DDX6021BT DDX6051BT DDX4021BT DDX4051BT DDX3021 DDX3051
MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL
© 2011 JVC KENWOOD Corporation LVT2269-001A (EN/QN)
LVT2269-001A_EQ_cover.indd 2 11/11/22 15:47 Contents Before use ...... 3 Changing the display design ...... 35 How to reset your unit ...... 3 Setting for video playback ...... 37 Picture adjustment ...... 37 INTRODUCTIONS Changing the aspect ratio ...... 38 Initial Settings ...... 5 Zooming picture ...... 38 Initial setup ...... 5 Using a rear view camera ...... 39 Adjusting the panel angle ...... 5 Setting menu items ...... 40 Updating the system ...... 6 Memorizing/recalling the settings ...... 44 Setting the security function ...... 7 Locking the settings ...... 44 Component names and Adjusting the touch position ...... 44 functions ...... 8 Setting the clock ...... 10 BLUETOOTH OPERATIONS Common operations ...... 11 (Only for DDX6021BT/DDX6051BT/ Turning on the power ...... 11 DDX4021BT/DDX4051BT) Turning off the power ...... 11 Information for using Bluetooth® Adjusting the volume ...... 11 devices ...... 45 Putting the unit in standby ...... 11 Bluetooth operations ...... 45 Turning off the screen ...... 11 Connecting Bluetooth devices ...... 46 Switching screens ...... 12 Using the Bluetooth mobile phone ...... 48 Using the Bluetooth audio player ...... 53 AV SOURCE OPERATIONS Bluetooth device settings ...... 53 Selecting the playback source....13 Displaying the source control screen ...... 13 USING THE REMOTE Disc operations ...... 14 CONTROLLER Playing a disc ...... 14 Overview ...... 55 Playable disc types...... 15 Operations from the remote Playback operations ...... 16 Settings for disc playback ...... 20 controller ...... 56 USB operations ...... 21 REFERENCE Playing a USB device ...... 21 Maintenance ...... 60 Listening to the iPod/iPhone More about this unit ...... 61 device ...... 23 Troubleshooting ...... 63 iPod/iPhone playback operations ...... 24 Selecting a track/video from menu on the Accessories/Installation iPod/iPhone ...... 25 Procedure ...... 67 Operating in iPod/iPhone control mode ...25 Connecting Wires to Terminals ...69 Listening to the radio ...... 26 Connecting a USB device/iPod/ Using other external iPhone ...... 70 components ...... 31 Connecting Other Products ...... 71 AV-IN ...... 31 Installing/Removing the Unit .....72 Using the external navigation unit ...... 32 Specifications ...... 74 Sound adjustment ...... 33 KS-UBT1 (USB Bluetooth Using the sound equalization ...... 33 Adapter) ...... 77 Adjusting the cross over frequency ...... 34
2 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 2 11/11/28 10:08 Before use WARNINGS: Temperature inside the car... (To prevent accidents and damage) If you have parked the car for a long time • DO NOT install any unit or wire any cable in in hot or cold weather, wait until the a location where; temperature in the car becomes normal – it may obstruct the steering wheel and before operating the unit. gearshift lever operations. – it may obstruct the operation of safety How to reset your unit devices such as air bags. DDX6021BT/DDX6051BT – it may obstruct visibility. • DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look around carefully. Reset button • The driver must not watch the monitor DDX4021BT/DDX4051BT/DDX3021/DDX3051 while driving. Cautions on the monitor: • The monitor built in this unit has been Reset button produced with high precision, but it may have some ineffective dots. This is If the unit fails to operate properly, press inevitable and is not considered defective. the Reset button. The unit returns to factory • Do not expose the monitor to direct settings when the Reset button is pressed sunlight. (except the registered Bluetooth devices). • Do not operate the touch panel using a ball-point pen or similar tool with the sharp How to read this manual: tip. • Illustrations of DDX6021BT are mainly Press the buttons on the touch panel with used for explanation. your finger directly (if you are wearing a • This manual mainly explains operations glove, take it off). using the buttons on the monitor panel • When the temperature is very cold or very and touch panel. For operations using the hot... remote controller (RC-DV340: supplied only for DDX6021BT/DDX6051BT), ☞ page – Chemical changes occur inside, causing 55. malfunction. • < > indicates the variable screens/ – Pictures may not appear clearly or menus/operations/settings that appear may move slowly. Pictures may not on the touch panel. be synchronized with the sound or • [ ] indicates the buttons on the touch picture quality may decline in such panel. environments. • Indication language: English For safety... indications are used for the purpose • Do not raise the volume level too much, of explanation. You can select the as this will make driving dangerous by indication language from the
EN_LVT2269-001A_EQ.indb 3 11/11/28 10:08 This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Declaration of Conformity with regard to the EMC Directive 2004/108/EC Information on Disposal of Old Electrical Manufacturer: and Electronic Equipment and Batteries JVC KENWOOD Corporation (applicable for EU countries that have 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, adopted separate waste collection Kanagawa, 221-0022, Japan systems) EU Representative’s: Products and batteries with the Kenwood Electronics Europe BV symbol (crossed-out wheeled bin) Amsterdamseweg 37, 1422 AC UITHOORN, The cannot be disposed as household Netherlands waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
The marking of products using lasers
CLASS 1 LASER PRODUCT
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit
4 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 4 11/11/28 10:08 INTRODUCTIONS Initial Settings Initial setup Adjusting the panel angle When you power on the unit for the first time (Only for DDX6021BT/DDX6051BT) or reset the unit, the initial setting screen You can change the panel angle. appears. • You can also change the settings on the 1 Select an angle (0 – 6).
To set the current position as the power off position, select
English 5
EN_LVT2269-001A_EQ.indb 5 11/11/28 10:08 Updating the system 4 You can update the system by connecting a USB device containing the update file. 1 Create an update file, copy it to a USB device, and connect it to the unit. To connect a USB device, ☞ page 70 . 2 On
* If the update has failed, turn the power off and then on, and retry the update. * Even if you have turned off the power during update, you can restart the update after the power is turned on. The update will be performed from the beginning.
3
6 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 6 11/11/28 10:08 Setting the security function 2 Enter a four-digit number (1), You can set a security code to protect your then confirm the entry (2). receiver system against theft. Deletes the last entry Registering the security code 1 Display the security code setting screen. On
Cancels the setting
3 Repeat step 2 to confirm your security code. Now, your security code is registered.
• When the unit is being reset or disconnected from battery, you are required to enter the security code. Enter the correct security code, then press [Enter]. Activating the security function You can activate the security indicator to protect your receiver system against theft. On
• To clear the registered security code, perform step 1 and press [CLR] in
To cancel, select
English 7
EN_LVT2269-001A_EQ.indb 7 11/11/28 10:08 Component names and functions DDX6021BT/DDX6051BT Screen (Touch panel) Monitor panel
1 Reset button/Power indicator/Security 6 AV button (Press) indicator • Displays the current source screen. • Resets the unit. (☞ page 3) AV OUT button (Hold) • Lights up while the unit is turned on. • Selects the AV source for external • Flashes when the security function is monitor or amplifier. activated. (☞ page 7) 7 MENU/ button 2 ATT button (Press) • Turns off the power. (Hold) • Attenuates the sound. • Turns on the power. (Press) V.OFF button (Hold) • Displays the
8 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 8 11/11/28 10:08 DDX4021BT/DDX4051BT/DDX3021/DDX3051
6 AV/AV OUT button • Displays the current source screen. (Press) • Selects the AV source for external monitor or amplifier. (Hold) 7 For DDX4021BT/DDX4051BT: TEL/V.OFF button • Displays the
Caution on volume setting: Digital devices (CD/USB) produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output You can change the color of the buttons level. on the monitor panel. (☞ page 35)
English 9
EN_LVT2269-001A_EQ.indb 9 11/11/28 10:08 Setting the clock 1 Display
clock time with the 2 Display
1 Adjust the hour 2 Adjust the minute [Reset]: Sets the minute to “00.” Example: 3:00 – 3:29 = 3:00 3:30 – 3:59 = 4:00 5 Finish the procedure.
* Appears only when the navigation unit is connected.
10 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 10 11/11/28 10:08 Common operations Turning on the power Putting the unit in standby DDX6021BT/ DDX4021BT/ DDX6051BT DDX4051BT/ DDX3021/DDX3051
Turning off the power DDX6021BT/ DDX4021BT/ DDX6051BT DDX4051BT/ DDX3021/DDX3051
(Hold) (Hold)
Adjusting the volume
To adjust the volume (00 to 35) DDX6021BT/DDX6051BT Turning off the screen DDX6021BT/DDX6051BT Decrease Increase
DDX4021BT/DDX4051BT/DDX3021/ (Hold) DDX3051 Decrease Increase DDX4021BT/ DDX3021/ DDX4051BT DDX3051
To attenuate the sound DDX6021BT/ DDX4021BT/ (Hold) (Hold) DDX6051BT DDX4051BT/ DDX3021/DDX3051
The screen is turned off. To turn on the screen, press MENU/ .
The ATT indicator lights up. To cancel the attenuation, press the ATT button ( DDX6021BT/DDX6051BT ) or VOL/ATT knob ( DDX4021BT/DDX4051BT/DDX3021/ DDX3051 ) again.
English 11
EN_LVT2269-001A_EQ.indb 11 11/11/28 10:08 Switching screens
Source control screen
* Appears only when Displays the navigation screen. * a navigation unit is (☞ page 32) connected.
You can select 3 items to be displayed in this area. (☞ page 13) Changes the page
☞ page 11
Press [ ] to return to the previous screen. Touch screen operation Displays the video control menu while playing a video.
