Version 1.0 Published April 2020 Copyright©2020 ASRock INC. All rights reserved. Copyright Notice: No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Disclaimer: Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation. With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com AUSTRALIA ONLY Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specifications 2
1.3 Motherboard Layout 6
1.4 I/O Panel 9
Chapter 2 Installation 11
2.1 Installing the CPU 12
2.2 Installing the CPU Fan and Heatsink 15
2.3 Installing Memory Modules (DIMM) 16
2.4 Expansion Slots (PCI Express Slots) 18
2.5 Jumpers Setup 19
2.6 Onboard Headers and Connectors 20
Chapter 3 Software and Utilities Operation 24
3.1 Installing Drivers 24
3.2 ASRock Motherboard Utility (A-Tuning) 25
3.2.1 Installing ASRock Motherboard Utility (A-Tuning) 25
3.2.2 Using ASRock Motherboard Utility (A-Tuning) 25
3.3 ASRock Live Update & APP Shop 28
3.3.1 UI Overview 28
3.3.2 Apps 29
3.3.3 BIOS & Drivers 32
3.3.4 Setting 33 Chapter 4 UEFI SETUP UTILITY 34
4.1 Introduction 34
4.2 EZ Mode 35
4.3 Advanced Mode 36
4.3.1 UEFI Menu Bar 36
4.3.2 Navigation Keys 37
4.4 Main Screen 38
4.5 OC Tweaker Screen 40
4.6 Advanced Screen 48
4.6.1 CPU Configuration 49
4.6.2 Chipset Configuration 51
4.6.3 Storage Configuration 54
4.6.4 Super IO Configuration 55
4.6.5 ACPI Configuration 56
4.6.6 USB Configuration 57
4.6.7 Trusted Computing 58
4.7 Tools 59
4.8 Hardware Health Event Monitoring Screen 61
4.9 Security Screen 63
4.10 Boot Screen 64
4.11 Exit Screen 67 1.1 Package Contents setup. BIOS the of guide configuration the contains 4 Chapter utilities. and software the of guide operation the 3contains Chapter guides. installation step-by-step and motherboard the of introduction the 2contains 1and Chapter documentation, this In endurance. and quality to commitment ASRock’s to conforming design robust with performance excellent It delivers control. quality stringent consistently ASRock’s under produced motherboard a reliable H410M-HDVASRock / H410M-HVSmotherboard, you purchasing for Thank Chapter 1 Introduction • • • • • 1 x I/O Panel Shield Shield Panel 1 xI/O ATA (SATA) (Optional) 2 xSerial Cables Data H410M-HDV CD /H410M-HVSASRock Support Guide H410M-HDV Installation /H410M-HVSASRock Quick Factor) ATXForm (Micro H410M-HDV /H410M-HVSASRock Motherboard this motherboard, please visit our website for specific information about the model model the about information specific for website our visit please motherboard, this to related support technical require Ifyou notice. further without website ASRock’s on available be will version updated the occur, documentation this of modifications any Incase notice. without change to subject be will documentation this of content the updated, be might software BIOS the and specifications motherboard the Because website as well. ASRock website website ASRock well. as website ASRock’s on list support CPU and cards VGA latest the You find may using. are you http://www.asrock.com . H410M-HVS H410M-HDV 1
English (i5/i3), (i5/i3), TM Processors (Socket 1200) TM Gen Intel® Core th (i9/i7) support (i9/i7) up Core to 2933; DDR4 TM 1 x PCI Express Slot 3.0 x16 1 x PCI Express 3.0 x1 Slot Intel® UHD Graphics Built-in Visuals and the outputs VGA can be supported only with processors which are GPU integrated. Hardware Accelerated Codecs: AVC/H.264, HEVC/H.265 8bit,HEVC/H.265 10bit, VP8, VP9 8bit, VP9 10bit, MPEG 2, MJPEG, VC-1 Dual Channel Memory DDR4 Technology DIMM2 x DDR4 Slots Supports 2933/2800/2666/2400/2133 DDR4 non-ECC, un- buffered memory Supports ECC UDIMM memory modules (operate in non- ECC mode) Max. capacity of system memory: 64GB Supports Intel® Extreme Memory Profile (XMP) 2.0 15μ Gold Contact in DIMM Slots Micro ATX Form Factor Solid Capacitor design Supports 10 Digi design Power Phase5 Power design Supports Intel® Boost Turbo Max 3.0 Technology Intel® H410 • • • • • • • • • • • • • • • • • • * VP8 and VP9 encode are not supported by Windows OS. * Supports NVMe SSD as boot disks * VP9 are and 10bit for decode VC-1 only. * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) * Core Pentium® and Celeron® support up to 2666. DDR4
Graphics Expansion Expansion Slot Chipset Memory CPU Platform 1.2 Specifications 1.2 2
English LAN Audio H410M-HVS: simultaneously 2displays to up * Supports H410M-HDV: • • • • • • • • • • • • • • • • • • • • Supports Wake-On-LAN Supports RTL8111H 1 xRealtek 10/100/1000 Mb/s LAN Gigabit x1 PCIE Supports Surge Protection Surge Supports Codec) Audio ALC887 7.1 (Realtek Audio HD CH 1.4 Port HDMI with playback (UHD) HD Ultra 4K Supports 1.4 Port HDMI with 2.3 HDCP Supports required) is monitor HDMI (Compliant 1.4 Port HDMI Audio) with Rate Bit (High HBR (12bpc), Color xvYCCand Deep Sync, Lip Auto Supports 60Hz @ 1920x1200 to up resolution max. with D-Sub Supports @ 30Hz (4096x2160) x2K 4K to up resolution max. 1.4 with HDMI Supports controllers display independent by ports D-Sub and HDMI support output: graphics Dual 1.4 Port HDMI with playback (UHD) HD Ultra 4K Supports 1.4 Ports HDMI DVI-D and with 2.3 HDCP Supports required) is monitor HDMI (Compliant 1.4 Port HDMI Audio) with Rate Bit (High HBR (12bpc), Color xvYCCand Deep Sync, Lip Auto Supports 60Hz @ 1920x1200 to up resolution max. with D-Sub Supports 60Hz @ 1920x1200 to up resolution max. DVI-D with Supports @30Hz (4096x2160) x2K 4K to up resolution max. 1.4 with HDMI Supports HDMI and D-Sub, DVI-D options: output graphics Three Disc Blu-ray UHD/HDR Protection, Content SGX Intel® 3.0, PlayReady Microsoft Gamut), Color (Wide 2020 Rec. Security: &Content Display 2.1 OpenCL Graphics, Switchable / Hybrid Video, Sync Quick Intel® Visuals, In Built Intel® 4.5, OpenGL 12, DirectX Microsoft & Compute: Media Graphics, H410M-HVS H410M-HDV 3
