Introduction

Fairhaven H&V Services have been supplying Building Services equipment to the Northern Ireland construction industry for over 18 years, more recently specialising in Ventilation products for the commercial and industrial sectors.

We are sole NI agents for several well-established manufacturers. Our product range includes air distribution & diffusers from Colman Moducel & HVC, industrial, commercial & domestic fans from S&P and Greenwood, Air Handling Units by Uniflo & Airforce, AIRIUS de- stratification fans and much, much more.

Our key strengths

x Large range of quality products at competitive prices x Experienced technical advice on product selection and system design x Fast turnaround of enquiries x Short lead-times - Many product ranges supplied from stock at our warehouse x Carriage to works or site included in all prices x Comprehensive after-sales support service – on-site where required

How to contact us

email: [email protected] 3 Glenavy Road web: www.fairhavenservices.co.uk Moira Craigavon telephone: (+44) 28 92611648 Co. Armagh BT67 0LT fax: (+44) 28 92611997

Product Overview 2010 Product Range Soler & Palau Air Movement Products

You will probably have seen some of S&Ps products before, albeit with a different name on the box. Fans - Industrial, Commercial and Domestic S&P (Soler & Palau) are one of the world’s largest manufacturers of fans for commercial, domestic and industrial Grilles and Diffusers & External Louvres applications, with factories in the Spain, UK, France, Italy, and the Air Handling Units USA. S&P products are sold all over the globe, however until recently in the UK most of their fans were sold under other brand Heat Recovery Ventilation Units names. The core industrial & commercial range consists primarily of the De-stratification fans following product lines:

Evaporative Cooling Systems x TD MIXVENT inline mixed flow fans x VENT inline centrifugal fans Weld & Fume extract systems x HC and HX series plate fans x TC and TX and cased axials (inc medium pressure twin Roof Cowls & Roof extract fans impeller units) x CAB & CVB series acoustic inline cabinet fans Twin- Boxed Extract Units x EBB, DÉCOR & SILENT wall fan ranges

Stainless Steel Kitchen Canopies Quality of construction is second to none, and S&Ps fans generally out-perform the competition in terms of airflow at a given Fire and Volume Control Dampers pressure.

In addition to the above, we can advise on selection of products Attenuators and Products from the full S&P portfolio, which includes high pressure centrifugal blowers, roof mounted extract fans, high Controls smoke extract fans and impulse fans for car park ventilation.

To complement the fans, we offer all the usual accessories (silencers, speed controllers, mounting kits, etc) for a complete installation. This now includes S&Ps new ECOWATT Demand Control Ventilation system which provides trickle/boost operation, proportional control based on multiple sensors, or constant pressure control for maximum efficiency and lower running costs.

For more details, refer to the relevant S&P catalogue, contact us at Fairhaven, or go to www.solerandpalau.co.uk . Greenwood Air Movement Products Product Focus S&P TD inline mixed flow fans

S&P’s TD range of inline mixed Greenwood specialises in the design and manufacture of domestic and flow fans boasts the most commercial ventilation products, offering leading solutions for both trade comprehensive choice of and retail sectors. With over 120 years experience, the company have models and sizes on the market established a strong reputation in the market with products specified today. The standard AC range through major developers and contractors in the UK's domestic New Build consists of 18 models from and Refurbishment sectors, where simplicity in application and value based 100mm up to 400mm dia, with products are key requirements. built in run-on timers available The domestic product range includes an extensive selection of SAP on units up to 200mm dia. Appendix Q rated mechanical ventilation systems and unitary fans, whilst In terms of performance, the TD range is class leading. The graph below shows the performance the core of the commercial range is the versatile “ECO” range of reversible of the best selling unit, the TD-500/150, compared to the most common competitor models fans.

150mm In-line Mixed Flow Fans - Performance comparison 300 VA ACM150 Product Focus ECO range 250 TD-500/150 200 Elta SMT150 Vortice Lineo 150 V0 Greenwood’s Eco range of commercial fans are offered with a comprehensive range of integral 150 and remote sensors, all suitable for commercial premises where control of air quality is vital.

