GROUP 597 Hardpoint Jack Xpert Hand Coarse Hardened and tempered blade. Designed to cut chipboard, 10505542 blockboard, timber, , , plasterboard and laminates. A coarse tooth handsaw suited for laminated boards, plasterboard and Specially hardened teeth to stay sharp longer. Tough handle with fast ripping cuts. 1mm thick rigid nose blade is designed to offer fingerline for comfort and accuracy. 8TPI. maximum blade stability and features triple ground teeth 8TPI for ultimate cutting performance. The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use. Suitable for cutting , , rough timber, board sheet, plasterboard and worktop. Blade Teeth Order Code List Offer Blade Teeth Order Code List Offer Length per inch SSF-597 Price/1 Price/1 Length per inch IRW-565 Price/1 Price/1 560mm (22”) 8 -4780K £7.98 £5.27 560mm (22”) 8 -4120B £17.08 £12.81 PrizeCut Hardpoint Jack Xpert Universal Hand Saw Universal Handsaw 10505540 PrizeCut professional handsaw for cutting all types of . A universal handsaw offering all round cutting performance. 1mm Universal toothing with hardpoint teeth for long lasting sharpness. thick rigid nose blade is designed to offer maximum blade stability Screwed one-piece plastic handle. and features triple ground teeth 8TPI for ultimate cutting 7/8TPI. performance. Suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, floorboard and melamine.

Blade Teeth Order Code List Offer Blade Teeth Order Code List Offer Length per inch BAH-597 Price/1 Price/1 Length per inch IRW-565 Price/1 Price/1 550mm (22”) 7/8 -7922Z £12.18 £10.35 510mm (20”) 8 -4100A £14.94 £11.21 Hand Jack Xpert Fine Hand Saw No.244. ground teeth for superior cutting efficiency. Hardpoint 10505556 all purpose teeth for cutting with and across grain. Blue plastic Ideally suited for cutting hardwood, and for accurate finishing cuts. handle that will measure 45° and 90° angles. 1mm thick rigid nose blade is designed to offer maximum blade No.244P. For medium to thick wood materials. Hardpoint, stability and features triple ground teeth 10TPI for ultimate cutting universal bevel ground teeth for cutting along, performance. Soft grip handle with finger guide for maximum comfort as well as across, the grain. during prolonged use. Suitable for cutting hardwood, Plastic handle. 8TPI. softwood, board sheet, worktop, , skirting board, architrave, floorboard and melamine.

Product Blade Weight Order Code List Offer Number Length each BAH-597 Price/1 Price/1 500mm (20”) 400g -2097F £16.06 £13.65 Blade Teeth Order Code List Offer 244 560mm (22”) 425g -2101B £16.71 £14.20 Length per inch IRW-565 Price/1 Price/1 244P 560mm (22”) 475g -2105F £17.37 £14.76 510mm (20”) 10 -4160D £14.94 £11.21 Box Hand Saw FatMax® Fine toothed hand saw to give a smooth cut in a wide variety of wood Heavy Duty Saw based materials, aluminium, plastics and laminates. The FatMax® heavy-duty saw has a bi-material handle screwed and Fitted with a plastic handle which is strong ultrasonically welded for comfort and security. The teeth are precision and comfortable in use. set to generate clearance of kerf for the blade to cut on both the Size: 14” x 16TPI. forward and back stroke increasing cutting efficiency by 30% and have three sided precision ground teeth which offer razor sharp cutting edges at every stage of the stroke. Induction hardened teeth stay sharper twice as long.

Blade Teeth Order Code List Offer Product Blade Teeth Order Code List Offer Length per inch BAH-597 Price/1 Price/1 Number Length Per Inch STN-585 Price/1 Price/1 350mm (14”) 16 -2130F £15.73 £13.37 5-15-289 560mm (22”) 7 -3090T £17.14 £12.51 PC-20-LAM Laminator Saw FatMax® Fine Finish Saw Specially designed for cutting laminated and wooden flooring. The Bi-material handle screwed and ultrasonically welded for comfort and high quality steel blade is taller and thicker than conventional blades security. Teeth are precision set to generate clearance of kerf for the and has fine XT hardpoint toothing, allowing a faster and straighter blade to cut on both the forward and back stroke increasing cutting cut. Fitted with a comfortable handle. efficiency by 30%. Three sided precision ground teeth offer razor sharp HAND TOOLS Size: 20” x 11TPI/12PPI. cutting edges at every stage of the stroke. Induction hardened teeth stay sharper twice as long. Length: 22”/550mm x 11TPI.

Blade Teeth Order Code List Offer Product Blade Teeth Order Code List Offer Length per inch BAH-597 Price/1 Price/1 Number Length Per Inch STN-585 Price/1 Price/1 500mm (20”) 11 -8020A £20.69 £17.59 5-15-244 550mm (22”) 11 -3046A £17.14 £12.51

Page 1210 GROUP WOODWORKING TOOLS 597 Jack Hardpoint Meteor Hand Saws Hand Saw 10505212 (20”) 550mm (22") hand saw with a high quality hardened and tempered steel blade with specially 10505211 (22”) hardened teeth. Stays sharp longer. Fitted with a bi-material handle with 10505213 (22”) fingerline for comfort and accuracy. Three ground edges per tooth. Cuts Triple ground hardpoint saw for up to 25% on back stroke. Designed to cut chipboard, blockboard, faster cuts. High quality C75 steel blade. timber, plywood, hardboard, plasterboard, Water based lacquer treated blade providing PVC and laminates. four times the added protection than conventional anti-rust agents. Ergonomically designed soft-grip handle.

EXTENDED 8 points per inch (7tpi) Blade Teeth Weight Order Code List Offer RANGE Length Per Inch each KEN-597 Price/1 Price/1 550mm (22”) 7 540g -4900K £17.14 £11.31 550mm (22”) 11 540g -4920K £17.14 £11.31 Professional Hand Saw Superior quality skew back. Hardened and ground Blade Teeth Order Code List Offer steel with glazed and polished blade, Length per inch IRW-565 Price/1 Price/1 tensioned and fully sprung. 500mm (20”) 8 -3722C £12.45 £9.34 Teeth are set and 550mm (22”) 7 -3721A £12.75 £9.56 sharpened. 550mm (22”) 8 -3723D £12.75 £9.56 Polished handle with Jack Hardpoint Fine Hand Saw brass screws. Blade Teeth Order Code List Offer 10505215 Supplied in wallet with tooth guard. Length per inch KEN-597 Price/1 Price/1 High quality steel blade with razor sharp 10 points per inch. 560mm (22”) 9 -4700K £37.62 £24.83 double-ground, hardpoint teeth that cut in both the push and pull stroke. Water based lacquer gives four times better rust protection Xpert Universal on blade than traditional lacquers. Woodsaw Ergonomically designed soft-grip handle. 10503533 - XP3049-325 Supergrip dual material handle for superb 10 points per inch. Shallow bladed round nose saw for cross comfort grip. Precision cross ground teeth for cutting, mitre work, PVC, veneer, mouldings, the sharpest cut. Handy 45°/90° angles sheet laminates and any detail work. With a guide built into handle. soft touch handle giving a positive durable grip. Hardpoint blade. 13 points per inch.

