HANDBOOK OF

Soya Chunks Manufacturing

Content

Chapter 1: Introduction 1.1 3 1.2 Nutritional Content of Soybean (Green) per 100g: 4 1.3 Nutritional Content of Mature Soy Seed per 100g: 4-6 1.4 Soy Chunks or Textured (TVP) 6 1.5 Market Potential 7-9 Chapter 2: Technical Aspects of Soya Chunks Processing 2.1 Raw Material 10 2.2 Machine 10-12 2.3 Equipments 12-15 2.4 Production Process 15-16 2.5 Control Parameter 17-18 2.6 Quality Parameter 19 Chapter 3: Packaging of Soya Chunks 3.1 Storage & Shelf Life 20-21 3.2 The factors that lead to spoilage/defects the soya chunks 21-22 3.3 Selection of Packaging Material 22-24

3.4 Frequently-used plastic-based packaging materials 24-26 Chapter 4: Project Components 4.1 Land 27 4.2 Power requirement 27 4.3 Man Power 27 Chapter 5: Safety Regulations and Standards of Soya Chunks Powder

5.1 Standards 28 5.2 Food Safety 28-30 5.3 Labeling Standards 30-32

Soya Chunks 2

Chapter 1 Introduction

1.1. Soybean: The soybean or soya bean (Glycine max) is a species of legume native to , widely grown for its edible bean, which has numerous uses. Soy beans contain significant amounts of phytic acid, dietary minerals and B vitamins. Soy vegetable oil, used in food and industrial applications, is another product of processing the soybean crop. Soybean is the most important protein source for feed farm animals (that in turn yields animal protein for human consumption).

Soybeans are a globally important crop, providing oil and protein. In various United States, the bulk of the harvest is solvent-extracted with hexane, and the "toasted" defatted soymeal (50% protein) then makes possible the raising of farm animals (e.g. chicken, hog, turkey) on a large industrial scale. Soybean products are used in a large variety of processed . can be broadly classified as "vegetable" (garden) or field (oil) types. Vegetable types cook more easily, have a mild, nutty flavor, better texture, are larger in size, higher in protein, and lower in oil than field types. , and soy are among the top edible commodities made using soybeans. Traditional unfermented food uses of soybeans include soy milk, from which tofu and are made. Fermented soy foods include , , nattō, and . Fat- free (defatted) is a significant and cheap source of protein for animal feeds and many packaged meals. For example, soybean products, such as textured vegetable protein (TVP), are ingredients in many meat and dairy substitutes. Soybeans can be processed to produce a texture and appearance similar to many other foods. For example, soybeans are the primary ingredient in many dairy product substitutes (e.g., soy milk, margarine, soy ice cream, , soy cheese, and soy cream cheese) and meat alternatives (e.g. veggie burgers). These substitutes are readily available in most supermarkets

Soya Chunks 3

1.2. Nutritional Content of Soybean (Green) per 100g: Nutrients Quantity Water (g) 68 Energy (KJ) 615 Protein (g) 13 Fat (g) 6.8 Carbohydrates (g) 11 Fiber (g) 4.2 Calcium (mg) 197 Iron (mg) 3.55 Magnesium (mg) 65 Phosphorus (mg) 194 Potassium (mg) 620 Sodium (mg) 15 Zinc (mg) 0.99 Copper (mg) 0.13 Manganese (mg) 0.55 Selenium (μg) 1.5 Vitamin C (mg) 29 Thiamin (B1) (mg) 0.44 Riboflavin (B2) (mg) 0.18 Niacin (B3) (mg) 1.65 Pantothenic acid (B5) (mg) 0.15 Vitamin B6 (mg) 0.07 Folate Total (B9) (μg) 165 Vitamin A (IU) 180 Saturated fatty acids (g) 0.79 Monounsaturated fatty acids (g) 1.28 Polyunsaturated fatty acids (g) 3.2

1.3. Nutritional Content of Mature Soy Seed per 100g: Nutrients Quantity Carbohydrates 30.16 g 7.33 g Dietary fiber 9.3 g Fat 19.94 g Saturated 2.884 g Monounsaturated 4.404 g Polyunsaturated 11.255 g omega-3 1.330 g omega-6 9.925 g

Soya Chunks 4

Protein 36.49 g Tryptophan 0.591 g Threonine 1.766 g Isoleucine 1.971 g Leucine 3.309 g Lysine 2.706 g Methionine 0.547 g Cystine 0.655 g Phenylalanine 2.122 g Tyrosine 1.539 g Valine 2.029 g Arginine 3.153 g Histidine 1.097 g Alanine 1.915 g Aspartic acid 5.112 g Glutamic acid 7.874 g Glycine 1.880 g Proline 2.379 g Serine 2.357 g Vitamin A equiv. 1 μg Thiamine (B1) 0.874 mg Riboflavin (B2) 0.87 mg Niacin (B3) 1.623 mg Pantothenic acid (B5) 0.793 mg Vitamin B6 0.377 mg Folate (B9) 375 μg Choline 115.9 mg Vitamin C 6.0 mg Vitamin E 0.85 mg Vitamin K 47 μg Calcium 277 mg Copper 1.658 mg Iron 15.7 mg Magnesium 280 mg Manganese 2.517 mg Phosphorus 704 mg Potassium 1797 mg Sodium 2 mg Zinc 4.89 mg Water 8.54 g

Soya Chunks 5

Most of the soy products are produced from mature soy seed, hence it’s more vital to understand the nutritional values of mature soy seed, to understand nutrition value of product produced from them. Depending on the process employed a vast array of soy products can be produced from these seeds, though the nutritional value of the product depends on the constituent components drained and retained for given product.

