MP SPARK MP OWNER’S MANUAL OWNER’S

MP SPARK HOLDEN.COM.AU GM Holden Ltd, ABN 84 006 893 232 (hereinafter Holden)

Change of name, address or ownership If you drive a pre-owned Holden, have moved house or changed any of your details, we’d like to hear from you! Holden uses your details to keep your vehicle’s factory provided Roadside Assistance and Warranty details up to date. It also helps us let you know if there is an existing safety recall or rework on your vehicle. To update your details, please take a few minutes to fill in and mail the form at the back of the Service/Warranty booklet or visit Holden’s website at: www.holden.com.au/forms/change-of-owner-details GM Holden Ltd (Holden) is collecting the new owner’s personal information in order to process the request for transfer for the specified vehicle. We may disclose your personal information to our related companies and third parties who provide us with (or help us provide) products and services, including to overseas locations such as the USA, and other countries in Europe, Oceania and Asia. Holden’s privacy policy (available at: www.holden.com.au/privacypolicy) states how you can seek to access or correct any personal information Holden holds about you, how to complain about a privacy breach by Holden and how Holden will deal with a privacy complaint. You can contact Holden on 1800 033 349 or alternatively, you may prefer to email Holden at: [email protected] Note: Please refer to the inside front cover of the Service/Warranty booklet for the Vehicle Identification Certificate.

Printed in Australia © 2016 GM Holden Ltd Part No. 92289327 Reproduction in whole or part is May 2016 prohibited without written approval from (MY17 MP Spark. Print 1) GM Holden Ltd, ABN 84 006 893 232 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Contents Introduction ...... 2 In Brief ...... 5 Keys, Doors, and Windows . . . . . 16 Seats and Restraints ...... 31 Storage ...... 47 Instruments and Controls ...... 50 Lighting ...... 74 Infotainment System ...... 79 Climate Controls ...... 115 Driving and Operating ...... 120 Vehicle Care ...... 147 Service and Maintenance . . . . . 190 Technical Data ...... 192 Customer Information ...... 197 Index ...... 200 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

2 Introduction Introduction Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Introduction 3

Introduction . The table of contents at the Danger, Warning, and beginning of this manual and Your vehicle is a designed within each section shows where Caution combination of advanced the information is located. technology, safety, environmental { Danger friendliness and economy. . The index will enable you to search for specific information. This owner's manual provides you Text marked { Danger provides with all the necessary information to . Directional data, e.g. left or right, information on risk of fatal injury. enable you to drive your vehicle or front or back, always relate to Disregarding this information may safely and efficiently. the direction of travel. endanger life. Make sure your passengers are . Display messages and interior aware of the possible risk of labelling are written in bold accident and injury which may result letters. { Warning from improper use of the vehicle. . For a complete list of the registered trademarks contained { Using this Manual Text marked Warning provides in this manual, see Trademarks information on risk of accident or and License Agreements. . This manual describes all injury. Disregarding this options and features available Trademarks and Licence 0 information may lead to injury. for this model. Certain Agreements 197. descriptions, including those for display and menu functions, may not apply to Caution your vehicle due to model variant, special equipment or Text marked Caution provides accessories. information on possible damage to the vehicle. Disregarding this . The "In brief" section will give information may lead to vehicle you an initial overview. damage. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

4 Introduction 2 NOTES Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

In Brief 5 In Brief Initial Drive Information Initial Drive Information Vehicle unlocking ...... 5 Vehicle unlocking Seat Adjustment ...... 6 Head Restraint Adjustment ...... 7 Safety Belts ...... 7 Mirror Adjustment ...... 7 Steering Wheel Adjustment . . . . . 8 Instrument Panel Overview ...... 9 Exterior Lighting ...... 10 Horn ...... 12 To open the tailgate, push the Windshield Wiper/Washer ...... 12 touchpad switch under the tailgate Climate Controls ...... 13 moulding. Transmission ...... 14 0 Starting the Engine ...... 14 Remote Control 18, Parking ...... 15 Central Locking System 0 20, Press K to unlock the doors and Boot 0 24. tailgate. Open the doors by pulling the handles. The hazard warning flashers will flash twice. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

6 In Brief

Seat Adjustment Seat backrests Seat height Seat positioning

1. Recline the seatback by pulling Pump the lever on the outside of the the lever. seat cushion. 1. Move the seat forwards or 2. Adjust the angle and release backwards by lifting the bar at 1. Push the lever down several the front and sliding the seat. the lever. times to lower the seat cushion. 2. Release the bar to engage the 3. Allow the seat to engage latch. audibly. 2. Pull the lever up several times to raise the seat cushion. Try to move the seat back and Note forth to ensure the seat is Do not lean on the seat when Seat Position 0 32, Seat locked in place. adjusting. Adjustment 0 32. 0 Seat Position 0 32, Seat Seat Position 32, Seat 0 Adjustment 0 32. Adjustment 32. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

In Brief 7

Head Restraint Safety Belts Mirror Adjustment Adjustment Interior Mirror

1. Withdraw the belt from the reel. . Lift the head restraint up to 2. Pull the metal tongue across To reduce headlamp glare from raise. your body into the buckle, until following vehicles, push the lever it clicks into place. . Push the locking button and towards the front of the vehicle. push the head restraint down to 3. Tension the lap belt regularly Manual Rearview Mirror 0 27. lower. while driving by tugging the . Push the locking buttons on shoulder belt. each head restraint post and pull Seat Position 0 32, the head restraint up to remove. Seat Belts 0 35, Airbag System 0 38. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

8 In Brief

Exterior Mirrors

1. To unlock, move the lever down. Select the relevant exterior mirror by 2. Adjust the steering wheel. turning the control left (L) or 3. To lock, move the lever up. right (R). Then swivel the control to adjust the mirror. In position 0 no 4. Ensure the steering wheel is mirror is selected. locked in position before driving. Power Mirrors 0 26. Steering Wheel Adjustment

{ Warning

Do not attempt to adjust the steering wheel while driving. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

In Brief 9

Instrument Panel Overview Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

10 In Brief

1. Side air vents, see Adjustable Headlamp High/Low-Beam Exterior Lighting Air Vents 0 118. Changer 0 74. 2. Front Airbag System 0 39. 13. Light switch, see Exterior Lamp 0 3. Centre air vents, see Controls 74. Adjustable Air Vents 0 118. 14. Traction Control System 0 4. Infotainment system, see (TCS) 135. Introduction 0 79. 15. Bonnet 0 150. 5. Hazard Warning Flashers 0 75. 16. Ignition switch with steering wheel lock, see Ignition 6. Engine start/stop button, see 0 Ignition Positions 0 122. Positions 122. 7. Windscreen wiper, Windscreen 17. Accelerator pedal. washer system, rear wiper, rear 18. Brake pedal. washer system, see Windshield 19. Steering Wheel Turn light switch. Wiper/Washer 0 52. 0 Adjustment 51. 9 : Turns all lamps and lights off. 8. Cruise Control 0 141. 20. Clutch pedal. Note 9. Warning Lights, Gauges, and 21. Power Outlets 0 54. When the engine is running the Indicators, see DRLs will be on. Speedometer 0 55. 22. Shift lever, Manual Transmission 0 132, Automatic ; (Park lamps) : Turns on the 10. Horn 0 51. Transmission 0 127. park lamps, number plate lamps and 0 Airbag System 38. 23. USB/Auxiliary socket. instrument panel lighting. 0 11. Steering Wheel Controls 51. 24. Air Conditioning System 0 115. 2 (Headlamps) : Turns on the headlamps and all park lamps, 12. Turn and lane-change signals, 25. Glove Box 0 47. headlight flash, low beam and when the ignition is turned on. high beam, see Turn and Lane-Change Signals 0 75. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

In Brief 11

# (Front Fog Lamps) : Press to To return to low beam: Turn and Lane-Change 0 turn the fog lamps on or off. An 1. Pull the lever rearwards. Signals 75. indicator light on the instrument Hazard warning flashers cluster comes on when the fog To flash the headlamps: lamps are on. 1. With the headlamps off, pull Exterior Lamp Controls 0 74. the lever rearwards. The lamps stay on for as long as the lever Headlight flash, high beam and is held. low beam Turn and lane-change signals

Press | to turn the hazard warning flasher on or off, when the ignition is in any position. All turn signals flash continuously. Use the hazard warning flasher if To activate high beam: 1. Push the lever in the direction the vehicle becomes a traffic 1. Turn the headlamps on. the steering wheel is turned. hazard, day or night. 2. Push the lever forwards. A green arrow on the Hazard Warning Flashers 0 75. instrument cluster flashes when The high beam indicator the lamps are in operation. lamp 3 illuminates on the instrument cluster. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

12 In Brief

Horn Windshield Wiper/Washer Windscreen washer Windscreen wiper

Press a. Pull the lever towards you to wash the windscreen. 1x : Misting function Washer fluid is sprayed onto the windscreen and the wipers OFF : Off cycle once. INT : Intermittent operation Windshield Wiper/Washer 0 52, LO : Continuous wipe, slow speed Washer Fluid 0 155. HI : Continuous wipe, fast speed Windshield Wiper/Washer 0 52, Wiper Blade Replacement 0 158. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

In Brief 13

Rear window wiper Rear window washer Climate Controls Controls

To operate the rear window wiper, Push the lever forwards. push the switch at the end of the Washer fluid is sprayed onto the lever. rear window and the wiper cycles E : To the instrument panel vents. INT : Intermittent wipes, push in at for a few strokes. the top of the button. ) : To the instrument panel vents Rear Window Wiper/Washer 0 53. and floor vents. OFF : To turn the wipers off, place [ the switch in the OFF position. : To the floor vents. A small amount of air is directed to the ON : Continuous wipes, push in at windscreen, outer instrument panel the bottom of the button. vents and side window demist vents. - : Between the windscreen and floor vents, some to the outer instrument panel vents and side window demist vents. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

14 In Brief

0 : To the windscreen and side Automatic Transmission 0 127. Starting the Engine window demist vents, with a small Manual transmission amount of the air to the outer Check before starting off instrument panel vents. . Tyre pressure and condition. Air Conditioning System 0 115. Tyre Pressure 0 172. . Engine oil level and fluid levels. Transmission Engine Oil 0 153. Automatic transmission . All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational. . Proper position of mirrors, seats, and seat belts. Convex Mirrors 0 26, Seat Position 0 32, Three-Point Seat Belt 0 37. Reverse: with the vehicle stationary, press clutch pedal and engage . Brake function at low speed, the gear. particularly if the brakes are wet. If the gear does not engage, set the lever to neutral, release the clutch pedal and press again; then repeat gear selection. P: Park Manual Transmission 0 132. R: Reverse N: Neutral D: Drive L: Low Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

In Brief 15

Starting the engine . Turn key to position 3 and Starting the Engine 0 123. release. Starting the Vehicles with ignition switch Engine 0 123. Parking Vehicles with electronic key 1. Apply the parking brake firmly system without engaging the release button. 2. Automatic transmission: Select position P. 3. Shut all windows. 4. Turn the ignition off and remove the key. 5. Press Q on the key to lock all doors. . Turn key to position 1. Anti-theft Alarm System 0 25. . Move the steering wheel slightly Control of a Vehicle 0 120. to release the steering . Have the electronic key inside wheel lock. the vehicle. . Press the clutch pedal (manual) . Press the brake pedal. or brake pedal (auto). . Automatic transmission in P Automatic transmission in P . or N. or N. . Do not operate the accelerator Do not operate accelerator . pedal. pedal. . Press the Engine Start/Stop button. . Engine starts after a short delay. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

16 Keys, Doors, and Windows Roof Keys and Locks Keys, Doors, and Sunroof ...... 30 Windows Keys Type 1 Keys and Locks Keys ...... 16 Remote Control ...... 18 Memorised Settings ...... 20 Central Locking System ...... 20 Safety Locks ...... 23 Doors Boot ...... 24 Vehicle Security Anti-theft Alarm System ...... 25 Immobiliser ...... 26 Exterior Mirrors Convex Mirrors ...... 26 Power Mirrors ...... 26 Folding Mirrors ...... 27 Interior Mirrors Manual Rearview Mirror ...... 27 Windows Manual Windows ...... 27 Power Windows ...... 28 Heated Rear Window ...... 29 Sun Visors ...... 29 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Keys, Doors, and Windows 17

Type 2 The key code number is specified Type 2 key on a detachable tag. Type 1 key

The key operates all locks and the Press button on the side of the ignition. transmitter to remove the key blade. . Press Q to lock the doors and 1. Press the button to extend the Do not pull the key out without key blade. the tailgate. pressing the button. 2. To retract the key blade, press About the keys . Press K to unlock the doors and the button and fold the blade the tailgate. into the key. . The remote control has a range of approximately 25 metres. Central Locking System 0 20. The key engages audibly. . The range depends on the Replacement keys charge of the key battery, on If a key is lost, a replacement can ambient conditions, the key's be ordered through any Holden location and the area Dealer by quoting the key code between them. number. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

18 Keys, Doors, and Windows

. Take care that no button is . If the key gets wet, wipe it with a Battery replacement pressed unintentionally, soft cloth. especially when the vehicle is Caution out of sight. Remote Control Avoid touching the flat surfaces of . Protect from moisture and high Remote control battery temperatures. the battery, the circuit board and replacement other components inside the The key buttons may not work if: remote control with bare fingers. . More than 25 metres from the Handling will shorten battery life. vehicle. . Battery voltage is too low. As soon as the range of the remote . The key buttons are operated control reduces, replace the battery. repeatedly while not in range of Type 1 key the vehicle. . The central locking system is operated at frequent intervals. . The power supply is interrupted for a short time. . The vehicle is parked near Batteries do not belong in strong radio activity. household waste. They must be Note disposed of at an appropriate . Avoid dropping the key. recycling collection point. . Do not place heavy objects on the key. . Keep the key away from water Use CR2032 (or equivalent) battery. and direct sunlight. 1. Open the cover. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Keys, Doors, and Windows 19

2. Remove the used battery Note Electronic key system without touching other Take care that no parts fall out. components. 3. Carefully lift the battery up 3. Install the new battery with the using a flat tool. negative side (-) facing down. 4. Remove the battery. 4. Replace the back cover. 5. Insert the new battery, positive 5. Check key operation. side toward the back cover. Type 2 key Replace with a CR2032 or equivalent battery. 6. Replace the back cover. Ensure it clips in place securely. 7. Check key operation. Enables a keyless operation of the following functions: Remote control synchronisation . Central Locking System 0 20. 0 After replacing the battery, unlock . Boot 24. the door with the key in the driver’s . Starting the Engine 0 123. door lock. The remote control will be The electronic key simply needs to synchronised when the ignition is be on the driver’s person. 1. Press button on the side of the switched on. transmitter to remove the key Additionally the electronic key blade. includes the functionality of the remote control. Remote 2. Reinsert the key blade Control 0 18. approximately 5 mm and rotate the key blade to remove the back cover, as shown. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

20 Keys, Doors, and Windows

Handle with care, protect from . Fault in electronic key . infotainment system moisture and high temperatures and . Electronic key out of reception . central locking system avoid unnecessary operation. range . comfort settings Note . Battery voltage too low Do not put the electronic key in the A precondition is that load compartment or in front of the . Overload of the central locking Personalisation by driver is Info-Display. system by operating at frequent activated in the Settings menu in the intervals, the power supply is infotainment system. Replacing battery in electronic key interrupted for a short time This must be set for each key used. Replace the battery as soon as the . Interference from higher-power Vehicle Personalisation 0 70. system no longer operates properly radio waves from other sources or the range is reduced. The need for battery replacement is indicated To rectify the cause of the fault, Central Locking System by a message in the Driver change the position of the electronic key. Doors may be locked and unlocked Information centre. Driver by pushing buttons on: Information Centre (DIC) 0 64. Central Locking System 0 20. . The driver’s door armrest Battery replacement. Remote Starting the vehicle with a low Control 0 18. transmitter battery. Starting the . The key, from inside or outside Engine 0 123. the vehicle Electronic key synchronisation . Front door exterior handles The electronic key synchronises Memorised Settings (vehicles with electronic key itself automatically during every system) starting procedure. Whenever the key is removed from the ignition switch, or for vehicles Note Fault with electronic key system, after the In the event of an accident in which If the central locking cannot be engine start/stop button is pressed airbags or belt pretensioners are operated or the engine cannot be off, the following settings may be deployed, the vehicle is started, the cause may be one of automatically memorised by the key: automatically unlocked. the following: . lighting Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Keys, Doors, and Windows 21

Note Memorised Settings 0 20. Central locking button The driver’s door must be closed for Locking the central locking system to work. Close doors, load compartment and Unlocking fuel filler flap.

Locks or unlocks all doors and the tailgate from the driver’s door. Electronic key system K operation Press . Press Q. The electronic key must be outside All doors unlock. All doors lock. the vehicle, within a range of The hazard lamps flash twice. The hazard lamps flash once. approx. one metre of the relevant door side. The setting can be changed in the If the driver’s door is not closed Vehicle settings menu in the properly, the central locking system infotainment system. will not work. Vehicle Personalisation 0 70. The setting can be saved for the key being used. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

22 Keys, Doors, and Windows

Unlocking Locking If the driver’s door is not closed properly or the electronic key remains in the vehicle, locking will not be permitted and a warning tone sounds three times. If there have been two or more electronic keys in the vehicle and the ignition was on once, the doors will be locked even if just one electronic key is taken out of the vehicle. Unlocking and opening the tailgate Press the button on either front door Press the button on either front door The tailgate and the doors can be handle. The doors and tailgate are handle. The doors and tailgate are unlocked by pressing the button unlocked. locked. under the tailgate moulding when electronic key is in range. The unlocking mode can be set in The system only locks if: the Settings menu in the . it has been more than 5 seconds infotainment system. since unlocking, or 0 Vehicle Personalisation 70. . the unlock button has been The setting can be saved for the pressed twice within electronic key being used. 5 seconds, or Memorised Settings 0 20. . any door has been opened and then all doors are closed. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Keys, Doors, and Windows 23

Fault in remote control system Locking Safety Locks Unlocking 1. Push the central locking button Child Safety Door Locks on the driver’s door armrest. 2. Close the driver’s door and lock from the outside with the key. Insert the key and turn towards the rear of the vehicle. Fault in central locking system Unlocking Manually unlock the driver’s door by turning the key in the lock. The other doors can be opened individually by lifting the locking knob on each window sill. The 1. Insert the key into the driver s ’ tailgate cannot be opened. door by turning the key towards { Warning the front of the vehicle. 2. Switch on the ignition and Use the child locks whenever press the central locking button children are occupying the rear on the driver’s door armrest to seats. unlock all doors and the tailgate. To prevent the rear doors from being opened from the inside, move the lever to the lock position. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

24 Keys, Doors, and Windows

Closing Caution Doors Do not apply excessive force to Boot the inside door handle while the child safety door lock is activated. Tailgate Damage may occur. Opening

To open a rear door when the child security door lock is activated, unlock the door and open the door from the outside. To cancel the child security door lock, move the lever to the unlock position. Use the inside pull handle to lower and close the tailgate. Do not press the touchpad switch while closing the tailgate as it will unlock again. To open the tailgate, with all doors Central Locking System 0 20. unlocked, press the touchpad switch on the underside of the tailgate moulding and lift up. Central Locking System 0 20. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Keys, Doors, and Windows 25 General hints for operating Vehicle Security Status during the first 30 seconds of tailgate anti-theft alarm system activation: Anti-theft Alarm System . LED illuminates: test, arming { Danger delay. It monitors: Do not drive with the tailgate . LED flashes quickly: doors, . doors, tailgate, bonnet tailgate or bonnet not completely open or ajar, e.g. when closed, or system fault. transporting bulky objects. . ignition Dangerous exhaust fumes may Unlocking the vehicle deactivates Deactivation both systems simultaneously. enter the vehicle. To avoid injury Remote control: Unlocking the and/or damage to the vehicle, K before closing the tailgate check vehicle by pressing deactivates the contact area is unobstructed. anti-theft alarm system.

Caution

Before opening the tailgate, check the area above and behind for obstructions, to avoid damage to the tailgate.

Note A status LED is integrated in the Adding heavy accessories to the sensor on top of the instrument tailgate may affect its ability to panel. remain open. Electronic key system: Unlocking the vehicle by pressing the button on a front door handle deactivates the anti-theft system. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

26 Keys, Doors, and Windows The system is not deactivated when The immobiliser prevents Exterior Mirrors unlocking the driver’s door with the unauthorised engine starting. key or with the central locking The immobiliser is activated Convex Mirrors button in the passenger automatically after the key has been compartment. removed from the ignition switch, The shape of the mirror makes Alarm or for vehicles with electronic key objects appear smaller, which will system, after the engine start/stop affect the ability to estimate The alarm can be silenced by button is pressed off. distances. pressing any button on the remote control or by switching on the If control indicator A flashes when Power Mirrors ignition. the ignition is on, there is a fault in The anti-theft alarm system can be the system; the engine cannot be K started. Switch off the ignition and deactivated by pressing or then repeat the start attempt. switching on the ignition. If control indicator A continues Immobiliser flashing, attempt to start the engine using the spare key and seek the assistance of a Holden dealer. Note The immobiliser does not lock the doors. You should always lock the vehicle after leaving it and switch on the anti-theft alarm system. Central Select the relevant exterior mirror by Locking System 0 20, Anti-theft turning the control left (L) or Alarm System 0 25. right (R). Then swivel the control to Immobiliser Light 0 63. adjust the mirror. In position 0 no mirror is selected. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Keys, Doors, and Windows 27 Folding Mirrors Interior Mirrors Windows Manual Rearview Mirror Manual Windows

When the vehicle is parked, the mirrors may be folded flat against the side of the vehicle. To reduce headlamp glare from The vehicle may have manual rear following vehicles, push the lever door windows. { Warning towards the front of the vehicle. Windows can be opened or closed Always extend mirrors outwards Note by turning the window winders. when driving to increase visibility. The rear view clarity is reduced Do not drive while either exterior when the mirror is set to the mirror is folded against the anti-glare position. vehicle. Return the lever back to its original position as soon as the glare has disappeared. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

28 Keys, Doors, and Windows

Power Windows Operation Safety function Push and hold or pull and hold the If the window glass encounters { Warning required button to raise or lower a resistance above the halfway point window. of the operating range during Before operating the power The window stops moving as soon automatic closing, it is immediately windows, check they are free of as the button is released. stopped and opened again. obstructions and that passengers and pets are not in the proximity Auto up/down Overload of the moving window. The vehicle may have an auto up/ If the windows are repeatedly down function. operated at short intervals, window operation may be disabled for To fully open the driver’s door some time. window automatically, press the switch fully down. To fully close the Initialising the power windows window automatically, pull the If the windows cannot be closed switch fully up. In automatic automatically (e.g. after operation, the window will fully open disconnecting the vehicle battery), or close even if you let go of the activate the window electronics as switch. follows: To stop the window at the desired 1. Close doors. position while the window is in operation, pull up or press down 2. Switch on ignition. and release the switch to the 3. Close the window completely The power windows can be opposite direction of the movement. and keep the switch pulled for operated when the ignition is on. an additional 2 seconds. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Keys, Doors, and Windows 29

Child safety system for rear Heated Rear Window Sun Visors windows The sun visors may be folded down or folded outwards over the side window to prevent glare. . The sun visors may have mirrors. . Close the mirror cover when driving.

{ Warning

Do not place the sun visor in such a position that it reduces visibility 1. Start the engine. of the roadway, traffic or other objects. Press switch v to deactivate rear 2. Press +. power windows. The heating is switched off To activate press v again. automatically after a few minutes or by pressing the button again. { Warning

Do not leave keys or children unattended in the vehicle. Children may operate the switches and become trapped in the windows. Serious injury or death may occur from misuse of power windows. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

30 Keys, Doors, and Windows Roof Note If the outside surface of the sunroof is wet, tilt the roof first to allow the Sunroof water to run off and then open sunroof. { Warning Do not affix any stickers to sunroof. Take care when operating the Sunblind sunroof. Risk of injury, particularly to children. The sunblind is manually operated. Keep a close eye on the movable Close or open the sunblind by parts when operating them. sliding. Ensure that nothing becomes Raise When the sunroof is opened, the sunblind also opens. trapped in them as they move. Hold switch 1 pressed until the sunroof is raised at the rear. The sunroof can be operated with Open ignition on. From raised position, press and release switch 1: the sunroof is opened automatically to the end position. To stop movement before end position, operate the switch once more. Close Hold switch 2 pressed from any position until sunroof is closed completely. Releasing the switch stops movement in any position. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 31 Seats and Head Restraints Height adjustment Front head restraints Restraints { Warning

This safety feature is not intended Head Restraints as a headrest. It is solely for the Head Restraints ...... 31 reduction of whiplash neck Front Seats movement in an accident Seat Position ...... 32 involving your vehicle. Seat Adjustment ...... 32 The centre of the head restraint Rear Seats should be at eye level, never at Rear Seats ...... 34 neck level. Seat Belts Seat Belts ...... 35 Three-Point Seat Belt ...... 37 . Lift the head restraint up to raise. Airbag System . Push the locking button and Airbag System ...... 38 push the head restraint down to Front Airbag System ...... 39 lower. Side Airbag System ...... 40 Curtain Airbag System ...... 41 . Push the locking buttons on each head restraint post and pull Child Restraints the head restraint up to remove. Child Restraint Systems ...... 43 Where to Put the Restraint . . . . . 44 ISOFIX Child Restraint Systems ...... 45 Top-Tether Child Restraint Systems ...... 45 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

32 Seats and Restraints Rear head restraints Front Seats . Adjust the seat so that your legs are slightly angled when against Seat Position the pedals. . Adjust the backrest angle to easily reach the steering wheel { Warning with arms slightly bent. Steering 0 To avoid reducing the Wheel Adjustment 51. effectiveness of seat belts, . Maintain contact between seatbacks should only be upright shoulders and the backrest or at most semi-reclined when the when turning the steering wheel. vehicle is moving. . Adjust the head restraint. Head Restraints 0 31. . Slide the passenger seat as far . Lift the head restraint up to back as possible. raise. . Push the locking button and Seat Adjustment push the head restraint down to lower. { Danger . Push the locking buttons on each head restraint post and pull Do not sit nearer than 25 cm from the head restraint up to remove. the steering wheel, to allow safe airbag deployment.

