Crouse-Hinds

Industrial Fittings Section F

Time-tested and innovative conduit fittings, cord connectors and cable glands move power where you need it simply and safely in any electrical installation.

New Products in the Industrial Fittings Product Line Section • Terminator™ II TMCX Cable Glands 4F F Electrical Fittings Table of Contents

Section F of the Eaton's Crouse-Hinds Product Catalog lists a wide F Section 4F variety of conduit outlet bodies and boxes, cable fittings, unions, connectors, seals, breathers, and drains for both hazardous and Cable Glands and Cable Accessories non-hazardous area use. Information on applications, features, (for hazardous and non-hazardous areas) standard materials, standard finishes, options, size ranges, Includes listings of cable and cord connectors and cable compliances, and accessories is presented for ease of product terminators for armoured and unarmoured cable and cord, and selection. Information relating to product families in Section F is aluminum sheathed cable. Used to: grouped as follows: • Provide means for passing cord, cable or flexible conduit through bulkhead and into boxes and cabinets Section 1F • Form watertight seal ® Condulet Conduit Bodies and Outlet Boxes • Form non-slip connection or termination for flexible cord, cable or (for non-hazardous areas) flexible conduit Conduit bodies for installation in conduit systems to act as pull • Provide grounding continuity outlets, make 90° bends, provide for splices, taps, mounting ADE 1F ADE 6FC LCC TMC outlets, etc. ADE 4F CGB LCCF Terminator™ II TMCX Form 7 Mogul SLB ADE 6F CGFP TGC TMCX Form 8 LBD LBY ADE 1FC EBY THRU-WALL Mark 9 LBNEC ET Form 5 Series 5 Section 5F Form 7 SnapPack™ Elbows, Couplings, Hubs, Grounding Devices, Round cast outlet boxes and accessories for use in conjunction Plugs, Reducers, Service Entrance and Unions with threaded rigid conduit to serve as junction boxes, pull outlets, (for hazardous and non-hazardous areas) accommodate wiring devices and support lighting fixtures. Includes: GRF VXF • Service entrance heads Section 2F • Grounding receptacles and straps Condulet Device Boxes • Unions and elbows for threaded conduit systems (for non-hazardous areas) • Couplings for use where allowance must be made in conduit system for difficult bends or vibration For installation in conduit systems to: • Accommodate wiring devices • Reducers for connecting conduit of different dimensions • Act as pull boxes • Plugs for unused conduit openings and hubs ECGJH • Provide openings for taps and splices GC LNR UNA UNY ECLK GCR PLG UNF UNYL Provided in two box depths with a wide variety of hub EL GCT RE UNFL XD configurations and sizes. Boxes can accommodate single or multiple devices. F HUBS REC UNL XJG FS FD Covers Section 6F Section 3F Seals, Breathers and Drains Condulet Conduit Bodies and Outlet Boxes (for hazardous areas) Includes: (for hazardous areas) • Seals used to prevent passage of gases or flames in conduit runs For use with rigid conduit systems: and from device enclosures • Act as pull and splice boxes • Sealing/drain fittings for retrofit applications • Act as mounting outlets or supports for lighting fixtures • Breathers used to provide ventilation for enclosures • Act as sealing fittings • Drains used to prevent accumulation of moisture in conduit CPS ET LBH STL systems and enclosures ® EAB GUA LBY EAJ • Chico sealing compound and fiber EKC HTL OE GUR Seal Seal and drain Breather EYS EYD and drain EZS EZD ECD EYSR EYDX CD EYSX Secondary Process Sealing Fitting EYS Tool Kit

2 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business Condulet® Conduit Bodies and Outlet Boxes 1F Non-Hazardous 1F Description Page No. 1F Application/Selection see page 4 Shape Selector Chart see page 5 Conduit Bodies - Cast Iron or Aluminum Forms 7 & 8, Mark 9, Series 5 and Form 5 see pages 6–81 Form 7 SnapPack™ see page 9 Mogul Series see pages 13–14 LBD Series see page 15 LBNEC Mogul Pulling Elbows see page 16 Covers for Cast Iron or Aluminum Conduit Bodies Blank Forms 7 & 8, Mark 9, Series 5 and Form 5 see page 8 Mogul Series see pages 13–14 Gaskets for Cast Iron or Aluminum Conduit Bodies Forms 7 & 8, Mark 9, Series 5 and Form 5 see page 8 LBD Series see page 15 Mogul Series see pages 13–14 Conduit Bodies, Covers and Gaskets - Stainless Steel see pages 17–27 Condulet® Outlet Boxes GRF Series see page 19 VXF Series see page 19 Service Entrance Elbows & Tees ET Tees see page 20 LBY & SLB Elbows see page 20

Applications:

1F Considerations for Selection: Conduit bodies and outlet boxes are installed at appropriate • Shape required – determine from configuration of conduit system locations in threaded rigid conduit systems to: and intended function of conduit bodies or outlet boxes • Act as pull outlets for conductors to be installed in a conduit • Size required – determine from conduit and conductor size system • Material required – determine from environmental conditions • Provide openings for splices and taps in conductors (corrosive fumes, buried in concrete, etc.) • Act as mounting outlets for luminaires and wiring devices, or as support for luminaires (with hub and fixture hanging covers) • Act as junction or fuse boxes when fitted with connection blocks or fuse blocks • Connect conduit sections and change direction of conduit runs • Make 90º bends in conduit runs • Provide access to conductors for maintenance and future system changes

Quick Selector Chart - Conduit Bodies Conduit Standard Series Sizes Configuration Styles Material

1 ® Form 7 /2" - 4" C, E, L, LB, LL, LR, T, Feraloy iron or aluminum TA, TB and X

1 Form 8 /2" - 4" C, LB, LL, LR, T, TB and X Feraloy iron

1 Mark 9 /2" - 4" C, LB, LL, LR, T, TB and X Copper-free aluminum

1 Form 5 /2" - 4" C, LB, LL, LR, T, TB and X Durable malleable iron construction

1 Series 5 /2" - 4" C, LB, LL, LR and T Corrosion-resistant copper-free aluminum construction

Quick Selector Chart - Conduit Outlet Boxes Inside Dimensions No. of Surface Conduit Conduit or Flush Standard Series Sizes Depth Dia. Openings Mtg. Material Finish Covers

1 3 3 1 VXF /2 and /4 1 /4 4 /4 4 or 5 S Copper-free Epoxy enamel When box is used as aluminum junction or pull box, install GRF covers, gaskets.

1 3 1 11 GRF /2 to 1 1 /8 to 3 /8 3 /16 0 to 4 S – F Feraloy iron Electrogalvanized Blank, hub, standard alloy or and aluminum paint 4" octagonal box aluminum covers, wiring devices, lighting fixture hangers, gaskets.

Series Page Series Page Series Page 1F C T GRF

Form 7 see pages 6–12 Form 7 see pages 6–12 Form 8 see pages 6–12 Form 8 see pages 6–12 Mark 9 see pages 6–12 Mark 9 see pages 6–12 Form 5 see pages 6–12 Form 5 see pages 6–12 Series 5 Outlet Box see pages 6–12 Series 5 see pages 6–12 see page 19 BT E TB

Form 7 see pages 6–12 Mogul see pages 13–14

LB Form 7 see pages 6–12 LBD Form 8 see pages 6–12 Mark 9 see pages 6–12 Form 5 see pages 6–12

X 1 Form 7 see pages 6–12 /2 –1" see page 15 Form 8 see pages 6–12 Mark 9 see pages 6–12 LBD Form 5 see pages 6–12 Series 5 see pages 6–12 Form 7 see pages 6–12 LL Form 8 see pages 6–12 Mark 9 see pages 6–12 1 Form 5 see pages 6–12 1 /4 –6" see page 15

LBNEC SLB Form 7 see pages 6–12 Form 8 see pages 6–12 Mark 9 see pages 6–12 Form 5 see pages 6–12 Series 5 see pages 6–12 LBNEC see page 16 Service Entrance Elbows see page 20 LR BC LBY

Form 7 see pages 6–12 Mogul see pages 13–14 Form 8 see pages 6–12 Mark 9 see pages 6–12 Form 5 see pages 6–12 BLB Series 5 see pages 6–12

L Service Entrance Elbows see page 20

Mogul see pages 13–14 ET BUB

Form 7 see pages 6–12

Mogul see pages 13–14 TA Service Entrance Elbows see page 20 VXF

Form 7 see pages 6–12 Outlet Box see page 19

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 5 1F 6 Series5bodiesavailableinoptionalconfigurationwithsetscrews • Self-retaining coverscrews. • added strengthandextrawiringroom. gasket assembly. Two coverscrewsprovidedonallsizestoprovidetightand • costs. Coversarereusable. installed withouttheuseofscrews,reducinginstallationtimeand ForMark9–2 • Conduit OutletBodies Features: Provideforaccesstoconductorsmaintenanceandfuture • Make90°bendsinconduitruns • Providetapsforbranchconduitruns • Connectconduitsections • Provideopeningsformakingsplicesandtapsinconductors • Actaspulloutletsforconductorsbeinginstalled • Conduit outletbodiesareinstalledinconduitsystemsto: Applications: SNAPTIGHT captive incover.Coverscanbeusedwithorwithoutgaskets. Wedge nutdesignfacilitatesinstallationandremoval.Nutsareheld • Mark 9,Series5andFormcovers. Stainless steelcoverscrewsarestandardonForm7,8, Blank Covers ForMark9andForm5,canbeconvertedtoopentypegasketsby • Areusedwithblankcovers • Solid gaskets: Gaskets Built-inrollersonallForm51 • Form7hasexclusivesnaptightandwedgenutcoverattachmentto • Conduithubshavetaperedthreadsandfeatureintegralbushings • Manyshapesandsizesareavailableforrigidthreadedconduit– • Form8andMark9bodiesprovidemoreroomforheavier • Form7Conduletoutletbodiesapproachconduitinsizeforneat, • ForForm8– • Open gaskets: ForForm7areusedwithallcovers • on hubsforEMTconduit(addsuffix-MTtocatalognumber) facilitate wirepulling Mark 9 Form 8 system changes Form 7 tearing outcentersectionalongscoredlines– provide clear,unobstructedcoveropening for protectionofwireinsulation 6–12 for completelistingsseepages conductors compact installations FCondulet 1F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright ™ Form 7Coverswithintegralsealinggasketsare 1 / 1 2 / " to4"sizes Cast Ironor Aluminum 2 Feraloy " to4"sizes aktadCvr e ae8 Gasket andCoversseepage iron alloycovershavedomeshapesfor 1 / 4 " to4"CandLBbodies ® Conduit Bodies- 1 / 2 " to2"sizes Series5–aluminumacrylicpaint • Form5–electrogalvanizedwithaluminumacrylicpaint • Mark9outletbodies–natural • Form7,8outletbodies–electrogalvanizedwithaluminum • Standard Finishes: Series5–diecastaluminum • Form5–malleableiron • Mark9outletbodies–copper-freealuminum • Form7,8outletbodies– • Standard Materials: NEMA3RRaintight(wheninstalledwithcoverandgasket) • CSAStandard22.2No.18 • Fed.Spec.:W-C-586D • ULStandard:514B • Outlet Bodies– Certifications andCompliances: ecito Suffix Corro-free . aluminum Copper-free Form 7bodyandcoveronly: Description Options: Series 5 pre-packaged with neoprene gasket and cover . . . . Series 5pre-packagedwithneoprenegasketandcover . . Series 5inanEMTversionwithsetscrewsonallhubs ...... Corro-free © acrylic paint 2013 Eaton’sCrouse-Hinds Business ™ ™ px odrca nenladetra . external and internal - coat powder epoxy . only body external - coat powder epoxy Form 8 Form 7 Mark 9 Mogul Feraloy iron alloy S753 S752 CGN MT SA 1F 7 1F 4 2 / 1 33 2013 Eaton’s Crouse-Hinds Business 2 © / 1 22 2 / 1 1 4 / 1 11 4 / 3 2 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright / Hub Size 1 TB15 TB25 TB35 TB45 TB55 TB65 X17X18X19 X27X15 X28X50M X29 X37 X25 X38 X75M X39 X100M X47 X35 X448 X125M X150M X57 X45 X58 X200M X67 X55 X68 X65 T17T18T19 T27T50M T28T15 T29 T37 T75M T38 T100M T25 T39TA17 T47 T125M TA27 T448 T35 T150M T49 TA37 T57 T200M T58 T45 TA47TB17 T59 T250MTB18 T67 TB27 T68 T300MTB19 TA57 T55 TB28 TB37 T69 TB29 T350M TB38TB50M T77 TA67 T78 TB75M TB39 TB47 T65 T400M TB100M TB448 T789 TB125M TB49 T87 TB150M TB57 T88 TB58 T75 TB200M T889 TB59 TB67 T97 TB68 T85 T989 TB69 T107 T1089 T95* T105* LB17LB18 LB27LB19 LB28LB50M LB37 LB29 LB75MLB15 LB38 LB100M LB39 LB47 LB125M* LB25 LB150M* LB448LL17 LB200M* LB35 LB49 LB250M*LL18 LB57 LB300M* LB58 LL27LL19 LB350M* LL28 LB45 LB400M* LL50M LB59 LL37 LB67 LL29 LL75M LB68LL15 LL38 LL100M LB55 LL39 LL47 LL125M LB69 LL25 LB777 LB78 LL448LR17 LL150M LL35 LL49LR18 LB65 LL200M LB87 LB789 LL57 LR27 LL58LR19 LB888 LL250M LR28 LL45LR50M LR37 LB889 LB75 LL59 LR29 LL300M LR75M LB97 LL67LR15 LR38 LB98 LR100M LL68 LL350M LR39 LR47 LR125M LB989 LL55 LR25 LB85 LL400M LL69 LR448 LB107 LR150M LL777 LB108 LL78 LR35 LR49 LB1089 LR200M LR57 LR58 LL65 LB95 LR250M LL87 LL789 LR45 LR300M LR59 LL888 LR67 LR350M LR68 LL889 LL75 LB105 LL97 LR400M LR55 LR69 LR777 LL989 LR78 LL85 LL107 LR65 LR87 LR789 LL1089 LR888 LL95 LR889 LR75 LR97 LR989 LL105 LR85 LR107 LR1089 LR95 LR105 C17C18C19 C27C50M C28C15 C29 C37 C75M C38 C100M C25 C39E17 C47 C125M* C448 C150M* C35 E27 C49 C200M* C57L17 C58 C250M* C45 E37 C300M* C59 L27 C67 C350M* C68 C55 C400M* L37 C69 C77 C78 C65 L47 C789 C87 C88 C75 C889 L57 C989 C85 L67 C1089 C95* C105* Series 5 Form 7 Form 8 Mark 9 Series 5 Form 5 Form 7 Form 8 Mark 9 Form 5 Series 5 Form 7 Form 7 Form 8 Mark 9 Form 5 Form 7 Form 8 Mark 9 Form 5 Series 5 Form 7 Form 8 Mark 9 Form 5 Series 5 Form 7 Form 8 Mark 9 Form 5 Series 5 Form 7 Form 8 Mark 9 Form 5 Series 5 Form 7 Form 7 2 openings, one of which is furnished with a blank sheet steel cover Double faced – may be used as LL or LR – has Style X T TA TB LB LL LR C E L Conduit Bodies - - Bodies Conduit ® " - 4" Form 5 LB and C bodies are supplied with built-in rollers to facilitate wire pulling. 4 / 1 Shape Threaded Rigid Bodies Threaded Dimensions Pgs. See pagesDimensions 5 – see Section CP) for Form 10–12 (Dimensions * 1 Condulet Cast Iron or Aluminum or Cast Iron 1F 8 Solid Gaskets-Neoprene Blank Covers 2 1 2 1 1 Size §Two coverscrewson ‡Form 7Snaptightcoverswithintegralsealinggasketareinstalledwithouttheuseofscrews. 3 1 **For coverwithoutintegralgasket,removeGfromcatalognumber. 4 3 3 2 2 1 1 1 * 3 1 Size 4 3 3 † / / / / §Two coverscrewson ‡Malleable ironcovers. 3 1 Size 4 3 3 2 2 1 1 1 **For coverwithoutintegralgasket,removeGfromcatalognumber. 1 1 / / / 4 2 4 2 1 1 1 1 1 1 1 1 / 2 4 2 / / / / / / / / 2 1 1 1 1 / / / / 2 2 2 4 2 2 2 4 – 1 – 2aresolidgaskets; 2 2 2 4 1F 1 / 4 are solidgaskets;1 a.# Cat. Mark 9 8 7 A90G90 8FK5C 970FSA 970FSA K350CM 870FSA K350CM 870FSA K250CM 980F K250CM 980F 880F 880F 670FSA 570FSA K200CM 970F 470FSA K125CM 970F 370FSA K125CM 870F 270FSA 950G 680F K100CM 870F 170FSA 950G 580F K75CM 850G 480F K50CM 850G 380F 670FG 280F 570FG 180F 470FG 370FG 270FG 670F 970SA 170FG 570F 970SA 470F 870SA 650G 370F 870SA 450G 270F 450G 170F 670GSA 350G 570GSA 250G 670SA 470GSA 150G 570SA 370GSA 470SA 270GSA 370SA 989 170GSA 270SA 690G 989 170SA 590G 889 490G 889 390G 690 290G 590 190G 490 390 290 190 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 1 7 7S 7G6060 K200SG K100SG 680G 380G 680 380 670G 370G 670SG 370SG 670 370 a.# Cat. Wedgenut Form 7 7 8 K350SG K250SG 980 880 970 870 7 7G90K350SG K250SG K125SG K125SG K75SG K50SG 980 580G 880 480G 280G 180G 580 480 280 180 570G 470G 270G 970G 170G 870G 570SG 470SG 270SG 170SG 970 870 570 470 270 170 / 1 2 a.# Cat. Gasket w/Integral Mark 9 / " to2"Form8coversandfourcoverscrewson2 2 " to2"Form8coversandfourcoverscrewson2 iesosPs e ae 10–12(DimensionsforForm5–seeSectionCP) Dimensions Pgs.Seepages Covers andGaskets 1 AK7 AK0NGS14 K0NGASK065N GASK035N GK200N GK100N GASK1946 GASK1943 GASK806N GASK853N GASK576 GASK573 AK7 AK0NGS89 K5NGASK095N GASK085N GK350N GK250N GASK809N GASK808N GASK809N GASK808N GASK579 GASK578 AK7 AK0NGS89 K5NGASK095N GASK085N GASK045N GASK045N GK350N GASK025N GASK015N GK250N GK125N GK125N GK75N GASK809N GK50N GASK808N GASK1945 GASK1944 GASK809N GASK1942 GASK1941 GASK808N GASK805N GASK854N GASK579 GASK852N GASK578 GASK851N GASK575 GASK574 GASK572 GASK571 a.# Cat. Form 7 / 2 1 / 2 – 4areopengaskets. Condulet – 4areopengaskets. Sheet Aluminum a.# Cat. Form 7 ® Conduit Bodies-CastIronor Aluminum a.# Cat. Covers‡ Snaptight™ Form 7 a.# Cat. Form 8* a.# Cat. Gasket w/Integral Form 7 1 / 1 2 / " andlargerForm8covers. 2 " andlargerForm8covers. a.# Cat. Gasket** w/Integral Series 5 a.# Cat. w/Integral Gasket Wedgenut Form 7 Sheet Steel a.# Cat. Mark 9† a.# Cat. Wedgenut Form 7 © 2013 Eaton’sCrouse-Hinds Business a.# Cat. Gasket w/Integral Wedgenut Form 7 Feraloy a.# Cat. Form 8§ ® rnAlyCastAluminum Iron Alloy a.# Cat. Form 8§ a.# Cat. Form 5 a.# Cat. Gasket w/Integral Form 8 a.# Cat. Form 5‡ a.# Cat. Series 5 a.# Cat. Wedgenut Form 7 a.# Cat. Gasket** w/Integral Form 5 1F 9 1F 2013 Eaton’s Crouse-Hinds Business © TB17 CG X17 CG LL17 CG LR17 CG T17 CG LB17 CG C17 CG C27 CG LB27 CG LL27 CG LR27 CG T27 CG TB27 CG X27 CG C37 CG LB37 CG LL37 CG LR37 CG T37 CG TB37 CG X37 CG LB57 CG LL47 CG LL57 CG LR47 CG LR57 CG T47 CG T57 CG TB47 CG TB57 CG X47 CG X57 CG C47 CG C57 CG LB47 CG LB67 CG LL67 CG LR67 CG T67 CG TB67 CG X67 CG C67 CG C C LB LL LR T TB X C LB LL LR T TB X LB LL LL LR LR T T TB TB X X C C LB LB LL LR T TB X C see pages 6–12. " " " " " " " " " " " " " " 4 2 4 2 4 2 2 4 2 4 2 4 2 4 / / / / / / / / / / / / / / "TB " "X " "LL " "LR " "T " " " "LB " 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 2 4 2 4 2 4 2 4 2 4 2 4 / / / / / / / / / / / / / / Ordering Information Ordering Trade Size Shape Cat. # 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1" 1" 1" 1" 1" 1" 1" 1 1 1 1 1 1 1 2" 1 2" 1 2" 1 2" 1 2" 1 2" 1 2" 1 Form 7 Condulets and covers are available in additional configurations, sizes and materials. For a complete listing of Form 7, Form 8 and Mark 9 conduit bodies and covers www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright ™ iron alloy Conduit Bodies - Cast Iron or Aluminum or Cast Iron - Bodies Conduit ® ®

– electrogalvanized with Feraloy

installed and taps in conductors and conduit system for maintenance future system changes Feraloy aluminum acrylic paint coded to facilitate more efficient inventory control stock a single SKU instead of three separate component numbers – order the body, cover and gasket with one catalog number – saving transaction costs, and making product selection and merchandising fast and easy a round back design for neat, efficient installations integral bushings for protection of wire insulation with integral gasket. The wedge nut design facilitates installation and removal. Nuts and screws are held captive in cover combination slotted and Phillips head, for easy installation and superior corrosion protection Form 7 SnapPack Body,Pre-Assembled and Cover Gasket Applications: in conduit Form 7 Condulets are installed systems to: • for conductors being Act as pull outlets • for making splices Provide an opening • Connect conduit sections • conduit runs Provide taps for branch •bends in conduit runs Make 90-degree •conductors in a Provide access to • Gasket – urethane • Cover – sheet steel • Cover screws – stainless steel • • Sheet steel – electrogalvanized • Body – Finishes: Standard Certifications and Compliances: • UL Standard: 514B • CSA Standard: C22.2 No. 18 Materials: Standard • All SnapPack product is individually bar • Distributors and end-users need to • Form 7 conduit bodies are compact with • Conduit hubs have tapered threads and • Many shapes and trade sizes available • Sheet-steel wedge nut cover is provided • Cover screws are stainless steel with a Features: Condulet 1F 10 a a d b a e d c Size Form 7E e d c b Size Mark 9C e c b Size Form 8C e d c b Size Form 7C a 1F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 1 3 1 1 1 55 / 2 5 3 3 3 / / / / 16 16 8 8 5 5 11 1 15 1 3 1 1 3 1 1 / / 2 2 / Cast Ironor Aluminum 5 3 7 11 3 3 3 3 16 / / / / / / / 16 8 16 16 8 8 8 / 16 Dimensions (InInches) 1 4 3 1 15 1 / 2 / 3 3 3 9 16 / / / / 16 8 8 16 Condulet 3 1 1 1 3 / 4 15 3 9 5 11 / / / 8 16 8 / / 16 16 E 3 1 1 6 3 1 1 1 677 3 3 / / 4 4 15 3 3 11 9 13 1 9 5 / / / / / / 16 16 32 8 16 8 / / / 16 16 16 ® 4 1 1 1 6 11 9 1 3 7 19 / / / / 3 3 1 1 1 5 16 2 4 8 / Conduit Bodies- / 32 4 13 1 9 5 3 / / / / 8 16 8 16 / 16 4 1 1 1 7 11 4 1 1 1 11 9 3 3 15 5 1 3 3 7 5 1 2 2 7 / / / / / / / / 16 8 4 16 2 8 4 8 / 16 5 15 3 1 1 1 / / / / / 16 16 2 2 4 / 16 4 1 1 1 6 1 1 3 3 7 / / / / 2 8 4 8 68 2 2 2 8 1 1 1 3 1 1 C / / / / / 4 2 4 4 2 2 8 55 1 2 2 5 1 2 3 1 1 3 3 5 7 1 5 3 3 / / / / / / / / / / / 8 2 4 4 16 16 16 4 16 4 16 2 3 3 10 22 a e d c b Size Form 7L 1 7 3 7 / / / / © 16 8 16 16 1 / 2013 Eaton’sCrouse-Hinds Business 2 2 10 1 1 2 2 8 1 6 2 2 25 1 7 15 7 9 3 1 1 1 3 / / / / / / / / / 2 16 16 16 16 2 2 8 4 / / 3 32 16 / 8 4 3 2 1 15 1 / 2 / 3 1 3 9 16 / / / / 16 4 8 16 10 4 556 4 15 1 7 1 / / / 4 16 2 7 5 / / 8 8 3 3 1 2 1 5 / 4 13 1 7 5 3 / / / / 3 12 22 6 2 34 3 9 22 8 34 3 8 16 8 16 / 16 9 3 7 1 3 9 3 / / / / / / / 16 8 16 8 16 16 4 1 / 4 10 4 4 15 33 1 13 / 4 / 7 5 16 / / 8 8 L 4 1 2 1 66 11 1 3 3 7 / / / / 2 8 4 8 4 15 11 8 3 3 12 10 55 13 5 5 18 7 1 3 9 1 5 1 1 55 1 3 2 / / / / / / / / 7 1 11 1 16 2 8 16 4 8 2 4 5 7 / / / 3 3 5 1 1 / / 16 4 2 / / / / / / 7 3 8 8 16 / / 4 16 16 2 4 16 4 1 3 2 7 1 7 15 9 9 1 1 / / / / / 16 16 16 8 2 / 13 5 6 5 18 4 16 7 1 15 / / 4 15 3 8 3 4 4 3 10 4 16 4 / 7 3 16 / / 13 3 9 1 3 1 16 4 / / / / / 8 16 4 8 4 / 5 3 7 16 / / / 8 4 8 6 2 4 3 3 2 3 7 1 1 1 / / / / / 8 16 8 8 8 1F 11 16 16 1F / / 4 8 16 4 8 16 8 16 / / / / / / / / 16 16 16 16 11 1 7 7 11 1 7 7 7 7 / / / / 8 2 8 16 16 4 2 4 16 4 16 / / / / / / / / / / / 16 3 15 1 15 1 7 1 1 1 13 1 7 13 1 7 / 8 / 16 16 4 12 5 6 4 10 4 16 5 8 5 13 4 12 7 5 4 10 4 16 7 6 5 13 4 16 7 6 5 13 15 7 / / 4 / 13 11 1 10 3 13 4 6 4 16 16 / / 8 16 16 8 16 4 4 8 / / / / / / / / 16 16 7 7 7 7 7 11 1 11 1 7 / / 2 8 16 16 2 16 4 16 2 8 2 2 16 4 2 2 16 4 / / / / / / / / / / / / / / / / / / 1 11 1 7 7 1 9 1 7 1 7 15 1 1 9 1 1 1 9 1 16 5 8 5 13 5 13 16 7 5 13 12 4 6 4 10 12 6 5 4 10 16 7 16 / 8 / 16 7 15 / 2 16 4 / / / 1 7 11 1 10 4 16 16 16 / / / 8 8 8 2 2 / / / / / 16 16 15 7 7 15 7 1 1 15 / / 4 4 2 4 8 4 16 8 8 4 16 8 2 / / / / / / / / / / / / / 13 11 1 1 1 1 3 3 9 3 7 1 9 3 1 33 13 4 6 4 10 4 10 33 13 6 4 10 33 10 4 5 3 8 33 10 5 4 3 8 33 13 6 2013 Eaton’s Crouse-Hinds Business © 16 16 / / 9 9 8 22 113 34 13 16 16 16 / / / 8 8 8 2 2 / / / / / 16 15 7 7 15 7 1 1 15 / 2 16 4 4 2 8 4 2 8 4 16 8 2 8 4 16 8 2 8 / / / / / / / / / / / / / / / / / / / 1 7 11 1 1 1 1 1 1 5 3 9 3 1 1 1 9 3 1 1 13 4 6 4 10 10 13 6 556 4 10 10 3 5 3 8 10 5 3 8 6 556 32 / 2 2 8 8 32 32 / / / / / / 32 16 1 1 1 25 1 1 1 / / 16 8 8 16 16 16 8 16 8 8 8 16 8 8 4 16 8 4 / / / / / / / / / / / / / / / / / / 6 1 9 2 456 2 7 1 7 1 9 15 3 7 1 1 1 1 7 3 1 1 7 3 13 3 22 10 3 4 2 34 8 22 10 4 3 2 22 8 3 4 2 6 22 8 4 34 2 6 22 114 3 13 LB 16 16 16 / / / 2 4 4 16 4 8 2 2 4 4 2 4 2 8 16 16 16 2 8 16 16 2 8 32 4 / / / / / / / / / / / / / / / / / / / / / / / / / 32 1 3 3 7 1 1 1 1 3 3 1 1 1 1 9 9 15 7 1 1 11 7 15 7 1 1 1 3 / 16 4 8 32 4 / / / / / 1 7 2 3 2 68 2 6 1 7 3 2 2 68 1 7 2 3 1 1 7 3 2 1 1 9 4 2 5 1 17 3 5 3 5 7 2 3 1 16 32 16 32 32 / / / / / 4 32 2 32 16 4 16 4 32 16 16 4 2 16 16 4 4 2 16 16 4 4 16 / / / / / / / / / / / / / / / / / / / / / / / 1 1 1 3 15 5 3 5 1 1 15 3 15 5 1 1 5 3 3 1 1 5 3 3 1 17 11 3 1 55 7 2 3 1 5 1 5 2 3 1 55 7 3 2 1 5 7 3 2 3 2 32 16 / / 8 8 16 / / / 15 15 5 3 9 11 6 1 2 1 4 32 16 32 / / / 8 2 32 8 8 2 16 2 16 8 4 8 2 4 8 16 32 4 8 4 / / / / / / / / / / / / / / / / / / / / 1 3 7 5 1 9 1 9 7 3 3 1 15 13 3 3 9 3 27 3 7 3 3 1 4 11 6 1 2 1 4 1 4 11 66 1 2 1 4 11 6 2 1 1 4 11 6 2 1 11 66 2 1 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 16 16 LL LR / / 16 16 16 / / / 9 11 5 3 15 4 / 3 5 1 2 3 16 16 16 16 16 32 / / / / / / 8 4 8 8 8 8 16 8 16 8 16 16 16 16 4 16 16 2 16 / / / / / / / / / / / / / / / / / / / 13 1 5 3 3 15 3 15 3 5 7 1 13 9 7 9 3 15 1 13 9 3 1 9 1 4 4 4 4 4 / / / / / 1 3 5 1 2 1 3 1 3 5 1 2 1 3 5 2 1 3 5 2 1 5 2 1 3 3 3 3 3 16 / 16 32 16 Conduit Bodies - - Bodies Conduit / / / 15 7 5 5 2 / 32 16 32 1 2 11 3 1 4 / / / 16 8 8 16 16 16 16 16 8 4 16 32 8 16 8 8 16 4 8 ® / / / / / / / / / / / / / / / / / / / 16 16 19 3 1 3 5 9 3 1 3 19 1 3 3 5 15 7 3 5 9 1 3 3 / / 2 2 2 2 2 / / / / / 1 2 1 3 1 2 3 2 1 1 3 2 1 11 3 1 3 4 4 4 4 4 1 1 15 1 2 15 1 1 b c d e b c d e Mark 9 LL & LR Size Size b c d e Form 8 LL & LR Size Form 7 LL & LR Size b c d e Size b c d e Mark 9 LB b c d e Form 8 LB Form 7 LB Size a a a a a a Dimensions (In Inches) Dimensions Condulet Cast Iron or Aluminum or Cast Iron 1F Condulet® Conduit Bodies - Cast Iron or Aluminum Dimensions (In Inches) 1F

TB T Form 7TB Form 7T Size a b c d e 1 5 5 9 15 3 Size a b c d e /2 5 /8 2 /8 1 /16 /16 3 /16 3 /4 1 7 3 1 13 1 5 3 7 15 3 6 /4 2 /8 1 /4 1 /8 3 /16 /2 5 /8 1 /4 2 /16 /16 3 /16 1 1 3 1 4 4 8 2 3 1 5 1 13 1 7 / 3 / 21/ 4 / /4 4 8 8 16 6 / 22/ 1 / 3 / 1 7 5 3 3 1 /4 7 /16 3 /16 2 /16 1 /4 5 1 1 3 1 1 4 4 8 2 7 / 2 / 31/ 4 / 1 3 7 15 7 1 /2 8 /16 52/16 1 /16 5 /16 1 7 5 3 3 1 /4 7 /16 2 /16 3 /16 1 /4 5 2 3 1 7 3 1 3 9 9 15 7 9 /16 6 /8 32/16 6 /8 1 /2 8 /16 2 /16 3 /16 1 /16 5 /16

3 1 1 7 3 2 9 /16 3 /8 4 /8 2 /16 6 /8 Form 8TB 1 1 5 3 9 3 2 11 17 3 5 2 /2 12 3 /8 5 /4 3 /16 8 /8 / 5 /16 2 /32 1 /8 13/16 3 1 3 3 9 3 /4 9 3 9 3 15 3 12 /16 4 /8 5 /4 3 /16 8 /8 6 /32 2 /4 1 /16 1 /16 3 /16 1 5 7 15 1 1 1 5 1 3 3 9 3 /2 14 /16 4 /8 6 /16 4 /2 10 /4 7 /16 3 /8 1 /4 1 /8 4 /16 1 5 3 15 1 1 1 /4 1 11 3 3 5 4 14 /16 5 /8 6 /16 4 /2 10 /4 8 /2 3 /32 2 /16 1 /4 5 /16 1 1 /2 3 1 3 1 1 Form 8T 10 /8 4 /32 2 /4 2 /8 6 /2 1 13 3 9 2 12 /4 4 /16 3 /4 38/16 1 11 3 5 5 /2 5 /16 1 /4 2 /32 13/16 3 9 5 3 15 Mark 9TB /4 6 /32 22/16 1 /16 3 /16 1 2 1 3 3 5 5 1 5 3 9 / 52/8 1 /8 1 /16 3 /16 1 7 /16 2 /4 2 /8 1 /8 4 /16 3 /4 11 13 9 3 15 1 1 5 5 3 5 5 /16 2 /32 1 /16 1 /8 3 /16 1 /4 8 /2 2 /8 3 /32 1 /4 5 /16 1 19 27 3 1 9 1 3 25 1 1 6 /32 2 /32 1 /4 1 /2 4 /16 1 /2 10 /8 2 /32 42/8 6 /2 1 1 /4 1 15 3 15 5 1 9 9 7 /2 3 /32 2 /16 1 /16 5 /16 2 12 /4 3 /16 538/16 1 1 /2 11 7 1 5 7 1 5 7 11 1 7 8 /32 3 /8 2 /2 2 /32 5 /8 2 /2 15 /8 4 /16 6 /16 4 /4 10 /8 2 5 19 7 13 3 5 13 11 1 7 10 /8 4 /32 3 /32 2 /16 8 /32 3 15 /8 4 /16 6 /16 4 /4 10 /8 Mark 9T

1 3 1 3 5 /2 51/8 2 /8 1 /16 3 /16 3 11 15 3 3 15 /4 5 /16 /8 2 /8 1 /8 3 /16

19 7 5 1 9 1 6 /32 1 /8 2 /8 1 /2 4 /16

1 1 1 3 15 5 1 /4 7 /2 2 /2 3 /32 1 /16 5 /16

1 1 3 7 1 1 /2 8 /4 2 /4 3 /16 2 /4 6

1 7 1 7 1 X 2 10 /2 3 /16 4 /8 2 /8 8 /16 1 5 7 11 1 7 Form 7X 2 /2 15 /8 4 /16 6 /16 4 /4 10 /8

5 13 11 1 7 Size a b c d e 3 15 /8 4 /16 6 /16 4 /4 10 /8 1 5 5 3 15 3 1 3 11 1 7 7 /2 5 /8 3 /16 1 /4 /16 3 /16 3 /2 18 /4 5 /16 8 /8 5 /16 13 /16 3 1 1 1 13 3 15 1 7 7 /4 6 /4 3 /2 21/8 3 /16 4 18 /4 5 /16 8 /8 5 /16 13 /16 1 1 3 1 1 7 /4 42/4 1 /8 4 /2 1 7 1 5 3 1 /4 7 /16 4 /8 2 /16 1 /4 5

1 3 5 9 15 7 1 /2 8 /16 4 /8 2 /16 1 /16 5 /16

3 3 1 7 3 2 9 /16 5 /16 3 /8 2 /16 6 /8 Form 8X

1 11 29 3 5 /2 5 /16 2 /32 1 /4 13/16 3 9 1 3 15 /4 6 /32 3 /16 21/16 3 /16

TA 5 1 1 3 9 1 7 /16 3 /2 2 /4 1 /8 4 /16 1 1 /4 1 1 5 3 5 Form 7TA 8 /2 4 /8 2 /8 1 /4 5 /16 1 3 1 15 1 1 Size a b c d e 1 /2 10 /8 5 /4 2 /32 2 /8 6 /2

1 5 5 7 15 3 2 1 1 9 9 /2 5 /8 2 /8 2 /16 /16 3 /16 12 /4 6 /4 3 /16 38/16 3 1 7 5 1 13 /4 6 /4 2 /8 2 /8 1 /8 3 /16 Mark 9X 1 1 3 1 1 7 /4 3 /4 31/8 4 /2 1 1 7 5 3 3 /2 11 29 3 5 1 /4 7 /16 3 /16 3 /16 1 /4 5 5 /16 2 /32 1 /4 13/16 1 3 11 9 15 7 3 9 1 3 15 1 /2 8 /16 3 /16 3 /16 1 /16 5 /16 /4 6 /32 3 /16 21/16 3 /16 3 1 1 7 3 2 9 /16 4 /4 4 /8 2 /16 6 /8 5 1 1 3 9 1 7 /16 3 /2 2 /4 1 /8 4 /16

12 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 1F 13 4 8 / / 3 8 4 4 1 4 4 / / / / / 3 1 3 1 3 1F 4 23 5 5 4 4 22 7 5 4 8 / 4 1 2 2 4 4 / / / / / 3 2 8 4 4 1 1 1 3 / / / / 1 7 1 3 22 6 5 4 23 4 5 4 BLB4 BLB5 BLB6 BLB7 BLB8 BLB9 BLB10 BLB3 32 / 8 32 16 / 16 29 3 / / 4 / 8 4 / / / 27 1 13 3 1 13 33 16 5 4 3 33 18 4 4 3 32 8 / / 16 16 3 / 2 8 4 29 / 2 32 4 / / / / / / 1 5 1 13 1 3 1 13 18 3 3 16 5 3 2013 Eaton’s Crouse-Hinds Business 4 2 2 2 / / / / 1 1 1 1 © 1 2 2 3 3 4 Mogul Series Size1 1 Cat. # † For 5" size use LBD012. For 6" size use LBD014. BLB† 16 / 4 / 11 3 16 8 8 8 / / / / 3 5 1 5 22 12 4 2 22 13 3 2 4 16 / / 3 2 16 8 / / / 11 2 8 8 1 9 5 / / / 1 5 5 1 13 2 334 2 1 12 3 334 2 BC3 BC4 BC5 BC6 BC7 BC8 BC9 BC10 4 16 16 16 8 / / / / / BC BLB 1 9 5 3 7 32 / 4 32 16 8 9 2 2 1 / / / / 1 19 9 3 7 8 3 2 1 32 32 16 8 16 8 / / 16 8 / / / / 9 7 3 7 / / 19 27 3 7 9 1 2 1 6 6 10 10 15 15 20 20 2 1 6 6 10 10 15 15 20 20 8 2 2 4 2 2 / / / / 1 1 1 1 Mogul Series Size1 Cat. # 1 1 2 2 3 3 4 BC a Mogul Series BLB Size 1b d e 1 Mogul Series BC Size 1b c d e 1 Dimensions In Inches: a c SA HDG www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Conduit Bodies - Bodies Conduit ® iron alloy – electrogalvanized and ® Feraloy Feraloy aluminum acrylic paint bushings are stiff, due to large size or type of insulation when pulling large conductors during conductors (protects insulation installation) taps maintenance and future system changes Options: DescriptionMaterial – copper-free aluminum Hot dipped galvanized Suffix Standard Materials: Standard • Finishes: Standard • Certifications and Compliances: • UL Standard: 514B • Fed. Spec.: W-C-586d • CSA Standard: C22.2 No. 18 Features: Mogul bodies have: • Long openings • Provision for easy bends • Taper tapped hubs with integral • Stainless steel cover screws • Covers are designed with integral gasket Applications: in conduit Mogul bodies are installed systems to: •for conductors that Act as pull outlets • openings needed Provide the longer • and kinks in large Prevent sharp bends • for splices and Provide ample openings • Provide access to wiring for Condulet Mogul Bodies, Gaskets Covers and Cast Iron or Aluminum or Cast Iron 1F 14 BUBXL withCover&Gasket a ie11 e d c b 1 Size Mogul SeriesBT 1 e d c b 1 Size Mogul SeriesBUB In Inches: Dimensions a BUB ieCt # Cat. 3 2 Size Extra LargeMogulSeries 4 3 3 2 2 1 ieCt # Cat. 1 1 Size Mogul Series 1 1 1 1 / / / / 2 2 2 4 1F 01 51 020 20 15 15 10 10 6 6 1 2 2 9 9 01 51 020 20 15 15 10 10 6 6 1 3 1 7 3 11 3 7 5 7 9 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright / / / / / / / 8 16 16 / 8 32 8 16 16 Cast Ironor Aluminum 1 3 2 9 Condulet ou ois CoversandGaskets Mogul Bodies, 1 2 3 9 7 5 5 9 1 / / / / / 7 3 3 5 1 8 32 16 16 4 U BT BUB / / / / / BUB10 BUB9 BUB8 BUB7 BUB6 BUB5 BUB4 BUB3 8 16 16 16 4 BUBXL8 BUBXL6 2 4 2 13 1 2 334 3 13 1 5 1 9 1 / / / / 5 1 1 8 16 16 2 3 / / / / 8 2 2 1 4 / 2 ® Conduit Bodies- 2 4 3 13 22 2 4 13 22 5 1 1 / / / 5 1 8 16 8 3 / / / 8 8 1 4 / 2 BT Coverdesigntakeslesstimetoinstallandcanbeusedasasolidorwiththecenter • Rollersimprovetheabilitytopulllargerconductorsandprotectinsulationwhen • Largerinternalvolumeprovidesadditionalspaceforbendingandpullinglargeconductors • money whilemaintainingthequalityyouhavecometoexpectfromEaton'sCrouse-Hinds. XL MogulConduitBodiesandCoversaredesignedtoeaseinstallation,savingtime BUBXL Moguls 4 3 3 2 2 1 ieCt # Cat. 1 1 Size Mogul Series 3 5 3 18 3 4 17 1 1 1 1 13 19 5 1 / / / / removed formoreinternalvolume wire isbeingpulled,greatlyreducingcutcableincidents (complies withthe6xwirebendingrule) / / 13 1 13 1 2 2 2 4 8 2 / / / / 3 4 2 16 32 / / / 3 16 16 8 / 4 3 5 4 18 33 3 4 5 17 33 13 23 3 13 1 5 / / / 8 / / 3 4 8 / 7 16 32 / 16 / 8 8 4 6 4 23 4 5 6 23 3 7 7 1 3 1 3 1 BT10 BT9 BT8 BT7 BT6 BT5 BT4 BT3 / / / / / / / / 4 8 8 2 3 4 4 8 2 3 © / / 4 8 2013 Eaton’sCrouse-Hinds Business 4 6 5 23 4 4 5 6 23 4 3 7 3 3 1 13 / / / / / 4 8 8 3 4 4 / 1 / 16 / 4 4 ie23 e 2 d c b a Size Mogul SeriesBUBXL Blank Covers 1 Mogul SeriesexceptBUBXL) 1 or Size Feraloy 3 2 1 1 1 / / / C B 2 2 2 or 4 or 3 or 2 1 / 4 ® iron alloy(forall 22 15.25 3.38 4.25 5.58 22.85 12.25 2.25 3.00 4.07 15.28 BUBXL BG48 BG98 BG88 BG68 aktCt # Gasket Cat. With RoundNeoprene A E D 1F 15 8 8 4 4 8 8 / / / / / / 32 32 32 7 7 3 3 7 7 / / / 16 / 11 17 11 3 4 4 7 10 10 19 19 30 1F – 4" 16 2 / 8 4 4 8 4 2 8 / / / / / / / / LBD800 LBD120 LBD140 LBD900 LBD900 1 5 3 3 7 1 1 13 5 2 315 315 4 4 424 424 5 739 13 1 1 1 2 GASK989R GASK989R GASK688R GASK687R LBD9900 LBD10900 LBD014 LBD012 16 2 2 / 8 8 8 4 4 8 8 8 4 16 16 2 8 / / / / / / / / / / / / / / / 1 1 5 5 5 3 3 1 1 5 3 5 9 13 1 5 2 / 3 4 6 5 3 3 5 6 4 4 5 5 7 7 7 7 8 1 1 1 3 4 1 3 4 6 5 8 8 8 8 2 / / / / / 16 7 7 7 7 1 / 16 16 16 16 8 4 16 2013 Eaton’s Crouse-Hinds Business / / / / / / / 7 9 9 5 5 15 1 7 © 5 9 9 10 10 11 11 12 15 9 2 2 4 5 LBD400 LBD600 LBD800 LBD600 16 16 16 16 – 2", 5" – 6" 2 / / / / 16 8 8 16 2 16 / / / / / / LBD4400 LBD5500 LBD7700 LBD8800 LBD6600 GASK990R GASK683R GASK684R GASK990R GASK684R 4 7 11 11 7 7 13 13 7 1 7 4 4 8 / / / / 1 1 1 5 6 12 19 20 19 20 27 52 6 8 12 27 32 41 2 4 2 4 2 2 / / / / / / 4 2 2 1 1 1 1 1 1 / / / 1 1 1 1 1 3 2 2 1 1 2 2 1 1 3 2 2 2 2 2 4 2 / / / / / 1 1 1 1 1 2 4 / / 1 1 1 2 2 3 3 4 3 1 3 4 5 6 – 1" 1 2 / 1 LBD100 LBD200 LBD300 LBD1100 LBD2200 LBD3300 GASK680R GASK681R GASK682R 2 4 2 4 2 4 / / / / / / LBD1100 Cat. #LBD2200 LBD3300 LBD4400 LBD5500 LBD6600 LBD7700 LBD8800 SizeLBD9900 (iron) LBD10900 (iron) LBD9900 (-SA) a b c d e Replacement Gaskets for Above Sizes Replacement Gaskets for Above Rubber Size1 Cat. #3 with Hardware Replacement Cover Assembly SizeSize1 Cat.3 # Cat. # Size Size Cat. # Cat. # Size Cat. # LBD10900 (-SA) LBD012 LBD014 1 1 Size Cat. # Size Cat. # Size Cat. # 1 3 1 Dimensions In Inches: Ordering Information Ordering SA www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright iron alloy ® Feraloy Conduit Bodies - - Bodies Conduit ®

iron alloy:

Feraloy conductors to be pulled straight through hubs from either direction bends (relieves strain on insulation) bushings are stiff due to large size or type of are stiff due to large size insulation either direction allowing straight pull in buildings motors maintenance and future expansion " to 4" sizes, electrogalvanized and 2 / Certifications and Compliances: • UL Standard: 514B • Fed. Spec.: W-C-586d • CSA 22.2 No. 18 aluminum acrylic paint; 5" and 6" sizes, zinc chromate primer and aluminum lacquer • Neoprene – natural Options: DescriptionMaterial – All sizes, copper-free aluminum Suffix Standard Finishes: Standard • 1 Standard Materials: Standard • Body and cover – Features: LBD bodies have: • Cover openings on an angle permitting • Domed covers to permit easy conductor • Cover and gasket furnished • Taper tapped hubs with integral • Gasket – Neoprene Applications: at 90° bends in LBD bodies are installed rigid conduit to: • for conductors that Act as pull outlets •in conduit system, Make 90° bends • service entrance to Provide for conduit • entrance to Provide for conductor • Provide access to wiring for LBD Mogul LBD Mogul Cast Iron or Aluminum or Cast Iron Condulet 1F 16 Applications: Aluminumlacquer • Standard Finishes: Diecastcopper-freealuminum • Standard Materials: CEC:22.1 • CSAC22.2No.18 • NEC:Article314 • ULStandard:514A • Compliances: Certifications and Smoothdesignandfinishmakehandling • Coverisgasketed • Heavydutymachinescrewsforcover • Taperedthreadsprovideeasyassembly, • Dimensionfromcenterlineofbackhub • Largedomecoverpermitseasy,straight • Features: Anaccessibleopeningtoaccommodate • Achamberformakingsplicesandtaps • Apullboxforpullinglargeconductors • Achamberforcontaining90°turnin • Anaccessibleweatherresistant • in conduitsystemstoprovide: Die castmogulpullingelbowsareinstalled job easy andcomplementanyconstruction tight construction the tradediameterofconduit to bushingofendhubexceedssixtimes through pull future changesofthesystem buildings change conductordirectionortoenter large stiffconductors.Usedeitherto conductors chamber forcontainingheavyduty 1F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Cast Ironor Aluminum Mogul PullingElbows Condulet ® Conduit Bodies- In Inches: Dimensions and Screws WithCover,LBNEC Furnished Gasket LBNEC7 a.#Sz c b a Size LBNEC10 LBNEC9 LBNEC8 # Cat. 4 ieCt BendingRadius # Cat. 3 3 2 Size 1 1 / / 2 2 LBNEC10 LBNEC9 LBNEC7 LBNEC8 © 2 4283 321 1 1 2013 Eaton’sCrouse-Hinds Business / / 2 2 Weather Resistant 7 7 5 5 3 3 1 / / / 8 4 4 28 21 11 11 11 11 / / / / 16 16 16 16 9 9 8 8 7 7 9 9 / / / / 32 32 32 32 5 5 4 4 1 1 1 1 / / / / 2 2 2 2 1F 17 1F 2013 Eaton’s Crouse-Hinds Business © Dimension AB Overall length C Overall height D Overall width E Width of opening of opening Length www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Stainless Steel Fittings deliver Stainless Steel Fittings ® Conduit Outlet Bodies, Outlet Conduit ®

penetration of rust/corrosion and eliminate damage to the fitting penetration of rust/corrosion and eliminate damage extreme cold conditions downs are processing and other hygienic areas where wash common and increase fittings - this will lower your total cost of ownership your return on investment cleaners to keep them looking like new for protection of wire insulation installations system changes power where you need it, saving you time and money throughout you need it, saving you time and money power where the life of your facility. and heat, combined with unmatched Superior resistance to corrosion steel Condulet bodies and boxes a long- strength, make stainless most extreme environments. term solution for even the Features: • help reduce the Self-healing properties of stainless steel fittings • in extreme heat and Stainless steel fittings retain their strength • clean Fitting surface is easy to maintain and keep • perfect for food Easy cleaning capabilities make these fittings • replacement of Superior strength and durability greatly reduce • environment-damaging Stainless steel fittings do not require harsh • integral bushing Conduit hubs have tapered threads and feature • for neat, compact Outlet bodies designed to match conduit size Applications: installed in conduit systems to: Conduit outlet bodies are •for conductors being installed Act as pull outlets • for making splices and taps in conductors Provide openings • for lighting fixtures and wiring devices Act as mounting outlets • Connect conduit sections • Provide taps for branch conduit runs • Make 90° bends in conduit runs • and future Provide for access to conductors for maintenance Eaton's Crouse-Hinds Condulet Eaton's Crouse-Hinds Standard Materials: Standard • Bodies - 316 stainless steel • Covers - 316 stainless steel • Cover Screws - 316 stainless steel • Gasket - neoprene Certifications and Compliances: • UL Standard 514A • CSA Standard C22.2 No. 18.1-04 • Raintight - when installed with cover and gasket Covers and Gaskets - Stainless Steel and Gaskets Covers Condulet 1F 18 T ConduitBody,CoverandGasket Ordering Information-conduitbody suppliedwithcoverandgasket LB ConduitBody,CoverandGasket LR ConduitBody,CoverandGasket LL ConduitBody,CoverandGasket C ConduitBody,CoverandGasket TB ConduitBody,CoverandGasket 1F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Covers andGaskets-StainlessSteel Condulet ® Conduit OutletBodies, T18SS Number Catalog T108SS T88SS T68SS T58SS T48SS T38SS T28SS LB68SS LB58SS LB38SS LB28SS Number Catalog LB88SS LB48SS LB18SS LB108SS LR38SS ubrTaeSz E D C B A Trade Size LR28SS Number Catalog C38SS C28SS C18SS Number Catalog LL38SS Number Catalog LL28SS TB68SS TB58SS TB38SS TB48SS TB28SS ubrTaeSz E D C B A Trade Size Number Catalog ieABCDE D C B A Size Trade 3 1 "1.554 .048 13.00 10.25 8.00 4.87 3.71 2.50 5.50 4.34 3.13 5.44 4.63 3.38 18.25 15.00 11.50 4" 3" 2" 1 "75 .117 .24.61 1.42 1.78 2.31 7.53 1 1" / / 3 1 "1.033 .325 8.00 2.50 3.13 3.38 10.50 2" 1 "64 .017 .24.55 1.42 1.78 2.00 6.48 1" ieABCDE D C B A Size Trade "1.061 .437 10.25 3.71 4.34 6.13 13.50 3" 1 "1.372 .048 13.00 4.87 5.50 7.25 16.63 4" 1 1 4 2 / / 3 "65 .017 .24.61 1.42 1.78 2.00 6.59 1" ieABCDE D C B A Size Trade / / 3 "1.043 .325 8.00 2.50 3.13 4.38 11.50 2" 1 "75 .317 .24.61 1.42 1.78 3.23 7.53 1" 1 "65 .017 .24.61 1.42 1.78 2.00 6.59 1" 3 .120 .312 3.92 3.15 1.27 1.02 1.63 1.31 2.00 1.75 6.61 5.56 " " 3 1 "75 .017 .24.61 1.42 1.78 2.00 7.50 1" ieABCDE D C B A Size Trade / / 1 1 / 4 2 2 4 / / / / 1 1 4 .516 .312 3.94 3.15 1.27 1.02 1.63 1.31 1.63 1.35 5.75 4.86 " " 4 .727 .720 6.12 5.50 2.03 1.83 2.47 2.25 2.75 2.50 9.37 8.75 " " 4 4 2 / / .216 .312 3.95 1.27 1.63 1.63 5.72 " 2 4 .128 .312 3.95 1.27 1.63 2.88 6.61 " .216 .312 3.95 1.27 1.63 1.63 5.72 " .616 .312 3.94 3.15 1.27 1.02 1.63 1.31 1.63 1.38 6.56 5.56 " " .827 .720 6.13 5.50 2.03 1.83 2.47 2.25 2.75 3.50 8.38 7.75 " " 2 4 .737 .720 6.12 5.50 2.03 1.83 2.47 2.25 3.75 3.50 9.37 8.75 " " © 2013 Eaton’sCrouse-Hinds Business 1F 19 1F GASK643 Aluminum Cat. # Aluminum Cat. # Iron Cat. # GRF12 SA GRF12 GRF11 SA GRF11 GRF10 GRF110 Iron Cat. # 4 2 / / 3 1 Fixture weight to 125 lbs. Fixture 2013 Eaton’s Crouse-Hinds Business © DescriptionNeoprene Cat. # Surface Surface Description Size Description Surface GRF Gasket GRF Blank Cover GRF Hub Covers Aluminum Cat. # GRF19 GRF29 GRF39 VXF10 VXF20 VXFT10 VXFT20 VXF-VXFT† GRF-GRFX Iron Cat. # GRFX329 GRF329 GRFX339 GRF339 GRFX119 GRF119 GRFX219 GRF219 GRFX129 GRF129 GRFX229 GRF229 GRFX139 GRF139 GRFX239 GRF239 2 4 2 4 2 4 / / / / / / Size Tap 1 3 1 3 1 3 1 1 16 / 8 8 16 8 8 8 8 8 16 16 / / / / / / / / / / †VXFT has hubs on 4 sides and back; VXF has hubs on 4 sides only. 3 15 1 1 1 1 1 3 3 1 1 2 4 2 4 / / / / Inside Depth1 Cat. # 1 3 3 1 2 2 2 3 3 4 Hubs, 3 Plugs Blank Back Boss Inside Depth 1 Hub Size1 3 Cat. # 4 Hubs, 3 Plugs Hub Size1 3 Surface With Lugs 5 Hubs, 4 Plugs Cat. # See lighting section 7L for complete listing of lighting fixtures and hangers. Dimensions In Inches: GRF Blank Surface With Lugs GRFX Tapped Surface GRFX Tapped With Lugs VXF Tapped Surface VXF Tapped With Lugs HDG www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Outlet Boxes - Boxes Outlet iron alloy or copper-free ® ®

