Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Copyright © 2019 EPLAN Software & Service GmbH & Co. KG EPLAN Software & Service GmbH & Co. KG assumes no liability for either technical or printing errors, or for deficiencies in this technical information and cannot be held liable for damages that may result directly or indirectly from the delivery, performance, and use of this material. This document contains legally protected information that is subject to copyright, trademark law, design law and other legal provisions. All rights are protected. This document or parts of this document may not be copied or reproduced by any other means without the express prior consent of EPLAN Software & Service GmbH & Co. KG. The software described in this document is subject to a licensing agreement and, if applicable, other contractual provisions. The utilization and reproduction of the software are only permitted in accordance with the specifications of this license agreement and, if applicable, any further existing contractual spec- ifications. RITTAL® is a registered trademark of Rittal GmbH & Co. KG. EPLAN®, EPLAN P8®, EPLAN Fluid®, EPLAN Preplanning®, EPLAN Pro Panel®, EPLAN Smart Wiring®, EPLAN Harness proD®, ePULSE®, eVIEW®, eBUILD, SYNGINEER and EPLAN Cogineer® are registered trademarks of EPLAN Software & Service GmbH & Co. KG. Windows 7®, Windows 8.1®, Windows 10®, Windows Server 2008 R2®, Windows Server 2012®, Win- dows Server 2012 R2®, ®, Microsoft Office®, Microsoft® Excel®, Microsoft® Access® and Notepad® are registered trademarks of the Microsoft Corporation (in accordance with the laws of the State of Washington). PC WORX®, CLIP PROJECT®, INTERBUS® and PROFINET® are registered trademarks of Phoenix Contact GmbH & Co. KG. AutoCAD® and AutoCAD Inventor® are registered trademarks of , Inc. STEP 7®, SIMATIC® and SIMATIC HW Config® are registered trademarks of Siemens AG. InstallShield® is a registered trademark of InstallShield, Inc. FLEXERA SOFTWARE LLC. Adobe® Reader® and Adobe® Acrobat® are registered trademarks of Adobe Systems Inc. Intel® is a registered trademark of Intel Corporation Citrix® is a registered trademark of Citrix Systems, Inc. TwinCAT® is a registered trademark of Beckhoff Automation GmbH. Unity Pro® is a registered trademark of Schneider Electric S.E. RSLogix 5000® and RSLogix Architect® are registered trademarks of Rockwell Automation Inc. All other product names and trade names are trademarks or registered trademarks of their respective owners. EPLAN uses the Open Source software 7-Zip (7z.dll), Version 16.00, Copyright © by Igor Pavlov. The source code of 7-Zip is subject to the GNU Lesser General Public License (LGPL). The source code of 7-Zip and details on this license can be found on the following Web site: http://www.7-zip.org EPLAN uses the Open Source software Open CASCADE, Version 7.3.0, Copyright © by Open CASCADE S.A.S. The source code of Open CASCADE is subject to the Public License. The source code of Open CASCADE and details on this license can be found on the following website: http://www.opencascade.org

2 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

EPLAN makes an import function available which uses eCl@ss. The use of the eCl@ss standard is subject to a license and requires registration and downloading in the download portal: http://www.eclassdownload.com EPLAN uses the dotNetRDF © library: http://www.dotnetrdf.org, Copyright (c) 2009-2013 dotNetRDF Project ([email protected]). The source code is subject to the MIT license: https://open- source.org/licenses/MIT EPLAN uses Google Chromium ©, Version 75. https://www.chromium.org, Copyright © 2015 The Chro- mium Authors. The source code is subject to the BSD license. EPLAN uses the Chromium Embedded Framework ©, Version 3770. https://bitbucket.org/chromiumem- bedded/cef, Copyright © 2008-2014 Marshall A. Greenblatt. Portions Copyright © 2006-2009 Google Inc. The source code is subject to the BSD license. EPLAN uses CEFSharp ©, Version 75. https://cefsharp.github.io, Copyright © The CefSharp Authors. The source code is subject to the BSD license. EPLAN uses Microsoft Unity ©, Version 4.0.1. https://github.com/unitycontainer/unity, Copyright © Mi- crosoft. The source code is subject to the Apache license, Version 2.0. This application incorporates software pursuant to a license agreement with Open Design Alliance. Open Design Alliance Copyright © 2002–2018 by Open Design Alliance. All rights reserved. EPLAN uses the PDFlib library, Version 9.2.0, Copyright © by PDFlib GmbH. Copyright reserved. EPLAN uses the PLOP library, Version 5.3p1, Copyright © by PDFlib GmbH. All rights reserved. The license management portion of this Licensee Application is based upon one or more of the follow- ing copyrights: Sentinel® RMS, © 2005 SafeNet, Inc., all rights reserved, and Sentinel® EMS, © 2009 SafeNet, Inc., all rights reserved. Sentinel® is a registered trademark of SafeNet, Inc. EPLAN uses the Open Source software QR Code generator library, Version 1.2.1. https://www.nayuki.io/page/qr-code-generator-library, Copyright © by Project Nayuki. The source code is subject to the MIT License. The complete license texts for the Open Source licenses mentioned above are available in the following file: \bin\License.txt