English (Supports ESD Protection) 1 x Chassis/Water Pump Fan Connector (Smart (4-pin) Fan Speed Control) 1 x 24 pin Connector ATX Power Connector1 x 8 pin Power 12V Panel1 x Front Audio Connector 2.01 x USB Header (Supports 2.0 2 USB ports) (Supports ESD Protection) 3.21 x USB Gen1 Header (Supports 3.2 2 USB Gen1 ports) 1 x DVI-D Port1 x DVI-D 1 x HDMI Port 1 x D-Sub Port 1 x HDMI Port 6.0 Connectors,4 x SATA3 Gb/s support NCQ, AHCI and Hot Plug TPM1 x SPI Header 1 x Chassis Intrusion and Speaker Header 1 x CPU Fan Connector (4-pin) Supports Lightning/ESD Protection Supports Energy Efficient Ethernet 802.3az Supports PXE 1 x PS/2 Mouse/Keyboard Port 2.04 x USB Ports (Supports ESD Protection) 3.22 x USB Gen1 Ports (Supports ESD Protection) 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) HD Audio Jacks: Line in Speaker / Front / Microphone 1 x D-Sub Port • • • • • • • • • • • • • • • • • • • • • • • * The Fan CPU Connector supports the CPU fan of maximum fan power. 1A (12W) * The Chassis/Water PumpFan supports the water cooler fan of maximum 2A fan (24W) power. * CHA_FAN1/WP can auto detect if 3-pin or 4-pin fan is in use. H410M-HVS: H410M-HDV: Connector Storage Rear Panel I/O 4
English * For detailed product information, please visit our website: our visit please information, product detailed *For tions Certifica OS Monitor Hardware Feature BIOS
overclocking. by caused damage possible for responsible We not are expense. and risk own your at done be It should system. your of devices and components the to damage cause even or stability, system’s your affect may Overclocking tools. overclocking third-party using or Technology, Overclocking Untied applying BIOS, the in setting the adjusting including overclocking, with involved risk acertain is there that realize Please - • • • • • • • • • • • • • ErP/EuP ready (ErP/EuP ready power supply is required) is supply power ready (ErP/EuP ready ErP/EuP CE FCC, 64-bit 10 Windows® Microsoft® +1.0V +12V,Voltage monitoring: +5V, +3.3V, Vcore, CPU PCH detection OPEN CASE Fans Pump CPU, Chassis/Water Control: Multi-Speed Fan Fans Pump CPU,ture): Chassis/Water tempera CPU by speed fan chassis (Auto adjust Fan Quiet Fans Pump CPU, Chassis/Water Tachometer: Fan Fans Pump CPU, Chassis/Water Sensing: Temperature Multi-adjustment +1.0V, PCH GT, DRAM, Voltage Core/Cache, VCCST CPU Support 2.7 SMBIOS events up wake Compliant ACPI 6.0 support GUI multilingual with BIOS Legal UEFI AMI
http://www.asrock.com - H410M-HVS H410M-HDV 5
English 1.3 Motherboard Layout Motherboard 1.3 H410M-HDV: 6
English H410M-HVS: H410M-HVS H410M-HDV 7
English Chassis Intrusion and Speaker Header (SPK_CI1) System Panel Header (PANEL1) PanelFront Audio Header (HD_AUDIO1) USB 2.0USB Header (USB_5_6) ConnectorSATA3 (SATA3_0) ConnectorSATA3 (SATA3_1) ConnectorSATA3 (SATA3_2) ConnectorSATA3 (SATA3_3) TPMSPI Header (SPI_TPM_J1) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DIMM DDR4 Slots (DDR4_A1, DDR4_B1) ConnectorATX Power (ATXPWR1) 3.2USB Gen1 Header (USB3_3_4) Clear CMOS Jumper (CLRMOS1) Description Connector Power ATX 12V (ATX12V1) Chassis/Water Pump Fan Connector (CHA_FAN1/WP) 8 9 3 4 5 6 7 1 2 14 11 16 10 15 13 12 No. 8
English H410M-HDV: 1.4 I/O Panel H410M-HVS: No. No. 5 4 3 2 1 6 5 4 3 2 1 Front Speaker (Lime)** Front Speaker Blue)** (Light In Line Port* RJ-45 LAN (USB_12) Ports USB 2.0 Port D-Sub Description Microphone (Pink)** Microphone (Lime)** Front Speaker Blue)** (Light In Line Port* RJ-45 LAN (USB_12) Ports USB 2.0 Port D-Sub Description 11 1 1 10 10 9 2 9 2 No. No. 10 10 11 9 8 7 6 9 8 7 HDMI Port Port HDMI Port Mouse/Keyboard PS/2 (USB3_12) Ports Gen1 USB 3.2 (USB_34) Ports USB 2.0 (Pink)** Microphone Description DVI-D Port DVI-D Port Port HDMI Port Mouse/Keyboard PS/2 (USB3_12) Ports Gen1 USB 3.2 (USB_34) Ports USB 2.0 Description 8 8 3 3 7 7 5 4 6 6 5 4 H410M-HVS H410M-HDV 9
English Description 10Mbps connection 100Mbps connection connection1Gbps : Function Rear Speaker Out SpeakerFront Out Central /Subwoofer Speaker Out Side Speaker Out Speed LED Status Off Orange Green No LinkNo Data Activity Link Description SPEED LED Function of the Audio Ports in 7.1-channel Configuration LAN Port Port Light Blue (Rear panel) Lime (Rear panel) Pink (Rear panel) Lime panel) (Front Blinking On Activity / Link LED Status Off ACT/LINK LED ** ** * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. 10
English Chapter 2 Installation or change any motherboard settings. motherboard any change or components motherboard install you before precautions following the of note Take Pre-installation Precautions it. into fits motherboard the that ensure to chassis your of configuration the study motherboard, the install you Before motherboard. factor form Micro ATX is a This • • • • • tighten the screws! Doing so may damage the motherboard. the damage may so Doing screws! the tighten over- not do please chassis, the to motherboard the secure to screws placing When components. the with comes that bag the in or pad anti-static onagrounded them place components, any uninstall you Whenever ICs. the touch not do and edges the by components Hold components. the handle you before object grounded asafety touch or strap wrist a grounded to use remember Also on a carpet. directly motherboard your place NEVER components, motherboard’s the to electricity static from damage avoid to order In components. motherboard to damages and injuries physical cause may so do to Failure components. motherboard the removing or installing before cord power the unplug to sure Make H410M-HVS H410M-HDV 11
English
B in the PnP cap bent pins A is on the socket, if the CPU surface is unclean, or if there are any socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Before you insert the 1200-Pin CPU into the socket, please check if the Unplug all power cables before installing the CPU.