. Sit centrally in the seat. . Use the backrest and cushion for support. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 33

Try to move the seat back and Seat height { Warning forth to ensure the seat is locked in place. Do not adjust the driver's seat when the vehicle is moving as the Seat backrests seat could move suddenly causing the driver to lose control.

Seat positioning

Pump the lever on the outside of the seat cushion. 1. Push the lever down several 1. Recline the seatback by pulling times to lower the seat the lever. cushion. 2. Adjust the angle and release 2. Pull the lever up several times the lever. to raise the seat cushion. 1. Move the seat forwards or 3. Allow the seat to engage backwards by lifting the bar at audibly. the front and sliding the seat. Note 2. Release the bar to engage the Do not lean on the seat when latch. adjusting. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

34 Seats and Restraints Rear Seats To fold the rear seatbacks down separately: Folding down rear seatbacks 1. Slide the front seat forwards. 2. Adjust the front seatback to an { Danger upright position. Ensure the rear seatbacks are 3. Remove the rear seat head securely in place. restraints. Do not pull the release button on Head Restraints 0 31. the top of the seat back while the vehicle is moving. This could cause damage or injuries to the 6. Pull the release knob on top of occupants. the rear seatback upwards. Do not allow passengers to sit on the folded seatbacks while the vehicle is in motion. Unrestrained luggage or passengers on a folded seatback could be thrown within or ejected from the vehicle in a sudden stop or accident.

4. Pull up the front of the rear Caution seat cushion to release it. 5. Guide the rear of the rear seat Do not trap the seat belt when cushion to an upright position. returning the seatback to the 7. Fold the rear seatback upright position. forwards and down. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 35 8. Insert the rear seat head 2. Make sure the seatbelts are Seat Belts restraints into the pockets. not pinched by the latch, push the seat back firmly back into place and pull the seat belt out of the guides. 3. Place the rear part of the seat cushion in its original position. Note Make sure the seat belts are not twisted or caught under the seat cushion. 4. Push the front part of the seat cushion down firmly until it latches. 9. Put the seatbelts for the { Warning outboard seats into the belt guides. Seat belts are designed to bear upon the bony structure of the 10. Adjust the front seats to the desired position. body, and should be worn low across the front of the pelvis or To return the seatback to the upright the pelvis, chest and shoulders, position: as applicable; wearing the lap 1. Lift the seatback upwards and section of the belt across the reinstall the rear head abdominal area must be avoided. restraints. (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

36 Seats and Restraints

In the event of a front, side or rear Warning (Continued) Warning (Continued) collision of a certain severity, the driver’s and/or passengers’ seat Seat belts should be adjusted as or prevent the seat belt assembly belts are tightened. firmly as possible, consistent with from being adjusted to remove comfort, to provide the protection slack. { Warning for which they have been The belts lock during heavy designed. A slack belt will greatly acceleration or deceleration for Incorrect handling (e.g. removal reduce the protection afforded to the safety of the occupants. or fitting of belts or belt buckles) the wearer. can trigger the belt tensioners, causing a risk of injury. Care should be taken to avoid Belt force limiters contamination of the webbing with polishes, oils and chemicals, and In the front seats, stress on the When the belt tensioners have been particularly battery acid. body is reduced by the gradual release of the belt during a collision. deployed, 9 illuminates on the Belts should not be worn with instrument cluster. Safety Belt straps twisted. Belt tensioners Reminders 0 59. Each belt assembly must only be Triggered belt tensioners must be used by one occupant. It is replaced. dangerous to put a belt around a Belt tensioners are only child being carried on the triggered once. occupant's lap. No modifications or additions { Warning should be made by the user which will either prevent the seat Do not attach or install objects belt adjusting devices from that may interfere with the operating to remove slack, operation of the belt tensioners. (Continued) (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 37

Removing Warning (Continued)

Do not make any modifications to belt tensioner components.

Three-Point Seat Belt Fitting

2. Pull the metal tongue across your body into the buckle, until it clicks into place. 1. Press the release button on the 3. Tension the lap belt regularly buckle. while driving by tugging the 2. Allow the belt to retract. shoulder belt. 3. Check that it fully retracts Do not place objects such as without twisting or turning. handbags or mobile phones between the belt and your body. Seat belt use during pregnancy The belt should not be twisted. It should lie flat and fit firmly across { Warning your hips. { Warning The belt must not rest against 1. Withdraw the belt from the reel. hard or fragile objects in the The lap belt must be positioned pockets of your clothing. as low as possible across the pelvis to prevent pressure on the abdomen. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

38 Seats and Restraints Seat belts work for everyone, Replacing seat belts after a Airbag System including pregnant women. Like all crash occupants, they are more likely to When triggered, airbags inflate within milliseconds. They also be seriously injured if they do not { Warning wear a seat belt. deflate so quickly that it is often unnoticeable during the collision. A pregnant woman should wear a It is essential to replace the entire three point belt with the lap portion assembly after it has been worn of the belt worn as low as possible in a severe impact even if { Danger below the rounding of their stomach, damage to the assembly is not Do not make any modifications to throughout the pregnancy. obvious. the airbag system. Seat belt care The driver should sit back as far as possible while still maintaining { Warning control of the vehicle. Sitting too close to the airbag can cause Care should be taken to avoid death or serious injury when it contamination of the webbing with inflates. polishes, oils and chemicals, and particularly battery acid. Always wear a seat belt. Cleaning may safely be carried out using mild soap and water. The belt should be replaced if { Warning webbing becomes frayed, WARNING – EXTREME contaminated or damaged. HAZARD! (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 39

Front Airbag System Warning (Continued) { Warning

Do not use a rearward facing Airbags are part of the child restraint on a seat protected supplemental restraint system by an airbag in front of it! (SRS) as they assist, but do not The child could be seriously replace seat belts. Airbags do not injured if the airbag inflates, as deploy in every accident. Various the child's head would be very factors dictate whether they close to the inflating airbag. deploy including speed, angle of collision and object hit. Airbags Remember that it is safest for are not designed to inflate if the children to be seated in the rear vehicle is hit from the rear or is seats. involved in a rollover. Seat belts must be worn by all passengers whenever the vehicle is moving. The front airbag system consists of one airbag in the steering wheel and Airbags inflate with great force. one in the instrument panel on the If you are too close to an inflating passenger side. These are identified airbag it may cause injury. by the word AIRBAG. Seat belts help keep you in position for airbag inflation in the event of a collision. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

40 Seats and Restraints

designed to inflate if the vehicle is { Warning struck from the side, rear or in rollovers. Always wear a seat belt. Do not place any objects on or over the instrument panel or Side Airbag System between an airbag and yourself. Do not hang anything from the sun visor or mirror. Passengers must not rest their feet on the instrument panel.

{ Warning

The horn pad must not be covered with adhesive or any other material. The driver should adjust the seat Side airbags are stored in the sides as far rearward as possible while of the front seats. still maintaining control of the vehicle. They can be identified by the word AIRBAG.

Front airbags will inflate in certain severe frontal or near frontal impacts. Front airbags are not Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 41

The risk of injury to the upper body Curtain Airbag System and pelvis in the event of a side impact is considerably reduced.

{ Warning

Do not fit unauthorised seat covers as they may impair the deployment of the side airbags. Do not position your body or any object (including pillows) between front seats and doors. The side airbags deploy in most, but not all, severe side impacts. Do not lean on, or sleep against, the door. Always sit centrally in the seat. Curtain airbags are stored in the roof on each side of the vehicle. Always wear a seat belt. They can be identified by the word AIRBAG on the door pillars. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

42 Seats and Restraints

The risk of injury to the head in the Replacing airbag system parts event of a side impact is after a crash considerably reduced. Note After an accident where airbags { Warning have deployed, the systems, associated parts and hardware must Do not position your body or any be checked and replaced as object (including pillows) in the required. area in which the airbag inflates. Seats, associated parts and There must be no objects in the hardware must also be checked and area in which the airbag inflates. replaced as required. Refer to the illustration. The curtain airbags deploy in most, The airbag system should also be but not all severe side impacts. Use the hooks above the doors inspected after an accident if: only to hang up light articles of . The instrument panel area or clothing. steering wheel is scratched, Do not place any objects in the cracked or damaged. pockets of the hanging items. . The front seats and upholstery Do not hold onto the assist grips are damaged. (above the doors) while seated in . The headliner or trim panels are the vehicle. damaged. Do not lean on, or sleep against It is recommended that this work be the front or rear doors. Always sit carried out by a Holden Dealer or centrally in the seat. approved repairer. Always wear a seat belt. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 43

Child Restraints Warning (Continued) Child Restraint Systems Holden strongly recommends that you refer to your specific State or { Warning Territory regulations to determine which child restraint and seat WARNING – EXTREME location is suitable for your child. HAZARD! Do not use a rearward facing child restraint on a seat protected { Warning by an airbag in front of it! Always ensure that the seat belt The child could be seriously { Warning fits firmly around the child injured if the airbag inflates, as restraint, as applicable to the type the child's head would be very This manual provides you with of restraint used. close to the inflating airbag. general information concerning child restraints only. If a child cannot see out of the Remember that it is safest for window, do not raise him/her by children to be seated in the rear The driver is required by law to means of an ordinary cushion. seats. ensure that passengers are It will not stay in place in a suitably restrained. In most States collision and the child can slip out and Territories of Australia and of the straps and become New Zealand, specific laws may entangled. exist which require children to be seated in approved child restraints and/or in certain locations within the vehicle. (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

44 Seats and Restraints

Selecting the right system . The lap belt rests low and snug across the hips, not across the Warning (Continued) Infants stomach. purchase a child restraint which Rearward facing infant capsules are . The sash belt is centred on the carries the appropriate Standards designed so that in the event of a shoulder and chest. collision, impact forces will be Australia sticker of approval. evenly spread over the baby's back, . They are able to stay seated like Australian States and Territories with minimal jarring to the this for the entire trip. and New Zealand have laws vulnerable head and neck area. restricting the seating of children Where to Put the Young children in the front passenger seat. In Restraint most jurisdictions, children under Forward facing child seats are for 4 years should not be seated in use when the child is able to sit and the front passenger seat. Check easily hold their head upright. { Warning your local road safety regulations Booster seats It is safest for children to be before seating a child in the seated in the rear seat. Booster seats are for when children front seat. outgrow a typical forward facing Only child restraints that have Where legally allowable, you may child seat, but are still too small for clips to attach to the vehicle's install a forward-facing child three point seat belts. anchorage fitting (as shown in the restraint in the front seat, but following illustrations) are to be Older children always move the passenger seat used. Earlier types of child as far back as it will go. A child should use a normal three restraints may not attach securely Child restraint anchorages are point seat belt only when: to this type of anchor. designed to withstand only those . They can sit against the back of Use only Standards Australia and loads imposed by correctly fitted the rear seat with knees bent New Zealand approved child child restraints. Under no comfortably at the edge of restraints and harnesses. Only circumstances are they to be the seat. (Continued) (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Seats and Restraints 45

Fasten vehicle-approved ISOFIX Top-Tether Child Warning (Continued) child restraint systems to the ISOFIX mounting brackets. Restraint Systems used for adult seat belts, harnesses, or for attaching other Note items or equipment to the vehicle. Ensure that seat belt buckles are placed out of the way of the child seat. Note If unsure about installing a child ISOFIX mounting brackets are restraint, contact an approved indicated by a label on the restraint fitting station or a Holden seatback, as shown. In addition to Dealer. the ISOFIX mounting, fasten the top-tether straps to the top-tether ISOFIX Child Restraint anchorage points. Systems Top-Tether Child Restraint Systems 0 45. The child restraint tether anchors are located on the backside of the rear seats and the centre of the rear end panel at the load compartment area. Note Use the child restraint anchors for their designed purpose only. Child restraint installation The vehicle has been designed to accommodate child restraints on the rear seat. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

46 Seats and Restraints

When using a child restraint, read the installation instructions supplied with the child restraint and follow the directions for fitment carefully. Secure the child in the restraint in accordance with the manufacturer's instructions. If unsure about installing a child restraint anchor fitting, contact an approved restraint fitting station or a Holden Dealer. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Storage 47 Storage Storage Glove Box Compartments Storage Compartments Instrument Panel Storage ...... 47 Instrument Panel Storage Glove Box ...... 47 Cupholders ...... 48 Luggage/Load Locations Boot ...... 48 Information on Loading the Vehicle Information on Loading the Vehicle ...... 48 The glovebox is located in the instrument panel, in front of the passenger's seat. To open, pull the handle towards The instrument panel storage you. To close, push the lid firmly compartment is located in front of back into place. the shift lever. { Warning

To reduce the risk of injury, always keep the glovebox door closed when driving. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

48 Storage Cupholders Luggage/Load Information on Locations Loading the Vehicle The rear parcel tray can be raised to Boot provide access to the load compartment. { Danger Note Do not stack objects higher than Ensure the parcel tray is lowered the front seats. before closing the tailgate. Do not allow passengers to sit on To remove the parcel tray, unclip each side, move the tray forward the folded seatbacks while the and turn one side rearward to vehicle is in motion. Serious remove. injuries or death can result. Cup holders are located in the . Place all heavy objects in the centre console. load compartment as far forward For folding down rear seatbacks. as possible. Rear Seats 0 34. { Warning . Secure objects to prevent them from sliding. To avoid scalding, never place hot drinks in the cupholders. Movement of heavy objects in the load compartment may Do not place uncovered change the handling of the containers of liquid in the vehicle. cupholder while the vehicle is in . Ensure the backrests are motion. securely engaged. . Ensure that all cargo is lower than the rear seat backrests. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Storage 49

. Place heavier objects at the bottom. . Do not place any objects on the load compartment cover or the instrument panel. . Do not place unsecured objects in the interior. . Do not drive with an open tailgate. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

50 Instruments and Controls

Service Vehicle Soon Light . . . . 60 Information Displays Instruments and Brake and Clutch System Driver Information Controls Warning Light ...... 60 Centre (DIC) ...... 64 Antilock Brake System (ABS) Warning Light ...... 61 Vehicle Messages Controls Operate Pedal Light ...... 61 Vehicle Messages ...... 65 Warning Chimes ...... 67 Steering Wheel Adjustment . . . . 51 Upshift light ...... 61 Steering Wheel Controls ...... 51 Variable Effort Steering Trip Computer Light ...... 61 Horn ...... 51 Trip Computer ...... 68 Windshield Wiper/Washer ...... 52 Ultrasonic Parking Sensor Rear Window Wiper/Washer . . . 53 Light ...... 61 Vehicle Personalisation Outside Temperature ...... 54 Electronic Stability Control Vehicle Personalisation ...... 70 Clock ...... 54 (ESC) Indicator Light ...... 62 Power Outlets ...... 54 Electronic Stability Control (ESC) Off Light ...... 62 Warning Lights, Gauges, and Traction Control System (TCS) Indicators Off Light ...... 62 Speedometer ...... 55 Engine Coolant Temperature Odometer ...... 55 Warning Light ...... 62 Trip Odometer ...... 55 Engine Oil Pressure Light ...... 62 Tachometer ...... 56 Low Fuel Warning Light ...... 63 Fuel Gauge ...... 56 Immobiliser Light ...... 63 Control Indicators ...... 56 Reduced Engine Power Service Display ...... 58 Light ...... 63 Transmission Display ...... 59 High-Beam On Light ...... 63 Turn Signal ...... 59 Front Fog Lamp Light ...... 63 Safety Belt Reminders ...... 59 Tail Lamp Indicator Light ...... 63 Airbag and Seat Belt Tensioner Cruise Control Light ...... 64 Light ...... 60 Bonnet Open Warning Light . . . 64 Charging System Light ...... 60 Door Ajar Light ...... 64 Malfunction Indicator Lamp . . . . 60 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 51 Controls 4. Ensure the steering wheel is Horn locked in position before Steering Wheel driving. Adjustment Steering Wheel Controls

{ Warning

Do not attempt to adjust the steering wheel while driving.

Press a.

The infotainment system and the cruise control may be operated by the controls on the steering wheel. See Infotainment system. Introduction 0 79. 1. To unlock, move the Cruise Control 0 141. lever down. 2. Adjust the steering wheel. 3. To lock, move the lever up. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

52 Instruments and Controls

Windshield Wiper/Washer OFF : Off During intermittent operation, adjust the wiper interval: Windscreen wiper INT : Intermittent operation LO : Continuous wipe, slow speed . For frequent intervals, rotate the wheel downwards. HI : Continuous wipe, fast speed . For longer intervals, rotate the Misting function wheel upwards. To operate the windscreen wipers Windscreen washer once during light rain or mist: . Lightly lift the windscreen wiper/ washer lever up and release. . The lever returns to its usual position when released. . The wipers cycle once.

To operate the windscreen wipers, Adjustable wiper interval turn the ignition on and move the windscreen wiper/washer lever up or down to the desired position.

Caution Pull the lever rearwards to wash the windscreen. Do not operate the wipers on dry glass or when covered with snow Washer fluid is sprayed onto the or ice, as this will damage the windscreen and the wipers rubber and scratch the glass. cycle once.

1x : Misting function Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 53

Rear Window Wiper/ Caution Caution Washer Do not operate the windscreen Do not operate the wipers on dry washer for more than a few glass or when covered with snow seconds or when the washer fluid or ice, as this will damage the reservoir is empty. rubber and scratch the glass. Do not operate the windscreen washer for more than a few { Warning seconds, or when the washer fluid reservoir is empty. Do not spray washer fluid on the windscreen in freezing weather.

To operate the rear window wiper, push the switch at the end of the lever. INT : Intermittent wipes, push in at the top of the button. OFF : To turn the wipers off, place the switch in the OFF position. ON : Continuous wipes, push in at the bottom of the button. Push the lever forwards. Washer fluid is sprayed onto the rear window and the wiper cycles for a few strokes. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

54 Instruments and Controls

Outside Temperature Clock Power Outlets

The outside temperature is shown in Time and date are shown on the The power outlet is located in the the infotainment display when the infotainment display. front console. ignition is on. Adjust the settings for the time in The 12V outlet operates when the the settings menu. ignition is turned to the ON position. See Infotainment system. . The power outlet does not Settings 0 106. operate if the battery voltage is low. . Do not exceed the maximum power consumption of 120 watts. . Do not connect electrical charging devices or batteries. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 55 Warning Lights, Odometer Trip Odometer Gauges, and Indicators Speedometer

Shows distance travelled in The top line displays the recorded kilometres. distance since the last reset. To reset, press SET/CLR on the turn signal lever for a few seconds. Driver Information Centre Shows vehicle speed in kilometres (DIC) 0 64. per hour (km/h). The pointer may shake slightly after the engine is turned off. This is not a malfunction but normal operation to ensure correct pointer position. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

56 Instruments and Controls

Tachometer Fuel Gauge Control Indicators The vehicle may have the following indicators. Indicators illuminate for a short time when the ignition is turned on to show that the light is working. Red: danger, important reminder Yellow: warning, information, fault Green: confirmation of activation Blue: confirmation of activation Note Depending on vehicle variant, the Shows engine speed in thousands Shows the level of fuel in the tank instrument cluster appearance may of revolutions per minute (RPM). (E = empty, F = full). differ. Drive at a low engine speed/range Movement of the fuel within the fuel for each gear, as much as possible. tank may cause the fuel gauge The pointer may shake slightly after indicator to move when braking, the engine is turned off. This is not accelerating or turning. a malfunction but normal operation to ensure correct pointer position. { Danger Before refuelling, stop the vehicle { Warning and switch the engine off. Do not allow the needle to remain in the warning/red zone. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 57

Control indicators in the instrument cluster Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

58 Instruments and Controls

Control indicators in the $: Brake and Clutch System #: Front Fog Lamp Light 0 63. overhead console 0 Warning Light 60. ;: Tail Lamp Indicator Light 0 63. ! : Antilock Brake System (ABS) 5: Cruise Control Light 0 64. Warning Light 0 61. i * 0 : Bonnet Open Warning : Upshift light 61. Light 0 64. m : Variable Effort Steering U: Door Ajar Light 0 64. Light 0 61. #: Operate Pedal Light 0 61. X: Ultrasonic Parking Sensor 0 Light 61. Service Display d: Electronic Stability Control (ESC) Indicator Light 0 62. Engine oil life system g: Electronic Stability Control (ESC) The engine oil life system lets you Off Light 0 62. know when to change the engine oil and filter. Based on driving The front passenger’s seat belt i: Traction Control System (TCS) conditions, the interval at which an reminder displays (if occupied). Off Light 0 62. engine oil and filter change will be Overview C: Engine Coolant Temperature indicated can vary considerably. 0 G: Turn Signal 0 59. Warning Light 62. >: Safety Belt Reminders 0 59. :: Engine Oil Pressure Light 0 62. : Airbag and Seat Belt Tensioner 9 0 Light 0 60. .: Low Fuel Warning Light 63. 0 ": Charging System Light 0 60. A: Immobiliser Light 63. *: Malfunction Indicator w: Reduced Engine Power 0 Lamp 0 60. Light 63. 0 B: Service Vehicle Soon $: High-Beam On Light 63. Light 0 60. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 59

Driver Information Centre . G also flashes when the 0 (DIC) 64. hazard warning is activated. 0 Service Information 190. . The turn signal will self-cancel from larger turns. Transmission Display . If G flashes quickly. Bulb Replacement 0 158. Fuses 0 166. Turn and Lane-Change Signals 0 75.

