CATEGORY - ADVERTISING STANDARDS (4) PAGE PRICE 1. GYS 65-1: 2006 Requirements for advertising - Part 1: General. 19 5,500 CCS….: 2006 2. GYS 65 – 2: 1997 Requirements for advertising – Part 2: Advertising to children. 5 4,000 3. GYS 65 – 3: 1997 Requirements for advertising – Part 3: Advertising of cigarettes. 14 5,000 4. GYS 198: 2001 Television broadcasting. 26 6,600 (BETS 3, Issue 2, December, 1997) CATEGORY - AGRICULTURE STANDARDS (28) PAGE PRICE
1. GYS 1: 2004 Specification for limes. 8 4,000 (First Revision) 2. GYS 2: 2010 Specification for grades of fresh agricultural produce – Part 7: 8 4,000 CRS 24: Part 7: Pineapple. 2010/2nd Revision 3. GYS 3: 2010 Specification for grades of fresh agricultural produce – Part 8: 6 4,000 CRS 24: Part 8: Pumpkins 2010/1st Revision 4. GYS 4: 1994 Specification for grades of watermelon. 4 3,300 5. GYS 5: 1994 Specification for grades of cucumber. 3 3,300 6. GYS 6: 1994 Specification for grades of fresh ginger. 3 7. GYS 7: 2010 Specification for grades of fresh agricultural produce – Part 4: 6 4,000 CRS 24: Part 4: Hot peppers. 2010/ 1st Revision 8. GYS 8: 2010 Specification for grades of fresh agricultural produce – Part 2: 6 4,000 CRS 24: Part 2: Cabbages. 2010/1st Revision 9. GYS 9-18: 2005 Specification for labelling of commodities – Part 18: Labelling 6 4,000 of seeds. 10. GYS 24: 1995 Specification for grades of green plantain. 3 3,300 11. GYS 25: 1995 Specification for grades of sweet orange. 3 3,300 12. GYS 26: 2010 Specification for grades of fresh agricultural produce – Part 5: 7 4,000 CRS 24: Part 5: Mangoes. 2010/2nd Revision 13. GYS 27: 2010 Specification for grades of fresh agricultural produce – Part 3: 9 4,400 CRS 24: Part 3: 2010 Grapefruits. 14. GYS 59: 1996 Specification for carambola. 7 4,000 15. GYS 60: 1996 Specification for grades of sweet potatoes. 4 3,300 16. GYS 61: 1996 Specification for grades of eddo. 4 3,300 17. GYS 62: 1996 Specification for grades of boulanger (Eggplant). 4 3,300 18. GYS 63: 1996 Specification for grades of avocado. 4 3,300 19. GYS 64: 1996 Specification for grades of passion fruit. 4 3,300 20. GYS 73: 1997 Specification for grades of cowpea. 5 4,000 21. GYS 74 : 2010 Specification for grades of fresh agricultural produce – Part 1: 8 4,000 CRS 24: Part 1: Bananas 2010/ 1st Revision 22. GYS 75: 1997 Specification for grades of cassava. 7 4,000 23. GYS 76: 2010 Specification for grades of fresh agricultural produce – 6 4,000 CRS 24: Part 9: 2010 Part 9: Sweet peppers 24. GYS 136:2010 Specification for grades of fresh agricultural produce – 9 4,400 CRS 24: Part 10: 2010 Part 10: Tomatoes
25. GYS 233: 2003 Specification for urea fertilizer grade. 21 6,100 26. GCP 21: 2005 Code of Practice for fresh fruits and vegetables. 21 6,100 27. GCP 25:2007 Code of Practice for packaging and transport of tropical 12 4,400 fresh fruits and vegetables. 28 GYS 517: 2017 Fertilizer – Making – Presentation and declarations 2 3,300 ISO 7409: 1984 CATEGORY - CHEMICAL STANDARDS (6) PAGE PRICE 1. GYS 9-13: 2003 Specification for labelling of commodities – Part 13: Labelling of 8 4,000 household chemicals. 2. GYS 9-14: 2003 Specification for labelling of commodities – Part 14: Labelling of 23 6,100 hazardous industrial chemicals. 3. GYS 85: 2003 Specification for classification of hazardous chemicals and 71 11,300 chemical products. 4. GYS 213: 2002 Specification for liquid household chlorine bleaches. 9 4,400 5. GYS 221: 2003 Glossary of terms relating to chemical and radiation hazards and 19 5,500 hazardous chemicals. 6. GYS 510: 2013 Specification for labelling of retail packages of aerosol insecticides. 9 4,400 CRS 37: 2011 CATEGORY – CONFORMITY ASSESSMENT STANDARDS (13)
1. GYS 170: 2009 General requirements for the operation of a laboratory. 30 6,600 (2nd Revision) 2. GYS 223: 2018 General requirements for the competence of testing and 28 6,600 ISO/IEC 17025: calibration laboratories. 2017/2nd Rev. 3. GYS 275: 2013 Conformity assessment – Requirements for the operation of 18 5,500 ISO/IEC 17020: various types of bodies performing inspection. 2012/1st Revision 4. GYS 276: 2013 Conformity assessment – Requirements for bodies certifying 27 6,600 ISO/IEC 7065: 2013 products, process and services. 5. GYS 454: 2009 Conformity assessment – Requirements for bodies providing 26 6,600 ISO/IEC 17021: audit and certification of management systems. 2006 6. GYS 457: 2009 Reference materials – Contents of certificates and labels. 7 4,000 ISO Guide 31: 2000 7. GYS 466: 2009 Conformity assessment – General requirements for 21 6,100 ISO 17011: 2005 accreditation bodies accrediting conformity assessment bodies. 8. GYS 467: 2009 Conformity assessment – Guidance for drafting normative 13 5,000 ISO 17007: 2009 documents suitable for use for conformity assessment. 9. GYS 472: 2009 Conformity assessment – Code of good practice. 5 4,000 ISO/IEC Guide 60: 2004 10. GYS 473: 2009 Arrangements for the recognition and acceptance of 8 4,000 ISO/IEC Guide 68: 2002 conformity assessment results. 11. GYS 474: 2009 Conformity assessment – Vocabulary and general principles. 47 9,000 ISO/IEC 17000: 2004 12. GYS 490: 2009 Conformity assessment – Fundamentals of product 9 4,400 ISO Guide 67: 2004 certification. 13. GYS 500: 2013 Conformity assessment – General requirements for proficiency 39 7,700 ISO/IEC 17043: 2010 testing.
CATEGORY - CONSTRUCTION STANSDARDS (19) PAGE PRICE 1. GYS 168: 1996 Bases for design of structures – Serviceability of buildings 32 7,200 ISO 10137: 1992 against vibration. 2. GYS 195: 2001 Specification for concrete sewer, storm drain and culvert pipe. 10 4,400 ASTM C 14-88 3. GYS 200: 2001 Specification for hollow clay blocks. 9 4,400 4. GYS 214: 2009 Specification for steel nails. 28 7,200 First revision 5. GYS 215: 2003 Specification for load bearing masonry concrete units. 16 5,000 Reapproved 2018 6. GYS 216: 2002 Specification for non-load bearing masonry concrete units. 5 4,000 Reapproved 7. GYS 227: 2003 Specification for ready mixed concrete. 11 4,400 8. GYS 269: 2010 Specification for galvanized steel barbed wire. 5 4,000 9. GYS 324: 2010 Specification for hot-dip coated corrugated steel sheets for 12 4,000 general purposes. 10. GYS 458: 2009 Specification for chain link fence fabric. 6 4,000 11. GCP 9-1:2005 Building Code – Part 1: Enforcement. 24 5,000 12. GCP 9-3: 2005 Building Code – Part 3: Fire, safety, use and occupancy. 17,400 First Revision 13. GCP 9-5: 1999 Building Code – Part 5: Plumbing. 82 12,100 14. GCP 9-7: 1999 Building Code – Part 7: Use of Guyanese hardwoods in 36 7,000 construction. 15. GCP 9-8: 1999 Building Code – Part 8: Concrete and block masonry. 41 7,700 16. GCP 9-9: 1999 Building Code – Part 9: Structural steel. 19 5,500 17. GCP 9-11: 2003 Building Code – Part 11: High rise buildings. 63 10,600 18. GCP 9-13: 2005 Building Code – Part 13: Foundations and excavations. 19 5,500
19. GYS 527:2018 Requirements for the design and construction of tanks and 26 6,600 secondary treatment and disposal septic associate systems CATEGORY – CONSUMER PRODUCTS STANDARDS (6) PAGE PRICE 1. GYS 28: 2006 Specification for safety matches. 14 5,000 CCS 0045: 1999 Revision, 2005 2. GYS 169: 1998 Specification for the content of warranties for goods. 7 4,000 3. GYS 171: 1998 Specification for toothbrushes. 11 4,400 4. GYS 212: 2009 Specification for net content in packages. 12 4,400 First Revision 5. GYS 230: 2003 Specification for the handling of consumer complaints. 14 6. GYS 557: 2020 Plastic bathtub and shower units. [email protected] IAPMO/ANSI Z 124.1.2: 2005 CATEGORY – CONTRACEPTIVE DEVICES STANDARDS (2) PAGE PRICE 1. GYS 40-1: 1996 Intra-uterine devices – Part 1: Determination of breaking force. 1 3,300 ISO 7857 - 1: 1983 2. GYS 40-3: 1996 Intra-uterine devices – Part 3: Packaging and labelling. 2 3,300 ISO 7857-3: 1983 CATEGORY - COOKING APPLIANCES (1) PAGE PRICE 1. GYS 193: 2017 Specification for domestic gas stoves for use with liquefied 36 7,700 First Revision petroleum gases.
