About

Some facts about us..

Kelford Cams was established in 1968 in Christchurch, New Zealand. The Kelford name comes from the two founding owners Norm Kelly and Ron Rutherford. Today the company is still privately owned but has grown substantially; we export to over twenty countries with most products heading for USA, Australia, Russia, UAE and Europe. All of our camshafts are designed and machined to surpass industry standards. We use state of the art CAE software and CNC manufacturing process, and it is all done in-house so that we keep control of the procedure and the quality.

Our Vision is for Kelford Cams to be the best in the world at designing, manufacturing and distributing camshafts for use in high performance turbocharged and naturally aspirated multi valve engines.

Our Values have not changed since 1968. It’s all about winning… We do everything possible for our customers to help them achieve their expected results. We are about being ‘Better by Design’… We strive to be better than we are currently, continually design and innovate. We look at what works well today and make it even better tomorrow.

Our Catalogue range of camshafts have been formulated to cover a wide variety of motorsport applications, the lobe designs are ultra modern and proven to perform. As well as this catalogue range of cams, we will continue to offer the one-off custom designed cams that we have been well known for over the last 40+ years.

New products will be added to this print copy on regular basis but to keep up to date with our latest additions you will be able to access a pdf version of this catalogue on our websites. And if you subscribe to our newsletter, you will receive new product releases as they happen. Contents

Chevrolet 2-3 Mitsubishi 21-26 Suzuki 47 262-400 Small Block V8 2 4G63 VR4 Evo 1-3 21 M15-M16 DOHC 47 LS Series V8 3 4G63 DOHC Evo 4-7 22 Toyota 48-57 4G63 DOHC Evo 8 23 Chrysler 4 3S-GE/GTE Gen 2 48 Evo 9 MIVEC 24 Hemi 245 - 265 6 cylinder 4 3S-GE/GTE Gen 3 49 4B11-T Evo X 25 2AZ-FE Scion TC 50 Ford 5-11 4G93 Naturally Aspirated 26 4A-GE 16 Valve 51 4 cylinder 109E - 116E 4G93-T Turbocharged 26 4A-GE 20 Valve 52 Pushrod Engine 5 1FZ-FE 6 Cylinder DOHC 53 1.6 & 2.0L SOHC 6 Nissan 27-40 Datsun L14-L20 (OHC) 4 Cylinder 27 Supra 1JZ-GTE 54 Essex 3.0L V6 6 Datsun L20-28 (OHC) 6 Cylinder 28 Supra 2JZ-GTE 55 BA - FG 24 valve 7 VK56 Naturally Aspirated 29 3RZ-FE DOHC 56 Cosworth YB 7 VK56 Turbo Charged 29 Toyota / Lexus 1UZ-FE 4.0L V8 57 Cosworth BDA 8 SR20-DET S13 Turbo Charged 30 Lotus 4 Cylinder Twin Cam 8 Kelford Valve Springs 58-61 SR20-DET with NVCS 221, 260, 289 & 302 V8 9 Chevrolet 58 Turbo Charged 30 351 Windsor V8 10 Chrysler 58 SR20-DET GTi-R 31 Duratec 10 Ford 58 SR16VE/SR20VE 32 Cleveland 302-351 V8 11 Holden 58 KA24 DE/DET 33 Honda 59 Holden 12-13 VR38DETT GTR R35 34 Mazda 59 253-308 V8 12 RB20DE/T & RB25 DE/T Mitusbishi 59 EFI 304 V8 13 R31 & R32 Hydraulic Lifter 35 RB26-DETT R32/R33 Solid Lifter 36 Nissan 60 Honda 14-17 RB30 37 Seadoo / Rotax 61 B16A / B18C VTEC 14 VQ35 Gen 1 Naturally Aspirated 38 Subaru 61 B18A1 / B20B Non VTEC 15 VQ35 Gen 1 Turbo Charged 38 Suzuki 61 D16Y8 SOHC VTEC 15 VQ35-DE Gen 2 Naturally Aspirated 39 Toyota 61 H22A VTEC 16 VQ35-DE Gen 2 Turbo Charged 39 K20A & K24A2 i-VTEC 17 Additional camshaft types 62 TB48 DOHC 24 Valve 40 Jaguar 18 Sea Doo 41 3.8-4.2 6 Cylinder 18 1503 (Rotax Engine) 41 Mazda 18-20 Subaru 42-57 Miata 323 B6 Naturally Aspirated 18 EJ20 STi 1995-1998 (Version 3-4) 42 Miata 323 B6T Turbo Charged 19 EJ20 WRX STi NON AVCS BP-BPT Hydraulic Lifter 19 (Version 5+) 43 MZR LF-L3 2.0-2.3L 20 EJ20 WRX STi (Version 7-10) 44

BMW Mini 20 EJ25 WRX STi 2004-Current 45 Mini (Tritec) 200-2006 20 EJ257B STi Dual AVCS 2008-Current 46 Chevrolet 262-400 Small Block V8

The selection of camshafts below is to suit the 1955-1987 Small Block Chevrolet V8 engine originally equipped with a flat tappet camshaft and hydraulic lifters. Our range of hydraulic roller lifter cams, solid roller lifter cams and solid flat tappet cams is too large to list therefore these are made to order to suit your requirements. Turnaround time on ‘made to order’ camshafts from us is generally three to five days.

Advertised Duration Duration Valve Lift @.006" @ .050" @ 1.5:1 Suggested Pushrod Lift Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @ TDC SX profiles feature ultra modern lobe designs with low advertised duration and maximum lobe area, giving great throttle response and lots of power through the RPM range In Ex In Ex In Ex In Ex In Ex SX105-A SX-246 Fuel economy cam to suit 305-327 small block Chevy V8 246 246 202 202 .420" .420" 108 114 .028" .016" SX105-B SX-256 For applications needing high torque while retaining good economy 256 264 212 218 .459" .459" 106 114 .050" .036" and idle SX105-C SX-262 Mild performance camshaft to suit low compression engine, 262 272 218 225 .470" .470" 106 114 .059" .046" slight idle SX105-D SX-268 High performance camshaft, noticeable idle, 9 to 1 + compression, 268 276 224 230 .486" .486" 106 114 .068" .053" largest cam for stock converter SX105-E SX-274 Street / strip high performance cam, rough idle, very strong 274 284 232 238 .500" .500" 106 114 .081" .064" midrange power, 2200 converter, suits 383-400 SX105-F SX-280 Street / strip high performance cam, rough idle, very strong 280 288 236 240 .507" .507" 106 112 .088" .074" midrange power, 2600 converter SX105-G SX-286 Street / strip high performance cam, rough idle, very strong 286 294 242 248 .515" .515" 105 111 .102" .091" mid-top end power, 3000 converter SX105-H SX-292 High performance race cam, rough idle, very strong top end power, 292 300 248 254 .530" .530" 104 110 .116" .104" 3300 converter

Original ‘old school’ cam profiles that have been popular with our customers over the last 40 years In Ex In Ex In Ex In Ex In Ex 105-A H50 Strong torque in small CI engines, good economy 252 252 206 206 .401" .401" 108 114 0.036 .022" 105-B H60 Strong midrange in 350 CI near stock engines 260 260 212 212 .420" .420" 108 112 .044" .035" 105-C H70 Good midrange in 383-400 CI, mild idle, stock converter 270 270 224 224 .450" .450" 106 114 .068" .045" 105-D H80 Rough idle street machine cam, 2500 converter 280 280 230 230 .459" .459" 106 112 .077" .059" 105-E H90 Monster idle, street machine cam, big exhaust sound, 2800 converter 290 290 240 240 .480" .480" 106 112 .093" .074" 105-X Custom hydraulic lifter flat tappet cam for Chevrolet small block V8 engine. Contact us for specifications to suit you. 105-S Custom solid lifter flat tapper cam for Chevrolet small block V8 engine engines. Contact us for specifications to suit you as there are too many to list. 105-HR Custom hydraulic roller lifter cam for Chevrolet small block V8 engine. Contact us for specifications to suit you as there are too many to list. 105-SR Custom solid roller lifter cam for Chevrolet small block V8 engine. Contact us for specifications to suit you as there are too many to list.

Matching Components for Chevrolet 262-400 Small Block V8 SX105 105 Part No Description A B C D E F G H A B C D E HT817 Genuine GM Delphi hydraulic lifter set • • • • • • • • • • • • • KVS4843 Chevrolet V8 high performance single valve spring set • • • • • • • • • • 986-16 Chevrolet V8 high performance dual valve spring set • • • 740-16 Chromoly retainers to suit 986 valve spring • • • 613-16 11/32 10 degree superlocks to suit 986 & 740 • • • 3100 Comp three keyway adjustable timing gear & chain set • • • • • • • • • • • • •

2 Chevrolet LS Series V8

The catalogue cams listed here come from many years of design, development and testing. We believe that we have the best lobe designs in the industry. Our profiles feature more duration at .200" (for the same at .050") while retaining the desired level of valve train control. This results in greater power over a wider RPM range for our customers.

Advertised Duration Duration Valve Lift @ .006" @ .050" @ 1.7:1 Pushrod Lift Lobe Part No Application Cam Lift Cam Lift Rocker Ratio @ TDC Separation Kelford Cams’ well proven endurance camshaft designs for LS engines. Featuring maximum lobe area and stable valve train to give you proven performance every time In Ex In Ex In Ex In Ex 108-K Replacement cam for Callaway HSV 300KW engines. This cam fixes the 274 278 218 222 .561" .561" .043" .038" 115 valve spring reliability issue in these engines SS108-A LS 5.7-6.2L Mild performance upgrade camshaft, great for daily driven 270 276 222 226 .575" .575" .047" .042" 114 cars with auto trans. Great economy, smooth idle SS108-D LS 5.7 - 6.2L Great all round performance cam upgrade for auto or 274 282 226 232 .580" .580" .054" .052" 114 manual transmission LS engines. Smooth idle, good economy SS108-J Designed for jet boat applications where low end response and mid range 274 282 226 232 .600" .600" .069" .063" 110 torque is more important than high RPM power SS108-H Great midrange performance cam for manual or auto. Retains good low 274 282 227 232 .610" .610" .058" .053" 113 end response in a daily driven Commodore LS3/L98 SS108-C 5.7-6.2L High performance camshaft with low overlap for use in LS 276 288 228 238 .600" .600" .047" .057" 116 engines fitted with a supercharger HS108-B 276-High lift camshaft for 6.0-6.2, L98 / LS3 (large port) engines. For 276 284 228 234 .630" .610" .056" .059" 113 those that require that extra edge over the competition while retaining good driving manners SS108-B LS 5.7-6.2L, Strong midrange-top end performance cam. Largest cam for 278 286 230 236 .600" .600" .064" .059" 113 stock piston LS1 SS108-B12 The B-12 features increased overlap to give great midrange power in 5.7L 282 290 230 236 .600" .600" .065" .062" 112 LS1 engines. Designed specifically to produce a rough idle! SS108-E Great top end performance cam. Extra valve to piston clearance required in 282 290 234 240 .610" .610" .069" .066" 113 LS1 motors. Rough idle HS108-D 284 High lift camshaft for 6.0-6.2 engines. Top end street driven 284 292 236 242 .630" .610" .070" .070" 112 Commodore / Camaro cam. Rough idle SS108-M Racing camshaft specifically designed for mid range and top end 288 294 238 244 .610" .600" .075" .077" 111 performance engines used in Drifting competition. Rough idle SS108-G Racing camshaft for well built engines. Great in L98/LS3 jet sprint boat or 294 306 244 254 .630" .630" .098" .097" 110 street / strip car. Rough idle 108-X Custom LS cams to suit hydraulic or solid roller lifters available for any application. We can manufacture to your specification or design something specifically for you.

All of the camshafts listed above are available as three bolt or single bolt.

Matching Components for Chevrolet LS Series V8 108 SS108 HS108 Part No Description K A D J H C B B12 E M G B D KVS4918 Ovate wire beehive valve spring set • • • • • • • • • KVS1518 Nitrided ovate wire beehive valve spring set • • • • • • • • • • • • • 7102 LS1 & 2 double row timing set for three bolt camshaft • • • • • • • • • • • • • 7105 LS2 double row timing set for single bolt camshaft • • • • • • • • • • • • • 7106 LS1-3 double row timing set to convert from single to 3 bolt cam • • • • • • • • • • • • •

3 Chrysler Hemi 245 - 265 6 Cylinder

This range of camshafts to suit the Chrysler Hemi 6, come from 40 years experience working with these engines. Whether it be a daily driven classic or a full competition engine, we can supply the correct camshaft and related valve train parts for your build.

Hydraulic Lifter

Advertised Duration Duration Valve Lift @ .006" @ .050" @ 1.7:1 Suggested Pushrod Lift Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @ TDC In Ex In Ex In Ex In Ex In Ex 115-A Mild camshaft upgrade. Suits stock engines and automatic or manual 250 250 205 205 0.454" 0.454" 107 115 0.037" 0.018" transmission 115-B Mid range street performance cam, Suits stock converter automatic, or 270 270 218 218 0.484" 0.484" 106 114 0.056" 0.034" manual transmission 115-C High performance camshaft to suit mildly modified Hemi 6 engines. 284 284 225 225 0.484" 0.484" 106 112 0.068" 0.047" Best with a manual transmission 115-D Kelford E49 upgrade. Developed as a higher performance version of the 294 294 234 234 0.496" 0.496" 105 113 0.085" 0.056" original E49 camshaft. Suits triple carbs or four barrel carb

Solid Lifter

Advertised Duration Duration Valve Lift @ .016" @ .050" @ 1.7:1 Suggested Pushrod Lift Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @ TDC In Ex In Ex In Ex In Ex In Ex 115-SB Racing camshaft to suit well developed Hemi 6. Suits 11:1+ compression, 296 300 249 253 0.570" 0.550" 103 109 0.102" 0.083" 4 barrel ot triple carbs. Must use solid lifters 115-SC Racing camshaft to suit well developed Hemi 6. Suits 12:1+ compression, 302 306 256 260 0.582" 0.582" 103 107 0.115" 0.104" triple carbs, CHI head. Must use solid lifters 115-X Hemi 6 cam, custom designed to suit your needs or ground to your supplied specifications.

Matching Components for Chrysler Hemi 6 Cylinder

115 Part No Description A B C D SB SC 60062 15 tooth oil pump drive gear • • • • • • KVS265 High performance single valve spring set with damper • • • • CS6265 Chrysler Hemi double row timing chain and gear set • • • • • • HT2011 Federal Mogul hydraulic lifters matched to our cam profiles • • • • CC2901-12 Comp cams solid lifters with EDM technology oiling hole • • CHI HEAD CHI alloy cylinder head • • • • • •

4 Ford 4 Cylinder 109E - 116E Pushrod Engine

Bred from many years of modifying and racing these ourselves. The Kelford range is among the best you will find anywhere in the world for this classic engine.

Duration Duration Valve Lift @ .015" @ .050" @ 1.54:1 Suggested Valve Lift Valve Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @ TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex 150-A Mild performance cam, one step up from a GT 258 258 216 216 .388" .388" 107 109 .068" .059" .012" .014" 150-B Fast road cam, suits single down draught or twin side 278 283 230 232 .402" .400" 105 109 .091" .079" .018" .018" draught carbs 150-C Club race or rally cam, suits twin 40's, 145HP engine 290 295 242 247 .446" .439" 104 110 .132" .114" .016" .016" 150-D Rally and race cam, suits 45's, good head, 155HP 290 300 248 252 .480" .480" 103 110 .152" .123" .016" .016" 150-J Formula Junior single seater camshaft (Between A6 & A8) 310 310 253 253 .430" .430" 103 103 .145" .145" .016" .016" 150-E Full race, suits light car, professionally built 305 305 262 262 .470" .470" 100 106 .198" .167" .016" .016" high spec engine 150-F Full race, suits professionally built competition engine 320 320 264 264 .485" .485" 100 104 .195" .175" .016" .016" 150-X Custom solid lifter cam for Ford 4 cylinder 109E - 116E Pushrod engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Ford 4 Cylinder 109E - 116E Pushrod Engine

150 Part No Description A B C J D E F KVS401 High performance single valve spring set • • KVS402 Pacaloy dual valve spring set • • • • • RET1600 Valve spring retainers to suit KVS401 & KVS402 • • • • • • • CS41500 Double row, keyway adjustable, timing chain and gear set • • • • • • •

5 Ford 1.6 & 2.0L SOHC

Originally made in Germany and used in Ford Cortina, Escort and Sierra cars through the 1970’s and 80’s, and still remains a popular engine for classic racing today.

Duration Valve Lift Advertised @ .050" @ 1.6:1 Suggested Valve Lift Valve Part No Application Duration Valve Lift Rocker Ratio Centrelines @ TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex 145-A Mild street performance camshaft, suits the stock carb 268 280 226 234 .400" .400" 108 110 .069" .077" .009" .009" 145-B Fast street performance cam, suits the stock carb 274 278 232 232 .448" .450" 106 110 .086" .069" .010" .010" 145-C Club race cam for mildly tuned engines, suits either single or twin 274 284 236 245 .424" .424" 105 109 .104" .101" .008" .009" Webers 145-D Hill Climb, Rally and Targa cam, must have compression increase, 288 288 252 254 .488" .462" 105 109 .132" .135" .011" .009" sidedrafts or injection 145-E Rally cam, suits twin 40's, big valve head etc 288 288 254 254 .460" .460" 104 108 .158" .140" .009" .009" 145-F Full race cam, suits professionally built, high compression, 315 315 272 272 .520" .520" 100 107 .207" .173" .011" .011" competition engines 145-X Custom solid lifter cam for Ford 1.6 - 2.0L SOHC engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Ford 1.6 - 2.0L SOHC

145 Part No Description A B C D F KVS2004-K High performance 'single' valve spring and chrome moly retainer set • • • KVS42-K Ultimate performance, beehive spring and titanium retainer set • • • CS42000-V Adjustable cam gear (steel) • • • • • CS42000-VAA Super lightweight adjustable cam gear with alloy inner and outer sections • • • • •

Ford Essex 3.0L V6 1966-1981

This range of camshafts is a collection of what has been used by local racers over the last 40 years that we have been grinding these cams.

Duration Duration Valve Lift @ .015" @ .050" @ 1.47:1 Suggested Cam Lift Valve Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex 152-A Mild road cam, (Genuine Capri GT specification) 264 300 216 220 .396" .396" 109 109 .047" .052" .018" .024" 152-B High performance street cam 276 283 230 232 .420" .386" 107 111 .071" .062" .014" .016" 152-D Mild rally cam 295 295 247 245 .441" .422" 105 111 .097" .082" .015" .015" 152-E Rally / race cam 302 302 252 252 .458" .458" 104 110 .109" .091" .015" .015" 152-F Race cam for well built engines 305 305 262 262 .449" .449" 103 109 .132" .109" .016" .016" 152-G Full race cam for professionally built competition engines 304 315 262 264 .515" .510" 100 106 .138" .119" .012" .016" 152-X Custom solid lifter cam for Ford 3.0L Essex V6 engines. We can manufacture cams to your specifications or design a profile for your specific application.

