Combined Planning Data Standard Technical Specification Greater London Authority

15 May 2019

Notice

This document and its contents have been prepared and are intended solely as information for Greater London Authority and use in relation to Technical Specification for Planning Information Data Standard Atkins Limited assumes no responsibility to any other party in respect of or arising out of or in connection with this document and/or its contents. This document has 29 pages including the cover.

Document history Revision Purpose description Originated Checked Reviewed Authorised Date Rev 1.0 Draft Tech Spec of GLA JM CH WS WS 17/05/2019 Planning Information Data Standard

Client signoff Client Greater London Authority Project Combined Planning Data Standard Job number

Client signature / date

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 2 of 29

Contents

Chapter Page

Introduction 4 Combined Planning Data Standard Structure 5 Purpose of this Document 5 Simple UML Diagram 5 Table Descriptions 7 Features 9 9 Application 9 Householder 12 Prior Approvals 13 All Other 14 Existing Use 17 Superseding 17 Infrastructure 18 Parking 19 Waste 21 Residentia 22 Residential Units 23 Non-Residential 24 Non-Residential Units 24 Non-Residential Accommodation 25 Indoor Communal Space 25 Phasing 25 Buildings 25 Open Space 26 Types and Designations 26 Constraints 27 Enumerations 27 UseCode 27

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 3 of 29

Introduction This is the technical specification applicable to the Combined Planning Data Standard for London, Devon and South Hams. The Combined Planning Data Standard supplements the existing 1APP Planning Information Schema.

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 4 of 29

Combined Planning Data Standard Structure Purpose of this Document

This is the technical specification applicable to the Combined Planning Data Standard. This technical specification is intended to be interpreted and used by planning submission portals, back-office system providers and the London Development Database to support the ongoing Greater London Authority project to automate and enrich the flow of development data in London, Devon and South Hams.

Simple UML Diagram

What is UML?

UML stands for Unified Modelling Language, a standard visual modelling language for software-based systems.

The data structure for the Combined Planning Data Standard is described using a simple UML diagram (overleaf) to show the relationships between abstract classes and entities. This diagram is followed a series of tables containing text that describes the abstract classes, entities and individual features.

The UML diagram should be interpreted using the following key:

Inheritance

Association

The follow colour scheme for associations in the UML diagram denote multiplicity:

Blue: 1:1 (exactly one instance) Green: 1:1..* (at least one instance) Orange: 1:0..* (zero or more instances)

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 5 of 29

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 6 of 29

Table Descriptions

A Table refers to an entity or abstract class in the data hierarchy. Each entity is defined below referring to the attribute themes that are contained within them:

APPLICATION DEFINITION An entry that provides key information relevant to all application types. Holds identifiers, descriptions and the location attributes of the permission. This table DESCRIPTION also holds information about the nature of the decision and starts and completion dates.

HOUSEHOLDER DEFINITION An entry that provides key information relevant to householder applications. Holds information relating to the category of householder development, proposed DESCRIPTION additional floorspace, parking and additional bedrooms/bathrooms.

PRIOR APPROVALS DEFINITION An entry that provides key information relevant to prior approval applications. Holds information relating to occupation status, intended starts and completion dates DESCRIPTION and the developer.

ALL OTHER DEFINITION An entry that provides key information relevant to all other applications. Holds information relating to various requirement assessments, intended starts and DESCRIPTION completion dates if the scheme isn’t phased, contributions associated with decision and infrastructure requirements.

EXISTING USE DEFINITION An entry that provides information relating to the existing use of the site. DESCRIPTION Contains the existing gross internal floor areas associated with each use class.

SUPERSEDING DEFINITION An entry that provides information relating to the superseding of existing permissions. Contains the application numbers, unit references and component details of those to DESCRIPTION be wholly or partially superseded.

INFRASTRUCTURE An entry that provides information relating to the infrastructure requirements for the DEFINITION development. DESCRIPTION Contains information on infrastructure demands, electric vehicles and emissions.

PARKING

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 7 of 29

DEFINITION An entry that provides information relating to parking provision for the development. DESCRIPTION Contains information on proposed and existing parking provision.

WASTE DEFINITION An entry that provides information relating to waste facilities for the development. Contains whether provision has been made for internal and external storage of dry DESCRIPTION recycling, food waste and residual waste.

RESIDENTIAL DEFINITION An entry that provides summary information relating to proposed residential units. Contains the number of proposed residential units, total floor area to be lost and/or DESCRIPTION gained and densities.

RESIDENTIAL UNITS DEFINITION An entry that provides information on all residential units to be gained or lost. Contains the unit types of each residential unit, floor areas, tenure and other related DESCRIPTION details.

