MANDATORY DISCLOSURE Updated on 07 April 2021 I

MANDATORY DISCLOSURE Updated on 07 April 2021 I. AICTE File No. : 06/06/KER/ENGG/2002/67 Date & Period of last approval : July 07, 2020 II. Name of the institution : Sahrdaya College Of Engineering And Technology Address of the institution : Sahrdaya College of Engineering & Technology, PB No. 17, Kodakara, Thrissur - 680684 City & Pin Code : Kodakara 680 684 State : Kerala Phone : 0480 – 2726630 (12 Lines) Fax: 0480-2726634 E-mail : [email protected] Website : www.sahrdaya.ac.in Longitude & Latitude : 76.3056 & 10.3719 Office Hours : 8:45 AM to 4:30 PM Academic Hours : 8:45 AM to 3:45 PM Nearest Rly Station : Irinjalakuda – 5 kilometers Nearest Airport : Nedumbassery – Cochin Airpot – 25 km III. Type of institution : Private self- financing Category (1) of Institution : Religious Minority – Catholic Institute : CO- ED INSTITUTE IV. Name of the trust : Irinjalakuda Diocesan Educational Trust–(IDET) Type of organization : Trust Address of the organization : Catholic Bishops House, Irinjalakuda, Manavalassery Village, Mukundapuram Taluk, Thrissur, Kerala - 680 121 Registerd with : Registration Department Of Kerala Registration date : 23/07/2001 Website : www.irinjalakudadiocese.com V. Name of affiliating : APJ Abdul Kalam Technological university University Address : APJ Abdul Kalam Technological University, CET Campus, Thiruvananthapuram, Kerala - 695016 Website : www.ktu.edu.in Latest Affiliation period : 2020-2021 VI. Name of Director : Dr. Elizabeth Elias W/O Tholath Zacharia Varghese, Anugraha, 12th Mile, Chathamangalam,

Page 1 of 41

NIT Campus, P.O.Kozhikode- 673601 Phone : 9447949205 E-mail : [email protected] Designation : DIRECTOR Highest degree : PhD Name of Principal : Dr. Nixon Kuruvila Kolapran House Kodakara, 680684 Phone : 9446229344 E-mail : [email protected] Designation : Principal Highest degree : PhD VII. Board of Trustees : Name of the Trustee Designation Profession Academic Qualification His Excellency Bishop Mar Pauly Chairman Bishop, MA, Ph.D Educationist Kanookkadan Msgr Prof Dr Lazar Manager & Kuttikadan Priest, Ph.D President Educationist V Rev Fr Dr Antu Vice President Priest, Ph.D. Alappadan Educationist Rev Fr George Pareman Executive Director, Priest, MSC PSY SCET Executive Director, Scet Rev Fr Varghese Aricatt Finance Officer, Priest, Ph.D. IDET Educationist Rev. Dr Jojo Secretary, IDET Priest, Ph.D. Thoduparam Educationist bil Priest, Rev. Dr Davis Educationist Ph.D. Executive Director, Chenginiyadan SCAS Rev. Fr. Jinto Verampilavil Finance Officer, Priest, MBA SCET Educationist Fr Shaju Chirayath Finance Officer, Priest, MPHIL SCAS Educationist Rev. Fr. Noujin Vithayathil Executive Director, Priest, ---- Sahrdaya Tech Educationist Rev. Dr Jino Executive Director, Priest, Ph.D B.Th., Educationist M.B.A. Malakkaran SIMS

Page 2 of 41

Frequency of Meeting : 3rd of every month VIII. Board of Governors:

Sl. Phone No. Name Category Position Number

1 His Excellency Mar. Chairman, IDET President 0480 282 6820 Pauly Kannookadan

2 Msgr. Prof. Dr. Lazar Manager, SCET Member 9447194570 Kuttikadan

3 Rev. Fr. Varghese Treasurer, IDET Member 9447524818 Aricatt

Executive Director, 9447529572 4 Rev. Fr. George SCET Member Pareman

5 Rev. Fr. Jinto Finance officer, SCET Member 9496044874 Verampilavil

6 Dr. Elizabeth Elias Director, SCET Member 9447949205 7 Dr. M. S. Jayadeva Educationist Member 9845756554 8 Dr. Mini Shaji Director, NIT, Trichy Member 0431 250 3001 Thomas

9 Dr. Kuncheria P Educationist Member 7012465923 Issac

10 Dr. Merina Benny Industrialist (GM, Arjuna Member 9447488683 Natural Extracts, Aluva)

11 Er. Christo George Industrialist (MD, Hykon, Member 9846032117 Thrissur)

12 Dr. Sudha Geoge Professor, SCET Member 9495420548 Valavi

13 Dr. K. R. Joy Professor, SCET Member 8281918668 14 Mr. Dinesh P Vice President & Branch Member 9895399771 Thampi Head, TCS

15 Ms. Meena Thomas Director & COO, Agappe Member 9388754202 Diagnostics Ltd.

16 Nominees from State (Yet to be nominated by Member ---- Government State Govt.)

17 Dr. N Sajikumar KTU Nominee Member 9447828911

Page 3 of 41

18 Dr. Nixon Kuruvila Principal, SCET Secretary 9446229344

Frequency Of Meeting & : Once in 6 months, 09 Dec 2020 Date Of Last Meeting IX. Academic council :

Sl. No. Name Details Phone 1. His Excellency Mar Pauly Chairman, IDET 0480- Kannookadan 2826820 2. Msgr. Prof. Dr. Lazar Manager, SCET 8547086632 Kuttikadan 3. Rev. Fr. George Pareman Executive Director, SCET 9447529572 4. Rev. Fr. Jinto Finance officer, SCET 8289847600 Verampilavil 5. Dr. E Gopinathan Director,NITC(Rtd) 9447456272 6. Principal, Acharya 9845663639 Dr.H.D.Maheshappa IT,Bangalore 7. Dr. Paul K Joseph Professor, NITC 0495- 2286303 8. Dr. Lillykutty Professor, NITC 9446732986 9. Director SJCET, Mysore 9447949205 Dr. M.S. Jayadeva (Rtd) 10. Prof. K.T. Joseph Professor, GECT (Rtd) 9447225599 11. Dr.Elizabeth Elias Director, SCET 9845756554 12. Dr. Sudha George Valavi Professor,SCET 9495420548 13. Dr. Nixon Kuruvila Principal, SCET 9446229344 14. Prof. P C Thomas Founder Chairman PC Thomas Classes 15. Padmasree Prof. Professor, IISc Banglore E.D.Jemmis 16. Mr. Suresh Kumar Group Manager, Human Kottarath Resources, IBS 17. Mr. George Oommen Manager- People & Culture, SOTI 18. Dr Vineeth Kumar Paleri Professor, Dept of CSE, NITC 19. Dr. Katta Professor, Dept of CE, Venkataramana NIT Surathkal

Frequency of Meeting & : Once in a year, 09 Dec 2020 Date of Last Meeting

Page 4 of 41

X. Organisational chart :

XI. Student feedback on institutional governs/ faculty performance

At the end of every semester, an online faculty performance appraisal is conducted by the students. This is taken into account while reviewing the performance of the faculties during the academic year. XII. Grievance redressal mechanism for faculty, staff and students.

➢ Staff: • Monthly meeting with staff & Faculty: Monthly meeting with Staff and faculty are conducted. The progress of the Institution and the future developments are discussed, and decisions taken for the improvement of the Institution. • Staff Council: The Staff council meets every month and review the welfare of the members and suggestions placed to the Management for improvement. • Staff Picnic: Every year, one day picnic is arranged by the staff members visiting nearby places. The Management also contributes for the same. ➢ Students: • Meeting with students representatives: Monthly meeting is arranged with the Students representatives and their grievances Suggestions are recorded and action initiated for the improvement.

