WORKPLACE ORGANISATION Product range

2010_IMP_en_FB_WorkplaceOrg.indd 1 20.01.11 16:54 The workplace: no room for compromise.

Workplace organisation is at least as important as an accurate power tool. Because ultimately almost inexhaustible potential lies behind this. The optimisation of work processes, shorter tooling and channel times, as well as significantly more precise work results.

The decisive questions are: What characterises a well-organised workplace – irrespective if it is in the workshop or at the as- sembly stage? How can you replace search with find? How can costly retrofitting be reduced considerably by accessories that are coordinated to the machine and application? And how can ergonomic detail, for tools and lots more, be transferred to the entire work process?

The answers to all these questions cannot be found on the draw- ing board, but through direct dialogue with on-site tradesmen. Tasks associated with the approach are not to be viewed in isola- tion, but considered as a component of an integral system. With the aim of making each job quicker, simpler and more efficient.

Contents XX Systems get it done 04 XX T-LOC | SORTAINER 06 XX Systainer-Port SYS PORT | Roll board 08 XX Multifunction table MFT 3 10 XX Guide rail FS | GECKO DOSH dual suction pad 12 XX Vacuum clamping system VAC SYS 14 XX EAA energy | ASA boom arm 16 XX Workcenter WCR 1000 | Toolcenter TC 3000/2 18 XX Accessories and consumables | Scope of delivery and order numbers 20

2

2010_IMP_en_FB_WorkplaceOrg.indd 2 20.01.11 16:54 Guide rail In 1964 Festool made a breakthrough with the guide rail with respect to precision and simplifying work. With lots of useful detail it is impressive in all areas: slideway lining, splinterguard for splinter-free cuts, groove for fastening and lever clamps, as well as groove accessories for attaching combination bevels, kickback stops and GECKO DOSH dual suction pads.

SYSTAINER T-LOC The SYSTAINER T-LOC can be opened, locked or connected together with a single turn. With the SYSTAINER arrangement system, Festool has been setting standards in matters of functionality since 1993. The T-LOC is a further milestone. And like eve- rything else from Festool it fits perfect as a system.

Quality tools “Made in Germany” Many of our tools have already been in use for over 30 years. This is no coincidence but a logical conse- quence of the careful development and production “Made in Germany”. Our products live up to the prom- ise: tools for the toughest demands.

Special service With each warranty registration Festool custom- ers automatically receive an added benefit: the Festool Service. Starting with a particularly quick repair service, a reliable 7-year spare parts sup- ply, as well as an extended 3-year warranty on all new tools and machines. Find out more about the Festool Service and its associated benefits at www.festool.com

www.festool.com 3

2010_IMP_en_FB_WorkplaceOrg.indd 3 20.01.11 16:54 Because things work better when everything fits together.

Systems get it done. System = added value

Whoever wants to be good needs the perfect tool. Whoever Each investment in a Festool product represents added value. For example the guide rail: Used in wants to be better needs a system. A system in which acces- its basic function it provides precise support dur- sories and consumables go hand-in-hand with the tools. ing sawing and routing. Used with the combination bevel specific angles can be assigned directly to A system that stands for more order and organisation. And the workpiece. The guide rail in conjunction with a system that represents added value with each investment. the multifunction table results in a fully-fledged work station. A system that only has one goal: to achieve more success even more quickly and easily.

4

2010_IMP_en_FB_WorkplaceOrg.indd 4 20.01.11 16:54 System = continuous work process System = better organised

Full concentration on the work. The required tool is immediately on Whoever is better organised, attains their goals quicker. For this reason, hand and ready for use. The dust extraction is effected with the utmost Festool provides a universal system. With and Sortainers precision from the insertion of the tool right to the end when it is once for more order and arrangement, the Systainer-Port and Workcenter WCR again in an idle state. This is all controlled centrally via the EAA energy for better mobility or the Toolcenter TC 3000/2 as a compact, rolling box in connection with the ASA boom arm. For a larger action radius, workplace. Geared towards one goal, compatible and consistent: to make shorter tooling and path times and more time for the perfect result. each work process that bit more efficient.

www.festool.com 5

2010_IMP_en_FB_WorkplaceOrg.indd 5 20.01.11 16:54 SYSTAINER SYS T-LOC | SORTAINER Excellent order.