Blade Teeth Order Code List Offer Blade Teeth Order Code List Offer Blade Teeth Order Code List Offer Length per inch IRW-565 Price/1 Price/1 Length per inch IRW-565 Price/1 Price/1 Length per inch S&J-596 Price/1 Price/1 550mm (22”) 9 -3725F £12.75 £9.56 325mm (13”) 12 -2110F £8.58 £6.44 500mm (20”) 8 -2569Q £16.84 £12.12 Evo 530mm (21”) Hardpoint Xpert PTFE Coated Handsaw Jack Hardpoint Hand Saw Hand Saw 10505545 10503632 The triple ground tooth configuration will cut 1mm rigid nose blade. Low friction PTFE High quality steel blade with razor sharp on pull stroke as well as push stroke, a truly coating. Screwed handle/blade assembly. double-ground, hardpoint teeth that cut in universal and the improved balance enables Triple ground teeth. Soft grip handle with both the push and pull stroke. Water-based quicker cutting with less effort. Comfort grip finger guide. 3 cutting faces for maximum lacquer gives four times better rust protection handle and finger rest for maximum comfort performance. Cuts on the push and pull on blade than traditional lacquers. and control. This product has been developed stroke. Ideal for and board Ergonomically designed soft-grip handle. materials. entirely through end user research. NEW

Blade Teeth Order Code List Offer Blade Teeth Order Code List Offer Blade Teeth Order Code List Offer Length per inch IRW-565 Price/1 Price/1 Length per inch IRW-565 Price/1 Price/1 Length per inch IRW-565 Price/1 Price/1 530mm (21”) 9 -6858N £15.39 £11.54 500mm (20”) 8 -4132E £17.38 £13.04 335mm (13”) 12 -3729K £10.35 £7.76

Folding Saw Horse - TOOLS HAND Twin Pack The Kennedy Saw Horse is designed for supporting wooden planks and boards and is recommended for use in pairs. It has spreader bars for extra stability and features a support bar on the top with metric and inch scale and end stops to secure the workpiece in place. Folds flat for easy transportation and storage. NEW Non slip rubber inserts, prevent work piece slipping Folds flat for easy transportation and storage Spreader Bars Securing End Stops Suitable for on site and workshop use Rated to 100kg per pair Dimensions (open) Dimensions (closed) Max Load Order Code List Offer Metric and inch scale on the top L x W x H (cm) L x W x H (cm) per pair KEN-597 Price/1 Price/1 Waterproof 52 x 61 x 79.5 5.5 x 61 x 82.5 100kg -8140K £31.20 £20.59

Page 1211 GROUP 597 WOODWORKING TOOLS Masonry Saws Hardened and tempered steel blade Beechwood Sawing Blocks with carbide teeth. and block pre-cut at 45° and 90°. Heavy Duty Heavy Duty Suitable for Mitre Box cutting man made building blocks and bricks with 35 tungsten carbide teeth. Medium Duty Medium Duty Suitable for cement based building blocks, Type Blade Teeth Weight Order Code List Offer Internal Size Order Code List Offer 17 tungsten carbide Length per inch each KEN-597 Price/1 Price/1 (mm) KEN-597 Price/1 Price/1 tips on alternate Medium 622mm 17 1.10kg -5720K £52.74 £34.81 230 x 76 -6090K £14.00 £9.24 teeth. Heavy 490mm 35 1.20kg -5740K £74.51 £49.18 Mitre Block Saw Hardpoint Saw For cutting and shaping in wood. Flexible spring blade. Set and sharpened Steel frame and teeth. High impact moulded plastic handle. comfortable For cutting apertures and curves in a wide wooden handle. range of materials. Supplied with 150mm (6”) blade. Internal Size Order Code List Offer (mm) KEN-597 Price/1 Price/1 Can also be used as a 230 x 76 -6190K £5.56 £3.67 pruning saw. Overall Weight Order Code List Offer Length each KEN-538 Price/1 Price/1 290mm 200g -2100K £14.27 £8.85 Manufactured from the quality wood. Hooks into the edge of the bench allowing Blade Teeth Order Code List Offer Spare Blades (to suit above): Length per inch SSF-597 Price/1 Price/1 Teeth Pack Order Code List Offer the workpiece to be held firmly against one per inch Quantity KEN-040 Price/1 Price/1 end whilst cutting or . 300mm (12”) 8 -5340K £4.36 £2.88 14 10 -1020K £3.96 £2.06 Universal - left and right handed. Pad Fret Saw Saw Heavy-duty foam grip for maximum comfort. Fret saw for fine cutting Accepts 1/2" deep hacksaw blades. Suitable for use in areas of awkward access. work in thin materials such as wood, bone, plastics, etc - ideal for Internal Size Order Code List Offer model makers. (mm) KEN-597 Price/1 Price/1 Length: 130mm (5”). Height: 460mm (183/8”). 230 x 150 -6290K £12.17 £8.03 150mm (6”) BLADE Mitre Saw Block Overall Weight Order Code List Offer The easy to use solution for precise mitre Length each KEN-538 Price/1 Price/1 cuts. Patented storage system for storing ° ° 210mm (81/4”) 130g -1000K £6.20 £3.84 Product Length Order Code List Offer saw. 90 and 45 mitre slots as well as Number (mm) ECL-553 Price/1 Price/1 22.5° for octagonal shapes. 70-FS1R 460 -0742B £18.38 £13.42 Manufactured from Pad Saw lightweight high For use in confined spaces. Spare Blades (to suit above): impact ABS Order Code Offer Product TPI List plastic. Number ECL-040 Price/100 Price/100 Length: FS22 22 -0960K £35.85 £22.23 300mm. FS18 18 -0970K £35.85 £22.23 FS16 16 -0980K £38.88 £24.11 General-Purpose Saw Blade Weight Order Code List Offer 72-66XR Length each KEN-597 Price/1 Price/1 Overall Order Code List Offer Nine-position handle enables the blade to be Length STN-585 Price/1 Price/1 230mm (9”) 140g -5270K £11.73 £7.74 fixed at different angles making the saw 300mm -3514W £5.87 £4.29 Spare Blade -5280K £2.66 £1.76 easier to use in awkward cutting positions. Plasterboard Saw Dry Wall Suitable for rapidly cutting holes in Saw plasterboard. Hardened and tempered carbon M/TRW426 steel blade with polished handle Blade Weight Order Code List Offer Rock warrior saw blade manufactured from and brass ferrule. 7TPI. Length each ECL-553 Price/1 Price/1 tempered, high carbon steel with bevel point HAND TOOLS 465mm (18”) 450g -0780B £19.93 £14.55 and comfort grip. The blade cuts on the push stroke as well as the pull stroke. Spare Blades (to suit above): Easily penetrates 73-66SR - 10TPI for general work. dry walls. 73-77SR - 7TPI for for wood.

