INDEX Wessels Product Brochure

INDEX

Wessels Product Brochure ...... 1-4 HVAC Expansion Tank: NLA Series ...... 5-6 Domestic Hot Water Expansion Tank: TXA Series ...... 7-8 Well Water & Pressure Booster Expansion Tank: FXA Series ..... 9-10 WessView Diaphragm Integrity Monitor ...... 11-12 Full Flow Expansion Tank ...... 13-14 WesPlate Heat Exchangers ...... 15-18 WesPac Brazed Plate Heat Exchanger ...... 19-20 WesTube Heat Exchangers ...... 21-24 WesFlo Filter Housings: ...... 25 CF Series ...... 26-27 BF Series ...... 28-29 HP Series ...... 30-31 HF Series ...... 32-33 4NCF Series ...... 34-35 4NBF Series ...... 36-37 GB Series ...... 38-39 TC Series ...... 40-41 Hydronic System Feaders GMP-6, GMP-18 ...... 42-43 Glycol Make-up Packages ...... 44-47 WessVent Air & Dirt Separator ...... 48-51 PSA Hydrualic Seperation Solutions PSA, PSAV ...... 52-54 Other Products by Wessels company ...... 55 Wessels Condensate Neutralizer ...... 56-57 Buffer Tanks ...... 58-61 Product Line Overview ...... 62 1-4 5-6 7-8 9-10 11-12 13-14 15-18 19-20 21-24 25 26-27 28-29 30-31 32-33 34-35 36-37 38-39 40-41 42-43 44-47 48-51 52-54 55 56-57 58-61 62

1 2 3 4 HVAC Expansion Tanks NLA Series

Wessels NLA series ASME Replaceable Bladder System with Smart Tank Add-On for Thermal Expansion Pressure Control

APPLICATIONS Closed-loop Non-Potable Hydronic Heating Wessels patented NLA vessels are ASME removable bladder type Hydronic Cooling pre-charged, expansion tanks. They are designed to absorb the Heat Transfer expansion volumes and control the pressure in heating/cooling systems. The system’s expanded water (fully compatible with Water water/glycol mixtures) is contained in a full acceptance heavy- Glycol duty butyl bladder that prevents tank corrosion and waterlogging problems. All NLA expansion tanks can be installed vertically or horizontally.

NEXT LEVEL INTELLIGENCE

• Pressure gauge integrated • WessView® bladder integrity monitor included • WessGuard® proximity sensor port adaptable • Easy-access air valve • Tamper-resistant secure guard mount • Designed and fabricated in accordance with ASME Boiler & Pressure vessel code • Products comply with NSF/ANSI Standard 61 • Replaceable heavy-duty butyl bladder (other materials available) • Standard design pressure is 125 psi (8.6 bar) • Available in carbon steel, 304 or 316L stainless steel • Factory pre-charged and field adjustable • Never waterlogs • Separation of water and air • Full flow design compatible • Higher pressure ratings available • Wessels Company Patented Design US 8,633,825 B2

5 NLA

< <

A D

< < D Lift Ring A < < <

< Guage < Guage <

< WessView® < < WessView® <

< E B < B

< < <

< CC < F < < FF NLA-85 thru NLA-800L

DIMENSIONS (in.) SYSTEM CONNECTION CHARGING VALVE MODEL MAX WORKING SHIPPING WEIGHT A B F G C D E PRESSURE (lbs)

NLA-35 12 23 1/2 - 3/4 NPT 0.302” - 32NC 10 - 125 40 NLA-50 14 24 - 3/4 NPT 0.302” - 32NC 10 - 125 50 NLA-85 16 37 1 NPT 3/4 NPT 0.302” - 32NC 12 5 1/2 125 90 NLA-130 20 37 1 NPT 3/4 NPT 0.302” - 32NC 16 5 1/2 125 125 NLA-200 24 43 1 1/2 NPT 3/4 NPT 0.302” - 32NC 20 5 1/4 125 210 NLA-300 24 55 1 1/2 NPT 3/4 NPT 0.302” - 32NC 20 5 1/4 125 225 NLA-400 30 49 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 125 300 NLA-500 30 57 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 125 335 NLA-600 30 65 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 125 360 NLA-800L 32 76 1 1/2 NPT 3/4 NPT 0.302” - 32NC 28 5 1/4 125 475

Note: • Tanks are factory pre-charged at 12 psi and field adjustable. • California code-sight glass is available upon request. • Both top and bottom connections (C and D) access the bladder. • Available with mounting clips.

TYPICAL SPECIFICATION Furnish and install, as shown on plans, a ______gallon ______” diameter X ______” (high) pre-charged steel expansion tank with heavy-duty butyl bladder. The tank shall have multiple water-side connections to promote full-flow to eliminate stagnate water within the tank, a 0.302”-32 charging valve connection (standard tire valve) to facilitate the on-site charging of the tank to meet system requirements, a pressure gauge, and WessView® bladder integrity monitor. The tank must contain a port for WessGuard® proximity sensor monitor. The tank must be constructed in accordance with most recent addendum of Section VIII Division 1 of the ASME Boiler and Pressure Vessel Code, and rated for 125 psig.

Each tank shall be Wessels model number NLA-______or approved equal.

UPGRADE TO SMART WESSGUARD® TANK PROTECTION Wessels Type NLA-WG Smart Tanks are ASME removable bladder type pre-charged, expansion tanks, with patented WessGuard® bladder monitor. They are designed to absorb the expansion forces and control the pressure in heating/cooling systems and come equipped with a uniquely designed capacitive sensor that is sensitive to any movement inside the tank.

The system’s expanded water (fully compatible with water/glycol mixtures) is contained in a heavy- duty bladder preventing tank corrosion and waterlogging problems. If the bladder extends beyond the normal movement, WessGuard® monitor will activate an audible LED alarm and energy management system to notify maintenance staff of a potential system issue. 101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 6 Domestic Hot water Expansion Tanks TXA Series

Wessels TXA series ASME Replaceable Bladder System with Smart Tank Add-On for Thermal Expansion Pressure Control

APPLICATIONS Open-System Potable Water Heating Wessels patented TXA tanks are ASME replaceable bladder type Fresh Hot Water pre-charged thermal expansion tanks for commercial and industrial R/O Water potable hot water applications. They are designed to be installed between a backflow preventer and a water heater, so it can accept the expanded volume of hot water generated during heating and keep the system pressure below the relief valve setting. The water is contained in a butyl bladder. All other welted parts are stainless steel. All TXA expansion tanks can be installed vertically or horizontally.

