Scanner Programming Manual
2D BARCODE SCANNER 2D BARCODE Programming Manual CA - SC - 20200B
Scanner Programming Manual APPENDIX SCANNER YOUR CONFIGURING STARTED GETTING Symbology ID Symbology Table DataWizard Condensed Wand Control Serial Interface Control Interface Keyboard Control Reading Symbology Selection Interface Host Manual Programming Barcode Using Optional Accessories to YourConnecting Host with Your Familiar Getting Scanner System Commands System Codes Option Commands Set Quick Mode Operation Set Commands Quick Interface Host Shortcut Input ASCII Page Code Page Code Code Table Function Keyboard /Laser /Laser
...... – – Emulation Emulation
Table Languages Corresponding of Uni
...... code Hex Input Setup Input Hex code
......
......
Control ......
......
......
......
......
......
......
......
......
......
...... Table Contents of ......
......
......
......
77 .. 90 89 88 87 86 82 81 80 78 69 54 50 42 10 4 1
9 4 3 2 1
Scanner Programming Manual available at purpose. operation installation and for reference easy an provides document This applications of tounleash yourproductivity. Capture scanners a choosing for you Thank STARTEDGETTING
Getting Familiar wit Familiar Getting
deliver world deliver www.eetgroup.com. - class performance for a broad range broad a for performance class
h cmlt dcmnain is documentation complete The h Y h
our our
Scanner Scanner
. All
Capture
1
CA - SC Trigger Status Indicator Power Indicator - 20200B
Cable Release Hole Cable Beeper Scan Window
Scanner Programming Manual release hole pullto out thecable. clip, paper a of end one straightenplease cable, the removeto like wouldyou If host. i cable the into it plug then cable, interface desired your choose Please s The Host Your to Connecting
canner nterface port of the of port nterface
upr USB support n then and
n RS and scanner
- net t no h cable the into it insert 3 Sra interfaces. Serial 232 and connect it to the to it connect and 2
RS232 Serial USB HID & USB COM
(optional
)
Scanner Programming Manual Hand application of variety demand wide a fulfill to using accessories by various workforce your of productivity enhance can You Using You canYou the scanner In and scanningautomatically while with working scanning presentation between switching optimized auto the for to Thanks position desired to scanning. holder scanner the adjust productivity.Youcan and comfort user’s maximize to s The
presentation mode, presentation tand is specifically designed specifically is tand - free Stand . Optional Optional
select
in an environment with very dim ambient lighting.
higher sensitivity level through the setting of setting the through level sensitivity higher - sense design, the design, sense
Accessories the barcode may not be not may barcode the
for hand for
scanner the stand. the - free applications free
is capable of capable is detect hand
ed - held
by 3
sensitivity. Presentati
n Sensitivity on
to increase scanner’s scanner’s increase to Scanner Programming Manual hne h pormig aiy o mlil stig, you settings, multiple for family programming the change set to code option and code family me the set you As Code. Option and Command System of labels command code bar the incorporates menu command code bar supplemental A explanation andset the on printed detailedexplanationsspecialprogrammingflowchartare and The commands. system major with page same the on listed is label command code bar and family programmable Each programmingpurpose. Command System s Proprietary The Barc CONFIGURING YOUR SCANNER next find to page programming desiredprogramming family. the over turn only need canner
nu to find the option code page. You may scan the desired s ode Programming Programming ode canner
nenl rgamn prmtr. Ther parameters. programming internal
aig r olwn pgs Yu a ra the read can You pages. following or facing
a cd lbl wih lo yu o e the set to you allow which labels code bar a cd cmad ae pcal designed specially are commands code bar , s Code Family
canner s canner
, open the bar code command code bar the open , Manual
concurrently.
s and canner
pin Code Option I yu at to want you If .
are e
for for 4
h Sse Cmad s h hget ee br code bar level highest command which directs the is Command System The Command System olwn te aiy oe eeto t st h desired the set to parameter forthe selected programming family. selection code family the following commands code For mostsetting, you mustselect at least one option code bar of set a “ by represented is Codes Option The Code Option specificrequirements. more than one hundred programming families to meet any family. programming Code Family The the for Code Family wait must User completion beepsbefore scanning another bar code. operations. the complete secondsto fewcommandsa takewillsystemall that note (M_DEFAULT) configurations preset mode ( information programming system entering as ( such operations, PROGRAM , xtn pormig oe ( mode programming exiting ),
0 – s cne t slc te sr desired user the select to scanned is 9 ”, “ ”,
h s The
SYSLIST A the s – F ” canner and finishing selection ( selection finishing and canner ) re ,
a aray provided already has to perform immediate oeig o factory to covering
n s o. Please on. so and EXIT , listing ),
FIN ). Scanner Programming Manual Please give careful attention to become familiar with each with familiar become to attention careful give Please procedure is listed in the following pages for your reference. programm Selection LevelDual or Selection Scan take must you options, and Most programmable flexible and setting. complex more have of ease familiesprogramming several But procedure. programming for possible t families programming as simple as of procedures programming The configurationsin the nextpower on. re non retains or memory ASIC Memory Flash the unit, the off turn s the in stored are commands code bar the by represented parameters, information about the final selected parameters selec to command code bar the scan you As Procedures Programming programmingprocedure. canner
- program the the program s nenl ls Mmr AI or ASIC Memory Flash internal ’s n poeue. ah id f programming of kind Each procedures. ing Scanner l pormig pin. o ne not need You options. programming all utpe cn Slcin Cycling Selection, Scans Multiple k the ake
f o wn t ke te existing the keep to want you if
the s the ige Scan Single
canner
to complete theircomplete to
eoy I you If memory.
are designed are t the desired the t
Selection - volatile
5
akd ih h mthd ersnig ybl of symbol representing matched the with be marked will menu programming the scans of family multiple the procedures, take must family selection programming the If Conventions of ProgrammingofMenu Conventions programming the yo for helpful very be will It indications. beeping programming of details the understand to Appendix in listed Indications” “Beeping the setting Before programming mar menu,andreferto their flowchartsdetails. for bold the find easily can You table. following Category Programming Conventions P.C. ] [ ) ( ccig cn eeto, r ul ee selection level dual or selection, scan cycling ,
t ko te xsig tts hl yu are you while status existing the know to u
s canner
MS Selectable Option Code Option Selectable Code Option Necessary DS CS SS Category Programming Value Factory Default s canner
: : Dual level scan selection scan level : Dual sc : Cycling : Multiple scans selection : Multiple scans Single
.
PC) n od ot itd n the in listed font bold in (P.C.) pes as rfr o the to refer also please ,
scan selection scan Descriptions an selection an
i the in k Scanner Programming Manual Program & End & Program
Please note that the that note Please oe bfr te opein epn. t a dsry all configured parameters. destroy may It beeping. completion the before power memory after you scan the “ non or ASIC Memory Flash internal in parameters
parametersFlash in Memory non ASICor
The scanner The
The scanner The
and inhibit and allnon
then issue issue beeping. thethen completion
will andmode, exit all store programming
will programmingenter mode,
“
PROGRAM s canner
-
“
Scan
Scan
programmingfunctions.
END
”
END
will take 3 takewill
”
”. Please
-
volatilememory,
- 4 seconds to store toseconds 4
don’t
turn off the
- volatile 6
System List, Group & Master Default & Master List,Group System
revision number to viarevisionhost interface, host selected number
The scanner The
parametersinto configurations, factorypreset
The scanner The
t
then issue issue beeping. thethen completion
hen issue issue hen beeping. thecompletion
willinformation product and list the
willall programmable recover
“
M_DEFAULT
“
SYSLIST
Scan
Scan
”
”
Scanner Programming Manual
Single scanselection Single
Yes One of of One One of of One
“ PROGRAM Selection Repeat Family Option Scan “ Scan Scan Scan END
”
No Codes Codes
”
Select one of desired of one Select mode. programming Enter mode. programming Exit family? programming selec to Want parameter. desired of code option one Select families. programming t another t
7
Multiple scans Multiple
Yes
Several Several
One of of One
“
Scan One or One Scan
PROGRAM
Selection
Repeat
Family
“
Option
Scan
Scan
END
Scan
selection
No
”
Codes
Codes
”
Enter programming mode. programming Enter
Select one of desired of one Select programming families. programming
1.
2.
Want to select another select to Want programming family? programming
Exit programming mode. programming Exit
Select one or several or one Select option codes to select to codes option desired parameters. desired
If it If “ option code selection. code option
FIN
’
s necessary, scan necessary, s
”
to terminate to
Scanner Programming Manual
Cycling scan selection scan Cycling
es Ye
O n e o f f o e n O O n e o f f o e n O “ M A R G O R P an n ca S eci n ctio le e S t a e p e R “ i n tio p O ily m a F an ca S an ca S D N E an ca S an ca S “ IN F ”
No Codes e d o C Codes e d o C
” ”
tpormmigmode. m ing m program it x E ily? fam ing m program another select to ant W . n necessary) (If selectio g cyclin ish in F . n selectio s scan “ as eters param f o esired d es d co n tio p o r several o e n o select g yclin C ilies. fam ing m program desired of one elect S ode. m ing m program nter E ngle g in S ” o r r o “
tple ltip u M
”
8
Dual level selection level Dual
es Ye
S e ve ra l l ra ve e S
S e ve ra l l ra ve e S
O n e o f f o e n O
(
d n 2
“
M A R G O R P
eci n ctio le e S
(
t a e p e R
an or o e n O n ca S )
1st
“
ily m a F
an ca S
an ca S
i n tio p O
i n tio p O
D N E
an ca S
an ca S )
No
”
Codes e d o C
Codes e d o C
Codes e d o C
”
trpormmigmode. m ing m program nter E
S elect one of desired of one elect S rga n a ilies. fam ing m program
lc eea i c es d co n tio p o several elect S srd aa eters. param esired d f o
1.
2.
W ant to select another select to ant W rga n a ily? fam ing m program
tpormmigmode. m ing m program it x E
S i c sofdeie esired d f o es d co n tio p o aa eters. param
If it If “ i c eeton. n selectio e d co n tio p o
IN F
elect o n e o r several several r o e n o elect
’
s n ecessary, scan ecessary, n s
”
t tr nate in term to
Scanner Programming Manual . .
USB E USB Th e CA FamilyCode Selection Host Interface Selection F - T Terminal Mode is only available on Trigger Mode. Trigger on available isonly Mode Terminal T SC
- 20200B PROGRAM
d oesn
’ t support
Wand emulation Wand P.C MS MS MS MS MS MS MS MS MS MS MS MS
USB HID turbo mode HID turbo USB HID USB emulation Laser USB EFT Terminal Mode Terminal EFT USB HID Legacy USB PS/2(D mode turbo wedge keyboard PS/2(DOS/V) P Emulation Port Com USB Emulation Wand RS Standard/TTL 25 IBM PS/2, , Laser emulation , Laser S/2 (DOS/V) direct link (keyboard replacement) link (keyboard direct S/2(DOS/V)
OS/V) keyboard wedge standard mode standard wedge keyboard OS/V) standard - 30 series keyboard wedge interface wedge keyboard series 30 Host Interface Selection Interface Host
- , 232 peer
mode mode USB HIDLe
- ParameterSelection to - peer serial peer gacy
and USB and 9
E
F
T Terminal Mode Terminal T
.
OptionCode F_ DEFAULT 21 20 19 18 1 14 13 10 09 08 06 02 7
Scanner Programming Manual FamilyCode Selection Symbol ID :1character
PROGRAM
P.C DS
Code 16K (default= Code (default= PDF417 PDF417/Micro (default= 39 Code Trioptic UPC GS1 DataBar (default= Telepen (default= UK/Plessey (default= MSI/Plessey (default= 11 Code I (default= Postal Code German Chin (default= 5 2of Matrix (default= 5 of 2 Interleaved (default= 5 2of Standard/Industrial (default= 93 Code (default= 32 39/Code Code Codabar/NW EAN UPC GS1 (default= 128 Code Maxi Code Maxi Matrix Data Code QR QR & Micro (default= PostCode Korea Co Codablock UCC Co E ATA (default= AN de 49 - - - (default= Code a Postal - - 128 (default= 128 13 (default= 13 8 (default= E A (default= (default= upon Extended Code Extended upon
( default=
F (
Symbology Reading Control Reading Symbology default= (default=
- ( 7 (default= (default= default= O ParameterSelection N ) E A
F
T ) ) P H U ) User Defined SymbolUser Defined ID C
)
) )
) d
) c S )
)
K R
Y ) (
) X
default=
) ) )
)
D
W ) a J G ) ) ) L
)
)
(default=
M b ) ) V
) I
)
10 Z
)
OptionCode 30 29 28 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
2nd OptionCode F_ ( ( ( (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 char (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 1 1 1
DEFAULT character) character) character) acter)
Scanner Programming Manual FamilyCode Selection Symbol ID :1character
PROGRAM
P.C DS
US Postnet US Planet Post KIX Netherlands Post Japan Intel British Post Post Australian Sensible Chinese Aztec Code ligent Mail ligent
(
default=
( (default= ( (default= SymbologyRead default= default=
(USPS 4CB/One Code) (default= Code) 4CB/One (USPS ParameterSelection (default=
( User Defined SymbolUser Defined ID default= m k o h e
) ) (default= ) ) )
g )
f )
l )
11
ingControl
j )
OptionCode
41 39 38 37 36 34 33 32 31
2nd OptionCode F_ ( ( (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 1 1
DEFAULT character) character)
Scanner Programming Manual
Symbology ID Transmission FamilyCode Selection
PROGRAM
P.C SS SS SS SS SS SS SS
Enable suffix Enablesuffix transmission ID symbology AIM Enableprefix Enablesuffix Capture Enableprefix IDtransmission Disable symbology Enable both prefix and suffix suffix and prefix Enableboth suffix and prefix Enableboth SymbologyReadingControl AIM Captur
Symbology Trans ID
symbology ID symbology e
symbology ID symbology symbology ID symbology ParameterSelection AIM Capture
transmission
symbology ID symbology
transmission transmission 12
symbology ID symbology
mission
transmission
transmission
OptionCode F_ DEFAULT 6 5 4 3 2 1 0
Scanner Programming Manual selection “ thisselection. Butif you select the Rememberto scan Auto Readable Symbology Setting FamilyCode Selection ” ,
Scanner automatically PROGRAM
willterminate this
“ FIN . ”
toterminate
P.C CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS SS
Chinese Sensible (Han Xin) Code (Han Sensible Chinese Aztec Code * Aztec Code MaxiCode * Matrix Data * QRCode */QR Code Micro PostCode Korea 49 Code 16K Code F Codablock PDF417 PDF417 * /Micro IATA (RSS GS1 DataBar Telep UK/Plessey MSI/Plessey 1 Code * 93 Code Postal Code Germany Code PostalChina * 5 of 2 Interleaved 5 2of Matrix 5 2of Standard/Industrial Trioptic 39 Code * 39 Code Codabar/NW EAN EAN UPC UPC GS1 Code 1D Popular Auto - - -
- - 128 8 * 8 * 13 en E * A 128 *
1 *
*
SymbologyReadingControl
-
7 * Readable BarReadable Code Setting
- 14) * 14)
ParameterSelection
13
OptionCode F_ DEFAULT C0 A4 A3 A2 A1 A0 21 20 19 18 17 15 14 13 12 10 09 68 58 48 38 08 47 07 06 05 04 03 02 31 01 00 11
Scanner Programming Manual . . . .