™ lighting fixtures (VXF boxes) ™ lighting fixtures (VXF Feraloy

acrylic paint aluminum be obtained by nailing box to concrete form through mounting lug on sides and one boss on back 4 side bosses tapped and plugged, plus blank back boss) pipe plugs for versatility VXF20 VXFT20 covers intended for use on 4" outlet covers intended for use boxes (GRF boxes only) Vaporgard fixtures: Series ARB and VGR; Series ARB fixture hangers (GRF boxes) Standard Finishes: Standard • VXF – epoxy enamel • GRF – electrogalvanized and aluminum Options: DescriptionGRF bodies and covers - hot dipped galvanized Suffix Standard Materials: Standard • VXF – copper-free aluminum • GRF – • UL Standard: boxes and covers – 514A • CSA Standard: C22.2 Certifications and Compliances: Features GRF: Features • Surface mounting. Flush mounting can • Drilled mounting lugs • Four conduit bosses spaced 90° apart • Blank or drilled and tapped bodies (with • Compact, shallow design • Takes GRF covers • Multiple tapped conduit openings and • 4 hubs and 3 plugs on VXF10 and • 5 hubs and 4 plugs on VXFT10 and Features VXF: Features Applications: boxes are VXF and GRF cast outlet conduit installed in threaded rigid systems to: • Act as junction boxes • Act as pull outlets • wiring devices and Accept round base • mounting for Act as ceiling or wall • gasketed lighting Mount enclosed and Covers and Gaskets Covers and Cast Iron or Aluminum or Cast Iron Condulet 1F 20 Tapertappedhubsandintegralbushing • Compactsize,smallradiusofbendfor • ET shortradiusteeshave: Tapertappedhubsandintegralbushing • Coveropeningsonanangle,permitting • Screw-oncoverforeaseofinstallation • Maximumvolumeforbendswithina • LBY elbowshave: Coversandgasketsfurnished • Tapertappedhubsandintegralbushing • Compactoverallsizeandshorthubs • SLB elbowshave: Features: Inconcealedconduitrunsallowingsingle • systems: ET shortradiusteesareinstalledinconduit Provideaccesstoconductorsfor • Actaspulloutlets • Make90°bendsinconduitsystems • Actasserviceentranceelbowsbetween • conduit systemsto: SLB andLBYelbowsareinstalledin Applications: LBYelbows– • SLBelbows–copper–freealuminum • Standard Materials: • Copper-freealuminum –natural • Standard Finishes: ETtees– • Fed.Spec.:W-C-586a • ULStandard:514B • Compliances: Certifications and for standardthreadedconduit shallow floorsorpartitions systems. Particularlysuitedforusein use inconcealedoropenconduit for standardthreadedconduit either hub conductors tobepulledstraightthrough and removal compact overallsize for standardthreadedconduit box conduits toflushfloorboxorjunction Eliminates separatefeedandreturn above orbelowmainconduitrun. conduit stubuptooutletboxeslocated maintenance andfuturesystemchanges where spaceislimited weatherhead conduitruns service entranceandvertical and aluminumacrylicpaint Feraloy 1F iron alloy–electrogalvanized www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Feraloy Feraloy iron alloy Condulet ® iron alloy ® Service EntranceElbowsand Service Tees SLB (includescover) ecito Suffix Corro-free Finishes –LBYelbows: Description Options: aluminum construction Material (LBYonly)–copper-free d a d b a Size ET b a Size LBY e c b Size SLB c In Inches: Dimensions ieCt # Cat. 3 1 Size 2 1 1 1 / / 4 2 1 1 / / 2 4 ™ epoxy powercoat 11 3 1 2 1 1 / 2 11 3 25 1 / / 16 8 / / 22 2 1 16 32 / 2 13 / 16 B SLB LBY 3 1 2 444 1 / 4 1 1 5 / / / 2 4 8 – © SLB6 SLB5 SLB4 SLB3 SLB2 SLB1 2013 Eaton’sCrouse-Hinds Business 1 / 3 2 1 2 3 2 / 4 15 3 3 1 – / / / 16 8 2 / 16 1 / 2 3 3 / 4 1 3 / / 4 16 S752 SA 3 1 1 19 4 11 / 11 15 11 1 32 / 8 / / / 32 32 16 ET 3 1 1 33 / 4 1 1 ET LBY (includescover) Largest hubshownattopofphoto / / ieCt # Cat. 3 3 Size # Cat. 3 1 Size 1 1 1 1 – 2 2 – / / / / 4 4 2 4 1 1 / / 2 3 11 3 2 4 – – / 1 1 4 / / 3 2 4 3 1 / – / / 4 4 1 2 2 5 2 4 – 3 7 3 25 3 3 3 – – / / / / / / 4 8 32 8 4 4 / 3 32 3 1 / / / 4 2 4 2 3 15 25 3 / 4 / / 6 2 2 3 6 1 16 32 1 5 3 1 23 1 / / / / / 32 32 8 32 2 / 32 1 1 1 – 3 1 / / 4 2 LBY35 ET218 LBY55 LBY45 LBY25 LBY15 ET328 ET228 3 / 4 – 3 4 1 3 / 3 1 1 4 / / / 8 2 2 6 2 3 3 7 2 31 5 29 3 / / 8 4 / / 32 32 2F

2F 21 Page No. see page 22 see page 23 see page 43 see page 41 see page 37 see page 39 see page 42 see page 42 see page 46 see page 39 see pages 31–34 see pages 25–28 see pages 31–34 see pages 29–30 see pages 35–36 2013 Eaton’s Crouse-Hinds Business © Blank Blank Cast hubs Cast hubs Push button Receptacle Switch Single gang Multi-gang Blank Pilot light FS/FD Series WLR and WLG Wet Locations Covers For NEMA WLR and WLG Wet Configuration and GFCI Receptacles DS Series DS/WP Series FSE Series FS/FD Series Application/Selection Shape Selector Charts or Aluminum Iron Device Boxes - Cast Covers for Cast Iron or Aluminum Device Boxes Covers for Cast Iron Description Plugs and Receptacles Device Boxes and Covers - Stainless Steel www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Device Boxes Device ® Condulet Non-hazardous 2F 22 Provideaccesstoconductorsformaintenanceandfuturesystem • Provideopeningstomakesplicesandtapsinconductors • Actaspullboxesforconductorsinaconduitsystem • Accommodatewiringdevices • Cast deviceboxesareinstalledinconduitandcablesystemsto: Applications: Quick SelectorChart Optionalfinishescanbeobtainedifenvironmentwarrants. See • StandardmaterialandfinishisFeraloy • Theenvironmentandtheuseofboxwilldeterminematerial • Materials andfinishes: Hubsizeisthesameasconduitsize.Avarietyofhubsizesare • boxes tomeetyourrequirements. available. Drilledandtappedopeningscanbesuppliedinblank The tablebelowindicatesthetypesofconduitandboxes Thelayoutoftheconduitsystemdictatesopening • Hub configurationandsize: Inaddition,theneedforadditionalwiringspacewillrequire • Somespecialpurposedevicesofhigherratingswillrequirethe • StandardflushwiringdeviceswillnormallyfitintheFSboxes. • Twoboxtypesareavailable–standard(FS)anddeep(FD),single • Depth: Standardflushdevicesrequireonegangeach • Number ofdevicestobeusedinthebox: Boxesareavailableforrigidsteel,IMC;aluminum;flexible • Boxesarestandardwithmountinglugsandinternalgreenground • Shouldbecompatiblewithconduitorcablesystem. • Type ofconduitsystem: Considerations forSelectionofDeviceBox Drilled &tapped FD blankbodies S1 FS DS .31Trae ii tils te Natural Stainless steel Threadedrigid 1 3.03 2 Drilled andtapped FS blankbodies FD-SS FD Box changes Options listings. available incopper-freealuminum. electrogalvanized andaluminumacrylicpaint.Manyitemsarealso for addedprotection. corrosive environmentsmayrequiredifferentmaterialsandfinishes and finishneeded.Areasofthecountrywithharshweather bushings canbeused. available. Wherethespecifichubsizeisnotavailable,reducing locations ofthebox. deep box. deeper box(FD). through fivegang. conduit andcablesystems. screw. 2F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Condulet Application andSelection 2 1 Depth 1 15 1 11 / / 2 2 / / 16 16 ® 1-3 1-5 1-3 1-4 Threadedrigid 1-3 Threadedrigid 1-3 Gang Cast DeviceBoxes andCovers ® iron alloywith Threaded rigid Threaded rigid Type Conduit Feraloy Feraloy Material Standard Feraloy aluminum) (some arecopper-free Feraloy and devicesareavailable: To provideforawidevarietyofapplications,thefollowingcovers covers areavailable.Selectionwilldependonindividualconditions. Both generalpurposeandweatherproof,waterproofdevices Devices, andAccessories Considerations forSelectionofCovers, ecito Suffix Corro-free Description Options: iron alloy iron alloy iron alloy iron alloy akt e ae43 seepage 43 seepage 43 seepage Pg. 43 42 seepage seepage 42 seepage Pg. Flush mtg.adapter Box extensions 44–45 39and Gaskets seepages Accessories Wiring device Pilot lights Receptacle Pg. Devices 44–46 42,and 39, 37, seepages 41 seepage Blank 44–45 39–41and Plug andreceptacle see pages Pushbutton switch General usesnapswitch Covers eetcesepgs3–9 2 n 44–46 42,and 37–39, seepages 43 seepage Receptacle Pilot light © 2013 Eaton’sCrouse-Hinds Business ™ epoxy powdercoat and aluminumacrylicpaint Feraloy and aluminumacrylicpaint Feraloy Finish Standard and aluminumacrylicpaint Feraloy Copper-free aluminum–natural and aluminumacrylicpaint. Feraloy iron alloy–electrogalvanized iron alloy–electrogalvanized iron alloy–electrogalvanized iron alloy–electrogalvanized S752 2F 23 2F see pages 27–28 2013 Eaton’s Crouse-Hinds Business © FSX/FDX see pages 27–28 FD Stainless Steel see pages 35–36 FSY (With flange) Series Page FDXC see pages 27–28 FSCD see pages 27–28 see pages 27–28 see pages 27–28 see pages 25–26 FSCT/FDCT FST/FDT FSCC/FDCC FSLA/FDLA see pages 25–26 FSSFDD see pages 25–26 see pages 25–26 FSSA see pages 25–26 FSCA see pages 25–26 Series Page www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright see pages 25–26 see pages 25–26 see pages 25–28 see pages 25–26 see pages 25–26 see pages 25–26 see pages 25–26 see pages 25–28 see pages 25–26 Cast Device Boxes with Hubs Boxes Device Cast ®

FSA/FDA see pages 25–26 If the hub configurations required are not available, drilled and tapped openings can be provided in blank boxes per your drilled and tapped openings can be provided not available, are If the hub configurations required specifications. See pages 31–34 for details. Series Page Single Gang Shape Selector Chart Shape Selector Single Gang FSC-SA FSC FDC FSC (Double face) FSL/FDL FSR/FDR FS/FD FS (Double face) FS-SA Condulet 2F 24 pcfctos e ae 31–34fordetails. specifications. Seepages If thehubconfigurationsrequired are notavailable,drilledandtapped openingscanbeprovided inblankboxesperyour FSC/FDC (Twogang) Page FS/FD (Twogang) Series Page (Two gangtandem) FSC Series Page Series 2F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Condulet Multi-Gang ShapeSelectorChart e ae 93 S Togn)sepgs29–30 seepages FSE(Twogang) 29–30 see pages 29–30 seepages FSS(Threegang) 29–30 seepages FSS/FDS(Twogang) 29–30 see pages 29–30 seepages FS/FD(Threegang) 29–30 seepages FSD(Twogang) 29–30 see pages ® Cast DeviceBoxes withHubs © 2013 Eaton’sCrouse-Hinds Business 2F 25 2F FS2 SA FSC2 SA FS1 SA FSC1 SA 2013 Eaton’s Crouse-Hinds Business 4 2 / / © ‡Mounting lugs and ground screw are not offered with standard die cast aluminum box. For sand cast aluminum box with mounting lugs and ground screw, change "SA" in catalog number to "SCA" (Example: FS1 SCA). Size1 Cat.3 # Cat. # Die Cast Aluminum‡ HDG S752 S753 Accessories see pages 37–45 FS1*FS2*FS3† FD1† FD2† FD3† " to 1" FSL1FSL2 FDL1 FDL2*† FSC1*FSC2*FSC3† FDC1† FDC2† FDC3† 2 FSR1FSR2 FDR1 FDR2*† / ™ epoxy powder coat ™ epoxy powder coat 1 2 4 2 4 2 4 2 4 / / / / / / / / Size1 3 Cat. # Cat. # Size1 3 Cat. #*Available in sand cast copper-free aluminum – add suffix SCA to Cat. No. †Available in sand cast copper-free aluminum – add suffix SA to Cat. No. Cat. # Size1 3 Cat. # Cat. # 1 1 Size1 3 Cat. # Cat. # Options: DescriptionFinishes: Corro-free Suffix - external body Corro-free - internal and external Hot dipped galvanized FS & FD Size Ranges: • Hubs – www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright " in depth 8 / 5 Single Gang Device Boxes - Boxes Device Gang Single ® , aluminum) – electrogalvanized and iron alloy or copper-free ® conceal the rough plaster line configurations with hubs, and as blank bodies for drilled and tapped openings boxes used with gasketed covers integral bushing mounting lugs) or flush mounting (without mounting lugs) as listed configuration. Use FD if device to be enclosed exceeds 1 conduit system taps in conductors system changes maintenance and future with single gang on floor or bench (used covers) or FD configuration available in three materials (sheet steel, Feraloy Feraloy aluminum acrylic paint Feraloy aluminum. Condulet With and Without Mounting Lugs for Without Mounting With and Rigid and IMC Conduit Threaded Applications: • Covers for flush mounting extend to • Available in single gang and multi-gang Features: • Internal green ground screw standard on • Suitable for use in wet locations when • Mounting lugs standard on most boxes • Tapered threaded hubs (NPT) with • Available for surface mounting (with • Available as shallow (FS) or deep (FD) Cast device boxes are installed to: Cast device boxes are • devices Accommodate wiring • for conductors in a Act as pull boxes • make splices and Provide openings to •conductors for Provide access to • Connect conduit sections • surface devices FSY boxes for mounting • Ample wiring room provided in either FS • Wide selection of surface or flush covers Standard Finishes: Standard • • Aluminum – natural Standard Materials: Standard • • UL Standard: 514 • ANSI Standard: C33.84 • Fed. Spec.: W-C-5860 • CSA Standard: C22.2 No. 18 Certifications and Compliances: Cast Iron or Aluminum or Cast Iron 2F 26 FS &FD 1 ieCt a.# Cat. †Mounting lugsnotavailable. *Available incopper-freealuminum;addsuffix "SA". # Cat. 3 1 Size #† Cat. 3 Size # Cat. 3 1 Size # Cat. # Cat. 3 1 Size #† Cat. #† Cat. 3 1 Size #† Cat. #† Cat. 3 1 Size / / / / / / / / / / / 4 2 4 4 2 4 2 4 2 4 2 2F S3FDD3 FDD2* FDD1 FSS3 FSS2* FSS1* FDA2 FDA1 FSA2 FSA1 SC FDCC2 FDCC1 FSCC2 FSCC1 SA FDLA2 FDLA1 FSLA2 FSLA1 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright FSSA2 FSCA2 FSCA1 Cast Ironor Aluminum Condulet Threaded RigidandIMCConduit With and Without MountingLugsfor ® Single GangDeviceBoxes - eisHbSz d c b a FD HubSize Series In Inches: Dimensions FS 1 1 1 1 3 3 / / / / 4 2 4 2 © 2013 Eaton’sCrouse-Hinds Business 12 11 7 7 7 7 / / / / 8 8 8 8 e ae 37–45 see pages Accessories 2 2 1 1 11 11 11 7 7 7 / / / 8 8 8 / / / 16 16 16 2 2 2 1 1 1 1 1 1 11 11 11 / / / 2 2 2 / / / 16 16 16 7 3 5 7 3 5 / / / / / / 8 4 8 8 4 8 2F 27 2F 16 8 4 8 / 8 / / / / 5 3 7 15 3 1 3 16 16 16 / / / FDXC219 11 11 11 1 1 1 FDXC 4 4 / / 3 3 8 8 8 / / / 7 7 7 1 1 2013 Eaton’s Crouse-Hinds Business 4 / © Hub Size3 Cat. #‡ FDXC† 8 8 / / 7 7 12 12 FSCT, FSX, FST, FSCD FSX, FST, FSCT, Accessories see pages 37–45 FSY311 FSY312 2 4 / / 3 111 1 FSY DescriptionSingle face Hub Size 1 Cat. # ‡ Double face 1 FSY Dimensions In Inches: FSCT, FSX, FST, FSCD FSX, FST, FSCT, SeriesFSY Description Hub SizeSingle gang, single face Single gang, double face a b Hub Size c a d b FS www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright FDT3 FDX3 Single Gang Device Boxes - Boxes Device Gang Single FSCD1 FSCD2 ® " pipe tap. FSX1FSX2 FDX1 FDX2 FST1*FST2* FDT1 FDT2 4 / 3 FSCT1FSCT2*FSCT3 FDCT1 FDCT2* FDCT3 2 4 2 4 2 4 2 4 / / / / / / / / ‡ Not avaliable with mounting lugs. *Available in copper-free aluminum; add suffix "SA". †6 Hubs – all 1 1 1 Size1 3 Cat. #‡ Size1 3 Cat. # Cat. # Size1 3 Cat. # Cat. # 1 3 Size Cat. # Cat. # FS & FD With and Without Mounting Lugs for Without Mounting With and Rigid and IMC Conduit Threaded Condulet Cast Iron or Aluminum or Cast Iron 2F 28 FS In Inches: Dimensions eisHbSz c b a HubSize FS Series ieCt #† Cat. 3 1 Size Double Face / / 4 2 2F 1 3 / / 4 2 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Double face Cast Ironor Aluminum With and Without MountingLugs FS252 FS152 Condulet 3 3 11 5 / 16 / 16 3 3 1 1 / / 2 8 ® 1 1 Single GangDeviceBoxes - 1 1 / / 2 4 ieCt #† Cat. †Mounting lugsnotavailable. 3 1 Size Double Face / / 4 2 © 2013 Eaton’sCrouse-Hinds Business FSC252 FSC152 e ae 37–45 see pages Accessories 2F 29 8 4 8 8 4 8 / / / / / / 3 7 5 5 3 7 2F 16 16 16 / / / 2 2 2 / / / 1 1 11 11 11 1 FSE22 2 2 1 1 1 2 16 16 16 / / / 8 8 8 / / / 11 11 7 7 7 11 2 2 1 1 1 2 4 / Two Gang Two Size3 Cat. # FSE 2013 Eaton’s Crouse-Hinds Business © 4 2 4 4 2 4 / / / / / / 1 1 1 1 1 1 2 2 2 2 4 2 / / 1 1 1 1 8 4 / / 5 3 8 8 8 8 / / / / 7 7 7 7 8 8 / / 7 7 Accessories see pages 37–45 4 2 4 2 / / / / 3 3 112 1 112 1 2 4 Two gang tandemTwo gang Two / / 3 Hub Size a b e 1 FSC17 FSC27 2 4 / / Two Gang Tandem Two Size1 Cat.3 # Two gang Two SeriesFS Hub SizeFD a b c d h FSC† Two gang tandem Two Series FS Dimensions In Inches: www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Multi-Gang Device Boxes - Boxes Device Multi-Gang ®

FS17 FS27 FS12*FS22* FD12 FS32 FD22* FD32 FSC12FSC222 FDC12 FSC32 FDC222* FDC32

2 4 2 4 2 4 / / / / / / 1 Size1 Cat. #3 Cat. # Two Gang Two 1 3 Two Gang Tandem Two Size Cat. # Size1 Cat.3 # Cat. # Two Gang Two 1 †Use single gang covers only. *Available in copper-free aluminum; add suffix "SA". FS† FSC & FDC FS & FD With and Without Mounting Lugs for Without Mounting With and Rigid and IMC Conduit Threaded Cast Iron or Aluminum or Cast Iron Condulet 2F 30 FS &FD FSS &FDS In Inches: Dimensions ieCt a.# Cat. # Cat. 3 Size Two Gang ieCt a.# Cat. # Cat. 3 Size Three Gang 1 / / 4 4 2F w agwt oniglg Three gang Two gangwith mountinglugs S22FDS222 FSS222 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright S3FD23 FS33 FS23 Cast Ironor Aluminum Condulet Threaded RigidandIMCConduit With and Without MountingLugsfor ® Multi-Gang DeviceBoxes - FSS FSD ieCt # Cat. 3 Size Three Gang ieCt # Cat. *Hubs on2hubsideare 3 Size Two Gang / / 4 4 FSD212* FSS23 1 / 2 " © 2013 Eaton’sCrouse-Hinds Business e ae 37–45 see pages Accessories FD FS Series Three gang ieacd c a Size Hub 3 1113 / / 4 4 7 7 / / 8 8 2 1 11 7 7 / / 8 8 / 16 2 1 1 1 11 11 / 2 / / 16 16 2F 31 Deep Cat. # FD04 FD05 2F FS019 FD019* FS029 FD029* FS039 FD039* FS062 FD062 FS063 FD063 FS094 FD094 FS097 FD097 Shallow Cat. # FS062, FD062 two gang FS094, FD094 four gang FS063, FD063 three gang FS063, FD063 three FS097, FD097 two gang tandem 2013 Eaton’s Crouse-Hinds Business © Single gang Two gang Three gang Four gang Five gang Two gang (takes one two gang cover) Three gang (takes one three gang cover) Four gang (takes one four gang cover) Two gang tandem Ordering Information: Ordering Description *Available in copper-free aluminum. To order add suffix SA to Cat. No. Accessories see pages 37–45 FD05 five gang FD04 four gang FS029, FD029 two gang FS039, FD039 three gang FS039, FD039 three FS019, FD019 single gang www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Blank Device Boxes - Cast Iron - Cast Boxes Device Blank ®

iron alloy – electrogalvanized and

Feraloy Feraloy aluminum acrylic paint configurations. and tapping conduit entrances. boxes. five gang and two gang tandem bodies. opposite corners. or flush covers see pages 37–45. grouped together wiring devices hubs or entrances are required Applications: • Finishes: Standard • Certifications and Compliances: • UL Standard: 514A • CSA Standard: C22.2 No. 18 Materials: Standard Features: • (FS) or deep (FD) Available in shallow • FS/FD bodies have thick walls for drilling • Internal green ground screw standard on • Available in single, two, three, four and • Cast mounting lugs at diagonally • For a wide selection of standard surface Blank cast device boxes are used: Blank cast device boxes • devices are to be Where several wiring • combinations of To assemble special • of conduit Where special arrangements Blank Bodies With Mounting Lugs for With Mounting Blank Bodies Gang, Single Tapping Drilling and Multi-Gang, Tandem Condulet 2F 32 FS062-1-A0CC00. For thisexample: Part 3–symbolsforconduitentrances. Part 2–arrangementnumber; Part 1–boxnumber; three parts: Complete Cat.No.ismadeupof location "a".ForthisexampleA0CC00. written inalphabeticalorderstartingwith Step 4–symbolsaresubstitutedand and "f". none at"b";1""c"and"d";"e" Step 3–conduitentrances Step 2–arrangement1 Step 1–boxrequiredFS062 Example: required. arrangement whereanentranceisnot ‘‘0’’ (zero)forthoselocationson Table 4foreachconduitentrance,using Substitute theappropriatesymbolfrom Step 4 of conduitopeningsfromTable2. Determine themaximumsizeandspacing Step 3 requirements fromTable1. Select thearrangementthatmeets Step 2 Select therequiredbox. Step 1 31–33,proceedasfollows: pages drilled andtappedholeslistedonsee To orderoneoftheblankbodieswith Ordering Information: 2F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Ordering Information Blank BodiesforDrillingand Tapping Condulet 1 / 2 " at"a", ® Blank DeviceBoxes -CastIron Two, Three, FourandFiveGang Table 1/DrillingandTapping Arrangements* Single GangOnly(FSorFD019) Two GangTandem (FSorFD097) †If onlyoneconduitentryisspecifiedorpermitted(seeTable2)onasidewallthatwillbecenteredthewa *Drilling andtappingarrangementsotherthanthoseinTable1areavailable.ConsultEaton'sCrouse-Hinds. †5 4† 12†3† © 2013 Eaton’sCrouse-Hinds Business ll. 2F 33 8 8 4 8 8 / / / / / 7 7 3 5 5 1 1 3 1 1 2F 16 16 / / 16 16 2 2 4 4 8 16 / / / / / / / / 5 5 1 1 3 3 5 7 13 13 1 1 2 2 3 3 1 1 1 16 16 / / 8 8 4 4 4 4 8 8 8 / / / / / / / / / 7 7 3 3 3 3 5 3 13 13 5 1 1 3 3 3 3 1 1 21 1 2 A B C E F 0 16 16 16 / / / 8 8 4 4 8 4 2 / / / / / / / 32 7 7 3 3 7 3 13 13 13 1 / 4 4 / / 1 3 1 3 1 1 1 29 3 3 2013 Eaton’s Crouse-Hinds Business © 16 16 4 4 4 8 16 16 / / / / / / / / 3 3 1 1 1 1 5 5 1 1 sv w x y z 11 111 1 1 4 4 2 2 / / / / 1 1 1 1 1 4 2 / / 1 1 2 4 / / Table 4/Symbols for Openings Table Conduit Size1 3 Symbol 1 1 1 None 2 / 1 111111 1 1 11 111 1 2 2 2 2 2 2 2 2 2 / / / / / / / / / 1 1 1 1 1 1 1 1 1 1 11 1 1 1 1111 1111 1 1111 1 111 1 1 2 / 1 4 4 / / 3 3 11 1 2 2 2 / / / 1 1 1 4 4 4 4 / / / / 3 3 1 3 3 1 1 1 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2 2 2 2 / / / / 1 1 1 1 4 4 / / 3 1 1 1 1 1 1 3 4 4 2 2 2 2 2 2 2 / / / / / / / / / 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 16 16 32 8 32 8 32 16 32 16 8 8 / / / / / / / / / / / / / 32 32 32 9 9 5 5 5 5 5 9 5 9 3 3 3 / / / 1 1 1 1 1 1 1 1 1 1 1 1 1 29 29 31 2 2 2 2 2 2 2 2 2 Cast Device Boxes Device Cast / / / / / / / / / 1 1 1 1 1 1 1 1 1 Maximum Conduit Opening Size Maximum Conduit Opening Bottom and Top 12345122 Sides Back Spacings 1111111 1 1 11 1 11 1 1 1111 1 11 1 3 11 1 1 11 1 ® Cat. # FS097 FD097 FS039 FD039* FD04 FD05 FS062 FD062 FS063 FD063 FS094 FD094 Table 2/Maximum Number, Size and Spacing of Conduit Openings Size and Number, 2/Maximum Table FS029 FD029* FS019 FD019* *Available in copper-free aluminum. To order add suffix SA to Cat. No. FS063 FD063 FS094 FD094 FS097 FD097 FD019* FS029 FD029* FS039 FD039* FD04 FD05 FS062 FD062 Table 3/Distance From Mounting Surface 3/Distance From Table ("u") to Centerline of Conduit Opening Cat. #FS019 u Condulet Blank Bodies for Drilling and Tapping and for Drilling Blank Bodies Single-Gang, Multi-Gang, Tandem 2F 34 FD063 FD062 b a FD04 FS/FD039 FS/FD029 FS/FD019 Cat. # FD05 a.#abcdef e d c b FS063 a Cat. # f e d c b FS062 a Cat. # 2F 3 2 3 2 7 13 15 7 / / 8 8 / / www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 16 16 5 5 7 7 FS/FD063 FS/FD062 1 5 7 3 / / / / 8 4 4 8 14 10 77 3 18 Dimensions (InInches) Tandem Multi-Gang, Single-Gang, Blank BodiesforDrillingand Tapping Condulet 1 / 5 52 7 6 4 1 3 3 / / / 1 1 7 / / / 8 8 4 16 16 8 3 3 2 1 3 1 3 / / / / 32 16 16 16 18 15 10 3 2 1 2 1 1 / 1 1 1 1 4 3 3 / / / / / / 2 2 2 2 4 4 ® 6 6 4 4 Cast DeviceBoxes 3 1 5 3 / / / / 16 8 16 4 a.#ab a FS094 Cat. # FD094 a.#ab a FD097 FS097 Cat. # © 2013 Eaton’sCrouse-Hinds Business 2 32 2 2 3 27 1 / / 16 32 / 32 FS/FD097 FS/FD094 2 1 1 5 1 1 45 / / / 16 2 2 / 64 2F 35 2F 2013 Eaton’s Crouse-Hinds Business © Dimension AB Length of box C Overall length (including hubs) D Width of box E width (including hubs) Overall F Height of box Overall height (including hubs) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Stainless Steel Device Boxes Stainless Steel Device ® Stainless Steel Conduit Steel Conduit Stainless ®

penetration of rust/corrosion and eliminate damage to the fitting penetration of rust/corrosion and eliminate damage extreme cold conditions downs are processing and other hygienic areas where wash common and increase fittings - this will lower your total cost of ownership your return on investment cleaners to keep them looking like new system changes • help reduce the Self-healing properties of stainless steel fittings • in extreme heat and Stainless steel fittings retain their strength • clean Fitting surface is easy to maintain and keep • perfect for food Easy cleaning capabilities make these fittings • replacement of Superior strength and durability greatly reduce • environment-damaging Stainless steel fittings do not require harsh • Internal green grounding screw - standard • Tapered threads for protection of wire insulation • Wide selection of covers available • Single or double conduit entry • Ample wiring room provided for easy installations Features: Standard Materials: Standard • Bodies - 316 stainless steel • Covers - 316 stainless steel • Cover Screws - 316 stainless steel • Gasket - neoprene Certifications and Compliances: • UL Standard 514A • CSA Standard C22.2 No. 18.1-04 • Raintight - when installed with cover and gasket deliver power where you need it, saving you time and money you need it, saving you time and deliver power where the life of your facility. throughout and heat, combined with unmatched Superior resistance to corrosion steel Condulet bodies and boxes a long- strength, make stainless most extreme environments. term solution for even the Applications: installed in conduit systems to: Cast device boxes are • devices Accommodate wiring • for conductors in a conduit system Act as pull boxes • make splices and taps in conductors Provide openings to • conductors for maintenance and future Provide access to • Connect conduit systems Eaton's Crouse-Hinds Condulet Eaton's Crouse-Hinds Device Boxes,Device Gaskets Covers and Condulet 2F 36 Ordering Information-DeviceBoxCoverandGasket Blank Cover Switch FormedCover FDX DeviceBody FD DeviceBody Ordering Information FDC DeviceBody FDA DeviceBody FDS DeviceBody 2F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Covers andGaskets Condulet The UltimateinCorrosionResistanceandDurability ® Stainless SteelConduitDeviceBoxes, aao ubrTaeSz F E D C B A Trade Size FD2SS Catalog Number aao ubrTaeSz F E D C B A Trade Size FDA2SS Catalog Number aao ubrTaeSz F E D C B A Trade Size FDC2SS Catalog Number aao ubrTaeSz F E D C B A Trade Size FDX2SS Catalog Number aao ubrTaeSz F E D C B A Trade Size FDS2SS Catalog Number DS7000SF Catalog Number DS7000BC Catalog Number 3 3 3 3 3 / / / / / 4 4 4 4 4 .346 .429 .33.80 3.03 2.94 2.94 4.63 4.63 " .361 .429 .33.03 3.03 2.94 2.94 6.19 3.03 4.63 3.03 2.94 2.94 " 5.41 4.63 " .354 .429 .33.03 3.03 2.94 2.94 5.41 4.63 " .361 .445 .33.03 3.03 4.50 2.94 6.19 4.63 " Receptacle FormedCover Blank FormedCover © 2013 Eaton’sCrouse-Hinds Business DS7000RF Catalog Number DS7000BF Catalog Number 2F 37 2F " 8 / 3 1 Vertical Mount Vertical for FS and FD device boxes Cat. # Typical installation Typical 2013 Eaton’s Crouse-Hinds Business © Duplex cover Cat. # Diameter WLRD1 Horizontal Mount for FS and FD device boxes Cat. # " " 8 2 / / 3 1 1 1 600, 125 / 250, 208 / 120, 480 / 277 or 600 / 347 volts lacquer cover – die cast copper-free aluminum cover – die cast copper-free (EPDM) required for mounting on device boxes. (Order separately) For NEMA Configuration Round Receptacles For GFCI Receptacles in Wet Locations For GFCI Receptacles in Wet WLRS2 WLRS1 Horizontal Mount for flush device boxes Cat. # Single cover Cat. #*Patent Number 4,058,358 †Horizontal mount only. Diameter WLGF WLGF FS WLGF FSV Electrical Rating Ranges: Electrical Rating • 15 amperes; 125, 250, or 277 volts • 20 and 30 amperes; 125, 250, 277, 480, Spring Door Covers – with Gasket* Standard Finishes: Standard • – aluminum Copper-free aluminum Spring Door Covers – with Gasket* Standard Materials: Standard •WLGF face plate and WLRS, WLRD and • – stainless steel Cover hinge spring • resistant metal Cover screws – corrosion •propylene rubber Gasket – ethylene Accessories: • Flush mounting adapter – WLRA-1 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

covers use duty ratings do not exceed medium multi-gang boxes having individual cover openings (see Sect. 2F for listings) (see Accessories) Blade) and WD-5, 1972 (Locking Type) protection of wiring device at all times, in wet and damp locations environmental protection of wiring device at all times excellent resistance to ozone, weather and temperature extremes of –50°F to 260°F construction with aluminum lacquer finish provides maximum corrosion resistance exposed metal parts and WD-5 types except 3-phase applications; self grounded in duplex variety configurations for use with standard plugs Applications: series wiring WLRS, WLRD and WLGF to meet the device covers are designed for wet total NEC Code requirements and WLGF series locations. WLRS, WLRD in wet and covers are suitable for use damp locations: • equipment is required Wherever portable • utility receptacle As general purpose • or residential For industrial, commercial • requirements In areas where electrical • To mount FS and FD single-gang or • To mount on most flush device boxes Certifications and Compliances: • ANSI/UL Standard 514A • NEC Code 410-57 • OSHA Standards, Subpart "S" • NEMA Standards WD-1, 1974 (Straight Features: WLRS, WLRD and WLGF covers: • Self-closing spring door assures • One piece EPDM gasket provides • EPDM gasketing material offers • Die cast, copper-free aluminum • Positive ground path ensured for all NEMA configuration receptacle interiors: • Comply with NEMA Standards WD-1 • Grounded through an extra contact in all • Back and side wired • Offered in single and duplex • Specification grade For NEMA Configuration Receptacle Interiors and GFCI Receptacles Interiors Configuration Receptacle For NEMA

WLRS and WLG Wet Location Covers Location Wet WLG WLRS and Covers for Cast Iron or Aluminum Device Boxes Device Aluminum or Cast Iron for Covers 2F 38 20 Amp Grounding 3-Wire 2-Pole 15 Amp Grounding 3-Wire Volts 2-Pole Duplex Device Type 20 Amp Grounding 3-Wire 2-Pole yeVolts Type For Non-LockingBladePlugs without NEMAConfigurationReceptacles Ordering Information-Coverswith and 15 Amp Grounding 3-Wire 2-Pole Single Device *Must beusedwithawetlocationsratedwiring device. 15 Amp Grounding 3-Wire 2-Pole Single Device yeVolts Type For LockingBladePlugs without NEMAConfigurationReceptacles Ordering Information-Coverswithand 20 Amp Grounding 3-Wire 2-Pole 15 Amp Grounding Volts 3-Wire 2-Pole Duplex Device Type 2F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 250V 125V 250V 125V 250V 250V 125V 125V 125V 250V 125V 250V 125V For NEMAConfigurationReceptacleInteriorsandGFCIReceptacles Configuration NEMA Configuration NEMA Configuration NEMA Configuration NEMA WLRS and WLG Wet LocationCovers Covers forCastIronor Aluminum DeviceBoxes L6-20R L5-20R L6-15R L5-15R L5-15R 6-20R 5-20R 6-15R 5-15R 6-20R 5-20R 6-15R 5-15R LD62 WLRD1 WLRD 620 WLRD1 WLRD 520 WLRD1 WLRD 615 WLRD1 WLRD 515 sy a.# Assy. Cat. Receptacle Cover with Complete LS62 WLRS1 WLRS 620 WLRS1 WLRS 520 WLRS1 WLRS 615 WLRS1 WLRS 515 sy a.# Assy. Cat. Receptacle Cover with Complete sy a.# Assy. Cat. Receptacle Cover with Complete LSL 0WLRS2 WLRS L620 WLRS2 WLRS L520 WLRS1 WLRS L615 WLRS1 WLRS L515 LDL 5WLRD1 WLRD L515 sy a.# Assy. Cat. Receptacle Cover with Complete a.#* Cat. Gasket Only Cover & Spring Door a.#* Cat. Gasket Only Cover & Spring Door a.#* Cat. Gasket Only Cover & Spring Door a.#* Cat. Gasket Only Cover & Spring Door In Inches: Dimensions © 2013 Eaton’sCrouse-Hinds Business WLGF-FS &WLGF-FSV WLGF 2F 39 2F DS32G DS52 DS32 DS32 SA WLRA1 ® Feraloy iron alloy with gasket toggle switches – guarded. toggle switches – unguarded. 2013 Eaton’s Crouse-Hinds Business Adapter plate for mounting WLRS/ WLRD covers to flush device boxes. © For square handle general use snap or handle general use For square For square handle general use snap or For square DescriptionSurface Materialor flush Cat. # Description MaterialSurfaceSurface Sheet steel Cat. # Sheet aluminum Surface Sheet steel DescriptionFlush Device Adapter Cat. # Also can be used to mount all covers with four corner screws listed see pages 37, 39, 40, 41, 42 and 43 to flush device boxes. See page 42 for receptacle specifications and listings of complete receptacle/cover combinations. †Must be used with a wet locations rated wiring device. " 8 / 5 DS35 DS23 DS23 SA DSS23 DS23G DS23 GFI ® iron alloy Feraloy opening diameter. For GFI receptacles. receptacles. Gasket included. receptacles. For standard and 3-pole, 2-wire For standard grounding type duplex convenience grounding For duplex convenience receptacles. For flush plug receptacle requiring 1 requiring For flush plug receptacle DescriptionSurface or flush Material Cat. # Description MaterialSurfaceSurfaceFlush Sheet steel Cat. # Sheet aluminum Sheet steel DescriptionSurface Material Cat. Sheet steel # DescriptionSurface Material Cat. # Sheet steel ". 16 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright / 7 DS100 DSS100 DS100G DS21 DS21 SA DS21G ® Sheet aluminum Feraloy iron alloy with gasket Cast aluminum

DS21 DS21G

grounding type round flush type round grounding taps where device not used. taps where For standard and 3-pole, 2-wire For standard receptacles. Opening diameter 1 receptacles. Blank cover with gasket for enclosing Blank cover for enclosing splices and Blank cover for enclosing splices and taps where device not used. device splices and taps where Description MaterialSurface or Flush Cat. # DescriptionSurface MaterialSurface Cat. # Sheet steel Surface or flush Flush Sheet steel Description MaterialSurface Sheet aluminum Cat. # Ordering Information Ordering Single Gang Covers for Cast Iron or Aluminum Device Boxes Device Aluminum or Cast Iron for Covers 2F 40 Ordering Information ecito aeilCt # Cat. operation ON-OFF Material For standard Description 2F For generalusesnapswitches. www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Includes gasket. aluminum Copper-free Covers forCastIronor Aluminum DeviceBoxes Single Gang-RaintightCovers(GasketIncluded) DS181 lock # Cat. With holefor operation. Material ON-OFF For standard Description For generalusesnapswitches. Includes gasket. aluminum Die cast © 2013 Eaton’sCrouse-Hinds Business DS185 handle # Cat. ON-OFF Marked Material operation. For standard Description For generalusesnapswitches. Includes gasket. aluminum Cast DS128 2F 41 ➀ ➀ ➀ ➀ ED11 ED12† 2F DS171F DS171G DS171 DS171J iron alloy iron alloy iron alloy iron alloy Feraloy Feraloy Feraloy Feraloy 2013 Eaton’s Crouse-Hinds Business © 1 Red Raintight Push Buttons Includes gasket. Heavy duty motor control push button switch Heavy duty motor control Furnished with buttons for operating motor control push button switches. push button switches. Furnished motor control with buttons for operating If desired, markings on indicating plates may be added to catalog number. Select from the list of If desired, markings on indicating plates may be added to catalog †Two universal contact blocks, must be wired as two circuits, with one normally open and one normally closed. No. of Buttons1 Normal Positions 1 circuit universal Cat. # DescriptionButton (normally open) marked START 1 Green No. Color Material Cat. # 2 2 circuits universal Button (normally closed) marked STOP 1 Red Button (normally open) marked 1 Green Description No. Color Material Cat. # START and button (normally closed) marked STOP Two push button 2 Black DS Covers use the switches shown in the list below. CoverDS171DS171GDS265 Switch Takes ED12 ED11 ED11 Cover Switch Takes DS171F DS266 ED11 ED12 HANDEMER.REVERSELGT. ON CLOSE DOWN STOP OFF JOG TRIP AUTO. FORWARD OPEN START UP ON RESET RUN TEST standard markings below: ➀ www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright DS199 Feraloy iron alloy Fits FS and FD boxes. Takes For manual motor starting switches. and MST02 (2-pole). Includes gasket. Westinghouse switches MST01 (1-pole) Westinghouse DescriptionFor standard ON-OFF operation Material Cat. # Single Gang - Switches and Motor Control Push Button Motor Control - Switches and Single Gang Ordering Information Ordering Covers for Cast Iron or Aluminum Device Boxes Device Aluminum or Cast Iron for Covers 2F 42 Neoprene–natural(blackoryellow) • Copper-freealuminum–natural • • Standard Finishes: Outdoorsorinlocationswherefrequent • Whereverdust,dirt,moistureand • WP plugsandDSreceptaclesareused: Applications: Plugexteriors:hood–Neoprene; • 20amperes,125,250volts • 15amperes,125volts • Electrical RatingRanges: Receptaclehousings:body– • Standard Materials: *Compliance. CSAStandard:C22.2No.42* • NEMA/EEMAC:WD-1;WD-5 • ULStandards:498;514A • Compliances: Certifications and Analuminumringwhichclampsthe • AmoldedNeoprenehoodwithintegral • WP plugsinclude: Athreadedcapwhicheffectivelyseals • Withsinglegang,twogangtandemand • WithFSandFDcastdeviceboxes, • DS receptaclehousingsareused: Features: and aluminumacrylicpaint Feraloy food processingplants washdowns occur,asindairiesand corrosion areaproblem fastening ring–copper-freealuminum iron alloy;cap–copper-freealuminum use complete watertightsealwhenplugisin hood toreceptaclehousingface, sleeve tosealthecordentrance housing whennotinuse cover openings multiple gangboxeshavingindividual in awall either surfacemountedorinstalledflush 2F iron alloy–electrogalvanized www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Single Gang-DSReceptaclesand WP Plugs Covers forCastIronor Aluminum DeviceBoxes Feraloy ® o itn ftpclF atdvcsbxs sepgs23and24. For listingoftypicalFScastdevicesboxes,seepages *Compliance †Third polegrounded. 250 volts 20 amps 125 volts 20 amps Rating For PlugswithUshapedorRoundGrounding Contacts Grounding Type Receptacles 125 volts 15 amps DS Receptacle housings DS290 Style DS222 Diagram # Cat. Recept. Cover With DS96* EA -5 NEMA:5-15P NEMA: 5-15R EA -0 NEMA:6-20P NEMA:5-20P NEMA: 6-20R NEMA: 5-20R © 2013 Eaton’sCrouse-Hinds Business 3-pole† 2-wire, 3-pole† 2-wire, 3-pole† 2-wire, PPusCCReplacement WP Plugs a.#DarmCord Dia. Diagram # Cat. Plug WP820 WP930 WP832 Weatherproof receptacle .625 .500 to .625 .500 to .625 .500 to a.# Cat. Recept. Repl. CC55 CC90 CC71 2F 43 2F FS031 GASK91‡ boxes and covers. used with multi-gang bodies 2013 Eaton’s Crouse-Hinds Business Gaskets for use between device having individual cover openings. © FS flush mounting adapter (can be FS flush mounting adapter Furnished with gasket and screws) Mtg. StyleWall Cat. # MaterialNeoprene Cat. # ‡Not recommended as watertight. C333 EXF21 EXF11 Lamp Base Watts Cat. # receptacles with housings) receptacles " rectangular wiring devices, or plug wiring devices, or rectangular 2 / 1 Pilot light (with transformer)†, FD only Pilot light (with transformer)†, EXF Extensions (takes covers and flush Ext. Depth1" 2 Cat. # †Transformer 50–60 cycle, 440 / 110 volts. 440 Candelabra 6 Circuit Voltage www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright DS24 C3310 DS24G Jewel Color Cat. # Red Jewel Color Cat. # Feraloy iron alloy For pilot light units For pilot light units (furnished with jewels) Lamp Base Watts Cat. # (furnished with jewel and gasket). Pilot light unit (without transformer) Circuit Voltage 110 Candelabra 6 DescriptionSurface Material Sheet steel Red Surface or flush Description Material Covers for Cast Iron or Aluminum Device Boxes Device Aluminum or Cast Iron for Covers Ordering Information Ordering Single Gang - Pilot Light Covers, - Pilot Light Single Gang Adapters and Extensions 2F 44 Ordering Information aeilCt # Cat. Sheet steel Material ecito aeilCt # Cat. Material Surface flush receptacles. For roundplug Description ecito aeilCt # Cat. Material Surface flush receptacles. For roundplug Description For flushgeneralusesnapswitches 2F switches withsquare handles For flushgeneralusesnap For standard and2-wire, with square handles www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 3-pole grounding Two Gang Sheet steel Sheet steel Covers forCastIronor Aluminum DeviceBoxes S32232 S32212 S212 ecito aeilCt # Sheetsteel Cat. Material Surface Description ecito aeilCt # Cat. Sheetsteel Material 2-pole, Surface Description ufc Sheetsteel # Cat. Material Surface Description ufc Sheetsteel # Cat. Material Surface Description standard and2-wire, 3-polegrounding For duplexconveniencereceptacles, For round flushreceptacles, duplex convenience receptacles, standard For 20amp.,250voltreceptacles and 2-wire, 3-polegrounding For GFIreceptacles © 2013 Eaton’sCrouse-Hinds Business S232 GFI S21232 S232 S612 ecito aeilCt # Cat. Material flush Surface or Description ecito aeilCt # Cat. Material Surface Description ecito aeilCt # Sheetsteel Cat. Material Surface Description flush Surface or flush Surface or Blank. For flushgeneralusesnapswitches switches withsquare handles For flushgeneralusesnap Feraloy with square handles ® Sheet steel iron alloy Feraloy aluminum Copper-free iron alloywithgasket iron alloy Feraloy S1002 S1002G S1002G SA S322G S322 2F 45 S324 2F GASK434 GASK460 GASK461 with square handles with square device box and cover Gasket for use between 2013 Eaton’s Crouse-Hinds Business For flush general use snap switches For flush general use © DescriptionSurface, four gang† steel Sheet Material Cat. # †For FS094 and FD094 boxes. DescriptionTwo gang Material Cat. # Rubber Three gangFour gang Rubber Rubber S323 S1004G S1003 S1003G S1003G SA Feraloy iron alloy Feraloy iron alloy Copper-free aluminum Blank with gasket Blank with gasket with square handles with square For flush general use snap switches DescriptionSurface or flush Material Cat. # *Includes gasket DescriptionSurface Material Cat. # Sheet steel Surface or flush Surface or flush DescriptionSurface, three gang Sheet steel Material Cat. # www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright DS1283 DS1282 ® Feraloy iron alloy Feraloy iron alloy With operating mechanism and gasket With operating mechanism and gasket DescriptionThree gang with gasket. For external operation Materialof general use Cat.snap switches. # Surface or flush. DescriptionTwo gang. For operation of general use snap Materialswitches. Surface Cat. # or flush Ordering Information Ordering Covers for Cast Iron or Aluminum Device Boxes Device Aluminum or Cast Iron for Covers Two Gang Two 2F 46 2"integralhubforpolemounting. • Size: 120V 15A • Electrical Ratings: Copper-freealuminum–natural • Standard Finishes: Bodyandcover–copper-freealuminum • Standard Materials: CSAStandardC22.2No.18 • Compliances: Certifications and Breakerscannotbemanuallytripped. • Circuitbreakerprotection. • Ugroundduplexreceptacle. • Suitableforavarietyofcombinations. • Compactdesign. • Features: FSEseriesassembliesareusedin • Applications: camps, etc. marinas, drive-intheaters,trailer lots, automobileengineblockheaters, remote locations,particularlyparking outdoor areasforsupplyingpowerin FFSEReceptacleandBreaker Assemblies 2F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Ordering Information FSE61211 FSE61212 FSE6122 FSE6121 Description FSE612 # Cat. Fitting completewith1-15amp.duplexreceptacleandone1-poleMinibreaker. Fitting completewith1-15amp.duplexreceptacleandtwo1-poleMinibreakers Fitting completewith2-15amp.duplexreceptacles. Fitting completewith1-15amp.duplexreceptacleandblankcover. Double facereceptaclebodyonly Other combinationsavailableonrequest S 11FSE612 FSE 6121 © 2013 Eaton’sCrouse-Hinds Business 3F 47 3F see page 48 see page 57 see page 58 see page 54 see page 55 see page 56 see page 53 see page 61 see page 62 see page 63 see page 63 see page 60 see page 62 see page 61 see page 61 see page 59 see pages 50–51 2013 Eaton’s Crouse-Hinds Business © C30 and C31 for IEC Applications CPS GUA EAB EAB ATEX EAJ GUR Universal ET FT HTL STL EKC FE LBH LBY OE Short Radius 90° Elbow Rectangular Round Cylindrical Lubricants DescriptionApplication/Selection Page No. Tees Conduit Bodies & Outlet Boxes Conduit Bodies & Outlet www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

