02.07.2020 NX-Schematics & NX-Routing 1 Agenda
• Who am I (not so important) • Intro • The big picture of development • The environment and relationships • The Products • NX-Schematics & NX-Routing • The Customers • A small customer overview • NX-Schematic • What is it • Where is it being used • The unique integration • How did this unique "market leading solution" come about • Reasons why you should use NX-Schematic • The logic • NX-Routing • What is it • Where is it being used • Advantaged from NX-Routing together with NX-Schematic • NX-Schematic & NX-Routing • TC Structure • The Process • NX-Schematic is unique • Important for sales • Live Presentation (also Films) • Create a Schemata «general process» (also Film) • Create a Routing from Schematic (also Film) • Create an associative Routing from Schematic (also Film) • ANT & TC Structures (also Films)
02.07.2020 NX-Schematics & NX-Routing 2 Who I am Cad-OasEs Int. GmbH More than 30 years of NX experience www.oases.ch • Ex employee of McDonnell Douglas / EDS von McDonnell Douglas & EDS Roland Hofmann • 10 Years EDS Distributor in Perth AUS
Lettenstrasse 7 - Postfach 446 More than 20 years NX Schematics & NX CH 6343 Rotkreuz ZG Routing experience ( this is my world )
• Specialist in NX Schematics . NX / UNIGRAPHICS Partner of: . NX from A - Z • Specialist in NX Routing . NX Schematics Siemens Switzerland . NX Routing Mechanical Siemens Germany • Projects and Customers around the Globe . NX Routing Electrical Siemens Italy . NX Large Assemblies Siemens Turkey Siemens Singapore Part of LTX / Canada . TEAMCENTER Siemens India Siemens Mexico
2/07/2020 NX-Schematics & NX-Routing 3 The Big Development Picture
02.07.2020 NX-Schematics & NX-Routing 4 The Environment / The Partners
NX Schematics is an LTX product and marketing and distributed only by Siemens
NX schematics is developed and supported by LTX Software Inc. & CAD-OasEs int. GmbH
Installation / Setup / Training Division
LTX in 1992 was one of the first Alliance partner of Siemens
Partner of: 20 Jahre Siemens Switzerland Siemens Germany Siemens Italy Siemens Turkey Siemens Singapore Siemens India Siemens Mexico
02.07.2020 NX-Schematics & NX-Routing 5 The Products
Both NX Schematics and Routing are marketed by Siemens and can be purchased only through Siemens or their marketing partners.
Both products run under Siemens maintenance.
NX schematics is developed NX routing is developed and supported by LTX Canada and supported by Siemens & CAD-OasEs int. GmbH
2020-07-02
NX-Schematics & NX-Routing 6 Aeronautical Customers
02.07.2020 NX-Schematics & NX-Routing 7 Space Customer
02.07.2020 NX-Schematics & NX-Routing 8 Military Customers
02.07.2020 NX-Schematics & NX-Routing 9 Household Customers
Bei BSH wird Mentor für den PCB Design Bereich gebraucht
Deutschland / Frankreich / Spanien / Indien China / Türkei / Russland / USA / Slowenien Polen
02.07.2020 NX-Schematics & NX-Routing 10 Medical Customers
NX-Schematics – NX-Routing – TC – Agile – SAP
Durchgehender Prozess mit allem was benötigt wird.
Bei Agilent wird Mentor für den PCB Design Bereich gebraucht
02.07.2020 NX-Schematics & NX-Routing 11 Vehicle Building Customers
02.07.2020 NX-Schematics & NX-Routing 12 Vehicle Building Customers
02.07.2020 NX-Schematics & NX-Routing 13 Maritim Customers
02.07.2020 NX-Schematics & NX-Routing 14 Industrial Customers
02.07.2020 NX-Schematics & NX-Routing 15 NX-Schematics
NX NX NX Schematics Routing
Microsoft CSV Teamcenter Office PLMXML
Siemens Produkt
02.07.2020 NX-Schematics & NX-Routing 16 What can you do with NX-Schematics
Any hydraulic Schematic Any electrical Schematic
Any Layout Any mechanical Schematic
7/2/2020 NX-Schematics & NX-Routing 17 The Integration
Direct from Schematics
NX-Routing Electrical
NX-Routing Mechanical
7/2/2020 NX-Schematics & NX-Routing 18 How did this unique Solution started
The Programmers
The Practice
About 15 year ago if started the whole thing together with the programmers from LTX. Today we have solution that nobody else has (not even close to it). We keep are develop and enhance the system day by day based on the customers demand.
