GBR, YPbPr Analog Component to SDI ADC-3901

DESCRIPTION FEATURES

The ADC-3901 provides high quality analog component to conversion 10-bit high quality video conversion to SDI 270Mb/s with 12-bit processing for both 525 and 625 line standards and inputs for GBR and YPbPr Looping inputs: YPbPr, RGBS signal types. SMPTE, EBU, MII, standard levels This module, as is the case with all modules in the NEO family, can be controlled locally via a 525, 625 line rates front-edge display or by remote communications allowing for remote control, monitoring and Output signal type diagnostics using hardware control panels and/or a GUI. 12-bit video processing USER CONTROL VARIABLES EDH inserted at output Input Sync Select External, Y/G Command Control System (CCS) Enabled YpbPrGain Increase / Decrease DejaView intelligent settings recovery system Pb Gain Increase / Decrease Vertical Blanking Increase / Decrease Pr Gain Increase / Decrease Blanking up to line 19 in 525, up line 22 in 625 Y Offset Increase / Decrease Pedestal Removal On / Off Pb Offset Increase / Decrease Pr Offset Increase / Decrease Horizontal Phase Increase / Decrease OUT1 OUT2 SYNC IN IN IN Internal Color Bars Enabled / Disabled SDI SDI Cr/R Cb/B Y/G ADC-3901

SPECIFICATIONS Specifications and designs are subject to change without notice.

COMPONENT ANALOG VIDEO INPUT SERIAL VIDEO OUTPUT Level 0.7Vp-p nominal, 1.0Vp-p nominal with sync Number 2 Impedance Loop through Hi-Z or 75 Standards SMPTE 259M-C; 270Mb/s, 525/625 component External sync Loop through Connector BNC per IEC 169-8 Return Loss >40dB to 5.5MHz Impedance 75 Ohms Sampling Rate 27 MHz Y 13.5 MHz Cr/Cb Return Loss 18dB to clock frequency Over-sampling 2X Signal Level 800mV ±10% Filtering Per CCIR 601 Rise and Fall Time 400-700pS (20 to 80% amplitude) Time Adjust Range ±1.8 µs Overshoot <10% of amplitude (all outputs terminated) Standards SMPTE/EBU component and GBR, Betacam and MII, and NTSC GBR, 525-line and 62- line auto switching SNR all channels > 64 dB RMS. relative to 0.714 V, 10 kHz to 5.5 MHz Interchannel Crosstalk <-50 dB 2T K factor <0.5% Luminance Non-linearity <1% Gain Alignment <1%, typically better than 0.5% DC clamping Typically within 1 quantization level on field average Frequency Response Y channel ± 0.1 dB to 5.5 MHz Cr, Cb channels ± 0.2 dB to 2.75 MHz Adjustable Gain ± 10%

NEO GBR, YPbPr Analog Component Video to SDI ADC-3901

ORDERING INFORMATION For more information visit www.leitch.com

ADC-3901 Analog Component to Digital Component Video Converter See the CCS (Command Control System™) section of the catalog for detailed explanations of applications and remote control panels applicable to the NEO product line. Leitch's CCS offers applications such as Pilot™ that provide the tools you need to configure, control, monitor, diagnose, and provide secure access to the equipment on your network regardless of your network topology

NEO