Conduit Bodies and Outlet Boxes Outlet and Bodies Conduit ® Hazardous Condulet 3F 3F 48 Actassealingfittings(withappropriatecovers) • Actasmountingoutletsforfixtures(withappropriatecovers) • Provideaccesstoconductorsformaintenanceandfuturesystem • Changeconduitdirection • Connectlengthsofconduit • Actaspullandspliceboxes • Protectconductors • conduit systemsinClassIandIIhazardouslocationsto: Hazardous areaconduitbodiesandoutletboxesareinstalledinrigid Applications: • Lubricant(STLandHTL)areavailabletomakejointsraintight, • Flatblankcovers(surfaceandflangedflush),fixturesupport • Options andAccessories: Quick SelectorChart K ,D E ,GPulling Pulling C,DE,F,G EKC C,DE,F,G LBY U ,D E ,GPulling,splicing Flameproof,Exd,IIB, Stubup C,DE,F,G Flameproof,Exd,IIB, Fixt.support,pulling, GUR 3 Pulling,splicing,taps 3 FE Pulling,splicing,taps C,DE,F,G ExII2GEExdIICT6 FT C,DE,F,G ET II2GEExdIICT5 A,B,C,DE,F,G CPS A,B,C,DE,F,G EAB ATEX A,B,C,DE,F,G EAB C30 /C31 EAJ †See followingtableforstandardhubconfiguration. Series B ,C ,F Pulling Pulling B,C,DE,F,G LBH C,DE,F,G OE U ,D E ,GMtg.ltg.fixt.,taps,pulling, C,DE,F,G GUA changes request. Corro-free temperature range. provide foreasycoverremovalandtolubricateshaftsoverawide listing fordetails. sealing coversandextensionsareavailable.Seespecificproduct www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright ™ epoxypowdercoat–informationavailableon Groups Class I&II NEC Outlet Boxes Application andSelection Condulet ® Conduit Bodiesand Ex II2DIP66T85ºC 21 &22 Combustible DustZone IP67, Zone1 21 &22 Combustible DustZone IP67, Zone1 PTB 05ATEX1052 Certifications IEC uln,slcn,tp 98mm(C30) Pulling, splicing,taps uln 20mm- 20mm- Pulling Stub up splicing 3 Pulling, splicing,taps Function Normal splicing Materialandfinish–determinefromenvironmentalconditions • Hubsizeandconfiguration–dependentontheconduitsystem • Boxesusedtospliceand/ortapconductorsshouldbelarge • Boxesusedforwirepullingshouldgenerallybelargertoprovide • i.e.,boxesusedasmountingsforlightingfixturesaregenerallyof • Eachproductfamilyhasfeaturessuitableforspecificfunctions: • Establishfunctionalphysicalrequirementsthesewillhelpto • DeterminetheareaclassificationperNationalElectricalCode • Considerations forSelection: © (corrosive fumes,weather,buriedinconcrete,etc.) configuration andtheconduitsizeused. size andnumberofconductors. enough topermiteaseofworkandsufficientroomfortherequired room foreasypulling. support lightingfixtures. a smallsize,andprovidedwithmountinglugswhenrequiredto installation. determine boxsize,cover,shapeandmountingfortheparticular location.: product familiesthatareacceptableforuseintheparticular Hazardous AreaGroups.Basedonthisclassification,selectthe 2013 Eaton’sCrouse-Hinds Business 130mm (C31) 3 Diameter Opening Cover 2–5 1 3 3 / / / 2 4 16 & 5 25mm 25mm 1 1 1 1 1 1 1 1 1 1 1 1 Size† Hub / / / / / / / / / / / / 2 2 2 2 2 2 2 2 2 2 2 2 1Threaded Groundjoint -1 -3 Groundjoint -4 Groundjoint -1 -1 Threaded Threaded -1 Threaded -1 Threaded -1 Threaded -2 -2 – 1 & 3 / 1 4 / 4 Threaded Threaded Threaded Ground joint Type Cover 3F 49 CPS GUR 3F C31 C30 / FT 2013 Eaton’s Crouse-Hinds Business C31 C30 / © EKC see page 60 ET see page 61 see page 62 FE EABC EABL EABT EABX EABY EAJB EAJC EAJD EAJL EAJT EAJX OELB OEC OELL OELR OET www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright GUA GUAB GUAC GUAD GUAL GUAM GUAN GUAT GUAW GUAX Hub Style Conduit Bodies and Bodies Conduit ® see page 58 see page 54 see page 56 see page 59 see page 53 see page 57 see pages 50–52 OE EAJ EAB CPS GUA GUR C30 / C31 LBH see page 61 LBY see page 61 see page 62 The fittings below are available only in the configurations shown. The fittings below are Shape Series Page Condulet Standard Shape and Hub Selector Shape and Hub Standard Outlet Boxes Outlet 3F 50 Hub– • Size Ranges: Aluminum–natural • • Standard Finishes: Covers–Copper-freealuminum • Bodies– • Standard Materials: NEMA/EEMAC3,4 • CSAStandard:C22.2No.30 • ANSIStandard:C33.27 • ULStandard:1203 • NEC/CEC: • Compliances: Certifications and Coverthreadsare12pitch • Sealingcovers,domeandfixture • Surfacecoversfurnishedwithboxes • Smoothintegralhubbushingprotects • Taperthreadedhubstoprovide • Tendifferenthubarrangements • Threadedcoveropenings • Fourstandardmountingpadsexceptfor • Castearsoncovertopermiteasy • Neoprene"O"ringstandardtomeet • GUA conduitboxeshave: Features: Actassealingfittings(withappropriate • Actasmountingoutletsforfixtures • Provideaccesstoconductorsfor • Changeconduitdirection • Connectlengthsofconduit • Actaspullandspliceboxes • Protectconductorsinthreaded • systems to: installed withinhazardousareaconduit GUA seriesconduitoutletboxesare Coveropening–2"to5" dia. • Applications: aluminum acrylicpaint Feraloy hanger coversareavailable conductor insulationwhenpulling grounding continuity boxes withbottomhubs removal andtightening NEMA 4requirements covers) (with appropriatecovers) maintenance andfuturesystemchanges rigid conduit Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsC,D 3F 1 / 2 iron alloy–electrogalvanizedand " to2" Feraloy www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Boxes With Covers Boxes With iron alloy GUA Series Condulet ® Conduit Outlet GUAC GUA horizontal orverticalpositions.Use E, F,G;andClassIII.Sealscanbemadeineither hazardous areas–ClassI,GroupsC,D;II, outlet boxesprovideadequatesealingfor40%fillin When assembledwithsealingtypecover,GUAseries Suffix Covers – Bodies –copper-freealuminum Description Options: is aGUA06-GB. Covers have16pitchthreads.Replacementcover Class II,Division1,GroupsE,F,GandIII. are listedforClassI,Division1&2,GroupsB, CandD, outlet boxesmarkedwith*whenordered suffix-SA *Available incopper-freealuminum,addsuffix -SA.GUA †Available incopper-freealuminum,addsuffix -SA. catalog numberie.GUAT260. To orderboxlesscoveradd"0"toendof Corro-free with viewingwindow. are availablewithoptionalcover GUA Form6(with3"coveropening) acrylic paint electrogalvanized andaluminum sealing compoundistobeusedperNEC. or connectionsmustnotbemadeinenclosureswhere compound or 1 25 1 1 13 3 1 3 1 Size Hub 3 1 3 1 Size Hub 1 1 13 / / / / / / / / 4 2 4 2 4 2 4 2 1 1 1 1 1 / / / / / 2 4 4 2 4 Feraloy 5 5 3 3 3 2 2 i.Ct # Cat. Dia. Opening Cover Chico i.Ct # Cat. Dia. Opening Cover 5 3 3 3 2 2 epoxy powdercoat 5 5 / / 8 8 ® SpeedSeal only.Conductorsplices iron alloy– EA3 ,7D 9EFG 7CD, 4, NEMA 3, III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. II, Cl. D GroupsC, 1&2, Div. I, Cl. © GUAC47† GUAC69† GUAC59† GUAC49 GUAC36* GUAC26* GUAC16* GUAC24† GUAC14† Chico 2013 Eaton’sCrouse-Hinds Business GUA47 GUA59 GUA36 GUA26* GUA16 GUA24 GUA14 ® "A" sealing WOD S752 SA†* VW GUAB 1 – 1 Hub Size Length ofHub 1 GUAD In Inches: Dimensions / 25 1 13 3 1 3 1 Size Hub 1 a.#abcd 69 59 49 c 47 37 36 b 26 16 24 a 14 # Cat. GUAW, GUAX GUA, GUAD,GUAM, 1 13 3 1 3 1 Size Hub / / / / 2 / / / / 1 4 2 4 2 4 2 4 2 / 1 1 1 / / 2 / - 2 4 4 – 2 3 / 1 GUAB Only 4 / 4 5 3 3 3 2 2 i.Ct # Cat. Dia. Opening Cover i.Ct # Cat. Dia. Opening Cover 5 3 3 2 2 5 / 5 5 5 4 4 3 3 3 2 2 8 3 3 3 1 1 1 1 1 1 1 / / / / / / / / / / 4 4 4 4 4 2 2 2 2 2 Wet Locations Raintight Dust-Ignitionproof Explosionproof 4 3 3 2 2 2 21 21 22 1 1 13 13 11 5 5 13 / / / 16 16 16 / / / / Length Dimension "e" 1 1 7 16 16 16 16 / 8 1 / 16 GUAB69† GUAB59† GUAB36* GUAB26* GUAB16* GUAB24 GUAB14† GUAB47† GUAD36† GUAD49 GUAD26† GUAD16 GUAD24 GUAD14† All others 41 3 3 2 2 2 1 3 3 3 3 3 7 7 3 / / / / / / / / 4 4 4 8 16 8 8 4 7 7 3 5 5 1 1 1 3 / / / / / / 8 8 4 8 4 8 9 9 3 3 / / / / 16 32 32 32 3F 51 32 32 32 16 / / / / 3 5 9 9 8 4 8 4 8 / / / / / 1 1 1 5 3 5 3 7 3F 16 16 8 8 16 4 4 4 / / / / / / / / 3 3 3 3 3 7 7 7 2 2 3 3 41 2 2 GUAT14† GUAT24† GUAT16* GUAT26* GUAT36* GUAT49† GUAT59† GUAT69† GUAT37 GUAT47† GUAW14† GUAW24† GUAW16 GUAW26*† 16 16 16 / / / 16 16 4 2 / / / / 5 11 13 13 1 1 1 2 2 3 3 4 2 2 21 21 2 4 4 4 4 2 2 2 2 / / / / / / / / / 1 1 3 3 3 1 1 1 1 8 8 / / 3 4 5 5 5 2 2 3 3 5 5 Cover Opening Dia. Cat. # 2 2 3 3 3 5 5 2 2 3 3 Cover Opening Dia. Cat. # 4 4 2 2013 Eaton’s Crouse-Hinds Business / / / 1 1 1 2 4 2 4 2 4 2 4 / / / / / / / / © 36 47 49 59 69 Hub Size 1 3 1 3 GUAB, GUAL Cat. #14 a24 16 26 b c d Hub Size 1 3 1 3 13 13 1 25 1 1 GUAW GUAT Class I, Division 1 & 2, Groups B, C and D, Class II, Explosionproof Dust-Ignitionproof Raintight Locations Wet 32 32 16 / / / 3 9 9 8 8 4 4 4 / / / / / 1 7 5 3 3 3 8 4 16 4 8 8 / / / / / / 3 3 1 1 7 7 2 2 41 41 2 2 GUAN47 GUAN14 GUAN24 GUAN16 GUAN26 GUAN36† GUAN59† GUAN69 GUAM14† GUAM24 GUAM16 GUAM26 GUAM36 GUAM47 GUAM69 16 / 16 16 16 8 16 / / / / / 5 11 1 1 1 5 2 2 4 4 2 2 21 21 2 4 4 4 2 2 2 2 / / / / / / / / 1 1 3 3 1 1 1 1 8 8 2 2 3 3 3 4 5 5 / / 5 5 2 2 3 3 3 5 Cover Opening Dia. Cat. # Cover Opening Dia. Cat. # 2 2 3 3 3 4 4 2 / / / Cl. I, Div. 1 & 2, C, Groups D Cl. II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 7CD, 9EFG 1 1 1 2 4 2 4 4 2 4 2 / / / / / / / / GUAN Cat. #14 a24 16 26 b36 47 59 c69 d Hub Size 1 3 1 3 3 1 3 GUAN Hub Size 1 13 1 1 25 13 1 25 GUAM 32 32 32 16 / / / / 3 5 9 9 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 8 4 8 4 8 8 / / / / / / 3 1 1 1 5 5 3 7 7 16 8 8 16 8 4 4 4 / / / / / / / / 3 7 7 3 3 3 3 3 2 2 2 2 3 3 41 GUAX37† GUAX47† GUAX49 GUAX59† GUAX69† GUAX14† GUAX24† GUAX16* GUAX26* GUAX36* GUAL47† GUAL14† GUAL24† GUAL16* GUAL26*† GUAL36* GUAL49† GUAL59† GUAL69† 16 16 16 / / / 4 16 16 16 / / / / 1 5 5 11 13 13 1 2 22 21 21 2 2 2 3 3 4 Conduit Outlet Outlet Conduit ® 4 2 2 2 2 2 4 4 4 4 / / / / / / / / / / 3 1 1 1 1 1 1 1 3 3 8 8 8 / / 2 3 3 3 4 4 5 5 5 2 / 5 5 5 3 5 5 2 2 3 3 Cover Opening Dia. Cat. # 3 5 5 2 2 3 3 Cover Opening Dia. Cat. # 4 4 2 4 4 2 / / / / / / 1 1 1 1 1 1 2 4 2 4 2 4 2 4 / / / / / / / / 1 1 13 1 1 25 1 1 25 13 13 69 24 16 26 36 37 47 49 59 Dimensions GUAC, GUAT Cat. #14 a b c d Hub Size 1 3 1 3 Hub Size 1 3 1 3 †Available in copper-free aluminum, add suffix -SA. for *Available in copper-free aluminum, add suffix -SA. GUA outlet boxes marked with * when ordered with suffix -SA are listed Division 1, Groups E, F, G and Class III. Covers have 16 pitch threads. Replacement cover is a GUA06-GB. GUAX GUAL Condulet Series GUA Boxes With With Boxes Covers 3F Covers and Accessories

For GUA Condulet® Conduit Outlet Boxes

Applications: GUA Threaded Extension Sealing Cover 3F Threaded covers, canopies and extensions are used: • To provide a seal in hazardous areas (sealing cover). See note below. • To mount pendant lighting fixtures such as EVA listed in lighting section (fixture canopy) Cover Cover • To mount EVA pendant lighting fixtures Opening Ext. Opening Thread on cover which is then screwed into Dia. Depth Cat. # Dia. Pitch Cat. # 1 outlet box without twisting conductors 31/4 GUA0631 212GUA041 (union hub cover) 312GUA062 • To mount pendant lighting fixtures on GUA 316GUA062 GB* 5 cover which is then screwed into outlet Cover Replacement O-Ring 3 /8 12 GUA072† box as above, for wiring after fixture Opening Gasket Cat. # 512GUA092 stem is installed (nipple cover) 2" GASK1713 • To provide means of increasing outlet 3" GASK1151 Nipple Cover 5 box depth (threaded extension) 3 /8" GASK1589 5" GASK925 Features: • Surface covers are supplied with GUA boxes Surface Cover • Sealing cover has removable plug for filling enclosure with sealing compound after installation. Sealing cover meets Cover Fixt. 40% fill requirement of the NEC®. See Opening Stem Thread note below. Dia. Size Pitch Cat. #

3 • Fixture canopy has a threaded cover in 3 /4 12 GUA0672 its side to provide access for making Cover splices or taps. Fixture with its conduit Opening Thread stem and canopy can be assembled and Dia. Pitch Cat. # Fixture Cover Union Hub Type wired before installation and conductors 212GUA04 can be spliced in canopy after it has 312GUA06 been screwed into the body 316GUA06 GB* 5 • Cover threads are 12 pitch. 3 /8 12 GUA07 512GUA09 Standard Materials: • Surface and dome covers, union hub Dome Cover covers, nipple covers – copper-free aluminum Cover Fixt. Opening Stem Thread • Sealing covers, fixture canopies, Dia. Size Pitch Cat. # threaded extensions – Feraloy® 3 iron alloy 3 /4 12 GUA0687 Standard Finishes: Fixture Canopy • Aluminum – natural • Feraloy iron alloy – electrogalvanized Cover and aluminum acrylic paint Opening Ext. Thread Dia. Depth Pitch Cat. # Options: 2212GUA047 Description Suffix 3212GUA067 ™ 5 Corro-free epoxy powder coat S752 3 /8 212 GUA077 5 To order an iron surface cover WOD 3 /8 412 GUA0716 Cover Fixt. 5412GUA514 Opening Stem Thread 51012GUA5110 Size Ranges: Dia. Size Pitch Cat. # 3 3 • Fixture stems – /4" 3 /4 12 GUA068 • Body openings – 2" to 5" †Also used with GUP bodies see page 753 or GU and GUE bodies see page 722. Note: Depth of sealing compound in body must satisfy *GUA covers with 16 pitch threads are used with GUA requirements of NEC section 501-5 (C-3). Splices and bodies ordered with -SA suffix identified with * symbol taps in sealing fittings are prohibited by NEC. see pages 50–51.

52 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 3F 53 3F GUR1 GUR2 GUR3 2013 Eaton’s Crouse-Hinds Business © Explosionproof Dust-Ignitionproof Raintight Locations Wet " " 2 4 / / Ordering Information: Ordering Hub Size1 3 Cat. # 1" Dimensions In Inches: Cl. I, Div. 1 & 2, C, Groups D Cl. II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III NEMA 4 SA www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright iron alloy ® Conduit Outlet Outlet Conduit ® Feraloy iron alloy – electrogalvanized with aluminum acrylic paint Class I, Division 1 and 2, Groups C and D Class II, Division 1, Groups E, F and G Class III Zone 1 and 2 Feraloy requirements when pulling system changes Applications: • Covers – copper-free aluminum Options: DescriptionBodies – copper-free aluminum Suffix Standard Materials: Standard • Bodies – Finishes: Standard • • Aluminum – natural Certifications and Compliances: • NEC/CEC • UL Standard 1203 • cUL to CSA Standard C22.2 No. 30 • NEMA 4 Features: GUR outlet boxes feature: • Neoprene O-ring standard in cover to meet NEMA 4/UL Type 4 • Internal green ground screw • Five standard hubs with three pipe plugs included • Threaded cover opening • and removal Recesses in cover to assist in cover tightening •conductor insulation Smooth, integral hub bushing to protect • Compact design for confined spaces • UL and cUL listing • Optional all-aluminum construction GUR conduit outlet boxes are installed within hazardous areas: GUR conduit outlet boxes • in threaded rigid conduit To protect conductors •splice boxes To act as pull and • of conduit To connect lengths • to conductors for maintenance and future To provide access • direction To change conduit • such as underneath gasoline pumps Where space is limited, Condulet GUR Series Boxes With With Boxes Covers 3F 54 Applications: ecito Suffix Hub– • Size Ranges: Corro-free acrylic paint electrogalvanized andaluminum Covers – Bodies –copper-freealuminum Description Options: Bodies– • Standard Materials: Aluminum–natural • • Standard Finishes: CSAStandard:C22.2No.30 • ULStandard:1203 • NEC/CEC: • Compliances: Certifications and Coverthreadsare16pitch. • Fourstandardmountingpads, • Neoprene"o"-ringgasketandgreen • Surfacecoversfurnishedwithboxes • Threadedcoveropenings • Smoothintegralhubbushingtoprotect • Taperthreadedhubstoprovideground • Fivedifferenthubconfigurations • EAB seriesconduitoutletboxeshave: Features: Provideaccesstoconductorsfor • Changeconduitdirection • Interconnectlengthsofconduit • Actaspullandspliceboxes • Protectconductorsinthreaded • Provideprotectionagainstexterior • hazardous areasto: installed inconduitsystemswithin EAB seriesconduitoutletboxesare Coveropening–3" dia. • Covers–Copper-freealuminum • aluminum acrylicpaint Feraloy except forEABY. ground screwarebothstandard. conductor insulationwhenpulling continuity maintenance andfuturesystemchanges rigid conduit and otherhazardousgasesarepresent explosion whereacetylene,hydrogen Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsA,B,C,D 3F 1 / Feraloy 2 – electrogalvanizedand " to1" epoxy powdercoat Feraloy www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Boxes With Covers Boxes With iron alloy– ® EAB Series Condulet iron alloy ® WOD S752 SA†* Conduit Outlet In Inches: Dimensions EABL EABT EABC *EAB0687 islistedforGroupC&Donly. †Available incopper-freealuminum,addsuffix -SA. 1 ieCt # Cat. 3 1 Size Hub # Cat. 3 1 Size Hub # Cat. 3 1 Size Hub 1 1 / / / / / / 4 2 4 2 4 2 EAB Series EABC36† EABC26 EABC16† EABT36† EABT26† EABT16† EABL36† EABL26† EABL16† NEMA 3,4,7ABCD,9EFG III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. D II, C, Cl. B, Groups A, 1&2, Div. I, Cl. © 2013 Eaton’sCrouse-Hinds Business Union HubType Fixture Cover EABY EABX a.#abcdef e d c 36 b 26 16 a # Cat. EAB Series # Cat. Replacement O-Ring Description # Cat. Replacement O-Ring: 3" Size Replacement Cover: # Cat. 3 1 Size Hub 3" Dia. Opening Cover 1 ieCt # Cat. 3 1 Size Hub / / / / 4 2 4 2 3 3 3 3 3 3 / / / 4 4 4 2 2 2 25 25 17 EABY26† EABY16† EABX36† EABX26† EABX16† 3 ieCt # Cat. Size Stem Fixt. / / / / 4 32 32 32 EAB06 Wet Locations Raintight Dust-Ignitionproof Explosionproof 1 1 1 3 3 1 / / / 4 4 2 7 7 3 EAB0687* / / / GASK1151 4 8 8 5 5 5 9 9 5 / / / 16 16 16 3 3 3 3 3 3 / / / 32 32 32 3F 55 32 32 32 / / / 3 3 3 3 3 3 3F 16 16 16 / / / 5 9 9 5 5 5 GASK1151 8 8 4 EAB0687* / / / 7 7 3 4 4 2 / / / EABY16 ATEX EABY26 ATEX EABY16 SA ATEX EABY26 SA ATEX 3 3 1 1 1 1 EAB06 4 32 32 32 / / / / Fixt. Stem Size Cat. # 3 25 25 17 Iron Iron 2 2 2 ® ® 4 4 4 / / / 3 3 3 3 3 3 Feraloy Copper-free Aluminum Feraloy Copper-free Aluminum 2013 Eaton’s Crouse-Hinds Business 2 2 4 4 Explosionproof Dust-Ignitionproof Raintight Locations Wet / IP66 4 Enclosure Type / / / / © Cover Opening Dia. 3" 26 36 EAB Series Cat. # a16 b c d e f Size3" Replacement O-Ring: Cat. # DescriptionReplacement O-Ring Cat. # Hub Size Material Body 1 Cat. # † 1 3 3 Replacement Cover: Fixture Cover Fixture Union Hub Type EABY S752 WOD Suffix to be to Suffix added to Cat. # EABX16 SA ATEX EABX26 SA ATEX EABX16 ATEX EABX26 ATEX EABX36 ATEX EABX36 SA ATEX iron EAB Series Iron Iron Iron ® ® ® epoxy " to 1" 2 Feraloy / 1 Feraloy Copper-free Aluminum Feraloy Copper-free Aluminum Copper-free Aluminum Cl. I, Div. 1 & 2,A, Groups B,Cl. C, II, D Div. 1 & 2, E, Groups T5 F,d IIC II 2 G EEx G 1052 ATEX PTB 05 Listed UL and cUL 2 2 4 4 / / / / 1 Feraloy Hub Size Body Material1 Cat. # † 1 3 3 1 •3" dia. Cover opening – †Available with 6-point Phoenix MBK type terminal block mounted on DIN rail. Add suffix DIN16 before ATEX. Ordering example: EABX26 DIN16 ATEX *EAB0687 is listed for Group C & D only. Dimensions In Inches: EABX Options: Description Size Ranges: • Hub – Corro-free Covers – alloy – electrogalvanized and aluminum acrylic paint powder coat www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright iron alloy or copper- ® Conduit Outlet Outlet Conduit ®

Feraloy – electrogalvanized and

Class I, Division 1 & 2, Groups A, B, C, D Class II, Division 1 & 2, Groups E, F, G Class III II 2 G EEx d IIC T5 PTB 05 ATEX 1052 free aluminum Feraloy aluminum acrylic paint C22.2 No. 30 continuity conductor insulation when pulling ground screw are both standard. explosion where acetylene, hydrogen explosion where acetylene, are present and other hazardous gases rigid conduit maintenance and future system changes • Covers – Copper-free aluminum Standard Finishes: Standard • • Aluminum – natural Standard Materials: Standard • Bodies – Certifications and Compliances: • NEC/CEC: • UL Standard: 1203 • cUL Listed to CSA Standard: • Type 4 Enclosure • IP66 Features: EAB ATEX series conduit outlet boxes have: • Two different hub configurations • Taper threaded hubs to provide ground • Smooth integral hub bushing to protect • Threaded cover openings • Surface covers furnished with boxes • Neoprene "o"-ring gasket and green • Cover threads are 16 pitch. EAB ATEX series conduit outlet boxes are EAB ATEX series conduit within installed in conduit systems hazardous areas to: • against exterior Provide protection • in threaded Protect conductors • boxes Act as pull and splice • of conduit Interconnect lengths • Change conduit direction •conductors for Provide access to Applications: EAB Series with UL,EAB Series and cUL Certifications ATEX Boxes With With Boxes Covers Condulet 3F 56 • Aluminum–natural • • Standard Finishes: Body– • Standard Materials: NEC/CEC: • Compliances: Certifications and • EAJ conduitoutletboxeshave: Features: Actassealingfittings(withappropriate • Actasmountingoutletsforfixtures(with • Provideaccesstoconductorsfor • Changeconduitdirection • Interconnectlengthsofconduit • Actaspullandspliceboxes • • hazardous areasto: installed inconduitsystemswithin EAJ seriesconduitoutletboxesare Applications: • Weather-resistantfinish • Flatoverlappingthreadedcovers • Internallythreadedcoveropeningsfor • Smoothintegralhubbushingtoprotect • Taperthreadedhubstoprovideground • Sixdifferenthubarrangements • Nopinchingofconductorsduringcover • Cover–copper-freealuminum • Fourstandardmountingpads,exceptfor • CSAStandard:C22.2No.30 • ULStandard:1203 • Green groundscrewstandardinall conductors fromdamage External coverthreadsonbodyprotecting position locations whenmountedinupright Water sheddingcover–suitableforwet conduit Protect conductorsinthreadedrigid aluminum acrylicpaint Feraloy covers) appropriate covers) maintenance andfuturesystemchanges furnished withboxes additional wiringroom conductor insulationwhenpulling continuity installation EAJB andEAJD Class I,Division1&2,Groups Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G 3F Feraloy iron alloy–electrogalvanizedand www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright ® Boxes With Covers Boxes With iron alloy EAJ Series Condulet during pulling A‡,B,C,D boxes ® Conduit Outlet EAJC EAJD EAJT EAJL Coveropening–3 • EAJB Hub– • Suffix Size Ranges: Corro-free Covers – Bodies –copper-freealuminum Description Options: acrylic paint electrogalvanized andaluminum 1 / 2 Feraloy " to2" epoxy powdercoat 52 51 3 3 51 3 Dia. Opening Cover 3 3 3 Dia. Opening Cover 3 3 3 Dia. Opening Cover 3 3 3 Dia. Opening Cover 3 3 3 Dia. Opening Cover 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 / / / / / / / / / / / / / / / iron alloy– 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 EA3 ,7BD 9EFG 7ABCD, 4, NEMA 3, III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. D II, C, Cl. B, Groups A‡, 1&2, Div. I, Cl. 3 / 16 " to5"dia. © 3 1 1 ieCt # Cat. Size Hub 3 1 1 ieCt # Cat. Size Hub 3 1 1 ieCt # Cat. Size Hub 3 1 1 ieCt # Cat. Size Hub 1 3 1 ieCt # Cat. Size Hub / / / / / / / / / / 2013 Eaton’sCrouse-Hinds Business 4 2 4 2 4 2 1 1 4 2 4 2 / / 2 4 EAJT69†‡ EAJT59†‡ EAJT49†‡ EAJT26† EAJT16† EAJT36† EAJC26† EAJC16† EAJC36† EAJL26† EAJL16† EAJL36† EAJB36† EAJB26† EAJB16† EAJD26† EAJD16† EAJD36† WOD S752 SA† Dome Covers EAJ Threaded Covers EAJX suitable forGroupA. ‡Form 9productswith5"coveropeningarenot †Available incopper-freealuminum,addsuffix -SA. *EAJ0687 islistedforGroupC&Donly. In Inches: Dimensions Fixture Covers 5 oe pnn i.Ct # Cat. 3 Cover OpeningDia. Flat Covers a.#abcdef e 69 d 59 c 49 36 b 26 16 a # Cat. 3 / 16 5 5 5 3 3 3 3 3 3 3 3 3 / / / / / / 4 4 4 4 4 4 4 4 4 2 2 2 3 Dia. Opening Cover Union HubType 3 3 3 Dia. Opening Cover 1 1 1 25 25 17 3 Dia. Opening Cover / / / 3 16 16 16 / / / 3 3 3 / / / / 32 32 32 3 16 / 16 16 16 16 Wet Locations Raintight Dust-Ignitionproof Explosionproof 31 31 2 1 1 1 3 3 3 1 / / / / 16 4 4 2 3 ieCt # Cat. Size Stem Fixt. 7 7 3 1 2 Depth 3 1 1 ieCt # Cat. Size Hub. / / / / / / 4 8 8 4 1 1 3 4 2 / / / 2 2 32 7 7 7 5 5 5 EAJ06 EAJ09 EAJX26† EAJX16† EAJX36† EAJ0687* 13 13 5 9 9 5 / / / / EAJ0612 # Cat. 16 16 16 16 / / 16 16 4 4 4 3 3 3 3 3 3 3 3 3 / / / / / / 4 4 4 32 32 32 3F 57 3F NOR 000 001 151 222 NOR 000 000 115 314 NOR 000 000 115 302 NOR 000 000 115 311 NOR 000 111 150 009 NOR 000 000 115 306 NOR 000 000 115 315 NOR 000 001 151 206 NOR 000 001 151 214 NOR 000 111 150 001 NOR 000 111 150 002 NOR 000 111 150 003 NOR 000 111 150 004 NOR 000 111 150 005 NOR 000 111 150 006 NOR 000 001 151 181 NOR 000 001 151 199 2013 Eaton’s Crouse-Hinds Business © 2 2 Zone 1,Zone 2, 21 and 22 C31 Series " " " " " " " " 2 4 2 4 2 4 2 4 / / / / / / / / 1 3 1 3 1 3 1 3 C31 Series Ex II 2 G EEx d IIC T6 IIC G EEx d Ex II 2 85ºC T Ex II 2 D IP66 C30 Series C30C31C31C31C31C31C31 X T T T X X X 4 x 3 x 3 x 3 x 1" 4 x 4 x 4 x 1" C30C30 T X 3 x 4 x Ordering Information Ordering SeriesC30 Shape T Hub Size 3 x Cat. # † C30 support rail DIN 46877 C30 mounting plate without terminals C30 pending support C31 mounting plate with pillar terminals 4 x 4mm C31 mounting plate without terminals C31 support rail DIN 46877 Accessories DescriptionC30 Mounting plate with pillar terminals 4 x 4mm Cat. # C30 Series †Other entries available upon request. Dimensions In Inches: 2 2 IP67 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright up to 690V C30 Series: C31 Series: up to 6mm up to 10 mm Acc. terminals -50ºC to +55ºC Conduit Outlet Outlet Conduit ®

Ex d IIC T6 Ex tD A21 IP67 T85ºC EC-Type examination certificate LOM 02 ATEX 2037 X Compliant to EN60079-0 explosion where acetylene, hydrogen explosion where acetylene, are present and other hazardous gases conduit maintenance and future system changes continuity conductor insulation when pulling ground screw are both standard Technical Specifications Technical Operating temperature range Rated current Terminals Standard Materials: Standard • Bodies – Light alloy, natural finish • Covers – Light alloy, natural finish Degree of protection Rated voltage Certifications and Compliances: • IEC: • IP67 Applications: outlet boxes C30 and C31 series conduit systems within are installed in electrical hazardous areas to: • against exterior Provide protection • in threaded rigid Protect conductors • boxes Act as pull and splice • of conduit Interconnect lengths • Change conduit direction • conductors for Provide access to for IEC Applications for IEC C30 and C31 series conduit outlet boxes have: • Taper threaded hubs to provide ground • Smooth integral hub bushing to protect • Threaded cover openings • Surface covers furnished with boxes • Neoprene "o"-ring gasket and green • Cover threads are 16 pitch Features: Boxes With With Boxes Covers Condulet 3F 58 ecito Suffix Corro-free Description Options: Electrogalvanizedandaluminum • Standard Finishes: • Standard Materials: CSAStandardC22.2No.30 • ULStandard:1203 • NEC/CEC • Compliances: Certifications and Removablemountingfeetforflushor • Blindtappedholesforcoverscrewsto • Wide,accuratelymachinedbodyand • Twotypesofcover: • CPS conduitoutletboxeshave: Features: Provideaccesstoconductorsfor • Actasfixturehangerswithhubcovers • Interconnectlengthsofconduit • Changeconduitdirection • Actaspullandspliceboxes • Protectconductorsinthreadedrigid • areas to: installed inconduitsystemshazardous CPS seriesconduitoutletboxesare Applications: acrylic paint Feraloy surface mountingtowallorceiling further insureflametightness flametight joint cover matingsurfaces,toinsure maintenance andfuturesystemchanges conduit Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsC,D threaded hubformountinglightfixtures blank forspliceorpullboxuse 3F ® ™ iron alloy epoxy powdercoat www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Boxes With Covers Boxes With CPS Series Condulet ® S752 Conduit Outlet Box withHubCover Complete lineoffixturehangersarelocatedinsection7Lthiscatalog. In Inches: Dimensions Box withBlankCover u ieCt # Cat. 3 Hub Size # Cat. ‡Furnished withfour Cover 3 3 Body‡ Hub Size integrally bushedhubs.Threehubsareplugged. / / / 4 4 4 3 1 / / 4 2 3 / 4 " standardtapertapped, CPS12026 NEMA 7CD,9EFG III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. II, Cl. D GroupsC, 1&2, Div. I, Cl. CPS12022 CPS12021 © 2013 Eaton’sCrouse-Hinds Business Hub Covers* CPS Covers Form 20 ecito a.# Cat. Form 20 Description Blank Covers *Fixture weightupto125lbs. Form 20 Description Dust-Ignitionproof Explosionproof ieCt # Cat. Size Hub 3 1 / / 4 2 CPS022 CPS021 CPS026 3F 59 3F OET1 OET2 OET3 SA OELB1 OELB2 OELB3 SA OELR1 OELR2 OELR3 SA 2013 Eaton’s Crouse-Hinds Business 2 4 2 4 2 4 / / / / / / © 1 Hub Size1 3 Cat. # Hub Size1 3 Cat. # Hub Size1 3 Cat. # 1 1 OET OELB OELR Explosionproof Dust-Ignitionproof 8 4 OE Series / / 5 3 8 8 / / 7 7 16 16 / / 11 11 16 / 16 / 13 1 OEC1 OEC2 OEC3 SA 1 2 OELL1 OELL2 OELL3 SA 16 8 / / 9 7 1 1 16 16 / / 1 5 4 4 Cl. I, Div. 1 & 2, C, Groups D Cl. II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III NEMA 7CD, 9EFG 4 2 4 2 2 4 / / / / 1 1 3 Hub Size1 3 Cat. # Hub Size1 Cat. # / / 3 1 Dimensions In Inches: OEC Hub Size in. a b c d e f OELL S752 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright " fittings) 4 / 3 " and 2 / 1 Conduit Bodies Conduit ®

epoxy powder coat iron alloy ( " to 1" ™ 2 ® / 1

Class I, Division 1 & 2, Groups C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III Feraloy acrylic paint continuity conductor insulation when pulling tapped screw holes area outlet bodies rigid conduit future system changes • Copper-free aluminum (1" fittings) Options: DescriptionCorro-free Size Ranges: • Hub - Suffix Standard Materials: Standard • Finishes: Standard • Electrogalvanized and aluminum • NEC/CEC: • UL Standard: 1203 • CSA Standard: C22.2 No. 30 Certifications and Compliances: Features: have: OE conduit outlet bodies • Taper threaded hubs for ground • Smooth integral hub bushings to protect • Five different hub arrangements • Accurately machined body with blind • Most compact design of all hazardous OE series are installed in conduit systems OE series are installed in to: within hazardous areas • in threaded Protect conductors •splice fittings Act as pulling and • of conduit Interconnect lengths • of conduit Change direction • maintenance and Provide access for Applications: OE Series With Covers Condulet 3F 60 Taperthreadedhubsandintegral • Extralongcoveropeningtofacilitate • Accuratelymachinedbodyandcover • EKC bodieshave: Features: Standard Finishes: EKCbodies– • Standard Materials: CSAStandard:C22.2No.30 • ULStandard:1203 • NEC: • Compliances: Certifications and Provideconvenientopeninginconduit • in conduitsystemswithinhazardousareasto: EKC seriesconduitoutletbodiesareinstalled ecito Suffix EKCbodies–hubsize1"to3" • Size Ranges: Corro-free EKC series: Description Options: • Applications: bushing forrigidthreadedconduit pulling andsplicingofconductors joint whenproperlyassembled mating surfacestoensureflametight system forpullingorsplicingconductors aluminum acrylicpaint Feraloy Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupD EKC 70,80 Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsC,D EKC 30–60 3F – electrogalvanizedand ™ epoxy powdercoat www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Feraloy With Covers EKC Series Condulet iron alloy ® S752 Conduit Bodies ieabcdef e d c b a 2 1 1 – Size EKC In Inches: Dimensions Ordering Information u ieCt # Cat. Hub Size 3 2 2 1 1 1 1 1 / / 1 1 1 / / / 2 2 2 2 4 – 3 – 2 1 / 4 EKC 21 15 12 3 15 5 NEMA 7CD,9EFG III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. II, Cl. D GroupsC, 1&2, Div. I, Cl. / / 4 8 / © 16 2013 Eaton’sCrouse-Hinds Business EKC80 EKC70 EKC60 EKC50 EKC40 EKC30 5 3 3 1 7 1 / / / 2 8 16 EKC 63 4 3 5 7 / / 16 16 Dust-Ignitionproof Explosionproof 2 1 3 1 3 / / / 4 2 4 66 5 16 12 94 5 / 8 3F 61 SA 2 2 4 / / / 1 1 3 S752 1 1 1 ET218 ET228 ET328 " 2 3F LBY15 LBY25 LBY35 LBY45 LBY55 / 1 4 2 2 LBH10 LBH20 LBH30 LBH40 LBH50 LBH60 LBH70 LBH80 LBH90 LBH100 / / / ™ 1 1 1 1 ‡ ‡ ‡ 2 4 4 / / 1 3 / 3 8 " to 1 " to 4" – – / 2 – 2 2 4 5 / 4 / / / 1 1 1 3 / 3 4 2 2 4 2 2 – – / / / / / / ET 4 4 1 1 2 4 1 1 1 1 2 4 / / / / / / Hub Size3 Cat. # 3 1– ‡Largest hub is shown at top of photo. Hub Size Cat. # 1 3 1 1 1 3 4 Hub Size Cat. # 1 3 1 1 1 2 2 3 Corro-free 42 43 1 43 1 4 2 / 4 / 3 / 1 3 – – 4 – 2 / 4 / 1 3 / 3 – – 4 4 / / 3 ET Size3 a1– b c d Explosionproof Dust-Ignitionproof 16 / 8 4 2 / / / 2013 Eaton’s Crouse-Hinds Business 1 1 15 3 3 2 2 2 2 © LBH and LBY series – LBY ET Options: DescriptionLBH and LBY series – copper-free aluminum epoxy powder coat Size Ranges: •size LBH bodies – hub Suffix Information Ordering LBH •size LBY elbows – hub 4 8 8 / / / 3 5 1 5 16 / 4 16 32 4 / / / / LBY 9 13 3 3 1 4 / 3 4 2 2 3 3 42 74 1010 5 5 16 4 2 2 / / / / 3 3 1 1 1 2 2 315 4247 4 2 / / 1 1 2 4 iron alloy / / LBY Size1 3 a1 1 1 b 4 ® / 3 4 32 32 2 / / / / 1 3 3 1 41 5 7 7 9 11 32 32 32 16 Feraloy / / / / 2 2 / / 19 13 1 25 1 11 2 3 4 4 5 6 16 32 / / 8 16 / / 15 21 5 9 16 8 / / 1 7 LBH 5 7 10 10 15 23 Cl. I, Div. 1 & 2,A, Groups B,Cl. C, II, D* Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III NEMA 7ABCD,9EFG 4 –3 –4 4 LBH 10-20 – Groups B, C, D Class I, Division 1 & 2, E, F, G Class II, Division 1, Groups F, G Class II, Division 2, Groups Class III LBH 30-100 Group D Class I, Division 1 & 2, E, F, G Class II, Division 1, Groups F, G Class II, Division 2, Groups Class III LBY – Class I, Division 1 & 2, Groups C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III ET – Class I, Division 1 & 2, Groups A, B, C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III / 2 2 / 3 / / aluminum acrylic paint 2 1 1 1 – / 1 2 / *See Compliances for classification of each product. LBH Size1 1– a1 2 2- b3- c d e f Standard Finishes: Standard • LBH, LBY and ET – electrogalvanized and Dimensions In Inches: • LBH, LBY and ET – Standard Materials: Standard Certifications and Compliances: • NEC: • UL Standard: 1203 • CSA Standard: C22.2 No. 30 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Conduit Bodies Conduit ® conductors to be pulled straight through hubs from either direction bends (relieves strain on insulation) bushings compact overall size removal conductors to be pulled straight through either hub for rigid threaded conduit use in concealed, or open conduit systems. or partitions for rigid threaded conduit conductors that are stiff due to large size conductors that are stiff or type of insulation either direction allowing straight pull in buildings and future system changes space is limited maintenance and future system changes device boxes located above or below main conduit runs. Eliminates separate feed and return conduits Applications: Features: LBH bodies have: • Cover openings on an angle, permitting • Domed covers to permit easy conductor • Taper threaded hubs with integral LBY elbows have: • Maximum volume for bends within a • Screw on cover for ease of installation and • Over opening on an angle, permitting • Taper threaded hubs and integral bushing ET short radius tees have: • Compact size and small radius of bend for • Particularly suited for use in shallow floors • Taper threaded hubs and integral bushing LBH conduit outlet bodies are installed in LBH conduit outlet bodies hazardous areas to: • especially for Act as pull outlets • conduit system, Make 90° bends in • service entrance to Provide for conduit • entrance to motors Provide for conductor •wiring for maintenance Provide access to LBY elbows are installed in conduit systems within hazardous areas to: • Make 90° bends in conduit systems where • Act as pull outlets • Provide access to conductors for ET series short radius tees are installed in conduit systems within hazardous areas to: • Allow single conduit stub up to outlet and Condulet LBH, LBY, ET Series With Covers; Elbows and Tees and Elbows With Covers; 3F 62 Provideaccesstowiringfor • Make90ºbendsinconduitsystems, • Actasdraw-inoutletsespeciallyfor • hazardous areasto: FE andFTconduitfittingsareinstalledin Applications: Ex1108U • Approvals IIB • Gas Group IP67 • Degree ofProtection Exd,DIPA21,IP67 • Type ofProtection Compliances: Certifications and Largeopeningstofacilitatecablepulling • Maximumvolumeforbendswithina • Features: ecito Suffix NPT &BSPthreadsizes Description Options: Natural • Standard Finishes: Cover–Brass • Body–Copper-freealuminum • Standard Materials: maintenance andfuturesystemchanges direction allowing forastraightpullineither type ofinsulation cables thatarestiffduetolargesizeor compact overallsize 3F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright IEC Certifications FE andFTSeries Condulet Consult Factory ® Elbows and Tees Dimensions (mm) FE1 FT2 FT1 FE2 a.#Tp EntrySize(metric) Type Cat. # Inspection ElbowsandTees Selection Ordering Information: e M25(F)-M25(F) M20(F)-M20(F) M25(F)-M25(F) M20(F)-M20(F) Tee Tee Elbow Elbow © oe2Zone22 Zone21 Zone 2 Zone 1 2013 Eaton’sCrouse-Hinds Business 3F 63 3F 3F 2013 Eaton’s Crouse-Hinds Business HTL4 © Net Wt.4 oz. (tube) Cat. # Certifications and Compliances: Certifications and • 2008, Article 300.6 Complies with NEC MSDS Sheets are available at www.crouse-hinds.com HTL High Temperature Thread Lubricant Thread HTL High Temperature www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright STL2 STL8

oz. (tube) 4 / tapped opening, on any rotating shaft – threaded or plain, and to tapped opening, on any metal-to-metal joint of apparatus and inhibit corrosion on any control enclosures. joints of the enclosures of any heat- joints and on threaded control. producing apparatus or current-carrying parts joints maintains raintightness and inhibits corrosion current-carrying parts 3 8 oz. (can) Net Wt.1 Cat. # STL Thread Lubricant STL Thread Applications: • is used between any screw thread and its STL thread lubricant • lubricant is used on lighting fixture threaded HTL high temperature Features: lithium based, antigalling and: STL thread lubricant is • of dissimilar metals Is especially effective between parts made • Is effective and stable from –20°F to +300°F • be used on exposed Maintains grounding continuity; should not • application on threaded Has excellent adhesion qualities; a liberal thread lubricant: HTL is a high temperature, anti-seize, conductive • Effective and stable from –70°F to +1800°F • Prevents seizure, galling, rust, galvanic action • be used on exposed Maintains grounding continuity; should not • metals Effective between parts made of dissimilar Lubricants 3F 3F 64 3F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright © 2013 Eaton’sCrouse-Hinds Business 4F 65 4F Page No. see page 96 see page 100 see page 101 see page 102 see page 103 see page 104 see page 105 see pages 106–107 see pages 112–113 see pages 114–115 2013 Eaton’s Crouse-Hinds Business © ® A Series B Series D Series E Series Breathers and Drains LCC, LCCF Series TGC Series TW Series Environmental Seal Fire Seal Link Seal – For Conduit Conduit Barrier Thru-Wall Grounding Conductor Grounding Cable Glands - Accessories Cable Tray Clamps Cable Tray Cable/Conduit Sealing Devices Description Page No. see page 83 see page 84 see page 85 see page 86 see page 86 see page 87 see page 88 see page 91 see page 92 see page 93 see page 94 see page 95 see page 95 see page 71 see page 72 see page 73 see page 74 see page 75 see page 76 see page 77 see page 78 see page 79 see page 80 see page 66 see pages 67–70 see pages 67–70 see pages 89–90 see pages 81–82 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

CGFP NCG NCGB TMC TECK CGB CGD CGE CGB1013 Terminator™ II TMCX TMCX ADE 6FC ADE 1FC CGBS EBY Enlargement and Multiple ADE 4I ADE 4F ADE 6F ADE 6FC ADE 1FC Ex - e Ex - i Trumpet ADE 1F Explosionproof Quick Selection Guide Flameproof and Increased Safety and Increased Flameproof Quick Selection Guide General Purpose Industrial Cable Glands - North American Standards Description Application Cable Glands - International Standards

Hazardous and Non-hazardous Hazardous Cable Glands and Cable Accessories Cable and Glands Cable 4F 66 TW SeriesTHRU-WALLBARRIER Provideameanstofirmlybondexitingconduitcabletrayfor • Provideameansofclampingmetalconduit(rigidsteelor • flanges. LCC/LCCFseriescabletrayconduitclampsareinstalledto: outside flanges;LCCFclampsareforuseexclusivelyoninside side railswithinsideflanges(requiringtraymounting)and LCC cabletrayconduitclampsareusedforinstallationon with interlockedorcorrugatedarmorandTypeTCtraycable(TMCX). for usewithTypeMCjacketedsteeloraluminummetalcladcables TMC (non-hazardous)andTMCX(hazardous)fittingsaredesigned Providegroundcontinuityofcablearmorandflexibleconduit • Formamechanicalgripandwaterand/oroil-resistanttermination • Providemeansforpassingarmored,metalclad,jacketedor • Cable glandswithsealingfittingorepoxyareinstalledto: Providegroundingcontinuityforcablearmorandflexibleconduit • Formanon-slipconnectionorterminationforflexiblecord,cable • Formamechanicalgripandwaterand/oroil-resistantsealforcord • Providemeansforpassingacord,cable(armoredorunarmored) • Cable glandsandcordfittings: Applications: flanges. installed onmosttypesofcabletrays–withinsideoroutside ground faultcurrentforequipmentprotection.TGCclampmaybe grounding conductorclampsprovideareliablemethodforcarrying grounding continuityfortheentiretraysystem.TGCcable securely attachingagroundingconductortocabletrayprovide TGC cabletraygroundingconductorclampprovidesameansfor Provideasealforcable/conduitpenetrationsthroughsteel, • Restrictentranceofwateranddustcontaintreatedair • Sealcablesorconduitspenetratingfireratedwalls,ceilings, • installed to: best groundingcontinuity control cablesfromtray aluminum, IMCandEMT)tocabletrayfortheexitofpowerand/or fitting* compound orTSCepoxy(TMCX)isusedtomakethesealin Class I,GroupsC,DlocationsonlywhenChico enclosure inhazardousareas.Thesefittingsaresuitableforuse unjacketed andunarmoredcablesthroughabulkheador (armored orunarmored),flexibleconduit and unarmoredorjacketedarmored,roundcables rigid conduit or flexibleconduitintoanenclosure,throughabulkhead through cable/conduitpenetrationsintocleanareas masonry orconcrete;torestricttheentranceofcontaminants floors 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Application andSelection Cable Glandsand Accessories ® cable/conduit sealingdevicesare ® A sealing TomeetNationalElectricalCoderequirementsforelectrical • Compressionofataperedneoprenebushingassuresthe • Compressionofbushingprovidesastrongelectricalbondthat • Apropermatchingofthecableanditsglandisnecessaryto • Selectionofthepropercableglandinvolvesconsideration • Considerations forSelection: *With specificcordsandcableswheninstalledinaccordancewithNEC/CECrequirements. © required inconjunctionwiththecableorcordfitting. installations inhazardousatmospheres,asealingfittingmaybe pouring compound. body, canbeobtainedbyuseofapottingheadfilledwithhot Additional watertightness,topreventwaterseepageintothefitting watertight integrityofEaton'sCrouse-Hindscableglands. assures groundingcontinuity. damage tothecablesheath. strength foradequatecablesupportandstrainreliefwithout split leadortaperedneoprenebushingstoprovidehighgripping Crouse-Hinds cableglandsandcordfittingsutilizecompressionof which mayleadtodamageofthecableoutercovering.Eaton's of cableglandsdependongrippingmethods(setscrews,etc.) prevent physicaldamagetothecablewheninstalled.Sometypes the cableafterinstallation. type ofcabletobeinstalledandtheenvironmentthatwillsurround 2013 Eaton’sCrouse-Hinds Business 4F 67 4F Flameproof & Increased Safety Flameproof & Increased Safety Flameproof & Increased Safety Flameproof & Increased Safety Flameproof & Increased Safety PROTECTION TYPE 2013 Eaton’s Crouse-Hinds Business © Nickel-plated brass Nickel-plated brass STANDARD MATERIAL CERTIFICATION Armoured brass Nickel-plated Armoured barrier Non-armoured barrier Non-armoured Nickel-plated brass Armoured Nickel-plated brass GLAND TYPE Non-armoured, armoured and tray cable (does not terminate the armour) SWA, SWB, STA and braided marine shipboard SWA, SWB, STA, braided marine shipboard and lead sheathed (with addition of earthing washer) Non-armoured, armoured and tray cable (does not terminate the armour) SWA, SWB, STA, braided marine shipboard and lead sheathed (with addition of earthing washer) CABLE TYPE www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright ADE 1F (see page 71) ADE 1FC (see page 75) ADE 4F (see page 72) ADE 6F (see page 73) ADE 6FC (see page 74) CABLE GLAND ILLUSTRATION Global Cable Glands Cable Global Quick Selection Guide - International Standards Guide - International Quick Selection 4F 68 ae80) page (see ADE 4I 79) page (see and Multiple Enlargement 78) page (see Trumpet 77) page (see Ex -i ILLUSTRATION GLAND CABLE ae76) page (see Ex -e 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Quick SelectionGuide-InternationalStandards Global CableGlands TYPE CABLE washer) of earthing (with addition sheathed and lead shipboard marine STA, braided SWA, SWB, armoured Non- armoured Non- armoured Non- armoured Non- TYPE GLAND rordNickel-platedbrass Armoured Polyamide Non-armoured Polyamide Non-armoured Polyamide Non-armoured Polyamide Non-armoured © 2013 Eaton’sCrouse-Hinds Business AEILCERTIFICATION MATERIAL STANDARD TYPE PROTECTION Increased Safety Increased Safety Increased Safety Industrial Increased Safety 4F 69 4F Explosionproof Flameproof & Increased Safety Explosionproof Explosionproof General Purpose General Purpose General Purpose Explosionproof Flameproof & Increased Safety PROTECTION TYPE 2013 Eaton’s Crouse-Hinds Business © STANDARD MATERIAL CERTIFICATION Body steel Form A-D steel Form E-F iron Nickel-plated brass Nickel-plated brass Body: steel Gland nut: aluminum Aluminum Aluminum Aluminum Aluminum Armoured barrier, non- armoured barrier, and TECK armoured GLAND TYPE Non-armoured Non-armoured barrier Armoured barrier Portable cord connector Portable cord connector Armoured or non-armoured Armoured barrier and non-armoured barrier

Metal-clad, TECK (interlocked and continuously welded corrugated armoured), unarmoured, and tray cable

CABLE TYPE Non-armoured and tray cable Non-armoured Metal-clad with interlocked or continuously welded corrugated, TECK armoured, non-armoured and tray cable TECK armoured Armoured Aluminum Non-armoured, armoured and tray cable (does not terminate the armour) SWA, SWB, STA, braided marine shipboard and lead sheathed (with addition of earthing washer) Non-armoured and tray cable Metal-clad with interlocked or continuously welded corrugated, TECK armoured, non-armoured and tray cable

D B www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright F

A C Terminator™ II TMCX X (see pages 81–82) TMCX (see page 83) CGBS (see page 86) EBY (see page 86) TMC (see page 87) TECK (see page 88) CGB (see pages 89–90) CABLE GLAND ILLUSTRATION ADE 1FC (see page 85) ADE 6FC (see page 84) Global Cable Glands Cable Global Quick Selection Guide - North American Standards Guide - North Quick Selection 4F 70 ae95) page (see NCG ae95) page (see NCGB 94) page (see CGFP 93) page (see CGB1013 91) page (see CGD ILLUSTRATION GLAND CABLE ae92) page (see CGE 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Quick SelectionGuide-North American Standards Global CableGlands NCGB TYPE CABLE and traycable Non-armoured and traycable Non-armoured and traycable Non-armoured and traycable Non-armoured and traycable Non-armoured and traycable Non-armoured TYPE GLAND Non-armoured Polyamide Non-armoured Non-armoured connector Portable cord Non-armoured Non-armoured © 2013 Eaton’sCrouse-Hinds Business AEILCERTIFICATION MATERIAL STANDARD polyester Thermoplastic Form D-G:iron Form B-C:steel aluminum Gland nut: Body: steel Gland nut:steel Body: iron Gland nut:steel Body: iron TYPE PROTECTION General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose ADE 1F ATEX CEPEL 4F IECEx GOST-R International Standards - cULus Listed for Class I, Zone 2 NEPSI Flameproof and Increased Safety cULus Marine Listed for Class I, Zone 2 NEMA 4X and IP68

