2014-2015 Products compatibility information

Compatibilities are subject to change without prior notice. Issued on January 7, 2015 INC. Word definitions Line D goes thru center and freehub center. In case of rear suspension Line D type, line D should be determined by riding height such as 1G sag. BB Bottom bracket BC Brake cable BL Brake lever BR Brake caliper BT Battery CB Coaster brake CG Chain guard CJ Cassette joint CN Chain CP protector CS Cassette CT Chain tensioner DH Hub dynamo DU Drive unit EW Electric wire FC FD Front FH Freehub HB Front hub HP Head parts HRB Hub roller brake ID CI-DECK I-spec Integration mounting system of brake and shift lever LP Light MF Multiple MU Motor unit O.L.D. Over locknut dimension P.C.D. Pitch circle diameter PD Pedal PM Power modulator QR Quick release RD Rear derailleur SB Revo shifterARCHIVE integrated with brake lever SC Cycle computer SF Single free SG Internal geared hub SL Shift lever SPD Shimano pedaling dynamics SPD-SL Shimano pedaling dynamics-SL ST Dual control lever / Shift lever integrated with brake lever SW Switch WH Wheel

All information on this page as of Jan. 7th 2015. Version 1.0 CONTENTS

Compatibility MTB and ROAD components

Drivetrain for MTB components 1. Rear drivetrain compatibility...... 1 2. Front drivetrain compatibility...... 5 3. Front derailleur and crankset...... 10 4. Front derailleur and chain line (Tourney)...... 10 5. Crankset, bottom bracket and chain line...... 10 6. Chain, chainring and cassette sprocket...... 12 Drivetrain for road bike components 1. Rear drivetrain compatibility...... 13 2. Front drivetrain compatibility...... 15 3. Brake systems compatibility...... 16 4. Compatibility for flat handlebar...... 17 Disc brake 1. Disc brake caliper and Rotor compatibility...... 19 2. Combination chart (Mechanical Disc)...... 20 V-BRAKE and Hub roller brake 1. Compatibility between brake systems...... 21 2. Brake lever with switch compatibility...... 22

Comfort components

Compatibility for comfort bike components 1. Combinations of the rear , cassette sprocket, and crankset for designing the frame...... 23

Electronic Product Information 1. E-tubeARCHIVE compatibility chart...... 24

All information on this page as of Jan. 7th 2015. Version 1.0 Compatibility

Back to CONTENTS MTB and ROAD components Drivetrain for MTB components When using components of different series together, be aware of the points given below. 1. Rear drivetrain compatibility 1-1. 9,10,11-speed rear drivetrain Compatibility

SL RD CN CS FH / WH

HG MTB 9-speed 9-speed 9-speed 9-speed 9-speed

9-speed MTB MTB HG-X MTB 10-speed 10-speed 10-speed 10-speed 10-speed 10-speed 11-speed

MTB MTB MTB HG-X11 11-speed 11-speed 11-speed 11-speed 11-speed

1-2. 11-speed rear drivetrain SL RD CS CN FH / WH

NEW FH-M9000 NEW SL-M9000-R NEW RD-M9000 NEW FH-M9010 NEW SL-M9000-IR NEW CN-HG900-11 NEW WH-M9000

NEW CS-M9000 NEW CN-HG700-11 NEW WH-M9020

NEW CN-HG600-11 Other current 11-speed NEW SW-M9050 NEW RD-M9050 FH for MTB 9, 10s drivetrain

ARCHIVE

All information on this page as of Jan. 7th 2015. 1 Version 1.0 Back to CONTENTS

1-3. 10-speed rear drivetrain

SL RD CS CN FH / WH

RD-M981 FH-M985 RD-M986 FH-M988 CS-M980 RD-M781 FH-M785 CS-M771-10 RD-M786 FH-M788 CS-HG81-10 RD-M670 FH-T780 CS-HG62-10 RD-M675 FH-M675 CS-HG50-10 SL-M980-A-R RD-M615 FH-M678 (11-36T) SL-M980-B-IR RD-M610 FH-T670 SL-M820-R (32T≤low gear≤36T) FH-M615 SL-M820-B-IR FH-M618 SL-M780-R CN-M981 FH-T610 SL-M780-B-IR CN-M980 FH-M595 RD-M820 SL-T780-R CN-HG95 (23T≤low gear≤28T)*2 SL-M670-R CN-HG94 WH-M980 (32T≤low gear≤36T)*1 CS-M980 SL-M670-B-IR CN-HG75 WH-M985 10-speed CS-M771-10 SL-T670-R CN-HG74 WH-M988 RD-M640 CS-HG81-10 SL-M640-R CN-HG54 WH-M785 (23T≤low gear≤28T CS-HG62-10 SL-M610-R WH-M788 downhill spec.)*2 (11-34T, 11-32T) SL-M610-IR WH-MT75 (32T≤low gear≤36T SL-T610-R WH-MT66 free ride spec.) SL-M591-R WH-MT68 WH-MT55 WH-MT35 RD-T780 CS-6700 WH-MT15-A RD-T670-A CS-5700 Other current RD-T610 CS-4600 FH/WH for MTB (28T≤low gear≤34T)*2 (low gear≤32T) 9s drivetrain

*1: Mode converter *2: Compatible with road Cassette sprocket ARCHIVE

2 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

1-4. 9-speed rear drivetrain

CS Shadow RD W-servo RD CN

RD-M772 NEW RD-T4000 CN-7701 RD-M662 RD-M430 CN-HG93 RD-M592 RD-M390 CN-HG73

NEW RD-M4000 RD-M370 CN-HG53 CS-HG61-9 bh

NEW CS-HG400-9 bh 12 – 36T X – X

NEW CS-HG300-9 bh CS-HG80-9 au CS-HG61-9 au

NEW CS-HG400-9 au

NEW CS-HG300-9 au 11 – 34T X X X NEW CS-HG200-9 bn CS-HG50-9 au CS-HG30-9 au CS-HG20-9 bn CS-HG80-9 ar CS-HG61-9 ar

NEW CS-HG400-9 ar

NEW CS-HG300-9 ar 11 – 32T X X X NEW CS-HG200-9 bo CS-HG50-9 ar CS-HG30-9 ar CS-HG20-9 bo CS-HG80-9 bg CS-HG61-9 bg 11 – 28T – X X NEW CS-HG400-9 bg

NEW CS-HG300-9 bg X: Yes

1-5. 8,7-speed HG

CS RD CN

CS-HG51-8 8-speed HG 8-speed (11-28T, cassette RD-M410 rear 11-30T,11-32T) sprocket RD-M360 derailleur CS-HG41-8 Smart (11-30T,11-32T,11-34T) RD-M310 Cage CN-HG91 CS-HG31-8 NEW CN-HG71 HG (11-30T,11-32T,11-34T) RD-M280 CN-HG50 chain NEW RD-TX800 NEW CS-HG200-8 CN-HG40 (12-32T) UG CN-UG51 chain CS-HG41-7 7-speed HG RD-M360 7-speed (11-28T) cassette RD-M310 rear CS-HG20-7 sprocket RD-M280 derailleur (12-28T,12-32T)ARCHIVENEW RD-TX800 * The rear derailleur for 8-speed can also be used for 7-speed drivetrain.

