2

AL8/1, AL801 ALUMINIUM POWERSKIRTING

Suitable for office environments and light industrial applications LIGHTWEIGHT! Aluminium Power Skirting is extremely light making it easy to handle and install whilst remaining strong & rigid! Powerskirting can be used 3000mm standard length as 1, 2, 3 or multiple tiers AL8/1 covers supplied separately & fixed with blue SEZ clips at 400mm centres Utilises standard outlets (available for all standard single & double accessories Aesthetic textured powder coating in standard or special colours (to order) Aesthetic textured powder coating options Optional clip-in divider available for all compartments

Motor Craft Carrier Hammertone White Easter Oak Hospital Satin Black Grey Beige Grey Grey Smooth Finish AL8/1 + AL801 = AL8/3 AL801 Duct 57 x247.5 x 3000mm 57 x 165 x 3000mm Fabricated Aluminium Accessories Standard Body Purpose mitre cut aluminium Configurations bodies to form accessories Double Stacked manufactured to order Splice pieces for AL8/1 = AL801 powerskirting body Splice pieces for supplied separately bodies supplied separately StandardSteel Accessories Accessories shown are for Series P801. Internal elbows not required. Accessories for N8/1 & N8/3 are also available

57

Single duct can be stacked with two tier duct to form a multiple AL8/1 tier duct. Duct 57 57 x 82.5 x 3000mm External Internal Elbow/ End Cap Flat Elbow Elbow Standard Tee

Outlet Cover Kits - Order Cradle Separately 247.5

Modular 57 Crabtree Diamond 165 Classic Clipsal & Thynk Veti Optional 15A 15A 50 x 50 SSO clip-in 13A 13A 50 x 75 3 Module divider 82.5 2 x 13A 1 Lever Duct Divider 2 Lever 2 Lever Blank Flat Tee (31 x 21 x 3000mm)

SEZ® Clip No More Pulling through of cables . All internal and external elbows are fitted AFTER the wiring is complete!

A comprehensive range of outlets and accessories are available

Readily available outlets and accessories in various design options are simply clipped in place before colour matched Outlet or accessory cover plates are screwed on. See pages 11-13 on appropriate cradle Matching Cover Plate 3

N8/1, P801 & P803 POWERSKIRTING

Suitable for office environments and light industrial applications Floor level or dado rail installation Distribute power and data simultaneously in dedicated channels

3000mm standard length Texture powder coated galvanised steel is RUST PROOF and available in a range of six attractive colours Covers, Elbows, Tees and End Caps are colour matched for a professional finish A comprehensive range of outlets and accessories are available Aesthetic textured powder coating options Separate serviceswith drop in Duct Dividers Rivet assembly (TOX) - no spot welding for straighter lines and more accurate installation Motor Craft Carrier Hammertone White Easter Oak Hospital Satin Black Grey Beige Grey Grey Smooth Finish N8/P803 Body N8/P801 Body (Fixed Splice) (Fixed Splice) RUST FREE! 55 x 244 x 3000mm 55 x 165 x 3000mm Series 8 Powerskirting is manufactured from Z275 galvanised steel, epoxy powder coated on visible Standard Accessories Accessories shown are for Series N8/P801. surfaces only. Accessories for N8/1 & N8/P803 are also available.

55 Standard Body Configurations (N8/1 can be double stacked) 51 N8/1 Body 55 (Loose Splice) External Elbow Internal Elbow/ End Cap Flat Elbow 55 x 82,5 x 3000mm Standard Tee

51 Outlet Cover Kits - Order Cradle Separately 244 51

Modular 55 Crabtree Diamond Classic Clipsal & Thynk Veti Lesco 165 15A 15A 50 x 50 SSO 15A 13A 13A 50 x 75 3 Module 51 51 51.5 82.5 2 x 13A 1 Lever Duct Divider 2 Lever 2 Lever Blank 2 Lever Flat Tee (3000mm)

SEZ® Clip No More Pulling through of cables . All internal and external elbows are fitted AFTER the wiring is complete!

A comprehensive range of outlets and accessories are available

Readily available outlets and accessories in various design options are simply clipped in place before colour matched Outlet or accessory cover plates are screwed on. See pages 11-13 Matching Cover Plate on appropriate cradle 4

PLATINUM PVC POWERSKIRTING

Suitable for office environments and light industrial applications. LIGHTWEIGHT & EASY TO INSTALL! PLATINUM PVC Power Skirting with features seen in European systems. Strong, light and rigid making it easy to install. 3000mm standard length. PLATINUM PVC Power Skirting is cost efficient and practical. Pre-punched at 260mm centres for easy installation. Clean, aesthetic lines available in white, grey or black offer low maintenance and are able to withstand minor impact without denting or chipping. Full installation instructions are supplied with PLATINUM PVC Power Skirting.

EP202 Duct Standard colours: 55 x 160 x 3000mm C/W Covers

POZI-LOCK COVER 55 (Top & Bottom Locking System)

Grey White Black

52 55 Standard Accessories A complete range of colour matched accessories are available for a professional finish. Push accessories firmly onto duct cover and fit 160 from the front after wiring. Permanent fixing with PVC weld can be used if required.

52 100 52

Internal Elbow External Elbow EP201 Duct 55 x 100 x 3000mm C/W Covers Pre-punched at 260mm centres for easy installation

Outlet Cover Kits - Supplied with Cradle & Screws Modular Crabtree Diamond Legrand Classic Clipsal & Thynk Mosaic Veti 15A 15A 50 x 50 2 Module SSO Flat Tee Flat Elbow 2 Lever 2 Lever 50 x 75 3 Module 3 Module Blank Universal En Capd Cover Joining Clip

Platinum duct is supplied with protective tape on all covers and top side. Generic PVC Cradle

Outlet or accessory on appropriate cradle

Retaining Screws A comprehensive range of outlets and accessories is available. Matching Cover Plate See pages 11-13 5

EXECUDUCT MKII PVC POWERSKIRTING

EXECUDUCT MkII is suitable for all environments especially the traditional office and light industrial applications. EXECUDUCT MkII is a unique modular system allowing single and double tier ducts to be combined to form a market leading triple tier duct system for the even heaviest wiring requirements. Floor level or dado rail installation.3000mm standard length . EXECUDUCT MkII draws inspiration from the best of traditional powerskirting systems with clean, square lines and improved ease of installation. Available in grey or white. 55 Standard colours: EXECUDUCT MkII is robust durable and cost effective.

Clean, aesthetic lines available in white or grey offer low POZI-LOCK COVER maintenance and are able to withstand minor impact (Top & Bottom Locking System) without denting or chipping. Grey White EXECUDUCT MkII PVC Powerskirting is lead free ® making it an environmentally sound option for any ‘green’ 55 Execu duct building requirement. Exec duct MkII

247,5

EDM211 Duct 55 Standard Accessories 55 x 165 x 3000mm C/W Covers 165 A complete range of colour matched accessories are available for a professional finish. Push accessories firmly onto duct cover and fit from the front after wiring. Permanent fixing with PVC weld 82.5 can be used if required.

Single duct can be EDM211 Double Duct EDM201 Single Duct stacked on top of a 55 x 165 x 3000mm 55 x 82.5 x 3000mm two tier duct to form C/W Covers C/W Covers a three tier duct. Internal External Elbow Elbow

Flat Elbow

EDM201 Duct 55 x 82.5 x3000mm C/W Cover Universal Cover Joining Flat Tee dEnCap Clip

EXECUDUCT MkII PVC Power Skirting is supplied with protective tape on all covers and top side. Generic PVC Cradle

Outlet or accessory on appropriate cradle

A comprehensive range of outlets and accessories is available. Retaining Screws See pages 11-13 Matching Cover Plate 6

STATION MASTER UTILITY POLE & UNIMOD TOWER

STATION MASTER Standard Pole Kit 3000, 3500, 4000 and 4500mm standard lengths 57mm diameter, 4 compartment Pole kit comprises: Pole, PVC Pole covers, base plate, ceiling with flange and jack assembly Covers 5000mm, 5500mm and 6000mmm made to order Ceiling Base Jack Flange Plate Assembly

UNIMOD TOWER Modules 4, 8 or 12 outlets stack 2, 3 Installs on a standard or more floor duct outlet, high conduit floor box or stand-alone steel base unit (supplied separately) 600mm high CLIP-ON KIT! Other heights Eliminates the need for manufactured to order screws and cover plates. Quicker and easier to install!

Unimod Outlet Kit One kit fits Poles & Towers Accepts all modular accessories Modules can be stacked Kit contains body, universal cradle , two plastic end covers & divider Old style non-modular (traditional) kits also available

Readily available outlets and accessories are available. See pages 11-13

Standard Accessories

For Conduit Box See Page 7

Pole Cover Kits Unimod Blank Traditional Unimod Outlet Kit Modular Outlet Kit Outlet Kit Pre-etched to Crabtree Diamond breakout for most Classic Clipsal & Thynk Veti accessories 15A 15A 50 x 50 SSO 13A 13A 50 x 75 3 Module 2 x 13A 1 Lever 2 Lever 2 Lever Blank 7

FLOOR RETICULATION

UNDER SCREED DUCTING SYSTEM ACCESS FLOOR/CONDUIT BOX SYSTEM (Sub-surface Outlets Protected from Damage) (Sub-surface Outlets Protected from Damage)

3000mm standard length System fits into access floor tile (208 x 288mm aperture) Breakout outlet points at 500mm centres Can also fit onto conduit floor box cast into the floor and fed by conduit Duct installed 35mm below surface level Overall depth 75mm minimum Galvanised (PG) 1,2mm construction PVC Carpet Alternative installation 8mm Inset method available on Frame & Lid 200 x 300mm request

CONDUIT BOX OUTLET KIT COMPRISING:

DUCT OUTLET KIT COMPRISING: Disposable Concrete Ingress Disposable Prevention Plate Concrete Ingress Prevention Plate

Screed Frame Conduit Box

Modular Outlet Plates Modular Outlet Plates

3UAA Duct Conduit Access Floor Box 220 x 35 0mm Deep 205 x 287 x 79 or 100mm Deep

7 /1000

Fit Duct Outlet Kit to Duct prior to screeding 287 of Floor Duct

Standard Accessories External Splice (For cut lengths) Universal Modular Outlet Plate Order outlets separately. Modular outlets and accessories make this system user friendly Module combinations are totally flexible Manufactured from high impact PVC Internal Splice Flush lid features twin, flip-up cable (For standard outlet ports lengths) Lid is recessed to accept carpet or tile Readily available outlets and accessories are available. 3UA Universal Drawbox See pages 11-13 300 x 300 x 65mm 8

FLOOR RETICULATION

3F FLOOR DUCT- FLUSH DUCTING WITH SURFACE MOUNTED OUTLET PEDESTALS

3000mm standard length Removable outlet covers at 1000mm centres Galvanised (PG) 2mm top and 1mm base Aesthetic textured 31mm installation depth powder coating options FD2, FD3 & FD4 pedestals can be fitted

31 Motor Craft Grey Carrier Beige Hammertone Grey

75 65 75 White Easter Oak Hospital Grey Satin Black Smooth Finish FLOOR BOXES FD3 Pedestal 230 x 140 x 75mm POP-UP PEDESTAL Order boxes, pedestals, covers Brushed aluminium finish and outlets separately 150 x 150mm base frame Standard MOodular utlet 75 x 50mm FD2 Pedestal 140 x 150 x 75mm

FD3/4 Pedestal Conduit Box Ingress 117 x 210 x 38mm Prevention Plate FD2 Pedestal Conduit Box Modular outlets and 117 x 135 x 38mm accessories make this system user friendly.

FD 4 Pedestal 150 x 255 x 75mm

Pedestal Cover Kits - Order Cradle Separately Modular Conduit Box Crabtree Diamond 115 x 115mm Classic Clipsal & Thynk Veti Lesco 15A 15A 50 x 50 N/A 15A 13A 13A 50 x 75 2 x 13A 1 Lever Support Bracket 2 Lever 2 Lever Blank 2 Lever

Readily available outlets and accessories are available. Standard Accessories External Splice Power See pages 11-13 (For cut lengths) Skirting Connector

Internal Splice (For standard lengths)

3F Universal Drawbox 300 x 300 x 65mm 9

WALL RETICULATION

Suitable for power, voice & data outlets Fit from front clip-on PVC covers Boxes suitable for single or double sided use Wall Box Order boxes, cradles, covers & outlets separately (for dry or brick walls)

Surface Mounted Outlet (PVC, Steel or Epoxy Coated) with 9 Way Outlet Plates

275mm

Flush Mount PVC Wall Box (Only available in single)

157mm

Clip-in Divider 2 Tier Option

Blanking Plate

Locating Tabs Universal Floating 62/88mm Cradle 275mm

9 Way Outlet Plate

Wall Box

66mm

For Modular Outlets & Accessories see pages 11-13 10

OUTLETS & ACCESSORIES

Crabtree THYNK

TM

Cabstrut offer a comprehensive range of electrical outlets, switches, covers and accessories that are compatible with all Cabstrut wiring and reticulation products.

We source from the biggest manufacturers in South Africa and we always have stock on hand.

Cover plates for our powerskirting ranges are colour matched and custom designed to suit all accessory brands.

All products are Safe House approved and fully compliant with local, electrical specifications and SABS standards.

Suppliers you can trust 16

EUBIQ GSS POWER TRACK

The Complete System High quality adaptors made of fire-retardant polycarbonate CLASSIC ADAPTOR RANGE feature a raised pin which Only available while stocks last ensures use in primary power circuits only. 13A 15A

Dedicated power adaptors 15A Dedicated suit secondary power circuits only.

Secondary power circuits feature a plastic beading preventing primary adaptors from being used.

