SELECT VEHICLE PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
2 Print only the pages for your vehicle using the advanced options in the Print menu.
3 Install your Maestro RR according to the guide for your vehicle.
WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners. INSTALL GUIDE Acura CSX WITH AMP WITHOUT NAV 2006-2011 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Acura CSX WITH AMP WITHOUT NAV 2006-2011
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Acura CSX WITH AMP WITHOUT NAV 2006-2011
INSTALLATION INSTRUCTIONS
BEFORE INSTALLING TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • To determine if the vehicle is equipped with a factory to the OFF position then disconnect all connectors from amplifi er, look at the rear deck. If there is a subwoofer the module. Press and hold the module’s programming present in the rear deck, the vehicle has an amplifi er. If button and connect all the connectors back to the module. there are only two speakers in the rear deck, it is NOT Wait, the module’s LED will fl ash RED rapidly (this may amplifi ed. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • Remove the factory radio. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. STEP 1 com/support” and “www.12voltdata.com/forum/” • Unbox the aftermarket radio and locate its main harness. • Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2 • Connect the white junction plug of the HO1 T-harness to the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation.
3
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Acura CSX WITH AMP WITHOUT NAV 2006-2011
WIRING DIAGRAM with an Amplifier STEP 1 STEP 4 RCA CABLES WHITE LF RCA INPUT WHITE/BLACK GRAY RF RCA INPUT GRAY/BLACK GREEN LR RCA INPUT GREEN/BLACK PURPLE RR RCA INPUT PURPLE/BLACK BLUE/WHITE - AMP. TURN ON (+) MAIN CONNECT TO BLACK - GROUND HARNESS AFTERMARKET RADIO RED - ACCESSORY (+) YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE YELLOW/BLACK - FOOT BRAKE COLORS
RCA CABLES
CONNECT IF EQUIPPED
AUX IN
STEP 2 FACTORY RADIO HARNESS 20 PIN CONNECTOR
WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE
STEP 3 OBDII CONNECTOR
STEP 5
A E N.C. N.C. MAESTRO RR MODULE
C HO1 T-HARNESS G A F E CONNECTION NOT REQUIRED F SUB OUT C
AUX IN G
3
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Acura CSX WITH AMP WITHOUT NAV 2006-2011
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5 INSTALL GUIDE Acura CSX WITH NAV 2006-2008 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Acura CSX WITH NAV 2006-2008
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Acura CSX WITH NAV 2006-2008
INSTALLATION INSTRUCTIONS
STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • Unbox the aftermarket radio and locate its main harness. to the OFF position then disconnect all connectors from • Remove the factory radio. the module. Press and hold the module’s programming • Make the connections shown on the wiring diagram from button and connect all the connectors back to the module. the aftermarket radio main harness to the HO1 T-harness Wait, the module’s LED will fl ash RED rapidly (this may and match the wire functions. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail STEP 2 “[email protected]”. Visit us at “maestro.idatalink. • Connect the white junction plug of the HO1 T-harness to com/support” and “www.12voltdata.com/forum/” the 22 pin auxiliary harness. Connect the factory harness to the HO1 T-harness. • Connect the ORANGE/RED wire from the HO1 T-harness to the GREEN wire in pin 4 of the factory harness.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors into the aftermarket radio.
STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation.
1
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Acura CSX WITH NAV 2006-2008
WIRING DIAGRAM with Navigation STEP 1 STEP 4 RCA CABLES WHITE LF RCA INPUT WHITE/BLACK GRAY RF RCA INPUT GRAY/BLACK GREEN LR RCA INPUT GREEN/BLACK PURPLE RR RCA INPUT PURPLE/BLACK BLUE/WHITE - AMP. TURN ON (+) MAIN CONNECT TO BLACK - GROUND HARNESS AFTERMARKET RADIO RED - ACCESSORY (+) YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE YELLOW/BLACK - FOOT BRAKE COLORS RCA CABLES
AUX IN
CONNECT IF EQUIPPED STEP 2 FACTORY RADIO HARNESS 22 PIN GREEN CONNECTOR
WIRES FROM VEHICLE
STEERING WHEEL CONTROL CABLE
WIRE SIDE VIEW
1 2 3 4 5
ORANGE/RED GREEN
STEP 3 OBDII CONNECTOR
STEP 5
A E
N.C. MAESTRO RR MODULE
C HO1 T-HARNESS G A F E CONNECTION NOT REQUIRED F SUB OUT C
AUX IN G
1
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Acura CSX WITH NAV 2006-2008
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5 INSTALL GUIDE Acura CSX WITHOUT AMP WITHOUT NAV 2006-2011 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Acura CSX WITHOUT AMP WITHOUT NAV 2006-2011
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Acura CSX WITHOUT AMP WITHOUT NAV 2006-2011
INSTALLATION INSTRUCTIONS
BEFORE INSTALLING TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • To determine if the vehicle is equipped with a factory to the OFF position then disconnect all connectors from amplifi er, look at the rear deck. If there is a subwoofer the module. Press and hold the module’s programming present in the rear deck, the vehicle has an amplifi er. If button and connect all the connectors back to the module. there are only two speakers in the rear deck, it is NOT Wait, the module’s LED will fl ash RED rapidly (this may amplifi ed. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • Remove the factory radio. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. STEP 1 com/support” and “www.12voltdata.com/forum/” • Unbox the aftermarket radio and locate its main harness. • Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2 • Connect the white junction plug of the HO1 T-harness to the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation.