All information on this page as of Jan. 7th 2015. 3 Version 1.0 Back to CONTENTS

1-6. 7-speed HG and 6-speed 7-speed MF/CS RD CN

CS-HG41-7 11-28T CS-HG20-7 12-28T RD-FT35 (front single) MF-HG37 13-28T RD-FT55 MF-TZ21 14-28T

RD-TX75 CS-HG20-7 12-32T 7,6-speed / MF-TZ31 14-34T RD-TX55 Top normal CN-HG91 RD-TX35 NEW CN-HG71 HG CN-HG50 chain CN-HG40

6-speed MF RD

RD-FT35 (front single) RD-FT55 UG MF-TZ20 14-28T CN-UG51 chain NEW RD-TY21-A 6-speed RD-TZ50 GS

RD-TX75 7,6-speed / MF-TZ30 14-34T RD-TX55 Top normal RD-TX35

ARCHIVE

4 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

2. Front drivetrain compatibility 2-1. 11-speed front drivetrain

SL FD FC CN BB

SM-BB93

NEW SL-M9000-L SM-BB80 NEW FD-M9000 (68mm/73mm) NEW SL-M9000-IL NEW FC-M9020-3 SM-BB70

NEW SM-BB52 (Threaded type) NEW CN-HG900-11

11-speed triple NEW FD-M9050 NEW CN-HG700-11 SM-BB94-41A NEW SW-M9050 SM-BB91-41A NEW CN-HG600-11 SM-BB71-41A NEW FD-M9070 NEW FC-M9000-2 (Press-Fit type) NEW FC-M9020-2 BB-ES25

NEW SL-M9000-L NEW FD-M9020 (FC-M522) NEW FC-M9000-1 NEW NEW SL-M9000-IL NEW FD-M9025 ( FC-M523) NEW FC-M9020-1 (OCTALINK) 11-speed double

2-2. 10-speed front drivetrain

SL FD FC CN BB

FD-M980 FD-M981 FD-M780 FC-M980(42-32-24T) FC-M780(42-32-24T) SL-M980-A-L FD-M781 FD-M670 FC-M670(42-32-24T) SL-M980-B-IL FD-M671 FC-M610(42-32-24T) SL-M780-L FD-M590-10 FC-M552(42-32-24T) SL-M780-B-IL FD-M591-10 SL-M670-L SM-BB93 SL-M670-B-IL SM-BB80 SL-M610-L (68mm/73mm)

10-speed triple FD-M780-A SL-M610-IL FC-M782(40-30-22T) FD-M781-A FC-M672(40-30-22T) SM-BB70 SL-M591-L CN-M981 FD-M670-A NEW SM-BB52 FC-M622(40-30-22T) CN-M980 FD-M671-A FC-M612(40-30-22T) (Threaded type) FD-M610 CN-HG95 NEW FC-M523(40-30-22T) FD-M611 CN-HG94 SM-BB94-41A CN-HG75 SM-BB91-41A CN-HG74 SM-BB71-41A (Press-Fit type) FC-M980(38-26T) CN-HG54 FC-M985(40-28T) SL-M980-A-L BB-ES25 FD-M985 FC-M985(42-30T)** (FC-M522) SL-M980-B-IL FC-M985(44-30T)*/** FD-M986 ( NEW FC-M523) SL-M780-L FC-M785(38-24T) FD-M785 (OCTALINK) SL-M780-B-IL FC-M785(38-26T) FD-M786 FC-M785(40-28T) SL-M670-L ARCHIVEFD-M675 FC-M675(38-24T) SL-M670-B-IL FD-M676 FC-M675(38-26T) SL-M610-L FC-M675(40-28T)

10-speed double FD-M616 SL-M610-IL FC-M625(38-24T) FD-M615 SL-M591-L FC-M615(40-28T) FC-M615(38-26T) FC-M615(38-24T)

*: Mount position is required for FD-M986-D used with double crankset 44T. **: Not compatible with E2 type front derailleur.

All information on this page as of Jan. 7th 2015. 5 Version 1.0 Back to CONTENTS

SL FD FC CN BB

FC-T780(48-36-26T) SL-T780-L SM-BB70 FD-T780-3 FC-T781(48-36-26T) SL-M780-L NEW SM-BB52 FD-T780-6 FC-T781(44-32-24T) CN-M981 SL-M780-B-IL FC-T671(48-36-26T) (Threaded type) FD-T781-3 CN-M980 SL-T670-L FC-T671(44-32-24T) FD-T670-3 FC-M610(48-36-26T) CN-HG95 SL-M670-L SM-BB71-41A FD-T670-6 FC-M670(48-36-26T) CN-HG94 SL-M670-B-IL (Press-Fit BB) FD-T671-3 FC-T611(48-36-26T) CN-HG75 SL-T610-L FD-T610-3 FC-T611(44-32-24T) CN-HG74

10-speed Trekking SL-M610-L FC-T551(48-36-26T) BB-ES25 FD-T610-6 CN-HG54 SL-M610-IL FC-T551(44-32-24T) (FC-T521) FD-T611-3 FC-T521 (48-36-26T) SL-M591-L (Square type) FC-T521 (44-32-24T)

2-3. 11-speed FC-FD compatibility

FD Speed 11-speed 11-speed Chain line 50 48.8 50 48.8

FC Chain stay angle 66-69° 66-69° 66-69° 66-69°

For triple For double For triple For double Chain line FC Model No. Gear combination (mm) NEW FD-M9020 NEW FD-M9000 NEW FD-M9050NEW FD-M9070 NEW FD-M9025

38-28T – X – X

NEW FC-M9000-2 48.8 36-26T – X – X NEW FC-M9020-2 34-24T – X – X

50.0 NEW FC-M9020-3 40-30-22T X – X –

ARCHIVE

6 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

2-4. 10-speed FC-FD compatibility

Top swing For triple For double Chain stay 66°- 69° 66°- 69° 66°- 69° 66°- 69° 63°- 66° 66°- 69° 66°- 69° 66°- 69° 66°- 69° angle FC Model No. FD-M985-E2 FD-M985 FD-M780-A FD-M780-A-E FD-T780-3 FD-T780-6 FD-M785-E2 Gear FD-M785 FD-M980 FD-M670-A FD-M980-E FD-M670-A-E FD-T670-3 FD-T670-6 FD-M985-E FD-M675-E2 combination FD-M675 FD-M610 FD-M610-E FD-T610-3 FD-T610-6 FD-M615-E2 FD-M615 (w / o BB plate only) FC-M980 FC-M780 FC-M670 FC-M610 42-32-24T X X X X – – – – FC-M552 FC-M522 (BB-ES25 113 mm) FC-M782 FC-M672 40-30-22T – X – X – – – – FC-M622 FC-M612