Live Core

Grounded Sentry Shutter PREMIUM ADAPTOR RANGE TM eubiq Available in standard and dedicated outlets. (as shown above) 15A stock, others to order. Entire body is 15A 15A 2 Pin Surge Protector USB Charger grounded

Neutral Core

Ultra Safe! Patented GSS™ (Grounded Sentry Shutter) system is one of the safest systems in the world. Standard Accessories

A Complete Range of DS3 DS4 Multimedia Data/Tel Holder Data/Tel Connectors (Flush) Holder PLT 15A is Available Not suitable (Proud) Plugtop for SH1 Fused 13A For use with SFC2 N 007S based tracks CAT 5E Jack RJ45 (Data or Telephone)

CAT6 UTP Data TR50-MS TR50-TS Motion Sensor Toggle Switch Light Holder Light Holder

NS006 NS006 CF Lamp CF Lamp CCS-7 CCS-5 supplied separately supplied separately Coiled Cordset Coiled Cordset Figure 8 Mickey Mouse 17

EUBIQ SH1 HOUSING

F!ree yourself from fixed power outlets

Durable Premium finishing EMI shielded Built-in accessory rail Dado mid-height mounting Snap-on multimedia connectors Precise alignment of trunking runs with corner links Uninterrupted Power Supply (UPS) ready

29

SH1 with SFC2 Track Standard Finishing: NSB Natural Shot Blast Maximum Length: 3 00mm3

Screw on 100 Mounting

eubiqTM

For Adaptors see page 16

Skirting Wall Mount

SH1 with DS4 Data Holder DS3 Data Holder is not suitable for SH1

Recessed Track accepts towel SH1 with SFC2 rail and hooks (See page )21 Blank Cover DS4 Data Housing 18

EUBIQ DMS1 HOUSING

F!ree yourself from fixed power outlets Light & easy to install 40 Clean & aesthetic Configuration A ()Configuration A Configuration B SFC2 Power Safe GSS system Track Modular Power Cables

Data Cables

DS3 or DS4 150 Data Housing

()Configuration B SFC2 Power Track

Power Cables

SFC2 Blank Cover

SFC2 Power DS3 DS4 Track DMS1 Housing Data Data Housing Housing Track Retainer TM Insert & Rotate to install. Retainers eubiq clip together in pairs or more

DMS1/SH1 Corner Cap Installation 1 2 3

For Adaptors see page 16

Typical Housing Installation (DMS1 shown) Insert Snap on Cap Retainer Clips top and bottom Snap on Cap. Fit only after wiring is complete

SFC2 SFC2 External Power Track Power Track Corner Cap (Primary Power Circuit) (Primary Power Circuit)

Track Internal Retainer Corner Cap

SFC2 Power Track Blank Cover (Secondary Power Circuit) 19

EUBIQ RH1 & RH2 HOUSING (RECESSED DATA, POWER & CABLE MANAGEMENT) F!ree yourself from fixed power outlets

SFC2s Modular Track SFC2s Modular Track (Supplied separately) (Supplied separately) see page 15 see page 15

RH1 RH2

Installation can be done on table with a minimum thickness of 15mm INTEGRATED POWER & DATA SOLUTION Manufactured from natural anodised aluminium with polycarbonate Designed with the GSS System Power Track, the RH series is the accessories perfect solution for recessed power and data requirements. Power track and data outlets can be configured in any combination and The product is designed for easy installation, thus saving time and length to suit customer requirements labour cost. Maximum standard length 3600mm

RH1 For Adaptors see page 16 End Caps (Pair)

80

80

57

34 eubiqTM 20

EUBIQ VSF1 DESKTOP MODULES (POWER & DATA TRACKS WITH CLAMP OR BASE MOUNTING)

F!ree yourself from fixed power outlets VSF1-MB Base Mounting POWER & DATA TRACK Pre-assembled with SFC2 power track, data holders (x2 DS3) and 2m power cord Compatible with GSS adaptors and accessories (not included) 800 and 1000mm kits available standard stock Special lengths to order Natural Anodised finish

eubiqTM

VSF1-MC Clamp Mounting POWER & DATA TRACK For Adaptors see page 16

EUBIQ SOHO DESKTOP MODULES (POWER & DATA TRACK WITH CLAMP MOUNTING)

F!ree yourself from fixed power outlets Wall Desk Mount Clamp 1. Accessory Tray: Clears all clutter from the workspace 2. Cable Reel: Keep cables in place

1 SOHO is available in 1000, 1500, 1800 and 2000mm Retail Packs. Adaptors are not included(See page 16) . 30mm

140mm Standard Accessories 90° angle Desk clamp

Accessory Tray

2 Table thickness: 10-55mm Cable Reel 21

EUBIQ SH1 KIT (POWER TRACK WITH ACCESSORY RAIL) Free yourself from fixed power outlets!

Designed for use in any kitchen or household Compatible with GSS accessories Natural Anodised finish Easy to install 600 and 10 00mm SH1 Kits supplied with track, wall plugs and screws.

Recessed Track accepts towel rail and hooks CABINET

Min 18mm 29

For Adaptors see page 16 100

Standard Accessories

KH Kitchen Rails Kitchen Hook (set of 4) KH/400(400mm) KH/600 (600mm) 46

Min 40mm

WORKTOP 23

CAB-STRUT SUPPORT SYSTEMS CAB-STRUT Systems Go Anywhere! Cab-Strut is a rigid metal construction system which is a time and money saving alternative to conventional support methods. ! No Welding ! No Drilling ! 100% Adjustable ! 100% Reusable

Spring nut is inserted A 90 degree turn positions anywhere along continuous the serrated grooves in the slot. Rounded nut ends nut with the clamping permit easy insertion. ridges of the channel.

Tightening by a wrench, locks The fitting makes the the serrated teeth of the nut connection between any into the clamping ridge of the framing channels or as channel to make the strong, means for other attachments. vice-like connection.

Unique "Weldless" Connection

Hex-head bolt connects fitting to channel as it CHANNEL UTSN AVAILABLE WITH OR WITHOUT SPRINGS is threaded into spring nut Cab-Strut nuts for P1000 & P2000 CSN106/M6 CSN108/M8 Chamfer in the nut eases starting of the bolt. CSN110/M10 CSN112/M12 Nut teeth create a strong, vice-like grip when tightened against the inturned channel edges P1000 P2000 Resistance to slip 350 Kg 340 Kg Pull out strength 700 Kg 520 Kg Channel edges and the nut's tapered grooves SAFETY FACTOR: 2 act as guides to provide fool-proof alignment of connection Cab-Strut nuts for P4000 Nut teeth grip the channel's inturned edges, CSN406/M6 CSN408/M8 tying the channel sides together in a "box" CSN410/M10 CSN412/M12 configuration for added strength P3300 P4000 Resistance to slip 350 Kg 340 Kg Spring allows precision placement anywhere Pull out strength 500 Kg 480 Kg along the channel length, then holds the nut in SAFETY FACTOR: 2 position while the connection is completed CAB-STRUT CHANNELS & COMBINATIONS 24

41 41 41 41 18 10 10 10 10 10 10 10 7 41 41 7 7 7 10 10 10 10 41 41 18 41 19 41 19 21 7 21 7 8 9 10 P1000 P1000T P2000 P2000T P3300 P4000 Thickness 2,5mm. Thickness 2,5mm. Thickness 1,0 and 1,5mm. Thickness mm.1,6 Thickness 2,5mm. Thickness 1,5mm. Standard length: 5000mm Standard length: 5000mm Standard length: 5000mm. Standard length: 5000mm Standard length: 5000mm. Standard length: 5000mm. or 6000mm. or 6000mm. Slot size 25 x 11mm @ Slot size 28 x 14mm @ 50mm centres. P3300T (slotted) is also 50mm centres or 25 x available. 11mm @ 50mm centres. P1001 STOCK AVAILABLE. ALL OTHER SPECIAL CHANNELS MADE TO ORDER. Standard finish: Galvanised (PG). P1000 & P 3300 are also available in hot dipped galvanised (HDG). P1000 is available in Stainless Steel 304L, 316L & 3CR12 corrosion resistant steel all 2mm thick. P1001 P1001-A P1001-B For part numbers ofP2000 c ombination channels replace the P1 with P2. E.g.P1001 becomes P2001.

P1001-D P1001-3 P1001-A3 P1001-B3

P1001-C P1001-C3 P1001-C31 P1001-C32

P1001-C33 P1001-C4 P1001-C41 P1001-C42

P1003-1 P1004 P1002 P1001-C43 (100mm wide (70mm wide) (93mm wide) 43mm deep)

P1004-A P1003 P1001-D3 (124mm P4001 deep) (93mm wide)

P4002-1 P4002-2 (93mm wide) (70mm wide) P4003 P4004 25 CAB-STRUT CANTILEVER ARMS

Standard finish galvanised (HDG) For arms with channel inverted add 'A' to part Number. E.g. WAA150A. Channel used isCab-Strut P1000 NOTE: Cantilever Arms should be 50mm longer than the width of Econo-Arm is Cab-Strut P2000 slotted the cable tray to be supported Used for supporting cable tray, ladder and many other applications

* 100, 500 & 800 are Non-Stock Items 40 1 89mm Wrap Around (223 Series) 14Ø Part Number Length Design Load (kg) 89 WAA150 150 315 WAA200 200 310 WAA250 250 280 WAA350 350 260 1 2 135mm Wrap Around (223 Series) 40 Part Number Length Design Load (kg) WAA450 450 245 14Ø 40 WAA550 550 200 135 WAA650 650 160

3 Flat Plate Arm (254 Series) 159 2 Part Number Length Design Load (kg) FPA150 150 290 FPA200 200 280 FPA250 250 260 14Ø FPA350 350 240 FPA450 450 180 6 FPA550 550 155 40 3 FPA650 650 130 Flat Plate Econo-arm 14Ø All components on Aircon Sets (page 24) are available separately 159

40 4 Half Double (254 Series)

Part Number Length Design Load (kg) 4 159 8 HDA0550 550 240 HDA0650 650 200 HDA0850 850 160 HDA1050 1050 130

14Ø 5 5 Full Double (254 Series) 8

Part Number Length Design Load (kg) FDA0550 550 460 FDA0650 650 310 FDA0850 850 180 FDA1050 1050 150 11Ø 6 C 6 Tray Arms (249 Series) B

Part Number A mm B mm C 76 mm Design Load (kg) Old Part Number A TA150 152 49 x 1 160 P2491 TA229 229 70 x 2 148 P2492 TA305 305 87 x 3 136 P2494 TA381 381 108 x 4 124 P2495 7 x 33 TA457 457 126 x 5 112 P2497 TA610 610 164 x 7 100 P2500

914 Manhole Bracket Standard finish Galvanised (HDG) 26

CAB-STRUT AIRCON SETS NEW! Available in 450, 550, 600 & 650 lengths HARDWARE SUPPLIED WITH EACH KIT Available in HDG or EPC (Motor Craft Grey ) Sets comprise 2 x slotted cantilever arms, 2 x HEX back channels and all fixing hardware x 4NUT

ANTI VIBRATION PAD SHIELD HEX M10 FLAT SPRING M8 FLAT HDG (Available Separately) ANCHORS x 4 BOLT x 4 WASHER x 4 NUT x 4 WASHER 8x

CODE DESCRIPTION SET COMPRISES QTY/SET SET COMPRISES QTY/SET Slotted C/L Arms (FPA type) 450mm Length x 1.6mm M10 x 25mm Hex Bolt - EG 4 2 (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) Aircon Set 450mm Slotted 2 M10 x 8mm Long Spring Nut - EG 4 450mm x 250mm Long - HDG Cantilever Arm HDG Complete M8 Hex Nut - EG 4 I0005863 M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8

Slotted C/L Arms (FPA type) 550mm Length x 1.6mm M10 x 25mm Hex Bolt - EG 4 2 (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) Aircon Set5 50mm Slotted 2 M10 x 8mm Long Spring Nut - EG 4 550mm x 250mm Long - HDG Cantilever Arm HDG Complete M8 Hex Nut - EG 4 I0005864 M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8

Slotted C/L Arms (FPA type) 600mm Length x 1.6mm M10 x 25mm Hex Bolt - EG 4 2 (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) Aircon Set60 0mm Slotted 2 M10 x 8mm Long Spring Nut - EG 4 600mm x 250mm Long - HDG Cantilever Arm HDG Complete M8 Hex Nut - EG 4 I0005865 M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8

Slotted C/L Arms (FPA type) 650mm Length x 2.0mm M10 x 25mm Hex Bolt - EG 4 2 (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) Aircon Set6 50mm Slotted 2 M10 x 8mm Long Spring Nut - EG 4 650mm x 250mm Long - HDG Cantilever Arm HDG Complete M8 Hex Nut - EG 4 I0005866 M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8

EPC CODE DESCRIPTION SET COMPRISES QTY/SET SET COMPRISES QTY/SET Slotted C/L Arms (FPA type) 450mm Length x 1.6mm M10 x 25mm Hex Bolt - EG 4 2 Aircon Set 450mm Slotted (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) 2 M10 x 8mm Long Spring Nut - EG 4 450mm CantileverArm E PC ( B eige) x 250mm Long - HDG M8 Hex Nut - EG 4 I0005867 Complete M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8

Slotted C/L Arms (FPA type) 550mm Length x 1.6mm M10 x 25mm Hex Bolt - EG 4 2 Aircon Set5 50mm Slotted (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) 2 M10 x 8mm Long Spring Nut - EG 4 550mm CantileverArm E PC ( B eige) x 250mm Long - HDG M8 Hex Nut - EG 4 I0005868 Complete M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8

Slotted C/L Arms (FPA type) 600mm Length x 1.6mm M10 x 25mm Hex Bolt - EG 4 2 Aircon Set60 0mm Slotted (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) 2 M10 x 8mm Long Spring Nut - EG 4 600mm CantileverArm E PC ( B eige) x 250mm Long - HDG M8 Hex Nut - EG 4 I0005869 Complete M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8

Slotted C/L Arms (FPA type) 650mm Length x 2.0mm M10 x 25mm Hex Bolt - EG 4 2 Aircon Set6 50mm Slotted (P2000 Arm) Back Plate: 150mm x 45mm x 6mm - HDG M10 Flat Washer - EG 4 Backing Channel 41mm x 41mm x 2.0mm thick (P1000) 2 M10 x 8mm Long Spring Nut - EG 4 650mm CantileverArm E PC ( B eige) x 250mm Long - HDG M8 Hex Nut - EG 4 I0005870 Complete M10 x 75mm Shield Anchors - EG 4 M8 Flat Washer - EG 8 27 CAB-STRUT BRACKETS