Goes to the previous Goes to the next chapter/ chapter/track.* track.*
Displays the source control screen while playing a video. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds. * Not available for video from an external component and rear view camera.
12 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 12 11/11/28 10:08 AV SOURCE OPERATIONS Selecting the playback source
*1
*2
NAV*3 (☞ page 32) Displays the navigation screen when a navigation unit is connected. DISC (☞ page 14) Plays a disc. TEL * 4 (☞ page 49) Displays the Bluetooth mobile phone setting screen. USB (☞ page 21) Plays files on a USB device. iPod * 5 (☞ page 23) Plays an iPod/iPhone. TUNER (☞ page 26) Switches to the radio broadcast. AV-IN 1/AV-IN 2 * 5 (☞ page 31) Switches to an external component connected to AV-IN input terminal. Bluetooth*4 (☞ page 53) Plays a Bluetooth audio player.
*1 You can select 3 items to be displayed in this area. (☞ page 41) *2 Switches between the previous and next pages. *3 When no navigation unit is connected, “No Navigation” appears. *4 Only for DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT . * 5 Select an appropriate input setting on
(Hold)
• For DDX6021BT/DDX6051BT , pressing and holding TEL hides the operation buttons. For DDX4021BT/DDX4051BT/DDX3021/DDX3051 , pressing FNC/R-CAM hides the operation buttons. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.
English 13
EN_LVT2269-001A_EQ.indb 13 11/11/28 10:08 Disc operations Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. Inserting a disc To eject a disc DDX6021BT/DDX6051BT DDX6021BT/DDX6051BT
Label side DDX4021BT/DDX4051BT/DDX3021/DDX3051
• You can eject a disc when playing another AV source. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to DDX4021BT/DDX4051BT/DDX3021/DDX3051 protect it from dust. When removing a disc, pull it horizontally. Label side Closing the monitor panel (For DDX6021BT/DDX6051BT ) After removing the disc, press the eject button again. The monitor panel closes.
The source changes to “DISC” and playback starts. • The IN indicator lights up while a disc is inserted.
• If “ ” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “ ,” operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo.
14 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 14 11/11/28 10:08 Playable disc types Disc type Recording format, file type, etc Playable DVD DVD-Video *1 Region Code: • For DDX6021BT/DDX4021BT/DDX3021: 2 • For DDX6051BT/DDX4051BT/DDX3051: 5 DVD-Audio/DVD-ROM DVD Recordable/ DVD-Video Rewritable DVD-VR *4 (DVD-R/-RW * 2, +R/+RW * 3) DivX/MPEG1/MPEG2 • DVD Video: UDF bridge JPEG • DVD-VR • DivX/MPEG1/MPEG2/ MP3/WMA/WAV/AAC JPEG/MP3/WMA/WAV/ MPEG4/DVD+VR/DVD-RAM AAC: ISO 9660 level 1, level 2, Romeo, Joliet Dual Disc DVD side Non-DVD side CD/VCD DTS-CD/Audio CD/CD Text (CD-DA) VCD (Video CD) SVCD (Super Video CD)/CD-ROM/CD-I (CD-I Ready) CD Recordable/ CD-DA Rewritable VCD (Video CD) (CD-R/-RW) • ISO 9660 level 1, level 2, DivX/MPEG1/MPEG2 Romeo, Joliet JPEG MP3/WMA/WAV/AAC MPEG4 *1 If you insert a DVD Video disc of an incorrect Region Code, “Region code error” appears on the screen. *2 DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not playable. *3 It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as its disc type when a +R/+RW disc is loaded. +RW double layer discs are not playable. *4 This unit cannot play back contents protected with CPRM (Content Protection for Recordable Media). Caution for DualDisc playback The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.
English 15
EN_LVT2269-001A_EQ.indb 15 11/11/28 10:08 Playback operations To display the source control screen, ☞ page 13.
For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Playing time
Media type
• DVD Video: Title no./Chapter no. • DVD-VR: Program no. (or Playlist no.)/Chapter no.*1 • DivX/MPEG1/MPEG2: Folder no./Track no. • JPEG: Folder no./File no. • VCD: Track no. ☞ page 32 File type (for DivX/MPEG1/MPEG2/JPEG) Playback mode
[ ] Selects playback mode. [1] [¡] • Reverse/forward search [ ]*2 (☞ page 19) during playback.*4 [3 8] Starts/Pauses playback. • Plays back in slow- 3 motion during pause. [7]* Stops playback. [Mode]*5 Changes the settings for [4] [¢] • Selects chapter/track. disc playback. (☞ page 20) (Press) • Reverse/forward [MENU] Displays
[ ] [ ] Selects folder. [ ] Displays folder/track list. (☞ page 17)
*1 To display the Original Program/Playlist screen, ☞ page 18. *2 Does not appear for DVD/DVD-VR/JPEG. *3 Appears only for DVD/DVD-VR/VCD. *4 Search speed varies depending on the type of disc or file. *5 Does not appear for VCD.
16 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 16 11/11/28 10:08 To display the source control screen, ☞ page 13.
For CD/MP3/WMA/WAV/AAC Track/file information • Pressing [<] scrolls the text if not all of the text is shown.
Media type
Playing time
Playback status (3: play / 8: pause ) • MP3/WMA/WAV/AAC: Folder no./Track no. ☞ page 32 File type • CD: Track no. Playback mode While playing, the jacket picture is shown if the file has the tag data including the jacket picture.
[ ] [ ] Selects playback mode. [4] [¢] Selects track. (☞ page 19) [1] [¡] Reverse/forward search.*2 [ ] *1 Displays folder/track list. [Mode] *1 Changes the settings for (☞ below) disc playback. (☞ page 20) [3 8] Starts/Pauses playback. [MENU] Displays
*1 Does not appear for CD. *2 Search speed varies depending on the type of disc or file.
Selecting folder/track on the list Plays tracks/files in the folder Changes the page Playing Recordable/Rewritable discs • This unit can recognize a total of 5000 files and 250 folders (a maximum of 999 files per folder). • Use only “finalized” discs. • This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. • Some discs or files may not be played Returns to the upper layer back due to their characteristics or Returns to the root folder recording conditions.
English 17
EN_LVT2269-001A_EQ.indb 17 11/11/28 10:08 Video menu operations [Audio] Selects the audio type. You can display the video menu screen • For DVD-VR: Selects the while watching the playback pictures on the audio channel (ST: stereo, screen. L: left, R: right). • Available items on the screen differ [Subtitle] Selects the subtitle type. depending on the types of the loaded disc and playback files. [Angle] Selects view angle. • The operation buttons disappear by [MENU] Displays the disc menu touching the screen or when no operation (DVD)/playlist (DVD-VR). is done for about 5 seconds. [T MENU] Displays the disc menu (DVD)/original program (DVD-VR). [CUR] Displays the menu/playlist/ original program item selecting screen. • [5] [∞] [2] [3]: Selects an item. – For DivX only [2] [3]: Skips back or forward by about 5 minutes. • [ENTER]: Confirms the selection. • [RETURN]: Returns to the previous screen. [Highlight] Switches to the direct menu selection mode. Press the target item to select. [Picture Displays picture adjustment • The screen for MPEG1/MPEG2 differs from Adjust] screen. (☞ page 37) the above. [Aspect] Selects aspect ratio. (☞ page 38) [ZOOM] Displays the picture size selecting screen. (☞ page 38)
18 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 18 11/11/28 10:08 Only for VCD • To deactivate the PBC function, press [7] 1 then the direct selecting buttons to select a track number. Selecting playback mode For DVD/DVD-VR 2
Selects Repeat playback mode
For VCD (without PBC)/CD/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC
Direct selecting buttons (☞ below)
Selects Random Selects Repeat [Audio] Selects the audio channel (ST: playback mode* playback mode* stereo, L: left, R: right). [Return] Displays the previous screen * You cannot activate the repeat mode and the or the menu. random mode at the same time. [MENU] Displays the disc menu. • Each time you press the button, [Picture Displays picture adjustment the playback mode changes. (The Adjust] screen. (☞ page 37) corresponding indicator lights up.) – Available items differ depending on the [Aspect] Selects aspect ratio. (☞ types of loaded disc and playback file. page 38) Indicator Playback mode [ZOOM] Displays the picture size selecting screen. (☞ page 38) C-REP Repeats current chapter. [Direct] Displays/hides the direct T-REP Repeats current title/ selecting buttons. (☞ below) program. • To select a track directly REP Repeats current track. FO-REP Repeats all tracks of the current folder. RDM Randomly plays all tracks. FO-RDM Randomly plays all tracks of current folder, then tracks of next folders.
To cancel, press the button repeatedly until the indicator disappears. – To switch between chapter/track entry and title/folder entry, press [Direct/CLR]. – When you enter a wrong number, press [Direct/CLR] to delete the last entry.
English 19
EN_LVT2269-001A_EQ.indb 19 11/11/28 10:08 Settings for disc playback
Disc Setup items Selectable setting/item Initial: Underlined Menu Select the initial disc menu language; Initial English (☞ page 62). Language Subtitle Select the initial subtitle language or erase the subtitle (OFF); Initial Language English (☞ page 62). Audio Select the initial audio language; Initial English (☞ page 62). Language Down Mix When playing back a multi-channel disc, this setting affects the signals reproduced through the front and/or rear speakers. ♦ Dolby : Select this to enjoy multi-channel surround Surround audio with Dolby Surround. ♦ Stereo : Normally select this.
