EN 2020/21
Product highlights YOU DON‘T BECOME GOOD AT WHAT YOU DO BY CHANCE
As a professional, you work hard because you demand high standards of yourself. Your next challenge on the construction site is always waiting for you just round the corner. And you can only achieve the best results if you deploy all your skills and use first-rate tools that help you unlock your full potential.
www.stabila.com 2 – 3 GOOD TOOLS – GOOD WORK
Taking precise measurements is one of the most important tasks on construction sites, which is why it is crucial that professionals have tools that they can rely on at all times. Tools that enable them to carry out a variety of measurement tasks on the construction site precisely, efficiently and easily – time after time.
www.stabila.com 4 – 5 Spirit levels
SPIRIT LEVELS
The best quality will prove its worth. Sooner or later. Measurement accuracy proven millions of times over thanks to permanently cast-in vials (locked vials), where the profile and vial are permanently aligned with one another. Precise measurement at all times – that is what we guarantee with every aluminium spirit level from STABILA. At STABILA, every tradesperson will find the right spirit level, perfectly matched to their requirements and application needs – light or tough, short or long, up to and including special spirit levels which are intended specifically for one particular trade.
Overview of pictograms
Measurement Shock-absorbing 0,5 mm/m accuracy in Rotatable angle vial Spacer end caps normal position Measurement Vial for slope accuracy in Slip stopper reverse position measurement
Illuminated vial Telescopic system Magnet
www.stabila.com 6 – 7 Spirit levels
TOP-QUALITY WHAT MAKES A STABILA SPIRIT LEVELS SPIRIT LEVEL?
4 FACTS
5 x YEAR in-house quality checks warranty* for each spirit level Installation technology Quality vials Readability
Locked vials: A special Highly transparent, hard-wearing Optimum readability thanks to All spirit epoxy resin ensures that the acrylic glass with precision- a fluorescent vial fluid. The vial levels are profile and vials are fixed ground inner contours and bubble is not deflected by static together – precisely aligned flush-fitting reference rings. charges. Accurate readings from > 2 million once for lasting accuracy. -20 °C to +50 °C. spirit levels produced every year
*Warranty declaration on the back www.stabila.com 8 – 9 Spirit levels
0,5 mm/m Type R 300 spirit level
Developed for the most demanding construction site use
The unparalleled type R 300 spirit level was to the torsion-resistant five-chamber R profile. developed specifically for the most demanding The extra-wide measuring surface provides a construction site applications and fulfils all the high level of protection from tipping over during requirements of professional users. It is not the measuring process. STABILA: we transform only handy and user-friendly, but also extremely practical experience into innovative products. tough, lightweight and highly robust thanks
Extremely robust Extra-wide Integrated Handrail over Art. No. ▸ Length: 18371 ▸ 61 cm / 18372 ▸ 81 cm / 18373 ▸ 100 cm / 18374 ▸ 122 cm / profile measuring surface slip stoppers the full length 18375 ▸ 183 cm / 18450 ▸200 cm / 18376 ▸244 cm
www.stabila.com 10 – 11 Spirit levels
0,5 mm/m STABILA type 196-2 spirit level
Also available:
Type 196-2 LED For work with high demands (illuminated vials)
Type 196-2 K (impact protection for bricklaying) On construction sites, spirit levels are put under a reinforced aluminium rectangular profile, together great deal of strain and can easily fall. That’s why it’s with STABILA installation technology featuring all the more important that your spirit level remains permanently cast-in vials, provides you with just as precise as on the day you bought it. The the perfect partner for demanding construction two vertical vials enable readings in any position. site applications. Spirit levels from STABILA – Not only that, but two finger-gripopenings also precision that lasts a lifetime. ensure a secure hold when working. The sturdy,
Comfortable Shock-absorbing Removable Integrated Art. No. ▸ Length: 15233 ▸ 61 cm / 15234 ▸ 81 cm / 15235 ▸ 100 cm / use end caps end caps slip stoppers 15236 ▸ 122 cm / 15237 ▸ 183 cm / 17209 ▸ 200 cm
www.stabila.com 12 – 13 Spirit levels
0,5 mm/m Type 96-2 M spirit level
Also available:
Type 96-2 Extra-strong adhesion for hands-free work (two vertical vials)
Type 96-2 K (impact protection for bricklaying) If you’re looking for a spirit level with exceptionally profile, together with STABILA installation strong rare-earth magnets, this model is just the technology featuring permanently cast-in ticket. This professional tool leaves your hands vials, provides you with the perfect partner for free when aligning and adjusting components, demanding construction site applications. Spirit while the magnets ensure optimum adhesion. The levels from STABILA – precise measurement, even two vertical vials enable readings in any position. after many years. The sturdy, reinforced aluminium rectangular