NEXT LEVEL INTELLIGENCE

• Pressure gauge integrated • WessView® bladder integrity monitor included • WessGuard® proximity sensor port adaptable • Easy-access air valve • Tamper-resistant secure guard mount • Designed and fabricated in accordance with ASME Boiler & Pressure vessel code • Products comply with NSF/ANSI Standard 61 • Replaceable heavy-duty butyl bladder (other materials available) • Standard design pressure is 150 psi (10 bar) • Available in carbon steel, 304 or 316L stainless steel • Factory pre-charged and field adjustable • Never waterlogs • Separation of water and air • Full flow design compatible • Higher pressure ratings available • Wessels Company Patented Design US 8,633,825 B2

7 TXA

< <

A D

< < D Lift Ring A < < <

< Guage < Guage <

< WessView® < < WessView® <

< E B < B

< < <

< CC < F < < FF TXA-85 thru TXA-800L

DIMENSIONS (in.) SYSTEM CONNECTION CHARGING VALVE MODEL MAX WORKING SHIPPING WEIGHT A B F G C D E PRESSURE (lbs)

TXA-35 12 23 1/2 - 3/4 NPT 0.302” - 32NC 10 - 150 40 TXA-50 14 24 - 3/4 NPT 0.302” - 32NC 10 - 150 50 TXA-85 16 37 1 NPT 3/4 NPT 0.302” - 32NC 12 5 1/2 150 90 TXA-130 20 37 1 NPT 3/4 NPT 0.302” - 32NC 16 5 1/2 150 125 TXA-200 24 43 1 1/2 NPT 3/4 NPT 0.302” - 32NC 20 5 1/4 150 210 TXA-300 24 55 1 1/2 NPT 3/4 NPT 0.302” - 32NC 20 5 1/4 150 225 TXA-400 30 49 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 150 300 TXA-500 30 57 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 150 335 TXA-600 30 65 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 150 360 TXA-800L 32 76 1 1/2 NPT 3/4 NPT 0.302” - 32NC 28 5 1/4 150 475

Note: • Tanks are factory pre-charged at 40 psi and field adjustable. • California code-sight glass is available upon request. • Both top and bottom connections (C and D) access the bladder. • Available with mounting clips.

TYPICAL SPECIFICATION Furnish and install, as shown on plans, a ______gallon ______” diameter X ______” (high) pre- charged steel thermal expansion tank with heavy-duty butyl bladder. The tank shall have multiple water-side connections to promote full-flow to eliminate stagnate water within the tank, a 0.302”-32 charging valve connection (standard tire valve) to facilitate the on-site charging of the tank to meet system requirements, a pressure gauge, and WessView® bladder integrity monitor. The tank must contain a port for WessGuard® proximity sensor monitor. The tank must be constructed in accordance with most recent addendum of Section VIII Division 1 of the ASME Boiler and Pressure Vessel Code, and rated for 150 psig.

Each tank shall be Wessels model number TXA-______or approved equal.

UPGRADE TO SMART WESSGUARD® TANK PROTECTION Wessels Type TXA-WG Smart Tanks are ASME removable bladder type pre-charged, thermal expansion tanks, with patented WessGuard® bladder monitor. They are designed to absorb the expansion forces and control the pressure in heating/cooling systems and come equipped with a uniquely designed capacitive sensor that is sensitive to any movement inside the tank.

Wessels FXA series ASME Replaceable Hydropneumatic Bladder System with Smart Tank Add-On for Booster Expansion Pressure Control

APPLICATIONS Open-loop Potable Pressure Booster Wessels patented FXA Tanks are ASME replaceable bladder type Well Water pre-charged hydro-pneumatic tanks for commercial and industrial Water well and water systems, booster systems, or other non-heated potable water applications. They are designed to deliver water under pressure between pump cycles to provide sufficient flow to meet demands. The water is contained in a butyl bladder. All FXA tanks can be installed vertically or horizontally.

NEXT LEVEL INTELLIGENCE

FXA Well Water & Pressure Booster Expansion Tanks < <

A D

< < D Lift Ring A < < <

< Guage < Guage <

< WessView® < < WessView® <

< E B < B

< < <

< CC < F < < FF FXA-85 thru FXA-800L

DIMENSIONS (in.) SYSTEM CONNECTION CHARGING VALVE MODEL MAX WORKING SHIPPING WEIGHT A B F G C D E PRESSURE (lbs)

FXA-35 12 23 1/2 - 3/4 NPT 0.302” - 32NC 10 - 125 40 FXA-50 14 24 - 3/4 NPT 0.302” - 32NC 10 - 125 50 FXA-85 16 37 1 NPT 3/4 NPT 0.302” - 32NC 12 5 1/2 125 90 FXA-130 20 37 1 NPT 3/4 NPT 0.302” - 32NC 16 5 1/2 125 125 FXA-200 24 43 1 1/2 NPT 3/4 NPT 0.302” - 32NC 20 5 1/4 125 210 FXA-300 24 55 1 1/2 NPT 3/4 NPT 0.302” - 32NC 20 5 1/4 125 225 FXA-400 30 49 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 125 300 FXA-500 30 57 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 125 335 FXA-600 30 65 1 1/2 NPT 3/4 NPT 0.302” - 32NC 24 5 1/4 125 360 FXA-800L 32 76 1 1/2 NPT 3/4 NPT 0.302” - 32NC 28 5 1/4 125 475

TYPICAL SPECIFICATION Furnish and install, as shown on plans, a ______gallon ______” diameter X ______” (high) pre-charged steel hydropneumatic pressure tank with heavy-duty butyl bladder. The tank shall have multiple water-side connections to promote full-flow to eliminate stagnate water within the tank, a 0.302”-32 charging valve connection (standard tire valve) to facilitate the on-site charging of the tank to meet system requirements, a pressure gauge, and WessView® bladder integrity monitor. The tank must contain a port for WessGuard® proximity sensor monitor. The tank must be constructed in accordance with most recent addendum of Section VIII Division 1 of the ASME Boiler and Pressure Vessel Code, and rated for 125 psig.

Each tank shall be Wessels model number FXA-______or approved equal.

UPGRADE TO SMART WESSGUARD® TANK PROTECTION Wessels Type FXA-WG Smart Tanks are ASME removable bladder type pre-charged, hydropneumatic expansion tanks, with patented WessGuard® bladder monitor. They are designed to absorb the expansion forces and control the pressure in heating/cooling systems and come equipped with a uniquely designed capacitive sensor that is sensitive to any movement inside the tank.

The Industry’s First Diaphragm Integrity Monitor

Models NTA, TTA, FXT 11 Introducing

Diaphragm Integrity Monitor Ready for the first innovation in diaphragm expansion tank technology in over 50 years? Wessels Company is proud to introduce the WessView monitor featuring exclusive, patented technology for maintenance troubleshooting of any diaphragm tank. This simple device allows for fast, accurate assessment of the expansion tank’s integrity by changing color from white to red in the case of a compromised internal diaphragm. Specially designed sensor turns red when internals compromised

A QR code affixed next to the device will direct maintenance personnel to a specialized troubleshooting web-link and the product’s distributor.