• Peer Group: Peer Group aims instilling the qualities of co- operation, tolerance, accommodation, team spirit, rational

Page 5 of 41

conscience and scale of values and competition, in the students. A staff animator will assist a group of 10 in group activities. Group discussions are held every week as part of study group activities.

• Technical Associations: We have provided opportunities to exhibit and develop the technical skills of students by the formation of Technical Associations. All the students of Sahrdaya will come under any one of the students Technical Associations, which is guided by an experienced Faculty member. Student’s activities and competitions have been arranged on the basis of Technical Associations. Every Association has an Association Secretary and a Joint secretary and other office bearers, with all respect of equal consideration for both genders. The Technical Association formed for each branch is detailed below:

❖ EMAGE: Technical Association for Of Electronics and Communication Engg Students. ❖ ACESS: Technical Association for the Computer Science & Engineering. Students ❖ EBSA: Technical Association for Biomedical Engineering students ❖ BEATS: Technical Association for Biotechnology Engineering students. ❖ PACE: Technical Association for Civil Engineering students. ❖ AESON: Technical Association for Electrical & Electronics Engineering students • Students Council: A Students Council has also been formed for the College, wherein the Students from different semesters occupy the office of the council, such as Chair person, Vice Chair person, General Secretary, Sports Secretary, Arts Secretary and Student Editor. Students Council is in charge of conducting Arts and Sports activities, celebrations of various functions, College day, College magazine, etc. • Coaching Classes: Regular Coaching classes are being conducted for the students attending Competitive exams like GATE, CIVIL SERVICE XIII. NAME OF THE DEPARTMENT 1. Department Of Biomedical Engineering: Course : B.Tech in Biomedical Engineering Level : UG 1st Year of approval by AICTE : 2002

Page 6 of 41

Batch 2014-18 2015-19 2016-20 Year wise Sanctioned Intake 60 60 60 Actual Admn 61 61 63 Qualifying Mark As per the directions of the State Government & University. No of Students passed (%) 51.67 79.31 68.97 Students Placed 48 42 32 Average Pay package 2.7 6 3 5 Students Opted 10 6 5 for Higher Studies

Accreditation Status of Course : Accredited by NAAC & The Institution Of Engineers (INDIA) Doctoral Courses : No Foreign Collaboration : Not Applied Professional Society Membership

Our faculty members and students are encouraged to take membership in professional associations. They are the members of the following associations:

1. IEEE(Institution of Electrical and Electronics Engineers) 2. ISTE (Indian Society for Technical Association) 3. M I E ( Member Institution of Engineers India) 4. B M E S I ( Biomedical Engineers Society of India) Professional Activities Faculty: • Faculty Orientation Programmes: Teaching through learning and then learning through teaching is part of the continuous enrichment process for any teacher. It is with this noble aim that the Management is arranging Faculty Orientation programme twice in a year. Eminent personalities from outside are invited and the programme includes various teaching methods, etc. to suit the developing technologies. • Training programme for Supporting / Housekeeping & Maintenance staff: The HRD Department of our Institution will conduct training programme for all the Supporting, House keeping and maintenance staff twice in a year, to mould them to suit the requirements of the Institution and its developments. • Technical meet of Faculty: Technical meet of the faculty is conducted monthly with paper presentation and discussion.

Page 7 of 41

• Daily Work Report of Faculty: All the staff members have to submit their detailed daily work report to the Head of the Institution through their Head of the Department Students: • Hand Book on Teaching Plan & Work plan: We have the practice of providing Teaching Plan and Work Plan to every student at the beginning of each semester. This handbook provides the information about the topics that will be taught in each class, and details of books to be referred for each topic etc., So that students can come prepared for attending each class. • Question Bank: Question Bank in each subject containing the previous University Questions and all the possible questions in the subject will be provided in a book form to everyone, at the beginning of semester. • Tutorials: Tutorial Classes are conducted in every subject, most effectively by dividing the class into two. This helps the students to develop skills on solving analytical questions • Project Works: Students are insisted to do one project in every semester in addition to the Curriculum insisted one. Project allowance is given to the students for the same, and best project will be awarded. Thus, every student before completing their Course will be doing minimum 7 Projects in the area of their specialization. We are also providing a financial assistance of Rs. 500/- (Rupees Five hundred) for each project • Outside Projects: Our students are permitted to do outside p r o j e c t s in connection with their specialization. • Outside Competitions: We are promoting our students to participate outside competitions in sports, arts, technical, quiz, etc. and they have bagged so many prize • Technical Seminars: All the students have to take up seminar in every semester during their course. Compulsory time is allotted in the timetable for each class. • Remedial Classes: Remedial Classes in selected subjects are being conducted for the weak students Consultancy Activities: • Placement facilities: A full time Placement Officer is appointed to co-ordinate and monitors the placement functions. The pivotal goal of his cell is to facilitate a healthy relation between the Institute and the relevant Industries, thereby ensuring placement for the maximum number of students. In addition, this cell maintains a database of various prospective employers that will help the students gain the much vital industrial exposure. Resume of all the final year students would be uploaded in the college website to ease the short listing of suitable students by various industries. • The Entrepreneurship Development Club: An Entrepreneurship Development Club has also been formed for the benefit of students. The aim of this club is to develop entrepreneurship skills of young engineers and make them job providers instead of job seekers.

Page 8 of 41

• NSS Cell: National Service Scheme has also been formed for developing National Integrity and Service Mentality among students and also to the Society

Departmental Achievements: ✓ Idea Grant of Rs. 85,000/- sanctioned for “Smart Surgical Assist Project” from Kerala start-up Mission as Idea Grant in the month of November 2018, which is guided by Mr. Jibin Jose Asst. Prof. of BM Dept. ✓ Mr. Jibin Jose Asst. Prof. of BM has got sanction for a for Kerala Start- up mission, for the development of “Hastha Prosthetic Arm”, in the month of November 2018. ✓ A discussion was held between the faculty members of BM depar-tment and Mr. John, Orthopaedic surgeon and Head of Orthopaedic Society of India and Dr. Varghese, Orthopaedic surgeon of Pushpagiri Medical College on 5 July 2018 for a joint research collaboration ✓ Mr. Melvin Konikkara and Sanal (2009 Batch) interacted with the final year and pre final year students on 14 July 2018 and shared their experience as a Biomedical Engineer in hospital. They also motivated the students to take sufficient training in hospitals and work abroad in gulf countries for some time to get a good exposure and career. ✓ Future XL Short Term Training program in “Block Chain” and its applications in health care was conducted on 26 and 27 of July in Accenture Lab ✓ On 31 July 2018, Mr. Tijohn Varghese and Mr. Finu John (2013 Batch) interacted with the final year and pre final year students and shared their experiences. ✓ A One day workshop on Robotics was conducted by BM department for the final year students on 6 August 2018 in Accenture lab ✓ The inauguration of BMESI Sahrdaya chapter & technical activities of EBSA (Engineering Biomedical students associa-tion) for the academic year 2018-19 was conducted on 8August 2018 in multipurpose indoor stadium at 10:00 am. Dr. Suresh K.S. from C - DIT Trivandrum delivered the keynote address. An interactive session on “Healthcare Technology Management - the National Initiatives” was arranged for BM S3, S5 & S7 students. ✓ Department of Biomedical Engineering conducted a workshop on “Mechanical Engineering in Minimally Invasive Surgical Tools” for S5 and S7 students. The session was conducted by Mr. PrakashanKaniyamparambil, CEO, Mini Surgical Equipments, who is a renowned dealer and manufacturer of minimally surgical equipments in south India. ✓ Mr.Vipin Varghese (2009 Batch) interacted with the final year and pre final year students on 14 September 2018 and shared his experience as a Biomedical Engineer in hospital. He also took a session on the job opportunities in Middle East. ✓ Biomedical Engineering association, EBSA organized a three day Workshop on Python and Embedded C under Skill Development Club on 26 September 2018.