When you set the minimum and maximum length of each symbology, please note the data length of length data the note please symbology, each of length maximum and minimum the set you When (RSS "Pop select you When default. as enabled * are with marketed Above symbologies the isknown application If your Readable Symbology Setting FamilyCode Selection “ Symbology ID Symbology ular 1D" includes "Code 128", "GSA 128", "Code includes 1D" ular - 14)".
PROGRAM ”
into the transmitted data is also helpful to identify the specific symbology. specific the identify to is alsohelpful data transmitted the into
,
you may you
select those known symbologies only to only symbologies known those select - 128", "UPC 128", P.C CS CS CS CS CS CS CS
Postnet Planet Code PostKIX Post Japanese barcode Mail Intelligent Br Post Australian - A", "UPC itish Post
- E", "EAN E",
SymbologyReadingControl
Readable BarReadable Code Setting - 13", "EAN 13",
“ increase the reading speed and decrease the decrease and speed reading the increase Auto ParameterSelection ” - , the scanner only reads those symbologies marked with marked symbologies those reads only scanner , the 8", "Codabar/NW 8", 14
scanned bar code doesn code bar scanned - 7", "Code 39", " Interleaved 2 of 5", "Code 93", "GS1 DataBar DataBar "GS1 93", 5", "Code of 2 " Interleaved 39", 7", "Code
possibility of possibility ’ t include start/stop characters. start/stop t include
reading error. Furt error. reading *.
OptionCode F_ DEFAULT B8 B6 B5 B4 B3 B1 B 0 hermore, to hermore, add
Scanner Programming Manual . .
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneou enabled be ASCIIcannot Full 39 Code and 39 Code Trioptic FamilyCode Selection Trioptic Code 39Family Setting Code 39Max. Length Code 39Min.Length
PROGRAM Code 39Sett
ing
P.C MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Default (98) (98) Default 01 (0 Default 39 Code Disable Trioptic D transmission digit Enablecheck transmission digit Disable check verification digit check 43 EnableMOD Disable MOD A transmissio leading 32 EnableCode A transmission leading 32 Disable Code transmission symbol Enablestart/stop Disable ( 32 SelectCode SelectFu Sta Select 39 EnableCode 39 Disable Code this selection automatically. this selection th Scandigits from 2 98 automatically. this selection Appendix in chart code option the Scandigits from 2 39 Code EnableTrioptic buffering 39 EnableCode isable Code 39 buffering buffering 39 Code isable - - Maximum Minimum
start/stop symbol transmission symbol start/stop ll 1 ndard Code 39 as primary format primary as 39 Code ndard ) ASCII Code 39 as primary format primary as 39 Code ASCII
SymbologyReadingControl
43 check digit verification digit check 43
PARAF,
Code32 39/Code Setting
e option code chart in Appendix in chart code e option sly.
Italian Pharmaceutical) as primary format primary as Pharmaceutical) Italian
ParameterSelection
15
n
; ;
then then
the s the s canner canner
will terminate will terminate will terminate OptionCode F_ (2 digits) (2 digits) (2 DEFAULT FIN FIN D C E B A 1 0 9 8 7 6 5 4 3 2 1 0
Scanner Programming Manual
.
The scanner o scanner The Level Security 39 Code Level Level Level 1 Level 0: Level FamilyCode Selection Code 39Security Level 3 2: : :
If you If you indecoding security sufficient whileproviding fastest, operate to scanner the allows which setting default isthe This mis experiencing are If you mis experiencing are If you PROGRAM ffers ffers failed to read poorly read to failed
four
levels of decode security for for security decode levels of
- printed or out or printed read read
of poorly of poorly of P.C SS SS SS SS
- of - - printed printed printed 3 Level 2 Level 1 Level 0 Level - Code39 spec. bar codes in level 2, please please 2, level in codes bar spec.
or ou or out serious or
bar codes bar
SymbologyReadingControl t - of - spec. spec. :
- of bar codes bar
- spec. spec. Code 39 Setting ParameterSelection bar codes bar
i n level n level select level select 16
2 i n level 1, please select level 0. level0. select please 1, n level , please select level level select , please
3 .
This is the most aggressive setting and may increase the misread. the increase may and setting aggressive most isthe This
1 .
“ in - spec ”
Code39 bar codes. bar Code39 OptionCode F_ DEFAULT 3 2 1 0
Scanner Programming Manual Codabar Check FamilyCode Selection Codabar Length Max. Codabar Min.Length
Codabar Setting PROGRAM
Digit Settings
P.C MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
98 (98) Default 01 (04) Default transmission digit Disable check v digit Enablecheck verification digit Disable check transmission symbol start/stop Enableabcd/tn*e transmission symbol start/stop EnableABCD/TN*E transmission symbol start/stop Enableabcd/abcd transmission symbol start/stop EnableABCD/ABCD transm symbol Disable start/stop format CX SelectCodabar format CLSI SelectCodabar format ABC SelectCodabar format standard SelectCodabar this selection automatically. this selection Appendix in chart code option the Scandigits from 2 automatically. this selection Appendix in chart code option the Scandigits from 2 2) 10/weight (Modulus Runes 11 Modulus Weight DR 7 check 2 10/weight Modulus 11 Modulus 3 10/weight Modulus 16 Modulus transmission digit Enablecheck EnableCodabar Disable Codabar - - Minimum Maximum
SymbologyReadingControl
Codabar/NW erification erification
ParameterSelecti
ission
17 -
7 Setting7
; ;
on then then
the s the s canner canner
will terminate will terminate will terminate OptionCode F_ (2 digits) (2 digits) (2 DEFAULT FIN FIN D C E B A 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
Scanner Programming Manual .
. . .
system, UPC system, UPC enable When
UPC Lead 1 Numeric System Numeric 1 UPC Lead UPC UPC FamilyCode Select - - A Standardization A E &EAN
(UPC/EAN/CAN) WPC Selection UPC FamilySetting
EAN UPC UPC EAN - PROGRAM A check dig A check - - - - - 13 8 Expansion E A 8
-
E expansion, the UPC the E expansion,
it transmission.
Basic Length ion
13 12 8 8
: 12 the : Expand the : Expand
To - E decoded data will be converted to UPC to beconverted will data E decoded P.C
read SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
UPC leading with the 1 numeric system, you must enable this option. this enable must you system, numeric 1 the UPCwith leading Check Digit Enable UPC “leading 1” portion “leading1” EnableUPC p “leading1” Disable UPC EnableUPC Disable UPC EnableUPC Disable UPC system numeric EnableUPC system numeric Disable UPC EnableUP standardization Disable UPC EnableUPC Disable UPC EnableUPC Disable UPC EnableUPC Disable UPC 8 Disable - digit UPC - - - - - digit UPC
1 1 1 1
C standardization ------SymbologyReadingControl - - - - - E check digit transmission transmission digit check E transmission digit check A E expansion E A E and 8 and E E check digit transmission digit check E transmission digit check A E expansion E A - A 13 to
Numeric System
UPC Disable - - digit ENA NC NC digit EAN - -
1 1
-
ortion ortion A &UPC ParameterSelection
-
- - 8 to12
A format and affected by affected and A format 13 with 1 zero insertion. zero with1 13 18 With 2 Addendum - digit UPC
- E Setting Setting E + 2 + 2 + 2 + 2 - digit
- A and 13 A and
With 5 Addendum UPC as such setting, related - digit EAN + 5 + 5 + 5 + 5 - digit
- 13.
Standardization Enable NC NC + 1 + 1
standardization
OptionCode F_ DEFAULT Expansion Enable D C E B A F 9 8 7 6 5 4 3 2 1 0 + 5 + , UPC numeric numeric , UPC
0 0
4
Scanner Programming Manual FamilyCode Selection UPC Suppl Supplement UPC/EAN
PROGRAM S ement Setting ecurity
S can Voting
L evel
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Level 2 Level 1 Level Level Off Separator Addenda UPC Family su Enableforce output digits supplement Disable force digits supplement with 2/5 SelectUPC digits 5supplement with only SelectUPC digits 2supplement with only SelectUPC digits supplement without SelectUPC Level 13 Level 12 Level 11 Level 10 Level 9 Level 8 Level 7 Level 6 Level Level Level Level Level Level None On Separator Addenda UPC Family Only available for UPC for Only available
0 5 4 3 2 1
SymbologyReadingControl pplement digits output digits pplement
UPC - A & EAN A - A &UPC ParameterSelection - 13
19
-
E Setting Setting E
OptionCode F_ DEFAULT D C B A 9 8 7 6 5 4 3 2 1 0 2 1 0 7 6 5 4 3 2 1 0
Scanner Programming Manual . .
The
The scanner offers offers scanner The Security Level UPC/EAN low contrast or damage barcode labels. barcode damage or low contrast digits supplement select you when effective is function This digits. supplement without and with symbols UPC/EAN of mix a Level 2: Level 1 Level 0: Level
Supplement Scan Voting Scan Supplement :
If you failed to read poorly read to failed If you This significa levelmay security mis experiencing are you If
is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in indecoding security sufficient whileproviding fastest, operate to scanner the allows which setting default is the
or or three UPC
le /EAN
vels of decode security for UPC/EAN bar codes bar UPC/EAN for security decode vels of
is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is it before decoded be to has digits supplement 2/5 with UPC/EAN same the times of number isthe
with 2/5 supplement digi supplement 2/5 with - ntly impair the decoding ability of the scanner the ability of decoding the impair ntly printe read
of poorly of d or out d or - of - printed printed - spec. bar codes in level in codes bar spec. ts . or out or The
default value is Level 3. When you select higher level, it may impact the reading speed on poorly on speed reading the impact may it level, higher select you When 3. Level is value default - of - spec. spec. bar codes, especially in characters 1, 2, 7, and 7, 2, 1, characters in especially codes, bar :
1 , please , please .
select level select 20
2 . This is the most aggressive setting and may increase the misread. the increase may and setting aggressive most isthe This UPC /EAN
with only 2 supplement digits supplement 2 only with 8 i 8 n level 1, please select level 0. level select please 1, level n - spec” UPC/EAN bar codes. bar UPC/EAN spec” t ransmitted . It is helpful when decoding decoding when helpful is It . , UPC /EAN S
election of this of election
with only 5 only with - printed, printed,
Scanner Programming Manual FamilyCode Selection Supplement EAN Supplement Setting
EAN Setting PROGRAM
Scan Voting
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS S SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS S
EANAddend output digits supplement Enableforce output digits supplement Disable force digits supplement EANwith 2/5 Select digits supplement 5 EANwith only Select digits supplement 2 EANwith only Select digits supplement EANwithout Select check reading Conversion EnableISBN/ISSN check reading Conversion Disable ISBN/ISSN EnableEAN Disable EAN EnableEAN Disable EAN EnableEAN Disable EAN EnableEAN Disable EAN EnableEAN Disable EAN Level 13 Level 12 Level 11 Level 10 Level 9 Level 8 Level 7 Level 6 Level Level Level Level Level Level None On Separator EANAddenda
5 4 3 2 1
- - - - - SymbologyReadingControl - - - - - a Separator Off Off Separator a transmission digit 8 check chec 13 8 expansion 8 13 8 check digit transmission digit 8 check transmission digit check 13 8 expansion 8 13
k digit transmission transmission k digit
ParameterSelection EAN
Setting 21
OptionCode F_ DEFAULT D C B A B A 9 8 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
Scanner Programming Manual .
low contrast or damage barcode labels. barcode damage or low contrast digits supplement fu This digits. supplement without and with symbols UPC/EAN of mix Voting Scan Supplement The
or or UPC /EAN is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is is it before decoded be to has digits supplement 2/5 with UPC/EAN same the times of number is the
with 2/5 supplement digits supplement 2/5 with
. The
default value is Level 3. When you select higher level, it may impact the reading speed on poorly on speed reading the impact may it level, higher select you When 3. Level is value default nction is effective when you select you when effective is nction 22
UPC /EAN
with only 2 supplement digits supplement 2 only with transmitted . It is helpful when decoding a decoding when ishelpful . It , UPC /EAN
with only 5 5 only with - pr inted, inted, Scanner Programming Manual . .
digit supplement without EAN The prefix. withspecific starting codes bar digits supplement other the enable and digits supplement 2/5 5 or 2,or withonly EAN select If you digit supplement without EAN The prefix. with491 starting codes digits bar If S EAN offers scanner The Security Level UPC/EAN Level 2: Level 1 Level 0: Level
you select EAN with only 2, or 5 or 2/5 supplement digits and enable 491 prefix supplement digit outpu digit supplement prefix 491 enable and digits supplement 2/5 or 5 or 2, only with EAN select you FamilyCode Selection EAN UPC/EAN
upplement Control upplement :
If you failed to read poorly read to failed If you This significant levelmay security mis experiencing are you If Supplement Control PROGRAM
is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in indecoding security sufficient whileproviding fastest, operate to scanner the allows which setting default is the S ecurity
three
leve
L evel ls of decode security for UPC/EAN bar codes bar UPC/EAN for security ls ofdecode
- printed printed read ly impair the decoding ability of the scanner the ability of decoding the impair ly
of poorly of P.C SS SS SS or out or SS SS SS SS SS SS SS S S
-
of - Level 2 Level 1 Level Level Enable 434/439 Supplement Digit Output Digit Supplement Enable434/439 Output Digit Supplement Enable414/419 Output Digit Supplement Enable378/379 DigitOutput Supplement Enable977 Enab DigitOutput Supplement Enable491 output digital supplement prefix Enableall specific output digital supplement prefix specific Disable all printed printed Only available for for Only available - spec. bar codes in level in codes bar spec. le 978/979 Supplement Digit Output Digit Supplement le 978/979 0
or out or
SymbologyReadingControl - of - spec. spec. UPC bar codes, especially in characters 1, 2, 7, and 7, 2, 1, characters in especially codes, bar : - will not will
A & EAN A
1
, please , please ParameterSelection EAN except .
be transmitted. be - 13
Setting
select level select
49
23 1 prefix supplement digit output, the scanner will transmit EAN with 2, or 5, or 2/5 2/5 or 5, or with 2, EAN will transmit scanner the output, digit supplement 1 prefix will
be transmitted. be
2 .
