P I P E L I N E S O L U T I O N S

HYDROTEST PUMP www.tritorc.com

TRITORC THP SERIES PNEUMATIC (AIR DRIVEN) HYDRAULIC TEST BENCH

TRITORC- Hydraulic test benches are compact and delicacy tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. TRITORC Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations.

THE MAXIMUM OPERATING PRESSURE UP TO 6400 BAR.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.

OUR MAIN PRODUCTS INCLUDING:

High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers) High Pressure Systems (Gas/Liquid Booster Stations,FM200 filling machine, Tube Expanding Machine) High Pressure Test Equipment(Hydraulic/Burst/ machine,Cylinder test machine, Valve test bench,Impulse Testing Machine, etc.)

PRODUCT APPLICATION

Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.

OUR SERVICE

13 months’ free warranty since the purchasing date and free technical support during lifetime We oer the most complete range of Air driven liquid pump models in the industry measured for: A. Capability of ultimate pressure, flow or output horsepower. B. Compatibility with a broad variety of liquids, such as oil, water and chemical applications.

1 www.tritorc.com

APPLICATIONS INCLUDE:

• Pressure testing • Burst (Hydrostatic) testing • Work holding/power clamping • Jacking/lifting • Valve actuator control • Hydraulic cylinder actuation • Press safety overload devices • Roller tensioning • Metering • Precision lubrication and spraying • Liquefied gas transfer

KEY FEATURES INCLUDE:

• driven - no electricity required (connect to normal air ) • In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar • No airline lubricator required • to 640Mpa (6400 bar) • Wide range of models with dierent ratios • Built-in-cooling on most models • Easy to install, operate and maintain • Best price / performance ratio • No heat, flame or spark risk and explosion proof • Automatic pressure holding, whatever the cause of the pressure drop, the TRITORCpump will automatically start, keep the loop pressure constant.

Application Pictures

2 www.tritorc.com

TRITORC LIQUID BOOSTER SYSTEM WORKING CIRCUIT

Air Compressor Driven Air Pressure:3-8 Bar Flow Rate: 800-1000L/min

Pneumatic(Air Driven) Portable And Small Size Automatic And Easy Operating Max Pressure Upto 640mpa

Drive Air Inlet Here

Low Pressure High Pressure Liquid Inlet Liquid Outlet

Tritorc Liquid Booster System Boost Medium: Water/oil/chemical Liquid For Hydraulic/hydroststic Test Or Chemical Injection

3 www.tritorc.com

THP SEREIS HYDRAULIC PRESSURE TEST BENCH-THE HOTTEST SELLING MODEL C CABINET

The standard hydraulic test bench including following parts:

Circuit Principle for Tritorc Hydrostatic System Test Cabinet

10 TRITORC Booster Pump 11 Tested Part driving air switch 6 7 Mue 2 High pressure liquid outlet

driving air 9 inlet conecting 1 with air compressor Pressure gage F.R.L Combination

13 Unloading Valve

16 Liquid Tank 3 Liquid filter

Air - driven liquid booster pump. Stainless steel material cabinet (Three models for choosing). F.R.L combination for driven air (adjusts air pressure, add lubricating oil and filter). Driven air switch (Pump starting switch), driven air pressure gauge, water tank. Liquid Inlet /outlet switch, high pressure liquid Guage, unloading valve, interconnecting pipes etc. And we could also customize it according to clients’ special requirement, as well as we provide chart recorder.

CHART RECORDER

4 www.tritorc.com

THP SERIES HYDRAULIC PUMP TEST BENCH WITHOUT CHART RECORDER

The standard hydraulic test bench including following parts:

Drive Air Inlet Port

High Pressure Outlet Port

5 www.tritorc.com

THP-L SERIES LOW FLOW RATE LIQUID PUMPS (SINGLE ACTING, AIR DRIVE HEAD)

They have aluminum bodies, with oxidation treatment and wetted materials of carbon steel or stainless steel, which depending on dierent service liquid. Material of stainless steel, making them an excellent choice of water application.

• Portable design. • High quality seals, long service life available • Easy to install, operate and maintenance. • Explosion proof and no electrical power required.