7/2/2020 NX-Schematics & NX-Routing 19 Why should you use Schematics ?
Every System has its place in the industry
The Question is:
1. Does everybody need a Rolls Royce ?
2. De we really need a Porsche Cayenne ?
3. Or would a simple BMW 3 Series do the job
7/2/2020 NX-Schematics & NX-Routing 20 Why should you use Schematics ?
02.07.2020 NX-Schematics & NX-Routing 21 Why should you use Schematics ?
02.07.2020 NX-Schematics & NX-Routing 22 Common sense
02.07.2020 NX-Schematics & NX-Routing 23 Why should you use Schematics ?
There was a statement from the CEO «Mr. Bubeck» by the Dornier company:
"In the entire design process, we have only 1 interface, Teamcenter to SAP "
otherwise we make everything from within one System.
Unfortunately nobody believed it, but it is the truth
7/2/2020 NX-Schematics & NX-Routing 24 One 3D model and multiple instance in TC and ERP
Each part has it's own material number on the assembly level which comes from Schematics
This material Number is then transferred to the TC instance attribute AIE_OCC_ID.
This approach can save hundreds of 3D models in Teamcenter, saving a huge amount of time and money.
02.07.2020 NX-Schematics & NX-Routing 25 ANT structures in the TC environment We create full TC structure of parts that are in Schematics but are never placed in the 3D routing.
Only 2D without 3D Routing 3D Routing (Native and TC) (Native and TC)
02.07.2020 NX-Schematics & NX-Routing 26 Save lists directly in TC
If NX is already in use, nothing in the PLM must be adapted to the environment. All your processes work without any adjustment
Press a Button drops list into Teamcenter
• BOM • Connection Lists
7/2/2020 NX-Schematics & NX-Routing 27 Why should you use Schematics ?
There are two methods to work within Schematics
Single User Multi Users Item 4712 Item 4711
Item 4713
Nothing extra is needed here. MPM is uses
7/2/2020 NX-Schematics & NX-Routing 28 Option & Variation "Simple Handling"
Complete definition "Everything"
The new MPM function in NX-Schematics gives you everything you ever needed !
02.07.2020 NX-Schematics & NX-Routing 29 ANT / BOM Structure
No matter if you only do 2D schemes or your process goes right into the 3D routing and form board, you get a full ANT Bom structure at every level.
2D Schematics 3D Routing 2D Formboard
02.07.2020 NX-Schematics & NX-Routing 30 Why is "Schematics" your System
• Top E-CAD System with worlds best integration • Best ROI • No additional Database • No additional Interface • No Export / Import of Data • Simple Handling • Changes are easy in Schematics and Routing • All within one system • One Contac Person for all • All direct in the PLM (Teamcenter) • No changes of your existing process • Get your needed functionality quick and easy
7/2/2020 NX-Schematics & NX-Routing 31 NX-Routing
Electrical Routing
Mechanical Routing
7/2/2020 NX-Schematics & NX-Routing 32 Where is NX Routing used
In all Industries
7/2/2020 NX-Schematics & NX-Routing 33 The Process
2D Schematics: 3D Routing: NX Schematics is the leading system. 3D Routing is easy and very fast directly That means, all you define here is valid in Routing No Export / Import of Data from Schematics. And can be used and outputed.
Native Full associative Items Bidirectional Function
Important: The whole process is based on Data pull process.
7/2/2020 NX-Schematics & NX-Routing 34 The Process (what is possible in Schematics ?)
Add ons Terminals Cables (Order) (No-Order)
Cavity Seals Wires (Order) (No-Order) Plugs
Wire Seals Cable/Wire Markings
Solder Sleeve Pig-Tail Backshells Jumper
7/2/2020 NX-Schematics & NX-Routing 35 The Process (what is possible in Schematics ?)
