shelf. Once all dimensions are entered, the operator executes the probing cycle by pushing the Cycle Start button. The probing cycle can then be saved in memory, and recalled when needed. With the Haas Intuitive Probing System, no knowledge of G-code or macro programming is needed to use the probing system. WIPS is available as a factory-installed option on most new Haas VMCs.
28 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 29 -ACHINE #ONlGURATIONS /PTIONS 2010 VMC PRODUCT LINE ▲ = Available configuration ● = Standard on 40-taper machines ❍ = Optional on 40-taper machines ■ = Standard on 50-taper machines ❑ = Optional on 50-taper machines SPINDLE CONFIGURATIONS TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 VM VR VS GR MDC
40-TAPER SPINDLE ● ● ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ● ● ● ●
50-TAPER SPINDLE ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ■ 2-SPEED GEARBOX ❍ ❍ ❍ ❍ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ■ CT SPINDLE ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ BT SPINDLE ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ 4,000 RPM ● 5,000 RPM ❍ 6,000 RPM ❍ 10,000 RPM HIGH-TORQUE 10,000 RPM ▲ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍
12,000 RPM ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
15,000 RPM ▲ ▲ ▲ ▲ ▲ ● 30,000 RPM ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
TOOL CHANGERSTM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 VM VR VS GR MDC
24-POCKET SMTC ❍ ❍ ❍ ❍ ❍ ❍ ● ● ● ● ● ● ● ● ●
30-POCKET SMTC ■ ■ ■ ■ ■ ■ ■ ■ ■ 40-POCKET SMTC ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
SPECIAL MACHINES TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 VM VR VS GR MDC
SUPER-SPEED MODEL ▲ ▲ ▲ ▲ ▲ ▲
5-AXIS TRUNNION MODEL ▲ ▲ ▲
SPECIAL OPTIONS TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 VM VR VS GR MDC
AUTO AIR GUN ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍
AUX. COOLANT FILTER ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ AUTO PALLET CHANGER ▲ ▲ AUTOMATIC CHIP AUGER ❍ ❍ ❍ ❍ ❍ ❍ ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ■ ● EXTENDED Z-AXIS CLEARANCE Office Mills 40-Taper Standard VMCs 50-Taper Standard VMCs VF-6TR 64"x32"x30" (xyz) Gantry ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ OM-1A 8"x8"x12" (xyz) VF-1 20"x16"x20" (xyz) VF-3YT/50 40"x26"x25" (xyz) 1 626x813x762 mm SR-100 100"x52"x8" (xyz) EXTENDED Y AXIS VF-6/50TR 64"x32"x30" (xyz) ▲ ▲ ▲ 203x203x305 mm 508x406x508 mm 1 016x660x635 mm 2 540x1 321x203 mm EXTENDED X AXIS OM-2A 12"x10"x12" (xyz) VF-1YT 20"x20"x20" (xyz) VF-5/50 50"x26"x25" (xyz) 1 626x813x762 mm GR-510 121"x61"x11" (xyz) ▲ 305x254x305 mm 508x508x508 mm 1 270x660x635 mm VR-8 64"x40"x30" (xyz) 3 073x1 549x279 mm 95-GALLON COOLANT TANK ❍ ❍ ❍ ❍ ❍ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ❍ ● ■ VF-2 30"x16"x20" (xyz) VF-5/50XT 60"x26"x25" (xyz) 1 626x1 016x762 mm GR-712 145"x85"x11" (xyz) LINEAR SCALES VR-11 120"x40"x30" (xyz) Toolroom Mills 762x406x508 mm 1 524x660x635 mm 3 683x2 159x279 mm PROGRAMMABLE COOLANT ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ■* TM-1 30"x12"x16" (xyz) VF-2YT 30"x20"x20" (xyz) VF-6/50 64"x32"x30" (xyz) 3 048x1 016x762 mm 762x305x406 mm 762x508x508 mm 1 626x813x762 mm Mold Machines THROUGH-SPINDLE COOLANT ❍ ❍ ❍ ❍ ❍ ❍ ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ❑ ❍ ❍ TM-1P 30"x12"x16" (xyz) VF-3 40"x20"x25" (xyz) VF-7/50 84"x32"x30" (xyz) VMCs with APC VM-2 30"x20"x20" (xyz) EXTRA RAPID TRAVERSE ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ 762x305x406 mm 1 016x508x635 mm 2 134x813x762 mm (Automatic Pallet Changer) 762x508x508 mm HIGH-INTENSITY LIGHTING TM-2 40"x16"x16" (xyz) VF-3YT 40"x26"x25" (xyz) VF-8/50 64"x40"x30" (xyz) VF-3APC 40"x20"x25" (xyz) VM-3 40"x26"x25" (xyz) ▲ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ 1 016x508x635 mm AUTOMATIC DOOR 1 016x406x406 mm 1 016x660x635 mm 1 626x1 016x762 mm 1 016x660x635 mm ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ TM-3 40"x20"x16" (xyz) VF-4 50"x20"x25" (xyz) VF-9/50 84"x40"x30" (xyz) VF-3SSAPC 40"x20"x25" (xyz) VM-6 64"x32"x30" (xyz) 1 016x508x406 mm 1 270x508x635 mm 2 134x1 016x762 mm 1 016x508x635 mm 1 626x813x762 mm ❍ ❍ ❍ ❍ ❍ ❑ VF-4APC 50"x20"x25" (xyz) TM-3P 40"x20"x16" (xyz) VF-5 50"x26"x25" (xyz) VF-10/50 120"x32"x30" (xyz) CONTROL OPTIONS TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 VM VR VS GR MDC 1 016x508x406 mm 1 270x660x635 mm 3 048x813x762 