CATEGORY - COSMETICS AND BABY PRODUCTS STANDARDS (12) PAGE PRICE 1. GYS 9 – 8: 1998 Specification for labelling of commodities – Part 8: 17 5,500 Labelling of cosmetics. 2. GYS 11 – 1: 1995 Specification for cosmetics – Part 1: General Requirements. 7 4,000 3. GYS 11 – 2 : 1997 Specification for cosmetics – Part 2: Water used in the 10 4,400 preparation of cosmetics. 4. GYS 11 – 3: 1997. Specification for cosmetics – Part 3: Raw materials and 22 6,100 adjuncts 5. GYS 11 – 4: 1997 Specification for cosmetics – Part 4: Microbiological test 41 8,300 methods. 6. GYS 11 – 5: 1997 Specification for cosmetics – Part 5: Skin lotions and creams. 9 4,000 7. GYS 11 – 6: 1997 Specification for cosmetics – Part 6: Specification for 15 5,000 shampoo. 8. GYS 11 – 7: 2002 Specification for cosmetics – Part 7: Methods of test for the efficacy 7 4,000 of antimicrobial preservatives in water-based cosmetics. 9. GYS 179 – 1: 1998 Baby skin care products – Part 1: General Requirements. 6 4,000 10. GYS 179 – 2 : 998 Baby skin care products – Part 2: Baby powder. 13 5,000 11. GYS 495: 2010 Specification for botanical cosmetics. 18 5,500 CRS 16: 2010 12. GCP 6 : 1997 Code of Practice for persons carrying out the business of 4 3,300 beautifying and improving the skin, hair or nails. CATEGORY - ELECTRICAL EQUIPMENT STANDARDS (211) PAGE PRICE 1. GYS 9 – 7: 2005 Specification for labelling of commodities – Part 7: 5 4,000 First revision Labelling of electrical equipment, fittings and household electrical appliances. 2. GYS 182 – 1: 1999 Specification for safety of household and similar electrical 76 12,100 appliances – Part 1: General requirements. 3. GYS 186: 1999 Electric fans. 18,700 UL 507: 1994 4. GYS 187: 1999 Motor – operated household food preparing machines. 110 15,200 UL 982: 1985 5. GYS 188: 1999 Household refrigerators and freezers. 102 14,100 UL 250: 1993 6. GYS 190 : 1999 Specification for electrical plugs and receptacles rated at 6,100 250 volts and less, 15 amperes and less. 7. GYS 196: 2001 Television receivers and high voltage video products. 128 16,300 UL 1410 : 1989 8. GYS 199 : 2001 Technical standards and requirements for television 44 8,300 BETS 4, Issue 1, broadcasting transmitters. November 01, 1996 9. GYS 201: 2001 Insulating tape. 12 4,400 ANSI/UL 510: 1986 10. GYS 202 : 2001 Specification for PVC – insulated cables for electricity 36 7,700 BS 6346: 1989 supply. 11. GYS 204: 2001 Fluorescent lighting fixtures. 76 12,100 ANSI/UL 1570: 1982 12. GYS 205: 2001 Certification of broadcasting equipment. 21 6,100 BESP 100, Issue 1, November 01, 1996 13. GYS 217: 2003 Fluorescent – Lamp ballasts. 66 10,600 ANSI/UL 935: 1992
14 GYS 218: 2003 Uninterruptable power supply equipment. 139 16,300 ANSI/UL 1778: 1991 15. GYS 232: 2017 Safety for seasonal and holiday decorative products. 202 20,000 UL 588: 2015/1st Rev 16. GYS 236: 2003 Specification for transmitters and receivers in VHF 23 6,100 maritime mobile service bands. 17. GYS 255: 2003 Specification for radio apparatus: VHF and UHF fixed 20 5,500 and land mobile service. 18. GYS 257: 2004 Specification for electrical appliance protectors. 4 3,300 19. GYS 270: 2006 Electric cables – PVC insulated, non-armoured cables 42 8,300 BS 6004: 2000 for voltages up to and including 450/750V, for electric power, lighting and internal wiring. 20. GYS CISPR 13: 2006 Sound and television broadcast receivers and associated 83 12,100 Edition 4.2 equipment – Radio disturbance characteristics – Limits and methods of measurement. 21. GYS CISPR 16-1-1: Specification for radio disturbance and immunity 139 16,300 2006/2nd Edition measuring apparatus and methods – Part 1: Radio disturbance and immunity measuring apparatus. 22. GYS CISPR 16-1-2: Specification for radio disturbance and immunity 141 16,300 2004/ Edition 1.1 measuring apparatus and methods – Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment – Conducted disturbances. 23. GYS CISPR 16-1-3: Specification for radio disturbance and immunity 63 10,600 2004/ 2nd Edition measuring apparatus and methods – Part 1-3: Radio disturbance and immunity measuring apparatus Ancillary equipment – Disturbance power. 24. GYS CISPR 16-1-4: Specification for radio disturbance and immunity 147 17,400 2004/A 2: 2005 measuring apparatus and methods – Part 1-4: Radio Edition 1.1 disturbance and immunity measuring apparatus – 11 4,400 Ancillary equipment – Radiated disturbances. 25. GYS CISPR 16-1-5: Specification for radio disturbance and immunity 103 14,100 2003 measuring apparatus and methods – Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz. 26. GYS CISPR 16-2-1: Specification for radio disturbance and immunity 137 16,300 2005 measuring apparatus and methods- Part 2-1: Methods of Edition 1.1 measurement of disturbances and immunity – Conducted disturbance measurements. 27. GYS CISPR 16-2-2: Specification for radio disturbance and immunity 89 13,100 2005 measuring apparatus and methods – Part 2-2: Methods Edition 1.2 of measurement of disturbances and immunity – Measurement of disturbance power. 28. GYS CISPR 16-2-3: Specification for radio disturbance and immunity 133 16,300; 2003/A 1 + A2: measuring apparatus and methods – Part 2-3: Methods of 5,500; 2003 measurement of disturbances and immunity – Radiated 17,11 4,400 disturbance measurements. 29. GYS CISPR 16-2-4: Specification for radio disturbance and immunity 49 9,000 2003 measuring apparatus and methods – Part 2-4: Methods of measurement of disturbances and immunity – Immunity measurements.
30. GYS CISPR 16-/TR: Specification for radio disturbance and immunity 192; 18,700 2003/A 1: 2005 measuring apparatus and methods – Part 3: CISPR 2nd Edition technical reports. 21 6,100
31. GYS CISPR 16-4-1/ Specification for radio disturbance and immunity 82 12,100 TR: 2004 measuring apparatus and methods – Part 4-1: Uncertainties, Edition 1.1 statistics and limit modeling – Uncertainties in standardised EMS tests. 32. GYS CISPR 16-4-2: Specification for radio disturbance and immunity 43 8,300 2003 measuring apparatus and methods – Part 4-2: Uncertainties, statistics and limit modeling – Uncertainty in EMS measurements. 33. GYS CISPR 16-4-3/ Specification for radio disturbance and immunity 31 7,200 TR:2 004 measuring apparatus and methods – Part 4-3: Uncertainties, statistics and limit modeling – Statistical considerations in the determination of EMC compliance of mass–produced products. 34. GYS CISPR 16-4-4/ Specification for radio disturbance and immunity 39 7,700 TR: 2003 measuring apparatus and methods – Part 4-4: Uncertainties, statistics and limit modeling – Statistics of complaints and a model for the calculation of limits. 35. GYS CISPR 20: 2005 Sound and television broadcast receivers and associated 171 18,700 Edition 5.2 equipment – Immunity characteristics Limits and methods of measurement. 36. GYS CEI/IEC 60050 International Electrotechnical Vocabulary – Chapter 723: 231 21,500 (723): 1997/A 1: 1999 Broadcasting: Sound, television, data. 78 12,100 37. GYS CEI/IEC 60065: Audio, video and similar electronic apparatus – Safety 339 25,400 2005/ Edition 7.1 requirements. 38. GYS CEI/IEC Power Transformers – Part 1: General. 89 13,100 60076-1: 2000/Edition 2.1 39. GYS CEI/IEC Power Transformers – Part 2: Temperature rise. 57 9,800 60076-2: 1993/2nd Edition 40. GYS CEI/IEC Power transformers – Part 3: Insulation levels, dielectric 107 15,200 60076-3: 2000 tests and external clearances in air. 41. GYS CEI/IEC Power Transformers – Part 4: Guide to the lightning 123 15,200 60076-4: 2002 impulse and switching impulse testing – Power transformers and reactors. 42. GYS CEI/IEC Power Transformers – Part 5: Ability to withstand short 71 11,300 60076-5: 2006 circuit. 3rd Edition 43. GYS CEI Power Transformers – Part 7: Loading guide for oil 113 15,200 IEC 60076-7: 2005 immersed power transformers. 44. GYS CEI/ Power Transformers – Part 8: Application guide. 167 18,700 IEC 60076-8: 1997 45. GYS CEI/IEC Power Transformers – Part 10: Determination of sound 69 11,300 60076-10: 2001 levels. 46. GYS CEI/IEC 60076- Power Transformers – Part 10-1: Determination of sound 95 14,100 10-1: 2005 levels – Application guide. 47. GYS CEI/IEC Power Transformers – Part 11: Dry – type transformers. 75 12,100 60076-11: 2004 48. GYS CEI/IEC Power Transformers – Part 13: Self - protected liquid filled 35 7,200 60076-13: 2006 transformers.
49. GYS CEI/IEC/TS Power Transformers – Part 14: Design and application of 75 12,100 60076-14: 2004 liquid – immersed power transformers using high – temperature insulation materials. 50. GYS CEI/IEC Magnetic tape sound recording and reproducing systems – 43 8,300 60094-1: 1981/+A1: Part 1: General conditions and requirements. 1994/ 4th Edition 51. GYS CEI/ Methods of measurement on receivers for television 51 9,000 IEC 60107-2:1997 broadcast transmissions – Part 2: Audio channels 2nd Edition General methods and methods for monophonic channels. 52. GYS CEI/IEC Recommended methods of measurement on receivers for 53 9,800 60107-3:1999 television broadcast transmissions – Part 3: Electrical Edition 1.1 measurements on multichannel sound television receivers using subcarrier systems. 53. GYS CEI/IEC Methods of measurement on receivers for television – 129 16,300 60107-7: 1997 Part 7: HDTV displays. 54. GYS CEI/IEC Recommended methods of measurement on receivers for 97 14,100 60107-8: 1997 television broadcast transmissions – Part 8: Measurements on D2-MAC/packet equipment. 55. GYS CEI/IEC Measurements of the electrical properties of electronic 19 6,100 60151-28:1 978 tubes – Part 28: Methods of measurement of colour- television picture tubes 56. GYS CEI/IEC High – voltage connecting wire with flame retarding 15 5,000 60197: 1965 insulation for use in television receivers. 57. GYS CEI Methods of measurement for radio transmitters – Part 5: 168 18,700 IEC 60244-5: 1992/ Performance characteristics of television transmitters. 2nd Edition 58. GYS CEI Methods of measurement for radio transmitters – 49 9,000 IEC 60244-8: 1993 Part 8: Performance characteristics of vestigial - sideband nd 2 Edition demodulators used for testing television transmitters and transposers. 59. GYS CEI Methods of measurement for radio transmitters – Part 10: 81 12,100 IEC 60244-10: 1986 Methods of measurement for television transmitters and transposers employing insertion test signals. 60. GYS CEI Connecting wires having a rated voltage of 20 kV and 11 5,500 IEC 60246: 1967 k V d.c. and maximum 25 working temperature of 105 0C for use in television receivers. 61. GYS CEI Polyvinyl chloride insulated cables of rated voltages up 15 5,000 IEC 60227-4: 1997 to and including 450/750V – Part 4: Sheathed cables for Edition 2.1 fixed wiring. 62. GYS CEI IEC 60309- Plugs, socket – outlets and couplers for industrial purposes 183 18,700 1: 2005/Edition 4.1 Part 1: General requirements.
