Axeda Supervisor™ The complete InternetInternet----basedbased solution for control and information

WizWizconcon 99.1.1.1.1 WizWizAAMAAM User Guide October 2002005555

Axeda Systems Inc. Axeda Systems SAS Axeda Systems Ltd Axeda Systems BV 21 Oxford Road Parc Technologique de Lyon The Gate Hotel, Scotland Gate Concordiaweg 149-151 Mansfield, MA 02048 12 allée Irène Joliot-Curie Northumberland Postbus 351 USA F-69791 Saint-Priest Cedex NE62 5SS NL-4200 AJ Gorinchem tel +1 (508) 337-9200 France UK Nederland fax +1 (508) 337-9201 tel +33 (0)4 72 47 98 98 tel +44 (0)845 606-6120 tel +31 (0)183 646 303 fax +33 (0)4 72 47 98 99 fax +44 (0)845 606-6121 fax +31 (0)183 621 601 www.wizcon.com http://support.wizcon.com JERICHO version 3.0 (build 64)

Configuration of the drivers

1. Beep Driver (v. 5.0.2) ...... 2 2. Email driver (v. 1.0.2.6) ...... 3 3. ASCOM driver (v. 1.0) ...... 4 4. Fax driver (v. 4.07) ...... 5 5. ERMES/UCP driver (v. 2.9) ...... 6 6. GSM driver (v. 2.3) ...... 7 7. IAT driver (v. 1.2a)...... 8 8. MAPI-Mail driver (v. 1.1)...... 9 9. NetPrinter driver (v. 1.02) ...... 10 10. Tele-Printer driver (v. 4.0)...... 11 11. Minitel driver (v. 4.2.1) ...... 12 12. TAP driver (v. 4.7)...... 13 13. Text driver (v. 1.0)...... 14 14. Vocal driver (v. 1.0)...... 15

1. Beep Driver (v. 5.0.2)

Description: The Beep driver is used for numerical paging systems whose server accepts DTMF codes (Dual-tone-multi-frequency). This driver can be used with vocal or not vocal, numerical or analogical modems; the only requirement is the generation of DTMF codes.

Options of configuration:

General options: - Dial number : number of the server. - Internal number (no prefix) : Force dialling without prefix for internal number. - Wait for remote pickup : If the option is checked, Jericho calls the server and waits until this one answer before transmitting the request for sending message. This option works only for modems able to detect phone pickup, i.e. a numerical modem or a vocal analogical modem. - Address size max : maximum length of a pager number. 0 means no limit. - Address size exact : If this option is checked, the size of the pager number must equal to the size indicated in the field ' Address size max '.

Address transmission : - Temporizing before sending address (s) : Time in second to wait before the emission of the address. This duration starts when the server answers if the option 'Wait for remote pickup' is checked or at the end of the dialling. - End address DTMF code : DTMF code to send after the address.

Message transmission: - Temporizing before sending address (s) : Time in second to wait before the emission of the message. - Message header : Sequence of DTMF codes to send before the message. - Message end : Sequence of DTMF codes to send after the message. - End message DTMF code : DTMF code to send after the message (like ‘Message end’).

Message validation : - Temporizing for validation (s) : Time in second to wait before transmitting DTMF code of validation. - Validation DTMF code : DTMF code to send after the message after a temporization.

Services configured : - Tatoo numeric (France). - Bip-Plus (France).

2. Email driver (v. 1.0.2.6)

Description : The email driver is used to send emails through a SMTP server. A remote access connection can be used if the server can’t be reach directly.

Configuration options :

General options : - Default sender : If the sender is not specified with the message, the default sender is used. - Default subject : If the subject is not specified with the message, the default subject is used.