For DVD/DVD-VR For Dynamic You can change the dynamic range while playing Dolby Digital Range Control software. ♦ Wide : Select this to enjoy a powerful sound at a low volume level with its full dynamic range. ♦ Normal : Select this to reduce the dynamic range a little. ♦ Dialog : Select this to reproduce the movie dialog more clearly. Screen Ratio Select the monitor type to watch a wide screen picture on the external monitor. ♦ 16:9 ♦ 4:3 LB (Letterbox) ♦ 4:3 PS (PanScan) For discs For except VCD/CD except File Type Select the playback file type when a disc contains different types of files. ♦ Audio : Plays back audio files. ♦ Still Image : Plays back JPEG files. ♦ Video : Plays back DivX/MPEG1/MPEG2 files. ♦ Audio&Video : Plays back audio files and DivX/MPEG1/MPEG2 files. • For playable file types, ☞ page 15.
For discs containing discs containing For • If the disc contains no files of the selected type, the existing files audio/video/picture files are played in the following order: audio, video, then still image.
20 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 20 11/11/28 10:08 USB operations Playing a USB device • This unit can play JPEG/DivX/MPEG1/ Cautions: MPEG2/MP3/WMA/WAV/AAC files stored in • This unit may not play back files in a a USB mass storage class device. USB device properly when using a USB • This unit can recognize a total of 5 000 files extension cord. and 250 folders (a maximum of 999 files per • USB devices equipped with special folder). functions such as data security functions • Make sure all important data has been cannot be used with the unit. backed up to avoid losing the data. • Do not use a USB device with 2 or more partitions. Connecting a USB device • Depending on the shape of the USB You can connect a USB mass storage class devices and connection ports, some USB device such as a USB memory, Digital Audio devices may not be attached properly or Player etc. to the unit. the connection might be loose. • You cannot connect a computer or • This unit cannot recognize a USB device portable HDD to the USB input terminal. whose rating is other than 5 V and exceeds • To connect a USB device, ☞ page 70 . 500 mA. When a USB device is connected... • This unit may not recognize a memory card inserted into the USB card reader. The source changes to “USB” and playback • When connecting with a USB cable, use the starts. USB 2.0 cable. • All tracks in the USB device will be played • The maximum number of characters for: repeatedly until you change the source. – Folder names : 50 characters To disconnect the USB device safely – File names : 50 characters Press [0], then disconnect the USB device • Avoid using the USB device if it might after “No Device” appears. effect driving safety. • Do not pull out and connect the USB device repeatedly while “Reading...” is shown on the screen. • Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device. • Operation and power supply may not work as intended for some USB devices. • Do not leave a USB device in the car, or expose to direct sunlight or high temperature to avoid deformation or damage to the device.
English 21
EN_LVT2269-001A_EQ.indb 21 11/11/28 10:08 To display the source control screen, ☞ page 13.
While playing, the Track/file information jacket picture is (for MP3/WMA/WAV/ shown if the file AAC) has the tag data • Pressing [<] scrolls the including the jacket text if not all of the picture. text is shown.
Playing time Playback status 3 8 ☞ page 32 ( : play / : pause )
Playback mode • MP3/WMA/WAV/AAC: Folder no./Track no. File type • JPEG: Folder no./File no.
1 2 [ ] Selects repeat playback mode. * * [ ] Displays folder/track list. • REP: Repeats current track. (☞ page 17) • FO-REP: Repeats all tracks of [3 8] Starts/Pauses playback. the current folder. [4] [¢] Selects track. Selects random playback mode. *1*2 [ ] [1] [¡] Reverse/forward search.*3 • RDM: Randomly plays all tracks. • FO-RDM: Randomly plays all [ ] [ ] Selects folder. tracks of the folder. [Mode] Changes the settings for [0] Press this button before file playback. (☞ below) disconnecting. (☞ page 21) [MENU] Displays
*1 To cancel random or repeat mode, press the button repeatedly until the indicator disappears. *2 You cannot activate the repeat mode and the random mode at the same time. *3 Search speed varies depending on the type of disc or file. Setting
22 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 22 11/11/28 10:08 Listening to the iPod/iPhone device Preparation 2
• Connect iPod/iPhone. (☞ page 70 ) • Use the following cables: – To watch the video and to listen to the music (analog): USB Audio and Video cable for iPod/iPhone—KCA-iP202 Audiobooks Selects the speed of (optional accessory) audio books. – To listen to the music (digital): USB Artwork Shows/hides the iPod Audio cable for iPod/iPhone—KCA-iP102 artwork. (optional accessory) • Select appropriate input settings on Setting
English 23 iPod/iPhone playback operations To display the source control screen, ☞ page 13. • Select “iPod” as the source. (☞ page 13) • The operations explained in this manual are under the condition when the unit is selected for controlling playback. (☞ below)
Song/video information While playing, • Pressing [<] scrolls Artwork (the the text if not all of picture displayed the text is shown. on the screen Playing time of iPod/iPhone) is shown if the song contains the Artwork.*1 Playback status (3: play / 8: pause )
☞ page 32 Playback mode
[MENU] Displays
*1 For changing the Artwork display setting, ☞ • When you turn on this unit, the iPod/ page 23. iPhone is charged through the unit. *2 To cancel random or repeat mode, press the • The text information may not be displayed button repeatedly until the indicator disappears. correctly. Not available in iPod control mode. (☞ page 25) *3 You cannot resume playback for video sources. *4 When using iPod nano (1st Generation) or iPod with video, you can control playback only from the unit.
• For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or is slow, reset your iPod/iPhone. • For the latest compatible list and software version of iPod/iPhone, see: www.kenwood.com/cs/ce/ipod
24 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 24 11/11/28 10:08 Selecting a track/video from Operating in iPod/iPhone menu on the iPod/iPhone control mode 1 You can play back the audio/video using iPod/iPhone itself instead of the unit.
Audio:
2 Select the menu (Music or Video) (1), a category (2), then a desired item (3). • Select the item in the selected layer until a desired track starts playing. Music menu: Video: Switches between Music ( ) and Video ( )
• When you are using Garmin StreetPilot® Onboard, the screen appears. For Garmin StreetPilot® Onboard for iPhone, visit the Returns to the previous layer Garmin web site: www.garmin.com Returns to the top layer Garmin App: Video menu: Switches between Music ( ) and Video ( )
• The current position of your vehicle appears on the map. When the vehicle runs, the map scrolls. • Available categories differ depending on • The screens of the iPhone and unit are the type of your iPod/iPhone. not the same. • To return to the normal mode, press [APP].
English 25
EN_LVT2269-001A_EQ.indb 25 11/11/28 10:08 Listening to the radio
Text information
Scrolls the text information
Standby reception indicators (☞ page 29) RDS indicator EON indicator: ☞ page 32 Lights up when a LO.S indicator ST indicator Radio Data System (☞ page 27) AF indicator (☞ page 30) station is sending Seek mode indicator EON signals.
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. [P1] – • Turns in the preset station. [PTY]* Enters FM Radio Data System [P6] (Press) program search mode. • Presets the currently tuned (☞ page 28) station. (Hold) [AM] Selects AM band. [Mode] Displays tuner setting screen. [FM] Selects FM band. (☞ page 27) [TI] Activates/deactivates TI standby reception mode. [SEEK] Changes the seek mode. (☞ page 29) • AUTO1: Auto Search [Mono]* Activates/deactivates • AUTO2: Tunes in stations monaural mode for better FM in memory one after reception. (Stereo effect will another. be lost.) • MANU: Manual Search • The MONO indicator lights [4] Searches for a station. up while monaural mode is [¢] • The search method differs activated. according to the selected [Text] Displays/hides the seek mode (☞ above) information of the current [MENU] Displays
* Appears only when FM is selected as the source.
26 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 26 11/11/28 10:08 Displaying the information of the Storing stations in memory current station You can preset six stations for each band. Automatic presetting— AME (Auto Memory) 1
2
(Hold) The station frequency Displays the text currently tuned in/PS information (station name) for FM Radio Data System when PS signal Preset list is coming in
Local stations with the strongest signals are To tune in FM stations only with strong searched and stored automatically. signals — Local Seek Manual presetting 1 1 Tune in to a station you want to preset. (☞ page 26) 2 Select a preset number.
2
(Hold)
The station selected in step 1 is stored.
ON Select this to tune in only to stations with sufficient signal strength. The LO.S indicator lights up.
OFF Deactivate the function.
English 27
EN_LVT2269-001A_EQ.indb 27 11/11/28 10:08 Selecting a preset station The following features are available only for FM Radio Data System stations.
Searching for FM Radio Data System program—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code for your favorite programs. 1
2 Select a PTY code.
(Hold)
Changes the page PTY Search starts. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in.
• Only English/Spanish/French/German/ Dutch/Portuguese are available for the text language here. If another language has been selected in
28 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 28 11/11/28 10:08 Activating/deactivating TI/News Standby Reception
TI Standby Reception News Standby Reception 1
TI indicator NEWS indicator TI indicator TI Standby Reception 2 Lights in The unit will temporarily white switch to Traffic Information (TI) if available. Lights in Not yet activated. Tune in to orange another station providing the Radio Data System signals. Goes off Deactivated.
00min – Activates News Standby • The volume adjustment for Traffic 90min Reception (the NEWS Information is automatically memorized. indicator lights up). The next time the unit switches to Traffic Select the period of time Information, the volume is set to the to disable interruption. previous level. OFF Deactivates News Standby Reception.
• The volume adjustment while receiving News is automatically memorized. The next time the unit switches to News, the volume is set to the previous level.
English 29
EN_LVT2269-001A_EQ.indb 29 11/11/28 10:08 Tracing the same program— Automatic TI station seek— Network-Tracking Reception Auto TP Seek When driving in an area where FM When traffic information station reception reception is not sufficient enough, this unit is poor, the unit automatically searches for automatically tunes in to another FM Radio another station that can be received better. Data System station of the same network, possibly broadcasting the same program To activate Auto TP Seek with stronger signals. When shipped from the factory, Network- 1 Tracking Reception is activated.