Page 9 of 41

✓ BMESI Sahrdaya chapter sponsored workshop on PIC Microcontrollers and interfacing was conducted by Prof. Ramesh C P, VAST, Thrissur on 2 and 3 ✓ Ms. Divya Joseph (2010 Batch) interacted with the pre final year students and shared her experience as a student of Research at University of Ghent, Belgium. ✓ Mr. Ashwin (2010 Batch) interacted with the prefinal year students and shared his experience as a IT professional and encouraged students to take up Civil Service. ✓ On the occasion of tIc-f-]n-d-hn, EBSA - the technical associ-ation of Biomedical Engineering Department organized a doodle design contest ""IpØn-hc'' on 25 October 2018. ✓ Mr.AshikMoideen from S3 got selected in the inter zone Foot ball team from the E-zone tournament held at GEC, Palakkad. ✓ Third batch of “GE-Sahrdaya Advanced Medical Engineering Program”, a certification program by GE on industry ready skills for Biomedical Engineers in which a total of 59 students participated took place from 26/11/2018 to 30/11/2018. The first phase of the training was conducted at “GE- Sahrdaya Centre of Excellence for Health Care Technolo-gies” and the second phase will be conducted at “John F Welch Technology Research Centre” of GE at Bangalore. ✓ The inauguration of Sahrdaya-Agappe innovation Hub took place on 24/11/2018 and an MOU was signed with Agappe Diagnostic company. Agappe selected students from BM, BT & EC departments for training after screening test and interview. ✓ A one day training program was conducted by resource person from Agappe Diagnostic Company for selected students of BM, BT and EC students on 24/11/2018. ✓ Two teams from S8 BM, collaborated their project with Agappe diagnostics. 1) Smart phone based blood parameter monitoring system (Cyril V Mathew, Simna Simon, Jinsha Girish) & 2) Biosensor for Clinical Diagnosis of sodium from human sweat (Jincy M.V, Amal Krishna K.G, Athul K, Arsha V Kumar) ✓ Ms. Ann soniya conducted a Infosys mock test in the department on 27/2/20 ✓ Workshop was conducted by Dr. Hari C.V, Asst professor, Rajagiri school of Engineering and Technology on the topic ‘Introduction to LATEX, writing papers the right way’ on 28/2/2020 at Biomedical Signal Processing Lab, Dept. of BME. ✓ A prototype making competition on the topic “Science for Better Life” was conducted on 28th February 2020 and a team from Dept of Biomedical won first prize of Rs.1000./- ✓ Keerthi Iyer (2011-2015 Batch) Interacted with Second year students (2018-2022 batch) of Biomedical Engineering and shared her work experience and career opportunities.

Page 10 of 41

✓ Selected Students from Dept. of BME, ECE and BTE visited Agappe Diagnostics on 06-03-20.They were accompanied by Dr.Yuvaraj V, Associate Professor, Dept of BME ✓ Department of Biomedical Engineering is collaborating on the following academic projects with Jubilee Mission Medical College&Research Institute, Thrissur. ✓ Improvised varicose vein treatment system guided by Dr. Finto Raphael & Ms. Remya George. ✓ Podiatric Assistant guided by Dr. Yuvaraj Velusamy. ✓ The Automated Dialyser Filter Cleaning System guided by Dr. Yuvaraj Velusamy & Ms. Ann Soniya ✓ Walker’s suit guided by Mr. Jibin Jose. ✓ Sensitivity Analyser for Diabetic Neuropathy guided by Ms. Sony N. S ✓ Additional Skill Acquisition Program (ASAP), government of Kerala in association with Sahrdaya College of Engineering and Technology hoisted the third session of the Webinar series on 16/7/2020. Many eminent persons from Medtronic glorified the session including Madan R Krishnan, Vice President and Managing Director, Titus Arnold, Director, HR, Abhishek Bhargava, Business Head, Cardiac Rhythm and Heart Failure, Vinay Rajan, Regional Clinical Leader. The moderator for the session was Mr. Jibin Jose ✓ On June 12th, an online sendoff was given to the final year students by the 2nd year and third year students in the presence of faculty members and principal. ✓ The department of Biomedical Engineering conducted a webinar series on the topic “Post Covid Challenges and Opportunities in Biomedical Engineering”, the first of which was organised on 25/6/2020. The speaker for the session was Mr. Binu V, Assistant General Manager, Kirloskar Technologies, Pvt Limited. ✓ Additional Skill Acquisition Program (ASAP), government of Kerala in association with Sahrdaya College of Engineering and Technology hoisted the second session of the Webinar series on 9/7/2020. The speaker for the session was Mr. Mohith Manoj, Assistant Manager, R & D, Scanray Technologies, Pvt Limited and moderator was Ms. Reshma Jose. ✓ Faculties visited Agappe Diagnostics Ltd, Agappe Hills, Pattimattom P.O., Kochi as a part of Industry-academia collaboration. ✓ Dr. Jeethu Raveendran, Assistant professor, Department of Biomedical Engineering was appreciated under More from less for money (MLM) category in SHRISTI - Gandhian Young Technological Innovation (GYTI) Awards 2019. ✓ Department of Biomedical engineering achieved Six ranks in top ten ranks published by KTU for the 2015-2019 Batch. ✓ Service Engineer Mr Jinesh from BPL Thrissur explained the electronics inside of a patient monitoring system to 2016-2020 Batch Students on 06-08-19. ✓ Ms Annsoniya, Assistant professor in the Dept of Biomedical engineering visited NIPMR (National Institute of Physical Medicine and Rehabilitation) for discussing project ideas with the clinicians.

Page 11 of 41

✓ Mr.Naveen Prakash. ZONAL MANAGER, TRANSASIA BIOMEDICALS LTD heading Kerala operations.One hour session on career opportunities and invitro diagnosis. ✓ Invited talk by Mr. DavidIgnatius,Servicemanager, GE healthcare Kerala And Mr. Santhosh Babu , Territory Manager, GE Healthcare. Mr. SanthoshBabu explained about the basic medical imaging modalities and Mr. David Ignatius interacted with Final Year and Pre Final Year students regarding career opportunities. ✓ Students of BME Dept. (2014-2018 Batch) Ms. Jasmine Francis, Ms. Athira Joseph, Ms. Meghna Wilfred and Ms. Jiby Krishna achieved top five University rank in the B.Tech Biomedical Engineering Degree Examination. ✓ Additional Skill Acquisition Program (ASAP), government of Kerala in association with Sahrdaya College of Engineering and Technology hoisted the third session of the Webinar series on 16/7/2020. Many eminent persons from Medtronic glorified the session including Madan R Krishnan, Vice President and Managing Director, Titus Arnold, Director, HR, Abhishek Bhargava, Business Head, Cardiac Rhythm and Heart Failure, Vinay Rajan, Regional Clinical Leader. The moderator for the session was Mr. Jibin Jose.