Strong rare-earth Shock-absorbing Ultra-rigid Integrated Art. No. ▸ Length: 15852 ▸ 40 cm / 15853 ▸ 61 cm / 15854 ▸ 81 cm / 15855 ▸ 100 cm / magnet end caps profile slip stoppers 15856 ▸ 122 cm / 15857 ▸ 183 cm / 15858 ▸ 200 cm
www.stabila.com 14 – 15 Spirit levels
0,5 mm/m Type 80 AS-2 spirit level
Also available: Slim, stable and handy profile for any measuring task
Type 80 AS (one vertical vial) Are you looking for a precise, reliable spirit level life. The vials and the measuring surfaces align with a slim profile? Then this model will definitely perfectly with one another during the production fit the bill. Its key highlight comes in the form of two process and are permanently connected, vertical vials that enable readings in any position. guaranteeing the very best in measuring accuracy The type 80 AS-2 reinforced aluminium rectangular over many years. This is a spirit level that delivers profile, together with STABILA installation what it promises. technology, ensures accuracy and a long service
Easy-clean Handy Coated measuring Integrated Art. No. ▸ Length: 19170 ▸ 60 cm / 19171 ▸ 80 cm / 19195 ▸ 90 cm / 19172 ▸ 100 cm / coating profile surfaces slip stoppers 19173 ▸ 120 cm / 19174 ▸ 150 cm / 19175 ▸ 180 cm / 19176 ▸ 200 cm
www.stabila.com 16 – 17 Spirit levels
0,5 mm/m Type 80 ASM spirit level
Convenient alignment of components thanks to a strong magnet system If you’re looking for an accurate and reliable and the measuring surfaces align perfectly with spirit level with exceptionally strong rare-earth one another during the production process and magnets, this model is just the ticket. The type 80 are permanently connected, guaranteeing the ASM zreinforced aluminium rectangular profile, very best in measuring accuracy over many years. together with STABILA installation technology, Produced for precision, ideal for applications on ensures accuracy and a long service life. The vials the construction site – typically STABILA.
Strong Handy Coated measuring Integrated Art. No. ▸ Length: 19177 ▸ 40 cm / 19178 ▸ 60 cm / 19179 ▸ 80 cm / 19180 ▸ 100 cm / rare-earth magnet profile surfaces slip stoppers 19181 ▸ 120 cm / 19182 ▸ 150 cm / 19183 ▸ 180 cm / 19184 ▸ 200 cm
www.stabila.com 18 – 19 Spirit levels
0,5 mm/m Type 70 spirit level
Also available: Classic profile, easy and comfortable to use Type 70 M (magnet system)
Type 70 W (angle vial) A large number of professionals place their trust other during the production process and then in the type 70 – a reliable, light and extremely permanently joined together to ensure maximum precise measuring tool. The wide range of models measuring precision over many years. cover a measuring range of 30 cm to 200 cm. As is the case with all STABILA spirit levels, the vial and measuring surface are perfectly aligned with each
Art. No. ▸ Length: Light High-quality vials for Coated Easy-clean 02281 ▸ 30 cm / 02282 ▸ 40 cm / 02283 ▸ 50 cm / 02284 ▸ 60 cm aluminium profile optimum readability measuring surface coating 02286 ▸ 80 cm / 02287 ▸ 90 cm / 02288 ▸ 100 cm / 02289 ▸ 120 cm 02290 ▸ 150 cm / 02291 ▸ 180 cm / 02292 ▸ 200 cm
www.stabila.com 20 – 21 Spirit levels
0,5 mm/m Type 70 Electric spirit level
Also available: Specially adapted to electricians’ requirements Pocket Electric (alignment of switches and plug sockets) This spirit level saves electricians a lot of time and the end caps ensure a secure hold on all surfaces. effort by correctly marking the vertical or horizontal Innovative solutions for special requirements – hole spacing of plug sockets and switches in a signature STABILA. single step. The slip stoppers on both sides of
Integrated High-quality vials for Light Integrated Art. No. ▸ Length: marking holes optimum readability aluminium profile slip stoppers 16135 ▸ 43 cm / 16136 ▸ 120 cm
www.stabila.com 22 – 23 Spirit levels
cm 0,5 mm/m Type 80 T telescopic spirit level
Always have the right length of level to do the job
Wouldn’t it be ideal if you could use only one spirit STABILA has developed an extendable spirit level for all types of work? Before now, most tools level that can be flexibly adjusted to the required have been either too long or too short for the task length. That’s our take on user-friendliness. at hand, requiring spirit levels of different lengths to deal with components of different sizes. Now,
High-quality Metric LOCK system Integrated Art. No. ▸ Length: telescopic system scale slip stoppers 18879 ▸ 63 – 105 cm / 18880 ▸ 80 – 127 cm
www.stabila.com 24 – 25 Spirit levels
cm/inch 0,5 mm/m Type 106 T telescopic spirit level
Also available: The extra-long spirit level for accurate measurements Type 106 M across irregularities and laths (magnet system) Extremely long and sturdy extendable spirit level measurements. Thanks to the two slip-on spacers, with telescopic system. The eccentric clamps the model is particularly suitable for measuring ensure a high level of measuring accuracy in any wood constructions or very uneven surfaces such position. Two small plates on the upper measuring as bowed timber. Another example of innovative surface compensate for any irregularities on design from STABILA. the surface being levelled and enable precise