To change the Network-Tracking Reception setting 1
2
2
To deactivate, select
AF Switches to another station. The program may differ from the one currently received (the AF indicator lights up). AF Reg Switches to another station broadcasting the same program (the AF indicator lights up). OFF Cancels.
• The RDS indicator lights up when the Network-Tracking Reception is activated and an FM Radio Data System station is found.
30 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 30 11/11/28 10:08 Using other external components
To display the source control screen, ☞ page 13.
AV-IN name ( ☞ below)
☞ page 32
[Mode] Changes the AV-IN name. • Press [2] or [3] to select an AV-IN name. • This setting does not affect the source name “AV-IN 1”/ “AV-IN 2” displayed on
AV-IN You can connect an external component to 3 Turn on the connected the AV-IN terminal. component and start playing Preparation: the source. If you want to use AV-IN2, select
1 Connect an external component. To connect it, ☞ page 70 , 71. 2 Select “AV-IN 1” or “AV-IN 2” as the source. (☞ page 13)
English 31
EN_LVT2269-001A_EQ.indb 31 11/11/28 10:08 Using the external navigation unit You can connect a navigation unit ( KNA-G620T/KNA-G630 : optional accessory) to the navigation input terminal so that you can view the navigation screen. (☞ page 71) The navigation guidance comes out through the front speakers even when you listen to an audio source.
To view the navigation 2 screen On
or On any screen: 3
The navigation screen is activated.
• While the navigation screen is displayed, the touch panel operations are available Guidance Select front speakers only for using navigation function. used for the navigation • The aspect ratio of the navigation screen guidance. is fixed to
the setup screen for the navigation unit. Settings for navigation unit See the instruction manual supplied for the 1 On
32 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 32 11/11/28 10:08 Sound adjustment Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR – VCD/CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC • You cannot adjust the sound when the unit is in standby. Selecting a preset sound Storing your own mode adjustment 1 On
2 Set
3 Select a sound mode. 3 Adjust the level of each band (1), then select the subwoofer level * (2).
Changes the page
The adjustments are stored and
* Adjustable only when the subwoofer is activated. (☞ page 40)
English 33
EN_LVT2269-001A_EQ.indb 33 11/11/28 10:08 Adjusting the sound precisely Adjusting the cross over 1 Perform steps 1 and 2 of frequency “Selecting a preset sound 1 On
2 2
3 Select the item to adjust, then 3 Adjust the sound of each make adjustment. band. Adjusts the cross over for front or rear speakers (high pass filter).
Flat Changes level of Bass/ Middle/Treble to 0. Adjusts the cross over for subwoofer (low pass filter).*1 Frequency Selects frequency. Level Adjusts level. Q Factor Adjusts the width of the frequency. Bass EXT Activates/deactivates bass. SW Level Adjusts subwoofer level.* The adjustments are stored and
34 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 34 11/11/28 10:08 Changing the display design
You can change the background and panel color.
1 On
2
For making your own color adjustment, ☞ below
Making your own color adjustment • You can make your own color adjustment only when
2 4 Select a background/panel color. To select a background 3 User color adjuster: You can make your own color adjustment stored in
For setting your favorite scene as the background, ☞ page 36 Dimmer setting: You can make the color adjustment for each dimmer setting
English 35
EN_LVT2269-001A_EQ.indb 35 11/11/28 10:08 Using your favorite scene as the 4 Adjust the image. background While playing a video or JPEG, you can capture an image and use the captured image as a background. • You cannot capture copyrighted content and images from iPod/iPhone. • When using a JPEG file as the background, make sure that the resolution is 800 x 600 pixels. • The color of the captured image may look [38]* Starts/Pauses playback. different from that of the actual scene. [ 3]* Advances scenes frame-by- frame. 1 Play back a video or JPEG. [ ] Magnifies the scene. (
A confirmation message appears. Press [Yes] to store the newly captured image. (The existing image is replaced with the new one.) • Press [No] to return to the previous screen.
36 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 36 11/11/28 10:08 Setting for video playback
You can change the setting for video playback. Picture adjustment 3 Adjust the picture (–15 to You can adjust the picture quality. +15). 1 Display the adjustment menu. Adjusts the brightness Adjusts the contrast Adjusts the black Adjusts the color Adjusts the tint* Adjusts the sharpness
* Adjustable only when the incoming signal is NTSC.
2 Select dimmer on (
English 37
EN_LVT2269-001A_EQ.indb 37 11/11/28 10:08 Changing the aspect ratio * While DivX is played back with
2
2
4:3 signal 16:9 signal FULL*: For 16:9 original pictures JUST: For 4:3LB 5 ∞ 2 3 original [ ] [ ] [ ] [ ] : Moves the zooming pictures frame. Normal*: For 4:3 original pictures Auto: • For “DISC”/”USB” only: Aspect ratio is automatically selected to match to the incoming signals.
38 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 38 11/11/28 10:08 Using a rear view camera
• To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera, ☞ page 71 . Activating the rear view Displaying the picture from camera the rear view camera The rear view screen is displayed when you 1 On
2
• To erase the caution message, touch the screen. 3 To display the picture from the rear
view camera manually DDX6021BT/ DDX4021BT/ DDX6051BT DDX4051BT/ DDX3021/DDX3051
To deactivate, select
When displaying the picture from the rear view camera manually, you can change the setting of the picture. (☞ page 37)
To cancel the rear view screen, press and hold the same button again.
English 39
EN_LVT2269-001A_EQ.indb 39 11/11/28 10:08 Setting menu items
• You cannot change
Audio volume level. The LOUD indicator lights up. X’over Adjust the cross over frequency. (☞ page 34) Volume Offset Adjust and store the auto-adjustment volume level for each source. (For discs, the adjustment is stored for each of the following categories: DVD/DVD-VR, VCD/CD, and DivX/ MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The volume level will automatically increase or decrease when you change the source. ♦ –15 to +6; Initial 0 Subwoofer ♦ ON : Activates the subwoofer. ♦ OFF : Cancels. Speaker Select Select the size of the connected speaker. ♦ Standard/Narrow/Middle/Wide
40 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 40 11/11/28 10:08 Menu item Selectable setting/item Initial: Underlined Dimmer ♦ Auto : Dims the screen and button illumination when you turn on the headlights. • The ILLUMI lead connection is required. (☞ page 69) ♦ ON : Activates dimmer. ♦ OFF : Cancels. ♦ NAV : Activates or deactivates dimmer according to the day/night display setting of the connected navigation unit. User Customize Change the display design (background and panel color). (☞ page 35) OSD Clock ♦ ON : Displays the clock while a video source is played back. ♦ OFF : Cancels. Scroll ♦ ON : Repeats scrolling. ♦ Once : Scrolls the displayed information once. ♦ OFF : Cancels. • Pressing [<] scrolls the text regardless of this setting. Display Menu Customize Select the large buttons to be displayed on the
English 41
EN_LVT2269-001A_EQ.indb 41 11/11/28 10:08 Menu item Selectable setting/item Initial: Underlined AV Input You can determine the use of AV-IN input terminal. ♦ AV-IN2 : Select to play an AV component connected to the AV-IN input terminal. ♦ iPod : Select when connecting the iPod/iPhone using the USB Audio and Video cable for iPod/iPhone. (☞ page 23)
Input R-CAM Interrupt ♦ ON : Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. ♦ OFF : Cancels. Navigation Change the navigation settings. (☞ page 32)
42 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 42 11/11/28 10:08 Menu item Selectable setting/item Initial: Underlined Language * Select the text language used for on-screen information. ♦ English/Spanish/French/German/Italian/Dutch/ Russian/Portuguese/Chinese-Simplified/Chinese- Traditional/Thai/Turkish/Arabic/Persian/Hebrew/ Greece/Indonesia; Initial for DDX6021BT/DDX4021BT/ DDX3021: English, for DDX6051BT/DDX4051BT/DDX3051: Russian • For external monitors, only English/Spanish/French/German/ Italian/Dutch/Russian/Portuguese are available. If another language has been selected, the text language for external monitors will be set to English. ♦ GUI : Select a language (
System Remote Sensor ♦ ON : Activates the remote sensor. ♦ OFF : Cancels. SETUP Memory You can memorize, recall, clear, or lock the settings you have made. (☞ page 44) DivX(R) VOD This unit has its own Registration Code. Once you have played back a file with which the Registration Code recorded, this unit’s Registration Code is overwritten for copyright protection. • Press [Enter] to display the information. • To return to the previous screen, press [OK]. Security Code Register the security code for the unit. (☞ page 7) SI Activate or deactivate the security function. (☞ page 7) Serial Number Displays the serial number. Touch Panel Adjust Adjust the touch position of the buttons on screen. (☞ page 44) System Information Displays the version information on the software. You can update the software. (☞ page 6) * “Please power off” appears when the setting is changed. Turn off the power, then turn on to enable the change.
English 43
EN_LVT2269-001A_EQ.indb 43 11/11/28 10:08 Memorizing/recalling the Locking the settings settings You can lock the settings to prevent them You can memorize the settings changed from being changed. in the
2
2
To unlock the setting, press [Unlock].
Adjusting the touch position You can adjust the touch position on the touch panel if the position touched and the • To cancel, press [No]. operation performed do not match. 3 Select an operation. 1 On
2 Touch the center of the marks at the lower left and at the upper right as instructed. [Recall]: Recalls the memorized settings. [Memory]: Memorizes the current settings. [Clear]: Clears the currently memorized settings. • To cancel, press [Cancel].
Confirmation message appears. Press [Yes]. • To cancel the current operation, press [Cancel]. • To reset to the initial setting, press [Reset].