Gland Type: 4F Non-armoured

Cable Type: Non-armoured, armoured and tray cable (does not terminate the armour)

Certifications and Compliances:

• ATEX LCIE 97 ATEX 6008X – Exd IIC/Exe II/Ex tD /Ex II 2 GD • IECEx LCI 05.0004X Features: • cULus Listed for Class I Zone 2 AEx e II/Ex e II E310130 • Standard material is nickel-plated brass for superior corrosion • cULus Marine Listed for Class I Zone 2 AEx e II/Ex e II E314047 resistance • NEMA 4X and IP68 • Provides a flameproof and weatherproof seal on the outer sheath of the cable • CEPEL cepel-EX-558/05X • Standard neoprene seal suitable for use in operating temperatures • GOST-R POCC FR.B02011 ATEX (-60°C to 100°C), IECEx and cULus (-40°C to 100°C) • NEPSI N° GYJ071336U & GYJ071337U • Available with optional silicone seal for extreme temperatures • Available with metric or NPT threads • See pages 96–103 for related accessories

ORDERING EXAMPLE: OPTIONS (replace last digit with option number): 9 Stainless steel (316L) 8 Bronze CAP81640 4KX 7 Aluminum 5 Silicone sealing ring with temperature range of -70°C to 220°C K1 Includes locknut and ﬁber washer K2 Includes locknut, ﬁber washer, earth tag, and GlandType Options shroud SELECTION TABLE Entry Thread Size ‘A’ Thread Cable Acceptance Hexagon Dimensions Length ‘B’ Outer Sheath‘E’ Gland Gland Metric Metric NPT NPT Metric Length ‘F’ Across Across Size Size Catalog # Size Catalog # (NPT) Min Max (less entry) Flats Corners ‘G’ 1 4 M12 CAP816404 /4" CAP818404 15 (12.0) 4.0 8.0 20 – 16.5 3 4 M16 CAP816594 /8" CAP818594 15 (12.0) 4.0 8.5 20 – 20.9 1 5 M16 CAP816504 /2" CAP818694 15 (12.0) 6.0 12.0 22 – 20.9 1 4 M20 CAP816674 /2" CAP818674 15 (20.2) 4.0 8.5 20 – 26.4 1 5 M20 CAP816694 /2" CAP818694 15 (20.2) 6.0 12.0 22 – 26.4 1 6 M20 CAP816604 /2" CAP818604 15 (20.2) 8.5 16.0 25 – 26.4 3 5 M25 CAP816774 /4" CAP818774 15 (20.2) 6.0 12.0 22 – 33 3 6 M25 CAP816794 /4" CAP818794 15 (20.2) 8.5 16.0 25 – 33 3 7 M25 CAP816704 /4" CAP818704 15 (20.2) 12.0 21.0 27 – 33 7 M32 CAP816894 1" CAP818894 15 (25.3) 12.0 21.0 27 – 39.6 8 M32 CAP816804 1" CAP818804 15 (25.3) 16.0 27.5 34 – 45.1 1 8 M40 CAP816994 1 /4" CAP818994 15 (26.0) 16.0 27.5 34 – 48.4 1 9 M40 CAP816904 1 /4" CAP818904 15 (26.0) 21.0 34.0 36 – 52.8 1 9 M50 CAP817094 1 /2" CAP819094 15 (26.5) 21.0 34.0 36 – 60.5 1 10 M50 CAP817004 1 /2" CAP819004 15 (26.5) 27.0 41.0 39 – 60.5 11 M63 CAP817294 2" CAP819294 17 (27.2) 33.0 48.0 41 – 73.7 12 M63 CAP817204 2" CAP819204 17 (27.2) 40.0 56.0 43 – 79.2 1 12 M75 CAP817394 2 /2" CAP819494 18 (40.5) 40.0 56.0 43 – 88 1 13 M75 CAP817304 2 /2" CAP819404 18 (40.5) 47.0 65.0 49 – 93.5 14 M90 CAP817594 3" CAP819594 22 (42.0) 54.0 74.0 56 – 104.5 15 M90 CAP817504 3" CAP819504 22 (42.0) 63.0 78.0 61 – 121 1 16 M110 CAP817794 3 /2" CAP819604 22 (43.2) 72.0 92.0 62– 132

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 71 4F 72 washer) marine shipboardandleadsheathed(withadditionofearthing Steel wirearmoured,steelbraided,tapebraided Cable Type: Armoured Gland Type: NEPSIN°GYJ071336U&GYJ071337U • GOST-RPOCCFR.B02011 • CEPELcepel-EX-559/05X • NEMA4XandIP68 • cULusMarinelistedforClassI,Zone1AExeII/ExIIE314047 • cULuslistedforClassI,Zone2AExeII/ExIIE310130 • IECExLCI05.0004X • ATEXLCIE976008X–ExdIIC/ExeII/ExtD/ExII2GD • Certifications andCompliances: Gland All dimensionsinmillimetersunlessotherwise noted *CAP849604“outersheath”min:85max:107. SELECTION TABLE Size 7M110 17 M90 15 M63 M50 12 M50 11 M40 10 10 6M90 16 M63 13 6M90 16 M75 13 4M75 14 M16 5 M12 5 M40 M32 M32 9 M25 9 M25 8 M25 8 M20 7 M20 6 M20 7 M16 6 5 6 4F Metric Size www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright CAP846594 CAP846404 CAP846994 CAP846804 CAP846894 CAP846704 CAP846794 CAP846774 CAP846604 CAP846694 CAP846674 CAP846504 CAP847794 CAP847794 CAP847294 CAP847004 CAP847094 CAP846904 CAP847504 CAP847204 Catalog # Metric CAP847574 CAP847394 CAP847304 ADE 4F Flameproof andIncreasedSafety International Standards- Entry Thread Size‘A’ NPT ieNPTCatalog# Size 2 1 1 1 1 3 2 3 3 3 1 1 1 3 3 1 1" 1" 4" 3" 2" 3" 2" / / / / / / / / / 1 1 1 1 1 1 1 4 4 4 2 2 2 8 8 4 / / / / / / / 2 " " " " " " 2 2 2 2 4 4 " " " " " " " " " " CAP849604 CAP849404 CAP849004 CAP849094 CAP848904 CAP848994 CAP848604 CAP848694 CAP848674 CAP848504 CAP848594 CAP848404 CAP848704 CAP848794 CAP848774 CAP848804 CAP848894 CAP849704 CAP849594 CAP849294 CAP849504 CAP849204 CAP849494 Length ‘B’ / 4.)6. 207.*9.*31 0 132.0 – 108 3.15 93.0* 72.0* 82.0 63.0 N/A (43.2) 8(05 706. 407. . 2–104.5 – 70.4 60.5 92 60.5 – 52.8 – 2.5 – 74 – 74.0 68 68 54.0 2.5 63 65.0 2.0 2.0 48.0 47.0 1.6 41.0 33.0 18 (40.5) 41.0 27.0 41.0 34.0 27.0 34.0 27.0 21.0 34.0 21.0 15 (26.5) 27.5 21.0 15 (26.5) 16.0 15 (26.0) 15 (26.0) 5(02 202. 602. . 6–45.1 33.0 33.0 – 33.0 26.4 26.4 – – 26.4 56 20.9 – – – 46 42 1.6 – – 46 1.25 42 36 1.25 27.5 21.0 1.25 42 36 16.0 1.25 16.0 0.9 12.0 21.0 8.5 20.5 16.0 1.25 16.0 0.9 12.0 12.0 12.0 12.0 8.5 8.5 16.0 6.0 16.0 15 (20.2) 12.0 6.0 12.0 15 (20.2) 8.5 8.5 8.5 6.0 15 (20.2) 6.0 12.0 15 (20.2) 4.0 8.5 15 (20.2) 6.0 15 (20.2) 4.0 15 (12.0) 15 (12.0) 15 (12.0) 5(53 602. 103. . 3–52.8 45.1 – – 63 56 1.6 1.6 34.0 27.5 21.0 16.0 27.5 21.0 16.0 12.0 15 (25.3) 15 (25.3) 2(45 209. 5017031 1 148.5 121.0 – – 115 79.2 3.15 104 – 107.0 3.15 85.0 77 92.0 83.0 72.0 63.0 2.5 22 (44.5) 74.0 48.0 54.0 33.0 22 (42.0) 41.0 27.0 17 (27.2) 2(20 308. 209. .518–132.0 – 93.5 108 – 3.15 85 93.0 72.0 2.5 82.0 56.0 63.0 47.0 22 (42.0) 48.0 33.0 17 (27.2) 8(05 005. 706. . 5–93.5 – 85 2.5 65.0 47.0 56.0 40.0 18 (40.5) Thread Metric (NPT) Inner Sheath i a i Max Min Max Min . . . 12.0 6.0 8.0 4.0 Zone 1 cULus MarineListedforClassI, Zone2 cULus ListedforClassI, IECEx ATEX e ae 96–103forrelatedaccessories Seepages • AvailablewithmetricorNPTthreads • Availablewithoptionalsiliconesealforextremetemperatures • Standardneoprenesealsuitableforuseinoperatingtemperatures • Optionalearthingwasherforusewithleadsheathedcable • Providesflameproofsealoninnerjacketandweatherproof • Armourclampingandbondingwithnoreversiblecomponentsfor • Standardmaterialisnickel-platedbrassforsuperiorcorrosion • Features: ‘D’ Cable Acceptance © ATEX (-60°Cto100°C),IECExandcULus(-40°C100°C) 97) (see page outer sheathofcable easy installation,minimizingerror resistance 2013 Eaton’sCrouse-Hinds Business GlandType ORDERING EXAMPLE: CAP84640 Outer Sheath ‘E’ 4KX Options Armour (max) . 6–20.9 – 36 0.9 2Includes locknut,ﬁber washer, earth tag, and K2 Includes locknutandﬁberwasher K1 Silicone sealingringwithtemperaturerangeof 5 7 Aluminum Bronze 8 Stainless steel(316L) 9 OPTIONS -70°C to220°C shroud ‘F’ (less Length Gland entry) NEMA 4XandIP68 NEPSI GOST-R CEPEL rpaels ii ihoto number): option with digit last (replace Across Flats Dimensions Hexagon Corners Across ‘G’ ADE 6F ATEX CEPEL 4F IECEx GOST-R International Standards - cULus Listed for Class I, Zone 2 NEPSI Flameproof and Increased Safety cULus Marine Listed for Class I, NEMA 4X and IP68 Zone 2

Gland Type: 4F Armoured Cable Type: Steel wire armoured, steel wire braided, steel tape armoured and braided marine shipboard Certifications and Compliances: • ATEX LCIE 97 6008X - Exd IIC / Exe II / Ex tD / Ex II 2GD Features: • IECEx LCI 05.0004X • Standard material is nickel-plated brass for superior corrosion • cULus Listed for Class I, Zone 2 AEx e II / Ex e II E310130 resistance • cULus Marine Listed for Class I, Zone 2 AEx e II / Ex e II E314047 • Armour clamping and bonding with no reversible components for easy installation, minimizing error • NEMA 4X and IP68 • Provides fully inspectable inner seal after installation • CEPEL • Flameproof diaphragm seal on inner jacket does not damage • GOST-R cables exhibiting “cold-flow”; weatherproof seal on outer sheath of cable • NEPSI • Deluge boot provides enhanced protection from water ingress • Standard neoprene seal suitable for use in operating temperatures ATEX (-60°C to 100°C), IECEx and cULus (-40°C to 100°C) • Available with metric or NPT threads • See pages 96–103 for related accessories

SELECTION TABLE Entry Thread Size ‘A’ Cable Acceptance Hexagon Thread Inner Outer Gland Dimensions Length ‘B’ Sheath ‘D’ Sheath ‘E’ Length Across Gland Metric Metric NPT NPT Metric Armour ‘F’ (less Across Corners Size Size Catalog # Size Catalog # (NPT) Min Max Min Max (max) entry) Flats ‘G’ 3 5 M16 CAP965594 /8" CAP967594 15 (12.0) 3.0 7.5 6.0 12.0 0.9 46.0 – 20.9 1 5 M20 CAP965674 /2" CAP967674 15 (20.2) 3.0 7.5 6.0 12.0 0.9 46.0 – 26.4 1 6 M20 CAP965694 /2" CAP967694 15 (20.2) 6.5 11.0 8.5 16.0 1.25 53.0 – 26.4 1 7 M20 CAP965604 /2" CAP967604 15 (20.2) 9.0 14.5 12.0 21.0 1.25 59.0 – 33.0 3 7 M25 CAP965794 /4" CAP967794 15 (20.2) 9.0 14.5 12.0 21.0 1.25 59.0 – 33.0 3 8 M25 CAP965704 /4" CAP967704 15 (20.2) 12.0 19.5 16.0 27.5 1.6 74.5 – 45.1 8 M32 CAP965894 1" CAP967894 15 (25.3) 12.0 19.5 16.0 27.5 1.6 74.5 – 45.1 9 M32 CAP965804 1" CAP967804 15 (25.3) 17.5 26.0 21.0 34.0 1.6 83.5 – 52.8 1 9 M40 CAP965994 1 /4" CAP967994 15 (26.0) 17.5 26.0 21.0 34.0 1.6 83.5 – 52.8 1 10 M40 CAP965904 1 /4" CAP967904 15 (26.0) 23.0 33.0 27.0 41.0 2.0 92.0 – 60.5 1 10 M50 CAP9660941 /2" CAP968094 16 (26.5) 23.0 33.0 27.0 41.0 2.0 92.0 – 60.5 11 M50 CAP966004 2" CAP968294 16 (27.2) 28.5 41.0 33.0 48.0 2.5 104.0 – 70.4

Larger sizes available in ADE 4F design, see page 72. All dimensions in millimeters unless otherwise noted.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 73 4F Gland Type: 74 Armoured barrier earthing washer) braided marineshipboardandleadsheathed(withadditionof Steel wirearmoured,steelbraided,tape Cable Type: Lloyds • DNVN°E-10892 • ABSapprobation: • NEPSIN°GYJ071336U&GYJ071337U • GOST-RPOCCFRBo2011 • CEPEL-EX-558/05X • NEMA4XandIP68 • cULusMarineListedforClassI,Division1,GroupsA,B,C,D • cULusListedforClassI,Zone2AExdeII/ExII • IECExLCI05.0004X • ATEXLCIE976008X-ExdIIC/ExeII/ExtD/ExII2GD • Certifications andCompliances: **Contact CustomerService oryourfieldsalesrepresentativeforamended ULmarinerange. *Aluminum notcurrentlyavailablewithULmarine certification. All dimensionsinmillimetersunlessotherwise noted. Gland SELECTION TABLE Size n° 10-HS577243-PDA/P1836754-X 3M75 13 6– 16 3M63 13 5– 15 7M110 17 M90 16 4– M75 14 14 M63 M50 12 M50 11 M40 10 10 5M90 15 4F M40 9 M32 9 M32 M25 8 M25 8 M20 7 M20 7 6 M20 5 M16 5 Metric Size www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Flameproof andIncreasedSafety International Standards- ADE 6FC CAP969994 CAP970394 CAP970204 CAP969804 CAP970794 CAP970504 CAP970304 CAP970294 CAP970004 CAP970094 CAP969904 CAP969894 CAP969704 CAP969794 CAP969604 CAP969694 CAP970594 CAP969674 CAP969594 Catalog # Entry Thread Size‘A’ Metric – – – NPT Size 1 2 3 2 1 1 1 3 3 3 1 1 1 3 1" 2" 4" 3" 2" 3" 1" 3" / / / / / / 1 1 1 1 1 1 1 1 4 4 2 2 2 8 / / / / / / / / 4 " " " " " " 2 2 2 2 2 2 4 " " " " " " " " CAP972204 CAP971804 CAP972704 CAP972504 CAP972274 CAP971894 CAP972594 CAP971994 CAP972604 CAP972694 CAP972404 CAP972494 CAP972004 CAP972094 CAP971904 CAP971704 CAP971794 CAP971604 CAP971694 CAP971674 CAP974594 CAP972574 Catalog # NPT 7(92 005. 0. 606. . 1. 93.5 – 118.0 2.5 65.0 46.0 100.0 56.0 50.0 17 (29.2) 5(53 302. 202. 40168. 52.8 – 83.5 1.6 34.0 21.0 42.0 28.0 23.0 15 (25.3) 2(65 509.* 0. 5017031 4. 148.5 132.0 – – 142.0 137.0 3.15 107.0 3.15 85.0 200.0 93.0 92.0** 72.0 140.0 85.0 22 (46.5) 82.0 75.0 22 (44.0) 7(92 304. 0. 005. . 0. 79.2 – 108.0 2.5 56.0 40.0 100.0 48.0 43.0 17 (29.2) 5(53 701. 101. 75167. 45.1 – 74.5 1.6 27.5 16.0 21.0 19.5 17.0 15 (25.3) 2(40 607. 4. 308. .5130–121.0 – 133.0 3.15 83.0 63.0 140.0 73.0 66.0 22 (44.0) 5(60 302. 202. 40168. 52.8 – 83.5 1.6 34.0 21.0 42.0 28.0 23.0 15 (26.0) 8(25 906. 2. 407. . 2. 104.5 93.5 – – 70.4 124.0 60.5 118.0 2.5 60.5 – – 2.5 74.0 – 104.0 54.0 65.0 120.0 92.0 46.0 2.5 65.0 100.0 92.0 2.0 56.0 59.0 48.0 2.0 18 (42.5) 33.0 50.0 41.0 18 (42.5) 80.0 27.0 41.0 60.0 27.0 41.0 60.0 33.0 36.5 16 (27.2) 33.0 29.0 16 (26.5) 29.0 15 (26.0) 5(05 701. 101. 75167. 45.1 33.0 – 26.4 33.0 26.4 – 74.5 – – – 59.0 1.6 53.0 59.0 46.0 1.25 27.5 16.0 1.25 1.25 21.0 0.9 21.0 12.0 16.0 21.0 12.0 10.0 12.0 19.5 8.5 6.0 10.0 14.5 17.0 6.0 15 (20.5) 14.5 6.0 12.0 11.0 15 (20.5) 12.0 7.5 15 (20.2) 9.5 15 (20.2) 6.5 15 (20.2) 15 (12.0) Thread Length Metric (NPT) 4.)7. 20*1007. 3031 3. 132.0 121.0 – – 137.0 3.15 133.0 93.0 3.15 72.0 140.0 83.0 82.0** 63.0 140.0 75.0 73.0 (45.2) 66.0 (45.2) 4)5. 501005. 4025140–104.5 – 124.0 2.5 74.0 54.0 120.0 65.0 59.0 (44) ‘B’ Cores Over Uu aieLse o ls ,Dv 1 Div. cULus MarineListedforClassI, Zone2 cULus ListedforClassI, IECEx ATEX Max . . . . 12.0 6.0 6.0 7.5 6.5 'C' Inner Sheath and Cores Sheath e ae 96–103forrelatedaccessories Seepages • AvailablewithmetricorNPTthreads • Standardneoprenesealsuitableforuseinoperatingtemperatures • Delugebootprovidesenhancedprotectionfromwateringress • Providesexplosionproofcompoundseal(denotedbyredbacknut) • Armourclampingwithnoreversiblecomponentsforeasy • Standardmaterialisnickel-platedbrassforsuperiorcorrosion • Features Inner Max Cable Acceptance 'D' © -60°C (-25°CUL)to80°C on conductorsandweatherproofsealoutersheathofcable installation, minimizingerror resistance 2013 Eaton’sCrouse-Hinds Business GlandType ORDERING EXAMPLE: CAP96959 No. of oe i Max Min Cores Max Sheath ‘E’ 4KX Options Outer Armour 2Includes locknut,fiber washer, earthtag, and K2 Includes locknutandfiberwasher K1 7 Aluminum Bronze 8 Stainlesssteel(316L) 9 (max) OPTIONS . 60–20.9 – 46.0 0.9 shroud rpaels ii ihoto number): option with digit last (replace ‘F’ (less Length Gland entry) NEMA 4XandIP68 GOST-R CEPEL Across Flats Dimensions Hexagon Corners Across ‘G’ 4F 75 4F 20.9 Across Corners ‘G’ Hexagon Dimensions – – – – – – – – – – – – – – – – – – – – – – Flats Across (replace last digit with option number): shroud Gland CEPEL GOST-R and IP68 NEMA 4X OPTIONS 9 Stainless steel (316L) 8 Bronze 7 Aluminum K1 locknut and fiber washer Includes K2 and earth tag, fiber washer, locknut, Includes Length ‘F’ (less entry) 2013 Eaton’s Crouse-Hinds Business © 6.0 46.0 – Cores Max No. Options 4KX 103 for related accessories – CAP01959 ORDERING EXAMPLE: GlandType 4.0 7.5 Min Max resistance cable on conductors -60°C (-25°C UL) to 80°C Outer Sheath ‘E’ Cable Acceptance Features: •is nickel-plated brass for superior corrosion Standard material • and weatherproof seal on outer sheath of Provides a flameproof • by red back nut) Provides explosionproof compound seal (denoted • from water ingress Deluge boot provides enhanced protection • operating temperatures Standard neoprene seal suitable for use in • Available with metric or NPT threads • See pages 96 44 59.0 65.0 120.0 111.0 93.5 16 28.5 41.0 80.0 – 73.7 42.5 50.045.2 56.0 100.0 66.0 103.0 73.0 140.0 120.0 79.2 104.5 45.2 75.0 82.0** 140.0 125.0 121.0 (NPT) Metric Thread 22 (44.0) 66.0 73.0 140.0 120.0 104.5 17 (29.2) 50.0 56.0 100.0 103.0 79.2 17 (29.2) 43.0 48.0 100.0 98.0 70.4 16 (29.2) 28.5 41.0 80.0 104.0 70.4 15 (28.0)15 (28.0) 17.516 (28.5) 23.0 23.0 26.0 33.0 33.0 42.0 60.0 60.018 (42.5) 83.5 92.0 59.0 92.0 65.0 120.0 52.8 60.5 111.0 60.5 93.5 15 (12.0) 15 (22.2)15 (22.2) 4.015 (22.2) 6.515 (22.5) 9.015 (22.5) 7.5 9.015 (27.3) 11.0 12.015 (27.3) 14.5 12.0 6.0 14.5 6.0 17.5 19.5 10.0 19.5 10.0 46.0 26.0 21.0 53.0 59.0 21.0 59.0 42.0 74.5 74.5 83.5 26.4 26.4 33.0 33.0 45.1 45.1 52.8 22 (44.0) 75.0 82.0 140.0 125.0 121.0 22 (46.5) 85.0 92.0** 200.0 128.0 132.0 ATEX IECEx for Class I,cULus Listed 2 Zone Listed for Class I,UL Marine Div. 2 Length ‘B’ – NPT Catalog # CAP012504 CAP012574 CAP011894 CAP011804 CAP011594 CAP011674 CAP011694 CAP011604 CAP011794 CAP011704 CAP011204 CAP011294 CAP011004 CAP011904 CAP011094 CAP011494 CAP011404 CAP012604 CAP011994 CAP012694 CAP012594 CAP012704 " " " " " " " 2 4 2 2 2 2 " " " " " " 4 / 1 / / / / / / 8 2 2 2 4 4 – 1 1 1 1 1 1 / / / / / / 3" 3" 1" 1" 2" 2" 2" 3" 4" 3 1 1 1 3 3 3 3 2 1 1 1 2 Size NPT www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright – – – – Entry Thread Size ‘A’ Entry Thread Metric Catalog # CAP019594 CAP010594 CAP019274 CAP019204 CAP019294 CAP019004 CAP019904 CAP019094 CAP019674 CAP019694 CAP019604 CAP019794 CAP019704 CAP019894 CAP019804 CAP019994 CAP019304 CAP010504 CAP010794

Size Metric

4 M16 456 M20 6 M20 7 M20 7 M25 8 M25 8 M32 M32 M40 99 M40 M50 14 – 14 M90 12 – 12 M63 1011 M63 M63 10 M50 13 – 15 – 13 M75 15 M90 16 M110 n° 10-HS 577243-PDA / P1836754-X Size Gland All dimensions in millimeters unless otherwise noted. *Aluminum not currently available with UL marine certification. **Contact Customer Service or your field sales representative for amended UL marine range. Gland Type: Non-armoured barrier Cable Type: and tray cable (does not terminate the Non-armoured, armoured armour) SELECTION TABLE • II GD - Exd IIC/Exe II/Ex tD LCIE 97 ATEX 6008X • Ex c e IIC/Ex c e II/Ex tD IECEx LCI 05.0004X •Class I, Zone 2 AEx de II/Ex de II cULus Listed for • A, B, C, D UL Marine Listed for Class I, Division 2, Groups • NEMA 4X and IP68 • CEPEL EX-558/05X • GOST-R POCC FR.B03126 • NEPSI N° GYJ071336U & GYJ071337U • DNV N° E-10892 • ABS approbation: • Lloyds Certifications and Compliances: Certifications and International Standards - Standards - International Safety and Increased Flameproof ADE 1FC ADE 4F 76 IP66 • IECExPTB05.0004X • SizesM12-M16:PTB99ATEX3101X • Certifications andCompliances: Gland Type: Non-armoured Cable Type: Non-armoured Gland Size Gland Size All dimensionsinmillimetersunlessotherwisenoted. SELECTION TABLE -LONGTHREAD SELECTION TABLE -SHORT THREAD Ex II2GeII/ExDtDA21 Sizes M20-M63:PTB99ATEX3128X 4F 2M32 M25 M20 M16 32 M12 25 20 16 12 20 6M16 16 3M63 63 0M50 50 2M32 32 0M40 40 25 2M12 12 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Metric Size ercSz MetricCatalog# Metric Size M20 M25 Ex-e Flameproof andIncreasedSafety International Standards- Entry Thread Size‘A’ Entry Thread Size‘A’ GHG 9601955R0005 GHG 9601955R0004 GHG 9601955R0003 GHG 9601955R0002 GHG 9601955R0001 GHG 9601955R0028 GHG 9601955R0023 GHG 9601955R0027 GHG 9601955R0024 GHG 9601955R0026 GHG 9601955R0025 GHG 9601955R0022 GHG 9601955R0021 Metric Catalog# Length ‘B’ Length ‘B’ Thread Metric Thread Metric 001. 103. 6039.6 36.0 35.5 21.0 12.0 10.0 16.0 16.0 15.0 10.0 . . 702. 9031.9 26.4 22.0 16.5 29.0 24.0 20.0 15.0 29.5 25.0 23.0 19.3 17.0 13.0 10.0 8.0 7.0 5.5 5.5 4.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 Cable Acceptance Cable Acceptance Outer Sheath‘E’ Outer Sheath‘E’ i Max Min 27.0 22.0 17.0 12.0 Min 5.5 8.0 5.5 4.0 e ae101forrelatedaccessories Seepage • Availablewithmetricthreads • Availablewithoptionalsiliconesealforextremetemperatures • Standardsiliconesealsuitableforuseinoperatingtemperatures • Formsweatherproofsealonoutersheathofcable • Standardmaterialishigh-impactresistantpolyamide • Features: IECEx 3128 X PTB99 ATEX Sizes M20-M63: 3101 X PTB99 ATEX Sizes M12-M16: © -20° to70°C) -55° to70°C(M12andM16foruseinoperatingtemperatures 2013 Eaton’sCrouse-Hinds Business Max 48.0 35.0 13.0 28.0 21.0 27.0 10.0 7.0 (less entry) (less entry) Length ‘F’ Length ‘F’ Gland Gland 47.0 44.0 25.0 39.5 35.5 29.5 23.0 19.3 cosFasAcross‘G’ Corners Across Flats Across Flats 68.0 20.0 55.0 24.0 46.0 36.0 15.0 29.0 Hexagon Dimensions Hexagon Dimensions IP66 Across ‘G’ Corners 74.8 60.5 26.4 22.0 50.6 39.6 31.9 16.5 4F 77 4F Across CornersAcross ‘G’ Hexagon Dimensions Hexagon Dimensions Across Flats Across Across FlatsAcross Corners Across ‘G’ 2013 Eaton’s Crouse-Hinds Business © IP66 19.3 15.0 16.5 Gland Gland Length ‘F’ Length ‘F’ (less entry) (less entry) 7.0 blue for intrinsically safe circuits) temperatures -55° to 70°C (M12 and M16 for use in operating -20° to 70°C) Features: • polyamide (gland nut is Standard material is high-impact resistant •of cable Forms weatherproof seal on outer sheath • operating temperatures Standard silicone seal suitable for use in • Available with metric threads • See page 101 for related accessories Min Max Min Max Outer Sheath ‘E’ Outer Sheath ‘E’ Cable Acceptance Cable Acceptance 8.0 4.0 8.0 5.5 10.0 23.0 20.0 22.0 8.0 5.5 13.0 25.0 24.0 26.4 8.0 8.0 17.0 29.5 29.0 31.9 12.0 4.0 7.0 19.3 15.0 16.5 12.0 5.5 10.0 23.0 20.0 22.0 13.0 5.5 13.0 25.0 24.0 26.4 13.0 8.0 17.0 29.5 29.0 31.9 15.0 12.0 21.0 35.5 36.0 39.6 15.0 17.0 28.0 39.5 46.0 50.6 16.0 22.0 35.0 44.0 55.0 60.5 16.0 27.0 48.0 47.0 68.0 74.8 10.0 12.0 21.0 35.5 36.0 39.6 Metric Thread Metric Thread Length ‘B’ Length ‘B’ Sizes M12-M16:Sizes ATEX PTB 99 3101 X Sizes M20-M63:ATEX PTB 99 3128 X IECEx www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Metric Catalog # GHG 960 1955 R 0101 GHG 960 1955 R 0102 GHG 960 1955 R 0103 GHG 960 1955 R 0104 GHG 960 1955 R 0105 GHG 960 1955 R 0121 GHG 960 1955 R 0122 GHG 960 1955 R 0123 GHG 960 1955 R 0124 GHG 960 1955 R 0125 GHG 960 1955 R 0126 GHG 960 1955 R 0127 GHG 960 1955 R 0128 Entry Thread Size ‘A’ Entry Thread Entry Thread Size ‘A’ Entry Thread Metric Size Metric Catalog # Metric Size 12 M12 16 M16 20 M20 25 M25 32 M32 40 M40 50 M50 63 M63 12 M12 16 M16 20 M20 25 M25 32 M32 Sizes M20-M63: PTB 99 ATEX 3128 X Sizes M20-M63: PTB 99 D Ex tD A21 Ex II 2 G Ex e II/Ex II 2 SELECTION TABLE – SHORT THREAD – SHORT SELECTION TABLE All dimensions in millimeters unless otherwise noted. Gland Size Gland Size SELECTION TABLE – LONG THREAD SELECTION TABLE International Standards - International Safety and Increased Flameproof • 99 ATEX 3101 X Sizes M12-M16: PTB • IECEx PTB 05.0004X • IP66 Certifications and Compliances: Certifications and Non-armoured Cable Type: Non-armoured Gland Type: Ex-i 4F 78 Gland Type: Non-armoured Cable Type: Non-armoured All dimensionsinmillimetersunlessotherwisenoted. IP66 • ATEXPTB00ATEX3121XExII2GeII/ExDtDA21 • Certifications andCompliances: SELECTION TABLE 4F Gland Size 0M60 M50 M40 M32 M25 60 M20 50 40 32 25 20 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Metric Size Flameproof andIncreasedSafety International Standards- Trumpet Entry Thread Size‘A’ Catalog # Metric GHG 9601949R0116 GHG 9601949R0115 GHG 9601949R0114 GHG 9601949R0113 GHG 9601949R0112 GHG 9601949R0111 Thread Length ‘B’ Metric 603. 608. 5082.5 66.0 55.0 45.1 75.0 35.2 28.6 60.0 50.0 41.0 32.0 89.0 26.0 79.0 71.0 65.0 46.0 50.0 34.0 49.0 27.0 35.0 20.0 26.0 16.0 19.0 13.0 15.0 16.0 11.0 16.0 8.0 15.0 15.0 15.0 15.0 e ae101forrelatedaccessories Seepage • Availablewithmetricthreads • Standardneoprenesealsuitableforuseinoperatingtemperatures • Flaredrearsealprovidesprotectionforcable • Formsweatherproofsealonoutersheathofcable • Standardmaterialishigh-impactresistantpolyamide • Features: TXIP66 ATEX © -40° to85°C Cable Acceptance Outer Sheath‘E’ 2013 Eaton’sCrouse-Hinds Business i Max Min (less entry) Length ‘F’ Gland Across Hexagon Dimensions Flats Corners ‘G’ Corners Across Enlargement and Multiple Sizes M16: PTB 99 ATEX 3101 X IP66 4F Sizes M20-M63: PTB 99 ATEX International Standards - 3128 X Flameproof and Increased Safety IECEx

Gland Type: 4F Non-armoured

Cable Type: Non-armoured

Certifications and Compliances:

• Sizes M16: PTB 99 ATEX 3101 X Sizes M20-M63: PTB 99 ATEX 3128 X Features: Ex II 2 G Ex e II/Ex II 2 D Ex tD A21 • Standard material is high-impact resistant polyamide • Forms weatherproof seal on outer sheath of cable • IECEx PTB 05.0004X • Provides reduced entry threads for larger gland size • IP66 • Standard silicone seal suitable for use in operating temperatures -55° to 70°C (M16 for use in operating temperatures -20° to 70°C) • Available with metric threads • See page 101 for related accessories SELECTION TABLE – ENLARGEMENT

Entry Thread Size ‘A’ Thread Cable Acceptance Gland Hexagon Dimensions Gland Metric Metric Length ‘B’ Outer Sheath ‘E’ Length ‘F’ Across Across Size Size Catalog # Metric Min Max (less entry) Flats Corners ‘G’ 16/20 M16 GHG 960 1956 R0002 12.0 5.5 13.0 25.0 24.0 26.4 20/25 M20 GHG 960 1956 R0003 13.0 8.0 17.0 29.5 29.0 31.9 25/32 M25 GHG 960 1956 R0004 13.0 12.0 21.0 35.5 36.0 39.6 32/40 M32 GHG 960 1956 R0005 15.0 16.0 28.0 39.5 46.0 50.6 40/50 M40 GHG 960 1956 R0006 15.0 21.0 35.0 44.0 55.0 60.5 50/63 M50 GHG 960 1956 R0007 16.0 27.0 48.0 47.0 68.0 74.8

SELECTION TABLE – MULTIPLE Entry Thread Size ‘A’ Thread Cable Acceptance Maximum Gland Hexagon Dimensions Gland Metric Length ‘B’ Outer Sheath ‘E’ Number of Length ‘F’ Across Across Size Size Metric Catalog # Metric Min Max Conductors (less entry) Flats Corners ‘G’ 25 M25 GHG 960 1955 R0054 8.0 4.5 7.0 2 29.5 36.0 39.6 32 M32 GHG 960 1955 R0055 10.0 4.5 7.0 4 39.5 46.0 50.6

All dimensions in millimeters unless otherwise noted.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 79 4F 80 NEMA4XandIP68 • Certifications andCompliances: washer) andtraycable braided marineshipboardleadsheathed(withadditionofearthing Steel wirearmoured,steelbraided,tape Cable Type: Armoured Gland Type: All dimensionsinmillimetersunlessotherwise noted. SELECTION TABLE Gland Size 6– 16 M75 13 6M90 16 M63 13 5M90 M75 15 14 M63 M50 M50 12 M40 11 10 10 7M110 17 4F M40 9 M32 9 M32 M25 M25 8 M25 8 M20 7 M20 6 M20 7 M16 6 5 6 M16 5 M12 5 Metric Size www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright CAP946994 – CAP947394 CAP946804 CAP947504 CAP947204 CAP946894 CAP946704 CAP946794 CAP946774 CAP946604 CAP946694 CAP946674 CAP946504 CAP947594 CAP947304 CAP947294 CAP947004 CAP947094 CAP946904 CAP947794 CAP946594 Catalog # Metric CAP946404 Industrial International Standards- Entry Thread Size‘A’ ADE 4I NPT Size 1 3 2 2 1 1 1 3 3 3 1 1 1 3 3 1 1" 3" 2" 1" 3" 2" 4" / / / / / / / / / 1 1 1 1 1 1 1 4 4 4 2 2 2 8 8 4 / / / / / / / " " " " " " " " " 2 2 2 2 2 4 4 " " " " " " " CAP948804 CAP949504 CAP949204 CAP948894 CAP949564 CAP949294 CAP949704 CAP948704 CAP948795 CAP948774 CAP948604 CAP948694 CAP948674 CAP948504 CAP948594 CAP948404 CAP949604 CAP949404 CAP949949 CAP949004 CAP949904 CAP948904 CAP948994 Catalog # NPT ‘B’ Metric 2(20 308. 209. .5180–132.0 – 93.5 108.0 – 3.15 85.0 93.0 72.0 2.5 82.0 63.0 56.0 22 (42.0) 40.0 48.0 33.0 17 (27.2) 5(53 602. 103. . 30–52.8 – 63.0 1.6 34.0 21.0 27.5 16.0 15 (25.3) 5(53 202. 602. . 60–45.1 – 56.0 1.6 27.5 16.0 21.0 12.0 15 (25.3) 2(20 407. 308. .5140–121.0 – 79.2 104.0 – 3.15 77.0 83.0 63.0 2.5 74.0 54.0 48.0 22 (42.0) 33.0 41.0 27.0 17 (27.2) 2(45 209. 5017031 1. 148.5 – 115.0 3.15 107.0 85.0 92.0 72.0 22 (44.5) 8(05 706. 407. . 20–104.5 93.5 – – 70.4 60.5 92.0 60.5 85.0 – 52.8 – 2.5 – 2.5 74.0 – 74.0 68.0 65.0 68.0 54.0 2.5 63.0 47.0 65.0 2.0 56.0 47.0 2.0 48.0 40.0 1.6 41.0 18 (40.5) 33.0 41.0 18 (40.5) 27.0 41.0 34.0 27.0 34.0 27.0 21.0 34.0 21.0 16 (26.5) 27.5 21.0 16 (26.5) 16.0 15 (26.0) 15 (26.0) 5(02 202. 602. . 60–45.1 33.0 33.0 – 33.0 26.4 26.4 – – 26.4 56.0 20.9 – – – 46.0 42.0 1.6 – – 46.0 1.25 42.0 36.0 1.25 27.5 21.0 1.25 42.0 36.0 16.0 1.25 16.0 0.9 12.0 21.0 20.5 8.5 16.0 16.0 1.25 0.9 12.0 12.0 12.0 12.0 8.5 8.5 15 (20.2) 16.0 16.0 6.0 6.0 12.0 15 (20.2) 12.0 8.5 8.5 8.5 15 (20.2) 6.0 6.0 15 (20.2) 12.0 4.0 8.5 15 (20.2) 6.0 15 (20.2) 4.0 15 (12.0) 15 (12.0) 15 (12.0) Thread Length 4.)6. 207. 3031 0. 132.0 – 108.0 3.15 93.0 72.0 82.0 63.0 – (43.2) (NPT) NEMA 4XandIP68 Inner Sheath i a i Max Min Max Min . . . 12.0 6.0 8.0 4.0 e ae 96 Seepages • AvailablewithmetricorNPTthreads • Availablewithoptionalsiliconesealforextremetemperatures • Standardneoprenesealsuitableforuseinoperatingtemperatures • Anoptionalearthingwasherforusewithleadsheathedcable • Providessealoninnerjacketandweatherproofouter • Armourclampingandbondingwithnoreversiblecomponentsfor • Standardmaterialisnickel-platedbrassforsuperiorcorrosion • Features: Cable Acceptance ‘D’ © of -60°Cto100°C 97) ( seepage sheath ofthecable easy installation,minimizingerror resistance 2013 Eaton’sCrouse-Hinds Business Outer Sheath – ‘E’ 103 forrelatedaccessories Armour (max) . 60–20.9 – 36.0 0.9 ‘F’ (less Length Gland entry) Across Flats Dimensions Hexagon Corners Across ‘G’ 4F 81 4F Length ‘F’ 3.05 (77.47) 3.18 (80.77) 3.05 (77.47) 3.18 (80.77) 3.30 (83.82) 3.18 (80.77) 3.30 (83.82)

1.00 (25.40) 1.00 (25.40) 1.00 (25.40) 1.00 (25.40) 1.08 (27.40) 1.08 (27.40) 1.08 (27.40) Thread Length NPT ‘E’ (Metric mm.)

D B Across Corners ‘D’ 1.75 (44.45) 2.25 (57.15) 1.75 (44.45) 2.25 (57.15) 2.56 (65.02) 2.25 (57.15) 2.56 (65.02) 2013 Eaton’s Crouse-Hinds Business © temperatures from -40°C to +60°C; for temperatures from -40°C please specific temperature information, representative contact your local sales European machinery approvals to ensure that assembly is as trouble-free as to ensure that assembly possible, even with cables the heaviest 0.90 (22.86) 1.18 (29.97) 0.90 (22.86) 1.18 (29.97) 1.39 (35.31) 1.18 (29.97) 1.39 (35.31) NEMA 6P NEMA (Pending) IECEx/ATEX •have generous lead-ins Mating components • allows use in Use of neoprene seal • allow interfacing to Metric size threads • certifications and Wide range of global • See page 102 for related accessories 0.49 (12.45) 0.65 (16.51) 0.49 (12.45) 0.65 (16.51) 0.87 (22.10) 0.65 (16.51) 0.87 (22.10) 0.86 (21.84) 1.14 (28.96) 0.86 (21.84) 1.14 (28.96) 1.35 (34.29) 1.14 (28.96) 1.35 (34.29) F Min. Max. Min. Max. 0.40 (10.16) 0.56 (14.22) 0.40 (10.16) 0.56 (14.22) 0.78 (19.81) ‘A’ Armour O.D.‘A’ ‘B’ Cable O.D.† 0.56 (14.22) 0.78 (19.81) " and above will be available soon. 2 / 1 UL/cULus Listed Listed UL/cULus Cl. I, Div. 1, Groups A, B,Cl. C, II, D Groups E, F, G Cl. III LiquidSeal, an innovative liquid LiquidSeal, an innovative 0.480 0.480 0.713 0.713 1.172 Over Conductors O.D. Max. Inches ‘G’ 0.939 0.939 ® incorrect assembly the right gland is preparation aids to ensure selected every time seal in all instances sizes, ensuring a perfect compound with fast gel and cure times, compound with fast gel reduces waiting times liquid pour times the gland has to be assembled and disassembled during installation to increase corrosion resistance and maintain to increase corrosion resistance environments integrity in the harshest Features: • the opportunity for Designed to minimize •process and field Simple selection • popular cables and hub Full coverage of all • steel Use of nickel-plated brass and stainless • Chico • Complete with integral dam to facilitate • of Integral union design reduces the number E TMCXM20 1 TMCXM20 2 TMCXM25 1 TMCXM25 2 TMCXM40 1 Metric Catalog # TMCXM32 1 TMCXM32 2 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

M20 M20 M25 M25 M40 Entry ‘C’ Thread (Metric Option) M32 M32 G II TMCX

™ A TMCX125 1 C TMCX050 1 TMCX050 2 TMCX075 1 TMCX075 2 NPT Catalog # TMCX100 1 TMCX100 2 " 4 " " " " / 4 2 2 4 1 / / / / SELECTION TABLE All dimensions in inches; metric millimeters shown in parenthesis. Sizes 1 3 1 1 3 Entry Thread ‘C’ †When making your cable gland selection based on Cable O.D., be sure to also observe the Over Conductors O.D. dimension. 1" 1" 1 Gland Type: armoured, and Armoured barrier, TECK non-armoured barrier Cable Type: and Metal-clad and TECK (interlocked continuously welded corrugated and tray cable armoured), unarmoured, Certifications and Compliances: • Class I, Division 1, Groups A, B, C, D • Class II, Groups E, F, G • Class III • NEMA 6P • UL/cULus Listed - File No. E122485 • IECEx/ATEX (Pending) Terminator North American Standards - Standards American North Explosionproof 4F 82 Catalog NumberingSystem: TMCX 0501NPL oeThread Code Hub Size Cable Sealing Range Hub(mm.) 125 100 Metric 075 Hub(in.) 050 NPT Hub Size 5 ½ 050 4 4 ISO M40 ISO M32 M40 ISO M25 M32 ISO M20 M25 1-¼ NPT M20 1” 125 ¾ 100 075 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 1-¼ 1” ¾ ½ ” ” NPT ” NPT ” ” NPT ” Explosionproof North American Standards- M40 M32 M25 M20 Terminator 1 2 1 2 1 2 1 1 2 1 2 1 2 1 Code Range Sealing 40 32 25 20 Sealing Range Standard Cable 22.0 mm-35.3 22.0 mm-35.3 16.5 mm-29.9 16.5 mm-29.9 12.4 mm-22.8 16.5 mm-29.9 12.4 mm-22.8 0.87” -1.39” 0.87” -1.39” 0.65” -1.18” 0.65” -1.18” 0.49” -0.90” 0.65” -1.18” 0.49” -0.90” ™ II TMCX l III Cl. G F, GroupsE, D II, C, Cl. B, GroupsA, 1, Div. I, Cl. UL/cULus Listed © 2013 Eaton’sCrouse-Hinds Business NP SS BLANK Material Nickel-plated Brass 316 StainlessSteel Aluminum IECEx/ATEX (Pending) NEMA 6P L BLANK Compound Type Liquid TSC 4F 83 4F Across Across Corners ‘G’ Hexagon Dimensions Flats Across Across 2013 Eaton’s Crouse-Hinds Business © Gland Length ‘F’ (less entry) NEMA 4 and IP56 NEMA locations Wet of cable armour (MC cable only) watertight seal on outer sheath of cable -25° to 60°C environments (see page 102) Features: •is aluminum Standard material • grounding continuity Stainless steel copper-plated spring provides • conductors and Provides explosionproof compound seal on • operating temperatures Standard neoprene seal suitable for use in • in aggressive Cold Shrink™ Kit is available for extra protection • Available with NPT threads • See pageaccessories 102 for related Outer Sheath ‘E’ Cable Acceptance Min Max Min Max UL Listed UL Listed Class I,CSA Certified Div. 1, Groups A, B, C, D III Class II; Class Armour Range ‘H’ www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 0.7500.7810.938 0.440 0.600 0.650 0.800 0.850 0.490 1.120 0.650 0.850 0.781 1.000 1.313 2.625 2.875 3.125 1.250 1.500 1.875 1.375 1.625 2.000 0.9690.9691.000 1.1001.438 1.3301.438 1.400 1.5701.625 1.610 1.9301.625 1.150 2.060 2.450 1.380 2.470 2.950 1.630 1.625 3.020 3.500 1.990 1.781 3.520 2.525 2.313 4.020 3.025 2.719 3.125 3.585 3.281 3.375 3.781 5.313 4.281 6.063 2.250 6.063 2.500 7.750 3.250 8.313 3.750 4.500 2.438 5.000 2.750 5.500 3.500 4.000 4.875 5.375 5.875 Length Thread Thread ‘B’ NPT

TMCX6206 TMCX8302 TMCX9352 TMCX10402 TMCX4140 TMCX5161 TMCX7247 TMCX165 TMCX285 TMCX3112 NPT Catalog #

" " " " 2 " " 4 2 2 / / / / 2 4 Entry Thread Size ‘A’ Entry Thread 1 1 1 1 / / 1" 2" 3" 4" 1 3 1 1 2 3 Size NPT Class II; Class III – UL File E122485, CSA File LR13046 Class II; Class III – UL File SELECTION TABLE All dimensions in inches unless otherwise noted. • Class I, Div. 1, Groups, A, B, C, D; UL Listed, CSA Certified •rated NEMA 4 and IP56 • Wet locations Gland Type: armoured and non-armoured barrier Armoured barrier, TECK Cable Type: or continuously welded corrugated Metal-clad (interlocked and tray cable armoured), non-armoured Compliances: Certifications and North American Standards - Standards American North Explosionproof TMCX 4F 84 Lloyds • DNVN°E-10892 • ABSapprobation: • NEPSIN°GYJ071336U&GYJ071337U • GOST-RPOCCFRBo2011 • CEPEL-EX-558/05X • NEMA4XandIP68 • cULusMarineListedforClassI,Division1,GroupsA,B,C,D • cULusListedforClassI,Zone2AExdeII/ExII • IECExLCI05.0004X • ATEXLCIE976008X-ExdIIC/ExeII/ExtD/ExII2GD • Certifications andCompliances: earthing washer) braided marineshipboardandleadsheathed(withadditionof Steel wirearmoured,steelbraided,tape Cable Type: Armoured barrier Gland Type: Gland SELECTION TABLE **Contact CustomerServiceoryourfieldsales representativeforamendedULmarinerange. *Aluminum notcurrentlyavailablewithULmarine certification. All dimensionsinmillimetersunlessotherwise noted. Size n° 10-HS577243-PDA/P1836754-X 6– 16 7M110 17 M90 16 5M90 – 15 M75 14 14 M63 M50 12 M50 11 M40 10 10 5– 15 M63 13 3M75 13 M40 M32 M32 9 M25 9 M25 8 M20 8 M20 7 M20 7 6 5 M16 5 4F Metric Size www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Explosionproof North American Standards- ADE 6FC CAP970794 CAP970504 CAP970594 CAP970304 CAP970294 CAP970004 CAP970094 CAP969904 CAP970204 CAP969994 CAP969804 CAP969894 CAP969704 CAP969794 CAP969604 CAP969694 CAP969674 CAP970394 CAP969594 Catalog # Entry Thread Size‘A’ Metric – – – NPT Size 3 2 1 1 1 1 2 3 3 3 1 1 1 3 4" 3" 1" 1" 3" 2" 2" 3" / / / / / / 1 1 1 1 1 1 1 1 4 4 2 2 2 8 / / / / / / / / " " " " " " 2 2 2 2 2 2 4 4 " " " " " " " " CAP972704 CAP972504 CAP972604 CAP972694 CAP972404 CAP972494 CAP972004 CAP972094 CAP971904 CAP971994 CAP972594 CAP972274 CAP971804 CAP971894 CAP971704 CAP971794 CAP971604 CAP971674 CAP971674 CAP974594 CAP972204 CAP972574 Catalog # NPT 2(65 509.* 0. 5017031 4. 148.5 132.0 – – 142.0 137.0 3.15 3.15 107.0 85.0 93.0 200.0 72.0 92.0** 140.0 85.0 82.0 22 (46.5) 75.0 22 (44.0) 8(25 906. 2. 407. . 2. 104.5 93.5 – 70.4 – 60.5 124.0 60.5 118.0 52.8 – – 2.5 – 2.5 104.0 – 74.0 92.0 65.0 54.0 92.0 2.5 46.0 120.0 83.5 2.0 100.0 65.0 48.0 2.0 56.0 41.0 33.0 59.0 1.6 41.0 27.0 50.0 18 (42.5) 80.0 34.0 27.0 18 (42.5) 60.0 41.0 21.0 60.0 33.0 36.5 42.0 33.0 29.0 16 (27.2) 28.0 29.0 16 (26.5) 23.0 15 (26.0) 15 (26.0) 5(53 302. 202. 40168. 52.8 45.1 45.1 – 33.0 – 26.4 26.4 33.0 – 83.5 20.9 – 74.5 – – – 74.5 1.6 – 1.6 59.0 34.0 53.0 46.0 1.6 59.0 27.5 21.0 46.0 1.25 27.5 16.0 1.25 42.0 0.9 1.25 21.0 16.0 21.0 0.9 16.0 28.0 21.0 12.0 12.0 21.0 19.5 8.5 12.0 23.0 12.0 10.0 6.0 19.5 17.0 15 (25.3) 10.0 6.0 6.0 14.5 6.0 17.0 15 (25.3) 14.5 12.0 6.0 15 (20.5) 11.0 7.5 12.0 15 (20.5) 9.5 7.5 15 (20.2) 6.5 15 (20.2) 6.5 15 (20.2) 15 (12.0) 2(40 607. 4. 308. .5130–121.0 – 79.2 133.0 3.15 – 83.0 63.0 108.0 140.0 2.5 73.0 66.0 56.0 22 (44.0) 40.0 100.0 48.0 43.0 17 (29.2) 7(92 005. 0. 606. . 1. 93.5 – 118.0 2.5 65.0 46.0 100.0 56.0 50.0 17 (29.2) Thread Length Metric (NPT) 4.)7. 20*1007. 3031 3. 132.0 121.0 – – 137.0 133.0 3.15 3.15 93.0 72.0 83.0 140.0 63.0 82.0** 140.0 75.0 73.0 (45.2) 66.0 (45.2) 4)5. 501005. 4025140–104.5 – 124.0 2.5 74.0 54.0 120.0 65.0 59.0 (44) ‘B’ Cores Over Max 'C' Uu aieLse o ls ,Dv 1 Div. cULus MarineListedforClassI, Zone2 cULus ListedforClassI, IECEx ATEX Inner Sheath and Cores Sheath Inner e ae 96 Seepages • AvailablewithmetricorNPTthreads • Standardneoprenesealsuitableforuseinoperatingtemperatures • Delugebootprovidesenhancedprotectionfromwateringress • Providesexplosionproofcompoundseal(denotedbyredbacknut) • Armourclampingwithnoreversiblecomponentsforeasy • Standardmaterialisnickel-platedbrassforsuperiorcorrosion • Features: Max Cable Acceptance 'D' © -60°C (-25°CUL)to80°C on conductorsandweatherproofsealoutersheathofcable installation, minimizingerror resistance 2013 Eaton’sCrouse-Hinds Business GlandType ORDERING EXAMPLE: No. of oe i Max Min Cores Max CAP96959 – Sheath ‘E’ 99 forrelatedaccessories Outer 4KX Options Armour (max) 2Includes locknut,fiber washer, earthtag, and K2 Includes locknutandfiberwasher K1 7 Aluminum Bronze 8 Stainlesssteel(316L) 9 OPTIONS shroud ‘F’ (less Length Gland entry) rpaels ii ihoto number): option with digit last (replace NEMA 4XandIP68 GOST-R CEPEL Across Flats Dimensions Hexagon Corners Across ‘G’ 4F 85 4F Across Corners ‘G’ Hexagon Dimensions Flats Across Across (replace last digit with option number): Gland CEPEL GOST-R IP68 NEMA 4X and shroud Length ‘F’ (less entry) OPTIONS 9 Stainless steel (316L) 8 Bronze 7 Aluminum K1 locknut and fiber washer Includes K2 and earth tag, fiber washer, locknut, Includes 2013 Eaton’s Crouse-Hinds Business © 6.0 46.0 – 20.9 Cores Max No. Options 4KX 99 for related accessories – CAP01959 ORDERING EXAMPLE: GlandType 4.0 7.5 Min Max Outer Sheath ‘E’ resistance cable on conductors -60°C (-25°C UL) to 80°C Cable Acceptance Features: •is nickel-plated brass for superior corrosion Standard material • and weatherproof seal on outer sheath of Provides a flameproof • by red back nut) Provides explosionproof compound seal (denoted • from water ingress Deluge boot provides enhanced protection • operating temperatures Standard neoprene seal suitable for use in • Available with metric or NPT threads • See pages 96 44 59.0 65.0 120.0 111.0 – 93.5 16 28.5 41.0 80.0 – – 73.7 42.5 50.045.2 56.045.2 100.0 66.0 103.0 75.0 73.0 82.0** 140.0 – 140.0 120.0 79.2 125.0 – – 104.5 121.0 (NPT) Length Thread ATEX IECEx for Class I,cULus Listed Zone 2 for Class I,UL Marine Listed Div. 2 15 (28.0)15 (28.0) 17.516 (28.5) 23.0 23.0 26.0 33.0 33.0 42.0 60.0 60.018 (42.5) 83.5 92.0 59.0 92.0 – 65.0 – – 120.0 52.8 60.5 111.0 60.5 – 93.5 15 (12.0) 15 (22.2)15 (22.2) 4.015 (22.2) 6.515 (22.5) 9.015 (22.5) 7.5 9.0 11.0 12.0 14.5 6.0 14.5 6.0 19.5 10.0 10.0 46.0 21.0 53.0 59.0 59.0 – 74.5 – – – 26.4 – 26.4 33.0 33.0 45.1 15 (27.3) 12.0 19.5 21.0 74.5 – 45.1 15 (27.3) 17.5 26.0 42.0 83.5 – 52.8 22 (44.0) 75.022 (46.5) 85.0 82.0 92.0** 140.0 200.0 125.0 128.0 – – 121.0 132.0 16 (29.2) 28.5 41.0 80.0 104.0 – 70.4 22 (44.0) 66.0 73.0 140.0 120.0 – 104.5 17 (29.2) 43.0 48.0 100.0 98.0 – 70.4 17 (29.2) 50.0 56.0 100.0 103.0 – 79.2 ‘B’ Metric – NPT Catalog # CAP011094 CAP011494 CAP011404 CAP012604 CAP012694 CAP011994 CAP011904 CAP012504 CAP011594 CAP011674 CAP011694 CAP011604 CAP011794 CAP011704 CAP011894 CAP011804 CAP012594 CAP012704 CAP011004 CAP012574 CAP011294 CAP011204 " " " " " " " 2 2 2 2 2 " " " " " " 4 4 / / / / / / / 8 2 2 2 4 4 – 1 1 1 1 1 1 1 / / / / / / 3" 1" 1" 3" 4" 2" 3" 2" 2" 3 1 1 1 3 3 1 1 1 2 3 3 2 Size NPT www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright – – – – Entry Thread Size ‘A’ Entry Thread Metric Catalog # CAP019594 CAP019904 CAP019094 CAP019674 CAP019694 CAP019604 CAP019794 CAP019704 CAP019894 CAP019804 CAP019994 CAP019304 CAP010504 CAP010794 CAP019004 CAP010594 CAP019294 CAP019204 CAP019274