1.4. Soy Chunks or Textured Soy Protein (TVP): Soya chunks or chunks are made from defatted soy flour, a by-product of extracting . It has a protein content which is equal to that of meat. It is quick and also easy to cook. You can prepare many dishes using soya chunks such as soya chunks curry, kurma and even add them to your pulaos, soups, stir fries, etc. TVP is usually made from high (50%) soy protein, soy flour or concentrate, but can also be made from cottonseed, , and oats. It is extruded into various shapes (chunks, flakes, nuggets, grains, and strips) and sizes, exiting the nozzle while still hot and expanding as it does so. The defatted thermoplastic proteins are heated to 150–200 °C (300–390 °F), which denatures them into a fibrous, insoluble, porous network that can soak up as much as three times its weight in liquids. As the pressurized molten protein mixture exits the extruder, the sudden drop in pressure causes rapid expansion into a puffy solid that is then dried. As much as 50% protein when dry, TVP can be rehydrated at a 2:1 ratio, which drops the percentage of protein to an approximation of ground meat at 16%. TVP is primarily used as a meat substitute due to its very low cost at less than a third the price of ground beef and, when cooked together, will help retain more nutrients from the meat by absorbing juices normally lost. Many TVP producers use hexane to separate soy fat from soy protein, and trace amounts of the solvent are left after manufacturing. But the few rodent studies that have been done suggest it would be almost impossible to get enough hexane from TVP to cause harm. Measured levels of residual hexane in TVP are around 20 parts per million; and studies in rodents suggest that 5 g/kg is the minimum dose at which undesirable effects may be observed. TVP can be made from soy flour or concentrate, containing 50% and 70% soy protein, respectively; they have a mild beany flavor. Both require rehydration before use, sometimes with flavoring added in the same step. TVP is extruded, causing a change in the structure of the soy protein which results in a fibrous, spongy matrix, similar in texture to meat. In its dehydrated form, TVP has a shelf life of longer than a year, but will spoil within several days after being hydrated. In its flaked form, it can be used similarly to ground meat.

Soya Chunks 6

1.5. Market Potential: The global soy food market was worth US$ 40.5 Billion in 2019. Soybean is a type of legume, native to East Asia, which is low in saturated fats but high in protein, vitamin C and folate. It is a good source of iron, fiber, calcium, magnesium, potassium, phosphorus and omega-3 fatty acids. As a result of its nutrient content, it offers various health benefits such as lowering the blood cholesterol level, increasing bone density and minimizing the risk of developing cancer. It is widely used as an alternative of meat in several dishes and is added in various vegan-friendly food products. The rising demand for plant-based foods is strengthening the growth of the soy food market across the globe. Soybean is used for preparing numerous products including soymilk, soy flour, tofu, tamari, tempeh, , , natto and . Currently, the demand for tofu is rising around the world, especially among the vegan and vegetarian population. It is an excellent substitute for cheese, which can be consumed by lactose intolerant consumers. The growing sales of tofu can also be accredited to its resemblance to meat in its form, color, taste and texture. Apart from this, other soy food products such as snacks and beverages are also experiencing steady growth in their demand worldwide on account of the growing health awareness among consumers. Further, manufacturers are investing in research and development activities to introduce new variants of soy food products to expand their product portfolio and attract new consumers. Looking forward, IMARC Group expects the global soy food market to exhibit moderate growth during the next five years. Nutritious value and versatility of ingestible forms act as growth levers for the global soy food products market. As consumers move towards health-conscious diets, soy food products present an ideal alternative for dairy, meat, and poultry intensive diets. Recent surveys have revealed that about 40% consumers below 35 years consume soy at least once a week, twice that of consumers aging 55 years or older. As per latest data, nearly 80% of consumers have tried some of the most prevalent soy food products or beverages. Driven by such factors, the global soy food products market is expected to grow at an impressive CAGR over the forecast period, 2020-2030.

1.5.1. Growth Drivers & Trends: Prevalence of heart diseases is creating a lateral shift in consumer preference for cooking oil. Heart diseases are a leading cause of mortality in the US, causing about 650, 000 deaths every year. Health-conscious consumers are looking for low bad-cholesterol heart-friendly alternatives to conventional cooking oil. Although presence of alternatives such as olive oil is hindering market growth, manufacturers are expanding their production capacities to distribute their products at competitive pricing. According to the World Soy Oil Processors Association (SOPA), the global soy oil production in 2019-2020 was more than 56 million metric tons. Soy-oil is a healthier alternative; successful marketing campaigns are viewing millennials and geriatrics as their target consumer base. Players must capitalize on soy oil will to maintain their positive trend in the marketplace.

