T1/E1 to Bridge (NTU) OnSite Model 2701A/I

The Patton Model 2701A/I both terminates T1/E1 and Fractional T1/E1 services and provides the conversion of T1/E1 to 10/100BaseTX Ethernet.

Connect Legacy T1/E1 to Ethernet he OnSite™ Model 2701A/I The Model 2701A/I comes with an Simple conversion of E1 or Fractional E1 to T1/E1 to Ethernet Bridge is the auto-sensing full-duplex 10/100Base- bridged to Ethernet. No configuration Tideal solution for connecting any T Ethernet port, cross-over , and required. small to medium enterprise or remote internal power supply. The Model Supports 75Ω or 120Ω E1 Lines office to an IP/ network using a 2701A/I is equipped with an integrated Both BNC and RJ-48C connectors are pro- standard T1/E1 interface. T1/E1 CSU/DSU for connection to full vided so there is no requirement for exter- and fractional T1/E1 services. nal conversions such as a balun The Model 2701A/I terminates T1 & E1 services for all n x kbps to 2.048 Mbps AC or DC power options make Eliminate Routers installing the Model 2701 into your net- Bridge Ethernet across the WAN using rates for simple connection to a router. work infrastructure a snap. industry standard PPP/BCP Flexible clocking modes, AMI/HDB3 & 10/100 Ethernet with MDI-X AMI/B8ZS coding, V.52/V.54 diagnos- Visit www.patton.com to view our Built-In communication crossover switch tics and more make the 2701A/I on of huge selection of network connectivity eliminates the confusion of straight through the most versatile NTU’s available. products and more. or cross over Ethernet cables. Power it Anywhere Universal input AC (100-240V) and DC (-48V) power supply options Designed and Manufactured in the USA Top notch quality and reliability OnSite Model 2701A/I T1/E1 to Ethernet Bridge (NTU)

Specifications* T1/E1 Interface • Built-in MDI-X cross-over Management Interface Physical • 1 x 120-Ohm RJ48C (RJ45) switch • 1 x RS-232/EIA-561 (RJ45) Shipping connection over twisted pair • IEEE 802.1d transparent learn- • Dimensions: 16 x 11 x 5 in. • Telnet • 1 x 75-Ohm BNC connection ing bridge up to 1,024 (40 x 28 x 13 cm) over coax addresses • VT-100 CLI • Weight 6 lbs (2.7 kg) • Line Rate 1.544 Mbps (T1); LED • Web/HTTP Boxed 2.048Mbps (E1) Weight: 2.25 lbs (1.0 kg) • Power • SNMP • DSX-1 levels for connection to Unit • E1/T1 Link local T1/E1 device (PBX) Compliance • Dimensions: 7.3 x 6.6 x 1.62 • E1/T1 Frame • Line Coding AMI/B8ZS (T1); • FCC Part 15A in. (18.5 x 16.8 x 4.1 cm) AMI/HDB3( E1) • E1/T1 TD and RD • Weight 0.8 lbs (0.36 kg) • CE Mark • ESF coding and framing (T1) • Eth Link Power Ethernet Interface • Eth 100M Temperature External AC; 100–240 VAC or • 1 x 10/100 Auto-Sensing • Eth TX and RX 0 to 50°C (standard) DC (-48 VDC)

Patton Co. Patton-Inalp Networks AG Patton Hungary Zrt 7622 Rickenbacker Drive Meriedweg 7 Gábor Dénes utca 4., Infopark Building C Gaithersburg, Maryland 20879, USA CH-3172 Niederwangen, Switzerland Budapest H-1117, Hungary Phone +1 301 975 1000 Phone +41 (31) 985 25 25 Phone +36 1 439 4840 +1 301 869 9293 Fax +41 (31) 985 25 26 Fax +36 1 439 4844 E-mail [email protected] E-mail [email protected] E-mail [email protected] Web www.patton.com Web www.inalp.com Web www.patton.com 07M2701AI-DS2

Patton is a registered trademark, and is a trademark of Patton Electronics * Specifications subject to change without notice. Company in the United States and other countries.