To display the remaining engine oil Safety Belt Reminders life duration: > : Driver’s seat belt reminder C : Front passenger’s seat belt reminder (if occupied) q > > > r : Rear seat belt reminders illuminate in the Driver Indicates the selected gear or Information Centre (DIC) transmission mode. When the ignition is turned to the Turn Signal ON position: . Push the lever in the same > or C illuminates until the seat direction the steering wheel is belt is fastened. turned. When the engine is running: . G flashes. > or C flashes for 100 seconds Press MENU on the turn signal then illuminates until the seat belt is lever. fastened. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

60 Instruments and Controls

Rear seat belt reminders: Malfunction { Warning . Illuminate, except for any rear Indicator Lamp seat belts which are already Have any fault in the airbag or * fastened. belt tensioner system repaired If the warning light illuminates while driving, there is a problem with . Will turn off after a short period immediately by a Holden Dealer. the emission monitoring system. once you drive above Contact a Holden Dealer. approximately 10 km/h. Airbag System 0 38. . Will turn off immediately when Seat Belts 0 35. Service Vehicle Soon the corresponding rear seat belt Light is fastened. Charging System Light . Will flash and a chime will sound The B light illuminates when the if a rear seat belt is unfastened The " warning light illuminates for vehicle requires a service. a short time when the ignition is while driving above Have the vehicle checked by a turned on to show that the light is approximately 10 km/h. Holden Dealer. working. Vehicle Messages 0 65. Airbag and Seat Belt If the " warning light illuminates Tensioner Light while the engine is running, there is Brake and Clutch System a problem with the charging system: The 9 warning light illuminates for a Warning Light short time when the ignition is 1. Stop and switch off the engine. The $ warning light illuminates for turned on to show that the light is 2. Contact a Holden Dealer. working. a short time when the ignition is turned on to show that the light is If the 9 warning light does not working. illuminate, does not extinguish after few seconds or illuminates while driving, there is a problem with the airbag or belt tensioner system. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 61

If the $ warning light does not Antilock Brake System Variable Effort Steering extinguish or illuminates while (ABS) Warning Light Light driving and the park brake is released, there is a problem with the The ! warning light illuminates for The vehicle has electric power brakes: a short time when the ignition is steering. . Stop the vehicle as soon as it is turned on to show that the light is The m warning light illuminates for safe to do so. working. a short time when the ignition is . Check the brake fluid level. If the ! warning light illuminates, turned on to show that the light is Brake Fluid 0 156, Parking there is a problem in the ABS. working. 0 Brake 134. Note If the m warning light does not . Do not proceed until satisfied The vehicle’s brake system remains extinguish after a few seconds, or if that braking is possible or that operational but without ABS it illuminates while driving, there is a the cause of the problem has assistance. Antilock Brake System fault in the power steering. 0 been repaired. (ABS) 133. Contact a Holden Dealer. . If necessary contact a Holden Contact a Holden Dealer. Dealer. Ultrasonic Parking Operate Pedal Light Sensor Light { Warning # illuminates or flashes yellow. X illuminates for a short time Do not drive while the brake Operate the clutch pedal (manual) when the ignition is turned on to system warning light is on. or brake pedal (auto) to start the show that the light is working. engine. If the light does not extinguish or if it illuminates when reverse gear is Upshift light selected: * illuminates to indicate when to . The sensors may be dirty shift to the next higher gear for best . The sensors may be covered by fuel economy. ice or snow Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

62 Instruments and Controls

. There may be ultrasonic wave g illuminates when the ESC is If you have been operating your interference deactivated. vehicle under normal driving If the light does not extinguish, conditions, you should pull off the Electronic Stability Control road, stop your vehicle and let the contact a Holden Dealer. Parking (ESC) 0 136. Assist 0 137. engine idle for a few minutes. Traction Control System If the light does not go out, you Electronic Stability (TCS) Off Light should switch the engine off and Control (ESC) Indicator consult a dealer as soon as The i indicator light illuminates for possible. We recommend that you Light consult a Holden dealer. a short time when the ignition is The d indicator light illuminates for turned on to show that the light is a short time when the ignition is working. Engine Oil Pressure Light turned on to show that the light is i illuminates when the TC is The : warning light illuminates for working. deactivated. a short time when the ignition is If the light flashes while driving, the turned on to show that the light is ESC is actively helping the vehicle Engine Coolant working. with road grip and stability. Temperature Warning If the : warning light illuminates If the light illuminates or does not Light while the engine is running, the extinguish while driving, contact a engine oil pressure or level is low: Holden Dealer immediately. The C warning light illuminates for a short time when the ignition is . Stop the vehicle as soon as it is Electronic Stability turned on to show the light is safe to do so. Control (ESC) Off Light working. . Turn the ignition off and remove C illuminates red if the coolant has the key. The g indicator light illuminates for overheated. . Check the engine oil level. a short time when the ignition is Engine Oil 0 153. turned on to show that the light is working. . If necessary, contact a Holden Dealer. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 63

Immobiliser Light The vehicle may be driven at a Caution reduced speed. The indicator light illuminates for a Engine damage may result if you short time when the ignition is 3. Contact a Holden Dealer keep driving. Do not run the turned on to show that the light is immediately. engine. If the oil level is normal, working. have the system checked by the High-Beam On Light nearest Holden Dealer. The A indicator light illuminates when there is a fault in the The $ indicator light illuminates immobiliser system. when headlamp high beam is on. Low Fuel Warning Light The engine may not be started. Headlamp High/Low-Beam Changer 0 74. The indicator light illuminates for a Contact a Holden Dealer. short time when the ignition is turned on to show that the light is Reduced Engine Power Front Fog Lamp Light working. Light The vehicle may have front fog The . indicator light illuminates lamps. when the fuel level is low. The w warning light illuminates for # illuminates when the front fog a short time when the ignition is lamps are on. turned on to show the light is Caution 0 working. Front Fog Lamps 76. To avoid damage to the catalytic The engine may not be started. converter, fill the fuel tank above Tail Lamp Indicator Light If w illuminates while driving, the the low fuel level. The ; indicator light illuminates engine s power is reduced. ’ when the tail lamps are on. 1. Stop the vehicle as soon as it Catalytic Converter 0 127. Exterior Lamp Controls 0 74. is safe to do so. 2. Switch the ignition off, then restart after 10 seconds. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

64 Instruments and Controls Cruise Control Light Information Displays . Engine oil life The I indicator light illuminates Engine oil life system white when the system is on and Driver Information green when cruise control is Centre (DIC) activated. Cruise Control 0 141. Bonnet Open Warning Light i illuminates when the bonnet is open. Door Ajar Light The indicator light illuminates for a short time when the ignition is turned on to show that the light is working. The Driver Information Centre (DIC) is located in the instrument cluster. The U warning light illuminates The DIC displays functions such as when any of the doors or the the trip computer, information and tailgate is not completely closed. warning messages and settings, etc. Settings Menu To select the settings menu, press MENU on the turn signal lever. The following options may be available for selection Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 65 Displays an estimate of the 2. Press the MENU button on the Vehicle Messages remaining useful oil life. This may turn signal lever to select the only be displayed while the vehicle Engine oil life display in the Messages are indicated mainly in is stationary. Driver Information the Driver Information Centre (DIC), in some cases together with a If the number 98 is displayed, it Centre (DIC). warning and signal buzzer. means 98% of the current oil life 3. Press the SET/CLR button to remains. reset the oil life to 100%. Press SET/CLR, MENU or turn the adjuster wheel to confirm a When the remaining oil life is low, 4. Turn the ignition Off. message. the vehicle message Code 82 or Take care not to reset the display Note Change : % (oil change) will be accidentally at any time other than displayed. after the oil is changed. Not all of the following messages will be applicable to your vehicle. The engine oil should be changed If the vehicle message code 82 as soon as possible. (Change engine oil soon) comes After an engine oil change, the back on when the vehicle is started, engine oil life system will be reset the engine oil life system has not by your Holden Dealer. reset. Repeat the procedure. 0 How to Reset the Engine Oil Service Information 190. Life System Reset the system whenever the engine oil is changed so the system can calculate the next engine oil change. 1. Turn the ignition On with the engine not running. The vehicle messages are displayed as code numbers. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

66 Instruments and Controls

No. Vehicle message No. Vehicle message No. Vehicle message 2 No remote detected. Press 22 Check right position lamp 66 Service theft alarm clutch to restart 23 Reverse lamp failure 67 Service steering 3 Coolant level low. Add 24 Number plate light failure column lock coolant 25 Check left front turn 68 Service power steering, 4 A/C Off due to high signal lamp Drive with care engine temp 26 Left rear turn indicator 75 Service AC system 5 Steering column is locked failure 76 Service Side Detection 6 Press brake to release park 27 Check right front turn System brake signal lamp 77 Service lane departure 7 Turn steering wheel. Turn 28 Check right rear turn warning / Service front key Off, then On signal lamp camera 8 Turn key Off, Then On – 35 Replace Battery In 79 Engine oil low – add oil repeat breath test Remote Key 81 Service transmission 9 Turn steering wheel. Start 36 Stabilitrak initialising 82 Change engine oil soon vehicle again 48 Side Detection System 84 Engine power is reduced 11 Brakes worn temporarily unavailable 88 Use transmitter pocket to 13 Compressor overheated 49 Lane departure warning start 15 Check high mounted unavailable 89 Service vehicle soon brake lamp- 52 Change timing belt 91 No remote detected 16 Check brake lamps 53 Tighten petrol cap 92 No remote detected. Press 18 Left low beam failure 59 Open, then close driver brake to restart 20 Check right low beam lamp window 21 Check left position lamp 65 Theft Attempted Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 67

No. Vehicle message . If a certain speed is exceeded 2. Charge the vehicle battery by with parking brake applied. driving continuously for a while 93 Press button again to turn or by using a charging device. engine Off / Electric . If a programmed speed is vehicles exceeded. The warning message or warning code will disappear after the engine 94 Shift to Park . If a warning message or a warning code appears in the has been started twice 95 Service airbag Driver Information Centre. consecutively without a voltage drop. 120 Reduce speed for hill . If the parking assist detects an descent control object. If the vehicle battery cannot be recharged, have the cause of the 145 Washer fluid low – add fluid . If a fault in the automatic locking fault remedied by a Holden dealer. 151 Press clutch to start system is detected. 174 Low battery When the vehicle is parked 258 Park assist Off and/or the driver’s door is opened Warning Chimes . With exterior lights on. Only one warning chime will sound Battery voltage at a time. When the vehicle battery voltage is The warning chime regarding running low, a warning message or unfastened seat belts has priority warning code 174 will appear in the over any other warning chime. Driver Information Centre. When starting the engine or 1. Switch off immediately any while driving electrical consumers which are not required for a safe ride, e.g. . If seat belt is not fastened. heated rear window or other . If a door or the tailgate is not main consumers. fully closed when starting off. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

68 Instruments and Controls Trip Computer Trip odometer Trip Menu

Rotate the adjuster wheel \ to select the trip computer mode. . The trip odometer displays the . Each time the adjuster wheel \ recorded distance since last The trip computer is located in the is rotated, the mode changes in reset. driver information centre (DIC). the following order: . To reset, press SET/CLR for a The display shows: Trip odometer → Driving few seconds. distance for remaining fuel → . Trip odometer Average vehicle speed → . Driving distance for Instantaneous fuel consumption remaining fuel → Average fuel consumption → Driving time . Average vehicle speed . Some modes can be reset by . Instantaneous fuel consumption pressing and holding SET/CLR. . Average fuel consumption . Driving time Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 69

Driving distance for Average vehicle speed Instantaneous fuel remaining fuel consumption

. Average vehicle speed is . Estimates driving distance to an calculated from the last time the Instantaneous fuel consumption is empty fuel tank from the current computer was reset. displayed while the vehicle is being fuel level. . To reset, press and hold driven. The driving distance for remaining SET/CLR. This mode indicates the current fuel fuel may differ depending on: consumption and can change . Driving conditions frequently depending on driving conditions. . Driving pattern . Vehicle speed Note Ensure the vehicle is refuelled while on level ground. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

70 Instruments and Controls Average fuel consumption Driving time Vehicle Personalisation The settings can be personalised using the infotainment system controls.

. Average fuel consumption is . Indicates total driving time. calculated from the time the . Driving time is calculated from ignition is turned on. the last time the computer was . To reset, press and hold reset. SET/CLR. . To reset, press and hold SET/ Note CLR until a beep is heard. Depending on the vehicle variant, . To start/stop, press SET/CLR. some of the following functions may not be available. Settings Settings can be made with the ignition On and the vehicle not moving. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 71

The following are all possible To access the menu: Select On or Off. personalisation features and may differ from your vehicle. 1. Touch D. Comfort and Convenience D (Home) : Press to access the 2. Touch Settings. Select and the following may display: Home Page Menu. 3. Touch ‘Vehicle’. . Chime Volume Q or R : Touch to scroll through the Note menus or setup items. For the other items in the Settings . Personalisation by Driver 0 : Touch to exit, or return to the menu. Settings 0 106. . Auto Wipe in Reverse Gear previous screen or menu. Vehicle Chime Volume Some items can be set to On or Off, Select and the following may while other items have several This allows selection of the chime display: choices. The On setting is volume level. displayed as: . Collision / Detection Select level 24 to 38. . Comfort & Convenience Personalisation by Driver . Lighting This allows personalisation . Power Door Locks functions to be turned on or off. . Remote Lock Unlock Start Select On or Off. Collision / Detection Auto Wipe in Reverse Gear The Off setting is displayed as: Select and the following may This allows this feature to be turned display: on or off. When on, and the front wipers are on, the rear window . Park Assist wiper will turn on automatically Park Assist when the vehicle is shifted into R (Reverse). This allows this feature to be turned on or off. Select On or Off. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

72 Instruments and Controls

Lighting Remote Lock Unlock Start Remote Door Unlock Select and the following may Select and the following may This allows selection of which doors display: display: will unlock when pressing K on the . Exit Lighting . Remote Unlock Light Feedback remote control. Exit Lighting . Remote Lock Feedback When set to Driver Door, the driver’s door will unlock the first time K or This allows selection of how long . Remote Door Unlock the front door exterior handle button the exterior lamps stay on when . Relock Remotely Unlocked (vehicles with electronic key leaving the vehicle and it is dark Doors system) is pressed. All doors will outside. . Passive Door Unlock unlock when the button is pressed a Select Off, 30 Sec, 60 Sec, second time. When set to All Doors, or 120 Sec. . Passive Door Lock all of the doors will unlock at the first Power Door Locks . Remote Left in Vehicle Alert press of K or the front door exterior Remote Unlock Light Feedback handle button (vehicles with Select and the following may electronic key system). display: When on, the exterior lamps will Select All Doors or Driver Door. . Auto Door lock flash when unlocking the vehicle with the remote control. Relock Remotely Unlocked Doors Auto Door lock Select Flash Lights or Off. Activate or deactivate the automatic This allows selection for the doors Remote Lock Feedback relock function after unlocking to automatically lock when the without opening the vehicle. transmission lever is shifted out This allows selection of what type of Select On or Off. of park. feedback is given when pressing Q Select On or Off. on the remote control. Passive Door Unlock Select Lights Only, Lights & Horn, This allows the selection of what Horn Only, or Off. doors will unlock when using the button on the driver door to unlock the vehicle. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Instruments and Controls 73

Select All Doors or Driver Door Only. Passive Door Lock Activates or deactivates the passive locking function. This feature locks the vehicle automatically after several seconds if all doors have been closed and an electronic key has been removed from the vehicle. Select On, On with Horn Chirp or Off. Remote Left in Vehicle This feature sounds an alert when the remote control is left in the vehicle. Select On or Off. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

74 Lighting

Lighting Exterior Lighting 2 (Headlamps) : Turns on the headlamps and all park lamps when Exterior Lamp Controls the ignition is turned on. Exterior Lighting Exterior Lamp Controls ...... 74 Light Switch Headlamp High/ Headlamp High/Low-Beam Low-Beam Changer Changer ...... 74 Daytime Running Lamps (DRL) ...... 75 Hazard Warning Flashers ...... 75 Turn and Lane-Change Signals ...... 75 Front Fog Lamps ...... 76 Reverse Lamps ...... 76 Interior Lighting Instrument Panel Illumination Control ...... 76 Courtesy Lamps ...... 77 Reading Lamps ...... 77 9 : Turns all lamps and lights off. To activate high beam: Lighting Features Note Exit Lighting ...... 78 1. Turn the headlamps on. Battery Power Protection ...... 78 When the engine is running the DRLs will be on. 2. Push the lever forwards. ; (Park lamps) : Turns on the The high beam indicator park lamps, number plate lamps and lamp 3 illuminates on the instrument panel lighting. instrument cluster. To return to low beam: 1. Pull the lever rearwards. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Lighting 75

Daytime Running Use the hazard warning flasher if { Warning the vehicle becomes a traffic Lamps (DRL) hazard, day or night. Always switch the headlamps to Daytime running lamps increase Note low beam when vehicles are visibility of the vehicle during Using hazard warning flashers while approaching or when following daylight. another vehicle. the vehicle is moving, is illegal in They are switched on automatically some States and Countries. when the engine is running. To flash the high beam lamps: Turn and Lane-Change Hazard Warning Flashers Signals

1. Turn the ignition on.

2. Pull the lever towards the rear Press | to turn the hazard warning Push the lever in the direction the of the vehicle and release. flasher on or off, when the ignition is steering wheel is turned. in any position. The lights stay on for as long A green arrow on the instrument as the lever is held. All turn signals flash continuously. cluster flashes when the lamps are in operation. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

76 Lighting For three flashes, e.g. when Reverse Lamps Interior Lighting changing lanes: The reverse lamps illuminate when 1. Push the lever until the point of the ignition is on and reverse gear is Instrument Panel resistance, then release. engaged. Illumination Control Front Fog Lamps

1. Turn the headlamps on. 2. Rotate and hold the switch until The vehicle may have fog lamps. the desired brightness level is The ignition must be on to turn on reached. the fog lamps. # (Front Fog Lamps) : Press to turn the fog lamps on or off. An indicator light on the instrument cluster comes on when the fog lamps are on. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Lighting 77

Courtesy Lamps { Warning

Do not leave the courtesy lamp on while driving in the dark.

Reading Lamps

The vehicle may have reading lamps. Three settings are available: Push the courtesy lamp. . ( (Off) . H (Door activated) : The lamp automatically switches on when a door is opened and switches off when doors are closed. . ' (On) Note To prevent the battery from discharging, turn the lamp off when the engine is not running. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

78 Lighting Lighting Features Battery Power Protection The battery saver feature is Exit Lighting designed to protect the vehicle’s Set the headlamps to light the way battery. after leaving the vehicle. If some interior lamps are left on Activation, deactivation and duration and the ignition is turned off, the of the lighting can be changed in the battery rundown protection system vehicle settings. automatically turns the lamp off after some time. Vehicle Personalisation 0 70. 1. Switch the ignition off. 2. Remove the ignition key. 3. Open the driver's door. 4. Pull the turn signal lever rearward once (high beam flash). 5. Close the driver’s door and lock as desired. Note Exit lighting is activated for the period set in the vehicle settings. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 79 Bluetooth Phone/Devices Introduction Infotainment Pictures and Movies System (Pictures) ...... 111 Safety Information Pictures and Movies (Movies) ...... 113 Introduction Introduction ...... 79 Theft-Deterrent Feature ...... 81 Overview ...... 81 Operation ...... 82 Radio AM-FM Radio ...... 88 Fixed Mast Antenna ...... 91 Audio Players USB Port ...... 91 Auxiliary Devices ...... 97 Bluetooth Audio ...... 98 Phone Bluetooth ...... 101 Hands-Free Phone ...... 104 Settings Settings ...... 106 The lightning flash with the arrowhead symbol within an Downloadable Applications equilateral triangle is intended to Smartphone Link ...... 110 alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

80 Infotainment System

may be of sufficient magnitude to . To reduce the risk of electric constitute a risk of electric shock to shock, do not remove the cover Warning (Continued) persons. or back of this product. There are no user-serviceable parts vehicle in a safe location and inside. Refer servicing to operate the infotainment system qualified service personnel. while the vehicle is stationary. . To reduce the risk of fire or For your safety, some features electric shock, do not expose are disabled while the vehicle is this product to water, rain, in motion. or moisture and do not place The exclamation mark within an another electric device on LCD General Information equilateral triangle is intended to touch display. alert the user to the presence of The Infotainment system provides . When driving, keep the volume important operating and Infotainment in your car, using the of the unit low enough to allow maintenance (servicing) instructions latest technology. you to hear sounds from outside in the literature accompanying the the vehicle, such as emergency See your Holden dealer to have the product. services, etc. system or software updated and . Always operate the vehicle in a upgraded. . Do not drop it and avoid heavy safe manner. Do not become impacts at anytime. The radio can be easily used by distracted by the vehicle while registering up to 25 FM or AM driving and always be fully stations with the Preset function. aware of all driving conditions. { Warning Do not change settings or any The Infotainment system can play functions. The infotainment system must be USB storage device or iPod/iPhone used so that the vehicle can be products. Pull over in a safe and legal driven safely at all times. Stop the manner before attempting such Using the phone projection function, operations. To promote safety, (Continued) you can operate specific certain functions are disabled applications on your smartphone via unless the parking brake is on. the Infotainment system. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 81

The Bluetooth phone connection Therefore, the infotainment system 3. Seek (g) function allows for the use of will only function in the vehicle in wireless hands-free phone calls, as which it was first installed and Press to seek the station or well as a phone music player. cannot be used in another vehicle. media content. Connect a portable music player to 4. POWER (P) the auxiliary sound input to enjoy Overview . Press and hold to turn the the rich sound of the Infotainment Control panel power on/off. system. . Press to turn the mute The Overview section provides . “ ” function on/off. a simple overview of the Infotainment system’s functions 5. Volume knob and a summary of all regulatory Rotate the Volume knob to devices. adjust the volume. . The "Operation" section explains 6. Seek (d) the basic controls for the Infotainment system. Press to seek the station or . Design and specifications are media content. subject to change without notice. 7. Phone (5) . Some of the radio features may Press to access the Phone be limited when ignition is off. 1. Display screen. (If there is no Display for Play/Reception/ connected phone, the monitor Theft-Deterrent Feature Menu state and information. will show the Device The Infotainment system has an Management Menu to allow 2. HOME ({) electronic security system to you to connect a previously prevent theft. Press to enter the home menu. paired phone or establish a new Bluetooth enabled phone connection.) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

82 Infotainment System

Steering wheel remote control If the connected phone ‐ Bluetooth music mode: supports Speech plays the previous or Recognition, press and hold next music. to activate the phone’s SR . Press and hold: (Speech recognition) mode. ‐ FM/AM mode: 2. Mute/Hang up (5) sequentially searches Press in any music play mode the stations saved in to turn the mute function on PRESET. and off. ‐ Bluetooth, USB, iPod/ Press to reject incoming calls iPhone mode: quickly or to finish your current call or scans forwards or phone’s SR mode. backwards while the button is pressed. Once 3. SRC 1. Call (%) released, returns to Press to change the source, normal playback. . When there is no e.g. AM, FM, USB, etc. connected Bluetooth 4. Volume (+ x -) buttons Q R device on the SEEK ( / ) Press + to increase the Infotainment system . Press: volume. Executes the Bluetooth ‐ FM/AM mode: receives Press - to decrease the device connection. the previous or next volume. . When there is a preset station. connected Bluetooth Operation ‐ USB mode: plays the device on the previous or next file. Infotainment system System on/off iPod/iPhone mode: ‐ . Press P on the control panel to Press to answer the call or plays the previous or enter the redial next song. turn the power on. The last selection mode. audio or movie will be played. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 83

. Press and hold P on the control When the ignition switch is in the . Using the steering wheel remote panel to turn the power off. The OFF position and the driver’s door is control, press + x - to adjust the time and temperature will be opened, the Infotainment system is volume. turned off automatically. shown on the screen. . Turning on the Infotainment Note system will set the volume level If P is pressed and held when the to its previous selection (when it ignition switch is in the OFF is less than the maximum position, the infotainment system is starting volume). turned on for approximately . If the volume level is louder than 10 minutes. maximum starting volume level Volume control when the Infotainment system is turned on, the Infotainment Rotate the Volume knob on the system is adjusted automatically control panel to adjust the volume. to maximum starting volume The current sound volume is level. indicated. MUTE Note The time and temperature are Press P on the control panel to displayed when the ignition switch is turn the mute function on and off. in the ON position. Turning on/off automatically When the ignition switch is in the ACC or ON position, the Infotainment system is turned on automatically. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

84 Infotainment System

. Touch Projection to activate Android Auto or Apple Carplay. If a compatible smartphone is already connected to the USB port, the Projection icon will be replaced with Android Auto or Apple Carplay icons. . Touch Settings to enter the System Setup menu. Using HOME menu 2. Touch the desired menu. Managing Home Page Icons 1. Press { on the control panel. . Touch Audio to select AM/ 1. Touch and hold any of the Home menu may vary FM/ USB/ Bluetooth music Home Page icons to enter depending on the vehicle play or auxiliary (AUX) edit mode. option. input. 2. Continue holding the icon and . Touch Gallery to view drag it to the desired position. picture, movie. (Refer to 3. Release your finger to drop the "Before using Picture icon in the desired position. system" or "Before using Movie system" in "Gallery" 4. To move an application to section for a list of another page, drag the icon to supported file formats.) the edge of the screen towards the desired page. . Touch Phone to activate phone features (if 5. Continue dragging and connected). dropping application icons as desired. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 85

6. Press { to exit edit mode. Note { Note . Press to return to the . The Edit Mode exits after HOME menu. 30 seconds of inactivity. . If a playback source (iPod/ USB/ . The maximum number of pages AUX/ Bluetooth) is not in edit mode is three. connected to the Infotainment system, this function is not Selecting functions available. Audio . Audio source availability may vary depending on region or 1. Press { on the control panel. vehicle features. 2. Touch Audio on the . Touch AM to select AM . An additional USB device can be Home menu. radio. supported by attaching an 3. Touch Source on the screen. . Touch FM to select FM external USB hub from the radio. single USB port. . Touch USB to select USB . We don't recommend using a music. USB hub with 2 iPhone/iPod devices. Note When an iPod is connected to the Gallery USB port, 'USB' changes to 'iPod'. 1. Press { on the control panel. Select iPod to play music on the device. 2. Touch Gallery on the Home menu. . Touch Bluetooth to select Bluetooth music. . Touch AUX to select auxiliary sound (AUX) input. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

86 Infotainment System

Phone . If your Bluetooth phone is not To operate Bluetooth hands-free connected to the Infotainment function, connect the Bluetooth system, this function is not phone to the Infotainment system. available. For details, refer to “Pairing and connecting 1. Press { on the control panel. Bluetooth” in the “Phone” section. 2. Touch Phone on the Home menu. Or touch 5 on the PROJECTION control panel or steering wheel The phone projection applications control switch (if available). Android Auto and Apple CarPlay display selected apps from your smartphone on the infotainment . Touch \ to view picture screen and allow their operation files contained in the USB directly via the infotainment storage device. controls. . Touch s to view movie SETTINGS files contained in the USB { storage device. 1. Press on the control panel. Note 2. Touch Settings on the Home menu. . Press { to return to the HOME menu. . If the playback source (USB Note (picture) / USB (movie)) is not { connected to the Infotainment . Press to return to the system, this function is not HOME menu. available. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 87

. Press { to return to the HOME menu.

Note . The On setting is displayed as:

The Off setting is displayed as: Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

88 Infotainment System Radio Note . Press { to return to the AM-FM Radio HOME menu. Listening to FM/AM radio Searching for broadcasting automatically 1. Press { on the control panel. Touch g / d on the control panel 2. Touch Audio on the to automatically search for an Home menu. available station with good 3. Touch Source on the screen. reception. 4. Touch FM or AM on the Searching for broadcasting screen. The FM or AM radio directly Note band of the station most Touching “.” between digits is not recently listened to is 1. Touch t on the screen. necessary. The radio will add it displayed. 2. Touch the desired frequency. automatically at the correct location. 3. Touch Go. Searching for broadcasting by using the PRESET Saving a PRESET 1. Select the band (FM or AM) to store a station into. 2. Select the desired station. 3. Touch S / T to select the desired page of saved favourites. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 89

Using the FM/AM radio menu Station List General operation of the menu 1. From the FM/AM menu, touch the Station List to display the 1. Select the desired band (FM FM/AM station list. or AM). The station list information is 2. Touch Menu on the FM/AM displayed. radio screen.