Soya Chunks 7

1.5.2. Growth Restraints: Some studies have associated soy food products with possible side effects such as menopause symptoms, cancer risk, and increased cholesterol levels. In addition, is among the most common food allergies, particularly in toddlers and infants. Studies find that about 0.4% of infants are allergic to soy. While in some cases, the allergy subsides during infancy, in worst cases, the problem continues through adulthood.

1.5.3. COVID-19 Impact: While consumers have been increasingly shifting towards health-centric products, the COVID-19 pandemic has provided further impetus to the trend. Amid nationwide lockdowns in several countries, many leading meat plants have been shut down in order to avoid further contagion of coronavirus. This potential of scarcity of meat supply is influencing consumers to turn to plant-based meat products, with meat alternatives such as tofu witnessing phenomenal sales in developed regions. Such trends are working in favor of soy food products market amid the pandemic.

1.5.4. Region Wise Analysis: North America remains the frontrunner in soy food products market owing to presence of key soy oil processing locations - the US and Canada. According to SOPA estimates, the US produced the highest soy oil at a substantial 11 Mn metric tons. Revenue opportunities will also come from continued growth in consumer demand for soy oil and soy-based products. Increasing health consciousness among consumers is driving financially rewarding traction for soy food product manufacturers. Miso, tempeh, and tofu are some of the most popular dairy and alternative meat products. Further, soy is also the only plant- based protein to carry a Food & Drug Administration (FDA) heart health claim.

However, Asia Pacific (APAC) will emerge as a lucrative soy food products market. Rising consumption of convenience foods owing to fast-paced lifestyle is creating a fertile breeding ground for manufacturers. In addition, consumers are showing greater preference for functional food products. As such, market players must tap these opportunities to expand their footprint in APAC..

1.5.5. Indian Market: Soy Product Market is projected to record a CAGR of 3.8% during the forecast period (2020-2025).

The market is primarily driven by the increasing number of consumers seeking non-dairy beverage alternatives have led to substantial growth in the demand for soy milk beverages market. In addition, new food production technology and new varieties of soybeans result in new flavors creates competition with cow’s milk and dairy products.

Soya Chunks 8

Furthermore, the various health benefits of soy milk such as less cholesterol, heart disease reduction and the increasing number of health-conscious consumers are also few of the factors driving the market.

1.5.6. Competition in Indian Market: The India Soy Product Market is consolidated, owing to the presence of a fewer number of regional and domestic players from different countries. Emphasis is given on the merger, expansion, acquisition, and partnership of the companies along with new product development as strategic approaches adopted by the leading companies to boost their brand presence among consumers. Key players dominating the regional market include The Hershey Company, Life Health Foods India Private Limited, and Chetran Foods Private Limited. Other players in the Indian market include Pacific Foods Of Oregon LLC, The Hain Celestial Group, Inc., SoyLife, Neon India, and Invigorate Foods Pvt. Ltd. among others.

Soya Chunks 9

Chapter 2

Technical Aspects of Soya Chunks Processing

2.1.Raw Material:

The Soy Flour or Soybean can both be used as raw materials but if soy beans are being used then the process starts with soybean processing into soy flour. The conversion of soy flour into defatted soy flour, then the actual soy chunks manufacturing process can start. The process discussed in this material is soya chunks manufacturing from defatted soy flour, thus the raw material required are Defatted Soy Flour & Packaging Material.

Defatted Soya Flour (Toasted) is obtained by milling from selected, pre-cleaned, cracked, dehulled and solvent extracted `NON GMO` Soybeans. It is natural product which does not contain additives or preservatives. Defatted Soya Flour (Untoasted) is obtained, by milling from selected pre-cleaned, cracked, dehulled and solvent extracted `NON GMO` Soybeans through FDS (Flash Desolventising System) technology. It is a natural product which does not contain additives or preservatives.

2.2.Machine:

2.2.1. Flour Sifter:

It’s a sifter class machine which is used to perform sifting process and remove any larger particulate impurities from flour. It’s used at starting of the manufacturing process to remove any impurities from flour.

Soya Chunks 10

2.2.2. Soy Chunk Extruder:

It’s a type of extruder that is specifically designed for soy chunks, in this case the soy flour and water are mixed & cooked within the extruder itself followed by extrusion at high pressure along with high temperature due to cooking. Which ultimately results in textured food product.

2.2.3. Soy Chunk Dryer:

It’s a simple machine designed to remove moisture for freshly extruded soy chunks in order to make them dry and ready for packaging. This machine is utilized after chunk extrusion to help soya chunks retain there shapes.

Soya Chunks 11

2.2.4. Nitrogen Flush Packaging Machine:

The functioning of machine is simple, it forms an open pouch by two step sealing followed by filling, nitrogen flushing and final sealing to obtain the soya chunks filled packet.

2.3. Equipment:

2.3.1. SS Storage Vessel:

They are used to store various liquid solution at required conditions, Like after the soy milk is prepared this equipment is used to store the soy milk. Therefore, they serve as machines for temporary storage and transports the right amount of soy milk to the next device in operation on the basis of device capacity.