3 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Table of Contents

Introduction ······································································ 8 All from one provider: EPLAN Solutions ··············································· 9 EPLAN Harness proD ···································································· 14

User Interface ·································································· 15 Look & Feel ················································································· 15 Workflow & Integration ··································································· 15

Method ··········································································· 16

Function Description ························································ 17

Structure ········································································· 19 EPLAN Harness proD – Library ························································ 19 EPLAN Harness proD – Studio ························································ 19

Projects ·········································································· 20 2D Workdesk ··············································································· 20 3D Workspace ·············································································· 20 Variants ······················································································ 21 Options ······················································································· 21 Configurations ·············································································· 21

Multi-user ········································································ 21

API Interface ···································································· 22

Wire Harness Elements ····················································· 22 Plugs ·························································································· 22 Stop Part ····················································································· 22 Chamber Seal ·············································································· 23 Blanking Plugs ·············································································· 23 Splice ························································································· 23 Wires ·························································································· 23

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 4 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Cables ························································································ 23 Bundles ······················································································· 24 Surface Protection ········································································· 24 Item ···························································································· 24 Guiding Item ················································································ 24 Module / Device ············································································ 25 Label ·························································································· 25 Note ··························································································· 25 Cable Tie ····················································································· 25 Rapid Prototyping ·········································································· 26

Cable and Wire Harness Design ········································· 27 Measuring a Distance ···································································· 27 Active Dimensions ········································································· 27 Auto Route ·················································································· 27 Position Conditions ········································································ 27 Interactive Placement of Components ··············································· 28 Hiding / Showing and User-defined Views ·········································· 28 Tooltips ······················································································· 28 Organizing Items in Prototypes ························································ 28 Placing Additional Items Automatically ··············································· 28 Task List ····················································································· 29

Nailboard and Cable Drawing ············································· 29 Nailboard ····················································································· 29 Cable Drawing ·············································································· 30 Nailboard and Cable Drawing History and Change Checking ················· 30 Nailboard / Cable Drawing Export ····················································· 30 Plug Table ··················································································· 30 Splice Table ················································································· 30 Spider Diagram ············································································· 31

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 5 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Wire Table ··················································································· 31 List of Contents for Cables / Bundles ················································· 31 Bill of Materials Table ····································································· 31 Wire Harness Table ······································································· 31 Cable Units Table ·········································································· 31 Drawing Notes Table ····································································· 32 Surface Protection Table ································································ 32 Surface Protection Legend ······························································ 32 Layer ·························································································· 32

Report ············································································ 33 Translation ··················································································· 33

Import / Export ································································· 34 Importing a 3D Model ····································································· 34 Exporting a 3D Wire Harness Model ················································· 36 EPLAN ERP/PDM Integration Suite ·················································· 36 Data Exchange with EPLAN Electric P8 ············································· 37 Importing Images ·········································································· 37 Importing Plugs ············································································· 37 Importing Wires ············································································ 38 Importing Bundles ········································································· 38 Importing Drawings in DXF and DWG Format ····································· 38

Global Searching ······························································ 39

Hardware Requirements ···················································· 40 Workstation ·················································································· 40 Recommended Workstation Configuration ·········································· 40 Network ······················································································ 40 Multi-user ···················································································· 41

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 6 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Software Approvals ·························································· 41 Operating Systems ········································································ 41

Licensing Overview ·························································· 43

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 7 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Introduction

EPLAN offers Engineering software and service in the fields of electrical engi- neering, automation and mechatronics. We develop one of the world's leading software solutions for engineering, plant engineering and enclosure design. EPLAN is also your ideal partner for simplifying challenging engineering pro- cesses. Standardized and individual ERP and PLM/PDM interfaces ensure con- sistent data for your entire value chain.

Working with EPLAN means unrestricted communication across all engineering disciplines. Whether small or large companies: Our customers can use their ex- pertise more efficiently. EPLAN aims to keep growing with you, our customers and partners, and drives the integration and automation in engineering. "Effi- cient Engineering" is our motto.

EPLAN was founded in 1984 and is part of the Friedhelm Loh Group. The fam- ily-owned company is present worldwide with 18 production facilities and 80 in- ternational subsidiaries.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 8 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

All from one provider: EPLAN Solutions

EPLAN supports you with establishing your engineering across multiple disci- plines. The basis is formed by the EPLAN platform that interconnects our soft- ware solutions. For you this means a clear increase in efficiency when it comes to working on your EPLAN project. Since your digital data flow seamlessly from solution to solution and are enriched further in every process step.

With EPLAN ePULSE an innovative Cloud solution is furthermore available that, for example, provides a tangible added value for projects across all your locations. Together the EPLAN platform and EPLAN ePULSE form EPLAN So- lutions - or, in other words: the key for your future-oriented engineering.