1. 2. 2 1 2.1 Installing the CPU the Installing 2.1 12
English 3 5 4 H410M-HVS H410M-HDV 13
English Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service. 14
English 2.2 Installing the CPU Fan and Heatsink 1 2
CPU_F
AN H410M-HVS H410M-HDV 15
English slot; otherwise, this motherboard and DIMM may be damaged. brand, speed, size and chip-type) DIMM DDR4 pairs. module installed. For dual channel configuration, you always need to install identical(the same isIt unable to activate Dual Channel Memory Technology with only one memory isIt not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. 1. 2. 3. and supports Dual Channel Memory Technology. 2.3 Installing Memory Modules (DIMM) Modules Memory Installing 2.3 This motherboardprovides two 288-pin (DoubleDDR4 Data DIMM4) Rate slots, 16
English 1 2 3 H410M-HVS H410M-HDV 17
English
Before installing an expansion card, pleasemake sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card andmake necessary hardware settings for the card beforeyou start the installation. PCIE1 (PCIe 3.0 is x1 slot) used PCI for Express x1 lane width cards. PCIE2 is (PCIe slot) used 3.0 x16 for PCI Express lane x16 width graphics cards. PCIe slots: 2.4 Expansion Slots (PCI Express Slots) Express (PCI Slots Expansion 2.4 There are2 PCI Express slots on the motherboard. 18
English “Open”. is jumper the pins, onthe placed is cap jumper no If “Short”. is jumper the pins, the on placed is cap jumper the When setup. are how jumpers shows illustration The 2.5 Jumpers Setup the clear-CMOS action. clear-CMOS the do you before shutdown it then and first, system the up boot must you BIOS, the updating finish just you when CMOS the clear to need you If CMOS. the clearing after cap jumper the remove to remember Please for3seconds. onCLRMOS1 pins the short to cap ajumper use then cord, power the unplug and computer the off turn please setup, default to parameters system the reset To and clear parameters. setup system and time, date, password, system as such information setup system includes CMOS in data The CMOS. in data the clear to you allows CLRMOS1 7,(see p.6, No. 7) (CLRMOS1) Jumper CMOS Clear “Clear Status” to clear the record of previous chassis intrusion status. intrusion chassis previous of record the clear to Status” “Clear option BIOS the adjust Please detected. be may open case the CMOS, the clear If you 2-pin Jumper Open: Default Open: CMOS Clear Short:
H410M-HVS H410M-HDV 19
English the
to this Please connect the chassis intrusion and chassis speaker header. the positive and negative pins before connecting the cables. Connect the power button, reset button and system status indicator on the chassis to this header according to the pin assignmentsNote below. # D # GN D D ESET R GN DUMMY D - GN SPEAKER PWRBTN GN DUMMY + V IGNAL PLED HDLED- DUMMY +5 S 1 HDLED+ PLED
1 The front panel design may differ by chassis. A front panel module mainly consists of power button, reset button, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assignments are matched correctly. Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data. PLED (System Power LED): Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the system S1/S3is in sleep state. The LED is off when the system is in S4 sleep state or powered(S5). off HDLED (Hard Drive Activity LED): PWRBTN (Power Button): Connect to the power button on the chassis front panel. may configure You the way to turn off your system using the power button. RESET (Reset Button): Connect to the reset button on the chassis front panel. Press the reset button to restart the computer if the computer freezes and fails to perform a normal restart. these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over No. 15) No. p.6, 7, Chassis Intrusion and Speaker Header SPK_CI1) (7-pin 14) No. p.6,(see 7, (see (see System Panel Header (9-pin PANEL1) 2.6 Onboard Headers and Connectors and Headers Onboard 2.6 20
English (see p.6, 7,(see p.6, No. 16) HD_AUDIO1)(9-pin Header Audio Front Panel 7,(see p.6, No. 6) (19-pin USB3_3_4) Header Gen1 USB 3.2 7,(see p.6, No. 8) USB_5_6) (9-pin Header USB 2.0 p. see (SATA3_3: 7, p.6, see No. 11) (SATA3_2: 7, p.6, see No. 10) (SATA3_1: p. see (SATA3_0: ATA3 Connectors Serial 6, 7,6, 7,6, No. 12) No. 9) 2. 1.
If you use an AC’97 audio panel, please install it to the front panel audio header by by header audio panel front the to it install please panel, audio AC’97 an use If you chassis the on wire panel the but Sensing, Jack supports Audio Definition High A. Connect Mic_IN (MIC) to MIC2_L. to (MIC) Mic_IN Connect A. below: steps the system. your install to manual chassis and manual our in instructions the follow Please correctly. function to HDA support must and adjust “Recording Volume”. “Recording adjust and panel Control Realtek Tab the in “FrontMic” the to go mic, front the ToE. activate panel. audio AC’97 the for them connect to You need only. don’t panel audio HD the for are OUT_RET and MIC_RET D. (GND). (GND)Ground to Ground Connect C. OUT2_L. to (LIN) Audio_L and OUT2_R to (RIN) Audio_R Connect B.
