Dupont™ Harmony® SG Herbicide (With Totalsol® Soluble Granules)

H -

DuPont™ Harmony® SG herbicide (with TotalSol® soluble granules)

“...... A Growing Partnership With Nature” DUPONT™ HARMONY® SG HERBICIDE (WITH TABLE OF CONTENTS TOTALSOL® SOLUBLE GRANULES) HIGHLIGHTS PRECAUTIONARY STATEMENTS ...... 1 GENERAL INFORMATION ...... 2 • May be applied by ground or by air. DIRECTIONS FOR USE ...... 2 • Wheat, Barley, Oat, Triticale, Soybeans and Field Corn may be replanted anytime after the application of CEREALS HARMONY® SG. Any other crop may be planted 45 Application Timing ...... 3 days after the application of HARMONY® SG. Use Rate ...... 3 • Certain environmental conditions, such as cool and dry, Spray Additives ...... 4 or hot and humid weather, affect the performance of Weeds Controlled ...... 4 HARMONY® SG. (See Environmental Conditions.) Specific Weed Problems ...... 4 • Consult label text for complete instructions. Always read Tank Mixtures ...... 5 and follow label directions for use. SOYBEANS Cereals Application Timing ...... 7 • For selective postemergence broadleaf weed control in Use Rate ...... 7 Wheat (including Durum wheat), Barley, Oat, Triticale, Spray Additives ...... 7 post-harvest burndown, pre-plant burndown and Fallow. Cultivation ...... 7 • Apply at the rate of 0.45 to 0.9 ounce per acre on Wheat, Barley, Triticale, post-harvest burndown, pre-plant Weeds Controlled ...... 7 burndown and Fallow; 0.45 to 0.6 ounce per acre on Oat Tank Mixtures ...... 7 (see Cereals Application Information). GENERAL USE AND APPLICATION • Apply after the crop is in the 2-leaf stage, but before the DIRECTIONS - ALL CROPS flag leaf is visible on Wheat, Barley, Triticale and Ground Application ...... 9 Winter Oat. On Spring Oat, apply after the crop is in the Aerial Application ...... 10 3-leaf stage, but before jointing. Crop Rotation ...... 10 • Use in tank mixtures with other registered herbicides for Grazing ...... 10 broader spectrum weed control (see Cereals Tank Mixtures). Mixing Instructions...... 10 Soybeans Spray Equipment ...... 10 SPRAYER CLEANUP ...... 10 • For selective postemergence broadleaf weed control in soybeans. At the End of the Day ...... 10 • Apply at the rate of 0.125 (1/8) ounce per acre. After Spraying HARMONY® SG and before Spraying Crops Other Than Wheat, • Include a spray additive recommended in this label. (See Barley, Oat, Triticale and Soybeans ...... 10 Soybeans Spray Additives) SPRAY DRIFT MANAGEMENT ...... 11 • Include a nitrogen fertilizer (example: 4-8 pints of 28-0- 0). (See Soybeans Spray Additives.) Importance of Droplet Size ...... 11 Controlling Droplet Size - General Techniques ...... 11 • For ground application to optimize HARMONY® SG performance, use flat fan nozzles and apply in 10-25 Controlling Droplet Size - Aircraft ...... 11 gallons of water at 25-60 psi. Boom Height ...... 11 • Apply to actively growing weeds at the recommended Wind ...... 11 sizes. (See Soybeans Weeds Controlled.) Temperature and Humidity ...... 11 • Tank mix only with pesticides specified by this or other Temperature Inversions ...... 11 supplemental labeling. (See Soybeans Tank Mix Shielded Sprayers ...... 12 Applications.) Air-Assisted (Air Blast) Field Crop Sprayers ...... 12 WEED RESISTANCE ...... 12 INTEGRATED PEST MANAGEMENT ...... 12 PRECAUTIONS ...... 12 STORAGE AND DISPOSAL ...... 13 NOTICE OF WARRANTY...... 14 ™ KEEP OUT OF REACH OF CHILDREN DuPont CAUTION ® Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand Harmony SG this label, find someone to explain it to you in detail.) FIRST AID herbicide (with TotalSol® If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call soluble granules) a poison control center or doctor for treatment advice. Have the product container or label with you when calling a poison Soluble Granule control center or doctor, or going for treatment. For Use on Wheat, Barley, Oat, Triticale, You may also contact 1-800-441-3637 for emergency medical treatment information. Fallow, Soybeans, and as a Pre-plant or Post-harvest Burndown Herbicide PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS Active Ingredient By Weight Caution! Avoid contact with eyes, skin, or clothing. Wash Thifensulfuron-methyl thoroughly with soap and water after handling. Methyl 3-[[[[(4-methoxy-6-methyl-1,3,5- triazin-2-yl) amino]carbonyl]amino] PERSONAL PROTECTIVE EQUIPMENT sulfonyl]-2-thiophenecarboxylate 50% Some of the materials that are chemical-resistant to this product are listed below. If you want more options, follow Inert Ingredients 50% the instructions for Category A on an EPA chemical- TOTAL 100% resistance category selection chart. Applicators and other handlers must wear: Long-sleeved shirt and long pants. EPA Reg. No. 352-633 Chemical resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride. Shoes plus socks. EPA Est. No. ______Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other Net Contents: ______laundry. Engineering Control Statement: When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. Important: When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE specified above for “Applicators and Other Handlers” and have such PPE immediately available for use in an emergency, such as a spill or equipment breakdown. USER SAFETY RECOMMENDATIONS USERS SHOULD: Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.

ENVIRONMENTAL HAZARDS Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not contaminate water when cleaning equipment or disposing of equipment washwaters. Do not apply where/when conditions favor runoff.

1 PESTICIDE HANDLING In Cereals, to reduce the potential of crop injury, tank mix • Calibrate sprayers only with clean water away from the well HARMONY® SG with 2,4-D (ester formulations perform site. best–see the "TANK MIXTURES" section of this label) and apply after the crop is in the tillering stage of growth. • Make scheduled checks of spray equipment. Weed control may be reduced if rainfall or snowfall occurs • Assure accurate measurement of pesticides by all operation soon after application. Several hours of dry weather are employees. needed to allow HARMONY® SG to be sufficiently • Mix only enough product for the job at hand. absorbed by weed foliage. • Avoid over-filling of spray tank. DIRECTIONS FOR USE • Do not discharge excess material on the soil at a single spot in the field/grove or mixing/loading station. It is a violation of Federal law to use this product in a manner inconsistent with its labeling. • Dilute and agitate excess solution and apply at labeled rates/uses. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected • Avoid storage of pesticides near well sites. handlers may be in the area during application. For any • When triple rinsing the pesticide container, be sure to add the requirements specific to your State or Tribe, consult the agency rinsate to the spray mix. responsible for pesticide regulation. GENERAL INFORMATION AGRICULTURAL USE REQUIREMENTS DuPont™ HARMONY® SG herbicide (with TotalSol® soluble granules) may be used for selective postemergence control of Use this product only in accordance with its labeling and certain broadleaf weeds in wheat (including durum), barley, oat, with the Worker Protection Standard, 40 CFR part 170. triticale, post-harvest burndown, pre-plant burndown, fallow and This Standard contains requirements for the protection of soybeans. HARMONY® SG is a soluble granule to be mixed in agricultural workers on farms, forests, nurseries, and water or other recommended carrier and applied as a uniform greenhouses, and handlers of agricultural pesticides. It broadcast spray. It is noncorrosive, nonflammable, nonvolatile contains requirements for training, decontamination, and does not freeze. notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the BIOLOGICAL ACTIVITY AND statements on this label about personal protective ENVIRONMENTAL CONDITIONS equipment(PPE) and restricted-entry interval. The Best results are obtained when HARMONY® SG is applied requirements in this box only apply to uses of this product to young, actively growing weeds. The use rate will depend that are covered by the Worker Protection Standard. Do not on weed spectrum and size of weed at time of application. enter or allow worker entry into treated areas during the The degree of control and duration of effect are dependent restricted entry interval (REI) of 4 hours. on rate used, sensitivity and size of target weed and PPE required for early entry to treated areas that is environmental conditions at the time of and following permitted under the Worker Protection Standard and that application. HARMONY® SG stops growth of susceptible involves contact with anything that has been treated, such weeds rapidly. However, typical symptoms of dying weeds as plants, soil, or water, is: (discoloration) may not be noticeable for 1-3 weeks after Coveralls. application (2-5 weeks for wild garlic) depending on the Chemical -resistant gloves made of any waterproof environmental conditions and weed susceptibility. Warm, material. moist conditions following treatment promote the activity of Shoes plus socks. HARMONY® SG, while cold, dry conditions delay the activity. Weeds hardened-off by cold weather or drought Do not apply this product through any type of irrigation system. stress will be less susceptible. HARMONY® SG herbicide should be used only in accordance A vigorous growing crop will aid weed control by shading with instructions on this label or in separately published DuPont and providing competition for weeds. However, a dense instructions. crop canopy at time of application can intercept spray and DuPont will not be responsible for losses or damages resulting result in reduced weed control. Weeds may not be from the use of this product in any manner not specified by adequately controlled in areas of thin crop stand or seeding DuPont. skips. HARMONY® SG is for use on wheat, barley, oat, triticale, Applications made to weeds that are in the cotyledon stage, fallow, soybeans and as a pre-plant and/or post-harvest larger than the size indicated, or to weeds under stress may burndown herbicide in most states. Check with your state result in unsatisfactory control. extension service or Department of Agriculture before use to be HARMONY® SG may injure crops that are stressed from certain HARMONY® SG is registered in your state. adverse environmental conditions (such as extreme temperatures or moisture), abnormal soil conditions, or cultural practices. In addition, different varieties of the crop may have differing levels of sensitivity to treatment with HARMONY® SG under otherwise normal conditions. Treatment of sensitive crop varieties may injure crops.