This is the most aggressive setti aggressive most isthe This
t, the scanner will transmit EAN with 2, or 5 or 2/5 supplement supplement 2/5 or 5 or 2, with EAN transmit will scanner the t,
8 i 8 n level 1, please select level 0. level select please 1, level n - spec” UPC/EAN bar codes. bar UPC/EAN spec” ng and may increase the misreadng andmay
OptionCode F_ DEFAULT 7 6 5 4 3 2 1 0 2 1 0
S
election of this of election
.
Scanner Programming Manual .
UPC Codes. Coupon When Code Extended UCC Coupon UCC Coupon Extended Code FamilyCode Selection UCC coupon UCC
PROGRAM
extended code extended - A, EAN A,
- 13
and EANand
function
- 128 must be enabled to scan all types of Coupon Codes. Codes. Coupon of alltypes scan to enabled be must 128 P.C
is SS SS enabled,
Enable UCC Coupon Extended Code Extended Coupon EnableUCC Code Extended Coupon Disable UCC
scanner
UCC Coupon ExtendedCode
decodes UPC decodes SymbologyReadingControl - A barcodes starting with digit with digit starting A barcodes ParameterSelection 24
Setting “
5 ” , EAN ,
- 13 barcode 13 s starting with digit withdigit s starting OptionCode F_ “ 99 DEFAULT ”
and 1 0
GS1 - 128
Scanner Programming Manual FamilyCode Selection Interleaved 2 of 5Setting
IATA Setting PROGRAM
P.C SS SS SS SS SS SS SS SS SS SS S SS SS SS SS SS SS SS SS SS SS SS S
Validate digit check Validate USS character No check Select S 5 of 2 EnableInterleaved 5 of 2 Disable Interleaved transmission symbol Disable start/stop transmission digit Enablecheck transmis digit Disable check verification digit check S/N Airline and EnableCPN, only verification digit checking EnableCPN only verification digit checking EnableS/N verification automatic digit Enablecheck Di le Selectvariable S EnableIATA Disable IATA Enable check digit transmission digit Enablecheck transmission digit Disable check transmission symbol Enablestart/stop elect 15 elect sable check digit verification verification digit check sable German Postal Code as primary format primary as Code Postal German format as primary 5 of 2 Interleaved
OPCC check digit check OPCC - digit fixed length IATA checking checking IATA length digit fixed
IATA Symbolo
ngth IATA ngth
& Interleaved 2 of 5 of5 2 & Interleaved
ParameterSelection sion
gyReadingControl
25
Setting
OptionCode F_ DEFAULT C B A 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
Scanner Programming Manual .
length w setting, Code25 For Code 25 Code FamilyCode Selection
of
Code 25 will increase will 25 Code
25 Code 25Setting PROGRAM Family Family
Max. Length e recommend you recommend e Min. Length
the possibility of reading error. ofreading possibility the
to
P.C select MS MS SS SS SS SS SS SS SS SS SS SS SS SS
only one only 98 (98) Default 01 (0 Default transmission digit Enablecheck transmission digit Disable check verification digit Enablecheck verification digit Disable check Enable Code Postal Disable China Enable Di Enable 5 2of Disable Standard/Industrial this selection automatically. this selection Scan automatically. this selection th Scandigits from 2 sable - - Minimum Maximum 2 digits from th from 2 digits
C 5 2of Matrix Standard type Matrix 2 of 5 2of Matrix hina Postal Code Postal hina
4 )
SymbologyReadingControl of Code 25 or set or 25 Code of
/Industrial 2 of 5 of 2 /Industrial
Code 25 Family Setting
e option code chart in Appendix in chart code e option Appendix in chart code e option
ParameterSelection
the
maximum
26
/ minimum minimum ; ;
then the scanner then the scanner then the bar code code bar
length
will terminate will terminate will terminate .
To decode all decode To
types of types OptionCode F_ (2 digits) (2 digits) (2 Code 25 or to variable variable to or 25 Code DEFAULT FIN FIN 9 8 7 6 5 4 3 2 1 0
Scanner Programming Manual FamilyCode Selection Code 93Max. Length Code 11 Max. Length Code 93Min.Length Code 11 Min. Length
Code 93Setting Code 11 Setting PROGRAM
P.C MS MS MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
98 (98) Default 01 (0 Default transmission digit Enablecheck transmission digit Disable check 93 EnableCode Disabl 98 (98) Default 01 (04) Default transmission digit Disable check Se Select1 verification digit Disable check 11 EnableCode 11 Disable Code this selection automatically. this selection Appendix in chart code option the Scandigits from 2 this selectio th Scandigits from 2 automatically. this selection th Scandigits from 2 this selecti th Scandigits from 2 Enable - - - - lect 2 Minimum Maximum Minimum Maximum e Code 93 e Code check check - - che verification digit check 1 on automatically. ) n automatically. SymbologyReadingControl ck digit verification ck digit
digit transmission digit
Code 11 &Code 93 Setting
e option code chart in Appendix in chart code e option Appendix in chart code e option Appendix in chart code e option
ParameterSelection
27
; ; ; ;
then the s then the then then then
the s the s the s canner canner canner canner
will terminate will terminate will terminate will terminate will terminate OptionCode F_ (2 digits) (2 digits) (2 digits) (2 digits) (2 DEFAULT FIN FIN FIN FIN 3 2 1 0 6 5 4 3 2 1 0
Scanner Programming Manual FamilyCode Selection MSI/Plessey LengthMax. MSI/Plessey Min. Length MSI/PlesseySetting
PROGRAM
P.C MS MS SS SS SS SS SS SS SS SS SS
98 (98) Default 01 (04) Default transmission digit Disable check 11 SelectMOD 10 SelectMOD digit check 10 SelectMOD EnableMSI/Plessy Disable MSI/Plessy this selection automatically. this selection the Scandigits from 2 autom this selection th Scandigits from 2 Enable - - Minimum Maximum check digit transmission transmission digit check SymbologyReadingControl
- - 10 che 10 digit check 10
atically. e option code chart in Appendix in chart code e option
MSI/Plessey Setting
option code chart in Appendix in chart code option
ck digit
ParameterSelection
28
; ;
then then
the s the s canner canner
will terminate will terminate will terminate OptionCode F_ (2 digits) (2 digits) (2 DEFAULT FIN FIN 6 5 4 3 2 1 0
Scanner Programming Manual . .
Level 1 Level 0: Level offers scanner The Level Security 128 Code Setting 128 Code FamilyCode Selection Code ou and will decode Scanner Auto: The ISBT Concatenation output single ISBT barcodes orISBT concatenated notconform barcodestoICCBBA that do standards. On ISBT Concatenation out or will decode not scanner The barcodes. concatenated ISBT output and will decode only scanner The On: ISBT Concatenation The Off: ISBT Concatenation Code 128 Code 128 :
Code 128 This is the default setting which allows the scanner to operat to scanner the allows which setting default isthe This poor of misread experiencing are If you 128 PROGRAM
Security Level
Max. Length Min. Length
two
Setting levels of decode security for for security decode levels of
–
Check ISBT table: The scann ISBT The table: Check
scanner will not output ISBT concatenated barcodes. barcodes. concatenated ISBT will output not scanner
P.C MS MS SS SS SS SS SS SS SS SS SS SS
- printed or out or printed 98 Defau 01 (0 Default 128 EnableCode 128 Disable Code Level 1 Level 0 Level automatically. this selection Appendix in chart code option the Scandigits from 2 automatically. this selection Appendix in chart code option the Scandigits from 2 ISBT On ISBT Concatenation ISBT Concatenation ISBT Concatenation Code128 - - Minimum Maximum
Concatenation Auto Concatenation lt (98) lt (98)
1
er will only output ISBT concatenated barcodes that conform to ICCBBA standards. The scanner will not scanner The standards. ICCBBA to conform that barcodes ISBT concatenated output only will er bar codes bar )
- of SymbologyReadingControl
tput both ISBT concatenated barcodes and single ISBT barcodes. singleISBT and ISBT barcodes concatenated tput both - spec. bar spec.
e fastest, while providing sufficient security in decoding "in indecoding security sufficient whileproviding fastest, :
On Off
C
– code in code
ode 128ode Check ISBT table Check
ParameterSelection
level1, 29
Setting
ple ase select level 0 level select ase
; ;
then the scanner then the scanner then the
.
will terminate will terminate will terminate - spec." Code128 spec."
put single ISBT barcodes. ISBT single put OptionCode
bar F_ (2 digits) (2 digits) (2
DEFAULT codes FIN FIN 1 0 4 3 2 1 0
.
Scanner Programming Manual FamilyCode Selection GS1 GS1
GS1 - - 128 LengthMax. PROGRAM 128 Min. Length - 128 Setting
P.C MS MS SS SS SS SS
this selection automaticall this selection Appendix in chart code option the Scandigits from 2 98 (98) Default automatically this selection in chart code option the Scandigits from 2 01 (0 Default EnableGS1 Disable GS1 - - Minimum Maximum 1 ) - - 128
SymbologyReadingControl 128
GS1 y. .
ParameterSelection - 128 30
Setting
Appendix ; ;
then the scanner then the scanner then the
will terminate will terminate will terminate OptionCode F_ (2 digits) (2 digits) (2 DEFAULT FIN FIN 1 0
Scanner Programming Manual FamilyCode Selection UK/PlesseyMax. Length UK/PlesseyMin. Length UK/PlesseySetting
PROGRAM
P.C MS MS SS SS SS SS SS SS SS SS SS SS
this selection automati this selection Appendix, in chart code option the Scandigits from 2 98 (98) Default automatically. this selection i chart code option the Scandigits from 2 01 (04) Default transmission digit Disable check X A to EnableConvert X A to Disable Convert SelectU Format Standard SelectUK/Plessey EnableUK/Plessey Disable UK/Plessey Enable check digit transmission digit Enablecheck - - Minimum Maximum K/Plessey CLSI Format K/Plessey SymbologyReadingControl
UK/Plessey Setting cally. - - F
F
ParameterSelection
31
n Appendix, n Appendix, then the scanner then the scanner then the
will terminate will terminate will terminate OptionCode F_ (2 digits) (2 digits) (2 DEFAULT FIN FIN 7 6 5 4 3 2 1 0
Scanner Programming Manual FamilyCode Selection Telepen Max. Length Telepen Min.Length
Telepen Setting PROGRAM
P.C MS MS SS SS SS SS SS SS SS SS
this selection automatically. this selection Appendix, in chart code option the Scandigits from 2 98 (98) Default automatically. this selection Appendix, in chart code option the Scandigits from 2 01 (04) Default transmission digit Enablecheck D mode ASCII Full SelectTelepen mode Numeric SelectTelepen EnableTelepen Disable Telepen isable check digit transmission transmission digit check isable - - Minimum Maximum SymbologyReadingControl
Telepen Setting
ParameterSelection
32
then the scanner then the scanner then the
will terminate will terminate will terminate OptionCode F_ (2 digits) (2 (2 DEFAULT digits) FIN FIN 5 4 3 2 1 0
Scanner Programming Manual
.
The scanner scanner The Limited GS1 128 Level Level Level Level FamilyCode Selection GS1 DataBar GS1 DataBar GS1 DataBar Limited GS1 DataBar 3 2 1
: : :
This is the default setting which allows the scanner to operat to scanner the allows which setting default isthe This poor of misread experiencing are If you If you If you Security Level PROGRAM F460 failed to read poorly read to failed Security Level / F560 F560
Max. Min.
Setting offers offers
Length Length
three
-
printed or out or printed levels of decode security for for security decode levels of P.C MS MS SS SS SS SS SS SS SS SS SS SS SS
- printed or o or printed - of 74 (74) Default 01 (04) Default 3 Level 2 Level 1 Level Enable Disable Enable Disable Enable Disable in Appendix for Only available automatically. this selection Appendix in chart code option the Scandigits from 2 for Only available scanners. F560 F460, for Only available DataBar GS1 for Only available - spec. bar codes in level 2, please please level 2, in codes bar spec. - - Minimum Maxi
GS1 DataBar GS1 DataBar GS1 ( DataBar GS1 mum GS1 DataBar DataBar GS1 L DataBar GS1 ( DataBar GS1 ut - ; of SymbologyReadingControl then the scanner then the GS1 - spec. bar spec. GS1 GS1 DataB GS1 e DataB
fastest, while providing sufficient s sufficient whileproviding fastest,
GS1 L E E RSS imited RSS xpanded DataB imited xpand
code in code ar ar -
ParameterSelection -
14 Limited Limited 14 DataBar Setting
ar. ar ed
) will terminate this selection automatically. selection this terminate will )
Expanded Limited
Expanded level
bar codes bar select level select 33
3 ,
please select level level select please
Scan 2 digits from the option code chart chart code option the Scandigits from 2 :
1 . This is the most aggressive setting and may increase the misread. the increase may and setting aggressive most isthe This ;
then the scanner then the ecurity in decoding "in indecoding ecurity
2 .
will terminate will terminate
- spec." spec." GS1 GS1 128 OptionCode
Limited F_ (2 digits) (2 digits) (2 DEFAULT FIN FIN ” 2 1 0 5 4 3 2 1 0
bar
codes
.
Scanner Programming Manual PDF41 FamilyCode Selection Composite Codes Setting
Codablock FSetting
7 /Micro PROGRAM
PDF417
Setting
P.C SS SS SS SS SS SS SS SS SS SS
En Disable MicroPDF417 EnablePDF417 Disable PDF417 Enable Disable isdetected MicroPDF417 the when transmitted U selected, is linked always UPC Mode: Composite If UPC transmitted UP isselected, linked never UPC Mode: Composite If UPC linked always UPC Mode: Composite UPC Co UPC codes Enablecomposite codes Disable composite able MicroPDF417 able
mposite Mode: UPC never lin never UPC Mode: mposite PDF417/MicroPDF417 &Setting PDF417/MicroPDF417
whether whether SymbologyReadingC
Composite Codes,Composite F Codablock
MicroPDF417 symbol isdetected symbol MicroPDF417
ParameterSelection
34 ked ked
. ontrol
rnt not. or
PC barcodes are only are PC barcodes C
barcodes are barcodes
OptionCode F_
DEFAULT 3 2 1 0 1 0 3 2 1 0
Scanner Programming Manual FamilyCode Selection Code 16K Length Max.
Code 16K Min.Leng Code 49Max. Length Code 49Min.Length
Code 16K Setting Code 49Setting PROGRAM
th
P.C MS MS MS MS SS SS SS SS SS SS SS SS
81 ( Default 01 (0 Default 49 EnableCode 49 Disable Code 160 ( Default 01 (0 Default 16K EnableCode 16K Disable Code this selection automati this selection Scan automatically. this selection Scan automatically.this selection Scan automa this selection Scan - - - Minimum Maximum Maximum - Minimum 2 2 3 3
digits from th from digits th digits from th from digits Appendix in chart code option the digits from 81 160 1 1 ) ) ) ) SymbologyReadingControl
Code 16K &Code Setting49
e option code cha code e option e option code chart in Appendix in chart code option e c option e tically
cally. .