6 Ford BA - FG 24 Valve

The Kelford range of camshafts for the Ford 4.0L Barra engine have been developed and tested with proven results. These camshafts and the Kelford designed Pacaloy valve springs suit mild street performance through to pro drag racing applications.

Duration Advertised @ 1mm Valve Part No Application Duration Valve lift Valve Lift Centrelines Lift @ TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex BA Spec of the stock BA cam for reference only 255 247 209 202 11.4mm 11.4mm Vari Vari Vari Vari HYD HYD FG Spec of the stock FG-F6 cam for reference only 258 258 213 213 11.4mm 11.4mm Vari Vari Vari Vari HYD HYD 218-A High performance camshafts to Suit BA-FG turbo 268 268 224 224 11.6mm 11.6mm Vari Vari Vari Vari HYD HYD engines. (503wHP in the Kelford Car on 15lb). Can use OEM valve spring at stock boost RPM limit. Past that, KVS40-K spring set is required 218-B Racing camshafts to suit well built engines with a 280 280 236 236 12.30mm 12.30mm Vari Vari Vari Vari HYD HYD turbo charger upgrade. Suits 500-800HP range. Requires our KVS40-K valve spring kit 218-C Pro drag racing camshafts to suit competition cars 296 296 250 250 12.8mm 12.8mm 110 118 2.60mm 1.63mm HYD HYD only. Use on fixed cam timing (not variable) Requires our valve spring set 218-X Custom camshafts (solid or hydraulic) built to your any specification you require.

Matching Components for Ford BA - FG 24 Valve

218 Part No Description A B C KVS40-K Ovate wire, beehive design Pacaloy valve springs. Featuring nanopeened and gold nitride surface finish processing. Complete set with chrome moly retainers • • •

Ford Cosworth YB

The YB Cosworth cams listed below cover a range of uses. From modified Sierra RS road and race cars to High HP naturally aspirated rally, circuit and dirt track applications. These camshaft profiles are modern and well proven.

Duration Advertised @ 1mm Suggested Part No Application Duration Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearance In Ex In Ex In Ex In Ex In Ex In Ex 146-A Stage 1 turbo cams, BD15 upgrade 264 264 222 222 10.25mm 10.25mm 108 115 1.30mm 0.66mm HYD HYD 146-B Stage 2 turbo cams to suit larger turbocharger, 272 272 232 232 11.12mm 11.12mm 110 117 1.90mm 1.11mm HYD HYD high HP engine builds 146-C Solid lifter rally or track racing camshafts. 314 304 263 258 12.75mm 11.20mm 102 106 4.95mm 3.60mm 0.25mm 0.25mm Requires head machining to fit 146-D Solid lifter racing camshafts for professionally 336 326 277 265 14.22mm 11.95mm 102 98 5.38mm 4.47mm 0.25mm 0.25mm built competition engines over 300HP 146-X Custom YB Cosworth cam set (solid or hydraulic). We can manufacture cams to your specifications or design a profile for your specific application.

Kelford Cams for Ford Cosworth YB are made on the 4wd cam casting. To use them in 2wd applications spacer YB2WDS must be fitted.

7 Ford Cosworth BDA

The BDA was originally developed by Cosworth in association with Ford in 1969. Since then it has been used in many different configurations for many different racing classes. Today the ‘BD’ resurgence is bigger than ever and at Kelford Cams we still make many sets of these camshafts for all applications.

Duration Duration @ .010" @ .050" Suggested Valve Lift Valve Part No Application Cam Lift Valve Lift Valve Lift Centrelines @ TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex 147-A 1600 BDA Stage 1 performance cams 290 296 241 237 .380" .334" 106 108 .111" .088" .010" .010" 147-B Cosworth BD2 292 292 246 246 .344" .344" 106 106 .118" .118" .008" .008" 147-C Cosworth L1 / BD3 308 295 252 237 .402" .334" 104 108 .144" .087" .010" .010" 147-D Kelford rally cams for BDG 312 298 256 243 .418" .398" 102 108 .164" .110" .010" .010" 147-E Kelford, BDG rally cams (L146 / DA10) 300 310 258 258 .435" .400" 102 108 .171" .136" .008" .010" 147-F Cosworth BD4 / L1 322 308 261 247 .426" .404" 100 108 .178" .131" .008" .008" 147-H Cosworth EA1 / BD4 325 328 269 261 .448" .426" 100 106 .201" .155" .010" .010" 147-I Cosworth F1 BDD Formula Atlantic 325 325 269 269 .400" .400" 100 103 .188" .176" .010" .010" 147-J Race cams with high lift intake & F1 exhaust 328 325 271 269 .432" .400" 100 103 .210" 176" .010" .010" 147-X Custom solid lifter cam for Ford 4 cylinder Cosworth BDA engines. We can manufacture cams to your specifications or design a profile for your specific application.

Ford Lotus 4 Cylinder Twin Cam

The Ford Lotus Twin Cam was made from 1962-1974 and powered the Lotus Elan, Europa, Lotus Seven, Ford Cortina and Escort Twin Cam. We have been modifying and producing camshafts for this engine for close to forty years so we can help you achieve your desired result from your twin cam.

Duration Duration @ .010" @.050" Suggested Valve Lift Valve Part No Application Cam Lift Valve Lift Valve Lift Centrelines @ TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex 148-A Mild street performance cam 272 272 230 230 .347" .347" 107 111 .085" .067" .009" .009" 148-B Performance cams for mildly tuned engines 278 288 235 235 .417" .405" 105 110 .114" .080" .008" .010" 148-C High performance street car cams 292 292 243 244 .422" .404" 103 110 .128" .106" .008" .008" 148-D Club race or mild rally car cams 302 302 253 253 .425" .401" 103 108 .153" .130" .010" .010" 148-E Performance cams for larger capacity engines 298 312 255 259 .432" .398" 102 108 .170" .138" .008" .010" 148-F Race cams for serious engine builds 318 328 257 260 .444" .426" 102 106 .183" .154" .010" .010" 148-G Race cams for serious engine builds 328 328 264 264 .444" .444" 100 104 .193" .175" .010" .010" 148-H Race cams for serious engine builds 328 328 268 268 .447" .447" 100 104 .201" .185" .010" .010" 148-I Race cams for serious engine builds 335 335 273 273 .484" .484" 98 102 .222" .206" .010" .010" 148-X Custom solid lifter cam for Ford 4 cylinder Lotus twin cam engines. We can manufacture cams to your specifications or design a profile for your specific application.

8 Ford 221, 260, 289 & 302 V8 1963-1985

This Kelford SX hydraulic flat tappet range features ultra modern lobe designs that give you great throttle response and loads of power through the entire RPM range.

Duration Duration Valve Lift @ .006" @ .050" @ 1.6:1 Suggested Cam Lift Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @ TDC In Ex In Ex In Ex In Ex In Ex 125-A SX248 Fuel economy cam for 221-302 248 248 202 202 .445" .445" 110 112 .024" .020" 125-B SX256 Fuel economy cam for 351W mild performance 256 256 206 206 .445" .445" 107 113 .039" .025" 125-C SX260 Mild performance, good economy and idle 260 260 212 212 .445" .445" 106 114 .050" .030" 125-D SX264 Hot street cam, strong midrange 264 270 218 224 .480" .480" 106 114 .060" .046" 125-E SX268 Street muscle cam, largest cam with stock converter 268 276 224 230 .500" .500" 106 114 .065" .051" 125-F SX274 Street / strip, 2500 stall, rough idle, suits 347 stroker 274 286 230 236 .515" .515" 106 112 .079" .069" 125-G SX284 Street / strip, suits 347 or larger, 3000 converter, rough idle 284 296 240 246 .540" .540" 106 112 .098" .083" 125-X Custom hydraulic lifter flat tappet cam for Ford 8 cylinder 221-302 Windsor engines. Contact us for specifications to suit you as there are too many to list. 125-S Custom solid lifter flat tappet cam for Ford 221-302 Windsor engines. Contact us for specifications to suit you as there are too many to list. 125-HR Custom hydraulic roller lifter cam for Ford 221-302 Windsor engines. (Uses late model firing order) Contact us for specifications to suit you as there are too many to list. 125-SR Custom solid roller lifter cam for Ford 221-302 Windsor engines. (Uses late model firing order) Contact us for specifications to suit you as there are too many to list.

Matching Components for Ford 221, 260, 289 & 302 V8 1963-1985

125 Part No Description A B C D E F G 942 Ford 221/302 Windsor single valve spring set with damper • • • • •

768 Chromoly retainers to suit 942 springs • • • • • 3120 Ford Windsor, double row, adjustable timing chain set • • • • • • • HT900 Sealed Power or Johnson, hydraulic lifter set • • • • • • •

9 Ford 351 Windsor V8

This Kelford SX hydraulic flat tappet range features ultra modern lobe designs that give you great throttle response and loads of power throughout the entire RPM range.

Duration Duration Valve Lift @ .006" @ .050" @ 1.6:1 Suggested Cam Lift Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @TDC In Ex In Ex In Ex In Ex In Ex 122-B SX250 Stage1 upgrade - smooth idle and good fuel economy 252 252 206 206 .445" .445" 108 114 .037" .025" 122-C SX260 High torque cam for near stock engine, good idle 260 260 212 212 .445" .445" 106 114 .050" .030" 122-D SX264 Mild street cam, strong midrange in 9.0:1 engines 264 270 218 224 .480" .480" 106 114 .060" .046" 122-E SX268 Street muscle cam, largest cam with stock converter 268 276 224 230 .500" .500" 106 114 .065" .051" 122-F SX274 Street / strip, 2500 stall, rough idle, suits stroker 274 286 230 236 .515" .515" 106 112 .079" .069" 122-G SX284 Street / strip, 3000 stall, rough idle, suits stroker 284 296 240 246 .540" .540" 106 112 .098" .083" 122-X Custom hydraulic lifter flat tappet cam for Ford 351 Windsor engines. Contact us for specifications to suit you as there are too many to list. 122-S Custom solid lifter flat tapper cam for Ford 351 Windsor engines. Contact us for specifications to suit you as there are too many to list. 122-HR Custom hydraulic roller lifter cam for Ford 351 Windsor engines. Contact us for specifications to suit you as there are too many to list. 122-SR Custom solid roller lifter cam for Ford 351 Windsor engines. Contact us for specifications to suit you as there are too many to list.

Matching Components for Ford 351 Windsor V8

122 Part No Description B C D E F G 3135 Ford 351 Windsor (1969-84) double row, 3 keyway, adjustable timing chain set • • • • • • HT900 Sealed Power or Johnson, hydraulic lifters for Ford Windsor V8 with flat tappet camshafts • • • • • •

Ford Duratec

The 4 cylinder Ford Duratec 2.0L engine continues to be a popular retro-fit choice for many Mk1 / Mk2 Escort owners. The Kelford Cams’ range is designed to cover mild to wild Duratec engine builds.

Duration Advertised @ 1mm Valve Part No Application Duration Valve Lift Valve Lift Centrelines Lift @TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex 240-A Mild track day or street performance cam for near stock 276 270 240 232 9.90mm 9.60mm 103 107 2.80mm 1.92mm 0.25mm 0.30mm Duratec 2.0L engines. Requires programable ECU 240-B Mid-range performance camshaft for mild club race 284 276 248 240 10.50mm 10.20mm 103 105 3.45mm 2.70mm 0.25mm 0.30mm / rally car applications with limited modifications 240-C Racing camshafts for well prepared engines. Suits 296 284 258 248 11.20mm 10.50mm 100 104 4.50mm 3.37mm 0.25mm 0.30mm higher compression after market plenum manifold or Individual runners 240-T 272 degree camshafts for turbocharged Duratec 272 272 232 232 9.60mm 9.60mm 108 116 1.80mm 0.95mm 0.25mm 0.30mm engines built for the 350-550HP range T240-X Custom cams for Ford Duratech engines. We can manufacture cams to your specifications or design a profile for your specific application.

10 Ford Cleveland 302-351 V8 1970-1982

Our range for Ford 302-351 Cleveland Flat Tappet Hydraulic Lifter engines (1970 - 1982) feature ultra modern lobe designs.

Duration Duration Valve Lift @ .006" @ .050" @ 1.73:1 Suggested Cam Lift Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @TDC In Ex In Ex In Ex In Ex In Ex 130-A High torque cam, great for towing, good idle 252 252 206 206 .465" .465" 106 114 .040" .022" 130-B Mild performance cam, good idle, good torque 260 264 212 218 .500" .500" 106 114 .050" .030" 130-C Mild street performance cam, slight idle 264 272 218 225 .515" .515" 106 114 .060" .046" 130-D Our most popular Cleveland cam, great midrange power 272 278 225 230 .530" .530" 106 114 .066" .051" 130-E Street / strip cam, rough idle, 2000+ stall 278 286 230 236 .550" .550" 105 111 .082" .072" 130-F Race cam, rough idle, 3000+ stall 288 294 240 246 .575" .575" 105 111 .102" .086" 130-X Custom hydraulic lifter flat tappet cam for Ford 8 cylinder 302-351 Cleveland engines. Contact us for specifications to suit you as there are too many to list. 130-S Custom solid lifter flat tapper cam for Ford 8 cylinder 302-351 Cleveland engines. Contact us for specifications to suit you as there are too many to list. 130-HR Custom hydraulic roller lifter cam for Ford 8 cylinder 302-351 Cleveland engines. Contact us for specifications to suit you as there are too many to list. 130-SR Custom solid roller lifter cam for Ford 8 cylinder 302-351 Cleveland engines. Contact us for specifications to suit you as there are too many to list.

Matching Components for Ford Cleveland 302-351 V8 1970-1982

130 Part No Description A B C D E F 351K Ford Cleveland valve spring, retainer & lock kit • • • • 924 Ford Cleveland dual valve spring set • • 741 Chromoly retainers to suit 924 valve spring • • 611 Super locks to suit single groove valves • • 624 Super locks to suit stock style multi groove valves • • 3121 Ford 302-351 Cleveland, 3 keyway, double row timing set • • • • • • HT900 Sealed Power or Johnson, hydraulic lifter set • • • • • •

11 Holden 253-308 V8 1970-1988

The modern SX cams are our latest technology designs featuring lower ‘seat to seat duration’ and maximum lobe area, offering better power spread and driveability. The 165 cams are our original range for this engine, proven to perform over many years.

Advertised Duration Duration Valve Lift @ .006" @ .050" @ 1.6:1 Suggested Cam Lift Part No Application Cam Lift Cam Lift Rocker Ratio Centrelines @ TDC Kelford latest technology camshaft grinds In Ex In Ex In Ex In Ex In Ex SX165-A SX250 High torque, good economy, one step up from stock 250 250 206 206 .445" .445" 107 117 .039" .018" SX165-B SX260 Mild performance upgrade for near stock engines 260 260 212 212 .445" .446" 106 114 .050" .029" SX165-C SX266 All round performer for mild engine, stock converter, mild idle 266 266 218 218 .488" .488" 106 114 .059" .039" SX165-D SX270 Strong street performance, manual or 2000 converter, 270 270 225 225 .500" .500" 106 114 .070" .046" noticeable idle SX165-E SX280 Suits 9.5/1 compression, four barrel, headers, manual or 2500 280 280 230 230 .518" .518" 105 113 .082" .057" converter, rough idle

Matching Components for Holden 253-308 V8 1970-1988

165 SX165 Part No Description A B C D E A B C D E HT969 Genuine Delphi GM lifters for Holden V8 engines • • • • • • • • • • KVS4843 Holden V8 high performance single valve spring set • • • • • • • • • • CS8308 Holden 253 - 308, adjustable timing set • • • • • • • • • •

12 Holden EFI 304 V8

The Holden 304 V8 EFI engine uses a different cam casting to the 253-308 engine. The Kelford range for Holden 304 engines is endless, we offer these baseline cams and of course can manufacture any other specification as a hydraulic, solid or roller lifter camshaft.

Advertised Duration Duration Valve Lift @ .006" @ .050" @ 1.6:1 Lobe Suggested Cam Lift Part No Application Cam Lift Cam Lift Rocker Ratio Separation Centrelines @ TDC In Ex In Ex In Ex In Ex In Ex 170-A Suitable for standard engines 256 256 206 206 .427" .427" 114 110 118 .031" .016" 170-B Ideal replacement for more performance in automatic. 264 264 212 212 .446" .446" 113 110 116 .040" .026" Reflash ECU for better results 170-C Performance cam suits manual or auto in light car. 268 268 216 216 .490" .490" 112 107 117 .050" .026" Requires ECU reflash 170-D Lopey idle requires hi stall or manual. Requires ECU reflash 272 272 224 224 .480" .480" 112 107 117 .065" .037" 170-E Our biggest hydraulic grind for standard inlet manifolds, requires 284 284 234 234 .520" .520" 110 105 115 .084" .053" hi stall or manual and ECU Reflash. Still streetable

The camshafts listed above are made on centrelines to suit EFI. If you are using a carburettor, the camshafts above can be ordered on tighter lobe seperation. Simply specify carb or EFI when ordering.

Part No Application 170-X Custom hydraulic lifter flat tappet cam for Holden EFI 304 V8 engines. Contact us for specifications to suit you. 170-S Custom solid lifter flat tapper cam for Holden EFI 304 V8 engines. Contact us for specifications to suit you. 170-SR Custom solid roller lifter cam for Holden EFI 304 V8 engines. Contact us for specifications to suit you.

Matching Components for Holden EFI 304 V8

170 Part No Description A B C D E KVS4843 Holden V8 high performance single valve spring set • • • • 986 Dual valve spring set (requires head machining) • 743 Retainer set to suit 986 valve springs • • • • • HT969 Genuine Delphi GM lifters for Holden V8 engines • • • • •

13 Honda B16A / B18C VTEC

The Kelford range of B series camshafts has been designed and refined over many years of racing. We cover the range of requirements from street performance to track racing to monster motor builds and turbo builds. And of course, we can also make any other specification you desire.