Blade Weight Order Code List Offer Product Weight Order Code List Offer Blade Order Code List Offer Length each KEN-597 Price/1 Price/1 Number each ECL-553 Price/1 Price/1 Length MTN-512 Price/1 Price/1 150mm (6”) 105g -5660K £11.74 £7.75 73-66SR 190g -0790K £11.80 £8.61 150mm (6”) -6926R £10.75 £8.17

Page 1212 GROUP WOODWORKING TOOLS 597 Flexi Flush Reversible Gent’s Saw Steel Back Gent’s Saws Cutting Saw Suitable for flush cutting in the most Suitable for precise flush cutting. Suitable for precise cutting in confined areas awkward corners on the left or right hand Sprung alloy steel blade with rigid or around obstructions. Flexible alloy steel side. Reversible offset alloy steel blade steel back, polished rosewood handle and blade, which cuts on the pull stroke. cranked and polished with rigid back. brass ferrule. Polished rosewood handle with brass ferrule. Rosewood handle with brass ferrule. 15TPI. Blade width: 60mm (21/4”). 20TPI.

Blade Weight Order Code List Offer Length each KEN-597 Price/1 Price/1 Blade Weight Order Code List Offer 155mm (6”) 120g -5520K £11.21 £7.40 Length each KEN-597 Price/1 Price/1 100mm (4”) 160g -5440K £11.24 £7.42 Blade Weight Order Code List Offer 150mm (6”) 180g -5460K £14.62 £9.65 Mini Gent’s Saws Length each KEN-597 Price/1 Price/1 200mm (8”) 200g -5480K £15.18 £10.02 Suitable for light duty precise cutting. Narrow 250mm (10”) 305g -5400K £23.06 £15.22 blade width allows use in confined areas. Brass Back Dovetail Saw Polished rosewood handle with brass ferrule. Hardpoint Tenon Saw Alloy steel blade, tensioned with hardened Blade width: 40mm (11/2”). Has file sharpened teeth with plain hardened and ground teeth. Heavy rigid brass back and cutting edges. Impact resistant handle. High polished rosewood handle. Securely fastened quality. with two brass screws. 13 points per inch. 20TPI.

Blade Weight Order Code List Offer Length each KEN-597 Price/1 Price/1 100mm (4”) 120g -5540K £14.01 £9.25 150mm (6”) 160g -5560K £14.99 £9.89 Corner

Clamps Blade Weight Order Code List Offer Blade Weight Order Code List Offer Heavy-duty accurate mitre . Length Per 10 KEN-597 Price/1 Price/1 Length Per 10 KEN-597 Price/1 Price/1 Solid grey cast iron body with 250mm (10”) 3.8kg -4620K £11.77 £7.77 200mm (8”) 500g -5420K £45.10 £29.77 precision machined clamping surfaces. Pre-drilled holes enable the clamp to be Professional Tenon Saw fixed to a Manufactured from hardened and ground block of wood steel with glazed and polished blade, or bench. Hardpoint Veneer Saw tensioned and fully sprung. Curved end allows cutting up to skirts and Highly polished brass back and handle. corners. Set and sharpened teeth. High Product Capacity Order Code List Offer Supplied in wallet with tooth guard. Number MAR-597 Price/1 Price/1 impact moulded plastic handle. Hardened 15 points per inch. M140 50mm -3024H £15.53 £12.42 and tempered spring steel blade. M141 110mm -3024N £55.00 £44.00 14TPI. 15 points per inch. Saw Tooth Setter For setting teeth on the majority of wood saws from 4 to 12TPI. Blade Weight Order Code List Offer Length Per 10 KEN-597 Price/1 Price/1 250mm (10”) 6.0kg -4600K £47.22 £31.17 Blade Teeth Order Code List Offer Length per inch SSF-597 Price/1 Price/1 FatMax® Back 330mm (13”) 14 -5620K £8.00 £5.28 Product Length Weight Order Code List Offer Saw/Tenon Saw Number (mm) each ECL-553 Price/1 Price/1 Reinforced back for extra rigidity makes a 94-370Y 180 350g -0814G £25.67 £18.74 Jet Cut straighter cut. Handle screwed to blade for Tenon Saw extra strength. Finger rest - ergonomic Corner Impact resistant ABS handle, securely fixed design, useful for extra control when starting TOOLS HAND to the blade with two brass screws. a cut. Triple edged teeth cut on both push Clamp and pull strokes for ease of cutting. Induction Sprung steel blade with rigid steel back for ° ° Ideal for use with wood, angle and tubing. precise control. hardened teeth. 45 and 90 angle quick Clamping jaws swivel to accept various 11TPI. reference points. Bi-material handle for widths. Die cast aluminium body with improved grip and comfort. bench mounting. Size: 12in/300mm. 11TPI. Base : 158 x 158mm. Jaw depth: 36mm. Slot width: 10mm.

Maximum Weight Order Code List Offer Product Length Weight Order Code List Offer Blade Teeth Order Code List Offer Clamping each KEN-597 Price/1 Price/1 Number (mm) each STN-585 Price/1 Price/1 Length per inch STN-585 Price/1 Price/1 70 x 70mm 1.40kg -6000K £20.39 £13.46 1-15-216 300 435g -2946B £33.34 £24.34 300mm (12”) 11 -3502R £9.95 £7.26

Page 1213 GROUP 597 WOODWORKING TOOLS Using Your Maintaining Your Plane  Use machine oil to keep the  Always hold the plane firmly to  A plane is a precision tool, surface of the stone wet but ensure optimum balance and therefore it should always be remove excess before use. control. Ensure the workpiece is treated with care. Always store This is to prevent dust and secure and stand behind the the plane on its side — this will metal particles from clogging plane - never pull a plane towards avoid unnecessary damage to the stone. your body. the blade.  Remove any burrs by laying the  When end-grain, plywood,  Always sharpen the blade front of the blade flat on the blockboard or difficult/curly grain, before use. This will make it oilstone and work it in a the direction of the cut is easier, and safer to use and “figure-eight” motion. extremely important. A 'slice' produce a superior surface  Painted surfaces should be action is advised or splitting may finish. occur. This is achieved this by sanded or stripped back before  holding the plane at an angle as Before sharpening the blade planing in order to avoid shown. take the blade out of the plane clogging of the blade and  and remove the cap iron. damage to the timber. Splitting can generally be Always lay the blade cap iron prevented in several ways:  flat on a firm surface before Never plane over nails, this will damage the blade. 1) By planing towards the centre of taking out the screw. the workpiece   Sharpen your blade using an Always wipe the blade with a 2) Bevel the corner of the workpiece oilstone. Best results are cloth before replacing it. before planing achieved by using a honing  Candle wax applied to the sole 3) Clamp scrap wood level with the guide - this will give the ideal of the plane may reduce edge of the surface being planed angle at the cutting edge of the friction, especially on freshly and plane it straight across. blade. cut timber. Block Plane No. 4 No. 200 Used for general purpose smoothing and final finishing. Suitable for any single handed operation in particular for end-grain Featuring a robust level cap designed to lock down on three points work. The low angle plane cutter ensures minimal vibration giving an for secure location of the cutting iron. High excellent finish on many man made materials such as plastic performance carbon steel blade, hardened and laminates. Adjustable 40mm width steel tampered to retain a keen cutting edge to cut cutting blade with ground base and even the hardest of . Impact resistant sides for smooth planing. ABS resin handle and knob are extremely Large screw for accurate robust and contoured to fit comfortably in adjustments. the hand, for maximum control and reduced user fatigue. Suitable for single and two handed operations. Traditional adjusting nut for fine setting.