100 The range consists of three sizes of basic fan unit (6”, 9” and Pressure (Pa) Pressure 50 12”), each available in 5 different variants, for window, wall, ceiling, flat and pitched roof applications. All units provide 0 either supply or extract at the touch of a button via the optional 0 0.05 0.1 0.15 0.2 Airflow (m3/sec) wall mounted controller, and all units come as standard with thermo-actuated backdraught shutters The TD-ECOWATT low energy DC powered versions are available in 100, 125, 150 and -1 Commercial Wall Fans - Performance comparison 200mm sizes, and offer specific fan powers from as low as 0.19 W.s.litre , whilst still providing 140 the same market leading performance levels as the standard range. 120 Vent Axia TX12WL Greenwood CD12WA They are fully speed controllable from 10% to 100% of max 100 Vortice Vario 300/12" duty, and their low power consumption when running at 80 reduced speed makes them ideal for use with the Ecowatt DCV 60 (demand controlled ventilation) system.

Pressure (Pa) Pressure 40 No other range of inline mixed flow fans provides the same combination of performance, 20 choice, efficiency, quality and value for money. 0 0 500 1000 1500 2000 Airflow (m3/sec) Colman Moducel Air Distribution HVC Air Distribution Products

Colman Moducel (previously Senior Colman) is one of the most respected names HVC Supplies have grown to become a significant manufacturer of air distribution in air distribution products, with over 50 years experience in the manufacture of equipment and now produce a comprehensive range of grilles, diffusers and louvres high quality grilles, diffusers & external louvres. at competitive prices. Recent additions to their portfolio include a range of natural

The range of Colman products is extensive to say the least; from linear ventilation products including uPVC dampers compatible with their range of slot diffusers through circular swirl diffusers to security grilles. weatherproof louvres and internal air terminals. In addition to the essentials such as 4-way louvred face diffusers, eggcrate grilles, In addition to standard products Colman offers a design facility to etc, the range includes: produce customised designs to suit even the most ambitiously designed x Drum jet diffusers building without compromising performance or aesthetic appearances x Non vision and light tight transfer grilles Through Fairhaven, Colman offers a total package supported by x Computer floor grilles and reinforced linear grilles experienced sales staff, able to select or design a solution to meet x Laminar flow panels & perforated diffusers individual requirements. For more information on the complete range x Swirl diffusers of Colman air distribution products, contact us at Fairhaven or go to At Fairhaven we have been supplying HVC products to the Northern Ireland market for more than 15 http://www.eaton-williams.co.uk/colmanmoducel/colman_products/ years, and we have extensive experience in selecting and sizing their products. For more information contact us or go to www.h-v-c.com.

Product Focus MD Circular Diffuser Product Focus CD Linear Slot Diffuser HVC’s MD Series diffusers are amongst the very few diffusers to be backed by comprehensive Colman Moducel’s model CD is a high capacity independent laboratory tests, and are specifically designed to ensure: linear slot diffuser with a curved blade profile x Even distribution of air - gives extremely horizontal throw and creates no draughts specifically designed for applications that require when correctly sized and installed. high air volumes with short throws. This makes it x Quietness in operation - The shifting mechanism and cone bracings are particularly suited to VAV systems where it’s ability aerodynamically designed to keep vortex shedding points to a minimum, avoiding to turndown to 20% of maximum air volume whilst 'organ pipe' effect. still maintaining effective air distribution is crucial. Adjustment is by screw action, preventing distortion of ceilings sometimes encountered with 'pushpull' The CD diffuser combines excellent adjustment diffusers. All moving parts and dissimilar performance with a simple, cost effective metal where in contact are cadmium plated to prevent design to provide an economic solution to a wear and possible seizing up. variety of air distribution requirements. It is designed with no moving parts and is hence The inner cone unit is easily removable and replaceable tamper proof., and is available in single slot for maintenance and cleaning. Excellent stove enamelled for one way and double slot for two way paint finish of high durability, free from ripples or discharge. blemishes, helps to reduce resistance to air flow and gives a very easy-to-clean surface. Airforce Air Handling Units Thermal Technology Heat Recovery Units

Established in 1991, Airforce Ventilation Products is a successful manufacturer of a large and varied Thermal Technology was one of the first companies in the UK to manufacture an off-the –shelf range range of air movement and associated equipment. Their standard “BD” AHU product range covers air of compact heat recovery units for commercial applications. The Recupovent and Shallovent ranges flows from 0.5m3/s to over 20.0m3/s. On units outside of this range, or with special requirements, the are known throughout the industry as being well designed, quality products. combined experience and design expertise of Fairhaven and Airforce allows us to compete strongly in Produced in a range of sizes delivering up to 2.5m3/sec airflows, the Recupovent range is now in its the market for bespoke and specialised units. seventh generation of design, which has been developed to offer a wide range of available features, including:

x Horizontal or vertical configuration x Internal or weatherproof construction x High efficiency x Summer bypass system x Duplex (run and standby) fans on extract and/or supply x Integral LPHW or electric supplementary heaters x Fully automatic controls