2. Department Of Biotechnology Engineering

Course : B.Tech in Biotechnology Engineering Level : UG 1st Year of approval by AICTE : 2002

Batch 2014-18 2015-19 2016-20 Year wise Sanctioned Intake 60 60 60 Actual Admn 55 63 63 Qualifying Mark As per the directions of the State Government & University. No of Students passed (%) 40.38 71.43 63.49 Students Placed 16 19 13 Average Pay package 2.70 1.5 3 Students Opted for Higher 22 22 9 Studies

Accreditation Status of Course : Accredited by NAAC & The Institution Of Engineers (INDIA) PG courses : M.Tech, Industrial Bio-Technology Doctoral Courses : Yes Foreign Collaboration : Not applied Professional Society Membership

1. IEEE (Institution of Electrical and Electronics Engineers

Page 12 of 41

2. ISTE ( Indian Society for Technical Association) 3. M I E ( Member Institution of Engineers India) 4. A I C H E (US) ( American Institute of Chemical Engineering) 5. IICE Indian Institute Of Chemical Engineering

Professional Activities Faculty: ✓ Faculty Orientation Programmes: Teaching through learning and then learning through Teaching is part of the continuous enrichment process for any teacher. It is with this noble aim that the Management is arranging Faculty Orientation programme twice in a year. Eminent personalities from outside are invited and the programme includes various teaching methods, etc. to suit the developing technologies. ✓ Training programme for Supporting / Housekeeping & Maintenance staff: The HRD Department of our Institution will conduct training programme for all the Supporting, House keeping and maintenance staff twice in a year, to mould them to suit the requirements of the Institution and its developments. ✓ Technical meet of Faculty: Technical meet of the faculty is conducted monthly with paper presentation and discussion. ✓ Daily Work Report of Faculty: All the staff members have to submit their detailed daily work report to the Head of the Institution through their Head of the Department. Students: ✓ Hand Book on Teaching Plan & Work plan: We have the practice of providing Teaching Plan and Work Plan to every student at the beginning of each semester. This handbook provides the information about the topics that will be taught in each class, and details of books to be referred for each topic etc., So that students can come prepared for attending each class. ✓ Question Bank: Question Bank in each subject containing the previous University Questions and all the possible questions in the subject will be provided in a book form to everyone, at the beginning of semester. ✓ Tutorials: Tutorial Classes are conducted in every subject, most effectively by dividing the class into two. This helps the students to develop skills on solving analytical questions. ✓ Project Works: Students are insisted to do one project in every semester in addition to the Curriculum insisted one. Project allowance is given to the students for the same, and best project will be awarded. Thus, every student before completing their Course will be doing minimum 7 Projects in the area of their specialization. We are also providing a financial assistance of Rs. 500/- (Rupees Five hundred) for each project. ✓ Outside Projects: Our students are permitted to do outside projects in connection with their specialization. The students of Biotechnology engineering are currently doing project for ANERT (Agency for Non- Conventional Energy & Rural Technology), DSTE and IEI.

Page 13 of 41

✓ Outside Competitions: We are promoting our students to participate outside competitions in sports, arts, technical, quiz, etc. and they have bagged so many prizes. ✓ Technical Seminars: All the students have to take up seminar in every semester during their course. Compulsory time is allotted in the timetable for each class. ✓ Remedial Classes: Remedial Classes in selected subjects are being conducted for the weak students

Consultancy Activities:

✓ Water and Waste Water testing Centre approved by Kerala State Pollution Control Board ✓ Placement facilities: A full time Placement Officer is appointed to co-ordinate and monitors the placement functions. The pivotal goal of his cell is to facilitate a healthy relation between the Institute and the relevant Industries, thereby ensuring placement for the maximum number of students. In addition, this cell maintains a database of various prospective employers that will help the students gain the much vital industrial exposure. Resume of all the final year students would be uploaded in the college website to ease the short listing of suitable students by various industries. ✓ The Entrepreneurship Development Club: An Entrepreneurship Development Club has also been formed for the benefit of students. The aim of this club is to develop entrepreneurship skills of young engineers and make them job providers instead of job seekers. ✓ NSS Cell: National Service Scheme has also been formed for developing National Integrity and Service Mentality among students and also to the Society.

Departmental Achievements:

✓ A training program for S5 and S3 students (10 each) was arranged on 28 September, 2018 on INDESIGN SOFTWARE. The session was handled by Mr. Atul Balachander of S7. ✓ In connection with the world food day, on Oct 16 BEATS organized a poster presentation competition, based on the theme ‘Famine: food scarcity’. ✓ Biotech Research Society, India Institute Chapter was inaugurated on September 15, 2018. The programme was inaugurated by Dr. Deepthy Menon, Professor, Centre for Nanoscie-nces and Molecular Medicine, Amritha Vishwa Vidyapeetham, Kochi. She also delivered a technical talk on ‘Nanoparticles for Drug Delivery’. The Department Newsletter ‘BIOBEADS 2018’ was released by Rev Fr. George Pareman, which was received by Dr.Sudha George Valavi, Joint Director. Dr Nixon Kuruvila, Principal felicitated and addressed the gathering. ✓ Ms P Praveena and Dr. Dhanya Gangadharan addressed the XII standard students of St Mary’s HSS, Irijalakuda on the topic Waste

Page 14 of 41

Management as a part of Science popularisation program on November 2, 2018 ✓ A talk on “Biotechnology and health Industry” delivered by Dr. Dhanya Gangadharan was arranged for the students of XI and XII standard of Little Flower Convent, Irinjalakuda on November 17, 2018 as a part of the Science popularization program. ✓ A team from S5 BT (Mr. Najeeb Bin Haneef O, Mr. Bristo Lorence, Mr. Britto Lorence, Mr. Aakash P & Mr. Amal Jose Thomas) won the ‘Best Innovative Product’ award for their product ‘B-Lite’ at SRM University on 26 ✓ A team from S7 BT (Mr. Siby Issac, Mr. Mame Bajo, Mr. Abhilash MK, Mr. Niranjan Sooraj& Mr. Achyuthanand) won the 3 prize in RISC 2018, a competition conducted by NIRDPR. ✓ A team from S7 BT (Ms. Thamanna Musthafa, Ms. Libna Lawrance, Ms. Sherin Shams, Ms. Jain Rose) participated in the Regional Convention of the AICTEECI-ISTE ChhatraVishwakarma Awards 2018, held at Acharya Institute Of Technology, Bangalore on 31 october 2018. The team got selected for the National Level Competition which will be held at New Delhi, in January 2019. ✓ A team from M.Tech S3, IBT (Ms. Aleena Sebastian, Ms. Merin Raju, Ms. Anumol S. Kottackal, Ms. Anitta Sunny) participated in Ibeto competition held at Govt Model engineering college, Thrikkakara on 1 November 2018. The team secured prize of Rs. 35000. ✓ Department of Biotechnology Engineering organized a Conference on Molecular Tools and Disease Diagnosis sponsored by AICTE on 3rd, 4th and 5th October 2019 at the College Campus. ✓ Department of Biotechnology Engineering is collaborating on the following final year academic project with AGAPPE Diagnostics Pvt Ltd. ✓ Cholesterol biosensor project of S7 students Nourin Shakeeb, Rakesh V. R., Sreelakshmi Rajesh, Riya Thomas guided by Ms Ranimol G. ✓ Students presented papers and posters in the Undergraduates category in AICTE sponsored conference on Molecular Tools and Disease Diagnosis conducted during 3rd, 4th and 5th October 2019 in SCET. ✓ An Invited talk by Mr Sunil Thomas, DGM, Product Development, Arjuna Naturals Ltd was conducted for all students in the Department on 18th January 2020. ✓ A student interactive session on the topic “Waste Management” by Dr. C.N. Manoj (Pelican Foundation, Alappuzha) on February 2020. ✓ A technical talk on “How to use E-resources in the Biotechnology field effectively” by Mr. Nandalal, Senior Training Manager of South India EBSCO Information Series & IEEE on 5th February 2020. ✓ In connection with National Science Day, A prototype making competition was organized on the theme ‘Science for a Better Life’ on 28th February 2020. ✓ Three teams from S7 BT (Nimi James, Neena T.K., Neeraj Ramesh,