IntA_P IntA_P PRESENCE# IntA_P IntA_P OUT_RE MIC_RET IntA_P IntA_P A_SSRX+ A_SSTX+ A_SSRX- A_SSTX- GN A A V GN GN _D+ _D- bus SATA3_2 SATA3_0 D D D T 1 1 Dummy GN IntA_PB_D+ IntA_PB_D- IntA_PB_SSTX+ IntA_PB_SSTX- GN IntA_PB_SSRX+ IntA_PB_SSRX- V bus
D D MIC2_L MIC2_R OUT2_ J_SENS OUT2_ SATA3_3 SATA3_1 R L
E This header is for header This ports. two support can header Gen1 USB 3.2 This motherboard. this on header is one There ports. two support can header USB 2.0 This motherboard. this on header is one There rate. transfer Gb/s 6.0 data to up with devices storage forinternal cables data SATA support connectors SATA3 four These to the front audio panel. panel. audio front the to devices audio connecting
H410M-HVS H410M-HDV 21
English fan
- chassis
water cooler fan,
chassis please plug it along Pin 1 and Pin 5. *Warning: Please make sure that the power cable connected is the for CPU and not the graphics card. Do not plug the PCIe power cable to this connector. This motherboardpro vides a 24-pin ATX power use 20-pin a connector. To pleaseATX power supply, along plugit Pin and 1 Pin 13. This motherboard provides a 8-pin 12V ATX power use connector. a To 4-pin ATX power supply, This motherboardprovides one 4-Pin water cooling connector. If you plan to connect a 3-Pin please connect it to Pin 1-3. This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. L 1
24 13 N_SPEED_CONTRO FA N_SPEED N_SPEED_CONTROL L FA N_SPEED FA
D FA 12 1 GN CPU_ 8 5 4 12V D + 1 2 3 4 GE_CONTRO GN TA N_VOL FA
No. 2) No. 3) No. p.6, 7, p.6, 7, ATX 12V Power Power ATX 12V Connector (8-pin ATX12V1) 1) No. p.6,(see 7, (24-pin ATXPWR1) 5) No. p.6,(see 7, ATX Power ConnectorATX Power (see (see CPU Fan Connector (4-pin CPU_FAN1) (see Chassis/Water Pump Fan Connector (4-pin CHA_FAN1/WP) 22
English (see p.6, 7,(see p.6, No. 13) (13-pin SPI_TPM_J1) Header SPI TPM 1 SPI_DQ SPI_DQ +3.3 SPI_CS Dummy SPI_MIS V 3 2 CLK R 0 SMRST SPI_MOS GN O SPI_TPM_CS D RST# # T PM_PIRQ I # integrity. platform ensures and identities, digital protects security, network enhance helps also system ATPM data. and words, pass certificates, digital keys, store securely can which system, (TPM) Module Platform Trusted SPI supports connector This
- H410M-HVS H410M-HDV 23
English or follow the order from top to Install All properly. Menu Utilities TheUtilities Menu shows the application software that the motherboard supports. Click on a specific item thenfollow the installation wizard to install it. If the Main Menu does not appear automatically, locate and double click on the file “ASRSETUP.EXE” in the Support CD to display the menu. Menu Drivers The drivers compatible to your system will auto-detectedbe and listed on the support CD driver page. Please click bottom to install those required drivers. Therefore, the drivers you install can work The Support CD that comes with the motherboard contains necessary drivers and useful utilities that enhance the motherboard’s features. CD Support The Running beginTo using the support insert CD, the CD into your CD-ROM drive. The CD automatically displays the Main is enabled Menu if “AUTORUN” in your computer. Chapter 3 Software and Utilities Operation Operation Utilities and Software 3 Chapter Drivers Installing 3.1 24
English 3.2.2 Using ASRock Motherboard Utility (A-Tuning) (A-Tuning) “ icon “ the find will you installation, the Shop.After &APP Update (A-Tuning) Utility Motherboard ASRock 3.2.1 Installing ASRock Motherboard Utility (A-Tuning) utilities. improved and features new more interface, anew with suite software purpose multi (A-Tuning) ASRock’s is Utility Motherboard ASRock 3.2 ASRock Motherboard Utility (A-Tuning) Choose an operation mode for your computer. foryour mode operation an Choose Operation Mode FAN-Tastic Settings. and Info, Tuning System Mode, Operation menu: (A-Tuning)main Utility Motherboard ASRock in sections four are There (A-Tuning) Utility board ASRock Motherboard Utility (A-Tuning) Utility Motherboard ASRock main menu will pop up. pop will menu main “ on your desktop. Double-click the the Double-click desktop. “ onyour can be downloaded from ASRock Live Live ASRock from downloaded be can “ icon, “ icon, ASRock Motherboard Utility Utility Motherboard ASRock ASRock Mother ASRock - H410M-HVS H410M-HDV 25
English
to the next speed level when the assigned temperature is met. FAN-Tastic Tuning FAN-Tastic Configure up to five different fan speeds using the graph. The fans will automatically shift System Info System View information about the system. *TheSystem Browser tab may not appearfor certain models. 26
English be launched when you start up the Windows operating system. operating Windows the up start you when launched be (A-Tuning) to Utility Motherboard ASRock want you if Startup" Windows at run select (A-Tuning).to "Auto Click Utility Motherboard ASRock ASRock Configure Settings H410M-HVS H410M-HDV 27
English Hot News Category Panel Information Panel : The information panel in the center displays data about the on your desktop to access ASRock Live Update APP & Shop : The category panel contains several category tabs or buttons that : The hot news section displays the various latest news. Click on the image currently selected category and allows users to perform job-related tasks. NewsHot to visit the website of the selected news and know more. Category Panel when selected the information panel below displays the relative information. Information Panel utility. need*You to be connected to the Internet to download apps from the ASRock Live Update & APP Shop. Overview UI 3.3.1 easily install various apps and support utilities. With ASRock Live Update & APP Shop, you can optimize your system and keep your motherboard up to date simply with a few clicks. Double-click 3.3 ASRock Live Update & APP Shop APP & Update Live ASRock 3.3 The ASRock UpdateLive & APP Shop is an online storefor purchasing and downloading software applicationsfor yourYou ASRockcan quickly computer. and 28
English Click on the app icon to see more details about the selected app. selected the about details more see to icon app onthe Click 2 Step not. or it intalled already have you whether and app the of price the You check can listed. apps more see to down and up scroll Please right. onthe shown are apps various other The screen. the of side left the on appears app recommended most The install. to want you app the Find 1 Step Installing an App download. to foryou onscreen apps available the all see will you "Apps" selected, is the tab When 3.3.2 Apps - The green "Installed" icon means the app is installed on your computer. your on installed is app the means icon "Installed" green -The charge. of free is app the if "Free" or price the displays icon red -The
H410M-HVS H410M-HDV 29
English to start downloading. .