NEW FC-M523 40-30-22T – X – X – – – – FC-M610 48-36-26T – – – – X – – – FC-T780 48-36-26T – – – – X – – – FC-M670 FC-T781 FC-T671 48-36-26T – – – – X – – – FC-T611 FC-T551 44-32-24T – – – – X – – – FC-T521 44-30T – – – – – X X – FC-M985 42-30T – – – – – X X – 40-28T – – – – – X X X FC-M980 38-26T – – – – – X – X FC-M785 40-28T – – – – – X X X FC-M675 38-26T – – – – – X – X FC-M625 FC-M615 38-24T – – – – – X – X

Down swing For triple For double Chain stay 66°- 69° 66°- 69° 66°- 69° 66°- 69° 63°- 66° 66°- 69° 66°- 69° FC Model No. angle FD-M986 FD-M986-D FD-M781-A FD-M781-A-D FD-T781-3 Gear FD-M786 FD-M786-D FD-M981 FD-M671-A FD-M981-D FD-M671-A-D FD-T671-3 combination FD-M676 FD-M676-D FD-M611 FD-M611-D FD-T611-3 FD-M616 FD-M616-D FC-M980 FC-M780 FC-M670 FC-M610 42-32-24T X X X X – – – FC-M552 FC-M522 (BB-ES25 113 mm) FC-M782 FC-M672 40-30-22T – X – X – – – FC-M622 FC-M612

NEW FC-M523 40-30-22T – X – X – – – FC-M610 48-36-26T – – – – X – – FC-T780 48-36-26T – – – – X – – FC-M670 ARCHIVE FC-T781 48-36-26T – – – – X – – FC-T671 FC-T611 FC-T551 44-32-24T – – – – X – – FC-T521 44-30T – – – – – X X* FC-M985 42-30T – – – – – X X 40-28T – – – – – X X FC-M980 38-26T – – – – – X X FC-M785 40-28T – – – – – X X FC-M675 38-26T – – – – – X X FC-M625 FC-M615 38-24T – – – – – X X *: Mount position is required for FD-M986-D used with double crankset 44T. X: Yes

All information on this page as of Jan. 7th 2015. 7 Version 1.0 Back to CONTENTS

2-5. 9-speed triple FC-FD compatibility

Speed 9-speed FD Chain line 50 mm Chainstay angle 66º - 69 º 63º - 66º FD-M772A FD-M770 FD-T660A-3 FD-M590-6 FD-M590-3 Top swing FD – FD-M770-E NEW FD-M4000-TS6 NEW FD-T4000-TS6 NEW FD-M4000-TS3 NEW FD-T4000-TS3 FD-M390-6 FC FD-M390-3 FD-M370-6 FD-M370-3 Down swing FD FD-M773 FD-M771 FD-T661-3 Chain BB Model No. / FD-M591-6 FD-M771D – NEW FD-M4000-DS6 NEW FD-M4000-DS3 FD-M591-3 line Structure FD-M371-6 FD-M661D NEW FD-T4000-DS3 FC model No. FD-M371-3

NEW FC-M4050 40-30-22T – – X – X – FC-M770 FC-M542 FC-M543K 44-32-22T X X – X – X FC-M590 FC-M591 2pc type FC NEW FC-T4060 FC-M543K FC-M590 FC-M591 48-36-26T – – – X – X

NEW FC-M4060

NEW FC-T4060 BB-ES25 (please refer chart as below FC-M521 for detailed 50 mm combination) 44-32-22T X – – X – X NEW FC-T4010 BB-ES25 126 (-K) FC-M391-8 FC-M391 BB-UN26 LL123 (-K) FC-M371

BB-ES25 118 (-E) NEW FC-M4000 40-30-22T – – X – X – BB-ES25 118 (-E) FC-M430-8 44-32-22T X X – X – X BB-UN26 LL113 (-E) FC-M430 BB-ES25 (please refer chart as below FC-M521 for detailed combination) 48-36-26T – – – X – X NEW FC-T4010 BB-ES25 126 (-K) FC-M391-8 FC-M391 BB-UN26 LL123 (-K) FC-M371 X: Yes FC-M521 / BB-ES25 combinationARCHIVE MTB (without chain case) Trekking (with chain case) E-type ABBES25AKB21W (use with 1.8 mm spacer) / ABBES25AKB21W (use without 1.8 mm spacer) / 68 mm ABBES25EB21 BB shell width ABBES25B21 ABBES25AKB21 73 mm ABBES25C21 – ABBES25EC21

8 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

2-6. 8,7,6-speed triple FC-FD compatibility

Speed 8,7-speed Chain line 50.0 mm 47.5 / 50.0 mm 47.5 / 50.0 mm Chainstay angle 66º - 69 º 63º - 66º 66º - 69º 63º - 66º 66º - 69º 63º - 66º FD-M360-6 FD-M360-3 Top swing FD FD-M410-E FD-M410-E FD-M310-6 FD-M310-3 FD-M190A-6 FD-M190-3 NEW FD-TX800-TS6 NEW FD-TX800-TS3 Down swing FD Chain line BB Model No. / Structure – – FD-M313-6 FD-M313-3 – – FC Model No. NEW NEW FC-M361-8 BB-ES25 (-K) 126 (K) 42-32-22T – – X X – – FC-M311-8 FC-M361 42-32-22T – – X X – – 50 mm BB-UN26 (-K) LL123 (-K) FC-M311

NEW FC-TX801 48-38-28T – – X X – – FC-M361 BB-UN26 (-E) LL123 (-E) 42-32-22T XX – – – – FC-M311 FC-M171-A 42-34-24T – – – – XX 47.5 + t BB-UN26-K D-NL K FC-M171 mm FC-M131 48-38-28T – – X X – –

Speed 8,7-speed 7,6-speed 7,6-speed Chain line 47.5 / 50.0 mm 47.5 / 50.0 mm 47.5 / 50.0 mm 47.5 mm Chainstay angle 66º - 69 º 63º - 66º 66º - 69º 63º - 66º 66º - 69º 63º - 66º 66º - 69º 66º - 69º FD-TX50-6 Top swing FD FD-M191-6 FD-M191-3 FD-TX50-3 FD-TX51-6 FD-TX51-3 FD-TZ30 FD-TZ31 FD-TY10* Down swing FD Chain line BB Model No. / Structure – – – – – – – – FC Model No. FC-M361-8 BB-ES25 (-K) 126 (K) 42-32-22T – – – – – – – – FC-M311-8 50 mm FC-M361 42-32-22T – – – – – – – – BB-UN26 (-K) LL123 (-K) FC-M311

NEW FC-TX801 48-38-28T XX– –XX–X FC-M171-A 42-34-24T – –XX– –X– 47.5 + t BB-UN26-K D-NL K FC-M171 mm FC-M131 48-38-28T XX– –XX–X * FD-TY10 L size is designed for 50 mm chain line. X: Yes

Note:  When using the front derailleur designed for a 7-speed system on an 8-speed system, the front derailleur plate may interfere with the chain even if its installed correctly.