AVAILABLE on Diaphragm Tanks The NTA Series HVAC Expansion Tanks are manufactured to ASME specifications. These vessels are designed using a heavy-duty fixed butyl diaphragm and are offered in sizes ranging from 8 to 211 gallons. The TTA Series Thermal Expansion Tanks are manufactured to ASME specifications. These vessels are designed using a heavy- duty fixed butyl diaphragm and are offered in sizes ranging from 3 to 90 gallons. The FXT Series Hydro-pneumatic Tanks are manufactured to ASME specifications. These vessels are designed using a heavy-duty fixed butyl diaphragm and are offered in sizes ranging from 8 to 210 gallons.

12WESSELS Company • 101 Tank Street, Greenwood, IN 46143 • phone 317 | 888.9800 fax 317 | 888.9988 • www.westank.com 13 14 15 16 17 18 19 20 21 22 23 24 ® WesFlo Filter Housings

ASME / NON-ASME

CARTRIDGE FILTER / BAG FILTER HIGH PRESSURE / HIGH FLOW FILTRATION VESSELS

h Water S Oil P Air * Gas v Chemical 4 Pulp T Coolant # Paint / Ink ~ Electronics

25 WesFlo® Filter Housings WesFlo Filter Housings CF SERIES

WesFlo® CF Series ASME (U or UM) Single and Multi-round Cartridge Filter Vessels Accommodate High Flow Rates & High Particulate Retention

APPLICATIONS Water Potable Liquids Oil (petroleum, hydraulic, etc.) ® Lubricants WesFlo single and multi-cartridge filter vessels meet a broad range of liquid and gas applications. Designed to handle flow Concentrated Alkalis rates of up to 2,040 gpm (7,722 lpm), the WesFlo® CF Series Dilute Acids & Alkalis cartridge filter vessels accommodates double open-end (DOE) Mineral Acids and single open-end (SOE) cartridges in lengths of 10 in., 20 in., 30 in. and 40 in. All aspects of design, materials, construction Organic Acids and workmanship of the CF Vessel Series conform to ASME code. Oxidizing Agents (Also available in non-ASME code design and construction.) Chemicals Solvents BENEFITS Inks/Paints/Coatings • Designed and fabricated in accordance with ASME Boiler & Pressure vessel code (U or UM stamp) Pulp & Paper • Non-code design and construction available (parallel to code standards) • Standard design pressure is 150 psi (10.3 bar) and 300 psi (20.7 bar). Industrial Higher design pressures available • Available in carbon steel, 304 stainless steel or 316L stainless steel • Single O-ring seal closure design assures quick, positive cover seal • Swing bolts for easy closure • Buna-N standard O-ring with optional Viton®, Neoprene, EPDM and Fluoropolymer elastomers available • Mechanical cover lift of carbon construction on models CF12 thru CF52, hydraulic cover lift of carbon steel construction on models CF85 and CF102 (available on all models as option) • Designed for minimum pressure drop • Dual purpose cartridge seats for use with double open-end (DOE) and single open-end (SOE) / 2-222 O-ring filter cartridges • Other materials available

26 CF

MAX DESIGN TEMPS

CARBON STEEL 500°F (260°C) 304 SST 300°F (150°C) 316 SST 400°F (204°C) GASKET 250°F (121°C)

CLOSURE O-RING GUIDE

MATERIAL MAX TEMP

NITRILE (BUNA-N)** 250°F (121°C) EPDM (EPR) 300°F (149°C) FKM (VITON®) 400°F (204°C)

**NITRILE O-ring is standard

Note: Wessels also offers non- code cartridge filter vessels. For more information, please CF3, CF6 CF12, CF19 CF25 & ABOVE refer to the 4NCF datasheet.

DIMENSIONS (in.) MAXIMUM (NO.) & CARTRIDGE SHIPPING MODEL FLOW * LENGTH (in.) B C D E F G H J WEIGHT (gpm) A** (lbs) CF3-1-2F (3) 10 15 26.69 12.69 6.63 O.D. 8.19 16.19 5.00 11.31 5.81 2 125 CF6-1-2F (6) 10 30 26.94 14.88 8.63 O.D. 8.19 16.19 5.06 11.31 7.81 2 180 CF6-2-2F (6) 20 60 37.00 14.88 8.63 O.D. 8.19 16.19 5.06 11.31 7.81 2 185 CF6-3-2F (6) 30 90 47.06 14.88 8.63 O.D. 8.19 16.19 5.06 11.31 7.81 2 200 CF6-4-2F (6) 40 120 58.50 14.88 8.63 O.D. 8.19 16.19 5.06 11.31 7.81 3 220 CF12-3-3F (12) 30 180 53.75 20.50 12.06 I.D. 13.38 21.00 5.00 12.00 11.68 3 310 CF12-3-4F (12) 30 180 53.75 20.50 12.06 I.D. 13.38 21.00 5.00 17.88 11.68 4 315 CF12-4-4F (12) 40 240 60.31 20.50 12.06 I.D. 13.38 21.00 5.00 17.88 11.68 4 330 CF19-3-4F (19) 30 285 50.19 23.50 15.06 I.D. 13.38 21.00 5.00 17.88 14.75 4 420 CF19-4-4F (19) 40 380 60.31 23.50 15.06 I.D. 13.38 21.00 5.00 17.88 14.75 4 440 CF25-3-4F (25) 30 375 55.88 26.00 18.06 I.D. 15.50 28.00 5.00 20.44 17.76 4 515 CF25-4-6F (25) 40 500 69.75 26.00 18.06 I.D. 16.50 31.00 5.00 22.25 17.76 6 540 CF35-3-4F (35) 30 525 58.19 29.25 20.06 I.D. 16.50 31.00 5.00 22.56 19.77 4 640 CF35-3-6F (35) 30 525 58.19 29.25 20.06 I.D. 16.50 31.00 5.00 22.56 19.77 6 645 CF35-4-6F (35) 40 700 68.25 29.25 20.06 I.D. 16.50 31.00 5.00 22.56 19.77 6 695 CF40-3-6F (40) 30 600 60.25 30.75 22.06 I.D. 18.00 32.00 5.00 23.31 21.70 6 810 CF52-3-4F (52) 30 780 63.69 33.38 24.06 I.D. 20.50 34.00 5.00 27.56 23.72 4 855 CF52-3-6F (52) 30 780 63.69 33.38 24.06 I.D. 20.50 34.00 5.00 27.56 23.72 6 865 CF52-4-8F (52) 40 1040 73.69 33.38 24.06 I.D. 20.50 34.00 5.00 27.56 23.72 6 900 CF85-3-8F (85) 30 1275 67.25 39.75 30.06 I.D. 24.00 40.00 6.00 31.50 29.81 8 1170 CF84-4-8F (85) 40 1700 73.63 39.75 30.06 I.D. 24.00 40.00 6.00 31.50 29.81 8 1200 CF102-3-8F (102) 30 1530 68.63 42.25 32.06 I.D. 23.63 41.25 6.00 31.69 31.81 8 1450 CF102-4-8F (102) 40 2040 79.94 42.25 32.06 I.D. 23.63 41.25 6.00 31.90 31.81 8 1600 *Actual flow rate is dependent on fluid viscosity, micron rating, contaminant and media type. Consult flow charts for each application. **Add 5 in. to this dimension for hydraulic cover lift ORDERING INFORMATION CF - -