4. Touch and hold any PRESET to save the current radio station to that PRESET on the selected favourites page. . Up to 5 favourites pages can be saved, and each page can store up to five radio stations. 2. Scroll through the list using Q / Listening to a PRESET directly 3. Touch the desired menu to R select the relevant item or to . Tune to the desired station by selecting it. 1. Repeatedly touch S / T to display the item’s select the desired page of detailed menu. Tone settings saved favourites. 4. Touch 3 to return to the From Tone Settings menu, sound 2. Touch the PRESET to directly previous menu. features can be set. listen to the radio station saved to that PRESET. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

90 Infotainment System

1. From the FM/AM menu, touch . Fade : Adjust the front/rear Categories (FM menu) Tone settings to enter Sound speaker balance by 1. From the FM menu, touch Setup mode. The tone settings dragging the round cursor Categories to display the FM menu is displayed. up or down the vehicle category list. The FM category interior image. list is displayed. . Balance : Adjust the left/ Q right speaker balance by 2. Scroll through the list using / dragging the round cursor R. Tune to the desired station left or right in the vehicle by selecting it. interior image. Note . EQ (Equaliser) : Select or The FM category list is only turn off the sound style. available for Radio Data (Talk, Rock, Jazz, Pop, System (RDS). Country, Classical, Custom) Update Station List 2. Touch 3. 1. From the FM/AM menu, press Auto Volume the Update Station List to . Touch -/+ to select the display the update FM/AM desired sound style When Auto Volume is turned on, the station list. The FM/AM manually. volume will automatically be broadcasting list update will . Bass : Adjust the bass level controlled according to the vehicle proceed. from −12 to +12. speed to offset the noise from the engine and tyres. . Mid (Midrange) : Adjust the midrange level from -12 1. From the FM/AM menu, touch to +12. the Auto Volume. . Treble : Adjust the treble 2. Select the desired option. (Off/ level from −12 to +12. Low/Medium-Low/Medium/ Medium-High/High) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 91 Region Audio Players Setting the jump function by Region broadcasting USB Port 1. From the FM/AM menu, find the Region by touching Q / R. 2. Select on or off. Fixed Mast Antenna To remove the roof antenna, rotate it anticlockwise. To install the roof 2. During the FM/AM antenna, rotate it clockwise. broadcasting list update, touch Cancel to stop it from saving Caution changes. To avoid damage, remove the RDS antenna before entering an The Infotainment system can play Setting the RDS function in a RDS automatic car wash or a place music files contained in a USB supported FM radio. with a low ceiling height. storage device, a device that supports Media Transfer Protocol 1. From the FM/AM menu, find (MTP), or supported iPods/iPhones. the RDS by touching Q / R. Install the antenna fully tightened and adjusted to the upright position Before using Audio system 2. Select on or off. to ensure proper reception. Supported audio file formats: . MP3 (MPEG-1 Layer 3, MPEG-2 Layer 3) Constant Bit Rate (CBR) between 8 and 320 kbps Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

92 Infotainment System

Variable Bit Rate (VBR) Cautions for using USB storage . The USB storage device can Sampling frequencies of 8, device and iPod/iPhone only be recognised when it is 11.025, 12, 16, 22.05, 24, 32, . Operation cannot be guaranteed formatted in FAT16/32, NTFS, 44.1, and 48 kHz if an HDD built-in USB mass HFS+. exFAT and other file storage device or a CF or SD systems cannot be recognised. . Windows Media Audio memory card is connected by . According to the type and Windows Media Audio 10 CBR using a USB adaptor. capacity of the USB storage between 32 and 768 kbps Use a USB or flash memory type device and the type of the stored VBR (Standard), Professional, storage device. file, the time it takes to recognise Lossless, or higher according to the files may differ. This is not a Microsoft specifications . Take care to avoid static problem with the system in this electricity discharge when case, so please wait for the files Sampling frequencies of 8, 12, connecting or disconnecting the to be processed. 16, 22, 32, 44.1, and 48 kHz USB. If connection and disconnection are repeated . Files in some USB storage . AAC (MPEG-4 AAC, Low devices may not be recognised Complexity Profile) and AAC+ many times within a short time, a problem may result. due to compatibility problems. CBR between 8 and 320 kbps. . Operation is not guaranteed if . Do not disconnect the USB . OGG Vorbis the connecting terminal of the storage device while it is being USB device is not metal. played. This may cause damage . Waveform (WAV – PCM to the system or the Windows format) . Connection with i-Stick type performance of the USB device. USB storage devices may fail . Audio Interchange File . Disconnect the connected USB Format (AIFF) due to vehicle vibration, so their operation cannot be guaranteed. storage device when the vehicle . 3GPP (Generally used for ignition is turned off. If the mobile devices) . Be careful not to touch the USB ignition is turned on while the connecting terminal with an device is connected, the device . Audio Books (MP3, WMA, object or any part of your body. AAC, AA) may be damaged or may not operate normally in some cases. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 93

. USB storage devices can only The iPod/iPhone can play all . Connect an iPod/iPhone to the be connected for the purpose of music files supported. But the USB port with an iPod/iPhone playing music/movie, viewing music file lists are displayed up cable to play the music files and photo files, or upgrading. to 5000 files on the screen in control the iPod/iPhone. When . The USB terminal should not be alphabetical order. the iPod/iPhone is connected to used to charge USB accessory . Some iPod/iPhone models may the AUX input terminal, the equipment since the heat not support the connectivity or music files are played, but not generation using the USB functionality of this system. controlled by MyLink. terminal may cause performance . Connect iPod/iPhones with a . iPod/iPhone movie file playback issues or damage to the system. connection cable supported by is not supported. . When a USB device contains Apple. Other cables may not . The playback functions and the more than one partition, only the operate correctly. information display items of the music files in the top-level . In some rare cases, the iPod/ iPod/iPhone used with the partition can be played. Store iPhone device may be damaged system may be different from the the music files in the top-level. if the ignition is turned on when iPod/iPhone in terms of play . Music files to which DRM (Digital it is connected to the system. order, method, and the information displayed. Right Management) is applied When the iPod/iPhone is not cannot be played. being used, keep it separate . Refer to the following table for . This system can support USB from the system when the car the classification items related to storage devices with a limit of ignition is turned off. the search function provided by the iPod/iPhone device. 5000 files (music, photo and . It is not recommended to use a Step1 Step2 video), and 15 levels of folder USB hub with two iPhone/iPod structure. Normal usage cannot devices. Playlists Playlists Songs be guaranteed for storage devices that exceed this limit. . When the iPod/iPhone is Artists Albums/ All Songs connected to the USB port with songs an iPod/iPhone cable, Bluetooth Albums Albums Songs music is not supported. Songs Songs Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

94 Infotainment System

Step1 Step2 Pause Genres Albums/ All Songs Touch j during playback. songs Touch r to resume playback. USB player Playing the next file Playing USB storage device music Touch d to play the next file. files Playing the previous file Connect the USB storage device containing the music files to the Touch g within 5 seconds of USB port. playback time to play the previous file. . Once the Infotainment system Note finishes reading the information If the USB storage device is already Returning to the beginning of the on the USB storage device, it connected, press { > Audio > current file will automatically start playing. Source > USB to play the USB Touch g after 5 seconds of (If you set USB Auto Launch to music files. Off in the Settings, it will not start playback time. playing automatically.) Ending the USB music files playback Scanning forward or backward . If a non-readable USB storage d device is connected, then an 1. Touch Source. Hold down g / during playback to rewind or fast-forward. Release error message will appear and 2. Select another function by the Infotainment system will be the button to resume playback at touching the AM, FM, AUX or normal speed. automatically switched to the Bluetooth. previous audio function. Note Playing files randomly Before removing the USB storage Touch Z during playback. device, select another function, and then remove the USB storage . Z : Plays all files randomly. device. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 95

. u : Returns to normal Browse Music MTP (Media Transfer Protocol) playback. 1. From the USB music menu, player General operation of the USB Touch Browse Music. Playing music from a supported music menu The number of relevant songs MTP device 1. Touch Menu on the USB music is displayed by all Playlists/ Connect the supported MTP device screen. Artists/Albums/Songs/ containing music files to the Genres/More. USB port. 2. Touch the desired music. . Once the Infotainment system Note finishes reading the information The infotainment system recognises on a device that supports Media playlist files by their extensions Transfer Protocol (MTP), it will “.asx”, “.m3u”, “.pls”, “.wpl”, “b4s”, automatically start playing. (If and “.xspf” (not case sensitive). you set USB Auto Launch to Off in the Settings, it will not start Tone settings playing automatically.) From the USB menu, sound . If a non-readable device that features can be set up. For details, supports MTP (Media Transfer refer to “Tone settings (FM/AM Protocol) is connected, then an menu)” in the “AM-FM Radio” error message will appear and 2. Touch the desired menu to section. the Infotainment system will be select the relevant item or to Auto Volume automatically switched to the display the item’s previous audio function. detailed menu. Volume will be automatically controlled. For details, refer to “Auto 3. Touch 3 to return to the Volume” in the “AM-FM Radio” previous menu. section. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

96 Infotainment System

indicator on the audio screen set the USB Auto Launch to off disappears, even if an audio file in Settings, it will not be in the MTP device is playing. automatically played.) . If you connect an MTP device that has external memory, it may be recognised as USB1/USB2. . Other operations are the same as a USB player. For details, refer to “USB player” in the “USB port” section. . To operate an MTP connection Note the user may be required to . Depending on the connected change the USB connection device, some files may not be setting to MTP on the device. played. iPod/iPhone player Note . File loading may take a few Limited to models supporting the minutes depending on the type If the iPod/iPhone is already iPod/iPhone connection of phone or the number of files/ . connected, press { > Audio > folders stored in the phone. Playing music files of iPod/iPhone Source > iPod to play the iPod/ iPhone. . When you connect the MTP Connect the iPod/iPhone containing device, the Infotainment system the music files to the USB port. Ending the iPod/iPhone playback scans audio files first and then . Once the Infotainment system 1. Touch Source. scans picture and movie files. finishes reading the information While scanning picture or movie 2. Select another function by on the iPod/iPhone, it will be files, these files may not be touching the AM, FM, AUX or automatically played from the available until the loading Bluetooth. previously played point. (If you Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 97

Note Playing files randomly 3. Touch 3 to return to the Before removing the iPod/iPhone, Touch Z during playback. previous menu. select another function, and then Browse Music remove the iPod/iPhone. . Z : Plays all files randomly. Pause 1. From the iPod music menu, . u : Returns to normal touch Browse Music. playback. Touch j during playback. The number of relevant songs Touch r to resume playback. General operation of the iPod is displayed by all Playlists/ music menu Artists/Albums/Songs/ Playing the next song 1. Touch Menu on the iPod music Genres/More. Touch d to play the next song. screen. 2. Touch the desired music. Playing the previous song Tone settings From the iPod menu, sound Touch g within 2 seconds of features can be set up. For details, playback time to play the refer to “Tone settings (FM/AM previous song. menu)” in the “AM-FM Radio” Returning to the beginning of the section. current song Auto Volume Touch g after 2 seconds of Volume will be automatically playback time. controlled. For details, refer to “Auto Volume in the AM-FM Radio Scanning forward or backward ” “ ” section. Hold down g / d during playback 2. Touch the desired menu to to rewind or fast-forward. Release Auxiliary Devices select the relevant item or to the button to resume playback at display the item s The Infotainment system can play normal speed. ’ detailed menu. auxiliary music connected by the auxiliary device. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

98 Infotainment System

Playing music source of . Type of AUX cable (3.5 mm) 2. Touch the desired menu to select the relevant item or to auxiliary device ‐ 3-pole cable : AUX cable for audio display the item’s Connect the auxiliary device detailed menu. containing the music source to the AUX input terminal. Once the 3. Touch 3 to return to the Infotainment system finishes previous menu. reading the information on the auxiliary device, it will automatically Tone settings start playing. (If you set USB Auto From the AUX menu, sound Launch to Off in the Settings, it will features can be set up. For details, not start playing automatically.) General operation of the AUX refer to “Tone settings (FM/AM music menu menu)” in the “AM-FM Radio” section. 1. Touch Menu on the AUX music screen. Auto Volume Volume will be automatically controlled. For details, refer to “Auto Volume” in the “AM-FM Radio” section. Bluetooth Audio If equipped, music may be played from a paired Bluetooth device. Refer to the “Phone” section for help Note pairing a device. . If the auxiliary device is already connected, press { > Audio > Before playing Bluetooth music Source > AUX to play the music . Supported profiles: A2DP, source on the auxiliary device. AVRCP Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 99

. Bluetooth music may not be hands-free while playing Phone supported depending on the music, the music is mobile phone or Bluetooth discontinued. device. . For Bluetooth music to play, the . A musical note icon (e) will music must be played at least appear on the screen if the once from the music player Bluetooth device is successfully mode of the mobile phone or connected. Bluetooth device after connecting as a stereo headset. . The sound played by the After being played at least once, Bluetooth device is delivered the music player will be through the Infotainment system. automatically played upon . Bluetooth music can be played entering play mode, and it will be Note only when a Bluetooth device automatically stopped when the If the Bluetooth device is not has been connected. To play music player mode ends. If the connected, then this function cannot Bluetooth music, connect the mobile phone or Bluetooth be selected. device is not in the waiting Bluetooth phone to the Pause Infotainment system. screen mode, some devices may not automatically play in Touch j during playback. Touch r . If the Bluetooth is disconnected Bluetooth music play mode. while playing phone music, the again to resume playback. music is discontinued. The audio Playing Bluetooth music Playing the next music streaming function may not be { supported in some Bluetooth 1. Press on the control panel. Touch d to play the next music. phones. Only one function can 2. Touch Audio on the Playing the previous music be used at a time between the Home menu. Bluetooth hands-free or Phone 3. Touch Source on the screen. Touch g within 2 seconds of music function. For example, playback time to play the previous if you convert to Bluetooth 4. Touch Bluetooth to select the music. connected Bluetooth music play mode. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

100 Infotainment System

Returning to the beginning of the Note current music This function may not be supported depending on the mobile phone. Touch g after 2 seconds of playback time. Tone settings Search From the Bluetooth music menu, sound features can be set up. For Hold down g or d to fast forward details, refer to “Tone settings (FM/ or rewind. AM menu)” in the “AM-FM Radio” Playing music randomly section. Auto Volume Touch Z during playback. Volume will be automatically 2. Touch the desired menu to . Z : Plays all files randomly. controlled. For details, refer to Auto select the relevant item or to “ Volume in the AM-FM Radio u display the item s ” “ ” . : Returns to normal ’ section. playback. detailed menu. Caution on playing Bluetooth Note 3. Touch 3 to return to the music: Some functions may not be previous menu. supported depending on the mobile . Do not change the track too phone. Browse Music quickly when playing Bluetooth 1. From the Bluetooth music music. General operation of the Bluetooth menu, Touch Browse Music. music menu . It takes some time to transmit The number of relevant songs data from the mobile phone to 1. Touch Menu on the Bluetooth is displayed by all Playlists/ the Infotainment system. The music screen. Artists/Albums/Songs/Genres/ Infotainment system outputs the More. The items may vary audio from the mobile phone or depending on the mobile Bluetooth device as it is phone. transmitted. 2. Touch the desired music. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 101 . If the mobile phone or Bluetooth Phone . Due to the variety of Bluetooth device is not in the idle screen devices and their firmware mode, it may not automatically versions, your device may play even though it is in Bluetooth respond differently when Bluetooth music play mode. Understanding Bluetooth performing over Bluetooth. . The Infotainment system wireless technology . Any inquiries regarding your transmits the order to play from phone s Bluetooth functionality, Bluetooth wireless technology ’ the mobile phone in the refer to the device manual. establishes a wireless link between Bluetooth music play mode. two devices supported with . Multi-pairing is not supported. If this is done in a different Bluetooth. mode, then the device transmits Pairing and connecting the order to stop. Depending on After the initial pairing, the two Bluetooth the mobile phone's options, this devices can connect automatically order to play/stop may some each time you turn them on. To use the Bluetooth feature, make take time to activate. Bluetooth allows wireless sure Bluetooth on your device is transmission of information among turned on, and your device should . If Bluetooth music playback is Bluetooth phones, PDAs, or other be in discoverable mode. Refer to not functioning, check to see if devices within close range by using the user guide for the Bluetooth the mobile phone is in the idle 2.45 GHz frequency short-distance device. screen mode. wireless telecommunication When there is no paired device on . Sometimes, sounds may be cut technologies. Within the vehicle, the Infotainment system off during the Bluetooth music users can make hands-free calls, playback. transmit hands-free data, and play 1. Press { on the control panel. audio streaming files by connecting 2. Touch Phone on the a mobile phone to the system. Home menu. Note Or touch 5 on the control . There may be restrictions on using Bluetooth wireless panel. technology in some locations. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

102 Infotainment System

Or touch % on the steering follow step 6. To add a device wheel remote control. not in the list, touch Search Device. 3. Touch Search Device to search for Bluetooth phones. 5. Touch the desired device to pair on the searched list 4. Touch the desired device to screen. pair on the searched list screen. . If SSP is supported, touch Yes or Pair on the pop-up . If SSP (Secure Simple screen of the Bluetooth Pairing) is supported, touch device and the Infotainment Yes or Pair on the pop-up system. screen of the Bluetooth device and the Infotainment If the connection fails, a failure . If SSP is not supported, system. message is displayed on the input the PIN code on your Infotainment system. Bluetooth device as shown . If SSP is not supported, on the screen. input the PIN code on your When there is a paired device on Bluetooth device as shown the Infotainment system 6. When your Bluetooth device on the screen. and the Infotainment system 1. Press { on the control panel. are successfully paired, Z / 5 5. When your Bluetooth device and Infotainment system are 2. Touch Settings on the is displayed on the “Device successfully paired, the Home menu. Management” screen. "Phone" screen is displayed on 3. Touch Bluetooth > Device . The connected phone is the Infotainment system. Management. highlighted with a 5 mark. 4. Touch the device you wish to . The Z / 5 mark indicates pair from the “Device that the hands-free and Management” screen, and then phone music functions are enabled. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 103

. The 5 mark indicates that . If the Phone book lists exceed 5. Touch Disconnect. 5000 entries, the Infotainment only the hands-free function Connecting the Bluetooth is enabled. system does not guarantee proper listing of the remaining Device . The Z mark indicates only Phone book entries. 1. Press { on the control panel. Bluetooth music is enabled. . Depending on the Phone book 2. Touch Settings on the Note entries, pairing time may vary. Home menu. . The phone book is automatically Checking the connected downloaded when your 3. Touch Bluetooth > Device Bluetooth phone is successfully Bluetooth device Management. paired with the Infotainment 1. Press { on the control panel. 4. Touch the device you wish system, if supported by the type to pair. of phone. 2. Touch Settings on the Home menu. Deleting the Bluetooth Device If it is not automatically downloaded, proceed with the 3. Touch Bluetooth > Device If you no longer need to use the phone book download on your Management. Bluetooth device, you can delete it. phone. It is recommended that 4. The connected device will be 1. Press { on the control panel. you always accept the phone shown. book request during the initial 2. Touch Settings on the pairing of the phone. Disconnecting the Bluetooth Home menu. Device . The Infotainment system can 3. Touch Bluetooth > Device register up to ten Bluetooth 1. Press { on the control panel. Management. devices. 2. Touch Settings on the 4. Touch Y. . If the connection fails, a failure Home menu. message is displayed on the 5. Touch Delete. Infotainment system. 3. Touch Bluetooth > Device Management. 4. Touch the name of the device you wish to disconnect. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

104 Infotainment System

Hands-Free Phone Note Note If you touch the wrong number, Redialling is not possible when Making a call by entering touch 0 to delete the entered there is no call history. phone number number one digit at a time or touch Taking calls 1. Enter the phone number using and hold 0 to delete all the entered 1. When a phone call comes the keypad on the "Phone" digits. screen. through the connected Switching call to mobile phone Bluetooth mobile phone, the (Private Mode) playing track will be cut off and the phone will ring with the 1. If you want to switch the call to relevant information displayed. a mobile phone instead of the car hands-free, touch 0. 2. To talk on the phone, touch % on the steering wheel remote 2. If you want to switch the control or touch 5 on the call back to the hands-free, screen. touch 0 again. The call is switched to the car hands-free. To reject the call, touch the 5 on the steering wheel remote Switching the microphone K on/off control or touch on the screen. 2. Touch 5 on the screen or You can switch the microphone on/ % Using the Contacts menu on the steering wheel remote off by touching 3. 5 1. Touch Contacts on the control. Or touch on the Calling by Re-dial control panel. "Phone" screen. From the steering wheel remote 2. Use Q / R to scroll through control, touch % or touch 5 on the the list. "Phone" screen. 3. Select the Phone book entry you want to call. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 105

4. If a contact has two or more 2. Touch jkl to select the second . 2 : Dialled call phone numbers, touch a character. . Y: Missed call number to call. The names containing the Searching for Contacts entries characters “j”, “k”, or “l” are . X: Received call displayed on the “Contacts” 1. Touch Contacts on the screen. 3. Select the contact you want "Phone" screen. to call. 3. Touch def to select the third 2. Touch } on the “Contacts” character. Making a call with speed dial screen. The names containing the numbers 3. Use the keypad to input the characters “d”, “e”, or “f” are Touch and hold a speed dial number name you want to search. displayed on the “Contacts” using the keypad on the "Phone" screen. For details, refer to “Searching screen. for the name” in the “Phone” 4. Touch wxyz to select the fourth Only speed dial numbers already section. character. stored on the mobile phone can be 4. Select the Phone book entry The names containing the used for speed dial calls. Up to you want to call. characters “w”, “x”, “y”, or “z” 2-digit speed dial numbers are are displayed on the Contacts supported. Searching for the name “ ” screen. For 2-digit speed dial numbers, For example, when the user 5. As more letters of the name touch and hold the 2nd digit to make searches for a name, such as alex “ ” are entered, the list of possible a call to the speed dial number. 1. Touch abc to select the first names is shortened. Voice Mail character. Making a call from Call history The default voice mail number is the The names containing the phone number of the currently characters “a”, “b”, or “c” are 1. Touch Call History on the "Phone" screen. connected phone. The voice mail displayed on the “Contacts” number can be changed in screen. 2. Touch W, 2, Y or X. Bluetooth settings. . W : All call history Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

106 Infotainment System To dial a voice mail number: Settings Time and Date 1. Touch the Phone screen 1. Touch Time and Date. button. General operation of the settings menu 2. Select Voice Mail. The Infotainment system can be 3. Select Call. customised to make it easier for you to use. 1. Press { on the control panel. 2. Touch Settings.

. [Set Time Format] : Select 12h or 24h time display. . [Set Date Format] : Set the date display format. ‐ [DD/MM/YYYY] ‐ [MM/DD/YYYY] ‐ [YYYY/MM/DD] 3. Select the desired setting value. . [Auto Set] : Select Off-Manual, On-RDS, Note On-GPS or On-Cell Settings menus and functions may Network for time setting. vary depending on your vehicle (This varies depending on option. the region.) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 107

. [Set Time] : Set the time by 2. Select language displayed on . [Text Scroll] : Allow scrolling touching +/-. the Infotainment system. of text such as radio station identification, messages, . [Set Date] : Set the date by Radio touching +/-. or music information. 1. Touch Radio. Note . [Tone Settings] : Set the sound feature. For details, . Depending on the region, the refer to “Tone settings (FM/ [Auto Set] menu may not be AM menu)” in the “AM-FM supported. Radio” section. . [Set Time] and [Set Date] are . [Auto Volume] : Volume will only available when you set be automatically controlled. [Auto Set] to [Off-Manual]. For details, refer to “Auto Language Volume” in the “AM-FM Radio” section. 1. Touch Language. . [Maximum Startup Volume] : Set the max startup volume (13 to 37). . [Manage Favourites] : Vehicle Select the number of favourite list on the radio See Vehicle Personalisation 0 70. screen. Bluetooth . [Audible Touch Feedback] : Allow audible feedback 1. Touch Bluetooth. when touching the radio screen. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

108 Infotainment System

. [Voice Mail Numbers] : For Apple CarPlay: “While Change the voice mail active, Apple CarPlay will be number. displayed on this screen” For Android Auto: “While active, Android Auto will be displayed on this screen” . When a device is first connected, the device's projection privacy consent pop-up message will be displayed. . [Device Information] : Check the device information. . [Device management] : Select the desired device Apple CarPlay and and connect/disconnect or Android Auto delete. 1. Touch Apple CarPlay or . [Change Pairing PIN] : Android Auto. Manually change/set the 2. Select on or off. PIN code. Note . [Ringtones] : Change the . Even if you set the Projection ringtone. function to “Off”, connecting a Touch Continue to activate the [Sort Order] : Change the “ ” . device and touching the Projection function. sorting order of contacts. Projection function on the Home (First/Last or Last/First) screen will display a pop-up Touch “Disable” to just charge message as follows: the device. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 109

USB Auto Launch Rear Camera 1. Touch USB Auto Launch. The [Rear Camera] menu is 2. Select on or off. available on vehicles fitted with a rear vision camera. . [On] : If you connect the device through USB port, it 1. Touch Rear Camera. will be launched automatically. . [Off] : If you connect the device through USB port, it will not be launched automatically. 3. Touch Turn Display Off to turn Turn display Off the display off. 1. Press on the control panel. 4. Press any button or touch the 2. Touch Settings and find [Turn screen to turn the display On. Display Off].

