www.whitesdiving.com www.whitesdiving.com

CONTAMINATED WATER DRYSUITS HAZMAT PS and HAZMAT COM Contaminated Water Diving DrySuits

ENVIRO AND ENVIRO HYBRID Moderately Contaminated Water DrySuits

UNDERGARMENTS For all professional divers

www.whitesdiving.com www.whitesdiving.com HAZMAT PS DRYSUIT (PUBLIC SAFETY HAZMAT DIVER)

FEATURES Ptar No. 611983 • Chemical resistant polyurethane inside and out HAZMAT PS - MTO (MADE TO • Interior and exterior tape welded seams ORDER) • Tear and puncture resistant nylon core COLOR: RED/BLACk • Comfort with 7mm liner Part No. 611984 • Permanently attached dry rings with replaceable Polytex wrist seals HAZMAT PS - MTM - (MADE TO • Contaminated water dual exhaust valve & standard inlet inflation valve MEASURE) • Attached Polytex and neckseal COLOR: RED/BLACK

• Optional SLT system Part No. 611985 • Easy to clean and decontaminate HAZMAT PS - MTO (MADE TO • Includes hood liner, internal , inflator ORDER) hose, repair kit and a drysuit bag COLOR: BLACk Part No. 611986 Complete list of chemical testing available upon request HAZMAT PS - MTM - (MADE TO MEASURE)) SIZES COLOR: black XS, S, SK, M, MT, MK, L, LT, LK, XL, XLK, 2XL, 3XL, 4XL See online size chart for size specific measurements.

Whites Hazmat Multi-Laminate Fully sealed chemically resistant polyurethane Interior and exterior tape welded seams Tear and puncture resistant nylon core Outer fully sealed washable, chemically resistant polyurethane layer HAZMAT COM DRYSUIT (COMMERCIAL HAZMAT DIVER)

Diver in Whites Hazmat COM, FEATURES Gorski G2000SS , Aqua-Lung • Chemical resistant Polyurethane inside and out H3 Commercial Diver Harness, • Interior and exterior tape welded seams Rocket II Fins • Tear and puncture resistant nylon core ALL AQUA LUNG PRODUCTS • Heavy duty attached poly boots • Permanently attached dry glove rings with replaceable Polytex wrist seals • Contaminated water dual exhaust valve & standard inlet inflation valve • comes with choice of attached helmet yoke: • Gorski G2000SS Ptar No. 611987 • Kirby Morgan - All HAZMAT COM - MTO (MADE TO • Miller ORDER) • Desco Airhat COLOR: RED/BLACK

• Easy to clean and decontaminate Part No. 611988 • Includes internal suspenders, inflator HAZMAT COM - MTM - (MADE TO MEASURE) hose, repair kit and a drysuit bag COLOR: RED/BLACK

Complete list of chemical testing available upon request Part No. 611989 HAZMAT COM - MTO (MADE TO ORDER) SIZES COLOR: black XS, S, SK, M, MT, MK, L, LT, LK, XL, XLK, 2XL, 3XL, 4XL Part No. 611990 See online size chart for size specific measurements. HAZMAT COM - MTM - (MADE TO MEASURE) COLOR: black www.whitesdiving.com www.whitesdiving.com ENVIRO DRYSUIT

The Enviro drysuit is used by divers working in Moderately Ptar No. 611216 Contaminated Water (MCW) scenarios including biologically ENVIRO - MTO (MADE TO ORDER) contaminated water and vehicle recoveries. It is designed for the COLOR: RED professional diver who needs a drysuit that can be thoroughly Part No. 612215 cleaned but at an economical price. ENVIRO - MTM (MADE TO MEASURE) COLOR: RED FEATURES • Chemical resistant polyurethane outer surface Part No. 611355 • Exterior tape welded seams ENVIRO - MTO (MADE TO ORDER) COLOR: Black • Tear and puncture resistant nylon inner • Comfort boots with 7mm liner Part No. 611354 • Permanently attached dry glove rings with ENVIRO - MTM (MADE TO MEASURE) COLOR: Black replaceable Polytex wrist seals • Standard exhaust valve & standard inlet inflation valve • Attached Polytex hood and neckseal • Includes hood liner, internal suspenders, inflator hose, repair kit and a drysuit bag