NON-RESIDENTIAL DEFINITION An entry that provides summary information relating to non-residential units. DESCRIPTION Contains the site area and total floor areas to be lost and/or gained

NON-RESIDENTIAL UNITS DEFINITION An entry that provides information on each non-residential unit to be gained or lost. DESCRIPTION Contains the use class of each non-residential unit and the gross internal floor area.

NON-RESIDENTIAL ACCOMODATION DEFINITION An entry that provides summary information on non-residential bedrooms. DESCRIPTION Contains the numbers of council tax rateable bedrooms lost/gained and site area.

INDOOR COMMUNAL SPACE DEFINITION An entry that provides indoor communal floorspace for each building DESCRIPTION Contains the indoor communal floorspace for each building

PHASINGBUILDINGS DEFINITION An entry that provides details on the phasingdifferent forbuildings the development proposed in (if the appropriate) development DESCRIPTION Contains the projectedreference, commencement maximum height and and completion number of dates storeys for for each each phase building

OPEN SPACE DEFINITION An entry that provides details on open space

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 8 of 29

DESCRIPTION Contains the total area of open space in the development

TYPES AND DESIGNATIONS DEFINITION An entry that provides information relating to types and designations of open space Contains details on the loss/addition/change of use of designated and non-designated DESCRIPTION open space

CONSTRAINTS DEFINITION An entry that provides information relating to constraints on the development DESCRIPTION Contains the results of spatial analysis with common constraints

Features

A Feature is an attribute that exists within an abstract class or entity. This feature may be represented by a data field of specific type, size and multiplicity. Below is an example of what a feature table describes:

Definition of what the feature is Name of feature

TITLE_NUMBER Definition: Describes the Land Registry title number that distinguishes a property from those with similar addresses Type: character Size: 100 Multiplicity: 1..*

Maximum size of field (characters and Multiplicity, or cardinality is spaces or digits for numeric) the number of times the feature is expected to occur Feature data type (e.g. character, integer, date) in addition to whether the feature may be null

Application

TITLE_NUMBER Definition: Describes the Land Registry title number that distinguishes a property from those with similar addresses Type: character Size: 100 Multiplicity: 1..* EPC_NUMBER Definition: Describes the most recent Energy Performance Certificate number subject to the property having one Type: integer Size: 24 Multiplicity: 0..1

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 9 of 29

DESCRIPTION Definition: Provides a general description of proposed development Type: character Size: 200 Multiplicity: 1 UPRN Definition: Contains Unique Property Reference Number for the Decision provided by Local Planning Authority Type: integer Size: 12 Multiplicity: 1 CENTROID_EASTING Definition: Contains Easting for the Centroid showing the location of the decision Type: integer Size: 6 Multiplicity: 1 CENTROID_NORTHING Definition: Contains Northing for the Centroid showing the location of the decision Type: integer Size: 6 Multiplicity: 1 SITE_NAME Definition: Describes the site name or number Type: character Size: 50 Multiplicity: 1 STREET_NAME Definition: Describes the street name Type: character Size: 50 Multiplicity: 1 SECONDARY_STREET_NAME Definition: Describes the secondary street name Type: character Size: 50 Multiplicity: 0..1 LOCALITY Definition: Describes the locality Type: character Size: 50 Multiplicity: 1 WARD Definition: Describes the Ward Type: character Size: 50 Multiplicity: 1 BOROUGH Definition: Describes the Borough Type: Size: 50 Multiplicity: 1 POSTCODE Definition: Describes the postcode Type: character Size: 50 Multiplicity: 1 LPA_NAME Definition: Contains the Local Planning Authority name Type: character Size: 50 Multiplicity: 1 DECISION_AGENCY Definition: Contains the Decision Agency Valid Values: Borough; Planning Inspectorate; Secretary of State; Government Department; Greater London Authority; London Legacy Development Corporation; Old Oak and Park Royal Development Corporation

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 10 of 29

Type: character Size: 100 Multiplicity: 1 PERMISSION_TYPE Definition: Describes the Permission Type Type: character Size: 100 Multiplicity: 1 LPP_APPLICATION_NO Definition: Describes the reference number assigned by the Local Planning Authority Type: character Size: 50 Multiplicity: 1 URL_PLANNING_APP Definition: Contains a URL to the published planning application Type: character Size: 200 Multiplicity: 1 SUBDIVISION_BUILDING Definition: Describes details of subdivision of building the permission relates to, null if whole building Type: character Size: 200 Multiplicity: 0..1 VALID_DATE Definition: Contains the date at which the decision is valid (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 1 LAST_DATE_CONSULTATION_COMMENTS Definition: Contains the last date for consultation comments (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 1 DECISION_DATE Definition: Contains the decision date for the application (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 1 DECISION Definition: Contains the decision given Type: character Size: 200 Multiplicity: 1 DECISION_PROCESS Definition: Describes the process by which a decision was made Valid values: Delegated; Committee Type: character Size: 20 Multiplicity: 1 DECISION_STATUS Definition: Describes the status of the decision Type: character Size: 200 Multiplicity: 1 APPEAL_START_DATE Definition: Contains the appeal start date for the application (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 1 APPEAL_DECISION Definition: Contains Appeal Decision Type: character Size: 200 Multiplicity: 0..1 APPEAL_DECISION_DATE Definition: Contains the appeal decision date for the application (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 0..1