Page 15 of 41

Najeeb Bin Haneef O, Amal Jose Thomas, Anju P.M., Adasrh Vishnu, Adityah Ganesh, Steffi Seelia Alphonso, Sujitha Unnikrishnan, Varsha J, Varsha P Ramesh) participated in Srishti 2020 hosted at Saintgits Engineering College, Kottyam. ✓ A team from S3 BT (Dimple Jose, Geethika, Fidha Aboobacker, Jini K Biju) had participated in Srishti 2020 at Saintgits, Kottayam. ✓ 6 students from S6 BT had participated in a workshop on Virtual Reality and Augmented Reality at NIT Calicut on 10th January 2020. ✓ Adityah Ganesh, Aakash P, Varsha J had qualified in the GATE Examination 2020. ✓ Students of S4 visited Rubber Research Institute of India, Keezhukunnu, Kottayam on 5th March 2020. ✓ Anjali P S and Milan Maria Sajeev of S6 BT had attended an International Conclave on Skills (ICSET 2020) at Government Engineering College, Thrissur.

3. Department Of Civil Engineering

Course : B.Tech in Civil Engineering Level : UG 1st Year of approval by AICTE : 2012 Batch 2014-18 2015- 2016-20 19 Year wise Sanctioned Intake 60 60 60 Actual Admn 63 62 63 Qualifying Mark As per the directions of the State Government & University. No of Students passed (%) 41.94 77.19 49.09 Students Placed 19 15 6 Average Pay package 2.5 1.6 2.5 Students Opted for Higher 9 9 7 Studies

Accreditation Status of Course : Accredited by NAAC & The Institution Of Engineers (INDIA) PG COURSES : NO Doctoral Courses : NO Foreign Collaboration : Not Applied Professional Society Membership

1. ISTE (Indian Society for Technical Association) 2. M I E (Member Institution of Engineers India) 3. M A S C E (Member American Society of Civil Engineers) 4. IPHE (Institution of Public Health Engg.) 5. IEEE (Institution of Electrical and Electronics Engineers)

Professional Activities

Page 16 of 41

• Testing facility for building materials.

Faculty: • Faculty Orientation Programmes: Teaching through learning and then learning through teaching is part of the continuous enrichment process for any teacher. It is with this noble aim that the Management is arranging Faculty Orientation programme twice in a year. Eminent personalities from outside are invited and the programme includes various teaching methods, etc. to suit the developing technologies. • Training programme for Supporting / Housekeeping & Maintenance staff: The HRD Department of our Institution will conduct training programme for all the Supporting, House keeping and maintenance staff twice in a year, to mould them to suit the requirements of the Institution and its developments. • Technical meet of Faculty: Technical meet of the faculty is conducted monthly with paper presentation and discussion. • Daily Work Report of Faculty: All the staff members have to submit their detailed daily work report to the Head of the Institution through their Head of the Department.

Students: • Hand Book on Teaching Plan & Work plan: We have the practice of providing Teaching Plan and Work Plan to every student at the beginning of each semester. This handbook provides the information about the topics that will be taught in each class, and details of books to be referred for each topic etc., So that students can come prepared for attending each class. • Question Bank: Question Bank in each subject containing the previous University Questions and all the possible questions in the subject will be provided in a book form to every one, at the beginning of semester. • Tutorials: Tutorial Classes are conducted in every subject, most effectively by dividing the class into two. This helps the students to develop skills on solving analytical questions • Project Works: Students are insisted to do one project in every semester in addition to the Curriculum insisted one. Project allowance is given to the students for the same, and best project will be awarded. Thus, every student before completing their Course will be doing minimum 7 Projects in the area of their specialization. We are also providing a financial assistance of Rs. 500/- (Rupees Five hundred) for each project. • Outside Projects: Our students are permitted to do outside projects in connection with their specialization. • Outside Competitions: We are promoting our students to participate outside competitions in sports, arts, technical, quiz, etc. and they have bagged so many prizes.

Page 17 of 41

• Technical Seminars: All the students have to take up seminar in every semester during their course. Compulsory time is allotted in the timetable for each class. • Remedial Classes: Remedial Classes in selected subjects are being conducted for the weak students

Departmental Achievements: ✓ Civil Department had conducted an Idea contest program on the topic ‘disaster mitigation’ and the best Idea was appreciated with a cash award of Rs.1000 and Rs.500 as first and second prizes. ✓ Institution of Engineers India (IEI) Student Chapter of Department of Civil Engineering inauguration was held on 22nd August, 2019 by Mr. V. G. Sankaranarayan FIE, IEI Chairman Thrissur local centre. ✓ A demonstration class on virtual reality in civil engineering was held on 31/08/2019 from 10am to 12 noon for the seventh semester students (2016 batch) by a team headed by Mr. Vidyaraj, Cadclass, Thrissur. ✓ A technical talk on ‘Kerala Building Rules’ was offered to the third semester students (2018 batch) on 27/09/2019 from 3pm to 5pm. The speaker was Mr. Pradeep, Assistant Town Planner, Thrissur Urban Development Corporation. ✓ A technical talk on ‘Green Building’ was offered to the fifth semester students (2017 batch) on 04/10/2019 from 2pm to 5pm. The speaker was Mr. Sreejith, Architect and Entrepreneur, C Earth Pvt Ltd. Thrissur ✓ All the students of 2017-2021 CE batch are joined in IEI Student Chapter, Department of Civil Engineering, SCET. ✓ Department conducted a GIS workshop for S6 students on 17-19th February 2020 by Zeitnah Institute of survey. ✓ Many students successfully completed online certification course in various field of Civil Engineering.

4. Department Of Computer Science & Engineering

Course : B.Tech in Computer Science & Engineering Level : UG 1st Year of approval by AICTE 2002

Batch 2014-18 2015-19 2016- 20 Year wise Sanctioned Intake 120 120 120 Actual Admn 125 112 121 Qualifying Mark As per the directions of the State Government & University. No of Students passed (%) 34.71 71.43 63.06

Page 18 of 41

Students Placed 104 80 76 Average Pay package 5 1.8 3 Students Opted for Higher 3 5 6

Accreditation Status of Course : Accredited by NAAC & The Institution Of Engineers (INDIA) PG Courses : M.Tech, Computer Science Engg. Doctoral Courses : Yes Foreign Collaboration : Not Applied Professional Society Membership

1. IEEE (Institution of Electrical and Electronics Engineers) 2. ISTE ( Indian Society for Technical Association) 3. M I E ( Member Institution of Engineers India) 4. CSI(Computer Society Of India)

Professional Activities Faculty: ✓ Faculty Orientation Programmes: Teaching through learning and then learning through teaching is part of the continuous enrichment process for any teacher. It is with this noble aim that the Management is arranging Faculty Orientation programme twice in a year. Eminent personalities from outside are invited and the programme includes various teaching methods, etc. to suit the developing technologies ✓ Training programme for Supporting / Housekeeping & Maintenance staff: The HRD Department of our Institution will conduct training programme for all the faculties. ✓ Technical meet of Faculty: Technical meet of the faculty is conducted monthly with paper presentation and discussion. ✓ Daily Work Report of Faculty: All the staff members have to submit their detailed daily work report to the Head of the Institution through their Head of the Department