Cast iron body with adjustable cutter depth and alignment. Model Length Iron Weight Order Code List Offer Model Length Iron Weight Order Code List Offer Number (mm) Width each SEN-597 Price/1 Price/1 Number (mm) Width each SEN-597 Price/1 Price/1 200 178 41mm 0.80kg -0990K £33.73 £22.26 4 247 51mm 1.93kg -0940K £37.56 £24.79 No. 5 Fully adjustable metal plane for stock removal and truing up long edges or levelling wide boards. Kidney shaped lever cap screw hole prevents accidental slippage of cutter. High performance carbon steel blade. hardened and tampered to retain a keen cutting edge. Fully adjustable frog for all tasks and timber types. Virtually unbreakable polypropylene handle and knob shaped for comfort. Finger tip adjustment for depth of cut and cutter alignment. Tight fitting spring steel cap iron for optimum shaving flow. Cast fine grey iron base for stability and wear resistance. Precision ground base and sides ensure performance to the highest tolerances. HAND TOOLS

Model Length Iron Weight Order Code List Offer Number (mm) Width each SEN-597 Price/1 Price/1 5 355 51mm 3.2kg -0920K £45.03 £29.72

Page 1214 GROUP WOODWORKING TOOLS 597 Block Planes Suitable for end grain work or any application where single handed operation is required. The plane bodies are manufactured from fine grey iron ground and polished to a high quality finish. The cutter is set at a low angle to ensures vibration is kept to a minimum, producing good results when used on plastic laminates and other man made materials. All have adjustable cutter alignment and depth of cut. 41/2” 51/2” Block Plane 7” Block Plane Small professional plane made from close Small block plane suitable mainly for model For general purpose grained fine grey iron. Fully adjustable for makers 25° cutter angle. applications. 40mm depth of cut, cutter alignment and mouth 35mm cutter width. cutter width. opening. For end grain and general purpose fine finishing work. Comes with pouch for convenient storage. 40mm blade width.

Product Model Weight Order Code List Offer Number Number each STN-585 Price/1 Price/1 1-12-116 110 755g -2816M £28.65 £20.91 Replacement Block Plane Irons Iron Product Order Code Offer Product Model Weight Order Code List Offer Product Model Weight Order Code List Offer Width Number STN-567 Price/1 Number Number each STN-585 Price/1 Price/1 Number Number each STN-585 Price/1 Price/1 35mm 1-12-504 -1504V £7.96 5-12-020 114 1kg -2721C £55.59 £40.58 1-12-102 102 435g -2802F £18.82 £13.74 40mm 1-12-508 -1508W £7.96 Economy Bench Bench Plane Planes SP4 No. 4 Bailey Used for smoothing and final finishing. Featuring a robust level cap The bases of the planes are manufactured from cast designed to lock down on three points for secure location of the fine grey iron. The unmachined parts are coated cutting iron. Razor sharp tungsten vanadium steel cutting iron to cut with a durable, high quality epoxy coating. even the hardest of woods. Impact resistant ABS High carbon steel polished and precision resin handle and knob for comfort and control. ground blade, brass adjusting Traditional adjusting nut for fine seating. nut and contoured handle. Length: 245mm. For general purpose Blade width: 50mm. applications and fine finishing of high quality work.

Product Model Length Iron Weight Order Code List Offer Number Number (mm) Width each STN-585 Price/1 Price/1 1-12-004 4 245 50 1.9kg -2704C £57.36 £41.87 1-12-045 41/2 260 60 2.6kg -2745K £64.10 £46.79 Replacement Smoothing Plane Irons (not illustrated). Product Width Order Code Offer Number (mm) STN-567 Price/1 0-12-313 50 -1313H £10.40 0-12-315 60 -1315K £11.81 Jack Plane Model Length Iron Weight Order Code List Offer For rapidly removing stock, to prepare Number (mm) Width each REC-565 Price/1 Price/1 the rough timber before construction. SP4 245 50mm 2.0kg -8060H £38.87 £27.21 Smoothing Plane No. 4 Used for smoothing and final finishing. Blade width 50mm. Featuring a robust level cap designed to lock down on three points for secure location of the cutting iron. Razor sharp tungsten vanadium steel Product Model Length Iron Weight Order Code List Offer cutting iron to cut even the hardest of woods and is precision Number Number (mm) Width each STN-585 Price/1 Price/1 machined to lay flat on the frog face and eliminate 1-12-005 5 355 50mm 2.3kg -2705E £68.29 £49.85 chatter. Impact resistant ABS resin handle and knob for comfort and control. Traditional adjusting nut for fine seating. The cast iron fine grained body and frog are CNC No. 6 TOOLS HAND machined to 0.04mm accuracy with a Fully adjustable for stock removal and truing up long edges or precision machine-filed mouth. levelling wide boards. Carbon hardened and tempered steel cutter with a keen cutting edge. Fully adjustable frog for all tasks and timber types. Polypropylene handle. Finger tip adjustment for depth of cut and cutter alignment. Tight fitting spring steel cap iron.

Precision ground base and sides ensure performance to the highest tolerances. Model Length Iron Weight Order Code List Offer Product Model Length Iron Weight Order Code List Offer Number (mm) Width each REC-565 Price/1 Price/1 Number Number (mm) Width each STN-585 Price/1 Price/1 04 245 50mm 1.7kg -8004D £68.54 £47.98 1-12-006 6 460 60mm 2.3kg -2706G £104.49 £76.28

Page 1215 GROUP 597 WOODWORKING TOOLS Hand Heavy-Duty Breast Hand Drill Heavy-duty two speed breast drill with a Drill Double pinion drill with die heavy cast construction and enclosed Supplied with cast body and three jaw gearing. Fitted with a three jaw keyless 8mm, three jaw keyless chuck. Plastic 10mm chuck and supplied with two chuck. Handles handle with plastic grips removable wooden handles. The plate is are moulded from and screw top, for bit pressed against the chest to force the drill the same tough storage. Used for small point into the work. polypropylene as Extra operations. used for Grip handles. Precision die cast aluminium Double gear wheel and Pinion twin pinions. Strong die cast aluminium body with black epoxy coating.