Any kind if shielding
Any kind of device
Quadrax Pin
7/2/2020 NX-Schematics & NX-Routing 36 The Process (what is possible in Schematics ?)
Cable Diameter
Cable Weight
Calculation of Length and Cut Length (Cable and Wires)
Calculate the Weight including:
Minimum • Terminals Bend • Cavity Seal Radius • Backshell
Feed back to Schematics
7/2/2020 NX-Schematics & NX-Routing 37 The Process (what is possible in Schematics ?)
All Schematics Attributes of Devices, Cables, Wires, Unconnected Terminal and Cavity Seals Terminals, Cavity Seal, Backshells, Cable Markers, are still in the BOM (if they need to be etc. are handed over 1: 1 to the 3D connector models, ordered) if they need to be ordered cables and wires. although NX only displays connections that are also connected
We produce accurate cables and harness structures in 3D routing, 1:1 as in the Schematics (not possible with * .hrn files)
7/2/2020 NX-Schematics & NX-Routing 38 The Process (what is possible in Schematics ?)
Bidirectional Connection
No Export No Import
You can check the 3D Routing wiring Schematics is the leading system. at any time against the schematics and vice-versa.
Changes in the schematic can also be made in Routing, because of the direct connection.
7/2/2020 NX-Schematics & NX-Routing 39 The Process (what is possible in Schematics ?)
Experience solves most of the Problems
Harness Structure ?? Not possible (With User Input Or full automatic
7/2/2020 NX-Schematics & NX-Routing 40 Teamcenter Structure
All data directly from Schematics
Elektro-Routing
Mechanical-Routing
Elektro-Routing MPM
Mechanical-Routing MPM
Damit werden auch die MPM Freigegeben
7/2/2020 NX-Schematics & NX-Routing 41 The Process
Admin Training
NX-Schematics 3 Days NX-Routing 2 Days
User Training (if a workable environment exists)
NX-Schematics 2 Days
User Knowledge / Know-How NX-Gateway / NX-Drafting
NX-Routing 3 Days
User Knowledge / Know-How NX-Gateway / NX-Modeling NX-Assemblies / NX-Drafting
To work efficient in the NX-Routing environment The handling of large assemblies is very important.
02.07.2020 NX-Schematics & NX-Routing 42 NX – Schematics is unique
Datenbank Systeme *.plmxl Data exchange *.hrn Data exchange No Data exchange because ! NOT Bidirectional ! We are working within the same environment talking the same language
! Bidirectional !
In the area of electrical Schemata, NX-Schematic can do exactly the same (if not more) than the other database related E-Cad systems, but without an additional database and interface.
NX-Schematic talkes the same language like NX.
02.07.2020 NX-Schematics & NX-Routing 43 The Sales and the Siemens SW rail
If the customer wants Mentor Capital for 3D cabling then he should take mentor. NX30148 NX30149 But if Mentor is too powerful and or too expensive to make his NX30153 3D cabling, you have two options. NX30154 You know NX30158 this Prices Offer NX-Schematics and let the customer stay within NX30160 better than Anybody The Siemens NX universe. NX33000 else Or you allow him to purchase and use a competition product like
SI2800
You know this Prices better than Anybody and he leaves the Siemens Product else universe. (Not Integrated at all) 02.07.2020 NX-Schematics & NX-Routing 44 The ANT and TC Structures
2D environment (Native) 2D environment (TC) (without Routing) (without Routing)
3D environment (Native) 3D environment (TC) (with Routing) (with Routing)
02.07.2020 NX-Schematics & NX-Routing 45 Online Presentation
Presentation on the System
Schematics Routing 1 2
The process from beginning: The process with existing parts:
1. Explanation of the Software and environment 1. Attach Schematic Information 2. Create a small schematic 2. Create stock 3. Create the 3D Routing 3. Change Schematic and update Routing 4. Change Schematic and Update Routing 4. Bidirectional Data 5. Bidirectional Data
02.07.2020 NX-Schematics & NX-Routing 46 Thank you very much
02.07.2020 NX-Schematics & NX-Routing 47 Q & A
Do you have any questions ?
02.07.2020 NX-Schematics & NX-Routing 48