Fiber Optic Luminaire Introduction to Cold Luminaries 1,2,3,4 Masonlite Cold cathode

Continuity fluorescent fixtures.

Long Life

h o u r s each time its turned on - unlike flourescent lamps.

Consistency 2.4 mtr which has 20 to 40 light emitting for every meter length.

Dimmability sophisticated ballast or .

Lumen/mtr

OutDoor Tel : +603-9282 9096 Fax:+603-920 25 4 3 2 http://www.neon-lighting.com http://www.fiberlight.com.my email : [email protected] This catalogue cancels and replaces all previous catalogues of the same product ranges. TiME Luminaries Sdn Bhd reserves the right to make technical, formal or dimensional modification at any time, without prior notice obligation. Copyright Reserved No images, articles and illustrations in part or whole are allowed to be reproduced or duplicated in any form without written permission from TiME Luminaries Sdn Bhd. ‘Hot ’ at Cold Cathode vs Fluorescent each end of lamp coated with emissive materials to emit . - usually made of Bulb coil Phosphor Coating Lead in Gas

The interior of a standard . A tungsten coil is coated within emissive material. Lamp life is dramatically reduced by 3 hours each time its switched on.

Dark shadows are typical drawbacks of fluorescent lighting fixtures

TYPICAL EXPECTED L AMP L IFE : COL D C ATHOD E VS. FLU OR ESCENT

The chart at right illustrates the typical lamp life

5 10 15 20 25 30 35 40 45 50 55 Fiber Optic Luminaire Introduction to Cold Cathode Luminaries 4 Masonlite Cold cathode

mp can be 2.4m long thode la r cold ca linea A single 20 - 40 LEDs required for every 1 m length

light emitted all 360 180 max around lamp

Cold Cathode Led light