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 11 of 29

DECISION_TARGET_DATE Definition: Contains the decision target date for the application (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 1 DECISION_CONDITIONS Definition: Describes the conditions associated with the decision Type: character Size: 200 Multiplicity: 1..* LAPSED_DATE Definition: Contains the Lapsed Date for the permission (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 1 ACTUAL_COMMENCEMENT Definition: Contains the actual commencement date for the development (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 0..1 ACTUAL_COMPLETION Definition: Contains the actual completion date for the development (DD/MM/YYYY) Type: date Size: 8 Multiplicity: 0..1 DEVELOPMENT_TYPE Definition: Describes the Development Type Valid values: New Build; Extension; Conversion; Change of Use Type: character Size: 20 Multiplicity: 1 CIL_LIABILITY Definition: Describes if the development is liable to CIL Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1

Householder

TOTAL_GIA Definition: Describes the total Gross Internal Floor Area to be added by the development Type: float Size: 10 Accuracy: 2 Multiplicity: 1 HOUSEHOLDER_DEV_CATEGORY Definition: Describes one or more householder development categories appropriate for the development Valid values: Roof Extension; Conversion; Additional Floor Added Upwards; Basement Extension; Additional Floor Added Downwards; Rear Extension; Side Extension; Front Extension Type: character Size: 50 Multiplicity: 1..* HOUSEHOLDER_DEV_CATEGORY_OTHER Definition: Describes one or more householder development categories in addition to those already defined Type: character Size: 50 Multiplicity: 0..* NO_ADDITIONALBEDROOMS Definition: Describes the total number of additional bedrooms proposed Type: integer Size: 10 Multiplicity: 1 NO_ADDITIONALBATHROOMS

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 12 of 29

Definition: Describes the total number of additional bathrooms proposed Type: integer Size: 10 Multiplicity: 1 RESIDENTIALEXTENSION_EXEMPT Definition: Describes if an application for exemption as residential extension been submitted Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 EXISTING_OFFROAD_PARKING Definition: Describes the number of existing off-road parking spaces Type: integer Size: 10 Multiplicity: 1 PROPOSED_OFFROAD_PARKING Definition: Describes the number of proposed off-road parking spaces Type: integer Size: 10 Multiplicity: 1

Prior Approvals

OCCUPATION_STATUS Definition: Describes the occupation status of the existing buildings Valid values: Vacant; Partially Vacant; Occupied Type: character Size: 20 Multiplicity: 1 SCHEME_NAME Definition: Contains a name for the scheme Type: character Size: 200 Multiplicity: 0..1 INTENDED_COMMENCEMENTDATE Definition: Describes the date in which commencement is intended to occur (MM/YYYY) Type: date Size: 6 Multiplicity: 0..1 INTENDED_COMPLETIONDATE Definition: Describes the date in which completion is intended to occur (MM/YYYY) Type: date Size: 6 Multiplicity: 0..1 LEAD_DEVELOPER Definition: Contains the name of the company as lead developer Type: character Size: 50 Multiplicity: 1 UK_COMPANYREGISTRATION_NO Definition: Contains the Company Registration Number at Companies House Condition: If OVERSEAS_COMPANYREGISTRATION_NO is present, this field is null Type: character Size: 50 Multiplicity: 0..1 OVERSEAS_COMPANYREGISTRATION_NO Definition: Contains an overseas company registration number Condition: If UK_COMPANYREGISTRATION_NO is present, this field is null Type: character Size: 200 Multiplicity: 0..1 RESIDENTIALEXTENSION_EXEMPT

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 13 of 29

Definition: Describes if an application for exemption as residential extension been submitted Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1

