Membership Roster and Product Reference Guide

SWPA is “Forging the Future of the Submersible Wastewater Pump Industry.”

Submersible Wastewater Pumping Systems Users And Specifiers Guide 2019 FREE TO SWPA MEMBERS! Users’ and Specifiers’ Guide 1

Membership Roster and Product Reference Guide

SWPA is “Forging the Future of the Submersible Wastewater Pump Industry.”

Submersible Wastewater Pumping Systems Users And Specifiers Guide 2019

Digital copies of the 2019 Submersible Wastewater Pumping Systems Users & Specifiers Guide are available without cost at www.swpa.org. 2 SWPA

"Forging the Future of the Submersible Wastewater Pump Industry”

Published by the Submersible Wastewater Pump Association, (SWPA) a national trade association serving the submersible wastewater pump industry, 350 North LaSalle Street, 9th Floor | Chicago, IL 60654. Phone: 847.681.1868 | FAX: 312.475.9022 | E-Mail: [email protected] | Web Site: www.swpa.org

Copyright © 2019 By The Submersible Wastewater Pump Association (SWPA) All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of the Submersible Wastewater Pump Association. Users’ and Specifiers’ Guide 3

Today’s Association Trends

SWPA’s Strategic Concepts incorporate the trends having the greatest impact on trade Associations today include a changing leadership role; value and return on investment; responsiveness; change loops (actions that result from other actions); consolidations and mergers; globalization; and image building. These trends are directly related to each other. Within that context, SWPA has created a Strategic Vision, Strategic Intent, and a Mission Statement to meet the Association’s purposes and objective, as defined in its bylaws.

Strategic Concepts

In the Conduct of the affairs of any trade Association, there are three critical functions, which the elected leadership must address if the Association is to prosper and grow. The First is the need to identify the common self-interests of the membership and the industry, there- by creating a vision for the Association. The Second is to develop, update and approve programs to serve those needs as the dynamic compo- nents of a strategic plan. The Third is to implement the strategic plan and monitor progress as staff and volunteer leaders carry those programs forward.

SWPA’S Strategic Vision

Our Strategic Vision for SWPA is an Association that thrives by assuming a leadership role through: • Information (providing access), • Technology (easy dissemination of the information), • Membership (people will continue to join because of a sense of community) and • Interaction (Associations provide the opportunity to interact face-to-face).

SWPA’S Strategic Intent

SWPA’S strategic intent is to be the respected voice of the submersible wastewater pumping systems industry to influence the industry and the public.

SWPA’S Mission Statement

The mission of the Submersible Wastewater Pump Association is to enhance the global wastewater environ- ment by informing, educating and providing leadership in the design, procurement and operation of submersi- ble wastewater pumping systems.

SWPA’S Purposes and Objectives

SWPA’S purposes and objectives are to promote increased use and consumption of Industry Products, to promote and provide for the welfare of the industry and to engage in all lawful activities appropriate for an industry trade association. 4 SWPA

Using This Roster And Product Reference Guide

This publication is a submersible wastewater lift station Users’ and Specifiers Guide to the members of the Submersible Wastewater Pump Association and the products they manufacture and sell.

he SWPA Membership Roster and Product Reference Guide includes basic industry information as well as general information about the Association and its programs and services and member company listings Tby category – Pump Manufacturers, Component Manufacturers, and Associate Members. Each listing includes the company's main address, phone and fax numbers, Web Site, Product or Service Codes (see below), and sales and technical contact information.

The SWPA Membership Roster and Product Reference Guide also contains descriptive information about the Association’s current and planned Technical Resources. our unique educational and training programs – all based on “The Systems Approach.” – and advertising from SWPA member companies.

Product Categories And Codes

The following product codes are used in this publication to identify the types of submersible pumps and component parts and accessory items manufactured and sold by SWPA’s member manufacturers and the services provided by the association’s Associate Members.

Submersible Pumps (AP) Axial Flow Pumps (GP) Grinder Pumps (TP) Turbine Pumps (CP) Centrifugal Pumps (IP) Industrial Pumps (OP) Other Pumps, as specified (DP) Dry Pit Submersibles (SH) Solids Handling (CP) Chopper Pumps

Component Parts and Accessories

(AC) Access Covers (GR) Guide Rail Systems (SS) Stainless Steel Enclosures (AT) Alternators (LA) Lift Station Accessories (VA) Valves (BS) Basins, Fiberglass (PC) Phase Converters (VFD) Variable Frequency Drives (CC) Cords/Cables (PM) Phase Monitors (WW) Wet Wells (CP) Control Components (PS) Pipe Penetration Seals (OO) Other component parts and (CT) Control Panels (PB) Poly Basins and Accessories accessory items, as specified. (EM) Electric Motors (SE) Seals Service Categories and Codes

The following services codes are used by SWPA to identify the services related to Industry Products provided by SWPA’s Associate Members.