EPLAN offers a comprehensive framework for your daily work. This way inter- faces allow the bidirectional exchange with ERP and PDM systems. With the connection to mechatronic processes you expand your view to a mechatronical engineering perspective. With neutral interfaces you can transfer the EPLAN project data into other software environments and continue working on them.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 9 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Extensions and modules for all cases

No matter to what extent you are already working with EPLAN solutions in your company and which requirements have to be fulfilled in the future: Extensions in all process directions can be implemented easily thanks to the add-on con- cept of EPLAN - flexibly and individually for your tasks.

In addition EPLAN offers comprehensive extension modules - called Elements - that as a rule are combined into service packages. You can find a comprehensive overview of the current extension modules in the licensing overview. Should you have any further questions on this topic, please don't hesitate to ask your EPLAN contact person.

EPLAN Electric P8

With EPLAN Electric P8 you configure your electrical design for machines and plants in an engineering system consistently, coherently and quickly. The soft- ware supports diverse engineering methods: from manual creation to standard- ized and template-based work. EPLAN Electric P8 automatically creates de- tailed reports for you as an integral part of the project documentation - if desired continuously or bundled after project completion. This way you supply the downstream process steps with all required information from the engineering process.

EPLAN Fluid

EPLAN Fluid is your engineering tool, especially for the configuration and auto- mated documentation of circuits of fluid-power plants in the fields of hydraulics, pneumatics, cooling and lubrication.

EPLAN Preplanning

EPLAN Preplanning allows you to already acquire engineering data in the pre- planning phase. This, for example, includes the actuators and sensors of a plant, machine or a building. You can import data both from external tabular sources as well as plant and machine overviews and furthermore graphically acquire process and instrumentation diagrams. You can also access data that have been collected and enriched in EPLAN Preplanning for downstream plan- ning phases in the engineering.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 10 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

EPLAN Pro Panel

With EPLAN Pro Panel Professional you conceive and design control system enclosures, switchgear and power distribution systems for the energy supply in 3D. This way you can solve diverse engineering tasks in one software: from the electrical schematic creation through the planning of the mounting layout in 3D to the virtual routing of connections. A variety of data and information for the manufacturing are provided in an automated way - from the component labeling to the support of manual wiring processes.

EPLAN Smart Wiring

EPLAN Smart Wiring is your virtual assistant for manual wiring in the enclosure production. From the connecting point to the exact routing track, the software provides you - as the wirer - with all the required information in digital form - if necessary, also in 3D. You can note the status of the wiring with the traffic light principle. If you need to reassure yourself, you can call up the electrical sche- matic and counter-check it - on the basis of each individual connection. The provision of the project data on a central server makes it possible to manufac- ture many identical enclosures in parallel or work together with several wirers.

EPLAN Harness proD

Use EPLAN Harness proD for the efficient design and documentation of cables and wire harnesses in 3D and 2D. With the software you automate the typical work processes in cable and wire harness design – from the importing of the connection information from the EPLAN platform through the intuitive routing up to the creation of manufacturing documentation. The software is open for MCAD systems and can in this way be seamlessly integrated into existing sys- tem landscapes.

EPLAN Cogineer

With EPLAN Cogineer you gain the full potential from your engineering in a short time as well as increase the quality of your electrical and fluid-power doc- umentation. You use the switching templates you have already created to struc- ture a macro library and with EPLAN Cogineer realize the automatic schematic creation at the push of a button.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 11 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

EPLAN Engineering Configuration (EEC)

With EPLAN Engineering Configuration (EEC) you illustrate your product portfo- lio in a modular system with interdisciplinary function units. On this stable basis, EEC becomes your tool for the design and application of configuration user in- terfaces as well as the automated creation of documentations. The interdiscipli- nary working method integrates sales, order processing, mechanical engineer- ing, electrical engineering and control technology as well as production and documentation.

EPLAN ERP/PDM Integration Suite

Continuous data flows ensure transparency in the product development pro- cess. Through the EPLAN Integration Suite, EPLAN manages the integration into existing ERP, PDM and PLM system landscapes. You can optimize your work processes from the schematic through to the master data. The quick and individual provision of the data takes place in bidirectional exchange with the systems, without you having to leave the work environment within the EPLAN platform.

EPLAN ePULSE

The open, cloud-based engineering system brings together data and projects, disciplines as well as engineers in a world-wide network.

The portfolio of EPLAN ePULSE is developed and extended continuously:

 With EPLAN eVIEW the EPLAN project becomes available everywhere, at any time and securely in the cloud. This way you can easily share and comment your project with other participants.  The EPLAN Data Portal provides access to valuable manufacturer data.  Compiling schematics from a template library with a few clicks is now also directly possibly in the web browser with EPLAN Cogineer. A Free- mium version of EPLAN eBUILD is now automatically available to users of EPLAN ePULSE.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 12 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

EPLAN Data Portal

With the EPLAN Data Portal you have direct online access to high-quality prod- uct catalogs of numerous component manufacturers. All the solutions anchored in the EPLAN platform access this Web service equally. Simple transfer of the offered components per "Drag & Drop" into the EPLAN documentation reduces the required configuration work and increases the quality of the machine and plant documentation. The representation of a device in different plant plans is always based on a consistent source.

