Fiber Optics and Photonics for Aerospace Applications

MISSION-CRITICAL INTERCONNECT SOLUTIONS

Harsh-Environment Fiber Optic Connectors and Cable Assemblies Plus Ruggedized Aerospace-Grade Photonics RUGGED PCB-MOUNT TRANSCEIVERS FOR ETHERNET, HIGH-SPEED VIDEO, AND STORAGE

Fiber Optics and Photonics for Aerospace Applications Small form-factor, EMI shielded and radiation- Dual transceivers, quad Bi-directional high-vibration Harsh-Environment Fiber Optic Connectors and Cable tolerant transceivers transmitters, quad receivers transceivers high-temperature tolerant Assemblies Plus Ruggedized Aerospace-Grade Photonics Turnkey fiber optic and Ruggedized PhotonicFlex assemblies RF-OVER-FIBER AND HIGH-DATARATE PHOTONIC CONTACTS AND CONNECTORS FOR PARALLEL OPTICAL TRANSCEIVERS BOX I/O FIBER-TO-COPPER MEDIA CONVERSION MT FERRULE: RUGGEDIZED, HIGH-DENSITY GLENAIR FRONT RELEASE (GFR): THE FAST ROAD TO FIBER OPTIC INTEGRATION

RF-over-fiber low-noise Parallel optical 40 Gb/s Opto-electronic receptacle connectors populated with PCB-mount transceiver PCB-mount transceivers Size #8 Photonic transmitter and receiver contacts

Rugged MT and expanded-beam MT for SuperNine® D38999 Glenair Front Release (GFR) fiber optic connection system RUGGED ELECTRICAL-OPTICAL MEDIA CONVERTERS ETHERNET SWITCHES / and Series 79 connectors—our highest-density solution termini directly incorporate retention clip and sealing AGGREGATORS SERIES 806 MIL-AERO: MIL-DTL-38999 GLENAIR HIGH DENSITY (GHD): THE SIZE #18 PERFORMANCE IN A MICRO MINIATURE PACKAGE TERMINI HIGH-DENSITY SOLUTION

Copper-to-fiber media converters Copper-to-fiber media converters Rugged aggregated signal and for video applications for Ethernet applications Ethernet switch technologies Series 806 Mil-Aero micro miniature fiber optics: Glenair High Density (GHD) rugged fiber optics: nearly double advanced performance, reduced size and weight the density of standard butt-joint solutions

MIL-DTL-38999 SERIES III TYPE: THE ARINC 801: STANDARD DENSITY COMPLEMENTARY HIGH-SPEED HYBRID AND ELECTRICAL INTERCONNECT SOLUTIONS AEROSPACE STANDARD FOR FIBER OPTICS HERMAPHRODITIC CONTACT SOLUTION

The Joint Strike Fighter solution: tight-tolerance MIL-DTL-38999 type fiber optic connectors with QPL termini ARINC 801 ultra-low dB loss fiber optic insert in a standard El Ochito® high-speed octaxial contacts with Series 806 Mil-Aero High-Speed Micro-D Hybrid optical / electrical MIL-DTL-38999 connector package micro miniature circular and Series 792 rectangular packaging high-density SWaP solution interconnect solutions

© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 © 2020 Glenair, Inc • Glenair Signature Rugged Fiber Optics and Photonics 1 GLENAIR Fiber Optic Cables TURNKEY SIGNATURE and Harnesses: Fiber Optic Cables and Harnesses FIBER OPTIC turnkey environmental CONNECTION for rugged mission-critical applications SYSTEMS and inside-the-box assemblies

Glenair manufactures every popular mission-critical fiber optic interconnect system including MIL-DTL-38999 type, MIL- DTL-64266 NGCON, MIL-PRF-28876, ARINC 801, and more. Our fiber optic cable assembly team can integrate these ruggedized, military grade fiber optic technologies into turnkey cable and harness assemblies—terminated, tested, and ready for immediate use. Examples shown below range from inside-the- box pigtail assemblies to harsh environmental aerospace cables, Hybrid environmental overmolded junction boxes, and hybrid optical / electrical solutions. fiber optic / electrical cable assembly, Harsh environment repairable MIL-DTL-38999 Series III type MIL-DTL-38999 type with 29504/4 and /5 QPL termini with FiberCon backshell to prevent fiber media damage

Hybrid MIL-DTL-38999 series III type fiber optic / electrical cable junction box

Hybrid optical / electrical assembly for weight reduction in a high-speed datalink application Harsh environment overmolded MIL-DTL-38999 Series III type composite

Field-deployable hermaphroditic GFOCA fiber optic cable assembly Fiber optic multibranch assembly with flexible conduit wire protection and integrated cable storage bay

High-density Next-Generation (NGCON) fiber optic harness assembly

Specialized MT ribbon fiber low-profile molded Point-to-point fiber optic cable with integrated strain relief breakout capabilities Cable reels and field-deployment technologies for both Glenair GFOCA and Eye-Beam® GMA fiber optic systems

GFOCA I/O-to- board assembly with overbraiding High-speed video fiber for mechanical optic switch and cable Turnkey PhotonicFlex (optical flex circuit asembly) with Inside-the-box MIL-DTL-38999 type I/O connector to junction box assembly rugged MT ferrule terminations protection board cable harness

2 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 3 GLENAIR Rugged High-Density ULTRA HIGH-DENSITY SIGNATURE MT Ferrule Fiber Optic MT Ferrule FIBER OPTIC Connection System—with Signature fiber optic connection system: CONNECTION Mil-Grade SuperNine® SYSTEMS SuperNine D38999 Packaging

SuperNine® connectors with plug-and-play MT ferrule accommodation - Shell Size / Insert Arrangements 1 1 CONNECTOR CONNECTOR CONNECTOR 1

CONNECTOR 1 MASTER KEY MASTER KEY MASTER KEY MASTER KEY 21 21 21 4 4 4 2 2 2 21 4 2 1 1 1 3 3 3 21 21 21 1 3 3 3 3 21 3

Shell Size-Insert Arrangement 11-1 Shell Size-Insert Arrangement 13-2 Shell Size-Insert Arrangement 15-3 Shell Size-Insert Arrangement 17-4 CONNECTOR CONNECTOR CONNECTOR CONNECTOR

Up to 24MASTER fibers KEY (1 MTMASTER ferrule) KEY MASTERUp KEY to 48 fibersMASTER KEY (2 MT ferrules) Up to 72 fibers (3 MT ferrules) Up to 96 fibers (4 MT ferrules)

1 1 1 4 4 4

1 3 2 1 3 2 1 3 2 1 4

3 2 1

2 1 2 1

2 1 SuperNine® MT Performance Specifications

2 1

2 2 2 3 3 3

2 1 1 1

Test Description Performance Requirements/Specifications 3 1 Optical Insertion Loss, Multimode Expanded Beam -0.5 dB Typical (50/125)

2 2 2 Optical Insertion Loss, Multimode PC -0.3 dB Typical (50/125) 2 CONNECTOR CONNECTOR CONNECTOR CONNECTOR Optical Insertion Loss, Singlemode PC -0.3 dB Typical (9/125) 1 3 1 3 1 3 MASTER KEY MASTER KEY MASTER KEY 1 2 3 1 2 3 1 2 3 1 3 1 2 MASTER1 KEY 2 1 2 1 2 3 1 2 Optical Insertion Loss,1 Singlemode1 APC 1 -0.3 dB Typical (9/125) 4 4 4 1 4 Optical Back Reflection, Multimode Expanded Beam Better than -28 dB Optical Back Reflection, Singlemode PC Better than -30 dB Optical Back Reflection, Singlemode APC Better than -60 dB Mechanical Shock 300 G Half-sine Pulse, 3 ms Duration, 3 Times Both Direction Each Axis per TIA-455-14A 49.5 Grms at Ambient Temperature per MIL-STD-1678-3, Measurement 3201, Test Condition C, 5.3c, Vibration, Random 8 hours exposure each axis Mating Durability 500 Mating Cycles per TIA-455-21A Humidity * 90%-95% RH, 96 hour Exposure per TIA-455-5C, Method A, Test Condition A Thermal Cycle * 5 Cycles, -40°C to 85°C with 1 hour Exposure per EIA-364-32F, Condition VIII, Method A Temperature Life * 85°C for 336 hours per TIA-455-4C *cable and epoxy dependent

TURNKEY SUPERNINE® MT FIBER OPTIC CABLE SETS PARALLEL OPTICAL Glenair can design, terminate, and test complex multibranch and point-to-point TRANSCEIVERS Singlemode and assemblies incorporating SuperNine® MT connectors Panel mount MT receptacles may Ruggedized, high-density MT ferrule multimode fiber be terminated to standard commercial fiber optic interconnects for termination to Low insertion loss board-level transceivers. MT plug assemblies are available with ruggedized backshells fiber optics in Glenair Signature Environmental sealing: or environmental overmolding. Low-profile cable ® IP67 mated, IP68 available overmolds provide fiber media organization and ribbon-to- SuperNine aerospace-grade at interface The ideal solution for board-level wire strain relief. optical-to-electrical conversion Physical contact and MIL-DTL-38999 connectors utilizing MT fiber optic ferrules. expanded beam ALSO AVAILABLE: EXPANDED-BEAM MT SOLUTIONS RUGGED, HIGH-DENSITY HOW-TO-ORDER MT FERRULE KITS Sample Part Number 181-139 -1253 -12 M Basic Part Number MT Ferrule kit 24 fibers Fiber type -126, -1253, -1253A (See Table I) Number of Fibers -12, -24 (See Table I) Ferrule Style M = Male (use with Plug) F = Female (use with Receptacle) 3 fibers Lens ferrule Table I Dash Fiber End Fiber Size Core/ No. of Ferrule Up to 24 fibers in a single compact, No. Type Face Cladding Fibers Identification MATERIAL/FINISH 50/125 12 E-ME12 lightweight ferrule (7mm x 3mm) -126 MM PC • Ferrule: Polyphenylene Sulfide Resin 62.5/125 24 E-ME24 • Pin Clamp, Spring: Stainless Steel -1253 SM PC 9/125 12 E-E12 • Boot: TPE -1253A SM APC 9/125 24 E-E24

4 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 5 Rev 05.14.21 Rev 05.14.21 SERIES 183-002 SERIES 183-002 SuperNine MT Fiber Optic Connectors SuperNine MT Fiber Optic Connectors How to order connectors How to order connectors

SuperNine MT Cable Plug SuperNine MT Wall-Mount Receptacle, Standard Holes Sample Part Number 183-002 ME G6 -17-4 N 1 Sample Part Number 183-002 ME H7 -17-4 N 1

Basic Part Number MT Ferrule Fiber Optic Connector Basic Part Number MT Ferrule Fiber Optic Connector Material/Finish Code See Table I Material/Finish Code See Table I Connector Style G6 = Plug with EMI/RFI ground spring Connector Style H7 = Wall-mount receptacle with round holes Shell Size / 11-1, 13-2, 15-3, 17-4 Shell Size / 11-1, 13-2, 15-3, 17-4 Insert Arrangement Order MT ferrule kit P/N 181-139 Insert Arrangement Order MT ferrule kit P/N 181-139 Alternate Key Position A, B, C, D, E, N = Normal U = Universal (per MIL-DTL-38999) Alternate Key Position A, B, C, D, E, N = Normal U = Universal (per MIL-DTL-38999) Insert Cavity 1 = Standard position Insert Cavity 1 = Standard position Clocking Orientation 2 = Cavity position rotated 45° to master key/keyway Clocking Orientation 2 = Cavity position rotated 45° to master key/keyway (see Table II) 3 = Cavity position rotated 90° to master key/keyway (see Table II) 3 = Cavity position rotated 90° to master key/keyway

SuperNine MT Wall-Mount Receptacle, Slotted Holes, Clinch Nuts, Helicoils Sample Part Number 183-002 ME S7 -17-4 N 1

SuperNine MT Jam Nut Mount Receptacle Basic Part Number MT Ferrule Fiber Optic Connector Sample Part Number 183-002 ME 08 -17-4 N 1 Material/Finish Code See Table I S7 = Wall-mount receptacle with slotted holes Basic Part Number MT Ferrule Fiber Optic Connector CM = Wall-mount receptacle with metric clinch nuts Material/Finish Code See Table I Connector Style CS = Wall-mount receptacle with standard clinch nuts HM = Wall-mount receptacle with metric helicoils Connector Style 08 = Jam nut receptacle HS = Wall-mount receptacle with standard helicoils Shell Size / 11-1, 13-2, 15-3, 17-4 Shell Size / 11-1, 13-2, 15-3, 17-4 Insert Arrangement Order MT ferrule kit P/N 181-139 Insert Arrangement Order MT ferrule kit P/N 181-139 Alternate Key Position A, B, C, D, E, N = Normal U = Universal (per MIL-DTL-38999) Alternate Key Position A, B, C, D, E, N = Normal U = Universal (per MIL-DTL-38999) Insert Cavity 1 = Standard position Insert Cavity 1 = Standard position Clocking Orientation 2 = Cavity position rotated 45° to master key/keyway Clocking Orientation 2 = Cavity position rotated 45° to master key/keyway (see Table II) 3 = Cavity position rotated 90° to master key/keyway (see Table II) 3 = Cavity position rotated 90° to master key/keyway

Table I - Material and Finish Table II - Insert Cavity Clocking Orientation Code Material Finish Description Shell Size-Arrangement Shell Size-Arrangement Shell Size-Arrangement Shell Size-Arrangement Code ME Electroless Nickel 11-1 13-2 15-3 17-4 MT Nickel-PTFE, Grey

CONNECTOR 1

SuperNine MT In-Line Receptacle Aluminum CONNECTOR 1 MASTERCONNECTOR KEY 1 NF Cadmium, Olive Drab MASTER KEY

Alloy 21 4 2 21 21 4 2 4 Sample Part Number 183-002 ME 05 -17-4 N 1 ZR Zinc-Nickel, Black 1 2 1 3 1 21 1 3 21 3 3 TZ Tin-Zinc, Green/Gold 21 3 Basic Part Number MT Ferrule Fiber Optic Connector 3 XM Electroless Nickel Material/Finish Code See Table I Composite XW Cadmium, Olive Drab CONNECTOR MASTERCONNECTOR KEY

Connector Style 05 = In-line receptacle Z1 Passivate MASTER KEY

Stainless 1

1 3 2 1 4 3 2 1

Shell Size / 11-1, 13-2, 15-3, 17-4 Electro-Deposited 2 3 2 1

Steel 2 1

ZL 2 1

2 1

Nickel 2 3

Insert Arrangement Order MT ferrule kit P/N 181-139 2 3

1 2

1 1 Alternate Key Position A, B, C, D, E, N = Normal U = Universal (per MIL-DTL-38999)

2 NOTES 2 Insert Cavity 1 = Standard position 2 CONNECTOR CONNECTOR 1 3 Clocking Orientation 2 = Cavity position rotated 45° to master key/keyway • Pin (male) and socket (female) MASTER KEY 1 2 3 1 3 MASTER KEY 1 2 1 2 3 1 2 1 1 2 (see Table II) 3 = Cavity position rotated 90° to master key/keyway ferrule kits can be used in either plug 1 4 3 1 4 or receptacle connectors. Preferred configuration is female ferrule in receptacle connector

6 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 7 Rev 05.14.21 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. Rev 05.14.21 GLENAIR Rugged High-Density ULTRA HIGH-DENSITY SIGNATURE MT Ferrule Fiber Optic Rugged MT Fiber Optic Connectors FIBER OPTIC Connection System— Signature fiber optic connection system: CONNECTION With Mil-Grade Miniature SYSTEMS miniature Series 79 packaging Series 79 Packaging

ABOUT SERIES 79 MT FIBER OPTIC CONNECTORS Designed in accordance with rugged mil-aero industry specifications, the Glenair Series 79 MT fiber optic connector is the world’s smallest ruggedized MT connector solution. High-density MT ferrules are packaged in precision-machined rectangular aluminum shells with electroless nickel finish, or passivated stainless steel shells for higher temperature applications. Receptacles may be equipped with optional EMI gaskets, and mate bottom-to-bottom with plug assemblies for robust resistance to vibration -06 plug, with retaining plate for and shock. Designed for harsh-environment, inside-the-box use in parallel optics, fiber EMI shield termination and strain optic backplanes, missile systems, spacecraft and satellites, heads-up displays, and relief of ribbon or round fiber cable other ribbonized or flex-circuit fiber optic datalinks, the Series 79 MT delivers superior low insertion-loss performance (up to 500 mating cycles). Connectors are supplied in single (consult factory for dual and quad) MT configurations with banding platform or ultra low-profile retaining plate options.

The MT Ferrule High-Density Advantage PARALLEL OPTICAL TRANSCEIVERS

-S7 receptacle with standard 24 fibers retaining plate

3 fibers

Up to 24 fibers in a singlecompact, Glenair’s rugged, small form-factor lightweight ferrule parallel optical transceivers are the -S7 receptacle with conductive (7mm x 3mm / .276" x .118") —same real ideal solution for board-level optical- estate as three size #16 termini side by side to-electrical conversion utilizing MT EMI gasket fiber optic ferrules.