2 CEREALS Oat (Spring and Winter) Apply 0.45 to 0.6 ounce HARMONY® SG per acre for APPLICATION TIMING control of the weeds listed in WEEDS CONTROLLED Wheat (Including Durum), Barley, Triticale and Winter Oat table. Make applications after the crop is in the 2-leaf stage, but before If predominant weed(s) in field is(are) one of those listed in the flag leaf is visible. WEEDS PARTIALLY CONTROLLED table below, Spring Oat always include a tank mix partner (refer to TANK MIXTURES). Make applications after the crop is in the 3-leaf stage, but before jointing. Do not use on "Ogle", "Porter" or "Premier" varieties Do not make more than one application of HARMONY® since crop injury can occur. SG per crop season on oat. Fallow Fallow Apply DuPont™ HARMONY® SG herbicide (with TotalSol® HARMONY® SG may be used as a postemergence fallow soluble granules) in the spring or fall when the majority of treatment, in combination with other suitable registered weeds have emerged and are actively growing. (See the "CROP fallow herbicides (See the "TANK MIXTURES" section of ROTATION" section of this label for additional information). this label for additional information). Apply HARMONY® Pre-Plant Burndown SG at 0.45 to 0.9 ounce per acre to fallow for control or partial control of the weeds listed below. Sequential For burndown of emerged weeds, broadcast applications of treatments of HARMONY® SG may be made provided the HARMONY® SG may be applied up through planting, but total amount of HARMONY® SG applied to the crop does before wheat (including durum), barley, oat, triticale, soybeans not exceed 1.5 ounce per acre. and field corn plants emerge. Apply HARMONY® SG as a burndown treatment before planting any other crop (such as Pre-Plant Burndown sugarbeets, canola, cotton, rice, or grain sorghum) at least 45 HARMONY® SG may be used as a burndown treatment days prior to planting. (See the "CROP ROTATION" section of prior to planting any crop; or shortly after planting, but prior this label for additional information). to emergence of, wheat (including durum), barley, oat, Post Harvest triticale, soybeans and field corn. (See the "APPLICATION TIMING" section of this label for restriction on planting HARMONY® SG may be used as a burndown treatment to intervals.) crop stubble when the majority of weeds have emerged and are actively growing. (See the "CROP ROTATION" section of this Apply HARMONY® SG at 0.45 to 0.9 ounce per acre for label for additional information). control or partial control of the weeds listed below. Use 0.9 ounce per acre rate when weed infestation is heavy and USE RATES predominantly consists of those weeds listed under the In cereals, do not use less than 0.45 ounce HARMONY® "WEEDS PARTIALLY CONTROLLED" section of this SG per acre. label, or when application timing and environmental If predominant weed(s) in field is (are) one of those listed in conditions are marginal. Sequential treatments of WEEDS PARTIALLY CONTROLLED table below, HARMONY® SG may also be made provided the total always include a tank mix partner (refer to TANK amount of HARMONY® SG applied during one fallow/pre- MIXTURES). plant season does not exceed 1.5 ounce per acre. Wheat, Barley and Triticale DuPont HARMONY® SG should be applied in combination with other suitable registered pre-plant Apply 0.75 ounce HARMONY® SG herbicide per acre to burndown herbicides (See the "TANK MIXTURES" section wheat (including durum), barley or triticale for control or of this label for additional information.) partial control of the weeds listed below. Post Harvest Use 0.9 ounce HARMONY® SG per acre when weed infestation is heavy and predominately consists of those Apply HARMONY® SG at 0.45 to 0.9 ounce per acre to weeds listed under partial control, or when application crop stubble after harvest. Use the 0.9 ounce per acre rate timing and environmental conditions are marginal (refer to when weed infestation is heavy and predominantly consists the "APPLICATION TIMING" and "GENERAL of those weeds listed under the "WEEDS PARTIALLY INFORMATION" sections of this label). CONTROLLED" section of this label or when application timing and environmental conditions are marginal. (See the Use 0.45 ounce HARMONY® SG per acre when weed "APPLICATION TIMING" section of this label for infestation is light and predominately consists of those restriction on planting intervals). HARMONY® SG should weeds listed under weeds controlled, and when optimum be applied in combination with other suitable registered application conditions occur. burndown herbicides (See the "TANK MIXTURES" section Sequential treatments of HARMONY® SG may be made of this label for additional information). provided the total amount of HARMONY® SG applied to the crop does not exceed 1.5 ounce per acre.

