THE PROFESSIONAL’S CHOICE WWW.PROTOTAL.CA Ultra Alloy Super premium Table of Contents Self-centering : (16) Standard / self-centering and set. Super Premium 135 ° . . . . (3) Type 296 and Type 296-XL for metals with hexagonal shank: Numerical drills and alphabetical drills. (4) Bridge and car length... Hole Hog No-Taper Reamers : 3/8 '' Reduced Shank Drill Bits: Fractional and sets. 3 3/8 '' socket dishes ... Acrylic drills: Extra long drills 6, 9 and 12 " (5) Fractional and set. Fractional - 6 ’’, 9 ’’ and 12 ’long Brad Point : (17) Fractional and sets. Metric drills . . . . (6) ChatterProof Cutters & Deburring Tools: . . . (18) with pilot and without pilot / Deburring tools, 135 ° Drill Sets . . . . (7) 82 ° 6 flute HSS burrs without burrs and sets ... "THE MOST POPULAR SETS" Equivalent Decimal Chart & Drill Size Table (19) Short drills for mechanics: 3 dishes with plug and sets. Taps - Spiral point & Straight flute : . . . (20) 3/8 "Reduced shank Drill Bits : (8) Intermediate spiral and metric style / Taper, Plug style & 3/8 "shank short drills and sets. Bottoming / Sets (Plug et Taper).

Very short drills (ideal for screwing) : (9) Taps - Sets (Straight flute) / Semi-bottoming taps Fractional, Alphabetical, Numeric and sets. (Fractional and metric) . . . (21) Mechanical Hex Shank Quick Release Drills : /4 '' Hex Shank Drill Bits and Extensions ... Taps - Metric: Taper, Plug & Bottoming Quick Release Drill Sets . . . . (10) Metric sets : . . . . (22) Taper, Plug & Bottoming Reduced shank drills : (11) Fractional & Metric. 3/4 "black and gold rod: Fractional ... Reduced Neck Tap, NPT Pipe Taps High speed hexagonal dies . . . . (23) Left hand drill: Left hand drills and Sets. Drill and Tap Sets : . . . . (24) Sets & Extractors : (12) Tap Sets ... Studout Style and Sets. HSS taps & die sets : (25) Very short left-hand drills ... - 3 flats from drill 3/16: Sets of 25 pcs / 23 pcs / 15 pcs & 14 pcs Sets... Screw & Pipe Pullers - High Carbon Steel Spiral Style: (13) HSS taps & die sets 58 and 40 pcs (26) Screws & pipe extractors and sets. 58 pcs set and 40 pcs sets

Drill and Tap Combination / 1/4 '' Quick Release Multi-diameter drills: Drills and Taps . . . . Hexagonal shank, multi-diameter drills and sets ... (27) Tapping and wax: Bee-Tap # T-011 Hi-Carbon steel taps . . . . (28) Plug & Taper (Machine screws) / Set ... Double end drills: (14) Fractional and numeric Hi-Carbon steel taps . . . . (29) Bottoming (Machine Screw and Fractional) and Sets ... Car Reamers - Standard Flute / Fast Spiral: (Standard Flute / Fast Spiral) and Sets ... Hi-Carbon steel dies (Hexagonal). (30) Bridge Reamers - (Straight Flute and Spiral): . . . (15) Machine screws & Fractional & metric sizes.

Hi-Carbon Steel Dies (Adjustable & Round). (31) Machine Screw & Fractional ... Table of contents

Hi-Carbon Taps - Metric Plug & Taps (NPT). (32) SE ‘Oval / egg shape ’: Taps (NPT) Fractional, Plug (Intermediate) Metric & Set . Oval / egg shape , Aluma & 6 ’extended shank length. SF ‘Tree shape radius ’: . . . . (46) Tree shape radius / Aluma & 6 ’length. Hi-Carbon 24 and 37 pcs Sets. (33) Sets of 24 pcs & 37 pcs SG ‘Pointed tree shape ’: Pointed tree shape / Double cut. Hi-Carbon 14 and 16 pcs Tap and die sets. (34) SH ‘Flame shape ’: 14 pcs & 16 pcs sets Flame shape / Double cut & 6 "in length. SJ ‘60 ° cone shape ’: Hi-Carbon & Fractional steel tap and die sets. (35) 60° cone shape / Double cut. 40 pcs sets SK ‘90 ° cone shape ’: (47) 90° cone shape / Double cut. Die holder and net gauges: . . . . (36) ‘Economical’ die holder, Professional quality ’die holder & Net gauge SL ‘Taper shape radius 14 °included angle : Taper shape radius 14° included angle / Aluma & Extra length. Tap and reamer holder : . . . . (37) SM ‘Pointed cone shape ’: Professional Quality ’Tap and Reamer Holder,‘ Economical ”Tap and Reamer Holder, Pointed cone shape Ratchet T-Handle / Tap Holder, T-Handle Tap Holder SN ‘Inverted cone shape’: Inverted cone shape Automotive weldout drill point - Super cobalt . . . (38) Premium Double Cut Carbide Cutter Sets: Weldout drill bit for point. Super cobalt (HSS), ultra robust Cutter sets (9 pcs & 8 pcs ...) & sets ... Premium Aluminum Carbide Burr Set (8 pcs) Premium carbide burrs display Carbide tipped Hole cutters: Double and Aluma cut . . . . (48) Cuts to 3/16 ’’ Display of burrs (24pcs & 48 pcs ...) Carbide Hole Cutters & Extension: . . . . (39) (Cut to 1 ’’) Spira-Broach annular HSS: 1 ’& 2’ depth of cut / Sets. Hole cutters: Spira-Broach / Annular Drill Set: Set. 1 '' & 2 '' in length (Annular Drill Bit Set ...) Carbide Hole Cutter Sets : (40) Annular drill bit display : (49) (3/16 ’’ cut to 1 ’’) Annular drill bit...

Hole cutters, Annular Spira-Broach - M35 6% Cobalt: . . . . (50) 1 "& 2" Depth of Cut / Sets ... Carbide drill bit, straight flute . . . (41)

Carbide drill bits for automotive welding: . . . . (42) Annular Spira-Broach - M42 the strength of Cobalt, Weldout drill bit for welding point (M42 cobalt HSS heavy duty point ) 8% Cobalt . . . . (51) 1 "& 2" Depth of Cut / Sets ... Premium carbide point : . . . . (43) (Recommended RPM) Magnetic-based drills . . . . (52) SA ‘Cylinder shape’ - No cutting on the end : Spira-Broach (MBD 4500 et MBD 40)... Cylinder shape - No cutting on the end - Double cut, Aluma cuts & 6 "extended shank length. SB ‘ Cylinder shape’ - With cutting on the end : (44) Magnetic-based drills . . . . (53) Cylinder shape - With cutting on the end - Double cut. Spira-Broach (MBD 6500 et MBD 7000)...

SC ‘Cylinder shape with rounded end ’: Cylinder shape with rounded end - Double cut, Aluma cut & 6 "extended shank length . Feeding and drilling speed / SD ‘Ball shape : . . . . (45) Recommended feeding of drills of different diameters ... (54) Ball shape / aluma & 6 "extended shank length. Drill bit Ultra alloy Super Premium 135°

‘The best drills bits in the world’ Drill bit technology right behind the laser. Excellent for: , hardened steel up to 58 rockwell, aluminum and more. Superior quality in the industrial sector.

Drill bit for metals These 135 ° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the . The drills bits are ideal for use with hand drills with keyless chucks. The rugged construction and alloy steel with high molybdenum content makes them ideal for hard metals, stainless steels and other materials that are difficult to drill.

135 ° split point

Drill bit for metals Drill bit for metals Part Diameter Part Diameter 09201 1/16 09351 19/64 09211 5/64 09361 5/16 09221 3/32 09371 21/64 09231 7/64 09381 11/32 09241 1/8 09391 23/64 09251 9/64 09401 3/8 09261 5/32 09411 25/64 09271 11/64 09421 13/32 09282 3/16 09431 27/64 09292 13/64 09441 7/16 Quality Black 09302 7/32 09451 29/64 and Gold 09312 15/64 09461 15/32 appearance 09321 1/4 09471 31/64 09331 17/64 09481 1/2 09341 9/32

19/64 to 1/2 '6' 1/16 to 9/32 '12' per package per package

3- Flats for a good grip

#46932

PROTOTAL VS. COBALT A PROTOTAL drill bit with its thin band will penetrate hardened steel quickly enough to continuously cut under the area which hardens due to deformation. This means that the drill bit cuts the steel less hard. The cobalt drill bit, with its thick band, can not be fed at a speed fast enough to cut under the hardening zone. As a result, the cobalt drill bit continually forces into hardened steel.

3 Why choose the ultra alloy? - Longer life expectancy The nitro-carburized flute has an increased rockwell hardness. - Cut harder materials The flat point takes a smaller area. More cutting is directed to a smaller area. This makes it possible to drill materials with a hardness greater than 45 on the rockwell 'C' scale. - Self-centering The design of the split point gives a precise start without the use of a central punch. - Appearance of exceptional quality The rich amber gold color distinguishes it from the cutting tools of raw materials. - Operates cold, uses less torque The 135 ° point takes a smaller area resulting in less heat. Friction is reduced by the surface treatment of amber gold (titanium and cobalt). ‘’Performance’’ The PROTOTAL drill bit will significantly outperform the cobalt drill bit in hard working applications in stainless steel. This performance advantage is the result of different fabrications between the two types of drills bits . The drills bits are made of Hi-moly special steel, which is much stronger than cobalt steel. The band on a PROTOTAL drill bit can be considerably thinned because of the toughness of the steel. A PROTOTAL drill bit with its thin band penetrates the hard stainless steel quite quickly and cuts the chips continuously without deformation. This means that the drill bit cuts steel with less effort. The cobalt drill bit, with its thick band, can not be fed so quickly to cut under the area that lasts. As a result, the cobalt drill bit continually forces into hardened steel. ‘’Steel stainless - Stronger work’’ VS ‘’Good work speed’’ A quick way to differentiate if stainless steel comes from work plus VS good work speed is to observe the formation of chips. Chips that come from stronger work break up in pieces during the drilling process while chips that come from work at the right speed are long and filamentous. ‘’Cobalt applications’’ Cobalt drills bits are recommended for the free of stainless titanium alloys and other high strength materials. These applications require the very high hardness of cobalt steel to counter the significant heat generated in the drilling process.

Wire drill bit Letter drill bit Wire Wire Part sizes Part sizes Letter 38940 1 92290 33 Part sizes 38950 2 92280 34 39460 A 38960 3 92270 35 39470 B 38970 4 92260 36 39480 C 38980 5 92250 37 39490 D 38990 6 92240 38 39500 E 39000 7 92230 39 39510 F 39010 8 92220 40 39520 G 39020 9 88420 41 39530 H 39030 10 88410 42 39540 I 39040 11 88400 43 39550 J 39050 12 88390 44 39560 K 39060 13 88380 45 39570 L 39070 14 88370 46 39580 M 39080 15 88360 47 39590 N 39090 16 88350 48 39600 O 39100 17 88340 49 39610 P 39110 18 88330 50 39620 Q 39120 19 88320 51 39630 R 39130 20 88310 52 39640 S 39140 21 88300 53 39650 T 39150 22 88290 54 39660 U 39160 23 88280 55 39670 V 39170 24 88270 56 39680 W 39180 25 88260 57 39690 X 39190 26 88250 58 39700 Y 39200 27 88240 59 39710 Z 39210 28 88230 60 Letter drill bit: A at L = 12 / package 39220 29 Wire drill bit = 12 / package M at Z = 6 / package 39230 30 Set of 20 pcs: (88640) #1 at 60 Set of 26 pcs: (88660): A at Z 92310 31 (43460) #61 at 80 92300 32 4 Type 278-UB 3/8’’ drills bits with reduced shank Type 240-B 118 ° split point 135 ° split point for fast penetration and accurate start without Widely used in general applications. center punch.

Type 278-UB Recommended for stainless steel and tempered metal work and Very small diameter other hard metal drilling applications. Part Diameter 3-Flats with 3/8’’ shank 02750 1/64 02760 1/32 Part Diameter 02770 3/64 59201 25/64 59211 13/32 59221 27/64 59231 7/16 59241 29/64 59251 15/32 59261 31/64 59271 1/2 ‘Available until 5/8’

Extra length drills bits 6’’- 9’’- 12’’ Steel tools, Hi-molybdenum special. Treated gold surface for maximum lubricity. Rugged construction, 135 ° split point, no center punch required. The gyroid torsion flute and the efficiency of its manufacture provide outstanding performance in deep hole drilling applications. Recommended for hard stainless steel work and other hard metal drilling applications. These drills bits allow drilling up to 12 inches deep or more, without removing the wick to clear chips. Advance twice as fast as standard drills bits.

Type XGT-UB

Strong split point at 135 ° - 6’’ - 9’’ 12’’

Fractionnal - Type XGT-UB - 6’’ , 9’’ and 12 '' length

Size x Size x Size x Part Length Part Length Part Length 39240 1/8 x 6 40780 1/8 x 9 43050 1/8 x 12 39250 #29 x 6 40890 9/64 x 9 53130 9/64 x 12 39260 9/64 x 6 40790 5/32 x 9 43060 5/32 x 12 39270 5/32 x 6 53140 11/64 x 9 53150 11/64 x 12 39280 11/64 x 6 40800 3/16 x 9 43070 3/16 x 12 39300 3/16 x 6 53160 13/64 x 9 53170 13/64 x 12 39310 #10 x 6 40810 7/32 x 9 43080 7/32 x 12 39320 13/64 x 6 53180 15/64 x 9 53190 15/64 x 12 39330 7/32 x 6 40820 1/4 x 9 43090 1/4 x 12 39340 #1 x 6 40830 9/32 x 9 43100 9/32 x 12 39350 15/64 x 6 40840 5/16 x 9 43110 5/16 x 12 39360 1/4 x 6 40850 11/32 x 9 43120 11/32 x 12 39370 ‘F’ x 6 40860 3/8 x 9 43130 3/8 x 12 39380 9/32 x 6 40870 7/16 x 9 43140 7/16 x 12 39390 5/16 x 6 40880 1/2 x 9 43150 1/2 x 12 39400 11/32 x 6 39410 3/8 x 6 39420 13/32 x 6 39430 7/16 x 6 39440 1/2 x 6

5 Metric drills bits

Type 643-UB Ultra Bor Super Premium - NAS 907B 135° Split point The 135 ° split point allows for fast penetration and precise starting without a central punch. The drill bit withstands significantly higher drilling temperatures while maintaining efficiency.

Metric

Part Diameter Qty. / pkg Part Diameter Qty. / pkg Part Diameter Qty. / pkg 48760 0.70 10 49280 4.10 10 49760 8.90 5 48780 0.80 10 49290 4.20 10 49770 9.00 5 48790 0.85 10 49300 4.30 10 49780 9.10 5 48800 0.90 10 49310 4.40 10 49790 9.20 5 49990 0.95 10 49320 4.50 10 49800 9.30 5 48690 0.98 10 49330 4.60 10 49810 9.40 5 48820 1.00 10 49340 4.70 10 49820 9.50 5 48750 1.05 10 49350 4.80 10 49830 9.60 5 48840 1.10 10 49360 4.90 10 49840 9.70 5 48850 1.15 10 49370 5.00 10 49850 9.80 5 23270 1.18 10 49380 5.10 10 49860 9.90 5 48860 1.20 10 49390 5.20 10 49870 10.00 5 48870 1.25 10 49400 5.30 10 12450 10.10 5 48880 1.30 10 49410 5.40 10 49880 10.20 5 48890 1.35 10 49420 5.50 10 12510 10.30 5 48900 1.40 10 49430 5.60 10 50220 10.40 5 48910 1.45 10 49440 5.70 10 49890 10.50 5 48920 1.50 10 49450 5.80 10 12460 10.60 5 48930 1.55 10 49460 5.90 10 50230 10.70 5 48940 1.60 10 49470 6.00 10 49900 10.80 5 48950 1.65 10 49480 6.10 10 12470 10.90 5 48960 1.70 10 49490 6.20 10 49910 11.00 5 48970 1.75 10 49500 6.30 10 12480 11.10 5 48980 1.80 10 49510 6.40 10 49920 11.20 5 49000 1.90 10 49520 6.50 10 50240 11.30 5 49010 1.95 10 49530 6.60 10 12490 11.40 5 49020 2.00 10 49540 6.70 10 49930 11.50 5 49030 2.05 10 49550 6.80 10 12500 11.60 5 49040 2.10 10 49560 6.90 10 50250 11.70 5 49060 2.20 10 49570 7.00 10 49940 11.80 5 49080 2.30 10 49580 7.10 10 12520 11.90 5 49100 2.40 10 49590 7.20 10 49950 12.00 5 49120 2.50 10 49600 7.30 10 12530 12.10 5 49130 2.60 10 49610 7.40 10 49960 12.20 5 49140 2.70 10 49620 7.50 5 50260 12.30 5 49150 2.80 10 49630 7.60 5 12540 12.40 5 49160 2.90 10 49640 7.70 5 49970 12.50 5 49170 3.00 10 49650 7.80 5 12550 12.60 5 49180 3.10 10 49660 7.90 5 12570 12.70 5 49190 3.20 10 49670 8.00 5 50270 12.80 5 49200 3.30 10 49680 8.10 5 12560 12.90 5 49210 3.40 10 49690 8.20 5 49980 13.00 5 49220 3.50 10 49700 8.30 5 49230 3.60 10 49710 8.40 5 49240 3.70 10 49720 8.50 5 49250 3.80 10 49730 8.60 5 49260 3.90 10 49740 8.70 5 49270 4.00 10 49750 8.80 5

6 Super Premium drills bits sets 135 ° ‘ THE MOST POPULAR SETS’

#46902 #46912 #46922 Set of 13 drills bits Set of 15 drills bits Set of 21 drills bits 1/16 x 1/4 x 64 1/16 x 1/2 x 32 1/16 x 3/8 x 64

#46932 #58660 #92400 Set of 29 drills bits Set of 25 metric drills bits Set of 8 drills bits with 1/16 x 1/2 x 64 Diam: 1mm x 13mm x 0.5mm reduced shank 1/2 Diam: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1’’

#12250 #92401 #93840 Set of 4 drill bits Set of 33 drills bits Set of 115 drills bits shank 1/2 ''Diam: 1/2 à 1’’ x 64 1/16 x 1/2 x 32 + 9/16, 5/8, 3/4 & 1’’ Wire #1-60 + Letter A-Z

7 Short drills bits for mechanic

Type 250-UB

3-Flats - 135° Split point

Special Hi-molybdenum steel tool. 135 ° split point for fast drilling and punch-free start. All and clearance are treated on the gold surface for maximum lubricity. Heat treated at 2185 ° F and then finished nitro-carburization at 950 ° F to be substantially harder than hardened steel. The 3-flats on the shank give a good grip (3/16 '' and bigger.)

3-Flats on shank Sets - Type 250-UB

Diameter Diameter Descriptions Part (Inches) Part (Inches) Part and sizes 22860 1/16 87090 21/64 66460 Set of 13 pcs 22870 5/64 87100 11/32 1/16 - 1/4’’ x 64 22880 3/32 87110 23/64 86950 7/64 87120 3/8 66470 Set of 15 pcs 86960 1/8 87130 25/64 1/16 - 1/2’’ x 32 86970 9/64 87140 13/32 57810 Set of 21 pcs 86980 5/32 87150 27/64 1/16 - 3/8’’ x 64 86990 11/64 87160 7/16 87000 3/16 87170 29/64 66480 Set of 29 pcs 87010 13/64 87180 15/32 1/16 - 1/2’’ x 64 87020 7/32 87190 31/64 87030 15/64 87200 1/2 87040 1/4 87050 17/64 87060 9/32 87070 19/64 87080 5/16

3/8’’ Reduced shank drills bits

Type 258-UB

3-Flats - 135° Split point A reduced shank with 3-Flats gives a good grip.