4
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Acura CSX WITHOUT AMP WITHOUT NAV 2006-2011
WIRING DIAGRAM without an Amplifier STEP 1
CUT AND REMOVE THE RCA JACKS STEP 4
WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) MAIN GRAY/BLACK - RF SPEAKER (-) HARNESS CONNECT TO GREEN - LR SPEAKER (+) AFTERMARKET RADIO GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP. TURN ON (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE RCA CABLES YELLOW/BLACK - FOOT BRAKE COLORS CONNECT IF EQUIPPED
AUX IN
STEP 2 FACTORY RADIO HARNESS 20 PIN CONNECTOR
WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE
STEP 3 OBDII CONNECTOR
STEP 5
A E N.C. N.C. MAESTRO RR MODULE
C HO1 T-HARNESS G A F E CONNECTION NOT REQUIRED F SUB OUT C
AUX IN G
4
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Acura CSX WITHOUT AMP WITHOUT NAV 2006-2011
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5 INSTALL GUIDE Honda Civic WITH AMP WITHOUT NAV 2006-2011 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Civic WITH AMP WITHOUT NAV 2006-2011
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Honda Civic WITH AMP WITHOUT NAV 2006-2011
INSTALLATION INSTRUCTIONS
BEFORE INSTALLING TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • To determine if the vehicle is equipped with a factory to the OFF position then disconnect all connectors from amplifi er, look at the rear deck. If there is a subwoofer the module. Press and hold the module’s programming present in the rear deck, the vehicle has an amplifi er. If button and connect all the connectors back to the module. there are only two speakers in the rear deck, it is NOT Wait, the module’s LED will fl ash RED rapidly (this may amplifi ed. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • Remove the factory radio. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. STEP 1 com/support” and “www.12voltdata.com/forum/” • Unbox the aftermarket radio and locate its main harness. • Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2 • Connect the white junction plug of the HO1 T-harness to the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation.
3
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Honda Civic WITH AMP WITHOUT NAV 2006-2011
WIRING DIAGRAM with an Amplifier STEP 1 STEP 4 RCA CABLES WHITE LF RCA INPUT WHITE/BLACK GRAY RF RCA INPUT GRAY/BLACK GREEN LR RCA INPUT GREEN/BLACK PURPLE RR RCA INPUT PURPLE/BLACK BLUE/WHITE - AMP. TURN ON (+) MAIN CONNECT TO BLACK - GROUND HARNESS AFTERMARKET RADIO RED - ACCESSORY (+) YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE YELLOW/BLACK - FOOT BRAKE COLORS
RCA CABLES
CONNECT IF EQUIPPED
AUX IN
STEP 2 FACTORY RADIO HARNESS 20 PIN CONNECTOR
WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE
STEP 3 OBDII CONNECTOR
STEP 5
A E N.C. N.C. MAESTRO RR MODULE
C HO1 T-HARNESS G A F E CONNECTION NOT REQUIRED F SUB OUT C
AUX IN G
3
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Honda Civic WITH AMP WITHOUT NAV 2006-2011
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5 INSTALL GUIDE Honda Civic WITH NAV 2006-2008 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Civic WITH NAV 2006-2008
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Honda Civic WITH NAV 2006-2008
INSTALLATION INSTRUCTIONS
STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • Unbox the aftermarket radio and locate its main harness. to the OFF position then disconnect all connectors from • Remove the factory radio. the module. Press and hold the module’s programming • Make the connections shown on the wiring diagram from button and connect all the connectors back to the module. the aftermarket radio main harness to the HO1 T-harness Wait, the module’s LED will fl ash RED rapidly (this may and match the wire functions. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail STEP 2 “[email protected]”. Visit us at “maestro.idatalink. • Connect the white junction plug of the HO1 T-harness to com/support” and “www.12voltdata.com/forum/” the 22 pin auxiliary harness. Connect the factory harness to the HO1 T-harness. • Connect the ORANGE/RED wire from the HO1 T-harness to the GREEN wire in pin 4 of the factory harness.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors into the aftermarket radio.
STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation.
1
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Honda Civic WITH NAV 2006-2008
WIRING DIAGRAM with Navigation STEP 1 STEP 4 RCA CABLES WHITE LF RCA INPUT WHITE/BLACK GRAY RF RCA INPUT GRAY/BLACK GREEN LR RCA INPUT GREEN/BLACK PURPLE RR RCA INPUT PURPLE/BLACK BLUE/WHITE - AMP. TURN ON (+) MAIN CONNECT TO BLACK - GROUND HARNESS AFTERMARKET RADIO RED - ACCESSORY (+) YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE YELLOW/BLACK - FOOT BRAKE COLORS RCA CABLES
AUX IN
CONNECT IF EQUIPPED STEP 2 FACTORY RADIO HARNESS 22 PIN GREEN CONNECTOR
WIRES FROM VEHICLE
STEERING WHEEL CONTROL CABLE
WIRE SIDE VIEW
1 2 3 4 5
ORANGE/RED GREEN
STEP 3 OBDII CONNECTOR
STEP 5
A E
N.C. MAESTRO RR MODULE
C HO1 T-HARNESS G A F E CONNECTION NOT REQUIRED F SUB OUT C
AUX IN G
1
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Honda Civic WITH NAV 2006-2008
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5 INSTALL GUIDE Honda Civic WITHOUT AMP WITHOUT NAV 2006-2011 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda Civic WITHOUT AMP WITHOUT NAV 2006-2011
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Honda Civic WITHOUT AMP WITHOUT NAV 2006-2011
INSTALLATION INSTRUCTIONS
BEFORE INSTALLING TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • To determine if the vehicle is equipped with a factory to the OFF position then disconnect all connectors from amplifi er, look at the rear deck. If there is a subwoofer the module. Press and hold the module’s programming present in the rear deck, the vehicle has an amplifi er. If button and connect all the connectors back to the module. there are only two speakers in the rear deck, it is NOT Wait, the module’s LED will fl ash RED rapidly (this may amplifi ed. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • Remove the factory radio. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. STEP 1 com/support” and “www.12voltdata.com/forum/” • Unbox the aftermarket radio and locate its main harness. • Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2 • Connect the white junction plug of the HO1 T-harness to the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation.
4
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Honda Civic WITHOUT AMP WITHOUT NAV 2006-2011
WIRING DIAGRAM without an Amplifier STEP 1
CUT AND REMOVE THE RCA JACKS STEP 4
WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) MAIN GRAY/BLACK - RF SPEAKER (-) HARNESS CONNECT TO GREEN - LR SPEAKER (+) AFTERMARKET RADIO GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP. TURN ON (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE RCA CABLES YELLOW/BLACK - FOOT BRAKE COLORS CONNECT IF EQUIPPED
AUX IN
STEP 2 FACTORY RADIO HARNESS 20 PIN CONNECTOR
WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE
STEP 3 OBDII CONNECTOR
STEP 5
A E N.C. N.C. MAESTRO RR MODULE
C HO1 T-HARNESS G A F E CONNECTION NOT REQUIRED F SUB OUT C
AUX IN G
4
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Honda Civic WITHOUT AMP WITHOUT NAV 2006-2011
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5 INSTALL GUIDE Honda CRV WITH NAV 2007-2009 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda CRV WITH NAV 2007-2009
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Honda CRV WITH NAV 2007-2009
INSTALLATION INSTRUCTIONS
STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • Unbox the aftermarket radio and locate its main harness. to the OFF position then disconnect all connectors from • Remove the factory radio. the module. Press and hold the module’s programming • Make the connections shown on the wiring diagram from button and connect all the connectors back to the module. the aftermarket radio main harness to the HO1 T-harness Wait, the module’s LED will fl ash RED rapidly (this may and match the wire functions. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail STEP 2 “[email protected]”. Visit us at “maestro.idatalink. • Connect the white junction plug of the HO1 T-harness to com/support” and “www.12voltdata.com/forum/” the 22 pin auxiliary harness. • Connect the factory harness to the HO1 T-harness. • Connect the subwoofer harness to the vehicle (if equipped). • Connect the ORANGE/RED wire from the HO1 T-harness to the GREEN wire in pin 4 of the factory harness.