EPLAN eVIEW

With EPLAN eVIEW, the EPLAN project now goes into the Cloud and is also available in downstream processes for all persons involved in the project - from engineering through production and mounting up to service and maintenance. With EPLAN eVIEW you can view project data and comment changes via browser independently of the location. This enables easy collaboration as well as communication. Information and changes are transparent throughout the en- tire data value chain.

Note: The properties and functionalities specified in this performance description are based on the maximum scope of performance of the product including all exten- sion modules, Elements and add-ons. Extension modules, Elements and add- ons are available optionally and separately and as a rule cost an additional fee. For further details of the available product variants please refer to the "Licens- ing Overview" chapter.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 13 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

EPLAN Harness proD

EPLAN Harness proD is a leading technological expert solution for efficient de- signing of wire harnesses in 3D and 2D, determination of the connection lengths and bundle diameters as well as provision of the documentation for or- der processing, materials planning and manufacturing.

EPLAN Harness proD automates the typical work processes in cable and wire harness design – from the importing of the wiring information from the EPLAN Platform through the automated routing and interactive routing of connections up to the creation of manufacturing documentation including nailboard drawings and cable drawings. EPLAN Harness proD combines the data of mechanical and electrical design into one system – thus merging optimally into the existing work processes.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 14 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

User Interface

Look & Feel

The system provides an intuitive user interface. Windows-compatible operation with functionalities such as Tooltips, toolbars, and Online Help allow beginners and occasional users to get to grips quickly.

Supported by innovative handling concepts the user can focus on their actual work – engineering. The user interface customized to the task at hand allows efficient and rapid project planning.

Workflow & Integration

The system can be configured by means of settings to meet the needs of the user, company, and project. The result: The workflow is accelerated and the re- quired work result achieved efficiently.

You also have access to an extensive online didactic help system which pro- vides efficient work support.

Diverse data formats as well as proprietary and native CAx data interfaces are available as interfaces for exchange with other CAx systems.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 15 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Method

EPLAN Harness proD reflects the specific working method and methodology of an engineer in the context of wire harness design – thus ensuring the highest possible effectiveness within the product creation process.

This should be differentiated as follows:

 Design of wire harnesses in a 2D working environment – with and without the support of externally provided and imported environmental models and / or connection information.  Design of wire harnesses in a 3D working environment – with and without the support of externally provided and imported environmental models and / or connection information.  Generation of manufacturing documentation in the form of nailboard drawings, cable drawings, material lists, bills of materials, cable dia- grams, weight and cost calculation on the basis of the data from the 2D / 3D wire harness. The work method changes frequently or is combined between individual pro- jects but also during the project phases.

The program is designed so that editing in the system can always follow the ac- tual course of the project. The system allows the project to be edited at any time from different views. This releases new potential productivity in engineer- ing and also increases transparency.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 16 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Function Description

EPLAN Harness proD provides the following scope of performance:

Project management Clearly structured management of all documents of a wire harness project.

Variants and options Extensive possibilities for creating and managing wire harness variant and op- tions within a project.

Nailboard Automatic derivation of nailboard drawings from the designed 2D / 3D wire har- ness.

Cable drawing Automatic derivation of cable drawings from the designed 2D / 3D cable unit.

Bills of materials Creation of user-defined materials lists / bills of materials, cable diagrams as well as determination of time, costs and weight.

Wire harness design in 2D Individual wire harness design in a 2D working environment.

Cable design in 2D Individual cable design in a 2D working environment.

Wire harness design in 3D Individual wire harness design in 3D, freely in space or on the basis of a virtual 3D environment model.

Cable design in 3D Individual cable design in 3D, freely in space or on the basis of a virtual 3D en- vironment model.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 17 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

MCAD coupling Import of 3D models from the common 3D mechanical systems on the basis of native and proprietary data formats. Standard 3D- exchange formats are sup- ported.

Item data Creation and management of item data and parts information.

System integration As an open engineering system EPLAN Harness proD provides manifold possi- bilities for integration into the product creation process through data exchange interfaces.

EPLAN Harness proD is available in the following module packages and with diverse extension modules:

EPLAN Harness proD Combined 2D and 3D wire harness design. Available in the module packages 1001, 3002 and Professional

EPLAN CAD Translator Importing of CAD environmental models from third-party systems. Extension module for EPLAN Harness proD.

EPLAN Harness API Runtime Allows the automation of standard functions and development of own plug-ins. Extension module for EPLAN Harness proD.

1 100 connections per Workspace / Workdesk 2 300 connections per Workspace / Workdesk

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 18 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Structure

EPLAN Harness proD is divided into two fields. A dedicated program exists for each field.