ParameterSelection ode chart in Appendix in chart ode 35 rt in Appendix in rt
; ; ; ;
then the scanner then the scanner then the then the scanner the then scanner the then
will terminate will terminate will terminate will terminate will terminate will terminate OptionCode F_ ( ( DEFAULT 2 3 ( ( 2 3 digits) digits) FIN FIN
digits) digits) 1 0 1 0 FIN FIN
Scanner Programming Manual FamilyCode Selection
QR QR
QR Code Code Min.Length PROGRAM Code Setting
Max. Max. Length
P.C MS MS SS SS SS SS
7089 ( Default 01 (0 Default Reading Inverse Code QR Auto detect Reading Inverse Code EnableQR Reading Inverse Code Disable QR Append Code EnableQR Append Code Disable QR Code EnableMicroQR Code Disable MicroQR Code EnableQR Code Disable QR this selectio Scan automatically. this selection Scan - Maximum - 4 Minimum 4
digits from th digits from th digits from 7089 1 ) n automatically. SymbologyReadingControl
)
e option code chart in Appendix in chart code e option code e option
QR Code Setting
ParameterSelection
chart in Appendix in chart 36
; ;
then the scanner then the scanner then the
will terminate will terminate will terminate OptionCode F_ ( ( DEFAULT 4 4
digits) digits) FIN FIN 8 7 6 5 4 3 2 1 0
Scanner Programming Manual .
sma the read to time will longer take level higher 2”.“Level The or “Level 1” select you when decreased snappiness scanner’s re be can’t code DataMatrix small When Reading Code DM Small FamilyCode Selection Small DM Code Reading Data MatrixMax. Length D
ata MatrixMin. Length Data MatrixSetting
PROGRAM
:
ad by 2D scanner, you can select "Level 1” or “Level 2” to improve the scanner's ability to read small DataMatrix code. The The code. DataMatrix small read ability to scanner's the improve to 2” “Level or 1” "Level select can you 2D scanner, by ad P.C MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Level Level 1 Level Standard 3116 ( Default 01 (0 Default Images Mirror Matrix Data Auto Detect Images Mirror Matrix EnableData Images Mirror Matrix Disable Data Reading Inverse Matrix Data Auto Detect Reading Inverse Matrix EnableData Disa Enabl Matrix Disable Data this selection automatically. this selection Scan automatically. this selection Scan - Maximum ble Data Matrix Inverse Reading Inverse Matrix Data ble - e Data Matrix Matrix e Data 4 Minimum 4 2
digits from the digits from the digits from 3116
1 ) SymbologyReadingControl
)
Data MatrixData Setting option code chart in Appendix in chart code option Appendix in chart code option
ParameterSelection
37
; ; then the scanner then the scanner then the
will terminate will terminate will terminate ll Data Matrix barcode. Matrix OptionCode F_
( ( DEFAULT 4 4
digits) digits) FIN FIN 2 1 0 9 8 7 6 5 4 1 0
Scanner Programming Manual
FamilyCode Selection MaxiCode Max. Length
MaxiCode Min. Length
MaxiCode Setting PROGRAM
P.C MS MS SS SS SS SS
this selection automati this selection Scan 150 ( Default automatically. this selection Scan 01 (0 Default EnableMaxiCode Disable MaxiCode - Maximum - Minimum 3 3
digits from the option code chart in Appendix, Appendix, in chart code option the digits from in chart code option the digits from 150 1 ) ) SymbologyReadingControl
cally. MaxiCode
ParameterSelection 38
Setting
Appendix, Appendix,
then the scanner then the scanner then the
will terminate will terminate will terminate OptionCode F_ ( ( DEFAULT 3 3
digits) digits) FIN FIN 1 0
Scanner Programming Manual FamilyCode Selection Aztec Code Max. Length Aztec Code Min. Len
Aztec Code Setting
PROGRAM
gth
P.C MS MS SS SS SS SS
Disable Aztec Code Code Disable Aztec this selection automatically. this selection Scan 3832 ( Default automatically. this selection Scan 01 (0 Default Code EnableAztec
- Maximum - 4 4 Minimum
digits from th digits from Appendix in chart code option the digits from 3832 1 ) SymbologyReadingControl
)
e o
AztecSetting Code
ption code chart in Appendix in chart code ption
ParameterSelection 39
; ;
then the scanner then the scanner then the
will terminate will terminate will terminate OptionCode F_ ( ( DEFAULT 4 4
digits) digits) FIN FI 1 0
N
Scanner Programming Manual .
Australian Post Setting: Setting: Post Australian encoding. FamilyC Australian Post Setting
British Post Setting Japan Post US Postnet Setting
US Planet Setting
PROGRAM ode Selection
Setting
Auto
- discriminate output option increase the risk of misread because the encoded data format does not specify the Encoding Table u Table Encoding the specify not does format data encoded the because misread of risk the increase option output discriminate
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Enable Japan Post EnableJapan Post Disable Japan Digit Transmission EnableCheck DigitTransmission Disable Check Post EnableBritish Post Disable British Digit Transmission EnableCheck DigitTransmission Disable Check Postnet EnableUS Disable Digit Transmission EnableCheck DigitTransmission Disable Check Planet EnableUS Planet Disable US Au Encoding Table) (C Output Encoding Alphanumeric Table) Encoding (N Output Encoding Numeric Output Raw format Post EnableAustralian Post Disable Australian to - discriminate Output (Combination C & N Encoding Table) C& N (Combination Output discriminate
Australian US Post, Postnet, US Planet, US Postnet Postnet US British Post & Japan Post SettingBritish Post SymbologyReadingControl
ParameterSelection
40
OptionCode F_ DEFAULT 1 0 3 2 1 0 3 2 1 0 3 2 1 0 5 4 3 2 1 0
sed for for sed
Scanner Programming Manual Netherlands KIX Code FamilyCode Selection Korea Post Code Setting (USPS 4CB/One Code)
Intelligent Mail
PR OGRAM
Setting
Setting
P.C SS SS SS SS SS SS
Enable Disable Mail EnableIntelligent Mail Disable Intelligent EnableNetherlan Code KIX Disable Netherlands Length fixed in 6characters
NetherlandsKIX Intelligent Code, Mail
SymbologyReadingControl & Korea Post Code Post Setting& Korea ds KIX Code Code KIX ds
ParameterSelection .
41
OptionCode F_ DEFAULT 1 0 1 0 1 0
Scanner Programming Manual . . .
Keyboard Interface Message String : String Message Interface Keyboard pr set To the to Please refer
FamilyCode Selection 1 - 15 characters Preamble eamble or postamble as function key output, you must enable the the enable must you key output, as function postamble or eamble
Keyboard Layout PROGRAM
ASCII/HEX Table ASCII/HEX
Data Length 2
- 4
digits
listed in the Appendix to determine HEX codes for characters, symbols, and functions to be used as pre used be to functions and symbols, characters, for HEX codes determine to Appendix the listed in
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
1 or Prefix
Czech (QWERTY) (DOS/V) Japan (QWE Iceland Switzerland (AZERTY) Belgium (QWERTY) Denmark (QWERTY) Netherlands (QWERTY) Italy Spain (QWERTY) Norway (QWERTY) Portugal (QWERTY) Sweden/Finland Spain ( (QWERTY) French Canadian Kingdom United (QWERTZ) Germany (AZERTY) France U 3
SA (QWERTY) SA (QWERTY) characters Symbol (Latin America (Latin Spanish
Keyboard Setting Layout (Language)
ID
Keyboard Interface Con Interface Keyboard - Germany (QWERT Germany RTY) ,
QWERTY) -
UK ( UK
Variable Scanned DataScanned
,
QWERTY) QWERTY) “Function Key Emulation” Key “Function
length
ParameterSelection
Z
)
42
1 or Suffix Suffix 3
characters Symbol
feature as listed in page 3 in page listed as feature ID
trol
1 - 15 characters Postamble
- 25 first. 25
Record Suffix 1 character a mble or postamble. or mble OptionCode F_ DEFAULT
17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Scanner Programming Manual
F FamilyCode Selection Caps LockRelease Contr NC1 Caps LockControl
Symbol Char Record Suffix PROGRAM Postamble Preamble
.
Transmi
ol
t
P.C MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
“ Caps Lock On, Caps Off Caps On, Caps Lock “ KePS/2, (PC/AT, Auto Detect State On” “Caps Lock State Off” “Caps Lock Enable Disable 1 None 1 None Maximum 15 Maximum 15 Maximum character) (1 character defined User Pad) Key (Numeric ENTER SPACE TAB RETURN None Caps Lock On, Shift Off Shift On, Caps Lock - - 15 characters 15 characters 15
RecordPreamble, Suffix, Postamble - - FNC1Transmit KeyboardInterface Control character input; scan “FIN” to terminate this selectio this terminate “FIN” to scan input; character selection. this terminate “FIN” to scan input; character
” ”
ParameterSelection
yboa rd Replacement and DOS/V Machines only) Machines DOS/V and Replacement rd
43 &
Caps Lock
n. ,
OptionCode F_ [00 [00 5, (00 5, DEFAULT - - 7 7 FIN FIN F F 1 0 2 1 0 1 0 4 3 2 1 0 ], [FIN] ], [FIN] ],
- 7F)
Scanner Programming Manual . . .
wi “ select on, is state Lock Caps the If transmission. data normal perform the check Please you. for functions above the perform don’t selections these interfaces, host other the While selecting “ of function The is transmitted. Appendi in is provided FNC1 Symbol Char.Transmit: Symbol FNC1 thout changing the status of Caps Lock switch. Lock Caps of status the changing thout
Caps Lock Control Lock Caps actual x -
Keyboard Function Code Table. When the scanner interface is set to isset interface scanner the When Table. Code Function Keyboard Caps Lock state in use while software application is running. If running. is application software while use in state Lock Caps
When this function is enabled and the FNC1 is contained in scanned data, the scanner transmits the FNC1 to the host. Chart of Chart host. the to FNC1 the transmits scanner the data, scanned in iscontained FNC1 the and enabled is this function When ” and “ and ” Key Pad Emulation Pad Key
” are are ” Caps Lock On Lock Caps only
available for IBM PC/AT IBM for available ” state. Select “ Select state. ”
44 the Caps Lock state is off, select “ select off, is state Lock Caps the
keyboard, the scan code is converted to corresponding key function before it before keyfunction corresponding to isconverted code scan the keyboard,
, PS/VP, PS/2 series personal computers and compatible machines. machines. compatible and computers personal series PS/2 PS/VP, , Auto Detect Auto ”, Scanner Caps Lock Off Lock Caps
will perform special transmission handshaking handshaking transmission special perform will ” state, state, ” and then the scanner the then
theFNC1
will
Scanner Programming Manual . . .
Intermessage Delay Intermessage Interfunction Delay Interfunction Delay Intercharacter aiu ntbo o dstp C ytm rqie ifrn tmn prmtr etns Pes awy ad n eta nt s saf as unit extra one add always Please settings. parameter timing parameters. different require systems PC desktop or notebook various mul 2) skipped; be may characters fast, too is speed transmission FamilyCode Selection
Intercharacter Delay Intermessage Delay Interfunction Delay
PROGRAM
is a
is a time delay between messages output by output messages between delay is atime is a time delay between data characters output by output characters data between delay time a is
time time
delay
of transmission of of transmission of
P.C MS MS MS SS SS SS
this selection automatically. this selection Scan 1 None 1 None 1 None this selection automatically. this selection the Scandigits from 2 automatically. this selection Appendix in chart code option the Scandigits from 2 - - - 99 (x5) msec. (x5) 99 msec. (x5) 99 msec. (x5) 99 segment
2 digits from the from 2 digits s
in KeyboardInterface Control
Scanner each each
titasking operation system or host computers in a network may slow down the keyboard handling; 3) handling; keyboard the down slow may network a in computers host or system operation titasking message string message
Scanner option code chart in Appendix in chart code option option code chart in Appendix in chart code option . Increasing this delay will help host applications process applications host help will delay this . Increasing
Delay Setting
ParameterSelection . These two parameters are used to synchronize data communication when : 1) the data the 1) : when communication data synchronize to used are parameters two These . .
45
; ; ;
then the scanner then the then the scanner then the scanner then the
will terminate will terminate will terminate will terminate will terminate
the incoming data on time. on data incoming the e y agn hn dutn tee two these adjusting when margin ty OptionCode F _ (2 digits) (2 digits) (2 digits) (2 DEFAULT FIN FIN FIN
Scanner Programming Manual FamilyCode Selection Function Key Emulation
Dollar Sign Control Key PadEmulation Upper/Lower Case
PROGRAM
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS
Upper/Lower Case Case Upper/Lower Dollar sign output as “ £ as output sign Dollar “ “ € as output sign Dollar “ as output sign Dollar “ as output sign Dollar case) lower as output characters all (force case Lower case) upper as output characters all (force case Upper case) inverse to output characters all (change case Inverse upper/lower the (neglect case Normal output On) Lock (Num keypad as output Enablenumeric emulation pad Disable key Appendix to Refer Ctr 00 EnableASCII Dollar sign output as “ as output sign Dollar l - Output
Emulation Setting, Key & Emulation Pad
KeyboardInterface Control - 31 code as keyboard function code output output code function keyboard as code 31 –
Keyboard Function Code Table for details. for Table Code Function Keyboard ¥
$ “ $ ¢ “ ¢
“ “
ParameterSelection
Setting 46
case control) control) case
, Dollar Dollar Sign
Control
OptionCode F _ DEFAULT 4 3 2 1 0 3 2 1 0 1 0 1 0
Scanner Programming Manual FamilyC Barcode Encoding Format
PROGRAM ode Selection
P.C
MS Code Page:
ISO 8859 ISO ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 WIN1258 WIN1257 WIN1256 WIN1255 WIN1254 WIN1253 WIN1252 WIN1251 WIN1250 Code Code Code Code Code UTF8
8859
page 874 page 932 page 936 page 949 page 950
------13 Latin 7, Baltic 7, Latin 13 Thai 11 Nordic 6, Latin 10 Turkish 5, 9 Latin 8 Hebrew 7 Greek 6 Arabic 5 Cyrillic European Northern 4, 4 Latin European Southern 3, 3 Latin European Central 2, 2 Latin Wester 1, 1 Latin ◆ Barcode Encoding Format
KeyboardInterface Control
n European n ParameterSelection
47
, Keyboard Output
OptionCode F_ DEFAULT 29 28 27 26 25 24 23 22 21 20 1e 1d 1b 1a 19 18 17 16 15 14 13 12 11 10 00 1c 1f
Scanner Programming Manual . .