Material: Unless otherwise noted, Cab-Strut fittings are pressed from Hole size,14mm diameter, Hole spacing: 20,5 mm from end of fitting, 48mm hot rolled, pickled and oiled plate or strip steel centre to centre: Fitting width: 40mm unless otherwise stated; Fitting thickness: 6mm unless otherwise stated Subject to commercial tolerances All dimensions subject to commercial tolerances. Standard Dimensions: The following dimensions apply to all fittings except where noted on the part drawing:

Flat Fittings P1061 A Ø A=7mm 89 P1062 137 185 A=9mm 232 P1063 P1065 P1066 P1067 P1941 A=11mm P1064 A=14mm 40 60g Ea. Thickness 5mm

90 90 136 83 83 136 P1924 43 P2079 43 P1036 90 P1031 90 P1028

136

90 136 232 64 138 P1979P1356 89 P1358 P138090 P1953 90 90 90

90°angle Fittings

41 89 51 90 P102648 P1068 57 P1325 P1326 P1458 105 41 36 105 58

51 89 P2484 96 96 102 136 (Replaces 102 P1034P1035 P1033 1331 P1037 90 90 & 1332) 50 50 51

89 98 90 138 90 90 107 137 P1038 P1357 58 P1359 P1993 104 P1727 41 41

51 48

“ " ShapeU

21 83

42 P1047 P4047 P1737 P1044 P4376 90 43 86 138 138 138

135 46

P4376-A 138 P4377 184 P1377 184 P2346 98

40 43 CAB-STRUT BRACKETS 28

“ " ShapeZ

95 21 88 41 P1450 3,5 27 27 Cable 54 P1045 P4045 P1347 P4347 Ladder 41 42 41 Hold-down 42 Bracket 89 95 41 54 Trolley Assembly Base Plates Slotted Fittings 51 71 P2750 76 48 98 40 53 Trolley 37 Assembly 60 P2072-S1 P2073/A 26 P1749 P1747 P1000 Channel Ø 7mm 200 38 100 80 100 17 38 67 Ideal for sliding doors, welding curtains etc. Slotted Fittings Beam Clamps 38 80 2x M10 89 57 P1130 M12 B A M12 A=170 38 B=66 35 28 22 P1713 P1270 P1271 41 P1272 64 P1131 10 89 48 A=220 M12 4B=11 95 40 32 Beam Clamps

M12 3mm Thick NEW P1272/U 76 Purlin 46 Flange 88 Clamp Clamp 6 P1796 48 8 ,or 10 21 6, 8,10 Accepts P2785 22 20 Threaded Rod 12mm or 12mm 10 Ø Max. 86 90 25/32 98 Beam Clamps Angle Fittings BEAM CLAMPS NEW 76 ARE NOT 49 O 41 RECOMMENDED 94 O 6 45 41 45O 45 FOR USE P1032 P1072 P1073 41 P2786 IN THE VERTICAL PLANE 138 127

Angle Fittings A B mm Cmm A B mm Cmm

96 O P1546 45° 58 76 P2097 60° 48 86 C ° 45 A P2094 82½° 43 91 P2098 52½° 52 83 B P1074 P1191 P1192 P2095 75° 43 91 P2099 37½° 46 89 P2096 67½° 46 89 P2100 37½° 67 68 68 68 96 45O 45O P1546 - P2100 Angle Fittings Variable Angle Fittings A B mm A P2101 30° 82 P1186 45° 102 P2105 82½° 54 Var. Var. P2102 22½° 82 B 80 A P2106 75° A P1843 P1354 P2103 15° 82 P2107 67½° P2104 7½° 82 P2108 60° P2109 52½° P2101 - P2104 64 P2110 37½° 64 54 102 P1186 - P2110 LOAD DATA FOR BRACKETS Channel Bearing Loads Connection Bearing Loads

LOAD LOAD

P1000 450 kg P1000 900 kg P1000 900 kg P1000 650 kg P2000 270 kg P2000 400 kg P2000 650 kg P2000 350 kg 700 kg

P1000 1 500 kg P1000 2 200 kg P2000 650 kg P2000 900 kg P4000 750 kg P4000 1 000 kg P1000 650 kg P1000 1300 kg P1000 450 kg Safety factor = 2.0 300 kg 300 kg P2000 450 kg P2000 680 kg P2000 220 kg 29 PIPE & CABLE CLAMPS

Split Clamps REF T A B C Standard finish galvanised (EG) Diameter (mm) (mm) (mm) (mm) C (M8/M10 Combi-nut) Rubber Insert SC/12-16 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 Pull strength 600kg Twist strength 8kg SC/15-19 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 SC/20-25 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 Material/Finish: SC/26-30 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 A Mild Steel Zinc-Electroplated (EG) SC/32-36 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 SC/38-43 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 Pipe Clamp Sizes: Diameter range stated is the SC/47-51 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 suitable pipe O.D range SC/53-58 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 B SC/60-64 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 Safe Working Load (tensile) : SC/68-72 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 200 kg SC/75-80 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 Sound Reduction: SC/81-86 ZP R/L 2.0 20.0 M6 x 20mm M8 / M10 18 dB (A) SC/87-92 ZP R/L 2.5 20.0 M6 x 20mm M8 / M10 T SC/99-105 ZP R/L 2.5 20.0 M6 x 20mm M8 / M10 Working Temperature Range: -40°C / +110°C SC/107-112 ZP R/L 2.5 20.0 M6 x 20mm M8 / M10 SC/113-118 ZP R/L 2.5 20.0 M6 x 20mm M8 / M10 Fire resistance: SC/125-130 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 Class B2 ( DIN 4102) SC/132-137 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 Rubber : EPDM Rubber SC/138-142 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 (Ethylene Propylene Diene SC/148-152 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 Monomer (M-class) rubber) SC/159-166 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 Thickness : 4 -5mm SC/200-212 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 SC/215-220 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 SC/249-254 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10 SC/314-319 ZP R/L 2.5 20.0 M6 x 25mm M8 / M10

Traditional 2/Piece TP 2/Piece Clamps Clamps Supplied as one piece including fastener Body and screw galvanised (EG) Designed for use with Cab-Strut Design load 200kg (safety factor of 5) Standard Finish: Galvanised (PG) channel Suitable for pipework and cables Fasteners (EG) Supplied separately Practical range of eleven convenient sizes Design Load Safety Factor of 5

Part Overall Bolt Material Number mmØ Size mm Thickness mm

TP15/20 15-20 M6 x 20 1,6 Fasteners Code Part No. Overall Ø Design Material TP20/25 20-25 M6 x 20 1,6 Required Load Thickness TP25/30 25-30 M6 x 20 1,6 Part No. Overall Ø Fasteners Design Material Required Load Thickness TP30/40 30-40 M6 x 20 2,0 TP40/50 40-50 M8 x 20 2,0 i0008986 P2025 8,5-10,0 180 kg 1,5mm TP50/60 50-60 M8 x 20 2,0 i0008985 P1108 10,5-12,5 180 kg 1,5mm TP60/70 60-70 i0008984 P2026 11,5-13,5 180 kg 1,5mm M8 x 20 2,0 M6 x 20mm TP70/80 70-80 M8 x 20 2,5 i0008983 P1108-A 10,5-14,0 Gutter Bolt 180 kg 1,5mm i0008982 P2027 14,5-16,5 & Nut 180 kg 1,5mm TP80/90 80-90 M8 x 20 2,5 i0008981 P1109 16,0-18,5 Required 180 kg 1,5mm TP90/100 90-100 M8 x 30 2,5 i0008980 P2028 17,0-19,5 180 kg 1,5mm TP100/110 100-110 M8 x 30 2,5 i0008979 P1111 21,0-25,5 180 kg 1,5mm TP110/120 110-120 M8 x 30 2,5 i0008978 P2030 25,5-28,0 180 kg 2,0mm TP120/130 120-130 M8 x 30 2,5 i0008977 P1112 27,0-30,0 270 kg 2,0mm i0008976 P2032 30,0-33,5 M6 x 25mm 270 kg 2,0mm Gutter Bolt i0008975 P1113 32,0-36,0 & Nut 270 kg 2,0mm Strap Clamps P2034 35,0-40,0 Required i0008974 270 kg 2,0mm Supplied with strap, studs, nuts, very flexible range of sizes i0008973 P1114 38,0-44,0 270 kg 2,0mm washers and collets Strap, studs, nuts, washers and collets i0008632 P1115 45,0-51,0 360 kg 2,5mm Designed for use withCab-Strut channel galvanised (EG) i0008972 P2038 49,0-52,0 360 kg 2,5mm Practical range of four convenient straps Suitable for large diameter poles and M8 x 35mm which are fully adjustable and offer a pipes i0008971 P2039 51,0-56,0 Hex Set 360 kg 2,5mm Part i0008631 P1117 54,0-70,0 Screw & 360 kg 2,5mm Diameter Strap Thread Stud M8 Hex Nut Number Length Size Length i0008970 P2043 62,0-75,0 Required 360 kg 2,5mm i0008630 P1118 71,0-85,0 360 kg 2,5mm T1STCL/75-100 MM/EG 75-100mm 160mm M10 85mm i0008629 P1119 87,0-95,0 360 kg 2,5mm T1STCL/100-125MM/EG 100-125mm 200mm M10 95mm i0001891 P1120 99-110 M10 x 50mm 360 kg 2,5mm T1STCL/125-150MM/EG 125-150mm 230mm M10 115mm i0001892 P1121 110-122 Hex Set 360 kg 2,5mm T1STCL/150-175MM/EG 150-175mm 295mm M10 120mm Screw & T1STCL/175-200MM/EG 175-200mm 325mm M10 135mm i0001893 P1122 116-140 M10 Hex Nut 360 kg 2,5mm i0001894 P1123 135-145 Required 360 kg 2,5mm i0001895 P1124 141-175 360 kg 3,0mm M10 x 60mm i0001896 P1125 160-200 Hex Set 360 kg 3,0mm i0001897 P1126 196-230 Screw & 360 kg 3,0mm i0001898 P1127 225-270 M10 Hex Nut 360 kg 3,0mm Required i0001899 P1129 245-280 360 kg 3,0mm PIPE & CABLE CLAMPS 30

“Q” Clamps P75 Hanger Clamps E Light and strong Standard finish galvanised (PG) (Thread Rod) Body galvanised (SG) Fasteners (EG) Screw galvanised (SG) Suitable for hanging plumbing, drainage D One common clamp for all applications and sprinkler pipes C Part A B C D E B Clamp Bolt B Ø Clamp Bolt B Ø A Size Size (mm) Size Size (mm) Number (mm) (mm) (mm) (mm) (mm)

Q16mm M6 16 Q52mm M8 52 P75/15 15 52 25 1,6 M8 Q20mm M6 20 Q58mm M8 58 P75/20 20 57 25 1,6 M8 Q26mm M6 26 Q66mm M8 66 P75/25 25 68 25 1,6 M8 Q32mm M6 32 Q70mm M8 70 P75/32 32 75 25 1,6 M8 Q40mm M8 40 Q78mm M8 78 P75/40 40 87 25 1,6 M8 Q46mm M8 46 P75/50 50 110 25 1,6 M8 Wire Mesh P75/65 65 118 25 2,0 M10 Tray Application P75/80 80 129 25 2,0 M10 P75/100 100 152 25 2,0 M10 B P75/125 125 194 25 2,5 M10 P75/150 150 228 25 3,0 M10 P75/200 200 295 30 3,5 M12

Cable Ladder Cross Rung Angle Iron Cabstrut Channel

Saddle Clamps Aluminium Trefoil Clamps Standard finish galvanised (PG) No magnetic circuit can be created in aluminium Trefoil clamps. Can withstand a rupturing Part Diameter A Mat. Bolt Part Diameter A Mat. Bolt capacity of 95kA at 750mm spacings. No. (mm) (mm) (mm) No. (mm) (mm) (mm) Part Cable Size Mat. Bolt SS1 21 0,8 M6 SS1/7 88 1,2 M8 No. A (mm) (mm) (mm) SS1/1 26 0,8 M6 SS1/8 101 1,2 M8 SS1/2 34 1,0 M6 SS1/9 114 2,0 M8 TR-30 30 4,5 M6 SS1/3 42 1,0 M6 SS1/10 142 2,0 M8 TR-37 37 4,5 M6 SS1/4 48 1,0 M6 SS1/11 173 2,0 M8 TR-42 42 4,5 M6 M6 Hi-tensile SS1/5 60 1,0 M6 SS1/12 225 2,0 M8 TR-48 48 4,5 M6 Bolt (EG) SS1/6 76 1,2 M6 TR-53 53 4,5 M6 TR-57 57 4,5 M6 TR-63 63 4,5 M6

AØ AØ HDG Base Plate

Cable Diameter/ assM Approximate calculated dimension Approximate calculated dimension Approximate calculated dimension and nett mass per 100 metres and nett mass per 100 metres and nett mass per 100 metres Rated Number Max. Nett Gland Rated Number Max. Nett Gland Rated Number Max. Nett Gland area of overall mass to area of overall mass to area of overall mass to mm2 cores dia. mm kg/100m suit mm2 cores dia. mm kg/100m suit mm2 cores dia. mm kg/100m suit

1,5 2 13,7 33 0 6 3 19,6 77 1 35 3 33,2 295 4 3 14,2 37 0 4 20,9 89 1 50 4 36,5 367 4 4 15,1 41 0 2 20,7 85 1 3 36,5 275 4 7 17,6 55 1 10 3 21,9 99 2 70 4 40,2 471 4 12 22,9 89 2 4 23,4 117 2 3 41,3 486 4 2,5 2 14,5 39 0 2 23,1 108 2 95 4 45,2 610 5 3 16,1 43 0 16 3 25,9 149 2 3 43,7 567 5 4 16,9 51 1 4 27,9 176 3 120 4 47,9 716 5 7 20,0 79 2 2 22,4 113 2 3 47,4 685 5 4 2 16,8 49 0 25 3 26,9 173 3 150 4 53,7 922 6 3 17,5 55 1 4 29,1 211 3 3 53,0 864 6 4 19,4 75 1 2 23,9 138 2 185 4 58,7 1092 6 7 22,5 101 2 35 3 28,8 213 3 3 59,2 1076 6 6 2 18,6 67 1 4 32,5 283 4 240 4 66,7 1438 7 31 CAB-STRUT CONCRETE INSERTS

Cab-Strut concrete inserts offer a practical solution for the provision of mechanical fastening into concrete walls and ceilings.

