62 X 66 Glad Tidings Quilt by Maywood Studio

Glad Tidings Quilt by Maywood Studio featuring the Glad Tidings Collection from Maywood Studio

62 x 66

#madewithmaywood maywoodstudio.com Fabric 1 Fabric 3 Fabric 4 Fabric 5 M9824-G Fabric 2 M9827-G M9823-G M9822-SW M9821-G

Fabric 6 Fabric 7 Fabric 8 Fabric 9 Fabric 10 M9826-G M9827-R M9826-J M9823-E M9826-R

Fabric 11 Fabric 12 Fabric 13 MASBLM M9820-J 9825-G Binding

WOF - Width of Fabric LOF - Length of Fabric RST - Right Sides Together HST - Half Square Triangle

Maywood Studio makes every effort to make sure our patterns are accurate. Please visit maywoodstudio.comand check for project updates. Black Version Finished Size: 62" x 66" Fabric Requirements Cutting Fabric 1 9824-G 1/4 yard Fabric 2 9821-G 1/4 yard Fabrics 1, 2, 3, and 5 From each fabric cut Fabric 3 9827-G 1/4 yard A (2) 3-1/2" x WOF Strip. Fabric 4 9823-G 3/8 yard Subcut (4) 3-1/2" x 12" rectangles. B (4) 2" x 4-1/2" rectangles Fabric 5 9822-SW 1/4 yard C (3) 3-1/2" Squares Fabric 6 9826-G 5/8 yard Fabric 4 Fabric 7 M9827-R 1/2 yard A Cut (3) 3-1/2" x WOF Strip. Fabric 8 M9826-J 1-1/8 yards Subcut (8) 3-1/2" x 12" rectangles. Fabric 9 M9823-E 1/4 yard B Cut (4) 2" x 4-1/2" rectangles C Cut (3) 3-1/2" squares Fabric 10 M9826-R 1/4 yard Fabric 11 MASBLM 1/3 yard Fabrics 6 D Cut (3) 3-1/2" x WOF Strip. Fabric 12 M9820-J 1-1/4 yards Subcut (20) 3-1/2" x 4-1/2" rectangles. Fabric 13 9825-G (binding) 5/8 yard E Cut (2) 3-1/2" x WOF Strips. Backing your choice 4 yards Subcut (10) 3-1/2" x 6-1/2" rectangles. F Cut (10) 3-1/2" squares

Fabric 7 D H B D B H G Cut (4) 3-1/2" x WOF Strips K K Subcut (20) 3-1/2" x 6-1/2" rectangles

M M Fabric 8 Cut (5) 3-1/2" x WOF strips. G A G A H Subcut (48) 3-1/2" squares . I Subcut (5) 3-1/2" squares I F F I Cut (9) 2" x WOF strips. C O N C J Subcut (24) 2" x 3-1/2" rectangles N O N O K Subcut (20) 2" x 4-1/2" rectangles L E L C N O C L Subcut (20) 2" x 6-1/2" rectangles H C O N C H O N O N M Subcut (40) 2" x 2" squares J M N O M J F F Fabric 9 N Cut (2) 3-1/2" x WOF Strips Ribbon Units Wreath Block Subcut (20) 3-1/2" squares 6-1/2" x 13-1/2" 12-1/2" x 13-1/2" 10 Total 10 Total Fabric 10 O Cut (2) 3-1/2" x WOF Strips Subcut (20) 3-1/2" squares H H Fabric 11 Inner Border Cut (6) 1-1/2" x WOF strips.

Fabric 12 Outer Border A A Fabric 4 Cut (6) 6-1/2" x WOF strips. Wreath Sides 3-1/2" x 13-1/2" Fabric 13 Binding Cut (7) 2-1/2" x WOF strips 2 of each

H H

J J

Glad Tidings Quilt © Maywood Studio all rights reserved 3 Glad Tidings Quilt – by Maywood Studio Please read all instructions before you begin. Seam allowance is 1/4" unless otherwise stated. Use a light sizing/starch on the squares before cutting triangles to help control stretching along the bias edges.

1. Star Unit - Half Square Triangles Fig. 1 - Cut a Fabric 8-I square twice on the diagonal.

- Cut a Fabric 4-C square twice on the diagonal. I/C Sew together. Make 4. (Fig.1) make 4 - Repeat with the remaining I/C squares for a total of 4 HSTs. Press.