Small form-factor, Series 79 MT Ferrule Fiber Optic Connector Performance Specifications per QTP-773 and Test Report GT-19-111 Single-ferrule high-density high-density fiber optic Test Description Test Results solution for rugged 50/125 μm fiber @ 850 nm: ≤0.15 dB average; 0.31 dB typical Optical Insertion Loss, multimode (consult factory for singlemode) MT datalinks in Glenair mil-aero applications 50/125 μm fiber @ 1300 nm: ≤0.21 dB average; 0.38 dB typical Temperature tolerance - 40°C to +85°C, 5 Cycles, 56 hours Temperature Cycling: per TIA/EIA-455-3, Test Condition C-2 Signature Series from -40°C to +85°C Max. CIT = .25 dB; Max. IL post-test = .30 dB First 100 cycles with CIT measured every 10 cycles Optimized for use with Mating Durability 79 rectangular Max. CIT = 0.12 dB; Max. IL post-test = 0.20 dB parallel optic transceivers From 101st cycle to 500th cycle with CIT measured every 25 cycles Mating Durability, Extended packaging in ribbon or round cable Max. CIT = 0.21 dB; Max. IL post-test = 0.30 dB applications Physical Shock 1: 50g Peak, 11 ms duration, per TIA/EIA-455-14, Test Condition E Max. CIT = 0.14 dB; Max. IL post-test = 0.42 dB; discontinuity ≤0.5 dB @ <1 us. optimize SWaP in Designed for optimal Physical Shock 2: 160g Peak, 4 ms duration, per MIL-STD-202, Method 213 Max. CIT = 0.04 dB; Max. IL post-test = 0.40 dB; discontinuity ≤0.5 dB @ <1 us. low insertion loss Additional Physical Shock: 300g Peak, 0.5 ms duration, per MIL-STD-833E, Max. CIT = .15 dB; Max. IL post-test = 0.20 dB; discontinuity ≤0.5 dB @ <1 us. mission-critical performance in high Method 2002.4 (30 shocks total) Vibration 1: 5-15 Hz, .12" double amplitude, 2 hours/axis (6 hours total) Connector series supports vibration and shock Max. CIT = 0.06 dB; Max. IL post-test = 0.37 dB mil-aero both ribbon and round environments per MIL-STD-202, test condition 201, Sinusoidal Vibration 2 : 20g Peak, 10-2,000 Hz, 4 hours/axis (12 hours total) per TIA-455-11, cable, as well as standard Max. CIT = 0.08 dB; Max. IL post-test = 0.43 dB applications and expanded-beam Test Condition IV, Sinusoidal MT ferrules Weight Plug with Ferrule kit 5.5 grams · Receptacle with Ferrule kit 7.5 grams

8 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 9 SERIES 79 MINIATURE SERIES 79 MINIATURE MT Fiber Optic Connectors MT Fiber Optic Connectors How To Order Series 791 MT Ferrule How To Order MT Ferrule Kits and Fiber Optic connectors Series 79 MT to MT Ferrule Cable Assembly

How To Order Glenair 183-003 Series 79 MT Fiber Optic Connectors How To Order MT Ferrule Kits Sample Part Number 183-003 ME -06 -L -1 Sample Part Number 181-133 -126 -12 P Basic Part Number MT Ferrule kit Basic Number Series 79 Single MT Fiber Optic Connector Fiber type -126, -1253, -1253A (See Table I) ME = Al Alloy / Electroless Nickel ZR = Al Alloy / Zinc Nickel, Black Material / Finish Number of Fibers -12, -24 (See Table I) NF = Al Alloy / Cadmium, O.D. Z1 = Stainless Steel / Passivate Ferrule Style P = Male (use with Plug) S = Female (use with Receptacle) -06 = Plug (used with male MT ferrule) Connector -07 = Receptacle (used with female MT ferrule) Type Table I -S7 = Receptalcle with EMI gasket (used with female MT ferrule) Receptacle with female MT ferrule, Dash Fiber End Fiber Size Core/ No. of Ferrule Pin Clamp Identification Hardware for PLUGS Rear Panel Mount Jackposts for No. Type Face Cladding Fibers Identification (Male Kit only) available with or without EMI gasket -L = Hex Head Jackscrew, RECEPTACLES: MATERIAL/FINISH 50/125 12 M-ME12 -126 MM PC 1 Through Hole Mounting non-removable -X = for .031" panel thickness • Ferrule: Polyphenylene Sulfide Resin 62.5/125 24 M-ME24 Hardware -B = Thru-Hole -W = for .047" panel thickness • Pin Clamp, Spring: Stainless Steel -1253 SM PC 9/125 12 E-E12 2 Through Holes -V = for .062" panel thickness • Boot: TPE -1253A SM APC 9/125 12 E-E12 2 Through Holes -T = for .094" panel thickness -1 = 12 or 24 channel without banding platform Retaining Plate / How To Order Series 79 MT Ferrule Fiber Optic Cable Assemblies -2 = 12 or 24 channel with banding platform for EMI shield termination Banding Platform Sample Part Number FA07364 -06 -17 ME -B4 -50 -L -1 -036 L and strain relief Basic Number Series 79 MT Ferrule Fiber Optic Cable Asembly "V" PANEL THICKNESS .875 -06 = Sr. 79 Plug (used with male MT ferrule) .210 MAX. .360 MAX. .388 MAX. A Connector Type -07 = Sr. 79 Receptacle (used with female MT ferrule) CHANN.1 CHANN.12 EMI GASKET -S7 = Sr. 79 Receptalcle with EMI gasket (used with female MT ferrule) 2X JACKPOST -06 = Sr. 79 Plug (used with male MT ferrule) Receptacle with female MT ferrule, -07 = Sr. 79 Receptacle (used with female MT ferrule) Receptacle, .254 -S7 = Sr. 79 Receptalcle with EMI gasket (used with female MT ferrule) retaining plate, and banding MAX. .460 ow Profile B Connector Type -12 = ST Connector -13 = FC Connector -14 = SC Connector platform RETAINING PLATE -15 = GC Connector -16 = LC Connector WITHOUT BANDING -17 = MT Connector (male) -18 = MT Connector (female) CHANN.13 CHANN.24 PLATFORM -19 = MTP Connector (male) -20 = MTP Connector (female) Material / Finish .760 MAX. ME = Al Alloy, Electroless Nickel NF = Al Alloy, Cad/Olive Drab 2X JACKPOST (-06, -07, -S7) ZR = = Al Alloy, Zinc-Nickel, Black Z1 = Stainless Steel, Passivate -B2 = 12 bare ribbon fibers -B4 = 24 bare ribbon fibers (Mutimode only) Receptacle, ith Fiber Qty. / Type -R2 = 12 round ribbon fibers -R4 = 24 round ribbon fibers (Multimode only) anding Platform Fiber Size -09 = 9.3/125 Singlemode -50 = 50/125 Multimode -62 = 62.5/125 Multimode RETAINING PLATE WITH BANDING Plug Receptacle PLATFORM Mounting Hardware -L = Hex head jackscrew, non-removable -X = Rear-panel jackpost, .031" thickness -B = Thru-hole -W = Rear-panel jackpost, .041" thickness 1.125 MAX. (A Connector) .875 -V = Rear-panel jackpost, .062" thickness 2X JACKSCREW CHANN. 12 CHANN. 1 -T = Rear-panel jackpost, .094" thickness Series 79 Plug Series 79 Receptacle Mounting Hardware -L = Hex head jackscrew, non-removable -X = Rear-panel jackpost, .031" thickness Plug, ith Plug with male MT ferrule and .460 (B Connector, -B = Thru-hole -W = Rear-panel jackpost, .041" thickness anding Platform applies to Sr. 79 only) -V = Rear-panel jackpost, .062" thickness retaining plate Omit = if not Sr. 79 connector -T = Rear-panel jackpost, .094" thickness RETAINING PLATE Banding Platform -1 = without banding platform -2 = with banding platform CHANN. 24 CHANN. 13 WITH BANDING PLATFORM (A Connector) 2X JACKSCREW Banding Platform .875 .240 0.700 MAX (B Connector, -1 = without banding platform -2 = with banding platform Omit if not Sr. 79 connector .329 MAX. MAX. applies to Sr. 79 only) Length In inches (e.g. -0036 = 36 inches) Plug, ithout .460 anding Platform Protective Cover L = supplied less covers Omit = supplied with covers .195 Optical performance note: Insertion MAX. RETAINING PLATE LENGTH WITHOUT BANDING PLATFORM loss to be less than 1.5 dB when

measured at 1310 nm wavelength for M MATERIAL/FINISH/NOTES singlemode, or when measured at 850 P2 P2

FA0XXXX-XXX-XXXX nm for multimode -XX-XX-XXXX-X Mounting hardware: stainless steel / passivated P1 MFG 06324 D/C YYWW Plug with male MT ferrule with EMI gasket (optional): conductive silicone P3 P3 retaining plate and banding Additional materials, finishes, connector configurations (dual and quad layouts), and A CONNECTOR B CONNECTOR platform hardware options are available, consult factory

10 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 11 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. Rev. 08.26.20 GLENAIR Glenair Front Release RAPID INTEGRATION SIGNATURE (GFR) Fiber Optic Glenair Front Release (GFR) FIBER OPTIC Connection System: the CONNECTION Fast Road to Fiber Optic Signature fiber optic connection system SYSTEMS Integration

Glenair Front Release (GFR) fiber optic connection systems perform at insertion loss levels equivalent to other high-performance, tactical fiber optic systems such as M29504 termini used in D38999 and M28876 connectors. The GFR system enables Glenair to integrate optical media in Micro-D and D-Subminiature shells as well as micro miniature circular packaging. Contact the factory for availability and application engineering assistance for both standard and custom fiber optic connection systems.

GFR GLENAIR FRONT RELEASE MICRO MINIATURE CIRCULAR CONNECTORS

How To Order GFR Micro Miniature Circular Connectors Sample Part Number 180-132 M 06- 9-4 P A Series 180-132 GFR Micro Miniature Circular C Anodize, Black M Electroless Nickel CAD/Olive Drab over NF Aluminum Electroless Nickel Shell Size Alloy Zinc-Nickel/Olive Drab over ZN Electroless Nickel Black Zinc-Nickel over ZNU Electroless Nickel Z1 Stainless Steel Passivate 04- Jam Nut w/ Wire Holes 06- Plug Connector Style 08- Jam Nut Receptacle 07- Wall Mount Receptacle Shell Size/Insert Arr. 9-2, 9-4, 13-8, 16-12 Contact the Factory for circular Contact Type P - Pin Termini S - Socket Termini connectors requiring enhanced vibration Key Polarization A, B, C, D (See Table). Omit for 9-2 Arrangement which has 2 Keys/Keyways only. and mechanical shock performance

1.150 MAX 1.150 MAX Precision size 16 pin- The Glenair Front Release system allows for .093 .683 .093 .683 .125 MAX .125 MAX socket front release 1.340 MAX PANEL PANEL THICKNESS THICKNESS 1.140 MAX termini with integrated O-RING rapid connector integration of optical media O-RING O-RING .093 .650 retention clip by placing retention and environmental Singlemode and sealing components directly on the termini. multimode for all popular fiber sizes Glenair GFR enables fast design and Typical insertion loss less development of unique fiber optic connector than 0.5 dB

Supports cylindrical and MEDIUM STRAIGHT shell packages without costly tooling and rectangular connectors KNURL engineering. Connector shells available 06- Plug 04- Jam Nut Receptacle with Wire Holes 08- Jam Nut Receptacle 07- Wall Mount Receptacle in aluminum and stainless steel Key Polarization Insert Arrangements (pin rear shown) Position A° B° A 150° 210° 1 1 3 1 2 7 2 1 2 9 10 B° A° A° B° 8 8 4 B 75° 210° 6 GFR fiber optic termini 3 12 11 4 3 7 5 integration in micro miniature C 95° 230° 5 4 rectangular and circular For 9-2 D 140° 275° Plug Receptacle Con guration only connector packaging 9-2 9-4 13-8 16-12

12 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 13 RAPID INTEGRATION RAPID INTEGRATION Glenair Front Release (GFR) Glenair Front Release (GFR) How to order GFR Termini How to order GFR Micro-D and D-Subminiature connectors

PIN TERMINI How To Order GFR Fiber Optic Termini How To Order GFR Micro-D Connectors Sample Part Number 181-011 -126 K D Sample Part Number 180-064 -25 -4 M 181-012 GFR front-release pin terminus 180-064 GFR Micro-D Plug Series Series 181-011 GFR front-release socket terminus 180-063 GFR Micro-D Receptacle Ferrule Typical Typical Fiber Size -9 (1 terminus max) -15 (2 termini max) -21 (3 termini max) Dash No. Shell Size Hole Ø Fiber Type core/cladding/coating -25 (4 termini max) -31 (5 termini max) -100 (8 termini max) Single O-Ring Design -125 125.5 μm Singlemode 9/125 μm No. of Termini 1, 2, 3, 4, 5, 8 (Standard) -126S 126.0 μm Singlemode 9/125 μm C Anodize, Black -126 126.0 μm Multimode 50/125, 62.5/125 μm M Aluminum Electroless Nickel -142 142.0 μm Multimode 100/140 μm Material / Finish NF Alloy CAD/Olive Drab over Electroless Nickel 62.5/125/155 μm -156 156.0 μm Multimode ZN Zinc-Nickel/Olive Drab over Electroless Nickel (Polyimide) Avoid damage! Consult the factory for Dash No. Z1 Stainless Steel Passivate 100/140/172 μm mating / unmating instructions -173 173.0 μm Multimode 1.000 Dual O-Ring (Polyimide) .105 .090 Design 100/140/172 μm -175 175.0 μm Multimode 1.000 .233 .105 (Polyimide) .293 .090 -231 231.0 μm Multimode 200/225 μm MATING MATING SOCKET TERMINI -236 236.0 μm Multimode 200/230 μm SURFACE SURFACE 4 -286 286.0 μm Multimode 200/280 μm 4 .125±.002 ALIGNMENT -448 448.0 μm Multimode 400/440 μm PIN HOLES ALIGNMENT Alignment Sleeve K = Stainless Steel Sleeve Omit = Ceramic Sleeve (standard) PINS 1 1 4X R .010 2X (socket only) Omit designator for pin terminus FULL (181-012 MAX (181-011 PIN TERMINUS) O-Ring Option D = Dual O-Rings Omit = Single O-Ring (standard) RADIUS SOCKET TERMINUS) .274 .125 MAX Single O-Ring Design Recommended PANEL (Standard) Dummy Terminus Panel Cutout THICKNESS 181-051 Size 16 Dummy Terminus for GFR Connectors 180-064 Plug 180-063 Receptacle

TERMINI MATERIAL AND FINISH Ferrule: Zirconia Ceramic Dual O-Ring Design Alignment Sleeve (socket): Zirconia Ceramic or Stainless Steel/Passivate How To Order GFR D-Subminiature Connectors Protective Cover (socket): BeCu Alloy/Nickel Sample Part Number 180-066 -15 -5 -M Body: Stainless Steel/Passivate 180-066 GFR D-Sub Plug Series Spring (pin): Stainless Steel/Passivate 180-065 GFR D-Sub Receptacle DUMMY TERMINUS Bushing (pin): Stainless Steel/Passivate -9 (4 termini max) -15 (5 termini max) Shell Size Retention Clip: BeCu Alloy -25 (8 termini max) -50 (12 termini max) O-Ring(s): Fluorosilicone No. of Termini 4, 5, 8, 12 Crimp Sleeve: Brass Alloy/Nickel C Anodize, Black Size #16 M Aluminum Electroless Nickel Dummy Terminus NOTES Material / Finish NF Alloy CAD/Olive Drab over Electroless Nickel ZN Zinc-Nickel/Olive Drab over Electroless Nickel Crimp sleeves are supplied with terminus assemblies. Spares may be ordered separately. Z1 Stainless Steel Passivate See Glenair GAP-031 and GAP-031B for termination and assembly tools/procedures.

Table II: Tools and Accessories ø.120 1.000 1.000 2 PLCS .285 MAX .233 .125 182-005S Polishing Tool, socket Avoid damage! Consult the factory for 182-005P Polishing Tool, pin mating / unmating instructions 1 1 8 8 182-012 Crimp Tool ALIGNMENT ALIGNMENT 182-013 Insertion Tool, Straight PIN PINS HOLES 182-014 Insertion Tool, 90 Degree 182-015 Removal Tool

8 8 182-016 Insertion/Removal Tool, Alignment Sleeve, socket 1 1 (181-011 (181-012 181-011-S Protective Cover with Ceramic Sleeve SOCKET PIN TERMINUS) TERMINUS) .125 181-011-K Protective Cover with Stainless Steel Sleeve .293 265-002 Crimp Sleeve, Ø 2.2mm Max Jacket 180-066 Plug 180-065 Receptacle

14 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 15 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. GLENAIR ADVANCED-PERFORMANCE MICRO MINIATURE SIGNATURE Series 806 Mil-Aero: Series 806 Mil-Aero FIBER OPTIC Advanced fiber optic CONNECTION performance, reduced Signature fiber optic connection system SYSTEMS size and weight How to order connectors

Series 806 Arrangements compatible with #20HD Fiber Optic Termini Mating face of pin connector. 17 1 Socket 13 1 1 2 11 1 18 10 1 2 27 numbering is 1 2 8 3 14 1 2 2 7 3 9 10 9 15 31 reversed. 5 3 8 20 7 4 3 10 6 4 8 3 4 56 4 Symbol 5 7 6 5 indicates 10 master key location. Arrangement No. 8-3 9-5 10-8 11-10 12-15 14-20 16-31 No. of Termini 3 5 8 10 15 20 31

CONNECTOR PLUG AND RECEPTACLE SHELL STYLES FOR #20HD FIBER OPTIC TERMINI

Cable Plug Square-Flange Receptacle Jam Nut Receptacle In-Line Receptacle

#20HD FIBER OPTIC TERMINI FOR SERIES 806 MIL-AERO CONNECTORS

Single or multimode. Ceramic ferrule. 0.5 dB loss. Size 20HD fiber optic termini are compatible with Series 806 connectors with size 20HD contact arrangements. These snap-in, rear release termini feature precision ceramic ferrules and alignment sleeves for accurate fiber alignment. Next-generation small Typical insertion loss 0.5 dB. Fits 50/125 and 62.5/125 multimode and 9/125 singlemode fiber. Innovative fiber optic / electrical form factor aerospace- connector design meets key performance grade circular connector Designed for harsh How-To-Order #20HD Fiber Optic Termini for Series 806 Connectors benchmarks for harsh vibration, shock, and application environments Optical Fiber ØA Fiber Size environmental settings in rigid conformance such as military and Termini Type Type Part Number Ferrule Hole Core/Cladding commercial aircraft Pin Singlemode 181-134-1255 125.5 microns 9/125 with MIL-DTL-38999 Series III -- but at nearly Outstanding Pin Multimode 181-134-126 126.0 microns 50/125, 62.5/125 half the size and weight environmental, electrical, Socket Singlemode 181-135-1255 125.5 microns 9/125 optical, and mechanical Socket Multimode 181-135-126 126.0 microns 50/125, 62.5/125 SAVE SIZE AND WEIGHT WITH SERIES 806 CONNECTORS performance Integrated anti- FACTORY-TERMINATED SERIES 806 FIBER OPTIC CABLE ASSEMBLIES decoupling technology Glenair is able to supply turnkey fiber optic cable assemblies for both MIL-DTL-38999 High density 20HD fiber environmental applications as well as non-jacketed harnesses for smallest shell (size 11) use inside the box. Rugged Series 806 Mil-Aero with size #20 HDfiber Series 806 Mil-Aero .750 in. mating threads termini arrangements smallest shell (size 8) 2 #16 electrical or optical optic termini are a significant size and weight savings compared to .500 in. mating threads contacts / termini conventional D38999 or other standards. Please consult the factory for 3 #20 electrical or optical design assistance and quoting. contacts / termini