How to set position for crankset with bigger top gear chain ring or bash guard in the same series.

1. Set A 2. Check if outer plate and bigger chainring have clearance 3. Reposition height of front derailleur in case problem at process (2)

Without bash guard With bash guard Pro-Set alignment block Pro-Set alignment block Gear teeth should Outer edge of bash guard come within this should come within this range range

Pro-Set gauge Pro-Set gauge A ARCHIVEA

1 mm

3 mm

All information on this page as of Jan. 7th 2015. 9 Version 1.0 Back to CONTENTS

3. Front derailleur and crankset The allowable combinations of front depend on the difference in the number of teeth of the and the shape of the front derailleur plate.

If the conditions given below are not satisfied, then the desired shiftability may not be obtained.

FC (top gear) - (low gear) ≤ FD (top and low capacity) FC (top gear) - (middle gear) ≤ FD (allowance of difference in teeth number between top and middle)

Front derailleurs and the number of teeth for corresponding are given in the chart. 4. Front derailleur and chain line (Tourney) The Shimano line-up for front derailleurs and the chain lines they support are given in the chart below.

28.6 mm (S) 31.8 mm (M) 34.9 mm (L)

FD-TY10 ø47.5 ø50.0 Chain line (mm) FD-TZ31 ø47.5 – FD-TZ30 5. Crankset, bottom bracket and chain line In order to use SIS to its full extent, the required correct chain line, along with the crankset and bottom bracket required to obtain that, are given in the chart below.

5-1. MTB components (separate type FC / BB)

Crankset Bottom bracket Chain line and axle mark Speed Series Type of crank Model No. Model No. 47.5 mm 50.0 mm 52.5 mm 47.5+t mm OCTALINK Square Chaincase

NEW FC-M523 X – – BB-ES25 – 118 – – 10 SHIMANO FC-M522 X – – BB-ES25 – 113 – – FC-M521 X – X* BB-ES25-AK – ** – –

NEW FC-M4000 X – – BB-ES25(-E) – 118(-E) – –

NEW FC-T4010 X – X* BB-ES25(-K) – 126(-K) – – ALIVIO FC-M430-8 X – – BB-ES25(-E) – 118(-E) – – 9 FC-M430 – X – BB-UN26(-E) – LL113(-E) – – FC-M391-8 X – X* BB-ES25(-K) – 126(-K) – – Acera FC-M391 – X X* BB-UN26(-K) – LL123(-K) – – SHIMANO FC-M371 – X X* BB-UN26(-K) – LL123(-K) – – FC-M361 Acera – X X* BB-UN26(-K) – LL123(-K) – – FC-M311 8, 7 ALTUS FC-M311-8 X – X* BB-ES25(-K) – 126(-K) – –

Tourney NEW FC-TX801 – X X* BB-UN26(-K) – LL123(-K) – – FC-M131 8, 7, 6 SHIMANO FC-M171 – X X BB-UN26(-K) D-NL(122.5) – – D-NL(122.5) FC-M171-A X: Yes Note: If using a chain case, select a BB- (-K) / -K bottom bracket. If using an E-type frontARCHIVE derailleur, select a BB- (-E) bottom bracket. *: Chain case stay thickness should be 1.5 mm to 2.1 mm. **: Please refer to page 8 for detailed combination. Note: FC-M521: Use 121AK with 1.8 mm spacer if no chain case used.

10 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

5-2. Capreo series components The combinations of the crankset and the bottom bracket to obtain proper chain line, which are necessary for the SIS (= Shimano indexed system) to function well, are presented in the following chart.

Series Crankset Bottom bracket Chain line and axle mark Type of crank Model No. Model No. 47.5 mm 50.0 mm 52.5 mm 47.5+t mm OCTALINK Square Chaincase Capreo BB-UN26 MM110 LL113 YL117 – FC-F800 – X X BB-UN26-K – – – *117.5 X: Yes Note: This specification can be used without the chain case as 52.5 mm chain line. In that case, a space is to be left between the shell and the adapter on the left side of the BB, but there is no problem in actual use.

ARCHIVE

All information on this page as of Jan. 7th 2015. 11 Version 1.0 Back to CONTENTS

6. Chain, chainring and cassette sprocket The allowable combinations for the Shimano chain (CN), chainrings (FC), and cassette (CS) are given in the chart below. These chains are available in order to match the type of drivetrain. Select the combination you desire after checking the chart below.

9-speed 7, 8-speed

CS FC CS FC

FC-M770 FC-M665 FC-M591 FC-M590 FC-M543-K FC-M542 FC-M361 CS-M770 CS-HG51-8 FC-M521 FC-M311 CS-HG80-9 CS-HG41-8 NEW FC-M4060 FC-M311-8 CS-HG50-9 CS-HG31-8 FC / CS NEW FC-M4050 NEW FC-TX801 NEW CS-HG400-9 NEW CS-HG200-8 NEW FC-T4060 FC-M171 NEW CS-HG300-9 CS-HG41-7 NEW FC-M4000 FC-M171-A NEW CS-HG200-9 CS-HG20-7 NEW FC-T4010 FC-M131 FC-M430 FC-M430-8 FC-M391 FC-M391-8 FC-M371

9-speed

CN-HG93 X X – – CN-HG73 CN-HG53

CN

NEW CN-HG71 – – X X CN-HG40

ARCHIVE

12 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS Drivetrain for road bike components 1. Rear drivetrain compatibility

ST RD CS CN FH

2x11-Speed RD-9000 Dura-Ace ST-9001 RD-6800-SS ST-9000 9000 series NEW RD-5800-SS SL-BSR1 23T≤CS Low gear≤28T ULTEGRA ST-6800 RD-6800-GS 6800 series NEW ST-5800 CN-9000 FH-9000 NEW RD-5800-GS 105 NEW ST-RS685 CS-9000 CN-6800 28T≤CS Low gear≤32T FH-6800 CS-6800 NEW CN-HG900-11 5800 series FH-CX75 NEW CS-5800 NEW CN-HG700-11 NEW FH-5800 NEW CN-HG600-11 ST-9070 RD-9070-SS ST-9071 RD-6870-SS ST-6870 23T≤CS Low gear≤28T ST-6871 RD-6870-GS ST-R785 28T≤CS Low gear≤32T

ARCHIVE

All information on this page as of Jan. 7th 2015. 13 Version 1.0 Back to CONTENTS