mm 1 270x508x635 mm Mill Drill Center VF-5XT 60"x26"x25" (xyz) VF-11/50 120"x40"x30" (xyz) VF-4SSAPC 50"x20"x25" (xyz) MDC-500 20"x14"x20" (xyz) EXPANDED MEMORY ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ● ❑ ❍ ❍ 1 270x508x635 mm Mini VMCs 1 524x660x635 mm 3 048x1 016x762 mm 508x356x508 mm 4TH-AXIS DRIVE ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ Mini Mill 16"x12"x10" (xyz) VF-6 64"x32"x30" (xyz) VF-12/50 150"x32"x30" (xyz) 5TH-AXIS DRIVE 406x305x254 mm 1 626x813x762 mm 3 810x813x762 mm Super-Speed VMCs Drill/Tap Center ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ VF-2SS 30"x16"x20" (xyz) 8 ADDITIONAL M FUNCTIONS Mini Mill 2 20"x16"x14" (xyz) VF-7 84"x32"x30" (xyz) DT-1 20"x16"x15.5" (xyz) ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ 508x406x356 mm 2 134x813x762 mm Large-Capacity VMCs 762x406x508 mm 508x406x394 mm COORD. ROTATION/SCALING Super Mini Mill 16"x12"x10" (xyz) VF-8 64"x40"x30" (xyz) VS-1 84"x50"x50" (xyz) VF-2SSYT 30"x20"x20" (xyz) ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❑ ❍ ❍ ETHERNET INTERFACE 762x508x508 mm 406x305x254 mm 1 626x1 016x762 mm 2 134x1 270x1 270 mm ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❑ ❍ ❍ Super MM 2 20"x16"x14" (xyz) VF-9 84"x40"x30" (xyz) VS-3 150"x50"x50" (xyz) VF-3SS 40"x20"x25" (xyz) RIGID TAPPING ❍ ❍ ● ● ● ● ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ■ ❍ ● 508x406x356 mm 2 134x1 016x762 mm 3 810x1 270x1 270 mm 1 016x508x635 mm HIGH-SPEED MACHINING VF-10 120"x32"x30" (xyz) VF-3SSYT 40"x26"x25" (xyz) ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ● ❑ ❍ ❍ USER-DEFINABLE MACROS 3 048x813x762 mm 5-Axis VMCs 1 016x660x635 mm VF-11 120"x40"x30" (xyz) VF-2TR 30"x16"x20" (xyz) VF-4SS 50"x20"x25" (xyz) REMOTE JOG HANDLE ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❑ ❍ ❍ 1 270x508x635 mm 3 048x1 016x762 mm 762x406x508 mm SPINDLE ORIENTATION ❍ ❍ ❍ ❍ ❍ ❍ ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ■ ❍ ❍ VF-12 150"x32"x30" (xyz) VF-5TR 38"x26"x25" (xyz) VF-5SS 50"x26"x25" (xyz) INTUITIVE PROGRAMMING 3 810x813x762 mm 965x660x635 mm 1 270x660x635 mm ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ VF-6SS 64"x32"x30" (xyz) TOOL & PART PROBING VF-5/50TR 38"x26"x25" (xyz) ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ 965x660x635 mm 1 626x813x762 mm ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍
Important: The above chart represents the standard configurations of machines distributed in North America. Machine configurations and availability may differ for other countries and regions. This chart is for reference only. Check with your local Haas distributor for exact pricing, configuration, and availability of machines and options. *X-axis scale only. 30 | America’s Leading Machine Tool Builder HIGH-PERFORMANCE VMCs HIGH PERFORMANCE
!XIS 4RUNNION -ACHINES The Haas Trunnion Series machines are versatile 5-axis 4HE 6- 3ERIES n 3PEED AND !CCURACY machining centers that provide full, simultaneous 5-axis motion for machining complex parts, or can position a workpiece to almost any angle for multi-side machining. FOR THE -OLD -AKING )NDUSTRY Designed specifically for mold makers, the VM Series machines feature the Haas 12,000-rpm, inline direct-drive spindle, a unique 40-taper design that provides superior surface finishes, The VF-5TR and VF-6TR have a dual-axis trunnion table mounted directly to the bearing trucks in place of excellent thermal stability, and quiet operation. VM machines come standard with an automatic chip auger, remote jog handle, the standard T-slot table. Both machines are available in 40- or 50-taper configurations. The VF-2TR has a automatic air gun, high-speed machining, Ethernet interface, 250 MB program memory, USB port, user-definable macros, removable dual-axis trunnion mounted to the standard T-slot table, which provides the flexibility to run the programmable coolant nozzle, and more. machine with or without the trunnion table installed. A unique, multi-fixture table provides T-slots in both X and Y directions, as well as drilled and tapped holes and precision dowel-pin bores. s $UAL !XIS 4ABLE s 53" 0ORT s ¢ª 4ILT ª 2OTATION s 2EMOTE *OG (ANDLE s 3IDE -OUNT 4OOL #HANGER s (IGH 3PEED -ACHINING W,OOK !HEAD s !UTOMATIC #HIP !UGER s 5SER $EFINABLE -ACROS s 0ROGRAMMABLE #OOLANT .OZZLE s -" 0ROGRAM -EMORY Available Models Available Models 6- 6& 42 6- 6& 42 n OR TAPER 6- 6& 42 n OR TAPER