63. GYS CEI Plugs, socket – outlets and couplers for industrial 101 14,100 IEC 60309-2: 2005 purposes - Part 2: Dimensional interchangeability Edition 4.1 requirements for pin and contact – tube accessories. 64. GYS IEC 60311: 2006 Electric irons for household or similar use – Method 49 9,000 Edition 4.1 for measuring performance. 65. GYS CEI Methods of measurement on radio receivers for various 86 13,100 IEC 60315-1: 1988 classes of emission – Part 1 : General considerations and 2nd Edition methods of measurement, including audio – frequency measurements
66. GYS CEI/IEC Household and similar electrical appliances – Safety – 281;43 22,800 60335-1: 2004/+ A 2: Part 1: General requirements. 2006/Edition 4.1 8,300 67. GYS CEI IEC 60335- Household and similar electrical appliances – Safety – 35 7,200 2-3: 2005/ Edition 5.1 Part 2-3: Particular requirements for electric irons. 68. GYS CEI Household and similar electrical appliances – Safety – 65 10,600 IEC 60335-2-9: 2006 Part 2-9: Particular requirements for grills, toasters Edition 5.1 and similar portable cooking appliances. 69. GYS CEI Household and similar electrical appliances – Safety 117 15,200 IEC 60335-2-69: Part 2-69: Particular requirements for wet and dry cleaners, 2005/ Edition 3.1 including power brush, for industrial and vacuum commercial use. 70. GYS CEI IEC 60335- Household and similar electrical appliances – Safety – 23 6,100 2-80: 2002 + A 1: 2004 Part 2-80: Particular requirements for fans. Edition 2.1 71. GYS CEI Household and similar electrical appliances – Safety – 33 7,200 IEC 60335-2-97: Part 2-97: Particular requirements for drives for rolling 2005/Edition 2.1 shutters, awnings, blinds and similar equipment. 72. GYS CEI IEC 60335- Household and similar electrical appliances – Safety – 29 6,600 2-102: 2004 Part 2-102: Particular requirements for gas, oil and solid fuel burning appliances having electrical connections. 73. GYS CEI IEC Household and similar electrical appliances – Safety – 49 9,000 60335-2-103: 2002 Part 2-103: Particular requirements for drives for gates, doors and windows. 74. GYS CEI IEC Household and similar electrical appliances – Safety – 87 13,100 60335-2-104: 2004 Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment. 75. GYS CEI IEC Household and similar electrical appliances – Safety – 31 7,200 60335-2-105: 2004 Part 2 -105: Particular requirements for multifunctional shower cabinets. 76. GYS CEI IEC Low – voltage electrical installations – Part 4-41: 65 10,600 60364-4-41: 2005 Protection against electric shock. 5th Edition 77. GYS CEI IEC Low voltage electrical installations – Part 7-753: 23 10,600 60364-7-753: 2005 Requirements for special installations or locations – Floor and ceiling heating systems. 78. GYS CEI IEC Time and control code for video tape recorders. 67 11,300 60461: 2001/3rd Edition 79. GYS CEI IEC Methods of measurements for radio equipment used in satellite 43 8,300 60510-3-4: 1992 earth stations – Part 3: Methods of measurement: Measurements for frequency division multicomplex (F.D.M) transmission. 80. GYS CEI IEC 60598- Luminaries – Part 1: General requirements and tests. 363 25,400 1: 2003/ 6th Edition 81. GYS CEI IEC Medical electrical equipment – Part 1: General 777 36,900 60601-1: 2005 requirements for basic requirements for basic safety 3rd Edition nd essential performance. 82. GYS CEI IEC Medical electrical equipment – Part 1-1: General 57 9,800 60601-1-1: 2000 requirements for safety – Collateral Standard: Safety 2nd Edition requirements for medical electrical systems. 83. GYS CEI IEC Medical electrical equipment – Part 1-2: General 219 20,000
60601-1-2: 2004 requirements for safety – Collateral Standard: Edition 2.1 Electromagnetic compatibility – Requirements. 84. GYS CEI IEC Medical electrical equipment – Part 1: General 99 14,100 60601-1-3: 1994 requirements for safety – Collateral Standard: General requirements for radiation protection in diagnostic X-ray equipment. 85. GYS CEI IEC Medical electrical equipment – Part 1-4: General 65 10,600 60601-1-4: 2000 requirements for safety – Collateral Standard: Programmable electrical medical systems. 86. GYS CEI IEC Medical electrical equipment – Part 1-6: General 147 17,400 60601-1-6: 2004 requirements for safety – Collateral Standard: Usability. 87. GYS CEI IEC Medical electrical equipment – Part 1-8: General 155 17,400 60601-1-8: 2003 requirements for safety – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems. 88. GYS IEC 60601-2- Medical electrical equipment – Part 2-51: Particular 175 18,700 51: 2003 requirements for safety, including essential performance, of recording and analyzing single channel and multichannel electrocardiographs. 89. GYS IEC 60704-2-13: Household and similar electrical appliances – Test code for the 29; 10 6,600 2000 + A 1: 2005 determination of airborne acoustical noise – Part 2-13: Particular requirements for range hoods. 4,400 90. GYS CEI IEC 60950- Information technology equipment – Safety – Part 1: 610 32,500 1: 2005/ 2nd Edition General requirements. 91. GYS IEC 60968: Self – ballasted lamps for general lighting services 31 7,200 1999/Edition 1.2 - Safety requirements. 92. GYS IEC 60969: Self – ballasted compact fluorescent lamps for general webstore.iec. 2016/ Edition 2.0 lighting services - Performance requirements. ch/csc 93. GYS IEC 61097- Global maritime distress and safety system (GMDSS) 43 8,300 6: 2005/ 2nd Edition Part 6: Narrowband direct – printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NA VTEX). 94. GYS IEC/ TR Digital data communications for measurement and control – 11 4,400 61158-1: 2003 Fieldbus for use in industrial control systems– Part 1: Overview and guidance for the IEC 61158 series. 95. GYS IEC 61158-2: Digital data communications for measurement and control – 326 25,400 2003/ 3rd Edition Fieldbus for use in industrial control systems – Part 2: Physical layer specification and service condition. 96. GYS IEC 61158-3: Digital data communications for measurement and control – 315 24,100 2003/3rd Edition Fieldbus for use in industrial control systems – Part 3: Data link service definition. 97. GYS IEC 61158-4: Digital data communications for measurement and control – 1,096 45,700 2003/3rd Edition Fieldbus for use in industrial control systems – Part 4: Data link protocol specification. 98. GYS IEC 61158-5: Digital data communications for measurement and control – 1,256 50,100 2003 Fieldbus for use in industrial control systems - Part 5: Application layer service definition. 99. GYS IEC 61158-6: Digital data communications for measurement and control – 1,304 50,100 2003/ 3rd Edition Fieldbus for use in industrial control systems – Part 6: Application layer protocol specification.
100. GYS CEI IEC 61225 Nuclear power plants – Instrumentation and control systems 63 10,600 :2005/2nd Edition important to safety – Requirements for electrical supplies. 101. GYS CEI IEC 61241 Electrical apparatus for use in the presence of combustible 99 14,100 -0: 2004 dust – Part 0: General requirements. 102. GYS CEI IEC 61241 Electrical apparatus for use in the presence of combustible 29 6,600 -1: 2004 dust – Part 1: Protection by enclosures “tD”. 103. GYS IEC 61241-2-1: Electrical apparatus for use in the presence of combustible 61 10,600 1994 dust – Part 2: Test methods – Section 1: Methods for determining the minimum ignition temperatures of dust. 104. GYS CEI IEC 61300- Fibre optic interconnecting devices and passive components 15 5,000 3-18: 2005/2nd Edition – Basic test and measurement procedures - Part 3-18: Examinations and measurement s – Keying accuracy of an angled end face connector. 105. GYS CEI IEC 61300- Fibre optic interconnecting devices and passive components – 63 10,600 3-29: 2005 Basic test and measurement procedures - Part 3-29: Examinations and measurements – Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components. 106. GYS CEI IEC 61308: High-frequency dielectric heating installations - Test 29 6,600 2005/2nd Edition methods for the determination of power output. 107. GYS CEI IEC 61326- Electrical equipment for measurement, control and laboratory use 37 7,700 1: 2005 – EMC requirements – Part 1: General requirements. 108. GYS CEI IEC 61326- Electrical equipment for measurement, control and laboratory use 15 5,000 2-1: 2005 – EMC requirements – Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications. 109. GYS CEI IEC 61326- Electrical equipment for measurement, control and laboratory use 19 11,300 2-2: 2005 –EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems. 110. GYS CEI IEC Electrical equipment for measurement, control and laboratory use 19 11,300 61326-2-6: 2005 – EMC requirements – Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment. 111. GYS CEI Lamp control gear – Part 2-2: Particular requirements for 67 11,301 IEC 61347-2-2: 2006/ d.c. or a.c. supplied electronic step – down converters for 3 3,3000 A 2: 2006/Edition 1.1 filament lamps. 112. GYS IEC 61400- Wind turbines – Part 1: Design requirements. 85 13,100 1: 2005/3rd Edition 113. GYS CEI IEC 61400- Wind turbines – Part 2: Design requirements for small wind 179 18,700 2: 2006/2nd Edition turbines. 114. GYS IEC 61400-11: Wind turbine generator systems – Part 11: Acoustic noise 43;5 8,300 2002+ A 1: 2006 measurement techniques. 4,000 2nd Edition 115. GYS IEC 61400-12-1: Wind turbines – Part 12-1: Power performance 90 13,100 2005 measurements of electricity producing wind turbines. 116. GYS IEC/TS 61400- Wind turbine generator systems – Part 13: Measurement of 69 11,300 13: 2001 mechanical loads. 117. GYS IEC/TS 61400- Wind turbines – Part 14: Declaration of apparent sound 11 4,400 14: 2005 power level and tonality values. 118. GYS CEI IEC Wind turbine generator systems – Part 21: Measurement and 85 13,100 61400-21: 2001 assessment of power quality characteristics of grid
connected wind turbines. 119. GYS IEC/TS 61400- Wind turbine generator systems – Part 23: Full -scale 63 10,600 23: 2001 structural testing of rotor blades. 120. GYS IEC/TR 61400- Wind turbine generator systems – Part 24: Lightning 69 11,300 24: 2002 protection. 121. GYS CEI IEC/TR Functional safety of electrical/electronic/ programmable 33 7,200 61508-0: 2005 electronic safety – related systems - Part 0: Functional safety and IEC 61508. 122. GYS CEI IEC 61508 Functional safety of electrical/electronic/ programmable 115 15,200 -1: 1988 electronic safety – related systems - Part 1: General requirements. 123. GYS CEI IEC 61508- Functional safety of electrical/electronic/ programmable 143 16,300 2: 2000 electronic safety– related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety – related systems. 124. GYS CEI IEC 61508 Functional safety of electrical/electronic/programmable 95 14,100 -3: 1998 electronic safety-related systems – Part 3: Software requirements. 125. GYS CEI IEC 61508 Functional safety of electrical/electronic/programmable 53 9,000 -4: 1998 electronic safety – related systems – part 4: Definitions and abbreviations. 126. GYS CEI IEC 61508 Functional safety of electrical/electronic/programmable 57 9,800 -5: 1998 electronic safety – related systems – Part 5: Examples of methods for the determination of safety integrity levels. 127. GYS CEI IEC 61508 Functional safety of electrical/electronic/programmable 145 17,400 -6: 2000 electronic safety – related systems – Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3. 128. GYS IEC 61508-7: Functional safety of electrical/electronic/programmable 229 21,500 2000 electronic safety – related systems – Part 7: Overview of techniques and measures. 129. GYS CEI IEC 61511 Functional safety – Safety instrumented systems for the process 177 18,700 -1: 2003 industry sector – Part 1: Framework, definitions, system, hardware and software requirements. 130. GYS CEI IEC 61511 Functional safety – Safety instrumented systems for the 159 17,400 -2: 2004 process industry sector – Part 2: Guidelines for the application of IEC 61511-1. 131. GYS CEI IEC 61511- Functional safety – Safety instrumented systems for the process 113 15,200 3: 2004 industry process industry sector – Part 3: Guidelines for the determination of the required safety integrity levels. 132. GYS IEC 61606-4: Audio and audiovisual equipment – Digital audio parts - Basic 31 7,200 2005 measurement methods of audio characteristics – Part 4: Personal computer. 133. GYS CEI IEC 61755- Fibre optic connector optical interfaces – Part 1: Optical 27 6,600 1: 2005 interfaces for single mode non-dispersion shifted fibres – General and guidance. 134. GYS CEI IEC 61754- Fibre optic connector interfaces – Part 6: Type MU 113 15,200 6: 2005/Edition 1.2 connector family. 135. GYS IEC/TR 61850- Communication networks and systems in substations – Part 37 7,700 1: 2003 1: Introduction and overview. 136. GYS IEC/TS 61850- Communication networks and systems in substations – Part 42 8,300 2: 2003 2: Glossary. 137. GYS CEI IEC 61850- Communication networks and systems in substations – 33 7,200 3: 2002 Part 3: General requirements.