EPLAN Harness proD – Library

The EPLAN Harness proD Library is used for the creation and management of libraries. The library allows the definition and management of the master data required for wire harness designed and the parts for use in EPLAN Harness proD Studio. The most common information for the part can be recorded. In ad- dition, style libraries for the realistic 3D representation of materials and 2D hatches for 2D representation of materials can be created. Additional docu- ments (specifications, descriptions, images, etc. …) can be attached to each item of the library. These are available during the further editing process. Existing master data can be imported. Master data can be stored in categorized and structured form.

EPLAN Harness proD – Studio

EPLAN Harness proD Studio is the central working environment for the devel- opment of a wire harness in a 2D and / or 3D working environment. Data and documents are organized in projects within the Studio. The Workdesk repre- sents the 2D working environment, the Workspace represents the 3D working environment.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 19 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Projects

A project combines the elements of the wire harness design and can contain several variants, Workspaces, Workdesks, nailboards, cable drawings and re- ports.

Projects can be created based on templates. These can contain connections, electrical options, variants (including electrical configurations) and settings.

Snapshots of a project document can be created. This makes it possible to maintain various versions of the project documents.

User-defined properties can be defined for a project.

A project can contain external documents. This allows project-specific docu- mentation to be managed together with the project.

2D Workdesk

The Workdesk is the 2D working area in which the development of the wire har- ness is carried out in 2D.

EPLAN Harness proD generally allows the definition and management of sev- eral 2D working areas in a project. Several versions of a Workdesk can be cre- ated.

3D Workspace

The Workspace is the working environment in which the development of the wire harness is carried out in 3D.

EPLAN Harness proD generally allows the definition of several 3D workdesks in one project. Several versions of a Workspace can be created.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 20 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Variants

Variants serve to represent different "mechanical" configurations of the environ- mental model in whose context the wire harness is planned.

Variants can furthermore encompass various electrical configurations.

Options

Several options can be defined within a variant. Options serve to define various forms of the wire harness and to maintain them as required.

Configurations

A configuration consists of a combination of various options.

Nailboard drawings, cable drawings and reports can be created configuration- specifically.

Multi-user

EPLAN Harness proD allows several users to work parallel on the same pro- ject.

A project document (Workspace, Workdesk, nailboard, cable drawing, report) can be opened for one user respectively for editing. Further users can only open the respective document write-protected.

Changes to the project structure (for example new Workspace) by a user be- come visible for the other users as soon as the user who carried out the change stores the project.

If a user changes to the view of the project structure after the structure has been changed by another user, the project structure is first reloaded.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 21 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Please contact EPLAN Support with regard to the hardware requirements for multi-user operation. We can advise you specifically according to your individ- ual requirements.

API Interface

EPLAN Harness proD 2.9 allows the user to automate standard functions via an API and program own plug-ins.

Programming and usage are possible with the "EPLAN Harness proD API Runtime" module.

Wire Harness Elements

The elements required for the design of a wire harness are available to the user.

Plugs

In EPLAN Harness proD the term "plug" serves as a general generic term for components to which wires can be connected. These can, for example, also be terminal strips, relays or other components.

Stop Part

A stop part is a crimp contact that is applied to the conductor material of a wire.

In EPLAN Harness proD stop parts can be defined at the plug and assigned to the connected wires.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 22 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Chamber Seal

Chamber seals are connected with chambers and wire on order to establish a seal between the chamber and wire.

In EPLAN Harness proD chamber seals can be placed if a wire is connected to the pin / the chamber.

Blanking Plugs

A blanking plug closes the unused chambers of a plug. In EPLAN Harness proD blanking plugs can be added to a pin to which no wires are connected. This functionality is most commonly used at plugs that have to be protected against the ingression of water.

Splice

A splice designates a connection (for example luster terminal, ground distribu- tor, ferrule, etc.) between two or more lines. The splice ensures both a mechan- ical connection as well as the conductivity.

Splices can be placed on bundles and their subordinate objects.

Wires

Wires represent the electrical connection in the wire harness. They are availa- ble to the user with their typical properties. Wires can be routed singly or in a bundle.

Cables

Cables consist of several wires that can each be connected separately. Func- tionalities for routing cables are available to the user.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 23 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Bundles

The bundle represents the routing track of the individual wires. It can be routed on the 2D level or in the 3D space. Wires or cables can be routed through the bundle. A surface protection can be assigned to a bundle.

Surface Protection

The following objects are available as surface protection for bundles: Surface protection, sheath, insulation tape, flexible pipes / tubes, braided tube and shrink sleeve. A realistic 3D representation of various types can be created through the definition of a style in the style library. The creation of 2D proto- types that can be used to represent the various surface protection types on the nailboard drawing is also possible in the style library.

Item

The "Place item" command is used to insert purely mechanical items, chamber housings or plug housings in the Workspace / Workdesk.

Guiding Item

The "guiding item" is used to fasten wires and bundles / cables, to protect them or to specify their course. This can for example be a clip, fitting or a grommet. As soon as guiding items have been placed, an additional functionality is availa- ble with which the guiding item can be connected with other objects, for exam- ple bundles and wires.

Wires, cables and bundles can be drawn through a guiding element or fastened to a clip point with the functionalities "Semiautomatic routing", "Manual routing", "Route path segment" and "Merge control points".