(CE) Consulting Engineering Firm (PUB) Publisher (SYSTP) System Packager (DIST) Distributor (REP) Rep Organization (O) Other Services as Specified (SVSTA) Service Station Users’ and Specifiers’ Guide 5

Contents

Today’s Association Trends ...... 3 Strategic Concepts ...... 3 SWPA’s Strategic Vision...... 3 SWPA’s Strategic Intent...... 3 SWPA’s Mission Statement ...... 3 SWPA’s Purposes and Objectives...... 3 Using This Roster and Product Reference Guide...... 4 Product and Services Categories and Codes ...... 4 Membership Opportunities...... 6 Introduction...... 7 How SWPA is “Forging the Future of the Submersible Wastewater Pump Industry”...... 8 The Submersible Wastewater Pump Story...... 12 Selecting Submersible Pumps...... 14 Dry Pit Submersible Pumps...... 15 “The Systems Approach”...... 16 Educational Training Programs ...... 18 Standards for Submersible Pump Applications ...... 22 Standards Setting Organizations...... 24 SWPA’s Technical Resources...... 25 SWPA Technical Resources Under Development ...... 29 Notes on Operation and Maintenance ...... 30 SWPA Technical Resources Order Form...... 31 Pump Manufacturer Member Listings...... 32 Pump Manufacturer Members are manufacturers of submersible wastewater pumps for municipal and industrial applications that can efficiently handle solids. Periodic Station Checks and Inspections...... 34 Typical Submersible Pump Station...... 35 Component Manufacturer Member Listings ...... 36 Component Manufacturer Members are manufacturers of component parts and accessory items for submersible wastewater pumps and systems utilizing such pumps. SWPA’s Industry Community...... 38 Associate Member Listings ...... 39 Associate Members are non-manufacturers providing services related to Industry Products and/or who provide services to users of Industry Products. Advertisers’ Index...... 43 Member Company Profiles and Advertising ...... 44 6 SWPA

Membership Opportunities

SWPA is “Forging The Future Of The Submersible Wastewater Pump Industry” with a wide array of membership benefits and an extensive list of membership services.

SWPA brings value in a changing world. Membership is your vital connection to industry trends, outlooks and new business opportunities. As a SWPA member, you’ll… 1 Learn from your peers and expand your professional network. 1 Interact and network with other industry leaders. 1 Sharpen your skills and build relationships. 1 Keep up with new laws and regulations and how they impact the industry. 1 Assist in creating guidelines and tutorials that impact the industry. 1 Increase your clout. 1 Save time and money and find business partners. 1 Anticipate and prepare for the future. 1 Receive unique industry outlooks unavailable elsewhere.

The many benefits and services of SWPA membership are available to:

Pump Manufacturers - Business enterprises which are actively engaged in either the manufacture and sale of or the sale on substantially a nationwide basis in the United States of America of one or more Industry Products. (For membership purposes, SWPA defines Industry Products as: “submers- ible wastewater pumps that can efficiently handle solids.”)

Component and Accessory Manufacturers - Firms, partnerships, corporations or other types of business enterprises which are actively engaged in the manufacturing of parts or equipment distrib- uted on a nationwide basis for the types of submersible wastewater pumps manufactured by Pump Manufacturer members.

Non-Manufacturers (Associate) - Distributors, rep organizations, service stations, systems pack- agers, consulting engineering firms, trade publications and others providing services related to sub- mersible wastewater pumps for municipal and industrial applications and/or who provide services to users of those products.