All Other

OWNERSHIP_STATUS Definition: Describes the ownership status of the building Valid values: Public; Private; Mixed Type: character Size: 7 Multiplicity: 1 GIA_EXISTING Definition: Contains the total existing gross internal floor area in sq. m Type: float Size: 10 Accuracy: 2 Multiplicity: 1 VIABILITY_ASSESSMENT Definition: Describes whether a Viability Assessment supporting document has been submitted Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 3D_MODEL Definition: Describes whether a 3D model has been submitted as part of application Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 CIRCULARECONOMY_STATEMENT Definition: Describes whether a circular economy statement has been submitted as part of application Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 AIRQUALITY_ASSESSMENT Definition: Describes whether an air quality assessment has been submitted as part of application Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 TRANSPORTIMPACT_ASSESSMENT Definition: Describes whether a transport impact assessment has been submitted as part of application Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 AFFORDABLEHOUSING_FASTTRACK Definition: Describes whether the scheme will be fast tracked for purposes of affordable housing Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 SCHEME_NAME Definition: Contains a name for the scheme Type: character Size: 200 Multiplicity: 1 LEAD_DEVELOPER

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 14 of 29

Definition: Describes the name of the company as lead developer Type: character Size: 50 Multiplicity: 1 UK_COMPANYREGISTRATION_NO Definition: Contains the Company Registration Number at Companies House Condition: If OVERSEAS_COMPANYREGISTRATION_NO is present then this field will be null Type: character Size: 200 Multiplicity: 0..1 OVERSEAS_COMPANYREGISTRATION_NO Definition: Contains an overseas company registration number Condition: If UK_COMPANYREGISTRATION_NO is present then this field will be null Type: character Size: 200 Multiplicity: 0..1 LEAD_REGISTERED_SOCIAL_LANDLORD Definition: Contains organisation name of lead registered social landlord Type: character Size: 200 Multiplicity: 0..1 SCHEME_PHASING Definition: Describes whether the scheme is phased Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 INTENDED_COMMENCEMENT_DATE Definition: Contains the intended commencement date if the scheme is not phased (MM/YYYY) Condition: If SCHEME_PHASING is No then this field will be null Type: date Size: 6 Multiplicity: 0..1 INTENDED_COMPLETION_DATE Definition: Contains the intended completion date if the scheme is not phased (MM/YYYY) Condition: If SCHEME_PHASING is No then this field will be null Type: date Size: 6 Multiplicity: 0..1 GARDEN_LAND_LOST Definition: Describes whether there is a loss of garden land Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 COMMUNITYENERGY_CAPACITY Definition: Describes the MW capacity of Community Energy Facilities Type: integer Size: 10 Multiplicity: 1 FIRE_SUPPRESSIONSYSTEM Definition: Describes whether a fire suppression system is proposed Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 SURFACE_WATER_DISCHARGE_REDUCTION Definition: Contains the percentage reduction in surface water discharge for a 1 in 10-year rainfall event Type: integer Size: 3 Multiplicity: 1 GREEN_SUDS Definition: Describes whether Green SuDS are to be incorporated in drainage design

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 15 of 29

Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 INTERNAL_RESI_WATER_USAGE Definition: Contains the expected internal residential water usage as litres per person per day Type: integer Size: 10 Multiplicity: 1 RAINWATER_HARVESTING Definition: Describes whether Rain Water Harvesting will exist in the development Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 GREYWATER_REUSE Definition: Describes whether Grey Water re-use will be present in the development Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 S106_AGREEMENT Definition: Describes whether a Section 106 agreement exists in relation to decision Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 AFFORDABLEHOUSING_INLIEU_PAYMENT Definition: Contains the payment to be made in lieu of affordable housing Type: integer Size: 10 Multiplicity: 1 PROVIDED_AFFORDABLEHOUSING_OFFSITE Definition: Contains the number of affordable housing units to be provided off site Type: integer Size: 10 Multiplicity: 1 ACQUIRED_AFFORDABLEHOUSING_OFFSITE Definition: Contains the number of affordable housing units to be acquired off site Type: integer Size: 10 Multiplicity: 1 TRANSPORT_CONTRIBUTIONS Definition: Contains the contributions to be made to transport as part of the development Type: integer Size: 10 Multiplicity: 1 OTHER_CONTRIBUTIONS Definition: Contains the amount of other contributions to be made as part of the development Type: integer Size: 10 Multiplicity: 1 SOCIALINFRASTRUCTURE_CONTRIBUTIONS Definition: Contains the amount of social infrastructure contributions to be made as part of the development Type: integer Size: 10 Multiplicity: 1 MAYORAL_CIL_NOTICE_ISSUED Definition: Describes whether a Mayoral CIL Liability Notice has been issued Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 BOROUGH_CIL_NOTICE_ISSUED Definition: Describes whether a Borough CIL Liability Notice has been issued