LOAD DATA - Recommended loading on inserts in average good concrete, with a safety factor of two, is as follows:

P32/300to P32/ 0006 - P33/300to P336 / 000 - 580kg per 300mm length. 460kg per 300mm length.

P3200 thickness 2,5mm. P3300 thickness 2,5mm. Standard length: 5000mm or Standard length: 5000mm or 6000mm. 6000mm.

Lugs at 100mm centres Lugs at 100mm centres

41 41 21

79

41

CAB-STRUT DESIGN DATA

DEFLECTION AT WORKING STRESS (mm)

BEAM SPAN OR BEAM SPAN COLUMN UNSUPPORTED COLUMN HEIGHT (mm)

PRODUCT

UDL (Kg) AT WORKING UDL (Kg) AT STRESS 125 n/MM²

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/200 SPAN

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/360 SPAN

MAXIMUM LOADING OF COLUMN (Kg) OF COLUMN S.F. 1,6 S.F.

COLUMN LOAD AT LOAD COLUMN SLOT FACE S.F. 1,6 S.F. FACE SLOT

DEFLECTION AT WORKING STRESS (mm)

BEAM SPAN OR BEAM SPAN COLUMN UNSUPPORTED COLUMN HEIGHT (mm)

PRODUCT

UDL (Kg) AT WORKING UDL (Kg) AT STRESS 125 n/MM²

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/200 SPAN

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/360 SPAN

MAXIMUM LOADING OF COLUMN (Kg) OF COLUMN S.F. 1,6 S.F.

COLUMN LOAD AT LOAD COLUMN SLOT FACE S.F. 1,6 S.F. FACE SLOT P 1000 1264 0,17 — — 4268 1216 P 1000 180 8.4 — 104 1620 829 P 2000 899 0,2 — — 2714 844 P 2000 127 8.6 — 72 880 512 250 1750 P 3300 395 0,33 — — 2857 745 P 3300 56 15.9 31 17 — — P 4000 305 0,33 — — 1872 559 P 4000 43 16.2 23 13 — — P 1000 632 0,83 — — 4105 1202 P 1000 158 11.0 144 80 1365 757 P 2000 446 0,7 — — 2622 835 P 2000 111 11.2 100 55 716 452 500 2000 P 3300 197 1,3 — — 2523 720 P 3300 49 20.8 20 14 — — P 4000 152 1,3 — — 1686 542 P 4000 38 21.2 18 10 — — P 1000 421 1,54 — — 3755 1170 P 1000 140 13.8 114 63 1172 694 — — 79 750 P 2000 297 1,6 2410 812 2250 P 2000 99 14.2 44 599 402 P 3300 131 3,0 — — 1894 657 P 3300 44 26.2 18 10 — — P 4000 101 3,0 — 94 1336 499 P 4000 33 26.7 — — — — P 1000 316 2,1 — 71 3131 1102 P 1000 126 17.1 92 37 1021 638 P 2000 2,8 — — 89 17.5 64 35 512 361 1000 224 1976 756 2500 P 2000 P 3300 98 5,2 95 222 1258 559 P 3300 39 32.3 15 8 — — P 4000 76 5,3 70 55 924 428 P 4000 30 33.0 — — — — P 1000 252 4,3 — 40 2467 1006 P 1000 114 20.7 76 42 — — P 2000 178 4,3 — 142 1480 670 P 2000 81 21.1 52 29 — — 1250 2750 P 3300 79 8,1 61 33 856 463 P 3300 35 39,0 12 7 — — P 4000 61 8,2 46 25 637 354 P 4000 27 40.0 — — — — P 1000 210 6,2 — 142 1970 912 P 1000 105 34.6 64 35 — — P 2000 148 6,3 — 98 P 2000 74 25.2 44 24 — — 1500 1121 585 3000 P 3300 65 11,7 42 23 — — P 3300 32 46.5 10 5 — — P 4000 50 12,0 32 17 — — P 4000 25 47.0 — — — — GRIPPLE HANGERS 32 www.gripple.com The Revolutionary Wire Hanger System Gripple Hangers are easy to use and install, saving Serrated Teeth time and money Stainless Springs (type 302 S26) End Cap Strong yet lightweight Gripple Hangers s requ Zinc Housing ol ir have no joints, are proof tested and o e t d Wire Rope (entry hole) safe o n Gripple Hangers are an alternative self lockingl l to threaded rod and chain and no a t 6 s additional connectors, bearers or x in Setting Key (entry hole) faster to brackets are required Locking Wedges Standard finish galvanised, stainless steel available on request. Setting Key

STUD-END APPLICATION LOOP-END APPLICATION STANDARD ACCESSORIES

Small 2mm Dia. / SWL 10-45kg Anchor Adaptor No.2 M6 & M8

3mm Dia. / SWL 45-90kg (Can also be used with No.3 certain Cab-Clips) Wire End Tidy Clip 5mm Dia. / SWL 90-225kg

No.4 Never exceed 60°!

6mm Dia. / SWL 225-325kg

No.5 Pre-packed Kits Ÿ Order kits containing specified Gripple number, wire cut to length, setting key and wire end tidy clip 60° Max 60° Max Ÿ Ready made lengths from 1m to 10m come as standard Ÿ SWL (Safe Working Load) Safety Factor: 5 100m coils available SWL is reduced by 50% at 60°

No. 2 Gripple Hanger - Loop End No. 2 Gripple Hanger - M6 Stud End

REF A B Ø REF A B Ø M8 ON REQUEST ONLY S S (m) (mm) Kg SWL Safety Factor:5 (m) (mm) Kg SWL Safety Factor:5

LE2001 1.0 2.0 10-45 SE2001 1.0 2.0 10-45 LE2002 2.0 2.0 10-45 SE2002 2.0 2.0 10-45 LE2003 3.0 2.0 10-45 SE2003 3.0 2.0 10-45 LE2004 4.0 2.0 10-45 SE2004 4.0 2.0 10-45 LE2005 5.0 2.0 10-45 SE2005 5.0 2.0 10-45 LE2006 6.0 2.0 10-45 SE2006 6.0 2.0 10-45 LE2007 7.0 2.0 10-45 SE2007 7.0 2.0 10-45 LE2008 8.0 2.0 10-45 SE2008 8.0 2.0 10-45 LE2009 9.0 2.0 10-45 A SE2009 9.0 2.0 10-45 A LE2010 10.0 2.0 10-45 SE2010 10.0 2.0 10-45

B B 33 GRIPPLE HANGERS www.gripple.com The Revolutionary Wire Hanger System No. 3 Gripple Hanger - Loop End No. 3 Gripple Hanger - M6 Stud End M8 ON REQUEST ONLY REF A B Ø S (m) (mm) Kg SWL Safety Factor:5 REF A B Ø S (m) (mm) Kg SWL Safety Factor:5 LE3001 1.0 3.0 45-90 LE3002 2.0 3.0 45-90 SE3001 1.0 3.0 45-90 LE3003 3.0 3.0 45-90 SE3002 2.0 3.0 45-90 LE3004 4.0 3.0 45-90 SE3003 3.0 3.0 45-90 LE3005 5.0 3.0 45-90 SE3004 4.0 3.0 45-90 LE3006 6.0 3.0 45-90 SE3005 5.0 3.0 45-90 LE3007 7.0 3.0 45-90 SE3006 6.0 3.0 45-90 LE3008 8.0 3.0 45-90 SE3007 7.0 3.0 45-90 LE3009 9.0 3.0 45-90 SE3008 8.0 3.0 45-90 LE3010 10.0 3.0 45-90 A SE3009 9.0 3.0 45-90 A SE3010 10.0 3.0 45-90

B B

No. 4 Gripple Hanger - Loop End No. 5 Gripple Hanger - Loop End

REF A B Ø REF A B Ø S S (m) (mm) Kg SWL Safety Factor:5 (m) (mm) Kg SWL Safety Factor:5

LE4001 1.0 5.0 90-225 LE5001 1.0 6.0 225-325 LE4002 2.0 5.0 90-225 LE5002 2.0 6.0 225-325 LE4003 3.0 5.0 90-225 LE5003 3.0 6.0 225-325 LE4004 4.0 5.0 90-225 LE5004 4.0 6.0 225-325 LE4005 5.0 5.0 90-225 LE5005 5.0 6.0 225-325 LE4006 6.0 5.0 90-225 LE5006 6.0 6.0 225-325 LE4007 7.0 5.0 90-225 LE5007 7.0 6.0 225-325 LE4008 8.0 5.0 90-225 LE5008 8.0 6.0 225-325 LE4009 9.0 5.0 90-225 LE5009 9.0 6.0 225-325 LE4010 10.0 5.0 90-225 LE5010 10.0 6.0 225-325 A A

B B

Gripple “Y” System A simple, effective system to support both sides of duct or tray utilising just one Gripple hanger.

REF A B Width S (m) (mm) Kg SWL Safety Factor:5

i0005793 3.0 50-300 90-225 0005794i 3.0 300-1000 90-225

B

A 34

FASTENERS & ANCHORS

Cab-Strut Nuts Hex Nuts Grade 8 DIN934 Nylock Nuts Description Size Finish Diameter Diameter M4 Long Spring M6, M8, M10, M12 EG, SS316 M6 M5 Short Spring M6, M8, M10, M12 EG, SS316 M8 M6 No Spring M6, M8, M10, M12 EG M10 M8 M12 For technical Information see page 23 M10 M12 Finish: EG, SG, SS304, SS316, BR Finish: EG, SS304

Cab-Strut Stud Nuts Coupling Nuts Size Diameter M10 x 85 M6 x 25mm M10 x 95 M8 x 30mm M10 x 115 M10 x 35mm M10 x 120 M12 x 40mm M10 x 135

Finish: EG Finish: EG

Hex Set Screw GRADE 4, 6 DIN558

Diameter M6, M8, M10, M12 Spring nut is inserted A 90 degree turn positions Length (mm) 12, 16, 20, 25, 30, 35, 40, 45, 50, 60 anywhere along continuous the serrated grooves in the Finish EG, SG, SS304, SS316 slot. Rounded nut ends nut with the clamping permit easy insertion. ridges of the channel.

Gutter Bolts & Nuts Cup Square Bolts, Diameter Length Nuts & Washer M6 12mm Diameter M6 16mm M6 x 16mm M6 20mm Tightening by a wrench, locks 3,2mm Shank M6 25mm The fitting makes the the serrated teeth of the nut M8 x 16mm connection between any into the clamping ridge of the M6 30mm 3,2mm Shank framing channels or as channel to make the strong, means for other attachments. vice-like connection. Finish: EG Finish: SG, SS316

Cone Point Screws Mushroom Head Fully Threaded Rod Diameter Length Finish Diameter Screws & Nuts DIN975 M6 1m 3m, EG,, SG SS304 M10 x 45mm Diameter M8 ,1m3m EG,, SG SS304 M12 x 45mm M10 x 20mm M10 ,1m3m EG,, SG SS304 M12 ,1m3m EG,, SG SS304

Finish: EG, SS316 Finish: SG 35

FASTENERS & ANCHORS

Knurled Smooth Yellow Pass. EG 37 CABCLIPS - Technical & Commercial

Material ! All loads are for clips used on standard construction ! Spring Steel conforming to BS EN 1449 Past 1.15 Grade steelwork. Not recommended for use on stainless steel CS 70 or aluminium support structures ! Austempered and hardened to HRC 38.52 ! S Kg Static loads safety factor 3 to 1 Quality Assurance ! Generally in accordance with BS EN 9001 ! ! U Every batch comprehensively inspected and tested to Kg Ultimate loads maximum safe usable destruction ! Similar testing on product from alternative Q.A. Corrosive Protection approved sources ! Unless otherwise indicated spring steel fasteners are finished SG specifications Loading ! SG - Zinc Plated 12 to 15 micron for enhanced corrosion ! Loads indicated are in kilograms for stationary vertical protection (600 HR+) loads as indicated

FLANGE FIXINGS

Beam Clip Vertical Flange Clip Universal Beam Clip Beam Clip available in sizes to suit horizontal flanges Hammer on clip for vertical flanges from 1,5-7mm Universal Beam Clip available in sizes to suit from 1.5-20mm thick. 6.5mm hole receives hook, thick. 6.5 hole receives hook, chain or nut and bolt horizontal flanges from 3-20mm thick. Suitable for chain or nut and bolt connection. connection. horizontal and vertical screw/bolt connection.