16 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 17 Rev. 12.17.20 Rev. 12.17.20 ADVANCED-PERFORMANCE MICRO MINIATURE ADVANCED-PERFORMANCE MICRO MINIATURE Series 806 Mil-Aero Series 806 Mil-Aero Signature fiber optic connection system Signature fiber optic connection system How to order connectors How to order connectors

How To Order Series 806 Plugs How To Order Series 806 In-Line Receptacles SAMPLE PART NUMBER 806-012 -ME 8-3 A M A SAMPLE PART NUMBER 806-019 -ME 8-3 B B A Product 806-012 = Cable Plug Product 806-019 = Line Receptacle ME = Aluminum, Electroless Nickel ME = Aluminum, Electroless Nickel Shell Material and MT = Aluminum, Ni/PTFE Shell Material and MT = Aluminum, Ni/PTFE ZR = Aluminum, Black Zinc-Nickel ZR = Aluminum, Black Zinc-Nickel Finish NF = Aluminum, Olive Drab Cadmium Finish NF = Aluminum, Olive Drab Cadmium Z1 = Stainless Steel, Passivated Z1 = Stainless Steel, Passivated Arrangement Number 8-3, 9-5, 10-8, 11-10, 12-15, 14-20, 16-31, Arrangement Number 8-3, 9-5, 10-8, 11-10, 12-15, 14-20, 16-31, (Shell Size - Insert Arr.) (see table on previous page) (Shell Size - Insert Arr.) (see table on previous page) Connector supplied without termini Connector supplied without termini A = Pin A = Pin Contact Type B = Socket Contact Type B = Socket order fiber optic termini separately order fiber optic termini separately M = Metric accessory threads M = Metric accessory threads Shell Style Shell Style B = Nano Band platform B = Nano Band platform Polarizing Position Polarizing Position A B C D E F A B C D E F (Table 2) (Table 2)

How To Order Series 806 Square-Flange Receptacles How To Order Series 806 Jam Nut Receptacles SAMPLE PART NUMBER 806-013 -ME 8-3 B B C A SAMPLE PART NUMBER 806-020 -ME 8-3 B M A 806-013 = Panel Receptacle, Product 806-020 = Jam Nut Square Flange Product Receptacle ME = Aluminum, Electroless Nickel ME = Aluminum, Electroless Nickel Shell Material and MT = Aluminum, Ni/PTFE ZR = Aluminum, Black Zinc-Nickel Shell Material and MT = Aluminum, Ni/PTFE Finish ZR = Aluminum, Black Zinc-Nickel NF = Aluminum, Olive Drab Cadmium Finish Z1 = Stainless Steel, Passivated NF = Aluminum, Olive Drab Cadmium Z1 = Stainless Steel, Passivated Arrangement Number 8-3, 9-5, 10-8, 11-10, 12-15, 14-20, 16-31, (Shell Size - Insert Arr.) (see table on previous page) Arrangement Number 8-3, 9-5, 10-8, 11-10, 12-15, 14-20, 16-31, (Shell Size - Insert Arr.) (see table on previous page) Connector supplied without termini A = Pin Connector supplied without termini Contact Type B = Socket A = Pin Contact Type B = Socket order fiber optic termini separately order fiber optic termini separately M = Metric accessory threads Shell Style M = Metric accessory threads B = Nano Band platform Shell Style B = Nano Band platform T = Thru holes Mounting Hole Style Polarizing Position C = Clinch nut, #4-40 (rear panel mounting) A B C D E F (Table 2) Polarizing Position A B C D E F (Table 2)

SPECIFICATIONS MATERIAL/FINISH SPECIFICATIONS MATERIAL/FINISH • Operating temperature: -55°C to +125°C. Temperature rating • Ferrule, alignment sleeve: zirconia ceramic • Operating temperature: -55°C to +125°C. Temperature rating • Ferrule, alignment sleeve: zirconia ceramic depends on the cable and epoxy used. • Body, shroud: copper/nickel/zinc alloy depends on the cable and epoxy used. • Body, shroud: copper/nickel/zinc alloy • Termination method: epoxy/polish • Spring (socket, not shown): stainless steel, passivated • Termination method: epoxy/polish • Spring (socket, not shown): stainless steel, passivated • Mating durability: 500 cycles • Protective cover (socket): copper alloy, nickel plated • Mating durability: 500 cycles • Protective cover (socket): copper alloy, nickel plated • Random vibration: 49.5 Grms, EIA-364-28 Test Condition V. • Random vibration: 49.5 Grms, EIA-364-28 Test Condition V. Maximum optical discontinuity 0.5 dB, 50 microseconds. Maximum optical discontinuity 0.5 dB, 50 microseconds. • Mechanical shock: 300 G, TIA-455-14 Test Condition D. • Mechanical shock: 300 G, TIA-455-14 Test Condition D. Maximum optical discontinuity 0.5 dB, 50 microseconds. Maximum optical discontinuity 0.5 dB, 50 microseconds.

18 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 19 Rev. 12.17.20 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. Rev. 12.17.20 GLENAIR SIZE- AND WEIGHT-SAVING SIGNATURE Glenair High Density Glenair High Density (GHD) FIBER OPTIC (GHD): nearly double the CONNECTION density of standard mil- Signature HD fiber optic connection system SYSTEMS spec fiber optic designs

Glenair High Density (GHD) Insert arrangements

1 Alignment Pin, Alignment Pin, 1 12 1 12 2 11 2 6 Small 1 4 Large 2 11 13 22 13 16 14 21 3 10 3 10 15 20 2 3 3 5 4 9 14 15 4 16 19 9 4 5 8 17 18

6 7 5 8

6 7 Shell Size 11 Arrangement 4 Shell Size 13 Shell Size 15 Arrangement 6 -Shell Size 17 Arrangement 16 Arrangement 22

1 2 18 34 1 16 19 2 2 1 16 15 17 15 20 3 3 17 1 16 3 14 14 52 2 15 33 4 21 32 16 17 24 17 28 27 18 34 35 51 3 14 26 25 19 45 33 36 64 50 4 13 18 13 4 20 25 30 29 38 37 44 37 53 63 49 22 31 46 32 23 18 36 5 54 62 15 35 52 43 30 38 70 4 13 21 31 48 47 51 55 65 69 61 5 26 29 12 36 42 5 39 40 35 22 31 12 37 22 19 5 12 39 66 68 47 48 50 30 6 19 27 28 11 32 33 34 6 56 67 60 23 14 24 23 38 49 41 30 6 40 57 59 46 7 11 39 40 29 20 21 10 20 21 22 23 6 7 41 58 45 24 28 8 44 9 11 42 13 25 24 29 7 7 27 8 10 10 43 9 26 8 8 28 12 9 25 26 27 9 11 10 Shell Size 19 Shell Size 21 Arrangement 30 Arrangement 40 Shell Size 23 Shell Size 25 Arrangement 52 Arrangement 70 Plug face marking with removable alignment sleeve retainer (ASR) shown. Receptacle face - opposite. ASR includes two guide pins and a threaded center jackscrew. Fiber Optic Pin Termini Specifications GHD Fiber Optic Part Number Reference Assembly Dash Number Fiber Size A Dia. Glenair Dwg. Number Product Description Keyed Non-Keyed Core/Cladding [microns] 181-047 #18 Pin Terminus, Keyed for APC Polish 181-047-1255C 181-056-1255C 9/125 (Singlemode) 125.5 181-056 #18 Pin Terminus, non-keyed (standard) 181-047-1260C 181-056-1260C 9/125, 50/125, 62.5/125 126.0 181-058 #18 Dummy Terminus 181-047-1270C 181-056-1270C 50/125, 62.5/125 127.0 180-122 (05) In-Line Receptacle Connector 181-047-1420C 181-056-1420C 100/140 142.0 180-122 (06) Plug Connector with Alignment Sleeve Retainer The system of choice for military and Innovative #18 (1.25mm 181-047-1450C 181-056-1450C 100/140 145.0 180-122 (08) Jam Nut Mount Receptacle Connector ferrule) front-release 181-047-1560C 181-056-1560C 62.5/125/155 (Polyimide) 156.0 180-122 (H7) Square Flange Receptacle with Round Holes commercial air and space applications. genderless termini 181-047-1570C 181-056-1570C 62.5/125/155 (Polyimide) 157.0 180-122 (S7) Square Flange Receptacle with Slotted Holes accommodate 900μ to 181-047-1730C 181-056-1730C 100/140/172 (Polyimide) 173.0 * See fiber optic catalog for complete part number information Outstanding optical and environmental 2.0mm jacketed fiber 181-047-1750C 181-056-1750C 100/140/172 (Polyimide) 175.0 Pin Density Comparison: M85045/16 cable 181-047-2360C 181-056-2360C 200/233 236.0 performance with nearly double the density Glenair High Density Versus D38999 and M28876 accommodation 181-047-2860C 181-056-2860C 200/280 286.0 Connector Style / Size 11 13 15 17 19 21 23 25 of standard mil-spec, butt-joint solutions. Crimp Sleeve is supplied with Terminus Assembly, and may be ordered separately. For Composite, aluminum or terminus less crimp sleeve, omit C from end of part number (e.g. 181-056-1260) D38999 Cavity Count 2 4 5 8 11 16 21 29/37 stainless steel shells M28876 Cavity Count 2 4 8 N/A N/A N/A 31 N/A Table I: Material and Finish Single key termini for GHD Cavity Count 4 6 16 22 30 40 52 70 APC polish available Code Material Finish Description M Electroless Nickel Better optical MT Nickel - PTFE, Grey Aluminum performance than NF Cadmium, Olive Drab Alloy D38999 with nearly ZNU Zinc-Nickel, Black GHD plug connector double the density ZR Zinc-Nickel, Black (RoHS) Glenair High Density (GHD) with alignment sleeve Precision alignment XM Electroless Nickel fiber optic conduit assembly retainer, and square sleeve retainer with XMT Nickel - PTFE, Grey flange receptacle. Termini Composite available in keyed and non- integrated guide pins XW Cadmium, Olive Drab keyed styles XZN Zinc-Nickel, Black ZL Electro-Deposited Nickel Stainless Steel Z1 Passivate

20 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 21 SIZE- AND WEIGHT-SAVING SIZE- AND WEIGHT-SAVING Glenair High Density (GHD) Glenair High Density (GHD) Signature HD fiber optic connection system Signature HD fiber optic connection system How to order connectors How to order connectors

Part Number Developement Part Number Developement Sample Part Number 180-122 NF 06 -15-16 N C Sample Part Number 180-122 NF 05 -15-16 N Series / Basic Part No. Glenair High Density Fiber Optic Connector Series / Basic Part No. Glenair High Density Fiber Optic Connector Material/Finish See Material/Finish Table Material/Finish See Material/Finish Table Connector Style 06 = Plug with Alignment Sleeve Retainer Connector Style 05 = In-Line Receptacle Shell Size/Insert Arr. 11-4, 13-6, 15-16, 17-22, 19-30, 21-40, 23-52, 25-70 Shell Size/Insert Arr. 11-4, 13-6, 15-16, 17-22, 19-30, 21-40, 23-52, 25-70 Alternate Key Position* A, B, C, D, E, N = Normal Alternate Key Position* A, B, C, D, E, N = Normal O-Ring Option C = Conductive O-Ring Omit = Standard O-Ring MASTER 1.240 MAX 1.290 MAX KEYWAY ALIGNMENT O-RING ALIGNMENT SLEEVE SEAL PIN HOLE, RETAINER 12 1 MASTER INSERT SMALL KEY (ASR) 11 2 16 13

10 3 9 4 15 14

1 12 ALIGNMENT 8 5 PIN 2 11 ALIGNMENT 7 6 13 16 .510 MAX 3 10 PIN HOLE, 4 9 FULL MATE 14 15 LARGE 5 8 INDICATOR ALIGNMENT, ALIGNMENT 6 7 PIN, SMALL PIN, LARGE Part Number Developement Sample Part Number 180-122 NF H7 -15-16 N Part Number Developement Series / Basic Part No. Glenair High Density Fiber Optic Connector Sample Part Number 180-122 ASR -15-16 Material/Finish See Material/Finish Table Series / Basic Part No. Glenair High Density Fiber Optic Connector Connector Style H7 = Wall Mount Receptacle with Round Holes Connector Style ASR = Alignment Sleeve Retainer Shell Size/Insert Arr. 11-4, 13-6, 15-16, 17-22, 19-30, 21-40, 23-52, 25-70 Shell Size/Insert Arr. 11-4, 13-6, 15-16, 17-22, 19-30, 21-40, 23-52, 25-70 Alternate Key Position* A, B, C, D, E, N = Normal VISUAL ORIENTATION ØSMALL ØLARGE INDICATOR (ALIGN WITH ALIGNMENT MASTER KEYWAY 1.240 MAX ASR FACE ALIGNMENT 1 12 CONNECTOR MASTER KEY) PIN HOLE, ALIGNMENT PIN, SMALL LARGE ALIGNMENT 2 11 SLEEVE (TYP) 12 1 PIN HOLE, 16 13 HOUSING SMALL 3 11 2 10 16 13

4 9 10 3 9 4 14 15 15 14 5/64" HEX 5 8 2X ALIGNMENT JACKSCREW 8 5 ALIGNMENT PIN 7 6 6 7 PIN, LARGE .510 MAX ØLARGE ØSMALL FULL MATE INDICATOR Part Number Developement Sample Part Number 180-122 NF 08 -15-16 N Part Number Developement Series / Basic Part No. Glenair High Density Fiber Optic Connector Sample Part Number 180-122 NF S7 -15-16 N Material/Finish See Material/Finish Table Series / Basic Part No. Glenair High Density Fiber Optic Connector Connector Style 08 = Jam Nut Receptacle Material/Finish See Material/Finish Table Shell Size/Insert Arr. 11-4, 13-6, 15-16, 17-22, 19-30, 21-40, 23-52, 25-70 Connector Style S7 = Wall Mount Receptacle with Slotted Holes Alternate Key Position* A, B, C, D, E, N = Normal Shell Size/Insert Arr. 11-4, 13-6, 15-16, 17-22, 19-30, 21-40, 23-52, 25-70 1.280 MAX MASTER .890 MAX Alternate Key Position* A, B, C, D, E, N = Normal KEYWAY .579 .555 ALIGNMENT MASTER KEYWAY 1.240 MAX PIN HOLE, 12 1 LARGE ALIGNMENT 11 2 16 13 12 1 PIN HOLE,

10 3 9 4 11 2 SMALL 15 14 16 13 3 8 5 10 ALIGNMENT 9 4 ALIGNMENT 7 6 PIN HOLE, 15 14 PIN HOLE, 8 5 SMALL LARGE 7 6 .510 MAX .510 MAX .126 PANEL FULL MATE FULL MATE .062 THICKNESS INDICATOR INDICATOR

22 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 23 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. ® GLENAIR SuperNine® SuperNine TIGHT-TOLERANCE SIGNATURE Tight-Tolerance MIL-DTL-38999 Series III Type FIBER OPTIC CONNECTION MIL-DTL-38999 Sr. III Advanced fiber optic connection system SYSTEMS Fiber Optic Connection System

MIL-DTL-38999 type fiber optic connection system termination, inspection, test, and cleaning tools are available now from Glenair. We also offer comprehensive F/O training services for assembly and maintenance technicians.

Glenair optical fiber test probes and connector adapters provide accurate and repeatable testing of MIL-DTL-38999 F/O assemblies

Glenair M29504/04 and /05 QPL termini are in stock and ready for immediate, same-day shipment A complete range of metal and composite backshells and protective covers is available

Eye-Beam GLT termini and jumpers are easily integrated into Glenair MIL- Hybrid electrical/optical layouts are available including the DTL-38999 type MIL-STD-1560 17-8 layout shown above connector packaging

MIL-PRF-29504/04 and /05 Table I: Material and Finish Fiber Optic Termini Performance Data Code Material Finish Description Test Type Performance Requirement M Electroless Nickel -55°C to +165°C (dependent on epoxy and MT Nickel - PTFE, Grey Operating Temperature Aluminum cable) NF Cadmium, Olive Drab Composite, aluminum Alloy Temperature Cycling -65°C to +175°C The high-perfomance D38999 type fiber and stainless steel shells ZNU Zinc-Nickel, Black Thermal Shock -55°C to +150°C, 5 cycles optic interconnect system with qualified MIL- available ZR Zinc-Nickel, Black (RoHS) Temperature Life +150°C for 1,000 hours XM Electroless Nickel Qualified size #16 Random Vibration 20-2,000 Hz, 42.2 g's XMT Nickel - PTFE, Grey PRF-29504 /4 and /5 termini, successfully MIL-PRF-29504 /4 and Composite Shock (Half-sine Pulse) 300 g Peak Load XW Cadmium, Olive Drab /5 precision ceramic deployed in hundreds of commercial and Mechanical Shock MIL-S-901, Grade A, Type B, Class I XZN Zinc-Nickel, Black termini Mating Durability 500 cycles (cleaning after 100 matings) ZL Electro-Deposited Nickel military aerospace Stainless Steel Singlemode and Salt Spray 48 hours (Terminus only) Z1 Passivate and other multimode fiber, from Cable Retention Force 22.0 lbs (dependent on cable construction) 9/125 to 1000 microns applications Ultra-low insertion loss, INSERT ARRANGEMENTS A B N A U <.50dB typical R B g V L A S C J M B P T T — from F-16 A P C f W K A A K B b U h J M W R A B H B C c S D From 2 to 37 Termini A K L e q X H L G B S N D C N B A B E B J X a f d V D r C H V S G R E M C d p m upgrade G L e Y R P K D Plug and In-Line, Jam C C H D U M Z W E n D F T P F D C F c Z F D E E D J E b L Y X F a Nut and Square Flange E G E N G systems to the F H F K G G M K J H H Terminated and tested point-to-point Receptacles L revolutionary F-35 and multibranch D38999 type fiber optic Patented MIL-DTL-38999 15-97 cable assemblies 11-2 13-4 15-5 17-8 19-11 21-16 23-21 25-29 25-37 Joint Strike Fighter. fiber optic test probes Hybrid and adapters Per MIL-STD-1560. Mating face of pin insert shown.