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 16 of 29

Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 COMMENCEMENT_NOTICE_RECEIVED Definition: Describes whether a commencement notice has been received for the development Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 PROJECTED_COSTOFWORKS Definition: Describes the cost bracket in which the development is expected to fall within Valid values: Up to £2m; Between £2m and £100m; Over £100m Type: character Size: 50 Multiplicity: 1 EXISTING_UPRNS Definition: Contains any existing Unique Property Reference Numbers that exist for existing buildings Type: integer Size: 200 Multiplicity: 0..* VACANT_BUILDING_FLOORSPACE Definition: Contains the floorspace of qualifying vacant buildings in m2 Type: float Size: 10 Accuracy: 2 Multiplicity: 0..1 NO_COMMERCIALUNITS_WITHFULLFIBRE Definition: Contains the number of commercial units that have full fibre internet connection Type: integer Size: 10 Multiplicity: 1

Existing Use

USE_CLASS Definition: Describes an existing use class of the development Valid values: A1; A2; A3; A4; A5; B1; B1a; B1b; B1c; B2; B8; C1; C2; C2a; C3; C4; D1; D2; SG Type: UseCode Size: 3 Multiplicity: 1..* GROSS_INTERNALFLOOR_AREA Definition: Contains the gross internal floor area for the use class Type: float Size: 10 Accuracy: 2 Multiplicity: 1..*

Superseding

LPA_APPLICATION_NUMBER Definition: Contains the reference number of permissions to be wholly or partially superseded Type: character Size: 100 Multiplicity: 0..* PARTIAL_SUPERSEDENCE Definition: Describes whether the reference number is to be partially or wholly superseded Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..*

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 17 of 29

UNIT_REFERENCE Definition: Contains the unit reference to be partially superseded Valid values: If PARTIAL_SUPERSEDENCE is Yes then this field must be present Type: character Size: 100 Multiplicity: 0..* DESCRIPTION Definition: Describes the component detail which is to be partially superseded Valid values: If PARTIAL_SUPERSEDENCE is Yes then this field must be present Type: character Size: 200 Multiplicity: 0..*

Infrastructure

NO_WATERCONNECTIONS_REQUIRED Definition: Contains the number of new water connections required to development Type: integer Size: 10 Multiplicity: 1 NO_HOMESWITH_ELECTRICALHEATING Definition: Contains the number of homes with electrical heating Type: integer Size: 10 Multiplicity: 1 NO_HOMESWITH_FULLFIBRE Definition: Contains the number of homes to be served by full fibre internet Type: integer Size: 10 Multiplicity: 1 MOBILENETWORKOPERATOR_CONSULTATION Definition: Describes whether consultation with mobile network operators has taken place Valid values: Yes; No Type: Size: 10 Multiplicity: 1 NO_SLOW_EVCHARGINGPOINTS Definition: Contains number of Slow EV Charging points Type: integer Size: 10 Multiplicity: 1 NO_RAPID_EVCHARGINGPOINTS Definition: Contains number of Rapid EV Charging points Type: integer Size: 10 Multiplicity: 1 NO_FAST_EVCHARGINGPOINTS Definition: Contains number of Fast EV Charging points Type: integer Size: 10 Multiplicity: 1 CHP_HEATPUMPS_CAPACITY Definition: Contains capacity of CHP/Heat Pumps in MW Type: float Size: 10 Multiplicity: 1 SOLAR_PV_CAPACITY Definition: Contains capacity of Solar/PV in MW Type: float Size: 10 Multiplicity: 1 NO_HOMES_PASSIVECOOLING Definition: Contains number of homes with passive cooling

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 18 of 29

Type: integer Size: 10 Multiplicity: 1 TOTAL_ANNUAL_NOX_EMISSIONS Definition: Contains total annual Nox emissions in Kg Type: float Size: 10 Accuracy: 2 Multiplicity: 0..1 TOTAL_ANNUAL_PM_EMISSIONS Definition: Contains total annual PM emissions in Kg Type: float Size: 10 Accuracy: 2 Multiplicity: 0..1 GHG_REDUCTION Definition: Describes whether Green House Gas reduction is over and above those set out in Part L of Building Regulations Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 GREEN_ROOF_AREA Definition: Contains the area of proposed green roof in m2 Type: float Size: 10 Accuracy: 2 Multiplicity: 1 URBANGREENINGFACTOR_SCORE Definition: Contains the urban greening factor score for the development Type: float Size: 10 Accuracy: 2 Multiplicity: 0..1 DEMOLITION_CONSTRUCTION_RECYCYLING Definition: Contains the percentage of demolition/construction material to be recycled Type: float Size: 10 Accuracy: 2 Multiplicity: 1 NO_GASCONNECTIONS_REQUIRED Definition: Contains the number of new gas connections required Type: integer Size: 10 Multiplicity: 1