Barcode Encoding Format Encoding Barcode Languages Corresponding
Keyboard Output
: :
2D barcodes barcodes 2D Please see Please see Appendix below, “Code Page “Code below, Appendix can be be can MS
encoded using different c different using encoded MAC Unico ISO 8859 ISO 8859 ISO 8859 WIN1258 Ou WIN1258 Output WIN1257 Output WIN1256 Output WIN1255 Code Code Code Code Code Code Code Code Code Code Output WIN1254 Output WIN1253 Output WIN1252 Output WIN1251 Output WIN1250 Code Code Code Code Code Output Unicode WIN Wordpad Output Unicode WIN Notepad
page 775Output page 720Output page 862Output page 857Output page 737Output page 437Output page 850Output page 866Output page 855Output page page page 932Output page 936Output page 949Output page 950Output - - - 16 Latin 10, South 10, Latin 16 9 Latin 15 Celtic 8, Latin 14
de Output de 852 Output 852 Output 874 tput
◆ -
Table of Corresponding Languages Corresponding of Table
ode pages ode
- Eastern European Eastern
. 48 To properly decode the data the decode properly To
” .
of a 2D barcode, barcode, 2D a of the
scanner scanner must first be set be first must 1d 1b 1a 39 38 37 36 35 34 33 32 31 30 19 18 17 16 15 14 13 12 11 10 03 02 01 2b 2a 1c 2c
to the to Scanner Programming Manual .
Keyboard Output Keyboard 3) 2) 1) language. content’s the page code corresponding
device is device WIN required the has Output Unicode WIN Notepad Setup Input required the has device Mac your that Output Device Mac
WordPad set to the to set ” .
:
Different languages use different code pages. pages. code different use languages Different Unicode Output Unicode Unicode HexInp Unicode
US English input method. English input US : Please
If you If
of such data such of r host is a Mac device Mac a is host r
check check : If your host is a Windows device, you can output the data in Unicode format to Notepad. You must first ensure that your Windo your that ensure first You must Notepad. to format in Unicode data the output can you device, Windows isa host your If :
If your host is a Windows device, yo device, Windows a is host your If ut Setup ut your your .
Select UTF8 if the 2D barcode was 2Dbarcode the if SelectUTF8 Unicode Hex Input Setup Input Hex Unicode system locale system ,
and is set to the US English input method. method. input English US the to isset and
, select “MAC Unicode Output” Unicode “MAC select ,
setting
in Windows in For your scanner scanner your For
and and is u can output the the output can u encoded inUnicode encoded configured for for configured
and make sure that it also matches this language this matches it also that sure make and to properly display the content of content the display properly to as the scanner’s the as 49 Please see Appendix below, “Code Page “Code below, Appendix see Please the 1 the
data in Unicode in data 6 (UTF - bit input method. Pleas method. input bit
- output 8).
setting (the data will be in Unicode). You must also first ensure ensure first also must You Unicode). in be will data (the setting format
to a 2D barcode WordP e see Appendix below, “Code Page “Code below, Appendix see e ad. You must first ensure first must You ad. .
, select the select -
Unicode Hex Input Setup Input Hex Unicode
code
page
that corresponds to corresponds that that your Windows Windows your that -
” Unicode Hex Hex Unicode .
ws device ws device Scanner Programming Manual .
Serial Interface Message String (RS232, USB COM) : COM) USB (RS232, String Message Serial Interface F FamilyCode Selection NC1 1 char STX
STX/ETX Control Symbol Char acter
Record Suffix PROGRAM Postamble Preamble
1 - 15 characters Preamble .
Transmit
Data Length 2 - 4 P.C MS MS MS SS SS SS SS SS SS SS SS SS SS SS SS
digits
scan code is converted to corresponding key function before it is transmitted it before keyfunction corresponding to isconverted code scan is interface scanner the the When data, Table. Code scanned Function Keyboard in contained is Appendix in FNC1 provided is FNC1 the of Chart host. the the to FNC1 the transmits scanner and enabled is function this When Enable Disable 1 None 15 Maximum 1 No character) (1 character defined User interface. viaserial transmitted frame data star the indicate to used characters two are STX/ETX transmission EnableSTX/ETX transmission Disable STX/ETX Maximum 15 Maximum SPACE (20H) TAB (09H) (0D0AH) CRLF (0AH) LF CR (0DH) None - -
15 characters 15 characters 15 RecordPreamble Suffix, ne
1 or Prefix
3
characters Symbol
- - character input; scan “FIN” to terminate this selection. this terminate “FIN” to scan input; character character input; scan “FIN” to terminate this selection. this terminate “FIN” to scan input; character
Serial Interface Control Interface Serial
ID
Variable Scanned DataScanned ParameterSelection
length
50 1 or
Suffix Suffix ,
Postamble 3
characters Symbol ID ting and ending of the total total the of ending and ting
1
- 15 characters Postamble Setting
set to keyboard, the the keyboard, to set
1 character ETX
–
OptionCode F_ [00 [00 Record Suffix 1 char 6, (00 6, DEFAULT - - 7 7 FIN FIN F F 1 0 5 4 3 2 1 0 1 0 ], [FIN] ], [FIN] ], acter
- 7F)
Scanner Programming Manual . . .
Intercharacter Delay Intercharacter Delay Intermessage Interfunction Delay Interfunction aiu ntbo o dstp C ytm rqie ifrn tmn prmtr etns Pes awy ad n eta nt s saf as unit extra one add always Please settings. parameter timing different parameters. require systems PC desktop or notebook various skipped be may characters fast, too is speed transmission data FamilyCode Selection
Intercharacter Delay Intermessage Delay Interfunction Delay
PROGRAM
is a time delay is atime
is a time delay between messages output by output messages between delay is atime
is a time delay between data characters output by output characters data between delay time a is
between between P.C MS MS MS SS SS SS transmission
1 None 1 None 1 None this selection automatically. this selection Scan automatically. this selection Appendix in chart code option the Scandigits from 2 automatically. this selection Appendix in chart code option the Scandigits from 2 - - - 99 (x5) msec. (x5) 99 msec. (x5) 99 msec. (x5) 99
2 digits from the option code chart in Appendix in chart code option the from 2 digits
and reception and ; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3) 3) handling; keyboard the down slow may network a in computers host or system operation multitasking 2) ; the s
SerialInterface Control canner
of each segment of the message string. message the of segment each of the s the
. Increasing this delay will help host applications pro applications will host help delay this . Increasing Delay Setting
ParameterSelection canner . These two parameters are used to synchronize data communication when : 1) the 1) : when communication data synchronize to used are parameters two These . 51
; ; ;
then the scanner then the scanner then the scanner then the
will terminate will terminate will terminate will terminate cess the incoming data on time. on data incoming the cess e y agn hn dutn t adjusting when margin ty OptionCode F _ (2 digits) (2 digits) (2 digits) (2 DEFAULT FIN FIN FIN
ee two hese
Scanner Programming Manual . . . .
data transmission. If the NAK is received, received, is NAK the If transmission. data Wh doesn COM USB NAK
Enable: There Disable: There ACK i function this enable you When mode. batch for available isnot function This Ifyouprogram the data. program you If times. three are counts retry default The time preset the If 2) t within received is counts retry NAK preset After 1) conditions: two following under data the discards and indication error issues an th discard and indication error an issue will the to up host the from response NAK a expects scanner the data, transmitting After en the FamilyCode Selection Retry Count Retry
Indication: Indication: Handshaking Protocol
NAK Retry Count ACK/NAK Software Handshaking Software ACK/NAK ACK Indication PROGRAM ’ s a specific LED and beeping indication for this setting. setting. this for indication beeping and LED specific s a ’ s ’ neither LED nor LED neither t support RTS/ t support
- out is up but isup out “ 255 times 255
CTS handshaking protocol CTS handshaking
the preset NAK retry counts have NAKcounts preset retry the
beeping indication for this setting. this for indication beeping ”
, the scanner can receive receive can scanner , the Scanner P.C e data. When a NAK is received, the scanner transmits the same data again and waits for either an ACK or NAK. The scanner scanner The NAK. or ACK an either for waits and again data same the transmits scanner the received, is NAK a When data. e SS SS SS SS SS SS SS SS SS SS
option is selected, the the isselected, option
will re will he preset serial response time response serial preset he Xon/Xoff (software handshakin Xon/Xoff (software handshaking) (software ACK/NAK handshaking) RTS/CTS (hardware mode) running (free None EnableACK Indication Indication Disable ACK Enable Disable 0~ 3 times 255 - “ send the da the send 0 time 0
. times
ACK Time ACK Time unlimited
”
, the scanner won scanner the ,
n
Protocol ’ Scanner oet h n. end. the to t come ta until receiving ACK. receiving until ta SerialInterface Control - - out Indication out Indication
NAKs from the host within the within the host the NAKs from
n on waits for an an for waits
ParameterSelection , ACK/NAK, - - line mode, the out the line mode, ’ g) out. t resend the data to the host when the scanner the when host the to data the resend t
pr
eset eset 52
ACK ’
“ Serial Response Time Response Serial
(acknowledge) or or (acknowledge)
Setting - of pre - range function will be disable automatically. will disable be function range - set serial response time response serial set
NAK - out
(not acknowledge) from the host computer after each each after computer host the from acknowledge) (not ” . If the scanner doesn scanner the If .
- receives a NAK. The scanner will discard discard will scanner The NAK. a receives ou t.
’ t get a response, the scanner scanner the response, a get t OptionCode F
_ ( DEFAULT 3
digits FIN 3 2 1 0 3 2 1 0
)
Scanner Programming Manual . .
The The the When communication. This option is very helpful to ensure the reliability of data communication. data of reliability the ensure to helpful isvery option This communication. FamilyCode Selection Serial Serial Response Time
Baud Rate (BPS) RTS/CTS Hardware Handshaking Hardware RTS/CTS Response Data Frame PROGRAM
Time
- out
- out ispre a
- defined delay time for for time delay defined P.C S SS SS SS SS SS SS SS SS SS SS SS SS SS S SS SS SS
S S option is selected, the the isselected, option
Response 7, Odd, 1 Odd, 7, 2 None, 8, 1 Mark, 8, Space,1 8, Even,8, 1 8, 1 None, 8, BPS 9600 BPS 19.2K BPS 38.4K 800 mseconds 200 None 7, Even,7, 1 BPS 4800 2 seconds 1 second mseconds 500
Odd, 1 Odd, mseconds
Scanner
T
ime RTS SerialInterf
to wait for hands wait for to
- (reques o ut Setting ParameterSelection t to send) and and send) t to haking, acknowledgment or non or acknowledgment haking, 53
aceControl ,
Baud Rate 7, Space,2 7, Even,7, 2 2 Odd, 7, 2 None, 7, 1 Mark, 7, Space,1 7, BPS 115.2K BPS 57.6K 10 8 5 seconds 4 7, Mark, 2 Mark, 7, BPS 1200 BPS 2400 15 3 CTS
seconds seconds seconds
seconds seconds
(clear to send) signals will be issued before normal data normal before issued will signals be send) to (clear
, Frame Data
- acknowledgment from the host compute host the from acknowledgment OptionCode 7 6 5 4 3 2 1 0 2 1 0 5 4 3 2 1 0 3
F_ DEFAULT
D C r E B A B A 9 8 9 8 5 4 9 8 7 6
Scanner Programming Manual FamilyCode Selection
Narrow/Wide Ratio
Initial Signal State Output Polar Module Time Margin Time PROGRAM
ity
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Output Polarity,S 1:3 1:2.5 1:2 Lon Medium Short msec 100 short Extremely msec. 50 msec. 30 msec. 25 msec. 20 msec. 15 msec. 10 (0Vdc) Level Low (5Vdc) High Level Space) on level Bar (high on level(0Vdc) Low Space) on level (low Bar on (5Vdc) High level Time base of minimum narrow bar narrow minimum of base Time transmission data before Delay time initi the Determine space. and bar both for level voltage output the Determine
g
Wand
.
al state of output voltage level. voltage output of al state /Laser /Laser ignal State, Margin/Moduleignal Time ParameterSelection Emulation Control Emulation
54
OptionCode F_ DEFAULT 2 1 0 3 2 1 6 0 5 4 3 2 1 0 1 0 1 0
Scanner Programming Manual . . . .
Presentation Background Lighting
detect the motion of scene. of motion the detect s the on turn to function this enable can you dark, or dim is light ambient the When mode. presentation Present The Hand Hand FamilyCode Selection
Illumination Control Control Illumination - -
Free Mode: Mode: Free Mode: Held
Presentation Control Illumination Control to Bcgon Lgtn Control: Lighting Background ation
O peration Mode PROGRAM
Presentation mode, Force mode, Force mode, Presentation Low power mode, Trigger mode, Alternative mode, Toggle mode, Level mode, Multiple read mode read Multiple mode, Level mode, Toggle mode, Alternative mode, mode,Trigger power Low
is only available for hand for is onlyavailable
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Y
u a eal o dsbe rsnain akrud ihig f h sanr codn t te min lgt odto in condition light ambient the to according scanner the of lighting background presentation disable or enable can ou Operation Operation LEDs On LEDs Off Enable Disable mode Force Dia reading) (Repeat mode Toggle on) power (Continued mode Force off) power (Periodic mode Alternative detection) (Auto mode Presentation triggering) (External mode Trigger triggering) power (Low Power mode Low Presentation Mode Read Multiple off) power (Auto mode Level -
held mode held gnostic mode (Test reading) (Test mode gnostic
.
mode mode , Presentation and
OperationControl
ParameterSelection
55
Illumination Control canner
’ s LED illumination at a dim level. This is helpful for scanner to scanner for is helpful level. This dim a at illumination s LED
OptionCode F_ DEFAULT 0 0 1 1 1 0 8 7 6 5 4 3 2 1 0
Scanner Programming Manual . .
The The the delay time, the aiming the time, delay the inactivity of seconds 2 After Delay Aim FamilyCode Selection
Delay Aiming Time Aiming Delay Control Aiming Decode Aiming
Aim PROGRAM ing ing
Time
Control is only available for trigger mode trigger for available is only - out Control - out Control
light ,
Control the aiming the will will
be on
is only available for trigger mode. You can u You can mode. trigger for is onlyavailable
light , but the LED, butthe P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
will be be will Aiming Control,
Enablein Hand Disable inHand 4 secs 3 secs 2 secs secs 1.5 1 sec ms 800 ms 400 ms 200 Delay Aim Aiming Intelligent Aiming Regular Enable Disable shut off. shut .
illumination In
Intelligent Aiming Intelligent . . .
in Hand in Hand .
Delay ing
Control Control
won’t
- - Aim - - Free mode mode Free Held mode Held remd mode Free Held mode Held
Delay ing
be OperationControl
, Control allows a delay time for the operator to aim the scanner before the the before scanner the aim to operator the for time delay a allows Control
turn the aiming the
ParameterSelection ed AimingAiming &Decode Control
se
on until the delay time is time delay the until on
Delay Aiming Time Aiming Delay
light is turned on is turned light 56
- when the scanner is lifted. A trigger pull activates decod activates pull trigger A is lifted. scanner the when out Control Control out
up
.
to set the the set to delay time delay
.