Soya Chunks 12

2.3.2. SS Storage Tanks:

It’s a simple tank designed to hold required product.

2.3.3. Dry Bean Tank

These equipments are class of storage equipments which are specifically designed for dry raw material of small granule composition.

Soya Chunks 13

2.3.4. Food Grade Conveyor:

These are conveyors with food grade belt to maintain food safety standards set by monitoring authorities.

2.3.5. Other Material Handling Equipments:

They are simply used to hold and transfer given material efficiently.

Soya Chunks 14

2.3.6. Power Distribution Equipments:

They are used to safely receive and distribute electrical power.

2.4. Production Process: Extrusion cooking has been defined as ‘the process by which moistened, expansile, starchy and/or proteinaceous materials are texturized in a tube by a combination of moisture, pressure, heat and mechanical shear. This results in elevated product temperatures within the tube, gelatinization of starchy components, denaturization of proteins, the stretching or restructuring of tractile components and the exothermic expansion of the extruder”.

Extrusion is widely used to accomplish this restructuring of protein-based foodstuffs to manufacture a variety of textured convenience foods. When mechanical and thermal energy are applied during the extrusion process, the macromolecules in the proteinaceous ingredients lose their native, organized structure and form a continuous, visco-elastic mass. The extruder barrel, screws and die align the molecules in the direction of flow. This realignment “exposes bonding sites that lead to cross-linking and a reformed, expandable structure’ that creates the chewy texture in fabricated foods.

Soya Chunks 15

Traditionally the most popular raw material for production of textured vegetable proteins in an extrusion system has been slightly toasted defatted soy flour. This defatted soy flour usually meets the following characteristics: 50% protein minimum, 3.5% fiber maximum, 1.5% fat maximum and PDI of 60 to 70.13 This along with greater simplicity of extrusion gives the process a cost advantage over the spinning (Boyer) process which uses isolated soy protein. A cooker-extruder is used to force the protein material through a die that controls the size and shape of the texturized material.In operation, the extrusion is quite simple, but does require considerable experience in the handling of the equipment. At first, the raw material is pre- moistened to levels of 15-40 percent (with special additives sometimes added to the preconditioning water). The mixture is agitated until homogenous. It is then fed to the extruder while the screw is rotated at a substantial speed. Steam and water are used in alternate jacket sections for heating and cooling. Cooling is usually carried out near the feed section of the extruder. The meal mixture is advanced within the extruder while being heated to high temperatures and subjected to elevated pressures.

The mechanically worked mixture becomes a viscous fluid-type substance that is forced through a restrictor orifice after 30 to 60 seconds' retention time in the extruder. As the product emerges from the die outlet, the superheated moisture contained in the meal enters the substantially lower atmospheric pressure environment where flash-off evaporation of part of the moisture expands the product into a porous structure. Evaporation also cools the product substantially.

The expanded product is very porous and has a fibrous network structure somewhat resembling that of meat.14 The product can be kept moist and used directly for food materials, or can be dried and packed conveniently for later use. It rehydrates rapidly and completely within a few seconds merely by adding water (usually about two parts for one part solids) to yield a product with excellent food characteristics.

Finished products (chunks/granules) are then packed through packing spouts in bags. Wholesale Packaging of products can be done through an Automatic Weighing and Bagging machine, which can pack the chunks/granules in 10 kg-100 kg capacity bags. In general, 25 kg and 50 kg size bags are used in wholesale. On an average, such bagging machine can give an output of 250 to even 500 bags per hour. For retail packaging (i.e. 1 kg, 2 kg and 5 kg), a liner carton machines with multi-head weighers can be used.

Soya Chunks 16

2.5. Control Parameter: There are several parameters which control the output of the soy processing plant, some of the important parameters are discussed below: 2.5.1. Production Rate: Production rate, in terms of manufacturing, refers to the quantity of goods that can be produced during a given period of time. Alternatively, the production rate is also the amount of time it takes to produce one unit of a good.

Companies often strive for high production rates to help lower the time and cost of a project or the production process. However, a higher production rate can also lead to a decrease in quality if more mistakes are made as employees push to have more units produced or more of a building completed.

2.5.2. Grinding Temperature: During grinding, the temperature of the product rises to a level in the range of 42±95°C which varies with the oil and moisture content of the foods, but foods lose a significant fraction of their volatile oil or flavoring components due to this temperature rise.

The grinding temperature needs to be maintained in order to prevent variation in taste as well as unwanted vaporization, for soybeans and several other products it’s maintained via a water jacket system, whose water has its own cooling system.

2.5.3. Grinding Force: The three types of forces involved in size reduction of solids are compression, impact and shear. Compression is a grinding force, like when you pulverize cereal in a mortar. Impact occurs when material is thrown against a surface causing it to disintegrate. For example, if you take an egg and throw it against a wall causing it to splatter, that’s an example of impact. Shear is a slicing force where you have one surface sliding over another.

For soybean and several other solid grains a combination of all is used but depending on machine used we have one dominant force like in hammer will impact is dominant.

Soya Chunks 17

2.5.4. Grinding Speed: It simply refers to speed at which the given material is being ground, it can be measured either by actual material input & output or it can be defined by bade or hammer speed. Other less common method include utilizing circumferential speed.