Parking

NO_EXISTING_CAR Definition: Contains the number of existing car spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_CAR Definition: Contains the number of proposed car spaces Type: integer Size: 10 Multiplicity: 1 NET_CAR Definition: Contains the net number of car spaces Type: integer Size: 10 Multiplicity: 1 NO_EXISTING_BLUEBADGE Definition: Contains the number of existing blue badge spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_BLUEBADGE

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 19 of 29

Definition: Contains the number of proposed blue badge spaces Type: integer Size: 10 Multiplicity: 1 NET_BLUEBADGE Definition: Contains the net number of blue badge spaces Type: integer Size: 10 Multiplicity: 1 NO_EXISTING_CYCLE Definition: Contains the number of existing cycle spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_CYCLE Definition: Contains the number of proposed cycle spaces Type: integer Size: 10 Multiplicity: 1 NET_CYCLE Definition: Contains the net number of cycle spaces Type: integer Size: 10 Multiplicity: 1 NO_EXISTING_MOTOCYCLE Definition: Contains the number of existing motocycle spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_MOTOCYCLE Definition: Contains the number of proposed motocycle spaces Type: integer Size: 10 Multiplicity: 1 NET_MOTOCYCLE Definition: Contains the net number of motocycle spaces Type: integer Size: 10 Multiplicity: 1 NO_EXISTING_LGV Definition: Contains the number of existing LGV spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_LGV Definition: Contains the number of proposed LGV spaces Type: integer Size: 10 Multiplicity: 1 NET_LGV Definition: Contains the net number of LGV spaces Type: integer Size: 10 Multiplicity: 1 NO_EXISTING_BUS Definition: Contains the number of existing bus spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_BUS Definition: Contains the number of proposed bus spaces Type: integer Size: 10 Multiplicity: 1 NET_BUS Definition: Contains the net number of bus spaces Type: integer Size: 10 Multiplicity: 1

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 20 of 29

NO_EXISTING_RESI_OFFSTREET Definition: Contains number of existing residential only off street parking spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_RESI_OFFSTREET Definition: Contains number of proposed residential only off street parking spaces Type: integer Size: 10 Multiplicity: 1 NET_RESI_OFFSTREET Definition: Contains net number of residential only off street parking spaces Type: integer Size: 10 Multiplicity: 1 NO_EXISTING_CARCLUB Definition: Contains the number of existing car club spaces Type: integer Size: 10 Multiplicity: 1 NO_PROPOSED_CARCLUB Definition: Contains the number of proposed car club spaces Type: integer Size: 10 Multiplicity: 1 NET_CARCLUB Definition: Contains net number of car club parking spaces Type: integer Size: 10 Multiplicity: 1

Waste

PROVISION Definition: Describes whether every unit (resi and non-resi) have dedicated internal and external areas for storage of dry recycling, food waste and residual waste Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 1 UNIT_REFERENCE Definition: Contains the unit reference number in the development that does not have provision for dry recycling, food waste or residual waste Condition: If PROVISION is No, then this field must be present Type: character Size: 50 Multiplicity: 0..* INTERNAL_DRYRECYCLING Definition: Describes whether the unit does not provide internal storage space for dry recycling Condition: If UNIT_REFERENCE is present, then this field must be present Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..* INTERNAL_FOODWASTE Definition: Describes whether the unit does not provide internal storage space for food waste Condition: If UNIT_REFERENCE is present, then this field must be present Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..*

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 21 of 29

INTERNAL_RESIDUALWASTE Definition: Describes whether the unit does not provide internal storage space for residual waste Condition: If UNIT_REFERENCE is present, then this field must be present Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..* EXTERNAL_DRYRECYCLING Definition: Describes whether the unit does not provide external storage space for dry recycling Condition: If UNIT_REFERENCE is present, then this field must be present Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..* EXTERNAL_FOODWASTE Definition: Describes whether the unit does not provide external storage space for food waste Condition: If UNIT_REFERENCE is present, then this field must be present Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..* EXTERNAL_RESIDUALWASTE Definition: Describes whether the unit does not provide external storage space for residual waste Condition: If UNIT_REFERENCE is present, then this field must be present Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..* REASON Definition: Describes why provision has not been made for this unit Condition: If UNIT_REFERENCE is present, then this field must be present Type: character Size: 200 Multiplicity: 0..*

Residentia

NO_PROPOSED_RESIDENTIALUNITS Definition: Contains the number of proposed residential units for the development Type: integer Size: 10 Multiplicity: 1 TOTAL_GIA_LOST Definition: Contains the total Gross Internal Floor area for residential units to be lost in m2 Type: float Size: 10 Accuracy: 2 Multiplicity: 1 TOTAL_GIA_GAINED Definition: Contains the total Gross Internal Floor area for residential units to be gained in m2 Type: float Size: 10 Accuracy: 2 Multiplicity: 1 SITEAREA_RESIDENTIALUNITS Definition: Contains the site area for residential units in hectares Type: float Size: 10 Accuracy: 2 Multiplicity: 1 DWELLING_DENSITY Definition: Contains the number of dwellings by area