# OF MATERIAL DESIGN SERIES FILTER SERIES CARTRIDGE LENGTH INLET / OUTLET CONNECTION TYPE COVER LIFT COLUMNS OMIT CARBON STEEL OMIT ASME / 150 psi 1 CARTRIDGE 3 1 10 in. 2 2 in. ANSI F ANSI SORF OMIT NO COVER LIFT 4 304 SST H ASME / 300 psi CF OR MULTIPLE 6 2 20 in. 3 3 in. ANSI OMIT NPT K1 MECHANICAL CARTRIDGES 6 316 SST N Non-ASME 12 3 30 in. 4 4 in. ANSI K2 HYDRAULIC 19 4 40 in. 6 6 in. ANSI 25 8 8 in. ANSI 35 40 52 85 101 Tank Street Greenwood, IN 46143 102 P: 317-888-9800 F: 317-865-7411 www.westank.com 27 WesFlo® Filter Housings WesFlo Filter Housings BF SERIES

WesFlo® BF Series ASME (U or UM) Single and Multi-round Bag Vessels Accommodate High Flow Rates & High Particulate Retention

APPLICATIONS Water Food & Beverage Oil Cutting Oils Lubricants Chemicals Designed to handle flow rates of up to 1,120 gpm (4,240 lpm), the Solvents WesFlo® BF Series bag and strainer filter vessels provide excellent Electronics filtration in a wide range of industrial and chemical applications. All aspects of design, materials, construction and workmanship Inks/Paints/Coatings of the BF Vessel Series conform to ASME code. (Also available in Pulp & Paper non-ASME code design and construction.)

BENEFITS

• Accepts standard #1 and #2 size bag filters • Built in accordance with ASME (U or UM stamp) Boiler and Pressure vessel code • Non-code design and construction (parallel code standards) • Standard design pressure is 150 psi (10.3 bar) or 300 psi (20.7 bar) • Available in carbon steel, 304 or 316L stainless steel • Single O-ring seal closure design assures quick, positive cover seal • Swing bolts with hex nuts for easy closure • Buna-N standard O-ring with optional Viton®, Neoprene, EPDM and fluoropolymer elastomers available • Positive bag media seal prior to sealing vessel • Stainless steel perforated basket • Other materials available

28 BF

MAX DESIGN TEMPS

CARBON STEEL 500°F (260°C) 304 SST 300°F (150°C) 316 SST 400°F (204°C) GASKET 250°F (121°C)

CLOSURE O-RING GUIDE

MATERIAL MAX TEMP

NITRILE (BUNA-N)** 250°F (121°C) EPDM (EPR) 300°F (149°C) FKM (VITON®) 400°F (204°C)

**NITRILE O-ring is standard

Note: Wessels also offers non- code bag filter vessels. For more information, please refer to the 4NBF datasheet.

BF11, BF12 BF25 & ABOVE

DIMENSIONS (in.) MAXIMUM FLOW SHIPPING MODEL * (gpm) A B C D E F G H J WEIGHT (lbs) BF11-2 80 34.88 30.69 26.75 10.75 8.63 7.31 10.75 7.81 2.00 180 BF11-2F 80 34.88 30.69 26.75 10.75 8.63 7.31 14.88 7.81 2.00 180 BF12-2 160 47.88 43.69 39.75 10.75 8.63 7.31 10.75 7.81 2.00 200 BF12-2F 160 47.88 43.69 39.75 10.75 8.63 7.31 14.88 7.81 2.00 200 BF12-3F 160 48.81 44.63 40.00 10.75 8.63 7.31 16.00 7.81 2.00 220 BF31-3FK1 240 43.00 38.25 32.00 17.00 18.44 6.00 26.00 17.75 3.00 600 BF32-4FK1 480 56.00 51.25 45.00 17.00 18.44 6.00 26.00 17.75 4.00 650 BF41-4FK1 320 43.50 38.63 32.00 17.00 20.44 6.00 28.00 19.79 4.00 670 BF42-4FK1 640 56.50 51.63 45.00 17.00 20.44 6.00 28.00 19.79 4.00 720 BF42-6FK1 640 60.19 55.13 47.00 18.00 20.44 6.00 30.00 19.79 6.00 740 BF52-6FK1 800 60.50 54.50 45.00 20.00 22.44 6.00 30.00 21.71 6.00 700 BF62-8FK1 960 64.00 58.00 48.00 22.00 26.00 5.00 36.00 25.30 8.00 1105 BF72-6FK1 1120 59.75 53.75 45.00 20.00 26.00 5.00 34.00 25.30 6.00 1070 BF72-8FK1 1120 64.00 58.00 48.00 22.00 26.00 5.00 36.00 25.30 8.00 1105 BF82-8FK1 1440 64.56 58.00 48.00 23.25 28.44 5.00 38.00 27.88 8.00 1180 BF92-8FK1 1440 66.75 60.00 50.00 24.00 30.56 6.00 40.00 29.80 8.00 1180

*Actual flow rate is dependent on fluid viscosity, micron rating, contaminant and media type. Consult flow charts for each application.