Tidier. Clearer arrangement. Simply better organised. XX Robust protection – machines, accessories and The Festool SYSTAINER and SORTAINER. And to make consumables are safe from dust, splashing water, things even easier in the future there is the new Sys- extreme temperature differences and impacts tainer T-LOC: Open. Lock. Connect. With a single turn. XX Mobile arrangement – with the SYSTAINER/ SORTAINER everything is stored neatly and easy to transport XX Clearly labelled – fields for inserting busi- ness cards or that can be ordered via the Festool homepage www.festool.com/service XX Can be carried upright – for sizes 1 and 2 of the SYS T-LOC there is an additional retractable handle (accessory) XX Compatible with previous Systainer generation

Technical data SYS T-LOC SYS 1 T-LOC SYS 1 T-LOC DF* SYS 2 T-LOC SYS 2 T-LOC DF*

Weight (kg) 1.3 1.3 1.5 1.5 External dimensions L x W x H (mm) 396 x 296 x 105 396 x 296 x 105 396 x 296 x 157.5 396 x 296 x 157.5

Technical data SYS T-LOC SYS 3 T-LOC SYS 3 T-LOC DF* SYS 4 T-LOC SYS 5 T-LOC

Weight (kg) 1.8 1.8 2.1 2.7 External dimensions L x W x H (mm) 396 x 296 x 210 396 x 296 x 210 396 x 296 x 315 396 x 296 x 420

Technical data MAXI/MINI SYSTAINER SYS MAXI SYS MAXI 2 SYS MINI

Weight (kg) 4.0 3.0 0.4 External dimensions L x W x H (mm) 590 x 390 x 210 590 x 390 x 157.5 265 x 170 x 70

Technical data SORTAINER SYS 3-SORT/4 SYS 3-SORT/6 SYS 3-SORT/9 SYS 3-SORT/12

Drawers 2 small, 1 medium, 1 large 6 medium 6 small, 3 medium 12 small Weight (kg) 4.0 4.9 5.1 5.3 External dimensions L x W x H (mm) 395 x 295 x 210 395 x 295 x 210 395 x 295 x 210 395 x 295 x 210 6 * DF = compartment Scope of delivery | Order numbers from page 26

2010_IMP_en_FB_WorkplaceOrg.indd 6 20.01.11 16:54 For system accessories and consumables see from page 26

Everything at a glance – the drawers of the SORTAINER offer lots of space for small parts.

1. Clearly arranged with individual dividers and additional labelling options.

2. From left or right. The handle on the two sides of the drawers enables quick access to the contents.

3. Accidental pulling out of drawers is avoided by the pull-out catch and individual safety lock.

4. With the selection of different sizes and the modular drawer system the right SORTAINER is on hand for every demand.

New – the central operating element of the Secure connection – in a SYSTAINER connection The new SYSTAINER T-LOC can be opened at SYSTAINER T-LOC combines three functions. or in combination with a mobile dust extractor, any time without having to be disconnected. Lock. Open. Connect. With a single turn. Systainer-Port and Workcenter WCR.

www.festool.com 7

2010_IMP_en_FB_WorkplaceOrg.indd 7 20.01.11 16:54 Systainer-Port SYS PORT | Roll board Good for quick transport.

Everything in its place and on hand at all times. The Systainer-Port and the roll board ensure increased mobility at the workplace.

XX Individual arrangement – the Systainer-Port has height-adjustable drawers for the precise adjustment to the respective Systainer height XX Can be moved in all directions – thanks to ball- bearing guide wheels XX Stable – the Systainer-Port comprises a robust steel plate, each roll board can transport up to 50 kg XX Well-secured – the Systainer-Port is equipped with an anti-slip rubber insert, interlocking drawers and a security lock, the locking brake prevents undesired rolling, also for the roll board XX Compatible – fits the SYSTAINER T-LOC and previ- ous Systainer generation

How many SYSTAINERS fit in a SYS-PORT?

SYSTAINER size SYS-PORT 500/2 SYS-PORT 1000/2

No. of SYSTAINERS No. of SYSTAINERS Version 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 101112131415161718192021222324252627282930313233 SYS 1 T-LOC/DF* 3 2 1 8665544333322222111 2 4 1 1 SYS 2 T-LOC/DF* 1 21 1 2 1 123 124 23 112345 2 SYS 3 T-LOC/DF* SORTAINER 1 1 1 121 12 3 212 31 1 411 2 SYS 4 T-LOC/DF* 1 1 1 1 1 2 1 2 1 1 2 1 SYS 5 T-LOC/DF* 1 1 2 1 1 1

Drawers required** 332221877766656655565455434445543452334

* DF = Lid compartment ** The SYS-PORT 500/2 is supplied with 3 drawers, the SYS-PORT 1000/2 with 5 drawers. Scope of delivery | Order numbers from page 26

8

2010_IMP_en_FB_WorkplaceOrg.indd 8 20.01.11 16:54 For system accessories and consumables see from page 26

Label fields for quick information on the contents.

Problem-free, even in narrow corridors – the dimensions of the roll board are barely larger than the SYSTAINER/SORTAINER.