Connection to the mail server : You can choose here how the driver connects to the mail server : - Connect to the server using a local area network : choose this option if your mail server is located on your local area network or if you have a direct Internet connection. - Connect to the server using a modem : choose this option if Jericho must establish a remote access connection before connecting to the mail server. o Dial using the connection : Specify here the remote access connection to use. o Login… : When you have chosen a remote access connection, click on this button to enter the user ID and password for this connection. - SMTP server address : Enter here the network address of your mail server, you can type an IP address like 192.168.10.2 or a network name like mail.domain.com. - Your e-mail address : this e-mail address will be used to indicate the sender of emails sent by Jericho.

3. ASCOM driver (v. 1.0)

Description : The ASCOM driver allows using an ASCOM system by serial link or by modem to send messages to alphanumeric pagers.

Configuration options : - Protocol : Selection of the communication protocol with the ASCOM system. This protocol has to be chosen in function of the equipment interface (T940SI / P940AI). - Wait to transmit (sec) : When this value is not zero, a message will be considered as transmitted only on reception of the call performed indication from the ASCOM system. This option allows a more accurate control of the transmission (notably the management of receiver absence), but it decrease the performance of message transmission. The value defines the maximum timeout for waiting for the message transmission from the ASCOM system. - Number of beeps : Selection of the number of beeps emitted by the pager on message reception, 0 to 9 (0 = 10 beeps). - Number of transmissions : Selection of the number of message transmissions to be performed by the ASCOM system, 1 to 9. - Messages priority : Selection of the priority of the transmitted message, 1 = urgent alarm, 2 = high priority, 3 = normal priority. - Header : Enter here the header text that will be transmitted before each message. The header can include the following information codes : o &D : message date (JJ/MM) o &H : message time (HH:MM:SS) o &S : message subject o &F : sender name o && : character ‘&’ - Connection : Type of connection between the PC and the ASCOM system : o Direct connection if the ASCOM system is directly connected to the PC. o Modem connection, if the ASCOM system has to be called, through the phone network. - Modem parameters : This button gives access to the communication parameters setup when the connection type is modem.

Services configured : - Ascom Numeric. - Ascom Text-16. - Ascom 128. 4. Fax driver (v. 4.07)

Description : The Fax driver sends fax with either an analog modem or an ISDN modem.

Configuration options : - Internal fax (no prefix) : Check this option if the fax is located on the internal phone network. - Message header : This header (80 characters maximum) will be transmitted at the beginning of all the messages sent by the fax driver. It can include the following codes : o &T : Tabulation o &N : Go to next line o &U : Name of the called user - Fax identifier : Calling fax identifier (20 characters maximum). This identifier is used by the protocol to identify the calling fax on the display of the receiving fax machine and for the statistical reports. For compatibility with some fax, it is better to only use numeric characters (generally the phone number of the calling fax). - Page header : o Left part : This is the left part of the header text which will be printed on the top of each page. It can include the following codes : ƒ &D : Current date with the format "DD/MM " ƒ &H : Current hour with the format "HH:MM:SS" ƒ &I : Fax identifier fax (string set in the field "fax identifier") ƒ &P : Number of the current page ƒ && : Character "&" o Center part : This is the middle part of the header text (see Left part). o Right part : This is the right part of the header text (see Left part). - Logo (first page) : o Pathname of bitmap file : Name of the "bitmap" file which contains the logo to print on the first page of the fax. This logo is printed on the top of the first page, after the header line. The file name must contain the full path of the file if this last is not located in the current path of the application. If this field is empty, no logo will be printed. o Height (mm) : Height of the logo to print. This height is used to size the logo, proportionally to the original bitmap. o Position : Position of the logo on the page. - Fax parameters : o Class 2 : If this option is checked, the modem will be used in class 2, if this interface is available on the modem. If the "class 2" interface is not available, the modem will be used in class 1. If this option is not checked, the modem will be used in class 1. o Resolution fine (196 dpi) : Vertical resolution to use. The choice "Fine" corresponds to a vertical resolution of 196 points per inch. If this option is not checked, the normal resolution is used (98 points per inch). o Max baud rate : Selection of the baud rate used by the modem to transmit the fax (don't confuse with the baud rate used to communicate with the fax modem, defined in the communication parameters). The baud rate depends on the modulation supported by the fax modem used : ƒ - 2400 bits/s V27 ter ƒ - 4800 bits/s V27 ter ƒ - 9600 bits/s V29 or V17 ƒ - 14400 bits/s V33 or V17 5. ERMES/UCP driver (v. 2.9)

Description : ERMES is a pan-European wide area paging network working in Europe, the Middle East and Asia. It’s generally used to send SMS. This driver can be used with analog or ISDN data modems.