Size Metric

4 M16 99 M40 M50 456 M20 6 M20 7 M20 7 M25 M25 M32 8 M32 8 M40 13 M75 1516 M90 M110 10 M50 13 – 14 M90 11 M63 15 – 10 M63 14 – 12 M63 12 – n° 10-HS 577243-PDA / P1836754-X Size Gland All dimensions in millimeters unless otherwise noted. *Aluminum not currently available with UL marine certification. **Contact Customer Service or your field sales representative for amended UL marine range. SELECTION TABLE • II GD - Exd IIC/Exe II/Ex tD LCIE 97 ATEX 6008X • Ex c e IIC/Ex c e II/Ex tD IECEx LCI 05.0004X •Class I, Zone 2 AEx de II/Ex de II cULus Listed for • Class I, Division 2, Groups A, B, C, D UL Marine Listed for • NEMA 4X and IP68 • CEPEL EX-558/05X • GOST-R POCC FR.B03126 • NEPSI N° GYJ071336U & GYJ071337U • DNV N° E-10892 • ABS approbation: • Lloyds Certifications and Compliances: Certifications and Gland Type: Non-armoured barrier Cable Type: and tray cable (does not terminate the Non-armoured, armoured armour) North American Standards - Standards American North Explosionproof ADE 1FC ADE 4F 86 ClassIII–CSAFileLR13046 • ClassII,Div.1&2,GroupsE,F,G • CSACertifiedClassI,Div.1,GroupsC,D • Certifications andCompliances: Non-armoured andtraycable Cable Type: Portable cordconnector Gland Type: ClassII,Div.1,Groups,F,G–ULFileE10279 • UL,cULListedClassI,Div.1,GroupsB,C,D • Certifications andCompliances: Non-armoured Cable Type: Portable cordconnector Gland Type: SELECTION TABLE All dimensionsininchesunlessotherwisenoted. SELECTION TABLE All dimensionsininchesunlessotherwisenoted. P ieNPTCatalog# NPT Size NPT Size 4F 3 3 3 / / / 4 4 1 1 1 4 " " 3 3 1 " 1" 1" / / / 1 1 1 4 4 2 / / / Entry Thread Size‘A’ 4 4 4 " " " " " " nr hedSz A OuterSheath‘E’ Entry Thread Size‘A’ www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright EBY2672 EBY2682 EBY26102 NPT Catalog# CGBS3016 CGBS3015 CGBS4019 CGBS4018 CGBS4017 CGBS2014 CGBS2013 CGBS1013 Explosionproof North American Standards- CGBS andEBY Form .5 0.437 0.250 .0 0.625 0.500 .7 0.500 0.375 .2 .5 2 2 0.750 0.625 0.625 0.500 B B .0 .8 3 3 2 1.188 1.000 0.875 1.000 0.875 0.750 B B B i Max Min .7 .0 5 5 5 0.500 0.437 0.437 0.375 0.312 0.312 A A A Min Outer Sheath‘E’ CGBS: CSA CertifiedClassI, Class III G F, GroupsE, 1&2, Div. Class II, i.1 rusC D GroupsC, 1, Div. AvailablewithNPTthreads • Standardneoprenesealsuitableforuseinoperating • Threepressureconnectorsfor3-conductorcord, • Three,12-inchlong,#12typeSF-2(150°Crating)stranded • Factorysealedconductorsandsealonoutersheathofcable • Standardmaterialisaluminum • EBY Features: AvailablewithNPTthreads • Standardneoprenesealsuitableforuseinoperating • BodywellforChicoAsealingcompound(forordering • Glandnut–aluminum • Body–steelwithzincelectroplateandchromatefinishcoat • CGBS Features: © temperatures -25°to40°C range #18to#12AWG grounding wire pigtails; twocircuitwiresandoneidentified temperatures -25°to40°C information pleasecontactcustomerservice) Max 2013 Eaton’sCrouse-Hinds Business Gland Length‘F’(lessentry) 13 15 9 1 7 1 1 1 / / / / / / / / 16 2 16 16 8 4 4 4 " " " " " " " " EBY: ls I i.1 rusF G GroupsF, 1, Div. Class II, cULListedClassI, UL, i.1 rusB ,D C, GroupsB, 1, Div. 4F 87 4F Across Across Corners ‘G’ Hexagon Dimensions Flats Across Across 2013 Eaton’s Crouse-Hinds Business © entry) Gland Length ‘F’ (less of cable armour -25° to 60°C environments (see page 102) Wet locations Wet Features: •is aluminum Standard material • grounding continuity Stainless steel copper-plated spring provides • Watertight seal on outer sheath of cable •in operating temperatures Standard neoprene seal suitable for use • in aggressive Cold Shrink™ Kit is available for extra protection • Available with NPT threads • See page 102 for related accessories Outer Sheath ‘E’ Cable Acceptance Min Max Min Max UL, CSA ListedIP56 NEMA 4 and Armour Range ‘H’ www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 0.938 0.800 1.120 0.850 1.313 2.625 1.875 2.000 1.0001.438 1.5701.625 2.450 2.060 3.500 3.020 1.630 4.020 2.525 2.313 3.585 3.281 4.500 4.281 4.875 3.250 5.500 4.500 5.500 3.500 4.875 5.875 0.7500.781 0.440 0.600 0.650 0.850 0.490 0.650 0.781 1.000 2.375 2.625 1.250 1.500 1.375 1.625 0.9690.9691.438 1.100 1.3301.625 1.400 1.930 1.610 1.150 2.950 2.470 1.380 1.625 3.520 1.990 1.781 2.750 3.025 2.719 2.750 3.781 2.250 4.750 2.500 5.375 3.750 2.438 5.000 2.75 4.000 5.375 Length Thread Thread ‘B’ NPT

TMC3112 TMC6206 TMC8302 TMC10402 NPT Catalog # TMC165 TMC285 TMC4140 TMC5161 TMC7247 TMC9352 " " " "

" " 4 2 2 2 / / / / 2 4 1 1 1 1 / / 1" 2" 3" 4" 3 1 1 2 3 1 Size NPT Entry Thread Size ‘A’ Entry Thread All dimensions in inches unless otherwise noted. • E36379 UL Listed – UL File • File LR291 CSA Listed – CSA • NEMA 4 and IP56 • Wet locations Certifications and Compliances: Certifications and Gland Type: Armoured and TECK armoured Cable Type: or continuously welded corrugated armoured) Metal-clad (interlocked and TECK SELECTION TABLE North American Standards - Standards American North General Purpose TMC EK5 EK5 STC001STECK050 1PVC TECK0501SS TECK0501S TECK050 1 EK0 6TC402S–– – – TECK35023PVC TECK35022PVC – TECK30021PVC TECK40026S – TECK30020PVC TECK400 26 TECK40025S – TECK30019PVC TECK400 25 TECK40024S – TECK25018PVC TECK400 24 TECK35023S TECK350 23 – TECK25017PVC TECK35022S – TECK20016PVC TECK350 22 TECK30021S – TECK20015PVC TECK300 21 TECK30020S – TECK20014PVC TECK300 20 TECK30019S – TECK20013PVC TECK300 19 TECK25018S TECK15012PVC TECK250 18 – TECK25017S TECK15011PVC – TECK250 17 TECK20016S TECK12510PVC – TECK1259PVC TECK200 16 TECK20015S – TECK200 15 TECK20014S – TECK200 14 TECK20013S – TECK200 13 TECK15012S – TECK150 12 TECK150 11S – TECK150 11 – TECK125 10S TECK125 10 TECK1259S TECK125 9 EK2 EK2 S–TECK1258PVC – TECK1007PVC TECK1007SS TECK1258S TECK075 6PVC TECK0756SS TECK125 8 TECK1007S TECK075 5PVC TECK100 7 TECK0755SS TECK0756S TECK050 4PVC TECK075 6 TECK0504SS TECK0755S TECK0503PVC TECK075 5 TECK0503SS TECK0504S TECK050 2PVC TECK050 4 TECK0502SS TECK0503S TECK050 3 TECK0502S TECK050 2 4F 88 Armoured Gland Type: Wetlocations • Type4andIP56 • CSACertifiedClassII,Div.1&2,GroupsE,F,G;III– • Certifications andCompliances: TECK armoured Cable Type: SELECTION TABLE All dimensionsininchesunlessotherwisenoted. Catalog # Aluminum CSA FileLR13046 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Catalog # Steel General Purpose North American Standards- TECK aao PVCCatalog# Catalog # Steel Stainless Class III-CSA G F, GroupsE, 1&2, Div. CSA CertifiedClassII, 3 3 2 2 1 1 1 1 1 3 3 1 1 1 1 "1403904204104305006156.500 6.500 6.125 6.500 6.125 5.000 6.125 5.000 4.340 5.000 4.185 5.250 4.120 4.030 5.250 3.965 5.000 4.220 4.900 3.810 4.900 4.065 5.000 3.910 4.600 3.930 5.000 3.480 3.755 1.400 5.000 3.270 3.600 3.210 4.400 1.400 3.060 3.000 4.400 4" 1.400 4.125 3.390 2.790 4.000 4" 4.125 3.190 4.000 4.000 4" 3.042 3.750 2.970 4.000 2.750 2.870 3.750 1.400 4.000 2.565 2.640 2.500 1.400 4.000 2.375 2.300 3" 1.400 2.187 2.656 2.100 3" 2.485 1.900 3" 2.390 2.280 2.190 2.107 0.875 1.990 0.875 1.790 2" 0.825 2" 0.825 2" 2" "0701071251171352652202.400 2.250 2.625 1.375 1.187 1.295 1.077 0.750 1" / / / / / / 1 1 1 1 1 1 1 1 1 4 4 2 2 2 2 / / / / / / / / / 2 2 2 2.125 2 2.125 2.000 1.600 2.000 2.500 1.600 1.500 2.500 1.205 1.500 1.500 2.300 1.065 2 1.025 1.350 1.375 2.300 0.985 2 0.880 1.125 1.250 2.300 0.885 4 0.825 0.985 2.300 0.760 4 0.915 0.725 0.905 0.650 0.770 4 0.600 0.630 0.805 0.715 0.525 0.630 0.680 " 0.615 0.630 0.570 " 0.490 0.630 " 0.415 0.630 " 0.630 " " Size ‘A’ Thread .0 .4 .7 .1 .7 .0 .0 5.900 5.900 5.500 5.600 5.000 5.000 3.870 3.690 4.750 3.610 4.750 3.420 4.500 3.770 4.500 5.000 3.590 3.440 5.000 2.840 3.270 1.400 2.640 2.580 1.400 " 3.750 2.380 2.750 " 3.600 3.500 2.560 3.125 2.440 3.750 3.900 3.125 2.240 1.300 3.000 3.800 2.187 3.125 1.300 3.000 3.500 1.965 " 1.900 3.000 3.400 1.875 " 1.700 3.500 2.107 1.625 1.600 1.885 1.625 1.790 1.500 1.795 1.590 1.350 0.800 1.545 1.490 0.800 1.545 " 1.390 0.800 " 1.240 0.800 " 0.800 " " Entry NPT Size ColdShrink • Standardneoprenesealsuitableforuseinoperatingtemperatures • Watertightsealonoutersheathofcable • Stainlesssteelcopper-platedspringprovidesgroundingcontinuity • Standardmaterialisaluminum • Features: e ae102forrelatedaccessories Seepage • AvailablewithNPTthreads • Anintegralo-ringsealonentrythreads • © niomns(e ae102) environments (seepage -25° to60°C of cablearmour(TECKonly) ‘B’ NPT Thread Length 2013 Eaton’sCrouse-Hinds Business i a i Max Min Max Min Armour Range‘H’ ™ Kit isavailableforextraprotectioninaggressive Cable Acceptance Outer Sheath‘E’ Wet locations Type 4andIP56 Length Gland entry) (less ‘F’ Corners Across Across Flats ‘G’ Dimensions Hexagon 4F 89 4F Across Corners ‘G’ iron alloy with ® Flats Across Hexagon Dimensions ‘G’ External 2013 Eaton’s Crouse-Hinds Business Diameter © Gland Length ‘F’ (less entry) and chromate finish coat electrogalvanized and aluminum acrylic paint -25° to 40°C Features: •and gland nuts – steel with zinc electroplate Form A - D bodies • Form E - F bodies and gland nuts – Feraloy • Weatherproof seal on outer sheath of cable • operating temperatures Standard neoprene seal suitable for use in • Available with NPT threads • Available in all aluminum construction • See page 102 for related accessories cULus Listed cULus Min Max Outer Sheath ‘E’ Cable Acceptance NPT Thread Length ‘B’ www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright A 0.438 0.125 0.250 1.063 – 0.750 0.875 A 0.438AAA 0.375 0.625† 0.625† 0.625† 0.437 0.125 0.250 0.375 1.063 0.250 0.375 0.437 1.000 – 1.000 1.000 – 0.750 – – 0.875 0.875 0.875 0.875 1.188 1.188 1.188 A 0.438 0.250 0.375 1.063 – 0.750 0.875 BB 0.750*†B 0.750*†BB 0.375B 0.625† 0.500 0.625† 0.625† 0.500 0.625† 0.625 0.125B 0.250 0.375 1.313 0.500 0.250 1.313 0.688† 0.375 0.500 0.625 – 1.375 0.250 – 1.375 1.375 1.375 0.375 1.000 – 1.000 – – 1.375 – 1.188 1.060 1.188 1.060 1.060 – 1.060 1.250 1.250 1.250 1.250 1.375 1.625 BBB 0.438 0.438 0.438BB 0.125 0.250 0.750*† 0.375 0.750*† 0.250 0.375 0.500 0.125 0.250 1.313 1.313 0.250 1.313 0.375 – 1.313 – 1.313 – 1.000 – 1.000 – 1.000 1.188 1.188 1.000 1.188 1.000 1.188 1.188 B 0.688† 0.375 0.500 1.375 – 1.375 1.625 D 0.625*† 0.875 1.000 2.500 2.250 – – DDD 0.625*† 0.625*† 0.625*† 0.875 1.000 1.188 1.000 1.188 1.375 2.375 2.375 2.375 2.375 2.375 2.375 – – – – – – CC 0.625* 0.625*†CC 0.625 0.750 0.625*† 0.750 0.625*† 0.875 0.625 1.750 0.750 1.750 0.750 0.875 – – 1.750 1.750 1.500 1.500 – – 1.656 1.656 1.630 1.630 1.656 1.656 C 0.688*† 0.500 0.625 1.688 – 1.500 1.875 C 0.688*† 0.625 0.750 1.688 – 1.500 1.875 C 0.688*† 0.750 0.875 1.688 – 1.500 1.875 C 0.688† 0.875 1.000 1.688 – – 1.875 Form NPT Catalog # CGB3814 CGB297*† CGB298*† CGB194*† CGB195*† CGB196* CGB197*† CGB292† CGB293† CGB294† CGB295† CGB296*† CGB393† CGB3817 CGB3892 CGB3893 CGB3894 CGB114† CGB116† CGB117† CGB192*† CGB193*† CGB3816 CGB394† CGB399*† CGB3911*† CGB398*† CGB395*† CGB396*† CGB397*† CGB3239† " " " " " " " " " " " " " " " " " " " " " " 4 4 2 2 2 2 4 4 4 4 4 8 8 8 8 2 2 2 2 2 8 8 / / / / / / / / / / / / / / / / / / / / / 1" 1" 1" 1" 1" 1" 1" 1" 1" / 3 1 1 1 1 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 3 3 Entry Thread Size ‘A’ Entry Thread Size NPT installed in accordance with NEC501.10(B)(2) installed in accordance All dimensions in inches unless otherwise noted. *With optional Sealing Gasket. †With optional Aluminum Construction. SELECTION TABLE •File E23223 cULus Listed - UL • Class I, Div. 2 hazardous locations when Suitable for use in Certifications and Compliances: Certifications and North American Standards - Standards American North General Purpose Non-armoured Cable Type: cable Non-armoured and tray Gland Type: CGB 4F 90 Entry Thread Size‘A’ 4F 1 1 1 1 1 1 1 2 2 1 1 1 2 2 NPT Size 2" 3" 3" 2" 2" 2" 1 1 1 1 1 1 1 1 1 1 1 1 1 1 / / / / / / / / / / / / / / 4 2 2 2 2 2 2 2 2 2 4 4 4 4 " " " " " " " " " " " " " " www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright CGB7920 CGB7917 CGB7915 CGB7913 CGB5915 CGB5913 CGB5911 CGB599 CGB598 CGB4915 CGB4913 CGB4911 CGB499 CGB498 CGB6913 CGB8917 Catalog # NPT CGB8920 CGB6915 CGB6917 CGB6920 General Purpose North American Standards- CGB Form .1 .8 .7 .1 .5 – – – – – – – – 2.250 2.250 – 2.250 – 2.313 2.313 2.313 2.250 1.375 2.250 1.188 1.000 2.313 1.188 2.313 1.000 0.875 1.375 0.813 1.188 0.813 0.813 1.188 1.000 D D 0.688 D 0.688 D D .8 .7 .0 .1 .5 – – 2.250 2.313 1.000 0.875 0.688 D .0 .2 .7 .2 .2 – – – – – – 3.125 3.125 – – 2.625 – – 2.625 3.000 1.875 3.000 1.625 – – 2.625 1.625 2.625 1.375 3.000 1.875 3.000 1.000 1.625 1.000 2.625 1.625 2.625 E 1.375 E 1.875 0.813 1.625 0.813 1.625 1.375 E E 0.688 0.688 E E .1 .7 .2 .2 .0 – – 3.000 2.625 1.625 1.375 0.813 E .1 .2 .7 .2 .0 – – 3.000 2.625 1.875 1.625 0.813 E .0 .8 .0 .2 .5 – – – – 3.750 3.750 2.625 2.625 2.500 2.188 2.188 1.875 1.000 1.000 F F .0 .7 .8 .2 .5 – – 3.750 2.625 2.188 1.875 1.000 F .0 .8 .0 .2 .5 – – 3.750 2.625 2.500 2.188 1.000 F .1 .7 .8 .6 .5 – – 3.750 2.563 2.188 1.875 0.813 F .1 .8 .0 .6 .5 – – 3.750 2.563 2.500 2.188 0.813 F Length ‘B’ Thread NPT Cable Acceptance i Max Min Outer Sheath‘E’ © 2013 Eaton’sCrouse-Hinds Business (less entry) Length ‘F’ Gland cULus Listed Diameter External ‘G’ Hexagon Dimensions Across Flats Corners ‘G’ Corners Across 4F 91 4F External Diameter ‘G’ iron alloy ® 2013 Eaton’s Crouse-Hinds Business © Gland Length ‘F’ (less entry) -25° to 40°C cULus Listed cULus • Standard gland nut material is steel • Weatherproof seal on outer sheath of cable •in operating temperatures Standard neoprene seal suitable for use • Available with NPT threads • See page 102 for related accessories Features: • 45° angle with male thread • Standard body material is Feraloy Min Max Outer Sheath ‘E’ Cable Acceptance 0.630 0.750 0.875 2.000 1.625 0.6300.6300.6300.630 0.5000.6300.630 0.6250.630 0.625 0.125 0.750 0.250 0.375 0.250 0.500 0.375 0.625 0.500 0.625 1.688 0.750 2.063 1.938 1.938 1.938 1.938 2.000 1.188 1.625 1.141 1.141 1.125 1.125 1.625 0.6300.6300.630 0.125 0.250 0.250 0.375 0.375 0.500 1.688 1.688 1.688 1.188 1.188 1.188 0.630 0.750 0.875 2.063 1.625 ‘B’ NPT www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Thread Length Thread CGD297 CGD195 CGD196 CGD292 CGD293 CGD294 CGD295 CGD296 CGD192 CGD193 CGD194 CGD197 " " " " " " " " " " " " 2 4 2 2 4 4 4 4 4 2 2 2 / / / / / / / / / / / / 1 3 1 1 3 3 3 3 3 1 1 1 Entry Thread Size ‘A’ Entry Thread installed in accordance with NEC501.10(B)(2) installed in accordance NPT Size NPT Catalog # All dimensions in inches unless otherwise noted. Gland Type: Non-armoured Cable Type: cable Non-armoured and tray Compliances: Certifications and •File E23223 cULus Listed - UL • Class I, Div. 2 hazardous locations when Suitable for use in North American Standards - Standards American North General Purpose CGD SELECTION TABLE 4F 92 SuitableforuseinClassI,Div.2hazardouslocationswhen • cULusListed-ULFileE23223 • Certifications andCompliances: Non-armoured andtraycable Cable Type: Non-armoured Gland Type: All dimensionsininchesunlessotherwisenoted. SELECTION TABLE installed inaccordancewithNEC501.10(B)(2) 4F NPT Entry Thread Size‘A’ Size 3 3 3 3 3 3 1 1 1 1 1 1 1" 1" 1" 1" 1" 1" 1" / / / / / / / / / / / / 4 4 4 4 4 4 2 2 2 2 2 2 " " " " " " " " " " " " www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright CGE3911 CGE399 CGE398 CGE3239 CGE397 CGE396 Catalog # NPT CGE395 CGE297 CGE296 CGE295 CGE294 CGE293 CGE292 CGE197 CGE196 CGE195 CGE194 CGE193 CGE192 General Purpose North American Standards- CGE ‘B’ NPT Thread Length .1 .80135 .5 2.250 2.656 1.3750 1.1880 0.710 .1 .00118 .5 1.625 2.656 1.1880 1.0000 0.710 .1 .70100 .5 2.250 2.656 1.0000 0.8750 0.710 .1 .70100 .9 2.250 2.094 1.0000 0.8750 0.710 .1 .50085 .9 1.625 2.094 0.8750 0.7500 0.710 .1 .20070 .9 1.625 2.094 0.7500 0.6250 0.710 .1 .00065 .6 1.625 2.063 0.6250 0.5000 0.710 .1 .50085 .7 1.625 1.625 1.188 1.188 1.188 1.188 1.625 1.625 1.188 1.875 1.188 1.875 1.188 1.406 1.188 1.406 1.406 1.406 0.8750 2.000 0.7500 2.000 0.7500 0.6250 1.438 0.6250 0.5000 1.438 0.5000 0.3750 1.438 0.3750 0.2500 1.438 0.2500 0.8750 0.710 0.1250 0.7500 0.710 0.7500 0.6250 0.710 0.6250 0.5000 0.710 0.5000 0.3750 0.710 0.3750 0.2500 0.710 0.2500 0.710 0.1250 0.710 0.710 0.710 0.710 0.710 Cable Acceptance Outer Sheath‘E’ i Max Min StandardbodymaterialisFeraloy • 90°anglewithmalethread • Features: e ae102forrelatedaccessories Seepage • AvailablewithNPTthreads • Standardneoprenesealsuitableforuseinoperatingtemperatures • Weatherproofsealonoutersheathofcable • Standardglandnutmaterialissteel • © -25° to40°C 2013 Eaton’sCrouse-Hinds Business ‘F’ (lessentry) Gland Length cULus Listed ® iron alloy Diameter ‘G’ External External 4F 93 4F 2013 Eaton’s Crouse-Hinds Business © cULus Listed cULus -25° to 40°C 0.312 0.437 0.3120.3750.5000.3750.500 0.437 0.500 0.625 0.500 0.625 • electroplate and chromate finish coat Body – steel with zinc • Gland nut – material is aluminum •in operating temperatures Standard neoprene seal suitable for use • Available with NPT threads • See page 102 for related accessories Features: www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright CGB2013 CGB1013 CGB1014 CGB1015 CGB2014 CGB2015 " " " " " " 4 2 2 2 4 4 / / / / / / 3 1 1 1 3 3 Entry Thread Size ‘A’Entry Thread Outer Sheath ‘E’

NPT Size NPT Catalog # Min Max

installed in accordance with NEC501.10(B)(2) installed in accordance All dimensions in inches unless otherwise noted. SELECTION TABLE Gland Type: Portable cord connector Cable Type: cable Non-armoured and tray Compliances: Certifications and •File E23223 cULus Listed - UL • Class I, Div. 2 hazardous locations when Suitable for use in North American Standards - Standards American North General Purpose CGB1013 4F 94 SELECTION TABLE SuitableforuseinClassI,Div.2hazardouslocationswhen • Certifications andCompliances: Non-armoured andtraycable Cable Type: Non-armoured Gland Type: All dimensionsininchesunlessotherwisenoted. P ieNPTCatalog# NPT Size installed inaccordancewithNEC501.10(B)(2) 4F Entry Thread Size‘A’ 3 1 2 1 1 1 2 3 3 3 3 1 1 1 1 4" 4" 1" 1" 1" 3" 2" 2" 3" / / / / / / / 1 1 1 1 1 1 1 1 4 4 4 2 2 2 2 / / / / / / / / 2 2 2 2 2 2 4 4 " " " " " " " " " " " " " " " www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright CGFP1027 CGFP1023 CGFP927 CGFP923 CGFP7920 CGFP7917 CGFP5911 CGFP599 CGFP4911 CGFP499 CGFP3239 CGFP397 CGFP396 CGFP2239 CGFP297 CGFP296 CGFP195 CGFP194 CGFP193 CGFP192 CGFP8917 CGFP6913 CGFP6915 CGFP8920 General Purpose North American Standards- CGFP Form .2 .00350 .5 5.500 4.250 3.5000 3.0000 1.625 G .2 .00300 .5 5.500 4.250 3.0000 2.5000 1.625 G .6 .00350 .5 5.500 5.500 4.250 4.250 3.5000 3.0000 3.0000 2.5000 1.563 1.563 G G .3 .70100 .5 1.781 1.781 1.781 1.750 1.750 1.750 1.0000 0.8750 0.8750 0.7500 0.7500 0.6250 0.938 0.938 0.938 C C C .5 .70100 .5 1.781 1.781 1.781 1.750 1.750 1.750 1.0000 0.8750 0.8750 0.7500 0.7500 0.6250 0.750 0.750 0.750 C C C .3 .80135 .7 2.250 2.250 2.250 2.250 2.375 2.375 2.375 2.375 1.3750 1.1880 1.1880 1.3750 1.0000 1.1880 1.1880 1.0000 0.938 0.938 0.938 0.938 D D D D .5 .00065 .7 1.281 1.281 1.281 1.375 1.375 1.375 0.6250 0.5000 0.5000 0.3750 0.3750 0.2500 0.750 0.750 0.750 0.750 B B B B .0 .70165 .5 3.250 3.250 1.6250 1.3750 1.000 E .0 .20185 .5 3.250 3.250 1.8750 1.6250 1.000 E .3 .80250 .5 3.875 3.875 3.250 3.250 2.5000 2.1880 2.1880 1.8750 1.438 1.438 F F .0 .70218 .5 3.875 3.250 2.1880 1.8750 1.500 F .0 .80250 .5 3.875 3.250 2.5000 2.1880 1.500 F Thread Length ‘B’ NPT Cable Acceptance Outer Sheath‘E’ .200.2500 0.1250 i Max Min e ae102forrelatedaccessories Seepage • AvailablewithNPTthreads • Standardneoprenesealsuitableforuseinoperatingtemperatures • Weatherproofsealonoutersheathofcable • FormD-GstandardbodyandglandnutareFeraloy • FormB-Cstandardbodyandglandnutareturnedsteel • Features: © -25° to40°C 2013 Eaton’sCrouse-Hinds Business ‘F’ (lessentry) Gland Length .7 1.281 1.375 Diameter ‘G’ External External ® iron alloy 4F 95 4F 2013 Eaton’s Crouse-Hinds Business 10N 11N 12N 13N © " " " 8 2 4 / / / 1" 3 1 3 Size Catalog # -25° to 40°C POLYAMIDE LOCK NUT POLYAMIDE SELECTION TABLE NCGB Features: • Standard material is thermoplastic polyester • Tightens by hand to create a watertight seal • Gasket on entry threads included • Compact design allows close grouping of connectors • Available with NPT threads NCG Features: • Standard material is polyamide 6 • Weatherproof seal on outer sheath of cable •in operating temperatures Standard neoprene seal suitable for use • Available with NPT threads cULus Listed cULus NEMA 3, 4X (NCGB only) 'G' External Diameter 'F' 0.35 0.75 0.100.20 0.35 0.50 0.55 1.00 (Less Entry) Gland Length www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Cable Range 'E' Acceptance Min Max 0.89 1.03 3.19 2.02 0.76 0.91 3.19 2.02 0.540.64 0.68 0.78 2.52 2.52 1.58 1.58 0.250.40 0.42 0.57 2.25 2.25 1.33 1.33 NCG75 75 NCG38 35 NCG50 50 NCG100 100 Entry Thread Size ‘A’Entry Thread Outer Sheath ‘E’ " " " 4 8 2 / / / 1" NCGB3236 NCGB3235 NPT Catalog # NCGB2233 NCGB2234 NCGB1231 NCGB1232 3 3 1 NPT Size NPT Catalog # Min Max " " " " 4 4 2 2 / / / / 1" 1" 3 3 1 1 Size NPT All dimensions in inches unless otherwise noted. SELECTION TABLE All dimensions in inches unless otherwise noted. SELECTION TABLE Cable Type: Non-armoured and tray cable Gland Type: Non-armoured Certifications and Compliances: • cULus Listed - UL File E23223 • NEMA 3, 4X Non-armoured Cable Type: cable Non-armoured and tray Gland Type: •File E23223 cULus Listed - UL Certifications and Compliances: Certifications and North American Standards - Standards American North General Purpose NCG and NCGB NCG 4F A Series–LockNut 96 A Series–SealingWasher A Series–EarthTag "7 11. 42 12.2 41 73 1 1" nr hedABCDCatalog# D C 89 77 67 13.5 42 54 B 13.5 28.6 34 13.5 All dimensionsinmillimetersunlessotherwise noted. 12.2 Catalog# 13.5 73 67 10.5 24.5 58 7 A 44.5 41 137.5 D 6.75 125.5 36 111.5 33 3 86.5 1 73 C 30 61.5 Entry Thread 53.8 48.75 B M75 M63 M50 M40 A M32 M25 M20 M16 Entry Thread "1556 3577 13.5 67 125.5 2 2" 1 9 110 130 12 95 8 80 6.4 65 6.4 46 4.7 * Forstainlesssteelreplacelastdigitwith"9". 36 4.5 30 M110 4.5 24 M90 4 19 M75 4 M63 3 M50 M40 Catalog# M32 M25 B M20 A M16 Entry Thread METRIC SELECTIONTABLE – – 63 50 40 32 25 20 16 12 10 Size Metric / / 4 2 1 1 1 METRIC SELECTIONTABLE 34 2242 34 12.2 10.5 41 36 73 61.5 " " / / / 2 2 4 4F 4F 3. 31. 89 67 13.5 54 13.5 13.5 73 58 44.5 137.5 111.5 86.5 " " " – – CAP226349 CAP225049 CAP224049 CAP223249 CAP222549 CAP222049 CAP221649 CAP221249 CAP221049 Catalog # Metric www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Accessories – A Series 702.0 –– 1.5 –– 1.5 77.0 1.5 63.0 1.5 52.0 1.2 42.0 1.2 30.0 1.2 24.0 1.2 22.0 18.0 15.0 ‘D’ Diam. Metric METRIC SELECTIONTABLE NPT SELECTIONTABLE CAP221104 CAP229094 CAP227594 CAP226394 CAP225094 CAP224094 CAP223294 CAP222594 CAP222094 CAP221694 – Standard materialisnickel-platedbrass – Standard materialisnickel-platedbrass ‘E’ Thickness Metric – Standard materialisneoprene "1 105 10 3" "47 40 4.75 1" nr hedABCatalog# B 3 A 1 Entry Thread NPT SELECTIONTABLE "62 70 6.25 2" 1 1 2 / / 3 1 3 1 Size NPT 3 3" 2 2" 1 1 1" / / / / 1 1 1 4 2 4 2 8 4 / / / 1 1 1 1 .525.4 3.75 "433" " " " " / / / / NPT SELECTIONTABLE 2 2 4 2 2 2 4 .555.9 5.75 50 5.25 "990" " " " " " Catalog # NPT CAP229312 CAP229300 CAP229212 CAP229020 CAP229112 CAP229114 CAP229010 CAP229034 CAP229012 CAP229038 CAP229014 CAP567104 CAP567084 CAP567064 CAP567194 CAP567154 CAP567134 CAP567174 CAP567194 CAP567184 CAP567154 CAP567124 CAP567094 CAP567074 CAP567054 CAP567034 © ‘D’ Diam. NPT 2. 2.0 2.0 120.0 2.0 104.0 2.0 85.0 1.5 71.0 1.5 57.0 52.0 101.5 1.5 41.0 1.5 33.0 1.5 27.0 1.5 22.0 20.0 2013 Eaton’sCrouse-Hinds Business CAP280184 CAP280134 CAP280194 CAP280164 CAP280154 CAP280144 CAP280124 CAP280174 ‘E’ Thickness NPT 4F 97 4F CAP506040 CAP506050 CAP506060 CAP506070 CAP506080 CAP506090 CAP506100 CAP506110 CAP506120 CAP506130 CAP506140 CAP506150 CAP506160 2013 Eaton’s Crouse-Hinds Business © SELECTION TABLE Gland Size4 5 6 7 8 9 10 11 Catalog # 12 13 14 15 16 A-Series – Shroud material is PVC – Standard CAP810934 CAP811034 CAP811134 CAP811234 CAP811334 CAP811434 CAP811534 CAP811634 CAP810734 CAP810834 CAP810534 CAP810634 CAP810434 CAP560830 CAP560930 CAP561030 CAP561130 CAP561230 CAP561330 CAP561430 CAP561530 CAP561630 CAP560530 CAP560630 CAP560730 CAP280099 CAP280759 CAP280639 CAP280509 CAP280409 CAP280329 CAP280259 CAP280029 CAP280069 Cable Diameter Catalog # – Standard material is brass – Standard www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright SELECTION TABLE SELECTION TABLE METRIC SELECTION TABLE Lead Sheath Sealing Range Min Max

90 123 75 112 63 100 50 80.5 40 64.5 32 49.5 25 39.5 20 32.5 Metric Size16 External Diameter # Catalog 25.5 27-4133-4840-5647-6554-74 1063-83 1172-93 12 13 14 55 15 64 16 72 85 95 110 59 120 69 78 9.5 92 12 103 118 12 128 16 16 18 18 16-27.521-34 8 9 41 48 45 52 8 9.5 8.5-1612-21 6 7 24 30 27.5 33.5 6 8 6-11 5 19 22 5 Cable Range Gland Size4-8.5 Flats Across Width Thickness Catalog # 4 15 18 5 91011121314 16 2115 2816 33 40 46.5 54 26.5 32.5 63 39.5 46.5 54.5 61 31 72.5 38.3 81.5 45.3 52.8 60.8 71 80.5 89.5 678 6 9 12 11 15 20 13.9 18.3 23.8 All dimensions in millimeters unless otherwise noted. Gland Size 5 4 7.5 10 A Series – Clamping Module and washers nickel-plated brass body with stainless steel screws materials are – Standard A Series – Earthing Washer A Series – Serrated Lock Washer A Series – Serrated material is stainless steel – Standard Accessories – A Series A – Accessories 4F 98 A Series–AdaptorsandReducers M110 aeM2M6M0M5M2M0M0M3M5M0M0 M110 M100 M90 M75 M63 M50 M40 M32 M25 M20 M16 M12 Male Male aeM2M6M0M5M2M0M0M3M5M0M0M110 M90 M80 M75 M63 M50 M40 M32 M25 M20 M16 M12 Male * Forstainlesssteelreplacelastdigitwith"9". Male M90 M75 M63 M50 744964 M40 744704 744214 M32 744204 M25 M20 M16 M12 3 2 1 1 M110 3 2 1 1 3 1 3 1 4" 3" 2" 1" M90 M75 M63 M50 M40 M32 745834 M25 M20 M16 M12 3 1 3 1 / / / / 1 1 1 1 4" 3" 2" 1" / / / / 1 1 1 1 / / / / 4 2 8 4 4F / / / / 4 2 8 4 2 2 2 4 " " " " 2 4 " " " " 2 2 " " " " " " " " 744104 Female Female 494709 444740714 740454 740904 740194 740894 740914 740624 740884 740614 1 Female / 745574 4 " Female www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 745844 1 / 4 " → 414744694 744194 → → 3 / → Accessories – A Series 8 " 424706 474740984 740724 740464 740204 745594 740024 404740294 740034 745334 3 / 8 " 474748 424745504 745244 744984 745234 744724 744974 744714 METRIC xNPTSELECTIONTABLE 1 / 2 " 444703 494716 741524 741264 740994 740734 740474 744884 744624 484745154 744894 434740564 740304 740274 1 / 494755 454745774 745514 745254 744994 2 " 3 / 4 "1"1 METRIC xSELECTIONTABLE NPT xMETRICSELECTIONTABLE 474710 424713 741794 741534 741274 741004 740744 414745424 745164 745134 424752 474746044 745784 745524 745264 454740834 740574 740544 3 / NPT xSELECTIONTABLE 4 "1"1 414718 454710 742064 741804 741544 741284 741104 – Standard materialisnickel-platedbrass 444745694 745434 745404 484741104 740844 740814 ATEX ExeExdwithLCIE98ATEX 00010 1 / 4 "1 474765 746314 746054 745794 474745964 745704 745674 1 / 2 414741374 741114 741084 "2"2 1 / 4 "1 404762 746584 746324 746064 © 2013 Eaton’sCrouse-Hinds Business 454741814 741554 745944 434741644 741384 741354 1 / 2 "2"2 1 / 2 "3"3 741824 424746504 746244 746234 746214 741624 744304 746484 745864 741894 1 / 1 2 / "3"3 2 " 745394 Size notavailable Size available–nopartnumber 1 / 2 "4" 4F 99 4F 2013 Eaton’s Crouse-Hinds Business © Thread Length Thread ‘E’ Thread Thread Length ‘E’ certified Ex e II with LCIE 97ATEX6007X – 6; ATEX material is polyamide Standard Hex Thickness ‘B’ Hex Thickness ‘B’ ATEX Exe Exd with LCIE 98 ATEX 00010 Exe Exd with LCIE 98 ATEX ATEX – Standard material is nickel-plated brass; – Standard www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 14 2.8 15 Across Flats Across ‘A’ 18 3.0 15 23 3.0 15 28 3.5 15 36 4.0 15 44 4.0 15 54 5.0 16 67 5.5 17 80 6.0 18 85 7.0 20 95 8.0 22 110 10.0 22 6490 5.5 6.0 20 30 445075110 4.0 5.0 6.0 10.0 20 20 28 32 36 3.5 20 14182228 2.8 2.8 3.0 3.0 12 12 16 16 Across Across Flats ‘A’ 15 4 15 1923 4 4 15 15 28 5 15 36 5.5 15 44 5.5 15 54 6 16 67 6.5 17 NPT SELECTION TABLE METRIC SELECTION TABLE METRIC SELECTION POLYAMIDE SELECTION TABLE POLYAMIDE CAP190124 Metric Catalog #* CAP190164 CAP190204 CAP190254 CAP190324 CAP190404 CAP190504 CAP190634 CAP190754 CAP190804 CAP199904 CAP191004 CAP190894 CAP191094 CAP190594 CAP190694 CAP190794 CAP190994 CAP191194 CAP190194 CAP109294 CAP190394 CAP190494 Metric Catalog #* CAP191127 CAP191167 CAP191207 CAP191257 CAP191327 CAP191407 CAP191507 CAP191637 " " " " 4 2 2 2 " " " " / / / / 1 1 1 1 4 8 2 4 / / / / 2 3 1 1 2" 3" 1" All dimensions in millimeters unless otherwise noted. *For stainless steel replace last digit with "9". * For stainless steel replace last digit with "9". NPT Size NPT Catalog #*1 3 Flats ‘A’ Across 1 Hex Thickness ‘B’3 Length ‘E’ Thread Metric Size 12 16 20 25 32 40 50 63 75 80 90 100 Metric Size 12 16 20 25 32 40 50 63 *For stainless steel replace last digit with "9". A Series – Stopping Plug A Series – Stopping Accessories – A Series A – Accessories A Series – Nonmetallic Stopping Plug A Series – Nonmetallic Stopping Washer and locknut are required for non-threaded holes (not included) see page 96 4F 100 B Series–EarthTag B Series–LockNut B Series–Shroud All dimensionsinmillimetersunlessotherwise noted. B Series–SealingWasher L114 (90,100) L104 (80,85) L90 (75,75s) L80 (63,63s) L65 (50,50s) L55 (40) Catalog# L46 (32) L38 (25) L30 (20) L24 (16,20s) Size (GlandSize) M100 M90 M85 M80 M75 M63 M50 M40 M32 Catalog# M25 M20 M16 Metric EntryThread M100 M90 M85 M80 M75 M63 M50 M40 M32 Catalog# M25 M20 M16 Metric EntryThread M100 M90 M85 M80 M75 M63 M50 M40 M32 Catalog# M25 M20 M16 Metric EntryThread 4F METRIC SELECTIONTABLE METRIC SELECTIONTABLE METRIC SELECTIONTABLE PVC SELECTIONTABLE www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Accessories –BSeries PVC-L114 PVC-L104 PVC-L90 PVC-L80 PVC-L65 PVC-L55 PVC-L46 PVC-L38 PVC-L30 PVC-L24 BET/M100 BET/M90 BET/M85 BET/M80 BET/M75 BET/M63 BET/M50 BET/M40 BET/M32 BET/M25 BET/M20 BET/M16 BLN/M100 BLN/M90 BLN/M85 BLN/M80 BLN/M75 BLN/M63 BLN/M50 BLN/M40 BLN/M32 BLN/M25 BLN/M20 BLN/M16 RNSW/M100 RNSW/M90 RNSW/M85 RNSW/M80 RNSW/M75 RNSW/M63 RNSW/M50 RNSW/M40 RNSW/M32 RNSW/M25 RNSW/M20 RNSW/M16 – – Standard materialisbrass Standard materialisbrass – Standard materialisnylon L104 (80,85) Catalog# L90 (75,75s) L80 (63,63s) L65 (50,50s) L55 (40) L46 (32) L38 (25) L30 (20) L24 (16,20s) Size P nr hedCatalog# 3 1 NPT EntryThread 4" 3 3" 2 2" 1 1 1" 4" 3 3" 2 2" 1 1 1" P nr hedCatalog# 3 1 NPT EntryThread 4" 3 3" 2 2" 1 1 1" P nr hedCatalog# 3 1 NPT EntryThread / / / / / / 4 2 4 2 4 2 1 1 1 1 1 1 1 1 1 1 1 1 " " " " / / / / / / / / " " / / / / 2 2 2 4 2 2 2 4 2 2 2 4 " " " " " " " " " " " " PCP SELECTIONTABLE NPT SELECTIONTABLE NPT SELECTIONTABLE NPT SELECTIONTABLE © 2013 Eaton’sCrouse-Hinds Business PCP-L104 PCP-L90 PCP-L80 PCP-L65 PCP-L55 PCP-L46 PCP-L38 PCP-L30 PCP-L24 RNSW/400NPT RNSW/350NPT RNSW/300NPT RNSW/250NPT RNSW/200NPT RNSW/150NPT RNSW/125NPT RNSW/100NPT RNSW/075NPT RNSW/050NPT BET/400NPT BET/350NPT BET/300NPT BET/250NPT BET/200NPT BET/150NPT BET/125NPT BET/100NPT BET/075NPT BET/050NPT BLN/400NPT BLN/350NPT BLN/300NPT BLN/250NPT BLN/200NPT BLN/150NPT BLN/125NPT BLN/100NPT BLN/075NPT BLN/050NPT PVC PCP 4F