Duration Duration Nett Valve Lift @ 0.1mm @ 1mm @ 1.55:1 Suggested Valve Clearance Part No Application Valve Lift Valve Lift Rocker Ratio Centrelines Valve Lift @ TDC Hot @ Valve In Ex In Ex In Ex In Ex In Ex In Ex 176-B The ultimate Stage 1 performance camshafts for 284 280 254 248 11.80mm 11.30mm 104 106 3.96mm 3.10mm 0.30mm 0.30mm B series, requires KVS18 valve spring, computer and exhaust upgrade Primary lobes for 176-B 242 236 198 186 6.00mm 5.8mm 107 103 0.56mm 0.48mm 0.30mm 0.30mm Intermediate lobes for 176-B 242 246 200 202 8.40mm 7.8mm 107 107 0.56mm 0.64mm 0.30mm 0.30mm 176-C B series racing cams. Large low lobe spec for 294 286 264 256 11.80mm 11.30mm 102 104 4.70mm 3.86mm 0.30mm 0.30mm improved torque in lower RPM. Super strong midrange power, rough idle on plenum manifolds Primary lobes for 176-C 270 262 230 220 11.00mm 10.00mm 104 104 2.26mm 1.52mm 0.30mm 0.30mm Intermediate lobes for 176-C 270 262 230 220 11.00mm 10.00mm 104 104 2.26mm 1.52mm 0.30mm 0.30mm 176-R1 Vtec Allmotor Drag racing cams. Head 304 298 274 266 13.00mm 11.30mm 101 104 5.68mm 4.40mm 0.30mm 0.30mm modifications are required to avoid valve to valve contact. Ideal for long stroke engines

Primary lobes for 176-R1 270 262 230 220 11.00mm 10.00mm 104 104 2.26mm 1.52mm 0.30mm 0.30mm Intermediate lobes for 176-R1 270 262 230 220 11.00mm 10.00mm 104 104 2.26mm 1.52mm 0.30mm 0.30mm 176-T Special design camshafts, to suit high horsepower 284 274 254 246 11.25mm 11.00mm 108 115 3.07mm 1.84mm 0.30mm 0.30mm turbocharged B series engines in the 600-1000HP range Primary lobes for 176-T 250 250 208 208 7.00mm 7.00mm 102 105 1.20mm 1.01mm 0.30mm 0.30mm Intermediate lobes for 176-T 254 250 214 208 8.60mm 7.00mm 102 105 1.55mm 1.01mm 0.30mm 0.30mm 176-X Custom mechanical cams for Honda B16A/B18C VTEC mechanical engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Honda B16A / B18C VTEC

176 Part No Description B C R1 T KVS18 High performance valve spring set, ‘drop in’ on stock retainers • • KVS18K High performance valve spring & titanium retainer kit • • • •

14 Honda B18A1 / B20B NON VTEC

Kelford Cams range for the Honda B18-B20 non vtec engines feature maximum area designs to achieve superior performance. From mild street performance to full race engines, Kelford Cams are the first choice for many racers and engine builders worldwide.

Duration Advertised @ 1mm Valve Lift @ 1.73:1 Suggested Part No Application Duration Valve Lift Rocker Ratio Centerlines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex 238-A Mild performance camshafts for naturally aspirated engines with 268 260 226 218 11.00mm 10.50mm 104 108 1.80mm 1.08mm limited modifications 238-B High performance camshafts to suit modified engines. 288 280 244 238 11.00mm 10.50mm 103 105 2.72mm 2.31mm Requires a programable ECU 238-C Top end performance camshafts to suit highly modified 296 286 254 244 11.50mm 10.50mm 100 104 3.89mm 2.74mm racing engines 238-T 272 degree camshafts for turbocharged street, strip and track 268 268 226 226 11.00mm 11.00mm 110 114 1.24mm 0.93mm racing engines 238-X Custom grind camshafts. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Honda B18A1 / B20 238 Part No Description A B C T KVS13D High performance dual valve spring set for Honda B18A / B20B performance engines • • • •

Honda D16Y8 SOHC VTEC (1996-2000)

Kelford Cams range of D16 camshafts are made for those that want great power gains without swapping out the motor for a B16/18. These camshafts also suit the New Zealand market D16Y6.

Duration Nett Valve Lift Advertised @ 1mm @ 1.61/1 Valve Part No Application Duration Valve Lift Rocker Ratio Centerlines Valve Lift @ TDC Clearances VTEC Intake In Ex In Ex In Ex In / Ex In Ex 242-A Mid range performance camshaft for mildly tuned 276 262 236 220 11.10mm 10.20mm 106 / 110 2.13mm 0.96mm 0.30mm engines. Suits stock valve spring, requires ECU re-flash 0.30mm 242- A Low speed intake 244 200 7.00mm 114 242-B Top end performance cam to suit highly modified 288 278 252 240 13.00mm 11.50mm 102 / 106 3.73mm 2.33mm 0.30mm naturally aspirated racing engines 0.30mm 242-B Low speed intake 268 228 8.40mm 110 242-T Low overlap camshaft to suit high horsepower, 272 272 232 232 11.50mm 11.50mm 110 / 116 1.52mm 0.94mm 0.30mm turbocharged D series engines 0.30mm 242-T low speed intake 268 228 8.40mm 112

15 Honda H22A VTEC

H22 VTEC engines are fantastic for the tuner market; they offer large displacement, fantastic bore stroke combinations, great airflow and have huge power potential in N/A and turbo form. The Kelford range of H22 camshafts feature the same lobe designs as our popular B series cams to cover the needs of most motorsport uses.

Duration Duration Nett Valve Lift @ 0.1mm @ 1mm @ 1.55:1 Suggested Nett Valve Valve Clearance Part No Application Valve Lift Valve Lift Rocker Ratio Centrelines Lift @ TDC Hot @ Valve In Ex In Ex In Ex In Ex In Ex In Ex H176-B Ultimate street performance H series 284 280 254 248 11.80mm 11.30mm 104 106 3.96mm 3.10mm 0.30mm 0.30mm camshafts, requires computer and exhaust upgrade Primary lobes for H176-B 250 250 208 208 7.00mm 7.00mm 102 105 1.20mm 1.01mm 0.30mm 0.30mm Intermediate lobes for H176-B 254 250 214 208 8.60mm 7.00mm 102 105 1.55mm 1.01mm 0.30mm 0.30mm H176-C Racing camshafts for modified street / strip 294 286 264 256 11.80mm 11.30mm 102 104 4.70mm 3.86mm 0.30mm 0.30mm or time attack applications Primary lobes for H176-C 250 250 208 208 7.00mm 7.00mm 102 105 1.20mm 1.01mm 0.30mm 0.30mm Intermediate lobes for H176-C 254 250 214 208 8.60mm 7.00mm 102 105 1.55mm 1.01mm 0.30mm 0.30mm H176-T Special design camshafts for turbocharged 284 274 254 246 11.25mm 11.00mm 108 115 3.07mm 1.84mm 0.30mm 0.30mm H series engines in the 600-1000HP range Primary lobes for H176-T 250 250 208 208 7.00mm 7.00mm 102 105 1.20mm 1.01mm 0.30mm 0.30mm Intermediate lobes for H176-T 254 250 214 208 8.60mm 7.00mm 102 105 1.55mm 1.01mm 0.30mm 0.30mm H176-X Custom mechanical cams for Honda H22A VTEC engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Honda H22A VTEC

H176 H-176 Part No Description B C T T KVS08 Kelford’s Pacaloy dual valve spring set featuring nanopeen and gold nitride surface finish treatments to create the very • • • • best spring available for your H22A

16 Honda K20A & K24A i-VTEC

Kelford camshafts for the mega popular Honda K series engines feature the best design technology in the industry. With a focus on customer results Kelford have engineered camshafts to meet power expectations while retaining reliability of timing components and valve springs.

Duration Duration @ 0.1mm @ 1mm Suggested Valve Lift Valve Clearance Part No Application Valve Lift Valve Lift Nett Valve Lift Centrelines @ TDC Hot @ Valve In Ex In Ex In Ex In Ex In Ex In Ex

179-A Stage 1 racing cams to suit 2.0L and 2.4L 302 292 260 250 12.20mm 11.00mm Variable 105 Variable 2.90mm 0.30mm 0.30mm builds for many applications. Great power gains in the whole range over the TSX cams Primary lobes for 179-A 263 260 202 206 7.55mm 7.55mm Variable 105 Variable 0.93mm 0.30mm 0.30mm Intermediate lobes for 179-A 269 210 8.30mm 0.30mm 0.30mm 179-B Stage 2 racing cams to suit well modified 306 298 264 254 13.30mm 12.00mm Variable 104 Variable 3.08mm 0.30mm 0.30mm 2.0L and 2.4L engines for street / strip and track racing Primary lobes for 179-B 269 260 210 206 8.3mm 7.55mm Variable 105 Variable 0.93mm 0.30mm 0.30mm Intermediate lobes for 179-B 274 220 9.0mm 0.30mm 0.30mm 179-B2 K20-24 racing cams.Designed for track 310 298 268 254 13.50mm 12.00mm Variable 102 Variable 3.58mm 0.30mm 0.30mm racing applications. Large low lobes require idle tuning by tps. Super strong midrange power, rough idle on plenum manifolds

Primary lobes for 179-B2 280 280 226 220 11.00mm 9.80mm Variable 104 Variable 1.55mm 0.30mm 0.30mm Intermediate lobes for 179-B2 284 230 11.00mm 0.30mm 0.30mm

179-C Racing cams to suit professionally built, 316 308 274 266 14.50mm 12.80mm Variable 102 Variable 4.20mm 0.30mm 0.30mm large displacement K series drag race engines and alcohol injected Midget car racing engines

Primary lobes for 179-C 286 274 237 228 11.35mm 9.85mm Variable 104 Variable 1.55mm 0.30mm 0.30mm Intermediate lobes for 179-C 292 242 12.00mm 0.30mm 0.30mm 179-S1 K20A2 camshaft set specifically designed for 292 298 254 254 12.00mm 11.20mm Variable 112 Variable 2.08mm 0.30mm 0.30mm engines fitted with a supercharger Primary lobes for 179-S1 263 270 202 210 7.55mm 8.30mm Variable 115 Variable 0.46mm 0.30mm 0.30mm Intermediate lobes for 179-S1 269 210 8.30mm 0.30mm 0.30mm 179-T1 Stage 1 turbo cams, reduced overlap, turbo 292 288 254 248 12.00mm 11.20mm Variable 113 Variable 1.85mm 0.30mm 0.30mm specific designs for increased driveability and power Primary lobes for 179-T1 269 260 210 206 8.3mm 7.55mm Variable 110 Variable 0.80mm 0.30mm 0.30mm Intermediate lobes for 179-T1 274 220 9.0mm 0.30mm 0.30mm 179-X Custom cams for Honda K20 i-VTEC mechanical engines. We can manufacture cams to your specifications or design a profile for your specific application. Tool steel camshafts available on request.

Matching Components for Honda K20A & K24A i-VTEC

179

Part No Description A B B2 C S1 T1 KVS79-K Honda K20/24 beehive valve spring and retainer kit • • • • • •

17 Jaguar 3.8-4.2 6 Cylinder

Advertised Duration @ Valve Suggested Valve Lift Valve Part No Application Duration .050" Valve Lift Lift Centrelines @ TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex 178-A High torque road cam 278 278 228 228 .393" .393" 106 110 .088" .064" .008" .008" 178-B Mild road performance, D type profile 286 286 235 235 .376" .376" 106 110 .103" .085" .008" .008" 178-C Club race / rally cam 293 293 245 245 .405" .405" 105 107 .127" .122" .008" .008" 178-D Club race / rally cam for well built engines 304 304 239 239 .430" .430" 104 108 .125" .104" .010" .010" 178-E Race cam for seriously modified engines 292 304 246 239 .455" .430" 103 108 .147" .104" .008" .010" 178-F Race cam for seriously modified engines 325 325 259 259 .476" .476" 103 108 .164" .139" .010" .010" 178-X Custom mechanical cam for Jaguar 3.8-4.2 6 cylinder engines. We can manufacture cams to your specifications or design a profile for your specific application.

Mazda Miata 323 B6 Naturally Aspirated

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC In Ex In Ex In Ex In Ex In Ex 203-A Hot street cam to suit stock engine with stock ECU 256 250 216 210 8.60mm 8.60mm 110 110 0.85mm 0.68mm 203-B Stage 2 performance camshaft set to suit mild engine builds 264 256 222 216 9.00mm 9.00mm 108 110 1.32mm 0.80mm 203-C 272 degree high performance camshafts to suit mild race and 272 264 230 222 10.00mm 9.00mm 106 108 2.10mm 1.32mm rally car engines. Requires programable ECU 203-D Stage 3 racing camshafts to suit well modified B6 engines 280 272 238 230 10.25mm 10.00mm 104 106 2.90mm 1.95mm 203-X Custom cams for Mazda Miata B6 naturally aspirated engines. We can manufacture cams to your specifications or design a profile for your specific application. Solid lifter cams available on request.

Matching Components for Mazda B6 Camshafts

203

Part No Description A B C D KVS12 High performance valve spring set, drop in on stock retainers • • • •

18 Mazda Miata 323 B6 T Turbo Charged

Advertised Duration @ Part No Application Duration 1mm Valve Lift Valve Lift Centrelines Lift @ TDC In Ex In Ex In Ex In Ex In Ex T203-A Fast street cams to suit stock turbo and stock ECU 250 256 210 216 8.70mm 8.50mm 110 112 0.80mm 0.56mm T203-B High performance camshafts to suit hot street or rally 264 264 222 222 8.95mm 8.95mm 110 112 1.10mm 0.96mm applications. Requires KVS12 valve springs T203-C Top end performance race cam set to suit well modified 272 272 230 230 10.00mm 9.00mm 108 114 1.84mm 1.10mm engines T203-D Drag race cam for well modified engines with large turbo 280 280 238 238 10.25mm 10.25mm 106 115 2.10mm 1.03mm T203-X Custom cams for Mazda Miata B6 turbo engines. We can manufacture cams to your specifications or design a profile for your specific application. Solid lifter cams available on request.

All of the B6 camshafts listed here are for use with hydraulic lifters. Please contact us if you require solid lifter camshafts. Matching Components for Mazda B6

T203

Part No Description A B C D KVS12 High performance valve spring set, drop in on stock retainers • • • •

Mazda BP-BPT Hydraulic Lifter

The Kelford range of Mazda BP camshafts suit 1989-1997 engines that were originally manufactured with hydraulic lifters. Solid lifter camshaft profiles are available on request.

Advertised Duration Duration @ 0.1mm @ 1mm Part No Application Valve Lift Valve Lift Valve Lift Centrelines Lift @ TDC In Ex In Ex In Ex In Ex In Ex 235-A Mild performance camshafts. Stage 1 upgrade for near stock 264 250 220 210 8.95mm 8.60mm 108 110 1.47mm 0.66mm engines 235-B Mid level performance cam for slightly modified engines, requires 272 264 230 220 10.00mm 8.95mm 106 106 2.28mm 1.67mm ECU upgrade and KVS12 valve springs 235-C Racing camshafts for modified NA engines, suits IR manifolds, 280 272 238 230 10.20mm 10.00mm 104 104 3.00mm 2.54mm high compression and programable ECU 235-TA Stage 1TURBO cams. Suits mild turbo applications 250-350HP. 256 264 216 222 9.00mm 8.95mm 110 112 1.11mm 1.16mm Requires KVS12 valve springs 235-TB Racing camshafts to suit highly modified, high horsepower, 272 272 230 230 10.00mm 10.00mm 108 114 1.81mm 1.37mm Turbocharged BP1800 engines 235-HX Custom specification camshafts, made to order to your specs (for hydraulic lifters). 235-SX Custom specification camshafts, made to order to your specs (for solid lifters).

Matching Components for MAZDA BP-BPT Hydraulic Lifter 235 Part No Description A B C TA TB KVS12 High performance Pacaloy valve spring set to suit OEM retainers • • • • •

19 Mazda MZR LF-L3 2.0-2.3L

Kelford Cams range of mild performance camshafts to suit Mazda MZR engines. These suit the LF and L3 only. We do not have camshafts for the direct injection engines at this stage. For more radical builds, please contact us to discuss your requirements.

Duration Advertised @ 1mm Valve Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Clearances In Ex In Ex In Ex In Ex In Ex In Ex OEM OEM specification for reference only 256 238 207 190 9.15mm 7.80mm Vari 110 Vari 0.10mm 0.30mm 0.35mm 211-B Stage 1 performance camshafts for near stock 260 242 221 210 9.80mm 8.50mm Vari 108 Vari 0.73mm 0.25mm 0.30mm engines. Suits with OEM valve spring 211-T Stage 1 camshafts for turbocharged MZR engines 264 264 224 224 9.80mm 9.80mm Vari 116 Vari 0.66mm 0.25mm 0.30mm (non DISI). Suits OEM valve spring if using 1bar boost or less T203-X Custom cams for Mazda MZR engines. We can manufacture cams to your specifications or design a profile for your specific application.

BMW Mini (Tritec) 200-2006

Kelford Cams range for the 200-2006 BMW Mini (Tritec) engine feature lobe profiles that can run safely on the OEM valve spring. Different specifications are available on request.

Duration Advertised @ 1mm Valve Lift Part No Application Duration Valve Lift @ Rocker Ratio Valve Lift at TDC Centrelines In Ex In Ex In Ex In Ex In Ex 241-A Mini Cooper S camshaft upgrade for super charged engines 264 266 216 220 9.6mm 8.5mm 1.02mm 0.76mm 108 114 241-B Mini Cooper camshaft upgrade for naturally aspirated engines 272 266 226 216 10.5mm 8.5mm 1.57mm 1.01mm 106 108 241-X Custom cams for the Mini Cooper. We can also manufacture turbo cams to your specifications or design a profile for your specific application.

20 Mitsubishi 4G63 VR4 Evo 1-3

Kelford Cams world famous TX range of camshafts for Mitsubishi 4G63 DOHC engines. All camshaft profiles listed below are for use with hydraulic lifters. Solid cam profiles are available by special request.

Duration Advertised @ 1mm Valve Lift @ 1.73:1 Suggested Part No Application Duration Valve Lift Rocker Ratio Centerlines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex 1-TX272-L 272 degree high performance camshafts designed for use on 272 272 226 226 10.00mm 10.00mm 107 115 1.83mm 1.12mm the stock valve spring 1-TX258 Fast street engines with stock or small turbocharger, or 258 264 208 220 10.50mm 10.50mm 107 111 0.81mm 0.96mm restrictor plate rally engines up to 8000 RPM and 25lb boost with our recommended valve spring 1-TX264 The ultimate cam for street, strip and track engines from 264 260 216 216 11.00mm 10.35mm 107 113 1.10mm 0.70mm 300-500HP running up to 25lb boost and 8000 RPM with our recommended valve spring 1-TX268 264/268 degree high performance camshafts for mid range 264 268 216 220 11.00mm 10.50mm 107 113 1.10mm 0.84mm performance engines 350-550HP using E85 or similar blend fuels 1-TX272 The best all round performance cam to suit 400-600HP 272 272 226 226 11.00mm 11.00mm 107 113 1.52mm 1.00mm racing engines running up to 35lb boost & 8500 RPM with our valve spring 1-TX276HL High lift track racing camshafts to suit engines running up to 276 272 234 230 12.50mm 12.00mm 106 115 1.98mm 1.03mm 30lb boost and 9000 RPM with our recommended valve spring 1-TX278 272/278 degree high performance camshafts for street / strip 272 278 226 230 11.00mm 11.00mm 107 115 1.52mm 1.00mm and track racing engines using E85 or similar blend fuels 1-TX280 High HP racing cams, suits well built racing engines up to 35lb 280 276 238 230 11.50mm 11.00mm 107 115 2.09mm 1.00mm boost and 9000 RPM with our recommended valve spring 1-TX280R High HP racing cams, suits well built time attack and drag 280 288 238 242 11.50mm 11.50mm 107 116 2.09mm 1.29mm racing engines using E85 1-TX284HL High lift drag racing camshafts to suit engines running up to 284 280 242 238 12.50mm 12.00mm 106 116 2.36mm 1.21mm 30lb boost and 9500 RPM with our recommended valve spring 1-TX288 Drag racing camshafts to suit high horsepower professionally 288 280 242 238 12.00mm 11.50mm 105 117 2.40mm 1.32mm built drag racing engines up to 50lb boost and 9500 RPM with our recommended valve spring 1-TX294 Drag racing camshafts to suit extreme boost high RPM engines 294 300 250 256 12.00mm 12.00mm 110 118 2.39mm 1.88mm that use ethanol / methanol and or nitrous 1-177-X Custom mechanical or hydraulic cam for Mitsubishi 4G63 VR4 & Evolution 1-3 engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Mitsubishi 4G63 VR4 Evo 1-3

1-TX

Part No Description 272-L 258 264 268 272 278 280 280R 288 294 276HL 284HL 294HL KVS63 Single parallel valve spring set that drops in on the stock retainer. This spring suits our cams up to 8000 RPM and • • • • • • 25lb of boost KVS63-BTK Beehive valve spring & titanium retainer kit to suit our camshafts. If you use higher RPM or boost than we list, please contact us to discuss the correct parts choice for • • • • • • • • • • your engine KCG63 4G63 DOHC adjustable cam gears (pair) • • • • • • • • • • • • •

21 Mitsubishi 4G63 DOHC Evo 4-7

Kelford Cams world famous TX range of camshafts for Mitsubishi 4G63 DOHC engines. All camshaft profiles listed below are for use with hydraulic lifters. Solid cam profiles are available by special request.