REF T A B Ø S REF T A B C Ø REF T A B C Ø (mm) (mm) (mm) Kg S Kg S (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Kg BC153 1.5-3 16 6.5 72 VF155 1.5-5 53 19 6.5 72 BC38 3-8 18 6.5 90 UBC38 3-8 36 M6 45 VF57 5-7 53 19 6.5 72 BC814 8-14 26 6.5 90 UBC38S 3-8 36 M6x12 M6 45 UBC814 8-14 36 M6 45 BC1420 14-20 30 6.5 90 B T UBC814S 8-14 36 M6x12 M6 45 UBC1420 14-20 36 M6 45 UBC1420S 14-20 36 M6x12 M6 45 A T

C A B UBC

Large Beam Clip Master Clamp A Large Beam Clip to suit horizontal flanges from 23- Screw clamp for horizontal flanges from 2-18mm thick. 30mm. Simple solution for fixing to outsized steel. Suitable for horizontal and vertical screw/bolt C connection. REF T A B Ø U REF T A B Ø C Ø D Ø E Ø F Ø G Ø T (mm) (mm) (mm) Kg S (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Kg LBC2330 23-30 25 6.5 20 SC65 2-18 34 M6 6.5 M6 6.5 M4 10.7 45 SC107 2-18 34 M6 10.7 M6 6.5 M4 10.7 45 B

B B C UBCS A

T A D

E F T Ø

G THREADED ROD FIXINGS 38

Threaded Rod Hanger Large Beam Clip/Threaded Right Angled Bracket/ Threaded Rod Hanger for fixing to vertical faces. Rod Hanger Combination Threaded Rod Hanger Suits threaded rod M6, M8, M10 and M12. RH127 A simple cost-effective solution for fixing onto outsized Combination requires nut to secure. steelwork Grips firmly onto flanges up to 30mm. Suits Right Angle Bracket for soffit fixing. Incorporates threaded rod M6, M8, M10 and M12. RH127 requires REF A B Ø C Ø Threaded Rod Hanger to suit rod diameters M6, M8, S nut to secure. (mm) (mm) (mm) Kg M10 and M12. RH127 requires nut to secure. REF A T B Ø RH6T 28 6.5 M6 68 U (mm) (mm) (mm) Kg REF A B Ø C Ø RH8T 28 6.5 M8 68 S (mm) (mm) (mm) Kg RH10T 28 6.5 M10 68 RH127 28 6.5 12.7 68 LBC2330-RH6T 25 23-30 M6 20 LBC2330-RH8T 25 23-30 M8 20 RAB26-RH6T 47 M6 6.5 68 LBC2330-RH10T 25 23-30 M10 20 RAB26-RH8T 47 M8 6.5 68 LBC2330-RH127 25 23-30 12.7 20 RAB26-RH10T 47 M10 6.5 68 RAB26-RH127 47 12.7 6.5 68 RAB44-RH6T 65 M6 6.5 68 RAB44-RH8T 65 M8 6.5 68 RAB44-RH10T 65 M10 6.5 68 A B RAB44-RH127 65 12.7 6.5 68

C

A A T

B C B B

Beam Clip/Threaded Rod Vertical Flange Clip/ Height Adjustable Threaded Hanger Combination Threaded Rod Hanger Rod Hanger Beam Clip to suit horizontal flanges 1,5-20mm thick. Combination Height Adjustable Threaded Rod Hanger Clip for fixing Incorporating Threaded Rod Hanger for rod diameters to vertical faces. Clip flexes to allow rapid adjustment Hammer-on Vertical Flange Clip to suit flange M6, M8, M10 and M12. RH127 requires nut to secure. of threaded rod. Suits threaded rod diameter M6, M8 thickness 1.5-7mm. Incorporates Threaded Rod & M10. Hanger for rod diameters M6, M8, M10 and M12. RH127 requires nut to secure. REF T A B Ø REF A S B Ø C Ø S (mm) (mm) (mm) Kg (mm) (mm) (mm) Kg REF T A B Ø S BC153-RH6T 1.5-3 44 M6 68 (mm) (mm) (mm) Kg TRH6 55 6.5 M6 60 BC153-RH8T 1.5-3 44 M8 68 TRH8 55 6.5 M8 70 BC153-RH10T 1.5-3 44 M10 68 VF155-RH6T 1.5-5 70 M6 68 TRH10 55 6.5 M10 70 BC153-RH127 1.5-3 44 12.7 68 VF155-RH8T 1.5-5 70 M8 68 VF155-RH10T 1.5-5 70 M10 68 B VF155-RH127 1.5-5 70 12.7 68 3-8 46 M6 68 BC38-RH6T VF57-RH6T 5-7 70 M6 68 BC38-RH8T 3-8 46 M8 68 VF57-RH8T 5-7 70 M8 68 BC38-RH10T 3-8 46 M10 68 VF57-RH10T 5-7 70 M10 68 A BC38-RH127 3-8 46 12.7 68 VF57-RH127 5-7 70 12.7 68 T C BC814-RH6T 8-14 54 M6 68 BC814-RH8T 8-14 54 M8 68 BC814-RH10T 8-14 54 M10 68 BC814-RH127 8-14 54 12.7 68 A Vertical Flange Clip/Height

BC1420-RH6T 14-20 60 M6 68 Adjustable Threaded Rod 14-20 60 M8 68 Hanger Combination BC1420-RH8T B 14-20 60 M10 68 BC1420-RH10T Vertical Flange Clip to suit flanges 1.5-7mm thick, BC1420-RH127 14-20 60 12.7 68 incorporating Height Adjustable Threaded Rod Master Clamp/Threaded Hanger for threaded rod diameters M6, M8 & M10. Rod Hanger Combination Threaded rods adjusted by flexing clip with finger. Screw Clamp for horizontal flanges up to 18mm. Incorporates Threaded Rod Hanger to suit rod REF T A Ø S diameters M6, M8, M10 and M12. RH127 requires (mm) (mm) Kg nut to secure. VF155-TRH6 1.5-5 M6 60 REF T A Ø VF155-TRH8 1.5-5 M8 70 T S (mm) (mm) Kg VF155-TRH10 1.5-5 M10 70 VF57-TRH6 5-7 M6 60 SC107-RH6T Max 18 M6 45 VF57-TRH8 5-7 M8 70 A SC107-RH8T Max 18 M8 45 VF57-TRH10 5-7 M10 70 SC107-RH10T Max 18 M10 45 SC107-RH127 Max 18 12.7 45 T B

T

A 39 THREADED ROD FIXINGS

Master Clamp/Height Height Adjustable Beam Clip/Height Adjustable Threaded Rod Threaded Rod Hanger Adjustable Threaded Rod Hanger Combination Combination Hanger Combination Screw Clamp for horizontal flanges up to 18mm. Double Clip for fixing threaded rod to threaded rod, Beam Clip for horizontal flange fixing, incorporating Incorporates Adjustable Threaded Rod Hanger to suit diameters M6, M8 & M10 in various combinations Height Adjustable Threaded Rod Hanger to suit rod diameters M6, M8 & M10. (see tabulated information) Height adjustable by threaded rod diameter M6, M8 & M10. Beam Clips flexing clip with finger. suit flange thickness 2-20mm

REF T A Ø S REF A Ø B Ø S REF T A Ø Kg Kg S (mm) (mm) (mm) (mm) (mm) (mm) Kg

SC107-TRH6 Max 18 M6 25 TRH6-TRH6 M6 M6 60 BC153-TRH6 1.5-3 M6 60 SC107-TRH8 Max 18 M8 25 TRH6-TRH8 M6 M8 60 BC153-TRH8 1.5-3 M8 70 SC107-TRH10 Max 18 M10 25 TRH6-TRH10 M6 M10 60 BC153-TRH10 1.5-3 M10 70 TRH8-TRH8 M8 M8 70 TRH8-TRH10 M8 M10 70 BC38-TRH6 3-8 M6 60 TRH10-TRH10 M10 M10 70 BC38-TRH8 3-8 M8 70 BC38-TRH10 3-8 M10 70

BC814-TRH6 8-14 M6 60 BC814-TRH8 8-14 M8 70 BC814-TRH10 8-14 M10 70 T A BC1420-TRH6 14-20 M6 60 BC1420-TRH8 14-20 M8 70 BC1420-TRH10 14-20 M10 70

A B

T

A

CABLE & TUBE FIXINGS

Cable Run Clip Support Clip Snap-In Conduit Clip Simple clip available in sizes to suit horizontal or vertical Spring clip for horizontal and vertical flanges or For fixing to vertical or horizontal surfaces. Conduit flanges from 2-12mm thick. Suitable for round conduit or threaded drop rods. Designed to support conduit 16- snaps securely into position. Designed to support cable. 40mm diameter. No tools required. conduit 18-33mm diameter. REF T (mm) A Ø (mm) REF A B Ø REF A B Ø C Ø CRS4555 2-4 4.5-5.5 S U (mm) (mm) Kg (mm) (mm) (mm) Kg CRS67 2-4 6-7 CRS89 2-4 8-9 (For flanges) SICC1825 38 18-25 6.5 11 CRS1011 2-4 10-11 SC313T 3-5 16-25 45 SICC2229 38 22-29 6.5 11 CRS1214 2-4 12-14 CRS1519 2-4 15-19 6-9 16-20 45 SICC2933 43 29-33 6.5 11 CRS2024 2-4 20-24 9-13 16 45 CRS2532 2-4 25-32 SC320T 3-5 20-38 45 CRM4555 4-7 4.5-5.5 6-9 20-35 45 CRM67 4-7 6-7 9-13 20-30 45 CRM89 4-7 8-9 13-16 20-25 45 4-7 10-11 CRM1011 16-20 20 45 CRM1214 4-7 12-14 CRM1519 4-7 15-19 (For rod) 4-7 20-24 CRM2024 SC313T M6/M8/M10 20 Max 22 C CRM2532 4-7 25-32 SC320T M6/M8/M10 40 Max 22 CRL4555 8-12 4.5-5.5 B 8-12 6-7 CRL67 A CRL89 8-12 8-9 CRL1011 8-12 10-11 CRL1214 8-12 12-14 A CRL1519 8-12 15-19 CRL2024 8-12 20-24 CRL2532 8-12 25-32 B

A

A

T B CABLE & TUBE FIXINGS 40

Locking Conduit Clip Double Run Locking Beam Clip/Locking Conduit For fixing to vertical or horizontal surfaces. Conduit Mount Clip Combination Conduit/cable is held securely in position by locking Double Locking Conduit Clip to support multi- mechanism. Use pliers to secure. Designed to Beam Clip with Locking Conduit Clip for fixing to directional conduit. Use pliers to lock. Designed to support conduit/cable 12-57mm diameter. horizontal or vertical flanges. Conduit is held adjacent support conduit 12-57mm diameter. to face of flange. Designed to support conduit/cables REF A B Ø C Ø 12-57mm diameters. S REF A Ø B Ø (mm) (mm) (mm) Kg U (mm) (mm) Kg REF T A Ø U LCC1219 44 12-19 6.5 45 (mm) (mm) Kg LCC1926 44 19-26 6.5 45 LCC1219-LCC1219 12-19 12-19 45 BC153-LCC1219 1.5-3 12-19 12 LCC2632 55 26-32 6.5 45 LCC1219-LCC1926 12-19 19-26 45 BC153-LCC1926 1.5-3 19-26 12 LCC3240 68 32-40 6.5 45 LCC1219-LCC2632 12-19 26-32 45 BC153-LCC2632 1.5-3 26-32 12 LCC4047 79 40-47 6.5 45 LCC1219-LCC3240 12-19 32-40 45 BC153-LCC3240 1.5-3 32-40 12 LCC4757 87 47-57 6.5 45 LCC1219-LCC4047 12-19 40-47 45 BC153-LCC4047 1.5-3 40-47 12 LCC1219-LCC4757 12-19 47-57 45 BC153-LCC4757 1.5-3 47-57 12 LCC1926-LCC1926 19-26 19-26 45 LCC1926-LCC2632 19-26 26-32 45 BC38-LCC1219 3-8 12-19 12 C LCC1926-LCC3240 19-26 32-40 45 BC38-LCC1926 3-8 19-26 12 LCC1926-LCC4047 19-26 40-47 45 BC38-LCC2632 3-8 26-32 12 LCC1926-LCC4757 19-26 47-57 45 BC38-LCC3240 3-8 32-40 12 LCC2632-LCC2632 26-32 26-32 45 BC38-LCC4047 3-8 40-47 12 LCC2632-LCC3240 26-32 32-40 45 BC38-LCC4757 3-8 47-57 12 B LCC2632-LCC4047 26-32 40-47 45 A LCC2632-LCC4757 26-32 47-57 45 BC814-LCC1219 8-14 12-19 12 8-14 19-26 12 LCC3240-LCC3240 32-40 32-40 45 BC814-LCC1926 BC814-LCC2632 8-14 26-32 12 LCC3240-LCC4047 32-40 40-47 45 BC814-LCC3240 8-14 32-40 12 LCC3240-LCC4757 32-40 47-57 45 BC814-LCC4047 8-14 40-47 12 Double Run Snap-In LCC4047-LCC4047 40-47 40-47 45 BC814-LCC4757 8-14 47-57 12 Conduit Mount LCC4047-LCC4757 40-47 47-57 45 LCC4757-LCC4757 47-57 47-57 45 14-20 12-19 12 Double Snap-in Conduit Clips to support multi- BC1420-LCC1219 BC1420-LCC1926 14-20 19-26 12 directional conduit. Supports conduit 18-33mm A diameter. No tools required. BC1420-LCC2632 14-20 26-32 12 BC1420-LCC3240 14-20 32-40 12 REF A Ø B Ø BC1420-LCC4047 14-20 40-47 12 U (mm) (mm) Kg BC1420-LCC4757 14-20 47-57 12

SICC1825-SICC1825 18-25 18-25 11 SICC1825-SICC2229 18-25 22-29 11 T SICC1825-SICC2933 18-25 29-33 11 B SICC2229-SICC2229 22-29 22-29 11 SICC2229-SICC2933 22-29 29-33 11 SICC2933-SICC2933 29-33 29-33 11 A Beam Clip/Snap-In Conduit A Combination - Reversed B Beam Clip with Snap-In Conduit Clip for fixing to horizontal or vertical flanges. Designed to support Universal Beam Clip/Snap-In conduit 18-33mm diameter. Conduit Clip Combination

REF T A Ø Universal Beam Clip with Snap-in Conduit Clip for U fixing to horizontal or vertical flanges. Designed to (mm) (mm) Kg Beam Clip/Snap-in Conduit support conduit 18-33mm. Clip Combination BC38-SICC1825R 3-8 18-25 7 BC38-SICC2229R 3-8 22-29 7 REF T A Ø U Beam Clip with Snap-In Conduit Clip for fixing to BC814-SICC1825R 8-14 18-25 7 (mm) (mm) Kg horizontal or vertical flanges. Designed to support BC814-SICC2229R 8-14 22-29 7 conduit 18-33mm diameter BC814-SICC2933R 8-14 29-33 7 UBC38-SICC1825 3-8 18-25 11 UBC38-SICC2229 3-8 22-29 11 REF T A Ø BC1420-SICC1825R 14-20 18-25 7 U BC1420-SICC2229R 14-20 22-29 7 UBC38-SICC2933 3-8 29-33 11 (mm) (mm) Kg BC1420-SICC2933R 14-20 29-33 7 UBC814-SICC1825 8-14 18-25 11 BC38-SICC1825 3-8 18-25 7 UBC814-SICC2229 8-14 22-29 11 BC38-SICC2229 3-8 22-29 7 UBC814-SICC2933 8-14 29-33 11 BC38-SICC2933 3-8 29-33 7 UBC1420-SICC1825 14-20 18-25 11 A BC814-SICC1825 8-14 18-25 7 UBC1420-SICC2229 14-20 22-29 11 BC814-SICC2229 8-14 22-29 7 UBC1420-SICC2933 14-20 29-33 11 BC814-SICC2933 8-14 29-33 7 BC1420-SICC1825 14-20 18-25 7 BC1420-SICC2229 14-20 22-29 7 BC1420-SICC2933 14-20 29-33 7