4F 101 2013 Eaton’s Crouse-Hinds Business © GHG 960 1946 R0071 GHG 960 1946 R0072 GHG 960 1946 R0056 GHG 960 1946 R0074 GHG 960 1946 R0059 GHG 960 1946 R0077 GHG 960 1946 R0062 GHG 960 1946 R0080 GHG 960 1946 R0065 GHG 960 1946 R0083 GHG 960 1952 R0111 GHG 960 1952 R0112 GHG 960 1952 R0113 GHG 960 1952 R0114 GHG 960 1952 R0115 GHG 960 1952 R0116 GHG 960 1952 R0117 Across Flats Catalog # GHG 960 1941 R0031 GHG 960 1941 R0032 GHG 960 1941 R0033 GHG 960 1941 R0034 GHG 960 1941 R0035 GHG 960 1941 R0036 GHG 960 1941 R0037 GHG 960 1941 R0038 GHG 960 1944 R0101 GHG 960 1944 R0102 GHG 960 1944 R0103 GHG 960 1944 R0104 GHG 960 1944 R0105 GHG 960 1944 R0106 GHG 960 1944 R0107 GHG 960 1944 R0108 – Standard material is polyamide – Standard Standard material is polyamide Standard – For sealing unused cable glands; www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright – Standard material is polyamide – Standard SELECTION TABLE SELECTION TABLE SELECTION TABLE SELECTION TABLE – Standard material is polyamide – Standard Thread 1Thread 2 Thread 20 x 1.5 Length 125 x 1.5 M16 x 1.5 Length 2 12.0032 x 1.5 M20 x 1.5 Length 3 14.0032 x 1.5 M20 x 1.5 16.00 8.0040 x 1.5 M25 x 1.5 8.00 16.0040 x 1.5 M25 x 1.5 10.00 16.0050 x 1.5 M32 x 1.5 8.00 10.00 16.0050 x 1.5 M32 x 1.5 8.00 10.00 18.00 6.0063 x 1.5 M40 x 1.5 10.00 18.00 24.00 10.0063 x 1.5 M40 x 1.5 29.00 12.00 18.00 8.00 M50 x 1.5 36.00 12.00 18.00 10.00 36.00 12.00 10.00 46.00 12.00 10.00 46.00 10.00 55.00 12.00 68.00 68.00 68.00 Metric Entry DiameterM12 x 1.5M16 x 1.5M20 x 1.5 WidthM25 x 1.5M32 x 1.5 ThicknessM40 x 1.5M50 x 1.5 Catalog # M63 x 1.5 17.00 22.00 26.00 5.00 32.00 5.00 41.00 6.00 50.00 6.00 60.00 7.00 75.00 7.00 8.00 8.00 16202532405063 7.00 8.50 11.00 14.00 20.00 26.00 34.00 33.00 34.50 36.00 39.50 42.00 44.00 45.00 All dimensions in millimeters unless otherwise noted. Thread 1Thread 12 Diameter Length 1 6.00 Catalog # 30.30 Thread 1Thread 16 x 1.5 Diameter 21.50 Length 1 Length 2 4.00 Catalog # 12.00 20 x 1.525 x 1.532 x 1.5 25.5040 x 1.5 30.5050 x 1.5 37.5063 x 1.5 45.50 55.50 4.00 85.00 4.00 5.50 5.50 5.50 13.00 6.50 13.00 15.00 15.00 16.00 16.00 D Series – Lock Nut D Series – Lock Accessories – D Series – D Accessories D Series – Reducing Ring D Series – Screw Plug D Series – Screw D Series – Blanking Plug 4F 102 E Series–Chico E Series–Wire MeshGrip E Series–TSCEpoxySealingCompound E Series–ColdShrink Cold Shrink is aregisteredtrademarkofthe3M Company. gland bysimplycuttingitoff.Seeordering informationforcompleteofferingofTMC-KColdShrinkkits for corrosionprotecti gland withouttheuseofaheatsource toshrinkthematerialtightlyoverseal.TheColdShrink canberemovedea the gland.TheColdShrinkmaterial ismadeofEPDMrubberthatcontainsnochloridesorsulfurs.Theprotection kitinstallse against corrosiveelementslikesaltsprayandmoisture.TheTMC-Kkit ismadeofaColdShrinkmaterialthatquickandeasy 50ml. 20ml. 10ml. Catalog # Size(ml.) 5 10 10 Std. CartonQty. .2 o185NUT913 NUT913 NUT98 NUT98 NUT98 NUT95 1.625 to1.875 NUT98 1.375 to1.625 NUT98 NUT95 1.188 to1.375 NUT95 1.000 to1.188 NUT95 .875 to1.000 NUT94 .875 to1.000 NUT94 .875 to1.000 .875 to1.000 .750 to.875 .625 to.750 Wire MeshGripCatalog# .500 to.625 .500 to.625 GlandNut .375 to.500 Cord RangeDiameter t.Cro t.Tb ieCatalog# Tube Size Std. CartonQty. 4.0oz. 1.0oz. 0.5oz. 5 10 10 nr hedCatalog# All dimensionsininchesunlessotherwisenoted. 3 1 Entry Thread 4" 3 3" 2 2" 1 1 1" / / 4 2 1 1 1 1 " " / / / / 2 2 2 4 4F " " " " www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright ™ Corrosion ProtectionKitsarespeciallydesignedforEaton'sCrouse-Hinds TMC,TMCX,andTECKfittingstoprovideprotection Accessories –ESeries SELECTION TABLE SELECTION TABLE SELECTION TABLE SELECTION TABLE ® LiquidSeal ™ Kit 17317N RPE433-123 RPE433-122 RPE421-121 16676N RPE421-120 16676N 16676N RPE421-119 RPE417-117 RPE417-129 RPE417-116 RPE417-115 TMC-K10 TMC-K8 TMC-K6 TMC-K9 TMC-K7 TMC-K5 TMC-K4 TMC-K3 TMC-K2 TMC-K1 TSC4 TSC1 TSC05 LSC 50 LSC 20 LSC 10 © 2013 Eaton’sCrouse-Hinds Business on. ColdShrink asily overthe sily fromthe toinstallon 4F 103 4F 2013 Eaton’s Crouse-Hinds Business © GHG 960 1927 R0105 DPE4005S3 DPE3005S3 DPE1005S3 DPE4004S3 DPE3004S3 DPE1004S3 DPE1029S3 DPE3029S3 DPE1030S3 DPE3030S3 SIRA 99 ATEX 3050 U Ex 1126 Exe II SIRA 99 ATEX – Standard material is glass-filled polyamide; material is glass-filled – Standard www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright SELECTION TABLE SELECTION TABLE SELECTION TABLE GHG 960 1954 R0002 – SIRA 99 ATEX 3050 U – SIRA 99 ATEX II (Stainless steel & brass only) I M2 II, 2GD, EExe I & only) II 2GD, EExe II (Nylon type 4X IP66 Enclosure – Standard material is polyamide; PTB01 ATEX 1128X Ex 1126 Exe II PTB01 ATEX material is polyamide; – Standard ” Stainless Steel ””” Brass Stainless Steel Brass 4 2 2 4 / / / / M25 Nylon M25 Stainless Steel M25 Brass M20 Nylon M20 Stainless Steel Thread 1Thread M25 x 1.5 All dimensions in millimeters unless otherwise noted. # Catalog Thread 1Thread M25 x 1.5 Diameter 30.00 Length 1 19.00 Length 2 Catalog # 4.50 1 1 3 3 Entry ThreadM20 Material Brass Catalog # Please refer to section 6F for additional breather and drain options. Please refer to section 6F for additional breather Breathing and Drainage Plug Breathing Drainage Plug Breather Drain Breather Accessories – Breathers & Drains – Breathers Accessories 4F 104 Facilitatethesafeexitofcablesfromtray–insureprotection • Canbeusedindoorsoroutdoors,wherevercabletraysystemsare • Providestrongmechanicalsupportforexitconduitsandcables • Provideameanstofirmlybondexitconduitcabletrayforbest • Provideameansofclampingmetalconduit(rigidsteelor • LCC/LCCF cabletrayconduitclamps: flanges. outside flanges;LCCFclampsareforuseexclusivelyoninside side railswithinsideflanges(requiringtraymounting)and LCC cabletrayconduitclampsareusedforinstallationon Applications: Accommodates • Adjustablehookassurespositivegriponinsiderail • Outsidemountingfacilitatesinsiderailinstallation • LCCF features: • Conduit SizeRanges: Vinyl–natural • Steel–zincelectroplate • Castiron–electrogalvanizedandaluminumacrylicpaint • Standard Finishes: Hookcap–vinyl • Setscrewsandclampingnut–steel • Hook–steel • Body–castiron • Standard Materials: ULStandard:467(GroundingandBondingEquipment) • Certifications andCompliances: Accommodateswiderangeofconduitsizes– • Designaccommodatesallpopulartypesofcabletray • Compactdesignhaslowprofile–minimumtrayspacerequiredfor • Knurledbodyhasno-slipsurfaceforconduitandtray–positive • Malleableironbodyprovidesgreatstrength • Clampsconduitatanyanglewithrelationtotray–facilitateswire • Providessuperiorgroundcontinuitybetweenconduitandcable • Nodrillingorweldingnecessaryforinstallation • Swivelhookclearsconduit.Nodisassemblyrequiredfor • Quickandeasyinstallation–lowinstalledcost.Merelytighten • Features: cables fromdamage installed grounding continuity power and/orcontrolcablesfromtray aluminum, IMCandEMT)tocabletrayprovidefortheexitof 1 assembly grip assured pulling, minimizesconduitbending tray installation clamp nutand/orsetscrew(s) / 2 4F " to4" www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 3 / 4 " through1 Conduit Clamps LCC SeriesCable Tray 3 / 4 " wideflange 1 / 2 " through4" 4 3 3 2 2 1 1 1 1 In Inches: Dimensions 3 odi ieababc b a b a Conduit Size LCC / / odi ieCt a.# Cat. # Cat. 3 1 Conduit Size Ordering Information 2 1 1 4 3 2 1 3 / / 4 2 1 1 1 1 4 2 / / / / © 1 1 1 1 o s ihotieri ryForusewithinsiderailtray For usewithoutsiderailtray / / / / 2 2 2 4 2 4 2 2 2013 Eaton’sCrouse-Hinds Business C LCCF LCC 7 6 5 3 7 5 4 41 3 3 C LCCF LCC 13 5 13 13 5 13 9 7 3 / / / / / 16 16 16 16 16 / / / / 16 16 16 16 C5LCCF5 LCCF4 LCCF2 LCCF1 LCC5 LCC4 LCC2 LCC1 C9LCCF9 LCCF7 LCC9 LCC7 C6LCCF6 LCCF3 LCC6 LCC3 C00LCCF010 LCCF8 LCC010 LCC8 3 3 3 2 2 2 1 1 1 3 3 3 11 11 11 11 11 11 11 / / / 4 4 4 / / / / / / / 16 16 16 16 16 16 16 LCCF 7 7 6 5 5 4 3 3 3 3 3 1 3 3 1 3 15 19 11 1 / / / / / / / 4 4 4 4 4 4 8 / / / 16 32 32 3 3 3 2 2 2 1 1 1 1 11 11 11 3 3 3 5 5 5 5 / / / / / / / 4 4 4 8 8 8 8 / / / 16 16 16 2 2 2 1 1 1 1 1 1 1 3 3 3 11 11 11 11 11 11 11 / / / 16 16 16 / / / / / / / 16 16 16 32 32 32 32 4F 105 4F inside or outside flanges 2013 Eaton’s Crouse-Hinds Business © TGC Clamp installs on cable trays with TGC40 0 / 2 Ground Wire Size Wire Ground #6 to Cat. # Dimensions In Inches: Ordering Information Ordering www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 0 / 2 electrogalvanized Bonding Equipment) and another set screw securely attaches the grounding conductor to the clamp – outstanding pull-out and vibration resistance types of cable tray inspected strength 318-7 for grounding and bonding installed cost. No drilling or special tools required. stranded aluminum or copper grounding conductors in sizes from #6 to attaching a grounding conductor to attaching a grounding conductor cable tray to maintain grounding cable tray continuity for the entire system for carrying through a reliable method ground fault currents requirements most types of cable trays with inside or outside flanges Standard Finishes: Standard • Malleable iron and steel – • UL Standard: 467 (Grounding and Materials: Standard • Body – malleable iron • Set screws – steel Certifications and Compliances: • Set screw bonds the clamp to the tray • Design accommodates most popular • Mechanical device – can be easily • Malleable iron body provides high Features: • Meets requirements of NEC Code Article • Quick and easy installation – low • Accommodates solid (where suitable) or Applications: clamps Cable tray grounding conductor heavy industrial are designed for use in applications: • for securely To provide a means • of equipment To provide protection • Code To meet UL and NEC • For installation indoors or outdoors, with TGC Cable Tray Ground Conductor Clamp Conductor Ground Tray Cable TGC 4F Plugsareusedtofill unusedopeningsinsealingblockassemblies; • Reducerspermitsealingblockassembliestoacceptcables with • Eachsealingblockassemblysealsmultiplecables/conduits; • Sealingblockopeningswillaccommodateundersizeand • Assembliesareofferedforallcable/conduitoutsidediameters • Caststopsonfrontpressureplatepreventsealingblock assembly • InterchangeablesealingblockassembliesfitallTHRU-WALL • Speciallyformulatedelastomericmaterialbetweencastmalleable • Sealing blockassembly Framescanbeinstalledinwallsuchthatsealingblockassemblies • Castkeywaysinmountingframealignandpositionsealingblock • Availableinsizestoaccommodateawiderangeofcabletray • Retrofitframeallowsforeasyinstallationofwhere • One-piececastmalleableironorsteelmountingframecanbe • Mounting frame Highdegreeofflexibilitywithinterchangeablesealingblock • Easyandfastinstallation,usingfactoryassembledcomponents • Fewpartsrequiredtosealawiderangeofdiameterscablesor • System Features: 106 Tobeusedindoorsoroutdoors,innewconstructionexisting • Forusewithmosttypesofpower,instrumentandcontrolcables • Toprovideasealforcable/conduitpenetrationsthroughmasonry, • air. THRU-WALLBARRIERisdesigned: BARRIER alsorestrictswateranddustwillhelpcontaintreated fire-rated walls,ceilings,floors,bulkheadsordecks,THRU-WALL or non-fire-ratedwalls,ceilings,floors,bulkheadsdecks.Fornon- wherever thereisaneedtosealcablesorconduitspenetratingfire- THRU-WALL BARRIERcable/conduitsealingdeviceisused Applications: frames, providingforfutureexpansion blank sealingblockassembliesfill unused spacesinmounting smaller O.D.thanthespecifiedrange compact designpermitsclosenestingofcables,savingspace out-of-round cable Hinds less than.250"canbeaccommodated–consultEaton'sCrouse- from .250"to4.500"(6.4mm114.3mm);cableswithdiameters from slippingthroughmountingframeduringinstallation BARRIER mountingframes insulation expands duringfiretosealanyvoidsleftbyburnedcable provides highpull-outresistanceandpositivecableseparation; iron pressureplatesprotectscablefrommechanicaldamage; can beinsertedineitherhorizontalorverticalposition assemblies power orinstrumentapplications and loadings,includingsinglemultiplelayersofcablesfor cables/conduit arealreadyinstalled surfaces orweldedintosteelbulkheadsatanytime into concreteduringwallconstruction,groutedinmasonry assemblies andaselectionofdifferentsizesframes conduits structures as wellconduits cable/conduit penetrationsintocleanareas concrete orsteel;torestricttheentranceofcontaminantsthrough 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Cable/Conduit SealingDevice TW Series THRU-WALL BARRIER NAVSEAApproval–ElectricPlantInstallationStandardMethods • USCGAcceptance–consultEaton'sCrouse-Hinds • ULClassificationperStandard1479 • NFPA251 • ASTMStandardE-119 • Certifications andCompliances: Specialelastomericmaterial–natural • Steel–aluminizedweldablepaint • Malleableironandhardware–electrogalvanized • Standard Finishes: Clampinghardware–steel • Sealingmaterial–specialelastomeric • Pressureplate–castmalleableiron • Mountingframe: • Standard Materials: Easy three stepinstallation 1. Cast,grout orweld the one- © sealing blocksintokeywaysin nuts onclampinghardware to No. S9300-AW-EDG-010/EPISM–TWFS/TWBSassemblies ® mounting frame,andtighten piece mountingframeinto ASTM A27Grade60-30 TWFS –castcarbonsteel, TWF, TWFR–castmalleableiron 2013 Eaton’sCrouse-Hinds Business masonry orsteelsurface. 3. Positioncables/conduit, insert factoryassembled effect theseal. 2. Feedcables/conduit through theframe. 4F 107 4F 2 5 TWFS10 Cast Steel Frame Cat. # TWB2063 4 3 50 range exceeds the number of openings in seal from one to eleven cables seal from shown in adjacent column to the left (in direction of 2013 Eaton’s Crouse-Hinds Business TWF10 4 3 Depending on opening size range, a Depending on opening standard sealing block assembly will standard . © Retrofit Frame Cat. # 3 3 TWF6 TWF6 TWFR6 TWF10TWF12† TWFR10 TWFR12† TWFS10 TWF20TWF24 TWFR20 TWFR24 TWFS20 TWF30 TWFR30 TWFS30 3 4 3 5 1.000–1.250 1.250–1.500 1.500–1.750 1.750–2.000 2.000–2.250 2.250–2.500 TWF12 ® No. of Spaces Available6 Frame Cat. # †Includes removable partition. 10 12 20 24 30 Sealing block assemblies are offered for Sealing block assemblies Each assembly use in marine applications. and sealing has the required lubrication Hydrostatic gaskets to meet U.S. Navy Assemblies Pressure Test Requirements. are available for for marine applications (O.D.) cable/conduit outside diameters 3.500" from .250" (6.4 mm) through suffix S to TWB (88.9 mm). To order, add Cat. No. Example: sealing block assembly TWBS4036. 2 6 TWB2063 TWB3054 TWB3045 TWB30355 TWB4036 TWB40366 TWB5027 .750–1.000 2 11 Added* www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2 TWR2 TWR3 TWR4 TWR5 TWR55 TWR6 TWR66 TWR7 .500–.750 6 1 11 Added* 6.4–12.7 12.7–19.1 19.1–25.4 25.4–31.8 31.8–38.1 38.1–44.5 44.5–50.8 50.8–57.2 57.2–63.5 2 11 TWB2111 TWB2062 TWB1111 TWB2112 — .250–.500 In. mm Opening Size Range Frame Spaces Required Sealing Block Assembly Cat. # No. Openings In Block Plug Cat. #Reducer Cat. # § TWP1 TWP3 TWP5 TWP6 TWP7 †For 3.5" - 4" cable/conduit – use TWB7011010 assembly and reduce down using TWR reducers. sealed in .250-.7 *Catalog # TWB1111 and TWB2112 are used between TWB2111 and TWB2062 in cases where the number of cables to be standard assemblies. Use as many of these higher density assemblies as needed, sandwiched between halves of a standard assembly standard assemblies. Use as many of these higher density assemblies as needed, sandwiched between halves of a standard size ranges §TWR reducers match TWB sealing block assemblies shown in column above Cat. No. and reduce openings to accept cable arrow). TWB Sealing Block Assemblies TWB Sealing Block are offered TWB sealing block assemblies diameters (O.D.) for cable/conduit outside mm to 114.3 from .250" to 4.500" (6.4 less than mm). Cables with diameters – consult .250" can be accommodated Each assembly Eaton's Crouse-Hinds. a .250" opening will accommodate clamping (6.4 mm) O.D. range. When elastomeric hardware is tightened, the around material is uniformly compressed completely tight fit. all cable/conduits for a TWF(S) mounting frames may be installed either horizontally or vertically. TWFR retrofit frames are used wherever cables/conduits are already installed through a fire- or non- fire-rated wall, floor or ceiling. They are designed with a removable section to permit installation around cables/conduits. TWFR retrofit frames can be grouted into walls, floors, or ceilings, or welded into steel bulkheads or decks. TWFR retrofit frames will perform in the same manner as the one- piece TWF(S) frames. TWFS steel mounting frames are welded directly into steel bulkheads, decks and prepared sleeves. For marine applications, keeper bars are provided to securely hold TWBS sealing block assemblies in position when installed. Sealing Block Assemblies & Mounting Frames Assemblies Sealing Block Information Ordering TW Series THRU-WALL BARRIER THRU-WALL Series TW Device Sealing Cable/Conduit TWF Mounting Frames 4F 108 assembly. Seetablebelowforclosurekitcatalognumbers. sandwiched betweenthetwocoverstomaintainfireratingof the framewithhardwareprovided.Theinsulatingmaterialprovidedis Closure coverkitsincludetwocoversclampedtooppositesidesof frames installedforfutureexpansionorthosethatareabandoned. TWB closurecoverkitsofferanoptionalmethodtocloseTWF TWB Closure CoverKits frame opening. ‡Use twoTWB600kitstosealoneTWF12orTWFR12 seal oneTWF20,orTWFR20frame. opening ofsamesize.Example:useoneTWB2000 kitto washdown areas.Onekitsealsoneunusedframe watertight sealinmarine/shipboardapplications or *TWB closurecoverkitsarenotdesignedtoprovide a of astandardassembly. It ispossibletoincreasecablefilldensitywithdouble-sidedsealingblockassemblies(TWB1111andTWB2112)sandwichedbetwe Available Spaces No. of 30 24 20 12 10 6 356. 997. 628. 268. 0.–0. 108.0–114.3 101.6–108.0 4.250–4.500 82.6–88.9 3.500–4.250† 76.2–82.6 3.250–3.500 3.000–3.250 69.9–76.2 2.750–3.000 63.5–69.9 2.500–2.750 W7TP W9TP0TWP11 TWP10 TWP9 TWR88 TWR8 TWP8 TWR77 TWP7 W527TB08TB08 W62 W7100TB01 W1TWB3 TWB1 TWB70111 TWB7011010 TWB6029 TWB60288 TWB5028 TWB50277 2 5 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright W21 TWB2062 TWB2112 2 5 Ordering Information Anchors&Lubricant ClosureCoverKits, Reducers, Plugs, Cable/Conduit SealingDevice Cat. # Cover Kit Closure TWB3000 TWB2400 TWB2000 TWB600‡ TWB1000 TWB600‡ TW Series THRU-WALL BARRIER * 6 2 specific sealingblockassemblies. plug catalognumberswhichmatch in sealingblockassemblies.Seetablefor TWP plugswillcloseanyunusedopenings TWP Plugs W9 TWR10 TWR99 W9TWR1010 TWR9 6 2 ceiling orfloorwhengroutinginframes. TWK anchorassembliesareusedtoattachmountingframeswall, TWK Anchors onigTp Cat.# Recessed Flush Mounting Type © ® 2013 Eaton’sCrouse-Hinds Business 1 7 TWR11 1 7 can beusedinasingleopening. block assemblies.Morethanonereducer numbers whichmatchspecificsealing assemblies. Seetableforreducercatalog .250" (6.4mm)insealingblock TWR reducerswillreduceopeningsby TWR Reducers TWK2 TWK1 None 1 Openings Blank –No — — None 3 en halves 4F 8 4 109 12 4F Cables to be Sealed Number of Openings One TWF12 mounting frame Total the frame spaces required for In the example, one TWR66 reducer is required to Example A diagram 2013 Eaton’s Crouse-Hinds Business © Cables to be Sealed Specification requires 50% spare capacity Total spaces Selection: with capacity of 12 spaces. Four TWB1 blank sealing block assemblies to fill unused frame space. (Choice of frame could vary based on future expansion needs and/or specific cable arrangement.) Note: accommodate the cable with 1.960 TWP6 O.D. and one plug is required for the unused opening. Step 4. sealing block assemblies and select appropriate size mounting frame. Factor in spare capacity required for future expansion. Total frame spaces required Specify TWR reducers to accommodate Specify TWR reducers where possible smaller diameter cables not used. and TWP plugs to fill openings spaces required for Step 4. Total the frame assemblies and the specified sealing block frame(s). select an appropriate mounting 6-, 10-, 12-, 20-, Frames are available in Keep future 24- and 30-space sizes. in mind when expansion requirements blank sealing specifying frame. Specify unused mounting block assemblies to fill closure cover kits frame space and TWB to fill unused frames. Step 5. Check specification/order to be sure it includes 1) frames, 2) sealing block assemblies, 3) plugs and 4) reducers. diameter cables where possible and TWP plugs to fill openings not used. (See Example A diagram.) Cable O.D. Number of Openings 50% Sealing Block O.D. Range 2.000–2.250 3 3 — 4 2.000–2.250 3 2 1 4 Totals 66 5 1 8 5 power cables – sizes 24" Cable Qty. 415 2.200 1.960 Group cables by O.D. and rank Bill of materials for Starting with the largest cable Group cables that fall within the Cable Qty. 415 2.000–2.250 1.750–2.000 ® Sealing Block Assy Cat. # O.D. Range TWB40366 TWB40366 Step 1. from largest to smallest. Total Step 5. specification/order should read: (1) TWF12 (2) TWB40366 (4) TWB1 (1) TWR66 (1) TWP6 Specifying & Ordering Ordering Example A: Ordering Cable tray size: ranging from 1.960" to 2.200" O.D. capacity required: Spare Cables specified: Step 2. same sealing block assembly size. Total Step 3. O.D., select the quantity of sealing block assemblies required. Specify TWR reducers to accommodate smaller The selection of components is based on The selection of components cables or the quantity and sizes of the penetrations. conduits going through the sealing block Once these are known, can be selected. assemblies and frames by outside Step 1. Group cables/conduits from the largest diameter (O.D.) and rank to the smallest. that sealing block Step 2. Keeping in mind in one-quarter assemblies are available cables/conduits inch increments, group that fall within the same sealing block assembly O.D. size range. Step 3. Starting with the largest cable/ conduit O.D., select the sealing block assemblies required. All openings in each sealing block assembly must be filled. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright -inch 4 / 1 TWB2112 TWB2062 TWB2062 increments from .250" to 4.500" (6.4 mm increments from .250" to diameters less to 114.3 mm). Cables with – than .250" can be accommodated consult Eaton's Crouse-Hinds. be mixed within a Cable/conduit sizes can sealing block assembly by inserting TWR reducers to accommodate smaller diameters. The use of reducers can decrease the number of sealing block assemblies required. More than one reducer can be used in a single opening. Another way to increase density is to use TWB1111 and TWB2112 sealing block assemblies wherever there is a large number of cables/conduits in sizes ranging from .250" to .750". Selecting and specifying THRU-WALL Selecting and specifying is a simple BARRIER components for the procedure. Primary components consist of TWF THRU-WALL BARRIER sizes and TWB mounting frames in various for cable/conduit sealing block assemblies in outside diameters (O.D.) Shown here is a double-sided sealing is a double-sided Shown here block assembly (TWB2112) sandwiched sealing between halves of a standard block assembly (TWB2062). Additional double-sided sealing block assemblies may be used to accommodate larger quantities of cables or conduits. Unused sealing block openings must be closed with TWP plugs. Blank sealing block assemblies TWB1 and TWB3 are used to fill each unused space in the mounting frame and permit future expansion of the system. Typical practice is to include space allowance of 20 to 50% for future expansion. TWB closure kits are used to seal entire frames and permit future system expansion. Product Information Product TW Series THRU-WALL BARRIER THRU-WALL Series TW Device Sealing Cable/Conduit A Example Ordering 4F 110 diagram.) openings notused.(SeeExampleB where possibleandTWPplugstofill to accommodatesmallerdiametercables assemblies required.SpecifyTWRreducers select thequantityofsealingblock Step 3. from largesttosmallest. Step 1. Spare capacityrequired: .945" O.D. control cables–sizesrangingfrom.550"to ranging from2.140"to2.180"O.D.31 Cables specified: Cable traysize: Ordering ExampleB: Total same sealingblockassemblysize. Step 2. Total In Inches: Dimensions 4F 6.500–.750 .750–1.000 2.000–2.250 37 26 5 6 Cable Qty. Starting withthelargestcableO.D., Group cablesbyO.D.andrank Group cablesthatfallwithinthe www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 0.550 .637 .700 .890 .945 2.140 10 2.180 9 7 4 1 2 CableO.D. 4 Cable Qty. 37 24" 6 powercables–sizes Cable/Conduit SealingDevice Dimensions Ordering ExampleB O.D. Range Sealing Block TW Series THRU-WALL BARRIER 25% cable/conduit arrangement.) on futureexpansionneedsand/orspecific space. (Choiceofframecouldvarybased sealing blockassemblytofillunusedframe spaces. OneTWB3andoneTWB1blank mounting frameswithtotalcapacityof20 Selection: Total spare capacity Specification requires25% Total framespacesrequired expansion. in sparecapacityrequiredforfuture appropriate sizemountingframe(s).Factor sealing blockassembliesandselect Step 4. required forunusedopeningsintheTWB2112. unused openinginTWB2063andtwoTWP1plugsare minimum framespace.OneTWP3plugisrequiredfor TWB2062. Thisdramaticallyincreasescabledensityin assemblies aresandwichedbetweentwohalvesofa Note: syCt O.D.Range Assy Cat.# Sealing Block TWB2112 TWB2062 TWB2063 TWB40366 TWB40366 TWB2112 In thisexample,twoTWB2112sealingblock Total theframespacesrequiredfor Two TWF10(oroneTWF20) .500–.750 .500–.750 .750–1.000 2.000–2.250 2.000–2.250 Totals .500–.750 © ® 2013 Eaton’sCrouse-Hinds Business Openings Number of 11 2 — 11 11 66—26512 33—433—4 03 16 2 3 2 37 9 40 11 20 4 16 be Sealed Cables to headquarters. Eaton's Crouse-HindsECMfieldrepresentativeor *For TWFSmountingframeholedimensions,contact 1 TWB1 TWB3 (1) TWP1 (1) TWP3 (2) TWB2112 (1) TWB2062 (2) TWB2063 (1) TWB40366 (1) TWF10or(1)TWF20 (2) (2) specification/order shouldread: Step 5 . Billofmaterialsfor Example Bdiagram Not Used Openings Required Frame Spaces 4F 111 4F TWB TWK 2013 Eaton’s Crouse-Hinds Business © TWF20 (82 lbs.) TWF12 (38 lbs.) 1. Dimensions are shown as inches (mm). 2. Dimensions shown for TWF frames also apply for TWFR retrofit frames. ® www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright TWF30 (97 lbs.) TWF24 (88 lbs.) TWF6 (20 lbs.) TWF10 (25 lbs.) *For TWF mounting frame hole dimensions, contact Eaton's Crouse-Hinds ECM field representative or headquarters. TW Series THRU-WALL BARRIER THRU-WALL Series TW Device Sealing Cable/Conduit Dimensions* Dimensions In Inches: 4F 112 Link-Seal Devices Applications: Eaton'sCrouse-HindsLink-Seal • Seals Carbon Steelw/ZincDichromate– Fire Option S316 316 StainlessSteel–Environmental with Environmental Seals Carbon Steel,ZincDichromatePlate – Fasteners: • Steel w/ZincDichromatePlate–FireSeals Seals Glass ReinforcedNylon–Environmental PressurePlates: • Silicone (Grey)–FireSeals EPDM (Black)–EnvironmentalSeals RubberSealElements: • Standard Materials: Absorbsshock,soundandvibration– • Compensatesformisalignment– • Corrosionprotection–whereinstallation • Resistancetohighandlowtemperatures • FireSeals–forfireprotectioninfloor • EnvironmentSeals–Link-Seal • PositiveHydrostaticSealing–properly • Savestimeandmoney–Link-Seal • Features andBenefits: penetration. mechanical sealusedforanytypeof casings. Link-Sealisamodular conduit inconcretewalls,floorsand quick, economicalwaytosealaround threaded connections reduce conduitfailureduetofatigueand this inherentbenefitofLink-Sealhelps seals effectively off-center conduitconditionsandstill Link-Seal allowsforsomeangularand eliminated casing. Metal-to-metalcontactis provides completeseparationpipeand electrolysis) isrequired,Link-Seal against galvaniccorrosion(or –67°F to+400°F material thatresiststemperaturesfrom Seal ismanufacturedfromasilicone –40°F to+250°F.Link-SealFire that resisttemperaturesfrom manufactured fromspecialcompounds – Link-Sealenvironmentalsealis Factory Mutualapproved and wallpenetrationsLink-Sealis wide rangeofchemicals resist aging,ozone,sunlight,wateranda elements arespeciallycompoundedto life anduseasapermanentseal.Seal environmental sealisdesignedforlong applications performance requirementsofmost (40 feetofhead),whichexceedsthe installed, Link-Sealisratedat20psig competition products installs inupto75%lesstimethan 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Link-Seal Concrete Walls, Floors, or Ceilings or Floors, Concrete Walls, Conduit Passing Through Environmental Sealfor ® is the ® Devices LSA200-C-04. the conduitusingLink-Sealpartnumber hole –Corea2"diameterandinstall modified inthefield. longandcanbe sleeves areastandard16 provided intheproperlength.Plastic sleeve partnumbertoinsuretheis the wallorfloorthicknesstosteel are orderedseparately.Remembertoadd cast intoconcretewallsorfloors.Sleeves Both typesofsleevesaredesignedtobe Select eithertheplasticormetalsleeve. Sleeve Methods: For select thesealpartnumber.Example: Note theappropriateholediameterand Method: Cored orCastHole cored orcastholeinstallation. you’ve selected.Nosleeveisneededfor numbers undertheinstallationmethod left. Thenlocatethesealandsleevepart you areinstallinginthecolumnson It’s easy.Locatetheconduitsizeandtype Ordering Information: Seal Environmental Conduit 3 / 4 " EMTconduitthroughacored © 2013 Eaton’sCrouse-Hinds Business Corrosive Environments Wet Locations number becomesLSA200-S316-04. stainless steelboltsandnutsthecatalog hole isanLSA200-C-04;orderedwith (acetone, alcohol,ketones). alkalis, andsomeorganicchemicals resistant tomostinorganicacidsand protection isrequired.EPDMrubber electrical insulationwherecathodic atmospheric conditions.Theyprovide for useinwater,directgroundburialand dichromate finish.Thesesealsaresuitable with steelboltsandnutsazinc conduit sealsismadefromEPDMsupplied The standardproductforenvironmental Materials: a catalog numberwith"S316".Forexample, environments, replacethe"C"inseal stainless steelboltsandnuts,forcorrosive To orderthestandardproductwith316 Options: 1 / 2 " sealforrigidsteelconduitacored 4F 113 4F LSA275 C 04 LSA200 C 04 LSA200 C 04 LSA200 C 04 LSA200 C 04 LSA200 C 09 LSA200 C 09 LSA300 C 08 LSA300 C 08 LSA325 C 05 LSA325 C 05 LSA300 C 10 LSA300 C 10 LSA425 C 06 LSA300 C 15 Seal for Steel Sleeve Cat. # LSA300 C 06 LSA275 C 06 LSA300 C 06 LSA315 C 06 LSA315 C 05 LSA315 C 05 LSA315 C 05 LSA315 C 05 LSA300 C 05 LSA300 C 05 LSA275 C 06 LSA275 C 06 LSA200 C 05 ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ ➀ Steel Sleeve Cat. # 2013 Eaton’s Crouse-Hinds Business © n be field cut to desired length. Seal for Plastic Sleeve Cat. # Plastic Sleeve Cat. # Wet Locations Wet Environments Corrosive LSA275 C 04LSA200 C 04LSA200 C 04 LS CS 2 16LSA200 C 04 LS CS 2 16 LSA200 C 04LSA275 C 06 LS CS 2 16 LSA200 C 04LSA275 C 06 WS2 15 LSA200 C 04 LS CS 3 16 WS2 21 LS CS 3 16 LSA315 C 04 WS2 21 LS CS 3 16 LSA315 C 04 15 WS2 LSA315 C 04 15 WS2 20 WS2.5 LSA300 C 04LSA275 C 07LSA275 C 07 LS CS 3.5 16LSA315 C 05 LSA315 C 05 LS CS 3.5 16LSA300 C 05 LSA300 C 05 LS CS 3 16LSA300 C 05 WS3.5 22 LSA200 C 06 WS3.5 22 LS CS 3.5 16 LSA300 C 05 LS CS 3.5 16 WS3.5 22 LSA275 C 08 LS CS 3.5 16 WS3.5 32 LSA275 C 08 WS3.5 22 LSA200 C 09 WS3.5 22 LSA200 C 09LSA300 C 08 LS CS 4 16LSA300 C 08 LS CS 4 16 LSA200 C 09 LSA200 C 09LSA325 C 05 LS CS 5 16 WS4 23 LSA325 C 05 LS CS 5 16 LSA300 C 08 WS4 23 LSA300 C 08LSA300 C 10 LS CS 6 16 WS5 25 LSA300 C 10 LS CS 6 16 LSA325 C 05 WS5 25 LSA325 C 05LSA425 C 06 LS CS 6 16 WS6 28 LS CS 6 16 LSA300 C 10LSA475 C 10 WS6 28 LSA300 C 10 LS CS 8 16 WS6 28 LSA425 C 06 WS6 28 LS CS 10 16 LSA475 C 10 32 WS8 18 WS8 Seal for Hole Cast/Cored Cat. # LSA300 C 06 LS CS 4 16 LSA300 C 06 WS4 23 LSA315 C 04 LS CS 3 16 LSA300 C 04 WS2.5 20 LSA300 C 06 LS CS 4 16 LSA300 C 06 WS4 23 LSA315 C 06 LS CS 4 16 LSA315 C 06 WS4 23 LSA300 C 04 LS CS 3 16 LSA300 C 04 10 WS2.5 LSA300 C 04 LS CS 3 16 LSA300 C 04 WS2.5 20 Cast/Cored Hole Dia. (inches) www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Conduit Actual O.D. (inches) Devices ® Conduit Type* "" EMT/RSC IMC 2.875"" 2.857 4.000 EMT/RSC IMC 4.000 4.000 3.971 6.000 6.000 """ RSC" EMT IMC 1.660 RSC 1.740 1.883 1.900 3.000 3.500 3.500 3.500 "" EMT IMC 1.510 1.638 3.000 3.000 2 2 2 2 4 2 2 2 4 4 Specify length of steel sleeve in inches. Example: S6-28-08 is 8" long. All plastic sleeves come in standard 16" lengths and ca Specify length of steel sleeve in inches. Example: S6-28-08 is / / / / / / / / / / "" IMC RSC 1.029 1.050 2.500 2.500 """ EMT" IMC RSC .706 EMT .815 .840 .922 2.000 2.000 2.000 2.000 1 1 1 1 1 1 1 1 1 1 4 4 2 2 2 4 / / / / / / 2 3"3"3 3 EMT/RSC IMC 3.5004"4" 3.4765" 5.000 EMT/RSC6" IMC 4.500 RSC 5.000 4.466 RSC 6.000 5.563 6.625 6.000 8.000 10.000 *EMT – Electrical Metallic Tubing; IMC – Intermediate Metal Conduit; RSC – Rigid Steel Conduit *EMT – Electrical Metallic Tubing; IMC – Intermediate Metal Conduit; ➀ 3 3 Ordering Information - Environmental Conduit Seal Information - Environmental Ordering Conduit Nominal Size 1 1 1 3 2 2" RSC 2.375 4.000 1" EMT 1.163 2.500 2" IMC 2.360 4.000 1 1 1 1 1 2" EMT 2.197 4.000 1" IMC 1.290 3.000 1" RSC 1.315 3.000 1 Link-Seal Environmental Seal for Environmental through Conduit passing Walls, Concrete or Ceilings Floors The last two digits of the seal part number indicate the number of links (and the number of bolts) per seal. 4F Link-Seal® Devices Fire Rated Fire Seal for Conduit passing through Concrete Walls, Floors or Ceilings

Fire Conduit Seal 4F Ordering Information: Sleeve Methods: Options: Locate the conduit size and type you are Select the appropriate metal sleeve for the To order the fire seal for a 3-hour rating, installing in the columns on the left. Then size and type of conduit being installed. replace the "T" in the seal catalog number 1 locate the seal and sleeve part number The sleeve should be ordered separately. with a "FS". For example, a /2" seal for under the installation method you've Remember to add the wall or floor rigid steel conduit for a cored hole is an selected. No sleeve is needed for cored or thickness to the steel sleeve part number LSA200-T-04; ordered with option FS the cast hole installation. to insure the sleeve is provided in the catalog number becomes LSA200-FS-04. proper length. A 3-hour fire seal can also be made by Cored or Cast Hole using two Model T’s back-to-back. Materials: The Model FS is basically two Model T's Method: back-to-back. In Model FS, a tie rod The standard product for fire conduit seals tightens both seals simultaneously – for Note the appropriate hole diameter and is made from grey silicone supplied with use when only one side of an opening is select the seal part number. Example: For steel bolts and nuts with a zinc dichromate 3 accessible. /4" EMT conduit through a cored hole finish. These seals are Factory Mutual –Core a 2" diameter hole and install the approved for use as a 1-hour fire stop and conduit using Link-Seal Part number can handle temperature extremes of –67°F LSA200-T-04. to +400°F.

Fire Conduit Seal - Ordering Information

Conduit Conduit Cast/Cored Seal for Steel Seal for Nominal Conduit Actual O.D. Hole Dia. Cast/Cored Hole Sleeve Steel Sleeve Size Type* (inches) (inches) Cat. # Cat. # Cat. #

1 /2" EMT 0.706 2.000 LSA275 T 04 WS2 15 ➀ LSA275 T 04 1 /2" IMC 0.815 2.000 LSA200 T 04 WS2 21 ➀ LSA200 T 04 1 /2" RSC 0.840 2.000 LSA200 T 04 WS2 21 ➀ LSA200 T 04 3 /4" EMT 0.922 2.000 LSA200 T 04 WS2 15 ➀ LSA200 T 04 3 /4" IMC 1.029 2.500 LSA275 T 06 WS2 15 ➀ LSA200 T 04 3 /4" RSC 1.050 2.500 LSA275 T 06 WS2.5 20 ➀ LSA275 T 06 1" EMT 1.163 3.000 LSA315 T 04 WS2.5 20 ➀ LSA275 T 06 1" IMC 1.290 3.000 LSA300 T 04 WS2.5 10 ➀ LSA275 T 06 1" RSC 1.315 3.000 LSA300 T 04 WS2.5 20 ➀ LSA200 T 05 1 1 /4" EMT 1.510 3.000 LSA300 T 04 WS3.5 22 ➀ LSA315 T 05 1 1 /4" IMC 1.638 3.000 LSA275 T 07 WS3.5 22 ➀ LSA315 T 05 1 1 /4" RSC 1.660 3.000 LSA275 T 07 WS3.5 22 ➀ LSA300 T 05 1 1 /2" EMT 1.740 3.500 LSA315 T 05 WS3.5 32 ➀ LSA300 T 05 1 1 /2" IMC 1.883 3.500 LSA300 T 05 WS3.5 22 ➀ LSA300 T 05 1 1 /2" RSC 1.900 3.500 LSA300 T 05 WS3.5 22 ➀ LSA275 T 08 2" EMT 2.197 4.000 LSA315 T 06 WS4 23 ➀ LSA315 T 06 2" IMC 2.360 4.000 LSA300 T 06 WS4 23 ➀ LSA300 T 06 2" RSC 2.375 4.000 LSA300 T 06 WS4 23 ➀ LSA300 T 06 1 2 /2" EMT/RSC 2.875 4.000 LSA200 T 09 WS4 23 ➀ LSA200 T 09 1 2 /2" IMC 2.857 4.000 LSA200 T 09 WS4 23 ➀ LSA200 T 09 3" EMT/RSC 3.500 5.000 LSA300 T 08 WS5 25 ➀ LSA300 T 08 3" IMC 3.476 5.000 LSA300 T 08 WS5 25 ➀ LSA300 T 08 1 3 /2" EMT/RSC 4.000 6.000 LSA325 T 05 WS6 28 ➀ LSA325 T 05 1 3 /2" IMC 3.971 6.000 LSA325 T 05 WS6 28 ➀ LSA325 T 05 4" EMT/RSC 4.500 6.000 LSA300 T 10 WS6 28 ➀ LSA300 T 10 4" IMC 4.466 6.000 LSA300 T 10 WS6 28 ➀ LSA300 T 10 5" RSC 5.563 8.000 LSA425 T 06 WS8 32 ➀ LSA425 T 06 6" RSC 6.625 10.000 LSA475 T 10 WS8 18 ➀ LSA300 T 15 ➀Specify length of steel sleeve in inches. Example: WS6-28-08 is 8" long. *EMT – Electrical Metallic Tubing; IMC – Intermediate Metal Conduit; RSC – Rigid Steel Conduit The last two digits of the seal part number indicate the number of links (and the number of bolts) per seal.

114 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 4F 2 2 2 2 2 / / / / / 1 1 1 1 1 115 4F Thread Size (inches) L 5/16–5/18 3 5/16–5/18 3 5/16–5/18 4 3/8–3/163/8–3/16 5 4 32 32 32 4 4 / / / / / H (inches) .180.180 M5 M5 2 2 7 7 7 1 1 2013 Eaton’s Crouse-Hinds Business 2 2 2 16 16 © / / / / / Hex Across Flats 1 1 1 9 9 M5 slotted hex M5 slotted hex 16 16 16 16 2 4 2 / / / / / / / T (inches) 1 3 5 5 7 7 1 4 8 2 2 2 / / / / / 1 7 1 1 1 R (inches) 2 1 2 2 2 3 3 Dimensions 6 2 16 8 2 2 / / / / / / 1 1 7 1 1 1 8 / 1 3 3 3 A (inches) 7 8 4 4 8 8 / / / / / 3 3 3 3 3 Avg. Length After Avg. Tightening (inches) 21 21 2 2 1 1 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2 2 2 2 4 4 / / / / / / 1 1 1 1 3 3 Free Length (inches) Rubber Sealing Element Plate Pressure Bolt Devices ® .478 1 Actual Thickness (inches) .607.687.807 1 .875 2 2 3 2 1.0621.562 3 3 LSA200 C Link-Seal Cat. # LSA275 C LSA300 C LSA315 C LSA325 C Technical Information Technical LSA425 C LSA475 C Dimensions In Inches: Link-Seal 4F 116 4F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright © 2013 Eaton’sCrouse-Hinds Business Elbows, Couplings, Hubs, Grounding 5F Devices, Plugs, Reducers, Service Entrance and Unions Hazardous and Non-hazardous 5F Description Page No. Description Page No.

Application/Selection see page 118 Service Entrance Fittings Elbows Heads F Series EL Series see page 121 see page 135 FE / FT Series see page 122 Unions Flexible & Expansion Joint Couplings Non-Expansion EC Series see pages 127–128 UNA Series see page 121 XD Series see page 129 UNF Series see page 120 XJG Series see page 130 UNL Series see page 120 XJG-EMT Series see page 131 UNY Series see page 120 XJGD Series see page 132 Expansion UNF Series see page 123 Grounding Devices, Straps, Clamps UNY Series see page 123 GC Series see page 134 UNFL Series see page 123 Hubs UNYL Series see page 123 HUB Series see page 133 Nipples Pipe Plugs NOR Series see page 126 PLG Series see page 124 Conduit Liners NOR Series see page 126 LNR Series see page 136 Reducers and Adapters AMN / ANM Series see page 125 RE Series see page 124 REA Series see page 124 REC Series see page 124 NOR Series see page 126

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 117 5F 118 ecito Suffix Corro-free Description Options: Materialandfinishrequired–determine • Typerequired–determinefrom • Sizerequired–determinefromconduit • Grounding Receptacles/Connectors: Elbows, Unions,Reducers,Couplingsand Typerequired–(threaded,slipfit, • Sizerequired–determinefromsizeand • Service Heads: Selection: Considerations for Mostoftheitemsshownabovearealso • Use inHazardous Areas: Ground • Changedirection • Terminate • Reduce • Connect • Plug • areas to: conduit systemswithinnon-hazardous outlets. Thesefittingsareinstalledin lighting fixturesand/orfinalelectrical overhead serviceentrancetomachinery, an electricalconduitsystemfromthe miscellaneous fittingsneededtocomplete and groundingstrapswithclampsarethe couplings, groundingreceptacleandstud Service entranceheads,elbows,unions, Applications: fumes, buriedinconcrete,etc.) from environmentalconditions(corrosive conduit tooutletboxetc.) and femalethreadforconnecting intended functioninsystem(i.e.male size. with servicehead. clamp) –determinefromconduitused conduit ormastsize. number ofconductorsinserviceand information). specific listingsforcompliance suitable forhazardousareas(see 5F ™ epoxy powdercoat www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Entrance andUnions Service Reducers, Plugs, Devices, Grounding Hubs, Couplings, Elbows, Application andSelection S752 C e ae14UFsepg 2 J e ae130 seepage XJG 120 seepage UNF 134 seepage GCT Csepg 3 EL/FE 134 seepage GC e ae15ULsepg 2 Dsepg 129 seepage XD 120 seepage UNL 135 seepage F eisPg eisPg eisPage Series Page Series Page Series UNYL C e ae14LRsepg 136 seepage LNR 134 seepage GCR JDsepg 132 seepage XJGD EC e ae123 see page see pages 127–128 © 2013 Eaton’sCrouse-Hinds Business PLG ae124 page see pages 121–122 see XJG-EMT Esepg 124 seepage RE E M e ae124 seepage REA /AMN E e ae124 seepage REC U e ae133 seepage HUB e ae131 see page 5F 119 5F iron alloy iron alloy iron alloy iron alloy iron alloy or iron alloy hubs, Feraloy Feraloy Feraloy Feraloy Feraloy iron alloy iron alloy iron alloy iron alloy iron alloy iron alloy iron alloy iron alloy ® Bronze body, cap and chain; brass grounding stud Feraloy Brass Feraloy Feraloy Feraloy Feraloy Standard Materials Feraloy Feraloy Feraloy Brass neoprene outer jacket, tinned neoprene outer jacket, copper grounding strap Feraloy Bronze connector body; brass aluminum cable clamp; stud Flexible copper, tinned 2013 Eaton’s Crouse-Hinds Business © Used to provide static electricity grounding connection Threaded rigid Threaded rigid Steel or Used as clamp for GC100 Threaded rigid Steel or Brass details connect" static electricity grounding connections with portable cable grounding " 2 / 1 " 4 / 3 " to 2 2 " Threaded rigid / " male 4 1 4 / 3 / 1 " - 4 " female; / 4 3 / 3 " to 1 2 " male; / 4 1 / 1 " to " to 6" - 5" / 20mm " to 5" - 4" rigid Threaded 2 8 2 / / / 1 1 1 " female; 16mm to 63mm 4 " - " to 4" / 20mm to 63mm Threaded rigid" to 4"" to 4"" to 6" Steel or " to 4" See catalog page 7F for Threaded rigid & IMC Threaded rigid or IMC EMT Polypropylene " to 1"" to 1 Threaded rigid " - " threaded grounding " to 4"" - " to 6" / 20mm to 50mm Threaded rigid" to 6" / 20mm to 50mm rigid Threaded Threaded rigid Steel or Steel or Steel or " to 4" conduit" to 2" conduit rigid Threaded or EMT Threadless rigid Copper-free aluminum Copper-free aluminum / " male to 1 4 2 2 2 2 2 2 2 2 4 2 2 2 2 2 4 2 / / / / / / / / / / / / / / / / / rod and female 1" to 6" Threaded rigid 3 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 3 to 50mm female; male to 1" female; 1" male to 1 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Adapter fitting Reducer coupling Clamp type service entrance Clamp type service entrance head studGround connector and .312" to .406" Used to provide "quick Grounding clamp Adjustable Conduit liner Expansion fitting Union, 90° angle; for connecting conduit to cast boxes Union, female; for connecting conduit to conduit Union, 90° to 180° adjustable; for connecting conduit to boxes for conduit support 45° elbow, female 12" to 4" Threaded rigid Flexible coupling Expansion fitting Expansion-deflection 1" to 4" Threaded rigid 90° elbow, male; 90° elbow, female; 90° elbow, male and female Union, male; for connecting conduit to cast boxes Expansion/deflection coupling 90º elbow, metricReducer, threaded 20mm to 25mm Threaded rigid Cooper-free aluminium Conduit hub Pipe plug, recessed head or square head Threaded service entrance Threaded service entrance head Grounding strap 50' coil Used for bonding and Grounding receptacle REA / AMN REC F GCT GC102 LNR XJG UNL UNF UNA Male EL-45° EC XJG-EMT XJGD EL-90° Series Description Size Range Conduit Type UNY XD FE RE HUB F PLG GC100 GCR Quick Selector Chart Quick Selector Elbows, Couplings, Hubs, Grounding Devices, Plugs, Reducers, Service and Unions Entrance 5F 120 NEC/CEC: • Compliances: Certifications and CSAStandard:C22.2 No.30 • ULStandard:1203 • Tochangedirectioninthreadedrigid • box orfittinghub: EL elbowsareinstalledinconduitrunor between 90°and180°. installations whenentranceangleis UNA unionsareusedinconduitandfitting UNF–toconnectconduitconduit,or • UNY–toconnectconduita • threaded thickwallconduitsystems: UNY andUNFunionsareinstalledin Applications: both strongandcompact. EL elbowshaveasmoothinteriorandare Permitconduitjointsatanglesbetween • Haveasingleclampingnutonangle, • UNA unions: Stronganddurableconstruction • Compactdesignwhichpermits • UNY, UNFandUNLunionshave: Features: †See compliancesforclassificationofeachproduct. at aboxorfitting conduit runby90°,orwhenterminating modification oftheconduitsystem to provideameansforfuture fitting, junctionboxordeviceenclosure 90° and180° making itbothaunionandconnector equipment to otheradjacentconduitand/or assembly withaminimumofclearance Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsA,B,C,D Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupD Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsC,D Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsB,C,D 5F EL UNA EL, UNF,UNL,UNY-allsizes -905, -1005 -606, -706,-806, UNF/UNY406, -506, UNL 105,-125,-215,-205 UNF/UNY 105,-215,-205,-305 1 / 2 ", www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 3 / 4 ", 1" Unions andElbows UNY,UNFunions–1 • UNL,UNAunions– • ELelbows– • ecito Suffix Copper-free aluminum Description Options: • Steel–electrogalvanizedwithchromate • Standard Finishes: UNY,UNFunions– • Standard Materials: In Inches: Dimensions UNY UNL ieCt # Cat. 3 1 3 1 Size 90° Angle / / / / 4 2 4 2 iron alloy iron paint electrogalvanized andaluminumacrylic Feraloy treatment to female to female to to 6" UNY/UNF Not availableonUNAor5"and 3 1 / / 4 2 DIA iron alloy,malleable– 3 1 / / 4 2 Feraloy male male l III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. D† II, C, Cl. B, Groups A, 1&2, Div. I, Cl. Feraloy 1 / iron alloyorductile 2 1 " to1"–steel / 4 " to6"– © 2013 Eaton’sCrouse-Hinds Business LENGTH iron alloy UNL205 UNL105 UNL215 UNL125 Feraloy SA ® i.151525205 215 d 125 c b 105 a Dim. 66 56 46 3 35 2 24 1 1 1 13 Length 1 Size 3 3 UNL / / / to ieCt ieCt # Cat. Size 3 # Cat. 1 1 Size 4 3 2 2 1 1 1 1 5 3 2 1 6 3 2 / / / 4 4 2 1 1 1 1 4 2 2 / / / / 1 1 1 1 1 1 1 / / / / / / / 2 2 2 4 – 2 2 2 2 2 4 4 female 3 / 1 4 / 2 male 1 "–6 5"–6" 5" –6" Male N UNF UNY / 2 6 5 4 3 2 2 2 " –4" 1 2 1 2 1 1 5 1 3 7 1 1 11 11 11 5 / / / / / / / / / 7 1 17 11 8 8 8 2 4 16 4 4 8 / / / / / 16 16 16 UNY905 UNY706 UNY705 UNY506 UNY505 UNY406 UNY405 UNY205 UNY105 UNY1005 UNY805 UNY605 UNY305 UNY012 UNY806 UNY606 UNY215 UNY014 16 16 / / 32 16 N UNF UNY Dust-Ignitionproof Explosionproof 9 8 6 5 5 4 3 3 2 1 1 1 i.Length Dia. Max. 1 2 1 2 5 3 3 11 1 5 13 1 3 7 13 13 1 7 1 13 11 / / / / / / / / / / / 16 16 4 8 2 16 16 / / / / / / 16 16 16 16 16 16 16 16 16 16 3 2 2 1 1 1 1 3 3 1 4 3 2 1 5 3 2 6 / / / 4 4 2 1 1 1 1 1 1 1 / / / / / / / 2 2 2 2 2 4 4 to 3 3 4 4 3 3 2 2 2 21 1 1 1 1 2 1 2 13 13 1 1 7 3 9 5 1 3 3 13 / / / / / / / / / 5 1 13 7 Female / / / 8 8 16 16 16 8 4 4 4 1 / / / / 8 4 8 1 / 16 16 16 / 2 16 2 " –4" UNF905 UNF706 UNF705 UNF506 UNF505 UNF406 UNF405 UNF205 UNF215 UNF105 UNF1005 UNF805 UNF605 UNF305 UNF012 UNF806 UNF606 UNF014 1 2 1 2 Dia. Max. 9 8 6 5 5 4 3 3 2 1 1 1 5 1 13 7 / / / 5 3 3 11 1 5 13 1 3 7 13 13 1 / / / / / / / / / 8 4 8 / 16 16 16 16 16 16 4 8 2 / / / / 16 16 16 16 16 5F 121 90° 32 / 8 8 8 5F / / / Male & Female 17 5 7 1 1 1 2 90° 32 / 4 4 16 / / / 17 3 1 7 Female 1 1 21 2 4 5 6 EL19* EL29* EL39* EL49* EL59* EL69* EL79 16 8 8 / / / 90° EL196* EL296* EL396* EL496 7 5 7 Male 1 1 1 90° Female 90° Male and female 45° 32 16 / / 16 8 4 4 4 6 16 8 / / / / / / / / 3 3 21 3 15 1 3 1 7 5 Female 1 1 1 1 2 3 2013 Eaton’s Crouse-Hinds Business2013 Eaton’s Crouse-Hinds Business 4 2 2 4 4 2 2 2 / / / / / / / / 1 1 1 1 2 4 2 4 1 1 1 1 2 4 ©© / / / / / / Size1 3 Cat. # 90° Male and Female Size1 3 Cat. # *Available in copper free aluminum – add suffix SA to catalog number. 90° Female 1 1 1 1 1 2 2 †See compliances for classification of each product. Size a a a a 3 EL 1 11 1 1 33 3 43 22 2 Explosionproof Dust-Ignitionproof 8 8 2 / / / 5 7 1 2 2 3 EL1 EL2 EL3 EL4 EL5 EL6 EL7 EL8 EL9 EL10 EL195 EL295 EL395 90° Male 45° Female 16 16 / / 16 / 5 13 11 5 4 4 4 2 2 2 / / / / 1 1 1 1 2 4 2 4 2 4 / / / / 1 90° Male Size1 3 45° Female Cat. # Size1 3 Cat. # 1 1 1 2 2 3 3 4 / / UNA Male Size1 Length1 Width EL 3 Cl. I, Div. 1 & 2, C, Groups D† Cl. II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyrightwww.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright female 90° Male and EL UNA16 UNA26 UNA36

Male (with removable nipple) Male (with removable 90° Male 90° Female 45° Female 2 4 / / 1 Male Size1 3 Cat. # UNA Dimensions In Inches: Unions and Elbows and Unions 5F Condulet® Elbows and Tees Zone 1 Zone 21 For IEC Applications Zone 2 Zone 22 FE and FT Series

Applications: 5F FE and FT conduit fittings are installed in hazardous areas to: • Act as draw-in outlets especially for cables that are stiff due to large size or type of insulation • Make 90º bends in conduit systems, allowing for a straight pull in either direction • Provide access to wiring for maintenance and future system changes Features: • Maximum volume for bends within a compact overall size • Large openings to facilitate cable pulling Ordering Information: Inspection Elbows and Tees Selection Certifications and Cat. # Type Entry Size (metric) Compliances: FE1 Elbow M20 (F)-M20 (F) FE2 Elbow M25 (F)-M25 (F) Type of Protection FT1 Tee M20 (F)-M20 (F) • Ex d, DIP A21, IP67 FT2 Tee M25 (F)-M25 (F) Degree of Protection Dimensions (mm) • IP67 Gas Group • IIB Approvals • Ex1108U Standard Materials: • Body – Copper-free aluminum • Cover – Brass Standard Finishes: • Natural Options: Description Suffix NPT & BSP thread sizes Consult Factory