ST RD CS CN FH*

RD-6700-A-SS CS-6700 (23T≤low gear≤30T) FH-6700 FH-5700 FH-5600 CS-5700 CN-7901 RD-5701-SS CN-6701 FH-4600 RD-4601-SS CS-4600 CN-5701 FH-3500 (25T≤low gear≤30T) FH-2400 CN-4601 (130 mm O.L.D.) 2x10-Speed ST-6700 CS-5700 CS-4600 ULTERGA ST-5700 RD-5701-GS FH-R505 CS-HG81-10 (135 mm O.L.D.) 6700 series ST-4600 RD-4601-GS CS-HG62-10 105 ST-R460 (27T≤low gear≤32T) CS-M771-10 5700 series CN-M981 CN-M980 Tiagra RD-R350-10-SS CS-M980 4600 series (30T≤low gear≤34T) CS-M771-10 CN-HG95 CS-HG81-10 CN-HG94 CS-HG62-10 CN-HG75 CS-6700 CN-HG74 CS-4600 CN-HG54

3x10-Speed RD-6700-A-GS CN-7801 ULTERGA (23T≤low gear≤30T) CS-6700 CN-6600 6700 series CN-5600 ST-6703 105 ST-5703 RD-5701-GS CS-5700 5700 series ST-4603 RD-4601-GS CS-4600 Tiagra (25T≤low gear≤30T) 4600 series

2x9-Speed CS-HG50-9 CN-7701 FH-6700 RD-3500-SS CN-HG93 FH-5700 SORA ST-3500 CS-HG30-9 (25T≤low gear≤32T) CN-HG73 FH-5600 3500 series CS-HG20-9 CN-HG53 FH-4600 FH-3500 FH-2400 ST-3503 RD-3500-GS (130 mm O.L.D.) (25T≤low gear≤32T) FH-R505 (135 mm O.L.D.) * Recommended 3x9-Speed CS-HG50-9 CN-7701 chain stay length: ST-R353 RD-R350-GS CS-HG30-9 CN-HG93 405 mm or longer SORA (25T≤low gear≤32T) CN-HG73 (O.L.D. 130 mm), 3500 series CS-HG20-9 CN-HG53 430 mm or longer (O.L.D. 135 mm)

2x8-Speed ST-2400 RD-2400-SS Claris (25T≤low gear≤32T) CN-HG91 2400 series NEW CN-HG71 CS-HG50-8 CN-HG50 3x8-Speed CN-HG40 CN-UG51 ST-2403 RD-2400-GS Claris (25T≤low gear≤32T) 2400 series

ST-2300 2/3x8-speed RD-2300 CS-HG50-8 ST-2303 (21T≤low gear≤26T) 2300 series ARCHIVE

ST-A070 CS-HG20-7 (12-28T) RD-A070 FH-RM30-7 CS-HG41-7 (11-28T) NEW CN-HG71 ST-A073 CN-HG50 (O.L.D.=130) 2/3x7-Speed CN-HG40 Tourney CN-UG51 A070 series SL-A050-7R/LN MF-TZ21 (14-28T) A050 series RD-A050 SL-SY20A MF-HG37 (13-28T)

14 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

2. Front drivetrain compatibility

ST FD FC CN BB

2x11-Speed ST-9001 FD-9000 Dura-Ace SL-BSR1 (not compatible ST-6800 with 46T) 9000 series NEW ST-5800 FD-6800 ULTEGRA FC-9000 CN-9000 NEW ST-RS685 NEW FD-5800 CN-6800 11-speed 6800 series FC-6800 NEW CN-HG900-11 105 NEW FC-5800 ST-9070 NEW CN-HG700-11 5800 series NEW FC-RS500 SL-9071 NEW CN-HG600-11 FD-9070 ST-6870 FD-6870 ST-6871 ST-R785

ST FD FC CN BB FC-6700 FD-6700 FC-6700G FD-5700 FC-6750 FC-6750G FC-5700 CN-7901 SM-BB9000 FC-5750 CN-6701 SM-BBR60 FC-4600 CN-5701 SM-BB6700 Double FD-4600 FC-4650 CN-4601 SM-BB5700 (50T≤top FC-R565 ULTEGRA ST-6700 gear≤56T） SM-BB4600 6700 series ST-5700 (Threaded type) FD-CX70 FC-CX70 105 ST-4600 FC-CX50 5700 series ST-R460 SM-BB92-41B Tiagra SM-BB72-41B 4600 series FD-4600 FD-R460 CN-M981 SM-BB71-41B Note: CN-M980 (Press-fit type)

10-Speed Recommended CN-HG95 chain stay length: FC-R460 (46-34T) CN-HG94 405 mm or longer FC-R460 (48-34T) (O.L.D. 130 mm), CN-HG75 430 mm or longer CN-HG74 (O.L.D. 135 mm) CN-HG54 CS angle 63 - 66

Triple FC-6703 FD-6703 FC-6703G ULTEGRA ST-6703 6703 series CN-7801 ST-5703 105 CN-6600 ST-4603 FC-5703 5703 series FD-5703 CN-5600 FC-4603 Tiagra FD-4603 4600 series FC-R563

Double FC-3550 SORA ST-3500 FD-3500 3500 series FC-R345 CN-7701 FC-R350 CN-HG93 CN-HG73

9-Speed Triple CN-HG53 ST-3503 FD-3503 FC-3503 BB-ES25 SORA ST-R353 FD-R353 FC-R453 (OCTALINK) 3500 series

Double FC-2450 ST-2400 (OCTALINK) Claris ST-2300 FD-2400 FC-2300 2400series ST-R240 FD-2300 FC-2350 ARCHIVE(Square type) 2300 series Triple 8-Speed ST-2403 FC-2403 (OCTALINK) Claris ST-2303 FD-2403 FD-2303 FC-2303 BB-ES25 2400 series ST-R243 CN-HG91 (Square type) (OCTALINK) 2300 series NEW CN-HG71 CN-HG50 BB-UN26 CN-HG40 Double FC-A070 (50-34T) (Square type) ST-A070 FD-A070A (Square type) CN-UG51 Tourney A070 series A050 series SL-A050-LN FD-A050 SL-SY20A

7-Speed Triple Tourney ST-A073 FD-A073 FC-A073 A070 series (Square type)

All information on this page as of Jan. 7th 2015. 15 Version 1.0 Back to CONTENTS

3. Brake systems compatibility

ST / BL BR ST/BL BR

BR-9000 BR-9010 BR-9010 BR-9000 BR-7900 BR-7900 BR-6800 BR-6810 ST-9070 BR-6810 BR-6800 ST-9071 BR-5800 BR-5800 ST-9001 BR-5810 BR-5810 ST-9000 BR-5710 BR-5710 ST-6870 BR-5700 BR-5700 ST-6871 BR-4600 BR-4600 ST-6800 BR-3500 BL-4600 BR-3500 ST-6770 BR-R561 BL-3500 BR-2400 ST-5800 BR-2400 BL-R780 BR-R561 ST-5700 BL-2400 ST-4600 ST-R240 ST-3500 BR-CX70 BR-CX70 BL-TT79 BR-CX50 BR-CX50 ST-2400 ST-R460 BR-CX77 BR-CX77 ST-R353 BR-R517 BR-R517 ST-R350 BR-R317 BR-R317

BR-R573 BR-R573 BR-R463 BR-R463 BR-R353 BR-R353

BR-R650 BR-R650 ST-A070 BR-R451 BL-R550 BR-R451 ST-A073 BR-R450 BR-R450 BR-R550 BR-R550

: Braking power is slightly less than standard combination. : The “NO!” symbols indicate combinations that should not be used under any circumstances.