Note: Only the commands "Route path segment" and "Connect control points" can be used to fasten wires, cables and bundles to a clip point.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 24 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Module / Device

A module or a device consists of several library objects that are combined into a functional unit. These units can then be placed in the Workspace / Workdesk.

Every module / device can contain several different combinations. A concrete combination is selected respectively for the placement in a Workspace / Work- desk.

Label

A label is a hanger or sticker used to identify wires or bundles.

Labels can be attached to bundles (also with surface protection), cables and wires.

Note

Remarks can be used to describe an object in more detail.

Cable Tie

Cable ties can be placed on bundles (also with surface protection).

Cable ties can be mounted several times and in a defined number / with a de- fined distance on a object.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 25 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Rapid Prototyping

EPLAN Harness proD offers Rapid Prototyping items (= RP parts) RP wire, RP cable, RP flat cable, RP plug, RP flat connector and RP splice.

Rapid Prototyping items do not have to be created in the EPLAN Harness proD Library, but are rather generated directly in EPLAN Harness proD when re- quired.

Rapid Prototyping parts are available both in the Workspace and in the Work- desk and are included and reported in reports and Nailboards.

In the course of the project work Rapid Prototyping items can be replaced by items from the library.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 26 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Cable and Wire Harness Design

Measuring a Distance

You can measure distances in order to check a design in the EPLAN Harness proD Workspace / Workdesk environment. The temporarily displayed distance disappears when another command is activated.

Active Dimensions

Active dimensions are inserted with the elements wire, cable, flat cable, bundle and surface protection in the Workdesk. A single active dimension is placed in the path segment, meaning between two neighboring control points each.

Auto Route

This command can be used to route unrouted wires automatically through bun- dles, surface protection, sheaths, insulation tapes, flexible pipes / tubes and guiding items.

Instead of automatically, routing can be carried out manually, semi-automati- cally or individually and path-specifically.

Position Conditions

A group of objects is often defined on the basis of relative positions and fixed distances. When the superior object is moved, all the dependent objects are also moved as a group automatically. This powerful functionality allows the cre- ation of condition chains and thus reduces the time required for the positioning of individual items. It also offers the possibility of later editing individual objects that are already placed.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 27 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Interactive Placement of Components

A preview is available for the entire placement process of 3D objects. This means that all the objects can be placed directly at the suitable positions. Revi- sion work that may be required can be reduced through this. In many cases re- vision work may no longer be required.

Hiding / Showing and User-defined Views

The perspective and the set visibility of objects can be stored in user-defined views. These stored views are available for later usage.

Tooltips

The user can obtain some important item data from a so-called tooltip. This is displayed when the mouse is "moved over" the item.

Organizing Items in Prototypes

Items can be organized in prototypes in the 3D environment. These prototypes can be changed later.

Placing Additional Items Automatically

If additional items (stop parts, chamber seals or blanking plugs) are defined for plugs in the library, these are added or removed automatically in accordance with special rules and conditions.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 28 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Task List

EPLAN Harness proD allows the Workspace / Workdesk to be checked for er- rors. The results of this check are shown in the task list.

The task list provides an overview of the active tasks in the Workspace / Work- desk. It is possible that not all the active tasks are completed automatically. EPLAN Harness proD therefore also allows interactive manual editing in addi- tion to the automated processing of active tasks. Tasks that result during the import are also listed in the task list.

Nailboard and Cable Drawing

Nailboard

EPLAN Harness proD allows the creation of 2D nailboard drawings. Nailboards can be created with existing background objects and defined settings by means of templates.

The Nailboard is derived from the Workspace / Workdesk. The Nailboard has the same information status as the Workspace / Workdesk at the time of deriva- tion. The Nailboard is not updated automatically when work is continued in the Workspace / Workdesk. Synchronization between the Workspace / Workdesk is carried out manually at the desired moment by the user.

Segments can be adapted graphically at Nailboards that were derived from a Workspace (3D).

Graphical adapting of the segments is not possible at Nailboards that were de- rived from a Workdesk (2D).

Manufacturing drawings can be completed through the inclusion of labelings such as wire numbers, bills of materials, working instructions or DXF files for pin or plug images.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 29 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Cable Drawing

EPLAN Harness proD allows the creation of 2D cable drawings, so-called cable drawings. Cable drawings can be created with existing background objects and defined settings by means of templates.

The cable drawing is derived from the Workspace / Workdesk. The cable draw- ing has the same information status as the Workspace / Workdesk at the time of derivation. The cable drawing is not updated automatically when work is con- tinued in the Workspace / Workdesk. Synchronization between the Workspace / Workdesk is carried out manually at the desired moment by the user.

Manufacturing drawings can be completed through the inclusion of labelings such as wire numbers, bills of materials, working instructions or DXF files for pin or plug images.

Nailboard and Cable Drawing History and Change Checking

Differences that exist between two nailboard drawings or cable drawings can be found automatically. The user can select the objects that are to be compared from a specified list. This allows changed or added items to be identified.