Simple access – pull out completely to remove each SYSTAINER from the Systainer-Port or to open.

www.festool.com 9

2010_IMP_en_FB_WorkplaceOrg.indd 9 20.01.11 16:54 Multifunction table MFT 3 1 table. 1000 options.

Creates professional work conditions also at the XX Easy on the back – the work height of 90 cm is also assembly stage. Its flexible clamping and processing pleasant for tall users options for large and small workpieces make the XX Simple to expand – the MFT 3 can be connected multifunction table MFT 3 probably the most diverse with an additional MFT 3 or with the CMS modular worktop in the world. system and accessories using the V groove XX Easy to transport – the MFT 3 can be folded up XX Maximum precision – with all-round quickly and is thus also ideal for mobile use profile for holding the height-adjustable guide rail and the angle stop XX Maximum support – flexible and secure clamping through 96 hole pattern with fixed clamps and fastening clamps developed especially for this

Technical data MFT 3

Working height (folded away) 900 mm (180 mm) External dimensions 1157 x 773 mm Work surface 1102 x 718 mm Max. workpiece height 78 mm Max. workpiece width 700 mm Hole diameter 20 mm Hole pattern 96 mm Load capacity 120 kg Weight 28 kg

Scope of delivery | Order numbers from page 20

10

2010_IMP_en_FB_WorkplaceOrg.indd 10 21.01.11 17:01 For system accessories and consumables see from page 20

System extra – the MFT 3 extension allows you to use all the CMS modules for sawing, routing and sanding.

Whether it‘s large or small, angular or round, Connection to the system – via an adapter plate Precision in all situations – thanks to secure rail, horizontal or vertical – difficult shapes are easy the vacuum clamping system VAC SYS can angle stop, adjustable stop and additional clamp. to clamp on the MFT 3. be connected to the MFT 3 and swivelled down- The guide rail can be adjusted to different mate- wards when not in use. rial thickness.

2010_IMP_en_FB_WorkplaceOrg.indd 11 20.01.11 16:54 FS guide rail Impeccable guide.

Invented and perfected by Festool: the guide rail. For XX Clearance-free guide – the guidance jaws of the cuts and grooves that impress thanks to their preci- plunge-cut saws can be adjusted to the guide rail sion. With a slideway lining for the smooth running of without using any tools the machines, a groove for the fastening and lever XX Splinter-free cut – the rubber lip directly at the clamps or the splinterguard for splinter-free sawing. scribe mark prevents the edges from stripping, also for angled cuts XX Accurate work – for exact grooves there is the guide rail adapter for routers XX Simple angle transfer – with combination bevel and guide rail XX Easy to create a series of holes – for furniture assembly the guide rail with the hole pattern is indispensable

Quick for diagonal cuts – with guide rail and Simply precise – the workpiece width can be Indispensable in furniture construction – router combination bevel angles are easy to transfer comfortably adjusted with the parallel stop with and guide rails with rows of holes simplify work on from the workpiece or wall. a scale and adjustable stop. shelves or fittings.

12

2010_IMP_en_FB_WorkplaceOrg.indd 12 20.01.11 16:54 GECKO dual suction pad Secure connection for a period.

Work with a vacuum without leaving any marks. The GECKO dual suction pad – for simple and safe trans- port also for awkward workpieces or for securing the guide rail on smooth surfaces.

XX Ergonomic – the torsionally rigid carrier handle makes lifting loads a lot easier XX Holds the position, protects the materials – the slide rings attached on both suction pads allow easy and precise positioning, and also releasing, of the GECKO pad XX Secure support – the green clamping lever ensures quick and safe extraction XX With a system in mind – with the guide rail adapter the GECKO dual suction pad can be fitted directly on the guide rails

The GECKO dual suction pad transports Simple and fast assembly – the adapter for Significantly more comfort when laying floors. smooth and awkward workpieces safely securing the guide rail. and comfortably.

www.festool.com 13

2010_IMP_en_FB_WorkplaceOrg.indd 13 20.01.11 16:54 Vacuum clamping system VAC SYS Maximum flexibility all-round.

Processing workpieces in one work step from all XX Safe grip – with the foot valve the vacuum pad can angles – from the flat area to the edge – without con- be released and, at the same time, the workpiece verting. VAC SYS stands for simple, ergonomic and can be held in the hands quick work. XX Stable positioning – regardless of the subsurface the VAC SYS extracts at the work area or is se- XX Strong control – workpieces up to 30 kg and 1 x 1 m cured using fastening clamps are safely secured with each clamping unit XX For en route – pumps and clamping units are XX Protects the material – the pads are made from housed in a SYSTAINER designed for transport soft and flexible plastic – also sensitive surfaces can be clamped

