ref.: T4768 technical safety tieback anchors rev. no.: 1 date: 02/01 sheet page: 1/4 U- Safety Tieback Anchors Flashing & Sealing SAF0007A-SAF0016A Available The standard U-bar safety tieback anchors are the economical solution for securing secondary safety lifelines or for equipment tieback. All varieties of standard models are available for every mounting method.

All our anchors are designed to meet or exceed all applicable safety codes, regulations and standards where applicable, including FEDOSHA, CALOSHA, ASME/ANSI and CAN/CSA-Z91-M90.

5400 lbs. ULTIMATE LOAD ANY DIRECTION U-BAR - 3/4” DIA. STAINLESS STEEL TRS1800S & TRT1200S & TYPE-304 2 3/8” TRS2400S TRT1800S

GALVANIZED STEEL Tractel model TRS1800S & TRS2400S PIPE SUPPORT 4” DIA. 18” – TRS1800S U-Bar Safety Tieback Anchor, welded to or OPTIONAL RIGID 24” – TRS2400S wide beam. (/ bottom plate) INSULATION

ALL FLASHING AND materials: SEALING REQUIRED ‘U’ Bar: 3/4” dia. – type 304 stainless steel

FIELD WELD 5/16 Pipe Support: 4” dia. galvanized steel STRUCTURE TO WITHSTAND TOP OF BUILDING APPLIED LOADING BY OTHERS STRUCTURAL STEEL Notes: FIELD WELD E70XX ELECTRODE FINISH HOT DIP GALVANIZED

U-BAR - 3/4” DIA. 5400 lbs. ULTIMATE STAINLESS STEEL LOAD ANY DIRECTION TYPE-304 Tractel model TRT1200S & TRT1800S GALVANIZED STEEL 2 3/8” U-Bar Safety Tieback Anchor, bolted to PIPE SUPPORT 4” DIA. structure. OPTIONAL RIGID 12” – TRT1200S INSULATION or materials: 18” – TRT1800S ALL FLASHING AND SEALING REQUIRED ‘U’ Bar: 3/4” dia. – type 304 stainless steel

2 THREADED RODS Pipe Support: 4” dia galvanized steel CENTERED (3/4” UNC – SS304 THREADED ROD /W 3/4” UNC 4” MIN Base & Clamp Plate: galvanized steel (11” square base plate DOUBLE NUTS) 7” MAX & 11” 4” clamp plate)

STRUCTURE TO 5 1/4” MAX 2 Threaded Rods & Nuts: 3/4” UNC – SS304 thread rod c/w WITHSTAND APPLIED 2 1/4” MIN 3/4” UNC double nuts LOADING BY OTHERS 8” Note: finish hot dip galvanized 11” ref.: T4768 technical safety tieback anchors rev. no.: 1 date: 02/01 sheet page: 2/4

U-bar Safety Tieback Anchors Flashing & Sealing SAF0007A-SAF0016A The standard U-bar safety tieback anchors are the Available economical solution for securing secondary safety lifelines or for equipment tieback. All varieties of standard models are available for every mounting method.

All our anchors are designed to meet or exceed all applicable safety codes, regulations and standards where applicable, including FEDOSHA, CALOSHA, ASME/ANSI and CAN/CSA-Z91-M90.

5400 lbs. ULTIMATE U-BAR - 3/4” DIA. STAINLESS LOAD ANY DIRECTION STEEL TYPE-304 TRE1200S & TRM1200S & GALVANIZED STEEL PIPE 2 3/8” SUPPORT 4” DIA. TRE1800S TRM1800S

OPTIONAL RIGID INSULATION Tractel model TRE1200S & TRE1800S 12” – TRE1200S FLASHING AND SEALING or 18” – TRE1800S U-Bar Safety Tieback Anchor, embedded REQUIRED anchor bolt into concrete. SINGLE U-ANCHOR BOLT CENTERED (3/4” UNC – materials: SS304 THREADED ROD C/W DOUBLE NUTS ‘U’ Bar: 3/4” dia. – type 304 stainless steel

STRUCTURE TO Pipe Support: 4” dia. galvanized steel

WITHSTAND APPLIED 5” 6” MIN LOADING BY OTHERS Base Plate: 11” square galvanized steel 8” U-Anchor Rod & Nuts: 3/4” UNC – SS304 thread rod c/w 11” SQ 3/4” UNC double nuts 5400 lbs. ULTIMATE U-BAR - 3/4” DIA. STAINLESS Note: Finish hot dip galvanized STEEL TYPE-304 LOAD ANY DIRECTION

GALVANIZED STEEL PIPE Tractel model TRM1200S & TRM1800S SUPPORT 4” DIA. 2 3/8”

OPTIONAL RIGID U-Bar Safety Tieback Anchor, adhesive INSULATION anchor into concrete. 12” – TRM1200S FLASHING AND SEALING or REQUIRED 18” – TRM1800S materials:

4 ADHESIVE ANCHORS ‘U’ Bar: 3/4” dia. – type 304 stainless steel (HVA M20X240) CENTERED (M20 – SS304 THREADED Pipe Support: 4” dia. galvanized steel ROD C/W M20 DOUBLE NUTS) Base Plate: 11” square galvanized steel STRUCTURE TO Adhesive Anchor & Nuts: M20x240 – SS304 threaded rod

WITHSTAND APPLIED 6 11/16” 8” MIN LOADING BY OTHERS c/w M20 double nuts (Available) Note: Pull test all adhesive anchors to 4000lbs by others 8” Finish hot dip galvanized 11” SQ ref.: T4768 technical safety tieback anchors rev. no.: 1 date: 02/01 sheet wall mounted models page: 3/4

Wall Mounted Safety Tieback Anchors

When tiebacks are required on roofs where waterproofing or flashing is not an option, Tractel’ wall mounted tiebacks provide a simple, inexpensive solution.