. [Guidance Lines] : Select the Guidance Lines feature to turn on or off. . [Rear Park Assist Symbols] : Select the Rear Park Assist Symbols feature to turn on or off. Return to Factory Settings 1. Touch Return to Factory Settings. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

110 Infotainment System Downloadable Applications Smartphone Link Apple CarPlay and Android Auto Apple CarPlay™ and/or Android Auto™ capability may be available through a compatible smartphone. The radio screen will indicate a . [Reset Vehicle Settings] : . [Open Source] : Display PROJECTION ICON on the HOME Restore all vehicle settings. Open Source Software screen. licensing information. . [Clear All Private Data] : To use Android Auto and/or Apple Clear all private data from . [System Update] : Update CarPlay: the system. the system. 1. Download the Android Auto . [Restore Radio Settings] : app to your phone from the Restore all radio settings. Google Play™ store. There is Software Information no app required for Apple CarPlay. 1. Touch Software Information. 2. Connect your Apple iPhone® or Android™ Phone using the compatible phone USB cable plugged into a USB data port. For best performance, use your device’s factory-provided USB Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 111 cable. Aftermarket or trademark of Apple Inc., Android Bluetooth Phone/ third-party cables may Auto™ is a trademark of not work. Google Inc. Devices Note Ensure SIRI is activated on your Pictures and Movies iPhone. (Pictures) The PROJECTION icon on the Note HOME screen will change to Picture and movie function are not Android Auto™ or Apple CarPlay™ supported for iPhone. depending on the phone. Apple CarPlay and/or Android Auto may Gallery (Pictures) automatically launch upon USB The Infotainment system can view connection. If not, press the APPLE picture files contained in the USB CARPLAY and/or ANDROID AUTO storage device. icon on the HOME screen to launch. For further information on how to set up Apple CarPlay and Android Auto in the vehicle, see www.holden.com.au. CarPlay is provided by Apple and is subject to Apple’s terms and privacy policy. Android Auto is provided by Google and is subject to Google’s terms and privacy policy. For further information, support and compatible devices, see www.apple.com or www.google.com. Apple or Google may change or suspend availability at any time. Apple CarPlay™ is a Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

112 Infotainment System

Caution on using picture files 2. Touch the screen to hide the Rotating a picture . Only the following file extensions control bar. Touch the screen again to show the control bar From the picture screen, touch w to are supported: *.jpg, *.bmp, rotate the picture. *.png, *.gif (Animated GIF is not again, touch 3 to return to supported.) the previous screen. Enlarging a picture . Some files may not operate due Note From the picture screen, touch x to to a different format or the . If the USB storage device is enlarge the picture. condition of the file. already connected, touch { > Viewing to full screen Viewing a picture Gallery > \ to view the picture files. From the picture screen, touch Fit 1. Connect the USB storage to view full screen. Touch Fit again device containing picture files . For your safety, some features to return to the previous screen. to the USB port. are disabled while your vehicle is in motion. The picture will be displayed. Using the USB picture menu Viewing slide show 1. From the picture screen, touch MENU. The USB picture menu From the picture screen, touch z. is displayed. . The slideshow will be played. . Touch the screen to cancel the slideshow during slideshow playback. Viewing a previous or next picture From the picture screen, touch S or T to view previous or next picture. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Infotainment System 113

Pictures and Movies ‐ AC3: 640 kbps (Movies) ‐ AAC: 320 kbps Gallery (Movies) . Movie files to which DRM (Digital Right Management) is The Infotainment system can play applied may not be played. movie files contained in the USB storage device. Playing a movie file Before using the Movie system 1. Connect the USB storage device containing the movie file The following movie file formats to the USB port. are supported: 2. Press { > Gallery > s and 2. Touch the desired menu. . Available resolution: Up to 1280 select a movie file. The movie x 720 pixels. (1280 x 720 is will be played. . [Slide Show Time]: Select supported) the slide show interval. . Frame rate: less than 30 fps. . [Clock. Temp. Display]: For full-screen display of the . Playable movie file: “.mp4”, clock and temperature, “.avi”. The playable movie file select On or Off. may not be played according to the codec format. . [Display Settings]: Adjust the Brightness and . Playable Codec format: H.264/ Contrast. MPEG-4 AVC 3. After the setting is complete, . Playable Audio format: “MP3”, touch 3. “AC3”, “AAC”, “WMA” . Max Audio Bitrate: ‐ MP3: 320 kbps ‐ WMA: 768 kbps Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

114 Infotainment System

3. Touch the screen to hide the Scanning forward or backward 2. Touch the desired menu. control bar. Touch the screen Hold down t / u during playback . [Tone Settings] : Set the again to show the control bar sound feature. For details, again, touch 3 to return to to rewind or fast-forward. Release the button to resume playback at refer to “Tone settings (FM/ the previous screen. normal speed. AM menu)” in the “AM-FM Pause Radio” section. Viewing to full screen . [Auto Volume] : Volume will Touch j during playback. From the movie screen, touch Fit to be automatically controlled. For details, refer to Auto Touch r to resume playback. view full screen. Touch Fit again to “ return to the previous screen. Volume” in the “AM-FM Playing the next movie Radio” section. Using the USB movie menu [Clock. Temp. Display] : For Touch u to play the next movie. . 1. From the movie screen, touch full-screen display of the Playing the previous movie MENU. The USB movie menu clock and temperature, is displayed. select On or Off. Touch t within 5 seconds of . [Display Settings] : Adjust playback time to play the previous the Brightness and movie. Contrast. Returning to the beginning of 3. After the setting is complete, the current movie touch 3. Touch t after 5 seconds of playback time. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Climate Controls 115 Climate Controls Climate Control Temperature (1) Systems Rotate the temperature switch: Red : Warm Climate Control Systems Air Conditioning System ...... 115 Air Conditioning System Blue : Cold Fan (2) Air Vents { Danger Adjustable Air Vents ...... 118 Rotate the fan speed switch A to Maintenance Do not sleep with the air the desired speed, between 0 Air Intake ...... 118 conditioning or heating system and 4. Passenger Compartment Air on. Serious harm or death may Filter ...... 119 occur due to a drop in oxygen Mode (3) level and/or body temperature. Select an air outlet by rotating the mode switch. Air is directed: Controls E : To the instrument panel vents. ) : To the instrument panel vents and floor vents. [ : To the floor vents. A small amount of air is directed to the windscreen, outer instrument panel vents and side window demist vents. - : Between the windscreen and floor vents, some to the outer instrument panel vents and side window demist vents. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

116 Climate Controls

0 : To the windscreen and side 6. Press A/C. The light in the Maximum cooling window demist vents, with a small button illuminates. amount of air to the outer instrument Note panel vents. . To conserve fuel, the air Air conditioning (4) conditioning can be switched off. . Warm air will be directed to the air outlets if the temperature switch is in the red zone, even when A/C is pressed. Recirculation (5) Rotate the recirculation knob to the left h. Note Use maximum cooling for quick . Recirculation reuses interior air cooling of the passenger so is not recommended for long compartment. periods of time. 1. Start the engine. 1. Turn the ignition on. . Do not use recirculation if 2. Press A/C. occupants are smoking. 2. Rotate the fan speed switch A The light in the button to the desired speed. illuminates. 3. Rotate the temperature switch 3. Rotate Recirculation knob to to within the blue zone. the left h. 4. Rotate the mode switch to 4. Rotate the temperature switch select an air outlet. to cold air. 5. Adjust the angle of the air Y vents. 5. Rotate the mode switch to . Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Climate Controls 117

6. Adjust the angle of the air If the mode switch is set to 2. Press R 1 to switch on or off. vents. Defrost mode , A/C will be 0 The light in the button 7. Rotate the fan speed switch to operated automatically and be illuminates when on. the desired speed. set to demist or defrost as quickly as possible regardless Heating is switched off Windscreen demister of indicator status. automatically after a few minutes. 5. In winter, turn the recirculation knob. Caution Off Do not use sharp objects or Rotate the fan speed switch A to 0 abrasive window cleaners on the to switch off all heating, ventilation rear window. Do not scratch or and cooling. damage the wires when cleaning. Rear window demister (6)

1. Rotate the mode switch to 0. 2. Rotate the temperature switch to the desired temperature. 3. Rotate the fan speed switch A to the desired speed. 4. Open the side air vents and direct towards the door windows. 1. Start the engine. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

118 Climate Controls Air Vents Maintenance Adjustable Air Vents Air Intake

Direct the air flow by tilting the slats. To close the outer vents, move the slats to outer side. (A small amount of air may still flow.) Direct the air flow by tilting the slats. Outside air is drawn into the vehicle { Warning The centre vents cannot be closed. through the opening between the bonnet and the windscreen. Do not attach objects to the vents. Damage or injury may Keep the area clear of debris. occur.

Fixed air vents Fixed air vents are located beneath the windscreen, front door windows and in the footwells. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Climate Controls 119

Passenger Compartment Water Air Filter Water condensation can leave traces of clear water on the ground Cabin air filtration underneath the vehicle. The pollen filter removes Service particulates such as pollen, dust, and soot from the cabin air inlet. Have the air conditioning serviced at The filter should be replaced as part the frequency shown in the of routine scheduled maintenance. Maintenance schedule in the Service/Warranty Booklet. Caution

Have the pollen filter replaced if driving frequently on dusty and unpaved roads or in polluted areas.

Regular operation Switch air conditioning on for at least 5 to 10 minutes once every two weeks to lubricate the system, even in winter.

Caution

Use only the correct Refrigerant and A/C Compressor Oil. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

120 Driving and Operating Brakes Driving Information Driving and Brakes ...... 132 Operating Antilock Brake System (ABS) ...... 133 Control of a Vehicle Parking Brake ...... 134 Never coast with engine not Driving Information Brake Assist ...... 134 running Control of a Vehicle ...... 120 Hill Start Assist (HSA) ...... 134 Steering ...... 121 Many systems will not function in Ride Control Systems this situation (e.g. brake servo unit, Starting and Operating Traction Control power steering). Driving in this New Vehicle Break-In ...... 121 System (TCS) ...... 135 manner is a danger to yourself and Ignition Positions ...... 122 Electronic Stability others. Starting the Engine ...... 123 Control (ESC) ...... 136 Idle boost Retained Accessory Object Detection Systems Power (RAP) ...... 125 Parking Assist ...... 137 If charging of the vehicle battery is Parking ...... 125 Rear Vision Camera (RVC) . . . 138 required due to vehicle battery Extended Parking ...... 126 condition, the power output of the Driver Assistance Systems Engine Exhaust generator must be increased. This Driver Assistance Systems . . . 141 will be achieved by an idle boost Engine Exhaust ...... 127 Cruise Control ...... 141 which may be audible. Catalytic Converter ...... 127 Fuel Automatic Transmission Pedals Fuel ...... 143 To ensure the pedal travel is Automatic Transmission ...... 127 Filling the Tank ...... 145 Transmission Display ...... 128 uninhibited, there must be no loose Fault ...... 130 mats in the area of the pedals. Interruption of Power Floor Mats 0 189. Supply ...... 130 Before entering the vehicle Manual Transmission Manual Transmission ...... 132 Check that windows, mirrors and lamps are clean. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 121 Visually check tyre inflation. Check If the steering wheel is turned until it Starting and tyre pressures weekly. reaches the end of its travel and is held against that position for an Operating Before driving off extended period of time, power 1. Close and secure all doors. steering assist may be reduced. New Vehicle Break-In 2. Position the seat for Normal use of the power steering Use the following precautions to comfortable driving. assist should return when the improve performance: system cools down. 3. Adjust rear view mirrors. . Do not make full throttle starts. Control indicator m. Variable Effort 4. Fasten seat belts. . Avoid downshifting to brake or Steering Light 0 61. 5. Check that warning indicators slow the vehicle. illuminate when turning the Caution . Avoid hard stops except in ignition on. emergencies to avoid premature Control Indicators 0 56. Do not turn and hold the steering wear and the need for early wheel in the fully turned position replacement of brakes. Steering when stationary. . Avoid heavy acceleration and If the steering assist is used for prolonged high-speed driving to Electric Power Steering avoid damage to the engine and an extended period of time, power to conserve fuel. The vehicle has electric power assist may be reduced. steering. It does not have power . Do not brake unnecessarily hard steering fluid. Regular maintenance Normal use of the power steering for the first few journeys. is not required. assist should return when the system cools down. . During the first drive, smoke If power steering assist is lost due may occur because of wax and to a system malfunction, the vehicle oil evaporating off the exhaust can be steered, but may require system. Park the vehicle in the increased effort. See a Holden open for a while after the first dealer if there is a problem. drive and avoid inhaling the fumes. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

122 Driving and Operating

. During the running-in period fuel The steering wheel is automatically and engine oil consumption may locked when the key is removed. { Warning be slightly higher. To release the steering lock, Do not turn the engine off while re-insert the key and turn it towards Ignition Positions the vehicle is moving as there will the front of the vehicle. If still not be any power assist for Vehicles with ignition switch locked, turn the steering wheel brakes or steering. Never remove slightly to the right or left while the key while the vehicle is turning the key towards the front of moving, as this will lock the the vehicle. steering. ACC : When the key is in this position, the audio system operates. Vehicles with electronic key ON : When the key is in this system position, the engine is ready to start and all electrical systems are active. Warning lamps will illuminate. Do not leave the switch in the ON position for a long time, unless the engine is running, otherwise the vehicle's battery will discharge. LOCK : When the key is in this START : Turn the key to this position, some electrical position and release when the accessories and the engine are off. engine is running. The key can only be inserted and removed from this position. The engine is automatically disabled Electronic key must be inside the shortly after removing the key from vehicle. the ignition. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 123

Accessory power mode : press Steering wheel lock Starting the Engine Engine Start/Stop button once The steering wheel lock activates without operating the brake pedal. Vehicles with ignition switch automatically when: The yellow LED in the button illuminates. Steering wheel lock is . the vehicle is stationary and released and some electrical . the ignition has been switched functions are operable, ignition off and is off. . the driver’s door is opened. Ignition on power mode : press and hold Engine Start/Stop button To release steering wheel lock, for 6 seconds without operating open and close driver’s door and brake pedal. The green LED in the switch on accessory mode or start button illuminates. Control indicators the engine directly. light up and most electrical functions are operable. { Warning Engine start : press the brake If the vehicle battery is pedal and press the Engine Start/ Apply the park brake firmly. discharged, the vehicle must not Stop button once. Release button be flat-towed or push started as Manual transmission : Press the after starting procedure begins. clutch pedal to the floor and move the steering wheel lock cannot be the shift lever to the neutral position. Ignition off : press Engine Start/ disengaged. Stop button briefly in each mode or Automatic transmission : Move the when engine is running. Some shift lever to the park or neutral functions remain active until the position. driver’s door is opened. Do not operate accelerator pedal. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

124 Driving and Operating

Turn the key briefly to position Vehicles with electronic key Note START and release : An automatic system . Do not press the accelerator procedure operates the starter with pedal while starting the engine. a short delay until the engine is running. . Do not subject the engine to full throttle acceleration or high Before restarting or to switch off the speeds until it has reached engine, turn the key back to normal operating temperature. position LOCK. Premature engine wear or Note damage may result. . Do not press the accelerator pedal while starting the engine. Starting the vehicle with a low transmitter battery . Do not subject the engine to full throttle acceleration or high If either the electronic key fails or speeds until it has reached the battery of the electronic key is weak, the Driver Information Centre normal operating temperature. Apply the park brake firmly. may display “No remote detected” Premature engine wear or Move the shift lever to the park or when you try to start the vehicle. damage may result. neutral position. Press the brake Vehicle Messages 0 65. pedal. Do not operate accelerator pedal. Press and release Engine Start/Stop button : an automatic procedure operates the starter with a short delay until the engine is running, see Automatic Starter Control. Before restarting or to switch off the engine, press Engine Start/Stop button once more. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 125

Retained Accessory Manual transmission : If facing uphill or on flat ground, select Power (RAP) 1st gear. If facing downhill, Retained power off select reverse gear. The following electrical systems On an uphill gradient turn the operate for 10 minutes after the front wheels away from ignition is switched off: the kerb. . power windows On a downhill gradient turn the front wheels towards the kerb. . power outlets 3. Shut all windows. . Infotainment system 4. Turn the ignition off and Place the electronic key in the The infotainment system can be remove the key. centre console transmitter pocket. turned back on. 5. Press Q on the key to lock all Press the brake pedal and press the Once the driver’s door is opened Engine Start/Stop button. after the ignition is switched off: doors. Central Locking System 0 20. To switch off the engine, press the . the power windows operate for Engine Start/Stop button again. approximately 45 seconds, and Remove the electronic key from the { Warning transmitter pocket. . the infotainment system will turn off but can be turned back on. . Always apply parking brake. This option is intended for Apply the parking brake emergencies only. Replace the Parking without pressing release electronic key battery as soon as button. Apply as firmly as possible. Remote Control 0 18 1. Apply the parking brake firmly possible on downhill or without engaging the release For unlocking or locking the doors uphill slopes. Press the foot button. see fault in remote control unit or brake at the same time to electronic key system. Remote 2. Automatic transmission: Select reduce operating force. Control 0 18. position P. (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

126 Driving and Operating

If the vehicle is left in P (Park) while Warning (Continued) { Warning running and the RKE transmitter is inside the vehicle, the vehicle will . Switch off the engine and Be careful where you park or run for two hours. At the end of the ignition. Turn the steering drive. As with any vehicle, do not second hour, the vehicle will wheel until the steering park or operate the vehicle in switch off. wheel lock engages. areas where combustible The timer will reset if the vehicle is . If the vehicle is on a level materials such as dry grass or leaves can come in contact with a taken out of P (Park) while it is surface or uphill gradient, running. engage first gear before hot exhaust system. Exhaust switching off the ignition. On gases are hazardous, especially if an uphill gradient turn the they concentrate in closed rooms. front wheels away from Never leave the engine running in the kerb. an enclosed space such as a If the vehicle is on a closed garage or underground downhill gradient, engage car park. reverse gear before switching off the ignition. Turn the front wheels Extended Parking towards the kerb. It is better not to park with the . Lock the vehicle. vehicle running. If the vehicle is left running, follow the proper steps to ensure that the vehicle will not move and there is adequate ventilation. See Engine Exhaust 0 127. If the vehicle is left in P (Park) while running and the Remote Keyless Entry (RKE) transmitter is outside the vehicle, the vehicle will turn off after one hour. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 127

Engine Exhaust Caution Automatic Transmission { Danger Use of low quality fuel or fuel with too low an octane number may Continuously Variable Engine exhaust gases contain damage the engine, the catalytic Transmission (CVT) poisonous carbon monoxide, converter or electronic The CVT is electronically controlled which is colourless and odourless components. to continuously provide the optimal and could be fatal if inhaled. Unburnt petrol will overheat and gear ratio as you drive. If exhaust gases enter the interior damage the catalytic converter. Starting the vehicle of the vehicle, open the windows. Therefore avoid excessive use of Have the cause of the fault the starter, running the fuel tank 1. Press the brake pedal while rectified by a Holden dealer. dry and starting the engine by moving the shift lever to either the R, D or L position. Avoid driving with an open load pushing or towing. compartment, otherwise exhaust gases could enter the vehicle. If the engine misfires, runs Caution unevenly, engine performance is Do not shift between D (drive) reduced or other problems occur, and R (reverse) or P (park) while Catalytic Converter contact a Holden Dealer as soon as the vehicle is moving. The catalytic converter reduces the possible. amount of harmful substances in the In an emergency, drive for a short exhaust gases. period, keeping the vehicle and 2. Release the park brake and the engine speed low. brake pedal. 3. Slowly press the accelerator pedal. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

128 Driving and Operating

Transmission Display L: (low) This position locks the transmission in an optimised The selected gear is indicated in the low gear. instrument cluster. Select L for maximum engine Shift lever braking when driving down steep gradients.

Caution

Do not accelerate while engaging a gear. Never press the accelerator pedal Movement between certain gear and brake pedal at the positions requires pressing the same time. release button on the front of the When a gear is engaged, the shift lever. vehicle slowly begins to creep Follow the descriptions as indicated when the brake is released. by the arrows when shifting the shift Do not use the P (park) position lever. P: (park) In park position, the front in place of the park brake. wheels are locked. Select P only when the vehicle is stationary and Turn off the engine, apply the the parking brake is applied. parking brake and remove the R: (reverse) Place in reverse only ignition key when leaving the when the vehicle is stationary. vehicle. N: (neutral) Never leave the vehicle unattended while the engine is D: (drive) Used for general driving. running. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 129

Engine braking To utilise the engine braking effect, select L when driving downhill, if necessary. Engine braking is most effective in Press the release button to select drive range L. If drive range L is a gear. selected at too high a speed, the transmission remains in the current gear until the vehicle slows down. Note Use of engine compression during long mountainous descents may prolong the life of your brakes. Kickdown Press the brake pedal and press the release button to select a gear.

Shift freely to select a gear.

For faster acceleration: Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

130 Driving and Operating

. Press the accelerator pedal all Release shift lever If the shift lever still cannot be the way down and hold. moved from P (park), see Shift lock This vehicle is equipped with a shift manual release. The transmission shifts to a lock control. The shift lock control is lower gear ratio depending on designed to: Shift lock manual release the engine speed. . Prevent movement of the shift The automatic transmission has an Fault lever out of P (park) unless the electric park lock. The key must be ignition is in ON/RUN and the in the ON/RUN position and the In the event of a fault, * brake pedal is applied. brake pedal pressed so that the shift illuminates. The transmission no The shift lock control is always lever can be moved from the P longer shifts automatically or functional except in the case of a (park) position. manually because it is locked in a discharged battery. If the battery has discharged, the certain gear. To shift out of P (park): shift lever cannot be moved from P Contact a Holden Dealer. (park) unless the shift lock manual 1. Apply the brake pedal. release is disengaged manually. Interruption of Power 2. Turn the ignition to ON/RUN. To access the shift lock manual Supply 3. Press the shift lever button. release: If the power supply is interrupted, 4. Move the shift lever to the 1. Apply the park brake. the shift lever cannot be moved out desired position. of the P position. If still unable to shift out of P (park): If the battery is discharged, start the 1. Fully release the shift lever vehicle using jump leads. Jump button. Starting 0 183. 2. Hold the brake pedal down and If the battery is not the cause of the press the shift lever button fault, release shift lever and remove again. the ignition key from the ignition lock (vehicles with ignition switch). 3. Move the shift lever to the desired position. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 131

3. Insert a flat-blade screwdriver into the opening as far as it will Caution (Continued) go and move the shift lever out of P (park). When stopping the vehicle on an uphill gradient, do not hold the If P (park) is selected again, vehicle in place by pressing the the shift lever will be locked accelerator pedal. Use the foot again. Have the cause of the brake. problem fixed by a Holden Dealer. Press the brake pedal when shifting from P or N to R or a 4. Close the cover. forward gear.