OptionCode F_ DEFAULT image 3 2 1 0 7 6 5 4 3 2 1 0 2 1 0
is taken. During During taken. is ing
process
. Scanner Programming Manual . .
Unique Bar Unique Center held without release). This prevents the output of repeat data in case a barcode is accidentally read multiple times multiple read accidentally mode is barcode a case in data repeat of output the prevents This release). without held FamilyCode Selec Unique Barc
only Alignment: Alignment:
Center Alignment PROGRAM .
c ode Reporting: ode ode Reporting
When
this function is this function
tion When this function is enabled, enabled, is function this When
enabled, the scanner only decodes barcode decodes only scanner the enabled, P.C SS SS SS SS SS SS
Enable Disable Enablein Hand Disable Enablein Hand Disable inHand
Unique Bar Code Reporting, Code Unique Bar ReadingBatch Center AlignmentCenter
in Hand
the scanner will only will scanner the - - - - Held Mode Held free Mode free Held Mode Held Free Mode Mode Free OperationControl
ParameterSelection , Unique Ba ,
output
(s)
around 57
data from each barcode once during a scanning cycle (trigger key presse key (trigger cycle scanning a during once barcode each from data
aim r ing line. ing c ode Reportingode
during the same scanning cycle scanning same the during
OptionCode F_ DEFAULT . For 1 0 3 2 1 0
Multiple Read Multiple
d and d
Scanner Programming Manual .
ability might be impacted. be ability might distance reading the to impact may this But move. the on tolerance motion I tolerance. motion higher means lever higher The level. higher select you when tolerance motion better have will scanner The FamilyCode Selection
Motion Control PROGRAM
P.C SS SS SS SS
Level 4 Level 3 Level 2 Level Level 1 Level
OperationControl
Motion Control and the readability of high of readability the and Paramet 58
erSelection
- dense barcodes. If the the If barcodes. dense
t’s suitable for application whic application for suitable t’s ambient light is dim or dark or dim is light ambient OptionCode F_ DEFAULT 3 2 1 0
h needs higher higher needs h , the scanning scanning the ,
Scanner Programming Manual
.
Batch Reading Batch - - - - Rule Reading Batch - - - barcodes. those of order scanned the Rule” regardless Reading “Batch in whichisdefined sequence preset the to according codes bar all if only indication
FamilyCode Selection Batch Reading Batch Reading Where: [Captrue structure: Element Where [Element [n] Rule Syntax: Batch Reading becancelled. Rule will BatchReading preset “None”, the scan you When Scan the Note: 5. 4. 3. 2. 1. Torule Reading Batch the set Batch Reading
Sca Scan the Use the Scan the Scan the
[Capture
Code Capture find Please Length: 2 byte Note: 99 is the universal number, universal isthe 99 Note: indica n the
Batch Reading n
PROGRAM 16. to isup elements of number rule. overall The inthe elements of number is the ID Hex value] [Code length] [Character match [Character length] [Code value] ID Hex . Option Code Code Option
: When this function is enabled, you isenabled, function this : When END FIN Reading Batch PROGRAM
1] FF [Element 2] FF [Element 3] FF …[Element n] FF FF …[Element 3] 2] [Element [Element FF 1] FF ID Hex value] ID Hex
function is function
is not available when when available is not ABORT and ABORT
symbol.
symbol to save your Batch Reading rule. Batch Reading your save to symbol :
symbol.
to define the preset Batch Reading rule. BatchReading preset the define to ID hex value from from value hex ID only only set set
symbol (Family Code). (Family symbol
END
by the the by available available
symbol to exit without saving any Batch Reading rule setting. rule Batch Reading any saving exit without to symbol Multi “ Batch Reading Reading Batch P.C Trigger Mode Trigger SS ple Read Mode Read ple
Symbology ID TableID Symbology ting allsymbologies. ting
can scan multiple barcodes one by one continuously upon one trigger event. event. trigger one upon continuously one by one barcodes multiple scan can Batch Reading rule input rule Batch Reading None Unique Bar Code Reporting, Code Unique Bar ReadingBatch
R .
ule
” are read. Otherwise, the scanner reports an error beep and indication. The indication. and beep error an reports scanner the Otherwise, read. are ”
(es)] or or Center Alignment
in appendix OperationControl
Batch ReadingBatch (
01 ParameterSelection - . 16 rules 16 L ocate the Hex value for th for value Hex the ocate
is turned on. is turned 59 )
FF
indicates the the indicates
e
e symbology and scan and symbology nd ofone element.
The scanner reports a good read beep and and beep read good a reports scanner The
the 2 digit h digit 2 the
scanned data will be transmitted transmitted be will data scanned OptionCode ex values from the the from values ex F_ [Rules] [FIN] [Rules] DEFAULT [FIN]
Option Option
Scanner Programming Manual -
128 Code you but codes, bar 93 Code and 128, Code 39, Code scanning are you this example, In example rule Reading Batch
[Character match [Character Note: length] [Code String st the from counted are which characters 4 to up match You can characters. ASCII the represents that combination alphanumeric to refer can You Length: 2 Scanne Postamble, Preamble, programmed Length: 4 byte Note: Note: Specify what length of data output will be acceptable for this symbology. this for acceptable willWhen be output data of length what Specify
4 .
0 characters is entered as 00 as isentered 0 characters
When setting the matched character(s), you must match the content of the whole Data String, including the programmed Preamble programmed the including String, Data whole the of content the match must you character(s), matched the setting When - Data Length, Prefix/Suffi Length, Data
- Code 39 Code 8 byte
HEX/AS ] -
Code 93 93 Code
I Rfrne Table Reference CII
Symbol ID OR Symbol defined. had AIM IDifyou 4 0 ; 9999 is a universal number, indicating all lengths. number, isauniversal 9999 alllengths. indicating d Data Length, Prefix/Suffix SymbolID Length, d Data to
find the Hex value that represents the character(s) you want to match. Use the the Use match. to want you character(s) the represents that value Hex the find A
C B F - F - - CODE128 CODE39 CODE93
is the universal character, universal is the allcharacters. indicating you you 60 or or
calculat
would like to output the data in following sequence: sequence: infollowing data the output like to would AIM ID
e
. the length, you must must you length, the Scan the four digit data length from the the from length data digit four Scan the consider the whole d whole the consider
art c art Option Code Option ata haracter of the whole the of haracter Option Code Code Option
s tring , Postamble, Sca Postamble, ,
which include which .
o cn the scan to nned nned s Data Data
the Scanner Programming Manual line: Youcommand following with the rule Batch Reading the up set would y If length. example’s length. the of part D as defined Scanned had Postamble, you Preamble, if ID programmed AIM the OR count ID Symbol to have would you lengths, specific using example previous the program To T [END] [FIN] [0301999941FF07999942FF09999943FF] Reading] [Batch [PROGRAM] Y [PROGRAM] [Batch Reading] [0301001041FF070009FF09000943FF] [FIN] [END] [FIN] [0301001041FF070009FF09000943FF] Reading] [Batch [PROGRAM] ou would set up the Batch Reading rule with the following command line: command following with the rule Batch Reading the up set would ou he breakdown of the command line is shown below: isshown line command the of breakdown he FF 43 9999 09 FF 42 9999 07 FF 41 9999 01 03
End of third code third End of S alllengths = 9999 93, Code for match must that length Code 93 Code of identifier Code code second End of S that length Code 39 Code of identifier Code code first End of “A” = 41h 128, Code for match character Start alllengths = 9999 128, Code for match must that length Code 128 Code of identifier Code o number The tart character match for Code for match character tart = 42h 39, Code for match must that character tart f elements in the overall rule overall inthe f elements
must match for Code 39, 9999 = alllengths = 9999 39, Code for match must
93, 43h=
“
C ”
ou enable the Suffix Symbol ID of symbology, you would add one character to the previous previous the to character one add would you symbology, of ID Symbol Suffix the enable ou “ B
”
61
ata Length, Prefix/Suffix Prefix/Suffix Length, ata Scanner Programming Manual -
of Structure match(e [Character the If Note: below: isshown line command the of breakdown The
(RS232/USB COM FF 43 0009 09 FF 0009 07 FF 41 0010 01 03 interface) 1 character1
STX
Data String Data
1 -
Preamble 15 characters Code identifier of Code 128 Code of identifier Code rule overall inthe elements of number The End of third code third End of S C C 93 Code of identifier Code Also indicate character, matched Universal allcharacter indicating B C 39 Code of identifier Code code first End of ma character Start A C tart character match for Code 93, 43h = = 43h 93, Code for match character tart - - - 93 Code for match must that length ode 39 Code for match must that length ode 128 Code for match must that length ode CODE39 sample length (8) plus Suffix Symbol ID (1) = 9 = SuffixSymbol ID(1) plus (8) length sample CODE39 10 = SuffixSymbol ID(1) plus (9) length sample CODE128 CODE93 sample length (8) plus Suffix Symbol ID (1) = 9 = SuffixSymbol ID(1) plus (8) length sample CODE93
s)] is set to “FF”, the following “FF” which indicated the end of the code was not need to set. to need wasnot code the of end the which indicated “FF” following the “FF”, to isset s)]
end ofsecond code Scanned Data
Length
2 - tch for Code 128, 41h = “A” = 41h 128, Code for tch 4 digits4
Prefix AIM Symbol ID Prefix 1 or characters1 3 Symbol Or
“
C
”
ID
Scanned Data modified 62 by by DataWiz
Variable
length ard
Suffix AIM Symbol ID 1 or characters1 3 Suffix Symbol Or
ID
1
Postamble - 15 characters
(RS232/USB COM interface) 1 character1 ETX
Scanner Programming Manual FamilyCode Selection
Good Read Indicator Buzzer Tone Adjust Power OnIndicator
Vibrator PROGRAM
Control
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS
F560 series scanner doesn scanner series F560 Enable Disable Enable Disable LED flash off) Disable (LED tone Buzzer tone Buzzer tone Buzzer tone Buzzer tone Buzzer Optional function Optional LED No power Power steady steady -
on beep
Buzzer, Indica -
on beep
on - – – – –
extremely high extremely h medium low mute
igh
is
(Frequency 1.2 (Frequency
(Frequency 2.81 (Frequency
only available for vibrator model. vibrator for available only OperationControl
(Frequency 2. (Frequency ’ t support this function. this t support ParameterSelection
(Frequency 2.93 (Frequency tor & 0
kHz)
kHz) 63 70
Vibrator
kHz)
kHz)
Control
OptionCode F_ DEFAULT 1 0 1 0 2 1 0 6 5 4 3 2 1 0
Scanner Programming Manual FamilyCode Selection
Buzze PROGRAM r Volume
P.C SS SS SS
High Medium Low
OperationControl
Buzzer Volume ParameterSelection 64
OptionCode F_ DEFAULT 2 1 0
Scanner Programming Manual .
The The 1D Barcode FamilyCode Selection Redundancy
Redundancy PROGRAM Inverse Reading
is the number of times the same bar code label has to be decoded before it is transmitted. it before decoded be to has label code bar same the times of number is the
P.C SS SS SS SS SS SS SS SS
Enable Disable Level L Level Level Level To prevent potential miss reading. miss potential prevent To None evel evel
Redundancy
5 4 3 2 1
OperationControl
& 1D Code Inverse Reading & 1D ParameterSelection
65
OptionCode F_ DEFAULT 1 0 5 4 3 2 1 0
Scanner Programming Manual . .
This The will not allow reading of the same bar code twice code bar same the of reading will allow not FamilyCode Selection
Reread Delay Reread Good Read Good (Double
Good Read Delay Reread Delay PROGRAM Sc
Delay an
(Double Scan Verification) Scan (Double
Verification)
is
the minimum amount of time before the imager can read another bar code. bar another read can imager the before time of amount minimum the
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS
is designed to inhibit to designed is .
2 sec. sec. 1.5 1 sec. msec. 500 msec. 200 None Long ti out time Medium out time Short out time Immediate Disable 3 sec. verification Force
Reread
me out me
Delay &
Scanner Operat
ParameterSelection from reading the same bar code code bar same the reading from
Good Read Delay Read Good ionControl 66
Control label twice in pre in twice label
- defined short duration. Force Verification Verification Force duration. short defined OptionCode F_ DEFAULT 6 5 4 3 2 1 0 5 4 3 2 1 0
Scanner Programming Manual . . .
p The trigger when The pre till the The ower ower Time Delay to LowPower Mode FamilyCode Selection
Light Source On T On Source Light Time Delay to Low Power Mode Power Low to Delay Time Presentation Mode Presentation
you m Light Source On Time operation Hands Free Time Good Read ode.
- press the trigger the press isup. time on source light defined
PROGRAM ) ,
the imager the
Duration , ime
Force Mode Force
. -
out You can You is a pre a is
will
revert
-
defined
remain the scanner the remain and
sets the time for scanner to enter low power mode after any scanni any after mode power low enter to scanner for time the sets to the original hands free mode free hands to theoriginal Flash Mode Mode Flash P.C
SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
You can adjust this parameter to meet your own application req application own your meet to parameter this adjust You can light source light
9 secs 7 secs 5 secs 3 secs 1 sec short Extremely Long Medium Short Extre Long Medium Short long Extremely Long Medium Short I Extremely Disable mmediate mmediate
Lig are referred to as “hands free” mode. mode. free” “hands as to referred are
long mely
time out counter for counter out time in manual trigger mode by setti by mode trigger manual in
ht Source On Time, Hands Freeht Time,TimeHands SourceOn
long
.
OperationControl
Alternative Mode, Presentation Mode and Level Mode Level and Mode Presentation Mode, Alternative ParameterSelection 67 ng the the ng
The hands free mode will be automatically changed to manual trigger mode mode trigger manual to changed automatically be will mode free hands The Hands Free Time Free Hands
ng activity ng uirement.
- Out . This setting is only available for the scanner is in l in is scanner the for available only is setting This .
- out . Once the time the Once .
.
The scanner keeps the light source on on source light the keeps scanner The - out duration duration OptionCode F_ is DEFAULT up 5 4 3 2 1 0 4 3 2 1 0 4 3 2 1 0 3 2 1 0
(if there (if
’
s no
any any ow Scanner Programming Manual .
When enabling When The presentation sensitivity is used to configure the sensitivity level when the scanner is set as set is scanner the when level sensitivity the configure to used is sensitivity presentation The the ba FamilyCode Selection Pr Presentation Sensitivity
rcode. esentation Auto
PROGRAM
the
Presentation
- sense
Auto
- sense, sense, P.C SS SS SS SS SS SS SS SS SS the scanner can be be can switched scanner the
Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Level Enable Disable
Presentation
& Sensitivity Settings OperationControl from
ParameterSelection Auto
hand - h - eld Sense Sense 68
and hand presentation & Sensitivity - free free
scanning automatically when working with the with working when automatically scanning
mode. mode. T he higher lever means higher sensitivity for detecting for sensitivity higher means lever higher he
OptionCode F_ DEFAULT
s 6 5 4 3 2 1 0 1 0 tand.