Hammer mill shaft rotate at a much slower speed than blade grinders, which may rotate at speeds as high as 20,000 to 30,000 rpm; for example, the Steele model mixer-grinder by Indian appliance manufacturer Preethi has a no-load speed of 23,500 rpm and loaded speed of 11,500rpm.

2.5.5. Pore Size: Filtration is a physical, biological or chemical operation that separates solid matter and fluid from a mixture with a filter medium that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter medium are described as oversize and the fluid that passes through is called the filtrate.

The size of the largest particles that can successfully pass through a filter is called the effective pore size of that filter. For soy milk this value is 400 nm

2.5.6. Cooking Temperature: It’s simply the temperature at which given food item is to be cooked, Any processed food product has an optimum range of cooking temperature at which it must be cooked to obtain the desired product.

Low temperature results in insufficient cooking, while the high temperature results in localized burning and the improper cooking temperature also corrodes taste. Therefore it’s essential to maintain cooking temperature.

2.5.7. Cooling Temperature: It simply refers to the temperature at which the given food product is being cooled, which is usually followed after cooking, heating and during pasteurization. The improper cooling may also affect taste and moisture.

2.5.8. Moisture Content: Moisture is the presence of a liquid, especially water, often in trace amounts. Small amounts of water may be found, for example, in the air, in foods, and in some commercial products.

It can be indirectly controlled via other parameters like various temperature and sometimes balance is maintained by adding extra water during certain process.

Soya Chunks 18

2.6. Quality Parameter: There are several parameters which control the quality of end product, some of these important parameters are discussed below: 2.6.1. Appearance: The most important attribute of any food's appearance is its color, especially when it is directly associated with other food-quality attributes. Other attribute include shape, surface profile and visible texture. Food presentation is just as essential to the success of a food product as its taste and flavour.

2.6.2. Taste: The gustatory system or sense of taste is the sensory system that is partially responsible for the perception of taste (flavor). Taste is the perception produced or stimulated when a substance in the mouth reacts chemically with taste receptor cells located on taste buds in the oral cavity, mostly on the tongue.

The various food product have their unique tastes any deviation from them will lead to deviation in final dish, hence it’s essential to maintain uniform taste in processed food products.

2.6.3. Nutritional Content: Nutritional value or nutritive value as part of food quality is the measure of a well-balanced ratio of the essential nutrients carbohydrates, fat, protein, minerals, and vitamins in items of food or diet in relation to the nutrient requirements of their consumer.

Higher the nutritional content of a product higher is it’s quality, as appropriate ingredients must have be added along with the base ingredient to elevate nutritional value.

2.6.4. Shelf Life: Shelf life is the length of time that a commodity may be stored without becoming unfit for use, consumption, or sale. It comes into play after appearance, taste and nutrition, given a choice in products with same nutritional content and taste one tends to opt for the product with more shelf life.

2.6.5. Packaging: It also defines the quality of the product, apart from essentials like food grade packaging material, the type of process and technology further elevates the quality of product, for example anti-microbial packaging adds to product value thus quality.

Soya Chunks 19

Chapter 3

Packaging of Soy Chunks

3.1. Storage & Shelf Life: Food storage is defined as storage of given food item over particular period of time in edible state, however in generally refers to food stored for a long period time. Shelf life is defined in two ways:  "best if used by": Length of time food retains most of its original taste and nutrition.  "life sustaining": Length of time foods can be stored and still be edible. There can be a big time difference between these two types of food products. Foods bought at the grocery store can have a shelf life of a few days to several years, depending on the type of food, the storage conditions, and the packaging. The "life sustaining" foods are those that are packaged specifically for long term storage. The estimated shelf life for many of these products has increased to 30 years or more. The longer food is stored, taste and nutritional quality declines, depending on the quality of the food when first packaged. However, studies have shown that freeze-dried and dehydrated foods, properly packaged and sealed, even if stored past their designated time, retain their calories, and calories will sustain life in an emergency and prevent starvation. The shelf life of food stored depends on these 4 main criteria: 3.1.1. Temperature: Foods stored at room temperature or cooler (75°F/24°C or lower) will be nutritious and edible much longer than previously thought according to findings of recent scientific studies. Foods stored at 50°F to 60°F (which is optimal) will last longer than foods stored at higher temperatures. Heat absolutely destroys food and its nutritional value. Proteins break down and some vitamins will be destroyed. Taste, color, and smell of some foods may also change.

3.1.2. Moisture: The reason long term food storage is dehydrated or freeze dried is to eliminate moisture. Too much moisture promotes an atmosphere where microorganisms can grow and chemical reaction in foods causing deterioration that ultimately can sicken us.

Soya Chunks 20

3.1.3. Oxygen: Too much oxygen can deteriorate foods and promote the growth of microorganisms, especially in fats, vitamins, and food colors. That is the reason to use oxygen absorbers when dry packing your own food products.