Nailboard / Cable Drawing Export

A nailboard and a cable drawing can be exported into the following formats: DXF, DWG, SVG, PS, PDF, JPG, BMP, GIF, PNG, TIFF, RGB.

Plug Table

A plug table contains information about the pins and the connected wires.

Splice Table

A splice table contains information about the splice and the connected wires.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 30 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Spider Diagram

A spider diagram shows the wires connected to a splice and information about the pins used.

Wire Table

A wire table contains information about wires as well as the connected plugs and their pins.

List of Contents for Cables / Bundles

A list of contents for cables / bundles contains information about passing ele- ments at a selected check point of a bundle or cable.

Bill of Materials Table

A table that lists the items used. The table furthermore contains corresponding properties of the library parts.

Wire Harness Table

The table contains information about all the wire harnesses as well as the asso- ciated part numbers, ERP numbers and data sources that are represented on the drawing.

Cable Units Table

The table contains information about all the cable units as well as the associ- ated part numbers, ERP numbers and data sources that are represented on the drawing.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 31 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Drawing Notes Table

The table contains drawing notes that are read in from an external file. The ta- ble allows uniform customer-specific notes to be represented on the drawings.

Surface Protection Table

A table that lists the surface protection used and the associated properties such as the length, width etc.of a Nailboard drawing.

Surface Protection Legend

A legend in the form of a simple table that lists the prototype and the type.

Layer

Layers serve to structure the graphical objects of a project, to separate them and to control their graphical representation.

Layers can be defined as visible, invisible, selectable or not selectable. The layer technique makes working with many objects simpler and better structured.

This layer-oriented structuring of the graphical objects of a project makes it pos- sible to work on specific objects, without interfering with other objects or chang- ing them unintentionally. All-in-all layer technique provides a better overview for the graphical editing of objects.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 32 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Report

EPLAN Harness proD Report supplies automatic evaluations in the form of so- called reports.

The following reports can be selected in the context of the selected Workspace / Workdesk:

 Module / device report  Bill of materials  Cable report  Wire harness report  Cable units report  Plug report  Splice report  Surface protection report  Wire list report. You can specify per report type which columns, i.e. properties are to be dis- played. The available properties differ from report to report, because the re- ported objects as a rule have different properties.

Templates can be used to create reports with pre-defined settings.

Reports can be exported in the formats *.txt, *.xls, *.xml and *.csv.

Translation

EPLAN Harness proD offers the possibility to translate the column headers and descriptions in Nailboards and Cable drawings (tables) as well as reports, irre- spective of the language of the program user interface. The languages German, English, Russian, Japanese, Italian, French and Simplified Chinese are availa- ble by default. The user can add further languages as required.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 33 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Import / Export

Importing a 3D Model

3Dmodels can be imported into a Workspace / Workdesk on the basis of vari- ous formats. The most important elements of the geometry are recognized au- tomatically during importing and are processed for future use.

EPLAN Harness proD supports the file formats specified here and the prede- cessor version.

DASSAULT SYSTEMES

Format Version File extension

CATIA V4 4.2.5 MODEL, SESSION

CATIA V5 V5-6R2018 CATPRODUCT, CATPART, CGR

CATIA V6 2013 3DXML

SolidWorks 2018 ASM, SLDASM, SLDPRT

ACIS 2018.1 SAT, SAB

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 34 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

SIEMENS

Format Version File extension

13.x (NX 5), NX I-deas MF1, ARC, UNV, PKG I-deas 6

JT 10 JT

UnigraphicsNX V11.0 to NX 12 PRT

Parasolid V30.1 X_B, X_T, XMT_TXT

Solid Edge V19, V20; ST – ST10 ASM, PAR, PWD, PSM

PTC

Format Version File extension

Pro/Engineer 19.0 to Creo – Pro/Engineer ASM, NEU, PRT, XAS, XPR Creo 5.0

Autodesk

Format Version File extension

Autodesk Inventor 2018 IPT, IAM

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 35 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Other

Format Version File extension

IGES 5.1, 5.2, 5.3 IGS, IGES

PRC Most recent version PRC, PRD

VRML V1.0 and V2.0 WRL, VRML

Wavefront - OBJ

Stereolitography Most recent version STL

AP 203 E1/E2, AP STEP STP, STEP 214, AP 242

ACIS 2018.1 SAT, SAB

JTOpen 10 JT

Exporting a 3D Wire Harness Model

3D wire harness designs can be exported from the Workspace in different for- mats.

Supported file formats:

STEP (*.stp); IGES (*.igs); (*.x_t); PRC (*.); ACIS (*.sab, *sat), JTOpen (*.jt)

EPLAN ERP/PDM Integration Suite

EPLAN Harness proD supports the EPLAN ERP/PDM Integration Suite. Through the EPLAN ERP/PDM Integration Suite, that has to be purchased sep- arately and to be licensed separately, you have an interface to the common ERP and PDM systems on the market.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 36 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

If you are interested in this product, please request the corresponding perfor- mance description.