32 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 33 HIGH-PERFORMANCE DRILL/TAP HIGH PERFORMANCE
4HE $4 is a compact, high-speed drill and tap machine with full milling capabilities. The machine 6& 33 3UPER 3PEED 6-#S n !FFORDABLE has a 20" x 16" x 15.5" (xyz) work cube and a 26" x 15" T-slot table. A powerful BT30 taper inline direct- The Haas SS Series high-performance vertical machining drive spindle provides 15,000 rpm, and allows rigid tapping at speeds to 5000 rpm. A high-speed side- (IGH 3PEED 0ERFORMANCE centers come standard with an innovative 12,000-rpm, inline direct-drive spindle, a high-speed side-mount tool mount tool changer swaps tools quickly, while 2400 ipm rapids on all axes and 1G acceleration/deceleration changer and high-speed rapids for reduced cycle times. rates combine to shorten cycle times and reduce non-cutting time. The all-around enhanced performance of the Super-Speed machines yields shorter cycle times and more parts Steeply sloped internal sheet metal and available per shift, making them some of the more popular innovations offered by Haas Automation. dual chip augers efficiently move chips to the rear of the DT-1 for discharge.
Available Models 6& 33 6& 3394 6& 33 6& 3394
The DT-1’s high-speed 20+1 tool side-mount 6& 33 tool changer swaps tools in 0.8 seconds. The 6& 33 15,000-rpm inline direct-drive spindle allows rigid tapping to 5000 rpm, with up to 4-times 6& 33 retract speed.
The user-friendly Haas control and available Intuitive Programming System make the DT-1 easy to program and operate.
34 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 35 MACHINING WITH HAAS VMCs
7HATS NEW n The latest Haas vertical machining centers feature refinements focused both on the machine owner and on the operator. The latest version of the Haas control features a simplified user interface and powerful operator features. The new-generation Haas VMCs are easier than ever to operate, and they perform with more speed, better chip evacuation, better coolant containment, smoother surface finishes, and more operator-friendly features than ever. Whether you focus on high-production output or specialized short-run work, there’s a Haas machining center with the features and price tag to help you succeed.
(ERE ARE SOME EXAMPLES OF WHATS NEW #HIP EVACUATION n We redesigned the chip pans and reviewed coolant flow of the new VMCs to reduce chip build-up and efficiently flush chips into the auger trough for removal. For high-volume production applications, the VF-1 through VF-6 VMCs are available with optional chip removal systems that combine multiple side augers with either a front discharge auger or belt-type conveyor to move chips out of the machines faster and easier than ever. #OOLANT CONTAINMENT n To prevent chip and coolant egress during machining, we optimized the enclosures on the new VMCs, paying close attention to panel fit, service access, and internal routing of plumbing and cables. The result is a far better enclosure and a much simpler overall design that thoroughly contains chips and coolant, while increasing reliability and simplifying service. %RGONOMICS n Our engineers worked hard to make everything the operator touches work better. For example, the machines’ windows and doors are now stiffer, move more smoothly, and close tightly. And our new thin-design control pendant is mounted directly to the enclosure, providing a lighter but more stable operator interface than the previous version, with a convenient storage compartment behind the pendant. %NHANCED MOTION CONTROL n To ensure smooth, precise motion control, the new Haas VMCs use next- generation digital servomotors and high-resolution encoders on all axes. Combined with significant software and motor-control advancements on the new machines, these yield better surface-finish performance and higher accelerations. These latest versions of the wildly popular Haas VMCs are the best machines we’ve ever made – providing more performance and value than ever before.
36 | America’s Leading Machine Tool Builder Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 37 WORK SMART ROTARY TABLES & INDEXERS
Adding a fully integrated 4th- or 5th-axis 4( !.$ 4( !8)3 /04)/.3 SCOLCR SC02-ACR Haas brushless rotary table to your Haas VMC creates a supercharged machining center package that boosts your productivity and reduces setups. Fully synchronized 4th- and 5th-axis configurations are available on most Haas VMC models.