T T

T A

A 41 CABLE & TUBE FIXINGS

Universal Beam Clip/Side Large Beam Clip/Locking Master Clamp/Locking Mounted Snap-In Conduit Conduit Clip Combination Conduit Clip Combination Clip Combination Large Beam Clip to suit horizontal flanges from 23- Screw Clamp incorporatingLocking Conduit Clip 30mm thick with Locking Conduit Clip. Designed to for horizontal flanges up to 18mm thick. Holds Universal Beam Clip with side mounted Snap-In support conduit 12-57mm diameter. Use pliers to conduit or pipe adjacent to face of flange. Suits Conduit Clip for fixing to horizontal or vertical flanges. lock. conduit or pipe12-57 mm diameter. Use pliers to Conduit is held away from the edge of flange. lock. Conduit Clip swivels 360°. Designed to support conduit 18-33mm diameter. REF T A Ø U REF T A Ø (mm) (mm) Kg U REF T A Ø (mm) (mm) Kg U (mm) (mm) Kg LBC2330-LCC1219 23-30 12-19 10 SC65-LCC1219 18 Max 12-19 45 LBC2330-LCC1926 23-30 19-26 10 SC65-LCC1926 18 Max 19-26 45 UBC38-SICC1825SM 3-8 18-25 11 LBC2330-LCC2632 23-30 26-32 10 SC65-LCC2632 18 Max 45 UBC38-SICC2229SM 3-8 22-29 11 26-32 LBC2330-LCC3240 23-30 32-40 10 SC65-LCC3240 UBC38-SICC2933SM 3-8 29-33 11 18 Max 32-40 45 LBC2330-LCC4047 23-30 40-47 10 SC65-LCC4047 UBC814-SICC1825SM 814 18-25 11 18 Max 40-47 45 LBC2330-LCC4757 23-30 47-45 10 SC65-LCC4757 UBC814-SICC2229SM 814 22-29 11 18 Max 47-57 45 UBC814-SICC2933SM 814 29-33 11 UBC1420-SICC1825SM 14-20 18-25 11 UBC1420-SICC2229SM 14-20 22-29 11 UBC1420-SICC2933SM 14-20 29-33 11 A T A A T

Master Clamp/Snap-In Conduit Master Clamp/Side T Clip Combination Mounted Locking Conduit Screw Clamp incorporating Snap-in Conduit Clip for Clip Combination horizontal flanges up to 18mm thick. Holds conduit or Screw Clamp incorporating side mounted Locking pipe adjacent to face of flange. Suits conduit or pipe Conduit Clip for horizontal flanges up to 18mm thick. Universal Beam Clip/ 18-33mm diameter. Conduit Clip swivels 360°. Holdscable, conduit or pipe adjacent to edge of Locking Conduit Clip flange. Suits conduit or pipe12-57 mm diameter. REF T A Ø Conduit Clip swivels 360°. Combination U (mm) (mm) Kg REF T A Ø Universal Beam Clip with Locking Conduit Clip for U (mm) (mm) Kg fixing to horizontal or vertical flanges. Conduit is held SC65-SICC1825 18 Max 18-25 11 adjacent to face of flange. Designed to support 18 Max 22-29 11 SC107-LCC1219 18 Max 12-19 12 conduit 12-57mm diameter. Use pliers to lock. SC65-SICC2229 SC65-SICC2933 18 Max 29-33 11 SC107-LCC1926 18 Max 19-26 12 SC107-LCC2632 18 Max 26-32 12 REF T A Ø U SC107-LCC3240 18 Max 32-40 12 (mm) (mm) Kg SC107-LCC4047 18 Max 40-47 12 SC107-LCC4757 UBC38-LCC1219 3-8 12-19 45 18 Max 47-57 12 UBC38-LCC1926 3-8 19-26 45 UBC38-LCC2632 3-8 26-32 45 T UBC38-LCC3240 3-8 32-40 25 UBC38-LCC4047 3-8 40-47 45 T UBC38-LCC4757 3-8 47-57 45 A UBC814-LCC1219 8-14 12-19 45 A UBC814-LCC1926 8-14 19-26 45 UBC814-LCC2632 8-14 26-32 45 UBC814-LCC3240 8-14 32-40 45 UBC814-LCC4047 8-14 40-47 45 Vertical Flange Clip/Snap-In UBC814-LCC4757 8-14 47-57 45 Master Clamp/Side Mounted Conduit Clip Combination UBC1420-LCC1219 14-20 12-19 25 Snap-In Conduit Clip Clips for vertical flanges from 1,5-7mm thick 14-20 45 UBC1420-LCC1926 19-26 Combination incorporating a Snap-In Conduit Clip for services 18- UBC1420-LCC2632 14-20 26-32 45 Screw Clamp incorporating Side Mounted Snap-in 33mm diameter. Holds services away from face of UBC1420-LCC3240 14-20 32-40 45 Conduit Clip for horizontal flanges up to 18mm thick. flange. UBC1420-LCC4047 14-20 40-47 45 Holds conduit or pipe adjacent toedge of flange. REF T A Ø UBC1420-LCC4757 14-20 47-57 45 Suits conduit or pipe18-33 mm diameter. Conduit Clip U swivels 360°. (mm) (mm) Kg REF T A Ø VF155-SICC1825 1.5-5 18-25 11 U (mm) (mm) Kg VF155-SICC2229 1.5-5 22-29 11 VF155-SICC2933 1.5-5 29-33 11 SC107-SICC1825 18 Max 18-25 7 VF57-SICC1825 5-7 18-25 11 SC107-SICC2229 18 Max 22-29 7 VF57-SICC2229 5-7 22-29 11 SC107-SICC2933 18 Max 29-33 7 VF57-SICC2933 5-7 29-33 11

T T

A

T

A A CABLE & TUBE FIXINGS 42

Vertical Flange Clip/Locking Vertical Flange Clip/Locking Vertical Flange Clip/Snap-In Conduit Clip Combination Conduit Clip Combination Conduit Clip Combination Clips for vertical flanges from 1,5-7mm thick Reversed Reversed incorporating a Locking Conduit Clip for services Clips for vertical flanges from 1,5-7mm thick Clips for vertical flanges from 1,5-7mm thick 12-57mm diameter. Holds services away from face incorporating areversed Locking Conduit Clip for incorporating areversed Snap-in Conduit Clip for of flange. services 12-32 mm diameter. Holds services beneath services18-33 mm diameter. Holds services beneath flange, recessed back from face. flange, recessed back from face. REF T A Ø U (mm) (mm) Kg REF T A B Ø T A U REF B Ø U (mm) (mm) (mm) Kg (mm) (mm) (mm) Kg VF155-LCC1219 1.5-5 12-19 25 1.5-5 MAX20 VF155-LCC1926 1.5-5 19-26 25 VF155-LCC1219R 12-19 12 VF155-SICC1825R 1.5-5 MAX20 18-25 11 1.5-5 MAX20 19-26 VF155-LCC2632 1.5-5 26-32 25 VF155-LCC1926R 12 VF155-SICC2229R 1.5-5 MAX20 22-29 11 1.5-5 MAX20 26-32 12 VF155-LCC3240 1.5-5 32-40 25 VF155-LCC2632R VF155-SICC2933R 1.5-5 MAX20 29-33 11 VF155-LCC4047 1.5-5 40-47 25 VF57-SICC1825R 5-7 MAX20 18-25 11 5-7 MAX20 12-19 12 VF155-LCC4757 1.5-5 47-57 25 VF57-LCC1219R VF57-SICC2229R 5-7 MAX20 22-29 11 5-7 MAX20 19-26 12 VF57-LCC1926R VF57-SICC2933R 5-7 MAX20 29-33 11 5-7 MAX20 26-32 12 VF57-LCC1219 5-7 12-19 25 VF57-LCC2632R T VF57-LCC1926 5-7 19-26 25 T VF57-LCC2632 5-7 26-32 25 A VF57-LCC3240 5-7 32-40 25 A VF57-LCC4047 5-7 40-47 25 A VF57-LCC4757 5-7 47-57 25 A

B B T

Girder Clips for Multi Cables Girder Clip to suit horizontal flange from 3-18mm, allows for cable tie attachment. C A REF T (mm) A (mm) B (mm) C (mm) T

GC310 3-10 52 16 10 A GC1018 10-18 52 16 10 B

Z-PURLIN HANGERS (45°)

Z-Purlin Flange Clip (45°) Z-Purlin Flange Clip (45°)/ Z-Purlin Hanger (45°)/ Hammer-on clip for supporting chains etc. to 45° Threaded Rod Hanger Locking Conduit Clip angled steelwork 1.5-5mm. 4.5mm hole receives hook, chain or nut and bolt connection. Combination Combination Hammer-on 45° Z-Purlin Flange Clip to suit flange Z-Purlin Hanger incorporating a Locking Conduit REF T A B C D Ø thickness 1.5-5mm. Incorporates Threaded Rod Clip. Suits conduit and cable diameters 12-57mm. S Hanger for rod diameters M6, M8, M10 and M12. Conduit clip turns 360°. (mm) (mm) (mm) (mm) (mm) Kg RH127 requires nut to secure. ZPFC155 1.5-5 15 53 15 6.5 45 T T A B D Ø REF A B Ø 45o A S S (mm) (mm) (mm) C° (mm) Kg (mm) (mm) Kg

ZPFC155-RH6T 1.5-5 15 77 45° M6 45 ZPH2-LCC1219 Max 3 12-19 45 B ZPFC155-RH8T 1.5-5 15 77 45° M8 45 ZPH2-LCC1926 Max 3 19-26 45 ZPFC155-RH10T 1.5-5 15 77 45° M10 45 ZPH2-LCC2632 Max 3 26-32 45 ZPFC155-RH127 1.5-5 15 77 45° 12.7 45 ZPH2-LCC3240 Max 3 32-40 45 D ZPH2-LCC4047 Max 3 40-47 45 45o C ZPH2-LCC4757 Max 3 47-57 45

45o

Z-Purlin Hanger (45°) A T Z-Purlin Hangers for supporting conduit junction boxes, C° chains etc. to 45° angled steelwork up to 3mm thick. REF A B C Ø S A (mm) (mm) (mm) Kg B

ZPH1 Max 3 64 6.5 45 ZPH2 Max 3 50 6.5 45 45o

A D A B B B

C C ZPH1 ZPH2 43 Z-PURLIN HANGERS

Z-Purlin Hanger (45°) / Snap-In Z-Purlin Hanger (45°) / Cable Z-Purlin Hanger (45°)/ Conduit Clip Combination (45°) Tie Saddle Combination Threaded Rod Hanger Z-Purlin Hanger incorporating a Snap-In Conduit Clip. Z-Purlin Hanger incorporating Cable Tie Saddle. Combination Suits conduit diameter 18-33mm. Conduit clip turns Z-Purlin Hanger incorporating Threaded Rod Hanger 360°. to suit rod diameter M6, M8, M10 & M12. REF A B Ø U REF A U (mm) (mm) Kg (mm) Kg REF A B Ø S (mm) (mm) Kg ZPH2-SICC1825 Max 3 18-22 11 ZPH2-CTS Max 3 22 ZPH2-SICC2229 Max 3 22-29 11 ZPH1-RH6T Max 3 M6 45 o ZPH2-SICC2933 Max 3 29-33 11 45 ZPH1-RH8T Max 3 M8 45

o ZPH1-RH10T Max 3 M10 45 45 A ZPH1-RH127 Max 3 12.7 45 A 45o

A

B

Z-Purlin Hanger (45°) / Height Adjustable Rod Hanger

Combination B

Z Purlin Hanger incorporating a Height Adjustable Threaded A Rod Hanger to suit threaded Rod diameters M6, M8 & M10.

B Ø 45o REF A S (mm) (mm) Kg

ZPH1-TRH6 Max 3 M6 45 ZPH1-TRH8 Max 3 M8 45 B ZPH1-TRH10 Max 3 M10 45

CABLE TIE FIXINGS

Vertical Flange Clip/Cable Cable Tie Saddle Beam Clip/Cable Tie Tie Saddle Combination Loose Cable Tie Saddle for use as a mounting base Saddle Combination for cable ties. Clips for vertical flanges 1.5-7mm thick incorporating Beam Clip to suit horizontal flange from 1.5-20mm Cable Tie Saddle for cable tie attachment REF A (mm) B (mm) C Ø (mm) with Cable Tie Saddle for cable tie attachment REF T A B CTS 9 3.5 6.5 U Kg REF T A B (mm) (mm) (mm) U (mm) (mm) (mm) Kg VF155-CTS 1.5-5 9 3.5 22 BC153-CTS 1.5-3 9 3.5 22 VF155-CTSR 1.5-5 9 3.5 22 A BC38-CTS 3-8 9 3.5 22 VF57-CTS 5-7 9 3.5 22 B VF57-CTSR 5-7 9 3.5 22 BC814-CTS 8-4 9 3.5 22 BC1420-CTS 14-20 9 3.5 22 C

T

T Large Beam Clip/Cable Tie Saddle Combination A simple cost-effective solution for fixing onto outsized steelwork. Grips firmly onto flanges up to 30mm incorporating Cable Tie Saddle for cable tie attachment.