24 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 25 SuperNine® TIGHT-TOLERANCE SuperNine® TIGHT-TOLERANCE MIL-DTL-38999 Series III Type MIL-DTL-38999 Series III Type How to order Termini and Connectors How to order Connectors

M29504/04 AND /05 TYPE, STYLE 1 PIN AND SOCKET TERMINI FOR MIL-DTL-38999 SERIES III Part number development Sample Part Number 180-091 XW 08 -17-8 P N Fiber Size Core/Cladding/ Ferrule Part Number Coating (Microns) Hole Size Ref. M29504/04-XXXX Ref. M29504/05-XXXX Series / Basic Part No. D38999 Series III Type 181-00X-125 9/125 (Singlemode) 125.5 M29504/04-4208 M29504/05-4237 Material/Finish See Material/Finish Table 181-00X-126S 9/125 (Singlemode) 126.0 M29504/04-4209 M29504/05-4238 181-002-XXX 181-00X-126 50/125 & 62.5/125 126.0 M29504/04-4210 M29504/05-4239 Connector Style 08 = Jam Nut Receptacle Pin Terminus 181-00X-127 50/125 & 62.5/125 127.0 M29504/04-4040 M29504/05-4046 MIL-STD-1560 11-2, 13-4, 15-97 (combo), 17-8, 19-11, 21-16, 23-21, 181-00X-142 100/140 142.0 M29504/04-4043 M29504/05-4049 Shell Size/Insert Arr. 25-29, 25-37 181-00X-144 100/140 144.0 N/A N/A Insert Designation P = Pin S = Socket 181-00X-145 100/140 145.0 M29504/04-4044 M29504/05-4050 Alternate Key Position* A, B, C, D, E, N = Normal; Per MIL-DTL-38999 181-001-XXX 181-00X-156 62.5/125/155 (Polyimide) 156.0 M29504/04-4211 M29504/05-4240 Socket Terminus 181-00X-157 62.5/125/155 (Polyimide) 157.0 M29504/04-4212 M29504/05-4241 181-00X-173 100/140/172 (Polyimide) 173.0 M29504/04-4087 M29504/05-4088 181-00X-175 100/140/172 (Polyimide) 175.0 M29504/04-4213 M29504/05-4242 Part number development 181-00X-231 200/230 231.0 N/A N/A Sample Part Number 180-091 XW H7 -17-8 P N 181-00X-236 200/230 236.0 N/A M29504/05-4243 Series / Basic Part No. D38999 Series III Type 181-048-16 181-00X-286 200/280 286.0 N/A M29504/05-4244 Size 16 Dummy Terminus 181-00X-448 400/440 448.0 N/A M29504/05-4245 Material/Finish See Material/Finish Table reduces weight and cost versus 181-00X-533 486/500 533.0 N/A N/A standard termini Connector Style H7 = Wall Mount Receptacle with Round Holes (Std) MIL-STD-1560 11-2, 13-4, 15-97 (combo), 17-8, 19-11, 21-16, 23-21, Shell Size/Insert Arr. 25-29, 25-37 Insert Designation P = Pin S = Socket Alternate Key Position* A, B, C, D, E, N = Normal; Per MIL-DTL-38999

SUPERNINE FIBER OPTIC CONNECTORS Part number development Part Number Developement Sample Part Number 180-091 XW S7 -17-8 P N Sample Part Number 180-091 XW 06 -17-8 P N Series / Basic Part No. D38999 Series III Type Series / Basic Part No. D38999 Series III Type Material/Finish See Material/Finish Table Material/Finish See Material/Finish Table Connector Style 06 = Plug Connector Connector Style S7 = Wall Mount Receptacle with Slotted Holes MIL-STD-1560 11-2, 13-4, 15-97 (combo), 17-8, 19-11, 21-16, 23-21, MIL-STD-1560 11-2, 13-4, 15-97 (combo), 17-8, 19-11, 21-16, 23-21, Shell Size/Insert Arr. 25-29, 25-37 Shell Size/Insert Arr. 25-29, 25-37 Insert Designation P = Pin S = Socket Insert Designation P = Pin S = Socket Alternate Key Position* A, B, C, D, E, N = Normal; Per MIL-DTL-38999 Alternate Key Position* A, B, C, D, E, N = Normal; Per MIL-DTL-38999

Part number development Part Number Developement Sample Part Number 180-091 XW T7 -17-8 P N Sample Part Number 180-091 XW 05 -17-8 P N Series / Basic Part No. D38999 Series III Type Series / Basic Part No. D38999 Series III Type Finish See Material/Finish Table Material/Finish See Material/Finish Table Connector Style* 05 = In-Line Receptacle Connector Style T7 = Wall Mount Receptacle with Threaded Insert Holes MIL-STD-1560 11-2, 13-4, 15-97 (combo), 17-8, 19-11, 21-16, 23-21, Shell Size/Insert Arr. 25-29, 25-37 MIL-STD-1560 11-2, 13-4, 15-97 (combo), 17-8, 19-11, 21-16, 23-21, Shell Size/Insert Arr. 25-29, 25-37 Insert Designation P = Pin S = Socket Alternate Key Position* A, B, C, D, E, N = Normal; Per MIL-DTL-38999 Insert Designation P = Pin S = Socket Alternate Key Position* A, B, C, D, E, N = Normal; Per MIL-DTL-38999

26 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 27 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. GLENAIR MIL-DTL-38999 SERIES III TYPE SIGNATURE ARINC 801 FIBER OPTIC Ultra-Low dB Loss CONNECTION ARINC 801 Fiber Optics Fiber Optic Connectors and Termini SYSTEMS Specifications and insert arrangements

Table I: Material and Finish Series 180-159 ARINC 801 Performance Specifications Code Material Finish Description Test Description Performance Requirements/Specifications M Electroless Nickel Multimode (PC): 0.30 dB typical at 850/1300nm Insertion Loss MT Nickel - PTFE, Grey Singlemode (UPC): 0.30 dB typical at 1310/1550nm Aluminum NF Cadmium, Olive Drab Multimode (PC): Better than 20 dB Alloy Return Loss ZN Zinc-Nickel, Olive Drab Singlemode (UPC): Better than 40 dB ZR Zinc-Nickel, Black (RoHS) Operating Temperature -55°C to +165°C (cable/epoxy dependent) XM Electroless Nickel Storage Temperature -40°C to +85°C (cable/epoxy dependent) XMT Nickel - PTFE, Grey Mating Durability 500 cycles, per TIA/EIA-455-21 Composite XW Cadmium, Olive Drab Vibration 23.1g RMS, 8 hrs/axis, per TIA/EIA-455-11, Test Condition VI-G XZN Zinc-Nickel, Black Mechanical Shock 300g Peak for 3ms, 3 shocks/axis in each direction, per TIA/EIA-455-14, ZL Stainless Electro-Deposited Nickel (half-sine pulse) Test Condition D Steel -55°C to +125°C, 50 cycles, per TIA/EIA-455-3, Test Condition C-4 Z1 Passivate Thermal Cycling (cable/epoxy dependent) Temperature Life +125°C for 1000 hrs, per TIA/EIA-455-4 (cable/epoxy dependent) +40°C for 240 hrs, 90% RH, per TIA/EIA-455-5, Method A, Test Humidity, Steady State Condition B Humidity, Temperature -25°C to +65°C, 10 cycles for 24 hrs, 90% RH, per TIA/EIA-455-5, Cycling Method B7a (cable/epoxy dependent)

FIGURE 1: ARINC 801 INSERT ARRANGEMENTS CONNECTOR MASTER KEY A H

A F B G A B E BA B D C D C F D E C Shell Size 11 Shell Size 13 Shell Size 15 Shell Size 17 Arrangement 2 Arrangement 4 Arrangement 6 Arrangement 8 Genderless terminus Commercial and military aerospace fiber optic design eliminates pin and C B A connection system designed for RF-over-fiber, socket complexity A B P D P S RT Rear-release size #16 A L C S R a N E eU dc N in-flight entertainment, avionics, and other A H B K M D M termini T Z B J G V f j C N S J high-speed data networking applications. Singlemode and U Y b K M P R g multimode E V W X L WF haM C L F Utilizing D38999 Series III type connectors, D H X Y Z Mechanical and D E F K G L E G G J Glenair ARINC 801 features environmental F H H J K performance IAW genderless termini, a Shell Size 19 Shell Size 21 Shell Size 23 Shell Size 25 ARINC 801 standards Arrangement 12 Arrangement 16 Arrangement 24 Arrangement 32 removable alignment sleeve retainer, and singlemode or MATERIAL/FINISH: Shells, Barrel, Coupling Nut: See Table I multimode 1.25mm termini for Inserts: Al Alloy / Anodize low insertion loss performance Guide Pins: Stainless Steel / Passivate Seals: Fluorosilicone and flexibility in cable choice. EMI/RFI/Ground Spring (G6 configuration): Copper Alloy / Nickel 28 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 29 MIL-DTL-38999 SERIES III TYPE MIL-DTL-38999 SERIES III TYPE ARINC 801 ARINC 801 Fiber Optic Connectors and Termini Fiber Optic Connectors and Termini How to order Termini and Plugs How to order Receptacles and Alignment Sleeve Retainers

How To Order How To Order Sample Part Number 181-076 – P –126 Sample Part Number 180-159 NF 06 –17–8 N

Fiber Optic termini Genderless terminus for ARINC 801 connector Fiber Optic connector ARINC 801 connectors, MIL-DTL-38999 Series III Type

Cable Jacket Diameter See Table I (previous page) Material/Finish Code See Table I (previous page) P = Pull-Proof (loose structure cable) 08 = Jam Nut Receptacle Cable Structure N = Non-Pull-Proof (tight structure cable or 900 micron buffer) 05 = In-Line Receptacle Connector Style, Receptacle H7 = Wall Mount Receptacle with Round Holes (Standard) Assembly Dash Number See Table II S7 = Wall Mount Receptacle with Slotted Holes T7 = Wall Mount Receptacle with Threaded Holes Table I: Cable Jacket Diameter Table II: Ceramic Ferrule Shell Size - Insert Arrangement See Figure I Dash No. Cable Jacket Diameter Typ Fiber Size Ø A Typ Fiber Ferrule L Color Alternate Key Position per MIL-DTL-38999 Series III. A, B, C, D, E, N = Normal, omit for universal key Dash No. (microns) A 900 micron buffer only (microns) Type Polish Type Inches Band – 2.0/1.7mm Core/Cladding -1255 125.5 Singlemode 9/125 PC .196/.192 Blue -1255A 125.5 Singlemode 9/125 APC .200/.196 Green 1.535 MAX 1.535 MAX 1.535 MAX -126S 126.0 Singlemode 9/125 PC .196/.192 Blue FULL MATE INDICATOR -126SA 126.0 Singlemode 9/125 APC .200/.196 Green A H -126 126.0 Multimode 50/125, 62.5/125 PC .196/.192 None B G

C F NOTES D E

Crimp sleeve is packaged loose with terminus assembly. Spares may be ordered separately, .510 MAX FULL MATE consult factory. .510 MAX FULL MATE .510 MAX JAM NUT WITH INDICATOR INDICATOR Termini for 900 micron buffer are not provided with crimp sleeves WIRE HOLES PANEL THICKNESS Wall Mount H7 PANEL SEAL .062-.126 Receptacles Round Holes MATERIAL AND FINISH 08 05 Ferrule: Zirconia Ceramic Jam Nut Receptacle In-Line Receptacle Terminus Bodies: Brass Alloy/Nickel A H A H Crimp Sleeve: Brass Alloy/Nickel B G B G

Spring: Stainless Steel/Passivate C F C F

D E D E How To Order Sample Part Number 180-159 NF 06 –17–8 N S7 T7 Slotted Holes Threaded Holes Fiber Optic connector ARINC 801 connectors, MIL-DTL-38999 Series III Type

Material/Finish Code See Table I (previous page) How To Order 06 = Plug Connector Style, Plug G6 = Plug with EMI/RFI Ground Spring Sample Part Number 180-159ASR –25–32 Shell Size - Insert Arrangement See Figure I Fiber Optic connector Alignment Sleeve Retainer for 180-159 plug connector

Alternate Key Position per MIL-DTL-38999 Series III. A, B, C, D, E, N = Normal, omit for universal key Shell Size - Insert Arrangement See Figure I

MASTER KEY 1.673 MAX NOTES 1. Housing: Al alloy/anodize H A G B 2. Misc hardware: stainless steel/passivate

F C 3. Alignment sleeve: zirconia ceramic E D 4. Alignment sleeve retainer is designed to meet or exceed all mechanical and performance requirements of ARINC 801 specification. 5. Ceramic alignment sleeve replacements may be purchased separately (P/N 181-056-S)

30 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 31 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. RUGGEDIZED RUGGEDIZED PHOTONIC Ruggedized High-Density, High PCB-Mount Photonic Transceiver Modules INTERCONNECT Signal Integrity Photonic SOLUTIONS Transceiver Modules—up to Parallel Optic Transceivers • RF-Over-Fiber Transceivers • 25Gbps Per Channel Bi-Directional Transceivers • Radiation-Tolerant Designs

PARALLEL OPTIC TRANSCEIVERS Glenair parallel optic transceivers deliver up to 25Gbps per channel high-speed data in free space optics (FSO) applications. Heat tolerant and compatible with conduction cooling for space applications, the transceivers are supplied as discrete printed circuit board mount devices, or with turnkey MTP jumpers or ruggedized MT fiber optic interconnections.

4 X 14 to 4 X 25 Gbps per fiber (up to 100 Gbps) Hermetic opto-electronic hybrid 12-channel Tx and Rx with 10Gbps/channel Conduction-cooling for space applications Compatible with MTP optical connector 46 Grms, 650G shock Supports 12-fiber ribbon cable -40°C to +85°C case temp SiGe and GaAs optoelectronic ICs Heavy ion radiation-tested

Convection cooling (left) and conduction cooling (right) designs as well as custom heat dissipation designs are available. 050-346 parallel optical transceiver, 4 X 10 – 14 Gbps Available evaluation boards: 050-346 parallel optic transceiver 0500-3007 parallel optical transceiver, 0.1 – 25 Gbps with MT-to-39029 fiber optic terminations

RF-OVER-FIBER TRANSCEIVERS Glenair PCB mount transceiver modules are Smallest footprint available Radio Frequency over Fiber systems integrate wireless radio frequency (RF) transmissions and fiber optic datalinks into a single ruggedized equivalents to SFP transceivers but with Jet fighter and space launch system. Benefits include lower transmission loss (attenuation) as well as reduced sensitivity to electromagnetic noise. Glenair shock and vibration tested ruggedized, low-noise, shielded RF-over-Fiber solutions have a 2MHz to 3.5GHz RF bandwidth and can be embedded inside- mechanical design suited to the harsh temperature the-box or incorporated into standalone copper-to-fiber media converters for environmental applications. High-speed board and vibration environments found in free space, interconnection — no 2MHz – 3.5 GHz antenna signal distribution High Spurious Free Dynamic Range (SFDR) link satellite, and other Mil-Aero applications. Optional soldering required High-frequency units in excess of 20 GHz APC fiber optic contact standard Digital Monitoring Interface (DMI) IAW SFF 8472. CML 100 Ohm differential High-vibration PCB mount solution Integrated high-speed PIN photo diode and low- input and output High bandwidth parallel optical modules with MT -40°C to +85°C operating case temperature noise RF amplifiers -40°C to +85°C operating datalink technology. Radiation tolerant. temperature range RF over Fiber PCB-Mount Component Selection Guide RUGGEDIZED PCB-MOUNT MODULES FOR ETHERNET, HIGH-SPEED VIDEO, AND STORAGE

050-406 050-407 050-400 050-404 050-405 PCB Mount PCB Mount PCB Mount PCB Mount PCB Mount RF-over-Fiber Transmitter RF-over-Fiber Receiver Aerosoace-grade DWDM Small form-factor, RF-over-Fiber Transceiver RF-over-Fiber Transmitter RF-over-Fiber Receiver EMI shielded and radiation- Dual transceivers, quad Bi-directional transceivers for free- high-vibration 2 MHz – 3.5 GHz 2 MHz – 3.5 GHz 20MHz to 3.5 GHz 2 MHz – 3.5 GHz 2 MHz – 3.5 GHz tolerant transceivers transmitters, quad receivers transceivers space optical links high-temperature tolerant Low-Noise configuration Low-Noise configuration