Duration Advertised @ 1mm Valve Lift @ 1.73:1 Part No Application Duration Valve Lift Rocker Ratio Centerlines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex 4-TX272L 272 degree high performance camshafts designed for use on 272 272 226 226 10.00mm 10.00mm 107 115 1.83mm 1.12mm the stock valve spring 4-TX258 Fast street engines with stock or small turbocharger, or 258 264 208 220 10.50mm 10.50mm 107 111 0.81mm 0.96mm restrictor plate rally engines up to 8000 RPM and 25lb boost with our recommended valve spring 4-TX264 The ultimate cam for street, strip and track engines from 264 260 216 216 11.00mm 10.35mm 107 113 1.10mm 0.70mm 300-500HP running up to 25lb boost and 8000 RPM with our recommended valve spring 4-TX268 264/268 degree high performance camshafts for mid range 264 268 216 220 11.00mm 10.50mm 107 113 1.10mm 0.84mm performance engines 350-550HP using E85 or similar blend fuels 4-TX272 The best all round performance cam to suit 400-600HP 272 272 226 226 11.00mm 11.00mm 107 113 1.52mm 1.00mm racing engines running up to 35lb boost & 8500 RPM with our valve spring 4-TX276HL High lift track racing camshafts to suit engines running up to 276 272 234 230 12.50mm 12.00mm 106 115 1.98mm 1.03mm 30lb boost and 9000 RPM with our recommended valve spring 4-TX278 272/278 degree high performance camshafts for street / strip 272 278 226 230 11.00mm 11.00mm 107 115 1.52mm 1.00mm and track racing engines using E85 or similar blend fuels 4-TX280 High HP racing cams, suits well built racing engines up to 35lb 280 276 238 230 11.50mm 11.00mm 107 115 2.09mm 1.00mm boost and 9000 RPM with our recommended valve spring 4-TX280R High HP racing cams, suits well built time attack and drag 280 288 238 242 11.50mm 11.50mm 107 116 2.09mm 1.29mm racing engines using E85 4-TX284HL High lift drag racing camshafts to suit engines running up to 284 280 242 238 12.50mm 12.00mm 106 116 2.36mm 1.21mm 30lb boost and 9500 RPM with our recommended valve spring 4-TX288 Drag racing camshafts to suit high horsepower professionally 288 280 242 238 12.00mm 11.50mm 105 117 2.40mm 1.32mm built drag racing engines up to 50lb boost and 9500 RPM with our recommended valve spring 4-TX294 Drag racing camshafts to suit extreme boost high RPM engines 294 300 250 256 12.00mm 12.00mm 110 118 2.39mm 1.88mm that use Ethanol / Methanol and or nitrous 4-177-X Custom mechanical or hydraulic cam for Mitsubishi 4G63 Evolution 4-7 engines. We can manufacture cams to your specifications or design a profile for your specific application.

The only difference between Evo 8 and Evo 4-7 cams is the diameter of the bolt hole in the back of the exhaust cam. For Evo 4-7 it is 8mm, for Evo 8 it is 12mm.

Matching Components for Mitsubishi 4G63 DOHC Evo 4-7

4-TX Part No Description 272L 258 264 268 272 278 280 280R 288 294 276HL284HL294HL KVS63 Single parallel valve spring set that drops in on the stock retainer. Suits our cams up to 8000 RPM and 25lb • • • • • • of boost KVS63-BTK Beehive valve spring & titanium retainer kit to suit our camshafts. If you use higher RPM or boost than we list, • • • • • • • • • • please contact us KCG63 4G63 DOHC adjustable cam gears (pair) • • • • • • • • • • • • •

22 Mitsubishi 4G63 DOHC Evo 8

Kelford Cams world famous TX range of camshafts for Mitsubishi 4G63 DOHC engines. All camshaft profiles listed below are for use with hydraulic lifters. Solid cam profiles are available by special request.

Duration Advertised @ 1mm Valve Lift @ 1.73:1 Part No Application Duration Valve Lift Rocker Ratio Centerlines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex 8-TX272-L 272 degree high performance camshafts designed for use on 272 272 226 226 10.00mm 10.00mm 107 115 1.83mm 1.12mm the stock valve spring 8-TX258 Fast street engines with stock or small turbocharger, or 258 264 208 220 10.50mm 10.50mm 107 111 0.81mm 0.96mm restrictor plate rally engines up to 8000 RPM and 35lb boost with our recommended valve spring 8-TX264 The ultimate cam for street, strip and track engines from 264 260 216 216 11.00mm 10.35mm 107 113 1.10mm 0.70mm 300-500HP running up to 35lb boost and 8000 RPM with our recommended valve spring 8-TX268 264/268 degree high performance camshafts for mid range 264 268 216 220 11.00mm 10.50mm 107 113 1.10mm 0.84mm performance engines 350-550HP using E85 or similar blend fuels 8-TX272 Best all round performance cam to suit 400-600HP racing 272 272 226 226 11.00mm 11.00mm 107 113 1.52mm 1.00mm engines running up to 35lb boost & 8500 RPM with our valve spring 8-TX276HL High lift track racing camshafts to suit engines running up to 276 272 234 230 12.5mm 12.00mm 106 115 1.98mm 1.03mm 30lb boost and 9000 RPM with our recommended valve spring 8-TX278 272/278 degree high performance camshafts for street / strip 272 278 226 230 11.00mm 11.00mm 107 115 1.52mm 1.00mm and track racing engines using E85 or similar blend fuels 8-TX280 High HP racing cams, suits well built racing engines up to 35lb 280 276 238 230 11.50mm 11.00mm 107 115 2.09mm 1.00mm boost and 9000 RPM with our recommended valve spring 8-TX280R High HP racing cams, suits well built Time attack and Drag 280 288 238 242 11.50mm 11.50mm 107 116 2.09mm 1.29mm racing engines using E85 8-TX284HL High lift drag racing camshafts to suit engines running up to 284 280 242 238 12.50mm 12.00mm 106 116 2.36mm 1.21mm 30lb boost and 9500 RPM with our recommended valve spring 8-TX288 Drag racing camshafts to suit high horsepower engines on 288 280 242 238 12.00mm 11.50mm 105 117 2.40mm 1.13mm C16 or similar up to 50lb boost and 9500 RPM with our recommended valve spring 8-TX294 Drag racing camshafts to suit extreme boost high RPM engines 294 300 250 256 12.00mm 12.00mm 110 118 2.39mm 1.88mm that use ethanol / methanol and or nitrous 8-177-X Custom mechanical or hydraulic cam for Mitsubishi 4G63 Evolution 8 engines. We can manufacture cams to your specifications or design a profile for your specific application.

The only difference between Evo 8 and Evo 4-7 cams is the diameter of the bolt hole in the back of the exhaust cam. For Evo 4-7 it is 8mm, for Evo 8 it is 12mm.

Matching Components for Mitsubishi 4G63DOHC EVO 8

8-TX

Part No Description 272-L 258 264 268 272 278 280 280R 288 294 276HL 284HL 294HL KVS63-BK Beehive valve spring set for use with the stock retainer. If you use higher RPM or boost than we list, please contact us to • • • • • • discuss the correct parts choice for your engine KVS63-BTK Beehive valve spring & titanium retainer kit to suit our camshafts. If you use higher RPM or boost than we list, • • • • • • • • • • please contact us to discuss

KCG63 4G63 DOHC adjustable cam gears (pair) • • • • • • • • • • • • •

23 Mitsubishi Evo 9 MIVEC

Kelford Cams world famous TX range of camshafts for Mitsubishi 4G63 MIVEC engines. All camshaft profiles listed below are for use with hydraulic lifters. Solid cam profiles are available by special request.

Duration Advertised @ 1mm Valve Lift @ 1.73:1 Valve Lift Part No Application Duration Valve Lift Rocker Ratio Centrelines @ TDC In Ex In Ex In Ex In Ex In Ex 9-TX272L 272 degree high performance camshafts designed for use 272 272 226 226 10.00mm 10.00mm 130/100 115 0.14mm 1.12mm on the stock valve spring 9-TX258 Fast street engines with stock or small turbocharger, or 258 264 208 220 10.50mm 10.50mm 130/100 111 0.05mm 0.96mm restrictor plate rally engines up to 8000 RPM and 35lb boost with our recommended valve spring. 9-TX264 The ultimate cam for street, strip and track engines from 264 260 216 216 11.00mm 10.35mm 130/100 113 0.12mm 0.70mm 300-500HP running up to 35lb boost and 8000 RPM with our recommended valve spring 9-TX268 264/268 degree high performance camshafts for mid range 264 268 216 220 11.00mm 10.50mm 130/100 113 0.12mm 0.84mm performance engines 350-550HP using E85 or similar blend fuels 9-TX272 The best all round performance cam to suit 400-600HP 272 272 226 226 11.00mm 11.00mm 130/100 113 0.23mm 1.00mm racing engines running up to 35lb boost & 8500 RPM with our valve spring 9-TX278 272/278 degree high performance camshafts for street / strip 272 278 226 230 11.00mm 11.00mm 130/100 115 0.23mm 1.00mm and track racing engines using E85 or similar blend fuels 9-TX280 High HP racing cams, suits well built racing engines up 280 276 238 230 11.50mm 11.00mm 130/100 115 0.37mm 1.00mm to 35lb boost and 9000 RPM with our recommended valve spring 9-TX280R High HP racing cams, suits well built time attack and drag 280 288 238 242 11.50mm 11.50mm 134/104 116 2.09 1.29mm racing engines using E85 9-TX288 Drag racing camshafts to suit high horsepower 288 280 242 238 12.00mm 11.50mm 134/104 117 0.48mm 1.32mm professionally built drag racing engines up to 50lb boost and 9500 RPM with our recommended valve spring 9-177-X Custom mechanical or hydraulic cam for Mitsubishi 4G63 Evolution 9 MIVEC engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Mitsubishi Evo 9 MIVEC - Hydraulic Lifter

9-TX Part No Description 272L 258 264 264A 272 272A 280 280R 288 KVS63-BK Beehive valve spring set for use with the stock retainer and our camshafts. If you use higher RPM or boost than we list, please contact us to discuss the correct parts choice • • • • • • for your engine KVS63-BTK Beehive valve spring & titanium retainer kit to suit our camshafts. If you use higher RPM or boost than we list, please contact us to discuss the correct parts choice for • • • • • • your engine

24 Mitsubishi 4B11-T Evo X

Continuously variable intake and exhaust valve timing allows tuners to achieve great power gains and driveability from the 4B11-T. This will be a popular engine for motorsport applications for quite some time. The benefits gained from installing Kelford Cams in 4B11-T engines are already widely recognised, and as with the 4G63 platform, Kelford will continue product innovation.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Valve Clearances In Ex In Ex In Ex In Ex In Ex 214-R 4B11T camshafts to suit 36mm restricted rally motors. 260 262 214 220 10.00mm 10.00mm Variable Variable 0.25mm 0.35mm Featuring our 'split' lobe design for superior efficiency. 254 210 9.75mm Requires the use of our KVS11 valve spring set 214-A Stage 1 high performance camshafts that can run with 264 252 226 212 10.00mm 9.30mm Variable Variable 0.30mm 0.35mm the stock valve spring at stock RPM limit, or use our spring to run up to 32lb boost and 9000 RPM 214-B Stage 2 high performance camshafts. Suits 270 262 228 220 11.00mm 10.00mm Variable Variable 0.30mm 0.35mm 450-650HP engine builds. Suits up to 32lb boost and 9000 RPM with Kelford valve spring 214-C Stage 3 racing camshafts to suit high horsepower engine 278 272 236 230 11.50mm 11.00mm Variable Variable 0.30mm 0.35mm builds. Suits up to 32lb boost and 9000 RPM with Kelford valve spring 214-X Custom camshafts for Mitsubishi 4B11-T Evolution X engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Mitsubishi 4B11-T Evo X

214 Part No Description R A B C KVS11 Single ‘drop in’ spring set specifically designed by us to work with our camshafts in 4B11-T engines at the stock installed height • • • •

25 Mitsubishi 4G93 Naturally Aspirated

Kelford’s range of racing camshafts for Mitsubishi 4G93 DOHC naturally aspirated engines features ultra modern lobe designs for the very best performance.

Duration Advertised @ 1mm Suggested Part No Application Duration Valve Lift Valve Lift Centrelines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex 212-A Stage 1 high performance cams to suit 4G93 stock engine. 260 260 212 212 10.00mm 9.58mm 108 111 0.84mm 0.65mm Requires ECU re-tune 212-B Stage 2 performance camshafts to suit mild tuned performance 270 260 224 215 10.00mm 10.00mm 108 111 1.34mm 0.76mm road motors. Requires ECU re-tune 212-C Racing camshafts to suit well modified engines. 286 274 242 234 10.50mm 10.00mm 102 105 2.67mm 1.85mm 212-D Racing cams to suit well built high compression engines with 296 288 252 242 11.50mm 10.50mm 102 102 3.18mm 2.67mm individual runner, good headers etc. For track use only 212-X Custom cams for Mitsubishi 4G93 N/A engines. We can manufacture cams to your specifications or design a profile for your specific application.

Mitsubishi 4G93-T Turbocharged

Kelford’s range of racing camshafts for Mitsubishi 4G93-T DOHC Turbo charged engines features ultra modern lobe designs for the very best performance.

Duration Advertised @ 1mm Suggested Part No Application Duration Valve Lift Valve Lift Centrelines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex T212-A Stage 1 high performance cams to suit 4G93T 260 260 212 212 10.00mm 9.58mm 108 111 0.84mm 0.65mm 16 Valve DOHC T212-B Stage 2 high performance cams to suit 4G93T 270 260 224 215 10.00mm 10.00mm 108 111 1.34mm 0.76mm 16 Valve DOHC T212-X Custom cam for Mitsubishi 4G93T & GSR 1800 engines. We can manufacture cams to your specifications or design a profile for your specific application.

26 Nissan Datsun L14-L20 (OHC) 4 Cylinder

The Nissan L series 4 cylinder engine remains popular for those restoring Datsun Sunny and 510 classic race cars. Kelford Cams have been modifying camshafts for these engines since the early 1970’s. The list of camshafts below represent what has worked well over the last 40 years.

Duration Duration @ 0.1mm @ 1mm Suggested Lash Part No Application Valve Lift Valve Lift Valve Lift Centrelines Valve Lift @ TDC (Set at the Cam) In Ex In Ex In Ex In Ex In Ex In Ex 185-A Stage 1 upgrade to suit near stock 270 270 236 236 11.80mm 11.80mm 107 111 2.20mm 1.93mm 0.20mm 0.20mm engines 185-B Mild performance cam to suit fast road 280 280 245 245 11.80mm 11.80mm 104 108 2.59mm 2.46mm 0.15mm 0.15mm cars on side draught carbs. Can also run on the stock carb but is rough at idle 185-C Midrange performance cam to suit well 296 296 256 256 11.60mm 11.60mm 102 104 3.76mm 3.50mm 0.15mm 0.20mm built motors on 45mm side draught carbs or I/R fuel injection. Ideal all round performance for club level rally or track racing 185-D Top end performance camshaft to suit 304 304 263 263 14.43mm 14.43mm 100 102 4.72mm 4.58mm 0.20mm 0.20mm professionally built L series racing engines. (not suitable for road cars) 185-T High performance camshaft made on 264 264 232 232 10.90mm 10.90mm 108 116 1.93mm 1.00mm 0.20mm 0.20mm wider lobe separation to reduce overlap for Turbocharged applications 185-X Custom specification L14-L20 camshaft. Made to your figures or especially designed for your application.

Matching Components for Nissan Datsun L14-L20 (OHC) 4 Cylinder

185 Part No Description A B C D T KVS4200 Nissan L series (4 cylinder) dual valve spring set to suit OEM retainers • • • • •

27 Nissan Datsun L20-L28 (OHC) 6 Cylinder

The Nissan L series 6 cylinder engine, remains popular for those restoring Datsun 240z and 260z classic race cars. Kelford Cams have been modify camshafts for these engines since the early 1970’s. The list of camshafts below represent what has worked well over the last 40 years.

Duration Duration @ 0.1mm @ 1mm Suggested Lash Part No Application Valve Lift Valve Lift Valve Lift Centrelines Valve Lift @ TDC (Set at the Cam) In Ex In Ex In Ex In Ex In Ex In Ex 222-A Stage 1 upgrade to suit near stock 270 270 236 236 11.80mm 11.80mm 107 111 2.20mm 1.93mm 0.20mm 0.20mm engines 222-B Mild performance cam to suit fast road 280 280 245 245 11.80mm 11.80mm 104 108 2.59mm 2.46mm 0.15mm 0.15mm cars on side draught carbs. Can also run on the stock carbs but is rough at idle 222-C Midrange performance cam to suit well 296 296 256 256 11.60mm 11.60mm 102 104 3.76mm 3.50mm 0.15mm 0.20mm built motors on 45mm side draught carbs or I/R fuel injection. Ideal all round performance for club level rally or track racing 222-D Top end performance camshaft to suit 304 304 263 263 14.43mm 14.43mm 100 102 4.72mm 4.58mm 0.20mm 0.20mm professionally built L series racing engines. (Not suitable for road cars) 222-T High performance camshaft made on 264 264 232 232 10.90mm 10.90mm 108 116 1.93mm 1.00mm 0.20mm 0.20mm wider lobe separation to reduce overlap for turbocharged applications 222-X Custom specification L20-L28 camshaft. Made to your figures or especially designed for your application.

Matching Components for Nissan Datsun L20-L28 (OHC) 6 Cylinder

222 Part No Description A B C D T KVS4206 Nissan L series (6 cylinder) dual valve spring set to suit OEM retainers • • • • •

28 Nissan VK56

Kelford Cams range for Nissan VK56 engines feature modern design principles to achieve the ultimate performance while maintaining proper control of the valve-train and camshaft drive chain systems. From mild upgrades to twin turbocharged high horsepower applications, Kelford have the camshafts and valve springs to suit your needs.