138. GYS CEI IEC 61850- Communication networks and systems in substations – 59 9,800 4: 2002 Part 4: System and project management. 139. GYS IEC 61850-5: Communication networks and systems in substations – 131 16,300 2003 Part 5: Communication requirements for functions and device models. 140. GYS IEC 61850-6: Communication networks and systems in substations – Part 6: 144 17,400 2004 Configuration description language for communication in electrical substations related to IEDs. 141. GYS IEC 61850-7-1: Communication networks and systems in substations – Part 7-1: 109 15,200 2003 Basic communication structure for substation and feeder equipment – Principles and models. 142. GYS IEC 61850-7-2: Communication networks and systems in substations – Part 7-2: 169 18,700 2003 Basic communication structure for substation and feeder equipment – Abstract communication service interface (ACSI). 143. GYS IEC 61850-7-3: Communication networks and systems in substations – 64 10,600 2003 Part 7-3: Basic communication structure for substation and feeder equipment – Common data classes. 144. GYS IEC 61850-7-4: Communication networks and systems in substations – Part 7-4: 104 15,200 2003 Basic communication structure for substation and feeder equipment – Compatible logical node classes and data classes. 145. GYS IEC 61850-8-1: Communication networks and systems in substations – 133 16,300 2004 Part 8-1: Specific Communication Service Mapping (SCSM) – Mappings to MMS (ISO 9506 and ISO 9506-2) and to ISO/IEC 8802-3. 146. GYS IEC 61850-9-1: Communication networks and systems in substations – 29 6,600 2003 Part 9-1: Specific Communication Service Mapping (SCSM) – Sampled values over serial unidirectional multidrop point to point link. 147. GYS IEC 61850-9-2: Communication networks and systems in substations – Part 9-1: 28 6,600 2004 Specific Communication Service Mapping (SCSM) – Sampled values over ISO/IEC 8802-3. 148. GYS IEC 61850- Communication networks and systems in substations – 43 8,300 10:2005 Part 10: Conformance testing. 149. GYS CEI IEC 61870- Energy management system application program interface 81 12,100 1: 2005 (EMS-API) – Part 1: Guidelines and general requirements. 150. GYS CEI IEC 62115: Electric toys – Safety. 75 12,100 2004/Edition 1.1 151. GYS CEI IEC/TR Live working – Guidelines for the installation and 89 13,100 62263: 2005 maintenance of optical fibre cables on overhead power lines. 152. GYS IEC/PAS 62267: Railway applications – Automated Urban Guided Transport 33 7,200 2005 (AUGT) safety requirements. 153. GYSCEI IEC 62271- High-voltage switchgear and control gear – Part 2: Seismic 45 14,100 2: 2003 qualification for rated voltages of 72, 5kV and above. 154. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 100: High- 579 32,500 100: 2003/Edition 1.1 voltage alternating – current circuit – breakers. 155. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 101: 281 22,800 101: 2006 Synthetic testing. 156. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 110: 187 18,700 102: 2001 Inductive load switching. 157. GYS CEI IEC High-voltage switchgear and control gear – Part 105: 95 14,100 62271-105: 2002 Alternating current switch – fuse combinations. 158. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 107: 89 13,100
107: 2005 Alternating current fused circuit – switchers for rated voltages above 1 k V up to and including 52 kV. 159. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 108: High- 47 9,000 108: 2005 voltage alternating current disconnecting circuit – breakers for rated voltages of 72, 5 k V and above. 160. GYS IEC/PAS 62271- High-voltage switchgear and controlgear – Part 109: 92 13,100 109: 2002/Edition 1.0 Alternating – current series capacitor by – pass switches. 161. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 110: 53 9,800 110:2005 Overheard, pad – mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 Kv. 162. GYS IEC 62271- High-voltage switchgear and control gear – Part 71 11,300 111: 2005 111: Overhead, pad – mounted, dry vault, and submersible IEEE C37.60 automatic circuit reclosers and fault interrupters for alternating current systems up to 38 Kv. 163. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 169 18,700 200: 2003 200: AC metal-enclosed switchgear and control gear for rated voltages above 1 kV and up to and including 52 Kv. 164. GYS IEC 62271- High –voltage switchgear and control gear – Part 203: Gas – 137 16,300 203: 2003 insulated metal – enclosed switchgear for rated voltages above 52 Kv. 165. GYS CEI IEC/TR High-voltage switchgear and control gear – Part 301 : 9 4,400 62271-301: 2004 Dimensional standardisation of terminals. 166. GYS CEI IEC/TR High-voltage switchgear and control gear – Part 308: Guide 89 13,100 62271-308: 2002 for asymmetrical short –circuit breaking test duty T 100a. 167. GYS CEI IEC/TR High-voltage switchgear and control gear – Part 310: 55 9,800 62271-310: 2004 Electrical endurance testing for circuit – breakers of rated voltage 72, 5 kv and above. 168. GYS CEI IEC/TR General testing procedures for medical electrical equipment. 319 24,100 62354: 2005 169. GYS IEC 62612: Self-ballasted LED lamps for general lighting services with webstore.iec. 2013 supply voltages 250V – Performance requirements. ch/csc 170. GYS IEC 62552-1: Household refrigerating appliances – Characteristics and test 2015 methods – Part 1: General requirements. 171. GYS IEC 62552-2: Household refrigerating appliances – Characteristics and test 2015 methods – Part 2: Performance requirements. 172. GYS IEC 62552-3: Household refrigerating appliances – Characteristics and test 2015 methods – Part 3: Energy consumption and volume. 173. GYS IEC 62612: 2013 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements 174. GYS 518: 2017 Safety for Lampholders 109 15,200 UL 496: 2017 175. GYS 519: 2018 Safety for armored cable 26 6,600 UL 4: 2018 176. GUYS 520: 2018 Safety for Panelboards 179 18.700 UL 67: 2017 177. GYS 521: 2018 Safe for knife switches 31 7,200 UL 363: 2017 178. GYS 522: 2018 Safe for Conduit, tubing and cable fittings. 146 17,400 UL 514B: 2014
179. GYS 524: 2018 Safe for Surge protective devices. 211 20,000 UL 1447: 2017 180. GYS 525: 2018 Safe for Molded-case circuit breakers, molded-case switches 301 24,100 UL 489: 2016 and circuit-breaker enclosures. 181. GYS 526: 2018 Safe for Molded-case circuit breakers, molded-case switches, 18 5,000 UL 489B: 2016 and circuit-breaker enclosures for use with photovoltaic. 182. GYS 528: 2018 Safety for grounding and bonding equipment. 41 8,300 UL 467: 2017 183. GYS 529: 2018 Safety for cord sets and power-supply cords. 191 18,700 UL 817: 2017 184. GYS 530: 2018 Safety for medium-voltage power cables. 122 15,200 UL 1072: 2018 185. GYS 531: 2018 Safety for thermoset-insulated wires and cables. 114 15,200 UL 44: 2018 186. GYS 532: 2018 Safety for thermoplastic-insulated wires and cables. 80 12,100 UL 83: 2017 187. GYS 533: 2018 Safety for attachment plugs and receptacles. 336 25,400 UL 498: 2018 188. GYS 534: 2018 Safety for reference standard for electrical wires, cables and 149 17,400 UL 1581: 2017 flexible cords. 189. GYS 535: 2018 Safety for Receptacles closures. 13 5,500 UL 2255: 2016 190. GYS 536: 2018 Safety for Dry-Type general purpose and power 56 9,800 UL 1561: 2015 transformers. 191. GYS 537: 2018 Safety for Plugs, receptacles, and cable connectors of the pin 106 15,200 UL 1682: 2017 and sleeve type. 192. GYS 538: 2018 Safety for low-voltage, AC and DC power, circuit breakers 102 14,100 UL 1066: 2017 used in enclosures. 193. GYS 539: 2018 Safety for low-voltage landscape lighting systems. 90 13,100 UL 1838: 2017 194. GYS 540: 2018 Safety for low-voltage lighting systems. 74 11,300 UL 2108: 2017 195. GYS 542: 2019 Safety for electrical rigid metal conduit – Steel. 38 7,700 UL 6: 2007 196. GYS 543: 2019 Safety for metallic outlet boxes. 90 13,100 UL 541A: 2013 197. GYS 544: 2019 Safety for non-metallic outlet boxes, flush-device boxes, and 100 1,100 UL 514C: 2018 covers. 198. GYS 546: 2019 Safety for Receptacles and switches intended for use with 14 5,000 UL 1567: 2016 aluminum wire. 199. GYS 547: 2019 Safety for Flexible lighting products. 39 7,700 UL 2388: 2017 200. GYS 548: 2019 Safety for Lighting emitting diode (LED) equipment for use 128 16,300 UL 8750: 2018 in lighting products. 201. GYS 549: 2019 Safety for Wire and cable test methods. 237 21,500 UL 2556: 2015 202. GYS 550: 2019 Safety for Nonindustrial photoelectric switches for lighting 86 13,100 UL 773A: 2016 control. 203. GYS 551: 2019 Safety for Power outlets. 89 13,100 UL 231: 2016 204. GYS 552: 2019 Safety for Flat - Plate Photovoltaic Modules and Panels. 125 16,300
UL 1703: 2018 205. GYS 553: 2019 Safety for Plate Photovoltaic (PV) Module Safety 68 11,300 UL 61730-1: 2017 Qualification - Part 1: Requirements for Construction. 206. GYS 554: 2019 Safety for Plate Photovoltaic (PV) Module Safety 71 11,300 UL 61730-2: 2017 Qualification - Part 2: Requirements for Testing. 207. GYS 558: 2019 Safety for Inverters, converts, controllers and inter- 230 21,500 UL 1741: 2018 connection system equipment for use with distributed energy resources. 208. GYS 559: 2019 Safety for Photovoltaic wire. 11 4,400 UL 4703: 2017 209. GYS 560: 2019 Safety for Arc-Fault circuit-interrupters. 86 13,100 UL 1699: 2017 210. GYS 561: 2019 Safety for Connectors for use in photovoltaic systems. 24 6,100 UL 6703: 2017 211. GYS 562: 2019 Safety for Fuseholders – Part19: Photovoltaic fuseholders. 4 3,300 UL 4248-19: 2015 CATEGORY – ENERGY MANAGEMENT STANDARDS (6) PAGE PRICE IEC Webstore 1. GYS 503: 2019 Energy management systems - Requirements 22 6,100 ISO 50001: 2018/FR with guidance for use. 2. IEC 62612: 2013 Self-Ballasted led Lamps for General Lighting webstore.iec.ch/csc Services with supply voltages 50v – Performance Requirements. 3. IEC 60969: 2016 Self-Ballasted Compact Fluorescent Lamp for webstore.iec.ch/csc General Lighting Services – Performance Requirements. 4. IEC 62552-1: 2015 Household Refrigeration Appliances webstore.iec.ch/csc Characteristics and Test Methods – Part 1 – General Requirements 5. IEC 62552-2: 2015 Household Refrigerating Appliances – webstore.iec.ch/csc Characteristics and Test Methods – Part 2 – Performance Requirements. 6. IEC 62552-3: 2015 Household Refrigeration Appliances – webstore.iec.ch/csc Characteristics and Test Methods Part 3 – Energy Consumption and Volume CATEGORY – ENVIRONMENTAL STANDARDS (31) PAGE PRICE
1. GYS 9 – 10: 2014 Specification for labelling of commodities – Part 10: 10 4,400 First Revision Labelling of equipment, items and parts containing refrigerants. 2. GYS 89: 2015 Environmental management systems – Requirements with 35 7,200 ISO 14001: 2015/2nd Rev guidance for use. 3. GYS 167-3: 1996 Acoustics – Statistical methods for determining and verifying 2 3,300 ISO 7574-3: 1985 stated noise emission values of machinery and equipment – Part 3: Simple (transition) method for stated values for batches of machines. 4. GYS 167 – 4: 1996 Acoustics- Statistical methods for determining and verifying 14 5,000 ISO 7574 – 4: 1985 stated noise emission values of machinery and equipment – Part 4: Methods for stated values for batches of machines. 5. GYS 207: 2002 Interim guidelines for industrial effluent discharge into the 17 5,500 environment.