Technical data VAC SYS

Pump capacity* 2.7 m3/h at 50 Hz, 3.5 m3/h at 60 Hz Voltage 220–240 V Insulation class F Noise level 55 dB (A) Dimensions 395 x 295 x 210 mm (SYSTAINER SYS 3) Weight VAC SYS VP 8.0 kg Work and storage conditions (Temp./Air humidity)** 0° C up to +50° C / 30 % up to 95 % Minimum vacuum ≥ 810 mbar / ≥ 81 % Power consumption 160–200 W at 50 Hz, 200–230 W at 60 Hz Speed 2800 rpm at 50 Hz, 3300 rpm at 60 Hz Operating time under normal conditions 5000-8000 hours

* Do not operate pump in excess of 2000 m above sea level ** Duration of extreme weather impact 30 days Scope of delivery | Order numbers from page 20 Vacuum pads available in sizes D 215 mm (round), 200 x 60 mm (oval), 277 x 32 mm (narrow), 275 x 100 mm (oval)

14

2010_IMP_en_FB_WorkplaceOrg.indd 14 20.01.11 16:54 For system accessories and consumables see from page 20

Pads can be replaced without using tools – there are four pad sizes to select from for differ- ent workpieces and they can be replaced quickly using FastFix.

Twice the power – for particularly large, difficult and rolling workpieces a second clamping unit can be connected to the VAC SYS pump.

Workpieces can be processed from all angles – can be rotated up to 360° and tilted up to 90°. Ergonomic work without converting is thus guaranteed.

www.festool.com 15

2010_IMP_en_FB_WorkplaceOrg.indd 15 20.01.11 16:54 EAA energy box | ASA boom arm For more ease of movement.

Extended action radius and central control: thanks to the energy box EAA and the boom arm ASA. They hold tools within easy reach, supply energy and extract automatically. For increased mobility and efficiency when working.

XX Can be adjusted manually – the suction power is made available through the slide operation, where a power tool and/or a compressed air tool is operated XX Flexible – the EAA can be mounted on ceilings, walls or the boom arm XX Ready for use straight away – two power tools or compressed air tools can be mounted directly on the housing for the EAA

Technical data EAA-EW* EAA-EW/DW*

Dimensions 506 x 580 x 367 mm 516 x 580 x 367 mm Pressure range 4–8 bar 4–8 bar Weight 10.2 kg 13 kg

Technical data ASA 2500 ASA 5000 ASA 6000

Boom extension 2.5 m 2 x 2.5 m 2 x 3.0 m Cutting angle adjustment 9 m2 39–58 m2 56–84 m2 Length of cables for power connection Approx. 3 m Approx. 3 m Approx. 3 m Weight 55 kg 77 kg 85 kg

* EW= power tool DW= compressed air tool Scope of delivery | Order numbers from page 24

16

2010_IMP_en_FB_WorkplaceOrg.indd 16 20.01.11 16:54 For system accessories and consumables see from page 24

Wall mounting Pillar mounting

The ASA boom arm ensures an increased action radius, makes possible a central energy supply and dust extraction and makes the tools ready at the exact position where they will be used.

XX Large utilisation area – extended action radius from 9–84 m2, high flexibility is guaranteed through the double-jointed technology for ASA 5000/6000 XX Mobile system – suitable for use with Festool mobile dust extractor CT/SRM XX Stable and lightweight – aluminium profiles make the ASA lightweight and extremely torsion-free XX Variable – can be mounted on walls and pillars

Increased security and better arrangement – Free choice – in the “MAN” switch position the dust in the hose holders on the rear of the EAA two extraction starts manually when the EAA is switched hoses can be stored and kept clean. on. Change to “AUTO” to switch on the tool. And in position “0” the power supply is only activated via the power outlet with permanent voltage.

www.festool.com 17

2010_IMP_en_FB_WorkplaceOrg.indd 17 20.01.11 16:54 Workcenter WCR 1000 Mobility in the tightest of spaces.

Compact and mobile work. The Workcenter WCR 1000 can be connected to all Festool mobile dust extrac- tors with an integrated Sys-Doc*. Tools, accessories and consumables are clearly arranged here.

XX Flexible equipment – hooks for holding two machines with extractor hoses, universal holder, storage compartment, as well as rotatable area for small parts XX Individually extendible – hole panel and profiled groove can be equipped with additional storage areas, hooks, and holders XX Easy on the back – simple height adjustment of the Workcenter, hooks and storage areas XX Individual extras – SYSTAINER sizes 1 to 4 or SORTAINER can be integrated in the Workcenter (not included in scope of delivery) XX Everything in its place – plastic hooks can be used to hang or cloths, the rotatable storage area is ideal for small parts

* except CT MINI/CT MIDI

Technical data WCR 1000

Dimensions Overall length 1050 mm Length of base plate 600 mm Width 362 mm Min. height 545 mm Max. height 785 mm Weight Approx. 10.2 kg Max. weight for storage 5 kg Hole pattern Large square hole pattern 9.2 x 9.2 mm Vertical hole inner distance 38.1 mm Horizontal hole inner distance 38.1 mm

Scope of delivery | Order numbers from page 24

Suitable for all extractors CT 22-55, CLEANTEX CT 26/36/48 and the special application Profiled groove for holding tools and universal extractor CTH 26/48 hooks – height-adjustable groove.

