x11-Scan User’s Manual
-0-
EN
Table of Contents
1. Precaution ...... 2 2. Preparation ...... 3 Standard Accessories ...... 3 Part Names ...... 4 3. Start Using Your Digital Film Scanner ...... 6 Settings for Film Scanning……………………...... 9 Image Resolution………………………………...... 11 4. Placing holder into the scanner…..……………………14 5. Image Brightness and Color Adjustment ...... 13 6. Playback and Delete Mode ...... 13 7. Preview and review images on a TV screen……….…16 8. Downloading the images from Card to Computer…...17 9. Appendix……………………………………………….19 Specifications……………………………………...... 19 Icon & Indicators………………………………………20
-1- Welcome EN Thank you for purchasing x11-Scan. Please take a moment to read through this manual.
1. Precaution
Before using x11-Scan, please ensure that you read and understand the safety precautions described below. Always ensure that the x11-Scan is operated correctly.
Do not try to open the case of the scanner or attempt to modify it in any way. Maintenance and repairs should be performed only by authorized service providers.
Keep the x11-Scan away from water and other liquids. Do not use it with wet hands.
Keep the scanner and its accessories out of the reach of children and animals to prevent accidents or damage.
Use only the recommended power accessories. Use of power sources not expressly recommended for x11-Scan may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards.
If the exterior of x11-Scan needs cleaning, wipe it with a soft, dry cloth.
-2- 2. Preparation EN
Standard Accessories
Digital Film Scanner User’s Manual
135 holder for negatives
135 holder for slides Power adapter
Cleaning brush USB cable
-3- Part Names EN
EN
-4-
Holder for type 126 negatives (optional accessory, item # 64374)
Holder for type 110 negatives (optional accessory, item # 64373)
Note: We suggest using bundled brush to insert into the scanner’s slot and clean the glass surface periodically to produce a clear image. Please make sure your film negatives / mounted slides and cover trays are clean before inserting into the scanner as well. Dust or dirt will affect the quality of your scanned images.
-5-
3. Start Using Your x11-Scan EN
1. Insert the SD Card into the Scanner. Insert the SD card into the SD Card Slot located at the back of the scanner. Make sure that the golden print on the card is facing downward. The card will be locked automatically if it is inserted properly.
Note: Only accept SD and SDHC card (Maximum 32GB). Card with SDXC class is not compatible.
2. Connect the electric power to your Scanner. Connect the Type-C USB cable terminal to the Type-C USB Connector of the Scanner.
Connect the other larger USB terminal to the Power Adaptor or the USB port of your computer, any of both devices will supply the power needed by the scanner.
-6-
EN
Press the Power Button of your scanner to turn on the electric power. You will see a pop up screen of Home Page on the LCD, select the item you want to operate. There are 4 items (icons) for selection.
Note: The Home Page and the Button The Home Page is an important page for the operation of the scanner. From the Home Page you can go to the preview mode of the scanner for scanning film directly by pressing the Button once again, after all the settings for the film are made. You may frequently use the Button in the operations of the scanner later on.
Film icon USB Trident Photo Gallery Calendar
-7-
The Film icon: EN This is the main function of the scanner, a function for you to make all the settings for scanning film. For example the setting of type and size of film, a selection for scanning 50x50mm transparent slide, or negative film for 135, 110 and 126 films. For more detail please see page 11:
( Operation of the Scanner : Settings for scanning: )
The USB Trident icon: For downloading the image files from the SD Card to the computer. For more detail please see page 20:
(Downloading the images from Card to Computer)
The Photo Gallery icon: For you to review the scanned images from the card on LCD screen. You may use it as a mini electronic Photo Frame on your desk. For more detail, please see description on page 17: (Playback and Delete mode)
The Calendar icon: For you to set the date and time you prefer to be shown in your image files. For more detail please see page 21: (The Date and Time setting:)
-8- Operation of the scanner : EN Settings for scanning: On the home page of the LCD Screen, select the Film icon (preset) by pressing / button, then OK/( ) button to confirm your selection.