Sets - Type 258-UB Shank 3/8’’ short drills bits shank 3/8’’ Diameter Descriptions Part (Inches) Part and sizes 81560 13/32 Set of 15 pcs 81570 27/64 57910 1/16 - 1/2’’ x 32 81580 7/16 81590 29/64 92340 Set of 21 pcs 81600 15/32 1/16 - 1/4’’ x 64 + 81610 31/64 9/32 - 1/2’’ x 32 81620 1/2 57920 Set of 29 pcs 1/16 - 1/2’’ x 64

8 Very short drills bits (ideal for the screwing)

Type 260-UB

Drill bit Super Premium - 135° Split point (Round chuck)

Special Hi-Molybdenum steel tools. Gold treated surface and clearance for maximum lubricity. Rugged construction, 135 ° split point, no center punch required.

Fractionnal

Diameter Diameter Diameter Letter Part (Inches) Part (Inches) Part (Inches) 87710 1/16 87860 19/64 88010 17/32 Diameter Diameter 87720 5/64 87870 5/16 88020 35/64 Part (Inches) Part (Inches) 87730 3/32 87880 21/64 88030 9/16 23601 A 23731 N 87740 7/64 87890 11/32 88040 37/64 23611 B 23741 O 87750 1/8 87900 23/64 88050 19/32 23621 C 23751 P 87760 9/64 87910 3/8 88060 39/64 23631 D 23761 Q 87770 5/32 87920 25/64 88070 5/8 23641 E 23771 R 87780 11/64 87930 13/32 88080 41/64 23651 F 23781 S 87790 3/16 87940 27/64 88090 21/32 23661 G 23791 T 87800 13/64 87950 7/16 89210 43/64 23671 H 23801 U 87810 7/32 87960 29/64 89220 11/16 23681 I 23811 V 87820 15/64 87970 15/32 89230 45/64 23691 J 23821 W 87830 1/4 87980 31/64 89240 23/32 23701 K 23831 X 87840 17/64 87990 1/2 89250 47/64 23711 L 23841 Y 87850 9/32 88000 33/64 89260 3/4 23721 M 23851 Z

Wire

Diameter Diameter Diameter Part (Inches) Part (Inches) Part (Inches) 87600 1 87400 21 23360 41 87590 2 87390 22 23370 42 87580 3 87380 23 23380 43 87570 4 87370 24 23390 44 Sets - Type 260-UB 87560 5 87360 25 23400 45 87550 6 87350 26 23410 46 Descriptions 87540 7 87340 27 23420 47 87530 8 87330 28 23430 48 Part and sizes 87520 9 87320 29 23440 49 66850 Set of 26 pcs 87510 10 87310 30 23450 50 A-Z 87500 11 87300 31 23460 51 Set of 29 pcs 87490 12 87290 32 23470 52 66490 1/16 - 1/2’’ x 64 87480 13 87280 33 23480 53 87470 14 87270 34 23490 54 23560 Set of 60 pcs 87460 15 87260 35 23500 55 #1-60 87450 16 87250 36 25510 56 87440 17 87240 37 23520 57 87430 18 87230 38 23530 58 87420 19 87220 39 23540 59 87410 20 87210 40 23550 60

9 Mechanic drills bits with hexagonal shank and quick release

Ideal for the tools percussion wireless! Type QR-UB Shank hexagonal 1/4’’ Quick Release Drill bit 135° Split point Super Premium

Drill bit with mechanical length with quick release chuck. Special Hi-molybdenum steel tool. Specially designed for hand drills and accessories. Quick release makes it easy to change cutting tools.

Adaptor for quick release drill bit.

Type QR-UB Extensions Quick release drill bit (Shank hexagonal 1/4’’) One-handed operation - Simply push your PTA into the extension to load and lock the accessory automatically. All patented hexagonal connection systems may contain any 1/4 '' hex shape, including. Grooved and notched product. The patented hexagonal connection system keeps QR-UB Shank hexagonal 1/4’’ the accessory free of vibration and tightness. A tight fit for a professional feel.

Diameter Total Length Part (Inches) length of the flute Qty / Pkg Type QR-UB Extensions 34501 1/16 2-5/8 7/8 6 34521 3/32 3-1/4 1-1/4 6 34541 1/8 3-1/2 1-7/16 6 Part Sizes 34561 5/32 3-1/2 1-11/16 6 34821 3 '' quick release extension 34581 3/16 3-3/4 1-7/8 6 34831 6’’ quick release extension 34611 7/32 4’’ 2’’ 6 34841 12’’ quick release extension 34631 1/4 4-1/4 2’’ 6 34651 9/32 3-3/16 2-1/4 3 34671 5/16 4’’ 2-1/2 3 34691 11/32 4-7/32 2-5/8 3 34711 3/8 4-1/4 2-11/16 3 34731 13/32 4-1/2 2-13/16 3 34751 7/16 4-1/2 2-15/16 3 34771 15/32 4-7/8 3-1/8 3 34791 1/2 5’’ 3-3/8 3 34801 : Adaptor for quick release drill bit

Sets (Quick release drill bit)

Set QR-7A* - Soft pouch Qty of Set QR-12 - Rugged case Part Descriptions and sizes each 34803 1/16, 3/32, 1/8, 5/32, 1 QR-12 Qty of 3/16, 7/32, 1/4 Part Descriptions and sizes each 34811 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1 1/4, 5/16, 3/8, 7/16, 1/2 & Adaptor for quick release drill bit Set QR-7B* - Rugged case QR-7B Qty of Part Descriptions and sizes each Set QR-16 - Soft pouch 34804 1/8, 3/16, 1/4, 5/16, 1 Qty of 3/8, 7/16, 1/2 Part Descriptions and sizes each QR-16 * QR-7A and QR-7B packages do not include 34812 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1 quick release adapters 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 & Adaptor for quick release drill bit 10 Reduced shank drills bits Type 280-UB Rod black and gold 1/4’’ with 3-Flats, very robust, 135° split point

Special Hi-Molybdenum steel tools. Solid one-piece construction. Sizes greater than 1 "in diameter have a split point of 118 ° and are 6" in overall length.

Fractionnal - Type 280-UB Metric - Type 280-UBM

Diameter Diameter Part Diameter 25500 14.0 Part (Inches) Part (Inches) 25501 14.5 29550 33/64 29770 55/64 25502 15.0 29560 17/32 29780 7/8 25541 15.5 29570 35/64 29790 57/64 25504 16.0 29580 9/16 29800 29/32 25542 16.5 29590 37/64 29810 59/64 25510 17.0 29600 19/32 29820 15/16 25511 17.5 29610 39/64 29830 61/64 25512 18.0 29620 5/8 29840 31/32 25543 18.5 29630 41/64 29850 63/64 25514 19.0 29640 21/32 29860 1’’ 25544 19.5 29650 43/64 29870 1-1/32 25520 20.0 29660 11/16 29880 1-1/16 25521 20.5 29670 45/64 29890 1-3/32 25522 21.0 29680 23/32 29900 1-1/8 25523 21.5 29690 47/64 29910 1-5/32 25524 22.0 29700 3/4 29920 1-3/16 25529 22.5 29710 49/64 29930 1-7/32 25530 23.0 29720 25/32 29940 1-1/4 25531 23.5 29730 51/64 29950 1-5/16 25532 24.0 29740 13/16 29960 1-3/8 25549 24.5 29750 53/64 29970 1-7/16 25534 25.0 29760 27/32 29980 1-1/2

Rod black and gold 3/4’’ - 135° split point They are high performance, close tolerance tools and tight performance specification tools for drilling with Bridgeport style or other production machines with 3/4 "chucks. Special Hi-Molybdenum steel tools. The body and spacing have a golden surface for maximum lubrication. Processed at 2185 ° C heat and then processed at 950 ° F nitro-carburization to be more durable than the HSS Standard.

#62730 Fractionnal - Type 281-UB Extension 6’’ shank 1/2 Part Diameter 29741 13/16 29781 7/8 29821 15/16 29861 1’’ 29901 1-1/8 29941 1-1/4 29961 1-3/8 29981 1-1/2 11 Left-Hand Spiral drills bits

Type 240-AL

Left-Hand spiral drills bits Special Hi-Molybdenum steel tools. Ideal for drilling broken bolts. Can replace the extractor (Left-Hand spiral drills bits). The drills bits left, can loosen the bolt while drilling a hole for the use of an extractor.

Left-Hand spiral drills bits Sets of Left-Hand spiral drills bits Diameter Diameter Part Description of the size Part (Inches) Part (Inches) 87650 Set of 8 pcs 92471 21/64 92430 1/16 1/16 - 1/2 x 16 23150 5/64 92472 11/32 89290 3/32 92473 23/64 87651 Set of 12 pcs 23160 7/64 92480 3/8’’ 1/16 - 5/16 x 32, 3/8, 92440 1/8 92481 25/64 7/16 &1/2 92441 9/64 92482 13/32 23170 5/32 92483 27/64 87652 Set of 13 pcs 92442 11/64 92490 7/16 1/16 - 1/4 x 64 92491 29/64 92450 3/16 Set of 15 pcs 92492 15/32 87654 92443 13/64 1/16 - 1/4 x 32 92444 7/32 92493 31/64 92451 15/64 92500 1/2’’ 87853 Set of 17 pcs 92460 1/4’’ 1/16 - 1/4 x 64, 92452 17/64 5/16-1/2 x 16 92453 9/32 23180 19/64 87854 Set of 29 pcs 92470 5/16 1/16 - 1/2 x 64

Extractors & Sets The square shape of these extractors gives the tools the ability to remove broken bolts, screws and hoses with minimal deformation of the broken part. To remove the broken threaded part:

Drill a hole at the end of the broken piece (of the drills bits on the left are recommended for this drilling operation), insert the extractors and turn counterclockwise with a wrench on the exposed end of the extractor. The broken part must unscrew without damaging the threads. These extractors do not damage or discard the object being released.

StudoutTM style square

Screw Sets of bolt extractors Extractors Size of Part Number drilling Part Description of the size 70760 E-1 1/8 70840 Set of 4 pcs 70770 E-2 3/16 E 2, 3, 4 & 5 70780 E-3 1/4 70850 Set of 8 pcs 70800 E-4 5/16 E 1, 2, 3 & 4 + 1/8, 70810 E-5 3/8 3/16, 1/4 & 5/16 70820 E-6 1/2 70830 E-7 9/16 70860 E-8 5/8 70870 E-9 11/16

12 Left-Hand drills bits very short, 135° split point - 3-Flats from the drills bits 3/16

Ideal for removing broken studs in tight places. Left-hand spiral drills bits often remove bolts without the need for an extractor.

Diameter Length Length of Part in inches Total the flute Qty / Pkg 35214 3/32’’ 1-3/4’’ 3/4‘’ 6 35234 1/8’’ 1-7/8‘’ 7/8‘’ 6 Square extractors 35254 5/32’’ 2-1/16‘’ 1‘’ 6 35274 3/16’’ 2-3/16‘’ 1-1/8‘’ 6 35294 7/32’’ 2-3/8‘’ 1-1/4‘’ 6 Screw 35314 1/4’’ 2-1/2‘’ 1-3/8‘’ 6 Extractors Size 35334 9/32’’ 2-11/16‘’ 1-1/2‘’ 3 35354 5/16’’ 2-13/16‘’ 1-5/8‘’ 3 Part Number drilling 35374 11/32’’ 3‘’ 1-11/16‘’ 3 20890 E1 1/8 35394 3/8’’ 3-1/8‘’ 1-13/16‘’ 3 20900 E2 3/16 20910 E3 1/4 35414 13/32’’ 3-5/16‘’ 1-15/16‘’ 3 20920 E4 5/16 35434 7/16’’ 3-7/16‘’ 2-1/16‘’ 3 20930 E5 3/8 35454 15/32’’ 3-7/8‘’ 2-1/8‘’ 3 20940 E6 1/2 35474 1/2’’ 3-3/4’’ 2-1/4’’ 3 20950 E7 9/16 20960 E8 5/8 20970 E9 11/16

Set

Part Description of the size 35484 Extractor square EX 1, 2, 3, 4 & 5 + 3/32’’, 1/8’’ 3/16’’, 1/4’’, 5/16’’

Screw and pipe extractors - High carbon steel, Spiral style Remove screws, bolts, threaded parts and broken pipes. To remove the broken thread, drill a hole in the broken part, insert the puller and turn to the left. The broken part is extracted without damaging the nets.

BR-10

Type 420 - Screw & Pipe Extractors Sets screw and pipe extractors Screw Screw Extractors Size of Extractors Size of Part Description of the size Part Number drilling Part Number drilling 47170 Set of 4 pcs EX-1, 2, 3, 4 & 5 57100 EX-1 5/64’’ 57150 EX-6 13/32’’ 57110 EX-2 7/64’’ 57160 EX-7 17/32’’ 47180 Set of 5 pcs 57120 EX-3 5/32’’ 57170 EX-8 13/16’’ EX-1, 2, 3, 4 & 5 57130 EX-4 1/4’’ 57180 EX-9 1-1/8’’ 88550 Set of 8 pcs 57140 EX-5 17/64’’ EX-1, 2, 3, 4 + 3/32’’, 1/8’’, 3/16’’ & 1/4’’

58510 Set of 10 pcs EX-1, 2, 3, 4, 5 + 3/32’’,1/8’’, 3/16’’, 1/4’’& 5/16’’

91624 Set of 16 pcs EX-1 to EX-8 + E1 to E8

13 Step-drills Type 78-UB & Type 78-QR

Ultra Bit Multi-Diameter with shank 3-flats

Special design of the axial and radial flute to accelerate the drilling of the . The 135 ° of the auto-centerer starts easily with no required punch. Double flute drill bits quickly and easily clean precise holes in thin materials.

Use for all thin metals, rigid plastics, wood or composite materials with a thickness equal to or less than the thickness of the step. When drilling steel 1/8 "thick or larger, a smaller diameter starting hole will speed up the drilling process.

Type 78-UB Step-drills No of Size Part Size range (shank) 00700 1 1/8 - 1/2’’ 1/4’’ Type 78-QR Quick release - Shank 00701 4 3/16 - 1/2’’ 1/4’’ hex No of Size 00702 8 3/16 - 7/8’’ 3/8’’ 00703 3 1/4 - 3/4’’ 3/8’’ Part Size No of range Size (shank) Part Size range (shank) 00704 2 1/4 - 1’’ 3/8’’ 01401 1 1/8 - 1/2’’ 1/4’’ 00693 10 1/2’’ 1/4’’ 00710 13/16 13/16 - 1-3/8’’ 1/2’’ 01402 4 3/16-1/2‘’ 1/4’’ 00694 12 3/8’’ 1/4’’ 00711 12 7/8 - 1-3/8’’ 3/8’’ 01403 8 3/16-7/8’’ 1/4’’ * Note: Part# 00711: 3/16 steps at 7/8, 1-1 / 8 01404 3 1/4-3/4’’ 1/4’’ & 3/8 for conduit knock-outs

Sets - Type 78-UB Sets - Type 78-QR (Quick (Step-drills) release -Hex shank) Part Sizes 00721 1/8 - 1/2’’, 3/16 - 1/2’’ & 3/16 - 7/8’’ Part Sizes 00731 1/8 - 1/2’’, 3/16 - 1/2’’ & 1/4 - 1’’ 01441 1/8 - 1/2’’, 3/16 - 1/2’’ & 3/16 - 7/8’’ 00741 1/8 - 1/2’’, 3/16 - 1/2’’ & 1/4 - 3/4’’ 01451 1/8 - 1/2’’, 3/16 - 1/2’’ & 1/4 - 3/4’’ 00781 1/8 - 1/2’’, 1/4 - 3/4’’, 1/4 - 7/8’’ & 01461 1/8 - 1/2’’, 3/16 - 7/8’’ & 7/8 - 1-1/8’’ 7/8 - 1-1/8’’

Twin end drills Type 490-G Tapping and drilling wax 135° Split point Special Hi-Molybdenum steel tools. 135° split point, for fast drilling and accurate starting without a central punch. Heavy-duty PROTOTAL Bee-Tap # T-011 construction for superior performance and less breakage. High efficiency drilling and tapping wax Fractionnal Type Ideal for use with steel, aluminum and stainless steel. Biodegradable Wire Type 490-G Natural product ‘’Green’’ Environnemental OECD 301D 490-G certified biodegradable. Diameter Diameter Part (Inches) Part (Inches) 95090 3/32’’ 95020 10 95080 7/64’’ 95010 11 95980 1/8’’ 95000 20 95070 9/64’’ 94990 30 95060 5/32’’ 95050 3/16’’ 95040 7/32’’ 95030 1/4’’ 14 Car reamers - Standard flute Car reamers - Fast spiral

Car reamers , Standard flute, 3-flats on shank Car reamers, Fast spiral , 3-flats on shank

Type 50-UB (Standard flute) Type 51-UB (Fast spiral)

Diameter Diameter ‘Starting Diameter Diameter ‘Starting Diameter Diameter ‘Starting Part (Shank) (Inches) hole size’ Part (Shank) (Inches) hole size’ Part (Shank) (Inches) hole size’ 06390 3/8’’ 3/8’’ 5/16’’ 06381 5/16’’ 5/16’’ 17/64’’ 06461 1/2’’ 7/8’’ 19/32’’ 06400 1/2’’ 1/2’’ 3/8’’ 06391 3/8’’ 3/8’’ 5/16’’ 06471 1/2’’ 15/16’’ 5/8’’ 06410 1/2’’ 9/16’’ 7/16’’ 06501 7/16’’ 7/16’’ 3/8’’ 06481 1/2’’ 1’’ 7/8’’ 06420 1/2’’ 5/8’’ 7/16’’ 06401 1/2’’ 1/2’’ 3/8’’ 06491 1/2’’ 1-1/16’’ 29/32’’ 06430 1/2’’ 11/16’’ 15/32’’ 06411 1/2’’ 9/16’’ 7/16’’ 06541 1/2’’ 1-1/8’’ 61/64’’ 06440 1/2’’ 3/4’’ 1/2’’ 06421 1/2’’ 5/8’’ 7/16’’ 06551 1/2’’ 1-3/16’’ 1’’ 06450 1/2’’ 13/16’’ 35/64’’ 06432 1/2’’ 0.652 15/32’ 06482 1/2’’ 1-1/4’’ 1’’ 06460 1/2’’ 7/8’’ 19/32’’ 06431 1/2’’ 11/16’’ 15/32’’ 06561 3/4’’ 1-5/16’’ 1-3/32’’ 06470 1/2’’ 15/16’’ 5/8’’ 06441 1/2’’ 3/4’’ 1/2’’ 06571 3/4’’ 1-3/8’’ 1-7/64’’ 06480 1/2’’ 1’’ 7/8’’ 06531 1/2’’ 0.776 1/2’’ 06581 3/4’’ 1-7/16’’ 1-9/64’’ 06504 1/2’’ 1-1/16’’ 29/32’’ 06451 1/2’’ 13/16’’ 35/64’’ 06591 3/4’’ 1-1/2’’ 1-3/16’’ 06514 1/2’’ 1-1/8’’ 61/64’’ 06524 1/2’’ 1-3/16’’ 1’’ 06484 1/2’’ 1-1/4’’ 1’’ 06534 3/4’’ 1-5/16’’ 1-3/32’’ Sets - Type 51-UB 06544 3/4’’ 1-3/8’’ 1-7/64’’ 06554 3/4’’ 1-7/16’’ 1-9/64’’ 06564 3/4’’ 1-1/2’’ 1-3/16’’ Part Descriptions and sizes 12271 Set of 4 pcs 3/8’’ - 1/2’’, 5/8’’ & 3/4’’ 12281 Set of 4 pcs Set - Type 50-UB 5/16’’ - 3/8’’, 7/16’’ & 1/2’’ Part Description and sizes 12270 Set of 4 pcs 3/8’’ - 1/2’’, 5/8’’ & 3/4’’

Bridge reamers - Straight flute Bridge reamers - Spiral flute

Bridge reamers - Straight and spiral flutes - Taper shank high-speed steel , Surface treated

Type 54-UB (Straight flute) Type 55-UB (Spiral flute)

Diameter Flute Total Tapered Diameter Flute Total Tapered Part (Inches) length length chuck Part (Inches) length length chuck 81630 7/16 4-3/8 8-1/4 #2 83310 7/16 4-3/8 8-1/4 #2 81640 1/2 5-1/8 9 #2 83320 1/2 5-1/8 9 #2 81650 9/16 5-1/8 9 #2 83330 9/16 5-1/8 9 #2 81660 5/8 6-1/8 10 #2 83340 5/8 6-1/8 10 #2 81670 11/16 7-1/8 11-3/4 #3 83350 11/16 7-1/8 11-3/4 #3 81680 3/4 7-3/8 12 #3 83360 3/4 7-3/8 12 #3 81690 13/16 7-3/8 12 #3 83370 13/16 7-3/8 12 #3 81700 7/8 7-3/8 12 #3 83380 7/8 7-3/8 12 #3 81710 15/16 7-3/8 12 #3 83390 15/16 7-3/8 12 #3 81720 1 7-3/8 12 #3 83410 1-1/16 7-3/8 12 #3 81730 1-1/16 7-3/8 12 #3 83420 1-1/8 7-3/8 12 #3 81740 1-1/8 7-3/8 12 #3 83430 1-3/16 7-3/8 12 #3 81750 1-3/16 7-3/8 12 #3 83440 1-1/4 7-3/8 13 #4 81760 1-1/4 7-3/8 12 #4 83450 1-5/16 7-3/8 13 #4 81770 1-5/16 7-3/8 13 #4

15 Self-centering drills bits

Type 296 - Standard ‘length’ of 60° & Type 296-XL - Longer than 60 °

Type 296 Drill ends of equal diameter. The included angle is 60 °.