HA5CSB HA5C HA5C 2 HA5C 3 HA5C 4
T5C T5C 2 T5C 3 T5C 4
HRT110 HRT160 HRT210 HRT310 HRT320/FB HRT450 HRT600
HRT160SP HRT210SP HRT310SP HRTA5 HRTA6
NEW, FASTER ROTARY SPEEDS HRT160-2 HRT210-2 HRT210SHS-HD TRT160 TRT210 2OTARY -ODELS TH !XIS 3PEED !CCELERATION "RAKE $WELL 4IME
HA5C (5C collet rotary) 25% Increase (now 410°/sec) 45% Increase —
HRT160, HRT160SP, HRTA5 30% Increase (now 130°/sec) 33% Increase 89% Reduction TR110 TR160Y TR160 TR160-2 160 mm platter table
HRT210, HRT210SP, HRTA6 34% Increase (now 100°/sec) 125% Increase 89% Reduction 210 mm platter table
HRT310, HRT310SP 26% Increase (now 75°/sec) 33% Increase 95% Reduction
310 mm platter table TR210 TR310
38 | America’s Leading Machine Tool Builder Some items shown in this brochure are optional. Please contact your local distributor for assistance. Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 39 -ACHINE $IMENSIONS
D A
Y B Z
W C E X
0.640" 16.3 mm L2
L1 0.630" 16 mm F
M G H K 1.06" 0.42" 26.9 mm 10.7 mm J I
Side View VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 A 92.80" 92.80" 110.00" 110.00" 114.00" 111.00" 111.00" 139.00" 139.00" 111.00" 139.00" 111.00" 2357 mm 2357 mm 2794 mm 2794 mm 2895 mm 2819 mm 2819 mm 3531 mm 3531 mm 2819 mm 3531 mm 2819 mm B (40 Taper) 104.50" 104.50" 117.50" 117.50" 118.20" 124.00" 124.00" 124.00" 124.00" 124.00" 124.00" 124.00" 2654 mm 2654 mm 2985 mm 2985 mm 3002 mm 3150 mm 3150 mm 3150 mm 3150 mm 3150 mm 3150 mm 3150 mm B (50 Taper) – – – – 126.50" 138.00" 138.00" 138.00" 138.00" 138.00" 138.00" 138.00" 3213 mm 3505 mm 3505 mm 3505 mm 3505 mm 3505 mm 3505 mm 3505 mm C 58.00" 58.00" 74.40" 74.40" 82.88" 94.00" 94.00" 110.00" 110.00" 98.00" 110.00" 94.00" 1473 mm 1473 mm 1890 mm 1890 mm 2105 mm 2388 mm 2388 mm 2794 mm 2794 mm 2489 mm 2794 mm 2388 mm D 36.00" 36.00" 36.00" 36.00" 36.00" 30.00" 30.00" 30.00" 30.00" 30.00" 30.00" 30.00" 914 mm 914 mm 914 mm 914 mm 914 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mm Front View VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 E 94.00" 94.00" 122.00" 122.00" 137.00" 156.00" 183.00" 156.00" 183.00" 257.00" 257.00" 330.00" 2388 mm 2388 mm 3099 mm 3099 mm 3480 mm 3962 mm 4648 mm 3962 mm 4648 mm 6528 mm 6528 mm 8382 mm GOING GREEN F 64.00" 64.00" 67.20" 67.20" 70.50" 70.00" 70.00" 70.00" 70.00" 70.00" 70.00" 70.00" 1626 mm 1626 mm 1707 mm 1707 mm 1791 mm 1778 mm 1778 mm 1778 mm 1778 mm 1778 mm 1778 mm 1778 mm Long before “Green” meant lessening one’s carbon footprint, Haas G 42.95" 42.95" 46.15" 46.15" 49.15" 55.15" 55.15" 55.15" 55.15" 55.15" 55.15" 55.15" 1091 mm 1091 mm 1172 mm 1172 mm 1248 mm 1401 mm 1401 mm 1401 mm 1401 mm 1401 mm 1401 mm 1401 mm machines had the ability to save you money by reducing electricity H 32.00" 32.00" 30.30" 30.30" 33.20" 34.00" 34.00" 34.00" 34.00" 34.00" 34.00" 34.00" usage while the machine was in idle mode. 813 mm 813 mm 770 mm 770 mm 843 mm 864 mm 864 mm 864 mm 864 mm 864 mm 864 mm 864 mm I (Door Opening) 35.50" 35.50" 48.50" 48.50" 54.00" 69.00" 95.20" 69.00" 95.20" 125.00" 125.00" 125.50" 902 mm 902 mm 1232 mm 1232 mm 1372 mm 1753 mm 2418 mm 1753 mm 2418 mm 3175 mm 3175 mm 3188 mm While Haas engineers continue to improve the electrical efficiency of J 30.00" 30.00" 42.50" 42.50" 42.50" 60.00" 60.00" 60.00" 60.00" 60.00" 60.00" 60.00" 762 mm 762 mm 1080 mm 1080 mm 1080 mm 1524 mm 1524 mm 1524 mm 1524 mm 1524 mm 1524 mm 1524 mm Haas machines, below are several things you can do today to further K 27.54" 27.54" 27.31" lower electricity usage in your Haas machining center. 