32 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 33 PCB-Mount Photonic Modules Glenair HDMI sFPDP FDDI 100BASE-FX 10GBASE-SR10GBASE-LR Transmitters, Receivers, and Transceivers Package 1000BASE-SX1000BASE-LX1000BASE-LX101000BASE-EX1000BASE-BX10 10GBASE-LX440GBASE-SR4100GBASE-SR4 DVI/ARINCSMPTE 818 HD-SDISMPTE 3G-SDI Part Number 1x Fibre Channel2x Fibre Channel4x Fibre Channel8x Fibre Channel Types 1 2 3 ETHERNET VIDEO FIBRE CHANNEL BUS OTHER DESCRIPTION DATARATE (Gbps) WAVE LENGTH (nm) LASER TYPE RECEIVER TYPE MAX. DISTANCE (km) PACKAGE TYPE 050-315 • • • • • • • Transceiver 0.1 - 5 850 VCSEL PIN TIA 0.5 1 050-316 • • • • • • • Dual Transmitter 0.1 - 5 850 VCSEL N/A 0.5 1 050-317 • • • • • • • Dual Receiver 0.1 - 5 850 N/A PIN TIA 0.5 1 050-318 • • • • • Transceiver 0.1 - 1.25 1310 FP PIN TIA 10 1 050-319 • • • • • • Dual Transmitter 0.1 - 2.5 1310 FP N/A 10 1 050-320 • • • • • • • • Dual Receiver 0.1 - 4.25 1310 N/A PIN TIA 10 1 050-321 • • Transceiver 0.05 - 0.2 1300 LED PIN TIA 20 1 050-324 • • • • • • • • Transceiver 0.1 - 2.5 1310 DFB PIN TIA 40 1 050-325 • • • • • • • • Dual Transmitter 0.1 - 2.5 1310 DFB N/A 40 1 050-327 • • • • • • • Transceiver 1 - 10.5 850 VCSEL PIN TIA 0.4 1 050-328 • • • • • • • Transceiver 1 - 10.5 1310 DFB PIN TIA 10 1 050-331 • • SMPTE Dual Transmitter 1.5 - 2.97 850 VCSEL N/A 1 1 050-332 • • SMPTE Dual Receiver 1.5 - 2.97 850 N/A PIN TIA 1 1 050-333 • • • • • • • Dual Transceiver 0.1 - 5 850 VCSEL PIN TIA 0.5 2 050-336 • • • • • • • Quad Transmitter 0.1 - 5 850 VCSEL N/A 0.5 2 050-337 • • • • • • • Quad Receiver 0.1 - 5 850 N/A PIN TIA 0.5 2 050-340 • • BIDI Transceiver 0.1 - 1.25 1310/1550 FP/FP PIN TIA 4 1 050-341 • • • • • • • BIDI Transceiver 1 - 10 1270/1330 DFB/DFB PIN TIA 10 1 050-342 • • • • CWDM Transceiver 0.1 - 2.5 CWDM DFB PIN TIA 20 1 050-343 • • • • • • • • CWDM Transceiver 1 - 10.5 CWDM DFB PIN TIA 10 1 050-346 • • • • • • Parallel Optical Transceiver 4 X 10 – 14 850 VCSEL PIN TIA 0.5 3 050-348 • • • • • • EMI Shielded Transceiver 0.1 - 5 850 VCSEL PIN TIA 0.5 1 050-352 • • Transceiver 0.05 - 0.2 1310 FP PIN TIA 10 1 050-354 • • • • • • • • Transceiver 2.5 - 5 1310 FP PIN TIA 10 1

PCB-Mount Modules 050-356 • • • • • • CWDM Dual Transmitter 0.1 - 2.5 CWDM DFB N/A 10 1 050-357 • • SMPTE Dual Receiver 1.5 - 2.97 1250-1600 VCSEL PIN TIA 10 1 050-358 • SMPTE CWDM Dual Transmitter 1.5 CWDM DFB N/A 10 1 050-360 • • • • • • • Radiation-Tolerant Dual Transmitter 0.1 - 5 850 VCSEL N/A 0.5 1 050-361 • • • • • • • Radiation-Tolerant Dual Receiver 0.1 - 5 850 VCSEL PIN TIA 0.5 1 050-362 • • • • • • • Radiation-Tolerant Transceiver 0.1 - 5 850 VCSEL PIN TIA 0.5 1 050-363 • • • • • • Radiation-Tolerant Quad Transmitter 0.1 - 5 850 VCSEL N/A 0.5 2 050-364 • • • • • • Radiation-Tolerant Quad Receiver 0.1 - 5 850 VCSEL PIN TIA 0.5 2 850 TX 050-369 Transceiver MMF TX · SMF RX 1 - 10 VCSEL PIN TIA 10 1 • • • • • • • • 1310 RX 050-373 • • • • • • • Dual-Transceiver (4 mounting screws) 0.1 - 5 850 VCSEL PIN TIA 0.5 2 050-374 • • • • • • • Quad Transmitter (4 mounting screws) 0.1 - 5 850 VCSEL N/A 0.5 2 050-375 • • • • • • • Quad Receiver (4 mounting screws) 0.1 - 5 850 N/A PIN TIA 0.5 2 050-376 • • • • • • • • CWDM Dual Transmitter 1 - 10 CWDM DFB N/A 10 1 050-379 • SMPTE CWDM Transceiver 1.5 CWDM DFB PIN TIA 10 1 050-385 • • • • • • • Radiation-Tolerant Dual Transceiver 0.1 - 5 850 VCSEL PIN TIA 0.5 2 050-386 • • • • • • • Dual Transmitter 1 - 10.5 850 VCSEL PIN TIA 0.4 1 050-389 • • SMPTE Transceiver 1.5 - 2.97 850 VCSEL PIN TIA 1 1 050-394 • • • BIDI Transceiver 0.1 - 2.5 1310/1490 DFB/DFB PIN TIA 10 1 050-397* • • • BIDI Transceiver 0.1 - 1.25 1310/1550 DFB/DFB PIN TIA 10 1 0500-3007 • • • • • • Parallel Optical Transceiver 4 X 25 850 VCSEL PIN TIA 0.1 3 0500-3011 • • • • • • DWDM EML FSO Transceiver 11.3 DWDM EML PIN TIA 40 1 34 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 35 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. RUGGEDIZED Ruggedized Size #8 RUGGEDIZED PHOTONIC RUGGED Photonic Transmitter and Photonic Contacts and Connectors INTERCONNECT Receiver Contacts and SOLUTIONS for Ethernet, Video and High-Speed Data GROUP Connectors for Ethernet, Video and High-Speed Data

050-301 SIZE 8 CAVITY OPTO-ELECTRONIC CONTACTS, 100MBPS TO 5GBPS, MMF, 3.3V Front-release, front-insert, front-removable Size Link distances up to 550 meters with multimode #8 OE converter designed for ARINC 600 50/125μm or 62.5/125 μm fiber ARINC 664, 801, 803, 804, and 818 Standard Single 3.3V power supply Compliant ARINC 801 1.25mm ceramic fiber ferrule Data rates from 100Mbps to 5.00Gbps Solutions available in 38999 style connectors Supports Fast and Gigabit Ethernet, AFDX, 1x/2x -40°C to +85°C Operating Case Temperature Fibre Channel, DVI, DHMI, SFPDP, Serial Rapid Evaluation fixtures available 050-301 I/O (sRIO) Radiation Tolerant 100 ohms differential CML inputs with Tx Fault and Tx Disable

050-307 SIZE 8 CAVITY OPTO-ELECTRONIC CONTACTS, 100MBPS TO 5GBPS, MMF, 3.3V Front-release, front-insert, front-removable Size Link distances up to 550 meters with multimode #8 OE converter designed for ARINC 600 50/125μm or 62.5/125 μm fiber ARINC 664, 801, 803, 804, and 818 Standard Single 3.3V power supply Compliant ELIO 2.5mm ceramic fiber ferrule Data rates from 100Mbps to 5 Gbps Solutions available in 38999 style connectors Supports Fast and Gigabit Ethernet, AFDX, 1x/2x Mates with ELIO 2.5mm Termini Fibre Channel, DVI, DHMI, SFPDP, Serial Rapid -40°C to +85°C Operating Case Temperature I/O (sRIO) Evaluation fixtures available 100 ohms differential CML inputs with Tx Fault 050-307 and Tx Disable Compatible with Souriau ELIO AQ6S Quadrax Radiation Tolerant Adapter

050-367 SIZE 8 CAVITY OPTO-ELECTRONIC CONTACTS, 3G-SDI AND HD-SDI, MMF, 3.3V SMPTE EG 34:2004 Compliant to Pathological Industry standard CML input and outputs that Conditions CASE 1, CASE 2 and CASE 3. make for simple integration on customer host Size 8 photonic contacts transmit and receive differential Fast and Gigabit Ethernet, SMPTE ST 297:2015 (3G-SDI & HD-SDI) PCB DVI, HDMI video capable SMPTE 424 Compliant (3G-SDI) Front-release, front-insert, front-removable CML or LVPECL electrical signals over Multimode fiber transmitter and receiver- SMPTE 292 Compliant (HD-SDI) Fits size 8 quadrax cavity for ARINC 600 optic cable. Transmitters consist of a 850nm VCSEL equipped contacts SFP Compatible Electrical Input signal levels Solutions available in 38999 style connectors laser or 1300nm LED with temperature compensation ARINC 664, 801, 803, 850nm VCSEL support 3G-SDI & HD-SDI -40°C to +85°C Operating Case Temperature circuit. Receivers consist of a PIN Photo Detector, a 804 and 818 standard 050-367 Evaluation fixtures available (patented) Transimpedance Amplifier with automatic gain control compliant Link distances up to 550 circuit, and a Limiting Amplifier. meters, multimode Differential output data signals are Single, 3.3 V power supply 050-399 SIZE 8 CAVITY OPTO-ELECTRONIC CONTACTS, DC TO 10 MBPS, MMF, 3.3V LVPECL or CML compatible. For use in ARINC 600 Front-release, front-insert, front-removable Size Link distances up to 2Km and other size #8 cavity- #8 OE converter designed for ARINC 600 Single 3.3V power supply equipped connectors ARINC 664, 801, 803, 804, and 818 Standard ARINC 801 1.25mm ceramic fiber ferrule Patented photonic contacts Current offerings include Compliant integrate into Glenair circular and Solutions available in 38999 style connectors rectangular connectors including 1.25mm ARINC 801 and Data rates from DC to 1 Mbps -40°C to +85°C Operating Case Temperature SuperNine® (D38999 Series III), 2.5mm ELIO® solutions Supports RS232, RS422, and RS485 data rates ARINC 801, ARINC 404, Evaluation fixtures available and others. DC coupled transmitter and receiver 050-399 (patented)

36 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 37 Rev 09.01.20 RUGGEDIZED Small Form-Factor, Harsh- RUGGEDIZED PHOTONIC Environment Photonic Photonic Contacts and Connectors INTERCONNECT Contacts and Connectors SOLUTIONS for Ethernet, Video and High-Speed Data for Box I/O Fiber-to-Copper Media Conversion

Optoelectronic Connector Selection Guide

Optoelectronic Transceiver, MIL-DTL-38999 Type 2.5mm ELIO® Compatible 050-313 100Mbps – 4.25Gbps

D38999 Series III Type Active Receptacle Connector with Glenair Size 8 Optoelectronic Contacts 050-304 050-304 CS Wall Mount, Clinch Nut 050-304 00 Wall Mount, Slotted 050-304 07 Jam Nut Special size #8 cavity adapters 059-0001 - D38999 Size 8 Cavity Adapter Kit (Includes ARINC 801 Style Terminus) facilitate construction of standard fiber optic plug connectors that intermate with size #8 optoelectronic transceiver contacts D38999 Series III Type Active Hybrid Receptacle Connector with Glenair Size 8 Optoelectronic and Electrical Contacts 050-392 050-392 07 Jam Nut 059-0001 - D38999 Size 8 Cavity Adapter Kit (Includes ARINC 801 Style Terminus)

D38999 Series III Type Active Receptacle Connector with Glenair Size 8 Optoelectronic Contacts. 050-355 050-355 CS Wall Mount, Clinch Nut 050-355 00 Wall Mount, Slotted 050-355 07 Jam Nut 059-0001 - D38999 Size 8 Cavity Adapter Kit (Includes ARINC 801 Style Terminus)

D38999 Series III Type Active Hybrid Receptacle Connector with PCB standoffs, Glenair Size 8 Optoelectronic contacts, and electrical contacts 0500-3004 Compatible with 050-301 and 050-367 contacts 059-0001 - D38999 Size 8 Cavity Adapter Kit (Includes ARINC 801 Style Terminus)

Glenair size #8 optoelectronic contacts are easily housed 2.5mm ELIO® solution D38999 Series III Type Active Hybrid Receptacle Connector with Glenair Size 8 Optoelectronic Contacts, and El Ochito Contacts. for multimode Ethernet, 0500-3005 in a range of circular and rectangular connectors for fast/ video, and high-speed 0500-3005 CS Wall Mount, Clinch Nut 0500-3005 00 Wall Mount, Slotted gigabit Ethernet, DVI and HDMI video, and other high-speed data applications 0500-3005 07 Jam Nut data transfer protocols. Special size #8 cavity adapters 1.25mm ARINC 801 are available to enable construction of compatible plug multimode fiber optic D-Sub Active Receptacle Connector with Glenair Size 8 Optoelectronics Contacts. termini solution for Compatible 050-301, 050-367, 050-399, and 0500-3015 contacts 0500-3001 connectors on the cable side. Ethernet, video, and high- 1.25 Gbps – 5.00 Gbps / HD-SDI and 3G-SDI / DC to 50 Mbps speed data Hybrid high-speed Glenair SuperNine layouts with Size #8 D38999 Series D-Sub Active Receptacle Connector with 2 × Glenair Size 8 Optoelectronics Contacts. III type opto- Optoelectronic contacts electronic and Glenair Signature 0500-3024 Compatible 050-301 and 050-367 contacts 1.25 Gbps – 5.00 Gbps connectors El Ochito high-speed populated with size #8 Octaxial contacts contacts, ready for immediate assembly in D-Sub Active Receptacle Connector with 2 × Glenair Size #8 Optoelectronics Contacts. cable or I/O to 0500-3034 Compatible 050-301, 050-367, 050-399, and 0500-3015 contacts circuit board 1.25 Gbps – 5.00 Gbps / HD-SDI and 3G-SDI / DC to 50 Mbps applications

ELIO® is a registered trademark of SOURIAU 38 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 39 RUGGEDIZED RUGGEDIZED PHOTONIC Small Form-Factor, Harsh- Copper-to-Fiber Media Converters INTERCONNECT Environment Copper-To- SOLUTIONS Fiber Media Converters for for Ethernet Applications

Ethernet Applications Block diagram and features

EXAMPLE FUNCTIONAL BLOCK DIAGRAM FOR GLENAIR 050-105 ETHERNET MEDIA CONVERTER

4X #4-40 MOUNTING SCREWS Ø.128±.010 MIN. DEPTH .34" 1.156

1.156

C MAX E MAX

3.000

1.000 D MAX

B MAX

A MAX

O/E Ethernet Fiber Optic Rx PHY & J1 J3 10/100/1000BASE-T SX or LX SERDES Tx

Power, 28VDC Glenair offers small form-factor harsh-environment Reduced form-factor Regulator J2 (5-36V) devices for in-line media converters for in-line and select panel mount conversion of electrical applications, for conversion of 10/100/1000BASE-SX/ and optical signals LX fiber optic gigabit Ethernet data streams to electrical Active cable versions that DATA CABLES • POWER CABLES • TEST CABLES signals servicing switches, routers, and other peripherals. reduce the risk of damage LENGTH (SEE PART NUMBER DEVELOPMENT) TOLERANCE IS: to fiber optic interfaces (+1.80/-0.00) FOR "L" BETWEEN 12.00 TO 60.00 INCHES. (1.00) 3X 1.25mm, 1.58mm, 2.0mm, and 2.5mm ferrule single- and (+3%/-0.00) FOR "L" GREATER THAN 60.00 INCHES. Weight-saving technology CH1 P2 multimode fiber formats supported for virtually every fiber- INTERCON1 RJ45 CABLE (3X), that incorporates power F-GEVP-X-P BRADY LABEL (4X), (1.00) CH2 optic-to-copper application requirement. and signal conversion LAT-18 OR EQ. P3

PART NUMBER functions GLENAIR YYWW 06324 P1 AUX P4 Advanced monitor and

CINCH BANANA PLUG, 108-0303-001 control functions via serial GLENAIR BACKSHELL, 380HS007X1505L4 RTN P5

interface to facilitate GLENAIR CONNECTOR, M22759/11 WIRE (3X) CINCH BANANA PLUG, 233-105-G6X15-35SN 108-0302-001 network management / BIT PWR P6 CINCH BANANA PLUG, 108-0304-001 CH GND P7

MARKER LABEL (3X), (1.00) 3X M23053/5-XXX-0

Data cables, power cables, and fiber optic test cables with EMI/RFI banding and strain relief backshells are available for all Ethernet copper-to-fiber media converters

40 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 41 RUGGEDIZED RUGGEDIZED Copper-to-Fiber Media Converters Copper-to-Fiber Media Converters for Ethernet Applications for Ethernet Applications Product Selection Guide Product Selection Guide

Line Replaceable Unit (LRU) Copper to Fiber Media Converter, Gigabit Ethernet Copper to Fiber Media Converter Single or Dual Channel, Flange Mount 050-101 1000BASE-T to 1000BASE-SX/LX 10/100/1000BASE-T to Fiber Optic Ethernet 050-117 MIL-DTL-38999 Series III signal, power, and fiber optic interfaces (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX) 28VDC (DO-160 Audio Conducted Susceptibility Cat Z), Lightning Strike (DO-160 level 3 waveform 3/3) M38999 (ARINC801), M38999 (Quadrax), M38999 (Power)

10/100/1000BASE-T to 1000BASE-SX In-Line Media Converter Line Replaceable Unit (LRU) Copper to Fiber Media Converter, 050-103 with MIL-DTL-38999 Series III power, signal, and fiber optic interfaces Single or Dual Channel, Flange Mount. All connectors on the same side. 10/100/1000BASE-T to Fiber Optic Ethernet 050-130 (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX) 28VDC (DO-160 Audio Conducted Susceptibility Cat Z), Lightning Strike (DO-160 level 3 waveform 3/3) M38999 (ARINC801), M38999 (Quadrax), M38999 (Power) Copper to Fiber Ethernet Media Converter 050-105 10/100/1000BASE-T to Fiber Optic Ethernet (SX, LX10, EX, FX) Copper to Fiber Single Channel Ethernet Media Converter MIL-DTL-38999 Series III signal, power, and fiber optic interfaces 10/100/1000BASE-T to Single Fiber 1310/1550 Bidirectional Optical Ethernet 050-123 28VDC M38999 (Signal), M38999 (Power), M38999 (Fiber Optic)