Nissan Camshafts: VK56 Naturally Aspirated

Duration Duration @ 1mm Part No Application @ 0.30mm Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex STOCK For reference only 232 230 195 195 8.80mm 8.80mm 113 113 0.3mm 0.35mm 237-A Mild enhancment for near stock engines, 266 258 226 218 10.80mm 10.00mm 108 110 1.60mm 1.20mm 0.25mm 0.30mm requires ECU re-tune and KVS56 valve 258 218 10.00mm springs 237-B Racing camshafts to suit slightly modified 288 278 248 236 11.55mm 11.00mm 106 110 3.35mm 2.13mm 0.25mm 0.30mm VK56-DE engines, good torque and 278 240 11.05mm midrange power 237-C Racing camshafts to suit high compression 300 288 260 248 12.55mm 11.50mm 101 106 5.33mm 3.33mm 0.25mm 0.30mm well modified VK56-DE racing engine, for 290 250 11.55mm midrange and top end power 237-X Custom camshafts for Nissan VK56 engines. We can manufacture cams to your specifications or design a profile for your specific application.

Nissan Camshafts: VK56 Turbocharged

Duration Duration @ 1mm Part No Application @ 0.30mm Valve lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 237-T1 VK56 Stage 1 turbo cams, suits engines 272 266 230 226 10.80mm 10.80mm 113 115 1.35mm 0.66mm 0.25mm 0.30mm designed to run in the 550-750HP range. 266 226 9.95mm Requires KVS56-BT valve springs 237-T2 VK56 camshafts to suit single or twin 282 280 240 240 11.50mm 10.90mm 114 117 1.73mm 1.27mm 0.25mm 0.30mm turbo street / strip or marine applications, 274 234 11.05mm requires KVS56-BT valve springs 237-T3 VK56 camshafts to suit well built twin 294 294 252 252 11.95mm 11.95mm 114 120 2.14mm 1.47mm 0.25mm 0.30mm turbo drag racing engine, suits E85+, 288 248 11.50mm requires KVS56-BT valve springs

Matching Components for Nissan VK56

237 Part No Description A B C T1 T2 T3 KVS56 Nissan VK56 high performance spring for use with stock retainer • • KVS56-BT Nissan VK56 beehive valve spring and titanium retainer set • • • •

29 Nissan SR20-DET S13 Turbo Charged

The Kelford Cams range of street and race track proven camshafts for SR20DET (non NVCS) engines give our customers the benefit of more power and extended parts life. Many drift battles are won using Kelford’s cams.

Duration Duration @ 0.1mm @ 1mm Valve Lift @ 1.55:1 Part No Application Valve Lift Valve Lift Rocker Ratio Centrelines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex 188-A Street performance cams to suit small turbo upgrade. High lift low 260 266 218 222 11.80mm 11.00mm 108 112 1.12mm 0.92mm duration for great low end and midrange power. Required KVS93 valve springs 188-A2 High performance 'drop in' cams to suit stock valve springs. Requires 266 270 224 228 11.00mm 11.00mm 108 114 1.47mm 0.96mm ECU re-tune 188-B Ultimate drift spec SR20-DET cams, maximum lobe area and low 268 272 226 230 12.00mm 11.50mm 108 112 1.52mm 1.28mm duration for fast spool and lots of top end power. Requires KVS93 or KVS93-BT valve springs if using over 2 bar boost 188-C 280 degree racing cams to suit street / strip engines with a large turbo. 280 280 236 236 12.50mm 12.00mm 108 115 2.09mm 1.28mm Requires KVS93 or KVS93-BT valve springs if using over 2 bar boost

188-D 284/290 degree drag racing cams to suit large turbo, high boost SR20 284 290 240 246 12.50mm 12.00mm 110 118 2.06mm 1.47mm motors using E85 or Methanol. Requires KVS93-BT valve springs. 188-X Custom hydraulic cams for Nissan SR20DET S13 Turbo engines. We can manufacture cams to your specifications or design a profile for your specific application.

Nissan SR20-DET with NVCS Turbo Charged

The Kelford Cams range of race proven camshafts for SR20DET engines with NVCS feature low seat to seat duration and high lift for fast spool and the ultimate performance for drift, track and street / strip applications.

Duration Duration @ 0.1mm @ 1mm Valve Lift @ 1.55:1 Part No Application Valve Lift Valve Lift Rocker Ratio Centrelines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex V-188-A Street performance cams to suit small turbo upgrade. High lift low 260 266 218 222 11.80mm 11.00mm 130 112 0.06mm 0.92mm duration for great low end and midrange power. Requires KVS93 valve springs V-188-A2 High performance 'drop in' cams to suit stock valve springs. Requires 266 270 224 228 11.00mm 11.00mm 132 114 0.02mm 0.96mm ECU re-tune V-188-B Ultimate drift spec SR20-DET cams, maximum lobe area and low 268 272 226 230 12.00mm 11.50mm 132 115 0.05mm 1.06mm duration for fast spool and lots of top end power. Requires KVS93 or KVS93-BT valve springs if using over 2 bar boost V-188-C 280 Degree racing cams to suit street / strip engines with a large turbo. 280 280 236 236 12.50mm 12.00mm 134 115 0.08mm 1.28mm Requires KVS93 or KVS93-BT valve springs if using over 2 bar boost V-188-X Custom hydraulic cams for Nissan SR20DET NVCS engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Nissan SR20-DET

188 V-188 Part No Description A A2 B C A A2 B C KCG20 Nissan SR20 adjustable cam gear set. For NVCS engines only one gear is required (for the exhaust side) • • • • • • • • KVS93 Nissan SR20 single valve springs to suit stock retainers. Suitable for engines using our cams up to 8000 RPM and 28lb of boost. For higher boost and or RPM applications use the KVS93-BTK • • • • • • KVS93-BT Kelford design, Pacaloy beehive valve spring and titanium retainer set. For racers that expect the best quality and ultimate performance, these are the very best protection for your engine • • • • • • • •

30 Nissan SR20-DET GTi-R RNN14 Solid Lifter

The GTi-R was developed as a WRC homologation engine. It has quad throttle bodies and solid lifter cams. It makes a great competition engine and is used in many high HP racing applications. The Kelford range of camshafts for this engine has been well proven on circuits and drag strips around the world.

Duration Duration @ 1mm Valve Lift @ 1.55 Part No Application @ Lash Valve Lift Rocker Ratio Centrelines Valve Lift @ TDC Valve Clearances

In Ex In Ex In Ex In Ex In Ex In Ex 186-A Wild GTi-R street performance cam, suits 270 270 232 232 11.78mm 11.70mm 108 116 1.80mm 0.95mm 0.15mm 0.20mm turbo and ECU upgrade 186-B GTi-R racing camshaft, mid range and top 272 276 232 238 12.10mm 11.70mm 108 117 1.85mm 1.09mm 0.15mm 0.20mm end power 186-C Racing cams to suit well built competition 284 290 242 248 12.50mm 12.10mm 110 118 2.17mm 1.62mm 0.15mm 0.20mm engines above 600HP 186-D Ultimate drag race cams for high RPM high 294 300 250 256 12.50mm 12.10mm 110 122 2.57mm 1.54mm 0.15mm 0.20mm boost methanol engines 186-X Custom mechanical cams for Nissan GTi-R RNN14 Turbo engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Nissan SR20-DET GTi-R RNN14

186 Part No Description A B C D KCG20 Nissan SR20 adjustable cam gears • • • • KVS22 These dual valve springs fit the stock retainer and are ideal for use with our cams up to 9800 RPM and 30lb of boost. If you use more boost and/or RPM than this, please contact us to discuss the correct parts choice for your engine • • • •

31 Nissan SR16VE/SR20VE

The Kelford Cams range of high performance camshafts for Nissan SR-VE engines has been designed and refined through extensive research and development. Custom cams to your specification and VVL Eliminator cams are also available on request.

Duration Duration @ 1mm Part No Application @ 0.10mm Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 184-B Nissan N1 324 300 255 252 12.00mm 11.90mm 104 109 3.45mm 2.33mm 0.20mm 0.40mm Primary lobe specification for 184-B (N1) 244 248 190 193 8.40mm 8.00mm 100 104 0.58mm 0.16mm 0.20mm 0.40mm 184-D Nissan N1 main lobe with 20V spec side 324 300 255 252 12.00mm 11.90mm 102 104 3.70mm 2.80mm 0.20mm 0.40mm lobes Primary lobe specification for 184-D 252 248 210 204 10.20mm 8.30mm 102 104 1.42mm .91mm 0.20mm 0.40mm 184-C High performance camshafts to suit highly 314 312 266 262 12.50mm 11.80mm 104 100 4.24mm 3.70mm 0.20mm 0.40mm modified street motors Primary lobe specification for 184-C 252 248 210 204 10.20mm 8.30mm 102 104 1.42mm .91mm 0.20mm 0.40mm

184-C4 Camshaft set to suit track racing and drag 314 312 266 262 12.50mm 11.80mm 101 98 4.67mm 3.94mm 0.20mm 0.40mm racing cars. Large duration low lobes to enhance midrange transition onto the high lobes Primary lobe specification for 184-C4 260 252 228 214 10.20mm 10.20mm 102 104 1.90mm 1.83mm 0.20mm 0.40mm 184-E Racing cams to suit large capacity, individual 318 312 274 262 13.00mm 11.80mm 101 98 5.05mm 3.94mm 0.20mm 0.40mm runner drag or track racing engines. Ideal in a light car with close gears. Not for street cars Primary lobe specification for 184-E 260 252 228 214 10.20mm 10.20mm 102 104 1.90mm 1.83mm 0.20mm 0.40mm 184-ST Nissan SR20VE camshafts for turbocharged 290 290 246 246 10.60mm 10.60mm 108 116 2.10mm 1.42mm 0.20mm 0.40mm street, track or drift engines Primary lobe specification for 184-ST 252 248 210 204 10.20mm 8.30mm 102 104 1.42mm .91mm 0.20mm 0.40mm 184-T Nissan SR20VE camshafts for high HP 292 303 250 256 11.4mm 11.4mm 108 116 2.79mm 1.74mm 0.20mm 0.27mm turbocharged engines. Suits 800+HP builds on methanol or E85 Primary lobe specification for 184-T 260 260 228 228 10.20mm 10.15mm 104 114 1.95mm 1.00mm 0.20mm 0.23mm 184-X Custom cams for Nissan SR16 & 20 VE engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for SR16VE/SR20VE

184 Part No Description B D C C4 ST T KVS10 High performance Pacaloy dual valve spring set to suit stock retainers • • • • KVS10-BT Ovate wire beehive valve spring and titanium retainer set. The ultimate valve spring package available for SR-VE engines • • • • • • KCG20 Nissan SR adjustable cam gears (pair) • • • • • •

32 Nissan KA24 DE/DET

The Kelford range of camshafts for Nissan KA24 caters for mild to wild turbo charged applications. Naturally aspirated camshaft grinds and custom specifications are available on request.

Duration Duration @ 0.3mm @ 1mm Part No Application Cam Lift Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 213-A Stage 1 turbo or N/A 'drop in' camshaft set 260 260 222 222 9.38mm 9.38mm 110 112 1.20mm 1.00mm 0.20mm 0.20mm 213-B Stage 2 turbo camshaft set, suits engines 272 272 232 232 9.80mm 9.80mm 110 116 1.70mm 1.02mm 0.25mm 0.25mm over 400wHP 213-C Stage 3 turbo camshaft set, cylinder head 278 278 236 236 11.00mm 11.00mm 110 116 1.83mm 1.20mm 0.25mm 0.25mm requires clearancing for cams to rotate 213-X Custom mechanical cam for Nissan KA24 & KA24DET engines. We can manufacture cams to your specifications or design a profile for your specific application.

Kelford KA24 camshafts suit front and rear wheel drive cars. For RWD the rear of the camshaft needs slight machining.

33 Nissan VR38DETT GTR R35

Kelford Cams is proud to release our NEW range of cams to suit Nissan VR38DETT engines which have already featured in world record breaking GT-R’s. After extensive testing and refinement we have developed camshafts to cater for engines ranging from stock to well built competition monsters. Of course if you have a special build we can design and manufacture a set of custom cams specifically for your application.

Duration Duration @ 1mm Part No Application @ 0.30mm Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 231-A Nissan GTR R35 Stage 1 cams to suit stock 266 266 226 226 10.00mm 9.25mm 126 115 0.13mm 0.78mm 0.30mm 0.33mm engines. Can use OEM valve springs if boost and rev limit are kept original 231-B Nissan GTR R35 Stage 2 cams to give great 272 272 232 232 10.00mm 9.25mm 126 115 0.16mm 1.14mm 0.30mm 0.33mm midrange and top end power gains 231-B2 R35 Stage 2 high lift cams street driven 274 274 233 233 10.60mm 10.55mm 130 115 0.21mm 1.17mm 0.25mm 0.30mm and motorsport applications. Superior performance and timing chain system reliability when used with our valve springs 231-C Nissan GTR R35 Stage 3 cams to suit well 276 276 236 236 11.25mm 11.22mm 130 115 0.43mm 1.28mm 0.30mm 0.33mm built engines for street/strip or track racing 231-D R35 drag racing camshafts to suit E85 fuel 284 290 240 244 10.60mm 10.57mm 130 118 0.38mm 1.37mm 0.30mm 0.33mm high boost applications. Requires the use of our KVS38 valve spring set 231-E R35 cams for methanol burning Pro drag 292 306 246 260 11.00mm 11.00mm 130 118 0.51mm 2.08mm 0.30mm 0.33mm racing motors, 6 second 2000+ HP type builds 231-S6 R35 split lobe design, to promote swirl and 274 274 232 232 10.60mm 10.55mm 126 115 0.38mm 1.17mm 0.25mm 0.30mm maximise efficiency 266 226 10.55mm 128 231-X Custom mechanical cams for Nissan VR38 turbo engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Nissan VR38DETT GTR R35

231 Part No Description A B B2 C D S6 KVS38 Single valve spring set to suit Nissan VR38DETT engines using our camshafts • • • • • •

34 Nissan RB20DE/T & RB25 DE/T R31 & R32 - Hydraulic Lifter

The Kelford range of camshafts for Nissan RB20 and RB25 engines has come from many years of racing RB engines down here in New Zealand. The HL series are popular because there is no head clearancing required, but the more serious engine builder uses the higher lift profiles. Our cams do not work with NVCS.

Duration Duration @ 0.1mm @ 1mm Part No Application Valve Lift Valve Lift Valve Lift Centrelines Valve Lift @ TDC In Ex In Ex In Ex In Ex In Ex HL182-A Drift spec, low duration, low overlap, maximum velocity, for 262 262 222 222 9.30mm 9.30mm 108 114 1.37mm .85mm ultimate throttle response. No cylinder head clearancing needed HL182-B RB20/25DE-T 272 degree street / strip cams, no cylinder head 272 272 226 226 9.35mm 9.35mm 110 114 1.19mm .85mm clearancing needed HL182-C RB20/25DE-T hydraulic 280 degree racing camshafts, no cylinder 280 280 234 234 9.35mm 9.35mm 110 114 1.59mm 1.20mm head clearancing needed H182-C High lift racing camshafts, low seat duration, maximum velocity to 264 272 226 232 10.00mm 10.00mm 110 114 1.31mm 1.2mm suit street, drift & track applications, requires machining for lobes to clear head casting H182-D High lift street / strip racing camshafts, suit large turbo, built 272 278 232 238 10.00mm 10.00mm 112 116 1.41mm 1.31mm engine, requires machining for lobes to clear head casting H182-X Custom hydraulic cams for Nissan RB20-25 DE&DET engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Nissan RB20DE/T & RB25 DE/T

HL182 H182 Part No Description A B C C D KCG25 Nissan RB adjustable cam gears • • • • • KVS20 Drop in valve spring to suit RB20 and Gen1 RB25 cylinder heads (non NVCS). It suits our camshafts and up to 30 lb boost and 8000 RPM • • • • • KVS25-R This single spring, retainer & base kit suits series 2 RB25 heads that are originally equipped with short intake and long exhaust springs. For use with Kelford cams up to 30 lb boost and 8000 RPM. If you use more boost and/or RPM than • • • • • this please contact us to discuss the correct parts choice for your engine

Nissan ‘RB’ camshafts have a drive fitted to the front of the exhaust camshaft. All of our camshafts are fitted with RB drive type 1 as pictured below. If you have a later model engine with drive type 2, please let us know this when you place your order and we will fit that type instead.

Type 1 Type 2

35 Nissan RB26-DETT R32/R33 - Solid Lifter

The Kelford range feature low, mid and high lift lobe designs. Low lift for direct fitment without head casting clearance required. Mid lift and high lift for more serious motorsport applications.

Duration Duration @ 1mm Part No Application @ 0.35mm Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex L182-A 264 degree street performance 264 264 226 226 8.95mm 8.90mm 110 114 1.27mm 0.87mm 0.25mm 0.30mm camshafts, no cylinder head clearancing needed L182-B 272 degree street / strip camshafts, 272 272 234 234 8.95mm 8.90mm 110 114 1.60mm 1.20mm 0.25mm 0.30mm no cylinder head clearancing needed L182-C 280 degree street / strip camshafts, 280 280 242 242 8.95mm 8.90mm 110 116 1.96mm 1.33mm 0.25mm 0.30mm no cylinder head clearancing needed 182-C 272 degree performance camshafts to 272 272 234 234 10.00mm 9.95mm 110 116 1.73mm 1.05mm 0.25mm 0.30mm suit applications where low end power and fast spool up is important 182-S 270-274 degree RB26 high 274 274 236 236 10.55mm 10.50m 110 116 1.88mm 1.18mm 0.25mm 0.30mm performance camshafts. Suits many 270 230 10.50mm 112 motorsport applications, especially good with E85 182-E Street, strip or circuit racing camshafts for 280 280 242 242 10.55mm 10.50mm 112 120 1.95mm 1.05mm 0.25mm 0.30mm well built engines. Great in 3.0L engines 182-F Serious racing camshafts. These cams 288 288 248 248 11.10mm 11.05mm 112 120 2.29mm 1.33mm 0.25mm 0.30mm require custom shims because of the reduced base circle 182-SG 292 degree drag racing camshafts. 292 300 254 260 11.10mm 11.10mm 111 120 2.66mm 1.93mm 0.25mm 0.30mm Suits high boost alcohol engines. 288 248 11.10mm 113 182-X Custom mechanical cams for Nissan RB26DETT R32 & R33 engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Nissan RB26-DETT

L182 182 Part No Description A B C C S E F SG KVS15 High Performance single valve springs, ‘drop in’ fit on OEM retainers. For use with Kelford Cams and up to 30 lb boost • • • • • • KVS1855-BT Nissan RB26-DETT Pacaloy beehive spring and titanium retainer set. Kelford designed specifically for RB26 engines. Nitrided nanopeened springs and high grade titanium retainers make these the very best spring set in the world for RB26 engines. Installed pressure of 47.7kg (105lb) at 39.1mm • • • • • • • • (1.539") coil bind at 26.5mm (1.043") KCG25 Nissan RB adjustable cam gears (pair) • • • • • • • •

Nissan ‘RB’ camshafts have a drive fitted to the front of the exhaust camshaft. All of our camshafts are fitted with RB drive type 1 as pictured below. If you have a later model engine with drive type 2, please let us know this when you place your order and we will fit that type instead.