TECHNICAL SPECIFICATION

Pressure High MAX Flow Boost Driven air MAX Outlet Driven air pressure rate

Model Ratio pressure PL Pressure (Bar) inlet port Outlet port (L/Min)**

THP-LFP1 1:1 3-8 bar 8 NPT 1/2" 9/16"-18 UNF 20.50 THP-LFP4 4:01 3-8 bar 32 NPT 1/2" 9/16"-18 UNF 15.36 THP-LFP100 10:01 3-8 bar 80 NPT 3/4" 9/16"-18 UNF 7.15 THP-LFP16 16:01 3-8 bar 128 NPT 1/2" 9/16"-18 UNF 4.59 THP-LFP30 30:01:00 3-8 bar 240 NPT 1/2" 9/16"-18 UNF 2.53 THP-LFP44 44:01:00 3-8 bar 352 NPT 3/8" 9/16"-18 UNF 1.41 THP-LFP64 64:01:00 3-8 bar 512 NPT 3/8" 9/16"-18 UNF 0.95 THP-LFP100 100:01:00 3-8 bar 800 NPT 3/8" 9/16"-18 UNF 0.64

THP-LFP170 170:01:00 3-8 bar 1360 NPT 3/8" 9/16"-18 UNF 0.37

The outlet liquid pressure=Driven air pressure*boost ratio In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar.

6 www.tritorc.com

TH-MFP SERIES MEDIUM FLOW RATE LIQUID PUMPS (SINGLE ACTING, AIR DRIVEN HEAD)

Medium Flow Rate Pump have aluminum bodies and wetted materials of stainless steel or carbon steel ,which depends on dierent service liquid. Materials of stainless steel, make them an excellent choice of water application. High quality seals, long service life available.

TECHNICAL SPECIFICATION

High Pressure Driven air MAX Outlet Driven air pressure MAX Flow

Model Ratio pressure PL Pressure (Bar) inlet port Outlet port (L/Min)**

TH-MFP4 4:01 3-8 bar 32 NPT 1/2" 9/16"-18 UNF 70 TH-MFP6 6:01 3-8 bar 48 NPT 1/2" 9/16"-18 UNF 29.91 TH-MFP10 10:01 3-8 bar 80 NPT 1/2" 9/16"-18 UNF 18.84 TH-MFP16 16:01 3-8 bar 128 NPT 1/2" 9/16"-18 UNF 12.42 TH-MFP28 28:01:00 3-8 bar 224 NPT 1/2" 9/16"-18 UNF 7.11 TH-MFP40 40:01:00 3-8 bar 320 NPT 1/2" 9/16"-18 UNF 4.89 TH-MFP64 64:01:00 3-8 bar 512 NPT 1/2" 9/16"-18 UNF 3.08 TH-MFP80 80:01:00 3-8 bar 640 NPT 1/2" 9/16"-18 UNF 2.44

TH-MFP100 100:01:00 3-8 bar 800 NPT 1/2" 9/16"-18 UNF 1.92

TH-MFP130 130:01:00 3-8 bar 1040 NPT 1/2" 9/16"-18 UNF 1.47

TH-MFP175 175:01:00 3-8 bar 1400 NPT 3/8" 9/16"-18 UNF 1.14

TH-MFP255 255:01:00 3-8 bar 2040 NPT 1/4" 9/16"-18 UNF 0.75

TH-MFP400 400:01:00 3-8 bar 3200 NPT 1/4" 9/16"-18 UNF 0.48

TH-MFP510 510:01:00 3-8 bar 4080 NPT 1/4" 9/16"-18 UNF 0.65

TH-MFP800 800:01:00 3-8 bar 6400 NPT 1/4" 9/16"-18 UNF 0.42

NOTE: THP Series Hydraulic Pump Test Bench also available with Chart Recorder. The outlet liquid pressure=Driven air pressure*boost ratio In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar.

7 www.tritorc.com

THP-DAH SERIES HIGH FLOW RATE LIQUID PUMPS (DOUBLE ACTING, AIR DRIVEN HEAD)

They are characterized by the same features as the MFP pumps single acting, single air drive head types, but they have less pulsations and deliver approx. 50 % more flow.