Type 296 - Standard / Self-centering

Diameter Diameter & Package Part Sizes (Inches) length ‘drills bits’ Total length standard 26760 00 1/8’’ .025 x .030 1-7/32’’ 5 26770 0 1/8’’ 1/32 x .038 1-7/32’’ 5 26780 1 1/8’’ 3/64 x 3/64 1-1/4’’ 5 26790 2 3/16’’ 5/64 x 5/64 1-7/8’’ 5 26800 3 1/4’’ 7/64 x 7/64 2’’ 5 26810 4 5/16’’ 1/8 x 1/8 2-1/8’’ 5 26820 5 7/16’’ 3/16 x 3/16 2-3/4’’ 5 26830 6 1/2’’ 7/32 x 7/32 3’’ 5 26840 7 5/8’’ 1/4 x 1/4 3-1/4’’ 1 26850 8 3/4’’ 5/16 x 5/16 3-1/2’’ 1

Set of self-centering drills bits

26861 5pcs sizes: 1, 2, 3, 4 & 5

Type 296-XL The 60 ° angle is suitable for all standard centers.

Type 296-XL / Self-centering

Diameter Drill No Diameter Drill No Part Sizes (Inches) diameter / Pkg Part Sizes (Inches) diameter / Pkg 08603 1 x 3 1/8’’ 3/64’’ 1 08793 5 x 5 7/16’’ 3/16’’ 1 08613 1 x 4 1/8’’ 3/64’’ 1 08803 5 x 6 7/16’’ 3/16’’ 1 08623 1 x 5 1/8’’ 3/64’’ 1 08813 6 x 5 1/2’’ 7/32’’ 1 08633 1 x 6 1/8’’ 3/64’’ 1 08823 6 x 6 1/2’’ 7/32’’ 1 08643 2 x 3 3/16’’ 5/64’’ 1 08833 7 x 6 5/8’’ 1/4’’ 1 08653 2 x 4 3/16’’ 5/64’’ 1 08843 8 x 6 3/4’’ 5/16’’ 1 08663 2 x 5 3/16’’ 5/64’’ 1 08673 2 x 6 3/16’’ 5/64’’ 1 08683 3 x 3 1/4’’ 7/64’’ 1 08693 3 x 4 1/4’’ 7/64’’ 1 08703 3 x 5 1/4’’ 7/64’’ 1 08713 3 x 6 1/4’’ 7/64’’ 1 08723 4 x 4 5/16’’ 1/8’’ 1 08733 4 x 5 5/16’’ 1/8’’ 1 08743 4 x 6 5/16’’ 1/8’’ 1 08753 4-1/2 x 4 3/8’’ 9/64’’ 1 08763 4-1/2 x 5 3/8’’ 9/64’’ 1 08773 4-1/2 x 6 3/8’’ 9/64’’ 1 08783 5 x 4 7/16’’ 3/16’’ 1

16 Hex shank reamers Type 52-UB (Length of Type 53-UB (Length of bridge) Car) Type 52-UB - Type 53-UB Diameter Shank Diameter Shank Hex reamers with black and gold finish, Spiral flute HSS Part (Inches) Hex Part (Inches) Hex 20480 9/16 1-1/16 35580 9/16’’ 1-1/16’’ 20490 5/8 1-1/16 35590 5/8’’ 1-1/16’’ 20510 11/16 1-1/16 35610 11/16’’ 1-1/16’’ 20520 3/4 1-1/4 35620 3/4’’ 1-1/4’’ Hole Hog reamers 20530 13/16 1-1/4 35630 13/16’’ 1-1/4’’ 20540 7/8 1-7/16 35640 7/8’’ 1-7/16’’ 20550 15/16 1-7/16 35650 15/16’’ 1-7/16’’ Type 284-UB 20560 1 1-7/16 35660 1’’ 1-7/16’’ 20570 1-1/16 1-5/8 35670 1-1/16’’ 1-5/8’’ 20500 1-1/8 1-5/8 35600 1-1/8’’ 1-5/8’’ Reamer no conical Hole Hog 4 flutes, 3-flats on shank 20580 1-3/16 1-13/16 35680 1-3/16’’ 1-13/16’’ 20590 1-5/16 2 35690 1-5/16’’ 2’’ 21120 1-3/8 2 Type 284-UB (Hole Hog reamers) 21130 1-7/16 2 - Fractional 21140 1-1/2 2 21150 1-9/16 2 21160 1-5/8 2 Diameter ‘Starting Part (Inches) hole size’ 22030 3/8 1/4 22040 1/2 5/16 Type 284-UB - Sets (Hole Hog reamers) 22060 9/16 3/8 22080 5/8 25/64 Core drill The set 22100 11/16 7/16 Part Drilling sizes 22120 3/4 15/32 size contains 38880 Type 250-UB Type 284-UB 1 each 1/4, 5/16, 25/64 & 15/32 3/8, 1/2, 5/8 & 3/4 Type 250-UB 38870 Type 284-UB 1 each 5/16, 25/64 & 15/32 1/2, 5/8 & 3/4

Type 250-UB Type 284-UB Acrylic drills bits 38860 1 each 1/4, 5/16 & 25/64 3/8, 1/2 & 5/8 Type 183-UB

Acrylic drill bits with ChipfreeTM point

Type 183-UB - Fractional (Acrylic Brad point drills bits) Type 183-UB - Set Diameter Total Length (Acrylic drills bits) Type 16-UB TM Part (Inches) Length flutes Jobber length - Burrout 32260 3/32 2-1/4’’ 1-1/4’’ Part Descriptions and sizes 31500 1/8 2-5/8’’ 1-5/8’’ 31580 Set of 7 pcs 1/8, 3/16, 1/4, 32200 9/64 2-7/8’’ 1-3/4’’ 5/16, 3/8, 7/16 &1/2’’ 31510 5/32 3’’ 2’’ 31520 3/16 3-3/8’’ 2-5/16’’ 32210 13/64 3-21/32’’ 2-7/16’’ 32220 7/32 3-13/16’’ 2-1/2’’ Type 16-UB - Fractional (Brad 31530 1/4 3-15/16’’ 2-3/4’’ Type 16-UB - Sets 32240 9/32 3-9/16’’ 1-31/32’’ point) 32230 19/64 3-23/32’’ 2’’ (Brad point) 31540 5/16 3-13/16’’ 2-1/8’’ Diameter Diameter Descriptions 32290 11/32 4-1/32’’ 2-11/32’’ Part (Inches) Part (Inches) 31550 3/8 4-1/4’’ 2-5/16’’ 01041 5/64 01111 3/16 Part and sizes 32250 25/64 4-11/32’’ 2-9/16’’ 01051 3/32 01131 7/32 42001 Set of 10 pcs 32460 13/32 4-15/32’’ 2-11/16’’ 01061 7/64 01151 1/4 5/64-3/16’’ x 64 + 31560 7/16 4-11/16’’ 2-7/8’’ 01071 1/8 01191 5/16 7/32’’, 1/4’’ 32470 15/32 4-7/8’’ 3-1/16’’ 01081 9/64 01231 3/8 42031 Set of 14 pcs 31570 1/2 5’’ 3-3/16’’ 01091 5/32 01271 7/16 5/64-3/16’’ x 64 + 01101 11/64 01311 1/2 7/32’’, 1/4’’-1/2’’ x 16

17 TM ChatterProof Countersink & Deburring tools Type 82-UB (Piloted and pilotless) Type 90-UB (Deburring) Special high-grade molybdenum steel, gold surface treated tips for maximum lubricity and Chatterproof finish.

Type 82-UB 82° - Countersink with piloted

Part Sizes Style Sizes ‘screw’(A) Diameter ‘shank’ (B) Total length (C) (D) (E) (F) Style 1 - Piloted 67010 CS1/4 1 1/4’’ 1/4’’ 3/8’’ 2’’ 33/64’’ 1’’ 67020 CS1/4A 1 1/4’’ 17/64’’ 3/8’’ 2’’ 33/64’’ 1’’ 67030 CS5/16 1 5/16’’ 5/16’’ 3/8’’ 2-3/16’’ 41/64’’ 1-3/16’’ 67040 CS5/16A 1 5/16’’ 21/64’’ 3/8’’ 2-3/16’’ 41/64’’ 1-3/16’’ 67050 CS3/8 1 3/8’’ 3/8’’ 1/2’’ 2-5/8’’ 49/64’’ 1-3/8’’ 67060 CS3/8A 1 3/8’’ 25/64’’ 1/2’’ 2-5/8’’ 49/64’’ 1-3/8’’ 67070 CS7/16 1 7/16’’ 7/16’’ 1/2’’ 2-3/4’’ 53/64’’ 1-1/2’’ 67080 CS7/16A 1 7/16’’ 29/64’’ 1/2’’ 2-3/4’’ 53/64’’ 1-1/2’’ Style 2 - Pilotless 67090 CS1/2 1 1/2’’ 1/2’’ 1/2’’ 2-13/16’’ 15/16’’ 1-9/16’’ 67100 CS1/2A 1 1/2’’ 33/64’’ 1/2’’ 2-13/16’’ 15/16’’ 1-9/16’’

Type 82-UB 82° - Countersink pilotless ‘Diameter of cut’ Part Sizes Style Min. and Max. Size ‘screw’ Diameter ‘shank’(B) Total length (C) (D) (E) 67110 CS073 3 5/64’’ 15/64’’ 1/4’’ 1-3/4’’ 67120 CS3/16 2 3/16’’ 17/32’’ 1/4’’ 1-15/16’’ 9/16’’ 1’’ 67130 CS307 2 5/16’’ 25/32’’ 1/2’’ 2-5/8’’ 13/16’’ 1-3/8’’ 67140 CS307A 2 5/16’’ 25/32’’ 1/4’’ 2-1/16’’ 13/16’’ 1-1/4’’ 67150 CS431 2 7/16’’ 7/8’’ 1/2’’ 2-13/16’’ 1-1/8’’ 1-9/16’’ 67160 CS1/2B 2 1/2’’ 1-15/32’’ 1/2’’ 3-1/2’’ 1-1/2’’ 2-1/8’’ 67170 CS5S 2 1/8’’ 17/64’’ No. 4 1/4’’ 1-1/2’’ 17/64’’ 5/8’’ 67180 CS6S 2 1/8’’ 19/64’’ No. 6 1/4’’ 1-1/2’’ 19/64’’ 5/8’’ 67190 CS8S 2 1/8’’ 11/32’’ No. 8 1/4’’ 1-5/8’’ 11/32’’ 3/4’’ 67200 CS10S 2 9/64’’ 25/64’’ No. 10 1/4’’ 1-5/8’’ 25/64’’ 3/4’’

Style 3 - Deburring Type 90-UB 90° - Deburring tools ‘Diameter of cut’ Part Sizes Style Min. and Max. Diameter ‘shank’(B) Total length (C) (D) (E) 67210 DB1/64 3 1/64’’ 11/64’’ 3/16’’ 1-1/2’’ 67220 DB1/16 3 1/16’’ 11/64’’ 3/16’’ 1-1/2’’ 67230 DB1/8 3 1/8’’ 15/64’’ 1/4’’ 1-3/4’’ 67240 DB5/32 2 5/32’’ 13/32’’ 1/4’’ 1-11/16’’ 7/16’’ 13/16’’ 67250 DB3/16 2 3/16’’ 17/32’’ 1/4’’ 1-7/8’’ 9/16’’ 1’’ 67260 DB5/16 2 5/16’’ 25/32’’ 1/2’’ 2-19/32’’ 13/16’’ 1-3/8’’ 67270 DB5/16C 2 5/16’’ 25/32’’ 1/4’’ 2-1/32’’ 13/16’’ 1-5/32’’ 67280 DB9/16 2 9/16’’ 1-3/32’’ 1/2’’ 2-13/16’’ 1-1/8’’ 1-9/16’’ 67290 DB1/2 2 1/2’’ 1-15/32’’ 1/2’’ 3-1/2’’ 1-1/2’’ 2-1/8’’

Countersink HSS with 6 flutes and 82 ° without burr Sets - Type 82-UB & 90-UB Type 83-UB Part Sizes Type 83-UB - Countersink HSS 82 ° 10440 Sizes 82-UB C/S: CS5S, CS6S, CS5S Part Sizes Diameter ‘drilling’ Size ‘Shank’ Part Sizes Diameter ‘drilling’ Size ‘Shank’ & CS10S 67700 1/4’’ 6 flutes 67750 6 flutes 1/4’’ 3/4’’ 1/2’’ 10442 Sizes 82-UB C/S: 67710 5/16’’ 6 flutes 1/4’’ 67760 7/8’’ 6 flutes 1/2’’ CS6S, CS8S, CS10S 67720 3/8’’ 6 flutes 1/4’’ 67770 1’’ 6 flutes 1/2’’ & CS3/16S 67730 1/2’’ 6 flutes 3/8’’ 67780 1-1/4’’ 6 flutes 1/2’’ Sizes 90-UB D/B: 67740 5/8’’ 6 flutes 3/8’’ 67790 1-1/2’’ 6 flutes 3/4’’ 10450 DB1/16, DB1/8, DB5/32, DB3/16, Set - Type 83-UB DB5/16 & DB9/16 10443 Sizes 82-UB C/S: Part Sizes Diameter ‘drilling’ Size ‘shank’ CS5S, CS6S, CS8S, 67800 1/4’’, 5/16’’, 3/8’’ & 1/2’’ 6 flutes 1/4’’ & 3/8’’ CS10S, CS1/4, CS5/16, CS3/8, CS7/16 & CS1/2 18 Equivalent Decimal Chart & Drill Size Table Size Size Size Size Size Size Size ‘Drill’ Decimal ‘Drill’ Decimal ‘Drill’ Decimal ‘Drill’ Decimal ‘Drill’ Decimal ‘Drill’ Decimal ‘Drill’ Decimal 00.10 .0039 01.00 .0394 02.50 .0984 3/16 .1875 07.30 .2874 10.80 .4252 7/8 .8750 97 .0059 60 .0400 39 .0995 12 .1890 L .2900 11.00 .4331 22.50 .8858 96 .0063 59 .0410 38 .1015 04.80 .1890 07.40 .2913 7/16 .4375 57/64 .8906 95 .0067 01.05 .0413 02.60 .1024 11 .1910 M .2950 11.20 .4409 23.00 .9055 94 .0071 58 .0420 37 .1040 04.90 .1929 07.50 .2953 11.50 .4528 29/32 .9062 93 .0075 57 .0430 02.70 .1063 10 .1935 19/64 .2969 29/64 .4531 59/64 .9219 92 .0079 01.10 .0433 36 .1065 9 .1960 07.60 .2992 11.80 .4646 23.50 .9252 00.20 .0079 01.15 .0453 7/64 .1094 05.00 .1969 N .3020 15/32 .4688 15/16 .9375 91 .0083 56 .0465 35 .1100 8 .1990 07.70 .3031 12.00 .4724 24.00 .9449 90 .0087 3/64 .0469 02.80 .1102 05.10 .2008 07.80 .3071 12.20 .4803 61/64 .9531 89 .0091 01.20 .0472 34 .1110 7 .2010 07.90 .3110 31/64 .4844 24.50 .9646 88 .0095 01.25 .0492 33 .1130 13/64 .2031 5/16 .3125 12.50 .4921 31/32 .9688 87 .0100 01.30 .0512 02.90 .1142 6 .2040 08.00 .3150 1/2 .5000 25.00 .9843 86 .0105 55 .0520 32 .1160 05.20 .2047 O .3160 13.00 .5118 63/63 .9844 85 .0110 01.35 .0531 03.00 .1181 5 .2055 08.10 .3189 33/64 .5156 1 1.0000 84 .0115 54 .0550 31 .1200 05.30 .2087 08.20 .3228 17/32 .5312 00.30 .0118 01.40 .0551 03.10 .1220 4 .2090 P .3230 13.50 .5315 83 .0120 01.45 .0571 1/8 .1250 05.40 .2126 08.30 .3268 13/64 .5469 82 .0125 01.50 .0591 03.20 .1260 3 .2130 21/64 .3281 14.00 .5512 81 .0130 53 .0595 30 .1285 05.50 .2165 08.40 .3307 9/16 .5625 80 .0135 01.55 .0610 03.30 .1299 7/32 .2188 Q .3320 14.50 .5709 00.35 .0138 1/16 .0625 03.40 .1339 05.60 .2205 08.50 .3346 37/64 .5781 79 .0145 01.60 .0630 29 .1360 2 .2210 08.60 .3386 15.00 .5906 1/64 .0156 52 .0635 03.50 .1378 05.70 .2244 R .3390 19/32 .5938 00.40 .0157 01.65 .0650 28 .1405 1 .2280 08.70 .3425 39/64 .6094 78 .0160 01.70 .0669 9/64 .1406 05.80 .2283 11/32 .3438 15.50 .6102 00.45 .0177 51 .0670 03.60 .1417 05.90 .2323 08.80 .3465 5/8 .6250 77 .0180 01.75 .0689 27 .1440 A .2340 S .3480 16.00 .6299 00.50 .0197 50 .0700 03.70 .1457 15/64 .2344 08.90 .3504 41/64 .6406 76 .0200 01.80 .0709 26 .1470 06.00 .2362 09.00 .3543 16.50 .6496 75 .0210 01.85 .0728 25 .1495 B .2380 T .3580 21/32 .6562 00.55 .0217 49 .0730 03.80 .1496 06.10 .2402 09.10 .3583 17.00 .6693 74 .0225 01.90 .0748 24 .1520 C .2420 23/64 .3594 43/64 .6719 00.60 .0236 48 .0760 03.90 .1535 06.20 .2441 09.20 .3622 11/16 .6875 73 .0240 01.95 .0768 23 .1540 D .2460 09.30 .3661 17.50 .6890 72 .0250 5/64 .0781 5/32 .1562 06.30 .2480 U .3680 45/64 .7031 00.65 .0256 47 .0785 22 .1570 1/4 .2500 09.40 .3701 18.00 .7087 71 .0260 02.00 .0787 04.00 .1575 E .2500 09.50 .3740 23/32 .7188 00.70 .0276 02.05 .0807 21 .1590 06.40 .2520 3/8 .3750 18.50 .7283 70 .0280 46 .0810 20 .1610 06.50 .2559 V .3770 47/64 .7344 69 .0292 45 .0820 04.10 .1614 F .2570 09.60 .3780 19.00 .7480 00.75 .0295 02.10 .0827 04.20 .1654 06.60 .2598 09.70 .3819 3/4 .7500 68 .0310 02.15 .0846 19 .1660 G .2610 09.80 .3858 49/64 .7656 1/32 .0312 44 .0860 04.30 .1693 06.70 .2638 W .3860 19.50 .7677 00.80 .0315 02.20 .0866 18 .1695 17/64 .2656 09.90 .3898 25/32 .7812 67 .0320 02.25 .0886 11/64 .1719 H .2660 25/64 .3906 20.00 .7874 66 .0330 43 .0890 17 .1730 06.80 .2677 10.00 .3937 51/64 .7969 00.85 .0335 02.30 .0906 04.40 .1732 06.90 .2717 X .3970 20.50 .8071 65 .0350 02.35 .0925 16 .1770 I .2720 10.20 .4016 13/16 .8125 00.90 .0354 42 .0935 04.50 .1772 07.00 .2756 Y .4040 21.00 .8268 64 .0360 3/32 .0938 15 .1800 J .2770 10.30 .4055 53/64 .8281 63 .0370 02.40 .0945 04.60 .1811 07.10 .2795 13/32 .4062 27/32 .8438 00.95 .0374 41 .0960 14 .1820 K .2810 Z .4130 21/50 .8465 62 .0380 02.45 0.965 13 .1850 9/32 .2812 10.50 .4134 55/64 .8594 61 .0390 40 .0980 04.70 .1850 07.20 .2835 27/64 .4219 22.00 .8661 Drill sizes Thread Drill Thread Drill Thread Drill Thread Drill 0-80 3/64 6-32 36 M8.0-1.25 H 5/8-11 17/32 M1.6-.35 1.25M 6-40 33 5/16-24 I M16-1.5 14.5M 1-64 54 M3.5-.6 2.90M M8.0-1 7.0M 5/8-18 37/64 M1.8-.35 1.45M M4.0-.7 3.30M 3/8-16 5/16 M18-2.5 15.5M 1-72 53 8-32 29 3/8-24 Q M18-1.5 16.5M M2.0-.4 1.60M 8-36 29 M10-1.5 8.5M 3/4-10 21/32 2-56 51 M4.5-.75 26 M10-1.25 11/32 3/4-16 11/16 M2.2-.45 1.75M 10-24 25 7/16-14 U M20-2.5 17.5M 2-64 50 10-32 21 7/16-20 25/64 M20-1.5 18.5M 3-48 47 M5.0-.8 4.20M M12-1.75 Y 7/8-9 49/64 M2.5-.45 2.05M 12-24 16 1/2-13 27/64 M22-2.5 19.5M 3-56 45 12-28 14 M12-1.25 10.8M M22-1.5 20.5M 4-40 43 M6.0-1 5.0M 1/2-20 29/64 7/8-14 13/16 4-48 42 1/4-20 7 M14-2 12.0M M24-3 21.0M M3.0-.5 2.50M 1/4-28 3 9/16-12 31/64 M24-2 22.0M 5-40 38 M7.0-1 6.0M M14-1.5 12.5M 1-8 7/8 5-44 37 5/16-18 F 9/16-18 33/64 1-12 59/64 M16-2 14.0M 1-14 15/16 19 Taps - Spiral point Taps - Straight flute Type 20-UB & Type 21-UB Type 23-UB, Type 24-UB & Type 25-UB