B T (mm) A (mm) B (mm) U A REF Kg

B A LBC2330-CTS 23-30 9 3.5 20

(Reversed Option)

T B

A STRAP HANGERS 44

Strap Hanger Vertical Flange Clip/Strap Right Angle Bracket/Strap Strap Hanger with 6.5mm diameter hole for fixing to Hanger Combination Hanger Combination vertical surfaces. Suitable for straps up to 28mm wide. Strap Hanger Clip for fixing onto vertical flanges Angle bracket for soffit fixing, incorporating strap REF A B C D Ø 1.5-7mm thick. Suits strap width up to 28mm, hanger to suit strap width up to 28mm. Two S running parallel to edge of flange. versions available. (mm) (mm) (mm) (mm) Kg

SH 28 6.3 18 6.5 90 REF T A B C REF A B C D Ø S SHR 28 6.3 34 6.5 90 S Kg (mm) (mm) (mm) (mm) Kg (mm) (mm) (mm) (mm) D VF155-SH 1.5-5 28 6.3 62 72 RAB26-SH 28 6.3 38 6.5 90 VF57-SH 5-7 28 6.3 62 72 RAB44-SH 28 6.3 54 6.5 90 RAB26-SHR 28 6.3 54 6.5 90 D RAB44-SHR 28 6.3 72 6.5 90 C SHR SH T D C

B C

B

C A A D

B C A Beam Clip/Strap Hanger B B Combination A Strap Hanger for fixing to horizontal flanges 1.5-20mm A thick. Suits strap width up to 28mm, running parallel to edge of flange. Vertical Flange/Right Angle Strap Hanger Combination REF T A B C Right Angle Strap Hanger for fixing onto vertical S (mm) (mm) (mm) (mm) Kg flanges 1-7mm thick. Suits strap width up to 28mm, running at right angle to edge of flange. Z-Purlin Hanger 45° / Strap BC153-SH 1.5-3 28 6.3 36 72 Hanger Combination 3-8 28 6.3 38 REF T A B C BC38-SH 90 S BC814-SH 8-14 28 6.3 46 90 (mm) (mm) (mm) (mm) Kg Z-Purlin Hanger incorporating Strap Hanger Support for strap up to 25mm wide. BC1420-SH 14-20 28 6.3 58 90 VF155-SHR 1.5-5 28 6.3 77 72 VF57-SHR 5-7 28 6.3 77 72 REF A B C D S (mm) (mm) (mm) (mm) Kg

ZPH1-SH Max 3 88 28 6.3 45 C ZPH1-SHR Max 3 115 28 6.3 45 T 45o

A B

ZPH1-SHR Beam Clip/Right Angle Strap

Hanger Combination D Right Angle Strap Hanger for fixing to horizontal T flanges 1.5-20mm thick. Suits strap width up to 28mm, running at right angle to edge of flange. C REF T A B C S A (mm) (mm) (mm) (mm) Kg C BC153-SHR 1.5-3 28 6.3 58 72 B BC38-SHR 3-8 28 6.3 60 90 ZPH1-SH BC814-SHR 8-14 28 6.3 68 90 BC1420-SHR 14-20 28 6.3 80 90 B D

A

C

T C

B

A 45 CLAMPS/MISCELLANEOUS

Ceiling Clip / Spin Nut Heavy Duty Swivel Hanger

XC25-16S Ceiling Clip is a special centre rotating clamp on clip for Offers high load bearing capacity whilst removing the need to bend ceiling “T” bars. Supplied with 16mm long M6 threaded stud as threaded rod. Accepts both M8 and M10 rods. standard. WN6 spin nuts supplied separately. REF T A B C D Ø E Ø Ref A B C Ø S S (mm) (mm) (mm) (mm) (mm) (mm) Kg (mm) (mm) Kg

XC25-16S 25 16 M6 22 HDSH Max 25 60 71 12 10 M8/M10 200* WN6 - - M6 *Note: Vertical Load

XC25-16S

WN6

B

A C 6 Nm S o Kg 180

Max 30o A

Right Angle Bracket D T C Basic bracket for horizontal soffit fixing. 6.5mm hole receives hook, chain or nut and bolt connection. B

REF A B C Ø D Ø S 70kg (mm) (mm) (mm) (mm) Kg D

RAB-26 26 26 6.5 4.6 90 RAB-44 44 28 6.5 - 90

Finish: EG

C B D

E

A D B 100kg S Kg

C RAB-26

C

A

RAB-44

C 250kg 200kg 46

CABLE TRAY- PERFORATED METAL

Use with Cab-Strut metal framing to provide multi-directional support for runs of cabling Standard finish (LCT) galvanised (PG) Standard finish (MCT & HCT) galvanised (HDG) Other materials & finishes on request HCT - 76mm deep (2 Slots) MCT - 38mm deep (1 slot) LIGHT DUTY CABLE TRAY (LCT) Width 50 76 101 152 203 228 305 Height 13 13 19 19 19 19 19 Material 0,8 0,8 1,0 1,0 1,0 1,0 1,0 Standard Length: 3000mm (2950 + 50mm Tongue) Slots: 25 x 7mm Pitch: 40 x 12,7mm Accessory Radius: 100mm

MEDIUM DUTY CABLE TRAY (MCT) Width 76 114 152 228 305 Height 38 38 38 38 38 Material 1,6 1,6 1,6 1,6 1,6 No Splices Required. Order M6 x 12mm Gutter Standard Length: 3000mm Bolts & Nuts Separately. Slots: 25 x 11mm Pitch: 38 x 25mm Accessory Radius: 450mm Order splices, screws and nuts separately. M10 x 20mm Mushroom Head Screws & Nuts (4/Splice) LCT For greater widths Heavy Duty Tray is recommended.

HEAVY DUTY CABLE TRAY (HCT) Width 76 114 152 228 305 457 610 Height 76 76 76 76 76 76 76 Material 1,6 1,6 1,6 1,6 1,6 2,0 2,0 Standard Length: 3000mm Slots: 25 x 11mm Pitch: 38 x 25mm Accessory Radius: 450mm Order splices, screws and nuts separately. M10 x 20mm Mushroom Head Screws & Nuts (4/Splice) Light Duty Cable Tray (LCT) Typical Cantilever Arm Installation Typical Trapeze Installation

Standard Accessories (For Covers see page 54-55)

Horizontal Tee 4 Way Bend 90° Crossover

External Elbow (Dropper)

Closed Cover (1,5m Long) Covers for standard Angle Splice Angle Splice accessories also available (Medium (Heavy ALL COVERS Duty) Duty) MADE TO ORDER

Centre Splice (457mm Wide Reversible & Upward Only) Reducing Splice

Internal Elbow (Riser) 47

RETURN FLANGE CABLE TRAY

Worldwide standard design Standard Length: 3000mm Slot Size (Longitudinal): 25 x 7,5mm Lighter, stronger and more cost (Lateral) 2mm 0 x 11 effective Fasteners: M6 x 16 Cup Reduced installation times and costs Sq. Screw, Nut Standard finish galvanised (PG) & Washer Other materials and finishes on request

RFMD RFHD Material Thicknesses MEDIUM DUTY HEAVY DUTY Width (mm) 50-225 300 450 600 750 900 Straight Tray 1,0 1,2 1,5 1,5 1,5 1,5 10 10 Standard Accessory 1,0 1,2 12, 1,2 1,5 1,5 11 11 50 27 Length 3000mm Length 3000mm RFMD/STR RFHD/STR Medium Duty Return Heavy Duty Return Flange Tray Flange Tray "Built-in" coupler (splice) 250 250 on all standard accessories reduces installation time. 600 200 200 300 600 150 150 300 Load kg/m Load kg/m 150 150 100 100

Standard Accessory Radii: Horizontal Bends, Tees and 4 50 50 Way Crossovers: 50 - 225mm wide = 125mm 300mm wide = 150mm SPAN SPAN 450 - 900mm wide = 200mm 1,0 1,5 2,0 1,0 1,5 2,0 Variable Risers: All widths = 240mm

Standard Accessories (For Covers see page 54-55)

Horizontal Bend 90° Variable Internal Tee 4 Way Crossover Riser & External Dropper from 0°-90°

Wrap Over Coupler (200mm) Fishplate Coupler Straight Horizontal Reversible and Vertical Reducing Couplers W 200 x 45mm 145mm Adjustable Coupler 200 x 20mm 135 Couplers (150, 300 & 450mm) Divider (Straight Wall Mounting Plate Closed Cover Tray) Tray W (1,5m Long) Dividers also Arm Covers for standard available for accessories also available Standard W ALL COVERS (up to 150mm) Accessories MADE TO ORDER

W Tray W Trapeze Open Standoff Hanger Hanger W Bracket 50 Bracket (up to 300mm) Bracket 48

CABLE TRAY- WELDED WIRE MESH

3000mm standard length Pitch 100 x 50mm & 50 x 50mm Standard finish - Hot Dip Galvanised (HDG) Hold down saddle & joiner clamp set galvanised (HDG) WWMD/WWHD Other materials and finishes on request ON SITE FABRICATION

On site fabrication is simple MEDIUM DUTY CABLE TRAY (WWMD) using bolt cutters. Trays can be cut to suit required radius. Width mm 50 100 150 200 300 400 500 600 Joiner Sets Req. 2 3 3 3 3 4 4 4 Height: 50mm Wire Ø: 4,0mm Sidewalls: 2 longitudinal wires at 25mm centres

HEAVY DUTY CABLE TRAY (WWHD) Width mm 100 150 200 300 400 500 600 800 1000 Joiner Sets Req. 3 3 3 3 4 4 4 5 5 Height: mm75 Sidewalls: 3 longitudinal wires at 25mm centres Wire Ø: ,0mm5

Accessory Radius: 450mm or 160mm (WW MD only) . Order joiner sets separately. WWMD WWHD Wire Mesh Tray Wire Mesh Tray CLIP-ON SUPPORT CHANNEL 150 400 Horizontal or vertical installation No saddles required

300 Bend over tabs to secure Load kg/m Load kg/m 1200mm standard length 50/600mm 300/1000mm Material Thickness: 1,6mm

75 200

100/200mm 100

SPAN SPAN 1,0 1,5 2,0 1,5 2,0 3,0

Standard Accessories - 50x50 Pitchmm(For Covers see page 54-55)

Horizontal Tee Bend 90° Unique Flush Hold Down Saddle 2 Part Joiner Clamp ()8,5mm Slot (includes integral nut & bolt)

(Saddle tongues locate below cross wires) Internal Elbow 4 Part Joiner (Riser) External Clamp Set Elbow (includes (Dropper) M6 x 16mm Screw 4 Way & Nut) Crossover 49

CL LADDER - CL55/76

Standard finish galvanised Standard Length: 3000mm (HDG) Rung Spacing: 375mm Slot Size :CL55 17 x 7mm Welded construction CL76: 25 x 7mm Special materials & coatings Cross Rung Thickness: 1,6mm on request Std. Accessory Radius: 450mm 45 17 8 23 8 CL55 LIGHT DUTY CABLE LADDER 17 CL76 Cross Rung Width 100 150 200 300 400 500 8 76 Rung Type CL55 CL55 CL55 CL55 CL55 CL55 45 55 45 Side Side Rail Thickness 1,6 1,6 1,6 1,6 1,6 1,6 Side Rail 8 13 Rail 23 CL55 Cross HCL Rung Cross Rung 18 CL76 MEDIUM DUTY CABLE LADDER 18 Width 100 150 200 300 400 500 600 800 1000 CL55 & CL76 Splice sets comprise: Rung Type CL76 CL76 CL76 CL76 CL76 CL76 CL76 HCL HCL 2 x Plates, 8 x M6 x 16 Cup Sq. Screws, Nuts & Washers Side Rail Thickness 1,6 1,6 1,6 1,6 1,6 1,6 1,6 2,0 2,0 Adjustable CL55 & CL76 Splice Sets comprise: 4 x Plates, 8 x M616 x Cup Sq. Screws, Nuts & Washers, 4 x M8 x 20 Hex. Screws, Nuts & Washers CL55 CL76 Load kg/m Load kg/m CL55 & CL76 VARIABLE INT/EXT 400 400 KIT COMPRISING: 2 x Side Pieces, 6 x M6 Cup Sq. Bolts, Nuts & &Washers 2 x M8 x 20 Screw & Nut + Washers 200 Cross Rungs from 100-1000mm Supplied Separately 300

100/500mm 150 300/1000mm

200 Specifically designed for horizontally 100 oriented installations. 100/200mm 100 50

SPAN SPAN 1 x Side Piece = 440 Radius 1,0 1,5 2,0 1,5 2,0 3,0 2 x Side Pieces = 650 Radius 3 x Side Pieces = 1000 Radius Use to create infinite directional changes

Standard Accessories (suitable for all ladders) Accessory Radius: 450mm. Other radii to order (For Covers see page 54-55)

CL55 Splices Tee Internal Elbow (Riser)

Horizontal Cable Cover CL76 Splices Bend 90° Clamp

Width Reducing Splice

Closed Cover (1,5m Long) P1450 Covers for standard External Cable Ladder Adjustable accessories also available Elbow Hold-down 4 Way Splice ALL COVERS (Dropper) Bracket Crossover MADE TO ORDER 50

POWERWAY CABLE LADDER - PW75/100/150

Standard finish galvanised (HDG) Standard Length: 3000mm Rung Spacing: 3mm00 Welded construction Slot Size : x 7mm25 Special materials & coatings on Material - Side Rail: 2,0mm request (3,0mm Side Rail to Order) Cross Rung: 0mm2, Standard Acc Radius:. 450mm P75W PW100

9 9 PW 75 , PW100 & PW150 POWERWAY 43 43 18 18 75 Width 150 200 300 400 500 600 800 1000 100 Side Side Rail Rail PW75, PW100 & PW150 Splice sets comprise: 2 x Plates, 16 x M 8 x 16 Cup Sq. Screws, Nuts & Washers PW150 45 Adjustable PW75, PW100 & PW150 Splice Sets comprise: 9 4 x Plates, 16 x M8 x 16 Cup Sq. Screws, Nuts 43 23 23 18 & Washers, 4 x M8 x 20 Hex. Screws, Nuts & Washers PW 105 Cross Rung Side Rail

PW75 PW100 PW150 Load kg/m Load kg/m Load kg/m 400 400 500

300/1000mm 300/1000mm 300/1000mm 400 200 300 100/200mm 200 100/200mm 150 100/200mm

200 1 05

100 100 100 50 50

SPAN SPAN SPAN 1,5 2,0 3,0 2,0 2,5 3,0 2,0 2,5 3,0 Specifically designed forside oriented installations.