18

2010_IMP_en_FB_WorkplaceOrg.indd 18 20.01.11 16:54 Toolcenter TC 3000/2 Flexibility and extra work space.

Presence on 0.4 m²: The Toolcenter TC 3000/2 is a mobile workplace in which even the mobile dust extractor can be quickly integrated using the ex­ tractor dock.

XX Beneficial arrangement – tools, materials and mobile dust extractors are always neatly stored and on hand XX Mobile equipment – simple transport between different places of use in the workshop XX Firm support – the mobile dust extractor is secured by the extractor dock XX Secure – lockable cabinet for SYSTAINER up to size 3 for storing machines and accessories XX More space – devices and hose holders keep the storage areas free for the work equipment

Technical data TC 3000/2

Dimensions (length x width x height) 470 x 1070 x 960 mm Storage area 460 x 990 mm Storage area working height 925 mm Weight 43 kg

Scope of delivery | Order numbers from page 24

Attachment option for all mobile dust extractors CT, CTL, CTM 22/26/33/36; SR 200, SR 45 with strap

Clearly arranged – the abrasive can be stored on the rear wall and is within reach.

www.festool.com 19

2010_IMP_en_FB_WorkplaceOrg.indd 19 20.01.11 16:54 Vacuum clamping system | Multifunction table Accessories and consumable materials.

Clamping workpieces

Vacuum clamping system VAC SYS

1 2 3 4

Stability | Precision Clamping workpieces

Multifunction table MFT 3 9 10 11 12 13 14

VAC SYS Scope of delivery Order No. VAC SYS Set SE 1 Vacuum pump VAC SYS VP in SYSTAINER SYS 3, vacuum clamping unit VAC SYS SE 1 712223 with vacuum pad VAC SYS VT D 215 mm, vacuum hose and foot valve in SYSTAINER SYS 4 VAC SYS SE 2 Vacuum clamping unit VAC SYS SE 2 with vacuum pad VAC SYS VT 275 x 100 mm, 580062 vacuum hose and connector in SYSTAINER SYS 4 Vacuum pump VAC SYS VP in SYSTAINER SYS 3 580060

VAC SYS accessories Scope of delivery Order No. 1 Vacuum pad VAC SYS VT 200 x 60 oval, 200 x 60 mm 580064 2 Vacuum pad VAC SYS VT 277 x 32 narrow, 277 x 32 mm 580065 3 Vacuum pad VAC SYS VT 275 x 100 oval, 275 x 100 mm 580066 4 Vacuum pad VAC SYS VT D 215 round, Ø 215 mm 580067 5 Adapter VAC SYS AD-MFT 3 for securing the VAC SYS to the multifunction table MFT 3 494977 6 Foot valve VAC SYS FV for releasing the vacuum pad 580063 7 Vacuum hose D 16 x 5 m VAC SYS Length: 5 m 495293 8 Accessories Systainer VAC SYS VT Sort includes vacuum pad VAC SYS VT 200 x 60 mm, 495294 VAC SYS VT 277 x 32 mm, VAC SYS VT 275 x 100 mm and has space for the vacuum pad VAC SYS VT D 215

20

2010_IMP_en_FB_WorkplaceOrg.indd 20 20.01.11 16:55 More system accessories and consumables are available in the main catalogue.

Extension | System connection

5 6 7 8

VAC SYS SE 2

Extension | System connection

15 16 17

MFT 3 Scope of delivery Order No. Table with perforated board and foldaway legs, angle stop, guide rail adapter FS 1080/2, swivel unit, 495315 storage unit, adjustable stop, additional clamp, deflector FS-AW, in a box

MFT 3 accessories Scope of delivery Order No. 9 Adjustable stop MFT 3-AR for securing workpieces on the angle stop, can be folded up 495542 10 Additional clamp MFT 3-ZK for securing the stop rail to the V-groove 495541 11 Cross brace MFT 3-QT for additional support for the table, pack of 2 495502 12 Fixed clamps MFT-SP for secure and precise fixing of the workpiece, pack of 2 488030 13 Fastening clamps FSZ 120 polished steel version, clamping width: 120 mm, pack of 2 489570 Fastening clamps FSZ 300 polished steel version, clamping width: 300 mm, pack of 2 489571 14 Lever clamp FS-HZ 160 polished steel version, clamping width: 160 mm, pack of 1 491594 15 Guide extension MFT 3-VL makes possible use of CMS modules, foldaway legs, safety main switch, cable and power outlet 495510 16 VS connecting piece for connecting several MFT 3 484455 17 Perforated board MFT 3-LP Dimensions: length x width 1102 x 718 mm 495543

www.festool.com 21

2010_IMP_en_FB_WorkplaceOrg.indd 21 20.01.11 16:55 Guide rail Accessories and consumable materials.