6. GYS 229-3: 2003 Methods of sampling and testing for water and wastewater- 17 5,500 Part 3: Biochemical oxygen demand- Five days (BOD5). 7. GYS 229-4: 2003 Methods of sampling and testing for water and wastewater: 13 5,000 Part 4 - Chemical oxygen demand. 8. GYS 229-5: 2003 Methods of sampling and testing for water and wastewater: 8 4,000 Part 5 -Solids. 9. GYS 229-6: 2005 Methods of sampling and testing for water and wastewater: 11 4,400 Part 6 – Dissolved oxygen. 10. GYS 229-7: 2003 Methods of sampling and testing for water and wastewater: 10 4,400 Part 7 - Nitrogen (Ammonium). 11. GYS 229-9: 2003 Methods of sampling and testing for water and wastewater: 9 4,400 Part 9 – Phosphorus. 12. GYS 229-12: 2005 Methods of sampling and testing for water and wastewater: 11 4,400 Part 12 - Chloride. 13. GYS 229-13: 2003 Methods of sampling and testing for water and wastewater: 10 4,400 Part 13- Surfactants. 14. GYS 229-14: 2004 Methods of sampling and testing for water and wastewater: 9 4,400 Part 14 Phenols. 15. GYS 229-15: 2003 Methods of sampling and testing for water and wastewater: 13 5,000 Part 15- Coliform. 16. GYS 229-16: 2004 Methods of sampling and testing for water and wastewater: 11 4,400 Part 16 - Oil and grease. 17. GYS 229-18 : 2003 Methods of sampling and testing for water and wastewater: 5 4,000 Part 18 -Lead. 18. GYS 229-21-:2004 Methods of sampling and testing for water and wastewater: 9 4,400 Part 21 – Copper. 19. GYS 229-22 : 2005 Methods of sampling and testing for water and wastewater: 5 4,000 Part 22 - Zinc. 20. GYS 229-23: 2005 Methods of sampling and testing for water and wastewater: 5 4,000 Part 23: Nickel 21. GYS 229-24: 2004 Methods of sampling and testing for water and wastewater: 9 4,400 Part 24: Iron 22. GYS 248: 2003 Environmental labels and declarations - Self-declared 23 6,100 ISO 14021: 1999 environmental claims (Type 11 environmental labelling). 23. GYS 249: 2003 Environmental labels and declarations - Type 1 11 4,400 ISO 14024: 1999 environmental labelling - Principles and procedures. 24. GYS 250: 2003 Environmental management - Environmental performance 32 7,200 ISO 14031: 1999 evaluation - Guidelines. 25. GYS 263: 2010 Guidelines for noise emission into the environment. 5 4,000 26. GYS 280: 2006 Environmental management – Examples of environmental 93 13,100 ISO/TR 14032: 1999 performance evaluation (EPE). 27. GYS 455: 2009 Environmental management systems – General guidelines on 39 7,700 ISO 14004: 2004 principles, systems and support techniques. 28. GYS 456: 2009 Environmental management – Environmental assessment of 19 5,500 ISO 14015: 2001 sites and organizations. 29. GYS 476: 2009 Greenhouse gases – Pt. 1: Specification with guidance at the 20 5,500 ISO 14064-1: 2006 organization level for quantification and reporting of greenhouse gas emissions and removals. 30. GYS 477: 2009 Greenhouse gases – Pt. 2: Specification with guidance at the 28 6,600 ISO 14064-2: 2006 project level for quantification, monitoring and reporting of greenhouse gas emissions reduction or removal
enhancements. 31. GYS 478: 2009 Greenhouse gases – Pt. 3: Specification with guidance for the 34 7,200 ISO 14064-3: 2006 validation and verification of greenhouse gas assertions. FERTILIZER STANDADS (2) PAGE PRICE
1. GYS 233: 2003 Specification for urea fertilizer grade. 21 6,100
2. GYS 517: 2017 Fertilizers – Marking – Presentation and 2 3,300 ISO 7409: 1984 declarations. FINANCE STANDARDS (1) PAGE PRICE 1. GYS 501: 2013 Brand valuation – Requirements for monetary brand valuation. 11 4,400 CATEGORY – FOOD STANDARDS (52) PAGE PRICE
1. GYS 9 -9: 2013 Specification for labelling of pre-packaged foods. 28 6,600 CRS 5: 2010/2nd Rev 2. GYS 9-11: 2002 Specification for labelling of commodities – Part 11: Labelling 6 4,000 of brewery products (beer, stout, shandy and malta). 3. GYS 9-19: 2018 Specification for labelling of commodities - Part 19: Labelling 2 3,300 of biodegradable food containers. 4. GYS 10: 2007/ 1st Rev Specification for salt. 11 4,400 5. GYS 12: 2013 Specification for packaged water. 14 5,000 CRS 1: 2010/1st Rev 6. GYS 14: 1996 Specification for white sugar. 4 3,300 7. GYS 15: 1995 Specification for powdered (icing) sugar. 4 3,300 8. GYS 16: 1995 Specification for sugar for canning. 4 3,300 9. GYS 17: 2004/1st Rev. Specification for brown sugar. 4 3,300 10. GYS 18: 1995 Specification for sampling and methods of analysis of sugar. 34 7,200 11. GYS 19: 2003/1st Rev Specification for vinegar. 6 4,000 12. GYS 29: 1995 Specification for curry powder. 5 4,000 13. GYS 33: 2003/1st Rev Specification for wheat flour. 67 11,300 14 GYS 34: 2003/1st Rev. Specification for biscuits. 15 5,000 15. GYS 35 : 1996 Specification for shortening. 7 4,000 16. GYS 36: 1996 Specification for margarine and cooking margarine. 8 4,000 17. GYS 37: 2006 Specification for rum. 18 5,500 CCS 0025 : 1992 18. GYS 38: 2001/1st Rev Specification for jams, (fruit preserves) and jellies. 25 6,100 19. GYS 53: 2016 Specification for salted fish and dried salted fish. 25 6,100 20. GYS 54: 1996 Specification for coconut oil. 7 4,000 21. GYS 192: 2000 Specification for bread and rolls. 39 7,700 22. GYS 209: 2010 Prerequisite programmes on food safety – Part 1: Food 19 5,500 ISO 22002-1: 2009 manufacturing. 23. GYS 211: 2014 Rice – Specification. 20 5,500 CRS 44: 2013/1st Rev 24. GYS 211: 2017 Rice - Specification 19 5,500 ISO 7301: 2011 25. GYS 219 : 2003 Specification for ice-cream and related products. 24 6,100 26. GYS 246: 2010 Specification for cassava bread. 11 4,400 CRS 19: 2010 27. GYS 258: 2006 Specification for brewery products. 12 4,400
CRS 0047: 2003 (Revised 2004) 28. GYS 261: 2006 Specification for carbonated beverages. 37 7,700 CCS 0050: 2004 29. GYS 262: 2004 Specification for drinking water. 10 4,400 30. GYS 266: 2006 Requirements for the labelling of brewery products (Beer, 5 4,000 CCS 0044: 1998 stout, shandy, malta). Revised 2003 31. GYS 267:2007 Specification for nutrition labelling. 29 6,600 32. GYS 459: 2009 Specification for Milk 28 6,600 33. GYS 460: 2016 Specification for honey. 9 4,400 34. GYS 461: 2018 Food safety management systems – Requirements for any 32 7,200 ISO 22000: 2005 organization in the food chain. 35. GYS 462: 2009 Food safety management systems –Requirements for ISO 16 5,000 22003:2007 bodies providing audit and certification of food safety management systems. 36. GYS 463: 2009 Food safety management systems – Guidance on the 13 5,000 application of ISO 22004: 2005. 37. GYS 464: 2009 Traceability in the feed and food chain – General principles 8 4,000 and basic requirements for system design and implementation. 38. GYS 492: 2016 Specification for achar, amchar and kuchela. 13 5,000 39. GYS 494: 2010 Specification for fruit and vegetable juices and drinks, and 23 6,100 CRS 27: 2010 fruit nectars. 40. GYS 506: 2013 Specification for spices and sauces. 26 6,600 CRS 35: 2010 41. GYS 508: 2010 Specification for packaged natural coconut water 5 4,000 CRS 3: 2010 42. GYS 516: 2017 Requirements for water re-filling premises. 7 4,000 43. GYS 545: 2019 Processed foods Pasta products – Specification. 11 4,400 CRS 32: 2018 44. GCP 10: 2003 Code of practice for the production of rice 18 5,500 45. GCP 20 : 2004 Code of Practice for street vended foods. 13 5,000 46. GCP 22 : 2005 Code of Practice for the production, processing, labelling and 51 9,000 marketing of organically produced foods. 47. GCP 23 : 2005 Code of Practice for the cultivation of paddy. 20 5,500 48. GCP 24: 2006 Code of hygienic practice for the collecting, processing and 17 5,500 CCS 0048: 2003 marketing packaged water (Mineral water, spring water, purified water). 49. GCP 29: 2013 Code of Practice for package water. 15 5,000 CRCP 1: 2010 50. GCP 30: 2013 Code of Practice for packaged natural coconut water. 9 4,400 CRCP: 2010 51. GCP 32: 2009 Code of Practice for General Principles of food hygiene. 19 5,500 CRCP 5: 2010 52. GCP 33: 2009 Code of hygienic practice for Milk and milk products. 28 6,600 53. GCP 34: 2010 Code of Practice for preparation of frozen fruit pulp and 19 5,500 CRCP 6: 2010 purées. FOOTWEAR STANDARDS (14) PAGE PRICE 1. GYS 9-4: 2003 Specification for labelling of commodities – Part 4: Labelling 5 4,000 First Revision of footwear. 2. GYS 30: 2016 Specification for footwear 12 4,400
