HDV, AVCHD, DV g HD/SD-SDI For only $495

HD/SD-SDI +5V HD/SD-SDI ( & Audio) PWR nanoConnect HDMI Convergent Design HDMI g HD/SD-SDI

Status 1394

Introducing nanoConnect HDMI g HD/SD-SDI Converter Upgrade your Connection Simple Setup and Operation Now you can affordably add full HD/SD-SDI output to nanoConnect is so simple, there are no cards to install or your / deck and enjoy high-quality 100% digital software to load. No messy cabling or DIP switches to video and audio. Analog conversion losses are a thing of set up. Just plug in the HDMI cable from your source the past. and nanoConnect automatically locks to the incoming signal and ouputs the corresponding HD/SD-SDI (with HDV, AVCHD and DV Playback embedded audio). We even include the power supply and nanoConnect works with virtually any HDMI enabled an HDMI cable. Nothing could be easier! source, including the new AVCHD as well as HDV devices. You can even play back your DV tapes and Works with popular NLEs or live-capture get SD-SDI. nanoConnect works with most popular NLEs that support deck control via Firewire. Now you can avoid all the , or SD rendering and performance issues of HDV and AVCHD nanoConnect takes advantage of the decoder and scaler and capture uncompressed HD/SD or into an I-Frame inside of your HDV / AVCHD camera / deck, so you can . You can also capture “never-compressed” live- get 1080i or 720p or SD video-out independent of your output for the ultimate in video quality. native format. This versatile converter supports a wide range of frame rates and resolutions, including 60, 59.94, 50, 30, 29.97, 25, 24, and 23.98 Hz.

See www.convergent-design.com for more info. (866) 654-0080