3 Sequential treatments of DuPont™ HARMONY® SG CEREALS AND FALLOW herbicide (with TotalSol® soluble granules) may also be made provided the total amount of HARMONY® SG WEEDS CONTROLLED applied during one fallow/pre plant cropland season does not exceed 1.5 ounce per acre. Annual knawel Miners lettuce Annual sowthistle Mouseear chickweed SPRAY ADJUVANTS Black mustard Pennsylvania smartweed Include a spray adjuvant with applications of HARMONY® Bushy wallflower Prostrate knotweed SG. An ammonium nitrogen fertilizer may also be used. Do /Treacle mustard Redmaids Carolina geranium Redroot pigweed not use low rates of liquid nitrogen fertilizer solution as a Coast fiddleneck Russian thistle*† substitute for surfactant. Antifoaming agents may be used if Common buckwheat Scentless needed. Common chickweed* chamomile/mayweed Consult your Ag dealer or applicator, local DuPont fact Common groundsel Shepherd’s-purse sheets and technical bulletins prior to using an adjuvant Common lambsquarters Smallflower buttercup Corn chamomile Stinking mayweed system. If another herbicide is tank mixed with Corn spurry /Dogfennel HARMONY® SG, select adjuvants authorized for use with Cress (mouse-ear) Swinecress both products. Products must contain only EPA-exempt Curly dock Tarweed fiddleneck ingredients (40 CFR 1001). False chamomile Tumble/Jim Hill mustard Nonionic Surfactant (NIS) Field pennycress Volunteer lentils Flixweed Volunteer peas • Apply 0.25 to 0.50% volume/volume (2 pt to 4 pt per 100 Green smartweed Volunteer sunflower* gal of spray solution). Kochia *† Wild buckwheat* • Surfactant products must contain at least 60% nonionic Ladysthumb Wild chamomile London rocket Wild garlic* surfactant with a hydrophilic/lipophilic balance (HLB) Mallow (little) Wild mustard greater than 12. – See the "TANK MIXTURES" section Marshelder of this label for additional information. Crop Oil Concentrate (COC) - Petroleum or Modified PARTIAL CONTROL** Seed Oil (MSO) • Apply at 1% v/v (1 gal per 100 gal spray solution) or 2% Common cocklebur Mallow (common) Common sunflower* Prickly lettuce*† under arid conditions. MSO adjuvants may be used at Cutleaf eveningprimrose Tansymustard* 0.5% v/v if specified on local DuPont product literature Henbit Wild radish* or service policies. • Oil adjuvants must contain at least 80% high quality, * See SPECIFIC WEED PROBLEMS for more information. petroleum (mineral) or modified vegetable seed oil with **Partial control: A visual reduction of weed population as well as at least 15% surfactant emulsifiers. a significant loss of vigor for individual weed plants. For better results, use 0.75 or 0.9 ounce HARMONY® SG per acre and Special Adjuvant Types include a tank mix partner such as 2,4-D, MCP, bromoxynil • Combination adjuvant products may be used at doses that (such as "Buctril", "Bison", "Bronate" or "Bronate Advanced") , provide the required amount of NIS, COC, MSO and/or or dicamba (such as "Banvel"/ "Clarity"), refer to the "TANK ammonium nitrogen fertilizer. Consult product literature MIXTURES" section of this label. for use rates and restrictions. † Naturally occurring resistant biotypes of kochia, prickly lettuce • In addition to the adjuvants specified above, other and Russian thistle are known to occur. See the "TANK MIXTURES" and "SPECIFIC WEED PROBLEMS" sections of adjuvant types may be used if they provide the same this label for additional details. functionality and have been evaluated and approved by DuPont product management. Consult separate DuPont SPECIFIC WEED PROBLEMS technical bulletins for detailed information before using Common chickweed and wild buckwheat: For best results, adjuvant types not specified on this label. apply a minimum of 0.75 ounce HARMONY® SG per acre Ammonium Nitrogen Fertilizer plus surfactant when all or the majority of weeds have germinated and are past the cotyledon stage. Weeds should • Use 2 qt/acre of a high-quality urea ammonium nitrate be less than 3 inches tall or across at the time of (UAN), such as 28%N or 32%N, or 2 lb/acre of a spray- HARMONY® SG application. grade ammonium sulfate (AMS). Use 4 qt/acre UAN or 4 lb/acre AMS under arid conditions. Kochia: Naturally occurring biotypes resistant to HARMONY® SG are known to occur. For best results, use HARMONY® SG in a tank mix with Starane, Starane + Salvo, Starane + Sword, dicamba (such as "Banvel"/ "Clarity") and 2,4-D or MCP (ester or amine), or bromoxynil containing products (such as "Buctril", "Bison", "Bronate" or "Bronate Advanced"). HARMONY® SG should be applied in the spring when kochia are less than 2" tall and are actively growing (refer to

4 the "TANK MIXTURES" section of this label for additional With 2,4-D (amine or ester) or MCP (amine or ester) details on rates and restrictions). HARMONY® SG may be tank mixed with the amine and ester Russian thistle, Prickly lettuce: Naturally occurring formulations of 2,4-D and MCP herbicides for use on wheat, biotypes resistant to DuPont™ HARMONY® SG herbicide barley, oat, or fallow. (with TotalSol® soluble granules) of these weeds are known For best results in the Red River Valley and adjacent areas of to occur. For best results, use HARMONY® SG in a tank North Dakota and Minnesota, add the ester formulations of 2,4- mix with dicamba (such as "Banvel"/ "Clarity") and 2,4-D D or MCP herbicides to the tank at 3/8 lb active ingredient (such or MCP (ester or amine), or bromoxynil containing products as 3/4 pint of a 4 lb/gal product, 1/2 pint of a 6 lb/gal product). (such as "Buctril", "Bison", "Bronate" or "Bronate No additional surfactant is needed with this mixture. Advanced"). For best results, in other areas, add the ester formulations of 2,4- HARMONY® SG should be applied in the spring when D or MCP herbicides to the tank at 1/4 to 3/8 lb active Russian thistle, and prickly lettuce are less than 2" tall or 2" ingredient (such as 1/2-3/4 pint of a 4 lb/gal product, 1/3-1/2 across and are actively growing (refer to the "TANK pint of a 6 lb/gal product). Nonionic surfactant may be added to MIXTURES" section of this label for additional details on the mixture at 1/2 to 1 quart per 100 gal of spray solution (0.125 rates and restrictions). to 0.25% v/v); however, adding nonionic surfactant may Wild garlic: For best results, apply 0.75 to 0.9 ounce increase the potential for crop injury, especially at the higher HARMONY® SG per acre plus surfactant when wild garlic phenoxy rates. Higher rates of 2,4-D or MCP may be used, but plants are less than 12 inches tall with 2 to 4 inches of new do not exceed the highest rate allowed by those respective growth. For severe infestations, use the 0.9 ounce per acre labels. rate of HARMONY® SG. Control may be reduced when With dicamba (such as "Banvel"/"Banvel" SGF/"Clarity") plants are hardened-off by cold weather and/or drought HARMONY® SG may be tank mixed with 1/16 to 1/8 lb active stress. Control is enhanced when applications are made ingredient dicamba (such as 2-4 fluid ounce "Banvel", 4-8 fluid during warm temperatures to actively growing wild garlic ounce "Banvel" SGF, 2-4 fluid ounce "Clarity"). Use higher plants. Typical symptoms of dying wild garlic plants rates when weed infestation is heavy. Nonionic surfactant may (discoloration and collapse) may not be noticeable for 2-5 be added to the mixture at 1/2 to 1 quart per 100 gal of spray weeks. solution (0.125 to 0.25% v/v); however, adding nonionic Thorough coverage of all garlic plants is essential. Tank surfactant may increase the potential for crop injury. Refer to the mixes of HARMONY® SG plus metribuzin may result in specific dicamba label for application timing and restrictions. reduced control of wild garlic. Tank mixes of HARMONY® SG plus dicamba may result in Wild radish: For best results, apply 0.75 to 0.9 ounce reduced control of some broadleaf weeds. HARMONY® SG per acre plus surfactant either in the fall With 2,4-D or MCP (amine or ester) and "Banvel"/"Clarity" or spring to wild radish rosettes less than 6 inches in HARMONY® SG may be applied in a 3-way tank mix with diameter. Applications made later than 30 days after weed formulations of dicamba and 2,4-D or MCP. Make application emergence will result in partial control. Fall applications of HARMONY® SG plus 1/16 to 1/8 lb active ingredient should be made prior to hardening-off of plants. dicamba (such as 2-4 fluid ounce "Banvel", 4-8 fluid ounce SU/IMI Tolerant Volunteer Sunflowers: Control may not "Banvel" SGF, 2-4 fluid ounce "Clarity") plus 1/4-3/8 lb active be adequate because varieties resistant to SU and IMI ingredient 2,4-D or MCP ester or amine per acre. Use higher products (like DuPont™ EXPRESS®, "Beyond", "Pursuit", rates when weed infestation is heavy. Nonionic surfactant may "Raptor") are under development. For best results, use be added to the mixture at 1/2 to 1 quart per 100 gal of spray HARMONY® SG in a tank mix with Starane, Starane + solution (0.125 to 0.25% v/v); however, adding nonionic Salvo, Starane + Sword, dicamba (such as "Banvel"/ surfactant may increase the potential for crop injury. Apply this "Clarity") and 2,4-D or MCP (ester or amine), or three-way combination to winter wheat and winter oat after the bromoxynil containing products (such as "Buctril", "Bison", crop is tillering and prior to jointing (first node). "Bronate" or "Bronate Advanced"). In Spring Wheat (including Durum) and Spring Oat, apply after TANK MIXTURES the crop is tillering and before it exceeds the 5-leaf stage. Read and follow all manufacturers’ label instructions for any In Spring Barley, apply after the crop is tillering and before it companion herbicides, fungicides, and/or insecticides. If those exceeds the 4-leaf stage. instructions conflict with this label, do not tank mix that product With Bromoxynil containing products (such as "Buctril", with HARMONY® SG. Read and follow all label instructions "Bison", "Bronate" or "Bronate Advanced") on timing, precautions, and warnings for any companion products before using these tank mixtures. Follow the most HARMONY® SG may be tank mixed with bromoxynil restrictive labeling. containing herbicides registered for use on wheat, barley or triticale. For best results, add bromoxynil containing herbicides Wheat, Barley and Triticale to the tank at 3 to 6 oz active ingredient per acre (such as In cereals HARMONY® SG may be tank mixed with other "Bronate" or "Bison" at 3/4 - 1 1/2 pt per acre). Tank mixes of suitable registered herbicides to control weeds listed as partially HARMONY® SG plus bromoxynil may result in reduced controlled, weeds resistant to HARMONY® SG or weeds not control of Canada thistle. listed under the "WEEDS CONTROLLED" sections of this label.