44 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 44 11/11/28 10:08 BLUETOOTH OPERATIONS (Only for DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT ) Information for using Bluetooth® devices
• While driving, do not perform complicated operations such as dialing the numbers, using phonebook, etc. When you perform these operations, stop your car in a safe place. • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device. • This unit may not work for some Bluetooth devices. • Connecting condition may vary depending on circumstances around you. • When the unit is turned off, the device is disconnected.
Bluetooth operations
Preparation: Be sure to connect Bluetooth adapter Bluetooth is a short-range wireless radio KS-UBT1 (supplied) and microphone communication technology for the mobile (supplied) beforehand. ( ☞ page 69 ) device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other.
DDX6021BT/DDX6051BT DDX4021BT/DDX4051BT
Bluetooth adaptor (KS-UBT1)
Bluetooth adaptor (KS-UBT1)
English 45
EN_LVT2269-001A_EQ.indb 45 11/11/28 10:08 Connecting Bluetooth devices Connecting a new Bluetooth For connecting a Bluetooth mobile device for the first time phone When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate each
PIN code (initial: 0000)
Audio player
Deletes last character
46 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 46 11/11/28 10:08 3
4
• All registered devices (mobile phone and audio player) are listed on
Cancel 5 Operate the Bluetooth device A confirmation message appears. Press to connect. [Yes]. “Connected” appears. Press [OK] to confirm the operation. Deleting a registered Now connection is established and you Bluetooth device can use the Bluetooth device through the unit. 1 On
Confirmation message appears. Press [Yes].
Select the device you want to connect.
English 47
EN_LVT2269-001A_EQ.indb 47 11/11/28 10:08 Using the Bluetooth mobile phone Receiving a call Adjusting the volume of When a call comes in... microphone Call information While talking... Rejects the call (if acquired)
Status of the device/Battery reminder (only • This adjustment does not affect the volume when the information comes from the level of the other sources. device) • To adjust the volume of calls/earpiece, use the volume knob on the monitor panel. • Phone operation is not available while the picture from the rear view camera is Switching between displayed. (☞ page 39) handsfree mode and phone When
Ending a call While talking...
Each time you press the button, the talking method is switched ( : handsfree mode / : phone mode). Checking SMS reception If the mobile phone is compatible with SMS (Short Message Service), the unit tells you a message has been received.
To read a received message, operate the mobile phone after stopping the car in a safe place. • You cannot read, edit, or send a message through the unit.
48 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 48 11/11/28 10:08 Making a call Direct number entry Deletes last character 1 On
Hold: Adds “+” 2 Select a method to make a Presets the entered phone number on the call. preset list (☞ page 51) Phonebook/Call lists (☞ page 50) • You can enter up to 32 numbers. Direct number entry (☞ the right column) Voice Dialing • Available only when the connected mobile phone has the voice recognition system.
Speak the name you want to call. Preset list (For presetting, ☞ page 51) To cancel, press [Cancel]. Voice dialing (☞ the right column)
English 49
EN_LVT2269-001A_EQ.indb 49 11/11/28 10:08 Using the phonebook/call lists 2 Select the initial. If the initial 1 is not a letter or number, press [Others].
Outgoing From dialled call list. 3 Select a phone number from Incoming From received call list. the list. Missed From missed call list. Phonebook From phonebook. • For copying the phonebook, ☞ page 51.
To display the details of an entry When
2 To make a call, select a phone To use the A-Z search on the phonebook number. When
50 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 50 11/11/28 10:08 Presetting the phone Copying the phonebook numbers You can copy the phonebook memory of You can preset up to 6 phone numbers. a mobile phone into the unit (up to 400 entries). 1 On
2 Select an item from 2 phonebook/call lists.
3 3 Select a phone number.
(Hold)
4 Select a preset number to store. PIN code (initial: 0000)
• You can also preset the phone number Numbers of the phonebook entries copied entered on
The phonebook memory is copied from the mobile phone. English 51
EN_LVT2269-001A_EQ.indb 51 11/11/28 10:08 Deleting the phone number About mobile phones entries in the unit compatible with Phone Book 1 Display the phonebook/call Access Profile (PBAP) list you want to delete. (☞ page If your mobile phone supports PBAP, the phonebook and call lists are automatically 50) copied to the unit when the mobile phone is 2 connected. • Phonebook: up to 5 000 entries • Dialled calls, received calls, and missed calls: up to 50 entries each
To display the phonebook/call lists of the mobile phone or the unit Connected mobile phone
• You cannot delete data when
Unit
Delete all the numbers/ names in the selected item A confirmation message appears. Press [Yes].
52 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 52 11/11/28 10:08 Using the Bluetooth audio player • To register a new device, ☞ page 46. • To connect/disconnect a device, ☞ page 47.
Tag data (current track title/ artist name/album title) * • Pressing [<] scrolls the text if not all of the text is shown.
Playing time *
Playback status * (3: play / 8: pause)
☞ page 32 Battery reminder (only when the information comes from the device)
• The operation buttons, indications and information displayed on the screen differ depending on the connected device. [3] Starts playback. [Mode] Displays the Bluetooth [8] Pauses. setting screen. (☞ below) [4][¢] • Selects track. (Press) [MENU] Displays
* Available only for the devices compatible with AVRCP 1.3.
Bluetooth device settings For Bluetooth mobile phone: For Bluetooth audio player: 1 On
2 2
English 53
EN_LVT2269-001A_EQ.indb 53 11/11/28 10:08 Menu items Selectable setting/item Initial: Underlined
Connection ♦ Connect : ☞ page 47 ♦ Disconnect : ☞ page 47 PIN Code Changes the PIN code of the unit. • Enter a new PIN code, then press [Enter]. Device Name Shows the device name to be shown on the Bluetooth device — “KENWOOD BT MM-6U2.” Device Shows the device address of the unit. Address Phone Shows the connected phone device name. Device*1 Audio Shows the connected audio device name. Device*2 Auto ♦ OFF : Cancels. Connect ♦ ON : The connection is automatically established with the last connected Bluetooth device when the unit is turned on. Bluetooth Select the speakers used for Bluetooth (both phone use and audio player). HF/Audio ♦ Front Only : From front speakers only. ♦ All : From all speakers. Initialize Hold [Enter] to initialize all settings you have made for using Bluetooth mobile phone and Bluetooth audio player. Auto ♦ OFF : The unit does not answer the calls automatically. Answer Response*1 the calls manually. ♦ ON : The unit answers the incoming calls automatically within 5 seconds. SMS Notify*1 ♦ OFF : The unit does not inform you of the arrival of a message. ♦ ON : The unit informs you of the arrival of a message by ringing and displaying “Receiving Message.” Ring Mode*1 ♦ System : Selects the ring tone set on the unit. ♦ Phone : Selects the ring tone set on the mobile phone. (This function may not work depending on the mobile phone.) Ring Tone When
54 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 54 11/11/28 10:08 USING THE REMOTE CONTROLLER Overview
DDX6021BT/DDX6051BT : This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. DDX4021BT/DDX4051BT/DDX3021/DDX3051 : Optional Remote Controller KNA-RCDV331 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller.
CAUTION • If the Remote Controller operates only • Put the Remote Controller in a place where over shorter distances or does not operate it will not move during braking or other at all, it is possible that the batteries are operations. A dangerous situation could depleted. In such instances, replace the result, if the Remote Controller falls down both batteries with new ones. and gets wedged under the pedals while Remote Controller mode switch driving. The functions operated from the remote • Do not leave the battery near fire or controller differ depending on the position of under direct sunlight. A fire, explosion or the mode switch. excessive heat generation may result. • Do not recharge, short, break up or heat the battery or place it in an open fire. Such
actions may cause the battery to leak fluid. AUDt If spilled fluid comes in contact with your DVDt eyes or on clothing, immediately rinse with TVt water and consult a physician. • Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician. Battery installation Use two “AAA”/”R03”-size batteries. Insert the batteries with the + and – poles AUD mode: Switch to this mode when aligned properly, following the illustration controlling a selected source or tuner source, inside the case. etc. DVD mode: Switch to this mode when playing DVDs or CDs etc. with the player integrated in this unit. TV mode: Not used. • The position of the remote control mode switch is indicated in the title of each mode, e.g., “(AUD mode)”. • When controlling a player that is not integrated in the unit, select “AUD” mode.
English 55
EN_LVT2269-001A_EQ.indb 55 11/11/28 10:08 Operations from the remote controller
Common operations (AUD mode) ENTER Source switching Enters options. Switches to the source to be played. Hangs up the incoming/current call.
Hands-free communication When a call comes in, it answers the call. Volume control Adjusts the volume.
Function
Switches the function screen. Volume attenuating Press the key once to lower the volume. Press again to restore the previous volume.
MODE Switches the screen mode. NAV/V.SEL Screen mode changes each time you press Switches to the navigation screen. this key.
Cursor key OPEN Moves the cursor when displaying menu. Adjusts the panel angle. The panel angle changes each time you press this key.
56 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 56 11/11/28 10:08 DVD/VCD (DVD mode) VCD 1.X, VCD 2.X (PBC OFF) Track search and file search Track number Selects the track or file to be played. Cancel
VCD 2.X (PBC ON) Track number
Cancel Play/Pause Once you have switched to the direct search Pauses the track. feature, specify the search number from the Press again to resume playing. numeric keypad, and then press [ENTER] key. Numeric keypad
Stop Memorizes the last point where the disc
stopped. • Specify the number to search in direct search.
• Press 1 2ABC to fast forward/backward. Switches the fast forward/backward speed each time you press this key. Direct search • Press 1 2ABC to slow forward/backward during pause. DVD Top Menu Returns to the DVD top menu.