Media Converter, Single Channel 050-110 1000BASE-T to 1000BASE-LX10, 18-36VDC, SMF, GFOCA (FO), M38999 (Signal), M38999 Line Replaceable Unit (LRU) Copper to Fiber Media Converter Assembly (Power) 050-129 10/100/1000BASE-T to 100BASE-FX or 1000BASE-SX/LX/EX, 28VDC or USB 5V Bus Power Mighty Mouse connectors for Signal, Power, and fiber

Media Converter, Dual Channel Dual or Single Channel, Panel Mount 10/100/1000BASE-T 050-111 10/100/1000BASE-T to Fiber Optics 050-134 to Fiber Optic Ethernet GFOCA (FO), M38999 (Signal), M38999 (Power) (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX), 28VDC M38999 (Signal and Power), M28876 (Fiber Optic)

Media Converter, Dual or Single Channel, Panel Mount Single Channel, Panel Mount 10/100/1000BASE-T to Fiber Optic Ethernet 10/100/1000BASE-T to Fiber Optic Ethernet 050-112 050-137 (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX), 28VDC (1000BASE-SX/LX10 or 100BASE-FX), 28VDC, M38999 (Signal and Power), GFOCA (Fiber Might Mouse Series 801 (Signal and Power), Pro Beam Mini (Fiber Optic) Optic)

Dual or Single Channel, Panel Mount Media Converter, Dual or Single Channel, Panel Mount 050-138 10/100/1000BASE-T to Fiber Optic Ethernet 10/100/1000BASE-T to Fiber Optic Ethernet (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX), 28VDC 050-113 (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX), 28VDC, M38999 (Signal and Power), M38999 M38999 (Signal and Power), GHD (Fiber Optic) (Fiber Optic) Single or Dual Channel Ethernet + 2 Channels of RS232 (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX) 050-139 Media Converter, Dual or Single Channel, Panel Mount 28VDC (DO-160 Audio Conducted Susceptibility Cat Z), Lightning Strike (DO-160 level 3 waveform 3/3) 050-131 10/100/1000BASE-T to Fiber Optic Ethernet M38999 (ARINC801), M38999 (Quadrax), M38999 (Power), M38999 (RS232) 18 to 36VDC, M38999 (Signal and Power), M83526 (Fiber Optic)

Line Replaceable Unit (LRU) Copper to Fiber Media Converter, Single or Dual Channel, Flange Mount 10/100/1000BASE-T to Fiber Optic Ethernet Media Converter, Dual or Single Channel, Panel Mount 050-143 050-115 10/100/1000BASE-T to CWDM Fiber Optic Ethernet (1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX) 28VDC (DO-160 Audio Conducted 18 to 36VDC, M38999 (Signal and Power), M38999 (Fiber Optic) Susceptibility Cat Z), Lightning Strike (DO-160 level 3 waveform 3/3) M38999 (Fiber Optic), M38999 (Quadrax), M38999 (Power)

42 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 43 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. RUGGEDIZED RUGGEDIZED PHOTONIC Small Form Factor Copper-to-Fiber Media Converters INTERCONNECT Media Converters for SOLUTIONS for Video Applications Harsh-Environment Video Applications Block diagram and features

VIDEO MEDIA CONVERTER FUNCTIONAL BLOCK DIAGRAM

TRANSMITTER RECEIVER Graphics Lasers x 4 PIN/TIA x 4 Card TMDS - Red TRANSMITTER RECEIVER TMDS - Red Source Lasers x 4 PIN/TIA x 4 GraphicsTMDS - Green TMDS - Green Monitor Card TMDS - Red Laser Limiting TMDS - Red TMDS - Blue Drivers Ampliﬁers TMDS - Blue Source TMDS - Data/ClockGreen TMDS - GreenData/Clock Laser Limiting Monitor TMDS - Blue Drivers Ampliﬁers TMDS - Blue TMDS18-36V - Data/Clock TMDS18-36V - Data/Clock Regulation Regulation

18-36V 18-36V Regulation Regulation Fiber optic Cable

R,G,B, Clock Fiberup to 500moptic Cable MMF R,G,B, Clock up to 10km SMF R,G,B, Clock up to 500m MMF R,G,B, Clock Power up to 10km SMF Power

Power Power 050-201-TX 050-201-RX

050-201-TX 050-201-RX

DATA CABLES • POWER CABLES • TEST CABLES

LENGTH (SEE PART NUMBER DEVELOPMENT) TOLERANCE IS: (+1.80/-0.00) FOR "L" BETWEEN 12.00 TO 60.00 INCHES. (1.00) 5X Fiber link up to 500m (+3%/-0.00) FOR "L" GREATER THAN 60.00 INCHES. PICWIRE 75 OHM COAX (4X), Glenair Copper-to-Fiber-Optic Video Media Converters V78209 multimode, 10km CH1 P2 enable extended link distances, improved EMI and PICWIRE BNC PLUG (4X), singlemode 190912 security in harsh environments for both multi- and Standard 1560 and custom singlemode fiber applications including DVI, HDMI, contact arrangements— CH2 P3 SMPTE (SDI, HD-SDI including quadrax and coaxial and 3G-SDI), ARINC P1 CH3 P4 Power supply functions PART NUMBER 818 and more. Units GLENAIR YYWW 06324 with wide input-voltage BRADY LABEL (6X), are available with a ranges LAT-18 OR EQ. (1.00) CH4 P5 GLENAIR BACKSHELL, wide range of Glenair DVI, HDMI, SMPTE, 380HS007X1904L3 ARINC 818 GLENAIR CONNECTOR, and industry-standard 257-606XG6-19Q-18BN Advanced monitor and GLENAIR CONTACTS (4X), AUX P6 electrical and fiber optic 852-083-01 control functions via serial GLENAIR CONTACTS (14X), 850-001-22-348 INTERCON1 RJ45 CABLE, connectors. interface to facilitate F-GEVP-X-P network management / BIT Data cables, power cables, and fiber optic test cables with EMI/RFI banding and strain relief backshells are available for all Video copper-to-fiber media converters

44 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 45 RUGGEDIZED RUGGEDIZED Copper-to-Fiber Media Converters Copper-to-Fiber Media Converters for Video Applications for Video Applications Product Selection Guide Product Selection Guide

DVI Copper to Fiber Media Converter 4-Channel SMPTE HD-SDI Copper to Fiber Media Converter 050-201 with MIL-DTL-38999 power, signal, and fiber optic connectors (DO-160 Lightning Strike, DO-160 Audio Conducted Susceptibility Cat Z) 050-208 D38999 (ARINC801 for Fiber Optic), D38999 (100 ohms Quadrax & Pin contacts for Signal and Service Port), D38999 (Pin contacts for Power) connectors

DVI Extender - Copper to Fiber Media Converter 050-203 with MIL-DTL-38999 power, signal, and fiber optic connectors

Dual DVI Copper to Fiber Media Converter, 28VDC D38999 (Eye-Beam for Fiber Optic) 020-210 D38999 (Quadrax & Pin contacts for Signal, Service Port) D38999 (Pin contacts for Power) connectors

Copper to Fiber DVI Media Converter, 28VDC 050-205 D38999 (ARINC801 for Fiber Optic), D38999 (Quadrax & Pin contacts for Signal, Power and Service Port)

CWDM 4-Channel SMPTE Copper to Fiber Media Converter, 050-211 SMF or MMF, 28VDC GHD Glenair High Density (GHD for Fiber Optic) D38999 (75 Ohms Quadrax & Pin contacts for Signal, Service Port) Dual-DVI Copper to Fiber Media Converter, 28VDC 050-206 D38999 (ARINC801 for Fiber Optic), D38999 (Quadrax & Pin contacts for Signal and Service Port), D38999 (Pin contacts for Power)

DVI Copper to Fiber Media Converter, 28VDC 050-214 4-Channel SMPTE Copper to Fiber Media Converter D38999 (ARINC801 for Fiber Optic), D38999 (Quadrax & Pin contacts for Signal and Service Port), 050-207 HD-SDI and 3G-SDI with MIL-DTL-38999 and Glenair High Density (GHD) D38999 (Pin contacts for Power) power, signal, and fiber optic connectors

46 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 47 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. RUGGEDIZED RUGGEDIZED PHOTONIC Ruggedized Aggregated Signal Aggregation Media Converters INTERCONNECT Signal Copper-to-Fiber SOLUTIONS Block diagram and features Media Converters

SIGNAL AGGREGATOR FUNCTIONAL DIAGRAMS

I/O 1 FO Aggregate, I/O 2 Tx Packetize 1 - 10 GB/sec I/O signal: • ber-optic Digital, analog, single link • video, data Serialize/ • DeSerialize FO Rx I/O N A/D Bonded links up to 40Gbps

Power Or bi-di single- ber Regulator link for slip-ring applications

Signal Aggregation Signal Aggregation Media Converter 2-Fiber Optical Solution Media Converter

FO Tx FO Rx FO Rx FO Tx

many signals many signals on copper on copper

Single Optical Fiber Solution Signal Aggregation Signal Aggregation Media Converter Media Converter 1310 nm Tx Tx 1550 nm One high-speed opto- Glenair signal aggregation media converters integrate a Enables single-port Rx electronic interface can Rx optical rotary joint set of compact optoelectronic modules to digitize and/ serve practically all signal many signals many signals or aggregate multiple common signal types, and combine types on copper on copper them onto high-data-rate serial optical fiber channels. Ideal solution to enable optical rotary joints MOTHERBOARD AND DAUGHTER CARD ARCHITECTURE FOR BROAD SIGNAL COMPATIBILITY -40°C to +85°C operating Featured Signal Aggregation Media Converter temperature range SERIAL VIDEO Aggregation Meets MIL-STD-810 Main Board • RS422/RS485 • DVI Mechanical Shock and • RS232 • HDMI Vibration • USB • SMPTE SDI Copper to Fiber Aggregation Media • MIL-STD-1553 • SMPTE HD-SDI Converter Unique signal-type • CAN Bus • SMPTE 3G-SDI Meets MIL-STD-1344 Daughter Card 050-513 4 Channel RS422/RS485 + 2 Discrete Signals, immersion resistance • ARINC 429 • ARINC 818 with MIL-DTL-38999 Series III power, signal, and • SMBus • VGA fiber optic connectors. Advanced monitor and • I2C control functions via serial • SPI ANALOG interface to facilitate • Ethernet 10/100/1000 • RF/IF Sampling network management / BIT Contact the factory for other signal formats and custom configurations • Analog Sensor Data

48 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 49 RUGGEDIZED RUGGEDIZED PHOTONIC Small Form-Factor Small Form-Factor Electrical and Hybrid INTERCONNECT Electrical and Hybrid SOLUTIONS Opto-Electrical Ethernet Switches Opto-Electrical Ethernet Switches Block diagram and product selection guide

ETHERNET SWITCH EXAMPLE BLOCK DIAGRAM

5-Port Smart Ethernet Switch (Customer Configurable via USB 2.0) 2 Electrical Ports & 3 Fiber optic Ports 050-124 10/100/1000BASE-T, 1000BASE-SX, 1000BASE-LX, 100BASE- FX 28VDC (DO-160 Audio Conducted Susceptibility Cat Z), Lightning Strike (DO-160 level 3 waveform 3/3)

Glenair unmanaged harsh-environment Ethernet Unmanaged—plug and 6-Port Smart Ethernet Switch (Customer Configurable via USB 2.0 Command switches are layer 2 switches with Auto negotiation and play operation—no Line Interface) configuration required 050-128 4 Electrical Ports: 10/100BASE-T & 2 Fiber optic Ports (customer selectable): 100BASE- Auto MDI / MDIX circuitry that enables port expansion FX, 1000BASE-SX, 1000BASE-LX 28VDC (DO-160 Audio Conducted Susceptibility Cat Z), Jumbo frame support in Lightning Strike (DO-160 level 3 waveform 3/3) with IEEE-802.3U 10/100/1000Base-T Ethernet ports. all speeds (10/100/1000 Electronics are incorporated into a ruggedized Mbps) panel-mountable housing Operating temperature sealed against range: -40°C to +85°C 4-Port Ethernet Switch: 2 Electrical Ports & 2 Fiber optic Ports liquid and solid Standard ultraminiature 050-119 Mighty Mouse electrical Panel Mount, 10/100/1000BASE-T, 1000BASE-SX/LS/FX Data cables, power cables, contaminants. and breakout cables with EMI/ and M28876 type fiber RFI banding and strain relief optic connector interfaces backshells are available for all ruggedized Ethernet switches Breakout cables with industry-standard connector interfaces available 7-Port Unmanaged Ethernet Switch 10/100/1000 BASE-T 052-101 With Series 805 Mighty Mouse Connector

50 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 51 COMPLEMENTARY HIGH-SPEED OCTAXIAL HIGH-SPEED ® El Ochito® Contacts ELECTRICAL INTERCONNECTS Protocols, exploded views of Type I and Type II contacts High-Speed Octaxial Contacts For Ethernet, SuperSpeed USB and Multi-Gigabit Datalinks

El Ochito® White El Ochito® Blue El Ochito® Red

1000BASE-T, 10GBASE-T SuperSpeed USB HDMI, DisplayPort, SATA El Ochito® White octaxial contacts Low-dielectric material. 90 ohms. El Low-dielectric material. Up to 5 Gbps. provide 10GbE in a single size #8 contact Ochito® Blue octaxial contacts provide 100 ohms. El Ochito® Red octaxial cavity (compared to two Quadrax) for an aerospace-grade solution for contacts provide an aerospace-grade 100BASE-T solutions. SuperSpeed USB 3.0 solution for multi-gigabit data rates.

El Ochito® Type I Contacts, Non-Serviceable 26 AWG, Crimp Wire Shield Termination Crimp Crimp Ferrule Dielectric Ferrule Sleeve Dielectric Sleeve Socket Contacts Pin Contacts Contact Organizer Insulator Contact Organizer Insulator Front Insulator Spline Spline

Front Insulator Alignment Key Outer Body Series 792 with Outer Body El Ochito octaxial Alignment Key contacts Type I Pin Contact Type I Socket Contact

® 10GbE, SuperSpeed USB, ® High speed, harsh environment El Ochito and multi-gigabit shielded El Ochito Type II Contacts, Serviceable octaxial contacts save size and weight pairs 24-26 AWG, Threaded Wire Shield Termination, Integral Contact Release Sleeve Universal drop-in for in aircraft avionics, weapons systems, keyed size #8 connector Heatshrink Tube Heatshrink Tube cavities Retainer Nut Retainer Nut satellites, radars, and communications Inner Ferrule O-ring Data-pair isolation for Inner Ferrule equipment. optimal signal integrity Socket Contacts Pin Contacts O-ring Contact Organizer Contact Organizer AVAILABLE SIGNATURE CONNECTOR PACKAGING INCLUDES Crimp or threaded shield Insulator Insulator Front Insulator termination contact types Front Insulator Snap-in, rear release Spline Environmentally sealed Spline Aerospace-grade cable Contact Release Sleeve Contact Release Sleeve assemblies Alignment Key Alignment Key 50% cable / contact Outer Body Outer Body reduction compared to SuperFly 806 Mil-Aero SuperNine Quadrax Type II Pin Contact Type II Socket Contact Nanominiature Micro miniature “Better than QPL” 38999

52 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 53 HIGH-SPEED OCTAXIAL HIGH-SPEED OCTAXIAL El Ochito® White Contacts El Ochito® Blue and Red Contacts How To Order How To Order

El Ochito® Contacts: How To Order El Ochito® Contacts: How To Order

Data Protocol: 10G Ethernet El Ochito® White Data Protocol: SuperSpeed USB El Ochito® Blue Cable El Ochito® Type I El Ochito® Type II Wire Cable Cable El Ochito® Type I Connector Type Glenair Part No. Cable Pin Contact Skt Contact Pin Contact Skt Contact Wire Size Type Connector Type Cable Type Pin Contact Socket Contact (Mfgr. P/N) Dia. Assembly Instr. Assembly Instr. Assembly Instr. Assembly Instr. Size Glenair Part No. Cable Dia. Assembly Instr. Assembly Instr. .220 858-009-01 858-010-01 S/UTP 963-003-26 Commercial Grade . 217 858-047-01F 858-048-01F (PIC E6A3826) (5.56) 963-118 AI85074-01 AI85074-01 (PVC Jacket) (5.51) AI85114-02 AI85114-02 Series 792 ARINC 600 26 26 and 806 963-033-26 .220 858-009-02 858-010-02 Aerospace Grade .236 S/FTP 963-110 858-047-02F 858-048-02F (Gore RCN9047-26) (5.56) AI85084-01 AI85084-01 (Fluoropolymer Jacket) (5.99) AI85090-01 AI85090-01

963-037-24 .260 858-005-03 858-006-03 ® Commercial Grade . 217 S/UTP Series 23 SuperNine 963-118 858-028-01F 858-029-01F (6.60) AI85097-03 AI85097-03 (PVC Jacket) (5.51) AI85114-02 AI85114-02 Series 23 Series 801 and 805 Mighty ® 24 26 SuperNine Mouse 963-033-24 .260 858-005-04 858-006-04 Aerospace Grade .236 858-028-02F 858-029-02F S/FTP Series 28 HiPer-D® 963-110 Series 801 (6.60) AI85097-04 AI85097-04 (Fluoropolymer Jacket) (5.99) AI85090-01 AI85090-01 and 805 Mighty Mouse .220 858-003-01F 858-004-01F 858-005-01 858-006-01 Commercial Grade . 217 858-038-01 858-035-01 S/UTP 963-003-26 963-118 (PIC E6A3826) (5.56) AI85048-01 AI85048-01 AI85097-01 AI85097-01 (PVC Jacket) (5.51) AI85124-01 AI852124-01 Series 28 26 ARINC 600 26 ® HiPer-D .220 858-003-02F 858-004-02F 858-005-02 858-006-02 Aerospace Grade .236 858-038-02 858-035-02 S/FTP 963-033-26 963-110 (Gore RCN9047-26) (5.56) AI85048-02 AI85048-02 AI85097-01 AI85097-01 (Fluoropolymer Jacket) (5.99) AI85124-02 AI85124-02