Clamping | Fixing

1 2 3 4

FS guide rail

Stable base Protection | Storage

9 10 11 12

Guide rail Scope of delivery Order No. Guide rail FS 800/2 Length: 800 mm 491499 Guide rail FS 1080/2 Length: 1080 mm 491504 Guide rail FS 1400/2 Length: 1400 mm 491498 Guide rail FS 1900/2 Length: 1900 mm 491503 Guide rail FS 2400/2 Length: 2400 mm 491502 Guide rail FS 3000/2 Length: 3000 mm 491501 Guide rail FS 5000/2 Length: 5000 mm 491500 Guide rail FS FS 1400/2-LR32 with series of holes, length: 1400 mm 496939 Guide rail FS 2424/2-LR32 with series of holes, length: 2424 mm 491622

Guide rail accessories Scope of delivery Order No. 1 Quick-action clamp FS-RAPID/1 clamping jaws, fixed jaws, for clamping and positioning Festool guide rails 489790 FS and FS/2, pack of 1 2 Fastening clamps FSZ 120 polished steel version, clamping width: 120 mm, pack of 2 489570 Fastening clamps FSZ 300 polished steel version, clamping width: 300 mm, pack of 2 489571 3 Lever clamp FS-HZ 160 polished steel version, clamping width: 160 mm, pack of 1 491594 4 GECKO DOSH dual suction pad set DOSH-FSAD adapter, GECKO DOSH dual suction pad, load capacity: 50 kg 493507 GECKO DOSH dual suction pad load capacity: 50 kg 492617 Adapter DOSH-FSAD for attaching guide rail FS/2 to the GECKO dual suction pad 492616 Suction pads DOSH-SGT-S 493307

22

2010_IMP_en_FB_WorkplaceOrg.indd 22 20.01.11 16:55 More system accessories and consumables are available in the main catalogue.

Precision

5 6 7 8

Extension | System connection

13 14 15

Guide rail accessories Scope of delivery Order No. 5 SYSTAINER accessories FS-SYS/2 2 fastening clamps FSZ 120, deflector FS-AW, combination bevel FS-KS, 497657 kickback stop FS-RSP, connecting piece FSV, splinterguard FS-SP 1400, Systainer size SYS 1 T-LOC 6 Combination bevel FS-KS for FS/2, for angled cuts with the guide rail between 0° and 180° 491588 7 Kickback stop FS-RSP for TS 55, TS 75, ATF 55, AP 55, AT 65, AP 65, AP 85, used as a rear or front position stop on 491582 guide rail FS/2, can also be used as a guide stop 8 Splinterguard FS-SP 1400/T replacement splinterguard for guide rails FS and FS/2, transparent, length: 1400 mm 495207 Splinterguard FS-SP 5000/T replacement splinterguard for guide rails FS and FS/2, transparent, length: 5000 mm 495209 9 Slideway lining FS-GB 10M replacement slideway lining for guide rail, FS/2, 10 m roll 491741 10 cushion strip FS-HU 10M replacement adhesive cushion strip for guide rails FS and FS/2, 10 m roll 485724 11 FS-BAG for guide rails up to length FS 1400/2, carrier bag with shoulder strap, in a box 466357 12 Deflector FS-AW prevents suction hoses and cables from catching on the end of the guide rail 489022 13 Connector FSV connects two guide rails for longer workpieces, pack of 1 482107 LA-LR 32 FS for hole distance 9.5; 16; 32 mm, for connecting two perforated rails 496938 14 Parallel stop FS-PA stop ruler, clamp, adjustable stop, for sawing to width, adjustable repeat size using a scale and 495717 adjustable stop, assembly on guide rail without using any tools, max. workpiece width: 650 mm, pack of 2 15 Extension FS-PA-VL bridge, stop ruler, scale, can only be used in connection with FS-PA, max. workpiece width: 195 mm, 495718 max. material thickness: 70 mm, pack of 2

www.festool.com 23

2010_IMP_en_FB_WorkplaceOrg.indd 23 20.01.11 16:55 Energy box | Boom arm | Toolcenter TC 3000/2 | Workcenter Accessories and consumable materials.