Type 1 Type 2

36 Nissan RB30

The single over head cam Nissan RB30 engine was made from 1985- 1991 and originally for the Nissan Skyline and Patrol. Holden bought the rights to use the engine for the very popular VL Commodore. This Kelford Cams range has been used with great success in many hot street, track racing and drag racing engines.

Nissan RB30 Naturally Aspirated

Duration Advertised @ 1mm Part No Duration Valve Lift Valve Lift 1.6:1 Lift @ TDC Centrelines Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex OEM specification for reference only 242 242 208 208 10.00mm 10.00mm 0.56mm 0.51mm 110 111 HYD HYD 226-A Stage 1 cam to suit stock engine, stock ECU 260 260 223 223 10.90mm 10.90mm 1.40mm 1.00mm 108 112 HYD HYD and stock springs 226-B Stage 2 camshaft to suit slightly modified 270 270 233 233 11.30mm 11.30mm 2.08mm 1.42mm 106 112 HYD HYD engine. Requires ECU re-tune 226-CS Solid lifter racing camshaft to suit street / strip 290 292 247 253 12.20mm 12.20mm 2.97mm 2.87mm 106 110 .040mm .045mm or track day car 226-DS Solid lifter racing camshaft to suit well 304 314 264 267 13.70mm 13.85mm 3.76mm 3.50mm 104 110 .040mm .040mm modified, high RPM street / strip or track day car

Nissan RB30 Turbocharged

Duration Advertised @ 1mm Part No Duration Valve Lift Valve Lift 1.6:1 Lift @ TDC Centrelines Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 226-E Stage 1 cam to suit mild turbocharged 260 260 222 222 10.90mm 10.90mm 1.09mm 0.70mm 112 114 HYD HYD RB30 street performance applications 226-F Stage 2 cam to suit street / strip 274 274 240 240 12.95mm 12.95mm 2.05mm 1.37mm 110 116 HYD HYD applications. Suits 350-500HP turbo range. Good midrange performance 226-G Stage 3 cam to suit well modified street 284 292 250 256 13.70mm 13.70mm 2.69mm 2.13mm 110 118 HYD HYD / strip engine. Great choice for motors using E85 226-HS Solid lifter cams to suit various high 296 304 260 264 13.70mm 13.70mm 2.69mm 2.15mm 112 118 .040mm .040mm RPM racing applications. Suits well built competition engine with large turbo 226-IS Top end horsepower cams to suit high 304 314 264 267 13.70mm 13.85mm 2.81mm 2.51mm 112 118 .040mm .040mm RPM drag racing applications. Suits well built competition engine with large turbo, high stall, nitrous etc 226-X Custom cam for Nissan RB30 engines. We can manufacture a cam to your specifications or design a profile for your specific application.

37 Nissan VQ35 GEN1 (350Z)

To suit the first generation of VQ35-DE engines that have variable intake cam timing only.

Nissan VQ35 GEN1 (350Z) Naturally Aspirated

Duration Duration @ 1mm Part No Application @ 0.30mm Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 189-A Nissan 350Z Stage 1 cam to suit mild NA 266 260 222 216 10.75mm 10.35mm 125 116 0.15mm 0.29mm 0.25mm 0.30mm engine builds, for fast street performance 189-B Nissan 350Z Stage 2 cam to suit strong 282 272 240 232 11.50mm 11.00mm 125 112 0.60mm 1.39mm 0.25mm 0.30mm NA engine builds, ideal spec for fast street performance and time attack competition 189-C Nissan 350Z Stage 3 cam to suit ultimate 302 292 256 250 11.50mm 11.00mm 125 110 1.31mm 2.62mm 0.25mm 0.30mm fully modified NA engine builds, high compression, Cosworth manifold or individual runner system, for racing only 189-X Custom mechanical cams for Nissan VQ35 Generation 1 naturally aspirated engines. We can manufacture cams to your specifications or design a profile for your specific application.

Nissan VQ35 GEN1 (350Z) Turbo Charged

Duration Duration @ 1mm Part No Application @ 0.30mm Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex T-189-A Turbocharged Nissan 350Z Stage 1 cam suit 266 260 222 216 10.75mm 10.35mm 125 116 0.15mm 0.29mm 0.25mm 0.30mm fast street turbo performance T-189-B Turbocharged Nissan 350Z Stage 2 cam to 272 272 232 232 11.00mm 11.00mm 125 116 0.35mm 0.98mm 0.25mm 0.30mm suit super lap or wild street performance T-189-C Turbocharged Nissan 350Z Stage 3 cam 288 288 246 246 11.50mm 11.50mm 125 120 0.78mm 1.20mm 0.25mm 0.30mm to suit fully built competition racing engine builds T-189-X Custom camshafts for Nissan VQ35 Generation 1 turbo engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Nissan VQ35 GEN1 (350Z)

189 T-189 Part No Description A B C A B C KVS35 Nissan VQ35 ‘drop in’ high performance spring for use with stock retainer and base up to 8000 RPM • • • • • • KVS35-BT Nissan VQ35 beehive spring and titanium retainer set for the ultimate performance and reliability • • • •

38 Nissan VQ35-DE GEN2 (350Z Rev Up)

To suit the second generation of VQ35-DET engines that have variable intake and exhaust cam timing.

Nissan VQ35-DE GEN2 (350Z Rev Up) Naturally Aspirated

Duration Duration @ 1mm Part No Application @ 0.30mm Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 2-189-A Nissan 350Z Rev Up Stage 1 cam to 266 260 222 216 10.75mm 10.35mm 125 125 0.15mm 0.07mm 0.25mm 0.30mm suit mild NA engine builds for fast street performance 2-189-B Nissan 350Z Rev Up Stage 2 cam to suit 282 272 240 232 11.50mm 11.00mm 125 125 0.60mm 0.31mm 0.25mm 0.30mm strong NA engine builds, ideal spec for ultimate NA street performance or time attack 2-189-C Nissan 350Z Rev Up Stage 3 cam to suit 302 292 256 250 11.50mm 11.00mm 125 125 1.31mm 0.98mm 0.25mm 0.30mm ultimate fully modified NA engine builds, high comp, Cosworth manifold or individual runner system, racing use only 2-189-X Custom mechanical cams for Nissan VQ35 Generation 2 naturally aspirated engines. We can manufacture cams to your specifications or design a profile for your specific application.

Nissan VQ35-DE GEN2 (350Z Rev Up) Turbo Charged

Duration Duration @ 1mm Part No Application @ 0.30mm Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex T2-189-A Turbocharged, Rev Up Nissan 350Z Stage 1 266 260 222 216 10.75mm 10.35mm 125 125 0.15mm 0.07mm 0.25mm 0.30mm suits mild engine builds for fast street turbo performance T2-189-B Turbocharged, Rev Up Nissan 350Z Stage 2 272 272 232 232 11.00mm 11.00mm 125 125 0.35mm 0.32mm 0.25mm 0.30mm to suit super lap or wild street performance T2-189-C Turbocharged, Rev Up Nissan 350Z Stage 3 288 288 246 246 11.50mm 11.50mm 125 125 0.78mm 0.73mm 0.25mm 0.30mm to suit fully built competition race engines T2-189-X Custom camshafts for Nissan VQ35 Generation 2 turbo engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Nissan VQ35-DE (350Z Rev Up)

2-189 T2-189 Part No Description A B C A B C KVS35 Nissan VQ35 ‘drop in’ high performance spring for use with stock retainer and base up to 8000 RPM • • • • • • KVS35-BT Nissan VQ35 beehive spring and titanium retainer set for the ultimate performance and reliability • • • •

39 Nissan TB48 DOHC 24 Valve

Kelford Cams’ range of camshafts for Nissan TB48 DOHC engines have proven to be popular for street and sand racing applications in the U.A.E. These cams have been designed and refined through careful research and development with racers and tuners.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Lift @ TDC Centrelines Valve Clearances

In Ex In Ex In Ex In Ex In Ex In Ex 223-A Stage 1 performance camshaft set to suit 264 264 225 225 9.60mm 9.55mm VVT 1.24mm 126/104 110 0.25mm 0.30mm near stock TB48 engines 223-C Stage 2 camshafts to suit mid range 286 286 244 244 10.80mm 10.75mm VVT 2.26mm 126/104 110 0.25mm .30mm performance engines with limited modifications. For street and offroad applications 223-D Stage 3 camshafts to suit highly modified 308 294 264 256 12.10mm 11.80mm VVT 3.65mm 126/104 106 0.25mm 0.25mm naturally aspirated stroker engines with high compression, ported heads and improved intake manifold etc 223-T Stage 1 turbo cams for road and off road 264 264 225 225 9.60mm 9.55mm VVT 1.24mm 132/110 116 0.25mm 0.30mm racing applications

223-T1 Camshafts specifically designed to suit high HP 278 278 240 240 9.95mm 9.95mm VVT 1.42mm 132/110 115 0.25mm 0.30mm turbocharged TB48 competition engines

223-T2 Pro drag racing camshafts to suit high boost 292 302 252 260 10.80mm 10.80mm 2.44mm 1.96mm 112 120 0.25mm 0.25mm high HP alcohol motors. For use without VVT. Requires adjustable gears 223-X Custom cams for Nissan TB48. We can manufacture cams to suit your specifications or design a profile for your specific application.

Matching Components for Nissan TB48 DOHC 24 Valve

223 Part No Description A C D T T1 T2 KVS04 Single 'drop in' valve springs to suit stock retainer. For use with our camshafts in naturally aspirated Nissan TB48 DOHC engines and turbocharged engines up to 28lb boost and 7000 RPM • • • • • •

If you intend to use more boost and/or RPM than we list above email us your build details and we can advise you the correct parts to use

40 Sea Doo (1503 Rotax Engine) Jet Ski

Kelford Cams are proud to announce their new range of cams for high performance Sea Doo (1503 Rotax engine) jet ski applications. These camshafts are made from high quality specialist tool steel and feature lobe designs that offer fantastic power gains and complete valve train stability.

Duration Advertised @ 1mm Valve Lift @ 1.72:1 Valve Lift Part No Application Duration Valve Lift Rocker Ratio @ TDC Centrelines In Ex In Ex In Ex In Ex In Ex 232-A Stage 1 high performance camshaft upgrade for a stock 276 282 230 236 10.30mm 10.30mm 1.39mm 1.14mm 110 116 engine. Great power gains all the way to the limiter. Can use stock valve springs

232-B Stage 2 high performance camshaft to suit engines with 282 290 236 240 11.00mm 11.00mm 1.70mm 1.30mm 110 116 larger supercharger. Suits up to 18lb boost - 9000 RPM with matching Kelford valve spring kit 232-X Custom cams for Sea Doo (1503 Rotax Engine) Jet Ski. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Sea Doo (1503 Rotax Engine) Jet Ski

232 Part No Description A B KVS03 High performance valve spring set with titanium retainers • •

41 Subaru EJ20 STi 1995-1998 (Version 3-4)

The Kelford range of popular camshafts for the Version 3 and 4 Subaru WRX STi engines cater for all forms of motorsport. We believe that Kelford Cams make the best high performance Subaru camshafts available. All of these cams are manufactured in-house using ultra modern design systems and ground using masterless CNC grinders with CBN cutting wheel technology for superior quality and consistency.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 198-A Fast street,high torque cams to suit stock 256 260 218 222 9.35mm 9.35mm 110 112 0.91mm 0.92mm 0.20mm 0.25mm engines. Ideal in 36 mm restrictor classes. 252 212 9.35mm 113 0.47mm Suits up to 35 lb boost and 7000 RPM with our recommended valve spring 198-B Our most popular cam for engines in the 268 264 226 222 10.30mm 10.0mm 110 112 1.36mm 0.92mm 0.20mm 0.25mm 300-500HP range. Suits up to 35 lb boost 264 222 10.0mm 112 0.91mm and 7500 RPM with our recommended valve spring 198-C 272 Street/strip or circuit race cams, 274 274 232 232 10.60mm 10.60mm 110 114 1.68mm 1.01mm 0.20mm 0.25mm suits larger turbo, larger volume intake 270 228 10.60mm 112 1.22mm manifold, and well built engines. Suits up to 35 lb boost and 8000 RPM with our recommended valve spring 198-D 282 degree drag racing camshafts. Suits E85 282 282 240 240 11.05mm 11.00mm 110 118 0.20mm 0.25mm motors using high boost and high RPM 278 236 11.05mm 112 198-X Custom cams for Subaru WRX Version 3-4 engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Subaru EJ20 STi 1995-1998 (Version 3-4)

199

Part No Description A B CB D KVS96 beehive valve spring and chrome moly retainer set to suit engines using cam buckets with the shim on top or for shimless buckets. • • • • KVS97 beehive valve spring set to suit engines with the tappet shim under the cam bucket. To fit these springs the OEM retainer needs a slight modification. • • • •

If you intend to use more than 8000 RPM and/or 35lb boost, please contact us to discuss the correct parts choice for your individual application.

42 Subaru EJ20 WRX STi NON AVCS (Version 5+)

This range of Kelford Camshafts suits the Version 5-6 engines that do not have AVCS. We list camshafts to suit the stock bucket with shim on top and also some higher lift versions that suit engines with shim under or ‘shimless’ buckets. The cams for shimless buckets cannot be used on the conventional shim on top system. High performance camshafts for Subaru EJ engines are our second most popular product and they are found in race engines all over the world.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 199-B High torque camshafts to suit near stock 256 264 218 222 9.35mm 9.35mm 110 112 0.91mm 0.92mm 0.20mm 0.25mm engines. Ideal in 36mm restrictor classes 252 212 9.35mm 113 0.47mm 199-C 264 degree camshafts to suit street strip 268 264 226 222 10.30mm 10.0mm 110 112 1.36mm 0.92mm 0.20mm 0.25mm and track applications, requires ECU and 264 222 10.00mm 112 0.91mm turbo upgrade 199-E 272 degree high performance camshafts to 274 274 232 232 10.60mm 10.60mm 110 113 1.68mm 1.32mm 0.20mm 0.25mm suit most motorsport applications. Suits well 270 228 10.60mm 112 1.22mm built engines on E85 199-J Race and rally camshafts. High lift, 264 260 225 222 10.70mm 10.20mm 110 113 1.28mm 0.83mm 0.20mm 0.25mm low duration design for great throttle 260 222 10.20mm 112 0.92mm response. Must have shimless buckets and aftermarket ECU 199-K High lift 272 degree racing camshafts. 272 272 232 232 11.30mm 11.30mm 110 113 1.66mm 1.34mm 0.20mm 0.25mm Requires cylinder head modification to fit. 268 228 10.50mm 112 1.22mm Suits well built competition motors. Good on E85 fuel. Must have shimless buckets and aftermarket ECU 199-L High lift 282 degree racing duration 282 282 240 240 11.50mm 11.50mm 110 116 2.10mm 1.55mm 0.20mm 0.25mm racing camshafts, Requires cylinder head 278 236 11.00mm 112 1.64mm modification to fit. Suits well built motors with larger intake manifolds. Good on E85 fuel. Must have shimless buckets and aftermarket ECU 199-X Custom cams for Subaru EJ20 Version 5+ Non AVCS engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Subaru EJ20 WRX STi NON AVCS (Version 5+)

199 Part No Description B C D E J K L KVS109-STi This single spring is suitable for these cams in engines up to 30lb of boost and 8000 RPM. If you use very high boost and/or RPM please email us to discuss the correct parts choices for • • • • your application KVS1847-BT Kelford Racing, ovate wire beehive style valve spring set with high grade titanium retainers. Specifically designed for the unique requirments of the flat four Subaru engine. Featuring Kobe wire, • • • • • • • nanopeening and gold nitriding, this is the very best valve spring set that money can buy.

43 Subaru EJ20 WRX STi (Version 7-10)

This range of Kelford high performance camshafts is to suit Version 7-10 EJ20 STi engines with Subaru’s awesome AVCS (Active Valve Control System). These cams feature high velocity lobes that have a wider ‘sweep’ across the cam bucket, therefore these camshafts can only be used on shimless buckets or buckets that have the shim underneath.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex V2-199-A High torque camshafts to suit near stock 256 260 218 222 9.55mm 9.50mm 130 113 0.00mm 0.83mm 0.20mm 0.25mm engines. Ideal in 36 mm restrictor classes 252 212 9.55mm V2-199-B Race and rally camshafts. High lift, 264 260 225 222 10.70mm 10.20mm 130 113 0.03mm 0.83mm 0.20mm 0.25mm low duration design for great throttle 260 222 10.20mm response. Must have shimless buckets and aftermarket ECU V2-199-C High lift 272 degree racing camshafts. 272 272 232 232 11.30mm 11.30mm 130 113 0.12mm 1.34mm 0.20mm 0.25mm Requires cylinder head modification to fit. 268 228 10.50mm Suits well built competition motors. Good on E85 fuel. Must have shimless buckets and aftermarket ECU V2-199-D High lift 282 degree racing duration 282 282 240 240 11.50mm 11.50mm 130 113 0.25mm 1.55mm 0.20mm 0.25mm racing camshafts, Requires cylinder head 278 236 11.00mm modification to fit. Suits well built motors with larger intake manifolds. Good on E85 fuel. Must have shimless buckets and aftermarket ECU V2-199-X Custom cams for Subaru EJ20 Version 7-10 JDM spec engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Subaru EJ20 WRX STi (Version 7-10)

V2-199 Part No Description A B C D KVS109-STi This single spring is suitable for these cams in engines up to 30lb of boost and 8000 RPM. If you use very high boost and/or RPM please email us to discuss the correct parts choices for your application • • • KVS1847-BT Kelford Racing, ovate wire beehive style valve spring set with high grade titanium retainers. Specifically designed for the unique requirments of the flat four Subaru engine. Featuring Kobe wire, nanopeening and gold nitriding, this is the very best • • • valve spring set that money can buy

These camshafts have AVCS (variable cam timing) on the intake side only and are identified by triggers at the rear of the intake cams consisting of four raised ‘choppers’ at 90 degrees apart.

Subaru EJ20 AVCS Intake Cam Trigger Identification

44 Subaru EJ25 WRX STi (2004 - Current)

This range of Kelford high performance camshafts is to suit Subaru EJ25 engine (2004 - current) equipped with Subaru’s awesome AVCS (Active Valve Control System) on the intake cams only.The cams are easily identified by the triggers on the rear of the intake cams which will be machined to have three ‘keyway / slot’ style triggers.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex R-199-A High torque camshafts to suit near stock 256 260 218 222 9.55mm 9.50mm 130 113 0.00mm 0.83mm 0.20mm 0.25mm engines. Ideal in 36 mm restrictor classes 252 212 9.55mm R-199-B Race and rally camshafts. High lift, 264 260 225 222 10.70mm 10.20mm 130 113 0.03mm 0.83mm 0.20mm 0.25mm low duration design for great throttle 260 222 10.20mm response. Must have shimless buckets and aftermarket ECU R-199-C High lift 272 degree racing camshafts. 272 272 232 232 11.30mm 11.30mm 130 113 0.12mm 1.34mm 0.20mm 0.25mm Requires cylinder head modification to fit. 268 228 10.50mm Suits well built competition motors. Good on E85 fuel. Must have shimless buckets and aftermarket ECU R-199-D High lift 282 degree racing duration 282 282 240 240 11.50mm 11.50mm 130 113 0.25mm 1.55mm 0.20mm 0.25mm racing camshafts, Requires cylinder head 278 236 11.00mm modification to fit. Suits well built motors with larger intake manifolds. Good on E85 fuel. Must have shimless buckets and aftermarket ECU R-199-X Custom cams for Subaru EJ25 STi 2005-current mechanical engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Subaru EJ25 WRX STi (2004-current)

R-199 Part No Description A B C D KVS109-STi This single spring is suitable for these cams in engines up to 30lb of boost and 8000 RPM. If you use very high boost and/or RPM please email us to discuss the correct parts choices for your application • • • KVS1847-BT Kelford Racing, ovate wire beehive style valve spring set with high grade titanium retainers. Specifically designed for the unique requirments of the flat four Subaru engine. Featuring Kobe wire, nanopeening and gold nitriding, this is the very • • • best valve spring set that money can buy

These camshafts have AVCS (variable cam timing) on the intake side only. The intake triggers consist of three slots at the rear of the camshaft.