To uninstallTo it, simply click on the trash can icon *The trash icon notmay appearfor certain apps. Step 4 When installation completes, you can find the green "Installed" icon appears on the upper right corner. Step 3 If you want to install the app, click on the red icon 30
English Click on the yellow icon icon yellow onthe Click 2 Step details. more see to icon app onthe Click 1 Step icon. app installed the below appears "New of Version" mark the find will you app, foryour version new available an is there When installed. already have you apps the upgrade You only can Upgrading an App
to start upgrading. start to
H410M-HVS H410M-HDV 31
English to see more details.
Click Update to start the update process. Step 2 Click to select one or more items you want to update. Step 3 Please check the item information before update. Click on Step 1 When the "BIOS & Drivers" tab is selected, you will see a list of recommended or critical updates for the BIOS or drivers. Please update them all soon. 3.3.3 BIOS & Drivers & BIOS 3.3.3 Drivers or BIOS Installing 32
English on Windows startup. on Windows Shop &APP Update Live ASRock the run automatically to want you if determine and location, server the select language, the change can you page, "Setting" the In 3.3.4 Setting H410M-HVS H410M-HDV 33
English after SETUP UTILITY to configure your by pressing right SETUP UTILITY ETUP UTILITY Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are forreference purpose only, and they may not exactly match what you see on your screen. and then back on. This section explains how to use the UEFI system. may run You the UEFI S after you power on the otherwise,computer, (POST) Power-On-Self-Test the will continue with its test routines. If you wish to enter the UEFI restartPOST, the system by pressing
English screen to switch to "Advanced Mode" for more options. for more Mode" "Advanced to switch to screen the of corner right upper the at button Mode" "Advanced the click or
English For configuring boot settings and bootpriority Exit the current screen or the UEFI Setup Utility For overclocking configurations For advanced system configurations Useful tools Displays current hardware status For security settings For setting system time/date information Security Boot Exit Advanced Tool H/W Monitor Main OC Tweaker The top of the screen has a menu bar with thefollowing selections: To accessTo the EZ Mode, press
English Please check the following table for the descriptions of each navigation key. navigation each of descriptions forthe table following the check Please item. required your click to mouse the use You also can screen. sub the into get to
English , the Main screen will appear and SETUP UTILITY The availability and location of BIOS settings can be different for different models and BIOS versions. When you enter the UEFI H410M-HDV: 4.4 Main Screen Main 4.4 display the system overview. 38
English H410M-HVS:
My Favorite Display your collection of BIOS items. Press F5 to add/remove your favorite items. - - match what you see on your screen. Because the UEFI software is constantly being updated, the following UEFI setup screensand descriptions are for reference purpose only, and they may not exactly BCLK Aware Adaptive Voltage Adaptive Aware BCLK BCLK Aware Adaptive enable/disable. Voltage When enabled, pcode will be aware of the BCLK frequency when calculating the curves. CPU V/F This is idealfor BCLK OC to avoid high voltage overrides. loads. is a more stressful AVX workload that ratio lower the AVX to ensure maxi mum possible ratio for SSE workloads. Spectrum Spread BCLK Enable BCLK Spread Spectrum to reduce electromagnetic interference for passing EMI tests. Disable to achieve higher clock speeds when overclocking. AVX2 RatioAVX2 Offset specifies a negative offset from the CPU AVX work Ratio for CPU Configuration CPU Offset Ratio AVX2 4.5 OC Tweaker Screen Tweaker OC 4.5 In the OC Tweaker screen, you can set up overclocking features. 40
English and assign the appropriate frequency automatically. frequency appropriate the assign and module(s) inserted memory the detect will motherboard the [Auto]If selected, is DRAM Frequency specifications. standard beyond perform and memory the overclock to settings XMP Load Load XMP Setting DRAM Timing Configuration forDDR4 modules. (XMP) profile memory extreme (SPD) Intel and detect presence serial the browse to users Allows Memory Information DRAM Configuration feature. (TVB) Boost Velocity Thermal Intel the implment that for processors optimizations voltage based thermal controls service This Intel Thermal Velocity Boost Voltage Optimizations P-states. controlled forhardware allow to interface v2 CPPC the expose will Enabling support. Shift Technology Speed Intel Enable/Disable Intel Speed Shift Technology state. performance highest the requests system operating the when frequency operating base its above run to processor the enables Technology Turbo Boost Intel Intel Turbo Boost Technology dissipation. heat and saving power forbetter points voltage and cies frequen multiple between switch to processors allows technology SpeedStep Intel Intel SpeedStep Technology quency. fre same the at run can core and ring the so Offset Ratio Core to Ring Disable Ring to Core Ratio Offset Frequency. FCLK the Configure FCLK Frequency handoff. OS before set will BIOS the that state performance the Select Boot Performance Mode - - H410M-HVS H410M-HDV 41
English
rank. (tWTR_L) Delay Read to Write numberThe of clocks between the last valid write operation and the next read command to the same internal bank. RAS to RAS Delay (tRRD_L) (tRRD_L) Delay RAS to RAS Thenumber of clocks between two rows activated in different banks of the same rank. (tRRD_S) Delay RAS to RAS Thenumber of clocks between two rows activated in different banks of the same The amount of delay thatmust elapse after thecompletion a of valid write operation, before an active bank can be precharged. (tRFC) Time Cycle Refresh Thenumber of clocks from a Refresh command until the first Activate command to the same rank. Command Rate (CR) Rate Command Thenumber of clock cycles required between a bank active command and issuing the precharge command. The time between sendinga column address to the memory and the beginning of the data in response. (tRCDtRP) Precharge Row and Delay CAS# to RAS# The delay between when a memory chip is selected and when the first active command can be issued. Timing Secondary (tWR) Time Recovery Write command and opening the next row. (tRAS) Time Active RAS# RAS# to CAS# Delay : Thenumber of clock cycles required between the opening of a row of memory and accessing columns within it. Precharge:Row Thenumber of clock cycles required between the issuing of theprecharge Primary Timing Primary (tCL) Latency CAS# 42