Spiral point - (Plug Style) Special Hi-Tungsten and Hi-Molybdenum steel tools, with a gold surface for maximum lubricity. Straight flute - (Taper) & (Style Bottoming) Spiral construction drives chips before the tap, allowing higher speeds and faster cutting with For general use in production tapping or operations manual. Precision threads less torque. Precision threads ground for precision and performance ultimate. Recommended f ground for precision and ultimate performance. Taper, plug and styles or stainless steel and other hard metals. Sharp spiral taps are ideal for tapping through hole production. bottoming provide excellent results in hard materials in blind and through holes. These high performance taps are available in sets complete with one type, plug and bottoming of the same size. Type 21-UB (Metric) Type 20-UB - (Plug Style spiral) Part Size 68602 1.6 - 0.35 Type 23-UB - Straight flute (Taper) Part Size Part Size 68612 1.8 - 0.35 60100 0.80 60270 10-32 68622 2.0 - 0.40 60110 1-64 60280 12-24 68632 2.20 - 0.45 Part Size 60120 1-72 60290 12-28 60500 2.5 - 0.45 Part Size Part Size 60880 3/8-24 61460 1’’1/8-12 60130 2-56 60320 1/4-20 60510 3.0 - 0.50 60660 2-56 60890 7/16-14 61470 1’’1/4-7 60140 2-64 60330 1/4-28 60520 3.5 - 0.60 60680 3-48 60900 7/16-20 61480 1’’1/4-12 60150 3-48 60340 5/16-18 60530 4.0 - 0.70 60700 4-40 60910 1/2-13 61490 1’’3/8-6 60160 3-56 60350 5/16-24 68642 4.50 - 0.75 60730 5-40 60920 1/2-20 61500 1’’3/8-12 60170 4-40 60360 3/8-16 60550 5.0 - 0.80 60750 6-32 60950 9/16-12 61510 1’’1/2-6 60180 4-48 60370 3/8-24 60560 6.0 - 1.00 60760 6-40 60960 9/16-18 61520 1’’1/2-12 60190 4-36 60380 7/16-14 68652 7.0 - 1.00 60770 8-32 60970 5/8-11 60200 5-40 60390 7/16-20 68662 8.0 - 1.00 60780 8-36 (Taper Style) 60980 5/8-18 60210 5-44 60400 1/2-13 60580 8.0 - 1.25 60790 10-24 Start the thread 60990 3/4-10 60220 6-32 60410 1/2-20 68672 10.0 - 1.25 60800 10-32 with the tap 61400 3/4-16 60230 6-40 60420 5/8-11 60600 10.0 - 1.50 60810 12-24 holder. 61410 7/8-9 60240 8-32 60430 5/8-18 68682 12.0 - 1.25 60820 12-28 61420 7/8-14 60250 8-36 60440 3/4-10 60620 12.0 - 1.75 60830 1/4-20 61430 1’’-8 60260 10-24 60450 3/4-16 68692 14.0 - 1.50 60840 1/4-28 60630 14.0 - 2.00 60850 5/16-18 61440 1’’-12 68702 16.0 - 1.50 60860 5/16-24 27570 1’’-14 60640 16.0 - 2.00 60870 3/8-16 61450 1’’1/8-7 60650 18.0 - 2.50 68712 20.0 - 2.50 Straight flute - (Plug Style) The taper, grip and bottoming style provide great versatility in hard materials in blind and through holes. These high-performance taps are available in complete sets of a tapping tap and bottoming tap of the same size.

Type 25-UB - Straight flute (Bottoming)

Part Size Part Size Part Size Type 24-UB - Straight flute (Plug Style) 60662 2-56 60882 3/8-24 61462 1’’1/8-12 60682 3-48 60892 7/16-14 61472 1’’1/4-7 Part Size Part Size Part Size 60702 4-40 60902 7/16-20 61482 1’’1/4-12 60732 5-40 60912 1/2-13 61492 1’’3/8-6 60661 2-56 60881 3/8-24 61461 1’’1/8-12 60752 6-32 60922 1/2-20 61502 1’’3/8-12 60681 3-48 60891 7/16-14 61471 1’’1/4-7 60762 6-40 60952 9/16-12 61512 1’’1/2-6 60701 4-40 60901 7/16-20 61481 1’’1/4-12 60772 8-32 60962 9/16-18 61522 1’’1/2-12 60731 5-40 60911 1/2-13 61491 1’’3/8-6 60782 8-36 60972 5/8-11 60751 6-32 60921 1/2-20 61501 1’’3/8-12 60792 10-24 60982 5/8-18 60761 6-40 60951 9/16-12 61511 1’’1/2-6 Set of taps (Plug) 60802 10-32 60992 3/4-10 60771 8-32 60961 9/16-18 61521 1’’1/2-12 60812 12-24 61402 3/4-16 60781 8-36 60971 5/8-11 (Plug Style) 60822 12-28 61412 7/8-9 91623 Set of 10 pcs 60791 10-24 60981 5/8-18 Generally used in through 60832 1/4-20 61422 7/8-14 (1/4 - 20 à 1/2 - 20) 60801 10-32 60991 3/4-10 holes or in blind holes 60842 1/4-28 61432 1’’-8 60811 12-24 61401 3/4-16 Set of taps with sufficient clearance. 60852 5/16-18 61442 1’’-12 60821 12-28 61411 7/8-9 60862 5/16-24 27572 1’’-14 Plug & Taper 60831 1/4-20 61421 7/8-14 60872 3/8-16 61452 1’’1/8-7 60841 1/4-28 61431 1’’-8 91626 Set of 14 pcs 60851 5/16-18 61441 1’’-12 (Style Bottoming) Plug (1/4 - 20 à 3/4 - 10) 60861 5/16-24 27571 1’’-14 Finalize the thread with the tap holder Taper (1/8 - 27 à 1/2 - 14) 60871 3/8-16 61451 1’’1/8-7 Set of taps (Bottoming)

91620 Set of 10 pcs (1/4 - 20 à 1/2 - 20) 20 Taps - Straight flute sets Taps semi-bottoming taps available Type 26-UB fractional and metric Straight flute - Includes a Taper, Plug and Bottoming Style Hi-Helix straight flute - High speed steel

The helical flutes, allow a cut shearing facilitating evacuation chips from the hole.

Titanium nitride Bright finish

Type 26-UB - Sets (Taper, Plug & Bottoming) Fractionnal & metric (Spiral 30 ° & 52 °) The Helix angle of 30 ° - Used when chip removal is a problem. The design of spiral Part Size Part Size Part Size flutes effectively draws chips from the hole. 60663 2-56 60863 5/16-24 27573 1’’-14 The helix angle of 52 ° - Can be used for Plug & Bottoming applications. Allows 60683 3-48 60873 3/8-16 61453 1’’1/8-7 Bottom threading or blind holes. 60703 4-40 60883 3/8-24 61463 1’’1/8-12 60723 4-48 60893 7/16-14 61473 1’’1/4-7 Available : 60733 5-40 60903 7/16-20 61483 1’’1/4-12 30° & 52° - ‘Titanium nitride of carbon’ 60743 5-44 60913 1/2-13 61493 1’’3/4-6 30° & 52° - ‘Titanium nitride’ 60753 6-32 60923 1/2-20 61503 1’’3/8-12 30° & 52° - ‘Bright finish’ 60763 6-40 60953 9/16-12 61513 1’’1/2-6 ‘Titanium nitride of carbon’: 60773 8-32 60963 9/16-18 61523 1’’1/2-12 The coating increases the hardness of the cutting surface, greatly increasing the wear 60783 8-36 60973 5/8-11 resistance. 91623: Set of 10 pcs 60793 10-24 60983 5/8-18 ‘Titanium nitride’: Tap ‘ Straight flute’(Plug) 60803 10-32 60993 3/4-10 The coating adds lubricity and hardness, improving chip flow, finish hole quality 60813 12-24 61403 3/4-16 and drills bits life. 60823 12-28 61413 7/8-9 ‘Bright finish’: 60833 1/4-20 61423 7/8-14 Recommended for aluminum, zinc, copper, wood, refrigerated die-casting, automotive 60843 1/4-28 61433 1’’-8 equipment and epoxy-based plastics. 60853 5/16-18 61443 1’’-12

Taps - Straight flute and ‘Thread on the left’ Type 23L-UB, Type 24L-UB & Type 25L-UB

Straight flute and thread on the left - Taper, plug and style bottoming

Type 23L-UB - Straight and Type 24L-UB - Straight and Type 25L-UB - Straight and thread on the left Style ‘Taper’ thread on the left Style ‘Plug’ thread on the left Style ‘Bottoming’

Part Size Part Size Part Size Part Size Part Size Part Size 60223 6-32 60463 11/16-11 60222 6-32 60462 11/16-11 60224 6-32 60464 11/16-11 60243 8-32 60473 11/16-16 60242 8-32 60472 11/16-16 60244 8-32 60474 11/16-16 60263 10-24 60483 3/4-10 60262 10-24 60482 3/4-10 60264 10-24 60484 3/4-10 60273 10-32 60493 3/4-16 60272 10-32 60492 3/4-16 60274 10-32 60494 3/4-16 60323 1/4-20 60503 7/8-9 60322 1/4-20 60502 7/8-9 60324 1/4-20 60504 7/8-9 60333 1/4-28 60513 7/8-14 60332 1/4-28 60512 7/8-14 60334 1/4-28 60514 7/8-14 60343 5/16-18 60523 1-8 60342 5/16-18 60522 1-8 60344 5/16-18 60524 1-8 60353 5/16-24 60533 1-12 60352 5/16-24 60532 1-12 60354 5/16-24 60534 1-12 60363 3/8-16 60543 1-14 60362 3/8-16 60542 1-14 60364 3/8-16 60544 1-14 60373 3/8-24 60553 1-1/8-7 60372 3/8-24 60552 1-1/8-7 60374 3/8-24 60554 1-1/8-7 60383 7/16-14 60563 1-1/8-12 60382 7/16-14 60562 1-1/8-12 60384 7/16-14 60564 1-1/8-12 60393 7/16-20 60573 1-1/4-7 60392 7/16-20 60572 1-1/4-7 60394 7/16-20 60574 1-1/4-7 60403 1/2-13 60583 1-1/4-12 60402 1/2-13 60582 1-1/4-12 60404 1/2-13 60584 1-1/4-12 60413 1/2-20 60593 1-3/8-6 60412 1/2-20 60592 1-3/8-6 60414 1/2-20 60594 1-3/8-6 60423 9/16-12 60603 1-3/8-12 60422 9/16-12 60602 1-3/8-12 60424 9/16-12 60604 1-3/8-12 60433 9/16-18 60609 1-1/2-6 60432 9/16-18 60612 1-1/2-6 60434 9/16-18 60614 1-1/2-6 60443 5/8-11 60613 1-1/2-12 60442 5/8-11 60619 1-1/2-12 60444 5/8-11 60599 1-1/2-12 60453 5/8-18 60452 5/8-18 60454 5/8-18 Taper style Plug Style Bottoming Start the thread with the tap holder Generally used in through holes or in blind Generate the thread at the bottom holes with sufficient clearance. of the blind holes.

21 Taps - Metric Type 31-UB, Type 32-UB, Type 33-UB

Straight flute metric - (Taper), (Plug) and (Style Bottoming)

Type 31-UB - (Taper) Type 32-UB - (Plug) Type 33-UB - (Bottoming) Size Size Size Part ‘mm’ Part Part ‘mm’ ‘mm’ 61569 1.6-0.35 61561 1.6-0.35 60329 1.6-0.35 61579 1.8-0.35 61571 1.8-0.35 60339 1.8-0.35 61589 2.0-0.40 61581 2.0-0.40 60349 2.0-0.40 61599 2.2-0.45 61591 2.2-0.45 60359 2.2-0.45 61629 2.5-0.45 61681 2.5-0.45 60379 2.5-0.45 61631 3.0-0.50 61682 3.0-0.50 60389 3.0-0.50 61632 3.5-0.60 61683 3.5-0.60 60519 3.5-0.60 61633 4.0-0.70 61684 4.0-0.70 60529 4.0-0.70 61634 4.5-0.75 61689 4.5-0.75 60369 4.5-0.75 61639 5.0-0.80 61691 5.0-0.80 60539 5.0-0.80 61641 6.0-1.00 61692 6.0-1.00 60549 6.0-1.00 61642 7.0-1.00 61693 7.0-1.00 60559 7.0-1.00 61643 8.0-1.00 61694 8.0-1.00 60569 8.0-1.00 61644 8.0-1.25 61699 8.0-1.25 60579 8.0-1.25 61649 10.0-1.25 61701 10.0-1.25 60589 10.0-1.25 61651 10.0-1.50 61702 10.0-1.50 60611 10.0-1.50 61652 12.0-1.25 61703 12.0-1.25 61601 12.0-1.25 61911 12.0-1.50 61921 12.0-1.50 61901 12.0-1.50 61653 12.0-1.75 61704 12.0-1.75 61602 12.0-1.75 61654 14.0-1.50 61709 14.0-1.50 61603 14.0-1.50 61659 14.0-2.00 61711 14.0-2.00 61604 14.0-2.00 61661 16.0-1.50 61712 16.0-1.50 61609 16.0-1.50 61662 16.0-2.00 61713 16.0-2.00 61611 16.0-2.00 61282 18.0-1.50 61283 18.0-1.50 61281 18.0-1.50 61663 18.0-2.50 61714 18.0-2.50 61612 18.0-2.50 66362 20.0-1.50 66363 20.0-1.50 66361 20.0-1.50 61664 20.0-2.50 61719 20.0-2.50 61613 20.0-2.50 66372 22.0-1.50 66373 22.0-1.50 66371 22.0-1.50 66382 22.0-2.50 66383 22.0-2.50 66381 22.0-2.50 66392 24.0-2.00 66393 24.0-2.00 66391 24.0-2.00 61669 24.0-3.00 61721 24.0-3.00 61614 24.0-3.00 66402 27.0-2.00 66403 27.0-2.00 66401 27.0-2.00 61671 27.0-3.00 61722 27.0-3.00 61619 27.0-3.00 66412 30.0-2.00 66413 30.0-2.00 66411 30.0-2.00 61672 30.0-3.50 61723 30.0-3.50 61621 30.0-3.50 66422 33.0-2.00 66423 33.0-2.00 66421 33.0-2.00 61673 33.0-3.50 61724 33.0-3.50 61622 33.0-3.50 66432 36.0-3.00 66433 36.0-3.00 66431 36.0-3.00 61674 36.0-4.00 61729 36.0-4.00 61623 36.0-4.00 66442 39.0-3.00 66443 39.0-3.00 66441 39.0-3.00 61679 39.0-4.00 61731 39.0-4.00 61624 39.0-4.00

Taps - Metric sets

Straight flute metric - includes a (Taper), (Plug) & (Bottoming) Type 35-UB Sets (Taper - Plug - Bottoming) Taps - Metric sets Size Number Size Number Part ‘mm’ of flutes Part ‘mm’ of flutes Metric taps & ‘Straight flute’ taps 3.0-0.50 3 61759 12.0-1.25 4 61741 Sets (Plug) 61742 4.0-0.70 4 61761 12.0-1.75 4 61743 5.0-0.80 4 61762 14.0-1.50 4 61744 6.0-1.00 4 61763 14.0-2.00 4 Part Descriptions and sizes 61749 7.0-1.00 4 61764 16.0-1.50 4 Set of (15 taps) metric (Plug) 91622 61751 8.0-1.00 4 61769 16.0-2.00 4 3.0-0.50 to 14.0-1.50 61752 8.0-1.25 4 61772 18.0-2.50 4 61753 10.0-1.25 4 61774 20.0-2.50 4 61754 10.0-1.50 4 22 Reduced neck taps Type 29-UB

Reduced neck taps - High-Speed spiral point Reduced neck taps for tapping applications. The reduced neck maximizes the coolant flow rate in the machine's tapping application for ferrous and non-ferrous materials. Excellent for aluminum, magnesium, malleable cast iron and stainless steel materials. Hi-Molybdenum steel tools, with a golden surface for power maximum lubricant. Reduced collar provides maximum torsional strength for tapping applications.