ORDERING INFORMATION

BF - -

# OF MATERIAL DESIGN SERIES BAG FILTER SERIES BAG LENGTH INLET / OUTLET CONNECTION TYPE COVER LIFT COLUMNS OMIT CARBON STEEL OMIT ASME / 150 psig 1 1 16.5 in. 2 2 in. OMIT NPT OMIT NO COVER LIFT 1 BAG OR BF 4 304 SST H ASME / 300 psig MULTIPLE BAGS 3 2 32 in. 3 3 in. F ANSI SORF K1 MECHANICAL 6 316 SST N Non-ASME 4 4 4 in. K2 HYDRAULIC 5 6 6 in. 6 8 8 in. 7 8 9

101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 29 WesFlo® Filter Housings WesFlo Filter Housings HP SERIES

WesFlo® HP Series ASME (U or UM) Filter Vessels for High Pressure Industrial and Chemical Process Applications

APPLICATIONS Cutting Oils Lubricants Chemicals Solvents Process Water Coolants WesFlo® HP Series cartridge filter vessels are designed to deliver Hydraulic Oils excellent filtration in high pressure applications up to 1610 psi, all aspects of design, materials, construction and workmanship Compressed Air & Gases of the HP Vessel Series conform to ASME code. (Also available in Other High Pressure Liquids non-ASME code design and construction.) Catalyst Recovery BENEFITS

• T-Style head and shell for ease of installation and servicing • Non-code design and construction (parallel code standards) available • Built in accordance with ASME (U or UN stamp) boiler and pressure vessel code • Maximum design pressure is 1610 psi at 300°F. Higher temperature ratings available • 1 in. connections for maximum flow capability of filter cartridges • Available in carbon steel or 316L stainless steel • Multiple bolt closure with bright zinc plated studs • Buna-N standard O-ring with optional Viton®, Neoprene, EPDM and elastomers available • Rigid cartridge support post with threaded end seal for positive double open end (DOE) cartridge seating • Other materials available

30 HP

MAX DESIGN TEMPS

CARBON STEEL 500°F (260°C) 304 SST 300°F (150°C) 316 SST 400°F (204°C) GASKET 250°F (121°C)

CLOSURE O-RING GUIDE

MATERIAL MAX TEMP

NITRILE (BUNA-N)** 250°F (121°C) EPDM (EPR) 300°F (149°C) FKM (VITON®) 400°F (204°C)

**NITRILE O-ring is standard

DIMENSIONS (in.) PRESSURE RATING CONNECTION CARTRIDGE SHIPPING MODEL * (psi) SIZE (in.) LENGTH (in.) A B C D** MAX GPM WEIGHT (lbs) HP-11-1 1610 1-NPT 10 14.5 3.5 4.6 22 6 37 HP-1-150 245 1-FLG-150# 10 14.5 3.5 12.6 22 6 45 HP-11-1-300 665 1-FLG-300# 10 14.5 3.5 12.6 22 6 47 HP-11-1-600 1332 1-FLG-600# 10 14.5 3.5 12.6 22 6 47 HP-12-1 1610 1-NPT 20 24.5 3.5 4.6 42 12 46 HP-12-1-150 245 1-FLG-150# 20 24.5 3.5 12.6 42 12 54 HP-12-1-300 665 1-FLG-300# 20 24.5 3.5 12.6 42 12 56 HP-12-1-600 1332 1-FLG-600# 20 24.5 3.5 12.6 42 12 56 HP-13-1 1610 1-NPT 30 34.5 3.5 4.6 62 18 55 HP-13-1-150 245 1-FLG-150# 30 34.5 3.5 12.6 62 18 63 HP-13-1-300 665 1-FLG-300# 30 34.5 3.5 12.6 62 18 65 HP-13-1-600 1332 1-FLG-600# 30 34.5 3.5 12.6 62 18 65

*Actual flow rate is dependent on fluid viscosity, micron rating, contaminant and media type. Consult flow charts for each application. **Add 3 in. when using TC internal option for use with TC style 2-222 O-ring cartridges.

Note: NPT maximum pressure is 1610 psi at 300°F with EPR O-ring, 400°F with Viton® and FEP encapsulated Viton® O-ring and 500°F with FEP encapsulated silicone. Flanged units are based on ANSI B16.5 pressure at 250°F

ORDERING INFORMATION

HP 1 - - 1 -

MATERIAL DESIGN SERIES HIGH PRESSURE SERIES CARTRIDGE QTY LENGTH INLET / OUTLET CONNECTION TYPE INTERNAL OPTION

OMIT CARBON STEEL OMIT ASME U-STAMP 1 1 10 in. 1 1 in. ANSI OMIT FNPT OMIT CENTER POST FOR DOE 6 316 SST N NON-CODE HP 1 CARTRIDGE 2 20 in. 150 150# FLANGE 222 222 O-RING ADAPTER 3 30 in. 300 300# FLANGE 600 600# FLANGE

Note: Buna-N O-ring standard. Other gasket material available.

101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 31 WesFlo® Filter Housings WesFlo Filter Housings HF SERIES

WesFlo® HF Series ASME (U or UM) Larger Diameter Cartridge Filter Vessels for Higher Flow Rates and High Particulate Retention

APPLICATIONS Cutting Oils Lubricants Chemicals Solvents ® Process Water WesFlo HF Series vessels are designed to utilize cartridges for high flows of up to 500 gpm (1892 lpm) per 60 in. length. They provide Coolants significant size and cost reduction compared to conventional size filter Edible Oils cartridges. The horizontal design and coreless cartridge configuration Potable Water makes cartridge change fast and easy. Vessels accommodate high flow cartridges in lengths of 20 in., 40 in. or 60 in. All aspects of design, Reverse Osmosis Filtration materials, construction and workmanship of the HF Vessel Series conform to ASME code. (Also available in non-ASME code design and construction.)

BENEFITS

• Horizontal design makes cartridge change easier and quicker without need for elevated platform. Vertical orientation is also available • Large diameter cartridge yields high flow rate per cartridge resulting in fewer cartridges and smaller, lower cost vessels • Inside-out flow direction captures contaminates on the inside of the filter to make cartridge change easier • Available in carbon steel, 304 stainless steel or 316L stainless steel • Built in accordance with ASME (U or UN stamp) boiler and pressure vessel code • Non-code design and construction (parallel code standards) available • Standard design pressure is 150 psi (10.3 bar) or 300 psi (20.7 bar). Higher design pressures available • Other materials available

32 HF < < MAX DESIGN TEMPS

CARBON STEEL 500°F (260°C) 304 SST 300°F (150°C) < 316 SST 400°F (204°C) GASKET 250°F (121°C) <

C A CLOSURE O-RING GUIDE B C MATERIAL MAX TEMP < NITRILE (BUNA-N)** 250°F (121°C) EPDM (EPR) 300°F (149°C)

------< FKM (VITON®) 400°F (204°C)

< B < **NITRILE O-ring is standard < <

< A < HFV HFH

DIMENSIONS (in.) OPTIMAL MAXIMUM FLOW* CONNECTION CARTRIDGE MODEL CARTRIDGE QTY INLET/OUTLET SHIPPING WEIGHT (gpm) SIZE (in.) LENGTH (in.) A B C SIZE (lbs)