Pressing this key switches the features that can be searched directly. DVD-VIDEO Chapter number DVD Menu Title number Displays the DVD menu. Cancel
DVD-VR
Chapter number Program/Playlist Cancel
English 57
EN_LVT2269-001A_EQ.indb 57 11/11/28 10:08 SUBTITLE Track search and file search Switches the subtitle language. Selects the track or file to be played.
Play/Pause ZOOM Pauses the track. Switches the zoom ratio each time you press Press again to resume playing. this key.
Direct search Picture Angle Switches the picture angle each time you press this key.
Pressing this key switches the features that can be searched directly. Music Disc
Track number AUDIO Switches Voice Language. Cancel Switches the voice language each time you press this key. Audio files in DVD/CD disc Folder number File number Cancel Once you have switched to the direct search feature, specify the search number from the Music Disc/Audio file/Video file/ numeric keypad, and then press [ENTER] key. Picture file (AUD mode) Numeric keypad Folder search Selects the folder to be played.
• Specify the number to search in direct search.
58 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 58 11/11/28 10:08 Radio (AUD mode) • To use preset tuning, press the number of Band switching a programmed broadcast station. ( 1 –
Switches to bands received by the unit. 6MNO ) • Press the direct tuning key first, then specify the frequency of the station to receive.
iPod (AUD mode) Station selection Music/Video search Switches to broadcast stations received by Selects the music/video to be played. the unit.
Seek mode switching Play/Pause Switches the Seek mode (AUTO1, AUTO2, Pauses the music/video. MANU). Press again to resume playing.
Direct tuning After pressing this key, use the keypad to USB (AUD mode) specify the broadcast station you wish to Folder search receive. Selects the folder to be played.
Example: 92.1MHz (FM) File search 9WXYZ ABC 1 2 Selects the file to be played. « or
Example: 810kHz (AM)
8TUV 1 0 « Play/Pause or Pauses the file. Press again to resume playing. Numeric keypad
English 59
EN_LVT2269-001A_EQ.indb 59 11/11/28 10:08 REFERENCE Maintenance Caution on cleaning the unit To keep discs clean Do not use A dirty disc may not play correctly. any solvent If a disc does become dirty, wipe (for example, it with a soft cloth in a straight line thinner, from center to edge. benzine, etc.), • Do not use any solvents (for detergent, or example, conventional record cleaner, insecticide. This may damage the monitor or spray, thinner, benzine, etc.) to clean discs. the unit. Recommended cleaning method: To play new discs Gently wipe the panel with a soft, dry cloth. New discs may have some rough spots around the inner Moisture condensation and outer edges. If such a disc Moisture may condense on the lens inside is used, this unit may reject the the unit in the following cases: disc. • After starting the heater in the car. To remove these rough spots, rub the • If it becomes very humid inside the car. edges with a pencil or ball-point pen, etc. Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit Do not use the following discs: turned on for a few hours until the moisture evaporates. 8 cm CD Warped disc How to handle discs When removing a disc from its case, press Center holder down the center holder Sticker and sticker of the case and lift the residue Stick-on label disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface. C-thru Disc (semi- When storing a disc in its case, gently Unusual shape transparent disc) insert the disc around the center holder (with the printed surface facing up). • Make sure to store discs in their cases after use. Transparent or semi- transparent parts on its recording area
60 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 60 11/11/28 10:08 More about this unit File playback Playing MP3/WMA/WAV/AAC files • This unit can play back files with the Playing DivX files extension code <.mp3>, <.wma>, <.wav>, • This unit can play back DivX files with the or
English 61
EN_LVT2269-001A_EQ.indb 61 11/11/28 10:08 Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/Front Preout/Rear Preout) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. Language codes (for DVD/DivX language selection) Code Language Code Language Code Language Code Language AA Afar GL Galician MI Maori SO Somali AB Abkhazian GN Guarani MK Macedonian SQ Albanian AF Afrikaans GU Gujarati ML Malayalam SR Serbian AM Ameharic HA Hausa MN Mongolian SS Siswati AR Arabic HI Hindi MO Moldavian ST Sesotho AS Assamese HR Croatian MR Marathi SU Sundanese AY Aymara HU Hungarian MS Malay (MAY) SW Swahili AZ Azerbaijani HY Armenian MT Maltese TA Tamil BA Bashkir IA Interlingua MY Burmese TE Telugu BE Byelorussian IE Interlingue NA Nauru TG Tajik BG Bulgarian IK Inupiak NE Nepali TH Thai BH Bihari IN Indonesian NO Norwegian TI Tigrinya BI Bislama IS Icelandic OC Occitan TK Turkmen BN Bengali, Bangla IW Hebrew OM (Afan) Oromo TL Tagalog BO Tibetan JA Japanese OR Oriya TN Setswana BR Breton JI Yiddish PA Panjabi TO Tonga CA Catalan JW Javanese PL Polish TR Turkish CO Corsican KA Georgian PS Pashto, Pushto TS Tsonga CS Czech KK Kazakh QU Quechua TT Tatar CY Welsh KL Greenlandic RM Rhaeto- TW Twi Romance DZ Bhutani KM Cambodian RN Kirundi UK Ukrainian EL Greek KN Kannada RO Rumanian UR Urdu EO Esperanto KO Korean (KOR) RW Kinyarwanda UZ Uzbek ET Estonian KS Kashmiri SA Sanskrit VI Vietnamese EU Basque KU Kurdish SD Sindhi VO Volapuk FA Persian KY Kirghiz SG Sangho WO Wolof FI Finnish LA Latin SH Serbo-Croatian XH Xhosa FJ Fiji LN Lingala SI Singhalese YO Yoruba FO Faroese LO Laothian SK Slovak ZU Zulu FY Frisian LT Lithuanian SL Slovenian GA Irish LV Latvian, Lettish SM Samoan GD Scots Gaelic MG Malagasy SN Shona
62 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 62 11/11/28 10:08 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). If the following messages appear Message Remedy/Cause “No Signal” • Start the playback on the external component connected to AV-IN input terminal. • Check the cords and connections. • Signal input is too weak. • “Miswiring DC A speaker cord has shorted or it has come in to contact with the car Offset Error” chassis. Wire or insulate the speaker cord as appropriate, then reset • “Warning DC Offset the unit (☞ page 3, 69 ). Error” “Parking off” No playback picture is shown when the parking brake is not engaged. “Authorization Error” Check whether the connected iPod/iPhone is compatible with this unit. (☞ page 23) “USB Device Error” • The USB power voltage is abnormal. • Turn off and turn on the unit. • Connect another USB device. “No BT Dongle” Bluetooth adapter (KS-UBT1) is removed. “Connection Error” The device is registered but the connection has failed. Connect the registered device. ( ☞ page 47) “Please Wait...” The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). “NO Voice Device” The connected mobile phone does not have the voice recognition system. “NO Data” No phonebook data is contained in the connected Bluetooth phone. “Initialize Error” The unit has failed to initialize the Bluetooth module. Try the operation again. “Dial Error” Dialing has failed. Try the operation again. “Hung Up Error” The call has not ended yet. Park your car, and use the connected mobile phone to end the call. “Pick Up Error” The unit has failed to receive a call. “Pairing Mode Error” Pairing between the unit and Bluetooth device has failed. Register the device again. (☞ page 46) “Panel Mecha Error” The panel does not work properly. Reset the unit. “No Navigation” No navigation unit is connected.
English 63
EN_LVT2269-001A_EQ.indb 63 11/11/28 10:08 If there seems to be a problem Symptom Remedy/Cause No sound comes out of the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. No picture is displayed on the Turn on the screen. (☞ page 11) screen.
General The unit does not work at all. Reset the unit. (☞ page 3) The remote controller* does not Replace the battery. work. AME automatic presetting does Store stations manually. (☞ page 27) not work. Static noise while listening to Connect the aerial firmly. TUNER the radio. • Recordable/Rewritable discs • Insert a finalized disc. cannot be played back. • Finalize the discs with the component which you • Tracks on the Recordable/ used for recording. Rewritable discs cannot be skipped. Playback does not start. The format of files is not supported by the unit.
Disc in general No picture appears on the • Connect the video cord correctly. external monitor. • Select the correct input on the external monitor. Disc cannot be played back. • Record the tracks using a compliant application on the appropriate discs. (☞ page 15) • Add appropriate extension codes to the file names.
Tracks are not played back as Playback order may differ from the one played back you have intended them to play. using other players. DivX/MPEG1/MPEG2/ JPEG/MP3/WMA/WAV/AAC No picture appears on the • Turn on the video component if it is not on. screen. • Connect the video component correctly. AV-IN
* For DDX4021BT/DDX4051BT/DDX3021/DDX3051, purchase KNA-RCDV331 separately.
64 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 64 11/11/28 10:08 Symptom Remedy/Cause No sound comes out of the • Disconnect the iPod, then connect it again. speakers. • Select another source and then reselect “iPod”. The iPod/iPhone does not turn • Check the connecting cable and its connection. on or does not work. • Update the firmware version. • Charge the battery. • Check whether the iPod control mode is correctly selected. (☞ page 25) • Reset the iPod/iPhone. Sound is distorted. Deactivate the equalizer either on this unit or the iPod/iPhone. A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of the iPod. For details, visit
USB While playing a track, sound is The tracks are not properly copied into the USB sometimes interrupted. device. Copy tracks again, and try again.
English 65
EN_LVT2269-001A_EQ.indb 65 11/11/28 10:08 Symptom Remedy/Cause Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or • Reduce the distance between the unit and the skipped while using a Bluetooth Bluetooth audio player. audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (When the sound is not yet restored) connect the player again. The connected audio player Check whether the connected audio player cannot be controlled. supports AVRCP (Audio Video Remote Control Profile). Bluetooth device does not • Check whether the Bluetooth adapter (KS-UBT1) detect the unit. is inserted correctly.