Configuration options : - Dial number : phone number used to call the server. - Address code originator : Dial number of the call originator (empty by default). - Authentication code originator : Authentication code of the call originator (empty by default). - Message header : header text that will be transmitted before each message. Can include the following codes : o &D : Message date (JJ/MM) o &H : Message time (HH:MM:SS) o &S : Message subject o &F : Message sender.

Services configured : - Proximus (Aldiscon) (Belgium) - Natel (Switzerland) - KPN Telecom (SMS GSM) (Netherlands) - TravelText (Netherlands) - D2-Mannesmann (Germany) - Mobistar (Belgium) - Movistar (Spain) - Comviq (Sweden) - Telia (Sweden) - Telecel (Portugal) - TMN (Portugal) - Telenor (Norway) - Tele Danmark 6. GSM driver (v. 2.3)

Description : This driver can send SMS (Short Message Service) over the GSM network. It requires a GSM modem.

Configuration options : - SMSC Dial number : phone number used to call the SMSC (Short Message Service Center). - Message header : header text that will be transmitted before each message. Can include the following codes : o &D : Message date (JJ/MM) o &H : Message time (HH:MM:SS) o &S : Message subject o &F : Message sender. - Character set : Character set used to code the message. o Default (7 bits) : 7 bits are used to code each character, the maximum length of the message is 160 characters. o UCS2 (16 bits) : Unicode, 16 bits are used to code each character, the maximum length of the message is 80 characters. Use this option for languages that requires Unicode like Chinese, Hebrew…

Services configured : A1 (Austria) max.mobil (Austria) SFR 900 (France) Aerial Comms (United Maxis (Malaysia) SingTel (Singapore) States) Microcell Telecom (United SMS – Israel (Israel) Airtel (Spain) States) Sonera (Finland) BellSouth (New Zealand) Mobile One (Singapore) Sonofon (Denmark) Bouygues (France) Mobistar (Belgium) Sprint (United States) Celcom (Malaysia) MTN (South Africa) Swisscom (Switzerland) CellNet (United Kingdom) Mutiara (Malaysia) Telcel (Portugal) Comviq (Sweden) Natel-D (Switzerland) TeleDanmark (Denmark) Connex (Romania) NetCom (Norway) Telefonica (Spain) D1 Telekom (Germany) North West (Russian Telekom (Finland) D2 Message Plus (Germany) Federation) TeleNor (Norway) D2 Privat (Germany) Omni (Italy) Telestet (Greece) Eircell (Ireland) Omnipoint (United States) Telia (Sweden) EMT (Estonia) Optus (Australia) Telkomsel (Indonesia) E-Plus (Germany) Orange (United Kingdom) Telstra (Australia) Era (Poland) OTE Hellas (Greece) TIM (Italy) Esat (Ireland) Pacific Bell (United States) TMN (Portugal) Europolitan (Sweden) Panafon (Greece) Turkcell (Turkey) Eurotel (Czech Republic) Pannon (Hungary) Vodacom (South Africa) Fido (Canada) Polkomtel (Poland) Vodafone (Australia) Globe (Philippines) Postur og Siminon (Iceland) Vodafone (United GSM-XL (Indonesia) Powertel (United States) Kingdom) HK Telecom (China) Proximus (Belgium) Voicestream (United States) Hutchinson (China) PTT-L (Luxembourg) Washington PCS (United Itineris 1800 (France) PTT-NL (Netherlands) States) Itineris 900 (France) Radiolinja (Finland) Westel900 (Hungary) Lebancell (Lebanon) Radiomobil (Czech Libertel (Netherlands) Republic) LMT (Latvia) Satelindo (Indonesia) 7. IAT driver (v. 1.2a)

Description : This driver can communicate with a server using IAT (Interactive Terminal) protocol to send messages to pagers. The messages can be alphanumeric, numeric or tone only. This driver can be used with analog or ISDN data modems.