STEP 3 • Connect the PINK/RED wire from the HO1 T-harness to the BLUE wire in pin 2 at the Bluetooth module, located below the radio, in the center of the dash.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors into the aftermarket radio.
STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation.
2
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Honda CRV WITH NAV 2007-2009
WIRING DIAGRAM with Navigation STEP 1 STEP 5 RCA CABLES WHITE LF RCA INPUT WHITE/BLACK GRAY RF RCA INPUT GRAY/BLACK GREEN LR RCA INPUT GREEN/BLACK PURPLE RR RCA INPUT PURPLE/BLACK BLUE/WHITE - AMP. TURN ON (+) MAIN BLACK - GROUND HARNESS CONNECT TO RED - ACCESSORY (+) AFTERMARKET RADIO YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE YELLOW/BLACK - FOOT BRAKE COLORS RCA CABLES
CONNECT IF EQUIPPED STEP 2 FACTORY RADIO HARNESS AUX IN
SUB OUT CONNECT IF EQUIPPED WITH SUBWOOFER
22 PIN GREEN
WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE
WIRE SIDE VIEW 1 2 3 4 5
ORANGE/RED GREEN
STEP 3 BLUETOOTH UNIT UNDER RADIO PINK/RED - SWI 2 INSULATE WIRE (CONNECTOR SIDE)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 STEP 6
15 16 17 18 19 20 21 22 23 24 25 26 27 28 A E CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
MAESTRO RR MODULE STEP 4 OBDII CONNECTOR
C
G A F E F HO1 T-HARNESS C CONNECTION NOT REQUIRED
AUX IN G
2
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Honda CRV WITH NAV 2007-2009
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5 INSTALL GUIDE Honda CRV WITHOUT NAV 2007-2011 Retain steering wheel controls, factory amplifier and more!
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SR)-HON01-AS iDatalink Maestro HO1 Installation Harness
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Honda CRV WITHOUT NAV 2007-2011
WELCOME DURING INSTALLATION
Congratulations on the purchase Installation Instructions 3 of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram 4 now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features. 5
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 2 Honda CRV WITHOUT NAV 2007-2011
INSTALLATION INSTRUCTIONS
STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key • Unbox the aftermarket radio and locate its main harness. to the OFF position then disconnect all connectors from • Remove the factory radio. the module. Press and hold the module’s programming • Make the connections shown on the wiring diagram from button and connect all the connectors back to the module. the aftermarket radio main harness to the HO1 T-harness Wait, the module’s LED will fl ash RED rapidly (this may and match the wire functions. take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail STEP 2 “[email protected]”. Visit us at “maestro.idatalink. • Connect the white junction plug of the HO1 T-harness to com/support” and “www.12voltdata.com/forum/” the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3 • Plug the OBDII connector into the OBDII of the vehicle, under driver dash.
STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Plug the steering wheel control cable into the aftermarket radio. • Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation.
5
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 3 Honda CRV WITHOUT NAV 2007-2011
WIRING DIAGRAM without an Amplifier STEP 1
CUT AND REMOVE THE RCA JACKS STEP 4
WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) MAIN GRAY/BLACK - RF SPEAKER (-) HARNESS CONNECT TO GREEN - LR SPEAKER (+) AFTERMARKET RADIO GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP. TURN ON (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW - 12V (+) ORANGE - PARKING LIGHT (+) SEE RADIO PURPLE/WHITE - REVERSE LIGHT (+) WIRE REFERENCE LTGREEN - E-BRAKE (-) CHART FOR PINK - VEHICLE SPEED RADIO WIRE RCA CABLES YELLOW/BLACK - FOOT BRAKE COLORS CONNECT IF EQUIPPED
AUX IN
STEP 2 FACTORY RADIO HARNESS 20 PIN CONNECTOR
WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE
STEP 3 OBDII CONNECTOR
STEP 5
A E N.C. N.C. MAESTRO RR MODULE
C HO1 T-HARNESS G A F E CONNECTION NOT REQUIRED F SUB OUT C
AUX IN G
5
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 4 Honda CRV WITHOUT NAV 2007-2011
RADIO WIRE REFERENCE CHART
Wire Wire Color on Maestro Polarity Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Description T-Harness
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
Automotive Data Solutions Inc. © 2017 ADS-RR(SR)-HON01-AS maestro.idatalink.com 5