2. Open the cover to the left of Caution the shift lever. To help prevent damage to the transmission, observe the following precautions. Do not press the accelerator pedal while shifting from P or N to R, D or L. Use D as much as possible. Never shift to P or R while the vehicle is in motion. (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

132 Driving and Operating Manual Transmission . When stopped on an incline, do Brakes not hold the vehicle stationary using the clutch. Use the park The brake system comprises two brake or foot brake. independent brake circuits. . Shift to a lower gear when If a brake circuit fails, the vehicle climbing steep gradients, before can still be braked using the other the engine starts to labour. brake circuit. However, braking effect is achieved only when the . Shift to a lower gear before brake pedal is pressed firmly. descending steep gradients. Considerably more force is needed . Do not over rev the engine when for this. The braking distance is shifting to a lower gear. extended. Contact a Holden Dealer. When the engine is not running, the Caution support of the brake servo unit is . When shifting from one gear to depleted once the brake pedal has It is not advisable to drive with the another, push the clutch pedal to been pressed once or twice. the floor. hand resting on the shift lever. Braking effect is not reduced, but braking requires significantly greater . Do not engage reverse gear force. It is especially important to while the vehicle is still moving. Caution bear this in mind when being towed. . Pause between pressing the Control indicator $. Brake and clutch pedal and moving into Don t hold the shift lever except ’ Clutch System Warning Light 0 60. reverse gear. when shifting and selecting. . Whenever reverse gear is Unnecessary shift lever selected with the ignition on, the movement can cause damage reverse lamps illuminate. inside the transmission. . Do not drive with your foot resting on the clutch pedal. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 133

Antilock Brake Operation { Warning System (ABS) ABS operation is noticeable by pulsing of the brake pedal and the After driving through water, ABS: washing the vehicle or using the noise of the regulation process. . Continuously monitors the brakes excessively such as when The initial self-check may also be vehicle's braking system, descending a steep hill, the audible. brakes can temporarily lose their preventing the wheels from Keep the brake pedal fully pressed stopping power. This may be due locking. throughout the braking process, to wet brake components or . Allows maximum braking effort without pumping it. overheating. Shift to a lower gear while full steering control is when going down hills. Do not retained, even in the event of continuously apply the brakes. panic braking. Caution If there is a malfunction with the To dry out the brakes: { Warning ABS, the vehicle’s brake system . Ensure there is a clear area Do not let this special safety remains operational, but without ahead. feature tempt you into taking risks ABS assistance. Have a Holden Dealer check the system as soon . Lightly apply the brakes. when driving. Traffic safety can only be achieved by adopting a as possible. . Maintain a slow forward speed responsible driving style. You until performance returns to should always adjust the vehicle's ! normal Control indicator . Antilock Brake speed to suit road and traffic System (ABS) Warning Light 0 61. conditions. Always maintain an adequate distance to the vehicle Adaptive brake light in front of you. During full braking, all three brake lights flash for the duration of ABS control. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

134 Driving and Operating

Fault Parking Brake { Warning

{ Warning Never drive the vehicle with the parking brake applied. If there is a fault in the ABS, the wheels may be liable to lock due to braking that is heavier than Brake and Clutch System Warning normal. The advantages of ABS Light 0 60. are no longer available. During hard braking, the vehicle can no Brake Assist longer be steered and may If the brake pedal is pressed quickly swerve. and forcefully, maximum brake force is automatically applied (full Have the cause of the fault braking). remedied by a Holden dealer. Applying the parking brake: Maintain steady pressure on the 1. Apply the parking brake firmly brake pedal for as long as full without engaging the release braking is required. Maximum brake button, and apply as firmly as force is automatically reduced when possible when on an uphill or the brake pedal is released. downhill gradient. Releasing the parking brake: Hill Start Assist (HSA) 1. Pull the lever slightly upwards. The system helps prevent unintended movement when driving 2. Push in the release button on away on inclines. the top of the lever and lower the lever all the way down. When releasing the foot brake after stopping on an incline, the brakes remain on for a further two seconds. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 135

The brakes release automatically as Ride Control Systems Control indicator G. Electronic soon as the vehicle begins to Stability Control (ESC) Indicator accelerate. Traction Control Light 0 62. System (TCS) Deactivation TCS improves driving stability when necessary, regardless of the type of road surface or tyre grip, by preventing the driving wheels from spinning. As soon as the driving wheels start to spin, engine output is reduced and the wheels are braked individually. This considerably improves the driving stability of the vehicle on slippery road surfaces. TCS is activated as soon as the ignition is turned on. TCS can be switched off when spinning of drive wheels is required: { Warning 1. Press g. Do not let this special safety i illuminates feature tempt you into taking risks when driving. To reactivate TCS: Adapt speed to the road 1. Press g again. conditions. TCS is also reactivated the next time the ignition is turned on. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

136 Driving and Operating

Fault ESC is operational as soon as the Deactivation If there is a fault in the system the control indicator d extinguishes. control indicator G illuminates When ESC is active d flashes. continuously and a message or a warning code appears in the Driver { Warning Information Centre. The system is not operational. Do not let this special safety Have the cause of the fault feature tempt you into taking risks remedied by a Holden dealer. when driving. Traffic safety can only be Electronic Stability achieved by adopting a Control (ESC) responsible driving style. The ESC: vehicle's speed should always be adjusted to suit road and traffic In certain circumstances, it may be . Improves driving stability in any conditions. helpful to disable the ESC, e.g. on driving situation. steep gravel inclines, or if the . Assists in maintaining vehicle vehicle is bogged. It may be stability when the vehicle's grip Control indicator G. Electronic possible to get more traction from a level is exceeded such as a Stability Control (ESC) Indicator slightly spinning wheel. 0 sudden lane change, slippery or Light 62. Automatic transmission: unexpected road conditions. 1. Press g for more than . Alters engine power and/or 5 seconds. braking on specific wheels, improving the vehicle's steering g illuminates on the instrument control and power delivery, on cluster. wet or slippery roads, The ESC is reactivated by particularly on snow and ice. pressing g again. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 137

Manual transmission: Object Detection { Warning 1. Press g. Systems The driver is always responsible g illuminates on the instrument Parking Assist for taking care and attention while cluster. manoeuvring the vehicle. Parking The ESC is reactivated by assist is only an aid and is neither pressing g again. intended nor able to take over any responsibility. Fault The park sensors may not be If there is a fault in the system the able to detect all objects under control indicator G illuminates every condition e.g. objects too continuously and a message or a close to the vehicle, objects warning code appears in the Driver above or below the sensors, Information Centre. The system is or objects with a surface that not operational. absorbs ultrasonic waves. Have the cause of the fault Additionally, some ambient remedied by a Holden dealer. conditions like ultrasonic waves The vehicle may have rear parking or heavy rain can cause assist. disruptive reflections from an Rear parking assist makes parking object's surface. Such objects easier by measuring the distance may not be detected. between the vehicle and rear Always manoeuvre the vehicle obstacles. It informs and warns the driver by giving acoustic signals and slowly to allow yourself sufficient display indication. time to react. The warning tones may not sound if the vehicle’s The system has three ultrasonic speed is above 10 km/h. parking sensors in the rear bumper. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

138 Driving and Operating

Activation Rear Vision Caution When reverse gear is engaged, the Camera (RVC) system is activated automatically. Performance of the system can The vehicle may have a rear vision An obstacle is indicated by an be reduced when sensors are camera. audible tone. covered, e.g. by ice, snow The rear vision camera (RVC) The interval between the tones or mud. system is designed to assist the becomes shorter as the vehicle gets driver when reversing by displaying closer to the obstacle. When the Notes on operation a view of the area behind the distance is less than 40 cm, the vehicle. tone sounds continuously. The system might not detect an obstacle when the vehicle is driven The RVC cannot display objects: Deactivation above 10 km/h. . Close to the corners of the The system automatically switches Performance of the parking assist vehicle. off when reverse gear is system can be reduced due to disengaged. heavy loading of the vehicle. . Forward of the camera. The parking assist can be turned off Special conditions apply if there are . Higher than the camera. in Vehicle Settings. Vehicle taller vehicles involved in the Note 0 Personalisation 70. parking scene (e.g. off-road . The distance of the objects seen vehicles). Object identification and Fault on the display differs from the correct distance indication of these actual distance. In the event of a fault in the system, vehicles cannot be guaranteed. X illuminates. . The area displayed depends on Objects with a very small reflection the road condition and vehicle Additionally, if the system does not cross section, such as narrow or orientation. work due to temporary conditions soft materials, may not be detected like snow covered sensors, X by the system. illuminates. Parking assist will not detect objects out of the detection range. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 139

Activation . Touch the symbol to hide the { Warning guidelines, touch to show the When the ignition is in the ON guidelines again. Never rely solely on the rear position and the vehicle is shifted vision camera when reversing the into R (Reverse), the rear vision ‐ The guidelines can also be vehicle. There are blind spots that camera image is displayed on the turned off in Settings. 0 cannot be sensed by the camera. infotainment display. Settings 106. Once the vehicle is shifted out of R, The rear vision camera is not { Warning intended to replace the driver’s the infotainment system display returns to the previous screen. judgement or attention toward the The driver is always responsible rear of the vehicle when Guidelines for taking care and attention while reversing. manoeuvring the vehicle. Before entering the vehicle, The camera display and always check that the area guidelines are only an aid and are around the vehicle is clear of neither intended to, nor able to obstacles and people. take over any responsibility. Always perform head checks and use the vehicle's mirrors when reversing. If the vehicle sustains any damage in the area of the rear vision camera, the camera may become misaligned. Contact your Holden Dealer. When the camera image is displayed, static guidelines are also displayed to assist with reversing the vehicle. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

140 Driving and Operating

Camera location . The rear of the vehicle is { Warning damaged. The position and mounting angle of the camera Do not use abrasive cleaners or can change or the camera can scouring pads as they could be affected. Have the camera scratch the lens, impairing the and its position and mounting systems performance. angle checked at your Holden Always keep the camera lens free dealer. from dirt, snow or ice. Only use mild soap and water with a soft cloth to clean the lens.

If the system does not operate properly The camera is located on the tailgate at the rear of the vehicle. The rear vision camera may not operate properly or display a clear Cleaning image if: The lens requires regular cleaning . It is dark. to ensure optimum performance. . The sun or headlight beams are Use only a soft cloth, mild soap and shining directly into the water. camera lens. . Ice, snow, mud, or anything else covers the camera lens. . There are extreme temperature changes. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 141 Driver Assistance For safety reasons, the cruise control cannot be activated until the { Warning Systems foot brake has been operated once. Do not use the cruise control Activating in first gear is not when road or driving conditions { Warning possible. require varying speeds. Driver assistance systems are A consistent speed isn't practical developed to support the driver in heavy, varying traffic or on winding, slippery or rough roads. and not to replace the driver’s attention. The cruise control does not apply The driver accepts full the vehicle's brakes. Therefore responsibility when driving the the vehicle may gain speed when vehicle. going down steep hills. When using driver assistance When climbing steep hills, the systems, always take care vehicle may lose speed. You may regarding the current traffic need to switch off cruise control situation. and use the accelerator pedal. Do not use the cruise control if it is Cruise Control not advisable to maintain a constant Switching on speed. The vehicle may have cruise control. Control indicator 5. Control 0 The cruise control system can Indicators 56. maintain a set speed above 40 km/h. Deviations from the stored speeds may occur when driving uphill or downhill. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

142 Driving and Operating

Press 5; the control indicator 5 in Increase speed Deactivation the instrument cluster illuminates With cruise control active, hold Press *; control indicator 5 in white. thumb wheel turned to RES/+ or instrument cluster illuminates white. Activation briefly turn to RES/+ repeatedly: Cruise control is deactivated and speed increases continuously or in the last used set speed is stored in 1. Accelerate to the desired small increments. memory for later speed resume. speed and turn the thumb wheel to SET/-: the current Alternatively accelerate to the Automatic deactivation: speed is stored and desired speed and store by turning to SET/−. . Vehicle speed is below approx. maintained. 40 km/h. 2. The control indicator 5 in the . The brake pedal is pressed. instrument cluster illuminates . The clutch pedal is pressed for a green. few seconds. 3. The accelerator pedal can be . The shift lever is in neutral. released. . Engine speed is in a very low Vehicle speed can be increased by range. depressing the accelerator pedal. When the accelerator pedal is . The Traction Control system or released, the previously stored Electronic Stability Control is speed is resumed. operating. Cruise control remains activated Resume stored speed while gear shifting. Reduce speed Turn thumb wheel to RES/+ at a With cruise control active, hold speed above 40 km/h. The stored thumb wheel turned to SET/- or speed will be obtained. briefly turn to SET/- repeatedly: speed decreases continuously or in small increments. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 143

Switching off Fuel Warning (Continued) Press 5, control indicator 5 in instrument cluster extinguishes. The { Warning . Whenever the exhaust stored speed is deleted. system, underbody or rear EXHAUST WARNING – of the vehicle is damaged. CARBON MONOXIDE Take the vehicle to a Holden POISONING: Exhaust gases can Dealer if you think the vehicle produce carbon monoxide, a needs inspecting for any of the dangerous gas which can cause above reasons. Do not sit (or unconsciousness and even death leave children or pets) in a parked in both humans and animals. vehicle for any extended period of Gases could be inhaled if the time with the engine running. Do exhaust system on your vehicle is not run the engine in an enclosed faulty. area (such as the garage) any longer than is needed to move To protect against exhaust gases the vehicle. entering the vehicle, the exhaust system and body should be Driving with the tailgate open is inspected: not recommended. If you must travel with the tailgate open, close . Each time the vehicle is serviced. all windows, ensure that the heater controls are set to outside . Whenever a change is (rather than recirculate) with air noticed in the sound of the directed to the face and the fan exhaust system. on the highest speed. Do not (Continued) exceed 50 km/h. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

144 Driving and Operating

{ Warning Caution (Continued) Caution (Continued)

FUEL fuel containing the manganese When purchasing such fuel, we Fuel is extremely flammable and additive known as MMT (methyl recommend that the vehicle be highly explosive. cyclopentadienyl manganese operated on fuel containing no tricarbonyl) be used, as this more than 10% ethanol. Always switch off the engine of additive is known to cause Under no circumstances should the vehicle and any mobile contamination of catalytic phones when refuelling. fuel containing more than 10% converters and spark plugs and ethanol be used. Use of such Do not smoke or allow open malfunction of fuels may result in engine flames or sparks near the vehicle On-Board-Diagnostic (OBD) malfunction, starting and when refuelling. If fuel fumes are systems. The use of fuel additives operating difficulties and materials smelt while driving, the cause that are not recommended by degradation. These adverse should be found and corrected Holden may affect your New effects could result in permanent without delay by a Holden Dealer. Vehicle Voluntary Warranty to the damage to the vehicle and extent that Holden considers that personal injury. It is also important the additives affect the to note that when ethanol blends specifications and quality of the Caution are used, fuel consumption can vehicle. be expected to increase due to FUEL ADDITIVES the lower energy content of ethanol. Various additives are used in the formulation of good quality fuel Caution The use of fuel containing more than 10% ethanol may also affect and the use of supplementary USE OF FUEL CONTAINING your New Vehicle Voluntary additives in fuel is not required ETHANOL unless specified by Holden. Warranty to the extent that Under no circumstances should (Continued) Holden considers that the fuel (Continued) (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Driving and Operating 145

Filling the Tank Caution (Continued) { Danger

affects the specifications and Fuel is flammable and explosive. quality of your vehicle. The use of No smoking. No naked flames or any fuel other than the fuel sparks. specified below may seriously If you can smell fuel in your damage the vehicle and may void vehicle, have the cause of this the warranty. Only clean fuel of remedied immediately by a good quality should be used. Holden dealer.

Fuel type 1. Stop the engine. Use unleaded petrol of regular 91 Research Octane Number (RON) rating or higher. { Danger Use of Premium unleaded petrol (95 RON or higher) may provide a small Before refuelling, switch off the improvement in performance and engine and mobile phones. fuel economy. Follow the operating and safety instructions of the filling station when refuelling.

2. Pull the fuel filler door release lever up. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

146 Driving and Operating

3. Turn the fuel filler cap Note anticlockwise slowly. If a If, in cold weather, the fuel filler door hissing sound is heard, wait for does not open, tap the door lightly. it to stop before completely Then try to open it again. unscrewing the cap. The fuel filler door is in the right Caution rear quarter panel. Wipe off any overflowing fuel immediately.

4. Remove the cap. The cap is tethered to the vehicle. 5. After refuelling, replace cap. Turn it clockwise until you hear one click. 6. Push the fuel filler door closed until it latches. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 147

Taillamps, Turn Signal, Towing the Vehicle Vehicle Care Stoplamps, and Reverse Towing the Vehicle ...... 185 lamps ...... 164 Side Turn Signal Lights ...... 165 Appearance Care General Information Licence Plate Lamp ...... 165 Exterior Care ...... 186 General Information ...... 148 Interior Lamps ...... 166 Interior Care ...... 188 Vehicle Storage ...... 148 Floor Mats ...... 189 Emission Information ...... 148 Electrical System Emission Control System . . . . . 148 Fuses ...... 166 Engine Compartment Fuse Vehicle Checks Block ...... 167 Doing Your Own Instrument Panel Fuse Service Work ...... 149 Block ...... 169 Bonnet ...... 150 Engine Compartment Vehicle Tools Overview ...... 152 Tools ...... 171 Engine Oil ...... 153 Engine Air Cleaner/Filter ...... 154 Wheels and Tyres Engine Coolant ...... 154 Wheels and Tyres ...... 172 Washer Fluid ...... 155 Tyre Pressure ...... 172 Brake Fluid ...... 156 Tread Depth ...... 172 Battery ...... 157 Tyre Rotation ...... 173 Wiper Blade Replacement . . . . 158 Buying New Tyres ...... 173 Wheel Covers ...... 174 Bulb Replacement Tyre Chains ...... 174 Bulb Replacement ...... 158 Tyre Sealant and Headlamps ...... 160 Compressor Kit ...... 174 Daytime Running Tyre Changing ...... 178 Lamps (DRL) ...... 161 Fog Lamps ...... 163 Jump Starting Front Turn Signal Lamps . . . . . 163 Jump Starting ...... 183 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

148 Vehicle Care General Information Disconnect the clamp from the photochemical smog. In addition, negative terminal of the vehicle CO is toxic when it becomes highly Where specified, use only Holden battery. concentrated in the air. genuine parts and accessories. Close the bonnet. Emission Control System Vehicle Storage Before returning the vehicle to the road: Major emission control systems that If the vehicle is to be stored for the vehicle may have are: several months: . Connect the clamp to the negative terminal of the vehicle 1. Evaporative emission control . Wash and wax the vehicle. battery. system. This system is designed to prevent the escape . Clean and preserve rubber Check the power windows seals. of fuel vapour from the fuel operation. system and recycle the . Change engine oil. . Check the tyre pressures. vapours through the normal combustion process. . Drain the washer fluid reservoir. . Fill the washer fluid reservoir. 2. Crankcase emission control . Check coolant and corrosion . Check the engine oil level. protection. system. This system is . Check the coolant level. designed to prevent blow-by . Adjust the tyre pressure to the gases from escaping into the value specified for a full load. Emission Information atmosphere and recycle them . Park the vehicle in a dry, well through the combustion The emission control systems are ventilated place. process. designed to reduce the amount of . Place the shift lever in P (park) hydrocarbons (HC), carbon 3. Exhaust emission control to prevent the vehicle from monoxide (CO), and oxides of system. The various moving. nitrogen (NOx) that are emitted from components of this system operate collectively to limit HC, . Do not apply the park brake. the engine and fuel system into the atmosphere. HC and NOx, when CO and NOx emissions in the . Open the bonnet, close all doors exposed to sunlight under certain exhaust gas. The exhaust and lock the vehicle. conditions, contribute to emission control system consists of components Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 149 including electronic control of Maintenance requirements Vehicle Checks spark, fuel and idle speed. In Have the vehicle serviced at the addition vehicles have a frequency shown in the catalytic converter and closed Doing Your Own Maintenance schedule, in the loop mixture control system. Service Work Service/Warranty Booklet. It is recommended that service and It is recommended that servicing be repair to fuel or emission systems { Warning carried out by an authorised Holden be carried out by an authorised Dealer who will maintain the Holden Dealer. Do not touch engine compartment vehicle's emission control system as components when the ignition is Owner responsibility per the Service/Warranty Booklet. on due to extremely high The engine, engine control system It is recommended that all fluid voltages. and exhaust system of the vehicle levels are checked weekly. must NOT be modified in any way. Note The cooling fan may still operate { Warning when the ignition is off. Any person who removes, modifies or hinders any part of the emission control system may be contravening Australian Design Rules. It is also illegal to drive a vehicle modified in this way. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

150 Vehicle Care

Bonnet { Warning Opening When the engine is hot, only touch the foam padding of the support rod.

3. Pull the support rod away from the bonnet holder. 4. Rotate down and place into the catch alongside the engine compartment. 2. Push the safety catch and open the bonnet. Closing

{ Warning 1. Pull the lever towards you. To avoid injury and/or damage to the vehicle, check each time, before the bonnet is closed, that the contact area is unobstructed.

1. Place the support rod into the bonnet holder. 2. Lower the bonnet and allow it to drop into the catch. 3. Check that the bonnet is engaged. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 151

{ Warning

If while driving you notice that the bonnet has not been properly closed, pull the vehicle over to the side of the road at the earliest possible moment and close the bonnet correctly. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

152 Vehicle Care

Engine Compartment Overview Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 153

1. Engine air filter 2. Engine oil filler cap 3. Dipstick for engine oil 4. Engine coolant reservoir 5. Brake/clutch fluid reservoir 6. Battery 7. Washer fluid reservoir 8. Fuse box

Engine Oil 4. Remove and read the oil level. 1. Rotate the engine oil filler cap anticlockwise and remove. Checking oil level The level should be at the MAX mark. Add oil if the level is at 2. Add enough oil to reach below . Check the engine oil level before the MAX mark on the dipstick. a long journey. the MIN mark. 5. Insert the dipstick to the stop 3. Check the level on the dipstick . The engine must be at operating and add further oil if necessary. temperature and the ignition on the handle and rotate half turned off for at least 5 minutes. a turn. The engine oil must not exceed the MAX mark on the dipstick. 1. Park the vehicle on a level Adding engine oil surface. Capacities and Specifications 0 195. Caution 2. Remove the dipstick and wipe clean. Overfilled engine oil must be 3. Insert the dipstick firmly. drained or suctioned out.

4. Replace the engine oil filler cap tightly by rotating clockwise. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

154 Vehicle Care

Note Engine oil change intervals Caution Non-detergent and other low quality Refer to the Service/Warranty oils, the use of break-in oil, tune up Booklet. Also refer to the engine oil Do not operate the vehicle compounds, friction reducing life system. Service without the filter installed. Engine compounds and other supplemental Information 0 190. additives are not recommended. damage may occur. Their use increases costs, may be Engine Air Cleaner/Filter detrimental to the operation of the Engine Coolant vehicle and may void the New Vehicle Voluntary Warranty, to the Engine coolant level extent that Holden considers the Check the coolant level at least non-recommended fluid to have once a week. affected the specifications or quality of the vehicle. Checking coolant level

{ Danger { Warning

Engine oil is an irritant and if Do not remove the radiator cap if ingested, can cause illness or the engine and radiator are still death. hot. Scalding fluid and steam can be blown out under pressure Keep out of reach of children. 1. Remove the two screws. which could cause serious burns. Avoid repeated or prolonged 2. Lift off the cover. contact with skin. 3. Replace the filter. Wash exposed areas with soap 4. Replace the cover and tighten and water or hand cleaner. the two screws. Be careful when draining the engine oil as it may be hot. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 155

Note Washer Fluid Use only approved coolant. Recommended Fluids and Lubricants 0 191. 1. Turn the ignition off. 2. Remove the coolant reservoir cap. 3. Add the required amount of coolant. 4. Replace the cap securely. If the coolant requires regular If the cooling system is cold, the topping up, contact a Holden coolant level should be above the Dealer. line on the coolant reservoir. Check the fluid level weekly. Adding coolant { Warning Adding washer fluid Avoid repeated or prolonged 1. Lift the front of the cap up. Caution contact with coolant. Use the correct amount of If the coolant level is too low, Wash off with soap and water. washer fluid additive. Refer to engine damage may occur. a Holden Dealer. Keep out of reach of children. Do not spill coolant on the Do not use ordinary soap or vehicle's exterior surfaces as it detergent as they froth up and can damage the paintwork. If you damage the wiper rubbers. do, wash it off immediately. 2. Secure the cap. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

156 Vehicle Care

Brake Fluid Checking brake fluid level 3. Rotate the brake fluid reservoir cap anticlockwise and remove. { Warning 4. Top up with the recommended brake fluid. Brake fluid is poisonous and corrosive and will damage the { Warning paint finish of the vehicle if spilt. Using brake fluid other than GM recommended brake fluid may cause corrosion to components of Caution the braking system and reduced Avoid contact with eyes and skin. braking performance. Wash any affected area Use only new brake fluid. Use of immediately. old, used or inferior brake fluid Check the brake fluid level weekly. may endanger the functioning of The level should be between the the brake system. For manual transmission vehicles, MIN and MAX area. the brake fluid reservoir also supplies the clutch system. If the fluid level is correct, do not 5. Secure the cap and clean up remove the reservoir cap, as brake any spilt fluid. fluid exposed to the atmosphere will quickly absorb moisture. If the brake fluid requires regular topping up, contact a Adding brake fluid Holden Dealer immediately. Recommended Fluids and Lubricants 0 191. 1. Turn the ignition off. 2. Wipe the sides of the cap clean. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 157

Battery disconnection Caution Warning (Continued) The battery may discharge if the Do not dispose of used brake Keep batteries out of the reach of vehicle is not used for fluid with household waste. children. approximately four weeks. Use the local, authorised waste Take care with all metal objects To disconnect the battery: management facility. and tools including items you may 1. Turn the ignition off. wear (for example jewellery, rings 2. Disconnect the clamp from the and metal watch bands) near negative terminal of the vehicle Battery battery terminals. battery. { Warning Ensure the ignition is turned off Battery replacement before reconnecting the vehicle Batteries emit an explosive gas For battery location, Engine battery. mixture which may be ignited. 0 Compartment Overview 152. For emergency starting when the Therefore, you should keep For replacement, refer to a Holden battery is flat. Jump Starting 0 183. sparks and flames away from the Dealer or authorised repairer. battery at all times. Never smoke near a battery. Caution Batteries contain sulphuric acid. If acid contacts skin or clothing, Do not dispose of batteries with flush immediately with plenty of household waste. water. In case of eye contact, Use the local, authorised waste flush with plenty of water and management facility. contact a doctor immediately. Battery acid also damages paint and fabrics. To minimise damage, wash off immediately. (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

158 Vehicle Care Wiper Blade Replacement Rear wiper Bulb Replacement Front wiper Contact a trained service technician if unsure about the bulb replacement process. When replacing bulbs: . Turn the ignition off and remove the key. . Turn off related switches. . Fit bulbs of the specified wattage only. . Do not touch bulbs or reflectors 1. Lift the wiper arm. with bare hands. 2. Push the wiper blade, slightly . Clean stained bulbs with Regularly check the condition of the angled to the wiper arm, methylated spirits. wiper blades. downwards until it disengages. Bulbs to be changed by a 1. Lift the wiper arm. For wiper blade cleaning. Exterior Holden Dealer 0 2. Press the release lever and Care 186. . Centre high-mounted brake detach the wiper blade. lamp (LED) For wiper blade cleaning, Exterior Care 0 186. Caution

Condensation may temporarily appear on the inside of exterior lamp lenses after rain or washing (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 159

Replacement Bulbs Caution (Continued) Exterior Lamp Bulb Type Wattages the vehicle. Condensation occurs when there is a temperature Headlamps low and high beam H4LL 60 / 55W difference between the inside and DRL/Park lamps W21/5WLL 21/5W outside of the lamp allowing a fine Front fog lamps PSX24W 24W mist on the inside surface of the lamp lens. This condensation will Front turn signal lamps PY21W 21W disappear when the vehicle is in a Side turn signal lamps WY5W 5W dry environment or the lamp is on. If water does collect in the lamp Rear Tail/Brake lamps P21WLL 21W contact a Holden Dealer. Rear turn signal lamps PY21W 21W Reverse lamps P21W 21W Number plate lamps W5WLL 5W Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

160 Vehicle Care

Headlamps 4. Push the retaining tab and then remove the electric connectors Low and high beam from the headlamp. 5. Remove the headlamp assembly.

2. Remove the three screws. 3. Pull the headlamp assembly forward far enough to access the electrical connectors. 1. Rotate the washer funnel anticlockwise to disengage. 6. Remove the protective cover. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 161

9. Fit the new bulb by engaging Daytime Running the lugs in the recesses on the reflector. Lamps (DRL) 10. Engage the spring clip. Position/Daytime Running Light 11. Place the headlamp protective cover into position and close. 12. Position the headlamp assembly on the vehicle. 13. Attach the electrical connectors onto the bulbs. 14. Install the three headlamp 7. Press the spring clip to screws. disengage. 15. Rotate the washer funnel clockwise to engage. Headlamp aiming If the headlamps require 1. Turn the front wheels and adjustment, contact a Holden remove 2 push nuts on outside Dealer. of wheel liner.