English CAS Write Latency (tCWL) rank. same the allowed are activates four which in window time The Four Activate Window (tFAW) rank. same the to command charge rowto a pre- command read a between inserted are that clocks of number The Configure between module read to read delay. read to read module between Configure tRDRD_dg delay. read to read module between Configure tRDRD_sg Turn Around Timing mode. Self-Refresh enters it once internally command refresh of one minimum a initiates the DDR4 time of period the Configure tCKE interval. periodic an average at cycles refresh Configure tREFI Third Timing Latency. CAS Write Configure Read to Precharge (tRTP) bank. internal same the to command read next the and operation write valid last the between clocks of The number Write to Read Delay (tWTR_S) Configure between module read to write delay. write to read module between Configure tRDWR_dg delay. write to read module between Configure tRDWR_sg delay. read to read module between Configure tRDRD_dd delay. read to read module between Configure tRDRD_dr H410M-HVS H410M-HDV 43
English RTL Init Value Init RTL Configure round trip latency init valuefor round trip latency training. Value IO-LInit ConfigureIO latency init valueIO for latency training. Round Trip Timing Trip Round Optimization Timing Trip Round Auto is enabled in general case. Configure between module write to write delay. tWRWR_dr Configure between module write to write delay. tWRWR_dd Configure between module write to write delay. Configure between module write to read delay. tWRWR_sg Configure between module write to write delay. tWRWR_dg Configure between module write to read delay. tWRRD_dr Configure between module write to read delay. tWRRD_dd tRDWR_dd Configure between module read to write delay. tWRRD_sg Configure between module write to read delay. tWRRD_dg tRDWR_dr Configure between module read to write delay. 44
English ODT NOM (B1) is [Auto]. default The settings. (CH ODT A1) change Auto/Manual to this Use ODT WR (B1) A1. channel WR for resistors' termination die on memory the Configure ODT WR (A1) ODT Setting B. Channel for Delay RFR Configure RFR Delay (CH B) A. Channel for Delay RFR Configure RFR Delay (CH A) B. channel for offset latency IO Configure OffsetIO-L (CH B) A. channel for offset latency IO Configure OffsetIO-L (CH A) B. channel for latency IO Configure (CHIO-L B) A. channel for latency IO Configure (CHIO-L A) B. channel for latency trip round Configure RTL (CH B) A. channel for latency trip round Configure RTL (CH A) Configure the memory on die termination resistors' WR for channel B1. channel WR for resistors' termination die on memory the Configure Configure the memory on die termination resistors' PARK for channel A1. channel for PARK resistors' termination die on memory the Configure ODT PARK (A1) is [Auto]. default The settings. (CH ODT B1) change to Auto/Manual this Use ODT NOM (A1) H410M-HVS H410M-HDV 45
English [Enabled] The system will allow performing realtime memory timing changes after MRC_DONE. Tristate Command ASRock Timing Optimization Timing ASRock Configure the fast path through the MRC. Timing Memory Realtime Configure the realtime memory timings. PCH +1.0 Voltage +1.0 PCH Configure the chipset voltage. Voltage DRAM Use this to configureDRAM Voltage. The default [Auto]. value is GT Voltage GT Configure the voltagefor the integrated GPU. Voltage VCCST Configure the voltagefor VCCST. the MRC Fast Boot Fast MRC Enable Memory Fast Boot to skip DRAM memory training for booting faster. Configuration Voltage Voltage Core/Cache CPU Input voltage for the processor by the external voltage refulator. Exit On Failure On Exit Configure the Exit FailureOn for MRC training steps. Fail Training On Reset Reset system if the MRC training fails. Configure the CommandTristate Support. Advanced Setting Advanced ODT PARK (B1) PARK ODT Configure the memory on die termination resistors'PARK for channelB1. 46
English You can load previous saved profile from the disk. the from profile saved previous You load can Load User UEFI Setup Profile from Disk disk. to profile user an as settings UEFI current save to you It helps Save User UEFI Setup Profile to Disk defaults. user saved previously Load Load User Default default. user as settings your save to enter and press name Type aprofile Save User Default H410M-HVS H410M-HDV 47
English -
Setting wrong values in this section may cause the system to malfunction. Active Page on Entry on Page Active Select the default page when entering the UEFI setup utility. UEFI HD Full UEFI Setup Style Setup UEFI Select the default mode when entering the UEFI setup utility. tion, Configuration, ACPI USB Configuration Trusted and Computing. In this section, you may set the configurationsfor thefollowing items: CPU Configuration, Chipset Configuration, Storage Configuration, IOSuper Configura supports Full HD resolution. If the monitor does not support Full HD resolution, then the resolution will be set to x 768. 1024 When [Disable] is selected, the resolution will be set directly. to x 768 1024 When [Auto] isWhen selected, [Auto] the resolution will be set to 1920 x 1080 if the monitor UEFI Configuration UEFI 4.6 Advanced Screen Advanced 4.6 48
English Enable C7 deep sleep state for lower power consumption. power for lower state sleep deep C7 Enable CPU C7 State Support consumption. power forlower state sleep deep C6 Enable CPU C6 State Support consumption. power forlower state sleep deep C3 Enable CPU C3 State Support (C1E) State consumption. power forlower Halt Enhanced Enable Enhanced Halt State (C1E) saving. power forbetter enabled all C7 and C6 C3, keep to recommended It is saving. forpower Support CStates CPU Enable CPU C States Support package. processor each in enable to cores of number the Select Active Processor Cores improved. is software onthreaded performance overall the that so core, each on run to threads multiple allows Technology Threading Hyper Intel Intel Hyper Threading Technology 4.6.1 CPU Configuration H410M-HVS H410M-HDV 49