HFH14-3 350 3-FLG 1 40 3 8 60.2 43 250 HFH34-6 1050 6-FLG 3 40 6 16 69.8 58.4 694 HFH54-8 1750 8-FLG 5 40 8 20 77 59 935 HFH74-10 2450 10-FLG 7 40 10 22 79.7 60 1106 HFH84-10 2800 10-FLG 8 40 10 24 79.7 61 1248 HFH124-12 4200 12-FLG 12 40 12 30 88.4 64 1672 HFH154-14 5250 14-FLG 15 40 14 32 90.8 65 1938 HFH194-16 6650 16-FLG 19 40 16 36 94.5 67.5 2593 HFH16-4 500 4-FLG 1 60 4 8 81.3 43 325 HFH36-8 1500 8-FLG 3 60 8 16 91.8 58.4 756 HFH56-10 2500 10-FLG 5 60 10 20 99 59 1070 HFH76-10 3500 10-FLG 7 60 10 22 99.7 60 1181 HFH86-12 4000 12-FLG 8 60 12 24 101.9 61 1389 HFH126-14 6000 14-FLG 12 60 14 30 109.7 64 1834 HFH156-16 7500 16-FLG 15 60 16 32 112.9 65 2113 HFH196-18 9500 18-FLG 19 60 18 36 116.5 67.5 2828 HFV14-3 350 3-FLG 1 40 3 8 65.5 69.4 250 HFV34-6 1500 6-FLG 3 40 6 16 81.9 94.25 694 HFV54-8 1750 8-FLG 5 40 8 20 90 106.25 935 HFV74-10 2450 10-FLG 7 40 10 22 98.8 115.25 1106 HFV84-10 2800 10-FLG 8 40 10 24 98.8 115.5 1248 HFV124-12 4200 12-FLG 12 40 12 30 110.25 129 1672 HFV154-14 5250 14-FLG 15 40 14 32 115.8 135 1938 HFV194-16 6650 16-FLG 19 40 16 36 123.5 143.6 2593 *Actual flow rate is dependent on fluid viscosity, micron rating, contaminant and media type. Consult flow charts for each application. ORDERING INFORMATION

HF -

MATERIAL HIGH FLOW SERIES VESSEL ORIENTATION CARTRIDGE QTY CARTRIDGE LENGTH INLET / OUTLET CONNECTION TYPE FINISH

OMIT CARBON STEEL H HORIZONTAL 1 1 4 40 in. 3 3 in. ANSI F 150# FLANGE PAINTED; STANDARD 1 CARTRIDGE OMIT ON CARBON 4 304 SST HF OR MULTIPLE V VERTICAL 3 3 6 60 in. 6 6 in. ANSI H 300# FLANGE CARTRIDGES GLASS BEAD BLAST; STANDARD 6 316 SST 5 5 8 8 in. ANSI OMIT ON STAINLESS STEEL 7 7 10 10 in. ANSI 8 8 12 12 in. ANSI P* PASSIVATED 12 12 14 14 in. ANSI *P valid for stainless design only. 15 15 16 16 in. ANSI 19 19 18 18 in. ANSI

101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 33 WesFlo® Filter Housings WesFlo Filter Housings 4NCF SERIES

WesFlo® 4NCF Series Multi-Cartridge Filter Vessels 304 Stainless Steel Non-ASME code design

APPLICATIONS Water Potable Water

Process Water The WesFlo® 4NCF non-code, multi-cartridge filter vessels provide an Lubricants economically efficient means of filtration for a wide variety of liquid applications. With a lightweight, externally polished stainless steel design, these vessels also Solvents include a swing bolt closure and internal positive pressure cartridge alignment Coolants and sealing plates. Edible Oils The 4NCF vessels accommodate double open-end (DOE) and single open-end Cutting Oils (SOE) filter cartridges in lengths of 10 in., 20 in., 30 in. or 40 in. These vessels Coatings are manufactured from polished and passivated 304 stainless steel and rated for 150 psi (10.3 bar). All hardware is stainless steel for additional corrosion resistance.

BENEFITS

• Non-ASME code design • Maximum operating pressure is 150 psi at 300°F • Convertible design allows for use of both double open-end (DOE) and single open-end (SOE) filter cartridges • Single O-ring seal closure design assures quick, positive cover seal • Swing bolts with eye nuts for fast, easy access • Available with NPT or ANSI B16.5 flanged connections • EPDM seals are offered as standard with other seal materials available • Standard NPT vents and drains • Standard stainless steel cartridge support and sealing hardware • Interior and exterior surfaces are pickled/passivated for enhanced corrosion allowance • Exterior surfaces are polished for aesthetic purposes • Designed for minimum pressure drop

34 4NCF

TYPICAL AQUEOUS FLOW* CARTRIDGE CONFIGURATIONS

FLAT MODEL CARTRIDGE QTY CAPACITY (gpm) PP SPRING CLOSED END 222 O-RING SOE 4NCF5-1-2 5 x 10” 25 FLEX FIN 4NCF5-2-2 5 x 20” 50 FIN 4NCF5-3-2 5 x 30” 75 GASKET SOE PP SPRING CLOSED END 4NCF5-4-2 5 x 40” 100 DOE STANDARD 4NCF7-3-2 7 x 30” 105 4NCF7-4-2 7 x 40” 140 4NCF11-3-3F 11 x 30” 165 4NCF11-4-3F 11 x 40” 220

4NCF19-3-4F 19 x 30” 285 CLOSURE O-RING GUIDE 4NCF19-4-4F 19 x 40” 380 MATERIAL MAX TEMP *Flow based on 5 gpm water per 10 in. length NITRILE (BUNA-N) 250°F (121°C) EPDM (EPR)** 300°F (149°C) FKM (VITON®) 400°F (204°C)

MATERIAL OF MAX. ALLOWABLE MAX. ALLOWABLE **EPDM is standard CONSTRUCTION PRESSURE (MAP) TEMP. (MAT)

304 SST 150 psi (10.3 bar) 300°F (149°C)

DIMENSIONS (in.) SHIPPING WEIGHT MODEL A B C D E F G H (lbs)

4NCF5-1-2 9.85 15.75 8.00 29.33 26.00 6.00 12.00 12.40 180 4NCF5-2-2 9.85 19.69 8.00 39.17 35.84 6.00 12.00 12.40 180 4NCF5-3-2 9.85 23.63 8.00 49.00 45.67 6.00 12.00 12.40 200 4NCF5-4-2 9.85 27.56 8.00 59.25 55.91 6.00 12.00 12.40 200 4NCF7-3-2 11.81 27.56 10.00 51.77 47.64 7.00 14.00 14.57 650 4NCF7-4-2 11.81 31.50 10.00 62.00 57.87 7.00 14.00 14.57 670 4NCF11-3-3F 14.17 27.56 12.00 55.71 50.79 9.14 18.27 16.54 720 4NCF11-4-3F 14.17 35.43 12.00 65.16 60.24 9.14 18.27 16.54 740 4NCF19-3-4F 15.75 31.50 15.91 58.47 52.56 11.90 23.79 23.79 700 4NCF19-4-4F 15.75 35.43 15.91 67.52 61.61 11.90 23.79 23.79 1105