Type 29-UB - Tap ‘High-Speed spiral point’

Part Size Part Size 44264 2-56 20023 1/4-28 44284 3-48 20020 1/4-28A 44300 4-40 20033 5/16-18 44294 4-48 20030 5/16-18A 44304 5-40 20043 5/16-24 44309 5-44 20040 5/16-24A 44310 6-32 20050 3/8-16 44320 6-40 20060 3/8-24 44334 8-32 20100 7/16-14 44330 8-32A 20110 7/16-20 44344 8-36 20120 1/2-13 44340 8-36A 20130 1/2-20 44354 10-24 20163 9/16-12 44350 10-24A 20173 9/16-18 44364 10-32 20183 5/8-11 44360 10-32A 20193 5/8-18 44374 12-24 20203 3/4-10 44370 12-24A 20213 3/4-16 44384 12-28 20223 7/8-9 44380 12-28A 20233 7/8-14 20013 1/4-20 20243 1-8 20010 1/4-20A 20253 1-14 Type 30-UB - Taper pipe taps Taper pipe taps ‘NPT’ ‘NPT’ Size Type 30-UB Part Size NPT drilling Special Hi-Tungsten and Hi-Molybdenum steel tools with a golden surface, high quality appearance. 60570 1/16-27 D Precision threads ground for ultimate precision and performance. Available in intermediate style with 3 to 3 1/2 61240 1/8-27 (5/16 Shank) 11/32 thread chamfer. 61250 1/8-27 11/32 61260 1/4-18 7/16 61270 3/8-18 37/64 61280 1/2-14 23/32 Hexagon high-speed steel dies 61290 3/4-14 59/64 61300 1’’-11-1/2 1-5/32 Type 27-UB 61310 1-1/4-11-1/2 1-1/2 Hi-Molybdenum stainless steel tools, polished gold finish with black surface treated nets for long life 61320 1-1/2-11-1/2 1-47/64 and rich appearance. These dies are used to screw rods, bolts, studs and other parts that require external threads. 61330 2-11-1/2 2-7/32 The hexagonal outer configuration allows the use of support and die.

Type 27-UB - Hexagon high-speed steel dies Type 27-UB - HSS Part Size Part Size metric dies 61000 4-40 61140 1/2-13 61010 6-32 61150 1/2-20 Part Size 61020 8-32 61160 9/16-12 60511 3.0 x 0.50 61030 10-24 61170 9/16-18 60521 3.5 x 0.60 61040 10-32 61180 5/8-11 60531 4.0 x 0.70 61050 12-24 61190 5/8-18 60551 5.0 x 0.80 61060 1/4-20 61200 3/4-10 60561 6.0 x 1.00 61070 1/4-28 61210 3/4-16 60581 8.0 x 1.25 61080 5/16-18 61220 1/8-27 60601 10.0 x 1.50 61090 5/16-24 61230 1/4-18 60621 12.0 x 1.75 61100 3/8-16 60622 14.0 x 1.50 61110 3/8-24 61120 7/16-14 61130 7/16-20 23 Sets of drills bits and taps Reduced neck taps - High speed spiral point (HSS) Spiral point, NC Part Sizes 57580 Type 240-UB Spiral point, NC #36, 29, 25, 21, 7, F, 5/16, U & 27/64 Part Sizes ------Type 20-UB 58501 Type 240-UB 6-32, 8-32, 10-24, 10-32, Drill bit sizes #36, 29, 25, 21, 7 & F Sizes ‘tap’ ------1/4-20, 5/16-18, 3/8-16, Type 20-UB 7/16-14 & 1/2-13 Sizes ‘tap’ 6-32, 8-32, 10-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14 & 1/2-13

Spiral point, metric Straight flute, NC Part Sizes Part Sizes 57990 Type 643-UB Type 240-UB Sizes ‘Drill bit’ 2.05, 2.50, 2.90, 3.30, 60930 #36, 29, 25, 21, 7, F, (mm) 4.20, 5.00, 6.70, 8.50 Drill bit sizes 5/16, U & 27/64 & 10.20 ------Sizes ‘tap’ Type 24-UB Sizes ‘tap’ Type 21-UB 6-32, 8-32, 10-24, 10-32, Straight flute, NF (mm) 2.5-.45, 3.0-.50, 3.5-.60, 1/4-20, 5/16-18, 3/8-16, 4.0-.70, 5.0-.80, 6.0-1.00, 7/16-14 & 1/2-13 8.0-1.25, 10.0-1.50 & Part Sizes 12.0-1.75 60940 Type 240-UB Drill bit sizes #33, 29, 25, 21, 1, 25/64 & 29/64 ------Sizes ‘tap’ Type 24-UB Spiral point, NF Spiral point, NC 6-40, 8-36, 10-24, 10-32, 1/4-28, 5/16-24, 3/8-24, Part Sizes Part Sizes 7/16-20 & 1/2-20 58010 Type 240-UB 58500 Drill bit sizes Drill bit sizes #33, 29, 25, 21, 3, 1, Sizes ‘tap’ Type 240-UB Q, 25/64 & 29/64 31/64 Type 24-UB ------Type 280-UB Sizes ‘tap’ Type 20-UB 9/16-12, 5/8-11, 17/32, 21/32, 6-40, 8-36, 10-24, 10-32, 3/4-10, 7/8-9 49/64 & 7/8 1/4-28, 5/16-24, 3/8-24, & 1’’-8 7/16-20 & 1/2-20

Sets taps Sets taps - Spiral point & straight flute

Spiral point Straight flute Part Sizes Part Sizes 61600 Type 20-UB 61620 Type 24-UB 0-80, 1-64, 1-72, 2-56, 2-64, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3-48, 3-56, 4-40, 4-48, 5-40, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 5-44, 6-32, 6-40, 8-32, 8-36, 1/2-13 & 1/2-20 10-24, 10-32, 12-24 & 12-28

Spiral point Part Sizes 61610 Type 20-UB 1/4-20 , 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20

24 HSS Taps & assortments of dies 25pcs / 23pcs / 15pcs / 14pcs

Set ultra-Bor spiral point, Tap (Plug) and dies hexagonal ‘25 pcs’ The set contains: - HSS spiral point taps & HSS sizes of the dies hexagonal: 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20 - HSS Tap NPT and die hexagonal size: 1/8-27 NPT. - T-: 3/16’’ - 1/2’’. - Die holder & a net gauge. Supplied in a sturdy plastic case. Part# 35173 Part# 35173

Set ultra-bor metric spiral point, and dies hexagonal ‘23 pcs’ The set contains: - HSS spiral point taps & HSS die sizes hexagonal: 3.0 -.50, 3.5 -.60, 4.0 -.70, 5.0 -.80, 6.0 -1.00, 8.0 -1.25, 10.0 -1.50 & 12.0 -1.75 - HSS Tap NPT and die hexagonal size: 1/8-27 NPT. - T-tap wrench: 0 - 1/4’’ & 3/16’’ - 1/2’’. - Tap wrench with straight handle: #4 - 1/2’’ - Die holder & metric net gauge. Supplied in a sturdy plastic case. Part# 35170

Set ultra-bor spiral point (plug) , and dies hexagonal ‘15 pcs’ The set contains: - HSS spiral point taps & HSS die sizes hexagonal: 6-32, 8-32, 10-24, 10-32, 12-24 & 1/4-20. - T-tap wrench: 0 - 1/4’’. - Die holder & a net gauge. Supplied in a sturdy plastic case. Part# 35174

Set ultra-bor metric spiral point, and dies hexagonal ‘14 pcs’ The set contains: - HSS spiral point taps: 2.5 -.45, 3.0 -.50, 3.5 -.60, 4.0 -.70, 5.0 -.80 & 6.0 -1.00. - HSS die sizes hexagonal: 3.0 -.50, 3.5 -.60, 4.0 -.70, 5.0 -.80 & 6.0 -1.00. - T-tap wrench: 0 - 1/4’’. Economic die holder and metric net gauge. Supplied in a sturdy plastic case. Part# 35172

25 HSS taps & assortments of dies 58 pcs & 40 pcs

Recommended for use in production tapping and drilling in stainless steel working grades and other hard metal applications. Rectified precision threads for optimum performance.

Set ultra-Bor straight flute and dies hexagonal ‘58 pcs’ The set contains: - HSS flute of straight taps & HSS sizes dies hexagonal: 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10, 3/4-16, 1/8-27 NPT & 1/4-18 NPT. - Tap wrench with straight handle: #4-1/2’’ & 1/4’’-3/4’’ - Die support: MED R/H & 1’’R/H - T-tap wrench: 0-1/4’’ - Net gauges. - Spiral extractor with support: EX 1 through EX 5. Supplied in a sturdy plastic case. Part# 61680

Part# 61680

Set Ultra-Bor straight flute and dies hexagonal ‘40 pcs’ The set contains: - HSS taps straight flutes & HSS sizes dies hexagonal: 4-40, 6-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20 - HSS tap NPT size of dies hexagonal: 1/8-27 NPT. - T-tap wrench: 0-1/4’’ & 3/16’’-1/2’’ - Tap wrench with straight handle: #4 - 1/2’’ - Die support, net gauges. Supplied in a sturdy plastic case. Part# 35171

Set ultra-Bor spiral point and dies hexagonal ‘40 pcs’ Part# 35171 L’ensemble contient: - HSS taps straight flutes & HSS sizes dies hexagonal: 4-40, 6-32, 10-24, 10-32, 12-24, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-20, 1/2-13 & 1/2-20 - HSS tap NPT and size of the die hexagonal: 1/8-27 NPT. - T-tap wrench: 0-1/4’’ & 3/16’’-1/2’’ - Tap wrench with straight handle: #4 - 1/2’’ - Die support, net gauges Supplied in a sturdy plastic case. Part# 35181

26 Combination drill bit and tap Type 40-UB Hi-Molybdenum steel tools ensure a longer life. The combination drill and taps are ideal for tapping on site in the areas of construction, maintenance and repair, assembly and production. The split point, self-centering provides excellent drilling accuracy.

Split point Shank with 3-Flats

The pitch diameter and thread tolerances are designed to produce a Class 2B fit.

Length Size Length Part Size Thickness materials (Max) ‘thread’ Part ‘mm’ Thickness materials (Max) ‘thread’ 73770 4-40 0.368 0.564 85921 3.0 x 0.5 0.403 0.624 73780 4-48 0.369 0.564 85931 4.0 x 0.7 0.538 0.376 73790 5-40 0.403 0.624 85941 5.0 x 0.8 0.610 0.496 73800 5-44 0.404 0.624 85951 6.0 x 1.00 0.746 0.626 73810 6-32 0.468 0.376 85961 7.0 x 1.00 0.882 0.686 73820 6-40 0.470 0.376 85971 8.0 x 1.25 0.892 0.686 73830 8-32 0.539 0.376 85991 10.0 x 1.50 1.037 0.746 73840 8-36 0.540 0.376 86001 12.0 x 1.75 1.373 0.942 73850 10-24 0.606 0.496 73860 10-32 0.608 0.496 73870 12-24 0.677 0.496 73880 12-28 0.678 0.496 Part Sets Description (Sizes) 73890 1/4-20 0.746 0.626 21330 40-UB - DT-6 Set of 6 pcs 73900 1/4-28 0.750 0.626 6-32, 8-32, 10-24, 10-32, 12-24 & 1/4-20 73910 5/16-18 0.889 0.683 ------73920 5/16-24 0.893 0.683 73990 40-UB - DT-7C Set of 7 pcs 73930 3/8-16 1.031 0.746 Coarse 8-32, 10-24, 1/4-20, 5/16-18, 73940 3/8-24 1.036 0.746 3/8-16, 7/16-14 & 1/2-13 ------73950 7/16-14 1.172 0.882 73991 40-UB - DT-7F Set of 7 pcs 73960 7/16-20 1.178 0.880 Delicate 8-36, 10-32, 1/4-28, 5/16-24, 73970 1/2-13 1.378 0.940 3/8-24, 7/16-20 & 1/2-20 73980 1/2-20 1.384 0.940 ------75540 9/16-12 1.395 0.940 73992 40-UB - 7 - M Set of 7 pcs 75550 9/16-18 1.403 0.940 Metric 4.0 x .07 - 12.0 x 1.75 75560 5/8-11 1.412 0.940 75570 5/8-18 1.421 0.940 The pitch diameter and thread tolerances are designed to produce a class 6H fit.

Drills bits and taps with quick release 1/4’’

Type 40-QR The pitch diameter and thread tolerances are designed to produce a Class 2B fit.

Length Size Length Part Size Thickness materials (Max) ‘thread’ Part ‘mm’ Thickness materials (Max) ‘thread’ 73814 6-32 0.170 0.283 85924 3.0 x 0.50 0.170 0.334 73834 8-32 0.200 0.283 85934 4.0 x 0.70 0.170 0.269 73854 10-24 0.200 0.363 85044 5.0 x 0.80 0.200 0.404 73864 10-32 0.200 0.363 85954 6.0 x 1.00 0.230 0.376 73874 12-24 0.200 0.369 85974 8.0 x 1.25 0.480 0.638 73894 1/4-20 0.230 0.326 85994 10.0 x 1.50 0.480 0.595 73904 1/4-28 0.230 0.326 73914 5/16-18 0.480 0.614 73934 3/8-16 0.480 0.585 The pitch diameter and thread tolerances are designed to produce a class 6H fit. Part Set Description of sizes 21324 40-QR DT-5 Set of 5 pcs 6-23, 8-32, 10-24, 10-32 & 1/4-20

27 Hi-Carbon steel taps

Hi-Carbon steel taps - U.S. Sizes (Plug - & Taper - ) Type 721 -Intermediate - Machine screw, Type 720 - Intermediate - Fractional, Plug (Intermediate) - Type 721 Type 741 - Machine screw (Beginner), Type 740 - Fractional (Beginner) * Made of heavy duty Hi-Carbon steel, these taps are ideal for manual tapping and re-threading applications.

Taper (Beginner) - Type 741

Type 721 - Plug (Intermediate) Machine screw Type 741 - Taper (Beginner) Machine screw Part Sizes 54860 0x80 Part Sizes 54870 1x64 54790 0x80 54880 1x72 54800 1x64 54890 2x56 54810 1x72 54900 2x64 54820 2x56 54910 3x48 54830 2x64 54920 3x56 54840 3x48 55750 4x36 54850 3x56 55760 4x40 55900 4x36 55770 5x40 55910 4x40 55780 6x32 55920 5x40 55790 6x40 55930 6x32 55800 6x48 55940 6x40 55810 8x32 55950 6x48 55820 8x36 55960 8x32 55830 8x40 55970 8x36 55840 10x24 55980 8x40 55850 10x32 55990 10x24 55860 12x24 56000 10x32 55870 12x28 56010 12x24 55880 14x20 56020 12x28 56030 14x20

Type 720 - Plug (Intermediate) Fractional Type 740 - Taper (Beginner) Fractional

Parts Sizes Parts Sizes 55250 3/16x24 55010 3/16x24 55260 3/16x32 55020 3/16x32 Hi-Carbon Tap Set Type 720 - Plug 55270 1/4x20 55030 1/4x20 55280 1/4x28 55040 1/4x28 91627 Set of 10 pcs 55290 5/16x18 55050 5/16x18 (1/4 - 20 à 1/2 - 20) 55300 5/16x24 55060 5/16x24 55310 3/8x16 55070 3/8x16 55320 3/8x24 55080 3/8x24 55330 7/16x14 55090 7/16x14 55340 7/16x20 55100 7/16x20 55350 1/2x13 55110 1/2x13 55360 1/2x20 55120 1/2x20 55370 9/16x12 55130 9/16x12 55380 9/16x18 55140 9/16x18 55390 5/8x11 55150 5/8x11 55460 5/8x18 55720 5/8x18 55470 11/16x11 55730 11/16x11 55480 11/16x16 55740 11/16x16 55400 3/4x10 55160 3/4x10 55710 3/4x16 55890 3/4x16 55410 7/8x9 55170 7/8x9 55420 7/8x14 55180 7/8x14 55430 1x8 55190 1x8 55440 1x12 55200 1x12 55450 1x14 55210 1x14

Taper (Beginner) Type 740 & 741 Plug (Intermediate) Type 720 & 721 Eight to ten chamfered threads for easy-to-use threading Three to five chamfered threads. For general use when tapping, from tough materials. can magnify holes without problem. (This is the most used style.) 28 Hi-Carbon steel taps

Hi-Carbon steel taps - U.S. Sizes (Bottoming - Finishing & (3 pcs) Sets) Type 761 - Finishing - Machine screw, Type 760 - Finishing - Fractional, Type 723 - (3 pcs) Sets - Machine screw, Type 722 - (3 pcs) Sets - Fractional

Bottoming (Finishing) - Type 761

Type 761 - Bottoming (Finishing) Machine screws

Part Sizes 54930 0x80 Type 723 - (3 pcs) Sets Machine screws 54940 1x64 54950 1x72 Part Sizes 54960 2x56 56600 4x36 54970 2x64 56610 4x40 54980 3x48 56620 5x40 54990 3x56 56630 6x32 56100 4x36 56640 6x40 56110 4x40 56650 6x48 56120 5x40 56660 8x32 56130 6x32 56670 8x36 56140 6x40 56680 8x40 56150 6x48 56690 10x24 56160 8x32 56700 10x32 56170 8x36 56710 12x24 56180 8x40 56720 12x28 56190 10x24 56730 14x20 56200 10x32 56210 12x24 56220 12x28 56230 14x20

Type 760 - Bottoming (Finishing) Fractional Type 722 - (3 pcs) Sets Fractional

Part Sizes Part Sizes 56300 3/16x24 55500 3/16x24 56310 3/16x32 55510 3/16x32 56320 1/4x20 55520 1/4x20 56330 1/4x28 55530 1/4x28 56340 5/16x18 55540 5/16x18 56350 5/16x24 55550 5/16x24 56360 3/8x16 55560 3/8x16 56370 3/8x24 55570 3/8-24 56380 7/16x14 55580 7/16x14 56390 7/16x20 55590 7/16x20 56400 1/2x13 55600 1/2x13 56410 1/2x20 55610 1/2x20 56420 9/16x12 55620 9/16x12 56430 9/16x18 55630 9/16x18 56440 5/8x11 55640 5/8x11 56590 5/8x18 56040 5/8x18 56740 11/16x11 56050 11/16x11 56750 11/16x16 56060 11/16x16 56450 3/4x10 55650 3/4x10 56760 3/4x16 56070 3/4x16 56460 7/8x9 55660 7/8x9 56470 7/8x14 55670 7/8x14 56480 1x8 55680 1x8 56490 1x12 55690 1x12 56500 1x14 55700 1x14

Bottoming (Finishing) Type 760 & 761 One and - two chamfered threads. To be used after the start of the threads with the tapping to the bottom of a hole.

29 Hi-Carbon steel dies

Hi-Carbon steel dies - Hex dies Type 405 - Machine screw & Fractionnal sizes, Type 790 - Metric - These dies are made from high quality Hi-Carbon tool steel and meet the highest industry standards. - A complete selection of solid round, adjustable round and solid hexagonal dies for right hand threads are available. - Some die sizes can be imported.