5 With "Starane", "Starane + Salvo", "Starane + Sword" herbicide in winter wheat (up to 0.6 ounce per acre in spring For improved control of Kochia (2-4" tall) DuPont™ wheat and spring barley). "Buctril" herbicide should be used at 1 HARMONY® SG herbicide (with TotalSol® soluble pint per acre. granules) may be tank mixed with 1/3 to 2/3 pints per acre of This tank mixture should only be used under good soil moisture Starane, 2/3 to 1 1/3 pints per acre of Starane + Salvo, 3/4 to 1 conditions when wild oats are in the 1 to 4 leaf stage. Reduced 1/2 pints per acre of Starane + Sword. control of foxtail is likely when tank mixing "Hoelon" with 2,4-D and MCP herbicides (preferably ester formulations) may HARMONY® SG herbicide. When foxtail is the major grassy be tank mixed with HARMONY® SG plus Starane. Consult weed in the field, DO NOT tank mix "Hoelon" 3EC herbicide + local guidance and the "TANK MIXTURES" section of this HARMONY® SG herbicide - Use sequential treatments. label for additional information. With "Achieve" With "Maverick" HARMONY® SG can be tankmixed with "Achieve" for wild HARMONY® SG can be tank mixed with "Maverick" oat control. This tankmix may also include 2,4-D ester, MCP herbicide for improved control of weeds in wheat. ester, bromoxynil or bromoxynil/MCP for greater spectrum of broadleaf control - see "Achieve" label for specific use With "Aim" directions and restrictions on tank mixes. HARMONY® SG can be tank mixed with "Aim" herbicide for To minimize the reduction in wild oat control, use the higher improved control of weeds in wheat and barley. rates of "Achieve" when using rates of HARMONY® SG With "Stinger" or "Curtail" or "Curtail M" greater than 0.45 ounce per acre. HARMONY® SG can be tank mixed with "Stinger" or Note: Green foxtail, yellow foxtail, Persian darnel and other “Curtail” or “Curtail M” herbicide for improved control of grass weeds will not be controlled by this tankmix. weeds in wheat and barley. With "Puma" With DuPont™ EXPRESS® or EXPRESS® XP Herbicide HARMONY® SG herbicide can be tankmixed with "Puma" HARMONY® SG may be tank mixed with EXPRESS® or 1EC for control of some annual grass weeds. This tankmix may EXPRESS® XP based on local guidance. also include MCP ester, bromoxynil or bromoxynil/MCP, Starane, Starane + Sword for greater spectrum of broadleaf With DuPont™ ALLY® or ALLY® XP Herbicide control - see "Puma" 1EC label for specific use directions and HARMONY® SG may be tank mixed with ALLY®or restrictions on tank mixes. ALLY® XP based on local guidance. With "Tiller" With "Assert" Herbicide or "Avenge" Herbicide HARMONY® SG can be tankmixed with "Tiller" for green HARMONY® SG can be tank mixed with "Avenge" or foxtail, foxtail millets and volunteer corn control. "Assert". When tank mixing HARMONY® SG with "Assert", With Other Grass Control Products always include another broadleaf weed herbicide with a different mode of action (for example 2,4-D ester, MCP ester, or HARMONY® SG can be tankmixed with grass control bromoxynil (such as "Buctril", "Bison", "Bronate" or "Bronate products. Antagonism generally does not occur. However, Advanced"). Applications of HARMONY® SG plus "Assert" DuPont recommends that you first consult your state experiment may cause temporary crop discoloration, stunting, or injury station, university, or extension agent, Agricultural dealer, or when heavy rainfall occurs shortly after application. DuPont representative as to the potential for antagonism before using the mixture. If no information is available, limit the initial With "Discover" use of HARMONY® SG and the grass product to a small area. HARMONY® SG can be tank mixed with "Discover" herbicide With Fungicides for improved control of weeds in spring wheat. HARMONY® SG may be tank mixed or used sequentially with With "Everest" fungicides registered for use on cereal grains. HARMONY® SG can be tank mixed with "Everest" herbicide With Insecticides for improved control of weeds in spring wheat. HARMONY® SG may be tank mixed or used sequentially with With "Hoelon" insecticides registered for use on cereal grains. A tankmix of "Hoelon" 3EC herbicide + HARMONY® SG However, under certain conditions (drought stress, cold weather, herbicide can be applied for annual ryegrass (in the Pacific or if the crop is in the 2-4 leaf stage), tank mixes or sequential Northwest only), wild oat and broadleaf weed control in winter applications of HARMONY® SG with organophosphate and spring wheat, and spring barley. The "Hoelon" 3EC insecticides (such as "Lorsban") may produce temporary crop herbicide rate should be 2 2/3 pints per acre with up to 0.75 yellowing or, in severe cases, crop injury. The potential for crop ounce per acre HARMONY® SG herbicide in spring and winter injury is greatest when wide fluctuations in day/night wheat. temperatures occur just prior to or soon after application. Test A three-way tankmix of "Hoelon" 3EC herbicide + "Buctril" these mixtures in a small area before treating large areas. herbicide + HARMONY® SG herbicide can be applied for Do not apply HARMONY® SG within 60 days of crop annual ryegrass (in the Pacific Northwest only), wild oat and emergence where an organophosphate insecticide has been broadleaf weed control in winter and spring wheat, and spring applied as an in-furrow treatment because crop injury may barley. The "Hoelon" 3EC herbicide rate should be 2 2/3 pints result. per acre with up to 0.75 ounce per acre HARMONY® SG