122 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 5F 123 5F UNF17 UNF27 UNF37 UNFL37 UNFL17 UNFL27 16 16 16 16 / / 16 8 4 16 / / 8 16 8 2 / / / / 1 1 1 9 11 15 / / / / 7 15 3 3 1 13 2 2 2 2 2 2 2 3 3 3 16 16 16 16 / / / / 1 5 2 2 8 1 5 2 2 8 / / / / / / 5 12 1 1 1 1 1 1 5 13 1 1 2013 Eaton’s Crouse-Hinds Business 2 4 2 4 © / / / / UNFL Female – Long Conduit Size1 3 Cat. # 1 UNF Female – Short Conduit Size1 3 Cat. # 1 Explosionproof Dust-Ignitionproof 16 16 16 16 / / 16 16 16 16 / / 16 16 16 16 / / / / / / / / 3 7 11 3 7 11 3 7 11 3 7 11 1 1 1 1 1 1 1 1 1 1 1 1 UNY17 UNY27 UNY37 UNYL17 UNYL27 UNYL37 16 16 / 16 8 16 2 16 / 8 16 8 16 8 UNYL UNFL / / / / / / / / / / 5 3 13 5 1 3 3 7 13 3 9 1 3 3 4 4 3 5 3 5 3 3 4 4 Dimension Dimension UNYL with sleeve extended UNFL with sleeve extended Cl. I, Div. 1 & 2, C, Groups D Cl. II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III 2 4 2 4 2 4 2 4 2 4 2 4 / / / / UNY Male – Short Conduit Size1 3 UNYL Cat. # Male – Long Conduit Size1 3 Cat. # 1 1 / / / / / / / / 3 3 1 1 UNFL 1 1 SizeUNF a* b c‡ d 3 3 Size a* b c‡ d 1 UNYL 1 1 1 UNY In Inches: Dimensions www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Class I, Division 1 & 2, Groups C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III finish device enclosure conduit spring to insure positive grounding continuity. allows secure gripping with wrench. strength. where space is limited, long length when extra expansion is required. *Overall length at maximum expansion ‡Maximum expansion †Suitable with intermediate Metal Conduit in non-hazardous locations UNF/UNY Expansion Unions Expansion UNF/UNY • Steel – electrogalvanized with chromate • Beryllium copper – natural Standard Finishes: Standard Applications: are designed UNF/UNY expansion unions rigid metal† to be used in all threaded and outdoors, in conduit systems indoors hazardous locations to: •to conduit Connect conduit • a junction box or Connect conduit to • cut too short Compensate for conduit • and contraction of Allow for expansion • Connect stub-ups to threaded conduit • Replace sections of conduit runs Standard Materials: Standard • Body and sleeve – steel • Grounding spring – beryllium copper • NEC/CEC: • UL Standard: 1203 • CSA Standard: C22.2 No. 30 Certifications and Compliances: • Compact design • Internal beryllium copper grounding • Knurled surface on body and sleeve • Steel construction for maximum • Available in two styles – short length Features: 5F 124 CSAStandard:C22.2No.30 • ULStandard:1203 • for GroupsAorB) (see listingsforspecificCat.Nos.suitable NEC/CEC: • Compliances: Certifications and PLGplugsareusedforclosingthreaded • RECconnectstwodifferentsizesof • REAadaptersenlargedrilledandtapped • REreducesconduithubstoasmallersize. • REandRECreducersareusedin • Applications: RECreducers–REC21andREC32in • REAadapters–steel • PLGplugs–Recessed:PLG28-PLG3: • Areavailableintwostyles,flush • Havecleantaperedthreads • PLG plugs: Knurledbodyforeasywrenching • Smoothintegralbushingtoprotectwire • REA adaptershave: Funnelshapedinteriortoguidethewires • Integralbushingsinbothendswhich • REC reducershave: Full,cleancuttaperedthreads • Integralbushingwhichpreventsdamage • RE reducershave: Features: ecito Suffix Copper-free aluminum Description Options: Steel–electrogalvanized withchromate • • Standard Finishes: REreducers–RE1108throughRE54in • Standard Materials: conduit hubs. coupling andreducerinaninstallation. conduit togetherorisusedtoreplacea openings by1NPTsize. threaded heavywallconduitsystems. steel; allothersin PLG65-PLG105: greyironalloy Square Head:PLG15-PLG55:steel, steel, PLG4-PLG10:greyironalloy; (recessed), orsquareheadtype insulation easy topullwire from largetosmallconduit,makingit prevents damagetowires to wires treatment aluminum acrylicpaint Feraloy steel; allothersin Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsA,B,C,D 5F iron alloy–electrogalvanizedand www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Feraloy Feraloy and Plugs Couplings Reducers, ® iron alloy iron alloy SA RE REC 1 1 3 Size Hub Large 54 43 3 32 2 21 21 21 2 1 1 1 1 1 2 –1 2 –1 2 –1 2 – 2 – 1 1 1 1 1 1 – 1 – 6 –5 5 –4 4 –3 4 –3 3 3 3 –2 3 –2 3 –1 2 2 2 ieCt # Cat. 3 1 1 1 Size 4 –2 4 –2 3 3 –1 3 –1 2 1 1 / / / / / 4 4 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 / / / / / / / / / / / / / / / / / / / / / 2 2 2 2 2 4 4 2 2 2 2 2 2 2 2 2 2 2 4 4 4 – – – – – 3 – 2 – 2 – 2 – 1 – 1 – 1 – 1 – 1 – – – 1 – – 3 1 3 1 1 3 1 1 / / / / / / / / 4 2 4 2 1 1 1 1 1 1 1 2 8 4 8 3 1 3 1 / / / / / / / / / / / 2 2 2 2 4 2 4 4 2 4 2 1 1 1 1 / / / / 2 2 4 4 3 3 2 1 3 1 1 1 3 1 1 ieCt # Cat. Size Hub Small / / / / / / 4 4 4 4 2 2 1 1 1 1 1 / / / / / 2 2 2 4 4 l III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. II, Cl. l ,Dv ,Groups A 1&2, Div. I, Cl. RE64† RE63† RE62† RE61† RE54† RE52† RE51† RE42† RE41† RE32† RE31† RE21† RE1308 RE1208* RE1108* RE01412 RE01210 RE109† RE108† RE107† RE97† RE87† RE86† RE85† RE84† RE75† RE74† RE65† RE106† RE98† RE96† RE83† RE76† RE73† RE53† RE43† REC53 REC43 REC01210* REC108* REC97* REC86 REC75 REC605 REC604 REC603 REC602 REC54 REC52 REC42 REC32 REC31† REC21† © 2013 Eaton’sCrouse-Hinds Business †Suitable foruseinClassI,GroupsAandBareas. *Not availableinaluminum. PLG REA † 4 3 3 2 2 1 1 1 ieCt # Cat. 3 1 Size Square Head 11 3 1 Size Hub Male ieCt # Cat. 3 1 1 Size Recessed 4 3 3 2 2 1 1 1 ,B,C,D / / / / / / / 4 2 4 2 4 2 4 1 1 1 1 1 1 1 1 / / / / / / / / 2 2 2 4 2 2 2 4 1 3 ieCt # Cat. Size Hub Female / 4 1 / Square Head 4 Dust-Ignitionproof Explosionproof PLG10 PLG9 PLG8 PLG7 PLG6 PLG5 PLG4 PLG3† PLG2† PLG1† PLG28† PLG105 PLG95 PLG85 PLG75 PLG65 PLG55 PLG45 PLG35† PLG25† PLG15† Recessed REA23† REA34† REA12† 5F 125 5F 2013 Eaton’s Crouse-Hinds Business © are Type B Catalog Page Notes: end 1. Adapters have different size thread at each 2. Adapters may step up the same type of thread same size adapters 3. Downwards adapters are Type A; upward or see Reducers 4. For downward adapters of same thread type, Catalog Page 5. For same size and type of thread, see Unions Zone 1Zone Zone 2 Zone 21 Zone 22 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright please consult factory Ordering Information: Ordering AMN AMN Adapters / ANM Applications For IEC Standard Finish: Standard • Natural Stainless Steel - Replace NP with SS Size Ranges: • sizes may be available; Standard sizes listed in table below; other Standard Materials: Standard • Brass, nickel plated Options: Application: the thread form and/or size in a wide Adapters are used to change metric cable and conduit entries. range of BSP, NPT, and Compliances: Certifications and Type of Protection • Ex d, DIP A21, IP67 Degree of Protection • IP66/67 Gas Group • IIC Approvals • Ex1108U 5F 126 Reducers,Adapters,PlugsandNipples-ZincPlatedSteel • Standard Materials: Nipples: • ReducersandAdapters: • Plugs: • Certifications andCompliances: Plugsareusedforclosingunusedthreadedconduithubs • Adaptersenlargedrilledandtappedopeningsby1NPTsize • Reducersareusedinthreadedheavywallconduitsystemsto • Full,cleancuttaperedthreads • Plugs: Knurledbodyforeasywrenching • Smoothintegralbushingtoprotectwireinsulation • Adapters: Funnelshapedinteriortoguidethewiresfromlargesmall • Full,cleancuttaperedthreads • Integralbushingwhichpreventsdamagetowires • Reducers: Features: Applications: Type PLG M60 x1.5 M50 x1.5 M32 x1.5 M25 x1.5 M20 x1.5 1" NPT 1" ISO hedSz a.# Cat. 3 1 Thread Size Ordering Information-Plugs / / 4 2 sizes ofconduittogether reduce conduithubstoasmallersizeorconnecttwodifferent conduit, makingiteasytopullwire " ISO " ISO IP67 EC-Type examinationcertificateLOM03ATEX3019U Ex II2GEExdIIC IP67 EC-Type examinationcertificateLOM03ATEX3019U Ex II2D Ex II2GEExdIIC Ex II2GEExe IP67 EC-Type examinationcertificateLOM02ATEX3035U Ex II2GEExdIIC Ex II2GEExe 5F 7 7 7 / / / 1 1 1 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Nipples forIEC Applications Plugsand Adapters, Reducers, NOR 000002140659 NOR 000002140658 NOR 000002140657 NOR 000002140656 NOR 000002140655 NOR 000002140365 NOR 000002140133 NOR 000002140125 NOR 000002140117 aeTra eaeTra a.# Cat. 3 1 FemaleThread 3 Male Thread Ordering Information-Reducers 1" ISO aeTra eaeTra a.# Cat. FemaleThread M20 x1.5 Male Thread Ordering Information-Adapters 3 3 1 3 1 3 3 1 PG21 PG16 PG13 M25 x1.5 M20 x1.5 PG16 PG13 2 . PG16 PG16 M25 x1.5 M25x1.5 M20 x1.5 M20x1.5A M20x1.5 PG16 PG16 PG13 1" ISO 1" ISO hedSz yeCt # Cat. 3 1 Type 3 1 Thread Size Ordering Information-Nipples / / / / / / / / / / / © / / / / 4 2 4 4 4 2 4 2 4 4 2 4 2 4 2 " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO 2013 Eaton’sCrouse-Hinds Business 7 7 7 7 7 7 / 7 7 7 7 7 7 7 7 7 7 7 7 / / / / / / / / / / / / / 1 / / / / 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PG21 PG16 PG16 PG13 PG13 M25 x1.5 M20 x1.5 M20 x1.5 3 3 3 3 3 1 1 1 1" ISO 3 1 3 Ex II2D Ex II2GEExdIIC Ex II2GEExe / / / / / / / / / / / 4 4 4 4 4 2 2 2 4 4 2 " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO " ISO EMF 3 EMF 2 EMF 1 EMM 3 EMM 2 EMM 1 7 7 7 7 7 7 7 7 7 7 7 7 / / / / / / / / / / / / 1 1 1 1 1 1 1 1 1 1 1 1 NOR 000002130233 NOR 000002130225 NOR 000002130217 NOR 000002130134 NOR 000002130126 NOR 000002130118 NOR 000112190011 NOR 000112190012 NOR 000112190013 NOR 000112190008 NOR 000112190009 NOR 000112190014 NOR 000112190015 NOR 000112190010 NOR 000112190003 NOR 000112190019 NOR 000112190018 NOR 000112190004 NOR 000112190006 NOR 000112190005 NOR 000112190007 NOR 000112190020 NOR 000112190 NOR 000112190016 NOR 000112190017 NOR 000112190001 NOR 000112190002 NOR 000002190740 NOR 000002190675 NOR 000002190188 NOR 000002190112 IP67 5F 127 5F ECGJH433 ECGJH533 ECGJH733 ECGJH136 ECGJH236 ECGJH436 ECGJH536 ECGJH736 ECGJH727 ECGJH130 ECGJH230 ECGJH430 ECGJH530 ECGJH730 ECGJH133 ECGJH233 ECGJH633 ECGJH833 ECGJH1033 ECGJH636 ECGJH836 ECGJH1036 ECGJH827 ECGJH1027 ECGJH630 ECGJH830 ECGJH1030 ECGJH336 ECGJH330 ECGJH333 4 2 2 4 2 2 2 4 2 2 / / / / / / / / / / 1 1 1 1 1 1 1 1 1 1 2 4 2 4 2 4 / / / / / / 1 3 1 3 1 3 Size Cat. # 333333 1 33 2 36 3 4 363636 1 36 2 3 4 272730 3 4 303030 1 30 2 33 3 4 33 1 36 3636 1 1 2730 2 3030 1 30 1 33 2 33 1 Flexible Length (In.) 33 2 36 2 ECLK ECGJH 2013 Eaton’s Crouse-Hinds Business © Explosionproof Dust-Ignitionproof Locations Wet ECGJH124 ECGJH224 ECGJH424 ECGJH524 ECGJH724 ECGJH127 ECGJH227 ECGJH427 ECGJH527 ECGJH418 ECGJH518 ECGJH718 ECGJH121 ECGJH221 ECGJH421 ECGJH521 ECGJH721 ECGJH1021 ECGJH624 ECGJH824 ECGJH1024 ECGJH627 ECGJH318 ECGJH618 ECGJH818 ECGJH1018 ECGJH321 ECGJH621 ECGJH821 ECGJH324 ECGJH327 4 2 2 4 2 4 2 2 4 2 2 / / / / / / / / / / / 1 1 1 1 1 1 1 1 1 1 1 2 4 2 4 2 4 / / / / / / 1 3 1 3 1 3 Size Cat. # 2124 4 242424 1 24 2 27 3 4 2727 1 2 18181818 1 1 18 1 18 2 21 3 21 4 2121 1 21 1 2 3 Flexible Length (In.) 1821 2 2121 1 24 2 2424 1 27 2 27 1 24 1 27 1 Dimensions In Inches: Cl. I, A, Groups B, C,Cl. D II, Groups E, F, G Cl. III ECGJH512 ECGJH712 ECGJH115 ECGJH215 ECGJH415 ECGJH515 ECGJH715 ECGJH118 ECGJH218 ECGJH14 ECGJH24 ECGJH16 ECGJH26 ECGJH18 ECGJH28 ECGJH110 ECGJH210 ECGJH112 ECGJH212 ECGJH412 ECGJH36 ECGJH38 ECGJH310 ECGJH312 ECGJH612 ECGJH1012 ECGJH315 ECGJH615 ECGJH1015 ECGJH812 ECGJH815 S516 S758 2 2 4 2 2 4 / / / / / / 1 1 1 1 1 1 2 4 2 4 2 4 2 4 2 4 2 4 2 4 / / / / / / / / / / / / / / 1 3 1 3 1 3 1 3 1 3 1 3 1 3 Size Cat. # 1 1 1 1 1 2 2 4 1 1 2 2 4 3 3 1 1 ECGJH (Male connections both ends) ECGJH (Male connections Flexible Length (In.) 12 12 12 15 15 15 15 15 4 6 8 8 10 10 12 12 12 15 15 15 18 18 6 6 10 12 12 15 8 12 4 : www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright " to 2" 2 / 1 iron alloy; electrogalvanized with aluminum ® ECGJH S516 Only Feraloy ", 2" (4" to 36" flexible 2 / 1 " (4" to 36" flexible length " (Brass and S516) – Class I, 4 4 / / 3 3 ", 1 4 / 1 " to 4" – stainless steel; natural " to 4" – 2 4 " to 4" have a Type 304 stainless steel braid / / " to 1" – steel; electrogalvanized with chromate treatment " and " to 2" – forged brass; natural " and 2 1 1 2 2 2 2 / " to 2" have bronze braid covering and flexible brass inner core; / / / / " trade size 110 inches long, use catalog number 1 2 1 2 only) – Ex d IIC, IP66 1", 1 Division 1, Groups A, B, C, D 1" to 2" (Brass and S516) – Class I, Division 1, Groups C, D 1 1 1 1 length only) – Ex d IIB, IP66 acrylic paint 4 / / packing is woven cotton braid impregnated with asphalt 1 insulates against grounds and burn- through from short circuit braid provides continuous electrical path male end fittings and one male threaded end fitting pressure (Class I) of rigid conduit difficult member is required in a conduit system member is required in a or to allow to accomplish difficult bends, of connected for movement or vibration equipment or units "–2" Brass Construction "–2" Brass 3 2 / • Female unions: All sizes also for use in Class II, Division 1, Groups E, F, G and Class III • UL Standard: 1203 • ATEX and IECEx - •2 ECGJH2110. For severely corrosive locations, a flexible PVC protective coating will be supplied Special coupling lengths available up to 144 inches. To order, change last two digits in any standard catalog number to the two or three digit length desired in whole inches i.e. To order a Options: DescriptionAll stainless steel (available for ECGJH only) Suffix Standard Materials and Finishes: Standard • End fittings: • NEC: Certifications and Compliances: • • No bonding jumpers required, metallic • ECGJH combination has two threaded • ECLK combination has one female union •withstand explosive Rugged design to • Mechanical abuse • locations Liquid-tight for wet • of space makes use For use where lack • Wire duct liner in sizes Applications: EC couplings are used: • where a flexible In hazardous areas Features: Couplings 1 2-1/2–4" Stainless Steel construction only Stainless Steel 2-1/2–4" 5F 128 ieabcde d c 4 3 2 b 2 1 1 1 a 1 Size ECGJH andECLK 3 1 1 ieRdu ieRadius Size Radius 3 1 Size Minimum RecommendedRadiusofBend 1 / / connection 1end,femaleend) ECLK (ECGJHprovide withUNFFemale union–male / / 4 2 1 1 1 12 12 10 6 6 18 18 15 15 15 12 15 15 15 15 15 12 12 12 12 12 10 10 8 8 6 4 15 12 8 egh(n)Sz a.# Cat. Size Length (In.) Flexible 4 4 2 1 1 / / / / / 2 2 4 2 4 5F 4 3 3 2 34 3 2 2 1 www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 5 1 1 5 7 1 1 7 / / / / / / / / 4318 3 14 4430 16 4 2 2 16 14 12 10 8 8 4 16 8 2 16 8 3 3 4 2 2 1 1 4 2 2 1 1 1 1 1 1 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 / / / / / / / / / / / / / / 4 2 4 2 4 2 4 2 4 2 4 2 4 2 1 1 1 1 1 1 / / / / / / 2 2 4 2 2 4 2-1/2–4" StainlessSteelconstructiononly 1 / 2 ECLK815 ECLK812 ECLK1015 ECLK615 ECLK315 ECLK1012 ECLK612 ECLK312 ECLK310 ECLK38 ECLK36 ECLK218 ECLK118 ECLK715 ECLK515 ECLK415 ECLK215 ECLK115 ECLK712 ECLK512 ECLK412 ECLK212 ECLK112 ECLK210 ECLK110 ECLK28 ECLK18 ECLK26 ECLK16 ECLK24 ECLK14 "–2" BrassConstruction 1 4 4 4 3 2 2 1 Couplings 7 1 15 9 7 1 1 15 1 / / / / / / / 16 16 4 2 8 8 2 / / 16 16 1 / 2 3 1 1 25 1 1 1 1 1 3 1 1 3 5 7 7 1 / / / / / / / / 71 27 1 24 71 27 2 27 1 24 24 2 24 1 21 21 2 21 18 72 1 27 27 4 3 27 2 1 24 24 24 24 4 3 24 2 1 21 21 1 21 21 4 3 21 21 2 1 18 1 18 1 18 18 18 18 egh(n)Sz a.# Cat. Size Length (In.) Flexible 4 4 8 8 8 2 16 8 16 7 5 5 5 4 3 3 31 1 3 1 1 3 3 5 1 / / / / / / / / 2 8 16 16 16 16 8 4 3 1 3 1 3 1 / / / / / / 4 2 4 2 4 2 1 1 1 1 1 1 1 1 1 1 1 / / / / / / / / / / / 2 4 2 2 4 2 2 4 2 2 4 6 5 4 3 3 2 1 1 3 1 5 13 1 3 7 13 9 / / / / / / / ECLK327 ECLK324 ECLK521 ECLK421 ECLK221 ECLK121 ECLK718 ECLK518 ECLK418 ECLK527 ECLK427 ECLK227 ECLK127 ECLK724 ECLK524 ECLK424 ECLK224 ECLK124 ECLK721 ECLK627 ECLK1024 ECLK824 ECLK624 ECLK1021 ECLK821 ECLK621 ECLK321 ECLK1018 ECLK818 ECLK618 ECLK318 16 16 16 16 4 8 16 / / 16 16 62 36 2 33 04 3 2 1 30 30 30 30 4 3 30 27 27 64 3 2 1 36 36 36 36 4 3 36 2 1 33 33 33 33 33 61 1 36 36 36 1 1 33 33 2 33 1 1 30 30 30 2 30 27 egh(n)Sz a.# Cat. Size Length (In.) Flexible © 2013 Eaton’sCrouse-Hinds Business l III Cl. G F, GroupsE, II, D Cl. C, B, GroupsA, I, Cl. 3 1 3 1 3 1 / / / / / / 4 2 4 2 4 2 1 1 1 1 1 1 1 1 1 1 / / / / / / / / / / 2 2 4 2 2 2 4 2 2 4 ECLK1030 ECLK830 ECLK630 ECLK1027 ECLK827 ECLK1036 ECLK836 ECLK636 ECLK1033 ECLK833 ECLK633 ECLK730 ECLK530 ECLK430 ECLK230 ECLK130 ECLK727 ECLK736 ECLK536 ECLK436 ECLK236 ECLK136 ECLK733 ECLK533 ECLK433 ECLK233 ECLK133 ECLK336 ECLK333 ECLK330 Wet Locations Dust-Ignitionproof Explosionproof 5F 129 5F 3. Parallel misalignment. 2013 Eaton’s Crouse-Hinds Business © XD012 XD8 XD014 XD010 XD9 16 16 16 16 / / / / 4 2 16 2 / / / / 15 1 1 15 5 15 1 15 6 8 9 4 4 4 5 5 6 2 / 1 5 Hub Size3 Cat. # 6 3 4 8 4 8 8 4 4 2 8 4 / / / / / / / / / 3 3 3 1 1 1 5 3 7 7 7 ab 73 7 7 7 7 7 7 8 XD6 XD3 XD7 XD4 XD5 Watertight Corrosion-Resistant 4 / 2 4 2 1 / / / 2 2 2 1 1 1 / / / 1 1 1 1. Axial expansion/contraction. 2. Angular misalignment. 2 1 2 Ordering Information Hub Size Cat. # 1 1 6 4 5 Dimensions In Inches: Hub Size 1 1- 1 2 2 3 3 XD HDG " 4 / 3 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright " 4 / 3 iron alloy ® – electrogalvanized Feraloy 2. Angular misalignment of the axes of the coupled conduit runs 2. Angular misalignment of the axes of the coupled in any direction to 30° conduit runs in 3. Parallel misalignment of the axes of coupled any direction to 1. Axial expansion or contraction up to collapsing or fracturing the conduit, and damaging the wires it collapsing or fracturing the conduit, and damaging contains: smooth insulated wireway for protection of wire insulation smooth insulated wireway for protection of wire points of the protects the grounding strap and the attachment hubs continuity Feraloy bushings) Certifications and Compliances: • UL Standard: 514B Applications: indoors, outdoors, buried XD couplings can be installed in concrete in non-hazardous areas. underground, or embedded rigid conduit or PVC rigid conduit. (PVC XD's are used with standard nipples and rigid metal-to-PVC conduit requires rigid metal conduit a flexible and watertight connection for adapters.) XD's provide systems from damage due to movement. protection of conduit wiring Typical applications include: • feeder runs Underground conduit • of concrete subject to relative movement Runs between sections • structures Runs between fixed • Conduit entrances in high-rise buildings • Bridges • Marinas, docks, piers XD Expansion/Deflection Coupling Expansion/Deflection XD Features: • movements without XD couplings accommodate the following • position and provides a Inner sleeve maintains constant I.D. in any • is corrosion resistant and Watertight flexible neoprene outer jacket • assure grounding Tinned copper flexible braid grounding straps • and corrosion resistance Stainless steel jacket clamps for strength • rigid conduit Standard tapered electrical threads fit standard •of conductors Integral hub bushing protects insulation Standard Materials: Standard • Hubs – • Outer jacket – molded neoprene • Jacket clamps – stainless steel • Inner sleeve – molded plastic • Grounding straps – tinned copper flexible braid Standard Finishes: Standard • • Neoprene – natural (black) • Molded plastic – natural (brown) Size Ranges: • 1" to 6" (Smaller sizes can be obtained by using reducing Options: DescriptionHot dipped galvanized Suffix 5F 130 • Reducer Vellum • Gasket Copper-freealuminum-natural • Steel-electrogalvanized • Washer • Copper-freealuminum-natural • Steel-electrogalvanized • Body Finishes: Standard Materialsand WetLocations • NEMAFB1 • NECArticles250-77and300-7(b) • CSAStandard:C22.2No.18 • ULStandard:514B • Compliances: Certifications and • Gland Nut Copper-freealuminum-natural • Teflon • Packing Copper-freealuminum-natural • •1 •1 Withoptionalredundantvisible • Inconduitrunstopreventdamage • Inconduitrunsthatcrossstructural • Indoorsoroutdoorswhereconduit • Onlongconduitrunstoprevent • Inlongconduitrunstopermitlinear • Tocoupletogethertwo(2)sectionsof • Withouttheneedforanexternalbonding • rigid metalconduitandIMC: XJG expansioncouplingsareusedwith Applications: + 6"only) 1 1 Feraloy electrogalvanized andaluminumpaint electrogalvanized andaluminumpaint grounding strap on abridge conduit supportssuchasinabuildingor joints temperature ranges expansion occursandtherearewide from bucklingandensuingcircuitfailures and contraction movement causedbythermalexpansion movement conduit subjecttolongitudinal jumper andclamps(upto4") / / 2 2 1 1 5F " through1"-Steelelectrogalvanized " through1"-Steelelectrogalvanized / / 4 4 " through6"- " through6"- ® ® (trademark ofE.I.DuPontCo.) iron alloy-electrogalvanized(5" www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Feraloy Feraloy For RigidMetalConduitandIMC With InternalGrounding XJG ConduitExpansionJoints ® ® iron alloy- iron alloy- • Bushing Malleableiron–electrogalvanized • U-Bolts Braidedtinnedcopper • Ground Strap Phosphorbronze-electrogalvanized • Ground Springs Copper-freealuminum-natural • •1 • Size Ranges: 4"and8"maximumconduit movement • ecito Suffix order separately(BJSeries) for visibleindicationofgrounding– Available withredundant†groundstrap Hot dippedgalvanized Not availableon5"and6"sizes Available incopper-freealuminum Description Options: ‡XJ128 andXJ148arenotinternallygrounded.Apairof36"bondingjumpersprovidedwithfitting. External groundstrapsofferaredundantpathandeasyvisibleindicationofground. †XJG expansioncouplingsuseametallicbushingandgroundspringstocreatehighintegrityinternalconnection. 3 1 Size Conduit Ordering Information 68 58 4 3 3 2 2 1 1 1 / / 4 2 1 1 1 1 / / / / 1 electrogalvanized andaluminumpaint 1 / / 2 2 2 4 2 2 1 " through1"-Steelelectrogalvanized " through6"conduitsize / 4 " through6"- oeetCt # Cat. Movement Conduit Maximum 4 4 4 4 8 4 8 4 8 4 8 4 8 4 8 8 8 4 8 8 Feraloy © ® 2013 Eaton’sCrouse-Hinds Business J5 BJ54 XJG54 BJ44 XJG44 BJ24 XJG24 BJ14 XJG14 J4‡— XJ148‡ — XJ128‡ BJ108 BJ104 XJG108 BJ98 XJG104 BJ94 XJG98 BJ88 XJG94 BJ84 XJG88 BJ78 XJG84 BJ74 XJG78 BJ68 XJG74 BJ64 XJG68 BJ58 XJG64 XJG58 BJ48 XJG48 BJ38 BJ34 XJG38 BJ28 XJG34 XJG28 BJ18 XJG18 iron alloy- Patented Design Jumper† Bonding Optional HDG SA Wet Locations In Inches: Dimensions Diameter A .878 24" 24" 7.87 7.56 3.68 20" 3.19 20" 6.75 6.75 2.12 1.75 .61.0— — 16.00 36" 30" 15.50 13.81 36" 30" 9.81 9.56 13.81 36" 7.64 9.81 30" 6.62 14.00 36" 6.62 24" 10.00 6.62 13.31 30" 6.62 24" 9.31 5.37 12.25 30" 5.37 8.25 4.87 11.87 30" 4.87 4.75 11.56 30" 4.75 20" 3.68 11.25 30" 7.25 3.19 10.75 30" 2.43 10.75 2.43 2.12 1.75 XJG shownwithoptionalbonding jumper Length B Length Jumper Bonding 5F 131 5F " " " " " " " " " 2 4 8 4 4 4 2 4 2 / / / / / / / / / 1 3 7 1 1 3 1 1 1 B Length "11 "15 "18 "19 "21 "21 "10 ""15 11" "15 4 8 8 8 8 4 8 16 8 8 " through 4" conduit size / / / / / / / / / / 3 7 3 5 5 3 1 7 1 5 2 2013 Eaton’s Crouse-Hinds Business / A Diameter 1 2 2 3 3 4 6 5 6 4 1 © • movement 4" maximum conduit Size Ranges: • Optional Bonding Jumper XJG14 EMT BJ14 XJG24 EMT BJ24 XJG34 EMT BJ34 XJG44 EMT BJ44 XJG54 EMT BJ54 XJG74 EMT BJ74 XJG94 EMT BJ94 XJG84 EMT BJ84 XJG104 EMT BJ104 XJG64 EMT BJ64 XJG shown with optional bonding jumper Maximum Conduit Movement Cat. # "4" "4" "4" "4" 4 2 2 2 / / / / "4" "4" 1 1 1 1 2 4 / / 1" 4" Conduit Size 1 3 2 3"3 4" 4" 4" 1 1 2" 4" Options: ground strap Available with redundant† grounding – order for visible indication of separately (BJ Series) Ordering Information Ordering †XJG expansion couplings use a metallic bushing and ground springs to create a high integrity internal ground connection. External ground straps offer a redundant ground path and easy visible indication of ground. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright iron alloy - iron alloy - iron alloy - ® ® ® Feraloy Feraloy Feraloy (trademark of E.I. DuPont Co.) ® " through 4" - " through 4" - " through 4" - 4 4 4 / / / " through 1" - Steel - electrogalvanized " through 1" - Steel - electrogalvanized " through 1" - Steel - electrogalvanized 1 1 1 2 2 2 / / / electrogalvanized and aluminum paint electrogalvanized and aluminum paint electrogalvanized and aluminum paint 1 1 1 jumper and clamps movement conduit subject to longitudinal expansion movement caused by thermal and contraction circuit failures from buckling and ensuing expansion occurs and there are wide temperature ranges conduit supports such as in a building or on a bridge grounding strap •1 •1 •1 Ground Springs Ground • Phosphor bronze - electrogalvanized Strap Ground • Braided tinned copper U-Bolts • Malleable iron – electrogalvanized Gland Nut • Packing • Teflon Body • Steel - electrogalvanized • Copper-free aluminum - natural Reducer • Standard Materials and Standard Finishes: Washer • Steel - electrogalvanized Gasket • Vellum Bushing • Certifications and Compliances: • UL Standard: 514B • CSA Standard: C22.2 No. 18 • NEC Articles 250-77 and 300-7 (b) • NEMA FB1 Applications: are used with XJG expansion couplings EMT Conduit: • an external bonding Without the need for • two (2) sections of To couple together • to permit linear In long conduit runs • to prevent conduit On long conduit runs • Indoors or outdoors where conduit • In conduit runs that cross structural joints • In conduit runs to prevent damage to • With optional redundant visible XJG-EMT Conduit Expansion Conduit XJG-EMT Grounding With Internal Joints Conduit For EMT 5F 132 Inconduitrunstopreventdamage • Inconduitrunsthatcrossstructural • Indoorsoroutdoorswhereconduit • Inlongconduitrunstoprevent • Tomaintainagroundconnectionwithout • Tocoupletogethertwo(2)sectionsof • Toaccommodateaxialexpansion, • rigid metalconduitandIMC: XJGD combinationfittingsareusedwith Applications: • Standard Finishes: GroundStraps–tinnedcopperbraid • InnerSleeve–moldedplastic • JacketClamps–stainlesssteel • OuterJacket–moldedneoprene • GroundSpring–phosphorbronze • Gasket–vellum • Packing–Teflon • Body,Hubs,GlandNut,Washer, • Standard Materials: ULStandard:514B • Compliances: Certifications and on abridge conduit supportssuchasinabuildingor joints temperature swings expansion occursandtherearewide from bucklingandcausingcircuitfailures and clamps the needforanexternalbondingjumper movement conduit subjecttolongitudinal misalignment angular misalignmentandparallel Feraloy Bushing – 5F ® – electrogalvanized www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Feraloy ® ® Internally Grounded and ExpansionJoint Expansion/Deflection Coupling XJGD Combination Ordering Information "4" 1" "4" 4" 4" 4" 3 3" 2 2" 1 1 Hub Size 1 1 1 1 / / / / 2 2 2 4 "4""4""4""4" oeetCt # Cat. Movement Conduit Maximum © XJGD34 XJGD94 XJGD74 XJGD54 XJGD44 XJGD104 XJGD84 XJGD64 2013 Eaton’sCrouse-Hinds Business 3 Diameter A 6 5 4 4 "27 8" 5 4 1 15 5 15 1 1 15 / / / / 2 16 2 4 / / / "2116 16 "18"1816 Wet Locations "20 "21"19 "17 Length B 3 5 5 3 1 5 1 3 / / / / / / / / 4 8 8 4 4 8 8 4 " " " " " " " " 5F 133 8 5F / 1 64 4 32 16 16 16 16 16 4 / / / / / / / / / 1 9 1 9 7 7 7 7 7 3 8 32 16 4 4 4 4 4 16 16 / / / / / / / / / / 1 1 5 3 1 1 1 5 1 5 16 16 / / 8 8 8 16 16 16 / / / / / / 3 5 3 13 7 1 11 1 1 1 1 2 2 3 4 4 5 2013 Eaton’s Crouse-Hinds Business © 4 16 8 16 2 8 4 4 4 / / / / / / / / / 1 9 7 5 1 5 1 3 1 1 1 2 2 32 3 4 4 5 HUB1 HUB2 HUB3 HUB4 HUB5 HUB6 HUB7 HUB8 HUB9 HUB10 16 / 8 8 2 8 16 16 16 16 / / / / / / / / 1 3 1 5 11 3 7 7 9 11 1 1 1 2 2 1 1 2 2 4 2 2 2 / / / / 1 1 1 1 2 4 / / 1 1 1 2 2 3 3 4 Conduit Size a b c d x 1 3 Cl. I, Div. 2, Groups A, B, C, D Watertight 4 2 2 2 / / / / 1 1 1 1 2 4 HUB2 HUB3 HUB4 HUB5 HUB6 HUB7 HUB8 HUB9 HUB10 Cat. # HUB1 / / Ordering Information Ordering Conduit Size1 3 Cat. # 1 1 1 2 2 3 3 4 Dimension "x" is maximum wall thickness of box that will meet the requirement for three full Dimension "x" is maximum wall thickness of box that will meet box connector or rigid threads engagement of nipple and fitting body when liquidtight conduit hub is installed in a knockout or slip hole. Dimensions In Inches: www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright " to 4". 2 / 1

iron alloy – electrogalvanized

" to 4" " to 4" malleable iron 2 2 Class I, Division 2, Groups A, B, C, D Per NEC 501-4(b), 502-4(a) and 503-3(a) / / Feraloy and aluminum acrylic paint wire pulling and protection for conductors during installation. watertight seal. of conduit. installing a threaded conduit hub on a installing a threaded conduit junction box or device enclosure metal or cast enclosure indoors or IMC, steel or aluminum; outdoors 1 1 Standard Finishes: Standard • Size Ranges: • Standard Materials: Standard • Certifications and Compliances: • UL Standard: 514B • CSA Standard: C22.2 No. 18 • NEC/CEC: Features: • provides easier Smooth insulated throat • Neoprene sealing gasket provides a • Compact design permits close spacing • Wide range of sizes from HUB Conduit Hubs: • means for Provide a convenient • conduit to a sheet Are used to connect • rigid conduit or Are used with threaded Applications: (Also see Myers Hubs see page Myers Hubs see (Also see 211) Conduit Hubs Conduit 5F 134 Assuresalastingbond.Prongsonstrap • Ispliable,strongandcorrosionresistant • GC strap: Lockwasheronstudtomaintaingood • Integralcableclamptoprevent • Substantialcliptensionforgrounding • GCT groundingconnectorandstudshave: Corrosionresistantmaterial • Coverattachedtoreceptaclebychain • GCgroundingstrapandclampare • GCTgroundconnectorandstudsare • GCRgroundingreceptaclesareusedto • Applications: Flexiblecopperstrap– tinned • Bronze,brass,aluminumparts–natural • Standard Finishes: Clamp–brass • Strap–flexiblecopper • GCT–Bronzeconnectorbody; • GCR–Bronzebody,capandchain; • Standard Materials: CSAStandard:C22.2No.41 • ULStandard:GCstrapandclamps–467 • Compliances: Certifications and Threadatbottomforattachingto • Groundingstuddesignedtoaccept • Groundingstudintegralwithhousing • GCR groundingreceptacleshave: Features: preventing slippage. clamp engagestrapperforations, electrical contact fraying atconnector from breakingfreeofconnectoror prevent lossofcover threaded groundingrod requirements. equipment, andappliancesperNEC meter circuits,serviceentrance equipment inwiringsystems,suchas suitable forbondingandgrounding portable cable. electricity groundingconnectionswith used toprovide"quick-connect"static floors andairportaprons. not limitedto,useinaircrafthangar connections; particularlysuitedfor,but provide staticelectricitygrounding aluminum cableclamp;brassstud brass groundingstud standard batteryclip 5F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Straps andClamps Grounding Devices 3 / 4 " In Inches: Dimensions GC Grounding Strap GCT Stud* GCT Grounding Connector ecito a.# Cat. 50' coil,1"wide Description Used withGC102StrapClamp receptacle. *Not areplacementforgroundingstudinGCR Brass Description # Cat. .312" to.406" Cable Dia. ieCt # Cat. Size Thread 3 / 8 - 16 © 2013 Eaton’sCrouse-Hinds Business GC100 GCT8 GCT2 GCR For StaticElectricityGrounding GCR Receptacles Strap Clamp Brass ecito hedSz a.# Cat. chain Thread Size With capand Description ecito a.# Cat. Description 5 / 16 - 18 GC102 GCR210 5F 135 5F Replacement Cover Cat. # Replacement Cover Cat. # " size 2 / 1 F435F535F636 5 NL 5 NL CF60 F235F335 5 H 5 NS F686F766F866 CF60 F966 CF707 F1066 CF707 CF708 CF708 F186F285F385 CF690 F485 5 H F585 5 NS 5 NL 5 NL 64 / 64 55 / 55 32 / 32 2013 Eaton’s Crouse-Hinds Business / 21 21 © 16 16 / / 3 3 and 1 – and 1 – 64 / 64 and 1 – 61 / and 1 – 61 16 / 16 9 / 9 " – 2" size and 1 – 1 and 1 – 1 , 1 – 4 / , 1 – 64 3 / 16 16 1 / / 64 , 1 – 5 5 / ,1 – 1 16 16 / / 11 11 16 / 4 8 8 / 8 8 11 3 / / 32 2 / / 32 2 , 1 – 1 5 5 / / 5 5 / / , 1 – 1 , 1 – 1 1 3 4 1 , 1 – 1 32 13 13 / 16 16 , 1 – 7 / / , 1 – 32 dia. dia. dia. × × 7 7 / dia. 16 16 dia. 4 / 17 / / 32 64 32 16 1 13 / / / / 2 16 13 / / 1 31 15 19 3 13 1 2 2 3 7 1 10 and 3 – and 3 – and 3 – and 3 – , 1 – 1 and 3 – and 3 – , 1 – , 1 – 1 , 1 – 1 and 3 – and 3 – 16 4 4 64 64 , 1 – / / / , 1 – 16 64 64 / / 8 8 16 7 3 3 / / / 8 32 8 16 / / / / / / / 27 27 7 3 7 7 17 9 3 7 27 27 2 – 2 – 2 – 2 – 3 – 1 6 – 2 – 2 – 2 – " size 2 / 1 4 2 4 2 2 2 / / / / / / 1 1 4 1 1 1 1 2 4 / / / 22 – – 1 22 12 – – 12 1 Conduit Size3 Number and Dia. of Cover Knockouts Cat. # 32 – 1 1 – – 2 32 3 43 12 – – – 12 1 1 22 Conduit Size1 3 Number and Dia. of Cover Knockouts Cat. # 5 H 5 NS 5 NL CF60 CF707 Cat. #CF690 Dim. CF708 Overall Dimensions of Replacement Covers Overall Dimensions of Replacement for F Series Service Heads Clamp Type Rigid or EMT Threadless F Service Heads Threaded Rigid Threaded www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

conduit. with variety of sizes and numbers of wires. insulating knockout cover. buildings conduit and threadless thinwall (EMT) rigid conduit masts Standard Materials: Standard • Copper-free aluminum Finishes: Standard • Natural Certifications and Compliances: • UL Standard: 514B • CSA Standard: C22.2 No. 18 Features: Two types available: • to conduit. Threaded rigid – threads • EMT – clamps to Threadless rigid or • Available knockouts in covers allow use • Simple construction and easy assembly. • Consists of only two pieces plus the • Easy to install. Applications: heads are used: F type service entrance • entrance to For overhead service • threadless rigid or With threaded rigid,

Replacement Covers Replacement Service and Heads Entrance 5F 136 Quickandeasytoinstall. • Moldedribsensureatightfit,preventingthelinerfromslidingout • Spacesaving. • Smoothflangeprovidingeasywirepullingandprotectsconductors • Corrosionandheatresistantpolypropylenematerial. • Noneedforthreadedbushings,reducers,orspecialmachining. • ULlistedandCSAcertified. • Features: Regardlessofwheretheconduitendsinrelationto • Enteringanenclosureverticallyorhorizontally. • Enteringdrilledandtappedopeningsorslipholes. • Withthinwallorthickenclosures. • Toprovideasmoothwireentryfromconduitintoenclosuresto • LNR conduitlinersareinstalledinrigidmetalorIMC: Applications: • Sizes: Natural(clear) • Standard Finishes: Polypropylene • Standard Materials: U.S.PatentNo.5,383,688 • CSAStandardC22.2No.18 • ULStandard514B • NECArticle346-8 • Certifications andCompliances: 1 while conductorsarebeingpulled. being installed. enclosure wall. protect wiresfromabrasionastheyarepulled. / 2 5F " through4" www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright LNR ConduitLiner In Inches: Dimensions LNR6 LNR10 LNR9 LNR7 LNR5 LNR2 LNR4 LNR3 a.#Sz D C B A Size LNR1 # Cat. Ordering Information LNR8 © 2013 Eaton’sCrouse-Hinds Business "2 2" "2 1 1" "3 4" 3 2 1 "2 3" 3 1 / / 4 2 1 1 1 1 "1 "1 / / / / 2 2 2 4 "3 "2 "2 "2 1 7 7 9 9 1 1 9 3 1 / / / / / / / / / / 16 8 8 16 16 16 16 16 16 16 "3 "2 "4 "2 "2""1 1 "1 "1 " "4 7 / 8 1 9 7 7 3 3 1 9 " / / / / / / / / 16 16 16 16 4 8 8 16 "1 "1 " "3 "3 "2 "2 "4" 3 13 5 / 8 / 9 1 1 1 5 3 1 16 " / / / / / / / 16 16 4 16 8 8 16 " "1 "1 " "3 "2 "1 " 7 3 9 / / / 8 4 16 3 7 7 7 1 7 " " / / / / / / 8 8 8 8 16 4 " " " " " " " 6F 137 6F Page No. see page 138 see page 144 see page 145 see page 147 see page 140 see page 149 see page 140 see page 142 see page 143 see page 146 see page 145 see page 148 see page 141 see page 142 see page 150 see page 158 see page 159 see page 158 see page 157 see pages 151–154 see pages 155–156 see pages 155–156 see pages 155–156 2013 Eaton’s Crouse-Hinds Business ©

A SpeedSeal™ X ® ® ® EYD Series EZD Series EYDX Series EYS ES Series EYS Series EYS Series with ATEX EYSA Series EYSX Series EZD Series EYSR Series EZS Series EZS Series with ATEX Ultra High Pressure Seal Secondary Process Seal Assembly with Rupture Sensor ECD Series CD Series (Non-hazardous) ECD Series Chico Chico Chico EYS Tool Kit Standard Elbows Horizontal/Vertical Inspection Retrofit Universal Universal Drains Sealing Fiber Kit Sealing Fittings Tool Application/Selection Drains & Breathers Description Secondary Process Seals Secondary Process Sealing Compound Seals www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

Hazardous Conduit Seals,Conduit and Drains Breathers 6F 138 Frequentlythearrangementofraceway • Drainsareusedinhumidatmospheres • Drains: Breathers(vents),areinstalledinthetop • Breathers: WhilenotaNationalElectricalCode • Sealsareinstalledinconduitrunsto • Seals: Applications: Selectasealingfittingfortheproperuse • Selecttheappropriatesealfornewor • Selectthepropersealingfittingfor • Seals: Selection: Considerations for position oftheseal. any sealisdeterminedbyvolume,hubsizeand mounting The amountof accumulations ofwaterabovetheseal. used. Thesefittingspreventharmful or EYDdrainsealfittingsshouldbe not impossible.Insuchinstances,EZD runs makesthismethodimpracticalif it maypassoutthroughECDdrains. seals, butwillbeledtolowpointswhere water willnotcollectinenclosuresoron raceways shouldbeinclinedsothat of enclosuresorraceways.The water cangainentrancetotheinteriors or inwetlocationswhereitislikelythat minimize condensationinenclosures. of enclosurestoprovideventilation "pressure piling." conduit size,tominimizetheeffectsof than 50'to100'apart,dependingonthe conduit runsbyinsertingsealsnotmore good practicetosectionalizelong requirement, manyengineersconsiderit precompression or"pressurepiling." enclosure andpreventing conduit, limitinganyexplosiontothe installation toanotherthroughthe flames fromoneportionoftheelectrical prevent thepassageofgases,vaporsor mounting. position; othersarerestrictedtovertical seals aredesignedtobemountedinany to enteranon-hazardousarea.Some another portionofthehazardousareaor seal andpermitthemtoescapeinto vapors toenterthesystembeyond of asealmaypermithazardousgasesor hazardous areas.Improperpositioning runs betweenhazardousandnon- particularly criticalwhentheconduit in respecttomountingposition.Thisis retrofit installations. Division 1&2,GroupsA,B,CorD. hazardous vaporinvolved;i.e.,ClassI, 6F Chico www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright ® fiber andcompoundrequiredfor odi el,BreathersandDrains Conduit Seals, Application andSelection Inviewofthislikelihood,itistherefore • Inlocationswhichareusually • Drains: installing donotindicatetheirneed. prevailing atthetimeofplanningor inspection seals,eventhoughconditions installing breathers,drainseals,or subsequent insulationfailuresby water accumulationsandprobable good practicetoinsureagainstsuch and wateraccumulation. "breathing," resultingincondensation where theconduitisinstalled,willcause the processcarriedoninlocation weather changesorduetothenatureof and/or inbarometricpressure,dueto increases anddecreasesintemperature therefore, itmay"breathe".Alternate systems. Noconduitsystemisairtight, water frequentlycollectinconduit considered dry,surprisingamountsof Z oiotlsa EYSRRetrofit seal EZS Horizontalseal © 2013 Eaton’sCrouse-Hinds Business EYS Horizontalseal ecito Suffix Corro-free Description Options: EYS 1Vertical sealing ™ epoxypowdercoat S752 6F 139 see see 6F page 141 page 147 EZS EYDX see see Vertical Vertical Vertical All 90° turn Vertical and Horizontal Vertical and Horizontal Vertical and Horizontal For Conduit Angle page 144 page 146 2013 Eaton’s Crouse-Hinds Business © EYSX Series Page Series Page EYSR see see page 144 page 158 2 EYD ECD Universal Series Page see page 158 Certified to CSA Standards through QPS Class I, Div. 1 & 2, Groups B, C, D Class I, Zone 1 & 2 IIB + H Class II, Groups F, G Class I, Groups B, C, D Class II, Groups F, G Class I, Groups C, D Class II, Groups E, F, G Class I, Groups B, C, D Class II, Groups E, F, G Class III Class II, Groups F, G Class II, Groups E, F, G Class II, Groups E, F, G Class II, Div. 2, Groups E, F, G Class III Class I, Groups B, C, D Class II, Groups E, F, G Class II, Groups E, F, G Class II, Div. 1 & 2, Groups E, F, G NEC Group Hazardous ECD Standard see see www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright page 149 page 145 ES see see Secondary Process Seal with Rupture Sensor Expanded Fill Sealing Fittings and Drain Inspection Seal and Drain – Inspection Seal only Standard Breather only Drain only Universal Drain – BreatherNon-hazardous Drain Ultra High Pressure Seal Class I, Groups C, D Class I, Div. 1, Groups B, C, D SealSealing HubSeal and Drain Class I, Groups C, D Class I, Groups B, C, D Ex II 2 G EEx d IIC Vertical All Retrofit Seal/Drain Seal* Class I, Div. 2, Groups C, D Expanded Fill Sealing Fittings Seal Class I, Groups C, D Elbow Seal Class I, Groups C, D SealSeal Ex II 2 G EEx d IIC Flameproof, Exd, IIC and Horizontal Vertical Vertical and Horizontal Seal Groups A, B, C, D Class I, page 140 page 140 EZD SPSR EYDX EZD ECD ECD CD UHPS EZS ATEX ES EYD EYSR EYSX EZS EYS 29 EYS ATEX EYSA *Drain purchased separately. SeriesEYS Description Series Page Series Page Series Page EYS / EYSA Quick Selector Chart EYS Elbow Seal Conduit Seals,Conduit and Drains Breathers Chart Shape Selector Chart Quick Selector 6F 140 Bodies– • Standard Materials: Removablenipples –steel • Plugs– • CSAStandard:C22.2 • ULStandard:1203 • NEC/CEC: • Certifications andCompliances: the compound. opening forsealingcompoundcanbeproperlypositionedtoaccept EZS sealingfittingsforinstallationatanyangle;thecoverswith or inbothhorizontalverticalpositions. EYS sealingfittingsareavailableforinstallationineitherverticalonly Taper-tappedhubstoensuregroundcontinuity • Integralbushingsinconduithubstoprotectconductorinsulation • Largeopeningswiththreadedclosurestoprovideeasyaccess • Minimumturningradius • EYS andEZSsealingfittingsinclude: Features: Incablesystemswhenthecableseitherdonothavea • InconduitsystemswhenleavingClassI,Division1or2 • Ateachconduitentranceof2"sizeorlargertoanenclosure • Ateachentrancetoanenclosurehousingarcingorsparking • Sealing fittingsarerequired: Limitprecompressionorpressure"piling"inconduitsystems • Limitexplosionstothesealedoffenclosure • Restrictthepassageofgases,vaporsorflamesfromoneportion • EYS andEZSsealingfittings: Applications: 6F Chico A Sealing fittingsareapprovedforuseinhazardous locationsonlywhen Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsF,G Class I,Division1&2,GroupsC,D EZS1-8, 16-86 EYS29, 4-014,46-0146 Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsB,C,D EYS41-101, 416-1016 Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsA,B,C,D EYS1-3, 11-31,16-36,116-316 from damage conduit hubsformakingdams the ClassI,Division1or2hazardouslocations gases orvaporsthroughthecablecorewhenthosecablesleave gas/vaportight continuoussheathorarecapableoftransmitting hazardous locations practicable and,innocase,morethan18"fromsuchenclosures Division 1hazardouslocations.Tobelocatedasclose fitting housingterminals,splicesortapswhenusedinClassI, 18" fromsuchenclosures To belocatedasclosepracticableand,innocase,morethan device whenusedinClassI,Division1and2hazardouslocations. normal ambienttemperatures of theelectricalinstallationtoanotheratatmosphericpressureand sealing compoundorChicoSpeedSealareused tomaketheseal. Feraloy Feraloy www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright iron alloyand/orsteel ® iron alloyand/orductile n ie e ae 155–156 and Fiberseepages Chico SealingCompound Conduit SealingFittings Chico ® X fiber and Steel–electrogalvanized • • Standard Finishes: ecito Suffix • Size Ranges: Copper-free aluminumbodies,nipplesandenclosures Description Options: 6 ‡With coverremoved. 3 3 2 2 1 1 EYS 46Series 5 4 ieab 1 a 1 Size EYS 16Series Dimensions (InInches) 3 Ordering Information-EYS / / 3 *Available incopper-freealuminum–toorder,addsuffixSACat.No. 3 2 2 1 3 1 For SealinginVertical orHorizontalPositions Size Hub 4 1 1 1 3 1 Size Hub For SealinginVertical PositionsOnly / / / / 4 2 1 1 1 1 4 2 4 2 / / / / 1 1 1 1 © l III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. D II, C, Cl. B, Groups A, 1&2, Div. I, Cl. / / / / aluminum acrylicpaint Feraloy 2 2 2 4 1 / 2 2 2 4 2 2013 Eaton’sCrouse-Hinds Business " –6" Vertical female 12 8 6 11 9 7 5 5 9 3 3 1 1 1 1 1 Y8 EYS816 EYS81 Y6 EYS616 EYS61 a.# Cat. Female Hub Y9 EYS916 EYS716 EYS516 EYS91 EYS416 EYS71 EYS216* EYS51 EYS116* EYS41 EYS21* EYS11* Y11EYS1016 EYS101 EYS316* EYS31* / / / / / / / 4 3 3 4 16 2 2 4 2 16 1 1 / / 5 12 9 Y3 EYS36* EYS26* EYS16* EYS3* EYS2* EYS1* u a.# Hub Cat. Female 8 16 / / iron alloyandductile–electrogalvanized 16 32 / 16 7 6 5 4 4 3 32 2 2 1 1 1 5 1 1 3 1 1 7 3 / / / / / / / / 3 1 1 8 2 4 4 4 2 16 16 / / / 4 2 4 Vertical aisab a Radius Turning 2 1 1 male & female 5 4 3 3 3 2 2 1 u a.# Hub Cat. Male &Female 3 29 5 / / 11 19 11 7 5 11 5 1 23 u a.#Vria Horizontal Vertical # Hub Cat. Male &Female / / / / 8 8 / 16 16 16 16 / / 32 / / / 16 32 32 32 16 ‡9 ‡ ‡ ‡9 Vertical or horizontal EYS 116Series EYS 116Series 4 3 3 8 7 6 5 5 female 5 11 11 3 3 1 1 1 1 1 / / / / / / / / 16 / / 4 16 2 2 4 2 16 3 2 1 Volume inCubicInches Approximate Internal 16 16 3 / 4 Dust-Ignitionproof Explosionproof 664 56 922 19 Inches Volume inCubic Approximate Internal 282 72 25 10 68 22 11 5110 95 33 5 4 4 3 32 2 2 1 1 1 1 3 1 3 1 1 7 3 / / / / / / / / 2 4 3 1 1 4 4 4 2 16 16 / / / 4 2 4 male &female Radius Turning 1 1 1 3 3 3 2 2 1 3 1 5 11 7 5 11 5 1 23 / / / Vertical or horizontal / / / / 8 4 32 30 12 16 16 16 16 / / / 16 32 16 3 ‡ / ‡ 4 1 3 1 / / / 2 4 4 SA 6F 141 6F 32 / 8 8 8 16 32 8 8 / / / / / / / 7 7 1 5 11 9 3 7 1 1 2 3 3 3 Turning Radius† 4 2 2 EZS Series / / / 2 2 4 16 16 8 1 1 1 4 2 / / / / / / / / 1 1 1 3 3 7 1 1 2 2 32 32 3 5 5 5 6 6 10 12 14 32 32 32 32 / / / / 8 8 16 2 / / / / 5 5 31 13 9 13 27 1 3 3 3 4 4 5 5 6 4 2 2 / / / 1 1 1 4 2 16 16 / / / / 16 16 16 16 16 8 1 1 / / / / / / 3 3 15 1 3 1 15 5 10 46 46 6 6 12 14 5590 55 90 Approximate InternalApproximate in Cubic Inches Volume Explosionproof Dust-Ignitionproof 4 4 5 5 7 4 7 8 2013 Eaton’s Crouse-Hinds Business 4 2 2 / / / © 1 1 1 2 4 / / EYS Elbow Seal 3 1 1 1 1 2 2 3 †With cover removed. EZS Series Size a b c Male & female hub Male & Female Hub Cat. # Vert. Horiz. EZS3 EZS36 EZS6 EZS66 EZS1EZS2 EZS16 EZS4 EZS26 EZS5 EZS46 EZS7 EZS56 EZS8 EZS76 EZS86 Female Hub Cat. # EYS 46 and 4 2 2 / / / 1 1 1 EYS 116 Series 2 4 / / 3 1 1 1 1 2 2 For Sealing at Any Angle 3 Hub Size Ordering Information - EZS Ordering 8 / 7 Turning Radius Turning (Vertical) 1 4 / 3 1 Cl. I, Div. 1 & 2, C, Groups D Cl. II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III 16 / 11 4 4 2 3 / / / 1 3 1 EYS 16 Series 12 30 4 / EYS Elbow Seal Size a3 b Dimensions In Inches 4 2 / / 3 1 200 222 290 315 95 110 56 64 19 22 68 10 25 72 82 Approximate InternalApproximate Volume in Cubic Inches www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright Male & Female Hub Cat. # Vert. Horiz. 4 / 3 Approximate Internal Volume in Cubic Inches 1 Elbow seal