3. GYS 479: 2009 Footwear –Test methods for uppers – Resistance to damage 5 4,000 ISO 17693: 2004 on lasting. 4. GYS 480: 2009 Footwear –Test methods for uppers and lining – Flex 6 4,000 ISO 17694: 2003 resistance. 5. GYS 481: 2009 Footwear – Test methods for uppers, linings and socks – Tear 6 4,000 ISO 17696: 2004 strength. 6. GYS 482: 2009 Footwear – Test methods for outsoles – Flex resistance. 8 4,000 ISO 17707: 2005 7. GYS 483: 2009 Footwear – Sampling location, preparation and duration of 10 4,400 ISO 17709: 2004 conditioning of sample and test pieces. 8. GYS 484: 2009 Footwear – Test methods for stiffeners and toepuffs – 5 4,000 ISO 20863: 2004 Bondability. 9. GYS 485: 2009 Footwear – Test methods for uppers – Water resistance. 8 4,000 ISO 17702: 2003 10. GYS 486: 2009 Footwear – Test methods for whole shoe – Upper sole 9 4,400 ISO 177708:2003 adhesion. 11. GYS 487: 2009 Footwear – Test methods for heels and toe pieces – Top piece 6 4,000 ISO 19958: 2004 retention strength. 12. GYS 488: 2009 Footwear – Test methods for outsoles – Adhesion resistance. 9 4,400 ISO 20871: 2001 13. GYS 489: 2009 Footwear – Test methods for stiffeners and toepuffs – 16 5,000 ISO 20864: 2004 Mechanical characteristics. 14. GCP 5 : 1997 Code of Practice for footwear: Purchasing, care and handling 7 4,000 of complaints. CATEGORY – GOVERNANCE AND ETHICS STANDARDS (1) PAGE PRICE 1. GYS 502: 2013 Guidance on social responsibility. 106 15,200 ISO 26000: 2010 CATEGORY - INFORMATION TECHNOLOGY STANDARDS (20) PAGE PRICE 1. GYS 299: 2006 Information technology – Fibre Distributed Data interface 98 14,100 ISO/IEC 9314-8: 1998 (FDDI) – Part 8: Media Access Control -2 (MAC-2). 2. GYS 300: 2006 Information technology – Small Computer System 439 27,600 ISO/IEC 9316: Interface – 2. 1995/2nd Edition 3. GYS 301: 2006 Information technology – Small Computer System 119 15,200 ISO/IEC 9316-2: Interface 2(SCSI- 2) – Part 2: Common Access Method 2000 (CAM) transport and SCSI interface module. 4. GYS302: 2006+ Information technology – Digital compression and 182 18,700 ISO/IEC 10918- coding of continuous – tone still images: Requirements 1: 1994 and guidelines. GYS 303: 2006 Information technology – Home Electronic System (HES) 32 7,200 5. ISO/IEC 10192-1: 2002 interfaces – Part 1: Universal Interface (UI) Class 1. 6. GYS 304: 2006 Information technology – Home Electronic System (HES) 17 5,500 ISO/IEC/TR– interfaces Part 2: Sample Interface Type 1. 10192 - 2: 2000 7. GYS 305: 2006 Information technology – Coding of moving pictures and 150 17,400 ISO/IEC 11172-3: 1993 associated audio for digital storage media at up to and about 1,5 Mbit/s – Part 3 : Audio. 8. GYS 306: 2006 Information technology – Generic cabling for customer 136 16,300 ISO/IEC 11801: premises. 2000/ 2nd Edition
9. GYS 307: 2006 Information technology – Software life cycle processes. 57;53 9,800 ISO/IEC 12207: 1995 9,800 A 1: 2002 10. GYS 308: 2006 Information technology – Telecommunications and 128 16,300 ISO/IEC 13239: information Exchange between systems - High - level data 2002 link and control (HDLC) procedures. 11. GYS 309: 2006 Information technology – Generic coding of moving pictures 115 15,200 ISO/IEC 13818-3: and associated audio information – Part 3: Audio. 1998/ 2nd Edition 12. GYS 310: 2006 Information technology – Coding of audio - visual objects – 335 24,400 ISO/IEC 14496-0: Part 10: Advanced video coding. 2005/2nd Edition 13. GYS 311: 2006 Information technology – Coding of audio – visual objects – 513 29,700 ISO/IEC 14496- Part 11: Scene description and application engine. 11: 2005 14. GYS 312: 2006 Information technology – Configuration of customer 16 5,000 ISO/IEC 14709- premises cabling (CPC) for applications – Part 1: Integrated 9 4,400 1: 1997+ A 1: 2004 Services Digital Network (ISDN) basic access. 15. GYS 313: 2006 Information technology – CDIF semantic metamodel – Part 113 15,200 ISO/IEC 15476- 4: Data models. 4: 2005 16. GYS 314: 2006 Information technology – Pathways and spaces for customer 26;24 6,600 ISO/IEC 18010: premises cabling. 6,100 2002 +A 1: 2005 17. GYS 315: 2006 Information technology – Security techniques – IT network 6,100 ISO/IEC 18028- security – Part 3: Securing communications between 3: 2005 networks using security gateways. 18. GYS 316: 2006 Information technology – Service management – Part 1: 16 5,000 ISO/IEC 20000- Specification. 1: 2005 19. GYS 317: 2006 Information technology – Service management – Part 2: 34 7,200 ISO/IEC Code of Practice. 20000-2: 2005 20. GYS 318: 2006 Information technology – Office equipment – Copying 26 6,600 ISO/IEC machines and multi-function devices – Information to be 21117: 2005 included in specification sheets and related forms. CATEGORY – JEWELLERY STANDARDS (1) PAGE PRICE
1. GYS 50: 2010 Specification for gold articles. 16 5,000 CRS 17: 2010/2nd Rev.) CATEGORY – LABELLING STANDARDS (22) PAGE PRICE 1. GYS 9 –1: 2017 Labelling of Goods - Part 1: General requirements. 4 3,300 CRS 55-1: 2016/1st Rev 2. GYS 9 –2: 2017 Labelling of Goods – Part 2: Specific requirements for pre- 8 4,000 CRS 55-2: 2016/1st Rev packaged goods. 3. GYS 9-3: 2004 Specification for labelling of commodities – Part 3: 5 4,000 (First Revision) Labelling of retail packages of cigarettes. 4. GYS 9 – 3: 2009 Specification for the labelling of retail packages of tobacco 23 6,100 Second Revision products. 5. GYS 9-3: 2014 Labelling of tobacco products. 34 7,200 CRS 26: 2013
Third Revision (511)
6. GYS 9- 4: 2003 Specification for labelling of commodities – Part 4: 5 4,000 (First revision) Labelling of footwear.
7. GYS 9-5: 2002(1st Rev.) Specification for labelling of commodities - Part 5: Labelling of furniture. 2 3,300 8. GYS 9-6: 2003 Specification for labelling of commodities - Part 6: 3 3,300 (First revision) Labelling of animal feeds. 9. GYS 9 – 7: 2005 Specification for labelling of commodities – Part 7: 5 4,000 First Rev/Amd. 1, 2019 Labelling of electrical equipment, fittings and household electrical appliances. 10. GYS 9 – 8: 1998 Specification for labelling of commodities – Part 8: 17 5,500 Labelling of cosmetics. 11. GYS 9 -9: 2013 Specification for labelling of pre-packaged foods. 28 6,600 CRS 5: 2010/(2nd Rev) 12. GYS 9 – 10: 2002 Specification for labelling of commodities – Part 10: 10 4,400 Labelling of equipment, items and parts containing refrigerants. 13. GYS 9-11: 2002 Specification for labelling of commodities – Part 11: 6 4,000 Labelling of brewery products (beer, stout, shandy and malta). 14. GYS 9 –12: 2002 Specification for labelling of commodities – Part 12: 5 4,000 Labelling of toys and playthings. 15. GYS 9-13: 2003 Specification for labelling of commodities – Part 13: 8 4,000 Labelling of household chemicals. 16. GYS 9-14: 2003 Specification for labelling of commodities – Part 14: 23 6,100 Labelling of hazardous industrial chemicals. 17. GYS 9-15: 2003 Specification for labelling of commodities- Part 15: 3 3,300 Labelling of garments. 18. GYS 9-16: 2003 Specification for labelling of commodities- Part 16: 6 4,000 Labelling of textiles. 19. GYS 9 -17: 2004 Specification for labelling of commodities – Part 17: 6 4,000 Labelling of protective helmets for road users. 20. GYS 9-18:2005 Specification for labelling of commodities - Part 18: 6 4,000 Labelling of seeds. 21. GYS 9-19: 2018 Specification for labelling of commodities - Part 19: 2 3,300 Labelling of biodegradable food containers. 22. GYS 541: 2018 Specification for the labelling, packaging and testing of toys 5 4,000 and playthings. CATEGORY – LABORATORY STANDARDS (6) PAGE PRICE
1. GYS 235: 2003 General requirements for safety in laboratories. 49 9,000 2. GYS 265: 2013 Medical laboratories – Particular requirements for quality and 50 9,000 ISO 15189: 2012/1st competence. Rev 3. GYS 268: 2007 Requirement for point-of-care testing (POCT) sites. 41 8,300 4. GYS 470: 2009 Point of Care Testing (POCT) Requirements for quality and 11 4,400 ISO 22870: 2006 competence. 5. GYS 475: 2009 Medical Laboratories – Requirements for safety. 39 7,700 ISO 15190: 2003 6. GCP 8: 1999 Code of safety for chemical laboratories. 17 5,500
CATEGORY –MANAGEMENT SYSTEMS STANDARDS (19) PAGE PRICE 1. GYS 42-3: 1996 Quality management and quality assurance standards - Part 3: 13 5,000 ISO 9000-3: 1997 Guidelines for the application of ISO 9001: 1994 to the development, supply, installation and maintenance of computer software. 2. GYS 181: 1999 A definition of year 2000 conformity requirements. 13 5,000 GYS 183: 1999 Sampling procedures for inspection by attributes- Part 1: 67 11,300 3. ISO 2859-1:1989 Sampling schemes indexed by acceptable quality level (AQL) for lot-by-lot inspection. GYS 231: 2010 4. Requirements for good management practices for micro, 14 5,000 CRS 14: 2010/1st Rev small and medium enterprises. GYS 237: 2016 Quality management systems – Fundamentals and vocabulary. 51 9,000 5. st ISO 9000: 2015/1 Rev GYS 238: 2015 Quality management systems - Requirements. 29 6,600 6. nd ISO 9001: 2015/2 Rev GYS 239: 2003 Quality management systems - Guidelines for performance 56 9,800 7. ISO 9004: 2000 improvements.
8. GYS 244: 2003 Guidelines for quality management system documentation. 14 5,000 ISO/TR 10013:2001
9. GYS 254: 2018 Guidelines for auditing management systems. 44 8,300 ISO 19011: 2018/SR
10. GYS 271: 2006 Information and documentation – Records management Part 19 5,500 ISO 15489-1: 2001 1: General. GYS 272: 2006 11. Information and documentation – Records management Part 39 7,700 ISO/TR 15489-2:2001 2: Guidelines.
12 GYS 281: 2006 Quality management – Customer satisfaction Guidelines for complaints23 6,100 ISO 10002: 2004 handling in organisations. 13. GYS 468: 2009 Guidelines for the Selection of Quality Management 13 5,000 ISO 10019: 2005 System consultants and use of their services. 14. GYS 469: 2009 Quality Management – Customer satisfaction – Guidelines for 34 7,200 ISO 10003: 2007 dispute resolution external to organization.