1 27.31"1 27.31"1 23.20"2 23.20" 23.20" 23.20" 23.20" 23.20" 23.20" 700 mm 700 mm 694 mm 694 mm 694 mm 589 mm 589 mm 589 mm 589 mm 589 mm 589 mm 589 mm L1 21.81" 21.81" 20.86" 20.86" 11.18" 21.72" 8.00" 21.72" 8.00" 8.00" 8.00" 8.00" 554 mm 554 mm 530 mm 530 mm 284 mm 552 mm 203 mm 552 mm 203 mm 203 mm 203 mm 203 mm L2 – – 38.81" 38.81" 38.81" 47.45" – – – – – – SAVING ENERGY MEANS SAVING MONEY 986 mm 986 mm 986 mm 1205 mm M 33.00" 33.00" 36.50" 3 36.50"3 36.50"3 43.00"4 43.00" 43.00" 43.00" 43.00" 43.00" 43.00" s !UTO 0OWER /FF SETTING TURNS THE MACHINE OFF AFTER A s ,#$ "ACKLIGHT /FF SETTING BLANKS THE ,#$ AFTER A 838 mm 838 mm 927 mm 927 mm 927 mm 1092 mm 1092 mm 1092 mm 1092 mm 1092 mm 1092 mm 1092 mm specified number of minutes idle specified number of minutes idle Table VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 W 2.08" 2.08" 2.70" 2.70" 2.05" 4.16" 4.16" 3.24" 3.24" 4.16" 4.16" 4.16" s 0OWER /FF AT - SETS THE CONTROL TO START A SECOND s #ONVEYOR /FF SETTING AUTOMATICALLY TURNS OFF THE CHIP 52.8 mm 52.8 mm 68.6 mm 68.6 mm 52.1 mm 105.7 mm 105.7 mm 82.3 mm 82.3 mm 105.7 mm 105.7 mm 105.7 mm X 26.00" 36.00" 48.00" 52.00" 52.00" 64.00" 84.00" 64.00" 84.00" 120.00" 120.00" 150" timer that will turn off all power unless interrupted conveyor after a specified number of minutes idle 660 mm 914 mm 1219 mm 1321 mm 1321 mm 1626 mm 2134 mm 1626 mm 2134 mm 3048 mm 3048 mm 3810 mm Y 14.00" 14.00" 18.00" 18.00" 23.00" 28.00" 28.00" 36.00" 36.00" 28.00" 28.00" 28.00" s 3LEEP -ODE PUTS THE MACHINE INTO A LOW POWER MODE s 3ERVOS AND (YDRAULICS /FF SETTING AUTOMATICALLY TURNS 356 mm 356 mm 457 mm 457 mm 584 mm 711 mm 711 mm 914 mm 914 mm 711 mm 711 mm 711 mm Z 4.92" 4.92" 3.15" 3.15" 3.15" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92" for a programmed length of time off the servos and hydraulic pump after a specified 125.0 mm 125.0 mm 80.0 mm 80.0 mm 80.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm number of minutes idle T-Slots VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 s 3CREEN 3AVER SETTING Number on Table 3 3 5 5 7 5 5 7 7 5 5 5 Refer to your operator’s manual for detailed information on these settings and more. 1) Add 23.06" (586 mm) for conveyor. 2) Add 27.18" (690 mm) for conveyor. 3) Add 31.18" (792 mm) for conveyor. 4) Add 24.68" (627 mm) for conveyor. 40 | America’s Leading Machine Tool Builder -!#().% 30%#)&)#!4)/.3 (Standard 40-Taper Machines)
VF-1 | VF-1YT VF-2 | VF-2YT VF-3 | VF-3YT VF-4 VF-5 | VF-5XT VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VF-12 VM-2 VM-3 VM-6 MDC X 20" 30" 40" 50" 50" | 60" 64" 84" 64" 84" 120" 120" 150" 30" 40" 64" 20" 508 mm 762 mm 1 016 mm 1 270 mm 1 270 mm | 1 524 mm 1 626 mm 2 134 mm 1 626 mm 2 134 mm 3 048 mm 3 048 mm 3810 mm 762 mm 1016 mm 1626 mm 508 mm Y 16" | 20" 16" | 20" 20" | 26" 20" 26" 32" 32" 40" 40" 32" 40" 32" 20" 26" 32" 14" 406 mm | 508 mm 406 mm | 508 mm 508 mm | 660 mm 508 mm 660 mm 813 mm 813 mm 1 016 mm 1 016 mm 813 mm 1 016 mm 813 mm 508 mm 660 mm 813 mm 356 mm Travels Z 20" 20" 25" 25" 25" 30" 30" 30" 30" 30" 30" 30" 20" 25" 30" 20" 508 mm 508 mm 635 mm 635 mm 635 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mm 508 mm 635 mm 762 mm 508 mm Spindle Nose to Table 4 - 24" 4 - 24" 4 - 29" 4 - 29" 7 - 32" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 24" 4 - 29" 4 - 34" 4 - 24" 102 - 610 mm 102 - 610 mm 102 - 737 mm 102 - 737 mm 178 - 813 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 610 mm 102 - 737 mm 102 - 864 mm 102 - 610 mm Length 26" 36" 48" | 54" 52" 52" | 62" 64" 84" 64" 84" 120" 120" 150" 36" 54" 64" 20" 660 mm 914 mm 1 219 mm | 1372 mm 1 321 mm 1321 mm | 1 575 mm 1 626 mm 2 134 mm 1 626 mm 2 134 mm 3 048 mm 3 048 mm 3 810 mm 914 mm 1 372 mm 1626 mm 508 mm Width 14" | 18" 14" | 18" 18" | 25" 18" 23" 28" 28" 36" 36" 28" 28" 28" 18" 25" 28" 12.75" 356 mm | 457 mm 356 mm | 457 mm 457 mm | 635 mm 457 mm 584 mm 711 mm 711 mm 914 mm 914 mm 711 mm 711 mm 711 mm 457 mm 635 mm 711 mm 324 mm Max Weight on Table 3,000 lb 3,000 lb 3,500 lb 3,500 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 3,000 lb 4,000 lb 4,000 700 lb per pallet 1 361 kg 1 361 kg 1 588 kg 1 588 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 361 