SIZES XS, S, SK, M, MT, MK, L, LT, LK, XL, XLK, 2XL, 3XL, 4XL

Whites Enviro BI-Laminate Tear and puncture resistant nylon interior Outer fully sealed washable, polyurethane layer Smooth exterior seams

ENVIRO Hybrid DRYSUIT

FEATURES • HazMat Multi-Laminate bottom for superior Ptar No. 612214 puncture and abrasion resistance ENVIRO Hybrid - MTO (MADE TO • Enviro Bi-Laminate for superior ORDER) COLOR: RED mobility and flexibility • Chemical resistant polyurethane outer surface Part No. 612216 • Top of suit has exterior tape welded seams (see Enviro) ENVIRO Hybrid - MTM (MADE TO MEASURE) • Bottom has interior and Exterior COLOR: RED welded seams (see HazMat) • Tear and puncture resistant nylon inner Part No. 612215 ENVIRO Hybrid - MTO (MADE TO • Comfort boots with 7mm liner ORDER) • Permanently attached dry glove rings COLOR: Black with replaceable Polytex wrist seals • Standard exhaust valve & standard inlet inflation valve Part No. 612217 ENVIRO Hybrid - MTM (MADE TO • Attached Polytex hood and neckseal MEASURE) • Includes hood liner, internal suspenders, COLOR: Black inflator hose, repair kit and a drysuit bag

SIZES XS, S, SK, M, MT, MK, L, LT, LK, XL, XLK, 2XL, 3XL, 4XL See online size chart for size specific measurements. www.whitesdiving.com www.whitesdiving.com Thermal Fusion

Size 2XS/XS S/M L/XL 2XL/3XL 4XL+

Part No. 612082 612083 612084 612085 612086

Features • Thermal Fusion is ideal for use with all dry Materials • Integrated hand-warming pockets • Polartec Power Stretch Pro outer skin • Easy access comfort zip with P-Valve compatibility • Polartec 200 fleece core • Compression Skin encapsulates the inner Thermal • Machine washable Core, delivering extreme mobility and superior warmth • Whites ATS (Air Transfer System) facilitates the SIZES effective transport of air throughout the suit 5 Stock sizes only: 2XS/XS, S/M, L/XL, 2XL/3XL, 4XL+ • Strategically placed 3D Hi-Flo Mesh Panels located at the inflate and bicep exhaust valve locations increases airflow, padding and insulation • Thermal independently lab tested by Sport Innovation Center (SPIN) • Superior insulation value validated by comparative testing • Thumb loops and stirrups for easy donning

MK2 One Piece Undergarment

GLACIER MK2 NYLON/FLEECE ONE PIECE W/REMOVABLE SLEEVES

Size XS S ML XL 2XL 3XL

Part No. 611708 611704 611702 611700 611706 611697 611699

Features MATERIALS (ONE PIECE AND ) • Removable sleeves • Breathable, moisture wicking, high loft, • Add the MK2 Jacket, MK1 or MK0 for insulating polypropylene Polar Fleece lining colder conditions • StormProof 70 denier micro-ripstop water • 2 zippered vertical chest pockets resistant Taslon nylon outer shell • 2 fleece-lined hand warming pockets • Thumb loops and foot stirrups SIZES (ONE PIECE AND JACKET) • Non-corroding YKK throughout 7 Stock sizes only: XS, S, M, L, XL, 2XL, 3XL • 2-way zippered rear convenience panel • 2-way torso entry/relief • 2-way stretch expansion panels at and knees MK2 JaCKET Undergarment

GLACIER MK2 NYLON/FLEECE JACKET W/REMOVABLE SLEEVES & HOOD

Size XS S ML XL 2XL 3XL

Part No. 611694 611690 611688 611686 611692 611683 611685

Features • As for MK2 One Piece Undergarment plus • Storm Shield face guard with fleece liner • Zip-off Storm Hood with adjustable • Lycra internal hood flap with cinch- ladder locks and stretch cords tight adjustable face seal www.whitesdiving.com MK0 Undergarment