15. GYS 471: 2009 Quality Management – Customer Satisfaction - 18 5,500 ISO 10001: 2007 Guidelines for Codes of Conduct for organization. 16. GYS 497: 2003 Quality management – Guidelines for training. 14 5,000 ISO 10015: 1999 17. GYS 504: 2013 Quality Management – Guidance on people involvement and 23 6,100 ISO 10018: 2012 competence. 18. GYS 505: 2013 Guidance on project management. 36 7,700 ISO 21500: 20123 19. GCP 16 : 2003 Code of Practice for product recall procedures. 8 4,000 CATEGORY - MECHANICAL ENGINEERING STANDARDS (43) PRICE PRICE 1. GYS 82: 1998 Specification for automobile exhaust emissions. 4 3,300 2. GYS 113 : 1996 Mechanical vibration and shock – Vibration of buildings – 18 5,500 ISO 4866 : 1990 Guidelines for the measurement of vibrations and evaluation of their effects on buildings. 3. GYS 115: 1996 Non-destructive testing – Penetrant inspection - General 9 4,400 ISO 3452 : 1984 principles. 4. GYS 116 : 1996 Non-destructive testing – Liquid penetrant inspection - Means 3 3,300 ISO 3453: 1984 of verification. 5. GYS 117: 1996 Non-destructive testing – Industrial radiographic illuminators 3 ISO 5580: 1985 – Minimum requirements.
6. GYS 119 : 1996 Non-destructive testing – Penetrant flaw detectors - General 4 3,300 ISO 9935: 1992 technical requirements. 7. GYS 120-1: 1996 Plain bearings – Metallic multilayer plain bearings - Part 1: 10 4,400 ISO 4386-1: 1 992 Non-destructive ultrasonic testing of bond. 8. GYS 120-2: 1996 Plain-bearings –Metallic multilayer plain bearings - Part 2 : 4 3,300 ISO 4386-2 : 1982 Destructive testing of bond for bearing metal layer thickness greater than or equal to 2mm. 9. GYS 120-3: 1996 Plain bearings – Metallic multilayer plain bearings - Part 3: 10 4,400 ISO 4386-3 : 1992 Non-destructive penetrant testing. 10. GYS 122: 1996 Seamless and welded (except submerged arc-welded) steel 4 3,300 ISO 9303 : 1989 tubes for pressure purposes – Full peripheral ultrasonic testing for the detection of longitudinal imperfections. 11. GYS 123: 1996 Seamless and welded (except submerged arc-welded) steel 7 4,000 ISO 9304 : 1989 tubes for pressure purposes – Eddy current testing for the detection of imperfections. 12. GYS 124: 1996 Seamless steel tubes for pressure purposes - Full peripheral 4 3,300 ISO 9305: 1989 ultrasonic testing for the detection of transverse imperfections. 13. GYS 125 : 1996 Electric resistance and induction welded steel tubes for 3 3,300 ISO 9764 : 1989 pressure purposes – Ultrasonic testing of the weld seam for the detection of longitudinal imperfections. 14. GYS 126 : 1996 Submerged arc-welded steel tubes for pressure purposes – 4 3,300 ISO 9765 : 1990 Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections. 15. GYS 127 : 1996 Seamless and welded (except submerged arc- welded) steel 4 3,300 ISO 10332 : 1994 tubes for pressure purposes – Ultrasonic testing for verification of hydraulic leak tightness. 16. GYS 128: 1996 Seamless and hot stretch reduced welded steel tubes for pressure 3 3,300 ISO 10543: 1993 purposes – Full peripheral ultrasonic thickness testing. 17. GYS 129 : 1996 Steel tubes for pressure purposes – Qualification and 12 5,000 ISO 11484: 1994 certification of non-destructive testing (NDT) personnel. 18. GYS 130: 1996 Seamless and welded steel tubes for pressure purposes – Ultrasonic 3 3,300 ISO 11496: 1993 testing of tube ends for the detection of laminar imperfections. 19. GYS 134: 1996 Welds – Working positions – Definitions of angles of slope 8 4,000 ISO 6947: 1990 and rotation. 20. GYS 137: 1996 Welding – Materials for resistance welding electrodes and 9 4,400 ISO 5182: 1991 ancillary equipment. 21. GYS 139: 1996 Tungsten electrodes for inert gas shielded arc and for plasma 4 3,300 ISO 6848: 1984 welding, cutting and welding – Codification. 22. GYS 142: 1996 Equipment used in gas welding, cutting and allied processes – Safety 8 4,000 ISO 5175: 1987 devices for fuel gases and oxygen or compressed air– General specifications, requirements and tests. 23. GYS 144: 1996 Spot welding equipment – Taper plug gauges and taper ring gauges. 4 3,300 ISO 5822: 1998 24. GYS 145: 1996 Resistance spot welding – Electrode adaptors, female taper 1: 2 3,300 ISO 5829: 1984 10. 25. GYS 146: 1996 Graphical symbols for resistance welding equipment. 8 4,00 ISO 7286: 1986 26. GYS 148: 1996 Insulation caps and bushes for resistance welding equipment. 2 3,300 ISO 7931: 1985 27. GYS 149: 1996 Gas tightness of equipment for gas welding and allied 4 3,300 ISO 9090: 1989 processes.
28. GYS 152: 1996 Arc-welded joints in steel – Guidance on quality levels for 9 4,400 ISO 5817: 1992 imperfections. 29. GYS 156: 1996 Fill metal for soft soldering, brazing and braze welding – 2 3,300 ISO 3677: 1992 Designation. 30. GYS 157: 1996 Steel castings – Magnetic particle inspection. 20 5,500 ISO 4986: 1992 31. GYS 158: 1996 Steel castings – Penetrant inspection. 11 4,400 ISO 4987: 1992 32. GYS 159: 1996 Steel castings – Radiographic inspection. 2 3,300 ISO 4993: 1987 33. GYS 161: 1996 Railway rolling stock material – Ultrasonic acceptance testing. 7 4,000 ISO 5948: 1994 34. GYS 162: 1996 Aluminum alloy castings – Radiography testing. 15 5,500 ISO 9915: 1992 35. GYS 163: 1996 Aluminum alloy and magnesium alloy castings - Liquid 13 5,000 ISO 9916: 1991 penetrant. 36. GYS 164: 1996 Aluminum alloy castings – Visual method for Assessing the 3 3,300 ISO 10049: 1992 porosity. 37. GYS 166: 1996 Chain slings assembled by methods other than Welding - 15 5,000 (ISO 7593: 1986) Grade T (8). 38. GYS 191 – 9: 1999 Slings. 9 4,000 ANSI/ASME B30.9b - 1987 39. GYS 191 – 10: 1999 Hooks. 11 5,000 ANSI/ASME B 30 - 1990 40. GYS 191 – 17: Overhead and gantry cranes (Top running bridge, single girder, 14 5,000 1999/ANSI/ASME underhung hoist). B 30.17d - 1990 41. GYS 206: 2001 Seat belt assemblies. 24 6,100 JIS D 4604: 1979 42. GYS 228-5: 2003 Crane code – Part 5: Mobile and locomotive cranes. 109 9,000 ASME/ANSI B 30.5:1989 43. GYS 274: 2006 Guidelines for interpretation of ISO series for application 16 5,000 ISO/TR 13352: 1997 within iron ore industry. MISCELLANEOUS STANDARDS (1) PAGE PRICE 1. GYS 256: 2004 Guide for drafting and presentation of Guyana standards. 61 10,600 CATEGORY – OPTICS & OPTICAL INSTRUMENTS (1) PRICE PRICE 1. GYS 111: 1996 Optics and optical instruments – Ophthalmology - Graduated 1 3,300 ISO 8429:1 986 dial scale
CATEGORY – PAINTS AND SURFACE COATINGS STANDARDS (7) PAGE PRICE 1. GYS 55: 1996 Methods of test for paints and surface coatings. 27 6,600 2. GYS 56: 1996 Specification for the limit on lead content in paints. 18 5,500 3. GYS 176: 1998 Specification for paint - Interior and exterior, emulsion type, 5 4,000 flat. 4. GYS 177: 1998 Specification for paint - Emulsion type, interior and 5 4,000 exterior, low sheen and semi-gloss. 5. GYS 178: 1998 Specification for paint - Interior and exterior, oil modified 4 4,000
alkyd. 6. GYS 225: 2003 Specification for lacquer. 17 5,500 7. GYS 226 : 2003 Methods of sampling and test for thinners and solvents for 27 6,600 paints. CATEGORY – PAPER BOARD & PULPS STANDARDS (1) PAGE PRICE 1. GYS 189: 2010 Specification for toilet tissue. 15 5,000 CATEGORY - PETROLEUM STANDARDS (8) PAGES PRICE 1. GYS 175: 1998 Specification for compressed oxygen gas for industrial use only. 5 4,000 2. GYS 197: 2001 Specification for unleaded gasoline (Petrol) for motor 14 5,000 vehicles. 3. GYS 264: 2005 Specification for the storage, handling and transportation 7 4,000 of LPG cylinders. 4. GYS 453: 2008 Specification for the storage, handling and transport of 7 4,000 steel compressed gas cylinders. 5. GYS 512: 2016 Requirements for the transportation of petroleum and 7 4,000 petroleum products by road tanker wagons. 6. GYS 513: 2016 Requirements for the transportation of petroleum and 12 4,400 petroleum products by bulk transportation carriers. 7. GYS 523: 2018 Specification for low pressure regulators for the use with 26 6,100 liquefied petroleum gas (LPG). 8. APEA/IP: 1999 Guidance for the design, construction, modification and 242 21,500 maintenance of petrol filling stations. CATEGORY – PLASTIC & PLASTIC PRODUCTS STANDARDS (19) PAGE PRICE 1. GYS 91: 1998 Specification for rigid poly (vinyl chloride) for (PVC) compounds 4 3,300 ASTM D1784-81 and chlorinated poly (vinyl chloride) (CPVC) compounds. 2. GYS 92: 2010 Specification for joints for drain and sewer plastic pipes 3 3,300 ASTM 3212 –07 using flexible elastomeric seals. 3. GYS 94 :2010 Test method for obtaining hydrostatic design basis for 16 4,400 ASTM D 2837 -08 thermoplastic pipe materials or pressure design basis for (First revision) thermoplastic pipe products. 4. GYS 95: 2010 Test method for time-to-failure of plastic pipe under 4 4,000 ASTM D 1598-02 Constant internal pressure. 1st Rev 5. GYS 96: 2010 Test method for resistance to short – time hydraulic pressure of 3 4,000 ASTM D 1599- 99 plastic pipe, tubing and fittings. (First revision) 6. GYS 97: 2010 Specification for joints for IPS PVC pipe using solvent 4 4,000 ASTM D 2672-96 cement. (1 st Rev.) 7. GYS 98: 2010 Terminology relating to plastic piping systems. 15 4,000 ASTM F 412-07/1st Rev 8. GYS 99: 2010 Specification for Poly (vinyl chloride) (PVC) Plastic pipe, 11 4,400 ASTM D 1785-06 schedules 40, 80 and 120. (2nd Rev) 9. GYS 100: 2010 Specification for chlorinated poly (vinyl chloride) (CPVC) 6 4,000 (ASTM D 441/441 plastic pipe, schedules 40 and 80. /M -02) 10. GYS 101: 1998 Specification for joints for plastic pressure using flexible 3 4,000 ASTM D 3139 -98 elastomeric seals. 11. GYS 102: 2010 Standard practice for estimating the quality of extruded poly 7 4,000 ASTM F 1057 –87 (vinyl chloride) (PVC) pipe by the heat reversion
(1st Rev) technique. 12. GYS 103: 2010 Test method for adequacy of fusion of extruded poly 3 4,000 ASTM D 2152 – (vinyl chloride) (PVC) pipe and molded fittings by acetone 95(First revision) immersion. 13. GYS 104: 2010 Test method for determining dimensions of thermoplastic 5 4,000 ASTM D 2122–98 pipe and fittings. (1st Rev) 14. GYS 105: 2010 Test method for impact resistance of thermoplastic pipe and 8 4,000 ASTM D 2444-99 fittings by means of a tup (falling weight). (First revision) 15. GYS 106: 1998 Abbreviations of terms relating to plastics. 3 4,000 ASTM D 1600-86a 16. GYS 107: Specification for poly (vinyl chloride) (PVC) pressure- rated 8 4,400 2010/ASTM D 2241 pipe (SDR series). – 05/2nd Rev 17. GYS 185: 2010 Specification for chlorinated poly (vinyl chloride) (CPVC) 7 4,000 ASTM F 442/ plastic pipe (SDR – PR). F442-99/1st Rev 18. GYS 465: 2010 Specification for Polypropylene pipes. 37 7,700 19. GYS 491: 2010 Specification for polyethylene garbage bags – High density. 14 5,000 CRS 33: 2010 CATEGORY - POULTRY STANDARDS (7) PAGE PRICE 1. GYS 9-6: 2003 Specification for labelling of commodities - Part 6: 3,3003 (First revision) Labelling of animal feeds. 3
2. GYS 58: 2006 Specification for poultry feed and feed ingredients. 42 6,100 Second revision 3. GYS 210: 2017 Specification for poultry and poultry products. 20 7,500 CRS 28: 2012 First Revision 4. GYS 260: 2004 Specification for an abattoir. 17 5,500 5. GYS 273: 2006 Grading requirements for table eggs. 22 6,100 CCS 0052: 2005 6. GCP 13: 2005 Code of Practice for poultry processing. 16 5,000 (First revision) 7. GCP 27: 2008 Code of Practice for the operation of poultry hatcheries. 18 5,500 CATEGORY – PRODUCT CERTIFICATION SCHEME STANDARDS (3) PRICE PRICE 1. GYS 50: 2010 Specification for gold articles. 16 5,000 CRS 17: 2010 (2ND Revision) 2. GYS 99: 2010 Specification for Poly (vinyl chloride) (PVC) Plastic pipe, 11 4,400 ASTM D 1785-06 schedules 40, 80 and 120. (2nd Rev.) 3. GYS 107: 2010 Specification for poly (vinyl chloride) (PVC) pressure- rated 8 4,400 ASTM D 2241 – pipe (SDR series). 05/2ND Revision CATEGORY – SAFETY STANDARDS (9) PAGE PRICE 1. GYS 9 -17: 2004 Specification for labelling of commodities – Part 17: Labelling of 6 4,000 protective helmets for road users.