Double Folds Pinion flat for storage

8mm 8mm Chuck Group 10mm Chuck 279 Chuck Overall Weight Order Code List Offer Overall Weight Order Code List Offer Product Length Order Code List Offer Length per 6 KEN-597 Price/1 Price/1 Length each KEN-597 Price/1 Price/1 Number (mm) STN-585 Price/1 Price/1 215mm 2.80kg -0600K £17.90 £11.81 330mm 1.10kg -0640K £54.26 £35.81 1-03-103 315 -2183A £36.26 £26.47

Rebate Bull Nose Plane Manufactured from fine black cast iron. All Duplex 78 working surfaces are accurately ground and Base manufactured from fine grey iron accurately polished. Allows rebates to trim right to the ground and polished. The cutter has two positions, edge. Lightweight, ideal for central for normal work and front for bull trimming rebates. nose work. The depth of cut Blade width: is adjustable in the 29mm. central cutter position. Supplied complete with cutting spur for cross grain work, adjustable and depth . Blade cutter width: 38mm (11/2”).

Product Model Weight Order Code List Offer Product Model Weight Order Code List Offer Number Number each STN-585 Price/1 Price/1 Number Number each STN-585 Price/1 Price/1 1-12-078 78 1.6kg -2778L £67.14 £49.01 1-12-075 75 305g -2775J £24.87 £18.16

Shoulder Rebate Plane Fine grey iron precision ground and polished for flatness Manufactured from grey iron casting finished with a hard wearing and squareness. Fine adjustment for precise durable epoxy lacquer coating. With fully adjustable cutter alignment control, for fine or coarse work. and depth of cut. Suitable for rapid stock removal. Front of plane can be removed to allow the plane to be used as a chisel plane for working into

HAND TOOLS stopped rebates.

Product Blade Order Code List Offer Product Blade Weight Order Code List Offer Number (mm) STN-585 Price/1 Price/1 Number (mm) each STN-585 Price/1 Price/1 1-12-151 Flat -2851R £20.68 £15.10 1-12-090 25 115g -2790T £99.53 £72.66 1-12-152 Round -2852T £20.68 £15.10

Page 1216 GROUP WOODWORKING TOOLS 597 Surface Cabinet Scraper Set Forming Tools For fine surface finishing of intricate With tough enamelled alloy bodies and high carbon heat treated steel blades. contour surfaces. Used to manually remove small amounts of material and excels Flat File - Straight Handle For straight filing Block Plane For single handed use, in tricky grain areas where hand planes would with flat blade as standard. Plastic handle. giving compactness and precision filing. cause tear out. They will stand up to any Blade length: 255mm. Blade length: 140mm. heavy-duty scraping task with minimum tear Blade width: 40mm. Blade width: 40mm. out. For best results, these scrapers should Overall length: 395mm. Overall length: 140mm. be burnished to a razor sharp edge. 3 PIECES

Plane For conventional plane type filing. With flat blade as standard. Black plastic handle. Blade length: 255mm. Shaver Tool With plastic holder. Blade width: 40mm. Blade length: 63mm. Overall length: 285mm. Blade width: 40mm. Overall length: 185mm.

Round File - Straight For convex and concave surface shaping. Wooden handle. Blade length: 255mm. Blade width: 16mm. Overall length: 360mm. Number Weight Order Code List Offer of Pieces Set KEN-597 Price/1 Price/1 3 170g -7400K £9.34 £5.23 Cabinet Scrapers Tool Blade Blade Overall Weight Order Code List Offer Style Length Width Length each KEN-597 Price/1 Price/1 Used for removing fine shavings from wood Flat File 255mm 40mm 395mm 400g -1010K £13.56 £8.95 surfaces, leaving a very smooth finish. Plane 255mm 40mm 285mm 400g -1070K £14.89 £9.83 Manufactured from hardened, tempered and Block Plane 140mm 40mm 140mm 130g -1110K £9.57 £6.32 polished carbon steel. Shaver Tool 63mm 40mm 185mm 60g -1150K £3.06 £2.02 Round File 255mm 16mm 360mm 125g -1240K £9.84 £6.49 Replacement Blades To Blade Weight Order Code List Offer Suit Type each KEN-597 Price/1 Price/1 Flat File or Flat 40g -2020K £3.30 £2.18 Plane Half-Round 40g -2040K £3.87 £2.55 Block Plane Flat 30g -2060K £2.67 £1.76 Model Weight Order Code List Offer Shaver Tool Curved 10g -2080K £1.68 £1.11 Number Size each MAR-597 Price/1 Price/1 Round File Round 40g -2100K £5.16 £3.41 M2450 5” x 21/2” 50g -3550K £3.64 £2.91 M2451 6” x 3” 80g -3551M £3.98 £3.18 Angle Finder - Magnetic Base Can be used independently as a ‘quick check’ tool or to convert a rule or into a Digital precision angle finder. High strength built-in ceramic magnet with vee for use on bars Protractors and pipes. Accuracy: ±0.5%. Easy-to-use, strong lock device with magnets For the most accurate readings it is on all blade edges, a hold function, reversible reading and a large LCD display. recommended that the angle finder is °. attached to a steel rule or square by means Accuracy: ±0.1 of the magnet or screws. HAND TOOLS HAND

High strength built-in ceramic magnet plus vee groove for use on bars and pipes. Product Size Order Code List Offer Number (mm) M&W-340 Price/1 Price/1 MW505-01 100 -3651A £66.00 £59.40 MW505-02 200 -3652B £73.50 £66.15 Dial Order Code List Offer Reading KEN-597 Price/1 Price/1 MW505-03 200 -3653C £82.50 £74.25 MW506-01 200 -3661A £33.00 £29.70 0-90° (Any Quadrant) -7500K £7.56 £4.99 MW506-02 300 -3662B £36.00 £32.40

Page 1217 GROUP 597 WOODWORKING TOOLS Bevel Edge Bevel Edge Wood Wood Chisel Set Craftsman M373 Hammer-blow resistant handles. For craftsmen and . Designed to give a life-time of Hardened and tempered one-piece steel high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. blade, used for chamfering, dovetailing and ‘CAB’ (Cellulose Acetate Butyrate handles). making clean cuts in tight corners. With ‘split-proof’ handles which are 6 designed to absorb hammer blows PIECES and hard demanding woodwork.

Blade Width Weight Order Code List Offer mm Inch per 12 KEN-597 Price/1 Price/1 6 1/4” 1.90kg -2800K £18.81 £12.41 10 3/8” 2.20kg -2820K £19.54 £12.90 13 1/2” 2.35kg -2840K £19.65 £12.97 16 5/8” 2.50kg -2860K £20.82 £13.74 19 3/4” 2.60kg -2880K £21.27 £14.04 25 1” 3.00kg -2900K £22.56 £14.89 38 11/2” 3.85kg -2940K £34.74 £22.93 Set No. of Weight Order Code List Offer PiecesContents each KEN-597 Price/1 Price/1 6, 13, 19, 4 880g -2980K £73.95 £41.41 & 25mm Professional ‘Classic’ pattern. For professional carpenters.