Type 405 - Machine screws & Sizes fractional Type 790 - Metric Sizes Part Sizes 86000 4x40 Part Sizes 86010 4x36 84000 3x.50 86020 5x40 84010 3x.60 86030 6x32 84020 4x.70 86040 8x32 84030 4x.75 86050 10x24 84040 5x.80 86060 10x32 84050 5x.90 86070 12x24 84060 6x1.00 86080 14x20 84070 7x1.00 86100 3/16x24 84270 8x1.00 86110 3/16x32 84080 8x1.25 86120 1/4x20 84090 9x1.00 86130 1/4x28 84100 9x1.25 86140 5/16x18 84110 10x1.00 86150 5/16x24 84120 10x1.25 86160 3/8x16 84130 10x1.50 86170 3/8x24 84140 11x1.50 86180 7/16x14 84280 12x1.25 86190 7/16x20 84150 12x1.50 86200 1/2x13 84160 12x1.75 86210 1/2x20 84170 14x1.25 86220 9/16x12 84290 14x1.50 86230 9/16x18 84180 14x2.00 86240 5/8x11 84190 16x1.50 86250 5/8x18 84200 16x2.00 86260 11/16x11 84210 18x1.50 86270 11/16x16 84300 18x2.00 86280 3/4x10 84220 18x2.50 86290 3/4x16 86300 7/8x9 86310 7/8x14 86320 1x8 86330 1x12 86340 1x14 86350 1/8x27 Hexagonal dies: Tips 86360 1/4x18 86380 3/8x18 Hi-Carbon steel dies are mainly used to restore damaged threads. 86390 1/2x14 The hexagonal shape is particularly useful in cramped areas with 86420 3/4x14 a key. 86430 1-11-1/2’’

30 Hi-Carbon steel dies

Hi-Carbon steel dies - Adjustable & Round Type 400 - Round, Type 415 - Adjustable - These dies are made from Hi-Carbon tool steel and meet the highest industry standards. - We offer a complete selection of solid and adjustable rounds for right-hand threads. - Some die sizes can be imported.

Type 415 - Adjustable Machine screw & Fractional

Type 400 - Round Machine screw & Fractional Part Sizes 85000 0x80 Part Sizes 85010 1x64 53600 4x36 85020 1x72 53610 4x40 85030 2x56 53620 5x40 85040 2x64 53630 6x32 85050 3x48 53640 8x32 85060 3x56 53650 10x24 85070 4x40 53660 10x32 85080 4x36 53670 12x24 85090 5x40 53680 14x20 85100 6x32 53690 3/16x24 85110 8x32 53700 3/16x32 85120 10x24 53710 1/4x20 85130 10x32 53720 1/4x28 85140 12x24 53730 5/16x18 85150 14x20 53820 5/16x24 85170 3/16x24 54740 3/8x16 85180 3/16x32 53750 3/8x24 85190 1/4x20 53760 7/16x14 85200 1/4x28 53830 7/16x20 85210 5/16x18 53770 1/2x13 85220 5/16x24 53780 1/2x20 85230 3/8x16 53790 1/2x24 85240 3/8x24 53800 1/8x27 (Pipe) 85250 7/16x14 53810 1/4x18 (Pipe) 85260 7/16x20 85270 1/2x13 85280 1/2x20 85290 9/16x12 85300 9/16x18 85310 5/8x11 Adjustable & Round dies: Tips 85320 5/8x18 85330 11/16x11 Adjustable dies: 11/16x16 These dies, have a recessed adjustment screw so that the threads 85340 can be cut slightly under or oversized. 85350 3/4x10 Round dies: 85360 3/4x16 Inexpensive round dies are 1 "wide. 85370 7/8x9 They will thread rods up to 1/2 "in diameter. 85380 7/8x14 85390 1x8 85400 1x12 85410 1x14 85420 1/8x27 85430 1/4x18 85440 3/8x18 85450 1/2x14

31 Hi-Carbon taps - Metric plug & Taps (NPT)

Type 780 - Metric plug - All popular sizes are offered for the threading needs of foreign cars, motorcycles and machinery.

Type 410 - Taps (NPT) - Made of carbon steel resistant to industry standards. Type 780 - Metric plug

Parts Sizes 83010 3x.50 83020 3x.60 83030 4x.70 83040 4x.75 83050 5x.80 83060 5x.90 83070 6x1.00 Type 410 - Taps (NPT) Fractional 83080 7x1.00 84230 8x1.00 83090 8x1.25 Parts Sizes 83100 9x1.00 56910 1/8 x 27 83110 9x1.25 56920 1/4 x 18 56800 10x1.00 56930 3/8 x 18 83130 10x1.25 56940 1/2 x 14 83140 10x1.50 56950 3/4 x 14 83150 11x1.50 56960 1 x 11-1/2 84240 12x1.25 56970 1-1/4 x 11-1/2 83160 12x1.50 56980 1-1/2 x 11-1/2 83170 12x1.75 56990 2 x 11-1/2 56810 14x1.25 84250 14x1.50 83190 14x2.00 83200 16x1.50 83210 16x2.00 56820 18x1.50 84260 18x2.00 83230 18x2.50

Metric Hi-Carbon Tap Set 91625 Set of 15 pcs 3.0 x.50 to 14.0 x 1.25mm

32 Hi-Carbon Tap and Die Sets of 14 pcs / 16 pcs

Type 724 Made of high carbon steel. Sharp, aggressive cutting edge, hardened and hardened for fast cutting. The sets are available in round and hexagonal styles. The sets are packaged in plastic cases.

Fractional Hi-Carbon steel (Set) NC - With set of dies hexagonal ‘14 pcs’ The set contains: - High Carbon Steel Taps and Dies hexagonal: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 1/8-27 NPT Pipe - T-tap wrench: 3/16 à 1/2 Supplied in a sturdy plastic case. Metric hi-carbon steel (Set) Part# 50090 - With set of dies hexagonal ‘16 pcs’ The set contains: - Sizes of high carbon steel taps and dies hexagonal: 4 mm x 0.70, 5 mm x 0.80, 6 mm x 1.00, Fractional Hi-Carbon steel (Set) NF 8 mm x 1.25, 10 mm x 1.50, 12 mm x 1.50 - T-tap wrench: 3/16 à 1/2 - With set of dies hexagonal Part# 50140 ‘14 pcs’ The set contains: - High Carbon Steel Taps and Dies hexagonal: 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 1/8-27 NPT Pipe Fractional Hi-Carbon steel (Set) NC - T-tap wrench: 3/16 à 1/2 Supplied in a sturdy plastic case. - With set of dies hexagonal Part# 50020 ‘16 pcs’ The set contains: - High carbon steel taps and hexagonal: 4-40, 6-32. 8-32. 10-24, 10-32, Fractional Hi-Carbon steel (Set) NC 12-24 & 1/4-20 - With set of dies round - T-tap wrench: 0 à 1/4 Part# 50100 ‘14 pcs’ The set contains: - Hi-Carbon steel taps and die round sizes: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 1/8-27 NPT Pipe - T-tap wrench: 3/16 à 1/2 Supplied in a sturdy plastic case. Part# 50030 Fractional Hi-Carbon steel (Set) NC - With set of dies round

‘16 pcs’ The set contains: - High carbon steel taps and dies round: Fractional Hi-Carbon steel (Set) NF 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20 - With set of dies round - T-tap wrench: 0 à 1/4 Part# 50040 ‘14 pcs’ The set contains: - Hi-Carbon steel taps and die round sizes: 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 1/8-27 NPT Pipe - T-tap wrench: 3/16 à 1/2 Supplied in a sturdy plastic case. Part# 50020

33 Hi-Carbon Tap and die sets of 24 pcs / 37 pcs

Type 724

Made of high carbon steel. The taps Plug are provided in all sets. The dies are available in all round and hexagonal styles. The sets are packaged in sturdy plastic cases.

Fractional Hi-Carbon steel (Set) NC, NF - With set of dies hexagonal ‘24 pcs’ The set contains: - High Carbon Steel Taps and Dies Hexagonal: 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27 NPT Pipe - T-tap wrench: 3/16 à 1/2 - Economic die support Part# 50110 Metric Hi-Carbon steel (Set) - With set of dies hexagonal ‘37 pcs’ The set contains: - High Carbon Steel Taps and Dies hexagonal: 3 mm x 0.50, 3 mm x 0.60, 4 mm x 0.70, 4 mm x 0.75, 5 mm x 0.80, 5 mm x 0.90, 6 mm x 1.00, 7 mm x 1.00, Fractional Hi-Carbon steel (Set) NC, NF 8 mm x 1.25, 9 mm x 1.00, 9 mm x 1.25, 10 mm x 1.25, - With set of dies round 10 mm x 1.50, 11 mm x 1.50, 12 mm x 1.50, 12 mm x 1.75 & 1/8-27 NPT ‘24 pcs’ - T-tap wrench: 0 à 1/4 & 3/16 à 1/2 The set contains: - Economic die support - High carbon steel taps and dies round: Part# 50150 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27 NPT Pipe - T-tap wrench: 3/16 à 1/2 - Economic die support Part# 50050 Fractional Hi-Carbon steel (Set) NC, NF - with set dies hexagonal ‘37 pcs’ The set contains: - Hi-Carbon steel taps and dies hexagonal: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20 & 1/8-27 Fractional Hi-Carbon steel (Set) NC, NF NPT Pipe - With set of dies round - T-tap wrench: 0 à 1/4 & 3/16 à 1/2 - Economic die support ‘37 pcs’ Part# 50120 The set contains: - Hi carbon steel taps and dies round: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20 & 1/8-27 NPT Pipe - T-tap wrench: 0 à 1/4 & 3/16 à 1/2 - Economic die support Part# 50060

34 Hi-Carbon Steel Tap and Die Sets / Fractional 40 pcs

Type 724

The taps and dies are made of high carbon steel. The taps Plug are provided in all sets and sizes to fulfill most requirements. The dies are available in round and hexagonal styles. The sets are packaged in durable plastic cases.

Fractional Hi-Carbon steel (Set) NC, NF - With set of dies round ‘40 pcs’ The set contains: - High carbon steel taps and dies round: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20,1/2-13, 1/2-20 & 1/8-27 NPT Pipe - T-tap wrench: 0 à 1/4 & 3/16 à 1/2 - Tap and reamer support: #4 x 1/2 - Adjustable die holder, screwdriver and net gauges Part# 50070

Fractional Hi-Carbon steel (Set) NC, NF - With set of dies hexagonal ‘40 pcs’ The set contains: - High Carbon Steel Taps and Dies Hexagonal: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20 & 1/8-27 NPT Pipe - T-tap wrench: 0 à 1/4 & 3/16 à 1/2 - Tap and reamer support: 0 x 1/2 - Adjustable die holder, screwdriver and net gauges Part# 50130

35 Support à filières et jauges à filet Support à filières et jauges à filet - -Des Des accessoi accessoiresres pour pour Dietout tout tr at rvasupportailvail de de fil filetaegtae,g e,économi économi& Netque,que, pe gaugesperforrfmantormant et deet detype type pr opfressionnel.ofessionnel. -- - ConDes Cons accessoitsrtuctionruction rresobu robu pourste.ste. tOffeout Offe trrta renvt ailen diffé dediffé rfilentsreentsta gfoe, fr omatséconomirmats comme commeque, indipe indirfqoués.rqmantués. et de type professionnel. - Con- Desstruction accessoi roburess te.pour Offe toutrt entra vdifféail derents file ftaogrmatse, économi commeque, indi peqrués.formant et de type professionnel. - Construction- Accessories robuste. forOffe allr tthreading en différ entswork, f oeconomical,rmats comme efficient indiq andués. professional type. - Robust construction. Available in different sizes as indicated.

Support à filière ‘Économique’ SuppoSupporrtt àà filièfilièrree ‘Économi‘Économiqquuee’’ Suppo'Economic'rt à filiè diere ‘Économisupport que’

TTypeype 728 728 ‘ ‘SuppoSupportr tà à filiè filièrere’’ TypeType 728 728 ‘ Suppo ‘Die rsupport’t à filière’ TypeType 728 728 CodeCode ÀÀ t trTraaypevversers 728 les les plats plats ‘Suppo r t T Tàype ypefiliè d’emballa d’emballare’ gege TypeType 728 728 Code À travers les plats Type d’emballage - Conçu- Conçu pour pour contenir contenir soit soit 1’’ 1’’ - filiè - filière rrondee ronde ou houex hagonale.exagonale. 50377Part50377 1’’ 1’’ Through r rondond ou ou h htheexagonalexagonal dishes Type CaofCa rpackagingdérdé - Conçu- pourDesigned contenir to hold soitT eitherype 1’’ - 1filiè728 '' - rrounde ronde or ouhex h die.exagonale. 50377Code 1’’ Àrond tr aouv ershexagonal les plats Type Cad’emballardé ge 1 '' round or hexagonal Carded - Conçu pour contenir soit 1’’ - filière ronde ou hexagonale. 50377 1’’ rond ou hexagonal Cardé

Support à filière Suppo Suppo Die rrsupporttt àà filièfilièrree ‘Qualité professionnelle’ ‘Quali‘Quali ‘Professional Suppottéé pprrorotff essionnellessionnellà filièquality’re ee’’ ‘Qualité professionnelle’

Type 729 Type 729 ‘Die support’ TypeType 729 729 TTypeype 729 729 ‘ ‘SuppoSupportr tà à filiè filièrere’’ - The numbers 50387Type and 729 50390 have adjustable Type 729 ‘Support à filière’ self-centering - Les - Les numé guidesnuméTrypeos withr os50387 503877293 teeth et 50390toet ensure50390 straight Part ThroughType 729the dishes‘Suppo r t à filiè Typere of’ packaging threading ont- Lesont desand numédes guideseasy guides rstarting.os r é50387g rlableség lables e tà 50390 au à tauo-to- 50390CodeCode 1-1 À À / t 2tr ''ra aRoundvversers &les les 1-7 plats /plats 16 '' hex. T Typeype d’emballa d’emballa------gege ont - Lesdes numéguidesr osré g50387lables eàt au50390to- Code À travers les plats Type d’emballage - The cent number centragrea g à50400e 3 à mo 3 moisrdants a rheavy-dutydants pour pour assu die-cast assurerrer hexagon 504005039050390 1-1/2’’ 1-1/2’’ 1-7 R Rond /ond 8 '' & hexagonal& 1-7/16’’ 1-7/16’’ h hex.ex. ------holder un cent un fil with reontfilatage gechrome-plated tdese aà gd 3er oitguidesmodroit ertdants une rt é unsteeldémag lablespour déma handles.r rassu aàgr rauea rfgtacile.ero-e facile. 50390Code1-1/2’’ 1À '' R roundtondrav &ersand 1-7/16’’ hexagonal les plats hex. Type------d’emballaCarded ge 503875040050400 1-7/8’’ 1-7/8’’ h hexagonaleexagonale ------un - Le centfil- Le enumétra agnumégee dàrr ooit3 r 50400moo e 50400t rundants edémast epourunst r unsuppora assug suppoe facile.rrter rt 50400 1-7/8’’ hexagonale ------503875038750390 1’’ 1’’1-1/2’’ R Rondond Re etond th hexagonalee &xagonale 1-7/16’’ hex. CaCardérdé à- unfiliè Leà filièfil numéret arhege exhr agonaleedoxr oit50400agonale et unr obue sdémartobu unste supposrmouléetera gmouléee rftacile. 50387 1’’ Rond et hexagonale Ca------rdé 50400 1-7/8’’ hexagonale aà v filièeca- vLe ecdesr e numédes hpoignéesex poignéesagonalero 50400 en r enobuacier e sacierts teun c hmoulée suppo rcomé.hromé.rt 50387 1’’ Rond et hexagonale Cardé a v àec filiè desre poignées hexagonale en acierrobus cteh rmouléeomé. avec des poignées en acier chromé.

JaugNetes àgauges filet JauJauggeses àà filfileett Jauges à filet

Type 730 ‘Net gauges’ Type 730 TTypeype 730 730 ‘ Jau‘Jauggeses à à fil filete’t’ TypeType 730 730 Type 730 ‘Jauges à filet’ - Made with flat netType shapes 730 on the top of each blade. Part For sizesType ‘Tap 730’ ‘ Jau g esType à fil ofe packagingt’ - F-ab Fab-r iGivesqruéiqué a vthe ecav measure ecdes des foT rf mesonoyper mesAmerican de 730defile filt platV-netset plat sur and sur le also dessusle dessus available - deF abde c har icforqhaquéue metricq uealame.vec lame. nets.des formes de filet plat sur le dessus 50417CodeCode P Pourour les les12 -t 40taillesailles U.S. ‘ T‘Taaraudraud’ ’ T TypeypeCarded d’emballa d’emballagege Code Pour les tailles ‘Taraud’ Type d’emballage de-- Donne Fcabharqiueq uéla lame. amesuvec desre sur for mesles fil dee tsfil enet platV amé surr leicains dessus et 50427 50417 Metric 12 0.512 - -40 1.7540 U U .S.mm,.S. Carded - Donne la mesure sur les filets en V américains et 50417 CaCardérdé - Donne de cha laq uemesu lame.re sur les filets en V américains et 50417Code Mét P #Mét our r r i q27i q12ue les ueand -0.5 0.540 t# ailles -28 U-1.75 .S.1.75 mm, ‘mm,Taraud’ Type Cad’emballardé ge aussi aussi disponible disponible pour pour les les fil efiltse métts métriques.riques. 5042750427 Métrique 0.5 - 1.75 mm, CaCardérdé aussi- Donne disponible la mesu pourre sur les les fil filetsets mét en rViq ues.américains et 5042750417 # # 27 27 12 e te - t#28 40#28 U.S. CaCardérdé Mét #r 27ique et 0.5#28 - 1.75 mm, aussi disponible pour les filets métriques. 50427 Cardé # 27 et #28

36212121 21 Tap support and reamer

- Accessories for all threading work, economical and professional type. - Robust construction. - Treated, heated and hardened tap holder for long life. - Available in all formats as indicated.

Tap support and reamer ‘Professional quality’

Type 725 - Tapping screw support made of hardened steel. Adjustable easily by the handles.

Part For sizes ‘Tap’ Type of packaging 50350 1/4-3/4 (3/8 NPT) ------50360 1/2-1-1/8 (3/4 NPT) ------50347 4-1/2 Carded

Tap support and reamer ‘Economic’

Type 726 - For taps up to 1/2 - Chrome finish, handles with anti-slip grip with black center.

Part For sizes ‘Tap’ Type of packaging 50337 Up to 1/2 Carded

T-handle with ratchet, Tap support

Type 727R - Three-position box for fast and efficient ratchet action. - Designed for use with taps, reamers, screw extractors and other tools with a square shaft. - Chromed for long life and rust resistant. Part For sizes ‘Tap’ Type of packaging 50190 0 - 1/4’’ (3mm - 6mm) ------50200 1/4 - 1/2’’ (6mm - 12mm) ------

T-handle tap support Type 727 - Sliding T-handle with spring tension to hold taps in place, self-leveling tap holder. - Number 50320, has removable handle and 3/8 '' female square drive for extensions, a ratchet and a power control.

Part For sizes ‘Tap’ Type of packaging 50307 0-1/4 Carded 50310 3/16-1/2 ------50320 3/16-1/2 ------

37 Weldout drill bit for automotive welding point - Super cobalt

Type 492-D & 493-D Weldout drill bit for welding point. Super cobalt (HSS), ultra robust This rugged high-performance drills bits is designed to effectively cut body spotwelds. The high hardness of cobalt steel allows speeds 30% higher than those of HSS drills bits. Cobalt steel is significantly more resistant to abrasion, which results in very long cutting edges. The pointed tip on the 492-D type is designed to cut the weld on a panel while leaving the second panel without holes. The modified point on the drill bit type 493-D is chip resistant with slightly greater penetration in the second panel.