Installation options EAA-EW energy box*

Upgrade from EW to EW/DW possible with compressed air supply unit 1 2 3 4/5

EAA-EW/DW energy box* 6

Arrangement: Hanging Holder: Machine | Hose Compressed air supply

7 8 9 10

Toolcenter TC 3000/2

Arrangement: Hanging

11 12 13 14 Workcenter WCR 1000

* EW= for use of power tools

EW/DW= for use of power tools and/or compressed air tools

24

2010_IMP_en_FB_WorkplaceOrg.indd 24 20.01.11 16:55 More system accessories and consumables are available in the main catalogue.

Energy box Scope of delivery Order No. Energy box accessories Scope of delivery Order No. EAA EW CT/SRM/M-EU 3 x 230 V connections, unoiled 583820 1 Ceiling suspension EAA-D-EU for energy box (models from 495890 compressed air connection, 2 x abrasive holder, manual slide 2009), cable set 2.5 m, compressed air hose 2.5 m, bracket operation, in a box 2 Wall mounting EAA-W-EU for energy box (models from 2009), 495889 EAA EW/DW CT/SRM/M-EU 3 x 230 V connections, compressed 583821 cable sets 4 m, compressed air hose 4 m, aluminium air supply unit with 3 DL connections (2 x oiled, 1 x unoiled), with reducing sleeve 2 x abrasive holder, 2 x tool holder, manual slide operation, in a box 3 Boom arms ASA ASA 2500 CT/SR-EU for CT mobile dust extractors and SRM 583866 extractors, swivellable arm with wall console, cable duct, no elements for wall mounting 4 ASA 5000 CT/SR-EU for CT mobile dust extractors and SRM 583867 extractors, double-jointed arm with wall console, cable duct, no elements for wall mounting Toolcenter Scope of delivery Order No. 5 ASA 6000 CT/SR-EU for CT mobile dust extractors and SRM 583868 TC 3000/2 hose holder, rubber mat, mobile sanding workplace 583881 extractors, double-jointed arm with wall console, cable duct, with large working and storage area, lockable tool cabinet no elements for wall mounting with intermediate base for storing Systainers and Sortainers, extractor dock with bracket attachment for CT, CTL, 6 Mobile dust extractors see catalogue, Internet, product range CTM 22/26/33/36, SR 200 and SR 45 with strap (accessory) for dust extraction

Workcenter Scope of delivery Order No. Workcenter WCR 1000 Base plate with Sys-Dock interface and 497471 Systainer holder, 2 grooved aluminium profiles, stepless Toolcenter accessories Scope of delivery Order No. height adjustment, 2 profiled covers, 2 pegboards with square 7 Rear wall TC 3000 RW for Toolcenter TC 3000, TC 3000/2, 452986 holes, storage shelf with 2 rails and 6 screwdriver holes, incl. 10 hanging hooks, dimension: length x width 990 x 340 mm incl. holder, universal hook, 6 standard hooks for square holes, 8 Tool holder WHR/D-TC for TC 2000, TC 3000, TC 3000/2, 493415 125 mm long, tip bent 90°, 1x machine holder for 2 machines for safe and ergonomic storage of up to two power or (V shape), with hose holder function, storage trough with holder compressed air tools for 80 mm wide sanding pad, storage base for pegboard 9 Hose holder TC-SH for the TC 2000, TC 3000, TC 3000/2 487304 10 Service unit VE-TC 3000 for TC 3000, TC 3000/2, for 454808 compressed air supply for mobile dust extractors CTL, CTM 22/26/33/36 and dust extractors SR 151, SR 200 series in LE design

Workcenter accessories Scope of delivery Order No. 11 Key WCR 1000 PF the keys make possible the assembly of 497476 individual accessories at the profiled nut, pack of 2 12 Universal hook WCR 1000 UH 497473 13 Square hooks WCR 1000 SHQ 497475 14 Tool hook WCR 1000 WH 497474 Arrangement: Place | Position 15 Storage shelf WCR 1000 PT 497472 16 Storage base WCR 1000 AB 497477

15 16

www.festool.com 25

2010_IMP_en_FB_WorkplaceOrg.indd 25 20.01.11 16:55 SYSTAINER | SORTAINER | Systainer-Port | Roll board Accessories and consumable materials.

SYS MINI

SYS 3-SORT/4

SYS 1/DF*

1 Roll board

SYS 2/DF*

SYS 3-SORT/6

SYS 3/DF* SYS-PORT 500/2

SYS 4/DF*

2 3 SYS 3-SORT/9

SYS 5

SYS 3-SORT/12

SYS MAXI SYS-PORT 1000/2

* DF = SYSTAINER with lid compartment

Every handle is a success – order reigns in a SYSTAINER for Special equipment – SYSTAINER with foam and wooden abrasives. The right abrasive, the right grit is found imme- inserts, as well as a SYSTAINER with removable plastic diately. Available for the most diverse abrasive dimensions, to safely store small parts, cutters and manual whether it‘s round, rectangular or triangular. tools. All inserts are also available separately.