3.1.4. Light: Exposure to too much light can cause deterioration of foods. In particular if affects food colors, vitamin loss, fats and oils, and proteins. Keep long term food storage in low light areas for longest shelf life. Therefore, the soy products like soy milk, soy paneer have lower shelf life then the products like soybean oil which in turn have lower shelf life then dry products like soy chunks. Soy milk is sold in two varieties: refrigerated and non-refrigerated. Both types of soy milk must be refrigerated once opened, and typically last 7-10 days in the fridge. Before they're opened, the expiry date on the carton is a good indicator of its shelf life. Products often stay good after 10 days. The soy milk sold on shelves is similar to canned food in that it lasts a long period of time in your cupboard if it's not opened. It can have expiry dates that last as long as 8 months. Soya paneer or Tofu is made by coagulation of water and soyabean with lemon juice . To increase the shelf life different methods are used like immersion in liquid , smoking and both together. The temperature is maintained between 24–37 degree Celsius and tofu could be stored for upto 5–10 days. Shelf life could be extended to 10–15 days without refrigerator by smoking and storing in a strong brines solution acidifying it with lemon juice. Products like Soy Textured Protein in its dehydrated have long shelf life and simultaneously have high nutritional value, although the sensory quality showed a decline by the end of 12 months storage period, the overall acceptability of the product on the 9 point Hedonic scale, remained very good. It is inferred from various studies that packaging of TSP in HDPE‐500 Primary Sac and HDPE woven Secondary Sac, keeps the product shelf stable up to one year even under diverse climatic conditions.

3.2 The factors that lead to spoilage/defects the soya chunks are highlighted as below:

 Blemishes - Scars, discoloration, sunburn, dark spots, black nose, or similar abnormalities in surface appearance affecting an aggregate area greater than that of a circle 7 mm in diameter.

 Dirt-preparation of packaging in an open area can lead to this problem. dirt can reduce the quality of soya chunks.

Soya Chunks 21

 Insects and mites- as it is sweet and prepared from it can be damaged by insects or mites or contaminated by damage and contamination the presence of dead insects or mites, fragments of insects or mites, or their excreta.

 Scouring- Breakdown of the sugars into alcohol and acetic acid by yeasts and bacteria.

3.3. Selection of Packaging Material Factors to consider include product damage, fines, stickiness, bag opening size, re-closure among other things. In selection of packaging materials for sweet packaging the following need to be considered:

3.3.1. Water Vapour Transmission Rate (WVTR) Knowledge of WVTR of packaging materials and the effect of folding, creasing, crumpling of materials on papers and aluminum foil show considerable effect. However, thermoplastic materials are not much affected. Effect of Folding and Crumpling on the WVTR

3.3.2. Gas Transmission Rate Permeability to gases like oxygen decides the shelf-life of oxygen sensitive fruit items. The oxygen transmission rates (OTR) of some plastic materials and the effect of folding and crumpling.

Soya Chunks 22

Effect of Folding and Crumpling on the OTR

Besides OTR, permeability to volatiles and flavours is important in candies packaging. Polyolefins have high values, whereas plastics such as polyester, nylons, ethylene vinyl alcohol (EVOH) have good barrier properties for transmission of volatiles. The odour permeability’s (for volatiles used in candies) of some materials.

Odour Transmission of Packaging Materials

3.3.3. Tensile Strength & Elongation Tensile Strength and Elongation properties of materials need to be studied as their running on high- speed machines should be suitable.

Soya Chunks 23

3.3.4. Tear Strength For a fruit processed product, tear strength is of importance as low tear values are necessary and useful for opening packages by hands.

3.3.5. Heat Seal Strength The performance of a finished package is determined by the effectiveness of the package seal i.e. the permeability to water vapor, gases and volatiles increase if the seal is not perfect. Thermoplastic films such as polyethylene give excellent heat seals.

3.3.6. Performance Properties Apart from the above mentioned important properties, a material has to perform well on machines; therefore knowledge of physical properties like slip, stiffness, blocking resistance is also necessary. Twist retention for twist wrap is also of importance. The initial function of packaging is to protect. However, the emotional role played by packaging is also of importance, especially when the confection is a gift. A sophisticated packaging using deluxe materials is often used as a way of expressing feelings. Packaging must also be specialized for specific target groups. A different pack size is required for quick impulse buys at petrol stations and roadside shops than for the super markets selling predominantly family sized packs.

3.4. Frequently-used plastic-based packaging materials

A very high quantum of polymeric materials, besides cellulosic and aluminum foil, are used for packaging items. Paper board and metal containers are also used for certain applications. Although a variety of packaging materials are available, the ultimate choice of the wrapper depends upon the required shelf-life, performance of the wrapping machine, and the cost which is purely based on the segment of the market targeted by the manufacturer.

The most common choice of packaging medium is plastic (generally flexible) as it provides the required protection and preservation, grease resistance, physical strength, machinability, and printability. Plastics being lighter in weight are, therefore, the most preferred material for packaging of sweets.

Soya Chunks 24

There are many changing trends in the packaging of soya chunks. Plastic films and their laminates are increasingly used due to better properties and aluminum foil laminates due to price and better flex crack property. Plastic-based packaging materials that can be used for soya chunks are listed below.