Subaru EJ25 Intake Cam Trigger Identification

45 Subaru EJ257B WRX STi Dual AVCS 2008-Current

This range of Kelford Camshafts for the Subaru WRX STi EJ257B dual AVCS engine feature the same successful lobe designs used on the earlier engines. The dual AVCS on this engine simply gives another tool to the tuner so power and driveability is optimised through the entire operating range.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 220-A High torque camshafts to suit near stock 256 260 218 222 9.55mm 9.50mm 130 126 0.00mm 0.00mm 0.20mm 0.25mm engines. Ideal in 36 mm restrictor classes 252 212 9.55mm 220-B Race and Rally camshafts. High lift, 264 260 225 222 10.70mm 10.20mm 130 126 0.03mm 0.07mm 0.20mm 0.25mm low duration design for great throttle 260 222 10.20mm response. Must have shimless buckets and aftermarket ECU 220-C High lift 272 degree racing camshafts. 272 272 232 232 11.30mm 11.30mm 130 126 0.12mm 0.17mm 0.20mm 0.25mm Requires cylinder head modification to fit. 268 228 10.50mm Suits well built competition motors. Good on E85 fuel. Must have shimless buckets and aftermarket ECU 220-D High lift 282 degree racing duration 282 282 240 240 11.50mm 11.50mm 130 126 0.25mm 0.39mm 0.20mm 0.25mm racing camshafts, Requires cylinder head 278 236 11.00mm modification to fit. Suits well built motors with larger intake manifolds. Good on E85 fuel. Must have shimless buckets and aftermarket ECU 220-X Custom cams for Subaru EJ257B engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Subaru EJ257B WRX STi Dual AVCS 2008-Current

220 Part No Description A B C D KVS109-STi This single spring is suitable for these cams in engines up to 30lb of boost and 8000 RPM. If you use very high boost and/or RPM please email us to discuss the correct parts choices for your application • • • KVS1847-BT Kelford Racing, ovate wire beehive style valve spring set with high grade titanium retainers. Specifically designed for the unique requirements of the flat four Subaru engine. Featuring Kobe wire, nanopeening and gold nitriding, this is the very • • • best valve spring set that money can buy.

These camshafts have AVCS (variable cam timing) on the intake and exhaust side. The intake triggers consist of three slots. The exhaust triggers consist of a raised ring with two machined slots located just behind the front journal.

Subaru EJ257B Dual Subaru EJ257B Dual AVCS Intake Cam AVCS Exhaust Cam Trigger Identification Trigger Identification

46 Suzuki M15 - M16 DOHC

Kelford Cams range of high performance camshafts for the Suzuki M16 engine feature modern lobe designs with ‘maximum area’ for the ultimate performance in your Swift.

Duration Duration @ 0.1mm @ 1mm Suggested Part No Application Valve Lift Valve Lift Valve Lift Centrelines Valve Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 230-A Stage 1 camshafts for mildly tuned engines 250 236 208 198 8.47mm 7.96mm Stock 113 Variable 0.20mm 0.30mm 0.30mm VVTi 230-B Stage 2 camshafts to suit club race and rally 282 264 244 230 10.3mm 9.50mm 103 108 2.92mm 1.78mm 0.25mm 0.25mm applications. Use in fixed position (Non VVT) 230-C Race cams to suit well built engines. 12:1 291 275 251 239 10.55mm 9.90mm 102 102 3.53mm 2.87mm 0.30mm 0.30mm + comp, big bore, big valve head etc. Use in fixed position (Non VVT) 230-X Custom mechanical cams for the M16 DOHC. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Suzuki M15 - M16

230 Part No Description A B C KVS05 Kelford Racing, high performance valve spring and titanium retainer set • • •

47 Toyota 3S-GE/GTE Gen 2 (with the tappet shim on top of the cam bucket)

This range of camshafts suits the generation 2 Toyota 3S-GE and 3S-GTE engines, produced from 1990 to 1993. These engines have the tappet shim on top of the cam bucket. Kelford cams for these engines feature modern max area lobe design and are proven performers.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 2-195-A Ultimate street or club race cams 276 270 240 232 9.90mm 9.60mm 103 107 2.80mm 1.92mm 0.25mm 0.30mm 2-195-B Rally cams, good midrange power in 290 274 252 236 10.60mm 9.90mm 100 105 3.82mm 2.51mm 0.25mm 0.30mm mild engines 2-195-C Rally or circuit racing, ported head, 45mm 300 286 260 248 10.60mm 9.90mm 99 104 4.30mm 3.28mm 0.25mm 0.30mm throttles etc 2-195-D Super race cams, suit light car, high comp, 314 302 272 262 10.60mm 10.25mm 99 102 4.78mm 4.40mm 0.25mm 0.30mm big valves etc 2-195-TA 3S-GTE turbo cams for street performance 258 258 222 222 9.30mm 9.30mm 110 112 1.13mm 0.85mm 0.25mm 0.25mm engines with stock turbo 2-195-TB 3S-GTE turbo cams for serious street 270 270 232 232 9.60mm 9.60mm 108 116 1.80mm 0.95mm 0.25mm 0.30mm performance, turbo and ECU upgrade required 2-195-TC 3S-GTE turbo drag cams, high HP, top 278 278 240 240 9.90mm 9.90mm 105 115 2.58mm 1.47mm 0.25mm 0.30mm end RPM 2-195-X Custom cams for Toyota 3SGE Gen 2 shim over bucket engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Toyota 3S-GE/GTE Gen 2

2-195 Part No Description A B C D TA TB TC KVS109-3S The valve spring and base kit listed suits N/A engines and turbo charged engines using our cams, up to 8000 RPM and 25lb of boost. For applications with higher boost and/or RPM please contact us for • • • • • • • the correct parts recommendations

48 Toyota 3S-GE/GTE Gen 3 (with the tappet shim on top of the valve tip)

This range of camshafts suits the generation 3 Toyota 3S-GE and 3S-GTE engines, produced from 1994 to 1999. These engines have the tappet shim on top of the valve tip so can benefit from higher lift cam profiles compared to the Gen 2 engines. Contact us if you need something special for your application.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 3-195-A Rally cam, suits big valve head, high 284 276 248 240 10.50mm 10.20mm 103 105 3.45mm 2.70mm 0.25mm 0.30mm compression etc 3-195-B Race cam, suits professionally built 296 284 258 248 11.20mm 10.50mm 100 104 4.50mm 3.37mm 0.25mm 0.30mm competition engine 3-195-C All Motor drag race or lightweight race car 307 300 273 261 12.25mm 10.65mm 98 102 5.12mm 4.50mm 0.20mm 0.25mm cams, 12.5 / 1+ and close ratio gearbox 3-195-TA 3S-GTE turbo cams for serious street 262 262 224 224 10.50mm 10.00mm 110 114 1.22mm 0.78mm 0.25mm 0.30mm performance engines, suit 400HP turbo 3-195-TB 3S-GTE turbo cam for well built engines with 272 272 232 232 10.80mm 10.80mm 108 114 1.88mm 1.15mm 0.25mm 0.30mm 450-600HP turbo 3-195-TC 3S-GTE turbo cam for all out drag racing, 280 280 240 240 11.30mm 10.80mm 108 116 2.35mm 1.38mm 0.25mm 0.30mm high RPM, 700+ HP turbo 3-195-X Custom cams for Toyota 3SGE Gen 3 shim under bucket engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Toyota 3S-GE/GTE Gen 3

3-195 Part No Description A B C TA TB TC KVS109-3S The valve spring and base kit listed suits N/A engines and turbo charged engines using our cams, up to 8000 RPM and 25lb of boost. For applications with higher boost and/or RPM please contact us for the • • • • • • correct parts recommendations

49 Toyota 2AZ-FE Scion TC

Kelford Cams range of high performance camshafts for the Toyota 2AZ-FE engine feature modern lobe designs with ‘maximum area’ for the ultimate performance in your Scion TC.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances Ex In Ex In Ex In Ex In Ex In Ex 239-A Mild street performance camshaft to suit 264 260 218 216 9.35mm 8.75mm Variable 110 Vari 0.81mm 0.2mm 0.25mm stock valve springs 239-B 272 degree high performance camshafts 272 266 230 222 9.35mm 8.75mm Variable 110 Vari 1.10mm 0.2mm 0.25mm to suit stock valve springs 239-C Naturally aspirated race cams for street / 286 278 244 236 10.80mm 10.00mm Variable 106 Vari 2.29mm 0.2mm 0.25mm strip and track day applications 239-T 272 degree camshafts to suit 272 270 232 228 10.05mm 10.00mm Variable 114 Vari 1.01mm 0.2mm 0.25mm turbocharged 2AZ-FE racing engines 239-X Custom mechanical cams for Scion TC engines. We can manufacture cams to your specifications or design a profile for your specific application.

50 Toyota 4A-GE 16 Valve

The 193- camshafts below feature maximum area design and give the highest lift in the industry while working perfectly with the stock diameter shim.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 193-A Fast street cam, can run stock ECU 266 262 226 220 8.59mm 8.20mm 108 110 1.58mm 1.00mm 0.25mm 0.30mm 193-B Rally cam, great midrange power 284 278 244 236 9.20mm 8.50mm 104 106 2.70mm 2.06mm 0.25mm 0.30mm 193-C Race cams, suit high compression, ported 298 288 254 244 9.52mm 9.15mm 100 104 3.56mm 2.80mm 0.25mm 0.30mm head etc 193-D Full race cams, suit single seater or 314 308 272 266 10.00mm 9.35mm 99 104 4.47mm 3.63mm 0.25mm 0.30mm sports car 193-T Turbo cams, reduced overlap, suit street 262 266 220 226 8.25mm 8.25mm 108 116 1.19mm 0.73mm 0.25mm 0.30mm and race 193-X Custom cams for Toyota 4AGE 16V stock shim engines. We can manufacture cams to your specifications or design a profile for your specific application.

The 193HV camshafts below have a high velocity design and must use a shimless cam bucket or a ‘shim under bucket’ conversion. Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 193HV-A Rally cams, suit big valve head, high 290 282 248 240 10.30mm 10.10mm 99 105 3.60mm 2.53mm 0.25mm 0.30mm compression etc 193HV-B Race cams, suit professionally built 300 294 258 248 10.50mm 10.25mm 99 103 4.22mm 3.32mm 0.25mm 0.30mm competition engines 193HV-C All motor drag race or single seater circuit 318 304 272 262 11.00mm 10.10mm 98 103 5.08mm 3.68mm 0.25mm 0.30mm car cams 193HV-T Turbo cams for all out drag racing 284 268 240 226 10.15mm 8.75mm 108 118 2.23mm 0.72mm 0.25mm 0.30mm 193HV-X Custom cams for Toyota 4AGE 16V shim under bucket engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Toyota 4A-GE 16 Valve

193 193HV Part No Description A B C D T A B C T KVS101-16 Toyota 4AGE Pacaloy valve spring set • • • • • • • Email us for details about valve springs for turbocharged 4A-GE engines • •

51 Toyota 4A-GE 20 Valve

These feature new purpose built profiles that maximise lobe area on these small bucket engines. Some work with the VVT and others can either utilise the VVT or you can use adjustable gears if you wish to set fixed timing. These cams suit both the gen 4 silver top engines, produced from ‘91 to ‘95, and the gen 5 black top engines, produced from ‘95 to ‘98.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 194-A Stage 1 high performance cams for a fast 264 264 228 228 8.20mm 8.15mm 120 106 0.58mm 1.75mm 0.25mm 0.30mm street car with a stock engine 100 2.25mm 194-B Rally cams, great power gains across the 270 270 232 232 8.71mm 8.66mm 120 105 0.63mm 2.00mm 0.25mm 0.30mm entire rev range in mildly tuned engines 100 2.52mm 194-C Racing camshafts to suit slightly modified 284 278 248 242 9.30mm 8.50mm 120 105 1.29mm 2.52mm 0.25mm 0.30mm engines, can run VVT or use adjustable 100 3.02mm gears to set fixed timing 194-D Racing camshafts for well optimised 290 284 250 248 10.00mm 9.30mm 102 105 3.16mm 2.74mm 0.25mm 0.30mm engines. Great with 7A short block. Not for use with VVT 194-E Racing camshafts to suit high compression, 302 290 266 250 10.50mm 10.00mm 100 105 4.08mm 2.87mm 0.25mm 0.30mm high RPM professionally built competition engine for use in a light car. Great with 7A short block. Not for use with VVT 194-TA Specifically designed cams for turbocharged 264 264 228 228 8.20mm 8.20mm 111 113 1.30mm 1.10mm 0.25mm 0.30mm 4A-GE 20V engines, can use VVT or adjustable gears to set fixed timing 194-X Custom cams for Toyota 4AGE 20V engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Toyota 4A-GE 20 Valve

194 Part No Description A B C D E TA KVS51B Toyota 4AGE 20V valve spring set to work with our camshafts. These springs 'drop in' on stock retainers • • • • • •

52 Toyota 1FZ-FE 6 Cylinder DOHC

The Kelford range of cams for the Toyota 1FZ-FE 24-valve, 4.5L DOHC engine caters for everything from near stock engines right through to serious, high HP stroker engine builds. You will mostly find our 1FZ-FE camshafts and valve springs used in Toyota Land Cruisers, raced on and off road by our good friends in the U.A.E.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 225-A Stage 1 mild performance cams to suit a 264 264 225 225 9.70mm 9.65mm 107 107 1.52mm 1.48mm 0.25mm 0.30mm near stock engine 225-B Stage 2 cams to suit mildly modified engines 270 270 232 232 9.65mm 9.65mm 107 107 1.94mm 1.96mm 0.25mm 0.25mm 225-C Stage 3 cams for well modified 1FZ engines 284 284 246 246 10.60mm 10.55mm 104 107 3.09mm 2.68mm 0.25mm 0.30mm 225-T1 1FZ-FE turbo cams for high HP engine builds 276 284 238 246 10.35mm 10.55mm 110 115 1.91mm 1.77mm 0.25mm 0.30mm 225-X Custom cams for Toyota 1FZ-FE engines. We can manufacture cams to your specifications or design a profile for your specific application.

Matching Components for Toyota 1FZ-FE 6 Cylinder DOHC

225 Part No Description A B C T1 KVS04 Toyota 1FZ valve spring set to suit our N/A cams and our turbo cams up to 28lb boost and 7000 RPM • • • • For high HP turbocharged 1FZ engines please contact us to purchase the correct parts to suit your boost and RPM level •

53 Toyota Supra 1JZ-GTE

The camshaft selections below are designed to run with the stock cam bucket with shim on top. For engines that have shimless or shim under cam bucket valve train conversions, we have an endless range of profile designs available so please contact us to discuss your requirements.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 229-A High performance street cams for a near 248 248 210 210 8.70mm 8.70mm 109 119 0.68mm 0.06mm 0.25mm 0.25mm stock engine. Suits up to 30 lb boost and 7000 RPM with our recommended valve spring 229-B Street performance cams, turbo and 260 260 222 222 9.35mm 9.35mm 108 119 1.31mm 0.26mm 0.25mm 0.25mm computer upgrade. Suits up to 30 lb boost and 7500 RPM with our recommended valve spring 229-C 264/272 degree street, strip or track day 264 272 228 232 9.65mm 9.65mm 107 116 1.73mm 0.94mm 0.25mm 0.25mm camshafts, good response and midrange power. Suits up to 30 lb boost and 8000 RPM with our recommended valve spring 229-D 272/278 degree racing camshafts. These 272 278 236 240 9.95mm 9.95mm 110 120 1.83mm 0.94mm 0.25mm 0.25mm are our most popular camshafts for all sorts of motorsport 229-F 282/286 degree racing camshafts. Suits an 282 286 244 248 11.00mm 11.00mm 112 120 2.36mm 1.40mm 0.25mm 0.25mm E85 blend. Must use shimless bucket or shim under bucket conversion 229-E Drag Racing camshafts to suit top end 290 290 252 252 10.30mm 10.00mm 110 120 2.67mm 1.60mm 0.25mm 0.25mm performance. Designed to keep the valvetrain stable even on stock buckets 229-G Pro Import camshafts to suit extreme boost, 292 302 252 260 10.80mm 10.80mm 112 120 2.44mm 1.96mm 0.25mm 0.25mm high RPM 2J motors on alcohol. Shimless buckets preferred 229-X Custom cam specification for 1JZ engines. We can manufacture cams to your specifications or design a profile for your specific application.

The camshaft selection above are designed to run with the stock cam bucket with shim on top unless otherwise stated.

Matching Components for Toyota 1JZ - GTE

229 Part No Description A C D E F G KVS02 Single valve spring set to drop in on stock retainers and give the correct pressure to run with our camshafts • • • • • •

54 Toyota Supra 2JZ-GTE

The camshaft selections below are designed to run with the stock cam bucket with shim on top. For engines that have shimless or shim under cam bucket valve train conversions, we have an endless range of profile designs available so please contact us to discuss your requirements.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex T202-A High performance street cams for a near 248 248 210 210 8.70mm 8.70mm 109 119 0.68mm 0.06mm 0.25mm 0.25mm stock engine. Suits up to 30 lb boost and 7000 RPM with our recommended valve spring T202-B Street performance cams, turbo and 260 260 222 222 9.35mm 9.35mm 108 119 1.31mm 0.26mm 0.25mm 0.25mm computer upgrade. Suits up to 30 lb boost and 7500 RPM with our recommended valve spring T202-C 264/272 degree street, strip or track day 264 272 228 232 9.65mm 9.65mm 107 116 1.73mm 0.94mm 0.25mm 0.25mm camshafts, good response and midrange power. Suits up to 30 lb boost and 8000 RPM with our recommended valve spring T202-D 272/278 degree racing camshafts. These 272 278 236 240 9.95mm 9.95mm 110 120 1.83mm 0.94mm 0.25mm 0.25mm are our most popular camshafts for all sorts of motorsport T202-F 282/286 degree racing camshafts. Suits a 282 286 244 248 11.00mm 11.00mm 112 120 2.36mm 1.40mm 0.25mm 0.25mm E85 blend. Must use shimless bucket or shim under bucket conversion T202-E Drag racing camshafts to suit top end 290 290 252 252 10.30mm 10.00mm 110 120 2.67mm 1.60mm 0.25mm 0.25mm performance. Designed to keep the valvetrain stable even on stock buckets T202-G Pro import camshafts to suit extreme boost, 292 302 252 260 10.80mm 10.80mm 112 120 2.44mm 1.96mm 0.25mm 0.25mm high RPM 2J motors on alcohol. Shimless buckets preferred T202-X Custom cam specification for 2JZ engines. We can manufacture cams to your specifications or design a profile for your specific application.