GLACIER MK0 ONE PIECE

Size XS S ML XL 2XL

Part No. 611651 611649 611648 611647 611650 611646

Features MATERIALS • Breathable, moisture-wicking, Bamboo blend • Enviromentally friendly production process • Additional Spandex content results in • Additional spandex content results in extreme stretch; no need for king sizes extreme stretch for a better fit • Smooth Lycra stirrups & Elastic Thumb Loops • Rear convenience flap Sizes • 2-way torso entry/relief zipper Stock sizes only: XS, S, M, L, XL, 2XL • Non-corroding YKK zippers • Designed as a wicking base layer or a primary layer in warm tropical waters (above 70 °F / 21 °C)

MK1 Undergarment

GLACIER MK1 ONE PIECE

Size XS S ML XL 2XL

Part No. 611680 611676 611674 611672 611678 611670

FEATURES • Designed as a wicking base layer • Breathable, moisture-wicking or a primary layer in warm tropical polypropylene Micro Fleece waters (above 70 °F / 21 °C) • Spandex content results in extreme Materials stretch; no need for king sizes • Breathable, moisture wicking • Smooth Lycra stirrups & polypropylene MicroFleece Elastic Thumb Loops • Easy care • Rear convenience flap • 2-way torso entry/relief zipper SIZES • Non-corroding YKK zippers Stock sizes only; XS, S, M, L, XL, 2XL

MK3 THERMAL Size 4/5 6/7 8/9 10/11 12/13 14/15 Foull pr duct details Part No. 611632 611633 611634 611629 611630 611631 available online at: FEATURES • Extreme cold water • Complements the MK2 Undergarment • Breathable, moisture-wicking, fleece inner lining • Ripstop water-resistant outer nylon facing • Reinforced sole and heel for durability • Worn alone or with a light polyester sock www.whitesdiving.com sizes: 4/5, 6/7, 8/9, 10/11, 12/13, 14/15 www.whitesdiving.com www.whitesdiving.com Drysuit options SEALS AND GLOVES HOODS AND YOKES BOOTS AND SOCKS

SLT Neck Ring A ttACHEd hood Comfort Boots System Protects ears and Tough Rubber Sole Allow for field head from unwanted with Fin Keeper; replacement of contaminates excellent comfort neckseal and hood in with additional minutes without glue. warmth (7mm liner)

Wrist Rings - Round Dry rings allow the Steel Toed use of dry gloves; Boots User replaceable Fleece hood Excellent traction wrist seals Liner with steel toe & Provides thermal shank – approved to protection to the ASTM chemical tests. hood while wearing HazMat suit only an attached polytex hood. Heavy Duty Wrist Rings - Heavy Duty “grip” Oval sole for unmatched A lower profile of the traction. HazMat suit round wrist ring while HazMat Yokes only still allowing for dry Yokes available for gloves. the following helmets: • Gorski G2000SS Multi-Laminate Shell Sock • Kirby Morgan - All Multi-Laminate helmets Shell Sock • Miller Made of the same • Desco Airhat material as the suit. EZ-On Dry Socks mate Glove perfectly can be stretched with EVO 3 boots over the drysuit wrist Pockets ring for easy donning Matrix Base E VO 3 Boots an excellent seal Plate & Pockets The EVO 3 boot Matrix Plate allows was designed for multiple pocket use on wet, slippery Relief Zipper styles to be attached decks, wearing fins Allows divers to and substituted and operating on relieve themselves at wet rocky shores. the surface without Use with Multi- doffing their drysuit Laminate Shell Socks

Whites Manufacturing Ltd. Tel 1-250-652-8554 Toll-Free 1-866-652-8556 6820 Kirkpatrick Crescent Fax 1-250-652-8553 Saanichton BC V8M 1Z9 Canada www.whitesdiving.com