 Polyethylene (PE) It is considered to be the backbone of packaging films. Since one of the greatest threats to the quality of sweets comes from moisture, polyethylene with its low water vapor transmission is of definite interest. Polyethylene films are fairly free of plasticizers and other additives and are quite extensively used as a part of lamination. Its ability to heat seal increases its value. Low-Density Polyethylene (LDPE) is an economical material with low WVTR, however, it has high permeability’s to flavors/volatiles, poor grease resistance, and are limp. High- density polyethylene (HDPE) is stiffer, more translucent, and has better barrier properties but needs a higher temperature for sealing. Later additions include high molecular weight high-density polyethylene (HM HDPE) and linear low-density polyethylene (LLDPE). HM HDPE is a paper-like film with high physical strength and barrier properties but is less transparent than ordinary polyethylene. HM HDPE is available in twist-wrap grades. Polyethylene films are also suitable for making bags. A copolymer of polyethylene and polyvinyl alcohol and EVOH has outstanding gas barrier properties especially when dry.

 Polypropylene Polypropylene films have better clarity than polyethylene and enjoy superior machinability due to stiffness. Lack of good salability has been a problem; however, PVDC and vinyl coating have been used to overcome this problem. Some varieties of PP have been specially developed for twist-wrap applications as they have the ability to lock in position after twisting. Paralyzed polypropylene with an opal finish and attractive gloss is also used. Both as laminates and overwraps, PP film is now widely used for all types packaging applications.

Soya Chunks 25

 Poly Vinyl Chloride (PVC) PVC is a stiff and clear film having a low gas transmission rate. PVC can be used as small wraps, bags, and pouches. PVC when co-polymerized with polyvinylidene chloride is known as Saran. Since it is a costly material, it is only used as a coating to obtain barrier properties and heat salability. PVC film is also used for twist wraps, as it has twist retention properties and is excellent on high-speed machines.

 Polyesters (PET) and Polyamide (PA) Polyethylene terephthalate film has high tensile strength, gloss, and stiffness as well as puncture resistance. It has moderate WVTR but is a good barrier to volatiles and gases. To provide heat seal property, PET is normally laminated to other substrates. Nylons or polyamides are similar to PET but have high WVTR.

 Metal-Plastic Laminate Films When polymeric films are metalized there is an improvement in their barrier properties. Metallization is also used for decorative purposes and aesthetics. The films, which are used for metallization, are PVC, PET, PP, and polyamides. To safeguard the interest of the consumer the Standards of Weights & Measures (Packaged Commodities) Rules, have imposed a limit on the weight of the wrapper.

Soya Chunks 26

Chapter 4 Project Component of Soy Chunks

4.1. Land- The approximate total area required for a complete small scale factory setup is 3000- 4000 Sq. ft. approximately smooth production.

4.2. Civil work-

 Processing plant Area- This area includes the machinery setup and foundation space for all tools and equipment etc. The total processing plant area is approx. 1500 Sqft.  Inventory Area- This area includes the storage space for all the raw materials, finished Product area. Total inventory area is approx. 500 Sqft.  Office Area – This space includes staff working region, their accommodation space, canteen area, medical facility, etc. The total workshop area is approx. 500Sqft. This may be considered above the ground floor.  Parking Space, Electricity Utensils Mounting Space, and Others. This could be approx. 500Sqft.

Land and building requirements may vary depending on the size of project.

4.3. Miscellaneous Assets-

 Water Supply Arrangements  Furniture

4.4.Power requirement- The manufacturing unit requires 10-12 KW.

4.5. Man power requirement- For a small unit to begin with around 8-10 people is required including skilled, non- skilled worker and a supervisor..

Soya Chunks 27

Chapter 5 FSSAI Standards of Soy Chunks

5.1.Food Standards

The standards for Soya Chunks Whole and Soya Chunks powder are defined under Regulation 2.9.7 of FSSAI’s Food Products Standards & Food Additives regulations, 2011. Soya Chunks whole is the dried mature fruits (seeds) of Coriandrum sativum L. Soya Chunks whole is the dried mature fruits (seeds) of Coriandrum sativum L. It must have characteristic aroma and flavour and shall be free from mould, living and dead insects, insect fragments, rodent contamination and added colouring matter. The standards for Dhania Whole are based on Extraneous matter, Split fruits, Damaged/Discoloured fruits, Moisture, Volatile oil content on dry basis, Total ash on dry basis, Ash insoluble in dilute HCl on dry basis and Insect damaged matter

5.2.Food Safety

Part I - General Hygienic and Sanitary practices to be followed by Petty Food Business Operators applying for Registration

SANITARY AND HYGIENIC REQUIREMENTS FOR FOOD MANUFACTURER/ PROCESSOR/HANDLER

The place where food is manufactured, processed or handled shall comply with the following requirements:

1. The premises shall be located in a sanitary place and free from filthy surroundings and shall maintain overall hygienic environment. All new units shall set up away from environmentally polluted areas.

2. The premises to conduct food business for manufacturing should have adequate space for manufacturing and storage to maintain overall hygienic environment.

Soya Chunks 28

3. The premises shall be clean, adequately lighted and ventilated and sufficient free space for movement.

4. Floors, Ceilings and walls must be maintained in a sound condition. They should be smooth and easy to clean with no flaking paint or plaster.