ARCHIVE

16 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

4. Compatibility for flat handlebar 4-1. Rear system SL RD CS CN FH*

RD-9000 2x11-Speed FH-9000 Dura-Ace RD-6800-SS CN-9000 FH-6800 NEW RD-5800-SS CS-9000 CN-6800 9000 series NEW FH-5800 SL-RS700 (23T≤CS Low gear≤28T) NEW CN-HG900-11 ULTEGRA NEW CS-6800 (130 mm O.L.D.) NEW CN-HG700-11 6800 series RD-6800-GS NEW CS-5800 NEW CN-HG600-11 FH-CX75 105 NEW RD-5800-GS (135 mm O.L.D.) 5800 series (28T≤CS Low gear≤32T)

RD-6700-A-SS (23T≤low gear≤30T) CS-6700 CN-7901 CN-6701 RD-5701-SS CN-5701 FH-6700 2x10-Speed CS-5700 CN-4601 RD-4601-SS CS-4600 FH-5700 ULTEGRA (25T≤low gear≤30T) FH-4600 6700 series SL-R780 SL-4600 FH-3500 105 SL-R460 (130 mm O.L.D.) 5700 series CN-M981 CS-M980 CN-M980 Tiagra CS-M771-10 FH-R505 CN-HG95 (135 mm O.L.D.) 4600 series RD-R350-10 CS-HG81-10 CN-HG94 (30T≤low gear≤34T) CS-HG62-10 CN-HG75 CS-6700 CN-HG74 CS-4600 CN-HG54

3x10-Speed RD-6700-A-GS CS-6700 ULTEGRA (23T≤low gear≤30T) CN-7801 6700 series SL-R783 CN-6600 105 SL-4603 CN-5600 5700 series RD-5701-GS RD-4601-GS CS-5700 Tiagra (25T≤low gear≤30T) CS-4600 4600 series

2x9-speed CN-7701 FH-6700 RD-3500-SS FH-5700 SORA SL-3500 (25T≤low gear≤32T) CN-HG93 CN-HG73 FH-4600 3500 series FH-3500 CN-HG53 (130 mm O.L.D.) 3x9-Speed CS-HG50-9 SL-3503 RD-3500-GS CS-HG30-9 FH-R505 (25T≤low gear≤32T) (135 mm O.L.D.) SORA CS-HG20-9 * Recommended CN-7701 chain stay length: CN-HG93 405 mm or longer RD-R350-GS (O.L.D. 130 mm), SL-R353 (25T≤low gear≤32T) CN-HG73 430 mm or longer CN-HG53 (O.L.D. 135 mm)

2x8-speed SL-2400 RD-2400-SS FH-5700 ARCHIVEFH-4600 Claris ST-R240 (25T≤low gear≤32T) CN-HG91 FH-3500 2400 series NEW CN-HG71 CS-HG50-8 CN-HG50 FH-2400 3x8-speed CN-HG40 (130 mm O.L.D.) SL-2403 RD-2400-GS CN-UG51 FH-R505 Claris ST-R243 (25T≤low gear≤32T) (135 mm O.L.D.) 2400 series

All information on this page as of Jan. 7th 2015. 17 Version 1.0 Back to CONTENTS

4-2. Front system

SL FD FC CN BB

2x11-Speed CN-9000 SM-BB9000 Dura-Ace FD-9000 FC-9000 (not compatible CN-6800 SM-BB92-41B 9000 series with 46T) FC-6800 NEW SL-RS700 NEW CN-HG900-11 SM-BBR60 ULTEGRA FD-6800 NEW FC-5800 NEW CN-HG700-11 SM-BB72-41B 6800 series NEW FC-RS500 NEW FD-5800 CN-HG600-11 SM-BB4600 105 NEW 5800 series

FC-6700 FD-6700 FC-6700G FD-5700 FC-5700 FC-5750 CN-7901 2x10-Speed FC-4600 CN-6701 FC-4650 CN-5701 SM-BB6700 ULTEGRA FC-R565 CN-4601 SM-BB5700 SL-R780 6700 series SM-BB4600 SL-4600 105 SL-R460 FD-4600 Note: 5700 series FD-CX70 Recommended Tiagra FC-CX70 chainstay length: FC-CX50 405 mm or longer 4600 series (O.L.D. 130 mm), CN-M981 430 mm or longer CN-M980 (O.L.D. 135 mm) CN-HG95 FC-R460 CN-HG94 FD-4600 (46-34T) CN-HG75 FD-R460 FC-R460 CN-HG74 (48-34T) CN-HG54

3x10-Speed FC-6703 FD-6703 FC-6703G ULTEGRA CN-7801 6700 series SL-R783 CN-6600 105 SL-4603 5700 series FC-5703 CN-5600 FD-5703 Tiagra FC-4603 FD-4603 4600 series FC-R563

FC-3550 2x9-Speed FC-R350 SL-3500 FD-3500 SORA FC-R450 3500 series FC-R345

3x9-Speed SL-3503 FD-3503 FC-3503 SORA SL-R353 FD-R353 FC-R453 3500 series

SL-2400 ARCHIVEFD-2400 FC-2450 2x8-Speed ST-R240 Claris 2400 series SL-R441 FC-2300 2300 series FD-R440A ST-R221 FC-2350

SL-2403 FD-2403 FC-2403 3x8-Speed ST-R243 Claris 2400 series 2300 series ST-R225 FD-R443A FC-2303

18 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS Disc brake 1. Disc brake caliper and Rotor compatibility

Rotor size Caliper Pad material 140 mm (SS) 160 mm (S) 180 mm (M) 203 mm (L)