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 22 of 29

Type: float Size: 10 Accuracy: 2 Multiplicity: 1 HABITABLEROOMS_DENSITY Definition: Contains the number of habitable rooms by area Type: float Size: 10 Accuracy: 2 Multiplicity: 1

Residential Units

NO_RESIDENTIALUNITS Definition: Contains the number of residential units Type: integer Size: 10 Multiplicity: 0..* UNIT_TYPE Definition: Describes the unit type of the residential units to be gained/lost Valid values: Terraced Home; Semi Detached Home; Detached Home; Flat, Apartment or Maisonette; Live/Work Unit; Cluster Flat; Studio or Bedsit; Gypsy/ Traveller pitch; Co Living Unit; HMO; Other; Hostel Room; Hotel Room; Apart-Hotel Room; Secure Residential Room; Student Accommodation; Non-permanent Dwellings; Houseboat Moorings Type: character Size: 100 Multiplicity: 0..* UNIT_TYPE_OTHER Definition: Describes a unique unit type of the residential units to be gained/lost Condition: If UNIT_TYPE is Other, then this field must be present Type: character Size: 200 Multiplicity: 0..* GIA Definition: Contains the gross internal floor area for these residential units to be gained/lost Type: float Size: 10 Accuracy: 2 Multiplicity: 0..* NO_HABITABLEROOMS Definition: Describes the number of habitable rooms in these residential units to be gained/lost Type: integer Size: 10 Multiplicity: 0..* NO_BEDROOMS Definition: Describes the number of bedrooms in these residential units to be gained/lost Type: integer Size: 10 Multiplicity: 0..* TENURE Definition: Describes the tenure of these residential units to be gained/lost Type: character Size: 50 Multiplicity: 0..* M42_COMPLIANT Definition: Describes whether these residential units to be gained/lost are M4(2) compliant Type: boolean Size: 3 Multiplicity: 0..* M432A_COMPLIANT Definition: Describes whether these residential units to be gained/lost are M4(3) 2a compliant Type: boolean Size: 3 Multiplicity: 0..* M432B_COMPLIANT Definition: Describes whether these residential units to be gained/lost are M4(3) 2b compliant Type: boolean Size: 3 Multiplicity: 0..*

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 23 of 29

SHELTERED_ACCOMMODATION Definition: Describes whether the unit/s contain sheltered accommodation Type: boolean Size: 3 Multiplicity: 0..* PROVIDER Definition: Describes the provider for a group of units Valid values: Private; Housing Association; Local Authority; Other Public Authority; Council Delivery Company; Other Affordable Housing Provider; Self-Build; Private Rented Sector; Council Delivered Build to Rent Type: character Size: 20 Multiplicity: 0..* GARDEN_LAND Definition: Describes whether garden land exists in the residential unit/s Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..* OLDER_PERSONS Definition: Describes the provision for older persons Valid values: Specialist Older Persons Housing; Older Persons Care Home Accommodation; Older Persons Supported and Specialised Accommodation Type: character Size: 50 Multiplicity: 0..*

Non-Residential

GIA_LOST Definition: Contains the total gross internal floor area for non-residential units to be lost in m2 Type: float Size: 10 Multiplicity: 1 GIA_GAIN Definition: Contains the total gross internal floor area for non-residential units to be gained in m2 Type: float Size: 10 Multiplicity: 1 SITE_AREA Definition: Contains the total site area for non-residential units in hectares Type: float Size: 10 Multiplicity: 1

Non-Residential Units

USE_CLASS Definition: Describes a use class of the non-residential unit to be gained or lost Valid values: A1; A2; A3; A4; A5; B1; B1a; B1b; B1c; B2; B8; C1; C2; C2a; C3; C4; D1; D2; SG Type: UseCode Size: 3 Multiplicity: 0..* GIA Definition: Contains the gross internal floor area for this use class to be gained or lost in m2 Type: float Size: 10 Accuracy: 2 Multiplicity: 0..*

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 24 of 29

Non-Residential Accommodation

NO_COUNCILTAXRATEABLEUNITS_LOST Definition: Contains the number of council tax rateable units lost in non-residential accommodation Type: integer Size: 10 Multiplicity: 1 NO_COUNCILTAXRATEABLEUNITS_GAINED Definition: Contains the number of council tax rateable units gained in non-residential accommodation Type: integer Size: 10 Multiplicity: 1 SITE_AREA Definition: Contains the site area for non-residential accommodation units in hectares Type: integer Size: 10 Multiplicity: 1