6 Do not use DuPont™ HARMONY® SG herbicide (with TANK MIXTURES IN PRE-PLANT TotalSol® soluble granules) plus "Malathion" because crop BURNDOWN APPLICATIONS injury will result. HARMONY® SG may be used as a pre-plant burndown With Liquid Nitrogen Solution Fertilizer treatment alone or tank mixed with other herbicides that are Liquid nitrogen fertilizer solutions may be used as a carrier in registered for use as a pre-plant burndown product, including place of water. Run a tank mix compatibility test before mixing glyphosate (such as Roundup), "Landmaster" II, "Fallow HARMONY® SG in fertilizer solution. Master", "RT Master", glyphosate plus dicamba (such as HARMONY® SG must first be dissolved with water and then "Banvel"/ "Clarity") or dicamba (such as "Banvel"/ "Clarity") added to liquid nitrogen solutions (e.g., 28-0-0, 32-0-0). Ensure alone. that the agitator is running while the HARMONY® SG is TANK MIXTURES IN POST HARVEST added. Use of this mixture may result in temporary crop APPLICATIONS yellowing and stunting. HARMONY® SG may be used as a post harvest treatment to If using low rates of liquid nitrogen fertilizer in the spray crop stubble, and should be tank mixed with other herbicides solution (less than 50% of the spray solution volume), the that are registered for use in fallow. addition of surfactant is necessary. Add surfactant at 1/2 pint -1 quart per 100 gal of spray solution (0.06 - 0.25% v/v) based on SOYBEANS local guidance. APPLICATION TIMING When using high rates of liquid nitrogen fertilizer in the spray solution, adding surfactant increases the risk of crop injury. HARMONY® SG herbicide may be applied to soybeans Consult your agricultural dealer, consultant, field advisor, or any time after the first trifoliate has expanded fully. Apply DuPont representative for a specific recommendation before no later than 60 days before harvest. adding an adjuvant to these tank mixtures. USE RATES IN SOYBEANS If 2,4-D or MCP is included with HARMONY® SG and the Make a single application of HARMONY® SG at a rate of fertilizer mixture, ester formulations tend to be more compatible 0.125 (1/8) ounce per acre for selective postemergence (See manufacturer’s label). Additional surfactant may not be broadleaf weed control. needed when using HARMONY® SG in tank mix with 2,4-D ester or MCP ester and liquid nitrogen fertilizer solutions. Note: DuPont™ PINNACLE® was formulated as 25% Consult your agricultural dealer, consultant, field advisor, or DF, HARMONY® SG is more concentrated, be certain DuPont representative for a specific recommendation before to use rate noted above. adding an adjuvant to these tank mixtures. SPRAY ADDITIVES Note: In certain areas east of the Mississippi river unacceptable Applications of HARMONY® SG in soybeans must crop response may occur with use of straight or dilute nitrogen include a nonionic surfactant or crop oil concentrate, and fertilizer carrier solutions where cold temperatures or widely an ammonium nitrogen fertilizer. fluctuating day/night temperatures exist. In these areas consult your agricultural dealer, consultant, field advisor, or DuPont Nonionic Surfactant representative for a specific recommendation before using nitrogen fertilizer carrier solutions. • Apply at the rate of 1 to 2 pt per 100 gal of spray solution (0.125% - 0.25% v/v concentration of Liquid nitrogen fertilizer solutions that contain sulfur can formulated product). Surfactants must contain at least increase crop response. 50% of the formulated product as actual nonionic Do not use low rates of liquid fertilizer as a substitute for a surfactant. Avoid products that do not accurately define surfactant. their ingredients on the product label. Do not use with liquid fertilizer solutions with a pH less than • Using the higher rate of nonionic surfactant, 3.0. particularly under hot, humid conditions, may result in TANK MIXTURES IN FALLOW temporary crop injury. • Do Not Use "Dash" unless specified on other DuPont HARMONY® SG may be used as a fallow treatment, and supplemental labeling. should be tank mixed with other herbicides that are registered for use in fallow, including glyphosate (such as Roundup), • In the States of Arkansas and South Carolina on "Landmaster" II, "Fallow Master", "RT Master", glyphosate soybeans, use only nonionic surfactant at a rate of plus 2,4-D (ester formulations work best), glyphosate plus 0.125% V/V (1 pt/100 gal of spray solution) - unless dicamba (such as "Banvel"/ "Clarity"), 2,4-D (ester formulations specified on other DuPont supplemental labeling. work best), or dicamba (such as "Banvel"/ "Clarity") alone. Crop Oil Concentrate Under dry conditions or during cool weather, a crop oil concentrate at 4 pt/100 gal of spray solution (0.5% v/v) may be used in place of a nonionic surfactant to enhance weed control. • Use a petroleum-based crop oil concentrate with at least 14% emulsifiers/surfactant and 80% oil.