English IntelVirtualization Technology allows platform a to run multiple operating systems and applications in independent partitions, so that one computer system can function as multiple virtual systems. Software Guard Extensions (SGX) Extensions Guard Software Intel SGX is a set of new CPU instructions that can be used by applications to set aside private regions of code and data. Automatically prefetch data and code for the processor. Enable for better performance. Prefetch Line Cache Adjacent Automatically prefetch the subsequent cache line while retrieving the currently requested cache line. Enable for better performance. Intel Virtualization Technology Virtualization Intel Prefetcher Hardware CFG Lock CFG This item allows you to disable or enable the CFG Lock. C6DRAM Enable/Disable moving of DRAM contents to PRM memory when CPU is in C6 state. Package C State Support State C Package Enable PCIe, CPU, Memory, Graphics C State Support for power saving. 50
English PCIE1 Link Speed overclocking. for optimizing is mode Auto Speed. Link Slot DMI Configure DMI Link Speed Support. IO Virtualization Root Single Disables or Enables option this Devices, PCIe SR-IOV has capable system If SR-IOV Support performance. I/O and isolation, security, manageability, of levels additional providing and reliability, and compatibility application improving by hardware utilize better monitor machine virtual your helps I/O forDirected Technology Virtualization Intel® VT-d decoding). bit PCI 64 supports system the (only if Space Address 4G Above in decoded be to Devices capable 64bit disable or Enable Above 4G Decoding VGA. aprimary Select Primary Graphics Adapter 4.6.2 Chipset Configuration Select the link speed forPCIE1. speed link the Select
H410M-HVS H410M-HDV 51
English
Enable/disable front panel HD audio. Audio HD HDMI Onboard Enable audio for the onboard digital outputs. Onboard HD Audio HD Onboard Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and automatically disable it when a sound card is installed. Panel Front IGPU Multi-Monitor IGPU Selectdisable to disable the integrated graphics when an external graphics card is installed. Select enable to keep the integrated graphics enabled at all times. LAN Onboard Enable or disable the onboard network interface controller. This option enables/disables the supportASPM for all PCHDMI devices. Memory Share Configure the size of memory that is allocated to the integrated graphicsprocessor when the system boots up. This option enables/disables the supportASPM for all PCH PCIE devices. Support ASPM DMI This option enables/disables the control of on CPU ASPM side of DMIthe Link. Support ASPM DMI PCH PCI Express Native Control Native Express PCI Select Enable for enhanced PCI Express power saving in OS. Support ASPM PCIE This option enables/disables the supportASPM for all CPU downstream devices. Support ASPM PCIE PCH PCIE2 Link Speed Link PCIE2 Select the link speed for PCIE2. 52
English to boot up when the power recovers. power the when up boot to start will system the If On]selected, [Power is recovers. power the when off remain will power the selected, is If Off] [Power failure. power a after state power the Select Restore on AC/Power Loss shutdown. is computer the when saving power for mode sleep deep Configure Deep Sleep H410M-HVS H410M-HDV 53
English
S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. is It a monitoring system for computer hard disk drives to detect and report on various indicators of reliability. SATA Aggressive Link Power Management Power Link Aggressive SATA AggressiveSATA Link Management Power allows devices SATA to enter a low power state during periods of inactivity to is save It only power. supported by AHCI mode. S.M.A.R.T. Disk Hard SATA Controller(s) SATA Enable/disable controllers. the SATA 4.6.3 Storage Configuration Storage 4.6.3 54
English Enable the PS2 Y-Cable or set this option to Auto. to option this Y-Cable set or PS2 the Enable PS2 Y-Cable 4.6.4 Super IO Configuration H410M-HVS H410M-HDV 55
English RTC Alarm Power On Power Alarm RTC Allow the system to be waked up by the real time clock alarm. Set it to By OS to let it be handled by your operating system. On Power Keyboard/Remote USB PS/2 Keyboard S4/S5 Wakeup Support Wakeup S4/S5 Keyboard PS/2 Allow the system to be waked up by a PS/2 Keyboard in S4/S5. On Power Devices PCIE Allow the system to be waked up by a PCIE device and enable wake on LAN. Select disable suspend for ACPI type is It recommended S1. to select auto for ACPI S3 power saving. USB Mouse Power On Power Mouse USB Allow the system to be waked up by an mouse. USB Allow the system to be waked up by an keyboard USB or remote controller. Suspend to RAM to Suspend 4.6.5 ACPI Configuration ACPI 4.6.5 56
English ownership change should be claimed by XHCI driver. XHCI by claimed be should change ownership XHCI The support. hand-off XHCI without OSes for workaround is a This XHCI Hand-off only. systems operating Windows/Linux and setup UEFI the under USB devices support to Only Setup UEFI Select USB support. legacy disable to recommended is it issues compatibility USB encounter you If devices. forUSB 2.0 Support OS Legacy disable or Enable Legacy USB Support 4.6.6 USB Configuration H410M-HVS H410M-HDV 57
English Security Device Support Device Security Enable or disable BIOS support for security device. 4.6.7 Trusted Computing Trusted 4.6.7 58
English UEFI. UEFI. your update to Flash Instant run and device storage USB your in files UEFI Save Instant Flash function. Erase Secure supports that listed SSD's the All SSD Secure Erase Tool Service. UEFI Tech using before configuration network setup Please PC. your with trouble having are you if Tech Service ASRock Contact UEFI Tech Service 4.7 Tools USB your in plug to recommended is it purpose, recovery and *For backup BIOS Flash. Internet using before configuration network setup Please for you. servers our from version firmware UEFI latest the updates and downloads Flash Internet ASRock Internet Flash - DHCP (Auto IP), Auto
pen drive before using this function. this using before drive pen
H410M-HVS H410M-HDV 59
English Select a server to download the UEFI firmware. Enable or disable sound effects in the setup utility. Server Download UEFI Use this to configure internet connection settingsfor Internet Flash. Internet Setting Internet Network Configuration Network 60
English Select CHA_FAN1 / W_Pump mode. mode. / W_Pump CHA_FAN1 Select CHA_FAN1 / W_Pump Switch Down. Step Fan CPU of value the Set CPU Fan 1 Step Down Up. Step Fan CPU of value the Set CPU Fan 1 Step Up temperature. foreach speed fan arespective assign and temperatures 5CPU set to Customize 1, choose or Fan forCPU mode afan Select CPU Fan 1 Setting temperature. foreach speed fan arespective assign and temperatures 5CPU set to Customize choose or Fan, forCPU mode afan Select Fan-Tastic Tuning Cycle. Duty Min Fan Measure Fan Tuning speed and voltage. and speed fan temperature, motherboard temperature, CPU the of parameters the including system, your on hardware the of status the monitor to you allows section This 4.8 Hardware Health Event Monitoring Screen H410M-HVS H410M-HDV 61