26

2010_IMP_en_FB_WorkplaceOrg.indd 26 20.01.11 16:55 More system accessories and consumables are available in the main catalogue.

SYSTAINER Scope of delivery Order No. Systainer-Port Scope of delivery Order No. SYS MINI 460853 Systainer-Port SYS-PORT 500/2 no approval for installation 491921 SYS 1 TL 497563 in trucks, stable steel plate body, 5 label fields for drawers, with 3 Systainer pull-out drawers, without SYSTAINER SYS 1 TL-DF with lid compartment 497851 Systainer-Port SYS-PORT 1000/2 no approval for installation 491922 SYS 2 TL 497564 in trucks, stable steel plate body, 5 label fields for drawers, SYS 2 TL-DF with lid compartment 497852 with 5 Systainer pull-out drawers, with set of castors, 4 ball SYS 3 TL 497565 bearing-mounted steering rollers (2 have locking brake), SYS 3 TL-DF with lid compartment 498390 without SYSTAINER SYS 4 TL 497566 SYS 5 TL 497567 SYS MAXI 490701 SYS MAXI 2 492582 Systainer-Port accessories Scope of delivery Order No. 2 Telescopic drawer SYS-PORT/TA/2 5 labels for drawers 491923 SYSTAINER T-LOC with lid compartment Scope of delivery Order No. 3 Set of castors SYS-Port R/2 for mobile use of the Systainer- 491932 SYS 1 TL-DF with lid compartment 497851 Port, 4 ball bearing-mounted steering rollers (2 have locking SYS 2 TL-DF with lid compartment 497852 brake), diameter: 75 mm SYS 3 TL-DF with lid compartment 498390

SYSTAINER accessories Scope of delivery Order No.

1 Additional hand grip ZSG-SYS 1/2 TL/1 for SYSTAINER SYS 1 497856 SORTAINER Scope of delivery Order No. and 2 T-LOC, for carrying SYS 1 and 2 T-LOC upright 2 dividers per drawer, dimensions (L x W x H) 395 x 295 x 210 mm SYS 3-SORT/4 small drawer (L x B x D) 255 x 75 x 30 mm, medium 491522 drawer (L x B x D) 255 x 165 x 30 mm, large drawer (L x B x D) Roll board Scope of delivery Order No. 255 x 255 x 85 mm, 2 small drawers, medium drawer, large drawer, 6 label holders, 8 label strips, weight: 4.0 kg Roll board RB SYS 1-5 for transporting SYSTAINER in sizes 492388 SYS 3-SORT/6 medium drawer (L x B x D) 255 x 165 x 30 mm, 491984 1–5 and SORTAINER, with 4 ball bearing-mounted steering 6 medium drawers, 6 label holders, 8 label strips, weight: 4.9 kg rollers and locking brake, max. load: 50 kg SYS 3-SORT/9 small drawer (L x B x D) 255 x 75 x 30 mm, 491985 medium drawer (L x B x D) 255 x 165 x 30 mm, 6 small drawers, 3 medium drawers, 9 label holders, 16 label strips, weight: 5.1 kg SYS 3-SORT/12 small drawer (L x B x D) 255 x 75 x 30 mm, 491986 12 small drawers, 12 label holders, 16 label strips, weight: 5.3 kg

Secure storage and can be used at any time – for each machine there is a SYSTAINER with customised inserts. The machines are thus stored neatly and protected against impacts and dust. Together with all the required accessories they are ready for transportation at any time; long tooling times are dispensed with. www.festool.com 27

2010_IMP_en_FB_WorkplaceOrg.indd 27 21.01.11 17:04 TTS Tooltechnic Systems AG & Co. KG Wertstraße 20 D-73240 Wendlingen

represented by:

Festool GmbH Export Department Wertstraße 20 D-73240 Wendlingen Phone +49 (0)70 24/804-20640 Fax +49 (0)70 24/804-20724 E-mail [email protected] Web www.festool.com

Our tools live up to the claim “Made in Germany” – Tools for the toughest demands. Visit www.festool.com for more information

Festool service: Original from Festool with extended warranty of 3 years and comprehensive services. Visit www.festool.com for more information

Old tool return, , waste prevention. For a cleaner environment. Visit www.festool.com for more information

www.festool.com

Dealer Festool Workplace organisation Valid from 02/2011

Order No. 61178

Errors and omissions excepted. Products may differ from those pictured. Created for TTS Tooltechnic Systems AG & Co. KG, 73240 Wendlingen, 12/2010

2010_IMP_en_FB_WorkplaceOrg.indd 28 20.01.11 16:55