Blade Width Weight Order Code List Offer No. of Contents Weight Order Code List Offer mm Inch per 12 KEN-597 Price/1 Price/1 Pieces (mm) each MAR-597 Price/1 Price/1 1/ 6, 10, 13 6 4” 1.90kg -2160K £13.12 £8.66 6 1.9kg -3121M £122.64 £98.11 10 3/8” 2.10kg -2240K £13.12 £8.66 19, 25 & 32 13 1/2” 2.20kg -2320K £13.85 £9.14 16 5/8” 2.40kg -2400K £14.57 £9.62 MS500 Bevel Edge Chisels 19 3/4” 2.50kg -2480K £15.44 £10.19 25 1” 2.80kg -2640K £16.95 £11.19 5 Piece Wallet Set 38 11/2” 3.70kg -2680K £21.90 £14.45 Oil and water resistant soft touch handles to Set prevent slippage and to give improved No. of Weight Order Code List Offer comfort even during prolonged use. It also PiecesContents each KEN-597 Price/1 Price/1 reduces vibrations and reduces hand fatigue. 6, 13, 19, Single piece blade forging gives added 4 800g -2970K £58.40 £32.70 & 25mm strength and durability and has a metal striking cap allows use with a hammer, prolongs the life of the handle and ’s prevents mushrooming. Chisel Set 5 Contents: 1/4”, 3/8”, 1/2”, 3/4”, PIECES Made from quality materials and complete with its own canvas storage wallet. Bevel and 1”. edged chrome vanadium blades, hardened, tempered, ground and polished.

Comfortable bi-material handles with impact resistant end caps. Contents: 6mm (1/4”), 13mm (1/2”), 19mm (3/4”) and 25mm (1”) chisels.

4 PIECES HAND TOOLS

Number Contents Order Code List Offer Number Order Code List Offer of Pieces (inch) MAR-597 Price/1 Price/1 of Pieces SEN-597 Price/1 Price/1 1/4”, 3/8”, 1/2” 5 -3210A £51.14 £40.91 4 -2970K £25.75 £17.00 3/4” & 1”

Page 1218 GROUP WOODWORKING TOOLS 597 Chisel Turning Tool Set Sets Tool Set Contents: four straight gouges, two Specially designed 2-component handle Contents: three straight gouges, two skew square chisels, two skew chisels, two maximises control and comfort. Precison chisels, one V-parting tool, one round nose V-parting tools, one veiner and one spoon bit. ground blades, honed, hardened and and one diamond point. HSS steel blades. Alloy steel blades. All supplied in a quality tempered. With tip protectors. In exclusive All supplied in a wooden presentation case. wooden presentation case. wooden box. Blade length: 125mm. Blade length: 110mm. Handle length: 95mm. 6 Piece Set: 424P-S6-EUR: Handle length: 250mm. 8 12 6, 10, 12, 18, 25 and 32mm. PIECES PIECES 8 Piece Set: 424P-S8-EUR: 6, 10, 12, 18, 25 and 32mm.

NEW

Number Order Code List Offer of Pieces BAH-597 Price/1 Price/1 6 -2460Z £73.89 £62.81 8 -2461F £94.94 £80.70 Number Weight Order Code List Offer Number Weight Order Code List Offer Honing of Pieces each SEN-597 Price/1 Price/1 of Pieces each SEN-597 Price/1 Price/1 Guide 8 2.25kg -3940K £57.50 £37.95 12 1.30kg -3960K £30.70 £20.26 For holding wood chisels and plane blades whilst sharpening. Beechwood & Traditional carpenter’s pattern. Pin Driver For pushing home nails and pins where a hammer cannot be used. Magnetic head holds nail in place and the spring return allows automatic thrusting of nail. Pistol grip handle.

Model Weight Order Code List Offer Product Weight Order Code List Offer Number each S&J-596 Price/1 Price/1 Number each ECL-553 Price/1 Price/1 9180 2.5 (3/32”) -2537M £6.65 £4.79 94-360R 625g -0810C £16.71 £12.20 Head Weight Order Code List Offer Size each KEN-597 Price/1 Price/1 114mm (41/2”) 520g -6450K £10.94 £7.22 Adjustable Marketry Punch Tank Cutter Beechwood handle, for piercing holes in Adjustable Hole Cutter 68C veneer and thin wood. High carbon steel drill with adjustable For use on metal, wood, steel cutter. plastics, laminates and 8mm hexagon shank leather etc. Cutting suitable for use in drill diameter can be infinitely chucks. The cutting TOOLS HAND varied within range. blade length is easily Graduated scale with adjusted using a locking screw. For use in screwdriver. three jaw chucks Length x Weight Order Code List Offer (6.4mm shank). Diameter each KEN-597 Price/1 Price/1 65 x 3mm 25g -7250K £3.47 £2.29 Tacklifter Beechwood handle, V-cut. Maximum cutting thickness: metal 2mm, wood 8mm. Suitable for cutting Overall length: 95mm. holes in sheets of Cutting range: 20 - 76mm. unhardened material up to 2mm thick. Weight Order Code List Offer Weight Order Code List Offer Capacity Weight Order Code List Offer Length each KEN-597 Price/1 Price/1 per 6 KEN-597 Price/1 Price/1 (mm) each MON-588 Price/1 Price/1 195mm 100g -7150K £5.50 £3.63 950g -4520K £28.62 £18.89 34 - 125 132g -0068C £17.05 £15.35

Page 1219 GROUP 597 WOODWORKING TOOLS Auger Blue Groove Bits Power Drill Bits American pattern with solid single twist. Spur point and hexagon For drilling into nail embedded shank for use with hand and power tools. wood - The IRWIN Blue Groove POWER. 50x more durable than standard flat bits in nail emended wood. 6x faster than standard flat bits. Cutting Dia. Overall Weight Order Code List Offer 10507720 (mm) (Inch) Length (mm) each KEN-597 Price/1 Price/1 3 Piece Set Contents: 6mm Hexagon Shank 14, 16 and 18mm bits. 6 1/4” 230 60g -3030K £11.41 £7.53 10507764 7mm Hexagon Shank 3 Piece Set Contents: 9 3/8” 230 40g -3070K £11.41 £7.53 20, 22 and 25mm bits. 13 1/2” 230 130g -3110K £11.41 £7.53 16 5/8” 230 110g -3150K £13.48 £8.90 8mm Hexagon Shank 19 3/4” 230 240g -3190K £17.48 £11.54 9mm Hexagon Shank 3 22 7/8” 230 300g -3230K £19.62 £12.95 PIECES 25 1” 230 260g -3280K £21.47 £14.17 Boxed Set Set contents: 6, 9, 13, 16, 19, 22 and 25mm. 7 Product Number Order Code List Offer PIECES Number of Pieces IRW-565 Price/1 Price/1 10507720 3 -6720X £40.98 £30.74 10507764 3 -6764V £45.38 £34.04 Forstner Bits For precision hole boring. Self piloting point combined with trepanning style cutting action will produce overlapping holes in any direction. Ideal for scroll and scalloping applications. Suitable for use in bench and pillar to bore a wide range of timber, plastics and other materials.