kg 1 814 kg 1 814 kg 318 kg Table T-Slot Width 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" 5/8" 5/8" 5/8" 5/8" 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 22 mm 16 mm 16 mm 16 mm 16 mm T-Slot Center Distance 4.92" 4.92" 3.15" 3.15" 3.15" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 4.375" 3.973" 4.92" 4.92" 125 mm 125 mm 80 mm 80 mm 80 mm 125 mm 125 mm 125 mm 125 mm 125 mm 125 mm 125 mm 111 mm 100 mm 125 mm 125 mm Taper Size #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper Speed 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 12,000 max rpm 12,000 max rpm 12,000 max rpm 7,500 max rpm Drive System Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Inline Inline Inline Direct Speed Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Direct Drive Direct Drive Direct Drive Belt Drive Max Torque Standard 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 2,100 75 ft-lb @ 2,100 75 ft-lb @ 2,100 75 ft-lb @ 1,400 102 Nm @ 1400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 2 100 102 Nm @ 2 100 102 Nm @ 2 100 102 Nm @ 1 400 with Optional Gearbox 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 – – – – 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 – – – – Spindle Bearing Lubrication Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Cooling Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Spindle Motor Max Rating
1 20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 30 hp 30 hp 30 hp 20 hp 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 22.4 kW 22.4 kW 22.4 kW 14.9 kW 2,550 lb 2,550 lb 2,550 lb 2,550 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 5,600 lb 3,400 lb 2,550 lb X 11 343 N 11 343 N 11 343 N 11 343 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 24 910 N 15 124 N 11 343 N
Max Thrust Rating 2,550 lb 2,550 lb 2,550 lb 2,550 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 5,600 lb 3,400 lb 2,550 lb Y 11 343 N 11 343 N 11 343 N 11 343 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 15 124 N 24 910 N 15 124 N 11 343 N 4,200 lb 4,200 lb 4,200 lb 4,200 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb Z 18 683 N 18 683 N 18 683 N 18 683 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 24 910 N 1,000 ipm 1,000 ipm 1,000 ipm 1,000 ipm 710 ipm | 540 ipm 540 ipm 600 ipm 540 ipm 600 ipm 360 ipm 360 ipm 360 ipm 710 ipm 710 ipm 540 ipm 1,000 ipm X Axis Motors 25.4 m/min 25.4 m/min 25.4 m/min 25.4 m/min 18.0 m/min | 13.7 m/min 13.7 m/min 15.2 m/min 13.7 m/min 15.2 m/min 9.1 m/min 9.1 m/min 9.1 m/min 18.0 m/min 18.0 m/min 13.7 m/min 25.4 m/min Rapids 1,000 ipm 1,000 ipm 1,000 ipm | 710 ipm 1,000 ipm 710 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 710 ipm 710 ipm 600 ipm 1,000 ipm Y 25.4 m/min 25.4 m/min 25.4 m/min | 18.0 m/min 25.4 m/min 18.0 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 18.0 m/min 18.0 m/min 15.2 m/min 25.4 m/min 1,000 ipm 1,000 ipm 1,000 ipm | 710 ipm 1,000 ipm 710 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 710 ipm 710 ipm 600 ipm 1,000 ipm Z 25.4 m/min 25.4 m/min 25.4 m/min | 18.0 m/min 25.4 m/min 18.0 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 18.0 m/min 18.0 m/min 15.2 m/min 25.4 m/min Max Cutting 650 ipm 650 ipm 650 ipm 650 ipm 500 ipm 500 ipm 500 ipm 500 ipm 500 ipm 360 ipm 360 ipm 360 ipm 500 ipm 500 ipm 500 ipm 833 ipm 16.5 m/min 16.5 m/min 16.5 m/min 16.5 m/min 12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min 9.1 m/min 9.1 m/min 9.1 m/min 12.7 m/min 12.7 m/min 12.7 m/min 21.1 m/min Capacity Standard (optional) 2 20 (24+1) 20 (24+1) 20 (24+1, 40+1) 20 (24+1, 40+1) 20 (24+1, 40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) Tool Type / Taper CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 Max Tool Diameter Standard 3.5" (full) 3.5" (full) 3.5" (full) 3.5" (full) 3.5" (full) 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 