English Case Open Feature Open Case Enable or disable Case Open Feature to detect whether the chassis cover has been removed. Set the value of Chassis Fan 1 Step Up. Down Step 1 Fan Chassis Set the value of Chassis Fan 1 Step Down. Chassis Fan 1 Step Up Step 1 Fan Chassis Chassis Fan 1 Setting 1 Fan Chassis Select a fan mode CHA_FAN1, for or choose Customize to set 5 CPU temperatures and assign a respective fan speed for each temperature. Source Temp 1 Fan Chassis Select a fan temperature source for Chassis Fan 1. Chassis Fan 1 Control Mode Control 1 Fan Chassis Select PWM mode or DC mode for CHA_FAN1. 62
English Enable/disable Intel PTT in ME. Disable this option to use discrete TPM Module. TPM discrete use to option this Disable ME. in PTT Intel Enable/disable Intel(R) Platform Trust Technology Boot. forSecure support disable or enable to item this Use Secure Boot password. the remove to enter press and blank it Leave Utility. Setup UEFI the in settings the change to unable are Users account. user forthe password the change or Set User Password password. the remove to enter press and blank it Leave Utility. Setup UEFI the in settings the change to authority has administrator the Only account. administrator forthe password the change or Set Supervisor Password password. user the clear You also may system. forthe password supervisor/user the change or set may you section this In 4.9 Security Screen H410M-HVS H410M-HDV 63
English Boot Beep Boot Select whether the Boot Beep should be turned on or off when the system bootsPlease up. note that a buzzer is needed. Allow the system to be waked up by the onboard LAN. Timeout Prompt Setup Configure numberthe of seconds to waitfor the setup hot key. Num-Lock Bootup Select whether Num Lock should be turned on or off when the system boots up. from an storage USB device. The mustVBIOS support UEFI GOP if you are using an external graphics card. Please notice that Ultra Fast mode will boot so fast that the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows. LAN Onboard From Boot Fast Boot Boot Fast Fast Bootminimizes your computer's boot time. In fast mode you may not boot 4.10 Boot Screen Boot 4.10 This section displays the available devices on your systemfor you to configure the boot settings and the boot priority. 64
English execute both legacy and UEFI option ROM. option UEFI and legacy both execute not to launch not Do ROM only. Select option legacy support that those run to only Legacy ROM only. Select option UEFI support that those run to only UEFI Select Launch PXE OpROM Policy test. aWHCK you’re running unless disable not do Please Module. Support Compatibility the launch to Enable CSM CSM (Compatibility Support Module) settings. default the restores automatically system the times of foranumber boot to fails computer the If Boot Failure Guard Message speed. boot forfaster Disable Logo. Screen Full you've enabled ROM if AddOn the configure or ROM messages AddOn the see to ROM Display AddOn Enable AddOn ROM Display messages. POST normal show to disable or logo boot the display to Enable Full Screen Logo H410M-HVS H410M-HDV 65
English execute both legacy and UEFI option ROM. Priority ROM Device PCI Other For PCI devices other than Network. Mass storage or Video defines which OpROM to launch. Select UEFI only to run those that support UEFI option Select only. ROM Legacy only to run those that support legacy option Select only. ROM Do not launch to not Launch Storage OpROM Policy OpROM Storage Launch 66
English setup?” will pop out. Select [OK] to exit the UEFI SETUP U SETUP UEFI the [OK] exit to Select out. pop will setup?” exit and changes “Discard message, following the option this select you When Discard Changes and Exit U SETUP UEFI the exit and [OK] changes save to Select out. pop will setup?” exit and changes configuration “Save message, following the option this select you When Save Changes and Exit 4.11 Exit Screen When you select this option the following message, “Discard changes?” will pop pop will changes?” “Discard message, following the option this select you When Discard Changes changes. any Copy shellx64.efi to the root directory to launch EFI Shell. EFI launch to directory root the to shellx64.efi Copy Launch EFI Shell from filesystem device operation. this for used be can key F9 The options. forall values default UEFI Load Load UEFI Defaults changes. all [OK] discard to Select out. TILITY . TILITY TILITY without saving saving without H410M-HVS H410M-HDV 67
English Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp
ASRock Incorporation 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)
ASRock EUROPE B.V. Bijsterhuizen 11-11
6546 AR Nijmegen
The Netherlands
Phone: +31-24-345-44-33
Fax: +31-24-345-44-38
ASRock America, Inc. 13848 Magnolia Ave, Chino, CA91710
U.S.A.
Phone: +1-909-590-8308
Fax: +1-909-590-1026
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a)
Responsible Party Name: ASRock Incorporation
Address: 13848 Magnolia Ave, Chino, CA91710
Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product
Product Name : Motherboard
Model Number : H410M-HDV / H410M-HVS
Conforms to the following speci cations:
FCC Part 15, Subpart B, Unintentional Radiators
Supplementary Information:
is device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) is device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Representative Person’s Name: James
Signature :
Date : May 12, 2017
EU Declaration of Conformity
For the following equipment: Motherboard (Product Name) H410M-HDV / H410M-HVS / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address)
(EMC —Directive 2014/30/EU (from April 20th, 2016 ڛ EN 55024:2010/A1:2015 ڛ EN 55022:2010/AC:2011 Class B ☐ EN 61000-3-3:2013 ڛ EN 55032:2012+AC:2013 Class B ڛ EN 61000-3-2:2014 ڛ
☐ LVD —Directive 2014/35/EU (from April 20th, 2016) ☐ EN 60950-1 : 2011+ A2: 2013 ☐ EN 60950-1 : 2006/A12: 2011
RoHS — Directive 2011/65/EU ڛ CE marking ڛ
(EU conformity marking)
ASRock EUROPE B.V. (Company Name) Bijsterhuizen 1111 6546 AR Nijmegen The Netherlands (Company Address) Person responsible for making this declaration:
(Name, Surname) A.V.P (Position / Title) May 11, 2020 (Date) P/N: 15G062214000AK V1.0