8. Remove the bulb from the reflector housing. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

162 Vehicle Care

2. Disconnect the electrical 6. Reinstall the bulb holder into 7. Reconnect the electrical connector from the bulb holder. the lamp and rotate it clockwise connector and ensure the 3. Rotate the bulb holder until the centre of the bulb locking pin is placed correctly. anticlockwise and remove from holder is placed at the arrow 8. Replace the two push nuts. shape on the lamp. the lamp. 9. Check lamp operation. 4. Pull the bulb out of the bulb holder. 5. Insert a new bulb into the holder. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 163

Fog Lamps Front Turn Signal Lamps

2. Disconnect the electrical connector from the bulb holder. 1. Turn the front wheels and 3. Press the tabs and remove the 1. Rotate the bulb holder remove 2 push nuts on outside bulb holder from the lamp. anticlockwise to disengage. of wheel liner. 4. Pull bulb out of the bulb holder. 5. Install a new bulb into the holder. 6. Reinstall the bulb holder into the lamp and ensure it locks in place. 7. Reconnect the electrical connector. 8. Check lamp operation. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

164 Vehicle Care

2. Push the bulb into the socket 2. Remove the tail lamp slightly and rotate assembly. anticlockwise to remove. Note 3. Insert a new bulb. Make sure the cable duct remains in 4. Place the bulb into the socket position. and rotate clockwise. 5. Replace the bulb holder and rotate clockwise to engage. 6. Check lamp operation. Taillamps, Turn Signal, 3. Rotate the applicable bulb Stoplamps, and Reverse holder anticlockwise. lamps

. Tail lamp/brake lamp (1) . Turn signal lamp (2) . Reverse lamp (3)

1. Remove the two screws. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 165

4. Push the bulb into the socket 1. Push the lamp towards the 1. Unscrew the two screws. slightly and rotate front of the vehicle and 2. Remove the bulb housing by anticlockwise to remove. remove. pulling downwards. 5. Insert a new bulb. 2. Rotate the bulb holder Do not pull on the cable. 6. Insert the bulb holder into the anticlockwise and remove from the lamp. 3. Rotate the bulb holder tail lamp assembly and rotate anticlockwise to disengage. clockwise. 3. Pull bulb out of the bulb holder. 4. Remove the bulb from the 7. Install the tail lamp assembly 4. Insert a new bulb into the holder. into the body and tighten the holder. 5. Insert a new bulb. screws. 5. Reinstall the bulb holder into 8. Check lamp operation. the lamp and rotate it 6. Insert the bulb holder into the clockwise. bulb housing and rotate clockwise. Side Turn Signal Lights 6. Reinstall the lamp. 7. Insert the bulb housing and Licence Plate Lamp replace the two screws. 8. Check lamp operation. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

166 Vehicle Care Interior Lamps Electrical System Courtesy lamps Fuses

{ Warning

Turn off the ignition and any electrical equipment before changing a fuse.

. Replace blown fuses promptly. Type 2 . A blown fuse can be recognised 1. Using a flat-blade screwdriver, by its melted wire. prise the lamp assembly . Do not replace the fuse until the Type 1 outwards, from the side cause of the fault has been opposite the lamp switch. remedied. 2. Remove the bulb. . Some functions are protected by 3. Insert a new bulb. several fuses. 4. Reinstall the lamp assembly . The vehicle may not be firmly into place. equipped with all of the fuses, 5. Check lamp operation. relays and features shown. Fuse extractor A fuse extractor is located in the fuse box in the engine compartment. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 167

Place the fuse extractor on the top Engine Compartment Engine compartment fuse box or side of the fuse to extract the fuse. Fuse Block Replace the fuse cover securely after use.

{ Warning

Ensure a replacement fuse is the correct amperage. Never install a wire or similar as it could damage electrical components and cause a fire. Any improper alterations to the electrical system may cause a fire 1. To disengage the cover, lift hazard and engine damage. To upwards and remove. maintain your own safety and that of the vehicle, have any work Note involving the electrical system or . Not all fuse box descriptions the replacement of high current may apply to your vehicle. fuses or relays carried out by a . When inspecting the fuse box, Holden Dealer. refer to the fuse box label inside the cover.

Fuses No. Circuit 1 Tailgate latch Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

168 Vehicle Care

No. Circuit No. Circuit No. Circuit 2 - 21 Intelligent battery sensor 39 Cornering lamp right 3 Rear demist 22 Electric steering 40 - 4 Outside rear view mirror column lock 41 - heater 23 Cooling fan low 42 Starter 2 5 Sunroof 24 - 43 In-panel bussed electric 6 CVT control module 25 Outside rear view mirror centre 7 Mass air flow sensor switch 44 Automated manual 8 Auxiliary heater pump 26 ECM/Automated manual transmission/DC-DC transmission module converter 9 ABS valve 27 Canister vent solenoid 45 Starter 1 10 Regulated voltage control 28 Brake pedal switch 46 Antilock brake 11 Rear view camera 29 Auxiliary occupant sensing system pump 12 - 30 Headlamp levelling motor 47 Cooling fan HI 13 - 31 Horn 48 Front wiper motor 14 ECM/TCM 32 Front fog lamp 49 In-panel bussed electric 15 FICM / Starter centre accessory/RAP 33 High beam left power 16 Fuel pump motor 34 High beam right 17 ECM 1 Relays 35 - 18 ECM 2 No. Circuit 36 Rear wiper motor 19 Injector, Ignition 1 Rear demist relay 37 Cornering lamp left 20 A/C system 2 TCM relay 38 Washer pump motor 3 Fuel pump motor relay Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 169

No. Circuit Instrument Panel Fuse Note Block Not all fuse box descriptions may 4 STRTR SOL2 relay apply to your vehicle. 5 Air conditioning clutch relay Instrument panel fuse box 6 Auxiliary heater pump relay 7 Fan lo relay 8 RUN/CRNK relay 9 PWR/TRN relay 10 STRTR SOL1 relay 11 Fan HI relay 12 Front fog lamp relay

The interior fuse box is located on the underside of the driver side of the instrument panel. To remove the cover: 1. Pull the fuse panel door out at the bottom to unclip. To replace the cover: 1. Locate the fuse panel door at the top. 2. Push the fuse panel door in at the bottom to secure the clips. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

170 Vehicle Care

Fuses No. Circuit No. Circuit No. Circuit 16 Discrete logic ignition 34 Body control module 2 (Non 1 Onstar switch (Non CVT stop & CVT stop & start) 2 HVAC module start) 35 Body control module 1 (Non 3 Instrument panel cluster 17 Front collision avoidance CVT stop & start) 4 Continuously Variable 18 Instrument panel cluster 36 Discrete logic ignition transmission control module 19 Reflected LED Alert Display switch (CVT stop & start) 5 Radio 20 Headlamp levelling switch 37 Steering wheel controls backlighting 6 Body control module 1 21 Front power window (CVT stop & start) 38 - 22 Rear power window 8 Data link connection 39 Logistic/DC-DC converter 23 - 9 Electric steering 40 Driver express power 24 Automated manual column lock window transmission module 10 Sensing and Diagnostic 41 Blower motor 25 Auxiliary power outlet module 42 Front heated seat 26 Sunroof 11 DC-DC converter 43 HVAC module 27 - 12 - 44 Heated steering wheel 28 Body control module 8 13 Electronic toll collection 45 Body control module 2 system 29 Body control module 7 (CVT stop & start) 14 Linear power module 30 Body control module 6 Relays 15 Passive entry & passive 31 Body control module 5 No. Circuit start 32 Body control module 4 1 Logistic relay 33 Body control module 3 2 ACC/RAP relay Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 171

No. Circuit Vehicle Tools The jack and tools are located in a tool kit, in the load compartment, 3 IRAP relay Tools above the spare wheel. 4 RUN relay Tyre repair kit The vehicle may have an emergency tyre sealant and compressor kit in place of a spare tyre. The tools, tyre sealant and compressor kit are located below the floor cover, in the load compartment. Spare tyre

The vehicle may have a spare tyre. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

172 Vehicle Care Wheels and Tyres . Tyre pressure should be The correct pressures for tyres are checked when cold as tyre shown on the tyre placard in the Tyre and rim condition pressure will increase as the driver’s door frame and in the tyre tyres warm up. pressure table. . Do not drive over sharp edges to avoid tyre and rim damage and . Check the air pressure of tyres Tyre Pressure 0 196. possible tyre blowout. (including the spare) weekly to . Always inflate the spare tyre to ensure occupant safety, as well . Drive over edges slowly and at the pressure specified for as reducing fuel consumption maximum load. right angles, if possible. and increasing the life of the . When parking, ensure the tyres tyres. . Use the ECO tyre pressure for are not pressed against the fuel economy driving at . Replace any valve dust caps or normal load. edge of the curb. extensions. . Check the tyres regularly for damage, stones, punctures, Tyre placard Tread Depth cuts, cracks, bulges etc. Check Check tread depth at regular the rims for damage. Contact a intervals. Holden Dealer, if in doubt. Tyre Pressure Keep the tyres at the recommended pressures to avoid increased fuel consumption, uneven and premature tyre wear. The correct pressures are shown on the tyre placard and in the tyre pressure table. Tyre Pressure 0 196. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 173

. Replace the tyres when they are Tyre Rotation New tyres should be fitted in pairs to worn to the point where the the front. If replacing only one tyre, tread wear indicators (TWI) It is recommended that you rotate pair it on the same axle with the appear. tyres at every scheduled least worn of the other three. maintenance service. The tyres originally fitted to the vehicle have built in TWI. These Driving conditions, driving Buying New Tyres techniques, vehicle loading and show as plain bars across the Refer to the tyre placard on the weather may warrant more frequent tread pattern at regular intervals vehicle for tyre size and load rating. across the tyre. tyre checks and rotation. Using a different size or type of tyre . If there is more wear on the front may affect: tyres than on the rear tyres, swap the front and rear wheels. . Ride . Tyres age even if they are not . Handling used. Replacement of tyres . Speedometer accuracy every six years is recommended. . Vehicle ground clearance { Warning . Tyre clearance . Snow chain clearance Do not attempt to drive on a flat tyre more than is necessary to { Warning stop safely. Driving even a short distance can damage the tyre and Front and rear tyres can wear Do not use different sizes or wheel beyond repair. Tyres which differently depending on: types of tyres and wheels than have been repaired or retreaded . Types of roads driven on those originally fitted to the are not capable of being driven vehicle. Safety and performance safely at high speeds. Therefore, . Driving habits (Continued) their use is not recommended. . Tyre pressures . Wheel alignment and balance Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

174 Vehicle Care

Tyre Chains Warning (Continued) { Warning

of the vehicle may be affected. Tyre chains may only be used at It may also affect road handling speeds up to 50 km/h. Tyre and lead to serious injury. chains should only be used for When replacing tyres, install all short distances if the roads are four tyres and wheels of the same not snow covered. The hard road size, type, tread, brand and surface causes rapid wear and load-carrying capacity. the chain may break. Tyre chain links should not be thicker than 10 mm and the clasp should be Wheel Covers well away from the bodywork. Thicker chains may damage the Use wheel covers and tyres that are vehicle body. factory approved for the vehicle and Tyre chains are only permitted on which comply with all of the relevant the front wheels. wheel and tyre combination Tyre Sealant and requirements. Always use fine mesh chains that add no more than 10 mm to the tyre Compressor Kit { Warning tread and the inboard sides, The vehicle may have an including the chain lock. emergency tyre sealant and Use of incorrect tyres or wheel Tyre chains are only permitted on compressor kit, in place of a covers may result in damage to tyres of size 165/65 R14. spare tyre. the vehicle and personal injury. Tyre chains are not permitted on The repair kit: tyres of size 185/55 R15 and 195/ . Repairs minor damage to the 45 R16. tyre tread or sidewall. The use of tyre chains is not Do not remove any objects that permitted on the temporary spare have penetrated the tyre. wheel. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 175

. Repairs damage up to 4 mm in Temporary puncture repair the tread area of the tyre. 1. Apply the park brake. . Does not repair damage at the 2. Place the shift lever into either tyre s side wall, near the rim. ’ first or reverse gear, or P. Take the vehicle to a Holden Dealer 3. Remove the tyre repair kit from to have the tyre repaired or replaced the compartment under the as soon as possible. floor cover in the load compartment. { Warning 4. Remove the compressor and Do not drive faster than 80 km/h. the sealant bottle. Do not drive on the repaired tyre 6. Place the switch on the for an extended time. Steering compressor to 9. and handling may be affected. 7. Shake the sealant bottle to mix the sealant. Note . If unusual noises are heard or 8. Screw the compressor air hose the compressor becomes hot, to the connection on the turn the compressor off for at sealant bottle. least 30 minutes. 9. Connect the compressor plug . Check the expiry date on the to the accessory socket. tyre sealant canister before use. 10. Start the engine and let it idle The tyre sealant canister must to ensure the battery does not be replaced before its 5. Remove the electrical run down. expiry date. connection cable (A) and air hose (B) on the underside of . The compressor and sealant can the compressor. be used from approximately –30 °C to 70 °C. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

176 Vehicle Care

Note 15. Press the switch on the If the engine is running, ensure that compressor to I. neutral or P is selected and that the The tyre fills with sealant. parking brake is firmly applied. The compressor pressure gauge briefly indicates up to { Warning 88 psi / 600 kPa while the Do not run the engine in an sealant bottle is emptying enclosed area or with passengers (approx. 30 seconds). in the vehicle. Engine The pressure starts to drop. 0 Exhaust 127. Once the sealant is pumped into the tyre, the tyre is inflated. 13. Unscrew the valve cap from 11. Place the compressor near the 16. The tyre pressure the defective tyre. tyre so that the sealant bottle is (approximately 33 psi / upright. 14. Screw the filler hose to the tyre 230 kPa) should be obtained 12. Fit the sealant bottle into the valve. within 10 minutes. retainer on the compressor. 17. When the correct pressure is obtained, switch off the compressor.

{ Warning

Do not over-inflate tyres due to risk of injury or damage to the tyre. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 177

18. If the tyre pressure is not 23. Remove any excess sealant obtained within 10 minutes: Warning (Continued) using a cloth. 18.1. Remove the tyre tyre. Disconnect and stow the tyre 24. After inflating the tyre, remove repair kit. sealant and air compressor kit the maximum speed label and 18.2. Move the vehicle one tyre back in its original position. place it in a visible location. rotation. Contact a Holden Dealer. It reminds you to drive 18.3. Reattach the tyre repair cautiously and not to exceed kit and continue the filling 19. Detach the tyre repair kit. 80 km/h until the damaged tyre is replaced or repaired. procedure for 10 minutes. 20. Push the catch on the bracket Do not run the to remove the sealant bottle 25. Continue driving immediately compressor longer than from the bracket. so that sealant is evenly distributed within the tyre. 10 minutes. 21. Unscrew the tyre inflation hose 18.4. Drain excess tyre from the sealant bottle. This 26. After driving approximately pressure with the button prevents sealant from 10 km (but no more than near the pressure escaping. 10 minutes), stop at a safe indicator. location to check the tyre 22. Stow the tyre sealant and air pressure. compressor kit in the load { Warning compartment. If the recommended pressure cannot be reached after { Warning approximately 10 minutes, the Always stow the tyre sealant and vehicle should not be driven. The air compressor kit in its original tyre is too severely damaged and position. Unsecured loads the tyre sealant and air increase the risk of injury during compressor kit cannot inflate the heavy braking, sudden avoidance (Continued) manoeuvres or a collision. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

178 Vehicle Care

30. Dispose of the used tyre sealant canister at a Holden Warning (Continued) Dealer or in accordance with local and State codes and Use the jack only at the practices. Replace with a new designated lifting points. Use in canister. other locations may result in the vehicle falling off the jack, 31. Stow the tyre sealant and or damage to the vehicle. compressor kit in the load compartment. Do not start or run the engine while the vehicle is supported by This is a temporary puncture repair. the jack. Take the vehicle to a Holden Dealer to have the tyre repaired or replaced Use the jack only for lifting the 27. Screw the compressor air hose as soon as possible. vehicle when changing wheels. directly onto the tyre valve and compressor to check the tyre Tyre Changing Do not get under a vehicle that is pressure. supported by a jack. No person The vehicle may have a spare tyre. should place any portion of their 28. If the tyre pressure is more body under a vehicle that is than 19 psi / 130 kPa, set it to the correct value (approx. { Warning supported by a jack. 33 psi / 230 kPa). The vehicle may have a steel All passengers must be out of the temporary spare wheel. Drive 29. Repeat the procedure from vehicle when it is being jacked. Step 25 until there is no more carefully and do not exceed loss of pressure. Only jack the vehicle on hard, 80 km/h. Although the spare tyre level surfaces. was fully inflated when the vehicle If the tyre pressure has fallen was new, it can lose air over time. below 19 psi / 130 kPa, do not Ensure moving parts of the jack Check the inflation pressure continue driving. Contact a are adequately lubricated regularly. Holden Dealer. before use. (Continued) (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 179

The spare tyre is located in the load 10. Undo the wing bolt. Warning (Continued) compartment beneath the floor covering. After installing the spare tyre on the vehicle, stop as soon as 1. Park on a hard, level surface, possible to check the inflation in a safe location. pressure is correct. Have the flat 2. Apply the park brake firmly. tyre repaired or replaced and 3. Place the shift lever into installed back on the vehicle as reverse gear or P. soon as possible. 4. Switch the hazard warning flashers on. 5. Remove the ignition key. { Warning 6. Chock the wheel diagonally Do not drive faster than 80 km/h. opposite the flat tyre with a 11. Remove the spare wheel from suitable solid object. the load compartment: 7. Remove the rear parcel tray. Lift from the forward face to Information on Loading the remove, not from the rear. Vehicle 0 48. 12. Remove the wheel cover, 8. Fold down the rear seatback if fitted. on the driver side: Using the screwdriver supplied Pull the release knob upwards in the tool kit, carefully prise and fold. the cover off in several places. 9. Remove the tools from the load Note compartment. . The screwdriver tip is Lift from the forward face to double-ended; ensure the remove, not from the rear. flat tip is used. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

180 Vehicle Care

. To protect the wheel cover, wrap a cloth around the screwdriver.

14. Position the jack beneath the 16. Attach the jack handle to the jack location closest to the jack and attach the wheel wheel being changed. wrench to the jack handle. The locations are identified by 17. Wind the jack up by hand until 13. Place the wheel wrench over cut-outs in the underside of the it engages with the jacking the wheel nuts and loosen by door sill. point. half a turn, but do not remove the wheel nuts. 15. Rotate the jack handle to raise Ensure the jack is not tilted and the head slightly. the base is resting squarely on the ground.

{ Warning

Failure to position the jack as described could cause the vehicle to slip off the jack. (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 181

20. Exchange the wheel on the 25. Reinstall the wheel cover, Warning (Continued) vehicle with the spare wheel. if fitted. Do not get under a vehicle that is 21. Clean the wheel nuts and Align the cutout with the tyre supported by a jack. No person thread before replacing, then valve and while holding the should place any portion of their lightly tighten with the wheel cover in position, tap around body under a vehicle that is nut wrench. the circumference with supported by a jack. 22. Lower the vehicle by reversing your hand. the jacking procedure. Note 23. Remove the jack from under Ensure the cover is securely the vehicle. attached around the entire circumference. 26. Replace the flat tyre and tools in the load compartment. 27. Lift the rear seatback upwards and push firmly back into place. 28. Have the flat tyre replaced or repaired.

{ Warning 18. Rotate the wrench, checking the correct position of the jack, As soon as possible after changing a wheel, have the wheel until the wheel is clear of the 24. With the wheel on the ground, ground. use the wheel nut wrench to nuts tightened with a torque 19. Unscrew the wheel nuts and tighten the wheel nuts in the wrench to 140 Nm (Newton place in a clean, dry place. sequence shown. metres). Wheel nuts must be (Continued) Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

182 Vehicle Care

Warning (Continued)

tightened evenly to the correct torque, as wheel nuts which have not been tightened properly could eventually allow the wheel to come off while the vehicle is moving.

Storing a replaced wheel in the load compartment using a strap 3. Place the loop end of the strap 5. Return the seatbacks to their through the seatback latch. normal position. Use the strap located in the tool kit. 4. Place the hook end of the strap 6. Thread the strap through the Vehicle tools. Tools 0 171. through the loop and pull it until spare wheel as shown and 1. Lift up load compartment floor. the strap is fastened securely attach the hook to the tailgate Position the tool kit and the to the seatback latch. latch. damaged wheel to stand 7. Tighten the strap and secure it upright in the load using the buckle. compartment. 2. Pull the release knob on top of the rear seatback upwards and fold the seatback forwards. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 183

Jump Starting Warning (Continued) Warning (Continued) Read the following warnings and procedure in full before attempting burns. Therefore, adhere to the . Wear eye protection such to jump start the vehicle. following when working near a as safety glasses and avoid battery: leaning over the battery. If you are still unsure about jump starting, Holden strongly . Do not attempt jump starting . Battery acid is corrosive. If it recommends for your safety and directly from the battery in gets on your skin, wash with that of the vehicle that you seek the the engine compartment. plenty of water immediately. If it gets in your eyes you assistance of a suitably trained . Do not let the jumper lead service technician. should not only flush with clamps touch each other or lots of water, but should other metal parts. also seek medical help. { Warning . Do not allow the jumper Battery acid also damages leads to contact any rotating paint and fabrics. To Do not push start or tow start the engine components. minimise damage, wash it vehicle. If unburnt fuel were to off immediately. reach the catalytic converter and . Do not use open flames or ignite, the converter could sparks near the battery. . Remove rings, metal watch overheat or be destroyed by . Do not smoke near the bands and other metal backfire. Therefore, if the battery battery. jewellery before working is flat, jump start, but do not push around the battery. . Never use a quick charger start the vehicle. to start the engine. . If a permanently connected Batteries produce explosive hands free telephone kit is . The battery must be fitted to the vehicle, remove gases, contain corrosive acids removed from the vehicle the fuse for the telephone and supply levels of electrical for recharging. kit before jump starting. current high enough to cause (Continued) Remember to replace the (Continued) fuse afterwards. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

184 Vehicle Care

. A discharged battery can freeze 5. Turn off all lamps and 9. Connect the other end of the at temperatures of 0 °C. accessories in both vehicles, BLACK lead to a vehicle Defrost the frozen battery before except the hazard warning grounding point, such as the connecting jumper leads. flashers or any lights needed engine block or an engine for the work area. mounting bolt (4). . Use a booster battery with the same voltage (12 volts). Its Connect as far away from the capacity (Ah) must not be much discharged battery as possible less than that of the discharged (at least 60 cm). battery. Note . Use jumper leads with insulated Route the leads so that they cannot terminals and a cross section of catch on rotating parts within the at least 16 mm². engine compartment. . Do not disconnect the 10. Start the engine of the vehicle discharged battery from the providing the jump start and vehicle. allow to idle for at least 5 minutes. . Switch off all unnecessary electrical devices. 11. Start the engine of the vehicle 6. Connect one end of the RED with the flat battery. . The vehicles must not come into lead to the positive terminal of contact with each other during the booster battery (1). Start attempts should be made the jump starting process. for no longer than 15 seconds 7. Connect the other end of the at an interval of 1 minute. 1. Position the two vehicles so RED lead to the positive that they are not touching. terminal of the discharged 12. Allow both engines to idle for battery (2). approximately 3 minutes with 2. Apply the park brake. the leads connected. 3. Place the shift lever in neutral. 8. Connect the BLACK lead to the negative terminal of the 4. Turn the ignition off. booster battery (3). Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 185 13. Switch on the headlamps and Towing the Vehicle Standard tow truck the heated rear window of the If a flat-bed tow truck is not vehicle that received the jump Flat-bed tow truck available: start. 14. Leave the engines running while removing the BLACK negative jumper lead first, followed by the RED positive jumper lead. Note While removing each clamp, do not touch any other metal while the other end remains attached.

A flat-bed tow truck is the best 1. Use a standard tow truck, method of towing the vehicle to where the front wheels are avoid damage. raised and the rear wheels are When loading onto a flat-bed tow in contact with the ground. truck, only use the rear towing eye to pull the vehicle.