You will then move to the 2nd. page of selections for you to select the type of film:
Slide Color Negative B&W Negative
Select the type of film you want to scan by pressing / Button, then OK/( ) Button to confirm your selection. You will then move to the 3rd. page of selections for you to select the size of film, they are:
135 Film: film with 24x36mm picture area 110 Film: film with 13x17mm picture area 126 Film: film with 28x28mm picture area.
-9-
Select the size of film you want to scan by pressing EN / button, then OK/( ) Button to confirm your selection.
A preview screen will pop up on the LCD screen, you may now insert the film holder into the scanner and photo of the film will be shown on the LCD screen, ready for you to convert the photos into digital images and store them in the SD Card.
Quick guide to Preview Mode for scanning film: In any condition press the Button will return to the Home Page of the scanner. Press one more time from the LCD screen Home page will at once direct you to the preview mode for scanning film. Press once again will return to the Home Page. Preview Screen:
-10-
Image Resolution: EN There are 2 resolutions of scanning and storing your image in the SD Card, 14 megapixels and 22 megapixels (by interpolation). The resolution is set by pressing the ( ) button on the Preview mode. The set value is shown on the lower right hand side of the preview screen.
-11-
4. Place Slide / Film Holder Into the Scanner EN
The scanner supports 50x50mm mounted slides with a thickness of up to 3.2 mm, color negative and B&W negative films of type 135, 110 and 126.
Insert your slides into the slide holder or your negative strips into the negative holder. Make sure the shiny side of the film is facing upward.
Now insert the holder into the slot of the scanner from the right side. When moving on, the holder will snap into place with each image. You may fine adjust the film’s position by referring the image shown on the display.
Press the OK/( ) button to scan the image, the image is saved into the SD Card automatically.
-12-
5. Image Brightness and Color Adjustment EN
The brightness and color of the image are preset automatically. Normally additional adjustment is not needed. Some film brightness and color fade out and needs adjustment. Press or Button and you will see the following icons display on the LCD screen for adjustment.
Brightness Adjustment RGB Color Adjustment
Press Brightness or RGB Button then Playback( ) Button to move to the color you want to adjust. Press the / / Button to select the value of adjustment you want then press the OK/( ) Button to confirm your selection. The adjusting icons will disappear then press the OK/( ) Button once more to scan the adjusted picture. You may select the recover icon( ) to reset the adjusted colors to its original default setting.
Important Notes: All your settings for scanning film of your last scanning will be reset when the power of the scanner is turned off by the Power Button or unplug from the USB cable. Your previous film setting is kept when you select the Brightness( ) or RGB( ) Button again from the preview mode, if the power of scanner was not turned off. -13-
6. Playback and Delete mode EN Playback: In scanner Preview mode (Press the Button once again), you may review the previous captured images by pressing the (Playback) button then and button for image selection. Press the OK/( ) button will allow you to review the selected captured images stored in the SD card. Press the (Playback) button once again will set the captured images in a slide show mode. The images will be slide over with a duration of 5 seconds per frame. In Slide Show mode pressing the OK/( ) Button will return to the Home Page of the scanner. You may also select the Playback Mode from the Home page of the scanner by selecting the Photo Gallery icon. The operation of the Photo Gallery mode is the same as described in the Playback mode.
The scanner with Playback (Photo Gallery) setting is a good way to use it as a mini photo frame on your desk.
Important Note: The scanner’s Photo Gallery mode only accepts the images scanned by the scanner. For images from other devices, for example the digital camera or mobile phone, may or may not be accepted and displayed from the scanner, due to the different file names or photo format of the images.
-14-
Deleting Files: EN
To delete a captured image, under the Playback mode, select the picture you want to delete by or Button, press the Delete Button ( )once will allow you to delete the selected image. Press the Delete Button twice will allow you to delete all the captured images. You may select No (not to delete) from the or Button to leave the Delete Mode.
Formatting SD Card:
If the SD Card (maximum 32GB) you use is not compatible with the scanner and no scans can be stored on it, card formatting by computer is required. Select file system FAT32 to format your card. Formatting your SD Card will delete all the files in your card. Please save your files (if any) onto your computer before card formatting.