DDX4021BT/DDX4051BT ) DDX4021BT/DDX4051BT • Search from the Bluetooth device again. The unit does not make pairing Enter the same PIN code for both the unit and with the Bluetooth device. target device. If the PIN code of the device is not indicated on its instructions, try “0000” or “1234.” Bluetooth (only for DDX6021BT/DDX6051BT/ Bluetooth (only for Echo or noise occurs. Adjust the microphone unit position. The unit does not respond when You may have tried to copy the same entries (as you try to copy the phonebook stored) to the unit. to the unit.
66 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 66 11/11/28 10:08 Accessories/Installation Procedure Accessories 6 Connect the wiring harness connector to the unit. 1 6*2 7 Install the unit in your car. 8 Reconnect the - battery. 9 Press the reset button. 10 Perform the Initial Setup...... 1 ...... 1 2WARNING 3 2 7* • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the ...... 1 (2m) ...... 1 (3m) power source running through the fuse box. • Do not cut out the fuse from the ignition wire 3 *1 DDX4021BT/ (red) and the battery wire (yellow). The power DDX4051BT/DDX3021/ supply must be connected to the wires via the DDX3051 only. fuse. *2 DDX6021BT/ DDX6051BT only. After the Installation ...... 1 After the installation, perform the Initial Setup *3 DDX6021BT/ by referring to the instruction manual. 4*1 DDX6051BT/ DDX4021BT/ DDX4051BT only. ¤ • Mounting and wiring this product requires ...... 2 skills and experience. For best safety, leave the mounting and wiring work to professionals. 5*2 • Make sure to ground the unit to a negative 12V DC power supply. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of ...... 2 water splashing. • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. Installation Procedure • If the power is not turned ON (“Miswiring 1 To prevent a short circuit, remove the key DC Offset Error”, “Warning DC Offset Error” is from the ignition and disconnect the - displayed), the speaker wire may have a short- battery. circuit or touched the chassis of the vehicle and 2 Make the proper input and output wire the protection function may have been activated. Therefore, the speaker wire should be checked. connections for each unit. • If your car’s ignition does not have an ACC 3 Connect the speaker wires of the wiring position, connect the ignition wires to a power harness. source that can be turned on and off with the 4 Take Connector B on the wiring harness ignition key. If you connect the ignition wire to and connect it to the speaker connector in a power source with a constant voltage supply, your vehicle. such as with battery wires, the battery may be 5 Take Connector A on the wiring harness drained. and connect it to the external power • If the console has a lid, make sure to install the connector on your vehicle. unit so that the faceplate will not hit the lid when closing and opening. English 67
EN_LVT2269-001A_EQ.indb 67 11/11/28 10:08 • If the fuse blows, first make sure the wires aren’t DDX6021BT/ DDX6051BT only touching to cause a short circuit, then replace the 1 Before installation, remove the screws. old fuse with one with the same rating. ⁄ • Insulate unconnected wires with vinyl tape or Do not use the removed screws for other similar material. To prevent a short circuit, installation. do not remove the caps on the ends of the unconnected wires or the terminals. • Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. • When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the 2 Detach the sleeve using the two removal rear output terminals (do not mix front and rear). tools 5 then slide off the sleeve. For example, if you connect the + connector Accessory 5 of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal. • After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. • Mount the unit so that the mounting angle is 30° or less. • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • This unit has the cooling fan to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction.
Cooling fan
DDX4021BT/ DDX4051BT only • Install the Bluetooth adaptor (KS-UBT1) besides the place enclosed by the metal.
¤ CAUTION Install this unit in the console of your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot. Bluetooth adaptor (KS-UBT1) 68 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 68 11/11/28 10:08 Connecting Wires to Terminals
Bluetooth Microphone (Accessory 7) Subwoofer Preout (monaural) DDX6021BT/DDX6051BT/ DDX4021BT/DDX4051BT only Purple/White Connect to vehicle's reverse lamp harness when using the optional rear (Reverse sensor wire) view camera. Extension cable (Accessory 2) Antenna Cord Light Green
(Parking sensor wire) For best safety, be sure to connect the parking sensor. Connect to the vehicle's parking ⁄ brake detection switch harness.
FM/AM antenna input (JASO) FUSE ( 10A ) Accessory 1 If no connections are made, do not let the cable come out from the tab.
Light blue/Yellow To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your (Steering remote control car is required. wire)
Blue/White To the power control terminal when using the optional (Power control/antenna power amplifier, or to the antenna control terminal in the control wire) vehicle.
Brown To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood (Mute control wire) navigation system, consult your navigation manual.)
Connecting the ISO connectors on some VW/Audi or Opel Yellow (Battery wire) (Vauxhall) automobiles You may need to modify the wiring of the supplied Red (Ignition wire) wiring harness as illustrated below. Red Red (A7) (Ignition wire) Red (A7)
Yellow (A4) Unit Vehicle
Connector A Yellow Yellow (A4) (Battery wire) Connector B Default wiring
Pin Colour and functions Pin Colour and functions A4 Yellow Battery B1/B2 Purple+ / Purple/Black- Rear Speaker (Right) A5 Blue/White Power Control B3/B4 Gray+ / Gray/Black- Front Speaker (Right) A6 Orange/White Dimmer B5/B6 White+ / White/Black- Front Speaker (Left) A7 Red Ignition (ACC) B7/B8 Green+ / Green/Black- Rear Speaker (Left) A8 Black Earth (Ground) Connection
English 69
EN_LVT2269-001A_EQ.indb 69 11/11/28 10:08 Connecting a USB device/iPod/iPhone
For DDX6021BT/DDX6051BT iPod (commercially available)
USB device (commercially available)
CA-U1EX (Optional Accessory) USB terminal
(0.8 m) KCA-iP202 (Optional Accessory) Audio Visual input 2 (1.8 m) (iPod/AV Input 2 switchable)
For DDX4021BT/DDX4051BT/DDX3021/DDX3051 USB terminal USB device (commercially available) iPod (commercially available)
CA-U1EX (Optional Accessory)
KCA-iP22F Audio Visual input 2 (Optional Accessory) (iPod/AV Input 2 switchable)
70 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 70 11/11/28 10:08 Connecting Other Products
Navigation System (Optional Accessory)
⁄ Navigation units that can be connected to this unit. (As of December, 2011): • KNA-G620T • KNA-G630 For latest information, access the www.kenwood.com/cs/ce/. Rear View Camera Input • Visual input (Yellow) Audio/Visual Output • Visual output (Yellow) • Audio output (3.5φ mini plug) Resistance-free stereo type mini plug
Connection cable (Included in the Navigation System)
Rear Preout • Audio left output (White) • Audio right output (Red) Front Preout • Audio left output (White) • Audio right output (Red) Audio Visual input 1 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red)
English 71
EN_LVT2269-001A_EQ.indb 71 11/11/28 10:08 Installing/Removing the Unit
Installing the Escutcheon Removing the Escutcheon 1 Attach accessory 3 to the unit. (DDX4021BT/DDX4051BT/ DDX3021/DDX3051 only) 1 Engage the catch pins on the removal tool 4 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Accessory 4
Accessory 3 Catch Lock Installing the Unit
⁄ • The frame can be removed from the top side in the same manner. 2 When the lower level is removed, remove the upper two locations.
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
For more stable attachment the unit (DDX6051BT/ DDX6021BT only)
Bracket
Accessory 6 ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).
72 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 72 11/11/28 10:08 Removing the Unit Installing the Microphone Unit (DDX4021BT/DDX4051BT/ (DDX6021BT/ DDX6051BT/ DDX3021/DDX3051 only) DDX4021BT/ DDX4051BT only) 1 Remove the escutcheon by referring to 1 Check the installation position of the the removal procedure in the section microphone (accessory 7).
Accessory 7 3 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.
Fix a cable with a commercial item of tape.
⁄ • Be careful to avoid injury from the catch pins on the removal tool. 4 Pull the unit all the way out with your hands, being careful not to drop it. Peel the release coated paper of double-face adhesive tape to fix on the place shown above.
Adjust the direction of the microphone to the driver.