To learn more about SWPA Membership Opportunities,visit the SWPA Web Site at www.swpa.org or contact SWPA Headquarters at 847.681.1868. Users’ and Specifiers’ Guide 7 IN TRodUCTION

HE SWPA Membership wastewater pumps and wastewa- Roster and Product ter lift stations and grinder pumps TReference Guide presents The SWPA Membership and grinder pump stations. basic industry information and Roster and Product information about the Association Reference Guide is published SWPA’s educational training and its programs, services, and annually as a service to the programs. SWPA holds an annu- activities. In addition, it includes submersible wastewater pump al Pumping Systems and Controls information about SWPA’s industry. It is a submersible Training Seminar. This event is member companies — the prod- wastewater lift station and packed with educational, hands ucts the Association’s Pump Grinder Pump User's and on training. Educational training and Component Manufacturer Specifiers Guide to the indus- is on a host of Industry specific Members sell and the services topics and also includes keynote provided by SWPA’s Associate try and SWPA’s members and speakers and topic presenters Members (non-manufacturers), contains a wide variety of making this publication a true useful information. who are leaders in the Water and submersible wastewater pumping Wastewater Industry. In 2013, systems users’ and specifiers’ the Program was expanded to guide. description about how submersi- included “200 Level” courses for See page 4 for information bles have come to dominate the those who wish to expand their about how to this publication, municipal lift station market. knowledge and participate in more including the product codes used advanced, intense training. These to identify the types of submers- Dry Pit Submersibles. An programs may also qualify for ible pumps and component parts explanation of dry well submersi- CEU credits and attendees receive and accessories manufactured bles and the distinct advantages SWPA technical resources and a and sold by our Manufacturer they offer over conventional dry course manual that includes all of Members as well as the codes pit installations to both the install- the presentations. used to identify the services er and the installer and the user. related to Industry Products* Selecting Submersible Pumps. How “The Systems Approach” provided by SWPA’s Associate – A primer describing the con- Optimizes Performance. “The Members. This publication also sidered in selecting submersible Systems Approach” is a method includes industry information as wastewater pumps for municipal that promotes better design well as information about SWPA’s and industrial applications. major programs and activities, as though more comprehensive follows: understanding of how all the com- ponents in a system interact with Test Standards Applicable To Submersible Pump Who We Are and What We each. Applications — There are a Do. This Guide contains descrip- tions of the Association’s mission, SWPA’s Technical Resources. number of National Standards objectives, purposes, and informa- Created by knowledgeable indus- applicable to submersible pump tion about SWPA’s distinguished try experts, these include unique applications. Most are American history and long list of achieve- books, pamphlets, white papers, National Standards Institute ments as well as an account of and other materials about sub- (ANSI) documents, published by how and why the Association mersible the Hydraulic Institute (HI). is “Forging the Future of the Submersible Wastewater Pump SWPA’s “Industry *For Membership Purposes, SWPA Industry”. Community” — SWPA created defines Industry Products as¨ submersible wastewater pumps that can efficiently its Associate Member category The Submersible Waste- handle solids.” because it understands that it is Water Pump Story. A brief See Introduction, Page 11 8 SWPA

How SWPA Is “Forging The Future Of The Submersible Wastewater Pump Industry”