963-037-24 .260 858-043-03 858-042-03 (PIC E6A3824) (6.60) AI85134-03 AI85134-03 Data Protocol: HDMI/SATA/DisplayPort/General High-Speed 24 El Ochito® Red 963-033-24 .260 858-043-04 858-042-04 (Gore RCN9047-24) (6.60) AI85134-04 AI85134-04 Cable El Ochito® Type I Series 792 Connector Type Wire Cable Type .220 858-045-01F 858-046-01F 858-043-01 858-042-01 Size Pin Contact Socket Contact S/UTP 963-003-26 Glenair Part No. Cable Dia. (PIC E6A3826) (5.56) AI85048-01 AI85048-01 AI85134-01 AI85134-01 Assembly Instr. Assembly Instr. 26 Series 792 1Gb/s and above 858-049-01F* 858-050-01F* 963-033-26 .220 858-045-02F 858-046-02F 858-043-02 858-042-02 .299 (7.59) S/FTP and 806 963-122-X* AI85048-02 AI85048-02 (Gore RCN9047-26) (5.56) AI85048-02 AI85048-02 AI85134-02 AI85134-02 Series 23 SuperNine® .260 858-051-03 858-052-03 Series 801 and 805 Mighty 4 Pair Up to 1Gb/s S/UTP 963-037-24 26 .220 (5.56) 858-030-02F* 858-031-02F* (PIC E6A3824) (6.60) AI85149-03 AI85149-03 Mouse S/FTP 963-033-26 AI85048-02 AI85048-02 ® 24 Series 28 HiPer-D 963-033-24 .260 858-051-04 858-052-04 HDMI/Display Port S/FTP .429 (10.9) 858-039-01 858-037-01 (Gore RCN9047-24) (6.60) AI85149-04 AI85149-04 ARINC 600 963-120-X* .330 (8.38) AI85084-01 AI85084-01 Series 806 963-127-X* 963-003-26 .220 858-045-01F 858-046-01F 858-051-01 858-052-01 S/UTP Series 792 858-049-02 858-050-02 (PIC E6A3826) (5.56) AI85048-01 AI85048-01 AI85149-01 AI85149-01 and 806 AI85084-02 AI85084-02 26 ® 963-033-26 .220 858-045-02F 858-046-02F 858-051-02 858-052-02 Series 23 SuperNine S/FTP SATA (Gore RCN9047-26) (5.56) AI85048-02 AI85048-02 AI85149-02 AI85149-02 Series 801 and 805 Mighty Parallel Pair .116 x .071 858-030-03 858-031-03 26 963-043-26 Mouse Twinax (2.95 x 1.80) AI85084-03 AI85084-03 ® [2 pcs.] .220 858-014-02F 858-015-02F Series 28 HiPer-D S/UTP 963-003-26 (PIC E6A3826) (5.56) AI85099-01 AI85099-01 858-039-02 858-037-02 EPXB 26 ARINC 600 AI85084-02 AI85084-02 .220 858-014-01F 858-015-01F S/FTP 963-033-26 (Gore RCN9047-26) (5.56) AI85105-01 AI85105-01 * Omit F when using this cable

54 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 55 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. COMPLEMENTARY HIGH-SPEED HIGH-SPEED Series 792 ELECTRICAL The Next-Generation Micro INTERCONNECTS Miniature Rectangular Connector The next-generation micro miniature rectangular for With El Ochito Contacts For High- high-speed aerospace applications Speed Aerospace Applications

DESCRIPTION REQUIREMENT PROCEDURE / NOTES DESCRIPTION REQUIREMENT PROCEDURE / NOTES Operating Shell-to-shell -65° to +175°C EIA-364-32 Test Condition IV 2.5 millivolt maximum EIA-364-83 temperature resistance 1.5 Amps (datalink contacts) Datalink contacts tested: Frequency Attenuation dB Current rating 5 Amps (Size #23 contacts) El Ochito® White 100 75 Shielding 1000 50 750 VAC (Size #23 contacts) EIA-364-66 DWV (sea level) EIA-364-20 effectiveness 3000 44 1000 VAC (datalink contacts) 6000 38 Insulation 5000 MΩ minimum EIA-364-21 10000 35 resistance Ingress IP67 rating IEC-60529 Contact EIA-364-06, 1.0 A test current, protection 55 millivolt maximum resistance, 25°C #24 AWG wire

Insert Arrangements

A1 A1 A2 A1 A2 1 A1

2 1 4 2 A-1W1 • A-1G1* A-3W1 B-2W2 • B-2G2* B-6W2 B-23W1 1 #8 1 #8 / 2 #23 2 #8 2 #8 / 4 #23 1 #8 / 22 #23

A3 A1 A3 2 11 A1

6 3 C-3W3 • C-3G3* C-9W3 C-24W2 3 #8 3 #8 / 6 #23 2 #8 / 22 #23

A4 A1 A4 3 1 A1

8 4 D-4W4 • D-4G4* D-12W4 D-27W3 The Series 792 connector brings high-speed 4 #8 4 #8 / 8 #23 3 #8 / 24 #23

4 1 data-rate performance to the Glenair Series A5 A1 A5 A1 79 rectangular family. Size 8 cavities accept 10 5 standard Quadrax or El Ochito® shielded High-speed Ethernet, USB E-5W5 • E-5G5* E-15W5 E-48W3 3.0, HDMI, and DisplayPort 5 #8 5 #8 / 10#23 3 #8 / 45#23 octaxial contacts making it a PCB-mount and cable 5 1 connectors A4 A1 perfect choice for radars, A4 A1 Scoop-proof interface 10 6 16 11 weapons systems, 12 arrangements and 6 A9 A5 A9 A5 shell sizes 22 mission computers 17 Precision-machined dual- and displays, lobe polarized shells F-9W9 • F-9G9* F-31W9 9 #8 9 #8 / 22#23 communications Environmentally sealed Contact Key * Grounded gear, and more. Integrated EMI shielding Size #8 aluminum and grounding insert Blind mating Size #23

56 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 57 HIGH-SPEED HIGH-SPEED Series 792 Series 792 The next-generation micro miniature rectangular for The next-generation micro miniature rectangular for high-speed / high-data rate aerospace applications high-speed / high-data rate aerospace applications

Cable Connectors Panel Mount Connectors Float Mount Connectors Save Size and Weight with Series 792 Connectors Snap-in crimp contacts Snap-in crimp contacts Snap-in crimp contacts The Multi-Port Multi-Protocol Connector with El Ochito® Contacts Plug Receptacle Plug Receptacle Plug Receptacle

About The Series 792 he Series 792 brings high-speed 792-001 792-002 792-003 792-004 792-013 792-014 Tboard-to-wire capability to the Glenair Series 79 family of ultraminiature Twinax, Quadrax and El Ochito® El Ochito® Printed Circuit Board Connectors with Octaxial Contacts rectangular connectors. The Series 792 Connectors are available in three Epoxy-sealed non-removable PCB terminals is intended for avionics and aerospace configurations: twinax for a single equipment exposed to high-vibration high-speed wire pair, quadrax for two Straight PCB Panel Mt Straight PCB 90° PCB Panel Mount 90° PCB and hostile environments. data pairs, and El Ochito® for four data Plug Receptacle Plug Receptacle Plug Receptacle Plug Receptacle Up to 9 data ports The 792 supports quadrax contacts pairs. for ARINC 664 and El Ochito® octaxial The Series 792 Size F with nine ports is contacts for 10Gb Ethernet, USB 3.0, the largest connector in the series and HDMI and other protocols. is the only two row version. Sizes A – E, with one to five ports, are single row. Machined aluminum alloy shells feature dual lobes for polarization. Pin contacts 792-005 792-006 792-007 792-008 792-009 792-010 792-011 792-012 are recessed to prevent scooping damage. Crimp contacts conform to M39029 Quadrax Printed Circuit Board Connectors requirements and are rear release. Epoxy-sealed non-removable PCB terminals An optional ground spring in the PCB Connectors Straight PCB Panel Mt Straight PCB 90° PCB Panel Mount 90° PCB receptacle minimizes EMI. Fluorosilicone Series 792 PCB connectors have face seals and wire grommets protect straight or right angle PC tails. Plug Receptacle Plug Receptacle Plug Receptacle Plug Receptacle from moisture and contamination. Contacts are non-removable and are Panel Mount Panel mount versions are available epoxy sealed. Right-angle connectors Panel mount connectors have an O-ring with an O-ring—or for improved panel eliminate the need for board-to-panel and threaded mounting holes for easy bonding—a metal spring. I/O jumpers. installation. Suitable for blind mate Board mount versions include straight modules, the Series 792 is available or right angle terminals. Right angle PCB with guide pins and float mounts. 792-018 792-019 792-020 792-021 792-022 792-023 792-024 792-025 connectors feature an aluminum cover for added EMI protection. Series 792 High-speed Ultraminiature RECOMMENDED BACKSHELL Rectangular Connectors with El Ochito® Metal EMI Panel Spring El Ochito® El Ochito® El Ochito® Octaxial Contacts White Blue Red 10GbE, SuperSpeed USB, and multi- A gold-plated panel spring option is available for Series 792 connectors GbE USB 3.0 HDMI, SATA, gigabit shielded pairs with panel mount flanges. This spring 10GbE DisplayPort Crimp shield termination and provides improved electrical bonding. El Ochito® Contacts threaded contact types Series 792 connectors feature El Cable Connectors Snap-in, rear release Ochito® octaxial contacts for Ethernet, Quadrax and El Ochito® contacts snap El Ochito® El Ochito® El Ochito® Environmentally protected SuperSpeed USB, HDMI, DisplayPort, into Series 792 cable connectors and White Blue Red Aerospace-grade performance SATA and other multi-gigabit protocols. are easily removed with a standard GbE USB 3.0 HDMI, SATA, 799-164 Multiple protocols can be supported in plastic tool. Alignment keys provide 10GbE DisplayPort Split EMI Banding Backshell a single multi-port connector. correct orientation.

58 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 59 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. COMPLEMENTARY 806 Mil-Aero: Advanced HIGH-SPEED HIGH-SPEED SERIES Performance, Reduced Series 806 Mil-Aero ELECTRICAL Size and Weight INTERCONNECTS 806 Micro Miniature Circular Connectors Connector Series IAW ® MIL-AERO MIL-DTL-38999 with El Ochito octaxial contacts

Series 806 with El Ochito® contact arrangements

Contact Key 18 19 1 2 1 13 15 6 17 A A B A 3 A B 16 19 4

15 5

6 14

7 20 13 El Ochito® Size 12 8 18 16 Size #8 #22HD 11 10 9 21 7 Octaxial

Insert Arrangement 10-1 14-20A 16-2 16-22 No. of Contacts 1x #8 1x #8 19x #22HD 2x #8 2x #8 20x #22HD

1 4 1 4 A B A 17 B Contact Key A B A 13 14 B

16 5 21 18 24 22 12 C D C D C 18 C 15 5 20 23 El Ochito® Size 13 8 Size #8 #22HD 17 16 19 Octaxial 9 8 12 9

Insert Arrangement 18-3 18-21 20-4 20-28 No. of Contacts 3x #8 3x #8 18x #22HD 4x #8 4x #8 24x #22HD

44 1 A B 40 A B 1 6 45 51 25 26 74 76 A B A B Contact Key 73 52 G 86 24 33 7 C H 85 37 90 77 32 27 E C 10 36 40 38 34 89 93 91 87 C D C D 31 39 28 D 92 F 83 El Ochito® Size D 79 19 Size #8 #22HD 35 12 E 67 88 58 Octaxial 30 30 29 66 82 80 59 18 13

Insert Arrangement 22-5 22-44 24-8 24-97 No. of Contacts 5x #8 4x #8 40x #22HD 8x #8 4x #8 93x #22HD Series 806 meets key performance benchmarks for Polarizing Positions FEATURES harsh vibration, shock, and Position A° B° C° D° A 105 140 215 265 • Triple-start stub ACME mating thread environmental settings—as well as B 102 170 248 305 • El Ochito® Octaxial and hybrid High density #22HD arrangements for reduced size / weight high-altitude, unpressurized aircraft Next-generation micro C 80 150 230 295 and high-speed performance miniature aerospace- D 68 140 205 275 • Aerospace-grade materials, construction, and performance zones with aggressive voltage ratings Series 806 with four grade circular connector E 64 155 234 304 10GbE El Ochito F 72 120 200 298 CONNECTOR CONSTRUCTION and altitude immersion standards. channels Upgraded environmental, electrical and mechanical • Shell and coupling nut: aluminum or stainless steel ® • Contacts: copper alloy, gold plating SERIES 806 MIL-AERO CONNECTORS WITH EL OCHITO CONTACTS performance IAW RECOMMENDED BACKSHELL 10GbE, SuperSpeed USB 3.0, • Wire grommet: fluorosilicone MIL-DTL-38999 Series III • Dielectric inserts: high grade rigid dielectric HDMI and DisplayPort Integrated anti- • Peripheral seal: fluorosilicone Crimp shield termination and decoupling technology • Ground spring: copper alloy, nickel plating threaded contact types • Contact retention clips: copper alloy High-Speed El Ochito® • Ratchet springs: stainless steel, passivated White Blue Red Snap-in, rear release and hybrid #22HD • Retainer rings: stainless steel, passivated GbE USB 3.0 HDMI, SATA, • Clinch nuts: stainless steel, passivated 10GbE DisplayPort Environmentally protected contact arrangements 627-259 Swing-Arm 3-in-1 strain relief with cable bushing (consult factory)

60 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 61 HIGH-SPEED HIGH-SPEED Series 806 Mil-Aero Series 806 Mil-Aero Micro Miniature Circular Connectors Micro Miniature Circular Connectors with El Ochito® octaxial contacts with El Ochito® octaxial contacts

How To Order Series 806 El Ochito® Plugs How To Order Series 806 El Ochito® Jam Nut Receptacles SAMPLE PART NUMBER 806-012 -ME 18-3 S M A SAMPLE PART NUMBER 806-020 -MT 18-21 P B A Product 806-012 = Cable Plug Product 806-020 = Jam Nut Receptacle ME = Aluminum, Electroless Nickel ME = Aluminum, Electroless Nickel Shell Material and MT = Aluminum, Ni/PTFE Shell Material and MT = Aluminum, Ni/PTFE ZR = Aluminum, Black Zinc-Nickel ZR = Aluminum, Black Zinc-Nickel Finish Finish NF = Aluminum, Olive Drab Cadmium NF = Aluminum, Olive Drab Cadmium Nano Band Platorm Z1 = Stainless Steel, Passivated Metric Accessory Thread Z1 = Stainless Steel, Passivated Arrangement Number Arrangement Number See Contact Arrangements Table See Contact Arrangements Table (Shell Size - Insert Arr.) (Shell Size - Insert Arr.) Contact Type P = Pin S = Socket Contact Type P = Pin S = Socket M = Metric accessory threads M = Metric accessory threads Shell Style Shell Style B = Nano Band platform B = Nano Band platform Metric Accessory Thread Polarizing Position A B C D E F Nano Band Platorm Polarizing Position A B C D E F

How To Order Series 806 El Ochito® Square Flange Receptacles Table VI - Ochito Contact Positions How To Order Series 806 El Ochito® PCB Receptacles SAMPLE PART NUMBER 806-013 -MT 18-21 P B C A B = Blue, R = Red, W = White SAMPLE PART NUMBER 806-039 -MT 14 E – 18-21 P A 806-013 = Panel Receptacle, El Ochito Contact Designator 806-039 = Jam Nut Product SYM Product Square Flange, Crimp A B C D E F G H 806-040 = Square-Flange ME = Aluminum, Electroless Nickel E W W W W W W W W ME = Aluminum, Electroless Nickel MT = Aluminum, Ni/PTFE E2 B W W W W W W W Shell Material and Shell Material and MT = Aluminum, Ni/PTFE ZR = Aluminum, Black Zinc-Nickel E3 R W W W W W W W ZR = Aluminum, Black Zinc-Nickel Metric Accessory Finish Thread NF = Aluminum, Olive Drab Cadmium E4 B B W W W W W W Finish NF = Aluminum, Olive Drab Cadmium Z1 = Stainless Steel, Passivated E5 R B W W W W W W E6 R R W W W W W W Z1 = Stainless Steel, Passivated Arrangement Number E7 B B B W W W W W Shell Size 10, 14, 16, 18, 20, 22, 24 See Contact Arrangements Table (Shell Size - Insert Arr.) E8 R B B W W W W W E9 R R B W W W W W Contact Type See Table VI Contact Type P = Pin S = Socket E10 R R R W W W W W Ground Option G = Common Ground – = None M = Metric accessory threads E11 B B B B W W W W Shell Style Contact Arrangement B = Nano Band platform E12 R B B B W W W W See Contact Arrangements Table Nano Band Platorm E13 R R B B W W W W Number T = Thru holes Mounting Hole Style E14 R R R B W W W W Contact Gender P = Pin S = Socket C = Clinch nut, #4-40 (rear panel mounting) E15 R R R R W W W W (for 806-040 square-flange only) Polarizing Position A B C D E F E16 B B B B B W W W Panel Mount E17 R B B B B W W W T = Thru-Hole C = Clinch Nuts for Rear Panel Mount Thru-Hole Style E18 R R B B B W W W Omit for 806-039 Jam Nut E19 R R R B B W W W E20 R R R R B W W W Polarizing Position A B C D E F E21 R R R R R W W W E22 B B B B B B W W E23 R B B B B B W W E24 R R B B B B W W E25 R R R B B B W W How To Order Series 806 El Ochito® In-Line Receptacles E26 R R R R B B W W SAMPLE PART NUMBER 806-019 -MT 18-21 P B A E27 R R R R R B W W E28 R R R R R R W W Product 806-019 = In-Line Receptacle E29 B B B B B B B W ME = Aluminum, Electroless Nickel E30 R B B B B B B W E31 R R B B B B B W Shell Material and MT = Aluminum, Ni/PTFE E32 R R R B B B B W ZR = Aluminum, Black Zinc-Nickel Metric Accessory Thread Finish E33 R R R R B B B W NF = Aluminum, Olive Drab Cadmium E34 R R R R R B B W Z1 = Stainless Steel, Passivated E35 R R R R R R B W Jam-Nut Suare-Flange Arrangement Number E36 R R R R R R R W See Contact Arrangements Table E37 B B B B B B B B (Shell Size - Insert Arr.) E38 R B B B B B B B Contact Type P = Pin S = Socket E39 R R B B B B B B E40 R R R B B B B B M = Metric accessory threads Shell Style E41 R R R R B B B B B = Nano Band platform E42 R R R R R B B B Nano Band Platorm Polarizing Position A B C D E F E43 R R R R R R B B E44 R R R R R R R B E45 R R R R R R R R