Type 492-D

Part Diameter ‘mm’ Size ‘spotweld’ (Inches) Total length Length of the dishes 66420 6.5 mm 1/4 1.56 .44 37240 6.5 mm 1/4 1.49 .44 37520 6.5 mm 1/4 1.75 any 37660 6.5 mm TE* 1/4 3.62 any 66430 8.0 mm 5/16 1.56 .44 37250 8.0 mm 5/16 1.49 .44 37510 8.0 mm 5/16 1.69 .75 37470 8.0 mm 5/16 1.75 any 37670 8.0 mm TE* 5/16 3.62 any 37530 10.0 mm 3/8 1.75 any 37680 10.0 mm TE* 3/8 3.62 any

Type 492-D - Set (WO-6)

Part Description and sizes 6.5mm, 8.0mm & 10.0mm single end 35010 drills bits 1.75 '' length 6.5mm, 8.0mm & 10.0mm two end drills bits 3.62’’ length

Type 493-D

Part Diameter ‘mm’ Size ‘spotweld’ (Inches) Total length Length of the dishes 66180 8.0mm 5/16 2.25 any 66190 10.0mm 3/8 2.25 any 37671 8.0mm TE* 5/16 3.62 any 37681 10.0mm TE* 3/8 3.62 any

Type 493-D - Set (WO-4)

Part Description and sizes 35050 8.0mm & 10.0mm single end Two end drill bits 8.0mm & 10.0mm length

* These two-ended drills cut twice as many welds with the added benefit of a longer reach for drilling less accessible weld points. There are many point drilling systems used.

Some have a significant amount of adjustment for the length of the drill bit. If you have a system that will not work using one of the specified lengths, special lengths can be made to meet your needs.

The three sizes without dishes are for standard air drills. This makes freehand point drilling available to all Bodybuilder. 38 Hole Cutters 3-Flats Shank for Keyless Hole cutters carbide Chucks Split point 135° Type CHC-UB, Type CHD-UB, Type CHC-QR Ejector spring and pilot drill Hole cutters carbide ultra-bor Super Premium Ultra hard 3-Flats with socket for keyless chucks. Produces overlaps and interrupted holes carbide tungsten easily. Cutting 3 times faster than that bimetallic saws hole cutters. teeth

Type CHC-UB Hole cutters Cut up to 3/16 '' Thin materials Diameter Diameter Diameter Diameter Diameter Diameter Part (Inches) ‘Shank’ Qty / pkg Part (Inches) ‘Shank’ Qty / pkg Part (Inches) ‘Shank’ Qty / pkg 62000 9/16 3/8’’ 1 62170 1-5/8 3/8’’ 1 62340 2-11/16 1/2’’ 1 62010 5/8 3/8’’ 1 62180 1-11/16 3/8’’ 1 62350 2-3/4 1/2’’ 1 62020 11/16 3/8’’ 1 62190 1-3/4 3/8’’ 1 62360 2-13/16 1/2’’ 1 62030 3/4 3/8’’ 1 62200 1-13/16 3/8’’ 1 62370 2-7/8 1/2’’ 1 62040 13/16 3/8’’ 1 62210 1-7/8 3/8’’ 1 62380 2-15/16 1/2’’ 1 62050 7/8 3/8’’ 1 62220 1-15/16 3/8’’ 1 62390 3’’ 1/2’’ 1 62060 15/16 3/8’’ 1 62230 2’’ 3/8’’ 1 62400 3-1/4 1/2’’ 1 62070 1’’ 3/8’’ 1 62240 2-1/16 3/8’’ 1 62410 3-1/2 1/2’’ 1 62080 1-1/16 3/8’’ 1 62250 2-1/8 3/8’’ 1 62420 3-3/4 1/2’’ 1 62090 1-1/8 3/8’’ 1 62260 2-3/16 3/8’’ 1 62430 4’’ 1/2’’ 1 62100 1-3/16 3/8’’ 1 62270 2-1/4 3/8’’ 1 62440 4-1/4 1/2’’ 1 62110 1-1/4 3/8’’ 1 62280 2-5/16 3/8’’ 1 62450 4-1/2 1/2’’ 1 62120 1-5/16 3/8’’ 1 62290 2-3/8 3/8’’ 1 62460 4-3/4 1/2’’ 1 62130 1-3/8 3/8’’ 1 62300 2-7/16 3/8’’ 1 62470 5’’ 1/2’’ 1 62140 1-7/16 3/8’’ 1 62310 2-1/2 3/8’’ 1 62480 Pilot drill 1 62150 1-1/2 3/8’’ 1 62320 2-9/16 3/8’’ 1 62490 Screw 1 62160 1-9/16 3/8’’ 1 62330 2-5/8 3/8’’ 1 62500 Spring 1

Hole cutters carbide Hole cutters carbide - Extension Type CHD-UB Includes 'Allen Key' (for Hole cutters CHC-UB and CHD-UB only..) Ejector spring and pilot drill 3-Flats Shank for Keyless Total Length Split point 135° Chucks Part Bore / Shank Diameter Length ‘Extension’ 62710 3/8 7/8 6-1/4’’ 5 inches 62720 1/2 7/8 6-1/4’’ 5 inches

Type CHD-UB Hole cutters Cut up to 1’’ Thick materials Diameter Diameter Diameter Diameter Diameter Diameter Part (Inches) ‘Shank’ Qty / pkg Part (Inches) ‘Shank’ Qty / pkg Part (Inches) ‘Shank’ Qty / pkg 63990 9/16 3/8’’ 1 64160 1-5/8 3/8’’ 1 64370 2-11/16 1/2’’ 1 64000 5/8 3/8’’ 1 64170 1-11/16 3/8’’ 1 64380 2-3/4 1/2’’ 1 64010 11/16 3/8’’ 1 64180 1-3/4 3/8’’ 1 64390 2-13/16 1/2’’ 1 64020 3/4 3/8’’ 1 64190 1-13/16 3/8’’ 1 64400 2-7/8 1/2’’ 1 64030 13/16 3/8’’ 1 64200 1-7/8 3/8’’ 1 64410 2-15/16 1/2’’ 1 64040 7/8 3/8’’ 1 64210 1-15/16 3/8’’ 1 64420 3’’ 1/2’’ 1 64050 15/16 3/8’’ 1 64220 2’’ 3/8’’ 1 64430 3-1/4 1/2’’ 1 64060 1’’ 3/8’’ 1 64240 2-1/16 3/8’’ 1 64440 3-1/2 1/2’’ 1 64070 1-1/16 3/8’’ 1 64250 2-1/8 3/8’’ 1 64450 3-3/4 1/2’’ 1 64080 1-1/8 3/8’’ 1 64260 2-3/16 3/8’’ 1 64460 4’’ 1/2’’ 1 64090 1-3/16 3/8’’ 1 64270 2-1/4 3/8’’ 1 64470 4-1/4 1/2’’ 1 64100 1-1/4 3/8’’ 1 64280 2-5/16 3/8’’ 1 64480 4-1/2 1/2’’ 1 64110 1-5/16 3/8’’ 1 64290 2-3/8 3/8’’ 1 64490 4-3/4 1/2’’ 1 64120 1-3/8 3/8’’ 1 64330 2-7/16 3/8’’ 1 64231 Pilot drill 1 64130 1-7/16 3/8’’ 1 64340 2-1/2 3/8’’ 1 62490 Screw 1 64140 1-1/2 3/8’’ 1 64350 2-9/16 3/8’’ 1 62530 Spring 1 64150 1-9/16 3/8’’ 1 64360 2-5/8 3/8’’ 1 39 Hole cutters Type CHC-UB

Set of hole cutters carbide ‘3pcs’ Ideal for stainless steel, studs and electrical boxes. Can be used on cast iron, copper, aluminum and other non-ferrous thin metals. Holes without burrs.

For the material, until 3/16’’.

Steel Size Stainless steel 11/16’’ x 13/16’’ 700-1000 rpm 300-700 rpm 7/8’’ x 1-3/16’’ 500-800 rpm 200-450 rpm 1-1/4’’ x 1-9/16’’ 300-600 rpm 175-315 rpm 1-5/8’’ x 2’’ 200-500 rpm 120-225 rpm 2-1/16’’ x 2-3/8’’ 200-400 rpm 95-195 rpm 2-7/16’’ x 3’’ 150-300 rpm 80-150 rpm

Set - Contains 1 each 62590 3pcs 7/8’’, 1-1/8’’ et 1-3/8’’ All sets are packaged in a rugged case! Set of Hole cutters carbide Type CHC-UB & CHD-UB

Type CHC-UB Cut up to 3/16’’ Thin materials HC-4B ...... Part: 62600 The set contains: 1 each: Fractional sizes: 11/16, 13/16, 15/16 &1-1/16’’ HC-4A ...... Part: 62610 The set contains: 1 each: Fractional sizes: 5/8, 3/4, 7/8 & 1’’ HC-5C ...... Part: 62620 The set contains: 1 each: Fractional sizes: 7/8, 1-1/8’’, 1-3/8, 1-3/4, 2’’ CHC-UB Individual sizes available 9/16 to 5 inches Type CHD-UB Cut up to 1’’ Thick materials HCD-4B ...... Part: 64300 The set contains: 1 each: Fractional sizes: 11/16, 13/16, 15/16 &1-1/16’’ HCD-4A ...... Part: 64310 The set contains: 1 each: Fractional sizes: 5/8, 3/4, 7/8 & 1’’ HCD-5C ...... Part: 64320 The set contains: 1 each: Fractional sizes: 7/8, 1-1/8’’, 1-3/8, 1-3/4, 2’’ HCD-5C1 ...... Part: 64321 The set contains: 5 pcs: Fractional sizes: 1’’, 1-1/4, 1-1/2, 1-3/4 & 2’’ HCD-5PL ...... Part: 64520 The set contains: 1 each: Fractional sizes: 5/8’’, 3/4’’, 7/8’’, 1’’ & 1-1/8’’ CHD-UB Individual sizes available 5/8 '' to 2 inches 40 Carbide drill bit, Straight flute Hole cutters Type 602-C, Solid carbide

Type CHC-QR Excellent for removing screw extractors, taps and drills. For use in extremely 1/4’’ Quick release hard and difficult to machine materials. Produces precise holes.

Diameter Diameter Part (Inches) ‘Shank’ Qty / pkg Designed for drilling holes in hardened RC-48-65 steel, 83470 5/8 1/4’’ 1 stainless steels and high temperature alloys. 83480 11/16 1/4’’ 1 83490 3/4 1/4’’ 1 83500 13/16 1/4’’ 1 Diameter 83510 7/8 1/4’’ 1 Part (Inches) Total Length 83520 15/16 1/4’’ 1 83530 1’’ 1/4’’ 1 1/4’’ Quick 36173 1/16 1-5/8 83540 1-1/16 1/4’’ 1 Release 36193 3/32 1-3/4 83550 1-1/8 1/4’’ 1 Shank Hex 36213 1/8 1-7/8 83560 1-3/16 1/4’’ 1 36233 5/32 2-1/16 83580 1-1/4 1/4’’ 1 36253 3/16 2-3/16 83590 1-5/16 1/4’’ 1 36273 7/32 2-3/8 83600 1-3/8 1/4’’ 1 36293 1/4 2-1/2 83950 Pilot drill 1 36313 9/32 2-11/16 83960 Screw 1 36333 5/16 2-13/16 83970 Spring 1 36353 11/32 3’’ 36373 3/8 3-1/8 36393 13/32 3-5/16 36413 7/16 3-7/16 36433 15/32 3-5/8 36453 1/2 3-3/4 36473 5/8 4’’ 36483 3/4 4’’

Carbide point drill bit made of hard steel, Straight flute

Type 602, Carbide point Used to drill broken studs, springs, bolts, extra-hard metals and brake drums.

These drills are designed for drilling hardened steel in the range from 48 to 65 Rockwell C.

Diameter Diameter Part (Inches) Total Length Part (Inches) Total Length 32300 1/8 2-3/4 32390 5/16 6’’ 32310 5/32 3’’ 32400 3/8 4’’ 32320 11/64 3’’ 32410 3/8 6’’ 32330 3/16 3’’ 32420 7/16 6’’ 32340 7/32 4’’ 32430 1/2 6’’ 32350 1/4 4’’ 32440 9/16 6’’ 32360 1/4 6’’ 32450 5/8 6’’ 32370 9/32 4’’ 32380 5/16 4’’

41 Carbide drill bits for automotive welding

Type 493-DB Carbide drill bits for welding point Designed for cutting spotwelds of boron steel. Use in high temperature operations and difficult to machine materials. ALTiN coating gives a smooth finish, eliminating the need for lubrication. Recommanded (900 rpm - 1000 rpm)

ALTiN carbide coating gives a smooth finish

Type 493-DB

Part Diameter ‘mm’ Size drill bit ‘Inches’ Total length ‘Inches’ Flat length ‘Inches’ 85890 8.0 5/16 2.00 aucune 85900 10.0 3/8 2.25 aucune

Type 493-DB with flat

Part Diameter ‘mm’ Size drill bit ‘Inches’ Total length ‘Inches’ Flat length ‘Inches’ 85880 8.0 5/16 1.75 .750

Type 493-DN Weldout drill bit for welding point M42 cobalt HSS at robust point M42 cobalt titanium nitride desoldering drills bits are designed for use in high-strength, high-alloy steels commonly used in the automotive industry. The titanium nitride coating doubles tool life, provides additional lubricity and protects drill cut-offs in tough disassembly applications. Titanium nitride drills bits require slower speed (490 rpm) that standard drills bits (1800 rpm) when drilling difficult materials.

Robust ramming point.

Type 493-DN TiN Golden

Part Diameter ‘mm’ Size drill bit ‘Inches’ Total length ‘Inches’ Flat length ‘Inches’ 73450 8.0 5/16 2.25 any 73460 10.0 3/8 2.25 any 73470 8.0 TE* 5/16 3.62 any 73480 10.0 TE* 3/8 3.62 any

42 Premium carbide burrs

Double cut

The most popular burr for ferrous applications.

The flutes are ground both in the left and right directions, providing better operator control and quick removal of material from the hardest materials.

Double cut geometry reduces chip size and can be used at slower than normal speeds.

Aluma cut

Designed for use on aluminum, non-ferrous metals, mild steel, reinforced plastics and other soft materials.

The burrs are designed with a high flute finish for easy Materials Aluma cut Double cut chip flow and quick material removal and excellent Steel workpiece finish. Brass

Bronze

Copper

Melting

Plastics

Steel (40-50 RC)

Steel (55-60 RC)

Steel (Carbide)

Steel (Nickel chrome)

Stainless steel

Steel welds

Titanium

Zinc

Recommanded (RPM)

Diameter Standard materials Stainless steel Diameter Standard materials Stainless steel 1/16 72500 97500 3/32 65500 89000 3/8 25000 25000 1/8 56000 76000 7/16 22000 22000 5/32 46000 70000 1/2 18800 18800 3/16 40000 65500 5/8 17000 17000 1/4 35000 61000 3/4 14900 14900 5/16 28000 28000 1’’ 12600 12600

43 SA Cylinder shape - SB Cylinder shape - No end cut With end cut

Application: Peripheral milling Application: Deburring and face milling

Double cut

Aluma cut Double cut

SA - Cylinder shape - No end cut - Double cut SB - Cylinder shape - With end cut - Double cut

Diameter Length Diameter Diameter Length Diameter Part Size cutting cutting ‘Shank’ Qty Part Size cutting cutting ‘Shank’ Qty 17079 SA-41 1/16 1/4 1/8 1 17409 SB-41 1/16 1/4 1/8 1 17089 SA-42 3/32 7/16 1/8 1 17419 SB-42 3/32 7/16 1/8 1 17099 SA-43 1/8 9/16 1/8 1 17429 SB-43 1/8 9/16 1/8 1 17109 SA-11 1/8 1/2 1/4 1 17439 SB-11 1/8 1/2 1/4 1 17119 SA-12 1/8 5/8 1/4 1 17449 SB-12 1/8 5/8 1/4 1 17129 SA-52 5/32 1/2 1/8 1 17459 SB-13 5/32 5/8 1/4 1 17139 SA-13 5/32 5/8 1/4 1 17469 SB-14 3/16 5/8 1/4 1 17149 SA-14 3/16 5/8 1/4 1 17479 SB-51 1/4 3/16 1/8 1 17159 SA-51 1/4 1/2 1/8 1 17489 SB-1 1/4 5/8 1/4 1 17169 SA-1 1/4 5/8 1/4 1 17499 SB-1L 1/4 1 1/4 1 17179 SA-1L 1/4 1 1/4 1 17509 SB-2 5/16 3/4 1/4 1 17209 SA-2 5/16 3/4 1/4 1 17519 SB-3 3/8 3/4 1/4 1 17219 SA-3 3/8 3/4 1/4 1 17529 SB-3L 3/8 1 1/4 1 17229 SA-3L 3/8 1 1/4 1 17539 SB-3X 3/8 1-1/2 1/4 1 17249 SA-3X 3/8 1-1/2 1/4 1 17549 SB-4 7/16 1 1/4 1 17269 SA-4 7/16 1 1/4 1 17559 SB-5 1/2 1 1/4 1 17279 SA-5 1/2 1 1/4 1 17569 SB-6 5/8 1 1/4 1 17309 SA-6 5/8 1 1/4 1 17579 SB-15 3/4 1/2 1/4 1 17329 SA-15 3/4 1/2 1/4 1 17589 SB-16 3/4 3/4 1/4 1 17339 SA-16 3/4 3/4 1/4 1 17599 SB-7 3/4 1 1/4 1 17349 SA-7 3/4 1 1/4 1 17619 SB-8 7/8 1 1/4 1 17369 SA-8 7/8 1 1/4 1 17629 SB-9 1 1 1/4 1 17379 SA-9 1 1 1/4 1

SA - Cylinder shape - No end cut - Aluma cut

Diameter Length Diameter Part Size cutting cutting ‘Shank’ Qty 17199 SA-1NF 1/4 5/8 1/4 1 17259 SA-3NF 3/8 3/4 1/4 1 17299 SA-5NF 1/2 1 1/4 1 17319 SA-6NF 5/8 1 1/4 1 17359 SA-7NF 3/4 1 1/4 1

SA - Cylinder shape - No end cut 6 '' extended shank length

Diameter Length Diameter Part Size cutting cutting ‘Shank’ Qty 17189 SA-1L6 1/4 5/8 1/4 1 17239 SA-3L6 3/8 3/4 1/4 1 17289 SA-5L6 1/2 1 1/4 1

44 SC Cylinder shape - SD Ball shape Radius end Application: Contouring, deburring of holes, Application: Surface milling and contouring preparation of welding of setting up