ORDERING INFORMATION

4 N CF -

CARTRIDGE CARTRIDGE LENGTH MATERIAL RATING SERIES INLET / OUTLET QTY. 10 in. 20 in. 30 in. 40 in. N Non-ASME 4 304 SST CARTRIDGE 5 1 2 3 4 2 2 in. NPT CF FILTER 7 1 2 3 4 2 2 in. NPT 11 -- 3 4 3F 3 in. ANSI 19 -- 3 4 4F 4 in. ANSI

101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 35 WesFlo® Filter Housings WesFlo Filter Housings 4NBF SERIES

WesFlo® 4NBF Series Single & Multi-Bag Filter Vessels 304 Stainless Steel Non-ASME code design

APPLICATIONS Water Cutting Oils Lubricants

® Solvents The WesFlo 4NBF non-code single and multi-bag filter vessels provide an economically efficient means of filtration for a wide variety of liquid Process Water applications. With a lightweight, externally polished stainless steel design, Coolants these vessels also include a swing bolt (quick opening) closure and an Coatings internal positive pressure bag hold down device. Potable Water The 4NBF vessels are designed to accommodate common industrial filter bag sizes 1, 2, 3 and 4. These vessels are manufactured from polished and passivated 304 stainless steel and rated for 150 psi (10.3 bar). All hardware is stainless steel for additional corrosion resistance.

BENEFITS

• Non-ASME code design • Maximum operating pressure is 150 psi at 300°F • Single O-ring seal closure design assures quick, positive cover seal • Swing bolts with eye nuts for easy access • Stainless steel closure hardware • Available with NPT or ANSI B16.5 flanged connections • NPT models can be interchanged between a side-in/side-out or side-in/ bottom-out configuration • Standard NPT vents and drains • EPDM seals are offered as standard with other seal materials available • Standard stainless steel filter bag support basket • Interior and exterior surfaces are pickled / passivated for enhanced corrosion allowance • Exterior surfaces are polished for aesthetic purposes • Designed for minimum pressure drop 36 4NBF

MAX DESIGN TEMPS

304 SST 300°F (150°C)

CLOSURE O-RING GUIDE

MATERIAL MAX TEMP

NITRILE (BUNA-N) 250°F (121°C) EPDM (EPR)** 300°F (149°C) FKM (VITON®) 400°F (204°C)

**EPDM O-ring is standard

BAG DIMENSIONS (in.) VESSEL DIMENSIONS (in.) SHIPPING WEIGHT MODEL DIAMETER MAXIMUM FLOW CONNECTION STYLE QUANTITY ABCDEFG (lbs) (in.) (gpm) SIZE / TYPE

ORDERING CONFIGURATIONS (SIZE 1 & 2 BAGS ONLY)

4NBF11-2 1 1 7 80 2 in. NPT 19* 5.7 22.5 8.6 30.1 12.3 5.65 64 4NBF12-2 2 1 7 160 2 in. NPT 19* 6.3 36.3 8.6 43.9 12.3 5.65 82 4NBF12-2F 2 1 7 160 2 in. FLANGE 19* N/A 37.8 8.6 45.4 12.3 7.1 82 4NBF12-3F 2 1 7 160 3 in. FLANGE 19* N/A 37.8 8.6 45.4 12.3 7.1 90 4NBF42-4F 2 4 7 640 4 in. FLANGE 6.0 N/A N/A 21.9 62.0 27.8 16 419 4NBF62-6F 2 6 7 960 6 in. FLANGE 7.1 N/A N/A 27.8 70.7 34.0 17.4 660 ORDERING CONFIGURATIONS (SIZE 3 & 4 BAGS ONLY) 4NBF13-1 3 1 4 15 1 in. NPT 6.0* 5.1 13.5 4.5 20.4 8.8 3.65 24 4NBF14-1 4 1 4 30 1 in. NPT 6.0* 5.1 13.5 4.5 25.9 8.8 3.65 29

* Maximum - adjustable leg fully extended Materials: 304 SST with EPDM closure o-ring. 150 psi and 300°F rated. Multi-bag vessels standard offering with mechanical lift. Optional vessel and o-ring materials available.

MAX. ALLOWABLE MAX. ALLOWABLE • EPDM O-ring is standard (optional material available) MATERIAL PRESSURE (MAP) TEMP. (MAT) • Multi-bag vessels come standard with mechanical cover lift 304 SST 150 psi (10.3 bar) 300°F (149°C) • 316 SST material of construction available upon request

ORDERING INFORMATION

4 N BF -

MATERIAL DESIGN SERIES BAG FILTER SERIES BAG QTY BAG BAG LENGTH INLET / OUTLET

N Non-ASME 1 16.5 in. 2, 2F or 3F 2 in. NPT, 2 in. ANSI or 3 in. ANSI 4 304 SST 1 BAG OR BF MULTIPLE BAGS 2 32 in. 2, 2F or 3F 2 in. NPT, 2 in. ANSI or 3 in. ANSI 1 3 8 in. 1 1 in. NPT 4 14 in. 1 1 in. NPT

4 2 32 in. 4 4 in. NPT

6 2 32 in. 6 6 in. NPT

101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 37 WesFlo® Filter Housings WesFlo Filter Housings GB SERIES

WesFlo® GB Series ASME (U or UM) Multi-round Bag Vessels Accommodate High Flow Rates & High Particulate Retention

APPLICATIONS Water Food & Beverage Oil Cutting Oils Designed to handle flow rates of up to 4,200 gpm (15,900 lpm), the WesFlo® GB Series bag and strainer filter vessels provide excellent Lubricants filtration in a wide range of industrial and chemical applications. All Chemicals aspects of design, materials, construction and workmanship of the GB Solvents Vessel Series conform to ASME code. (Also available in non-ASME code design and construction.) Electronics Inks/Paints/Coatings Pulp & Paper BENEFITS

• Accepts standard #2 size bag filters or mesh-lined baskets • Built in accordance with ASME (U or UM stamp) Boiler and Pressure vessel code • Non-code design and construction (parallel code standards) • Standard design pressure is 150 psi (10.3 bar) or 300 psi (20.7 bar) • Available in carbon steel, 304 or 316L stainless steel • Single O-ring seal closure design assures quick, positive cover seal • Swing bolts with hex nuts for easy closure • Buna-N standard O-ring with optional Viton®, Neoprene, EPDM and fluoropolymer elastomers available • O-ring sealed baskets to prevent bypass • Floating spring loaded bag compression plate seal to prevent bypass • Bags located near vessel opening for ease of accessibility • Cover locating pin for quick and accurate cover alignment • In-line inlet and outlet for uniform piping elevation • Bottom inlet for even flow distribution • Stainless steel perforated basket • Other materials available • Customizable designs available (per specifications) 38 GB

MAX DESIGN TEMPS

CARBON STEEL 500°F (260°C) 304 SST 300°F (150°C) 316 SST 400°F (204°C) GASKET 250°F (121°C)

CLOSURE O-RING GUIDE

MATERIAL MAX TEMP

NITRILE (BUNA-N)** 250°F (121°C) EPDM (EPR) 300°F (149°C) FKM (VITON®) 400°F (204°C)

**NITRILE O-ring is standard

Note: Wessels also offers non- code cartridge filter vessels. For more information, please refer to the 4NBF datasheet.