Configuration options : - Dial number : phone number used to call the server. - Message header : header text that will be transmitted before each message. Can include the following codes : o &D : Message date (JJ/MM) o &H : Message time (HH:MM:SS) o &S : Message subject o &F : Message sender.

Services configured : - Belgacom Alpha (Belgium) - Belgacom Tone (Belgium) - SemaDigit 1 (Netherlands) - SemaDigit 2 (Netherlands) - SemaDigit 3 (Netherlands) - SemaDigit Benelux (Netherlands) - SemaScript 1 (Netherlands) - SemaScript 2 (Netherlands) - SemaScript 3 (Netherlands) - SemaScript Benelux (Netherlands) - SemaTone 1 (Netherlands) - SemaTone 2 (Netherlands) - SemaTone 3 (Netherlands) - SemaTone Benelux (Netherlands) - Belgacom Num (Belgium) 8. MAPI-Mail driver (v. 1.1)

Description : This driver uses the MAPI layer of Windows (Messaging Application Programming Interface) to send message to various messaging systems. To use this driver, the MAPI layer must be configured (Mail icon in configuration panel).

Configuration options : - Default sender : If the sender is not specified with the message, the default sender is used. - Default subject : If the subject is not specified with the message, the default subject is used.

MAPI options : - Profile : Choose the MAPI profile to use. - Available services : This list shows the transport service available in your system. 9. NetPrinter driver (v. 1.02)

Description : With this driver, you can print a message on a local or network printer.

Configuration : - List : First, you have to add in the list one or more printer. The name you choose for the printer is the address that you will enter for the message you send.. - RTF file path : Choose here a RTF file that will be used as a template to print the message. This RTF file can include the following fields : o &DATE& : Message date (JJ/MM) o &TIME& : Message time (HH:MM:SS) o &ALMESS& : Message text

10. Tele-Printer driver (v. 4.0)

Description : With this driver, you can print a message on a printer connected on a serial port or through a modem connection.

How to use this driver ? - Print attached file : This option allows printing the instruction file which can be associated with the message. This file is printed after the message, with an empty line between. - Message header : header text that will be printed before each message. Can include the following codes : o &D : Message date (JJ/MM) o &H : Message time (HH:MM:SS) o &S : Message subject o &F : Message sender o &R : Message receiver o &T : Tabulation o &N : Next Line. - Conversion (character set) : o No conversion : When this option is validated, characters are transmitted without conversion to the printer. The used character set is the ANSI 8 bits set of Windows. o Convert to OEM (PC437) : When this option is validated, characters are converted in PC437 character set (basic OEM character set used under DOS). o Convert to ANSI VT100 : When this option is validated, characters are converted in ANSI VT100 7 bits character set, using set commutation to display the special or accentuated characters. o Convert to uppercase : This option allows converting the characters to uppercase before transmission. - Columns : Select here the page width of the printer (80 or 132 characters).Messages having more characters than the selected page width are automatically overlapped onto the next line. - Connection : Type of connection between the PC and the printer : o Direct connection if connected by a direct line. o Modem connection, if the printer has to be called, through the phone network. - Modem parameters : This button gives access to the communication parameters setup when the connection type is modem.

11. Minitel driver (v. 4.2.1)

Description : This driver can communicate with a Minitel server to send messages to pagers. It is usually used to send SMS in France. This driver can be used with analog data modems.

Configuration options : - Dial number : phone number of the server. - Server code : Minitel service name - Message header : header text that will be transmitted before each message. Can include the following codes : o &D : Message date (JJ/MM) o &H : Message time (HH:MM:SS) o &S : Message subject o &F : Message sender.

