Grandstream DP715/710 Configuration and Review

New Features/Promos (8) Welcome. 0 My account Sign Up internet phone service PRODUCTS HOW IT WORKS FEATURES RATES SUPPORT CONTACT US

MAKE CALLS RECEIVE CALLS ALL SERVICES Search

Home > Support > Grandstream DP715/710

Supported devices Grandstream DP715/710

ATA Adaptors IP Phones GENERAL INFORMATION Cordless DECT IP Phones Grandstream's DP715/710 is a reliable inexpensive DECT cordless IP Phone that works with the IP PBX Software Callcentric service when placed behind your broadband internet router. You can add up to 5 cordless hansets to the DP715 base unit. Desktop Softphones Mobile Softphones

Security considerations for Callcentric customers

3CX 3CX Version 6 RESOURCES 3CX Version 12 3CX Version 12.5 Websites Grandstream DP715/DP710 official product page 3CXPhone (for Windows)

3CXPhone (Mobile) Support Aastra 6753i Grandstream DP715 manual Acrobits/Groundwire for iPhone Android SIP Client Apivio MWP1100 Configuring Grandstream DP715/710 Asterisk 1.4 and 1.2 These instructions are based on hardware version 1.2A running the 1.0.0.8 firmware. This guide is based on Asterisk 1.6 the understanding that you are using the DECT Phone in its factory default configuration, which is to obtain a Asterisk 1.6.2, 1.8, and 10 dynamic IP address automatically from your router using DHCP, which is how most people have their home Asterisk Admin GUI routers configured. For information on configuring your DP715 with a static IP address, please refer to the Bria Desktop DECT Phone's user manual. Bria Mobile We recommend that you read each step through in its entirety before performing the action indicated in the Callcentric Android App step. Callcentric iPhone App Callcentric Softphone Step 1 Powering up and logging into your device Cisco ATA 186/188 Cisco SPA112/SPA122 Connect your router with the supplied Ethernet network cable to the DP715. Now connect your phone to the DP715. Finally plug the supplied power cable into the DP715. CloudTC Glass 1000 CSipSimple Once the device is fully powered up, pick up the phone connected to the DP715 and dial the * key D-Link DVG-1402S 3 times. Once you hear the menu enter 0 2 on your phone. You will now hear a message giving Ekiga you the IP address of your DP715. I.E.: 192.168.001.010 . Record this information. Elastix Gigaset A510 IP Step 2 Logging into your DP715 Gigaset C610A IP Open a web browser on your computer such as Internet Explorer and enter the IP address you Gigaset DX800A heard above in the address bar (I.E. where you would normally enter www.yahoo.com). Grandstream DP715/710 Grandstream GXP1450 Please note: some browsers will require you to remove leading zero's ( 0 's ) in the IP address. For Grandstream GXP2110 example if you heard 192.168.001.010 you should change this to 192.168.1.10. Grandstream GXP2200 You should now see a page that looks like this: Grandstream GXV3140 Grandstream HandyTone 286 Grandstream HandyTone 486 Grandstream HandyTone 702 Grandstream Wave Innomedia SIP MTA-6328 Jitsi Linksys PAP2 Linksys SPA3102 LinPhone Desktop LinPhone Mobile NCH Axon PBX Enter the password for the DP715 in the password field. The default administrator password for the NCH Express Talk DP715 is admin . You should be taken to a splash page showing your device's registration status, Nokia E90 firmware... etc: Obihai OBi100 OBi202 OBi1032 pbx-in-a-flash pbxnsip pbxnsip Version 3 PhonerLite Polycom SoundPoint IP 601 snom 1xx/2xx/3xx snom 820 snom M9 snom ONE SFLphone SJphone Telco AC-211 trixbox / Elastix / pbx-in-a-flash Twinkle Windows Messenger UTStarcom F3000 Vodia PBX Vtech VSP600 Vtech VSP725 Vtech VSP735 X-Lite / X-Pro / eyeBeam Yealink T32G Yealink W52P Yealink T42G Yealink T46G Yeastar MyPBX U100 ZoIPer Step 3 Configuring your Callcentric Profile settings ZoIPer 3.2 To do this click on the PROFILE 1 tab and configure the server settings for your Callcentric ZoIPer Mobile account. In the top section of the profile page you will need to fill the following fields: Zoom 5801

Other Linksys/Sipura products Setting Value Generic / Other Device Primary SIP Server callcentric.com Outbound Proxy callcentric.com DID-Based Routing with Asterisk SIP Transport UDP DID-Based Routing with trixbox / NAT Traversal (STUN) no, but send keep-alive Asterisk Admin GUI / Elastix / PBX-in-a-Flash Outgoing Call Without Registration no

Your configuration should look similar to the one shown below:

After filling in the fields as directed click the Update button at the bottom of the page. Your device will reboot. After waiting 30 seconds you should be ready to configure your account credentials.

Step 4 Configuring your Callcentric Account Login Information

To configure your Callcentric username and password click on HANDSETS . Under Handset 1 , fill in the following

Setting Value SIP User ID This is either the default extension 1777MYCCID OR 1777MYCCIDEXT , where 1777MYCCID is the 1777 number assigned to you by Callcentric and EXT is the three digit extension you are trying to register this UA to.

For example: 17770001234101 would register to extension 101 on account 17770001234.

You cannot register to your account using only the extension number. Authenticate ID This is either the default extension 1777MYCCID OR 1777MYCCIDEXT , where 1777MYCCID is the 1777 number assigned to you by Callcentric and EXT is the three digit extension you are trying to register this UA to.

For example: 17770001234101 would register to extension 101 on account 17770001234.

You cannot register to your account using only the extension number. Authenticate Password Enter your extension SIP Password here. Your extension SIP password is the password you created for the extension you are trying to use. You may edit the SIP password you wish to use in by logging into your My Callcentric account and clicking on the Extension menu link and then modifying the appropriate extension. Name Enter your name in this field

These settings should look similar to the ones below: Once the changes have been made click save then at the top of the page select Apply and wait 30 seconds then you're done.

Step 5 Properly rebooting your device

After filling in the fields as directed click the Update button at the bottom of the page.

You will again be taken to a screen indicating that the device is rebooting.

After 30 seconds, click BASIC SETTINGS link listed at the top of the page.

On the Basic Settings page click the Reboot button to reboot your DP715. Please wait at least 90 seconds for the unit to finish rebooting. Once the unit has finished rebooting you should no longer see the light on top of the DP715 blinking red. If the light is no longer blinking red then your unit is configured and ready to make calls. You should now see that your device is properly registered to your Callcentric account.

If the light on the top of the DP715 is still blinking red, please wait 2 minutes and then unplug the power, wait 10 seconds and plug it back in. If after another 2 minutes the light continues to blink red please verify that the settings you entered into the DP715 in step 9 are correct, and that your internet connection is currently up and running.

Step 6 That's it! You can now make a phone call.

You can make a test call to 17771234567, or if you are signed up for one of Callcentric's rate plans you can place a call to a traditional landline or mobile phone by dialing either: 1 + the area code and number for calls to the US Or 011 + the country code, area code, and number for calls worldwide (you may also use 00 instead of 011).