Scanner Programming Manual . . . . .
If you have any problem to use DataWizard, please refer to following pages for details and consult your local your consult and details for pages following to refer please DataWizard, use to problem any have If you “ all that Please note ease. A on system, this by used resources the to Due scann of transmission the arrange to you as: ways many in transmissions the prior data scanned the process can you DataWizard Condensed Version DataWizard Version Condensed - Symbology ID Transmission screen FamilyCode Selection Data Length Transmission
on
is the most powerful, Artificial powerful, most the is
PROGRAM Postamble Windows Preamble
Character 2000
/
X ” input should be referred to the the to referred be should ” input P
/ 7
is provided by each each by provided is
ed datato any specific withoutformat software modification. - P.C Full Intelligence based data editing expert system provided specially for the the for specially provided system expert editing data based Intelligence MS MS SS SS SS SS SS SS SS SS SS SS SS
Preamble,Postamble, LengthData &Symbol Trans. ID
-
feature DataWizard feature
Enable both prefix and suffix suffix and prefix Enableboth Enablesuffix symbolo AIM Enableprefix transmission ID symbology suffix and prefix Enableboth transmission ID symbology Enablesuffix IDtransmission symbology Enableprefix IDtransmission Disable symbology Enable2 Disable 1 None 1 None Maximum 15 Maximum 15 Maximum - - 15 characters 15 characters 15 Scanner ~4 ASCII/HEX Table ASCII/HEX
digits data length transmis length digits data - - Condensed DataWizard Condensed AIM character input; scan “FIN” to terminate this selection. this terminate “FIN” to scan input; character “FIN” to scan input; character
series. Through this menu, the condensed DataWizard can be utilized via bar code menu readings with with readings menu code bar via utilized be can DataWizard condensed the menu, this Through series.
is only supported by supported only is
symbology ID symbology Insert gy ID transmission gy ID ParameterSelection
AIM li sted in Appendix to find matched HEX value. matched find to Appendix in sted
, transmission
Delete symbology ID symbology 69 sion PowerTool
,
Match
terminate this selection. this terminate
transmission ,
Verify . Through the PowerTool, all settings and configurations can be can configurations and settings all PowerTool, the Through . ,
Scanner
Replace
S
canner vendor or our web site for any assistance. any site for web our or vendor ,
Reorganize
family bar code readers. Through DataWizard, DataWizard, Through readers. code bar family
, and and , Repeat Transmission Repeat OptionCode F [00 [00 _ DEFAULT - - 7 7 FIN FIN F F 6 5 4 3 2 1 0 1 0 ], [FIN] ], [FIN] ],
. It will help help will It .
done
Scanner Programming Manual . . . .
While the Data Formatter is enabled, it arranges only scanned data without without data Suffix scanned only arranges it enabled, is Formatter Data the While symbolo The Please note that all “ all that Please note “ the Regarding FamilyCode Selection aa Formatter Data . All of the above programmable parameters perform the same function depending on your setting. your on depending same the function perform parameters programmable above . All ofthe
gies for formatter control, and provides provides and control, formatter gies for Formatter Control
2nd Insertion 3rd Insertion 4th Insertion 1st Insertion PROGRAM Bar Code Selection Code Bar
Character
s sd o dt h sand a dt pir o rnmtig h dt t te ot optr o trias I alw yu o sele to you allows It terminals. or computers host the to data the transmitting to prior data raw scanned the edit to used is
” input should be referred to the to referred be should ” input
” “ and P.C Position Calculation Position MS MS DS DS DS DS SS SS SS SS SS
Multiple Position Insertion Position Multiple Enable Disable Enable Disable Enable Disable Enable Disable symbologies code Selectall bar symbology code bar Selectone Disable 2 2 2 2 - - - - digits identified pos digits identified characters insertion 3 max. position; digits identified characters insertion 3 max. position; digits identified characters insertion 3 max. position; digits identified
ASCII/HEX Table ASCII/HEX ” of data formatter, please refer to pag to refer please formatter, ” data of ParameterSelection CondensedDataWizard
Data FormatterData Set ition; max. 3 insertion characters insertion 3 max. ition;
and Preamble
Multiple Character Insertion Multiple
listed in Appendix to find matched HEXvalue. matched find to Appendix listed in
70 , Postamble
ting , e
STX
7
5
for details. for , E
TX position. identified inthe characters) three (max , Data Length Data OptionCode
(2 digits) (2 digits) (2 ( digits) (2 digits) (2 2 digits) position position position position FIN FIN FIN FIN FIN 00
,
Prefix/Suffix Symbology ID Symbology Prefix/Suffix
2nd [1 [1 [1 [1 automatic terminat automatic termination automatic - - - - 3 characters], [FIN] 3 characters], [FIN] 3 characters], [FIN] 3 characters], [FIN] 3 characters], F
OptionCode _ DEFAULT t eie br code bar desired ct
or ion
Record Record
Scanner Programming Manual . . . . .
Scanner must data All Please note that all “ all that Please note “ the Regarding without data scanned only checks Verifier Data The The FamilyCode Selection Data Verifier Data 2nd I 3rd I 1st I Identified Data Length
will not transmit the data to the host computers or terminals, but will instead issue will instead but terminals, or computers host the to data the will transmit not
Verifier Control de de de PROGRAM
n n n conform conform tified Character tified Character tified Character Bar Code Selection Code Bar
is used to provide to is used
Character to the
Identified Bar Code Symbologies Code Bar Identified ” input should be referred to the the to referred be should ” input
” “ and advanced verification for error for verification advanced P.C Position Calculation Position MS MS DS DS DS DS SS SS SS SS SS
2 Enable Disable 2 Enable Disable 2 Enable Disable Determ Enable Disable symbologies code Selectall bar symbology code bar Selectone Disable
- - - Preamble digits checking position; 1 identified character identified 1 position; digits checking character identified 1 position; digits checking character identified 1 position; digits checking
ine the identified data length for verification. for length data identified the ine , ASCII/HEX Table ASCII/HEX Postamble ” of , Identified Data Length Data Identified - free scanning and to work as an asan work to and scanning free ParameterSe Data Verifier Data CondensedDataWizard
Data Data Verifier Setting , STX ,
, please refer to page to refer , please listed ETX
, lection Data Le Data in Appendix to find matched HEXvalue. matched find to Appendix in 71
, and one to three to one and , 3 long beeps 3 long
ngth
Embedded Data Transmitting Filter Transmitting Data Embedded ,
Prefix/Suffix Symbology ID Symbology Prefix/Suffix
7
5 for verification error and and error verification for
for details. for
Identified Characters Identified
OptionCode (2 digits) (2 digits) (2 digits) (2 digits) (2 digits) (2 position position position FIN FIN FIN FIN FIN 00
skip
or
in the checking position. Other position. checking the in
Record Suffix Record
the scanned data. scanned the
.
2nd automatic termination automatic termination automatic F
OptionCode _ .
DEFAULT [00 [00 [00
- - -
7F] 7F] 7F]
wise, the the wise,
Scanner Programming Manual . . . .
arranges only scanned data without data scanned only arranges confor must data All provides and control, replacer for symbologies The Please note that all “ all that Please note “ the Regarding FamilyCode Selection aa Replacer Data
2nd Replacement
3rd Replacement Replacer Control 1st Replacement PROGRAM Bar Code Selection Code Bar
m to the to m Character s sd o edi to used is
Identified Bar Code Symbologies Code Bar Identified ” input should be referred to the the to referred be should ” input
te cne rw aa ro t tasitn te aa o h hs cmues r emnl. t los o t slc dsrd bar desired select to you allows It terminals. or computers host the to data the transmitting to prior data raw scanned the t Preamble ” “ and P.C Position Calculation Position MS MS DS DS DS SS SS SS SS
, Multiple Position Repl Position Multiple
Postamble Enable Disable Enable Disable Enable Disable Sel symbology code bar Selectone Disable 2 2 2 - - - digits identified position; 1 replacement character 1 replacement position; digits identified character 1 replacement position; digits identified character 1 replacement position; digits identified ect all bar code symbologies code all bar ect
, STX ASCII/HEX Table ASCII/HEX ” of Data Replacer, please refer to page to refer please ” Replacer, Data of , , and one to three to one and , ETX ParameterSelection CondensedDataWizard , a
Data ReplacerData Setting Data Length Data cement
in the identified position. identified in the
listed in Appendix to find mat find to Appendix listed in
Identified Characters Identified , Prefix/Suffix Symbology ID Symbology Prefix/Suffix 72
7 5
in the identified position identified the in for details. for c
h ed HEXval ed
or OptionCode
Record Suffix Record
(2 digits) (2 digits) (2 digits) (2 digits) (2 position position position ue. FIN FIN FIN FIN 00
. W . .
hile the Data Replacer is enabled, it enabled, is Replacer Data the hile 2nd automatic termination automatic termination automatic F
OptionCode _ DEFAULT [00 [00 [00 - - -
7F] 7F] 7F]
code code
Scanner Programming Manual . . . .
While the Data Organizer is enabled, it arranges only scanned data without without data Suffix scanned only arranges it enabled, is Organizer Data the While including organizer for symbologies The Please note that all “ all that Please note Reg FamilyCode Selection a aa Organizer Data Include/Exclude Control rding the “ the rding .
Organizer Control
2nd Organization 1st Organization
or or PROGRAM excluding Bar Code Selection Code Bar
Character
s sd o dt h sand a dt pir o rnmtig h dt t te ot optr o trias I alw yu o sele to you allows It terminals. or computers host the to data the transmitting to prior data raw scanned the edit to used is
the data of identification position. Please refer to the application example listed inp listed totheapplication example refer the data Please of identification position.
control, and provides maximum two identified positions to send the data the send to positions identified two maximum provides and control,
” input should be referred to the the to referred be should ” input
” “ and P.C Position Calculation Position MS MS DS DS DS SS SS SS SS
Disable position identified of data the included data Transmitted position identified of data the excluded data Transmitted setting transmission data Forward/backward 2 Enable Disable Enable Disable symbologies code Selectall bar symbology code bar Selectone Forward/backward data transmission setting transmission data Forward/backward 2 - - digits identified position; digits identified digits identified position; position; digits identified
ASCII/HEX Table ASCII/HEX ” Or Data of ParameterSelection CondensedDataWizard
Data Data Organizer Setting ganizer, please refer to page to refer please ganizer,
Preamble .
73 , Postamble
forward
, STX
7
5 ag
, f or or details. or e 7 ETX
backward 5
, for details. for Data Length Data OptionCode
(2 digits) (2 digits) (2 digits) (2 direction direction . It also allows you to control the transmitted data transmitted the control to you allows also It . position position FIN FIN FIN
00 1 0
,
Prefix/Suffix Symbology ID Symbology Prefix/Suffix
2nd OptionCode A A utomatic termination utomatic termination utomatic F 0 (Forward) 0 (Forward) 0 (Forward) 1 (Backward) 1 (Backward) _ DEFAULT t eie br code bar desired ct
or Record Record
Scanner Programming Manual select oneselect of the option code listedbelow. pre your please code, meet bar type one only select to to want you If format. data incoming all arrange will tr advanced forarrangement. youIf scan“00” to select all types, the DataWizard Condensed use to symbologies code bar of types all or one select can You CodeSymbology a Bar Select
Trioptic Code 32 Code 39 Codabar/NW EAN EAN EAN EAN EAN EAN UPC UPC UPC UPC UPC UPC GS1 Code 128
------128 8 13 13 13 8 8 E with 5 E with 2 E E with 5 A with 2 A A
with with 2 supplement
Code 39 with 5 supplement with 2 supple
5 supplement - 7 supplement supplement supplement supplement
ment
1D Bar Code Symbology Code 1D Bar 47 37 07 06 45 35 05 44 34 04 43 33 03 42 32 02 31 01
Code 49 Code 16K Codablock Micro PDF417 PDF417 Coupon Code IATA Composite Codes GS1 DataBar Expanded GS1 DataBar Limited GS1 DataBar Telepen UK/Plessey MSI/Plessey Cod Code 93 Standard/Industrial 2 of 5 German Code Postal China Postal Code Interleaved2 of 5 Matrix 2 of 5 e 11
F
ansmission Scanner - defined 20 19 18 25 17 16 15 24 23 22 14 13 12 11 10 09 08 68 58 48 38
74
followingto calculate the actualposition foridentification. thereIf is a 1 followingto calculate the actualposition forinsertion: thereIf is a 5 [Data Formatter] Posi GS1 DataMatrix DataMatrix MicroQR QR Code Intelligent barcode Mail British Post Australian Post KoreaCode Post 00 00 [Data Verifier,Data Replacer,Data Organizer] X
tion Calculation tion 01
X X
C
ode
02 01
X
- 1 characterinput data string, refer to the - character string,data please refer to the 03
X X
2D Bar Code Symbology Code 2D Bar 04 02 X
Postal Code Postal 05
X X B B B A5 A A A 21
3 1 0 1 0 0
06 03 X Postnet Planet Code KIX Post Japanese Post Chinese Code Sensible Aztec MaxiCode
Code 07 X X
08 04 X
09 X X
10 05 X
B B B B A A A
8 6 5 4 4 3 2
Scanner Programming Manual ...... followingyou for without softwaremodification: 4 and number inclu 16 a is label code bar your If Example Application
ActualOutput : TestBar Code : Theunitprice outputshould skip be Theserial number output should led be with “SN”. “A”. by it replaced and “9” skip should output code date The Threeoutputs with “TAB”suffix. Allow bar code output whose date code is leading with “9”. condensed the to Checkbar code is actually with 5 of 2 DataWizard. Interleaved only Apply e te nomto o 6 of information the des
- digit unit price, you want the the want you price, unit digit
A81025[TAB]SN123456[TAB]76[TAB] 9 81 0 2 5
- - 12 3 4 5 6 ii dt cd, 6 code, date digit digit Interleaved 2 of 5 which 5 of 2 Interleaved digit
16 - digitlength. ped the first2 digits.