62 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 63 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. COMPLEMENTARY High-Speed Micro-D: HIGH-SPEED HIGH-SPEED Smallest and Lightest Micro-D ELECTRICAL Aerospace-Grade INTERCONNECTS The miniature high-speed connector with mil-spec pedigree High-Speed Connector Solution connector and contact packaging

SUPPORTED HIGH-SPEED PROTOCOLS Shell Sizes and contact arrangements optimized for today’s popular high-speed protocols

21 21 25 21 Display Port HDMI DVI-D DVI-D 1.2 2.0 Dual Single

9 15 9 15 Up To: Cat 6A eSATA/SATA 3 USB 3.0 USB 2.0 (10GBASE-T)

Micro-D High-Speed configurations High-Speed Micro-D contact arrangements high-speed signal pair include wired assemblies and face view pin connector signal-pair drain wire straight or 90° PCB-mount low-speed signal or power contacts connectors. Insert arrangements feature 1 Amp Nanominiature

TwistPin contacts. Hybrid 1Amp/ 1234 5 12345678 12345678910 11 12345678 910 11 12 13 3Amp arrangements for USB 3.0 SuperSpeed are also available. All designs have been tested for today’s 6789 9 10 11 12 13 14 15 12 13 14 15 16 17 18 19 20 21 14 15 16 17 18 19 20 21 22 23 24 25 popular high-speed protocols. 9 pin 15 pin 21 pin 25 pin (2 high-speed (2 high-speed (4 high-speed (4 high-speed EMI SHIELDING AND signal pairs) signal pairs) signal pairs) signal pairs) ENVIRONMENTAL SEALING 12345678 910 11 12 13 14 15 16 12345678 910 11 12 13 14 15 16 17 18 19

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 31 pin 37 pin The High-Speed Micro-D is a 1 Amp pre- Pre-wired factory cordsets (8 high-speed signal pairs) (8 high-speed signal pairs) and PCB connectors 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 wired cable and PCB solution with 10+ Unique contact isolation and spacing for optimal 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 51 pin (special 2 row) Gb/sec. performance per differential pair. high-speed performance Silicone Gasket (12 high-speed signal pairs) Auxiliary EMC ground springs on plug and Standard layouts support Ground 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 integral contact separation maximum #28 AWG wire Spring Plug connectors feature a gold-plated 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 Ultra-low dielectric stainless steel ground spring for EMI architecture ensures material combined with protection, and a silicone gasket for 67 pin optimized contact size and environmental sealing. (16 high-speed signal pairs) data integrity and spacing MATERIALS AND FINISHES PERFORMANCE SPECIFICATIONS low attenuation Precision-machined shells Connector Shell: Aluminum Alloy 6061 Current Rating: 1 Amp* with gold or nickel plating Insulator: Polyphenylene Sulfide (PPS) DWV: 600 VAC Sea Level performance. Hybrid contact solutions Flange Seal: Fluorosilicone Rubber, Blue Insulation Resistance: 5000 Megohms Minimum (500 VDC) available with 3 amp and Pin Contact: Copper Alloy, Gold over Nickel Plating Contact Resistance: 80 Milliohms Maximum High-Speed Micro-D connectors and cables are Socket Contact: Copper Alloy, Gold over Nickel Plating Operating Temperature: -55°C To 125°C optimized for high-speed digital datalink protocols with 1 amp TwistPin contacts Ground Spring: Stainless Steel, Gold Plating Mating Force: (7 Ounces) X (# of 1 Amp Contacts)** machined-shell packaging, low attenuation contact (perfect for USB 3.0 Hardware: 300 Series Stainless Steel, Passivated Durability: 500 Mating Cycles spacing, and ultra low PPS dielectric insulators. SuperSpeed applications) Epoxy Resin Hysol EE4215 and Stycast 2850FT/Catalyst 11 *Contact factory for custom configurations supporting up to 3 Amps. **Add (10 Ounces) X (# of 3 Amp Contacts) for mating force for configurations with 3 Amp contacts

64 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 65 HIGH-SPEED HIGH-SPEED Micro-D Micro-D How-to-order How-to-order GHSM Shielded Cable Assembly Connectors GHSM-BSS Board Straight Surface Mount Connectors

How To Order High-Speed Micro-D Wired Connectors How To Order High-Speed Micro-D Board Straight Surface Mount Connectors Sample Part Number GHSM 2 R -31 P -A 8 J 1 -18 L A Sample Part Number GHSM 2 R -25 S BSS PU Series GHSM = Glenair High-Speed Micro-D Series GHSM = Glenair High-Speed Micro-D Shell Finish 2 = Nickel 5 = Gold Shell Finish 2 = Nickel 5 = Gold Insulator Material R = PPS Insulator Material R = PPS Contact Layout 9, 15, 21, 25, 31, 37, 51-2, 67 Contact Layout 9, 15, 21, 25, 31, 37, 51-2, 67 P = Pin (Single-End Plug) S = Socket (Single-End Receptacle) Contact Type P = Pin (Plug) S = Socket (Receptacle) GP = Double-End Cable, Pin Connectors Both Ends Contact Type Termination Type BSS = Board Straight Surface Mount GS = Double-End Cable, Socket Connectors Both Ends Rear Panel Jackpost with Threaded Insert CS = Double-End Cable, Pin and Socket PN = Extended Jackpost for .062" PCB Jackpost Option R2U = .032" Panel R3U = .047" Panel RN = Extended Jackpost for .196" PCB A = Glenair Cable 963-043-26 (100 Ohm, +105°C Max) (see table below) R4U = .062" Panel R5U = .094" Panel High Speed Cable Type PU = Short Jackpost and Threaded Insert B = Glenair Cable 963-129-28 (90 Ohm) R6U = .125" Panel R7U = .080" Panel Discrete Wire Gage (AWG) 8 = #28 0 = #30 (J Wire Type only) Discrete Wire Type K = M22759/11 600 VRMS Teflon (TFE) J = M22759/33 600 VRMS Modified Cross-Linked Tefzel (ETFE) Discrete Wire Color 1 = White 7 = Ten Color Repeating Wire Length Wire Length in Inches, 6 Inch Minimum Mounting Hardware1 L, M, P, S, (See Mounting Hardware Designations table below) .294 X - ArmorLite Braided Microfilament Stainless Steel shield with E-CTFE Halar “Expando” Jacket W - ArmorLite Braided Microfilament Stainless Steel shield Z - 75% Braided AmberStrand shield with E-CTFE Halar “Expando” Jacket V - 75% Braided AmberStrand shield Shield and Jacket Option SKT 1 PIN 1 T - 100% Braided AmberStrand shield with E-CTFE Halar “Expando” Jacket S - 100% Braided AmberStrand shield .008 ± .005 TYP C - Braided shield (Nickel Over Copper) with E-CTFE Halar “Expando” Jacket A - Braided shield (Nickel over Copper) PRELOAD N - No Shield, No Jacket (customer to install) 1 - Hardware is always required to ensure connector pair is fully mated when installed

WIRE LENGTH +1.0/-0.0

.355 .324 .310 MAX .025 WASHOUT

28 AWG WIRE (Ø.013)

.093 .645 WIRE LENGTH +1.0/-0.0 BACK-TO-BACK CABLE ASSEMBLY

Jackpost Options

Mounting Hardware Designations PANEL THICKNESS

#2-56 UNC-2A

PN .595/.565 RN .160 MIN LOCKWASHER .160 MIN .685/.655

#2-56 UNC-2B #2-56 UNC-2B HEX NUT THREADED INSERT THREADED INSERT L P M S PU RU Hex Head Jackscrew, Non- PN/RN Jackpost Hex Head Jackscrew Slot Head Jackscrew Short Jackpost with Rear Panel Jackpost with Removable Extended Jackpost Threaded Insert Threaded Insert

66 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 67 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. HIGH-SPEED HIGH-SPEED Micro-D Micro-D How-to-order How-to-order GHSM-HBR Hybrid Board Right-Angle connectors GHSRPM Rear-Panel Mount Cable Assembly Connectors

How To Order High-Speed Micro-D Hybrid Board Right Angle Connectors How To Order High-Speed Micro-D Wired Connectors Sample Part Number GHSM 2 R -25 S HBR P T -.110 Sample Part Number GHSRPM 2 R -31 P -A 8 J 1 -18 R3 N Series GHSM = Glenair High-Speed Micro-D Series GHSRPM = Glenair High-Speed Micro-D, Rear Panel Mount Shell Finish 2 = Nickel 5 = Gold Shell Finish 2 = Nickel 5 = Gold Insulator Material R = PPS Insulator Material R = PPS Contact Layout 9, 15, 21, 25, 31, 37, 51-2, 67 Contact Layout 9, 15, 21, 25, 31, 37, 51-2, 67 Contact Type P = Pin (Plug) S = Socket (Receptacle) Contact Type P = Pin (Plug) S = Socket (Receptacle) Termination Type HBR = Hybrid Board Right Angle A = Glenair Cable 963-043-26 (100 Ohm, +105°C Max) High Speed Cable Type P = Jackpost Jackposts for Rear Panel Mounting B = Glenair Cable 963-129-28 (90 Ohm) Jackpost Option L = Hex Head Jackscrew (non-removable) R1 = .032" Panel R2 = .047" Panel Discrete Wire Gage (AWG) 8 = #28 0 = #30 (J Wire Type only) (see table below) R3 = .062" Panel R4 = .093" Panel Discrete Wire Type K = M22759/11 600 VRMS Teflon (TFE) J = M22759/33 600 VRMS Modified Cross-Linked Tefzel (ETFE) R5 = .125" Panel R6 = .080" Panel Discrete Wire Color 1 = White 7 = Ten Color Repeating = Threaded Insert in Board Mounting Hole Omit for Thru-Hole Threaded Insert Option T Wire Length Wire Length in Inches, 6 Inch Minimum Right-Angle Lead Length -.080, -.110, -.140, -.172 (Length in Inches ±.015) R1 = .032" Panel R2 = .047" Panel Mounting Hardware R3 = .062" Panel R4 = .093" Panel R5 = .125" Panel R6 = .080" Panel O-Ring Material C = Conductive N = Non-Conductive (Nitrile)

.150 WIRE LENGTH +1.0/-0.0 .295

.442 .480 .025 WASHOUT SKT 1 28 AWG WIRE (Ø.013) PIN 1 LEAD LENGTH ± .015 .008 ± .005 TYP PRELOAD .093 PANEL THICKNESS

.270 .580 .420

.175

2X Ø .096±.003 MOUNTING HOLES OR #2-56 INSERT, AS REQUIRED

Mounting Hardware Designations

PANEL THICKNESS

.100 MIN SCREW CLEARANCE

#2-56 INSERT W/ OR W/O W/ OR W/O ONLY INSERT INSERT (NO THRU .050 OPTION) HEX KEY R1 thru R6 P L Jackposts for Rear Panel Mounting Jackpost Hex Head Jackscrew (non-removable)

68 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 69 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. HIGH-SPEED HIGH-SPEED Micro-D Micro-D How-to-order How-to-order GHSRPM-BSS Rear-Panel Board Straight Surface Mount connectors GHSRPM-HBR Rear-Panel Hybrid Board Right-Angle Connectors

How To Order High-Speed Micro-D Board Straight Surface Mount Connectors How To Order High-Speed Micro-D Hybrid Board Right Angle Connectors Sample Part Number GHSRPM 2 R -25 P BSS R3 N Sample Part Number GHSRPM 2 R -25 P HBR R3 T N -.110 Series GHSRPM = Glenair High-Speed Micro-D, Rear Panel Mount Series GHSRPM = Glenair High-Speed Rear-Panel Micro-D Shell Finish 2 = Nickel 5 = Gold Shell Finish 2 = Nickel 5 = Gold Insulator Material R = PPS Insulator Material R = PPS Contact Layout 9, 15, 21, 25, 31, 37, 51-2, 67 Contact Layout 9, 15, 21, 25, 31, 37, 51-2, 67 Contact Type P = Pin (Plug) S = Socket (Receptacle) Contact Type P = Pin (Plug) S = Socket (Receptacle) Termination Type BSS = Board Straight Surface Mount Termination Type HBR = Hybrid Board Right Angle R2U = .032" Panel R3U = .047" Panel R1 = .032" Panel R2 = .047" Panel Rear Panel Mount Rear Panel Mount R4U = .062" Panel R5U = .094" Panel R3 = .062" Panel R4 = .093" Panel Hardware Option Hardware Option R6U = .125" Panel R7U = .080" Panel R5 = .125" Panel R6 = .080" Panel O-Ring Material C = Conductive N = Non-Conductive (Nitrile) Threaded Insert Option T = Threaded Insert in Board Mounting Hole Omit for Thru-Hole O-Ring Material C = Conductive N = Non-Conductive (Nitrile) Right-Angle Lead Length -.080, -.110, -.140, -.172 (Length in Inches ±.015) .093 .160 MIN

.093 #2-56 UNC-2B THREADED INSERT .480

.150

.480 .320

SKT 1 PIN 1 .008 .005 TYP PRELOAD

PANEL .025 THICKNESS WASHOUT SKT 1 28 AWG WIRE (Ø .013) PIN 1 LEAD LENGTH ± .015 .008 ± .005 TYP PRELOAD

PANEL THICKNESS .420 .294

.025 WASHOUT 28 AWG WIRE (Ø .013) .270 .420

.175

2X Ø .096 ± .003 MOUNTING HOLES OR #2-56 INSERT, AS REQUIRED

70 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 71 Dimensions in Inches (millimeters) are subject to change without notice. Dimensions in Inches (millimeters) are subject to change without notice. HYBRID RUGGEDIZED ELECTRICAL / Hybrid Hybrid Electrical / Hybrid Electrical / Optical Connectors OPTICAL Optical Connectors SOLUTIONS Product showcase ELECTRICAL for Special Applications

Harsh-environment marine bronze jam-nut connector, hybrid Harsh-environment marine bronze jam-nut connector, hybrid arrangement with #8 opto-electronic converter contacts and arrangement with #8 opto-electronic converter contact and size #12 and #20 electrical contacts size #12 and #20 electrical contacts

Series 805 Mighty Mouse with hybrid D38999 Series III type wall-mount D38999 Series III type wall-mount size #8 opto-electronic contact and size receptacle with mixed butt-joint and receptacle with opto-electronic, El Ochito #23 signal contacts expanded beam fiber optic contacts octaxial, and standard signal contacts

Harsh-environment Geo-Marine connector pair with hybrid Mighty Mouse push-pull QDC connector with mixed expanded-beam fiber optic / signal contact arrangement fiber optic and signal contacts Ruggedized aerospace equipment such as mission Available hybrid circular connector packaging computers are occasionally best served by an I/O includes MIL-DTL-38999 connector interface that combines both fiber optic Series III type, Series 80 Mighty Mouse, and more and electrical media. For example, where limited Available hybrid Series 79 micro-crimp rectangular with hybrid signal / M83513-type Micro-D connectors with hybrid fiber optic / available panel space makes multiple connector rectangular connector Eye-Beam GLT expanded beam F/O arrangement TwistPin signal contacts packaging includes penetrations difficult, or in situations where a Rugged ITH 5015- MIL-PRF-83513 Micro-D type reverse-bayonet remote piece of fiber optic equipment requires and Glenair Signature industrial / rail Series 79 connector pair with electrical power. Eye-Beam GLT expanded Expanded-beam solutions beam fiber optic contacts and size #16 include Eye-Beam GLT signal contacts Rugged IPT threaded (grin lens terminus) and rail connectors with Eye-Beam GMA ball- Hybrid optical / electrical Eye-Beam GMA (ball lens) lens insert fiber optic MIL-DTL-5015 (Series ITS type) contacts and size #16 signal contacts

72 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Rugged Fiber Optics and Photonics 73 MISSION-CRITICAL INTERCONNECT SOLUTIONS Glenair, Inc. 1211 Air Way • Glendale, California • 91201-2497 Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected] www.glenair.com

Glenair Power Telephone: Glenair UK Ltd Telephone: Products Group 203-741-1115 40 Lower Oakham Way +44-1623-638100 20 Sterling Drive Facsimile: Oakham Business Park Facsimile: Wallingford, CT 203-741-0053 Mansfield, Notts +44-1623-638111 06492 [email protected] NG18 5BY England [email protected]

Glenair Microway Systems Telephone: Glenair Nordic AB Telephone: 7000 North Lawndale Avenue 847-679-8833 Gustav III : S Boulevard 42 +46-8-50550000 Lincolnwood, IL Facsimile: SE-169 27 Solna [email protected] 60712 847-679-8849 Sweden

Glenair GmbH Telephone: Glenair Iberica Telephone: Schaberweg 28 06172 / 68 16 0 C/ La Vega, 16 +34-925-89-29-88 61348 Bad Homburg Facsimile: 45612 Velada Facsimile: Germany 06172 / 68 16 90 Spain +34-925-89-29-87 [email protected] [email protected]

Glenair Italia S.p.A. Telephone: Glenair France SARL Telephone: Via Del Lavoro, 7 +39-051-782811 7, Avenue Parmentier +33-5-34-40-97-40 40057 Quarto Inferiore – Facsimile: Immeuble Central Parc #2 Facsimile: Granarolo dell’Emilia +39-051-782259 31200 Toulouse +33-5-61-47-86-10 Bologna, Italy [email protected] France [email protected]

Glenair Korea Telephone: 6-21Tapsil-ro 58beon-gil +82-31-8068-1090 Giheung-gu, Yongin-si Facsimile: Gyeonggi-do +82-31-8068-1092 Republic of Korea [email protected]

CAT-212A July 2020