7 The use of crop oil concentrate may result in temporary crop spray adjuvant except as specified in this label, or other DuPont injury. supplemental labeling or technical bulletins. Ammonium Nitrogen Fertilizer Do not tank mix HARMONY® SG with organophosphate insecticides, or apply HARMONY® SG within 14 days before An ammonium nitrogen fertilizer is recommended in addition or after an application of an organophosphate insecticide, as to a surfactant or a crop oil concentrate and required where severe crop injury may occur. velvetleaf is present. With Postemergence Grass Herbicides • Use a high-quality liquid nitrogen fertilizer such as 28-0-0 or 32-0-0 at a rate of 4-8 pints per acre, or HARMONY® SG may be tank mixed with postemergence 10-34-0 at a rate of 2-4 pints per acre. grass herbicides such as DuPont™ ASSURE® II herbicide. Do not tank mix with "Poast" Plus unless specified on other • Alternatively, a high-quality, sprayable grade of ammonium DuPont supplemental labeling. sulfate (21-0-0) may be used at a rate of 2-4 pounds per acre. Under certain conditions, HARMONY® SG may reduce the • Use the lower rate for spray volumes less than 15 gallons activity of the postemergent grass herbicide. The broadleaf per acre. activity of HARMONY® SG will not be affected. Refer to the postemergent grass herbicide label for specific use information CULTIVATION and precautions. A timely cultivation may be necessary to control suppressed With post grass herbicides, surfactant rate (concentration) weeds, weeds that were beyond the maximum size at the time should be 1-2 pints per 100 gallons of spray solution (0.125%- of application, or weeds that emerge after an application of 0.25% v/v concentration). Use of a higher rate of nonionic DuPont™ HARMONY® SG herbicide (with TotalSol® surfactant, particularly under hot, humid conditions, may result soluble granules). in temporary crop injury. Do not use "Dash" or crop oil • Do not cultivate before, during, or within 7 days after the concentrate when tank mixing HARMONY® SG herbicide with application. postemergence grass herbicides unless specified on other • Cultivation may decrease weed control by pruning roots DuPont supplemental labeling. Include a nonionic surfactant and placing the weed under stress. with the tank mix of HARMONY® SG and post grass • The best time to cultivate is approximately 14 days after herbicides such as ASSURE® II herbicide. application. With “Basagran” WEEDS CONTROLLED HARMONY® SG may be tank mixed with "Basagran" When applied to soybeans as directed, HARMONY® SG herbicide at the rate of 0.125 (1/8) ounce HARMONY® SG will control the following weeds: plus 1 pint "Basagran" per acre for control of these weeds in Maximum addition to those listed as controlled by HARMONY® SG Height (inches) alone: Weeds Controlled at Application Maximum Annual Smartweeds 6 Species Height (inches) Lambsquarters 4 cocklebur 4 Pigweed jimsonweed 6 Rough (red root) 12 venice mallow 2 Other species 8 wild sunflower 4 Velvetleaf 6 Applications of HARMONY® SG + "Basagran" must Wild Mustard up to 4" in dia. include a nonionic surfactant or crop oil concentrate and an ammonium nitrogen fertilizer. See the "SOYBEANS" – "SPRAY ADDITIVES" section of this label. Maximum Height (inches) With “Galaxy” Partial Control* at Application HARMONY® SG herbicide at 0.125 (1/8) ounce may be Cocklebur 6 tankmixed with "Galaxy" herbicide at 2 pints per acre for Jimsonweed 4 improved control of black nightshade. Consult the "Galaxy" Wild Sunflower 6 label for additional weeds controlled by "Galaxy". Best results *Partial Control: A visual reduction of weed population as well as are obtained when the HARMONY® SG + "Galaxy" tankmix is a significant loss of vigor for individual weed plants. applied to weeds that are young and actively growing and before weeds exceed the size limits on the respective labels. TANK MIXTURES IN SOYBEANS Applications of HARMONY® SG + "Galaxy" must include a HARMONY® SG may be tank mixed with full or reduced rates non-ionic surfactant or crop oil concentrate and an ammonium of other products registered for use in soybeans. However, nitrogen fertilizer. See the "SOYBEANS" – "SPRAY DuPont will not warrant crop safety or weed control of ADDITIVES" section of this label. Use of the higher rate of HARMONY® SG tank mixtures with any other pesticide or non-ionic surfactant, particularly under hot, humid conditions may increase temporary crop injury. Considerable early season 8 crop injury may result from applications of this tank mix. The following application may also result in crop injury or poor potential for adverse crop response is most pronounced during weed control. hot, humid conditions, under widely fluctuating climactic Applications during periods of hot and humid weather increase conditions, or with applications to soybeans under stress. the risk of crop injury. Symptoms may appear as, but are not limited to, leaf speckling, Wilting, temporary leaf yellowing, reddened veins, and/or leaf bronzing, and/or plant stunting. growth retardation of soybeans may follow application of SEQUENTIAL APPLICATIONS IN SOYBEANS HARMONY® SG. The growth retardation is generally in the form of shortened internode spacing. These effects will DuPont™ HARMONY® SG herbicide (with TotalSol® generally be most evident 5-7 days after application. The soluble granules) following "Pursuit" soybeans will recover quickly under favorable growing conditions. HARMONY® SG may be used as a sequential treatment to control newly emerged weeds following a soil application GENERAL USE AND APPLICATION (preemerge, preplant, or preplant incorporated) of "Pursuit" or DIRECTIONS - ALL CROPS imazethapyr-containing products. GROUND APPLICATION Sequential applications of HARMONY® SG following • For best performance, select nozzles and pressure that postemergent "Pursuit" treatments are not recommended deliver MEDIUM spray droplets. Nozzles that deliver because: COARSE spray droplets may be used to reduce drift, • Crop injury from sequential postemergence applications of provided spray volume is increased to maintain coverage HARMONY® SG following "Pursuit" is greater than from the on small weeds. For optimal product performance and use of either product applied alone. The first application minimal spray drift, adjust the spray boom to the lowest interferes with the soybean plant’s ability to metabolize the possible spray height recommended in manufacturers’ second herbicide treatment. Sequential applications may result specifications. in severe crop injury. • Overlaps or starting, stopping, slowing, and turning while spraying may result in crop injury. • Any weeds not controlled by the "Pursuit" application will be stressed at the time of the sequential treatment. This will result Wheat, Barley, Oat, Triticale, Post-harvest burndown, Pre- in unsatisfactory weed control, particularly for stress sensitive plant burndown and Fallow: weeds such as lambsquarters. • For flat-fan nozzles, use a spray volume of at least 5 gal per acre (GPA). • Weeds that have recovered from a "Pursuit" application will • For flood nozzles on 30" spacings, use at least 10 GPA, typically be larger than labeled size by the time soybeans may flood nozzles no larger than TK10 (or the equivalent), and be safely treated with a HARMONY® SG application. This a pressure of at least 30 psi. For 40" nozzle spacings, use will result in unsatisfactory weed control. at least 13 GPA; for 60" spacings use at least 20 GPA. It Even though not recommended for sequential application, a is essential to overlap the nozzles 100% for all spacings. minimum interval of at least 14 days between applications of • "Raindrop RA" nozzles are not recommended for HARMONY® SG following "Pursuit" is advised to reduce the HARMONY® SG herbicide applications, as weed control potential for crop injury and unsatisfactory weed control. The performance may be reduced. soybeans should be free from stress (herbicide or • Use screens that are 50-mesh or larger. environmental) and actively growing. Weeds should be free from stress and not exceed the labeled size (height) at the time Soybeans: of HARMONY® SG application. Broadcast Application ENVIRONMENTAL CONDITIONS Applications made during or immediately following periods of • Use 10-25 gallons of water per acre. abnormally cold weather for soybeans may result in less than • Use flat fan nozzles at 25-60 psi. satisfactory weed control. • Under heavy weed pressure or dense crop foliage, increase Poor weed control or crop injury may result from applications minimum spray volume to 15-25 gal per acre. made to plants under stress from: • Do not use flood, hollow cone, rain drop, whirl chamber, or • abnormal hot or cold weather, controlled droplet applicator (CDA) type nozzles. • growing conditions such as drought or Unacceptable crop injury, excessive spray drift, or poor weed • water-saturated soil control may result. • soil nutrient deficiencies such as iron chlorosis, • For proper spray coverage, adjust the boom and nozzle height according to the specifications listed by the nozzle • disease, manufacturer. • injury from cultivation, • Ensure that equipment is set up to avoid applying an • nematode, insect, or prior herbicide injury. excessive rate directly over the rows. This is most likely to Delay application until stress passes and weeds and soybeans occur when a nozzle is positioned directly above the row. resume growth. Severe stress from conditions immediately

9 Band Application 5. As the tank is filling, add tank mix partners (if desired) then • For band application, use proportionately less spray mixture. add the required volume of spray adjuvant. Always add • To avoid crop injury, carefully calibrate the band applicator spray adjuvant last. Antifoaming agents may be used. Do not to exceed the labeled rate. not use with spray additives that alter the pH of the spray solution below pH 6.0 as rapid product degradation can • Carefully follow the manufacturer’s instructions for nozzle occur. Spray solutions of pH 7.0 and higher allow for types (flat fan nozzles preferred), nozzle orientation, distance optimum stability of HARMONY® SG. of the nozzles from the crop and weeds, spray volumes, calibration, and spray pressure. 6. If the mixture is not continuously agitated, settling will occur before product is fully dissolved. If settling occurs, • For additional information on row banders, see Du Pont thoroughly re-agitate before using and make sure product is bulletin, "Application Accuracy Row Banders." completely dissolved. AERIAL APPLICATION 7. Apply HARMONY® SG spray mixture within 24 hours of This product is limited to ground application only in the mixing to avoid product degradation. State of New York. Do not apply by air in that state. 8. If HARMONY® SG and a tank mix partner are to be Use nozzle types and arrangements that provide optimum applied in multiple loads, predissolve the HARMONY® spray distribution and maximum coverage. SG in clean water prior to adding to the tank. This will Wheat, Barley, Oat, Triticale, post-harvest burndown, pre- prevent the tank mix partner from interfering with the plant burndown and Fallow: dissolution of the HARMONY® SG. • use 2 to 5 GPA SPRAY EQUIPMENT • Use at least 3 GPA in Idaho, Oregon, or Utah For specific application equipment, refer to the Soybeans: manufacturer’s instructions for additional information on • Use a minimum of 5 GPA. GPA, pressure, speed, nozzle types and arrangements, nozzle heights above the target canopy, etc. When applying DuPont™ HARMONY® SG herbicide (with TotalSol® soluble granules) by air in areas adjacent to Be sure to calibrate air or ground equipment properly before sensitive crops, use solid stream nozzles oriented straight application. Select a spray volume and delivery system that back. Adjust the swath to avoid spray drift damage to will ensure thorough coverage and a uniform spray pattern sensitive crops downwind and/or use ground equipment to with minimum drift. Use higher spray volumes to obtain treat the border edge of fields. See the "SPRAY DRIFT better coverage when crop canopy is dense. Avoid swath MANAGEMENT" section of this label. overlapping, and shut off spray booms while starting, turning, slowing, or stopping, to avoid injury to the crop. Do not CROP ROTATION make applications using equipment and/or spray volumes or Wheat, barley, oat, triticale, soybeans and field corn may be during weather conditions that might cause spray to drift onto replanted anytime after the application of HARMONY® nontarget sites. For additional information on spray drift refer SG. Any other crop may be planted 45 days after the to the "SPRAY DRIFT MANAGEMENT" section of this application of HARMONY® SG. label. GRAZING Continuous agitation may be required to keep HARMONY® Cereals and Soybeans SG and tank-mix partners in solution or suspension. Refer to tank-mix partner labels for additional information. Allow at least 7 days between application and grazing of treated forage. In addition, allow at least 7 days between SPRAYER CLEANUP application and feeding of forage from treated areas to The spray equipment must be cleaned before HARMONY® livestock. Allow at least 30 days between application and SG is sprayed. Follow the cleanup procedures specified on the feeding of hay from treated areas to livestock. Harvested labels of the previously applied products. If no directions are straw may be used for bedding and/or feed. provided, follow the six steps outlined in the "AFTER MIXING INSTRUCTIONS SPRAYING HARMONY® SG " section of this label. Do not use with spray additives that alter the pH of the spray AT THE END OF THE DAY solution below pH 5.0 or above pH 9.0, as rapid product It is recommended that during periods when multiple loads of degradation can occur. Spray solutions of pH 6.0 - 8.0 allow HARMONY® SG herbicide are applied, at the end of each for optimum stability of HARMONY® SG. day of spraying the interior of the tank be rinsed with fresh 1. Fill the tank 1/4 to 1/3 full of water. water and then partially filled, and the boom and hoses 2. While agitating, add the required amount of HARMONY® flushed. This will prevent the buildup of dried pesticide SG. deposits, which can accumulate in the application equipment. 3. Continue agitation until the HARMONY® SG is fully AFTER SPRAYING HARMONY® SG AND dispersed, at least 5 minutes. BEFORE SPRAYING CROPS OTHER THAN 4. Once the HARMONY® SG is fully dissolved, maintain WHEAT, BARLEY, OAT, TRITICALE AND agitation and continue filling tank with water. SOYBEANS HARMONY® SG should be thoroughly mixed with water 1. Empty the tank and drain the sump completely. before adding any other material. 2. Spray the tank walls with clean water using a minimum volume of 10% of the tank volume. Circulate the water