Data Exchange with EPLAN Electric P8

Exchanging of connection and library data with EPLAN Electric P8 is possible.

Importing Images

Images in different formats can be imported into the Workspace / Workdesk en- vironment.

The following formats are supported:

*.bmp; *.gif; *.jpg; *.jpeg; *.png; *.rgb; *.tiff

Importing Plugs

Plugs can be imported into the Workspace / Workdesk.

Importing of plugs can be used to simplify the project work. You can define the plugs to be imported in a file (txt or csv). The plug name after the import, posi- tion and alignment have to be specified.

If the defined plug does not exist in the active Harness proD library, Rapid Pro- totyping plugs can be used instead.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 37 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Importing Wires

Use this functionality to import wires into the Workspace / Workdesk.

The project work can be facilitated through the wire import. You can define in a text file (txt or csv) which wires from the library are to be used, which name the wires are to have after the import and to which plugs they are to be connected.

If the wires do not exist in the active Harness proD library, Rapid Prototyping wires can be used instead.

Importing Bundles

Bundles can be described simply by means of a text file and integrated into any existing Workspace / Workdesk.

Importing Drawings in DXF and DWG Format

This functionality allows a DXF or DWG file to be imported into the Workdesk environment.

The desired position as well as the extent (width and height) can be defined in- dividually while retaining the page ratio.

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 38 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Global Searching

The "Global search" functionality allows specific components or object proper- ties within the documents to be found.

The search query can be made up of two conditions.

Condition 1: The type filter – this limits the search to the selected elements.

Condition 2: The (library) name of a component or a property of an object or, for example, its value.

Both conditions are ANDed, meaning that both conditions have to apply to an element in order for it to be part of the result. Search queries defined in this form can be "added to a selection record".

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 39 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Hardware Requirements

Workstation

The computer platform is a PC with an Intel Core i5, i7, i9 or compatible proces- sor. Rather select a high-speed computer with less CPU cores than a slower computer with more CPU cores.

Recommended Workstation Configuration

Processor: Multicore CPU, not older than 3 years RAM: 16GB Hard disk: 500 GB (SSD) Monitor / graphics resolu- 2-screen solution with a resolution of at least 1280 x 1024 recom- tion: mended 1920 x 1080 3D display: Dedicated graphics card from AMD (ATI) or Nvidia with current *1 Direct3D 11+ / OpenGL 2+ driver with 2GB RAM

*1: A graphics card comparable with an Nvidia Quadra 600 or higher should be used for EPLAN Pro Panel / EPLAN Harness proD.

Network

We recommend using a Microsoft Windows network.

Net transfer rate of the server: 1 Gbits/s Net transfer rate of the client computer: 100 Mbits/s

Recommended latency < 1 ms

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 40 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Multi-user

With regard to minimum requirements for multi-user operation, please contact EPLAN Support. We can advise you specifically according to your individual re- quirements.

Software Approvals

In the current Version 2.8 the programs of the EPLAN platform are only availa- ble as a 64-bit version.

Operating Systems

EPLAN Harness proD supports the 64-bit variants of the Microsoft operating systems Windows 7, Windows 8.1 and Windows 10. The EPLAN user interface language installed must be supported by the operat- ing system. The following are required for the operation of EPLAN Harness proD:

 Microsoft .NET Framework 4.5.2  Microsoft Visual C++ 2013 Redistributable Package  Microsoft Visual C++ 2015 Redistributable Package  DirectX 9 Runtime

The program is identified by EPLAN as compatible in accordance with the re- quirements specified in this performance description on the following operating systems:

Workstation  Microsoft Windows 7 SP1 (64 bit) Professional, Enterprise, Ultimate  Microsoft Windows 8.1 (64 bit) Pro, Enterprise  Microsoft Windows 10 (64 bit) Pro, Enterprise Build 1709  Microsoft Windows 10 (64 bit) Pro, Enterprise Build 1803

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 41 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Server  Microsoft Windows Server 2012 (64 bit)  Microsoft Windows Server 2012 R2 (64 bit)  Microsoft Windows Server 2016 (64 bit)

Citrix-Server  Terminal-Server with Citrix XenApp 7.15 and Citrix Desktop 7.15

The described functionalities are only available for certain module packages. See the Licensing Overview chapter. 42 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

Licensing Overview

 Standard functionality O Optional - Not available

proD EPLAN Harness proD 100 300 Prof.

EPLAN Harness proD Library   

EPLAN Harness proD Workdesk 100*1 300*2 

EPLAN Harness proD Workspace 100*1 300*2 

EPLAN Harness proD Nailboard   

EPLAN Harness proD Cable Drawing   

EPLAN Harness proD Report   

Variants and Options - - 

EPLAN CAD Translator O O O

EPLAN Harness proD API Runtime O O O

1 100 connections per Workspace / Workdesk 2 300 connections per Workspace / Workdesk Errors and changes reserved.

43 Performance Description Contents: EPLAN Harness proD Version 2.9 Status: 12/2019

44