5" 3" / 5" 3" / 6" 3" / 6" (full / adjacent empty) 89 mm 89 mm 89 mm 89 mm 89 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 127 mm 76 mm / 127 mm 76 mm / 152 mm 76 mm / 152 mm Max Tool Weight 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb Tool Changer 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg Changer Type Standard (Optional) Carousel (SMTC) Carousel (SMTC) Carousel (SMTC) Carousel (SMTC) Carousel (SMTC) SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC Tool to Tool (optional) 4.2 sec (2.8) 4.2 sec (2.8) 4.2 sec (2.8) 4.2 sec (2.8) 4.2 sec (2.8) 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.2 sec Chip to Chip (optional) 4.5 sec (3.6) 4.5 sec (3.6) 4.5 sec (3.6) 4.5 sec (3.6) 4.5 sec (3.6) 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 4.8 sec Positioning ±0.0002" ±0.0002" ±0.0002" ±0.0002" ±0.0002" ±0.0003" 3 ±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0002" ±0.0002" ±0.0003" ±0.0002" ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.005 mm ±0.005 mm ±0.008 mm ±0.005 mm Accuracy Repeatability ±0.0001" ±0.0001" ±0.0001" ±0.0001" ±0.0001" ±0.0002" 3 ±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0001" ±0.0001" ±0.0002" ±0.0001" ±0.003 mm ±0.003 mm ±0.003 mm ±0.003 mm ±0.003 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.003 mm ±0.003 mm ±0.005 mm ±0.003 mm Machine Weight 7,100 lb | 7,400 lb 7,300 lb | 7,500 lb 12,500 lb | 14,000 lb 13,300 lb 14,600 lb | 15,150 lb 21,000 lb 23,000 lb 24,000 lb 25,000 lb 28,000 lb 29,400 lb 30,650 lb 7500 lb 14,000 lb 21,000 lb 14,000 lb 3 220 kg | 3 357 kg 3 311 kg | 3 402 kg 5 670 kg | 6 350 kg 6 033 kg 6 623 kg | 6 872 kg 9 526 kg 10 433 kg 10 886 kg 11 340 kg 12 701 kg 13 336 kg 13 903 kg 3 402 kg 6 350 kg 9526 kg 6 350 kg Air Required 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 9 scfm, 100 psi Miscellaneous 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 4.25 lpm, 6.9 bar Power Required (min) 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC
42 | America’s Leading Machine Tool Builder 1) 5-minute rating. 2) See page 22 for optional tool changer specifications. 3) Linear scales required to achieve accuracy listed. NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 43 VAC/kVA options available. Specifications subject to change without notice. Not responsible for misprints or typographical errors. -!#().% 30%#)&)#!4)/.3 (Standard 50-Taper Machines) WWW.HAASCNC.COM HAAS AUTOMATION INC. VF3YT/50 VF-5/50 | VF-5/50XT VF-6/50 VF-7/50 VF-8/50 VF-9/50 VF-10/50 VF-11/50 VF-12/50
X 40" 50" | 60" 64" 84" 64" 84" 120" 120" 150" 1016 mm 1270 mm | 1524 mm 1626 mm 2134 mm 1626 mm 2134 mm 3048 mm 3048 mm 3810 mm Y 26" 26" 32" 32" 40" 40" 32" 40" 32" 660 mm 660 mm 813 mm 813 mm 1016 mm 1016 mm 813 mm 1016 mm 813 mm Travels Z 25" 25" 30" 30" 30" 30" 30" 30" 30" 635 mm 635 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mm Spindle Nose to Table 7 - 32" 7 - 32" 5 - 35" 5 - 35" 5 - 35" 5 - 35" 5 - 35" 5 - 35" 5 - 35" 178 - 813 mm 178 - 813 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm Length 52" 52" | 62" 64" 84" 64" 84" 120" 120" 150" 1321 mm 1321 mm | 1575 mm 1626 mm 2134 mm 1626 mm 2134 mm 3048 mm 3048 mm 3810 mm Width 23" 23" 28" 28" 36" 36" 28" 28" 28" 584 mm 584 mm 711 mm 711 mm 914 mm 914 mm 711 mm 711 mm 711 mm Max Weight on Table 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 1814 kg 1814 kg 1814 kg 1814 kg 1814 kg 1814 kg 1814 kg 1814 kg 1814 kg Table T-Slot Width 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 22 mm T-Slot Center Distance 3.15" 3.15" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 80 mm 80 mm 125 mm 125 mm 125 mm 125 mm 125 mm 125 mm 125 mm Taper Size #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper #50 Taper Speed 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm Drive System 2-Speed 2-Speed 2-Speed 2-Speed 2-Speed 2-Speed 2-Speed 2-Speed 2-Speed Geared Head Geared Head Geared Head Geared Head Geared Head Geared Head Geared Head Geared Head Geared Head Max Torque Standard 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 Bearing Lubrication Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Spindle Cooling Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Spindle Motor Max Rating1 30 hp 30 hp 30 hp 30 hp 30 hp 30 hp 30 hp 30 hp 30 hp 22.4 kW 22.4 kW 22.4 kW 22.4 kW 22.4 kW 22.4 kW 22.4 kW 22.4 kW 22.4 kW