NEW BR-M9000 NEW BR-M9020 SM-RT99-S SM-RT99-M SM-RT99-L BR-M785 Metal / Resin SM-RT86-S SM-RT86-M SM-RT86-L BR-M675 SM-RT81-S SM-RT81-M SM-RT81-L BR-M615 SM-RT99-SS Narrow SM-RT68-S Narrow SM-RT68-M Narrow SM-RT68-L Narrow Type Type Type Type SM-RT76-S SM-RT76-M SM-RT76-L BR-M820 Metal / Resin SM-RT64-S SM-RT64-M SM-RT64-L BR-M640 SM-RT66-S SM-RT66-M SM-RT66-L BR-S700 Resin BR-T675 BR-T615 NEW BR-M4050 BR-M447 NEW SM-RT20-S NEW SM-RT20-M BR-M446 SM-RT30-S SM-RT30-M BR-M416-A Resin – Wide Type Wide Type – SM-RT54-S SM-RT54-M BR-M395 SM-RT56-S SM-RT56-M BR-M375 NEW BR-M355 NEW BR-TX805 BR-R317 SM-RT99-S BR-R785 SM-RT86-S Metal / Resin SM-RT99-SS Narrow Narrow – – NEW BR-RS785 Type SM-RT81-S Type SM-RT68-S SM-RT98-S SM-RT86-S SM-RT81-S BR-CX77 Metal / Resin – SM-RT76-S Narrow – – BR-R517 Type SM-RT75-S SM-RT64-S SM-RT66-S Note: 1. Suitable mount adapter is necessary according to your frame mount style. 2. SM-RT56 / SM-RT54 / SM-RT30 / SM-RT20 are compatible with Resin pad caliper specification only. If use with metal pads, rotor will be easily damaged. 3. When using 140mm rotor, braking power is less than 160 mm, please confirm the power is enough for your purpose. 140 mm rotor is recommended for rear use only. 4. Durability of B / E-type pad become shorter when the pad is used with narrow type rotor. 5. Narrow type 2piece rotor are not compatible to caliper for Wide type rotor because of interference. 6. Wide rotor Narrow rotor ARCHIVE Interference between brake caliper and adapter of rotor Do not use these combinations for a reason of interference between brake caliper and adapter of rotor.

Rotor Caliper 140 mm (SS) 160 mm (S) 180 mm (M) 203 mm (L) BR-T675 BR-T615 SM-RT99 SM-RT99 NEW BR-M4050 SM-RT86 SM-RT86 BR-M447 SM-RT99 SM-RT99 SM-RT81 SM-RT81 BR-M446 SM-RT76 SM-RT76 BR-M395 NEW BR-M355

All information on this page as of Jan. 7th 2015. 19 Version 1.0 Back to CONTENTS

2. Combination chart (Mechanical Disc) 2-1. Mechanical Disc Brake combination chart In order to realize the best performance, we recommend that the following combination be used.

Series Caliper Mount type Brake lever Rotor Pad BR-M416-A SM-RT54 SM-RT56 V-BRAKE BL BR-M375 * SM-RT30 NEW SM-RT20 B01S Resin (2 finger) NEW BR-TX805 for resin pad only

SHIMANO BR-R517 * Road lever** SM-RT64 / 66 G01S Resin BR-R317 * Road lever** SM-RT54 / 56 G01S Resin G01A Resin / BR-CX77 * Road lever** SM-RT81 / 86 G03Ti Metal * Front mount: International standard / Post mount Rear mount: International standard ** For BL-R780 / 4600 / 5700 / 4600

2-2. Mechanical Disc brake and Brake lever compatibility

Brake lever type Model No. 3,4 finger w / modulator 2 finger 3,4 finger w / SM-PM50 BR-M416-A X – X BR-M375 X – X

NEW BR-TX805 X – X

ARCHIVE

20 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS V-BRAKE and Hub roller brake 1. Compatibility between brake systems Depending on the brake and brake lever combination to be used, the relationship between the input at the brake lever and the actual braking force output at the wheels is very easily affected.

Be very careful when combining a brake and brake lever. Incorrect combinations can cause accidents or insufficient braking forces due to improper cable strokes. Be sure to carefully consult the chart below and select the brake and the matching brake lever.

V-BRAKE Brakes With power modulator model BR-T780 with SM-PM70 BR-R463 BR-T670 with SM-PM70 BR-R573 BR-T780 BR-T610 with SM-PM70 BR-T670 Roller Brake BR-MX70 NEW BR-T4010 with SM-PM40 BR-T610 BR-R353 NEW BR-T4000 with SM-PM40 NEW BR-T4010 BR-R353 with SM-PM40 NEW BR-T4000 Brake levers BR-R463 with SM-PM40 BR-R573 with SM-PM70

V-BRAKE Levers (2-finger) NEW ST-M4000 NEW ST-EF41 BL-T610 NEW ST-TX800 ST-M370 BL-M571 X X Note ST-M310 NEW BL-T4000 ST-EF65 BL-MX70 ST-EF51 ST-EF51-A

V-BRAKE Levers (3-finger) NEW ST-T4000 BL-T780 BL-T611 BL-T670 X BL-T780-B NEW BL-T4010 BL-T670-B V-BRAKE Levers with switch BL-4600 ST-R240 BL-R780 X X BL-3500 BL-2400 Brake lever with switch ST-M310 (4-finger) SB-7S45 ST-EF65 (4-finger) BL-IM45 ST-EF51 (4-finger) BL-IM65 X X ST-EF51-A (4-finger) BL-IM60 SB-8S20 NEW BL-C6000 ST-8S20

Levers for Roller Brake X

X: Yes

The “NO!” symbols indicate combinations that should ARCHIVEnot be used under any circumstances.

Note: This combination will not provide the sufficient amount of braking force.

All information on this page as of Jan. 7th 2015. 21 Version 1.0 Back to CONTENTS

2. Brake lever with switch compatibility Four finger brake levers such as brake levers are equipped with a switch to change between the V-BRAKE with modulator mode (for example with SM-PM40) and the caliper brake or roller brake mode.

2-1. For V-BRAKE (with power modulator) mode

V-position

V V-BRAKE with power modulator

V V-BRAKE + SM-PM40 C R

V-BRAKE without power modulator

Roller brake / Caliper brake

2-2. For Caliper brake / Roller brake

Caliper/Roller (C R) brake-position V V-BRAKE with power modulator V C R V-BRAKE + SM-PM40

C R

V-BRAKE without power modulator

Roller brake / Caliper brake Some models can't be used with roller brake, ARCHIVEplease refer to page 21 for more information. Warning: If the mode is not matched to the type of brake being used, this could result in inadequate or excessive braking power. Please proceed with caution when selecting the correct mode for the corresponding brake.