2. GYS 57: 1997 Fire protection – Safety signs. 8 4,000 ISO 6309:1987 3. GYS 203: 2001 Code of safety for mercury. 6 4,000 4. GYS 208: 2002 Specification for accident prevention tags. 16 5,000 5. GYS 220: 2003 Specification for ergonomic principles in the design of work systems. 22 6,100
6. GYS 222: 2003 Safety conditions in industry. 31 6,600 7. GYS 234: 2 003 Specification for safety of toys and playthings. 30 7,200 8. GYS 259: 2018 Occupational Health and Safety Management Systems – 56 8,300 ISO 45001: 2018/FR Requirements with guidance for use. 9. GCP 19: 2004 Code of Practice on Occupational, Safety and Health Audit. 35 7,200 PAGE PRICE CATEGORY – SOAP, DETERGENTS AND CLEANING AGENTS STANDARDS (4) 1. GYS 21: 1995 Specification for toilet soap. 5 4,000 2. GYS 22: 1995 Specification for hard laundry soap. 4 3,300 3. GYS 23: 2005 Specification for synthetic laundry detergent powder. 15 4,000 4. GYS 172: 1998 Specification for paper products for personal cleansing. 22 6,100
CATEGORY – SPORTS STANDARDS (2) PAGE Cost ($)
1. GCP 35: 2016 Code of Practice for paintball player safety briefing. ASTM F 2801-11(2015) 3 3,300 2. GCP 36: 2016 Code of Practice for paintball field operation. 4 3,300 ASTM F 1777-12 CATEGORY - TEXTILE AND GARMENTS STANDARDS (10) PAGE PRIC E 1. GYS 9-15: 2003 Specification for labelling of commodities- Part 15: Labelling of 3 3,300 garments. 2. GYS 9-16: 2003 Specification for labelling of commodities- Part 16: Labelling of 6 4,000 textiles. 3. GYS 77: 1997 Specification for the care labelling of textiles. 15 5,000 4. GYS 78: 1997 Specification for the method of determining the maximum Safe 3 3,300 ironing temperature of fabrics. 5. GYS 79: 1997 Specification for sizing of ladies clothing. 5 4,000 6. GYS 80: 1997 Specification for sizing of gent’s clothing. 5 4,000 7. GYS 81: 1997 Specification for sizing of children’s clothing. 7 4,000 8. GYS 173:1998 Glossary of terms relating to textiles and clothing. 25 6,100 9. GYS 174: 1998 Methods of test for the determination of dimensional change in 11 4,400 washing and drying of textiles. 10. GYS 515: 2016 Specification for textile and related products. 6 4,000 CATEGORY – TOBACCO PRODUCTS STANDARDS (3) PAGE Cost ($) 1. GYS 9-3: 2004 Specification for labelling of commodities – Part 3: Labelling of 5 4,000 (First Revision) retail packages of cigarettes. 2. GYS 9 – 3: 2009 Specification for the labelling of retail packages of tobacco 23 6,100 Second Revision products. 3. GYS 511: 2013 Labelling of tobacco products 31 7,200 CRS 26: 2013
3rd Revision of 9-3 CATEGORY - TOURISM STANDARDS (4) PAGE PRICE 1. GCP 15: 2003 Code of Practice for assessment, licensing, registration, 40 7,700 classification and grading of the accommodation sector. 2. GCP 17: 2003 Code of Practice for quality management in the restaurant service. 34 7,200 3. GCP 18: 2003 Code of Practice for tour operators and tour guides. 16 5,000 4. GYS 514: 2016 Requirements for bed and breakfast facilities. 6 4,000 CATEGORY – TRADE STANDARDS(32) PAGE PRICE
1. GYS 9-1: 1994 Specification for labelling of commodities – Part 1: General 3 3,300 Principles. 2. GYS 9-2: 1994 Specification for labelling of commodities – Part 2: Labelling of 11 4,400 prepackages goods. 3. GYS 9-9: 2013 Specification for labelling of pre-packaged foods. 28 6,600 CRS 5: 2010 4. GYS 9-11: 2002 Specification for labelling of commodities – Part 11: Labelling of 6 4,000 brewery products (beer, stout, shandy and malta). 5. GYS 12: 2013 Specification for packaged water. 14 5,000 CRS 1: 2010/1st Rev 6. GYS 15: 1995 Specification for powdered (icing) sugar. 4 3,300
7. GYS 17: 2004 Specification for brown sugar. 4 3,300 (First revision) 8. GYS 19: 2003 Specification for vinegar. (First revision) 6 4,000 9. GYS 29: 1995 Specification for curry powder. 5 4,000 10. GYS 33: 2003 Specification for wheat flour. 9 4,400 (First revision) 11. GYS 34: 2003 Specification for biscuits. 15 5,000 (First revision) 12. GYS 35 : 1996 Specification for shortening. 7 4,000 13. GYS 36: 1996 Specification for margarine and cooking margarine. 8 4,000 14. GYS 37: 2006 Specification for rum. 20 5,500 CCS 0025 : 1992 15. GYS 38: 2001 Specification for jams ( fruits preserves) and jellies 25 6,100 First Revision 16. GYS 53: 2016 Specification for salted fish and dried salted fish. 23 6,100 17. GYS 54: 1996 Specification for coconut oil. 7 4,000 18. GYS 189: 2010 Specification for toilet tissue. 15 5,000
19. GYS 192: 2000 Specification for bread and rolls. 39 7,700 20. GYS 211: 2014 Rice – Specification. 20 5,500 CRS 44: 2013 (First revision) 21. GYS 219 : 2003 Specification for ice-cream and related products. 24 6,100 22. GYS 258: 2006 Specification for brewery products. 12 4,400 CRS 0047: 2003
(Revised 2004)
23. GYS 261: 2006 Specification for carbonated beverages. 38 7,700 CCS 0050: 2004 24. GYS 262: 2004 Specification for drinking water. 10 4,400 25. GYS 269: 2010 Specification for galvanized steel barbed wire. 5 4,000 26. GYS 324: 2010 Specification for hot-dip coated corrugated steel sheets for 12 4,400 general purposes. 27. GYS 460: 2016 Specification for honey. 9 4,400 28. GYS 492: 2016 Specification for achar, amchar and kuchela. 13 5,000 29. GYS 494: 2010 Specification for fruit and vegetable juices and drinks, and fruit 23 6,100 CRS 27: 2010 nectars. 30. GYS 508: 2010 Specification for packaged natural coconut water 5 4,000 CRS 3: 2010 31. GCP 29: 2013 Code of Practice for package water. 15 5,000 CRCP 1: 2010 32. GCP 31: 2010 Code of practice for the manufacture of wooden craft items. 9 4,400 CRCP 7: 2010 CATEGORY – TYRE STANDARDS (5) PAGE PRICE 1. GYS 66: 1997 Definitions of terms used in the pneumatic tyre industry. 12 4,400 2. GYS 67: 2017 Requirements for pneumatic passenger car tyres. 14 5,000 2nd Revision 3. GYS 194: Specification for new pneumatic tyres for commercial highway 23 6,100 2001/1st Rev vehicles. 4. GCP 4: 1999 Code of Practice for the storage of tyres, inner tubes and flaps. 4 3,300 5. GCP 11: 1999 Code of Practice for vehicle tyre and tube repairs. 5 4,000 CATEGORY – WEIGHTS AND MEASURES STANDARDS (3) PAGE Cost ($) Specification for liquid commercial capacity measures 1. GYS 32 : 996 7 4,000 (metric).
2. GYS 52: 1996 Metric practice guide conversion factors and procedures. 50 9,000 7 4,000 3. GYS 180: 2001 (First Specification for equal arm scale (4 kg). revision) 4 Metric & imperial conversion factors: for easy calculation and 19 500 application. CATEGORY – WOOD STANDARDS (7) PAGE Cost ($) Specification for labelling of commodities - Part 5 : 2 3,300 1. GYS 9-5: 2002 (First revision) Labelling of furniture.
2. GYS 496: 2010 Requirement for the Guyana Legality assurance system 16 5,000 3. GYS 499: 2013 Specification for wooden furniture. 20 5,500 CRS 20: 2010 4. GCP 1: 2003 Code of Practice for the grading of hardwoods. 65 10,600
5. GCP 12: 2002 Code of Practice for the seasoning of hardwood lumber. 21 6,100 (First revision)
6. GCP 31: 2010 Code of practice for the manufacture of wooden craft items. 9 4,400 CRCP 7: 2010 7. GYS 509: 2013 Specification for indigenous furniture (bamboo, rattan, wicker 10 4,400 CRS 21: 2010 and nibbi).