Caution

To prevent damage, do not use the front lashing points for towing the vehicle. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

186 Vehicle Care Appearance Care touching the paint (other than water). The wipers must be switched off. Remove the antenna Exterior Care and external accessories. Washing If you wash your vehicle by hand, The paintwork of the vehicle is ensure the insides of the wheel exposed to environmental housings are also thoroughly influences. Wash and wax regularly. rinsed out. When using automatic vehicle Clean edges and folds on opened washes, select a programme that doors and the bonnet as well as the includes waxing. areas they cover. 2. Alternatively, use a standard Bird droppings, dead insects, resin, Have the door hinges of all doors tow truck and a towing dolly to pollen and the like should be greased by a Holden Dealer. prevent the front wheels from cleaned off immediately, as they contacting the road. contain aggressive constituents Caution which can cause paint damage. Failure to do so may result in Caution Do not clean the engine permanent damage, particularly in compartment with a steam-jet or If the vehicle is towed with the hot weather conditions. high-pressure jet cleaner. front wheels contacting the road, Road bloom is a gradual build up of the vehicle’s drive system could road and environmental grime. This Thoroughly rinse and chamois off be severely damaged. should be removed with a paint the vehicle. Rinse the chamois cleaner once a year, in addition to frequently. Use a separate chamois normal washing. for painted and glass surfaces: If using a vehicle wash, comply with remnants of wax on the windows the vehicle wash manufacturer's will impair vision. instructions. Never use an automatic wash that requires anything Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 187

Do not use hard objects to remove Polishing is necessary only if the spots of tar. Use tar removal spray Caution paint has become dull or if solid on painted surfaces. deposits have become attached Condensation may temporarily to it. appear on the inside of exterior { Warning lamp lenses after rain or washing Paintwork polish with silicone forms the vehicle. Condensation occurs a protective film, making waxing Take care when moving the unnecessary. vehicle after washing, in case when there is a temperature water has affected the brakes. difference between the inside and Plastic body parts must not be Applying the brakes lightly will outside of the lamp allowing a fine treated with wax or polishing indicate whether they have been mist on the inside surface of the agents. affected. To dry them quickly, lamp lens. This condensation will Windows and windscreen disappear when the vehicle is in a lightly apply the brakes while wiper blades maintaining a slow forward speed dry environment or the lamp is on. with a clear area ahead, until If water does collect in the lamp Use a soft lint-free cloth or chamois leather together with window brake performance returns to contact a Holden Dealer. cleaner and insect remover. normal. Air intakes . Never use abrasive cleaners to clean glass. Exterior lamps Clear debris from the air intakes, between the bonnet and . Refer to a Holden Dealer for Headlamp and other lamp covers windscreen washer additive. are made of plastic. Do not use any windscreen, and below the front abrasive, solvent based cleaners or bumper when washing the vehicle. . Old wiper blades can cause windscreen scratching. caustic agents and do not Polishing and waxing dry-clean them. Regularly inspect and Wax the vehicle regularly (at the replace them. latest when water no longer beads). Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

188 Vehicle Care

Paintwork damage Interior Care Caution Rectify minor paintwork damage Do not operate the wiper blades with a touch-up pen before rust { Warning by hand as this damages the forms. Many cleaning products are toxic, wiper drive mechanism. Have more extensive damage or flammable or may damage the rust areas repaired by your Holden interior. When cleaning the Dealer. When cleaning the rear window, interior, avoid volatile cleaners make sure the heating element such as acetone, lacquer inside is not damaged. Caution thinners, enamel reducers, nail Clean smearing wiper blades with a Do not spill coolant on the polish removers, or cleaners such soft cloth and window cleaner. vehicle’s exterior surfaces as it as laundry soaps, bleaches or Wheels and tyres can damage the paintwork. If you reducing agents. Never use do, wash it off immediately. carbon tetrachloride, petrol or Do not use high-pressure jet naphtha for any cleaning purpose. cleaners. Ensure that the vehicle is well . Remove oil and grease with Underbody ventilated while using any soap and water or detergent. Substances can cause rust under cleaners and always follow the cleaning product manufacturer's . Do not use petrol to clean tyres. the vehicle. recommendations. Water based . Hose the underbody with clean . Use a good quality tyre and cleaners, rather than solvent bumper shine if required. water whenever the vehicle is washed. based cleaners, are . A good quality wheel cleaner recommended. . Where the vehicle is exposed to can be used for cleaning alloy Steam cleaning of seats is not wheels. heavy concentrations of corrosive materials, inspect and recommended. . Do not use abrasive cleaners. wash the complete underbody at least once each year, preferably after winter exposure. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Vehicle Care 189

Interior and upholstery other agent. Avoid solvents and mats need replacing, it is petrol in particular. Do not use high recommended that Holden approved Only clean the vehicle interior, pressure jet cleaners. floor mats be purchased. including the instrument panel fascia and panelling, with a dry cloth Non-genuine floor mats may not fit or interior cleaner. Floor Mats properly and may interfere with the accelerator or brake pedal. The instrument panel should only be . Pull up the small peg at the cleaned using a soft damp cloth. corner to remove the mat. Always check that the floor mats do not interfere with the pedals. Clean fabric upholstery with a . Push the mat down onto the peg vacuum cleaner and brush. Remove to replace. . Use the floor mat with the stains with an upholstery cleaner. correct side up. Do not turn it over. Clean seat belts with a mild, { Warning Do not place anything on top of nonabrasive soap and lukewarm If a floor mat is the wrong size or . the driver side floor mat. water. is not properly installed, it can After washing thoroughly, sponge interfere with the accelerator . Use only a single floor mat on the solution out of the belts. pedal and/or brake pedal. the driver side. Interference with the pedals can . Do not place one floor mat on Caution cause unintended acceleration top of another. Close Velcro fasteners as open and/or increased stopping Velcro fasteners on clothing could distance which can cause a crash damage seat upholstery. and injury.

Plastic and rubber parts Make sure the floor mat does not interfere with the accelerator or Plastic and rubber parts can be brake pedal. cleaned with the same cleaner as Original equipment and Genuine used to clean the body. Use interior Holden Accessory floor mats are cleaner if necessary. Do not use any designed for your vehicle. If the floor Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

190 Service and Maintenance General Information When the system has calculated Service and that oil life has been diminished, it Maintenance indicates that an oil change is Service Information necessary. The vehicle message In order to ensure economical and Code 82 or Change : % (Change General Information safe vehicle operation and to engine oil soon) is displayed. Service Information ...... 190 maintain the value of your vehicle, it is of vital importance that all Change the oil as soon as possible Recommended Fluids, maintenance work is carried out at within the next 750 km. Lubricants, and Parts the proper intervals as specified. It is possible that, if you are driving Recommended Fluids and under the best conditions, the oil life Lubricants ...... 191 See your Service/Warranty Booklet for the service schedules and for system may indicate that an oil more information. change is not necessary for a longer period than that shown in the Engine oil life system service schedule. However, the engine oil and filter must be Changing engine oil changed in accordance with the The vehicle has a computer system service schedules outlined in the that indicates when to change the service booklet. engine oil and filter. This is based A Holden dealer has trained service on a combination of factors which people who will perform this work include engine revolutions, engine and reset the system. temperature and kilometres driven. To reset the EOLS, Driver Based on driving conditions, the Information Centre (DIC) 0 64. kilometres at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Service and Maintenance 191 Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants Engine type 1.4 L Petrol Engine oil specification 5W/30 or 5W/20 f (dexos™ 1) 50% clean fresh water and 50% Dexcool® anti-freeze coolant, Coolant specification conforming to specification number GMW3420 Manual transmission fluid AC Delco Select Plus Semi Synthetic 75W/85 Continuously Variable Transmission CVTF-GREEN-2 (CVT) Fluid DOT 4 Hydraulic brake fluid, conforming to specification number Brake fluid GMW3356 Battery 12 volts, 50 amp hours Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

192 Technical Data Technical Data Vehicle Identification Engine Identification Vehicle Identification Vehicle Identification Number (VIN) Vehicle Identification Number (VIN) ...... 192 Engine Identification ...... 192 Identification Plate ...... 193 Vehicle Data Engine Data ...... 194 Vehicle Weight ...... 194 Capacities and Specifications ...... 195 Tyre Pressure ...... 196 The engine serial number is located in the front part of the engine compartment. The vehicle identification number (VIN) is stamped in the engine compartment panel and is also located behind the windscreen on the passenger side. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Technical Data 193

Identification Plate

An identification and compliance label is located on the front passenger door frame. The label shows: 1 : Approval number 2 : Manufacturer 3 : Category 4 : Number of seats 5 : Vehicle identification number 6 : Compliance date Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

194 Technical Data Vehicle Data Engine Data Engine type 1.4 L DOHC Petrol Number of cylinders 4 Engine 1399 Engine power Please refer to holden.com.au Engine torque Please refer to holden.com.au Petrol octane rating (RON) Unleaded regular 91 or higher Ethanol compatibility E10

Vehicle Weight Overloading is a safety hazard and could also shorten the life of the vehicle. Maximum vehicle payloads Occupants (average 68 kg each) Luggage (kg) Total load (kg) 5 68 408 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Technical Data 195

Axle loads Maximum front and rear axle loads Do not exceed the maximum axle loads, including the weight of any options or accessories fitted to the vehicle. Weigh at a weighbridge if unsure. Front axle load (kg) Rear axle load (kg) 780 750

Dimensions (mm) Width (excl. Length mirrors) Width (inc. mirrors) Height Wheel base 3595 1595 1876 1476 2385

The above figures are based on the design dimensions. Capacities and Specifications Engine type 1.4 L DOHC Petrol Refill engine oil including filter (approximately) 4.0 L Coolant (approximately) 4.0 L Fuel tank 32.0 L Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

196 Technical Data

Tyre Pressure Recommended pressure Normal load Eco load Maximum load Front Rear Front Rear Front Rear Spare Wheel Tyre size size kPa PSI kPa PSI kPa PSI kPa PSI kPa PSI kPa PSI kPa PSI 165/65 R14 14 X 230 33 220 32 270 39 250 36 270 39 270 39 —— SL 79T 5.0 J 185/55 R15 15 X 230 33 220 32 270 39 250 36 270 39 270 39 —— SL 82H 6.0 J 195/45 R16 16 X 230 33 220 32 270 39 250 36 270 39 270 39 —— SL 84H 6.0 J T105/70 — 420 60 D14 SL 84M Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Customer Information 197 Customer Customer Information Information Trademarks and Licence Agreements Customer Information Trademarks and Licenses Trademarks and Licence Agreements ...... 197 Owner Assistance ...... 198

iPod® and iPhone® are registered trademarks of Apple Inc. “Made for iPod” and “Made for iPhone” refer to electronic accessories designed to connect specifically to an iPod or an iPhone that have been certified by the developer to meet Apple performance The Bluetooth™ word mark and standards. Apple is not logo are registered trademarks and responsible for the operation of are owned by Bluetooth SIG, Inc. this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an iPod or iPhone may affect wireless performance. Apple CarPlay™ is a trademark of Apple Inc. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

198 Customer Information

Android™, Android Auto™ and As a first step, Holden suggests you The contact number is: Google Play™ are trademarks of discuss any concern with the 1800 033 349 Google Inc. relevant Department Manager (Sales Manager or Service Email Dexos™ and Dexcool™ and their associated logos are registered Manager). Alternatively, you may prefer to trademarks of General Motors, LLC. Alternatively, the Dealership email Holden at: General Manager or Dealer [email protected] Owner Assistance Principal will also be happy to assist you. Written Correspondence Holden Customer Care Holden Customer Care Office You can also write to Holden at the At Holden, we want you to be address below: completely satisfied with your Should you wish to speak to a The Manager ownership experience. This applies Holden representative, you are to your vehicle and any Holden welcome to contact the Holden Holden Customer Care Centre Customer Care team. representative you may deal with. GPO Box 1714 Refer below for operating hours and Refer below for two options for Melbourne 3001 seeking assistance with your query. various methods of communication. Your written correspondence should Holden Dealerships Operating Hours clearly outline your concern or query Holden encourages you to seek Weekdays : 8 am – 7 pm AEST and include: assistance from your Holden Saturday : 9 am – 1 pm AEST . Your name and address Dealership. Each Holden Dealership is equipped to manage any sales, Telephone . Telephone numbers, both private and business servicing, parts or technical query. Holden Customer Care can be In the instance that you wish to telephoned from anywhere within . Servicing dealer's name and escalate a query to a higher level of Australia for only the cost of a address staff, further options are available local call. . Vehicle model to you. Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Customer Information 199

. Vehicle identification number Applicable details for New Zealand (I.S.O.V.I.N.), refer to the inside are set out in the Holden Warranty front cover of the Service/ and Owner Assistance Information Warranty Booklet in your booklet enclosed in the New vehicle's glovebox Zealand glovebox wallet. . Date of purchase New Zealand Assistance can be . Current odometer reading reached on: Most of this information will be 0800 HOLDEN (0800 465 336) found on the Vehicle Identification This number provides access to Certificate, located inside the front New Zealand Roadside Assistance cover of the Service/Warranty as well as New Zealand Booklet in your vehicle's glovebox. Customer Care. Before you write however, Alternatively, you may prefer to remember that the telephone is a email Holden at: quicker and more effective means of [email protected] communication. You can also write to Holden at the New Zealand address below: The information in this owner’s The Manager manual applies primarily to Australian Holden vehicles and Holden Customer Care Centre there may be some differences to P.O. Box 11195 the Warranty and Owner Assistance provisions for New Zealand. Ellerslie Auckland 1542 New Zealand Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

200 Index Index A Audio Accessory Power ...... 125 Bluetooth ...... 98 Adjustable Air Vents ...... 118 Theft-Deterrent Feature ...... 81 Adjustments Automatic Seat, Initial Drive ...... 32 Transmission ...... 127 Air Cleaner/Filter, Engine ...... 154 Automatic Transmission Air Conditioning ...... 115 Fault ...... 130 Air Filter, Passenger Interruption of Power Compartment ...... 119 Supply ...... 130 Air Intake ...... 118 Transmission Display ...... 128 Airbags Auxiliary Devices ...... 97 Curtain ...... 41 B Front ...... 39 Battery ...... 157 Seat Belt Tensioner Light ...... 60 Jump Starting ...... 183 Side ...... 40 Power Protection ...... 78 System Check ...... 38 Blade Replacement, Wiper . . . . . 158 Alarm System Bluetooth Anti-theft ...... 25 Overview ...... 101 AM-FM Radio ...... 88 Bluetooth Audio ...... 98 Antenna Bonnet ...... 150 Fixed Mast ...... 91 Bonnet Open Warning Light . . . . . 64 Anti-theft Boot ...... 48 Alarm System ...... 25 Brakes ...... 132 Antilock Brake System (ABS) . . . 133 Antilock ...... 133 Warning Light ...... 61 Assist ...... 134 Appearance Care Brake and Clutch System Exterior ...... 186 Warning Light ...... 60 Interior ...... 188 Fluid ...... 156 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Index 201

Brakes (cont'd) Check Covers Parking ...... 134 Malfunction Indicator Engine Wheel ...... 174 Break-In, New Vehicle ...... 121 Light ...... 60 Cruise Control ...... 141 Bulb Replacement Child Restraint Systems Light ...... 64 Fog Lamps ...... 163 Top Tether ...... 45 Cupholders ...... 48 Front Turn Signal Lamps . . . . . 163 Child Restraints Curtain Airbag System ...... 41 Headlamps ...... 158, 160 ISOFIX ...... 45 D Interior Lamps ...... 166 Systems ...... 43 Danger, Warning, and Caution . . . . 3 Licence Plate Lamps ...... 165 Cleaning Daytime Running Side Turn Signal Lights ...... 165 Exterior Care ...... 186 Lamps (DRL) ...... 75, 161 Taillamps, Turn Signal, Interior Care ...... 188 Devices Stoplamps, and Reverse Clock ...... 54 Auxiliary ...... 97 lamps ...... 164 Compartment ...... 48 Displays Buying New Tyres ...... 173 Load ...... 48 Automatic Transmission ...... 128 Buzzers, Warning ...... 67 Compressor Kit, Tyre Service ...... 58 Sealant ...... 174 C Transmission ...... 59 Computer, Trip ...... 68 Camera, Rear Vision ...... 138 Door Control Indicators ...... 56 Capacities and Ajar Light ...... 64 Control of a Vehicle ...... 120 Specifications ...... 195 Central Locking System ...... 20 Control System Carbon Monoxide Driver Assistance Systems . . . . . 141 Emission ...... 148 Engine Exhaust ...... 127 Driver Information Convex Mirrors ...... 26 Catalytic Converter ...... 127 Centre (DIC) ...... 64 Coolant Caution, Danger, and Warning . . . . 3 Engine ...... 154 E Central Locking System ...... 20 Engine Temperature Electrical System Chains, Tyre ...... 174 Warning Light ...... 62 Engine Compartment Fuse Charging System Light ...... 60 Courtesy Lamps ...... 77 Block ...... 167 Fuses ...... 166 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

202 Index

Electrical System (cont'd) F Fuel (cont'd) Instrument Panel Fuse Fault, Automatic Low Fuel Warning Light ...... 63 Block ...... 169 Transmission ...... 130 Fuses ...... 166 Electronic Stability Control ...... 136 Filter, Engine Compartment Fuse Electronic Stability Control Engine Air Cleaner ...... 154 Block ...... 167 (ESC) Off Light ...... 62 Fixed Mast Antenna ...... 91 Instrument Panel Fuse Electronic Stability Control Flashers, Hazard Warning ...... 75 Block ...... 169 Indicator Light ...... 62 Flat Tyre G Emission Control System ...... 148 Changing ...... 178 Gauges Emission Information ...... 148 Floor Mats ...... 189 Fuel ...... 56 Engine Fluid Odometer ...... 55 Air Cleaner/Filter ...... 154 Brakes ...... 156 Service Display ...... 58 Check and Service Engine Washer ...... 155 Speedometer ...... 55 Soon Light ...... 60 Fog Lamps Tachometer ...... 56 Compartment Overview ...... 152 Bulb Replacement ...... 163 Transmission Display ...... 59 Coolant ...... 154 Front ...... 76 Trip Odometer ...... 55 Coolant Temperature Folding Mirrors ...... 27 Turn Signal ...... 59 Warning Light ...... 62 Front Airbag System ...... 39 General Information Exhaust ...... 127 Front Fog Lamp Vehicle Care ...... 148 Oil Pressure Light ...... 62 Light ...... 63 Glove Box ...... 47 Reduced Power Light ...... 63 Front Seat Position Seats Starting ...... 14, 123 Adjustment ...... 32 H Engine Data ...... 194 Front Seats Hands-Free Phone ...... 104 Engine Identification ...... 192 Adjustment ...... 32 Hazard Warning Flashers ...... 75 Exit Lighting ...... 78 Front Turn Signal Lamps ...... 163 Head Restraints ...... 31 Extended Parking ...... 126 Fuel ...... 143 Headlamps ...... 160 Exterior Lamp Controls ...... 74 Filling the Tank ...... 145 Bulb Replacement ...... 158 Gauge ...... 56 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Index 203

Headlamps (cont'd) J Lights Daytime Running Jump Starting ...... 183 Airbag and Seat Belt Lamps (DRL) ...... 75, 161 Tensioner ...... 60 K High-Beam On Light ...... 63 Antilock Brake System Keys ...... 16 High/Low Beam Changer ...... 74 (ABS) Warning ...... 61 Heated L Bonnet Open ...... 64 Rear Window ...... 29 Lamps Brake and Clutch System ...... 60 High-Beam On Light ...... 63 Courtesy ...... 77 Charging System ...... 60 Hill Start Assist (HSA) ...... 134 Daytime Running (DRL) . . .75, 161 Cruise Control ...... 64 Horn ...... 12, 51 Exterior Controls ...... 74 Door Ajar ...... 64 Front Fog ...... 76 I Engine Coolant Temperature Front Turn Signal ...... 163 Warning ...... 62 Identification Plate ...... 193 Interior ...... 166 Engine Oil Pressure ...... 62 Ignition Positions ...... 122 Licence Plate ...... 165 Front Fog Lamp ...... 63 Immobiliser ...... 26 Malfunction Indicator ...... 60 High-Beam On ...... 63 Light ...... 63 Reading ...... 77 High/Low Beam Changer ...... 74 Indicators Reversing ...... 76 Immobiliser ...... 63 Control ...... 56 Side Turn Signal ...... 165 Low Fuel Warning ...... 63 Information Light Operate Pedal ...... 61 Service ...... 190 Electronic Stability Control Reduced Engine Power ...... 63 Information on Loading the (ESC), Off ...... 62 Safety Belt Reminders ...... 59 Vehicle ...... 48 Traction Control Service Vehicle Soon ...... 60 Instrument Panel System (TCS) ...... 62 Tail Lamp Indicator ...... 63 Overview ...... 9 Variable Effort Steering ...... 61 Ultrasonic Parking Sensor ...... 61 Storage Area ...... 47 Lighting Up-Shift ...... 61 Interruption of Power Supply . . . . 130 Exit ...... 78 Link Introduction ...... 2, 79 Illumination Control ...... 76 Smartphone ...... 110 ISOFIX Child Restraint LoadCompartment ...... 24 Systems ...... 45 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

204 Index

Loading the Vehicle ...... 48 Oil (cont'd) Power Locks Pressure Light ...... 62 Mirrors ...... 26 Central Locking System ...... 20 Operate Pedal Light ...... 61 Outlets ...... 54 Safety ...... 23 Operation Protection, Battery ...... 78 Low Fuel Warning Light ...... 63 Infotainment ...... 82 Reduced Engine Light ...... 63 Other Service Items M Retained Accessory (RAP) . . . 125 Air Conditioning System ...... 115 Windows ...... 28 Maintenance Schedule Outlets Pressure Recommended Fluids and Power ...... 54 Tyre ...... 196 Lubricants ...... 191 Outside Temperature ...... 54 Malfunction Indicator Lamp ...... 60 R Overview ...... 81 Manual Transmission ...... 132 Radio Owner Assistance ...... 198 Manual Windows ...... 27 AM-FM ...... 88 Memorised Settings ...... 20 P Reading Lamps ...... 77 Messages Parking ...... 125 Rear Seats ...... 34 Vehicle ...... 65 Brake ...... 134 Rear Vision Camera (RVC) . . . . . 138 Mirrors Extended ...... 126 Rear Window Washer/Wiper . . . . . 53 Convex ...... 26 Ultrasonic Sensor Light ...... 61 Rear Windows Folding ...... 27 Parking Assist ...... 137 Heated ...... 29 Manual Rearview ...... 27 Passenger Compartment Air Rearview Mirrors ...... 27 Power ...... 26 Filter ...... 119 Recommended Fluids and Personalisation N Lubricants ...... 191 Vehicle ...... 70 Reduced Engine Power Light . . . . 63 New Vehicle Break-In ...... 121 Phone Remote Control ...... 18 O Bluetooth ...... 101 Radio ...... 18 Odometer ...... 55 Hands-Free ...... 104 Restraints Trip ...... 55 Pictures and Movies ...... 111, 113 Where to Put ...... 44 Oil Port Retained Accessory Engine ...... 153 USB ...... 91 Power (RAP) ...... 125 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

Index 205

Reverse Lamps ...... 76 Side Turn Signal Lights ...... 165 T Ride Control Systems ...... 136 Signals, Turn and Tachometer ...... 56 Electronic Stability (ESC) . . . . . 136 Lane-Change ...... 75 Tail Lamp Indicator Light ...... 63 Roof Smartphone Link ...... 110 Taillamps Sunroof ...... 30 Specifications and Bulb Replacement ...... 164 Rotation, Tyres ...... 173 Capacities ...... 195 Technical Data S Speedometer ...... 55 Tyre Pressure ...... 196 Start Assist, Hill ...... 134 Safety Belts ...... 35 Temperature Starting the Engine ...... 14, 123 Reminders ...... 59 Outside ...... 54 Steering ...... 121 Three-Point ...... 37 Theft-Deterrent Systems Wheel Adjustment ...... 51 Safety Locks ...... 23 Immobiliser ...... 26 Wheel Controls ...... 51 Sealant Kit, Tyre ...... 174 Thermometer Stoplamps and Reverse lamps Seats Outside Temperature ...... 54 Bulb Replacement ...... 164 Adjustment, Front ...... 32 Three-Point Seat Belt ...... 37 Storage Head Restraints ...... 31 Time ...... 54 Boot ...... 24, 48 Position, Front ...... 32 Tools ...... 171 Vehicle ...... 148 Rear ...... 34 Top-Tether Child Restraint Storage Areas Service Systems ...... 45 Glove Box ...... 47 Doing Your Own Work ...... 149 Towing Information on Loading the Engine Soon Light ...... 60 Vehicle ...... 185 Vehicle ...... 48 Vehicle Soon Light ...... 60 Traction Instrument Panel ...... 47 Service and Maintenance Control System (TCS) ...... 135 Sun Visors ...... 29 Service Information ...... 190 Traction Control System Sunroof ...... 30 Service Display ...... 58 (TCS) Off Light ...... 62 Systems Service Information ...... 190 Trademarks and License Driver Assistance ...... 141 Settings ...... 106 Agreements ...... 197 Memorised ...... 20 Transmission Side Airbag System ...... 40 Automatic ...... 127 Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden- 10370322) - 2017 - crc - 4/19/16

206 Index

Transmission Display ...... 59, 128 V Wheels and Tyres ...... 172 Tread Depth ...... 172 Variable Effort Steering Light . . . . 61 Where to Put the Restraint ...... 44 Trip Computer ...... 68 Vehicle Windows Trip Odometer ...... 55 Control ...... 120 Heated, Rear ...... 29 Turn and Lane-Change Identification Number (VIN) . . . 192 Manual ...... 27 Signals ...... 75 Messages ...... 65 Power ...... 28 Turn Signal ...... 59 Personalisation ...... 70 Windshield Bulb Replacement ...... 164 Service Soon Light ...... 60 Wiper/Washer ...... 52 Tyre Pressure ...... 196 Towing ...... 185 Wiper Blade Replacement ...... 158 Tyres Vehicle Care Wipers Buying New Tyres ...... 173 Tyre Pressure ...... 172 Rear Washer ...... 53 Chains ...... 174 Vehicle Identification Changing ...... 178 Plate ...... 193 Rotation ...... 173 Vehicle Storage ...... 148 Sealant and Vehicle Weight ...... 194 Compressor Kit ...... 174 Ventilation Tyres and Wheels ...... 172 Adjustable Air ...... 118 U Visors ...... 29 Ultrasonic Parking Sensor W Light ...... 61 Warning Upshift light ...... 61 Caution and Danger ...... 3 USB Port ...... 91 Warning Chimes ...... 67 Using This Manual ...... 3 Warnings Hazard Flashers ...... 75 Washer Fluid ...... 155 Weights Vehicle ...... 194 Wheel Covers ...... 174