Standard Accessories (suitable for all ladders) Accessory Radius: 450mm. Other radii to order (For Covers see page 54-55)

PW75 Splices Tee Internal Elbow (Riser)

Horizontal PW100 Splices Bend 90°

Width Reducing Splice

Closed Cover (1,5m Long) P1450 Covers for standard External Cable Ladder Adjustable accessories also available Elbow Hold-down 4 Way Splice ALL COVERS (Dropper) Bracket Crossover MADE TO ORDER 51

ANGLEWAY CABLE LADDER AW50/AW40

Standard finish galvanised (HDG) Welded construction Special material and coatings on request Angle iron with'top hat' cross rung (PW type cross rung)

Standard Length: 3000mm 5 Side rail profile: AW40 (40 x 40 x 5mm) AW50 (50 x 50 x 5mm) Rung spacing: 300mm AW50 A50W Slot size: 25 x 7mm Cross Rung Material - Side rail: 2,0mm Cross rung: 2,0mm Side 50 45 Rail Standard Acc. Radius: 450mm or 650mm

23 23 AW40 and AW50 Width 100 150 200 300 400 500 600 800 1000 50 2 AW40 and AW50 Splice sets comprise: 2 x Plates, 8 x M8 x25mm Hex set Screw, 8 x M8 Hex nut & 16 x 8 Flat Washer

5

AW40 A40W Cross Rung

Side 45 Rail 40

23 23

40 2

Drawings of accessories for reference only. (All Angleway made to order) (For Covers see page 54-55)

Tee Internal Elbow (Riser)

Horizontal Bend 90°

Splice Set

P1450 Cable Ladder Hold-down External Bracket Elbow (Dropper) 4 Way Crossover 52

ANGLEWAY CABLE LADDER AI50/AI40

Standard finish galvanised (HDG) Welded construction Special material and coatings on request Angle iron with'flat bar' cross rung Angle iron ladders can be manufactured 5 with/without any splicing or rung holes AI50 Standard Length: 3000mm Side rail profile: AI40 (40 x 40 x 5mm) AI50 (50 x 50 x 5mm) Side 50 Rung spacing: 300mm Rail AI50 Cross Rung 40 x 5mm Flat Bar Cross Rung Standard Acc. Radius: 450mm or 650mm 40

5 50

AI40 and AI50 Width 100 150 200 300 400 500 600 800 1000 5

Ai40 and Ai50 Splice sets comprise: AI40 2 x Plates, 8 x M8 x25mm Hex set Screw, 8 x M8 Hex nut & 16 x 8 Flat Washer AI40 Side Cross Rung Rail 40 40

5

40 Splice Set

Standard accessories see page 51

(All Angleway made to order)

GENERAL STRUCTURAL STEEL

6000mm standard length. Standard finish HDG. Stainless steel prices available on request.

FLAT BAR ANGLE IRON TAPER FLANGE 25 x 5 CHANNEL 25 x 25 x 3 30 x 30 x 5 30 x 5 76 x 38 25 x 25 x 5 40 x 40 x 5 40 x 5 100 x 50 x 6 STD 30 x 30 x 3 50 x 50 x 5 50 x 5 100 x 50 x 6 SL 53

CL130 CABLE LADDER

Standard finish galvanised Standard Length: 6000mm (HDG) 5800mm manufactured to order Rung Spacing: 300mm Welded construction Slot Size: 25 x 11mm Special materials & coatings on Std. Acc. Radius: 650mm 30 request 23 45 130 CL130 CABLE LADDER Side Rail 23 Width 150 200 300 400 500 600 800 1000 Rung Type HCL HCL HCL HCL HCL HCL HCL HCL HCL Cross Rung 30 Designed to meet NEMA Classification 20B = 1,6mm thick 20C = 2,0mm thick National Electrical Deflection 1/150 Manufacturers Association

Deflection 1/200

Side Rail 1,6mm Side Rail 2,0mm Load kg/m Load kg/m

400 400

1/150 Specifically designed for horizontally 300 300 oriented installations.

1/150

200 200

1/200

100 100

SPAN (Metres) SPAN (Metres) Wraparound CL130 Splice manufactured 4,0 5,0 6,0 4,0 5,0 6,0 from 2,0mm galvanised steel (HDG)

Standard Accessories (suitable for all ladders) Accessory Radius: 650mm. Other radii to order (For Covers see page 54-55)

Internal Elbow (Riser) Horizontal External Tee Bend 90° Elbow (Dropper) P1450 Cable Ladder Peak Covers Hold-down (1,5m Long) Bracket available for straight CL130 lengths only. Cover Clip CL130 Splices Closed Covers for straight lengths (1.5m long) and standard accessories also available. ALL COVERS MADE TO ORDER 4 Way Crossover 54

COVERS AND ACCESSORIES

Flat Covers and cover clips available for MCT/HCT perforated trays and RF trays, CL55/76, PW75/100/150 and CL130 Ladders Standard Length: Closed covers 1,5m Long Peaked covers available on request for all cable ladder straights only. Special lengths, materials and coatings on request. All covers are made to order

Wire Mesh Cover Clip

CL55/76 Cover Clamp

CL55/CL76 FLAT & PEAKED COVERS WWMD/WWHD FLAT COVERS Width 100 150 200 300 400 500 600 800 1000 Width 100 150 200 300 400 500 600 800 1000 Material Thickness 1.0 1.0 1.0 1.2 1.2 1.2 1.6 1.6 1.6 Material Thickness 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 Standard Finish HDG Standard Finish HDG

PW75/100/150 Cover Clamp

CL130 Cover Clamp

PW75/PW100/PW150 FLAT & PEAKED COVERS CL130 FLAT & PEAKED COVERS Width 100 150 200 300 400 500 600 800 1000 Width 100 150 200 300 400 500 600 800 1000 Material Thickness 1.0 1.0 1.0 1.2 1.2 1.2 1.6 1.6 1.6 Material Thickness 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.6 1.6 Standard Finish HDG Standard Finish HDG 55

COVERS AND ACCESSORIES

MDCT/HDCT Cover Clip RFMD/RFHD Cover Clip

MDCT/HDCT FLAT COVERS RFMD/RFHD FLAT COVERS Width 76 114 152 229 305 457 6 01 Width 50 75 100 150 225 300 450 600 750 900 Material Thickness 1.6 1.6 1.6 1.6 1.6 1.6 1.6 Material Thickness 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.6 1.6 1.6 Standard Finish HDG Standard Finish PG

PW75/100/150 Cover Clamp Flat Covers and cover clips available for MCT/HCT perforated trays and RF trays, CL55/76, PW75/100/150 and CL130 Ladder accessories.

All covers made to order or Manufactured to order only

RFMD/RFHD Cover Clip

CL55/76 Cover Clamp

MDCT/HDCT CL130 Cover Clamp Cover Clip Cover Clips & Clamps for all Ladders & Trays readily available 56

WIRING DUCT- LAY-IN WIRING RETICULATION

All Cabstrut Ducting, Splices and Accessories are pre- punched with fixing holes that make installation a whole lot easier and quicker SAVING YOU TIME AND THAT MEANS MONEY! Secondly NO POWER REQUIRED when running full lengths, just a rivet gun and the correct sized rivets. And to make life even easier, the pre-punched holes are slotted so there's no need to struggle locating the rivet* especially when the duct isn't straight and level. Comes as standard on: P8200 / P8300 / P8000 / P7810 / P9000 / P9800 / P9810 No pulling of cables necessary, all accessory covers are fitted after the wiring is complete! Suitable for all reticulation including lighting Can be customised for special projects ONE SPLICE SUITS ALL DUCT SIZES New universal splices suitable for all duct sizes from 76x50 to (Not suitable for P8100 Duct) 127x100. Simply bend on site for smaller profiles. Traditional U shapedFOLD-FROM-FLATTM splices are also pre- punched and available as an option.

P8300 - 5A Socket outlets at 1500mm staggered centres. Other centres to order.P9000, P7100, P8000 and P8300 can be manufactured to order with various outlets, e.g. 16A switched, 16A unswitched, 5A, 13A, etc. at centres specified. P2200 - 20mm knockouts staggered on both sides at 150mm centres. Capacity of Wireways Ducting vs. Conduit DERIVED FROM SABS 0142-1981

DUCTING EQUIVALENT No. OF CONDUITS Duct Covers TYPE 20Ø 25Ø 32Ø 40Ø 50Ø P3300 3 2 1 - - Standard finish (duct and cover): P4000 4 2 2 1 - Galvanised (PG) P1000 7 5 3 2 1 P2000 8 5 3 2 1 Covers are also available in grey and P8300 P2200 P2200 12 8 5 3 2 white PVC P8100 9 6 4 2 2 P7184 and P2200 covers in (PG) only P8200 18 11 7 4 3 Code i0005874 P8300 23 14 9 5 4 P8000 27 17 11 7 4 P7000 34 21 13 8 5 AS4 x 10mm P9000 46 29 18 11 7

34 51 22 22 22 22 51

P1000 41 x 41 x 2,5 P2000 41 x 41 x 1,0 P4000 41 x 20 x 1,5 P3300 41 x 20 x 2,5 P2200 51 x 51 0,8 P8100 76 x 25 x 0,8 P8200 76 x 51 0, 8x Std. Length 5m P2000 41 x 41 x 1,5 Std. Length 5m Std. Length 5m Std. Length 3m Std. Length 3m Std. Length 3m P1184 Cover Std. Length 5m P1184 Cover P1184 Cover Biscuit Tin Lid P8184 Cover P8184 Cover Wiring Duct Sizes 40 x 2500mm x 0,5 P1184 Cover 40 x 2500mm x 0,5 40 x 2500mm x 0,5 52 x 3000mm x 0,8 75 x 3000mm x 0,5 75 x 3000mm x 0,5 40 x 2500mm x 0,5

51

51 51 102 51 51 1.0mm TO ORDER ONLY

P8300 76 x 63 x 0,8 P8000 76 x 76 x 0,8 P7810 100 x 76 x 0.8 P9810 127 x 100 x 0.8 P9000 127 x 76 x 0.8 P9800 127 x 76 x 0.8 Std. Length 3m Std. Length 3m Std. Length 3m Std. Length 3m Std. Length 3m Std. Length 3m P8184 Cover P8184 Cover P8184 Cover P8184 Cover P9184 Cover P8184 Cover 75 x 3000mm x 0,5 75 x 3000mm x 0,5 75 x 3000mm x 0,5 75 x 3000mm x 0,5 125 x 3000mm x 0,5 75 x 3000mm x 0,5 57

Powder Coated on request.

Cabstrut FOLD-FROM-FLATTM Accessories Hand made on-site in seconds Accessories are easy to use and take up virtually no space in your store Fold upwards towards raised bubbles Bend-over tabs lock cover in place Accessories for all ducts are available Standard finish: Galvanised (PG)

Fold From Flat Standard Accessories External Elbow Internal Elbow Horizontal Elbow 3 Way Tee 4 Way Crossover Standard Splice End Cap

Universal Splice

Fold From Flat Radiused Accessories (Complete With Cover)

External Elbow Internal Elbow Horizontal Elbow Tee Radiused Crossover Radiused Distribution Outlet Hanger

Standard Solid Accessories

External Elbow Internal Elbow Horizontal Elbow 3 Way Tee 4 Way Crossover Standard Splice Hanger End Cap

LIGHTING & CEILING SUPPORT Fit standard adaptors at any point along the duct (22mm width opening)length . Hollow adaptor serves as a conduit Standard Accessories

P2540 P1200 HDSH Nylon (Including Nut) Top Hat 2400 mm Heavy Duty (M20) Swivel Hanger Purlin Clamp M6/M8 M10 & M12

PVC End Caps P2540 Fluorescent Hanger P1000, P2000, P3300 Brass (M20) Fitting P1272/U Flange & P4000 only Accepts Clamp Threaded 6, 8, 10 Rod or 12mm 10 Ø Max. PVC TRUNKING 58

Standard Accessories

Internal Angle

1 2 3 Stop End 5

4 6 External 7 Angle 8 9 10

COMPACT MINI TRUNKING Flat Colour - white Angle Installation is easy, neat and affordable with a wide range of accessories.

1. NBT/5 100 x 50 x 3000mm 2.NBT/4 Divider 33 x 12 x 3000mm Tee Unit 3. NBT/4 100 x 40 x 3000mm . YT/54 40 x 40 x 3000mm 5. YT/4 Divider 20 x 14 x 3000mm . YT/46 40 x 25 x 3000mm NBT/4 Socket . YT/37 40 x 16 x 3000mm Full range of accessories Outlet Cover 8. YT/2.5 25 x 25 x 3000mm for a professional finish. 15A . YT/29 25 x 16 x 3000mm 6896H . YT/110 16 x 16 x 2000 & 3000mm

CABLE LINE TRUNKING

Standard Accessories CABLE LINE TRUNKING Colour - grey and white External Angle Complete range of accessories for a professional finish.

1. CLT/6 100 x 100 x 3000mm 2. CLT/5 100 x 75 x 3000mm Internal Angle 3. CLT/4 100 x 50 x 3000mm 4. CLT/3 75 x 75 x 3000mm 5. CLT/2 75 x 50 x 3000mm 6. CLT/1 50 x 50 x 3000mm

Flat Angle

Tee Unit 1 2 3 4 Stop 5 End 6 59 SLOTTED PVC TRUNKING

Standard Length: 2000mm Colour: RAL 7030 grey

SABS approved Shock resistant and self-extinguishing thermoplastic that conforms with UL 94 VO Conforms to RoHs directive Lead-free material Base punching configuration to DIN 43659 Coining on all sizes that creates burr-free edges to reduce abrasion to hands and cables Pre-scored line at base as well as each finger to make a clean, precise opening for passing cables

Code Size (W x H) Code Size (W x H) Code Size (W x H)

i0005763 25 x 25mm i0005768 40 x 60mm i0005773 80 x 40mm i0005764 25 x 40mm i0005769 40 x 80mm i0005774 80 x 60mm i0005765 25 x 60mm i0005770 60 x 40mm i0014230 80 x 80mm i0005766 25 x 80mm i0005771 60 x 60mm i0005775 100 x 60mm i0005767 40 x 40mm i0005772 60 x 80mm i0005776 100 x 80mm

PVC FLOOR (HALF MOON) TRUNKING

Standard Length: 2000mm Standard Colour: Grey

SABS approved Shock resistant and self- extinguishing thermoplastic that 12 conforms with UL 94 VO 48 Conforms to RoHs directive 18 Lead-free material 70 20

Code Size (W x H) 95

i000 8577 48 x 13mm i0005777 70 x 18mm i0015023 95 x 20mm i0006308 48mm End cap i0006309 70mm End cap

CORNICE (TRIANGULAR) TRUNKING

Standard Length: 3000mm Standard Colour: White 55

SABS approved

Shock resistant and self-extinguishing 30 thermoplastic that conforms with UL 94 VO Lead-free material

Code Description i0005927 Duct & Cover i0005928 Divider i0005929 Int. Elbow i0005930 Ext. Elbow i0005931 Int. TEE i0005932 End Cap Int. ElbowExt. Elbow Int. TEE