Double cut

Aluma cut

SC - Cylinder shape - Radius end - Double cut SD - Ball shape Diameter Length Diameter Part Size cutting cutting ‘Shank’ Qty Diameter Length Diameter 17659 SC-41 3/32 7/16 1/8 1 Part Size cutting cutting ‘Shank’ Qty 17669 SC-42 1/8 9/16 1/8 1 17979 SD-41 3/32 3/32 1/8 1 17679 SC-11 1/8 1/2 1/4 1 17989 SD-42 1/8 1/8 1/8 1 17689 SC-12 1/8 5/8 1/4 1 18009 SD-11 1/8 1/8 1/4 1 17699 SC-52 5/32 1/2 1/8 1 18019 SD-53 3/16 3/16 1/8 1 17709 SC-13 5/32 5/8 1/4 1 18029 SD-14 3/16 3/16 1/4 1 17719 SC-53 3/16 1/2 1/8 1 18039 SD-51 1/4 1/4 1/8 1 17729 SC-14 3/16 5/8 1/4 1 18049 SD-1 1/4 1/4 1/4 1 17739 SC-51 1/4 1/2 1/8 1 18079 SD-2 5/16 5/16 1/4 1 17749 SC-1 1/4 5/8 1/4 1 18089 SD-3 3/8 3/8 1/4 1 17759 SC-1L 1/4 1 1/4 1 18119 SD-4 7/16 7/16 1/4 1 17789 SC-2 5/16 3/4 1/4 1 18129 SD-5 1/2 1/2 1/4 1 17799 SC-3 3/8 3/4 1/4 1 18159 SD-6 5/8 5/8 1/4 1 17809 SC-3L 3/8 1 1/4 1 18179 SD-7 3/4 3/4 1/4 1 17829 SC-3X 3/8 1-1/2 1/4 1 18199 SD-9 1 1 1/4 1 17849 SC-4 7/16 1 1/4 1 17859 SC-5 1/2 1 1/4 1 17889 SC-6 5/8 1 1/4 1 17909 SC-15 3/4 1/2 1/4 1 17919 SC-16 3/4 3/4 1/4 1 SD - Ball shape -Aluma 17929 SC-7 3/4 1 1/4 1 17949 SC-9 1 1 1/4 1 Diameter Length Diameter Part Size cutting cutting ‘Shank’ Qty 18069 SD-1NF 1/4 1/4 1/4 1 18109 SD-3NF 3/8 3/8 1/4 1 SC - Cylinder shape - Radius end - Aluma cut 18149 SD-5NF 1/2 1/2 1/4 1 18169 SD-6NF 5/8 5/8 1/4 1 18189 SD-7NF 3/4 3/4 1/4 1 Diameter Length Diameter Part Size cutting cutting ‘Shank’ Qty 17779 SC-1NF 1/4 5/8 1/4 1 17839 SC-3NF 3/8 3/4 1/4 1 17879 SC-5NF 1/2 1 1/4 1 17899 SC-6NF 5/8 1 1/4 1 17939 SC-7NF 3/4 1 1/4 1

SD - Ball shape 6 '' extended shank length SC - Cylinder shape - Radius end 6 '' extended shank length Diameter Length Diameter Diameter Length Diameter Part Size cutting cutting ‘Shank’ Qty Part Size cutting cutting ‘Shank’ Qty 18059 SD-1L6 1/4 7/32 1/4 1 18099 SD-3L6 3/8 5/16 1/4 1 17769 SC-1L6 1/4 5/8 1/4 1 18139 SD-5L6 1/2 7/16 1/4 1 17819 SC-3L6 3/8 3/4 1/4 1 17869 SC-5L6 1/2 1 1/4 1

45 SE Oval / Egg shape SF Tree shape radius

Application: Contouring Application: Narrow contours

Double cut Double cut

Aluma cut Aluma cut

SF - Tree shape radius SE - Oval / Egg shape Diameter Length Diameter Diameter Length Diameter Part Size drilling drilling ‘Shank’ Qty 18429 SF-41 1/8 1/4 1/8 1 Part Size drilling drilling ‘Shank’ Qty 18439 SF-42 1/8 1/2 1/8 1 18239 SE-41 1/8 7/32 1/8 1 18449 SF-11 1/8 1/2 1/4 1 18249 SE-53 3/16 9/32 1/8 1 18459 SF-53 3/16 1/2 1/8 1 18259 SE-11 3/16 5/16 1/4 1 18469 SF-51 1/4 1/2 1/8 1 18269 SE-51 1/4 3/8 1/8 1 18479 SF-1 1/4 5/8 1/4 1 18279 SE-1 1/4 3/8 1/4 1 18509 SF-3 3/8 3/4 1/4 1 18299 SE-3 3/8 5/8 1/4 1 18539 SF-4 7/16 1 1/4 1 18329 SE-5 1/2 7/8 1/4 1 18549 SF-13 1/2 3/4 1/4 1 18359 SE-6 5/8 1 1/4 1 18559 SF-5 1/2 1 1/4 1 18379 SE-7 3/4 1 1/4 1 18589 SF-6 5/8 1 1/4 1 18609 SF-7 3/4 1 1/4 1 18629 SF-14 3/4 1-1/4 1/4 1 18649 SF-15 3/4 1-1/2 1/4 1

SE - Oval / Egg shape - Aluma Diameter Length Diameter SF - Tree shape radius -Aluma Part Size drilling drilling ‘Shank’ Qty Diameter Length Diameter 18319 SE-3NF 3/8 5/8 1/4 1 18349 SE-5NF 1/2 7/8 1/4 1 Part Size drilling drilling ‘Shank’ Qty 18369 SE-6NF 5/8 1 1/4 1 18499 SF-1NF 1/4 5/8 1/4 1 18389 SE-7NF 3/4 1 1/4 1 18529 SF-3NF 3/8 3/4 1/4 1 18579 SF-5NF 1/2 1 1/4 1 18599 SF-6NF 5/8 1 1/4 1 18619 SF-7NF 3/4 1 1/4 1 18639 SF-14NF 3/4 1-1/4 1/4 1

SE - Oval / Egg shape 6 '' extended shank length

Diameter Length Diameter SF - Tree shape radius 6’’ extended shank length Part Size drilling drilling ‘Shank’ Qty 18289 SE-1L6 1/4 3/8 1/4 1 Diameter Length Diameter 18309 SE-3L6 3/8 19/32 1/4 1 18339 SE-5L6 5/8 7/8 1/4 1 Part Size drilling drilling ‘Shank’ Qty 18489 SF-1L6 1/4 5/8 1/4 1 18519 SF-3L6 3/8 3/4 1/4 1 18569 SF-5L6 1/2 1 1/4 1

46

Spira-Broach - Annular HSS High speed steel / Types 13SP & 13LSP Spira-Broach - Set of annulars Spira-Broach M2 drills bits

High speed steel cutter Black Our Spira-Broach high economic performance for a wide & Gold These unique features reduce the time and power by making holes variety of applications. of larger diameters in the form of a ring to produce a solid plug.

1 '' depth of cut Spira-Broach - Annular 2’’ depth of cut - Lowest cost of operation per hole - Type 13SP - Type 13LSP - Cutting on curved surfaces - Leave a hole without burr Part Diameter Qty. Part Diameter Qty. - Allows overlapping cuts on existing holes 16311 7/16’’ 1 16312 7/16’’ 1 16321 1/2’’ 1 16322 1/2’’ 1 16331 9/16’’ 1 16332 9/16’’ 1 16341 5/8’’ 1 16342 5/8’’ 1 SB-5 1 '' & 2 '' in length 16351 11/16’’ 1 16352 11/16 1 16361 3/4’’ 1 9/16, 11/16, 13/16, 15/16 & 1-1/16 16362 3/4’’ 1 16371 13/16 1 16372 13/16 1 16381 7/8’’ 1 16382 7/8’’ 1 Part Description 16391 15/16 1 16392 15/16 1 15301 16401 1’’ 1 1 '' of pine 16402 1’’ 1 M42 16411 1-1/16 1 16412 1-1/16 1 16421 1-1/8 1 15302 16422 1-1/8 1 2’’ of pine 16431 1-3/16 1 M42 16432 1-3/16 1 16441 1-1/4 1 16442 1-1/4 1 16901 16451 1-5/16 1 1’’ of pine 16452 1-5/16 1 M35 16461 1-3/8 1 16462 1-3/8 1 16902 16471 1-7/16 1 2’’ of pine 16472 1-7/16 1 M35 16481 1-1/2 1 16482 1-1/2 1 16491 1-9/16 1 16624 16492 1-9/16 1 1’’ of pine 16501 1-5/8 1 M2 HSS 16502 1-5/8 1 16511 1-11/16 1 16512 1-11/16 1 16629 16521 1-3/4 1 2’’ of pine 16522 1-3/4 1 M2 HSS 16531 1-13/16 1 16532 1-13/16 1 16541 1-7/8 1 16542 1-7/8 1 16551 1-15/16 1 16552 1-15/16 1 16561 2’’ 1 16562 2’’ 1 16571 2-1/16 1 16572 2-1/16 1 16581 2-1/8 1 16582 2-1/8 1 16591 2-3/16 1 16592 2-3/16 1 16601 2-1/4 1 16602 2-1/4 1 16611 2-5/16 1 16612 2-5/16 1 16621 2-3/8’’ 1 16622 2-3/8 1

Display of annulairs drills bits Central pine for depth Central pine for depth of cut 1 '' of cut 2’’ Annulars Part Description Size The compact metal case attractively displays the annular ones. Lexan scratch protection reduces pilfering and keeps clean goods. 00902 The pine 1/4 '' PP1 / 4x1 Part Description Size Diameter is suitable 00903 The pine 1/4 '' PP1 / 4x2 1/2’’, 9/16’’, 5/8’’, 11/16’’, 3/4’’, 13/16’’, 7/8’’, 15/16’’, at cuts of 1-1 / 2 '' Diameter is suitable 1’’& 1-1/16’’ of depth of dia. at cuts of 1-1 / 2 '' at 2-3 / 8 ''. & more. Part Description Part Size Qty. 00943 M-42 1 Part Description 13720 The pine 11/64’’ Dia. is 00944 M-35 1 13710 The pine 11/64’’ Dia. is suitable for cuts depth 00949 M-2 HSS 1 suitable for cuts depth from 7 / 16''to 2 ''. of 7/16 '' to 1 ''.

49 Spira-Broach - Annulars - M35 6% Cobalt

Types 14 & 14L / Spira-Broach

Special cobalt cutter - Gold finish M35 cobalt cuts are known for their longevity and ease of penetration into hard materials. The annulars do not cut the materials except at the periphery of the hole, rather than converting the whole hole into chips. As a result, the effort required to drill the hole is less than for a traditional twist drill bit.

1’’ depth of cut - Type 14 2’’ depth of cut - Type 14-L

Part Diameter Qty. Part Diameter Qty. 16631 7/16’’ 1 16632 7/16’’ 1 16641 1/2’’ 1 16642 1/2’’ 1 16651 9/16’’ 1 16652 9/16’’ 1 16661 5/8’’ 1 16662 5/8’’ 1 16671 11/16’’ 1 16672 11/16 1 16681 3/4’’ 1 16682 3/4’’ 1 16691 13/16 1 16692 13/16 1 16701 7/8’’ 1 16702 7/8’’ 1 16711 15/16 1 16712 15/16 1 16721 1’’ 1 16722 1’’ 1 16731 1-1/16 1 16732 1-1/16 1 16741 1-1/8 1 16742 1-1/8 1 16751 1-3/16 1 16752 1-3/16 1 16761 1-1/4 1 16762 1-1/4 1 16771 1-5/16 1 16772 1-5/16 1 16781 1-3/8 1 16782 1-3/8 1 16791 1-7/16 1 16792 1-7/16 1 16801 1-1/2 1 16802 1-1/2 1 16811 1-9/16 1 16812 1-9/16 1 16821 1-5/8 1 16822 1-5/8 1 16831 1-11/16 1 16832 1-11/16 1 16841 1-3/4 1 16842 1-3/4 1 16851 1-13/16 1 16852 1-13/16 1 16861 1-7/8 1 16862 1-7/8 1 16871 1-15/16 1 16872 1-15/16 1 16881 2’’ 1 16882 2’’ 1 16891 2-1/16 1 16892 2-1/16 1

Central pine for depth of cut 1 '' Central pine of depth of cut 2’’

Part Description Size Part Description Size 00902 The pine 1/4 '' PP1 / 4x1 00903 The pine 1/4 '' PP1 / 4x2 Diameter is suitable Diameter is suitable at cuts of 1-1 / 2 '' at cuts of 1-1 / 2 '' of depth of dia. & more. at 2-3 / 8 ''. Part Description Part Description 13720 The pine 11/64’’ Dia. 13710 The pine 11/64’’ Dia. suitable for cuts suitable for cuts depth from 7 / 16''to 2 ''. depth of 7/16 '' to 1 ''.

50 Spira-Broach - Annulars - M42 the strength of cobalt, 8% of Cobalt

Types 15 & 15L / (Spira-Broach)

Ultra high performance, gold finish - Super cobalt steel These unique knives reduce the need for time and energy by making larger diameter holes in the form of a ring to produce a solid stopper. The energy requirements are a fraction of those needed when using a twist drill or an indexable tool. Multiple teeth cut only the outside diameter of the hole and give a super fast bore quality hole. Spira-Broach tools are manufactured using powdered M42 cobalt steel and provide speeds 30 to 40 percent faster than high-speed ring annulars. In many applications, Spira-Broach knives will more than double the tool life between re-sharpening.

1’’ depth of cut - Type 15 2’’ depth of cut - Type 15L

Part Diameter Qty. Part Diameter Qty. 14352 7/16’’ 1 14351 7/16’’ 1 14392 1/2’’ 1 14391 1/2’’ 1 14432 9/16’’ 1 14431 9/16’’ 1 14472 5/8’’ 1 14471 5/8’’ 1 14512 11/16 1 14511 11/16’’ 1 14552 3/4’’ 1 14551 3/4’’ 1 14592 13/16 1 14591 13/16 1 14632 7/8’’ 1 14631 7/8’’ 1 14672 15/16 1 14671 15/16 1 14712 1’’ 1 14711 1’’ 1 14752 1-1/16 1 14751 1-1/16 1 Spira-Broach - Annular 14972 1-1/8 1 14971 1-1/8 1 14832 1-3/16 1 14831 1-3/16 1 - Lowest cost of operation per hole 14872 1-1/4 1 14871 1-1/4 1 - Leave a hole without burr 14912 1-5/16 1 14911 1-5/16 1 - Allows overlapping cuts on existing holes 14952 1-3/8 1 14951 1-3/8 1 - Cutting on curved surfaces 14992 1-7/16 1 14991 1-7/16 1 - Uses less power 15032 1-1/2 1 15031 1-1/2 1 - Lasts much longer 15052 1-9/16 1 15051 1-9/16 1 15072 1-5/8 1 15071 1-5/8 1 All the annulars have 3/4 "of shank 15092 1-11/16 1 15091 1-11/16 1 with 2-Flats of 90 °. 15112 1-3/4 1 15111 1-3/4 1 15132 1-13/16 1 15131 1-13/16 1 15152 1-7/8 1 15151 1-7/8 1 15172 1-15/16 1 15171 1-15/16 1 15192 2’’ 1 15191 2’’ 1 15212 2-1/16 1 15211 2-1/16 1 15232 2-1/8 1 15231 2-1/8 1 15252 2-3/16 1 15251 2-3/16 1 15272 2-1/4 1 15271 2-1/4 1 15282 2-5/16 1 15281 2-5/16 1 15292 2-3/8 1 15291 2-3/8 1

Central Pine for depth of cut 2 '' Central Pine for depth of cut 1 '' Part Description Size Part Description Size 00903 The pine 1/4 '' PP1 / 4x2 00902 PP1 / 4x1 The pine 1/4 '' Diameter is suitable Diameter is suitable at cuts of 1-1 / 2 '' at cuts of 1-1 / 2 '' & more. of depth of dia. at 2-3 / 8 ''. Part Description Part Description 13720 The pine 11/64’’ dia. 13710 The pine 11/64’’ Dia. suitable for cuts suitable for cuts depth from 7 / 16''to 2 ''. depth of 7/16 '' to 1 ''.

51 Magnetic-based drills

Height: 7-3 / 4 " TM Spira-Broach Magnetic-based drills Drill control panel MBD 4500 Spira-BroachTM MBD 4500 magnetic drill

Features: - Quick release chuck - Low height for confined spaces - LED light for better vision in dark areas - Accepts 3/4 '' standard shank annular drills - Detachable handle can be used on either side - Cutting capacity 1- 3/8 ” - Power 1.5 - Load RPM 390 - Weight 25 pounds Detachable handle can be used on either side. - Magnetic force: 3300 lbs

# Part Description / Size Qty. 12400 MBD 4500 1

Spira-BroachTM Magnetic-based drills MBD 40

The Spira-BroachTM MBD 40 is a lightweight magnetic drill yet powerful with the ability to cut large diameter holes up to 1-1 / 2 ”.

Features: - Cutting capacity 1-1 / 2 " - Automatic coolant - Clutch and overload protection - 1/2 ”Twist Drill Capacity - Carrying case, drill chuck and accessories included - Magnetic adhesion: 1650 lbs.

Technical specifications: - Speed RPM 350 Load - Speed RPM 610 no load - Weight - only 32.2 lbs - Maximum cutting capacity: 1/2 ”diameter x 2” deep - Motor Specifications: 110V full load 11A 1100W 230V full load 5A 1100W

# Part Description / Size Qty. 12420 MBD 40 1

52 Magnetic-based drills

MBD 6500 - Heavy-Duty Spira-BroachTM Magnetic variable speed drill MBD 6500.

Features: - Two speed ranges - Convenient carrying case - Morse Taper enables rapid conversion to spiral drilling

Technical specifications: - Power 1.5hp - Cutting capacity 2 " - Morse Taper -2 - Speed ranges - 280/500 RPM - Magnet Adhesion - 2000 lbs. - Weight - 40 lbs Comprend également: - Integrated lubrication system - Warranty - Allenv keys - Safety strap and guard

MBD 7000 - Robust with reverse gear Spira-BroachTM MBD 7000 Variable Speed Magnetic Drill

Fonctionnalités: - Reversible motor for tapping - Variable speed control - Morse Taper allows fast conversion to helical drilling - Two speed ranges - Convenient carrying case - 2 inch cutting capacity

# Part Description / Size Qty. 17920 MBD 6500 1 17930 MBD 7000 1 00952 Chuck with Morse Taper n ° 2 1

53 Feed and drilling speeds

Different drilling conditions, make it impossible to develop strict rules for feeding and speeds. The following tables contain guidelines that can be used when drilling standard materials. Also, the following “rules of thumb” can be used to determine the appropriate feeds and speeds for drilling ferrous materials (note: varying conditions can easily require adjustment):

- Feed equals 0.001 "per turn for every 1/16" of drill diameter, plus or minus 0.001 "of the total. - The speed equals 90 surface feet per minute in a 100 Brinell hardness material and the speed should be reduced by 10 surface feet per minute for each additional 50 points of Brinell hardness. - Feed and speeds rates, should be reduced by up to 45-50% when drilling holes larger than 4 drill diameters.

Drill diameter Feed in inches (Inches) per revolution Less than 1/8 .001 to .003 1/8 to 1/4 .002 to .006 1/4 to 1/2 .004 to .010 1/2 to 1 inche .007 to .015 1 inch and more .015 to .025

Recommended feeding of drills of different diameters

Note: It is best to start with moderate speed and feed by increasing one or both, after observing the action and condition of the bit.

Recommended speed Materiel (SFM) Aluminum and its alloys 200-300 Brass and bronze (ordinary) 150-300 Bronze (high resistance) 70-150 Die casting (zinc base) 300-400 Iron - Cast (soft) 75-125 Cast (medium hard) 50-100 Hard refrigerated 10-20 Malleable 80-90 Magnesium and its alloys 250-400 Monel metal or high nickel steel 30-50 Plastics or similar materials 100-300 Steel 80-110 Soft carbon .2 to .3 carbon 70-80 .4 carbon to .5 carbon steel 50-60 Tool 1.2 carbon 40-50 Alloy Forgings - 300 to 400 Brinell 20-30 High resistance (heat treated)

54 www.prototal.ca

Phone: (819) 314-6640 [email protected] Fax: (819) 730-0107 Version 2021