10 through the lines, including all by-pass lines, for at least • Number of Nozzles - Use the minimum number of nozzles two minutes. Flush the boom well and empty the sprayer. with the highest flow rate that provide uniform coverage. Completely drain the sump. • Nozzle Orientation - Orienting nozzles so that the spray is 3. Repeat step 2. emitted backwards, parallel to the airstream will produce larger droplets than other orientations. 4. Remove the nozzles and screens and clean separately in a • Nozzle Type - Solid stream nozzles (such as disc and core bucket containing water. with swirl plate removed) oriented straight back produce The rinsate solution may be applied to the crop(s) specified larger droplets than other nozzle types. on this label. Do not exceed the maximum-labeled use rate. • Boom Length - The boom length should not exceed 3/4 of If cleaners are used, consult the cleaner label for rinsate the wing or rotor length - longer booms increase drift disposal instructions. If no instructions are given, dispose of potential. the rinsate on site or at an approved waster disposal facility. • Application Height - Application more than 10 ft above the Notes: canopy increases the potential for spray drift. 1. Always start with a clean spray tank. BOOM HEIGHT Setting the boom at the lowest referenced height (if 2. Steam-cleaning aerial spray tanks is recommended to specified) that provides uniform coverage reduces the facilitate the removal of any caked deposits. exposure of droplets to evaporation and wind. For ground 3. When DuPont™ HARMONY® SG is tank mixed with equipment, the boom should remain level with the crop and other pesticides, all cleanout procedures for each product have minimal bounce. should be examined and the most rigorous procedure should be followed. WIND 4. In addition to this cleanout procedure, all pre-cleanout Drift potential increases at wind speeds of less than 3 mph guidelines on subsequently applied products should be (due to inversion potential) or more than 10 mph. However, followed as per the individual labels. many factors, including droplet size and equipment type determine drift potential at any given wind speed. AVOID SPRAY DRIFT MANAGEMENT APPLICATIONS DURING GUSTY OR WINDLESS The interaction of many equipment and weather-related CONDITIONS. factors determines the potential for spray drift. The applicator Note: Local terrain can influence wind patterns. Every is responsible for considering all these factors when making applicator should be familiar with local wind patterns and application decisions. how they affect spray drift. IMPORTANCE OF DROPLET SIZE TEMPERATURE AND HUMIDITY When making applications in hot and dry conditions, set up AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY equipment to produce larger droplets to reduce effects of OF THE APPLICATOR. evaporation. The most effective way to reduce drift potential is to apply TEMPERATURE INVERSIONS large droplets (>150 - 200 microns). The best drift management strategy is to apply the largest droplets that Drift potential is high during a temperature inversion. provide sufficient coverage and control. The presence of Temperature inversions restrict vertical air mixing, which sensitive species nearby, the environmental conditions, and causes small-suspended droplets to remain close to the pest pressure may affect how an applicator balances drift ground and move laterally in a concentrated cloud. control and coverage. APPLYING LARGER DROPLETS Temperature inversions are characterized by increasing REDUCES DRIFT POTENTIAL, BUT WILL NOT temperature with altitude and are common on nights with PREVENT DRIFT IF APPLICATIONS ARE MADE limited cloud cover and light to no wind. They begin to IMPROPERLY OR UNDER UNFAVORABLE form as the sun sets and often continue into the morning. ENVIRONMENTAL CONDITIONS! Their presence can be indicated by ground fog; however, if See "WIND", "TEMPERATURE AND HUMIDITY", and fog is not present, inversions can also be identified by the "TEMPERATURE INVERSIONS" sections of this label. movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a Controlling Droplet Size - General Techniques concentrated cloud (under low wind conditions) indicates an • Volume - Use high flow rate nozzles to apply the highest inversion, while smoke that moves upward and rapidly practical spray volume. Nozzles with higher rated flows dissipates indicates good vertical air mixing. produce larger droplets. SHIELDED SPRAYERS • Pressure - Use the lower spray pressures recommended for the nozzle. Higher pressure reduces droplet size and does Shielding the boom or individual nozzles can reduce the not improve canopy penetration. WHEN HIGHER FLOW effects of wind. However, it is the responsibility of the RATES ARE NEEDED, USE A HIGHER-CAPACITY applicator to verify that the shields are preventing drift and NOZZLE INSTEAD OF INCREASING PRESSURE. not interfering with uniform deposition of the product. • Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low drift nozzles. Controlling Droplet Size - Aircraft