TECHNICAL SPECIFICATION

High Pressure Driven air MAX Outlet Driven air pressure MAX Flow

Model Ratio pressure PL Pressure (Bar) inlet port Outlet port (L/Min)**

TH-DHFP4 4:01 3-8 bar 32 NPT 1/2" 9/16"-18 UNF 70 TH-DHFP6 6:01 3-8 bar 48 NPT 1/2" 9/16"-18 UNF 48.60 TH-DHFP10 10:01 3-8 bar 80 NPT 1/2" 9/16"-18 UNF 30.61 TH-DHFP16 16:01 3-8 bar 128 NPT 1/2" 9/16"-18 UNF 19.73 TH-DHFP28 28:01:00 3-8 bar 224 NPT 1/2" 9/16"-18 UNF 11.30 TH-DHFP40 40:01:00 3-8 bar 320 NPT 1/2" 9/16"-18 UNF 7.69 TH-DHFP64 64:01:00 3-8 bar 512 NPT 1/2" 9/16"-18 UNF 4.94 TH-DHFP80 80:01:00 3-8 bar 640 NPT 1/2" 9/16"-18 UNF 3.96

TH-DHFP100 100:01:00 3-8 bar 800 NPT 1/2" 9/16"-18 UNF 3.13

TH-DHFP130 130:01:00 3-8 bar 1040 NPT 1/2" 9/16"-18 UNF 2.40

TH-DHFP175 175:01:00 3-8 bar 1400 NPT 3/8" 9/16"-18 UNF 1.81

TH-DHFP255 255:01:00 3-8 bar 2040 NPT 1/4" 9/16"-18 UNF 1.23

TH-DHFP400 400:01:00 3-8 bar 3200 NPT 1/4" 9/16"-18 UNF 0.79

NOTE: THP Series Hydraulic Pump Test Bench also available with Chart Recorder. The outlet liquid pressure=Driven air pressure*boost ratio In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar.

8 www.tritorc.com

THE STANDARD LIQUID PUMP SYSTEM INCLUDING FOLLOWING PARTS:

Air–driven liquid booster pump (LFP/MFP/DHFP Three series for choosing) Stainless steel (carbon steel) material cabinet (Three models for choosing) F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter) Driven air switch (Pump starting switch), driven air pressure gauge, water tank Liquid inlet/outlet switch, high pressure liquid gauge, unloading valve, interconnecting pipes etc. And we could also customize it according to clients’ special requirement.

For the hydraulic test station (liquid booster station), we have three different cabinet design for choosing

Model A Model B Model C closed type with closed type with frame type with carbon material stainless steel material stainless steel material

How to Select TRITORC Air Driven Liquid Boosters/Systems? In order to choose suitable liquid booster pump or systems for you, please kindly reply us the following questions:

1.What is the liquid you want to booster?

2. What outlet liquid pressure do you want?()bar

3. What driven air pressure (of your air compressor) can you oer?( )bar, because our booster is completely air operated and no need any electricity

4. What outlet liquid flow rate do you need?( )L/min

9 www.tritorc.com

• Chart Ø163 / 6” • Chart Ø223 / 9” • Chart Ø300 / 12” • Chart Ø223 / 9” • Chart Ø300 / 12” • IP45 • IP65 • IP65 • Only 6.4kg / • Only 10.6kg / • Compact • Up to 3 felt tip • Lockable 14.1 lbs 23.4 lbs • Only 3.1kg / pens • Only 10.6kg / 6.8 lbs • Only 6.4kg / 23.4 lbs • Original Peli™ Case 14.1 lbs • Vortex valve™ • IP67 • Reinforced Padlock Protectors Portable, flush or wall mounted • Virtually indestructable Case and wetted parts 316L Stainless Steel • Lightweight design ATEX II 2G c or II 2D c compliant • Meets airline carry-on regulations

• Zero adjustable pointer • Standard 100 charts included • Standard extra felt tip pen

10 TRITORC INC. 5041 Spencer Highway, Suit # 302, Pasadena, Texas: 77502, USA Tel: +1 281 5068672, E-mail: [email protected]

TRITORC FZC R6-05C, Saif Zone, P.O. Box No: 513586, Sharjah, UAE, Tel: +971 65529407, E-mail: [email protected] www.tritorc.com

We have o ces at:- India, Oman, Qatar, Kuwait Saudi Arabia, Africa, UAE

Specialized in sales, rentals & onsite bolting & services