98 7 6 Scanner
- ii serial digit
do the do
75
. . [Data Verifier] Procedure Programming . . . [Data Formatter] . .
selection. “ scan must “ to position identified the set and Insertion” “3rd Scan selection. “ scan must “ to position identified the set and Insertion” “2nd Scan TAB), “ to “ position identified the set and Insertion” 1st Scan to “ Co “Formatter Scan (HexCode9). of positionto “ identified the set and Character” Identified “1st Scan to length “ the set and Length” Data “Identified Scan “ symbology code bar set and Control”“Verifier Scan Scan“Program” to enter programming the mode. 16 12 06 16 4 8 ”, then inserted character to “ to character inserted then ”, “ to character inserted then ”, “ to characters inserted then ”, 4 ”. ”(Interleaved 2 of5). 8
”. 53
”(Hex Code of S), “
00
FIN FIN ”, then”, set identified the character to “
(iih co (Finish) ” this terminate to code (Finish) ” ntrol” and set bar code symbology code bar set and ntrol”
4E ”(Hex Code ofN). e o emnt this terminate to de 09 09 09 . ntefnl you final, the In ”. you final, the In ”. (e Cd of Code (Hex ”
39 to ” Scanner Programming Manual [Important Notice] . . . . [Data Organizer] . . [Data Replacer] via Data Formatter. set already you which data inserted the consider must you posit identified the set you when So Verifier the follow will DataWizard presetworking flowas below: Condensed that note Please
Scan“ “ to position identified the set and Organization” “2nd Scan “ to position identified the set and Organization” “1st Scan “ “Organizer Scan “ to position identified the set and Replacement” “1st Scan “ to symbology code bar set and Control” “Replacer Scan 17 16 4 00 4 8 8 ”, setthen data the transmission t ”, setthen data the transmission to “ ”. ”, then replaced characterto “ ”.
END
omte Formatter ” ” (Exit) to terminate programming. the
Control” and set bar code symbology to symbology code bar set and Control”
elcr Replacer
41 o i Dt Organizer, Data in ion ” ” (HexCode of A). o “
1 0 ”(backward). ”(forward). Organizer
76
Scanner Programming Manual
APPENDIX 77
Scanner Programming Manual Codabar Code 12 UPC UCCCoupon IATA Code 25 Code Family Code ] = Flag ] = Character EachAIM Code Identifiercontains the three Table ID Symbology
8
is transmittedis as Example: A EAN transmittedis as Example : A UPC UCCCoupon Code IATA German P China Postal Code Interleaved2 of 5 Matrix 2 of 5 Standard/Industrial 2 of 5 Codabar/NW GS1 Code 128 transmittedas Example: A UPC UPC UPC UPC UPC UPC UPC ------
128 E with 5 supp E with 2 supple. E E with 5 supple. A with 2 supple. A A Primary Format
ostal Codeostal
; - 7 ]E0
]E0 c = Code Character - - ]E0
13 9923456789019 +GS1 13 9923456789019 - A bar code 012345678950 with 012345678950 2is supplement12 A barcode A 512345678900 + GS1 + A 512345678900 012345678950
le.
512 9923456789019
345678900
V ]E Hex alue ]C1 15 68 58 48 38 08 06 31 01 43 33 42 32 1 3 2 Capture ]C1 12
81010123451297
81010123451297 Z
- 128 81010123451297 bar code bar81010123451297128 code - Char 128 81010123451297 bar81010123451297128 code ID ; M O D C K B E A L J I
.
m= M - characterstring Char Code Code
R C X X S E F I I
odifierCharacter .
AIM ID 1D Symbology ID Table ID 1D Symbology Modified Char
m m m m m 0 0 0 1 2 1 0 2 1 0
.
]cm 78 Remark: Above aregivent for examples Korea Post Codablock PDF417 Code 39 Composite GS1 DataBar Tel UK/Plessey MSI/Plessey Code 11 Code 93 EAN/JAN
Code Family Code
where: epen
KoreaCode Post Codablock F Micro PDF417 P Code 32 Code Trioptic 39 Code 39 Composite Code GS1 DataBar Expanded GS1 DataBar Limited GS1 Databar Telepen UK/Plessey MSI/Plessey Code 11 Code 93 transmittedas Example: A EAN/JAN EAN/JAN EAN/JAN EAN/JAN EAN/JAN EAN/JAN EAN/JAN DF417 Primary Format
------13 with 5 supple. 13 with 2 supple. 13 with 58 supple. with 28 supple. 8
]E4
49123562
-
8 bar code 49123562 with 491235628 5 code 12345 bar supplement is he transmissionhe ID. of AIM
]E2 Value 12345 Hex 21 18 25 17 37 47 07 24 23 22 14 13 12 11 10 09 44 34 04 45 35 05 Capture
Char
ID W G G R H N Y V X S P T F a
.
Char Code Code M O G H X A X A B P E E L e
.
AIM ID Modified Char
m m m m m m m m 0 0 0 0 2 1 0 2 1 4
.
Scanner Programming Manual Australian Post Sensible Chinese Aztec Code MaxiCode Data Matrix Code Micro QR QR Code Code Family Code
Australian Post Chinese Sensible Aztec Code MaxiCode GS1 Data Matrix Data Matrix Micro QR Code QR Code Primary Format
V Hex alue B0 A4 A3 A2 A5 A1 A0 Capture
Char
ID g e d b c f
.
Char Code Code Q U X d z
.
AIM ID 2D Symbology ID Table ID 2D Symbology Modified Char
m m m m 0 0
.
79 Postnet Planet Code KIX Post Post Japanese barcodeMail Intelligent British Post
Code Family Code
Postnet Planet Code KIX Post Japanese Post Intelligent barcode Mail British Post Primary Format
Value Hex B8 B6 B5 B4 B3 B1 Capture
Char
ID m o h k l j
.
Char Code Code X
.
AIM ID Modified Char
0 0 0 0 0 0
.
Scanner Programming Manual Keyboard Function Code Table Code Function Keyboard Spain Sweden Belgium StateUnited Country Thelast characterin the Ctrl columnOutput isvaried different for countries. OPQ C H Vcr P, oeok C APE n Pwra, n WS PC WYSE and PowerMac, and APPLE machines. PC, Notebook PC, Vectra HP PC, COMPAQ Function Keyboard above the to refer scanner.Please the by done ASCII Reserved input key function keyboard the Toemulate
No. 15 14 13 12 10 09 08 07 06 05 04 03 02 01 00 11
(refer ANSI ENQ SOH EOT ACK NUL ETX STX
BEL SO CR HT BS VT
FF LF SI
to Keyboard Layout) Keyboard to
- - - -
ASCII 0 0DH 0CH 0EH 0BH 0AH 0FH 09H 08H 07H 06H 05H 04H 03H 02H 01H 00H 0
–
31
characters, and also and characters, Key Funct Italy Denmark UK Switzerland BACK SPACEBACK ENTER (CR) ENTER CAPS LOCK RESERVED
NUM LOCK CTRL (Left) & Character & ALT (Left)
SHIFT
ESC TAB F6 F5 F4 F3 F2 F1
ion
- - - - the using content actual configure must user parameters, definable user for
Enable Ctrl Output Ctrl Ctrl + M + Ctrl Ctrl + O + Ctrl G + Ctrl Ctrl + N + Ctrl H + Ctrl D + Ctrl C + Ctrl Ctrl + B + Ctrl Ctrl + K + Ctrl E + Ctrl Ctrl + Ctrl A Ctrl + F + Ctrl Ctrl + L + Ctrl Ctrl + J + Ctrl Ctrl + @ + Ctrl Ctrl + I + Ctrl
the “Function Key Emulation”. Otherwise, the Ctrl ou Ctrl the Otherwise, Emulation”. Key “Function the
80 Norway Germany France
Code Table which is for IBM for TableCodeis which No.
31 30 29 2 27 26 25 24 23 22 21 20 19 18 17 16 8
- - = ANSI
CAN ESC SUB SYN NAK DC4 DC3 DC2 DC1 ETB DLE EM GS US RS FS
ASCII 1DH 1CH 1EH 1BH 1AH 1FH 19H 18H 17H 16H 15H 14H 13 12H 10H 11H
H
nacd r ul compatible fully or Enhanced PAGE (Edit) DOWN DEL (Edit) (Delete) Key Function INS (Insert) (Edit) INS (Insert) PAGE UP (Edit)
DOWN (Edit) RIGHT (Edit) HOME (Edit) PC/XT/AT,PS/VP,PS/2, LEFT (Edit) END (Edit) UP (Edit) F12 F10 F11 F9 F8 F7
t put will be will put Ctrl Output Ctrl *see note Ctrl + W + Ctrl Ctrl + Q + Ctrl Ctrl + U + Ctrl R + Ctrl Ctrl + Ctrl Y X + Ctrl V + Ctrl S + Ctrl P + Ctrl Ctrl + Z + Ctrl + Ctrl T Ctrl + 6 + Ctrl Ctrl + ] + Ctrl + Ctrl [ + Ctrl
\
Scanner Programming Manual Code Page Page Code
Hebrew Israel Hebrew Greece Greece German French Finnish English English English English English English English Estonian Dutch Danish Czech Cyrillic Croatia Catalan Bulgaria Baltic Arabic Arabic Albania
n
n
------
n -
Australia Philippines South United State New Zealand Canada United Kingdom
write Description
Africa
–
Table of Corresponding Languages Corresponding of Table
s
Code 1256 1255 1253 1251 1257 720 850 8 737 850 850 850 437 437 437 850 850 850 850 775 850 850 852 852 850 866 62
P age
Italian Icelandic Hungar Vietnamese Turk Thai Chinese (Simple) Chinese (Tradition) Swed Spanish Slovenia Slovakia Serbia Russia Romanian Portuguese Polish Norwegian Lithuanian Latvian Latin America 5 Latin 2 Latin 1 Latin Korea Japan 81
ish
ish
n
ese n
n
ian
n n
Description
n
Code 1258 1254 1250 1252 857 874 936 950 850 850 852 852 855 866 852 850 852 850 775 775 850 949 9 850 850 852 32
P age
Scanner Programming Manual 1. Page Code
Step3: St Prompt. 1: Step Windows
e p 2:
Goto HKEY_CURRENT_USER Right Open the Registry Editor. You can do so by typing “regedit” in the “Search Windows” function or in Command in or function Windows” “Search the in “regedit” typing by so do YouEditor.canRegistry the Open
-
– Settingup theWindows Registry
- Unicode Hex Input Setup Input Hex Unicode clickon mouse or press shift+ F10 (on keyboard) to \ Co ntrol Panel
\ InputMethod 82
add a newString Value
( of type “ REG_SZ ” ) .
Scanner Programming Manual 2.
Step1: MAC Step Step4:
5 -
: AddingUnicode HexInput in menu bar
Goto the Apple Menu Reboot the computer Name thenew String value as .
- > System> Preferences
“ EnableHexNumpad
- > Keyboard> 83 ” and ” set its Value data to “
1 ”.
Scanner Programming Manual
Step2: Step3:
Onthe Keyboard tab, click Click the “ + ”
buttonto add an input source. on “ InputSources
”
andcheck the 84
“ Show Input menu in menubar ”
box.
Scanner Programming Manual
Step6: Step5: c done, Step 4:
lick
Scroll to and select “Others”. Click on Changethe input selection to Unicode Hexin Input menu bar. Closethe Keyb onthe “ Add ” oard Preferences menu.
button.
“ Unicode Hex Input
85
” (you can also use the Search function to find it)
. When Scanner Programming Manual . . . . . procedureislisted below for reference. Dollar a Sign, you have with to set the “Preamble” to “$”. The leadingconfiguration output data scanned the want you If Example: “ in value ASCII desired menu, programming of parameters definable user the configure To Shortcut Input ASCII . . HEX/ASCIITable
mode fornormal operation. Scan the system command Preamble setting. command system the Scan Scanthe option Scanthe option code of “ the to Refer Scan familycode 3 Scanthe system command - 24 enterto programming mode. $ ”is
24 .
Hex/ASCIITable ” for details. ” for code
–
Scanner PREAMBLE HEX – –
4 2
listedon the out fold back cover. listedon the out fold back cover.
f
r. o hv t rfr o the to refer to have You orm. – –
il s yu o cn your scan to you ask will – End , you will find the HEX valueHEX the findwill you , PROGRAM
I (Finish) FIN
to selectto this family.
to to exit the programming
listedpageon
o terminate to Scanner
via
86
HEX/ASCII Table Reference
L
Example : ASCII “A” D C B A E F 9 8 7 6 5 4 3 2 1 0
H
: Low Byte of HEX Value HEX of Byte : Low Value HEX of Byte : High ENQ SOH ACK EOT NUL ETX STX BEL SO CR HT BS VT FF LF SI 0
CAN ESC SUB SYN NAK DC4 DC3 DC2 DC1 ETB DLE EM GS US RS FS 1
SPACE % 2 & + $ # * " - ) ( / . , ! '
HEX “41”; ASCII “a” 3 > = < ? 9 8 7 6 5 4 3 2 1 0 ; :
@ M O G N H D C 4 K E B A F L J I
W Q U R 5 Y X V S P Z T _ ^ ] \ [
m 6 o n h g e d b a k c ` f l j i
“61” DEL
w 7 ~ u q p z y x v s } { r | t
Scanner Programming Manual Set Quick Interface Host
Keyboard Replacement Keyboard USB HID Legacy Mode Legacy USB HID RS232 S RS232
erial
Commands
USB HID
USB HID USB HID Standard Mode Turbo
87
Mode
PS/2 (DOS/V) KBW Standard Mode Standard KBW (DOS/V) PS/2 PS/2 (DOS/V) KBW KBW (DOS/V) PS/2 USB C om Port Emulation Port om
Turbo
Mode
Scanner Programming Manual Set Quick Mode Operation
Low Power (Low powe Power (Low Low Presentation Trigger triggering) (External (Auto sensing) (Auto
r trigger)
Commands
Alternative (Periodic power off) power (Periodic Alternative Level (Auto power off) (Auto power Level
Multiple Read Multiple
88
Force (Continued power on) power Force (Continued Diagnostic Toggle reading) (Repeat
(Test reading)
Scanner Programming Manual Option
Codes FIN (Finish) FIN 0 4 3 2 1
9 8 7 6 5
Abort
89
D C B A E
END (Exit) F
Scanner Programming Manual System Commands System . . .
would User Control Control Defa Master Default: Factory Default: like to return to previous setting, please scan scan please setting, previous to return like to (Enter Programming Mode) Programming (Enter , (Exit Programming Mode) (Exit Programming
(except Record Suffix; Preamble; Postamble), Postamble), Preamble; Suffix; Record (except the rest of parameters will be returned to default value. default to will returned be parameters of rest the ult:
After scanning After
FIN (Finish) FIN After scanning “Master Default” command, the scanner will remain the pre the remain will scanner the command, Default” “Master scanning After PROGRAM After scanning After END
”
Save User Save
”
Factory Default Factory
Default ”
command, all parameters will be returned to factory default value. default factory to will returned be parameters all command, ”
“
command, all command, User Default User Serial Interface Control Control Interface Serial
” . Save User Default User Save
current current User Default User parameters will be be will parameters
90
ecp Rcr Sfi; rabe Post Preamble; Suffix; Record (except
- stored to the flash memory. Once you change the parameter and parameter the change you Once memory. flash the to stored set parameters of parameters set Host Interface Selection Interface Host List Information System PowerTool Link Host Factory Master Default Master amble), (SYSLIST)
and Default Default
Wand/Laser Emulation Emulation Wand/Laser
, Keyboard Interface Keyboard