The camshaft selection above are designed to run with the stock cam bucket with shim on top unless otherwise stated.

Matching Components for Toyota 2JZ - GTE

T202 Part No Description A C D E F G KVS02 Single valve spring set to drop in on stock retainers and give the correct pressure to run with our camshafts • • • • • •

55 Toyota 3RZ-FE DOHC

The camshaft selections below are designed to run with the stock cam bucket with shim on top. For engines that have shimless or shim-under cam bucket valve train conversions, we have an endless range of profile designs available so please contact us to discuss your requirements.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 180-A Stage 1 high performance camshafts 264 272 228 232 9.65mm 9.65mm 107 116 1.73mm 0.94mm 0.25mm 0.25mm for mildly tuned, turbocharged 3RZ-FE engine builds 180-B Stage 2 racing camshafts for well modified, 272 278 236 240 9.95mm 9.95mm 110 118 1.83mm 1.30mm 0.25mm 0.25mm turbocharged 3RZ-FE engines builds 180-C Drag racing camshafts to suit top end high 290 290 252 252 10.30mm 10.00mm 110 118 2.67mm 1.96mm 0.25mm 0.25mm HP turbocharged 3RZ-FE engines 180-D Drag racing camshafts, must use shimless 280 286 240 246 11.00mm 11.00mm 110 118 2.13mm 1.53mm 0.25mm 0.25mm buckets, suits high boost engines in the 800-1000 HP range 180-E Drag racing camshafts, must use shimless 288 306 250 263 11.55mm 11.60mm 112 118 2.49mm 2.49mm 0.25mm 0.25mm buckets, suits high boost race engines using alcohol 180-X Custom cams for Toyota 2RZ/3RZ engines. We can manufacture cams to your specifications or design a profile for your specific application.

56 Toyota / Lexus 1UZ-FE 4.0L V8

The Kelford catalogue range of cams for this fantastic engine is extensive, but if you don’t see what you’re looking for we can easily produce a custom cam for you. Kelford has been designing cams for these engines for a long time and for every application imaginable. We will have a design for anything you can throw at us, whether it is a twin turbo drag car, supercharged boat or road car, NZ Super Stock, or a street machine. We know these engines inside out.

Duration Advertised @ 1mm Part No Application Duration Valve Lift Valve Lift Centrelines Lift @ TDC Valve Clearances In Ex In Ex In Ex In Ex In Ex In Ex 207-A Mild road or jet boat upgrade, ‘drop in’ on 268 274 206 222 8.12mm 8.00mm 109 111 0.54mm 0.93mm 0.30mm 0.30mm stock valve springs 207-C 264 degree mild performance cams, ECU 264 264 224 224 9.36mm 9.36mm 108 108 1.37mm 1.37mm 0.25mm 0.25mm upgrade required 207-D 272 degree mid range performance cams, 272 272 232 232 9.60mm 9.60mm 106 108 2.05mm 1.83mm 0.25mm 0.25mm ECU upgrade required 207-E Racing camshafts to suit good exhaust, 286 286 246 246 9.65mm 9.65mm 104 104 3.00mm 3.00mm 0.25mm 0.25mm raised compression, eight throttles etc 207-F NZ Super Stock Stage 1 racing camshafts to 298 298 243 246 10.35mm 9.30mm 102 104 2.92mm 2.92mm 0.25mm 0.25mm suit engines with stock cam buckets 207-G NZ Super Stock fully modified racing 294 294 249 243 10.70mm 10.35mm 100 102 3.56mm 3.15mm 0.25mm 0.25mm engine, 430+HP. Must use shimless or shim under bucket 207-SC Supercharger camshafts, requires 260 268 220 228 9.55mm 9.50mm 110 117 1.02mm 0.74mm 0.25mm 0.30mm ECU upgrade 207-T1 High performance camshafts for mild 264 264 224 224 9.35mm 9.35mm 109 114 1.26mm 0.77mm 0.25mm 0.25mm turbocharged engines 207-X Custom cams for Toyota 1UZ-FE engines. We have a massive range of camshaft profiles available for these engines, so we can manufacture cams to your desired figures or design a profile to suit your individual application.

Matching Components for Toyota / Lexus 1UZ-FE 4.0L V8

207 Part No Description A C D E F G SC T1 KVS1UZ Racing valve springs that 'drop in' on the stock retainer • • • • • • •

57 Kelford Valve Springs

Matching the correct valve spring to the correct camshaft and to your application is of significant importance. When selecting a valve spring for you we consider crucial factors such as valve train weights, stiffness, valve acceleration curve, camshaft drive type and RPM. Kelford Cams specialises in valve train design and our innovative designs cater for the intricacies and unique requirements of a range of engines.

We are proud to release a new range of valve springs created specifically to suit Kelford camshafts and the various applications they are used in. Designed here at Kelford and manufactured using the finest spring wire and latest surface finishing techniques by PAC Racing in the USA, you’re selecting the highest quality product to protect your investment.

Chevrolet

Part No Application KVS4918 Chevrolet LS Series V8. (except LS7). High quality Pacaloy beehive valve spring set. Can be used with OEM retainers, titanium retainers are also available. 130lb at 1.800" coil bind at 1.060 KVS1518 Chevrolet LS Series V8. Premium quality gold nitrided Pacaloy beehive valve spring set. For use with OEM retainers, titanium retainers are also available. 130lb at 1.800" coil bind at 1.060. Requires a custom spring base if used in LS7 KVS1518

Chrysler

Part No Application KVS265 Chrysler Hemi 215-265ci six cylinder. High performance single valve spring set to suit mild hudraulic lifter camshafts. Fits the OEM head and retainer, no machining required. 105lb at 1.700" Maximum lift .500"

Ford

Part No Application KVS401 Ford 105E-116E and Formula Ford. High performance single valve spring set to suit OEM retainers. 67lb seat pressure at 1.260. Coil bind is at .708" KVS402 Ford 105E-116E. High performance Pacaloy dual valve spring set to suit racing camshafts. Requires cylinder head machining and requires retainer part number RET1600. 82lb seat pressure at 1.260" Coil bind at .670" KVS40-K KVS2004-K Ford 2000 OHC. (Pinto) high performance single valve spring and chrome moly retainer set. Suits mid level performance camshafts, up to 13mm lift in 1970's-80's Pinto engines. 80lb seat pressure, 185lb at 11mm lift. Maximum lift 13.00mm KVS42-K Ford 2000 OHC. Ovate wire, beehive valve spring and titanium retainer set. The ultimate valve spring for your classic 1970's-80's Pinto engine. 95lb seat pressure at 38.00mm (1.496"), 225lb at 12.00mm valve lift. Maximum lift is 15.00mm KVS40-K Ford 4.0L 6CYL (Barra) BA-FG turbo and non turbo. High performance ovate wire, Pacaloy beehive valve spring and lightweight retainer set. 85lb seat pressure at 38.00mm, Coil bind at 24.00mm (26% increase over stock) KVS43 Ford Duratec 2.0L. (Not suitable for variable valve timing motors) ovate wire, Pacaloy beehive valve spring set. To suit competition engines. 75lb at 38.00mm installed height. Coil bind at 22.00mm

Holden

Part No Application KVS3800 Holden Ecotec V6. High performance beehive valve spring set. Drop in on stock retainers at 1.700" to give 110lb seat pressure. Coil bind at 1.115"

58 Honda

Part No Application KVS18-K Honda B16A/18C. High performance dual valve spring and titanium retainer set. Install at 34.00mm to give seat pressure of 85lb. Coil bind is at 18.50mm KVS18 Honda B16A/18C. High performance dual valve spring set to fit OEM retainers. Install at 34.00mm (1.338") to give seat pressure of 85lb. Coil bind is at 18.50mm KVS79-K KVS13D Honda B18/B20B. High performance Pacaloy dual valve spring set. Installed spring pressure is 66lb at 34.00mm (1.338") Coil is bind at 17.00mm KVS08 Honda H22A. Kelford Pacaloy premium quality gold nitride, dual valve spring set for use with stock retainers. (Titanium also available). 85lb seat pressure at 37.00mm. Coil bind at 20.00mm KVS79-K Honda K20A2. Premium quality ovate wire, beehive valve spring set with titanium retainers. Featuring nanopeen and gold nitride surface finish process' for the ultimate strength. Suits high RPM N/A motors and high boost turbo motors. Drop in on the OEM spring base to give 88lb seated pressure. 15.00mm maximum lift

Mazda

Part No Application KVS12 Mazda B6, BP & BPT. High performance Pacaloy valve spring set to suit OEM retainers. Installed spring pressure is 66lb

Mitsubishi

Part No Application KVS11 Mitsubishi 4B11-T Evo X. High performance Pacaloy valve spring set to suit the OEM retainer and spring base.75lb seat pressure at 35.00mm (1.378") install height. Coil bind is at 22.00mm KVS63-BTK Mitsubishi 4G63 DOHC Evo 1-9. High performance Pacaloy beehive spring and titanium retainer set. Suits high RPM, high boost competition engines. Install at 90lb. Maximum valve lift is 13.50mm KVS63-BTK KVS63-BK Mitsubishi 4G63 DOHC Evo 8-9. High performance Pacaloy beehive spring to suit stock retainers. Suits high RPM, high boost competition engines. Install at 90lb. Maximum valve lift is 13.50mm KVS63 Mitsubishi 4G63 DOHC VR4-Evo 7. High performance Pacaloy single valve spring set to suit OEM retainer and spring base. 83lb seat pressure at 39.00mm. Coil bind is at 24.00mm

59 Nissan

Part No Application KVS14D Nissan A12-A15. High performance dual valve spring set to suit OEM retainers. This spring set only suits full race A series engines with aggressive camshafts (not for street motors). 95lb seat pressure at 38.00mm Install height. Coil bind is at 25.50mm KVS14 Nissan A12-A15. High performance Pacaloy single valve spring set to suit OEM retainers. Suits most street and race applications including NZ Ministock racing. 70lb seat pressure at 38.00mm. Coil bind is at 25.50mm KVS14 KVS22 Nissan GTI-R. High performance Pacaloy dual valve spring set to suit OEM retainers. (Fits Nissan Gti-R solid lifter cylinder head only). 85lb seat pressure at 39.00mm installed height. Coil bind is at 23.00mm KVS4200 Nissan L16-L20 (4cyl). High performance dual valve spring set, for use with OEM retainers and spring base. 90lb seat pressure at 41.2mm, 225lb at 11.00mm lift. Maximum lift 15.00mm KVS4206 Nissan L20-L28 (4cyl). High performance dual valve spring set, for use with OEM retainers and spring base. 90lb seat pressure at 41.2mm, 225lb at 11.00mm lift. Maximum lift 15.00mm

KVS20 Nissan RB20DE -DET. High performance Pacaloy valve spring set to suit OEM retainers and spring base. Also fits KVS1855-BT Early RB25 heads that did not have variable valve timing. 85lb seat pressure at 36.00mm install height. Coil bind is at 22.00mm KVS25R Nissan RB25DE-DET (with NVCS). High performance valve spring set. Includes lightweight steel retainers for the intake side and replacement spring bases for the exhaust side to even up the install heights. 70lb seat pressure at 32.60mm installed height. 10.50mm maximum lift KVS15 Nissan RB26DETT. 'Drop in' high performance Pacaloy single valve spring set to suit OEM retainers and spring base. 80lb seat pressure at 39.10mm installed height. Coil bind is at 24.00mm

KVS1855-BT Nissan RB26DETT. The ultimate racing valve spring and retainer set. Specifically made by Kelford for competition KVS10-BT RB26 engines. Pacaloy beehive valve springs featuring nitride and nanopeen process' for the ultimate strength. 105lb seat pressure at 39.10mm installed height. Coil bind is at 26.50mm KVS10-BT Nissan SR16/20-VE. Pacaloy beehive valve spring and titanium retainer set. Nanopeen and gold nitride surface finishing treatments for superior endurance, 37501 CPM natural frequency. Designed specifically for Nissan SR-VE racing engines. 95lb seat pressure, 15.00mm maximum lift KVS10 Nissan SR16/20VE. Kelford designed Pacaloy dual valve spring set. Nanopeen and gold nitride surface process for the ultimate strength. For use with stock retainers. 85lb seat pressure at 37.00mm installed height. Coil bind is at 20.00mm KVS10 KVS93 Nissan SR20DE/T. 'Drop in' Pacaloy high performance single valve spring set. For use with OEM retainers and spring base. 85lb seat pressure at 40.50mm installed height. Coil bind is at 25.00mm KVS93-BT Nissan SR20-DET. Premium quality ovate wire, beehive valve spring set with titanium retainers. Featuring nanopeen and gold nitride surface finish process' for the ultimate strength. Suits high RPM, high boost turbo motors. Drop in on the OEM spring base to give 95lb seat pressure. 15.00mm maximum lift KVS04-N Nissan TB48. High performance Pacaloy valve spring set to suit OEM retainers. Suits N/A and mild turbocharged engines. 67lb seat pressure at 37.00mm install height. Coil bind is at 22.00mm

KVS56 Nissan VK56DE-(T). High performance Pacaloy valve spring. Featuring nanopeen and gold nitride surface finishing KVS93-BT for superior strength and performance. Suits OEM retainers. 62lb seat pressure. 12.50mm maximum lift KVS56-BT Nissan VK56DE-(T). Ovate wire, Pacaloy beehive valve spring set. Featuring nanopeen and gold nitride surface finishing for superior strength and performance. This spring and retainer set suits high RPM high boost racing applications with vvt disabled. 95lb seat pressure, 195lb at 12.00mm lift. Maximum lift 12.50mm KVS35 Nissan VQ35DE-(T). High performance Pacaloy valve spring. Featuring nanopeen and gold nitride surface finishing for superior strength and performance. Suits OEM retainers. 62lb seat pressure. 12.50mm maximum lift KVS35-BT Nissan VQ35DE-(T). Ovate wire, Pacaloy beehive valve spring set. Featuring nanopeen and gold nitride surface finishing for superior strength and performance. This spring and retainer set suits high RPM high boost racing applications with vvt disabled. 95lb seat pressure. 195lb at 12.00mm lift. Maximum lift 12.50mm KVS38 Nissan VR38DETT. High performance 'drop in' valve spring set to suit OEM retainers. 75lb seat pressure at 33.00mm Installed height. 11.50mm maximum lift. Coil bind is at 20.00mm

60 Seadoo / Rotax

Part No Application KVS03 Seadoo / Rotax 1503. High performance valve spring and titanium retainer set to suit 232 series Kelford Racing Cams for Jet Ski racing applications

Subaru

Part No Application KVS96 Subaru EJ20 Version 3-4. Spring and retainers to suit engines with shim over bucket or shim-less buckets. 87lb seat pressure at 42.00mm installed height KVS1847-BT Subaru EJ20/25 2000 - current. Ovate wire, Pacaloy beehive valve spring set with titanium retainers. Nanopeen KVS96 and gold nitride surface finishing treatments for superior endurance. High frequency, increased seat pressure, low open pressure. Designed specifically for the Subaru flat four. 105lb seat pressure at 36.00mm installed height. Coil bind is at 23.00mm. 12.00mm maximum lift KVS109-STi Subaru EJ20/25 high performance Pacaloy valve spring set. 'Drop in’ fit on the OEM retainer. 85lb seat pressure at 36.00mm install height. Coil bind is at 22.00mm KVS97 Subaru WRX Version 3 - 4 (STi). High performance valve spring set. The OEM STi retainer needs slight maching to fit these springs. 87lb seat pressure at 42.00mm installed height KVS1847-BT

Suzuki

Part No Application KVS05 Suzuki Swift M15-16. High performance valve spring and titanium retainer set. 55lb seat pressure at 33.50mm install height. Coil bind is at 20.00mm

Toyota

Part No Application KVS04 Toyota 1FZ. High performance Pacaloy valve spring set to suit OEM retainers. Suits N/A and mild turbocharged engines. 67lb seat pressure at 37.00mm install height. Coil bind is at 22.00mm KVS929 KVS01-24 Toyota 1GR-FE. Kelford Racing, high performance Pacaloy valve spring set for turbocharged and supercharged 1GR-FE engines KVS02 Toyota 1JZ - 2JZ-GTE. 'Drop in' Pacaloy valve spring set to suit OEM retainers. Featuring Nanopeen and Gold nitride surface finish treatment for superior endurance. 80lb seat pressure. 11.50mm Maximum lift KVS1UZ Toyota 1UZ-FE. 'Drop in' Pacaloy valve spring set to suit OEM retainers. Featuring Nanopeen and Gold nitride surface finish treatment, this is the highest quality 1UZ spring on the market. 80lb seat pressure at 33.00mm installed height. Coil bind is at 20.50mm

KVS4K Toyota 3K, 4K & 5K.' Drop in' performance valve spring set to suit OEM retainers. 80lb seat pressure at 36.50mm KVS02 installed height. Coil bind is at 22.00mm KVS109-3S Toyota 3S-GE / GTE Generation 2-3 Engines. 'Drop In' Pacaloy valve spring set to suit OEM retainers. 85lb seat pressure at 36.00mm installed height. Coil bind is at 22.00mm KVS51-B Toyota 4A-GE 20 Valve, high performance valve spring set. 58lb seat pressure at 36.60mm installed height. Coil bind is at 23.00mm KVS101-16 Toyota 4A-GE. ‘Drop in’ Pacaloy valve spring set to suit OEM retainers. 43lb seat pressure at 35.00mm installed height. Coil bind is at 22.00mm KVS109-3S KVS929 Toyota Alzetta (Beams engine). 'Drop in' high performance valve spring set to suit OEM retainers. 75lb seat pressure at 40mm installed height. Coil bind is at 26.00mm

61 Additional camshaft types we have available on request

As well as our catalogue camshaft selection, we keep a range of camshaft billets to suit the engine models below. For all of these engines we have a library of popular cam profiles that we have developed over the years, plus we have the ability to design and grind to any custom specification to suit your application. To order a custom camshaft using any of these cam cores please complete the adjacent form and send it to us via email or fax.

BMC A series Fiat 125-132 DOHC Holden Ecotec V6 BMC B series Ford 1.6-2.0L ZETEC Holden V6 series 2 BMW M20 Ford 429-460 Honda K20A3 / K24 BMW M30 Ford Falcon 4.1 X FLOW Kawasaki GPZ900 (early model) BMW M40 Ford Falcon AU SOHC Nissan VG30 Quad Cam Chevrolet 396-454 Big Block Ford Falcon EA SOHC Pontiac V8 Chrysler 225 6 Cylinder Ford Falcon XA 250 Rover 4.6 V8 Chrysler 273-360 Ford FE 390-427 Toyota 1GR-FE Chrysler 361-440 Holden 179-202

To order a custom camshaft using any of these cam cores please complete the adjacent form and send it to us via email or fax.

62