Students:

✓ Hand Book on Teaching Plan & Work plan: We have the practice of providing Teaching Plan and Work Plan to every student at the beginning of each semester. This handbook provides the information about the topics that will be taught in each class, and details of books to be referred for each topic etc., So that students can come prepared for attending each class. ✓ Question Bank: Question Bank in each subject containing the previous University Questions and all the possible questions in the subject will be provided in a book form to every one, at the beginning of semester. ✓ Tutorials: Tutorial Classes are conducted in every subject, most effectively by dividing the class into two. This helps the students to develop skills on solving analytical questions. ✓ Project Works: Students are insisted to do one project in every semester in addition to the Curriculum insisted one. Project allowance

Page 19 of 41

is given to the students for the same, and best project will be awarded. Thus, every student before completing their Course will be doing minimum 7 Projects in the area of their specialization. We are also providing a financial assistance of Rs. 500/- (Rupees Five hundred) for each project. ✓ Outside Projects: Our students are permitted to do outside projects in connection with their specialization. ✓ Outside Competitions: We are promoting our students to participate outside competitions in sports, arts, technical, quiz, etc. and they have bagged so many prizes. ✓ Technical Seminars: All the students have to take up seminar in every semester during their course. Compulsory time is allotted in the timetable for each class. ✓ Remedial Classes: Remedial Classes in selected subjects are being conducted for the weak students.

Consultancy Activities: ✓ Placement facilities: A full time Placement Officer is appointed to co- ordinate and monitors the placement functions. The pivotal goal of his cell is to facilitate a healthy relation between the Institute and the relevant Industries, thereby ensuring placement for the maximum number of students. In addition, this cell maintains a database of various prospective employers that will help the students gain the much vital industrial exposure. Resume of all the final year students would be uploaded in the college website to ease the short listing of suitable students by various industries. ✓ The Entrepreneurship Development Club: An Entrepreneurship Development Club has also been formed for the benefit of students. The aim of this club is to develop entrepreneurship skills of young engineers and make them job providers instead of job seekers. ✓ NSS Cell: National Service Scheme has also been formed for developing National Integrity and Service Mentality among

Departmental Achievements

✓ Invited talk on “Latest Technologies” for S5 and S7 - Computer Science students by Dr. Mendrus Jacob, Mr. Shirish V Pandey and Jaimon Kuriakose on 12 October 2018. ✓ Invited talk on “Awarness of Microsoft Certification Course “for S5 and S7 - Computer Science students by Mr. Rakesh. ✓ MoU signed between RedHat and SCET on October 12,2018 ✓ Invited talk on “Ethical Hacking” for S7 - Computer Science students by Liveware ✓ Conducted a Technical Quiz competition for CSE students on 5th September 2019 in association with ACES and CSI. ✓ Conducted a Poster making Competition by ACES and CSI In connection with Engineer’s Day on 18th September 2019 ✓ Conducted a Technical Talk on Industry Expectation for S5 and S7 CSE

Page 20 of 41

Students on 25th September 2019 ✓ Conducted a Workshop on Advanced Python Programming Work shop for 2018-22 CSE Batch Students on 25th September 2019 ✓ Conducted a Workshop on Android App Development for Higher Secondary Students by Jobel Johny, Mary Siby and Rachel from 2017- 21 Batch CSEB ✓ Dept. of Computer Science Conducted a state level inter School Web Page Designing Competition for Higher Secondary Students on 30th November 2019. ✓ Conducted a work shop named “TECHNOLOGY IN MODERN ERA” for sslc students on 5th September 2019 ✓ Conducted a month-long celebration of open source software brought to you by digital ocean and The Practical Dev. ... hack to be fest. ✓ Conducted a Work shop on Android App Development Contest Apk1.0 ✓ Program Real World Workshop - Workshop was for the first year students on IOT & APP Development. ✓ 20 Students of S5 CSA attended a Workshop and Lecture (Tathva’19) at NIT Calicut on 18th - 20th October 2019. ✓ Vishnu Chandran, Joyal Thomas, Joseph K Anoj and Vimal from S5 CSEB attended a Workshop in IIT Madras on Android Development on 13th and 14th October. ✓ All S5 and S3 female students of CS Dept. attended Two days’ Workshop on WING- Women Rise Together on 18 and 19 October 2019 conducted by Start Up India and Dept. for Promotion of Industry and Internal Training. ✓ The Students of S5 CS Completed Machine Learning Workshop in the Regional Rounds of SamPark Conducted by Shaastra On 3rd November 2019 in Chalakudy. ✓ Archana P S Participated in Cyber Forensic and Ethical Hacking By Programmers, on 31st August 2019. ✓ Mr. Astle John, 2016-2020 batch ECE student was a part of LUMOS, a multipurpose decontamination device by Devaditek Innovations-a startup of Sahrdaya. It can sanitize items like N95 masks and vegetables and help check Covid-19 spread.Lumos, which collaborates with the Collegiate Congress under the United Nation’s Master Plan initiative, is also being distributed overseas where the pandemic has hit the hardest. The first lot is getting shipped to Mali, Ecuador, Zimbabwe, Ghana and Haiti, with the support of the Collegiate Congress of the UN Master Plan. ✓ Mobile app based control section of this UV sanitization device of IBIS Medical Systems is developed by IEDC Hardware Club leaders Richard Joy and Joseph Joshy (Final Semester ECE students).

✓ Department Of Electronics & Communication Engineering

COURSE : B.Tech In Electronics & Communication Engineering Level : UG

Page 21 of 41

1st Year of approval by AICTE: 2002 Batch 2014-18 2015-19 2016-20 Year wise Sanctioned Intake 120 120 120 Actual Admn 124 103 61 Qualifying Mark As per the directions of the State Government & University. No of Students passed (%) 43.9 67.01 55.35 Students Placed 62 52 37 Average Pay package 3 1.8 3 Students Opted for Higher 17 11 6

Accreditation Status of Course : Accredited by NAAC & The Institution Of Engineers (INDIA)

PG COURSES : M.Tech, Embedded System Doctoral Courses : Yes Foreign Collaboration : Not Applied

Professional Society Membership

✓ IEEE (Institution of Electrical and Electronics Engineers) ✓ ISTE ( Indian Society for Technical Association) ✓ M I E ( Member Institution of Engineers India) ✓ Indian society of Electronics Engineers

Professional Activities

Faculty: ✓ Faculty Orientation Programmes: Teaching through learning and then learning through teaching is part of the continuous enrichment process for any teacher. It is with this noble aim that the Management is arranging Faculty Orientation programme twice in a year. Eminent personalities from outside are invited and the programme includes various teaching methods, etc. to suit the developing technologies. ✓ Training programme for staff: The HRD Department of our Institution will conduct training programme for all staff twice in a year, to mould them to suit the requirements of the Institution and its developments. ✓ Technical meet of Faculty: Technical meet of the faculty is conducted monthly with paper presentation and discussion. ✓ Daily Work Report of Faculty: All the staff members have to submit their detailed daily work report to the Head of the Institution through their Head of the Department.