X 5,600 lb 5,600 lb 5,600 lb 3,400 lb 5,600 lb 3,400 lb 3,400 lb 3,400 lb 3,400 lb 24910 N 24910 N 24910 N 15124 N 24910 N 15124 N 15124 N 15124 N 15124 N
Max Thrust Rating Y 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N Z 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 5,600 lb 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N 24910 N Axis Motors X 710 ipm 710 ipm 540 ipm 600 ipm 540 ipm 600 ipm 360 ipm 360 ipm 360 ipm 18.0 m/min 18.0 m/min 13.7 m/min 15.2 m/min 13.7 m/min 15.2 m/min 9.1 m/min 9.1 m/min 9.1 m/min Rapids Y 710 ipm 710 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 18.0 m/min 18.0 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min Z 710 ipm 710 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 18.0 m/min 18.0 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min Max Cutting 500 ipm 500 ipm 500 ipm 500 ipm 500 ipm 500 ipm 360 ipm 360 ipm 360 ipm 12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min 9.1 m/min 9.1 m/min 9.1 m/min Capacity Standard 30+1 30+1 30+1 30+1 30+1 30+1 30+1 30+1 30+1 Tool Type / Taper CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 Max Tool Diameter Standard 4" / 7" 4" / 7" 4" / 10" 4" / 10" 4" / 10" 4" / 10" 4" / 10" 4" / 10" 4" / 10" (full / adjacent empty) 102 mm / 178 mm 102 mm / 178 mm 102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm Max Tool Weight 30 lb 30 lb 30 lb 30 lb 30 lb 30 lb 30 lb 30 lb 30 lb Tool Changer 13.6 kg 13.6 kg 13.6 kg 13.6 kg 13.6 kg 13.6 kg 13.6 kg 13.6 kg 13.6 kg Changer Type Standard SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC Tool to Tool (avg) 4.2 sec 4.2 sec 4.2 sec 4.2 sec 4.2 sec 4.2 sec 4.2 sec 4.2 sec 4.2 sec Chip to Chip (avg) 6.3 sec 6.3 sec 6.3 sec 6.3 sec 6.3 sec 6.3 sec 6.3 sec 6.3 sec 6.3 sec Positioning ±0.0002" ±0.0002" ±0.0003" 2 ±0.0003"2 ±0.0003"2 ±0.0003"2 ±0.0003"2 ±0.0003"2 ±0.0003"2 ±0.005 mm ±0.005 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm Accuracy Repeatability ±0.0001" ±0.0001" 2 ±0.0002" ±0.0002"2 ±0.0002"2 ±0.0002"2 ±0.0002"2 ±0.0002"2 ±0.0002"2 ±0.003 mm ±0.003 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm Machine Weight 15,900 lb 16,100 lb | 16,650 lb 22,500 lb 24,500 lb 25,500 lb 26,500 lb 29,500 lb 30,900 lb 32,150 lb 7212 kg 7303 kg | 7552 kg 10206 kg 11113 kg 11567 kg 12020 kg 13381 kg 14016 kg 14583 kg Air Required 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi Miscellaneous 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar Power Required (min) 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC C E R T I F I E D
44 | America’s Leading Machine Tool Maker 1) 5-minute rating. 2) Linear scales required to achieve accuracy listed. NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available. Specifications subject to change without notice. Not responsible for misprints or typographical errors. Haas Automation, Inc. 2800 Sturgis Road, Oxnard, California 93030 Toll Free: 800-331-6746 Fax: 805-278-8540 www.HaasCNC.com
Haas Automation, Europe Mercuriusstraat 28, B-1930 Zaventem, Belgium Tel: +32 2 522 99 05 Fax: +32 2 523 08 55
Haas Automation, Asia No. 96 Yi Wei Road, Building 67, Waigaoqiao FTZ, Shanghai 200131 P.R.C. Tel: +86 21 3861 6666 Fax: +86 21 3861 6799
Haas Automation, India Pvt Ltd Plot EL-35, TTC Industrial Area, Mahape MIDC, Navi Mumbai 400 709 TEL: +91-22-66098830, 31, 32, 33, 34 39.101038