1. Assemble all voting 2. Connect the voting 3. Unplug the power 4. Verify the seal on the machine booths. booths to power, connector and remove comm pack matches working from left to the last (or rightmost) the number on the right. machine from its booth, seal envelope. Cut and place it on a table. it and place it in the envelope.

5. Place the comm pack 6. Remove the GREEN 7. Verify the precinct 8. Follow the on-screen on the table next to the PEB from the comm name by selecting instructions. DO NOT voting machine. Plug in pack and insert it into YES. remove the GREEN the power cable, and the first machine. PEB until prompted to connect the printer do so. cable to the machine.

9. When prompted, press 10. Using the GREEN 11. When you reach 12. Press PRINT POLLING the VOTE button PEB, repeat steps 5 the machine on the LOCATION ZERO to exit. The voting through 7 to open all table, proceed as TAPES NOW. machine is now ready remaining machines, above, except, when for voters. except for the one that prompted, insert the you removed earlier. GREEN PEB to print a zero tape. 13. Turn the comm pack 14. Hold down the small 15. Press the PRINT button 16. If only one tape prints, selector to PRINTER, black button on the on the screen to print press YES to print as prompted on the printer until the green the zero tape. Two another. Otherwise, screen. light comes on. tapes should print. press NO.

17. When prompted, turn 18. Have at least two poll 19. Have at least two poll 20. Return the GREEN PEB off the comm pack by managers confirm managers sign the first to the comm pack. It turning the selector the public counts on zero tape and place it will not be used again switch to OFF. the tape read zero, in the comm pack. Post until the end of the and the protective the second tape for day. counts match the seal public viewing. envelope.

21. Disconnect the comm 22. Remove RED PEBs 23. Place the last voting 24. Congratulations! The pack’s power and from the comm pack. machine back in its polling place is now printer cables, and Place the pack in booth, and be sure to open for voting. place them inside the a secure area. Use reconnect the power pack. RED PEBs to activate cable. ballots, keeping them secure at all times.. Contact your county elections office or polling location technician if you encounter issues opening machines. 1. After all voters have 2. Insert the GREEN PEB 3. Repeat step two for 4. After closing the last cast their ballots, and select the CLOSE all voting machines, machine, disconnect collect all of the RED THE POLLS option. closing them from left the power connector, PEBs and store them Wait to remove the to right. and place the machine in the comm pack. GREEN PEB until on the table. prompted on screen.

5. Place the comm pack 6. Insert the GREEN PEB 7. When the display 8. Turn the comm pack on the table next to the into the machine on reads, PRINT TOTALS selector to PRINTER, voting machine. Plug in the table. NOW, select YES. as prompted on the the power cable, and screen. connect the printer cable to the machine.

9. Hold down the small 10. Following the prompts, 11. If only one tape prints, 12. Sign both tapes. Place black button on the press the PRINT button press YES to print one in the comm pack, printer until the green on the screen to print another. Otherwise, and the other on the light comes on. the totals tape. Two press NO. wall with the zero tape. tapes should print. 13. When prompted, turn 14. Remove the GREEN 15. Unplug the power 16. Cut the seal on the off the comm pack by PEB from the machine, connector from the flash card door, which turning the selector and secure it in the back of the first voting is located next to the switch to OFF. comm pack. machine, and remove power connector. the voting machine from its booth.

17. Slide the door open, 18. Return the voting 19. Close and disassemble 20. Secure each booth’s remove the flash card, machine to its booth. each voting booth. handle with a seal, and and place it in the record the seal number pouch provided. on the seal envelope.

21. Repeat steps 15 22. Ensure that all flash 23. Place a seal around the 24. Ensure the comm pack, through 20 for each cards, PEBs, and a copy handle, and record the voting machines, and voting machine. of the zero and totals seal number on the all other materials are tape are in the comm seal envelope. returned to election pack, and close it. central, following your county’s procedures. The closing process is now complete!