Indoor Communal Space

BUILDING_REF Definition: Contains a reference to a building Type: character Size: 50 Multiplicity: 1..* GIA Definition: Contains the gross internal floor area for indoor communal amenities in m2 to be gained or lost Type: float Size: 10 Accuracy: 2 Multiplicity: 1..*

Phasing

DESCRIPTION Definition: Describes the phase Type: character Size: 200 Multiplicity: 0..* INTENDED_COMMENCEMENT_DATE Definition: Contains the intended commencement date for the phase, financial year (YYYY) Condition: If DESCRIPTION is present, then this field must be present Type: date Size: 4 Multiplicity: 0..* INTENDED_COMPLETION_DATE Definition: Contains the intended completion date for the phase, financial year (YYYY) Condition: If DESCRIPTION is present, then this field must be present Type: date Size: 4 Multiplicity: 0..*

Buildings

BUILDING_REF Definition: Contains the building reference number Type: character Size: 200 Multiplicity: 1..*

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 25 of 29

MAX_HEIGHT Definition: Contains the maximum height of the building in metres Type: float Size: 10 Accuracy: 2 Multiplicity: 1..* NO_STOREYS Definition: Contains the number of storeys for building Type: integer Size: 10 Multiplicity: 1..*

Open Space

TOTAL_AREA Definition: Contains the total area of open space in hectares Type: float Size: 10 Multiplicity: 1

Types and Designations

CHANGE_TYPE Definition: Describes the type of change to open or protected space Valid values: Loss; Gain; Change of Use Type: character Size: 50 Multiplicity: 1 DESIGNATION Definition: Describes whether the site is designated Valid values: Designated; Not Designated Type: character Size: 50 Multiplicity: 1 OPEN_SPACE_DESIGNATION Definition: Describes the open space designation Condition: If DESIGNATION is Not Designated, then then field is null Valid values: Green Belt; Metropolitan Open Land; Local Open Spaces Type: character Size: 50 Multiplicity: 1..* NATURE_CONSERVATION_DESIGNATION Definition: Describes the nature conservation designation Condition: If DESIGNATION is Not Designated, then then field is null Valid values: Statutory (SSSI, Local Nature Reserve); Site of Metropolitan Importance; Site of Borough Grade 1 Importance; Site of Borough Grade 2 Importance; Site of Local Importance Type: character Size: 50 Multiplicity: 0..* OPEN_SPACE_TYPE Definition: Describes the open space type Valid values: Parks and Gardens; Natural and semi-natural; Green Corridors; Outdoor Sports Facilities incl. School Playing fields; Amenity; Provision for children and young people; Allotments, Community Gardens, and City Farms; Cemetaries, Churchyards and other Burial Grounds; Countryside in Urban Fringe Areas; Civic Spaces; Brownfield Land; Non-Residential Instuition Grounds or Garden Type: character Size: 200 Multiplicity: 0..*

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 26 of 29

AREA Definition: Contains the area affected in hectares Type: float Size: 10 Accuracy: 2 Multiplicity: 1 ACCESS Definition: Describes the type of access Type: character Size: 50 Multiplicity: 1 DESCRIPTION Definition: Contains a description of the change Type: character Size: 200 Multiplicity: 1 LAND_SWAP Definition: Describes whether there will be a land swap Condition: If NATURE_CONSERVATION_DESIGNATION is present, this field is null Valid values: Yes; No Type: boolean Size: 3 Multiplicity: 0..1

Constraints

DESCRIPTION_CONSTRAINTSLAYER Definition: Describes the GIS layer in which the site is analysed against Type: character Size: 200 Multiplicity: 0..* RESULT Definition: Describes the result of overlaying with this GIS layer Type: character Size: 200 Multiplicity: 0..*

Enumerations

UseCode

USECODE DEFINITION A1 Retail A2 Financial and Professional Services A3 Restaurants and Cafes A4 Drinking Establishments A5 Hot food takeaways B1 Business B1a Offices B1b Studio B1c Light Industry B2 General Industrial B8 Storage and Distribution C1 Hotels C2 Residential Instituitions

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 27 of 29

C2a Secure Residential Instituitions C3 DwellingHouses C4 Small Houses in Multiple Occupation D1 Non-Residential Institutions D2 Assembly and Leisure SG SUI Generis

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Data Standard – Technical Specification Page 28 of 29

Jack Metcalfe Atkins Limited Nova North 11 Bressenden Place Westminster London SW1E 5BY

Tel: +44 (0)20 7121 2000

© Atkins Limited except where stated otherwise

DOC | 1.0 | 15 May 2019 Atkins | Combined Planning Technical Standard Page 29 of 29