Diameter Overall Weight Order Code List Offer (mm) Length (mm) each SEN-597 Price/1 Price/1 10 90 45g -5100K £3.44 £2.27 Number Weight Order Code List Offer 12 90 45g -5120K £3.78 £2.49 of Pieces each KEN-597 Price/1 Price/1 15 90 60g -5150K £4.08 £2.69 16 90 65g -5160K £4.14 £2.73 7 860g -3300K £65.95 £36.93 18 90 65g -5180K £4.34 £2.86 20 90 70g -5200K £4.56 £3.01 22 90 70g -5220K £4.78 £3.15 Blue Groove 25 90 90g -5250K £5.05 £3.33 Auger Bit Sets 26 90 90g -5260K £5.27 £3.48 Tri-flute design for faster chip ejection. Full screw tip for ease of use 28 90 95g -5280K £5.33 £3.52 30 90 105g -5300K £5.68 £3.75 and pull through. Cutting spurs clean holes with minimal ‘break out’. 35 90 120g -5350K £6.03 £3.98 Less binding and ease of use with tapered flute. Full length heat 40 90 165g -5400K £6.66 £4.40 treatment for extra durability. 45 90 180g -5450K £8.83 £5.83 10506628 50 90 200g -5500K £9.82 £6.48 6 Piece Set Contents: 16, 18, 20, 22, 25 and 32mm bits. Boxed Sets Contents: 5 5 Piece: 1x each 15, 20, 25, 30 and 35mm. PIECES 15 Piece: 1x each 10, 12, 15, 16, 18, 20, 25, 26, 28, 30, 35, 40, 45 and 50mm. 15 PIECES

6 PIECES HAND TOOLS

Number Weight Order Code List Offer Product Number Order Code List Offer of Pieces each SEN-597 Price/1 Price/1 Number of Pieces IRW-565 Price/1 Price/1 5 0.70g -5650K £26.70 £17.62 10506628 6 -5908J £46.25 £34.69 15 2.30g -5670K £70.80 £46.73

Page 1220 GROUP WOODWORKING TOOLS 597 162 Piece Flat Power Bit Set Bits Thes Senator® multi-purpose power tool bit set contains a truly Forged from high quality tool steel with chip clearance groove and comprehensive range of the most commonly used screwdriver bits, hollow ground point. Centerless ground and true running. Ground nut spinners, Torx bits, drills and adaptors that are suitable for use spade bit head. For cutting holes in laminates and wood. 6mm with hand and power tools. They are supplied in a moulded plastic hexagon shank to prevent slipping at speed. carry case that has individually storage slots for each piece to ensure you can locate the bit you require easily. Overall dimensions (W x H x D): 455 x 178 x 297mm. Set includes: Cutting Dia. Overall Weight Order Code List Offer 32x 25mm (1”) driver bits consisting of: slotted, crosspoint, square, mm inch Length each KEN-597 Price/1 Price/1 pozi and torx. 9 3/8” 160 50g -4070K £3.73 £2.46 24x 50mm (2”) screwdriver bits consisting of: slotted, crosspoint and 13 1/2” 160 50g -4110K £3.92 £2.59 torx. 16 5/8” 165 55g -4150K £4.18 £2.76 18x nut driver bits. 19 3/4” 170 55g -4190K £4.37 £2.88 5x300mm (12") extra length 22 7/8” 170 60g -4230K £4.50 £2.97 25 1” 170 60g -4280K £4.57 £3.02 masonry drills. 1/ 11x standard length masonry 32 1 4” 170 60g -4290K £5.65 £3.73 drills. 1x screw finder. Flat Bit Set 9x flat wood bits. Supplied in wallet. 17x woodworking drills. Contents: 5x holesaw with . 9 (3/8”), 13 (1/2”), 1x ruler. 16(5/8”), 19 (3/4”), 1x centre punch. 22 (7/8”) and 1x ratcheting bit 25mm (1”). driver. 4x drill bit depth stop. 1x . 1x carpenter’s pencil. 162 6 PIECES PIECES

Number Weight Order Code List Offer of Pieces each KEN-597 Price/1 Price/1 6 280g -4300K £22.65 £12.68 Adjustable Flat Bits For cutting holes in wood, plastics etc. Cutting diameter can be infinitely varied within range. Graduated scale with locking screw. Number Weight Order Code List Offer For use in three jaw chucks. 9.6mm hexagon shank. of Pieces each SEN-595 Price/1 Price/1 162 3.4kg -3180K £50.88 £27.98 Blue Groove 8 Flat Bit Set PIECES 8 Piece Set The innovative Blue Groove 4X flat bit is designed to improve Overall length: 170mm. productivity Cutting Weight Order Code List Offer and accuracy. Range Per 12 KEN-597 Price/1 Price/1 Its patented 25 - 45mm 1.8g -4400K £36.93 £24.37 groove point 40 - 76mm 2.8g -4450K £42.59 £28.11 and cutting edge enable it to cut Sidewinder through wood Drill TOOLS HAND quickly and Titanium nitride (TiN) coated for increased tool life and performance. smoothly without scraping, whilst the parabolic Standard 118° drill point. scoop 6mm shank diameter optimises control and suitable for use in electric removal and air powered drills. of wood The side cutting teeth allow chips. the drill to be used for producing any size or shape Overall of hole in wood or plastic. length: 157mm. Product Number Contents Order Code List Offer Diameter Overall Weight Order Code List Offer Number of Pieces (mm) IRW-565 Price/1 Price/1 (mm) Length each SEN-597 Price/1 Price/1 12, 16, 18, 20 6 90mm 150g -7500K £4.02 £2.65 10506629 8 22, 25, 28 and 32 -5909K £36.32 £27.24 8 97mm 150g -7550K £4.02 £2.65

Page 1221 GROUP 597 WOODWORKING TOOLS Marking & Mortice Chalk Gauge Lines Marking & Aluminium Alloy Case M2049 With foldaway locking handle. Heavy-duty Mortice Standard timber robust design, complete with universal hook. Gauges marking gauge, Beechwood manufactured from Marking plantation grown Gauge rosewood, and For marking featuring Chalk not wood and hardened steel included laminate parallel to spurs for durability edge, prior to cutting, and scribing sawing or chiselling. accuracy. With plastic thumbscrew. Capacity: 0 - 150 (6”).