All varieties of standard models are available for every mounting method, including new or retrofit applications.

Like all Tractel tiebacks, they are load rated at 5400 lbs. in any direction, and meet or exceed all required safety codes.

TWE1000S TWT1000S ALL FLASHING AND SEALING 6” MIN BY OTHERS 3” 5” Tractel model TWE1000S GALVANIZED STEEL PLATE Wall mounted safety tieback anchor, embedded in concrete. U-BAR - 3/4” DIA. STAINLESS STEEL TYPE 304 materials: 5400 lbs. ULTIMATE “U”- Bar: 3/4” dia. – type 304 stainless steel 8” LOAD ANY DIRECTION Top Plate: Galvanized steel - 11” x 5” SINGLE U-ANCHOR 2 3/8” BOLT CENTRED (3/4” UNC – SS304 THREADED ROD C/W 3/4” “U”- Anchor & Nuts: 3/4” UNC – SS304 threaded rod c/w UNC DOUBLE NUTS 1 1/2” 3/4” UNC double nuts

STRUCTURE TO WITHSTAND APPLIED LOADING BY OTHERS Note: Finish hot dip galvanized

ALL FLASHING AND SEALING Tractel model TWT1000S 2 3/4” 4” MIN 2 1/4” MIN BY OTHERS 7” MAX 5 1/4” MAX

GALVANIZED STEEL PLATE Masonry wall mounted safety tieback anchor, bolted to structure. U-BAR - 3/4” DIA. STAINLESS STEEL TYPE 304 materials: “U”- Bar: 3/4” dia. – type 304 stainless steel 5400 lbs. ULTIMATE LOAD ANY DIRECTION 8” Top Plate: Galvanized steel - 11” x 5” 2 3/8” TWO THREADED RODS Two Threaded Rods & Nuts: 3/4” UNC – SS304 threaded CENTRED (3/4” UNC – SS304 rod c/w 3/4” UNC double nuts THREADED ROD C/W DOUBLE 1 1/2” NUTS Note: Finish hot dip galvanized STRUCTURE TO WITHSTAND APPLIED LOADING BY OTHERS ref.: T4768 technical safety tieback anchors rev. no.: 1 date: 02/01 sheet wall mounted models page: 4/4

Wall Mounted Safety Tieback Anchors

When tiebacks are required on roofs where waterproofing or flashing is not an option, Tractel’s wall mounted tiebacks provide a simple, inexpensive solution.

All varieties of standard models are available for every mounting method, including new or retrofit applications.

Like all Tractel tiebacks, they are load rated at 5400 lbs. in any direction, and meet or exceed all required safety codes. TWM1000S TWC1000S ALL FLASHING AND SEALING BY OTHERS Tractel model TWM1000S GALVANIZED STEEL PLATE Wall mounted safety tieback anchor, 1 1/2” U-BAR - 3/4” DIA. STAINLESS adhesive anchor into concrete. STEEL TYPE 304 2 3/8” materials: 5400 lbs. ULTIMATE 8” LOAD ANY DIRECTION “U”- Bar: 3/4” dia. – type 304 stainless steel

Top Plate: Galvanized steel - 11” x 11” FOUR ADHESIVE ANCHORS (HVA M20x240) CENTRED (3/4” UNC – SS304 THREADED RODS C/W Adhesive Anchors & Nuts: Four adhesive anchors (hva DOUBLE NUTS m20x240) centred, two 3/4” unc – ss304 threaded rods c/w double nuts (Available)

STRUCTURE TO WITHSTAND 2 3/4” APPLIED LOADING BY OTHERS 6 11/16” Notes: Pull test all adhesive anchors to 4000 lbs. by others 8” MIN Finish hot dip galvanized

GALVANIZED STEEL PLATE Tractel model TWC1000S 1 1/2” U-BAR - 3/4” DIA. STAINLESS Wall mounted safety tieback only, mounting STEEL TYPE 304 2 3/8” method by others. 5400 lbs. ULTIMATE 8” LOAD ANY DIRECTION materials: “U”- Bar: 3/4” dia. – type 304 stainless steel ALL FLASHING AND SEALING BY OTHERS Top Plate: Galvanized steel - 11” x 5”

STRUCTURE TO WITHSTAND Notes: Mounting method by others, Tractel not responsible for APPLIED LOADING BY OTHERS 2 3/4” incorrect installation. Finish hot dip galvanized