DIMENSIONS (in.) MAXIMUM FLOW MODEL NO. OF BAGS * SHIPPING WEIGHT (gpm) A B C D E F (lbs) (IN/OUT) GB22-4FBBK1 2 400 57.75 40.50 16.50 4 8 27.31 450 GB32-4FBBK1 3 400 60.56 43.38 18.50 4 8 27.50 475 GB42-6FBBK1 4 800 64.94 47.00 22.50 6 10 35 570 GB62-6FBBK1 6 900 65.19 47.50 24.50 6 10 40 600 GB72-8FBBK1 7 1400 70.88 52.50 28.50 8 12 46 760 GB82-8FBBK1 8 1600 71.94 52.63 30.75 8 12 46 850 GB102-8FBBK1 10 1600 72.63 53.00 32.75 8 12 48 1000 GB122-10FBBK1 12 2400 79.25 58.50 36.75 10 14 56 1200 GB162-10FBBK1 16 2450 79.63 58.50 40.88 10 14 60 1650 GB172-12FBBK1 17 3400 85.38 63.63 42.88 12 16 67 2200 GB232-12FBBK1 23 3500 86.44 63.75 49.00 12 16 75 2600 GB302-14FBBK1 30 4300 95.38 70.13 55.00 14 18 85 3400

*Actual flow rate is dependent on fluid viscosity, micron rating, contaminant and media type. Consult flow charts for each application. GB10 and larger have closure bolts with hex nuts in lieu of eye nuts.

ORDERING INFORMATION

GB 2 - F

# OF INLET/OUTLET MATERIAL DESIGN SERIES BAG FILTER SERIES BAG LENGTH INLET / OUTLET CONNECTION TYPE COVER LIFT COLUMNS CONFIGURATION OMIT CARBON STEEL OMIT ASME / 150 psig 2 2 32 in. 4 4 in. F ANSI SORF BB BOTTOM IN/BOTTOM OUT K1 MECHANICAL MULTIPLE BAGS GB 4 304 SST H ASME / 300 psig (7.06 in. O.D.) 3 6 6 in. BS BOTTOM IN/SIDE OUT K2 HYDRAULIC 6 316 SST N Non-ASME 4 8 8 in. SB SIDE IN/BOTTOM OUT 6 10 10 in. SS SIDE IN/SIDE OUT 7 12 12 in. 8 14 14 in. 10 12 16 17 23 30 101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 39 WesFlo® Filter Housings WesFlo Filter Housings TC SERIES

WesFlo® TC Series Cartridge Filter Vessel Stainless Steel Non-ASME code design

APPLICATIONS Solvents Chemicals Potable Water Parts Washer The models have a 316 stainless steel shell and a four- boss 316 stainless steel head for applications where an all-stainless steel construction is required. The vessels feature a head which accepts SOE TC style ﬁlter cartridges and eliminates the possibility of ﬂuid bypass.

BENEFITS

• Vessels are sealed using a ring type thread closure which requires no special tools to change the cartridges (quick cartridge change) • 222 seal cup for TC and competitive cartridge sealing (M3, Code 3, Code 0) • Integrally cast holes for easy mounting • Buna-N standard O-ring with optional Viton®, EPR and silicon available • Available for use with 10”, 20” and 30” cartridge lengths • Vessel has no internal parts • Cartridge seating is positive and can be checked prior to closing • All components have electropolished ﬁnish

40 TC

CLOSURE O-RING GUIDE

MATERIAL MAX TEMP

NITRILE (BUNA-N)** 250°F (121°C) EPDM (EPR) 300°F (149°C) FKM (VITON®) 400°F (204°C) SILICON 400°F (204°C)

**NITRILE O-ring is standard

DIMENSIONS (in.) FLOW MAXIMUM PRESSURE CARTRIDGE LENGTH MODEL SHIPPING WEIGHT (gpm) (psi) (in.) A B PIPE SIZE (lbs) (NPT) TC10-075 5 200 10 12.25 3.94 .75 7.8 TC20-075 10 200 20 22.38 3.94 .75 9 TC30-075 15 200 30 32.50 3.94 .75 10.2 TC10-100 5 200 10 12.25 3.94 1 7.8 TC20-100 10 200 20 22.38 3.94 1 9 TC30-100 15 200 30 32.50 3.94 1 10.2

ORDERING INFORMATION

TC -

CARTRIDGE SEAL* CARTRIDGE LENGTH FNPT CONNECTION SIZE

10 10 in. 075 3/4 in. 222 O-RING/FLAT CAP 20 20 in. 100 1 in. 30 30 in.

*Note: Buna-N is standard seal.

101 Tank Street Greenwood, IN 46143 P: 317-888-9800 F: 317-865-7411 www.westank.com 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 Wessels Company is an international supplier and manufacturer of Greenwood, IN Ti n, OH custom and specialty pressure vessels servicing the hydronic and HVAC industries worldwide. Headquartered in the US Midwest, Wessels employs a 110,000 square foot facility in Greenwood, Indiana responsible for the manufacture of tanks up to 36” diameter and a 60,000 square foot Large Tank Division in Ti n, Ohio capable of building vessels up to 144” dia- -meter. ASME and Non-ASME specication available.

PRODUCT LINE OVERVIEW

REPLACEABLE FIXED GLYCOL MAKEUP AIR & DIRT BLADDER DIAPHRAGM COMPRESSION PACKAGE SEPARATOR

SHOCK & SURGE PLATE & FRAME SHELL & TUBE BRAZED PLATE BUFFER TANK ARRESTOR HEAT EXCHANGER HEAT EXCHANGER HEAT EXCHANGER

PRIMARY/ MEDIA SECONDARY BLAST POT STORAGE FLASH BLOWDOWN HEADER

CONDENSATE CUSTOM AIR PURGER FILTRATION FULL-FLOW NEUTRALIZER FABRICATION

Wessels Company Phone: 317-888-9800 62 101 Tank Street Fax: 317-888-9988 Greenwood, IN 46143 www.wesselscompany.com