2. Sew the remaining HST units as pictured to the right: N/C O/C O/F N/F N/O make make make make make 3. Lay the HSTs in 4 rows to form the star unit. 4 4 4 4 8 Include (2) Fabric 8-M squares as pictured. ((Fig 2) Sew together in rows and then sew row to row. Make 2.

Make 2 6-1/2" x 6-1/2" Fig. 2

4. Mark a diagonal line from corner to corner on a Fabric 8-M square. Place right sides together over a Fabric 4-B Fig. 3 rectangle. Sew on the marked line. Trim 1/4" away from B your stitched line. Repeat making a mirror-image unit. Press. Make 2 sets. Fig. 3 M

5. Sew the step 4 rectangles to either side of a Fabric 6-D Make 2 sets rectangle. Press. Make 2.

6. Center Wreath Unit Sew the step 5 unit to a Fabric 7-G rectangle. D Then sew that to the Star Unit. Press. Make 2. (Fig 4)

Make 2 6-1/2" x 13-1/2"

Glad Tidings Quilt © Maywood Studio all rights reserved 4 7. Repeat steps 1- 6 to make the following Center Wreath Units. For each unit you will replace the Fabric 4-C squares and the Fabric 4-B rectangles with the fabric indicated below. Make 2 of each.

Fabric 1 Fabric 2 Fabric 3 Fabric 5

8. Ribbon Units -Sew a Fabric 8-K rectangle to either side of a Fabric 6-D rectangle. Press. L E L Make 10. (Fig. 5) K D K

-Sew a Fabric 8-L rectangle to either side of a Fabric 6-E rectangle. Press. Fig. 5 Fig. 6 Make 10.(Fig. 6)

Fig. 7 -Sew the rectangle units to either side of a Fabric 7-G rectangle. Press. Make 10. (Fig. 7) G 9. Wreath Side Units - Mark a diagonal line from corner to corner on a Fabric 8-H square.

-Place Fabric 8-H square, right sides together over a Fabric 4-A rectangle. Sew on the marked line. Trim 1/4" Fig. 6 Make 10 away from your stitched line. Press. 6-1/2" x 13-1/2"

-Repeat on the opposite end.

- Sew a Fabric 8-J rectangle to the botton of the unit. Press. Make 2. H Repeat these steps to making a mirror-image unit. Press. Make 4 sets. A

J Make 4 sets

Fabric 1 Fabric 2 Fabric 3 Fabric 5

11. Sew the Fabric 4 wreath side unit to either side of a Fabric 4 wreath center block. Press. Make 2.

Make 2 12-1/2" x 13-1/2" 12. Repeat step 11 to make the Wreath Blocks pictured. Make 2 of each.

Fabric 1 Fabric 2 Fabric 3 Fabric 5

13. Sew the wreath blocks, ribbon blocks, and side wreath blocks into 4 rows following the picture on p.7. Sew row to row to complete the main quilt top. Press rows in opposite directions and press open when joining the rows..

14. Inner Side Borders: Measure the length of the quilt through the middle:______Sew 3 (Fabric 11) strips together into one continuous strip. Trim to make 2 border strips equal to the measurement above. Sew the strips to each side of the quilt. Press away from center.

15. Inner Top and Bottom Borders: Measure the width of the quilt through the middle:______Sew 3 (Fabric 11) border strips together into one continuouse strip. Trim to make 2 border strips equal to the measurement above. Sew the strips to the top and bottom of the quilt. Press away from center.

Glad Tidings Quilt © Maywood Studio all rights reserved 6 16. Outer Side Borders: Measure the length of the quilt through the middle:______Sew 3 (Fabric 12) strips together into one continuous strip. Trim to make 2 border strips equal to the measurement above. Sew the strips to each side of the quilt. Press toward border

17. Outer Top and Bottom Borders: Measure the width of the quilt through the middle:______Sew 3 (Fabric 12) strips together into one continuous strip. Trim to make 2 border strips equal to the measurement above. Sew to the top and bottom of the quilt. Press toward border.

18. Layer the backing (wrong side up), batting and quilt top (right side up). Baste layers to secure. Quilt as desired. Trim the excess backing and batting.

19. Sew the binding strips together into one continuous strip. Press in half length-wise. Sew the binding to the quilt top with a 3/8” seam allowance. Turn the binding to the back side of the quilt and stitch down by hand with matching thread.