11 RESISTANCE may damage crops other than wheat, barley, oat or triticale. When herbicides that affect the same biological site of action are used repeatedly over several years to control the • Wheat, barley, oat, triticale and soybean varieties may same weed species in the same field, naturally-occurring differ in their response to various herbicides. DuPont resistant biotypes may survive a correctly applied herbicide recommends that you first consult your state experiment treatment, propagate, and become dominant in that field. station, university, or extension agent as to sensitivity to Adequate control of these resistant weed biotypes cannot be any herbicide. If no information is available, limit the expected. If weed control is unsatisfactory, it may be initial use of DuPont™ HARMONY® SG herbicide (with necessary to retreat the problem area using a product TotalSol® soluble granules) herbicide to a small area. affecting a different site of action. • Under certain conditions such as heavy rainfall, prolonged cold weather (daily high temperature less than To better manage herbicide resistance through delaying the 50 Deg. F.), or wide fluctuations in day/night proliferation and possible dominance of herbicide resistant temperatures prior to or soon after HARMONY® SG weed biotypes, it may be necessary to change cultural application, temporary discoloration and/or crop injury practices within and between crop seasons such as using a may occur. To reduce the potential of crop injury, tank combination of tillage, retreatment, tank-mix partners mix HARMONY® SG with 2,4-D (ester formulations and/or sequential herbicide applications that have a different perform best– see the "TANK MIXTURES" section of site of action. Weed escapes that are allowed to go to seed this label) and apply after the crop is in the tillering stage will promote the spread of resistant biotypes. If applicable, of growth. see the Weeds Controlled section of this label for additional information on managing herbicide resistant weed biotypes. • HARMONY® SG should not be applied to wheat, barley, triticale or soybeans that are stressed by severe weather It is advisable to keep accurate records of pesticides applied conditions, drought (including low levels of subsoil to individual fields to help obtain information on the spread moisture), low fertility, water-saturated soil, disease, or and dispersal of resistant biotypes. Consult your insect damage, as crop injury may result. Risk of injury is agricultural dealer, consultant, applicator, and/or greatest when the cereal crop is in the 2 to 5- leaf stage. appropriate state agricultural extension service Severe winter stress, drought, disease, or insect damage representative for specific alternative cultural practices or following application also may result in crop injury. herbicide recommendations available in your area. • Do not apply to wheat, barley, oat or triticale crops INTEGRATED PEST MANAGEMENT underseeded with another crop. DuPont recommends the use of Integrated Pest Management • Dry, dusty field conditions may result in reduced control (IPM) programs to control pests. This product may be used in wheel track areas. as part of an Integrated Pest Management (IPM) program that can include biological, cultural, and genetic practices aimed at preventing economic pest damage. Application of this product should be based on IPM principles and practices including field scouting or other detection methods, correct target pest identification, population monitoring, and treating when target pest populations reach locally determined action thresholds. Consult your state cooperative extension service, professional consultants or other qualified authorities to determine appropriate action treatment threshold levels for treating specific pest/crop systems in your area. PRECAUTIONS • Injury to or loss of desirable trees or vegetation may result from failure to observe the following: • Do not apply, drain or flush equipment on or near desirable trees or other plants or on areas where their roots may extend, or in locations where the chemical may be washed or moved into contact with their roots. • Do not use on lawns, walks, driveways, tennis courts, or similar areas. Prevent drift of spray to desirable plants • Injury to or loss of adjacent sensitive crops and vegetation may result from failure to observe the following: • Take all necessary precautions to avoid all direct or indirect contact (such as spray drift) with non-target plants or areas. • Carefully observe all sprayer cleanup instructions both prior to and after using this product, as spray tank residue 12 The DuPont Oval Logo, DuPont™, HARMONY®, PESTICIDE STORAGE AND DISPOSAL EXPRESS®, ALLY®, PINNACLE®, ASSURE® and Do not contaminate water, food, or feed by storage TOTALSOL® are trademarks or registered trademarks of and disposal. DuPont or its affiliates Pesticide Storage: Store product in original container "Maverick" , "Landmaster II", "Fallow Master" , "RT Master" and only. Store in a cool, dry place. "Roundup" are registered trademarks of Monsanto Product Disposal: Waste resulting from the use of "Pursuit", "Raptor", "Beyond" , "Banvel", "Clarity, "Assert", "Avenge", this product may be disposed of on site or at an "Basagran", "Dash", "Galaxy" "Poast" and "Pursuit" are registered approved waste disposal facility. trademarks of BASF Corporation. Container Disposal: For Plastic Containers: Triple "Puma", "Buctril", "Bronate", "Bronate Advanced","Tiller" and "Hoelon rinse (or equivalent). Then offer for recycling or 3EC" are registered trademarks of Bayer Corporation. reconditioning, or puncture and dispose of in a "Raindrop RA" is a registered trademark of Delavan sanitary landfill, or incineration, or, if allowed by "Everest" is a registered trademark of Arvesta Corporation State and local authorities, by burning. If burned, stay "Aim" is a registered trademark of FMC Corporation out of smoke. For Fiber Sacks: Completely empty "Discover" and "Achieve" are registered trademarks of Syngenta fiber sack by shaking and tapping sides and bottom to Corporation loosen clinging particles. Empty residue into "Stinger", "Curtail", "Curtail M", "Lorsban" and "Starane"are registered manufacturing or application equipment. Then dispose trademarks of Dow AgroSciences of sack in a sanitary landfill or by incineration, or, if allowed by State and local authorities, by burning. If "Malathion","Starane + Salvo" and "Starane + Sword" are registered burned, stay out of smoke. Container Refilling and trademarks of United Agri Products Disposal (For Containers up to 250 gal): This is a "Bison" is a registered trademark of Agriliance, LLC. refillable container. If the container is to be refilled, do not rinse with any material or introduce any pesticide other than DuPont ™ HARMONY® SG Herbicide SL - 1373 101508 10-09-08 (with TotalSol® soluble granules). Reseal and return the container to any authorized DuPont refilling facility. If the container is not to be refilled, triple rinse (or equivalent) and offer for recycling or reconditioning, or puncture and dispose of in sanitary landfill, or by incineration, or, if allowed by State and local authorities, by burning. If burned, stay out of smoke. For minor spills, leaks, etc., follow all precautions indicated on this label and clean up immediately. Take special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of wastes. In the event of a major spill, fire or other emergency, call 1- 800-441-3637 day or night. Container Disposal for Bulk Containers: When this container is empty, replace the cap and seal all openings that have opened during use, and return the container to the point of purchase or to a designated location named at time of purchase of this product. The container must only be refilled with this pesticide product. DO NOT USE THE CONTAINER FOR ANY OTHER PURPOSE. Prior to refilling, inspect carefully for damage such as cracks, punctures, abrasions, worn-out threads and closure devices. Check for leaks after refilling and before transporting. Do not transport if this container is damaged or leaking. If the container is damaged, leaking or obsolete, contact DuPont at 1-800-441-3637. If not returned to the point of purchase or to a designated location, triple rinse emptied container and offer for recycling. Disposal of this container must be in compliance with State and local regulations. For minor spills, leaks, etc., follow all precautions indicated on this label and clean up immediately. Take special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of wastes. In the event of a major spill, fire or other emergency, call 1-800-441-3637 day or night.

NOTICE TO BUYER: Purchase of this material does not confer any rights under patents of countries outside of the United States.

13 LIMITATION OF WARRANTY AND LIABILITY NOTICE: Read This Limitation of Warranty and Liability Before Buying or Using This Product. If the Terms Are Not Acceptable, Return the Product at Once, Unopened, and the Purchase Price Will Be Refunded. It is impossible to eliminate all risks associated with the use of this product. Such risks arise from weather conditions, soil factors, off target movement, unconventional farming techniques, presence of other materials, the manner of use or application, or other unknown factors, all of which are beyond the control of DuPont. These risks can cause: ineffectiveness of the product; crop injury, or; injury to non-target crops or plants. WHEN YOU BUY OR USE THIS PRODUCT, YOU AGREE TO ACCEPT THESE RISKS. DuPont warrants that this product conforms to the chemical description on the label thereof and is reasonably fit for the purpose stated in the Directions for Use, subject to the inherent risks described above, when used in accordance with the Directions for Use under normal conditions. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW,DUPONT MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR OF MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL DUPONT OR SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BUYER'S OR USER'S BARGAINED-FOR EXPECTATION IS CROP PROTECTION. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER AND THE EXCLUSIVE LIABILITY OF DUPONT OR SELLER, FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, TORT OR STRICT LIABILITY), WHETHER FROM FAILURE TO PERFORM OR INJURY TO CROPS OR OTHER PLANTS, AND RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT, OR AT THE ELECTION OF DUPONT OR SELLER, THE REPLACEMENT OF THE PRODUCT. To the extent consistent with applicable law that allows such requirement,DuPont or its Ag Retailer must have prompt notice of any claim so that an immediate inspection of buyer's or user's growing crops can be made. Buyer and all users shall promptly notify DuPont or a DuPont Ag Retailer of any claims, whether based on contract, negligence, strict liability, other tort or otherwise or be barred from any remedy. This Limitation of Warranty and Liability may not be amended by any oral or written agreement.