English 73
EN_LVT2269-001A_EQ.indb 73 11/11/28 10:08 Specifications Monitor section Sampling frequency : 44.1/48/96 kHz Picture Size Quantifying Bit Number : 6.95 inches (diagonal) wide : 16/20/24 bit 156.6 mm (W) × 81.6 mm (H) (DDX6021BT/DDX6051BT) USB interface section : 6.1 inches (diagonal) wide 136.2 mm (W) × 72 mm (H) USB Standard ( DDX4021BT/DDX4051BT/DDX3021/ : USB 2.0 Full Speed DDX3051) File System Display System : FAT 16/32 : Transparent TN LCD panel Maximum Power Supply Current Drive System : DC 5 V 1 A : TFT active matrix system D/A Converter Number of Pixels : 24 Bit : 1,152,000 (800H × 480V × RGB) Video Decoder Effective Pixels : MPEG1/MPEG2/DivX : 99.99% Audio Decoder Pixel Arrangement : MP3/WMA/AAC/WAV (Linear PCM) : RGB striped arrangement Back Lighting Bluetooth section (DDX6021BT/ : LED DDX6051BT/DDX4021BT/DDX4051BT) Technology DVD player section : Bluetooth 2.0 Certified D/A Converter Frequency : 24 bit : 2.402 – 2.480 GHz Audio Decoder Output Power : Linear PCM/Dolby Digital/dts/MP3/ : +4dBm (MAX), 0dBm (AVE), Power WMA/AAC/WAV Class2 Video Decoder Maximum Communication range : MPEG1/MPEG2/DivX : Line of sight approx. 10m (32.8 ft) Wow & Flutter Profile : Below Measurable Limit HFP (Hands Free Profile), Frequency Response OPP (Object Push Profile), Sampling frequency; PBAP (Phonebook Access Profile), 96 kHz: 20 – 22,000 Hz A2DP (Advanced Audio Distribution 48 kHz: 20 – 22,000 Hz Profile), 44.1 kHz: 20 – 20,000 Hz AVRCP (Audio/Video Remote Control Total Harmonic Distortion Profile) : 0.010% (1 kHz) S/N Ratio (dB) : 99 dB (DVD-Video 96 kHz) Dynamic Range : 98 dB (DVD-Video 96 kHz) Disc Format : DVD-Video/VIDEO-CD/CD-DA
74 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 74 11/11/28 10:08 FM tuner section Audio section Frequency Range (50 kHz) Maximum Power (Front & Rear) : 87.5 MHz – 108.0 MHz : 50 W × 4 Usable Sensitivity (S/N: 26 dB) Full Bandwidth Power (Front & Rear) : 0.7 μV/75 Ω (PWR DIN 45324, +B=14.4V) Quieting Sensitivity (S/N: 46 dB) : 30 W × 4 : 1.6 μV/75 Ω Preout Level (V) Frequency Response (± 3.0 dB) : 4 V/10 kΩ : 30 Hz – 15 kHz Preout Impedance S/N Ratio (dB) : ≤ 600 Ω : 65 dB (MONO) Speaker Impedance Selectivity (± 400 kHz) : 4 – 8 Ω : ≥ 65 dB Tone Stereo Separation Bass: 100 Hz ± 8 dB : 35 dB (1 kHz) Middle: 1 kHz ± 8 dB Treble: 12.5 kHz ± 8 dB LW tuner section Frequency Range (9 kHz) General : 153 kHz – 279 kHz Operating Voltage Usable Sensitivity : 14.4 V (10.5 – 16 V allowable) : 45 μV Maximum Current Consumption : 10 A MW tuner section Dimensions (W × H × D) Frequency Range (9 kHz) : 182 × 111 × 160 mm : 531 kHz – 1611 kHz (DDX6021BT/DDX6051BT ) Usable Sensitivity 182 × 112 × 163 mm : 25 μV ( DDX4021BT/DDX4051BT/DDX3021/ DDX3051 ) Video section Operational Temperature Range : –10°C – +60°C Color System of External Video Input : NTSC/PAL Storage Temperature Range : –20°C – +85°C External Video Input Level (RCA/mini jack) : 1 Vp-p/ 75 Ω Weight : 2.5 kg External Audio Max Input Level (RCA/ (DDX6021BT/DDX6051BT ) mini jack) 2.0 kg : 2 V/ 25 kΩ (DDX4021BT/DDX4051BT/DDX3021/ Video Output Level (RCA jack) DDX3051 ) : 1 Vp-p/ 75 Ω Audio Output Level (mini jack) • Although the effective pixels for the : 1.2 V/ 10 kΩ liquid crystal panel is given as 99.99% or Analog RGB input more, 0.01% of pixels may not light or : 0.7 Vp-p/ 75 Ω may light incorrectly. • Specifications are subject to change without notice.
English 75
EN_LVT2269-001A_EQ.indb 75 11/11/28 10:08 • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • The “AAC” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. • “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. • iTunes is a trademark of Apple Inc. • DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. • This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
76 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 76 11/11/28 10:08 KS-UBT1 (USB Bluetooth Adapter) Instruction Manual Specifications CAUTION Bluetooth Version: Bluetooth 2.0 Certified Changes or modifications not approved by us Power Class: Class2 Radio could void the user’s authority to operate the Service Area: 10 m (10.9 yd) equipment. USB Standards: USB V1.1 (Full Speed) Power Consumption: 54.3 mA/5 V (max.) • This adapter has been designed exclusively Dimensions (L × W × H): for use with Kenwood car receivers. Do not 15 mm × 19 mm × 5.6 mm use this adapter with any other car receiver. (5/8 ” × 3/4 ” × 1/4 ”) For details, see also the Instructions supplied with your receiver. Keep the Bluetooth adapter inserted when • The Bluetooth word mark and logos are using the Bluetooth function. owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD When the adapter is removed, store it in a Corporation is under license. Other safe place. trademarks and trade names are those of their respective owners.
Distributor name: JVC KENWOOD DO BRASIL COMERCIO DE ELETRONICOS LTDA CNPJ of distributor: JVC KENWOOD DO BRASIL COMERCIO DE ELETRONICOS LTDA Manufacturer: JVC KENWOOD Corporation Model no.: KS-UBT1 Brand: JVC
0178-11-6733
(01)07898929117502
“Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.”
English 77
EN_LVT2269-001A_EQ.indb 77 11/11/28 10:08 Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Svenska Hereby, Kenwood declares that this unit KS-UBT1 is in compliance Härmed intygar Kenwood att denna KS-UBT1 stär l with the essential requirements and other relevant provisions of överensstämelse med de väsentliga egenskapskrav och övriga Directive 1999/5/EC. relevanta bestämmelser som framgår av direktiv 1999/5/EG. Français Suomi Par la présente Kenwood déclare que l’appareil KS-UBT1 est Kenwood vakuuttaa täten että KS-UBT1 tyyppinen laite on conforme aux exigences essentielles et aux autres dispositions direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien pertinentes de la directive 1999/5/CE. direktiivin muiden ehtojen mukainen. Par la présente, Kenwood déclare que ce KS-UBT1 est conforme Slovensko aux exigences essentielles et aux autres dispositions de la directive S tem Kenwood izjavlja, da je ta KS-UBT1 v skladu z osnovnimi 1999/5/CE qui lui sont applicables. zahtevami in ostalimi ustreznimi predpisi Direktive 1999/5/EC. Deutsch Slovensky Hiermit erklärt Kenwood, dass sich dieser KS-UBT1 in Spoločnosť Kenwood týmto vyhlasuje, že KS-UBT1 spĺňa zákldné Übereinstimmung mit den grundlegenden Anforderungen und požiadavky a ďalšie prislušné ustanovenia Direktĺvy 1999/5/EC. den anderen relevanten Vorschriften der Richtlinie 1999/5/EG Dansk befindet. (BMWi) Undertegnede Kenwood erklærer harved, at følgende udstyr Hiermit erklärt Kenwood die Übereinstimmung des Gerätes KS-UBT1 overholder de væsentlige krav og øvrige relevante krav i KS-UBT1 mit den grundlegenden Anforderungen und den anderen direktiv 1999/5/EF. relevanten Festlegungen der Richitlinie 1999/5/EG. (Wien) Ελληνικά Nederlands ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Kenwood ΔΗΛΩΝΕΙ ΟΤΙ KS-UBT1 Hierbij verklaart Kenwood dat het toestel KS-UBT1 in ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ overeenstemming is met de essentiële eisen en de andere ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK. relevante bepalingen van richtlijn 1999/5/EG. Eesti Bij deze verklaat Kenwood dat deze KS-UBT1 voldoet aan de Sellega kinnitab Kenwood, et see KS-UBT1 vastab direktiivi essentiële eisen en aan de overige relevante bepalingen van 1999/5/EC põhilistele nõudmistele ja muudele asjakohastele Richtlijn 1999/5/EC. määrustele. Italiano Latviešu Con la presente Kenwood dichiara che questo KS-UBT1 è conforme Ar šo, Kenwood, apstiprina, ka KS-UBT1 atbilst Direktīvas 1999/5/ ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite EK galvenajām prasībām un citiem tās nosacījumiem. dalla direttiva 1999/5/CE. Lietuviškai Español Šiuo, Kenwood, pareiškia, kad šis KS-UBT1 atitinka pagrindinius Por medio de la presente Kenwood declara que el KS-UBT1 cumple Direktyvos 1999/5/EB reikalavimus ir kitas svarbias nuostatas. con los requisitos esenciales y cualesquiera otras disposiciones Malti aplicables o exigibles de la Directiva 1999/5/CE. Hawnhekk, Kenwood, jiddikjara li dan KS-UBT1 jikkonforma mal- Português ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm Kenwood declara que este KS-UBT1 está conforme com os fid-Dirrettiva 1999/5/EC. requisitos essenciais e outras disposições da Directiva 1999/5/CE. Українська Polska Компанія Kenwood заявляє, що цей виріб KS-UBT1 відповідає Kenwood niniejszym oświadcza, że KS-UBT1 spełnia zasadnicze ключовим вимогам та іншим пов’язаним положенням wymogi oraz inne istotne postanowienia dyrektywy 1999/5/EC. Директиви 1999/5/EC. Český Türkçe Kenwood timto prohlasuje, ze KS-UBT1 je ve shode se zakladnimi Bu vesileyle Kenwood, KS-UBT1 ünitesinin, 1999/5/EC Direktifinin pozadavky a s dalsimi prislusnymi ustanoveni Narizeni vlady c. başlıca gereksinimleri ve diğer ilgili hükümleri ile uyumlu 426/2000 Sb. olduğunu beyan eder. Magyar Alulírott, Kenwood, kijelenti, hogy a jelen KS-UBT1 megfelel az 1999/5/EC irányelvben meghatározott alapvető követelményeknek és egyéb vonatkozó előírásoknak.
78 DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
EN_LVT2269-001A_EQ.indb 78 11/11/28 10:08 common_blank.indd 1 11/11/21 9:59 LVT2269-001A_EQ_cover.indd 1 11/11/22 15:47