-15-
7. Previewing and Reviewing images on a TV screen EN
Connect your scanner and TV set using an HDMI cable. Set your TV to the proper HDMI terminal that you are connecting, turn on the power of the scanner and press the Home/Preview Button allow you to preview the image of your film, or select the Galley Icon from the Home Page then press the OK/( )Button to review your scanned images on the TV screen.
You may also connect the scanner to TV set via USB setting, to review the captured images up to a 4K/2K image quality, depending on the maximum resolution of your TV set.
For proper USB connection of your TV set please refer to the instruction manual of your TV set, and treat your USB and scanner connection like a card reader.
-16-
8. Downloading the images from Card to Computer EN
Connect the Type-C USB cable to the scanner and your computer’s USB port. Turn on the power of both your computer and scanner. From the Home Page of the scanner (preset), select the USB Trident Icon by / / Button then OK/( ) Button to activate the connection. Use it as a mass storage device or card reader that is connected to your computer to download the image files.
Connection success Connection fail
If the connection fails: Please check the loading of the SD Card, make sure that it is properly loaded in the Card Slot. Reload the SD Card and try again. Try to connect the USB terminal to the other port of your computer, a defect computer USB port may cause connection fail.
-17- EN The Date and Time setting: You may set the Date and Time in the image file before scanning image. The Date and Time set will not be printed on the picture of the scanned image, it only stored in the electronic file of the image. From the Home Page of the scanner, select the Calendar icon by / Button then OK/( ) Button to confirm your selection. You will see a date adjustment table as shown below.
Press the Playback Button( ) to select the item you want to adjust. Use the / Button to increase or reduce the number you are going to set, then press the OK/( ) Button to confirm your selection and leave the adjustment table back to the Home Page. The purpose of having Time and Date setting: Some user want to set the date of the picture back to the date the photo was taken, if they can remember that approximate date.
-18- 9. Appendix EN
Specifications Image Sensor 1/2.33” 14 Mega CMOS Sensor, Preview and Review 5” all angle IPS LCD Display Lens Specification F/No. 3.5, 5 elements lens Color Balance Automatic Exposure Control Automatic & Manual adjustment Support Film Size 135 Negative & Slide (3:2) Auto Cropping 110 Negative & Slide (4:3) 126 Negative & Slide (1:1) Support Film Type 50x50mm Slide (135 , 110 &126) Auto Converting Color Negative Film (135 ,110 & 126) Black & White Negative Film Focusing Fixed Focus EV adjustment Yes, + - 2.0 EV RGB Color adjustment Yes PC Interface USB 2.0 Image Format 135 Negative 3:2 Ratio 110 Negative 4:3 Ratio 126 Negative, 1:1 Ratio Light Source White LED Panel Power Source From computer USB port, 5V/1A Power adapter USB Connector Type-C TV Connection HDMI Dimension 95 (H) x 135 (W) x 125 (D) mm Specifications are subjected to change without prior notice.
-19- Icons and their functions: EN
Icons Functions and Indication Scanning films
Connect SD Card to Computer
Reviewing scanned photos in the SD card
Setting date and time
For transparent film and 50X50mm slides
For color negative film
For black and white film
For 135 film, 24X36mm picture size film
For 110 film, 13X17mm picture size film
For 126 film, 28X28mm picture size film
Selected film type shown on preview :Transparent film
Selected film type shown on preview : Color negative film
Selected film type shown on preview : B&W negative film
Selected film size shown on preview : 135 film
Selected film size shown on preview : 110 film
Selected film size shown on preview : 126 film
Brightness setting : －2EV to ＋2EV
Resolution setting : 14M or 22M
Capacity of card : Full=3GB＋, 3/4=2GB, 2/4=1GB, 1/4=0.5GB
SD card malfunction: Not loaded, locked, or not compatible
-20- Reviewing picture from card: single picture
Reviewing pictures from card: Slide show
Brightness(EV) adjustment scale
RGB color adjustment scale
RGB color adjustment recover to default setting
RGB color selection and reset
Single image delete selection
All scanned images delete selection
Indicate SD card and computer successfully connected
Indicates computer connection fail
Wait for scanned image to be stored into the SD card
-21-
There are separate collection systems for recycling of electronic equipment in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
reflecta GmbH Merkurstraße 8 72184 Eutingen Germany www.reflecta.de
-22-