Services configured : - Itineris MINI-MESSAGE (France) - SFR SMS (France) - Alphapage Minitel (France) - SMS Orange/SFR/Bouygues (France) - Itineris MEMOBIL (France) - Tatoo Text (France) 12. TAP driver (v. 4.7)

Description : This driver can communicate with a server using TAP (Telocator Alphanumeric Protocol) to send messages to pagers. This driver can be used with analog or ISDN data modems.

Configuration options : - Dial number : phone number used to call the server. - Password : some servers require a password - Message header : header text that will be transmitted before each message. Can include the following codes : o &D : Message date (JJ/MM) o &H : Message time (HH:MM:SS) o &S : Message subject o &F : Message sender. - Convert message to uppercase : This option allows converting the characters to uppercase before transmission. - Reverse message (Right to left reading) : This option allows reversing the message before the transmission for pagers that displays text from right to left.

Services configured : A1 SMS (Austria) One2one (United Kingdom) AirPage (Austria) Orange (United Kingdom) Airtouch (United States) Page New England (United States) Alphapage Num (France) PageMart (United States) Alphapage Text (France) PageNet (United States) Alphapage+ Num (France) PageOne DirectAccess (United Kingdom) Alphapage+ Text (France) PageOne DirectCall (United Kingdom) ATT Paging (United States) Sabafon (Yemen) ATT PCS (United States) Skytel (United States) ATT Wireless (United States) SpaceTel (Yemen) Beeper (Israel) Sprint PCS (United States) BT Paging (United Kingdom) Swissphone (Switzerland) CallMe (Austria) TamTam (France) Cellcom (Israel) Telecom Paging (New Zealand) Cellnet (United Kingdom) Telepage Business Alpha (Switzerland) Cellone (United States) Telepage Business Num (Switzerland) D1-AlphaService (Germany) Telepage Swiss Alpha (Switzerland) E-Plus SMS (Germany) Telepage Swiss Num (Switzerland) Esat Digifone (Ireland) TelMI (Germany) Expresso avec abonnement (France) TeLMI Fun (Germany) Expresso sans abonnement (France) TeLMI Pro (Germany) Hutchison Paging (United Kingdom) Telstra (Australia) Kobby (France) Telus (Canada) KPN Telecom tekst (Netherlands) Textnet (France) Landssimi Islands (TAP) (Iceland) USA Mobile (United States) Link (Australia) Verizon PCS (United States) Mensatel (Spain) VIAG Interkom (Germany) MetroCall (United States) Vodafone SMS (United Kingdom) Mobile Media (United States) Vodapage Mobile (United Kingdom) Mobilecomm (United States) Vodapage Num (United Kingdom) NexTel (United States) Vodapage Text(United Kingdom)

13. Text driver (v. 1.0)

Description : This driver can communicate with a server using simple text commands to send messages to pagers. This driver can be used with analog or ISDN data modems.

Configuration options : - Dial number : phone number used to call the server. - Message header : header text that will be transmitted before each message. Can include the following codes : o &D : Message date (JJ/MM) o &H : Message time (HH:MM:SS) o &S : Message subject o &F : Message sender.

Services configured : - Libertel (Netherlands) - Vodacom South Africa (South Africa) - Vodafone UK (United Kingdom) - Vodapage Premier (United Kingdom) 14. Vocal driver (v. 1.0)

Description : This driver makes it possible to perform interactive vocal calls. It works with a script that describes the behaviour of the vocal call with some simple instructions.

Configuration options : - Ignore dial prefix : Force dialling without prefix for internal numbers. - Let the script manage the call state : If this option is not checked, the call is considered as succeeded when the connection is established. If you check this option, you can control the call state (succeeded/failed) from within the script. - Perform one call for each message : If not checked, when several messages are sent to the same number, only one call is done, when the connection is established, the script can then give all the messages, but you can only acknowledge all the messages, not one by one. If this option is checked, one call will be performed for each message.