Line Weight Order Code List Offer Length per 12 KEN-597 Price/1 Price/1 30m 2.90kg -7300K £18.22 £12.03

Die Cast Zinc Alloy Case With a red satin finish. Complete with folding locking handle. Felt gasket distributes uniform chalk coating onto line. With sliding hatch for filling. Gauge Weight Order Code List Offer Model Weight Order Code List Offer Type per 12 KEN-597 Price/1 Price/1 Number each MAR-597 Price/1 Price/1 Universal hook attaches to any Marking 1.7kg -6600K £5.64 £3.72 M2049 175g -3450G £11.20 £8.96 projection or slot. Rosewood Mortice Gauge Manufactured Marking Gauge from rosewood. M2154 Chalk not Craftsman quality Manufactured from included with pull slide, rosewood, with a brass brass adjustment thumbscrew, adjusting screw and brass slide for fine adjustment plated head and brass facing strips which is wear on the front of the resistant and stock, which improves are wear resistant and Line Weight Order Code List Offer accuracy. Length per 6 KEN-597 Price/1 Price/1 Fitted with a improve single and a accuracy. 30m 2.30kg -7320K £18.22 £12.03 double spur for Fitted with a marking out single and a Refills - Large mortices. double spur for Suitable for all chalk lines. Good colour marking out fastness and weather resistance. Supplied in Capacity: mortices. 0 - 150mm (6”). squeezable bottle. Available in three colours: Blue for general use externally and internally. Red for exterior masonry work indelible in use. White for interior use such as fixing a rail.

Gauge Weight Order Code List Offer Model Weight Order Code List Offer Type per 12 KEN-597 Price/1 Price/1 Number each MAR-597 Price/1 Price/1 Mortice 1.7kg -6650K £21.20 £13.99 M2154 230g -3464W £55.29 £44.23

FatMax Chalk Line Set Large 45g chalk capacity to reduce refilling times. Rubber over moulded case for strength and better grip. High impact ABS case for durability. Sliding door for quick and easy refill. Metal crank folds into the case for ease of storage. Stainless steel end hook for added durability and rust prevention. Patented chalk view window to see exactly how much chalk you have left. 3.5 to 1 gear ratio - rewinds 3x faster. Can be used HAND TOOLS 250gm vertically as a plumb bob. NOW AVAILABLE Weight Order Code List Offer Colour each KEN-597 Price/1 Price/1 Blue 100g -7330K £2.99 £1.97 Red 100g -7340K £2.99 £1.97 White 100g -7350K £2.99 £1.97 Model Line Order Code List Offer Number Length STN-585 Price/1 Price/1 Blue 250g -7370K £4.32 £2.85 Red 250g -7380K £4.32 £2.85 5-47-681 30m -5429Y £17.24 £12.59 White 250g -7390K £4.32 £2.85

Page 1222 GROUP WOODWORKING TOOLS 597 Sliding Sliding Rafter’s Square Bevels Manufactured from hardened and Sliding bevels are used for marking angle Used for marking regular and irregular tempered ground steel. Graduated to lengths; 250 and 300mm. All measuring angles. The 9” sliding steel blade can be 2mm on one side and 1/8” and 1/16” tools are made from aluminium block and locked into any position using the brass increments on the other. In hands of a skilled with a steel blade. The thumbscrew. Rosewood stock with brass carpenter the simple rafter’s square scales are etched on tips for greater wear resistance. becomes an indispensable calculating device the surface which of immense capacity. Enabling the carpenter ensures long to easily determine the length of any durability. common, hip, valley or jack rafter for any Edge holder for pitch of roof. To make the proper cuts, top accurate and bottom as well as slide or cheek cuts for positioning. any rafter.

Head Weight Order Code List Offer Size Per 12 KEN-597 Price/1 Price/1 190mm 1.95kg -6750K £17.62 £11.63 Head Order Code List Offer 230mm 2.20kg -6790K £15.74 £10.39 Size IRW-565 Price/1 Price/1 250mm -2142P £18.12 £13.59 Try & Mitre Squares 300mm -2143Q £18.12 £13.59 Used for marking out right angles and testing squareness. Rosewood stock with brass face Tri & Mitre Square for greater wear resistance. Blades are Bevelled squares are used for marking out manufactured from hardened steel, and lines, testing squares and angle lengths. secured by steel washers with brass rivets. Body Tongue Weight Order Code List Offer Sliding bevels are used for marking angle Solid rosewood stock with solid brass facing Length (mm) per 12 KEN-597 Price/1 Price/1 lengths. All measuring tools are made from securely fixed to the stock provides a hard 610mm 406 11.1kg -6950K £18.79 £12.40 aluminium block and with a steel blade. wearing contact edge. The scales are etched on the surface which Folding ensures long durability. Edge holder for accurate positioning. Rules Traditional carpenter's extendable design allows convenient storage of a long straight measuring/marking out edge. Made from tough engineering plastic with tipped ends. Colour: white.

35 - 445: Graduated mm, figured cm one side. Graduated 1/2”, figured 1” other side. Head Order Code List Offer Size IRW-565 Price/1 Price/1 Head Weight Order Code List Offer 250mm -2139L £14.37 £10.78 Size Per 12 KEN-597 Price/1 Price/1 Product Length Order Code List Offer 300mm -2140M £15.57 £11.68 150mm (6”) 2.90kg -6860K £15.25 £10.07 Number m/feet STN-585 Price/1 Price/1 350mm -2141N £17.36 £13.02 230mm (9”) 3.80kg -6890K £18.77 £12.39 0-35-445 1m/3’ -4745D £15.47 £11.29 Combination Beechwood Folding Rules Squares Made from beechwood for strength and flexibility and painted Multi-functional. Can be used as , mitre square, depth bright yellow. Metric and inch graduations, large, clear and gauge, , marking gauge, height gauge and rule. Supplied deep for increased life and easy reading. with scribing tool. Diecast aluminium alloy head with the 6” rule and Sizes available: 1m x 5 folds: diecast zinc alloy head with the 12” rule. Precision rolled blades. 2m x 10 folds. Graduations: 45°/90° Depth Outside Mitre Metric - mm and cm Level Gauge Try Square Square (cm figures in red) -3980K Inch - 1/16”, 1/8”, 1/4”, 1/2”, 1”. HAND TOOLS HAND

Inside Marking Gauge Try Square

Supplied with scribing tool.

Blade Weight Order Code List Offer Length Per 5 KEN-597 Price/1 Price/1 150mm/6” 2.80kg -7060K £13.92 £9.19 300mm/12” 2.80kg -7120K £20.89 £13.79 Spare Lock Nut & Mandrel for 6” -7130K £3.31 £2.18 Size Order Code List Offer Spare Lock Nut & Mandrel for 12” -7132K £3.47 £2.29 KEN-518 Price/1 Price/1 Spare Scriber for 6” -7134K £2.65 £1.75 1m x 5 folds -3980K £3.86 £2.51 Spare Scriber for 12” -7136K £2.65 £1.75 2m x 10 folds -3990K £6.20 £4.03

Page 1223