High-quality Slip-on Strong Ultra-rigid Art. No. ▸ Length: telescopic system spacers eccentric clamp profile 17708 ▸ 183 – 315 cm / 17709 ▸ 213 – 376 cm
www.stabila.com 26 – 27 Spirit levels
0,5 mm/m Type 81 SV REM W360 Torpedo spirit level
Also available: Ideal for metal as well as for checking slopes and Type 81 SM Torpedo any angles (magnet system) When aligning and adjusting components, you spirit level features horizontal vials for gradients need both hands free, making a level with rare- of 1% and 2%, a vertical vial and an angle vial that earth magnets a must for many professionals. can be rotated through 360°. Practical, precise, With its milled measuring surface and V-groove, convenient to handle and robustly built – typically this model holds firmly on metal surfaces – and STABILA. especially on surfaces with a rounded shape. The
Compact Rotatable 360° 1% and 2% Strong Art. No. ▸ Length: profile angled vials slope measurement rare-earth magnet 16670 ▸ 25 cm
www.stabila.com 28 – 29 Spirit levels
Pocket PRO Magnetic spirit level
Professional quality in a mini format
You can carry this professional mini-format spirit level components on metal surfaces – and especially on wherever you go. Its tough aluminium-core housing surfaces with a rounded shape. The STABILA precision and the two milled measuring surfaces, featuring a vial ensures a high level of measuring accuracy. This V-groove and extra-strong rare-earth magnets, form spirit level is ideal for measuring tasks in narrow a 90° angle. This makes it easy to align and adjust spaces that are hard to reach.
Extremely small Strong rare-earth design magnet Tough Practical Art. No. ▸ Length: aluminium core belt clip 17953 ▸ 7 cm
www.stabila.com 30 – 31 Electronic measuring tools
ELECTRONIC MEASURING TOOLS
Innovative technology combined with sophisticated design. Electronic measuring tools are products that make taking even complex measurements a breeze, helping tradespeople to work more quickly and more effectively. Measurement data can be read directly and precisely, eliminating the need for complicated arithmetic. Products with high-quality, efficient and reliable sensors – and all with a standard of quality that’s made in Germany.
Overview of pictograms
Measurement Shock-absorbing Electronic module 0,5 mm/m accuracy in 4 x 90° end caps display normal position Measurement accuracy in Slip stopper Protection class reverse position
www.stabila.com 32 – 33 Electronic spirit level
0,5 mm/m 4 x 90° TECH 196 electronic IP 65
Also available: The gold standard – electronics for the most difficult TECH 196 M electronic IP 65 construction site conditions (magnet system) This rugged and practical high-quality spirit level the side. This model is protected against water and is an ideal choice for any trade. Its electronic dust in accordance with IP 65, so it is completely measuring technology and precision vials will make washable. STABILA has equipped this electronic your work quicker and simpler. The two illuminated spirit level with everything a professional needs, digital displays can be read from above and from making this a tool you can’t do without.
2 digital Illuminated Acoustic Waterproof and Art. No. ▸ Length: 17705 ▸40 cm / 17670 ▸ 61 cm / 17671 ▸ 81 cm / displays displays guidance dustproof 17672 ▸ 100 cm/ 17673 ▸ 122 cm / 17706 ▸ 183 cm
www.stabila.com 34 – 35 Electronic angle finder
0,5 mm/m 270° TECH 700 DA digital electronic angle finder
3 in 1 – more than just a digital angle finder
Extremely versatile – the TECH 700 DA digital angle vials. The locking mechanism allows you to use finder. A high-quality product made in Germany the tool as a bevel gauge and easily transfer the that perfectly combines three tools: angle finder, measured angles onto a part. Reap the benefits of spirit level and bevel gauge. Calculate exact angles this indispensable all-rounder, which performs the with the latest electronic measuring technology. work of three different tools, on a daily basis. Level components accurately with the high-quality
Illuminated Wide LOCK function High-quality vials for Art. No. ▸ Length: display contact edges optimum readability 18903 ▸ 45 cm / 19018 ▸ 80 cm
www.stabila.com 36 – 37 Laser
LASER
Saves time, saves errors, saves costs. Laser levels are essential tools of any trade in construction due to their high level of accuracy and functionality. Combined with a receiver, rotation lasers are particularly suitable for accurate levelling over long distances. Point and line lasers, on the other hand, are frequently used at close range for direct work on visible laser lines and points.
Overview of pictograms
Measuring range Rotation function, Protection class Right angle (90°) 20 m of visible line horizontal
Line function, Rotation function, Levelling accuracy Point function ± 0,1 mm/m horizontal vertical
Working area for Line function, Plumb-line function Inclination function Ø 800 m set receiver vertical
www.stabila.com 38 – 39 Rotation lasers