5. The floor and skirted walls shall be washed as per requirement with an effective disinfectant the premises shall be kept free from all insects. No spraying shall be done during the conduct of business, but instead fly swats/ flaps should be used to kill spray flies getting into the premises. Windows, doors and other openings shall be fitted with net or screen, as appropriate to make the premise insect free The water used in the manufacturing shall be potable and if required chemical and bacteriological examination of the water shall be done at regular intervals at any recognized laboratory.

6. Continuous supply of potable water shall be ensured in the premises. In case of intermittent water supply, adequate storage arrangement for water used in food or washing shall be made.

7. Equipment and machinery when employed shall be of such design which will permit easy cleaning. Arrangements for cleaning of containers, tables, working parts of machinery, etc. shall be provided.

8. No vessel, container or other equipment, the use of which is likely to cause metallic contamination injurious to health shall be employed in the preparation, packing or storage of food. (Copper or brass vessels shall have proper lining).

9. All equipments shall be kept clean, washed, dried and stacked at the close of business to ensure freedom from growth of mould/ fungi and infestation.

10. All equipments shall be placed well away from the walls to allow proper inspection.

11. There should be efficient drainage system and there shall be adequate provisions for disposal of refuse.

12. The workers working in processing and preparation shall use clean aprons, hand gloves, and head wears.

Soya Chunks 29

13. Persons suffering from infectious diseases shall not be permitted to work. Any cuts or wounds shall remain covered at all time and the person should not be allowed to come in direct contact with food.

14. All food handlers shall keep their finger nails trimmed, clean and wash their hands with soap, or detergent and water before commencing work and every time after using toilet. Scratching of body parts, hair shall be avoided during food handling processes.

15. All food handlers should avoid wearing, false nails or other items or loose jewellery that might fall into food and also avoid touching their face or hair.

16. Eating, chewing, smoking, spitting and nose blowing shall be prohibited within the premises especially while handling food.

17. All articles that are stored or are intended for sale shall be fit for consumption and have proper cover to avoid contamination.

18. The vehicles used to transport foods must be maintained in good repair and kept clean.

19. Foods while in transport in packaged form or in containers shall maintain the required temperature.

20. Insecticides / disinfectants shall be kept and stored separately and `away from food manufacturing / storing/ handling areas.

5.3.Labeling Standards (2.2.2)

Labeling requirements for packaged food products as laid down in the Part VII of the Prevention of Food Adulteration (PFA) Rules, 1955, and the Standards of Weights and Measures (Packaged Commodities) Rules of 1977, require that the labels contain the following information:

1. Name, trade name or description 2. Name of ingredients used in the product in descending order of their composition by weight or volume

Soya Chunks 30

3. Name and complete address of manufacturer/packer, importer, country of origin of the imported food (if the food article is manufactured outside India, but packed in India) 4. Nutritional Information 5. Information Relating to Food Additives, Colors and Flavors 6. Instructions for Use 7. Veg or Non-Veg Symbol 8. Net weight, number or volume of contents 9. Distinctive batch, lot or code number 10. Month and year of manufacture and packaging 11. Month and year by which the product is best consumed 12. Maximum retail price Provided that — (i) the nutritional information may not be necessary, in case of foods such as raw agricultural commodities, like, wheat, , cereals, spices, spice mixes, herbs, , table salt, sugar, jaggery, or non –nutritive products, like, soluble tea, coffee, soluble coffee, coffee- chicory mixture, packaged drinking water, packaged mineral water, alcoholic beverages or fruit and vegetables, processed and pre- packaged assorted vegetables, fruits, vegetables and products that comprise of single ingredient, pickles, papad, or foods served for immediate consumption such as served in hospitals, hotels or by food services vendors or halwais, or food shipped in bulk which is not for sale in that form to consumers.

Wherever applicable, the product label also must contains the following

The purpose of irradiation and license number in case of irradiated food. Extraneous addition of coloring material. Non-vegetarian food – any food which contains whole or part of any animal including birds, fresh water or marine animals, eggs or product of any animal origin as an ingredient, not including milk or milk products – must have a symbol of a brown color-filled circle inside a brown square outline prominently displayed on the package, contrasting against the background on the display label in close proximity to the name or brand name of the food. Vegetarian food must have a similar symbol of green color-filled circle inside a square with a green outline prominently displayed.

Soya Chunks 31

All declarations may be: Printed in English or Hindi on a label securely affixed to the package, or Made on an additional wrapper containing the imported package, or Printed on the package itself, or May be made on a card or tape affixed firmly to the package and bearing the required information prior to customs clearance.

Exporters should review the Chapter 2 of the “FSS (Packaging and Labeling) Regulation 2011” and the Compendium of Food Safety and Standards (Packaging and Labeling) Regulation before designing labels for products to be exported to India. FSSAI revised the labeling Regulation and a draft notification to that effect was published on April 11, 2018, inviting comments from WTO member countries and the comments received are under review and the publication date remains unknown.

According to the FSS Packaging and Labeling Regulation 2011, “prepackaged” or “pre packed food” including multi-piece packages, should carry mandatory information on the label.

Soya Chunks 32