As well as the usual internal component options of hot water, steam, gas and , DX and cooling and multiple filtration types, units can also be fitted with energy saving plate heat exchangers, thermal wheels and adiabatic cooling systems. If required, we can supply the units with built in controls, valve trains etc, and the range can be configured to comply with the latest CO4 and HTM03-1 standards for hospital applications.

Airforce take advantage of the latest advances in fan technology to ensure that the BD range is always current, efficient and cost effective. Backward curved centrifugal fans are used where possible, and direct drive “plug fans” are available as an option.

Airforce units have been installed in a wide range of environments, including offices, retail outlets, factories and hospitals. They also have a strong expertise in producing units for marine applications such as ships, coastal buildings and off-shore platforms.

For more information or to request a quotation or design, please contact us. Acoustica Noise Attenuation Products AIRIUS Destratification fans

Thermal destratification is the equalisation of the air temperature throughout a building or enclosed space. The significance of this is that this prevents warmer air in a room, factory or warehouse rising to the ceiling and cold air sinking to the most important area i.e. the floor. As As established specialists in the design and manufacture of noise control products, Acoustica offers a well as making the working environment more comfortable, effective de-stratification can yield range of 12 product groups for use in the building services sphere , including: between 20% - 40% reduction of heating bills.

M Series - A range of 60 standardised mounted circular spigotted attenuators. The range incorporates 50mm wall thickness and four standard lengths 300,600,900 & 1200mm long. Different wall thicknesses and lengths can be engineered on request to suit site conditions or special requirements.

C Series – The C series attenuator products are designed for mounting directly onto axial flow fans. There are 256 fully engineered standard variants from 250mm internal diameter to 1400mm. These units are usually supplied in either 1D or 2D (two times internal diameter) and with central pod fitted or straight through type. Airius destratification ceiling fans are the most efficient destratification products available. They are the only fan specifically designed for the purpose of moving warm air vertically

Rectangular – Rectangular duct mounted splitter silencers are available in downwards, as opposed to more conventional “fan-in-a-box” products. modular variable dimensions and are “mass customised” to suit the Each ceiling fan takes in the hot ceiling air and transports it to the floor in a non-turbulent, low- specific balance of airflow volume, resistance, self generated noise and velocity column of air. It is the unique design of the fan casing, which incorporates flow insertion loss required. straighteners and a venturi-effect nozzle, that makes the unit so effective.

The Airius method of thermal destratification, which is still relatively new to the UK, is more Acoustic Louvres – Louvres are used as a weather proof panel to allow air to pass into or from a cost effective than the alternative traditional oversized ceiling fans or re-engineering the . We have engineered a range of attenuating acoustic louvres that allow air to pass existing HVAC system. It is extremely energy efficient, reducing heating costs by up to 40%, through the aperture whilst reducing the noise transmission to the environment. These acoustic louvres can be mounted into apertures, can be used in standalone screening applications or can be thus helping you save on your energy bills. used to create ventilated enclosures. Through Fairhaven a full design and advice service as well as site As well as being more effective than other destratification products at equalising , installation is offered. AIRIUS fans are:

x Almost silent in operation – suitable for noise sensitive applications x Cheap to run - Low energy motors give minimal running costs x Simple and cost effective to install x Capable of yielding ROI of 12 ί 18 months NCA Manufacturing Fire & Control Dampers Vent-King Kitchen Canopies

A subsidiary brand of HVC, NCA is an established name in the field of air control and fire dampers, The Vent-King range of Units are a high- with a comprehensive range of products and options. quality range of commercial kitchen extract canopies, each one custom made in the UK to suit each application. When adequately sized, rated, and fitted as part of a correctly Series 100 fire dampers offer a high quality yet economical solution for fire designed extract system, Vent King units contain and remove the protection in ventilation systems. As well as being independently certified for an hot rising contaminated air from over the catering appliances, industry leading 6 hour integrity as standard, they have recently been tested to and filter any suspended grease and via grease eliminator baffles and filters located within a full length angled the latest BS1366-2 (ISO10294-1) for the maximum 4 hours at 300Pa by the plenum. Building Research Establishment. They are fitted with powerful stainless steel torsion springs as standard, meaning that the dampers can be mounted in any orientation and will Vent King units are designed and manufactured to comply with still close. Options include: the following standards: x Stainless steel blades and/or casings x H.V.C.A specification DW/172 x HEVAC compliant or plasterboard installation frames x The Food Safety Act x Microswitches for BMS blade position signal x The Health and Safety at Work Act x x In-duct & door mounted configurations UL 1046, UL300 x Electrical (solenoid or electromagnet) triggering options Vent King canopies include as standard:

Series 900 balancing and shut off dampers - Volume Control dampers are x Full perimeter condense channel with 25mm lip turned at 60 degrees for ease of cleaning needed to balance even the most carefully designed air distribution systems. It is x Stainless steel baffle type grease filters (UL/ULC listed) important, however, to select balancing dampers with low pressure drop x Removable grease collecting drawers within the apron of the filter housing (ensures filtered grease cannot fall onto cooking surface) characteristics to avoid excessive duct system pressure losses. NCA dampers x IP67 rated recessed light fittings to give 500 lux at the working surface (as per DW/172) incorporate an extremely low profile aerofoil blade to minimize pressure drop. x Mezz type flanges on all duct spigots They also have exceptionally low operating torque characteristics giving reduced loading on control x Welded hanging cleats for M10 drop rods motors and actuating devices. The operating linkages are entirely enclosed within the casing and outside the airstream and will require virtually no maintenance. Available with flanged casing or with Extract and Supply units spigoted casings for square, rectangular, round or flat oval duct connection Supply Plenum In order for any kitchen extract system Extract Plenum to function correctly, it is essential that Series 600 Fire Smoke Dampers - To be truly effective a fire smoke must maintain a fresh make up air is supplied to replace Grease baffles sufficiently low leakage rate for the entire period of integrity. With the absence of UK fire smoke the air being extracted. standards however, manufacturers are able to self define what a fire smoke damper is, hence Vent King ES units are designed to choosing a product that will perform as required can be extremely difficult. provide all or part of this supply air via NCA fire smoke dampers have been fully tested for leakage at elevated temperatures, and the canopy itself. This is achieved via a second within the unit which is connected to consistently outperform typical fire smoke dampers equipped with jamb seals only. They have also the supply air duct. From this plenum, the air can be either supplied to the inside of the canopy (induction mode), or to the room space outside the canopy. The standard Vent King configuration is been cycled 5000 times to ensure reliable closure, and come with the same 6 hour guarantee of to supply the fresh air to the room space via perforated diffusers on the front face of the canopy, integrity as Series 100 fire dampers. however induction mode or a combination of both are available as options. Heating & Cooling Coils

Fairhaven are agents for H&C Coils, manufacturers of a range of bespoke coils for ducted airstreams to suit heating and cooling applications. The primary fluids can be selected from steam, water, glycols or . We are able to offer a range of fin and casing materials to suit varying environmental conditions that may be encountered.

Hot Water Air Heating Coils for air heating can be used with L.P.H.W., M.P.H.W., H.P.H.W. or Low Grade Hot Water generated from other equipment.

Two tube and fin configurations are offered which enable coils to be manufactured in almost any size to suit Ducting, Plenums and Air Handling Units.

All coils are selected individually to suit customer requirement using technically advanced computer software to give optimum performance with lowest pressure drop.

JS Evaporative Coolers

Evaporative cooling is the ideal solution for reducing temperatures in large indoor areas. It provides significant cooling at a fraction of the price of traditional , typically 80% less. This makes cooling large commercial and industrial premises a viable option.

The JS range of evaporative coolers can be installed on the ground directly outside, on the roof or on the wall of a building. A single unit will provide up to 63,000 m3/h of chilled air, which is enough to cool an area of approximately 3,500m3. Multiple units are used to cool larger areas.

The system cools air by drawing it in through continually wetted 3 Glenavy Road Moira pads. The process of evaporation absorbs , cooling Craigavon the air. This chilled air is then pumped into and distributed Co. Armagh around the building via ductwork. The benefits of evaporative BT67 0LT cooling are:

x Low installation & running costs Tel: (028) 9261 1648 Fax: (028) 9261 1997 x Little maintenance required E-mail: [email protected] x Up to 10C of cooling from the outside ambient temperature x Also provides ventilation and humidification