22 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS Comfort components Compatibility for comfort bike components 1. Combinations of the rear gear, cassette sprocket, and crankset for designing the frame

A B C D

Dropout design Compatibility FC CN A: Reversed (Track end, w / o RD mount) NR: Not recommend E: FC-NX75 H: CN-NX10(1 / 2””x1 / 8””) or B: Standard ( w / o RD mount ) F: FC-S501 / S400 : Double guard spec HG 8S(1 / 2””x3 / 32””) C: Adjustable Disc brake mount / Eccentric BB G: FC-S501 / S400 : Single guard spec I: Super Narrow HG 9S D: Vertical dropout ( Road bike type, w / RD J: HG 8S(1 / 2”x3 / 32”) mount )

Brake Dropout CS / SM additional Series Speed Compatibility CT use FC CN type design -GEAR condition A NR – – – – *1 B NR – – – – Disc use C OK – SM-GEAR G J OK CT-S500 CS-S500 F I D OK CT-S510 SM-GEAR G J ALFINE 11S / 8S A OK – SM-GEAR G J B OK – SM-GEAR G J V-BR use C OK – SM-GEAR G J OK CT-S500 CS-S500 F I D OK CT-S510 SM-GEAR G J E H A OK – SM-GEAR G J E H B OK – SM-GEAR G J HRB / V-BR E H C OK – SM-GEAR G J NR CT-S500 CS-S500 F I *2 D 8S / 7S / 3S OK CT-S510 SM-GEAR G J (except 3D) E H A OK – SM-GEAR G J E H B OK – SM-GEAR G J Coaster E H Nexus C OK – SM-GEAR G J NR CT-S500 – – – *3 D NR CT-S510 – – – *4 ARCHIVEA NR – – – – *1 B NR – – – – Disc use C OK – SM-GEAR G J OK CT-S500 CS-S500 F I D OK CT-S510 SM-GEAR G J 3D A OK – SM-GEAR G J B OK – SM-GEAR G J V-BR use C OK – SM-GEAR G J OK CT-S500 CS-S500 F I D OK CT-S510 SM-GEAR G J *1: Special disc brake mount design is needed. *2: without chain guard for hub gear side. *3: Structure of CT-S500 can't transfer chain tension by back pedalling. *4: Not enough force of fixation against back pedalling power.

All information on this page as of Jan. 7th 2015. 23 Version 1.0 Back to CONTENTS Electronic Product Information 1. E-tube compatibility chart E-tube compatibility chart This chart shows E-tube device compatibility based on latest version firmware as of Nov. 1st, 2014. Please see the following site for more E-tube information. http://e-tubeproject.shimano.com/ Master unit firmware for Road/ Comfort/ MTB category is ver. 3.0 When any device which is not shown in this compatibility chart is connected, all components don't work.

Road Comfort

External battery Built-in battery External battery Built-in battery Master unit SM-BMR1 SM-BMR1 1 unit from this group SM-BTR2*2 SM-BTR2*2 SM-BMR2 SM-BMR2

4 5 Junction (A) SM-EW90-A SC-M9050* * SM-EW67-A-E*2 SC-S705*1 SM-EW90-B SC-S705 SM-EW90-A*5 1 unit from this group SC-M9050*4 SM-EW90-B*5 Sprint Switch SW-R610

ST-9070-L* ST-9070-R* ST-9070-L* ST-9070-R* ST-6870-L* ST-6870-R* ST-6870-L* ST-6870-R*

ST-9071-L ST-9071-R ST-9071-L ST-9071-R ST / SW ST-6871-L ST-6871-R ST-6871-L ST-6871-R ST-6770-L ST-6770-R ST-6770-L ST-6770-R Max. 6 unit from ST-R785-L ST-R785-R ST-R785-L ST-R785-R this group - ST-S705-R*6 - ST-S705-R SW-9071-L SW-E6000*6 SW-9071-R SW-9071-L SW-E6000 SW-9071-R - (for shift) SW-R600 - (for shift) SW-R600 SW-R671-L SW-R671-R SW-R671-L SW-R671-R - SW-S705*6 - SW-S705 SW-M9050-L SW-M9050-R SW-M9050-L SW-M9050-R

Rear shifting 10-speed 11-speed 8-speed 11-speed system RD-9070 RD-6770 MU-S705 1 unit from this group RD-6870

Front shifting 10-speed 11-speed system FD-9070 FD-6770 1 unit from this group FD-6870

PC linkage device SM-PCE1 SM-PCE1 1 unit from this group ARCHIVESM-BCR2*2 SM-BCR2*2 Wireless unit SM-EWW01

Limitation of function *1 SC-S705 • Front derailleur position will not appear on display • SC-S705 has only 1 E-tube port for ST / SW • Recovery from Rear derailleur protection function is not available • SC-S705 may not turn on the display by • Front / Rear derailleur adjustment mode is not available. Use E-tube project software front shifting switch *2 SM-BCR2 requires any device which has charging connector. SM-EW67-A-E (Junction (A)) is not compatible with SM-BCR2 and SM-BTR2. *3 SC-M9050 is required for synchronized shift *4 Synchronized shift is available only in MTB category *5 Front / Rear derailleur adjustment mode is not available in "Comfort" category *6 Only for rear shifting

24 All information on this page as of Jan. 7th 2015. Version 1.0 Back to CONTENTS

MTB E-BIKE

External battery Built-in battery Master unit DU-E6000 SM-BMR1 EW-EX010 1 unit from this group SM-BTR2*2 DU-E6001 SM-BMR2

Junction (A) SM-EW90-A*3 SC-M9050 SC-E6000 1 unit from this group SM-EW90-B*3 Sprint Switch SW-R610

ST-9070-L* ST-9070-R* ST-6870-L* ST-6870-R* ST-9071-L ST-9071-R ST-6871-L ST-6871-R SW-E6000*6 (for assist) ST / SW ST-6770-L ST-6770-R SW-E6000 (for shift) ST-R785-L ST-R785-R Max. 6 unit from SW-S705 7 this group - ST-S705-R* SW-M9050-L SW-9071-L SW-E6000*7 SW-9071-R SW-M9050-R - (for shift) SW-R600 SW-R671-L SW-R671-R - SW-S705*7 SW-M9050-L SW-M9050-R

Rear shifting RD-M9050-SGS MU-S705 system RD-M9050-GS 1 unit from this group

Front shifting system FD-M9050 FD-M9070 1 unit from this group

PC linkage device SM-PCE1 SM-PCE1 1 unit from this group SM-BCR2*2

Wire less unit SM-EWW01

Suspension Front fork FOX #820-00-876 FOX #820-09-002 1 unit from this group

Suspension Rear Shock FOX #820-00-877 FOX #820-09-010 1 unit from this group

Suspension control switch FOX #820-00-878 FOX #820-09-006 1 unit from this group ARCHIVE Limitation of function *1 SC-S705 • Front derailleur position will not appear on display • Recovery from Rear derailleur protection function is not available • Front / Rear derailleur adjustment mode is not available. Use E-tube project software • SC-S705 has only 1 E-tube port for ST / SW • SC-S705 may not turn on the display by front shifting switch *2 SM-BCR2 requires any device which has charging connector. SM-EW67-A-E (Junction (A)) is not compatible with SM-BCR2 and SM-BTR2. *3 SC-M9050 is required for synchronized shift *4 Synchronized shift is available only in MTB category *5 Front / Rear derailleur adjustment mode is not available for MU-S705 *6 Available switch for SHIMANO STEPS assist control is SW-E6000 (for assist mode). It doesn't work as assist control switch for other E-BIKE system via EW-EX010 *7 Only for rear shifting (RD & IHG)

All information on this page as of Jan. 7th 2015. 25 Version 1.0