Page 22 of 41

Students: ✓ Hand Book on Teaching Plan & Work plan: We have the practice of providing Teaching Plan and Work Plan to every student at the beginning of each semester. This handbook provides the information about the topics that will be taught in each class, and details of books to be referred for each topic etc., So that students can come prepared for attending each class. ✓ Question Bank: Question Bank in each subject containing the previous University Questions and all the possible questions in the subject will be provided in a book form to everyone, at the beginning of semester. ✓ Tutorials: Tutorial Classes are conducted in every subject, most effectively by dividing the class into two. This helps the students to develop skills on solving analytical questions. ✓ Project Works: Students are insisted to do one project in every semester in addition to the Curriculum insisted one. Project allowance is given to the students for the same, and best project will be awarded. Thus, every student before completing their Course will be doing minimum 7 Projects in the area of their specialization. We are also providing a financial assistance of Rs. 500/- (Rupees Five hundred) for each project. ✓ Outside Projects: Our students are permitted to do outside projects in connection with their specialization. ✓ Outside Competitions: We are promoting our students to participate outside competitions in sports, arts, technical, quiz, etc. and they have bagged so many prizes. ✓ Technical Seminars: All the students have to take up seminar in every semester during their course. Compulsory time is allotted in the timetable for each class. ✓ Remedial Classes: Remedial Classes in selected subjects are being conducted for the weak students

Consultancy Activities

✓ Placement facilities: A full time Placement Officer is appointed to co- ordinate and monitors the placement functions. The pivotal goal of his cell is to facilitate a healthy relation between the Institute and the relevant Industries, thereby ensuring placement for the maximum number of students. In addition, this cell maintains a database of various prospective employers that will help the students gain the much vital industrial exposure. Resume of all the final year students would be uploaded in the college website to ease the short listing of suitable students by various industries. ✓ The Entrepreneurship Development Club: An Entrepreneurship Development Club has also been formed for the benefit of students. The aim of this club is to develop entrepreneurship skills of young engineers and make them job providers instead of job seekers.

Page 23 of 41

✓ NSS Cell: National Service Scheme has also been formed for developing National Integrity and Service mentality among students and also to the Society Departments Achievements; ✓ An FDP was conducted on “Fundamentals on Project Guidance” in the topic Embedded & signal processing from 4 to 6 July 2018. ✓ Department of Electronics and Communication Engineering in association with Entrepreneurship Development Cell of IIT- Roorke and Finland Labs, New Delhi organized a two day National Level Workshop in “Artificial Intelligence” on 10 and 11 of July 2018. ✓ An alumni interaction was conducted for 2015 batch students on 01/08/2018. Mr. Ritchu Davies (2013 - 2017) delivered the talk. ✓ An invited talk on IOT & Data Analytics was delivered to 2015 and 2016 batch students by Mr. Anoop Santhosh, CTO, Ronds Technologies Pvt. Ltd., Ernakulam on 06/08/18. ✓ EMAGE organized a PCB Design workshop for 1st year EC students in connection with Engineer’s Day celebration on 17 September 2018 ✓ EMAGE organized a two day workshop on “Electronic product Building” for 2017 batch ECE students on 13 and 14 October ✓ EMAGE conducted a three day KSCSTE sponsored state level workshop on “FPGA Design” from 1 to 3 November 2018. ✓ EC Dept conducted ROBOTICS Workshop for GOVT VHSC GIRLS, IJK 27th September 2019. ✓ EC Dept conducted ROBOTICS Workshop for SN School, Irinjalakuda 11 October 2019 ✓ An Internship program on basics of Robotics was organized by Hardware Club, in association with EMAGE on 10 July 2019. ✓ A Peer skill training session on arduinoprograming was given to S3 ECE students on 26th Sept, 2019. Trainers:Richard Joy, Joseph and Astle of S7 ECE. ✓ 2017 batch ECE students conducted an Industrial Visit Trip in July 2019. ✓ A Student project of Mr. Arun Krishna, Ms. Smera Kurian, Ms. Angel Joshna under the Guideship of Dr. Gnana King shortlisted for the AICTE Vishwakarma Award 2019. ✓ Mr. Fabius has organized a seminar in Sahrdaya College of Engineering & Technology to create awareness about summer internships among students as per internshala student internship program. ✓ An Internship program on basics of Robotics was organized by Hardware Club, in association with EMAGE on 10 July 2019. 55 students of 2018 admissions from various branches and lab assistants attended the same. ✓ 5 students of S5 ECE participated in Expert lecture by Gabe Gabrielle, Former Engineer, NASA, on 10th of Oct 2019 at Christ College, Irinjalakuda. ✓ 2 students Agnet Soman and Alisha Jose of S4 ECE participated in Kerala startup mission Hackathon on Women and business better through technology.

Page 24 of 41

✓ 3 students: Mr. Fabius S Thottappily of ECE 2017-2021 batch, Nicemol of 2018 batch and Nima Cherian of 2015 batch was awarded the Best Academic Performer Award among all colleges of Thrissur district by UIT group international. ✓ Students from 2016 and 2017 batch attended a 5 day workshop on Basics of C programming from Jan 7 to Jan 13, 2020. ✓ Alumni of 2017 pass out batch Mr. Manuel Johnson interacted; Developer at TATA Elxi interacted with 2016 batch students on 17th Jan 2020. Mr. Manuel secured a reward of 2000 US dollar from facebook for finding out a security breach in Whatsapp.He was also included in 2018 Hall of Fame number 66. ✓ Industrial interaction by Mr. Ayyapadas, Hardware Developer at Intel for 2017 batch on 16th Jan 2020. ✓ Industrial interaction by Mr. Shidhin , Senior Google Developer working at Namshi, Dubai for 2017 & 2018 batch on 24th Jan 2020. ✓ Mr. Anoop Santosh, CTO of Ronds Technology, Cochin interacted with students of 2017 and 2018 batch admissions on the topic Emerging Trends in Industries. ✓ Industrial visit to CMET, thrissur as part of national science day on 27th February 2020. ✓ An Industial visit to Agappee Diagnostic centre field visit on 6-3-2020 for students in Agappee Training ✓ Peer skill sharing on Arduino was conducted on18th Feb 2020 by and for 2017 batch ECE students. ✓ Seminar on Road map to Internship powered by internshala was conducted on 6 March 2020 for 2017 and 2018 batch admissions of ECE by Mr. Fabius S Thottapilly of S6 ECE ✓ Covid Safety Initiatives by ECE Department : - o Sanitizer preparation: o Automatic hand sanitizer

✓ Department Of Electrical & Electronics Engineering COURSE : B.Tech in Electrical & Electronics Eng Level : UG 1st Year of approval by AICTE 2011

Batch 2014-18 2015-19 2016-20 Year wise Sanctioned Intake 60 60 60 Actual Admn 61 51 54 Qualifying Mark As per the directions of the State Government & University. No of Students passed (%) 41.38 66.67 51.11 Students Placed 30 32 21 Average Pay package 2.75 1.8 3

Page 25 of 41

Students Opted for Higher 5 1 4 Accreditation Status of Course : Accredited by NAAC & The Institution Of Engineers (INDIA) PG COURSES : NO Doctoral Courses : NO Foreign Collaboration : Not Applied

Professional Society Membership

✓ ISTE ( Indian Society for Technical Association) ✓ M I E ( Member Institution of Engineers India) ✓ IEEE (Institution of Electrical and Electronics Engineers)

Professional Activities

Faculty: ✓ Faculty Orientation Programmes: Teaching through learning and then learning through teaching is part of the continuous enrichment process for any teacher. It is with this noble aim that the Management is arranging Faculty Orientation programme twice in a year. Eminent personalities from outside are invited and the programme includes various teaching methods, etc. to suit the developing technologies ✓ Training programme for Supporting / Housekeeping & Maintenance staff: The HRD Department of our Institution will conduct training programme for all the Supporting, House keeping and maintenance staff twice in a year, to mould them to suit the requirements of the Institution and its developments. ✓ Technical meet of Faculty: Technical meet of the faculty is conducted monthly with paper presentation and discussion. ✓ Daily Work Report of Faculty: All the staff members have to submit their detailed daily work report to the Head of the Institution through their Head of the Department.