Vertical or horizontal male & female Vertical EYS012 EYS0126 EYS014 EYS0146 EYS10* EYS106* EYS8* EYS86* EYS6* EYS66* EYS9* EYS96* Female EYS4*EYS5* EYS46* EYS7* EYS56* EYS76* Hub Cat. # EYS29

2 4 2 2 / / / / 1 1 1 1 4 / Hub Size3 Cat. # For Sealing in Vertical Positions For Sealing in Vertical 5 6 4 3 3 For Sealing in Vertical or Horizontal Positions For Sealing in Vertical 2 2 1 Hub Size 1 EYS Chico Sealing Compound Chico Sealing see pagesand Fiber 155–156 *Available in copper-free aluminum – to order, add suffix SA to Cat. No. *Available in copper-free aluminum – to order, add suffix SA to Ordering Information - EYS Ordering Conduit Sealing Fittings Sealing Conduit 6F 142 the compound. opening forsealingcompoundcanbeproperlypositionedtoaccept EZS sealingfittingsforinstallationatanyangle;thecoverswith or inbothhorizontalverticalpositions. EYS sealingfittingsareavailableforinstallationineitherverticalonly Taper-tappedhubstoensuregroundcontinuity • Integralbushingsinconduithubstoprotectconductorinsulation • Largeopeningswiththreadedclosurestoprovideeasyaccess • Minimumturningradius • EYS andEZSsealingfittingsinclude: Features: Incablesystemswhenthecableseitherdonothavea • InconduitsystemswhenleavingClassI,Division1or2 • Ateachconduitentranceof2"sizeorlargertoanenclosure • Ateachentrancetoanenclosurehousingarcingorsparking • Sealing fittingsarerequired: Limitprecompressionorpressure"piling"inconduitsystems • Limitexplosionstothesealedoffenclosure • Restrictthepassageofgases,vaporsorflamesfromoneportion • EYS andEZSsealingfittings: Applications: eisMutn ieto u ieCt # Cat. HubSize Vertical MountingDirection EYS Series Ordering Information: Z oiotl1"NPT 1"ISO 1"ISO Horizontal Horizontal Horizontal EZS EZS Vertical EZS Vertical EYS EYS Y oiotl2"NPT Horizontal Horizontal EZS EYS Y etcl1"NPT Vertical EYS Y oiotl1 Horizontal EYS from damage conduit hubsformakingdams the ClassI,Division1or2hazardouslocations gases orvaporsthroughthecablecorewhenthosecablesleave gas/vaportight continuoussheathorarecapableoftransmitting hazardous locations practicable and,innocase,morethan18"fromsuchenclosures Division 1hazardouslocations.Tobelocatedasclose fitting housingterminals,splicesortapswhenusedinClassI, 18" fromsuchenclosures To belocatedasclosepracticableand,innocase,morethan device whenusedinClassI,Division1and2hazardouslocations. normal ambienttemperatures of theelectricalinstallationtoanotheratatmosphericpressureand 6F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright for IEC Applications Conduit SealingFittings 3 1 3 1 / / / / 4 2 4 2 1 "NPT " NPT " NPT " NPT / 2 " NPT IP67accordingtoEN60529 • IEC: • Certifications andCompliances: EYS- • Size Ranges: Removablenipples–Lightalloy,naturalfinish • Plugs–Lightalloy,naturalfinish • Bodies–Lightalloy,naturalfinish • Standard Materials: EZS- • © EC-Type examinationcertificateLOM03ATEX2108 Ex II2GEExdIIC 2013 Eaton’sCrouse-Hinds Business 1 1 / / 2 2 " –1" " –4" xI E I Zone1and2 Ex II2GEExdIIC NOR 000002220729 NOR 000002220232 NOR 000002220224 NOR 000002220216 NOR 000002220125 NOR 000002220117 NOR 000002220160 NOR 000002220168 NOR 000002220133 NOR 000002220620 EZS EYS 6F 143 6F Weight of Weight Chico X Fiber per Seal (g) 100 2 Weight of Weight Sealing Compound per Seal (g) 50100188406550 1 2 3.5 7 14 2013 Eaton’s Crouse-Hinds Business © Male & Female -501 -501 - 100 2 - 100 2 Zone 21 Zone Zone 22 EYSA2BEYSA11MB EYSA26B EYSA1MEYSA2MEYSA3MEYSA4M EYSA16M EYSA5M EYSA26M EYSA36M EYSA46M EYSA56M EYSA12MB EYSA21MB EYSA22MB Zone 1 Zone Zone 2 " BSP/3/4" BSP 4 / 20mm/1/2" BSP Ordering Information: Ordering Entry Size Female 3 20mm/20mm 25mm/25mm 32mm/32mm 40mm/40mm 50mm/50mm 20mm/3/4" BSP 25mm/1/2" BSP 25mm/3/4" BSP www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

T60ºC, IP66 to provide easy access to conduit hubs for making dams insulation from damage male and female hub style is ordered or flames from one portion of the or flames from one portion another at electrical installation to normal atmospheric pressure and ambient temperatures enclosure piling" in conduit systems housing an arcing or sparking device when used in Zone 1, hazardous locations to be located as close as practicable and in no case more than 450mm from such enclosures Zone 1 area and entering an area of lesser hazard • Bodies - copper-free aluminum • Removable nipples and plugs - brass Finishes: Standard • Body - polyurethane gray • Nipples and plugs - natural • Type of Protection: Ex d, DIP A21, • Degree of Protection: IP66 • Gas Group: IIC • Approvals: IEC Ex TSA07.0015-1 Materials: Standard Certifications and Compliances: Features: • Minimum turning radius • Large openings with threaded closures • Integral bushings to protect conductor • Removable male nipple supplied when Applications: EYSA sealing fittings: • of gases, vapors, Restrict the passage • the sealed off Limit explosions to • or "pressure Prevent pre-compression Sealing fittings are required: • to an enclosure At each entrance • In conduit systems when leaving the EYSA Flameproof Sealing Fitting Sealing EYSA Flameproof Conduit Sealing Fittings Sealing Conduit 6F 144 Applications: Removablenipples –steel • Drain–stainlesssteel • Smallclosureplug– • Closurefordrain–copper-free • Bodies,andinspectionordraincovers– • Standard Materials: CSAStandard:C22.2 • ULStandard:1203 • NEC/CEC: • Compliances: Certifications and Barrierforsealingcompoundeasily • Removablecoversforperiodic • also include: EZD drainandinspectionsealingfittings Taper-tappedhubstoensureground • Integralbushingstoprotectconductor • Largeopeningswiththreadedclosures • Draintoprovidecontinuous,automatic • EYD andEZDdrainsealingfittingsinclude: Features: 139. see page For sealingfittingsrequirements condensate aboveseal. systems topreventaccumulationof conduit runsandatlowpointsin Drain sealingfittingsareinstalledinvertical Preventprecompressionor"pressure • Limitexplosionstothesealed-off • Restrictthepassageofgases,vaporsor • sealing fittings: EYD drainandEZDinspection and/or steel aluminum orductileiron Feraloy before compoundispoured. installed afterdamsaremadeand inspection ofseals continuity insulation fromdamage for makingdams to provideeasyaccessconduithubs drainage ofcondensate piling" inconduitsystems enclosure temperatures pressure andnormalambient installation toanotheratatmospheric flames fromoneportionoftheelectrical Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsF,G Class I,Division1&2,GroupsC,D EZD10-60, 111-611 EYD1-10, 16-106, Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsB,C,D EYD11-101, 116-1016 6F ® iron alloyand/orductile www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright With Drains Conduit SealingFittings Feraloy iron alloy Ordering Information-EYD Steel–electrogalvanized • Stainlesssteel–natural • Copper-freealuminum–natural • • Standard Finishes: In Inches Dimensions Sealing Fittingsareapprovedforuseinhazardous locationsonlywhen *Available incopper-freealuminum–toorder, add suffixSAtoCat.No. †With coverremoved. §See CertificationsandCompliancesforclassification ofeachproduct. Chico SpeedSealareusedtomaketheseal. 2 2 1 3 1 4 3 3 1 1 Size Hub Female hub / / 4 2 1 1 1 1 / / / / paint electrogalvanized andaluminumacrylic Feraloy 2 2 2 4 1 / 2 " –1" EYD iron alloyandductile– 1 / 2 "EYD1 " –1" Y6 Y6*ED1EYD616 EYD61 EYD66* EYD6* Y9 Y9*ED1EYD916 EYD716 EYD91 EYD516 EYD416 EYD71 EYD96* EYD216 EYD51 EYD116 EYD41 EYD76* EYD9* EYD21 EYD56* EYD11 EYD46* EYD7* EYD26* EYD5* EYD16* EYD4* EYD2* EYD1* Y1*ED0*ED0 EYD1016 EYD816 EYD101 EYD81 EYD316 EYD106* EYD86* EYD10* EYD31 EYD8* EYD36* EYD3* a.# Cat. Hub Female female hub l III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. II, D§ Cl. C, GroupsB, 1&2, Div. I, Cl. 1 Male & © / 2 " –1" a.# Cat. Hub Female Male & 2013 Eaton’sCrouse-Hinds Business 1 / 4 " –4" a.# Cat. Hub Female Female hub 1 1 / 4 " –4" ecito Suffix EYD– • Size Ranges: nipples andenclosures Copper-free aluminumbodies, Description Options: EZD– • 3 ieab 1 1 a 1 Size EYD DrainSeal 4 3 2 2 3 1 / / 4 2 1 1 1 1 / / / / 2 2 2 4 Chico ® 9 7 5 5 3 3 4 9 6 8 a.# Cat. Hub Female Male & 1 1 X / / 3 3 1 1 1 1 1 5 11 9 2 2 / / / / / / / / / " –2" " –4" fiber and 4 16 2 2 4 2 16 16 32 / 16 Dust-Ignitionproof Explosionproof 5 4 4 3 32-2 2 2 1 1 Chico A 1 3 1 1 7 3 3 1 1 / / / / / / / / / 4 4 4 2 16 16 16 2 4 female hub sealing compoundor 1 20 75 35 10 8 2 1 105 57 3 in CubicInches VolumeInternal Approximate Male & 3- 3- 3- 2- 2- 1- 2 1 1 Radius Turning 1 3 / / 3 29 5 4 4 3 / / " –4" / 1 7 5 11 5 1 27 8 8 / 4 / / / / / 32 2 16 16 16 16 / / † 16 32 † † † † † † SA 6F 145 6F 16 16 / / 16 16 16 8 / / / / 1 3 7 5 11 11 2 2 2 2 2 3 2013 Eaton’s Crouse-Hinds Business © Explosionproof Dust-Ignitionproof 8 8 8 16 16 4 / / / / / / 3 5 7 5 9 1 3 4 4 5 2 2 2 16 / / / / 1 1 1 9 33 33 3 3 3 5 16 16 / / 16 16 16 8 / / / / 3 3 15 15 3 1 4 4 4 5 7 4 Cl. I, Div. 1 & 2, C, Groups D Cl. II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III 2 4 / / 1 1 2 4 / / 3 1 2 †With cover removed. EZD Drain and Inspection Seals Size1 a1 1 b Cover c Drain Radius† Turning Dimensions In Inches: www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 5 6 10 11 13 40 Approximate Internal Volume in Cubic Inches EZD311 EZD611 EZD111 EZD211 EZD411 EZD511 4 2 / / 1 1 2 4 / / 1 1 1 2 1 3 Hub Size Cat. # EZD With Drain Cover EZD With Drain Conduit Sealing Fittings with Fittings Sealing Conduit Cover Inspection Drain and and Fiber Compound Chico Sealing see pages 155–156 6F 146 Applications: Incablesystemswhenthecableseither • InconduitsystemswhenleavingClassI, • Ateachentranceof2"sizeorlargerto • Ateachentrancetoanenclosure • Sealing fittingsarerequired: Provide40%wirefillcapacitytoallow • Limitprecompressionor"pressure • Limitexplosionstothesealed-off • Restrictthepassageofgases,vaporsor • EYSX ExpandedFillSealingFittings: NEC/CEC: • Compliances: Certifications and or verticalpositions. available forinstallationinbothhorizontal EYSX ExpandedFillSealingFittingsare Minimumturningradius • Taper-tappedhubstoensureground • Integralbushingsinconduithubsto • Largeopeningswiththreadedclosures • A40%wirefillcapacityforexpanded • provide: EYSX ExpandedFillSealingFittings Features: Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1and2,GroupsB, C,D EYSX11 –EYSX81 Division 1or2hazardouslocations when thosecablesleavetheClassI, gases orvaporsthroughthecablecore sheath orarecapableoftransmitting do nothaveagas/vaportightcontinuous Division 1or2hazardouslocations enclosures no case,morethan18"fromsuch located asclosepracticableand,in Division 1hazardouslocations.Tobe splices ortapswhenusedinClassI, an enclosureorfittinghousingterminals, more than18"fromsuchenclosures close aspracticableand,innocase, hazardous locations.Tobelocatedas when usedinClassI,Division1and2 housing anarcingorsparkingdevice uninterrupted runsinaconduitsystem piling" inconduitsystems enclosure temperatures pressure andnormalambient installation toanotheratatmospheric flames fromoneportionoftheelectrical continuity damage protect conductorinsulationfrom for makingdams to provideeasyaccessconduithubs sealing 6F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright ie e ae 155–156 Fiber seepages Chico SealingCompoundand Sealing Fittings EYSX ExpandedFill ecito Suffix enclosures Copper-free aluminumbodiesand Description Options: • Size Ranges: Bodies– • Standard Materials: Closures– • CSAStandard:C22.2No.30 • ULStandard:1203 • Copper-freealuminum–natural • Steel–electrogalvanized • • Standard Finishes: 3 1 4 3 1 4 3 3 2 1 1 1 Horizontal Vertical 3 1 1 # Cat. Size FemaleHub Hub Horizontal Positions For SealinginVertical or Ordering Information 2 2 2 1 3 / / / / 4 4 2 2 1 1 1 1 1 1 1 1 Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1and2,GroupsC,D EYSX9, EYSX10,EYSX1SA–EYSX10 / / / / / / / / 1 or copper-freealuminum(SASuffix) (SA Suffix) ductile ironorcopper-freealuminum paint electrogalvanized andaluminumacrylic Feraloy / 2 4 4 2 2 2 2 2 2 " –4" EYSX10 SA EYSX8 SA EYSX3 SA EYSX10* EYSX81 EYSX31 EYSX6 SA EYSX61 EYSX9 SA EYSX9* EYSX7 SA EYSX71 EYSX5 SA EYSX51 EYSX4 SA EYSX41 EYSX2 SA EYSX21* EYSX1 SA EYSX11* iron alloyandductile– Feraloy Feraloy ® l III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. II, D§ Cl. C, GroupsB, 1&2, Div. I, Cl. 0 222 200 110 95 68 0 222 200 110 95 664 64 56 56 68 0 222 222 200 82 200 82 72 22 72 22 22 22 19 19 19 19 33 33 22 22 iron alloyand/or iron alloyand/orsteel Internal VolumeInternal in CubicInches © 2013 Eaton’sCrouse-Hinds Business 3 3 / / 4 4 1 1 3 3 3 3 / / / / / / 2 2 4 4 4 4 SA seal. compound orChicoSpeedSealareusedtomakethe 2 2 B 1 1 1 A 1 Size NPT In Inches: Dimensions locations onlywhen Sealing fittingsareapprovedforuseinhazardous 3 4 3 3 *Feraloy ‡With plugcoverremoved. of eachproduct. § SeeCertificationsandCompliancesforclasssification / / 4 2 1 1 1 1 / / / / 2 2 2 4 ® Vertical orhorizontalfemale 8 5 9 11 9 6 6 4 3 11 3 3 1 1 1 1 5 11 / / / / / / / 4 16 2 4 4 16 16 / 1 1 16 / / Dust-Ignitionproof Explosionproof 16 16 Chico 6 6 5 4 4 32 32 2 1 1 ® 1 1 1 3 1 3 3 1 X / / / / / / / / 2 2 4 4 4 16 4 2 fiber and 4- 4- 3- 3- 3 1 1 1 Radius Turning 5 5 5 23 3 1 / / / / / 19 19 11 7 16 16 16 8 4 / / Chico A 32 16 / / / 32 32 16 ‡ ‡ ‡ ‡ sealing 6F 147 † † † † † 6F 32 † / 16 16 16 16 2 32 / / / / / / 8 27 5 5 5 7 1 / 29 3 Turning Radius 1 2 1- 3- 3- 3- 16 16 4 4 4 / / / / / 4 3 3 1 3 1 / 2 2 32- 32- 4 4 5 13 " 1" – 3" 16 4 / 16 16 4 4 2 16 4 / / / / / / / / 3 11 5 1 1 1 1 3 3 8 9 3 4 6 6 9 5 " – 2 / 1 2013 Eaton’s Crouse-Hinds Business 2 4 2 / / / 1 1 1 2 4 © / / In Inches: Dimensions 1 2 2 3 1 3 EYDX NPT Size1 A1 B †With drain cover removed. Explosionproof Dust-Ignitionproof SA sealing Chico A 4 4 / / 3 3 2 2 3 3 20 20 20 20 75 75 Internal Volume in Cubic Inches 8 57 105 8 57 105 fiber and X ® Chico " – 3" 2 / 1 iron alloy and ductile iron – iron alloy and ductile iron EYDX11* EYDX1 SA EYDX21* EYDX2 SA EYDX41 EYDX4 SA EYDX51 EYDX5 SA EYDX71 EYDX7 SA Female Hub Cat # EYDX31 EYDX61 EYDX81 EYDX3 SA EYDX6 SA EYDX8 SA ® Cl. I, Div. 1 & 2, B, Groups C,Cl. D§ II, Div. 1, Groups E, F,Cl. G II, Div. 2, Groups F, G Cl. III 4 2 2 2 2 4 Feraloy acrylic electrogalvanized and aluminum paint / / / / / / 1 1 1 1 1 1 2 2 4 4 / / / / 3 Ordering Information Ordering Hub Size 1 1 3 1 1 1 1 2 2 3 1 2 3 1 2 Size Ranges: • EYDX – Options: Descriptionbodies and Copper-free aluminum enclosures Suffix Sealing Fittings are approved for use in hazardous locations only when § See Certifications and Compliances for classification of each product. * Feraloy compound or Chico SpeedSeal are used to make the seal. Standard Finishes: Standard • • – natural Copper-free aluminum • Stainless steel – natural • Steel – electrogalvanized iron www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright ® iron alloy Feraloy Feraloy EYDX11 – EYDX81 Class I, Division 1 and 2, Groups B, C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III EYDX1 SA – EYDX8 SA Class I, Division 1 and 2, Groups C, D Class II, Division 1, Groups F, G Class II, Division 2, Groups F, G Class III alloy, and ductile iron or copper-free aluminum (SA Suffix) or malleable iron and/or steel or copper-free aluminum (SA Suffix) sealing drainage of condensate to provide easy access to conduit hubs for making dams insulation from damage continuity flames from one portion of the electrical flames from one portion atmospheric installation to another at pressure and normal ambient temperatures enclosure piling" in conduit systems conduit system uninterrupted runs in a Standard Materials: Standard • Bodies and drain covers – Certifications and Compliances: • NEC/CEC: • UL Standard: 1203 • CSA Standard: C22.2 No. 30 • Closure for drain – copper-free aluminum • Small closure plug – • Drain – stainless steel Features: EYDX Expanded Fill drain sealing fittings provide: • A 40% wire fill capacity for expanded fill • Drain to provide continuous, automatic • Large openings with threaded closures • Integral bushings to protect conductor • Taper-tapped hubs to ensure ground EYDX Expanded Fill Sealing Fittings with EYDX Expanded Fill Sealing drains: • of gases, vapors or Restrict the passage • the sealed-off Limit explosions to • or "pressure Prevent precompression • fill capacity to allow Provide 40% wire Drain sealing fittings are installed in vertical conduit runs and at low points in conduit systems to prevent accumulation of condensate above seal. For sealing fittings requirements see page 139. Applications: Chico Sealing Compound and Fiber Compound Chico Sealing see pages 155–156 EYDX Expanded Fill Sealing Expanded EYDX With Fittings Drains 6F 148 locations onlywhen EYSR sealingfittingsareapprovedforuseinhazardous Chico X Gasket–neoprene • Pipeplugs,boltsand setscrews–steel • Body– • Standard Materials: Availablein • Suitableforverticalandhorizontal • Steelsetscrewsprovidegrounding • Pipeplugspermittheinstallationofa • Overalllengthandspacingrequirements • Sealmaybeinstalledintheexisting • Features: CSAStandard:C22.2No.30 • CEC: • ULStandard:1203 • NEC: • Compliances: Certifications and Topreventaccumulationofwaterinthe • Tolimitprecompressionor"pressure • Tolimitexplosionstothesealed-off • Torestrictthepassageofgases,vapors, • Inverticalorhorizontalpositions, • Withoutdisassemblyoftheconduit • ToreplaceinstalledEaton'sCrouse- • InrigidmetalconduitsystemsinClassI, • EYSR retrofitsealingfittingsareinstalled: Applications: 6F applications installations forindoorandoutdoor continuity accumulate intheconduitsystem runs todrainanywaterthatmight separately) foruseinverticalconduit standard ECD15drainfitting(order seals; permitsclosenestingofseals do notexceedthoseofstandardEYS conduit systemsavingtimeandlabor conduit runwithoutdisassemblyofthe ECD15 drain conduit systemwheninstalledwithan piling" intheconduitsystem enclosure ambient temperatures atmospheric pressuresandnormal electrical systemtoanotherat or flamesfromoneportionofthe indoors oroutdoors system Hinds typeEYSorEYDsealingfittings Division 2hazardouslocations Class II,Division1,GroupsE,F,G Class I,Division1,GroupsC,D Class II,Division2,GroupsE,F,G Class I,Division2,GroupsC,D fiber areusedtomaketheseal. Feraloy www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 3 / Chico 4 " to4"NPTsizes ® iron alloy ® n ie e ae 155–156 and Fiberseepages Chico SealingCompound A sealing compoundand EYSR RetrofitSealingFitting Gasket–natural • Steel–electrogalvanized • • Standard Finishes: In Inches: Dimensions 4 3 2 2 *Use theapproximateinternalvolumeincubicinchestodeterminehowmuchChicoAsealing compoundisrequired. 1 1 1 3 Ordering Information a.#ABC B A EYSR4 EYSR3 EYSR2 # Cat. EYSR6 EYSR5 3 u ieCt et oi.Vr.Horiz. Vert. Horiz. Vert. # Cat. Hub Size / 4 1 1 1 1 and aluminumacrylicpaint Feraloy / / / / 2 2 2 4 iron alloy–electrogalvanized 53 4 3 6 5 1 1 3 11 / / / 4 4 8 / 16 EYSR10 EYSR8 EYSR6 EYSR3 EYSR9 EYSR7 EYSR5 EYSR4 EYSR2 © 43 3 3 2 2013 Eaton’sCrouse-Hinds Business 5 3 1 1 / / / / 8 8 8 2 3 3 3 1 1 1 / / 8 5 4 252 186 86 25 4 4 1 4 210 75 147 48 12 7 13 3 Cubic Inches* Volume in Approximate Internal 8 2 3 1 / / 4 2 1 3 1 / / / 2 4 4 Dust-Ignitionproof G Explosionproof F, GroupsE, 2, Div. II, Cl. D GroupsC, 2, Div. I, Cl. • Size Ranges: ecito Suffix Copper-free aluminum Description Options: a.#ABC B A EYSR10 EYSR9 EYSR8 EYSR7 # Cat. 2 4 2 126 40 24 9 5 3 1 3 / / / 4 2 4 1 1 1 1 " –4" / / / / 2 2 4 2 1 12 1 1 1 1 per Hub (oz.) ofFiber Approximate Amount / / / / 9 9 8 7 2 4 8 16 1 1 1 / / / 3 13 1 1 2 2 2 / / / 4 2 2 / 64 6 6 5 53 5 1 1 1 1 1 9 9 3 1 / / / / / / 8 16 2 2 4 8 5 4 4 1 3 1 7 / / / / 4 4 4 8 SA 6F 149 6F TSC05 TSC1 TSC4 sealing Chico A 4 2 4 16 16 4 4 2 / / / / / / / / 1 1 3 3 7 1 1 1 1 1 1 2 4 5 6 fiber and X ® 16 16 32 32 32 / / / / / 32 Chico / 32 5 15 15 31 27 11 / 25 1 1 22 23 2 4 5 1. ES Sealing Hub 2. Locknut 3. Sealing Gasket 4. Sheet Metal Motor Structure, Center, Control Unit Panelboard, Substation, Etc. Sealing hubs are approved for use in hazardous Sealing hubs are approved for 4 4 16 16 4 4 4 2013 Eaton’s Crouse-Hinds Business / / / / / / / 3 3 1 9 3 3 1 © 22 2 2 2 3 3 4 6 7 Std. Ctn. Qty.10 Size Tube 10 Cat.5 #† 0.5 oz 1.0 oz 4.0 oz compound are used to make the seal. Sealing hubs are compound are used to make the runs for use in approved for horizontal conduit with TSC sealing hazardous locations when used TSC1. compound, order 1 oz. tube as Note: locations when †Order quantity of one (1) TSC05 or TSC1 equals 10 tubes; one (1) TSC4 equals 5 4.0 oz tubes. TSC Epoxy Sealing Compound A two part epoxy sealing compound may be used to seal ES sealing hubs. It is quick and easy to measure, mix and install. The compound is kneaded until a uniform color is obtained. It is then packed around the conductors to effectively seal the cable. 32 / 8 4 8 16 8 8 / / / / / / 3 3 5 1 5 5 25 8 8 / / 7 1 1 1 2 3 4 5 7 16 / 16 4 4 4 2 4 8 4 / / / / / / / / 9 13 1 3 3 1 1 5 1 1 1 2 2 2 3 6 7 5 9.1 36.0 95.0 155.0 3.2 Approximate Internal Volume in Cubic Inches .65 .65 4.9 4.7 1. ES Sealing Hub Connector 2. LT 3. Locknut 4. Sealing Gasket 5. Junction Box 6. UNY Union Motor 7. Synchronous 8. EDS Factory Sealed Station Control Conduit 9. LT Cl. I, Div. 1 & 2, C, Groups D Explosionproof Watertight ES108 ES01210 ES014012 ES76 ES53 ES64 ES65 ES31 ES32 2 2 / / 1 1 Male Hub Size Cat. # 2 2 1 1 Cat. #ES31 ES32 ES53 ES64 ES65 aES76 ES01210 ES014012 b c d e ES108 Typical Installations Typical 4 2 / / 1 1 2 4 / / 34 45 56 1 11 1 2 2 Female Hub Size 1 3 Ordering Information Ordering SG 1. ES Sealing Hub 2. EJB Junction Box 3. UNY Union 4. EDS Factory Sealed Station Control 5. EYS Horizontal Seal Motor 6. Explosion-Proof www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright iron alloy ® and motor control centers, sheet metal and motor control centers, and enclosures structures or cast boxes with TSC sealing enclosures when used compound Feraloy paint Dimensions In Inches: Chico Sealing Compound and Fiber Compound Chico Sealing see pages 155–156 Applications: ES sealing hubs are used to: ES sealing hubs are used • risers at switchgear Seal vertical conduit • runs at Seal horizontal conduit Certifications and Compliances: • 2, Groups C & D Class I, Division 1 & • UL Standard: 1203 • CSA Standard: C22.2 No. 30 • Finishes: Standard • Electrogalvanized and aluminum acrylic Standard Materials: Standard ES Sealing Hubs ES Sealing Options: ES sealing hubs, when used with SG armored gaskets and locknuts, provide a water and oiltight connection DescriptionSealing gaskets and locknuts Suffix 6F 150 ConformstoSection18-108and18-158oftheCEC • Each sealisalsodi-electricandresistancetested. pressure 1500PSI)asagasandliquidtightexplosionprooffitting. Each fittingistestedat1.5timesworkingpressure(max. Quality Assurance: Stainlesssteelbody-naturalfinish • Standard Materials&Finishes: • Wiregradeisratedtoa600Voltsafetyfactor • 24VoltDC-120AC • CertifiedtoCSAStandardsthroughQPS • ClassI,Division1,GroupsB,C,D • Certifications &Compliances: Areidealwherevolatileliquidsorgasesarestored,processed • Aredesignedtopreventthepassageofgasesunderpressure • Iftheprimarysealinaninstrumentshouldfail,Eaton'sCrouse- • Applications: Ordering Information: INSTALLATION EXAMPLE: CH6DR500X2D2D16G CH6DR500X294D16G CH6DR500X264D16G CH6DR500X234D14G CH6DR500X004D22G CH6DR500X004D18G CH6DR500X004D16G CH6DR500X004D14G Description CH6DR500X002D22G CH6DR500X002D18G CH6DR500X002D16G CH6DR500X002D14G Catalog Number Requirements ofaSecondarySeal. 1 transported underpressure. through conduits,cablesandconductors. location. migrating throughtheelectricalsystemintoanon-classified Hinds UltraHighPressureSeal(UHPS)willpreventgasesfrom / 2 6F ” MNPTx www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright 1 / 2 ” NPT Rated to1500PSI Ultra HighPressureSeal UHPS, 2wire,16G,2'input,CFoutput UHPS, 4wire,16G,2'input,9'output UHPS, 4wire,16G,2'input,6'output UHPS, 4wire,14G,2'input,3'output UHPS, 4wire,22gauge UHPS, 4wire,18gauge UHPS, 4wire,16gauge UHPS, 4wire,14gauge UHPS, 2wire,22gauge UHPS, 2wire,18gauge UHPS, 2wire,16gauge UHPS, 2wire,14gauge ® for The l ,Dv ,Gop ,C D Certified toCSAStandardsthroughQPS C, GroupsB, 1, Div. I, Cl. © 2013 Eaton’sCrouse-Hinds Business 6F 151 6F DIN12 DIN14 (leave option blank) Assembly with Indication Rupture Sensor and Vent/Drain 2013 Eaton’s Crouse-Hinds Business © Assembly with Vent/Drain SPS214SPS216SPS218SPS222SPS414 SPS214R SPS416 SPS216R SPS418 SPS218R SPS422 SPS222R SPS414R SPS416R SPS418R SPS422R NEMA 3,NEMA 4, 7BCD, 9 2 2 wire, 14 gauge 2 wire, 16 gauge 2 wire, 18 gauge 2 wire, 22 gauge 4 wire, 14 gauge 4 wire, 16 gauge 4 wire, 18 gauge 4 wire, 22 gauge Ordering Information: Ordering catalog #PSRIS. For Process Seal Rupture Indication Sensor replacement, order Description Suffix No terminal blocks 2 terminal blocks 4 terminal blocks Options: Cl. I, Div. 1 & 2, B, Groups C,Cl. D I, 1 & 2 IIB + H Zone Cl. II, Div. 1 & 2, E, Groups F, G www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright for maintenance to quickly address the problem and isolate safety concerns and durability requirements for a secondary process seal and explosionproof requirements for a secondary process seal and conduit seal applications installation codes or liquid from the electrical system to meet required access for quick connection of circuits primary seal failure Secondary Process Seal Assemblies Rupture Indication Sensor Rupture • Rupture detection and indication at 60 psi • Provides remote, immediate notification of a seal rupture, allowing • Stainless steel construction provides superior corrosion resistance Features and Benefits: Features Seal Secondary Process • CSA and CSAus certified • / NEC / API Meets or exceeds ANSI / ISA / CSA / CEC • Sealed to 1500 psi, operates in any position • in new and existing Simplified design allows for easier installation • components for Integrated packaging contains all necessary • release of gas, vapor The explosionproof drain allows for the safe • design to provide Explosionproof terminal box features a simple • obvious" indication of Assembly with drain provides local "make Rupture Indication Sensor: Indication Rupture Seal features a rupture indication sensor that The Secondary Process a circuit to a control opens safely at 60 psi minimum and activates personnel system or alarm, which immediately alerts maintenance of the problem can that the primary seal has ruptured. The location be pinpointed so the problem can be quickly addressed. easy installation and Innovative, intelligent technology combined with solution for low maintenance cost provides a safe and reliable facility. detection of a process seal rupture within your Applications: Process Seal Assembly with Eaton's Crouse-Hinds Secondary is designed to prevent the passage of Rupture Indication Sensor conduit, cables and conductors while gases under pressure through of a dangerous, potentially explosive providing immediate notification are ideal where volatile liquids or seal rupture. These assemblies or transported under pressure. If the gases are stored, processed should fail, the Eaton's Crouse-Hinds primary seal in an instrument will prevent gases, vapors and liquids from Secondary Process Seal location through the electrical migrating into the non-classified system. 6F 152 Assembly withprocess sealrupture indicationsensor Assembly Information *60 psiinternalpressureratingat25°Cambient. Activationpressuremayvary+/-10%dependingonambientvariation. 6F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Seal Assemblies Process Secondary l I i.1&2 rusE ,G F, GroupsE, 1&2, Div. II, Cl. Zone1&2IIB+H I, D Cl. C, GroupsB, 1&2, Div. I, Cl. © 2013 Eaton’sCrouse-Hinds Business 2 EA3 ,7C,9 7BCD, 4, NEMA 3, 6F 153 6F and 2 2 Cl. I, Div. 1 & 2, Groups B, C, D Cl. II, Div. 1 & 2, Groups E, F, G Zone 1 IIB+H Zone 2 IIB+H NEMA 3, 4, 7BCD, 9 55°C) 80°C) ≤ ≤ 2013 Eaton’s Crouse-Hinds Business 40°C) © ≤ NEMA 3,NEMA 4, 7BCD, 9 – – – 24VDC 120VAC 174 mA 24VDC T6 (Tamb T5 (40°C < Tamb T4 (55°C < Tamb 2 Secondary Process Seal with Rupture Indication Seal with Rupture Secondary Process indication, and ECD Sensor for remote drain for local "make obvious" explosionproof indication UL1203 CSA C22.2 No. 30 ANSI / ISA 12.27.01 - 2003 CEC 18 - 108, 158 NEC 501.15(F)(3) UL1203 CSA C22.2 No. 30 CSA 22.2 No. 30 - 03 CSA 22.2 No. 14 - 2005 ANSI / ISA 12.27.01 - 2003 CEC 18 - 108, 158 NEC 501.15(F)(3) (Div. 1, Zone 1) intrinsically safe (Div. 2, Zone 2) non-incendive Simple apparatus (NEC 504.4) Cl. I, Div. 1 & 2, B, Groups C,Cl. D I, 1 & 2 IIB + H Zone Cl. II, Div. 1 & 2, E, Groups F, G - www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright - 316 Stainless steel Hub stainless steel Copper-free aluminum Stainless steel Switch Assembly hermetically sealed, nickeled brass, with silicon cable

Drain / Vent Process Seal Rupture Process Indication Sensor Terminal Housing Terminal Components Construction Certifications and Compliances Rating Suitability Area Ultra High Pressure Seal Ultra High Pressure Note: For more extreme temperature and/or pressure requirements, please consult Note: For more extreme temperature and/or pressure requirements, factory. Data - Components Technical Operating Pressure Rating Operating Pressure Rupture protection to 1500 psi Rupture indication at 60 psi minimum Range Operating Temperature -25ºC to +50ºC Technical Data - Assembly Technical Certification Product are CSA certified The Secondary Process Seal and Assemblies (Canada, U.S.) Installation Examples Seal with local "make obvious" Secondary Process drain ECD explosionproof indication using an

Seal Assemblies Secondary Process 6F Note: 154 Dimensions (Inches): Assembly withrupture sensorandvent/drain 6F Assemblies shownwithDIN12terminalblocks(optional) www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Seal Assemblies Process Secondary l I i.1&2 rusE ,G F, GroupsE, 1&2, Div. II, Cl. Zone1&2IIB+H I, D Cl. C, GroupsB, 1&2, Div. I, Cl. © 2013 Eaton’sCrouse-Hinds Business Assembly withvent/drain 2 EA3 ,7C,9 7BCD, 4, NEMA 3, 6F ® 155 are 6F Chico A3 Chico A4 Chico A05 Chico A19 PX* Chico A39 PX* Chico SpeedSeal Vol. Cu. In.† Cat. # No. of Pouches per Carton Cat. # Sealing Compound or 2013 Eaton’s Crouse-Hinds Business Net Weight 1 lb. 1 lb.‡ 5 lb. 23 23 115 © Chico A Cu. In. Fill per Pouch† 55 11 5 - 2 oz. or 6 oz. cartridge 149). – fiber and (5 pouches per carton) – provides 25 and 55 cubic (5 pouches per carton) compound – 1 lb. to 5 lbs. (provides 23–115 cubic compound – 1 lb. to 5 lbs. fiber – 2 oz. to 1 lb. Chico X Chico A-P inches of compound Chico SpeedSeal Chico A inches of compound) Chico X *A sixth pouch, containing an appropriate quantity of Chico X fiber, is included in *A sixth pouch, containing an appropriate quantity of Chico X these cartons. volume †Number of cubic inches this amount will fill when set. See internal and ES sealing requirements for EYS, EZS, EYD, EZD and EYSR sealing fittings hubs (see pages 140 ‡Includes 1 oz. Chico X fiber. Ordering Information - Chico A-P Intrapak Ordering • • used to make the seal. Size Ranges: • • are approved for use in hazardous locations Eaton's Crouse-Hinds sealing fittings only when A Information - Chico Ordering every time www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright A-P Sealing Compound Sealing A-P " to 2" Eaton's Crouse-Hinds sealing 2 / 1 ® ™ Compound: Compound: : ® ™ ™ X Fiber SpeedSeal A and Chico A and ® ® ® sealing compound: fiber: SpeedSeal SpeedSeal ® ® fittings only. need for measuring before mixing. need to separate the individual conductors with Chico X fiber. reducing installation times. build a temporary shelter around sealing fittings. All ice crystals must be removed from inside the conduit seal before dispensing Chico SpeedSeal compound. The Chico SpeedSeal compound should be kept above 10°C (50°F) and below 85°F (29°C) prior to mixing. The sealing fitting must be kept at or above 4°C (40°F) during the 4 to 10 minute expansion/gel time of the compound. water for mixing. No mixing or measuring implements required. water for mixing. No mixing or measuring implements Mixing is completed by compartment containing the Chico compound. kneading the pouch for one minute. the size and quantity – no funnel required. The package label indicates Compound hardens in of sealing fittings each pouch will properly fill. 60–70 minutes. Groups C, D and Class II, Division 1, Groups E, F, G hazardous applications. compound, unusually dense, expands slightly when hardening and compound, unusually dense, expands slightly hardens in 60–70 bonds to inner walls of sealing fittings. Compound minutes and 72 hours for Class I, Group A and B applications. the end of the conduit and around the electrical conductors entering the end of the conduit and the hub fitting to restrict the passage of gases, and inside of the sealing the sealing fitting at atmospheric pressure vapors or flames through temperatures and at normal ambient electrical conductor in Eaton's Crouse-Hinds EYS and EYD sealing electrical conductor in Eaton's fittings sealing fitting Division 1, Groups E, F, G hazardous areas For Sealing Fittings and Hubs For Sealing • Packaged in a 2 oz. or 6 oz. pre-measured cartridge, eliminating the • Packaged with a screw-on nozzle for accurate dispensing. • Expands four times its original size in the sealing fitting, eliminating the • Chico X fiber dams are not required in horizontal applications, • Completely hardens in 20 minutes, simplifying use for OEMs. • Suitable for cold temperature environments without the costly need to • 18 months shelf-life. • Patent pending. • with precise amount of Packaged in two-compartment plastic pouch • forces the water into the A hard squeeze of the water compartment •directly into the sealing fitting The mixed sealing compound is poured Chico X fiber: • around each conductor A mineral wool that packs easily, forming Chico • Installs a reliable seal in five minutes - • Hardens to a dense, strong mass that is suitable for Class I, Division 1, • UL and cUL Listed for use with Features: Chico A sealing compound: • mixed and poured. The A water soluble powder that can be easily • C and D applications Chico A cure time is 8 hours for Class I, Group • manufacture. Chico A has a 1 year shelf life from date of •curing) is –40°F to +165°F. Chico A ambient temperature range (after Chico A-P Intrapak Applications: Chico X • the integral bushing of the sealing fitting and Forms a dam between Chico A • each electrical conductor and between them Forms a seal around Chico • and form an explosionproof seal around each Designed to separate •flames through the Restricts the passage of gases, vapors or • C, D and Class II, Creates a seal for Class I, Division 1, Groups Chico Chico Chico 6F 156 Chico XFiber Ordering Information- 4 6 5 3 3 2 2 1 1 1 Ozs.Required 1 Hub Size of FiberPerHub Chart forApproximate Amount 3 / / e egtCt # Cat. 1 lb. 8 oz. 2 oz. Net Weight 4 2 1 1 1 1 / / / / 2 2 2 4 6F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Chico 1 1 4 3 1 1 1 1 10 7 2 1 / / / / / 2 4 8 16 32 1 1 / / Chico 2 2 For SealingFittingsandHubs Chico Chico X7 Chico X6 Chico X4 ® ® ® A andChico SpeedSeal X Fiber MSDS sheetsareavailableatwww.crouse-hinds.com EYSX51, EYDX51 EYD6, EYD66,EYD61,EYD616 EYS61, EYS616,EYS6,EYS66 EYSX41, EYDX41 EYSX31, EYDX31 EYD5, EYD56,EYD51,EYD516 EYS51, EYS516,EYS5,EYS56 EYD4, EYD46,EYD41,EYD416 EYS41, EYS416,EYS4,EYS46 EYSX21, EYDX21 EYD3, EYD36,EYD31,EYD316 EYS3, EYS36,EYS31,EYS316 EYSX11, EYDX11 EYD2, EYD26,EYD21,EYD216 EYS2, EYS26,EYS21,EYS216 EYD1, EYD16,EYD11,EYD116 EYS1, EYS16;EYS11,EYS116 # Cat. Sealing Fitting Class I,Div.1,Groups C&DandClassII,Div.1,Groups E,FandG Ordering Information-ChicoSpeedSeal ™ ® A-P SealingCompound © 2013 Eaton’sCrouse-Hinds Business 6 3 2 # SpeedSealCat. 1 (in ounces) needed perfitting SpeedSeal Material Amount of (6 oz.Cartridge) CHICO SS6 (6 oz.Cartridge) CHICO SS6 (2 oz.Cartridge) CHICO SS2 (2 oz.Cartridge) CHICO SS2 6F 157 6F to see areas. The mirrored tool allows for proper The mirrored 2013 Eaton’s Crouse-Hinds Business inspection of the fiber dam in difficult © conductors is effortless. fiber in between and around electrical fiber in between and around With one of the packing tools, packing www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright EYS TOOL KIT all the conductors. tools have two unique ends for a total of 9 different tools. tools have two unique ends the electrical insulation. surfaces that will not abrade individual wires. on the other end is designed to lift and separate conductors. packing fiber in between and around electrical of conductors while packing fiber. fittings. sizes of fittings. while not in use. The large hook on Tool #3 quickly lifts The large hook on Tool Ordering Information Ordering DescriptionEYS Tool Kit Cat. # Features and Benefits: Features • of five tools and a canvas tool bag. Four The EYS Tool Kit consists • for easy identification. Each tool is numbered • of durable plastic with smooth and rounded Tools are constructed • end and a small hook The Hook tool (#3) with a large hook on one • ends designed for The Packing tools (#1, #2 & #4) have rounded •for hands-free separation The Wedge tools (#2 & #5) are designed • of the sealing The Mirrored tool (#5) allows for easy inspection • accomodate various All tools are sized and precisely angled to • store and protect tools The canvas tool bag is designed to neatly Eaton's Crouse-Hinds EYS Tool Kit lets you safely and reliably pack Eaton's Crouse-Hinds EYS sealing fittings. Consisting of five the fiber dam in explosionproof in a handy canvas bag, the EYS Tool Kit patented, two-sided tools of separating electrical conductors and makes the critical steps and easy. packing fiber dams quick For Use with Sealing Fittings and Hubs Sealing Fittings For Use with EYS Tool Kit Tool EYS 6F 158 Thread-in-threadandlabyrinthdesign, • Havethecapabilitytopass25ccofwater • Providesventilation tominimizecondensation • "Combination" ECDbreatheranddrain: ECD387and ECD16areauniquethread-in- • ECD11,13have capabilitytopass25ccof • Thread-in-threaddesign,suitableforusein • "Standard" ECDdrainsandbreathershave: ECD15andECD385eachhaveawellinside • Capabilitytopass50ccofwaterperminute • Patentedlabyrinthdesign,suitableforusein • "Universal" drainsandbreathershave: ECD284, ECD384,ECD385andECD15 Features: Applications: ECDdrainsandbreathersareinstalledin • Drainsandbreathersareinstalledinhubsor • "Combination"breatheranddrainisusedin • "Universal"breatherordrainfunctionsasa • A"standard"drainisinstalledinbottomof • Abreatherisinstalledintopofenclosureor • Atleastonebreathershouldbeusedwith • Groups FandG;ClassIIIareas Groups CandD;ClassII,Division1& 2, suitable foruseinClassI,Division1& 2, minute atatmosphericpressure per minuteand.10cubicfeetofair conduit system installed inthebottomofanenclosureor functions performedbyasingledevice and drainsaccumulatedcondensate–two pass .01cubicfeetofairperminute. 15cc ofwaterperminute.TheECD16can III areas.TheECD387andECD16canpass E,F,G; ClassII,Division2,GroupsF,G; Groups B,C,D;ClassII,Division1, shaft designforuseinClassI,Division1&2, minute atatmosphericpressure water perminuteand.05cubicfeetofair Groups F,GandClassIIIareas Division 1,GroupsE,F,G;ClassII,2, Class I,Division1&2,GroupsC,D;II, when usedasadrain accumulation ofsedimentwithoutclogging the inner,threadedendtoprovidefor atmospheric pressure and 0.2cubicfeetorairperminuteat II, Division1&2,GroupsF,Gareas Class I,Division1&2,GroupsC,Dand enclosures orconduitsystemsto: drilled andtappedopenings of enclosure enclosure throughthebreatherlocatedontop installations wheremoisturemayenterthe limited space;orinoffshoreandmarine mounted breatherisnotpracticaldueto those applicationswheretheuseofatop bottom ofanenclosure enclosure, orasadrainwhenmountedinthe breather whenmountedatthetopofan system enclosure orinlowersectionofconduit upper sectionofconduitsystem each drain Drain accumulatedcondensate Provide ventilationtominimizecondensation 6F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright Drains andBreathers ATEXCertificate#ITS07ATEX15639U • Type4X:ECD-N4DandECD-N4B • CSAStandard:C22.2No.30 • ULStandard:1203 • ECD18–stainlesssteelwithneoprenetube • ECD387–stainlesssteel • ECD16,ECD-N4D,ECD-N4B–stainlesssteel • ECD13–stainlesssteelwithaluminumcap • ECD11,ECD15,ECD281,ECD284,ECD384, • Standard Materials: NEC/CEC: • Compliances: Certifications and • Size Ranges: a combinationmotorstarter Typical installationofdrainandbreatherin 2. Thesebreathersanddrainscanbefactoryinstalled on 1. Atleast5fullthreadsofdrainorbreathermust be 1 applicable equipmentpagesforsuffixestobe used. various explosion-proofequipment.Seeoptions on Part II,Table7.6. NTC orNationalBureauofStandardsHandbook H28, accordance withNEMA/EEMACStandardFB-1, Type engaged inmatchingfemalethread,taper-tapped in ECD385 –stainlesssteel / 4 Class II,Division2,GroupsF,G Class II,Division1,GroupsF,G Class I,Division1&2,GroupC,D ECD284 – IP42 IIB(ECD15only) Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsF,G Class I,Division1&2,GroupsC,D ECD18, ECD384,ECD15,ECD385– Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsC,D ECD11, ECD13,ECD281– ECD-N4B only) IIB +Hydrogen(ECD-N4Dand IP46 (ECD-N4DandECD-N4Bonly) Class III Class II,Division2,GroupsF,G Class II,Division1,GroupsE,F,G Class I,Division1&2,GroupsB,C,D ECD 16,ECD387,ECD-N4D,ECD-N4B– " to 1 / 2 " l III Cl. G GroupsF, 2, Div. II, G Cl. F, GroupsE, 1, Div. II, D Cl. C, GroupsB, 1&2, Div. I, Cl. Breather Drain © 2013 Eaton’sCrouse-Hinds Business 1 3 Size Drain andBreather ECD "Type 4X" Ordering Information 1 3 1 Size Drain andBreather ECD "Standard" ieCt # Cat. 1 Size Drain orBreather ECD "Combination" ieCt # Cat. 1 1 3 3 1 Size Drain orBreather ECD "Universal" use inconfinedspacessuchaspanelboardassemblies. †Shorter overalllengththanECD15andECD385.For / / / / / / / / / / / 2 2 2 8 8 4 2 8 2 8 4 C1 ECD13 ECD11 C1 ECD16 ECD15 ECD18 C1NDECD1N4B ECD38N4B ECD1 N4D ECD38 N4D a.# Cat. Drain Dust-Ignitionproof Explosionproof (ECD Type 4XSeries) II 2GExdIIB+Hydrogen II 2GExdIIB(ECD15) C1 ECD13 ECD11 ECD387 ECD281 a.# Cat. Drain ECD18 ECD16 ECD15 ECD385 ECD384† ECD284† a.# Cat. Breather a.# Cat. Breather 6F 159 6F ACDPEB/050NPT/15 ACDPES/050NPT/15 ACDPEB/075NPT/15 ACDPES/075NPT/15 ACDPEB/M20/15 ACDPES/M20/15 ACDPEN/M20/15 ACDPEB/M25/15 ACDPES/M25/15 ACDPEN/M25/15 2013 Eaton’s Crouse-Hinds Business © Enclosure Type 4X Enclosure Type IP66 CD1 CD2 """" Brass Stainless Steel Brass Stainless Steel 2 4 2 2 4 4 / / Ordering Information Ordering Size1 3 Cat. # / / / / 1 1 3 3 Ordering Information Ordering Entry Method MaterialM20M20M20 Brass M25 Stainless Steel M25 Nylon M25 Brass Stainless Steel Nylon Cat. # . I M2 II 2GD, E Exe I & II (Stainless Steel & Brass only) II 2GD, E Exe II (Nylon version) CSA Class I, Division 2, Groups A, B, C & D, Exe II SA www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright optimize ingress protection. enclosure and the locknut to the drain holes in the fitting Operating Temperature: • –50°C to +85°C Certifications and Compliances: • SIRA 99 ATEX 3050U • Steel & Brass only) I M2 II 2GD, E Exe I & II (Stainless • II 2GD, E Exe II (Nylon only) • B, C & D, Exe II CSA Class I, Division 2, Groups A, • Enclosure Type 4X • IP66 • Available in brass, stainless steel (Type 316) or 30% glass filled nylon. • Captive "O" ring on recess of the face of the breather/drain to • ATEX and CSA Certified for worldwide market acceptance. • Available with metric or NPT threads. Features: All NEMA 4X breather/drains offer: • Castellated locknuts that allow moisture to pass between the Applications: drain For use in enclosures to provide a method to effectively moisture while allowing the enclosure to breathe. NEMA 4X Breather/Drain Options: DescriptionCopper-free aluminum construction Suffix • 514B UL Standard Materials: Standard • and nuts – steel or aluminum CD bodies • CD screen – stainless steel Finishes: Standard • Steel – electrogalvanized with chromate treatment. Applications: use in conduit systems to: CD Series drains are for • condensate. Drain accumulated • to minimize condensation. Provide ventilation or drilled and tapped openings. Drains are installed in hubs Compliances: Certifications and CD Series OrdinarySeries CD Drain Location ATEX and CENELEC Range ATEX Straight Body •Straight Thread Male 6F 160 6F www.crouse-hinds.com US:1-866-764-5454CAN:1-800-265-0502 Copyright © 2013 Eaton’sCrouse-Hinds Business