Page 26 of 41

of semester. ✓ Tutorials: Tutorial Classes are conducted in every subject, most effectively by dividing the class into two. This helps the students to develop skills on solving analytical questions. ✓ Project Works: Students are insisted to do one project in every semester in addition to the Curriculum insisted one. Project allowance is given to the students for the same, and best project will be awarded. Thus, every student before completing their Course will be doing minimum 7 Projects in the area of their specialization. We are also providing a financial assistance of Rs. 500/- (Rupees Five hundred) for each project. ✓ Outside Projects: Our students are permitted to do outside projects in connection with their specialization. ✓ Outside Competitions: We are promoting our students to participate outside competitions in sports, arts, technical, quiz, etc. and they have bagged so many prizes. ✓ Technical Seminars: All the students have to take up seminar in every semester during their course. Compulsory time is allotted in the timetable for each class. ✓ Remedial Classes: Remedial Classes in selected subjects are being conducted for the weak students

Departments Achievements

✓ AESON conducted a design contest titled PREDICT THE FUTURE for the students of Sahrdaya on 17 September 2018. ✓ An interactive session was conducted on the topic “Technological Temper” by Sir Sebastian VT, PMP, Class A controller Director, Maxton institute of technology on 4 October 2018. ✓ EEE department had conducted a workshop on DEMO WORKSHOP ON REVIT MEP on 4 October 2018. The session was handled by Mr. Jackson and team of CAD labs limited Thrissur. ✓ An alumni interaction by one of our alumni Adarsh K Sasi was conducted on 22 October 2018 for S7 EEE. ✓ On behalf of the AESON, EEE Department had donated an LED Rosary to the college on 5 October 2018. ✓ Department of Electrical and Electronics Engineering had signed an MOU with CADCENTER, Indian Educational Enterprises (P) Ltd, Kodungallur on 30/07/2019. ✓ EEE Department in association with KSEB officer’s association conducted college level (Level I) competition of power quiz 2019 at Sahrdaya College of Engineering & Technology, Kodakara on 3rd October. ✓ EEE Department conducted Led bulb making workshop at St. George HSS Pariyaram as a part of NSS camp on 28/9/2019. ✓ EEE Department conducted a Technical talk on the topic, “Lighting Design/ ECAD” for S7 EEE students on 02/11/2019 by CADDPRO

Page 27 of 41

Training Center. ✓ EEE department conducted a Quiz Competition for all students on 23/10/2019 in connection with World Development Information Day at 3 PM in Room No. 107, Decennial block. ✓ Geo Joy and Ashik K S of S7 EEE got selected to University Badminton team. ✓ Abhay Ramesh and AnanyaMenon of S3 EEE passed in NPTEL course on “Introduction to C Programming.” ✓ Conducted a workshop on “Piccolo Microcontroller and its applications” for S4 EEE students on 23/01/2020 during 1 pm – 4 pm by MC Technologies. ✓ Conducted a 5 day hands-on training on Autocad 2D for S8 EEE students by ✓ CADCENTRE Kodungallur. ✓ EEE department conducted a Technical Talk on “Electrical Design & Drafting” for S8 EEE students on 18/2/2020 by Mr Akhilesh Kumar C, Grade A Electrical Supervisor, MTTC International LLC, Ernakulam. ✓ Delbin K Biju & Harikrishnan K B S6 EEE &Alwin Anto & Shyamkrishna A S of S8 EEE presented a paper on “Power System Resilience Strategies in Kerala Perspective” in the District level Seminar Competition organized by the KSEB Engineers’ Association on 19/2/2020. ✓ Delbin K Biju of S6 EEE &Melwin Davis of S4 EEE has attended Electrical Engineering & Associated Streams Session as a part of second edition of Professional Students’ Summit held at CUSAT, Kalamassery on 15/2/2020. ✓ Aveens Varghese & Fresy Mariya Francis of S6 EEE has attended International Conclave on Industrial Revolution 4.0, organized by ICT Academy of Govt. of Kerala at GEC Thrissur on 06/3/2020 & 07/3/2020. ✓ Navya Mohan of EEE 2018 - 2022 batch was awarded the Best Academic Performer Award among all colleges of Thrissur district by UIT group International.

Page 28 of 41

XIV. LABORATORY & WORSHOP

Page 29 of 41

Page 30 of 41

COMPUTER CENTRE FACILITIES

LIBRARY

Page 31 of 41

AUDITORIUM

Page 32 of 41

CAFETARIA

Page 33 of 41

INDOOR SPORTS FACILITIES

Page 34 of 41

OUTDOOR SPORTS FACILITIES

GYMNASIUM FACILITIES

Page 35 of 41

OTHER FACILITIES TRANSPORT FACILITY

MEDICAL & OTHER FACILITIES AT HOSTEL

Page 36 of 41

Page 37 of 41

STUDY HUTS

OTHER INITIATIVES: GE Sahrdaya. Centre for Excellence for Healthcare Technologies

Page 38 of 41

Page 39 of 41

XV. ACADEMIC SESSIONS : As per the directions received from the University. EXAMINATION SYSTEM, YEAR/ SEM : Semester wise examination PERIOD OF DECLARATION OF RESULTS: Results are published by University. ANIMATOR & STUDY GROUP SYSTEMS: The entire student in the class is divided into small groups of ten and one faculty member is assigned to them as animator. The animator will provide counseling and guidance to the students and there will be various Programmes conducted by the study groups in the form of Group Discussion, Debate, Product Marketing, Skit, and Mock Parliament, etc.

✓ Personality Development Programme: Education means the overall development of the students in all aspects. We focus on physical, social, mental and spiritual aspects of students. Human development Programmes are planned to improve personality through dynamism and to initiate participation for personal benefit. They also aim at intellectual and emotional maturity, moral and behavioral maturity. They are dedicated to social commitment, social ethics, love towards institutions, love towards nation and manners, dignity and aristocracy of profession and responsibility, group dynamism and group work for leadership. Qualified Trainers are giving regular Training in Personality Development to the students. Classes are also being conducted in Moral Science, Health Science, and Yoga etc. under this Programme ✓ Yoga classes: To keep one’s mind serene in the highly stressed world of today, Sahrdaya offers yoga classes. These classes aim at easing the

Page 40 of 41

tension of the students, bringing them inner peace and improving their concentration, general health and fitness. ✓ Moral Science: We are providing Moral science classes to students to enrich their values ✓ Health Science: Health science classes are also provided to the students to equip them for a healthy life. ✓ Coaching for Civil Service Entrance Examinations: Regular Coaching classes are being conducted for students, interested in taking up Civil Service Examinations. ✓ Coaching for competitive Examinations: Classes for the students willing to take up GATE, GRE, etc. is also being conducted. ✓ Language Classes: Spoken Language Classes are being conducted to the interested students in English / French / Germen ✓ Peer Group: Peer Group aims instilling the qualities of co- operation, tolerance, accommodation, team spirit, rational conscience and scale of values and competition, in the students. A staff animator will assist a group of 10 in group activities. Group discussions are held every week as part of study group activities. Students Activity Body Students Council: A Students Council has also been formed for the College, wherein the Students from different semesters occupy the office of the council, such as Chair person, Vice Chair person, General Secretary, Sports Secretary, Arts Secretary and Student Editor. Students Council is in charge of conducting Arts and Sports activities, celebrations of various functions, College day, College magazine,etc

■■■■■

Page 41 of 41