s the association is dependent factors. This is accom- “Forging the Future The Submersible plished by better understanding of Aof the Submersible Wastewater Pump wet well design, hydraulics, and Wastewater Pump Industry” Association (SWPA) is a all the components that make up by publishing a wide range of national trade association these systems. technical resources, presenting representing and serving Within that context, our pro- unique educational training sem- manufacturers of submers- grams and activities are focused inars, working with recognized ible wastewater pumps for on these three areas: Standards Setting Organizations, municipal and industrial and offering other programs and applications, manufactur- Industry Guidelines – Working services, it is creating new initia- ers of grinder pumps for with Standards Setting and Code tives to meet today’s – and tomor- Residential and Commercial development organizations to row’s – informational and training applications, manufactur- encourage wider acceptance of needs. ers of component parts and submersible pumps in wastewater accessories for submersible applications. These efforts are SWPA is the industry’s leader in wastewater lift stations and aimed at developing voluntary providing accurate, up-to-date, grinder pump stations, and product guidelines for effective technical information about: firms providing services to product use. users of those products. • Submersible wastewater Education – Informing speci- pumps and the component fiers and users about the work- parts and accessories in lift ings and benefits of submersible stations using solids-han- SWPA’s dedicated members dling pump systems. and staff have worked diligently wastewater pumps, representing to position the Association as the the interests of members of the • Grinder pump stations for premier resource for technical Association in the public interest. residential and commercial information on submersible applications and the compo- Promotion – Encouraging the nent parts and accessories in wastewater lift station systems use of submersible wastewater those installations. and grinder pump stations. pumps in municipal and indus- The technical informa- trial applications to increase their Now in its fifth decade of service tion created and distributed by acceptance and build the industry. to the submersible wastewater SWPA is based on “The Systems pump industry, SWPA is recog- Approach” and is intended to SWPA’s Pump Manufacturer nized as the spokesperson and the meet the needs of those who Members are manufacturers of premier informational and train- design, build, install, service, submersible wastewater pumps ing resource for the submersible maintain and operate lift stations for these markets. They repre- pump segment of the wastewater using solids-handling pumping sent the bulk of U. S. shipments industry and looks proudly upon systems in municipal and industri- of Solids-Handling, Dry Pit its long legacy of service. al applications and grinder pumps Submersible, and Grinder Pumps. SWPA attained that status by in residential and commercial creating and utilizing a compre- applications. SWPA’s Component hensive network of resources. By Manufacturer Members are mobilizing those resources, The “The Systems Approach” manufacturers of component Association has built an impres- optimizes performance by pro- parts and accessory products for sive list of achievements and moting the proper design of a sub- submersible pumps and pump- accomplishments. mersible pump lift station, which ing systems. They supply pump depends on many mutually inter- manufacturers as well as the after- Users’ and Specifiers’ Guide 9 market. e-book format on SWPA’s website SWPA’s Associate Members Strategic Partnerships – Most at www.swpa.org. are non-manufacturers who pro- recently, SWPA has developed a vide services related to Industry series of Strategic Partnerships Publishing the Field Start- with other industry Associations, Products, including distributors, Up and Check-Out Procedures organizations, and publishers to rep organizations, consulting Manual for Submersible Sewage help its members prosper and suc- Lift Stations -- A practical, 28- engineers, systems packagers, ceed. page text that presents step-by- service stations, and publishers. In these Partnerships, the step procedures, based on equip- Association chooses to align itself ment available, for putting a new SWPA is the focal point of the with respected partners that are lift station into operation or tuning industry's communications net- passionate about their respective organizations and committed to a an existing stations…a distinctive work, providing a forum for pool- “How To” guide with explana- ing of skills and know-how, and wider range of influence through augmented networking opportuni- tions for field personnel. facilitating the exchange of infor- ties. These relationships enhance mation on common problems, SWPA’s membership and mem- Creating a Statistical Reporting issues and concerns. bership services and benefits by Program that provides quarterly allowing the Association to offer data on Solids-Handling, Dry SWPA maintains a data center, more tools and contents to help Pit Submersible by discharge providing information to the trade them thrive and prosper. size, Grinder Pump shipments by and consumer press, industry- We have a distinguished his- horsepower, Chopper Pump ship- related business groups, users, tory, a wide ranging record of ments by horsepower, as well as service and a long list of achieve- and members. semi-annual data on the destina- ments and accomplishments tions of those shipments. including: SWPA serves the entire submers- Producing an Annual Industry ible wastewater pump industry. The Submersible Sewage Outlook Survey – Each Fall, One of our most important goals Pumping Systems (SWPA) is to increase the acceptance and Handbook, 4th Edition (2012) SWPA conducts a survey of its members to gather information sales of Industry Products.* — a 248 page technical volume that was developed by a task about expected industry per- formance for the coming year. SWPA represents its mem- force of industry experts. This unique publication familiarizes Included are forecasts of pump bers with groups involved in the and assists those responsible for shipments by types and sizes and selection, installation, and use designing, installing, maintain- projections for a wide range of of Industry Products* — includ- ing, and operating lift stations component parts and accessories ing engineers, specifiers, users, using submersible solids-handling for submersible wastewater lift Standards Officials, and Code pumps. stations and grinder pump sta- Authorities. The Fourth Edition is expand- tions. The survey also solicits ed and revised. It includes a new information on the expected SWPA assists its members by chapter on Submersible Motors, “drivers” of industry sales, new providing information on subjects an expanded chapter on Grinder product trends, and other informa- of general industry interest such Pumps in Pressure Sewers, a new tion. chapter on valves, updated charts as marketing trends and industry and tables and much more. Distributing “The Very “drivers.” The SWPA Handbook has been Versatile Submersible” – A video “The Bible” of the industry since SWPA is and has been a leader in it was introduced in 1984 in a soft training program that was cre- the growing submersible waste- cover version. There is no better ated to inform viewers of the water pump industry since its reference tool. It has been pub- advan-tages and multiple uses of inception in 1976. lished in hard cover format since submersible wastewater pumping *For Membership Purposes, SWPA 1986. Since its launch, more than equipment. defines Industry Products as “submers- 30,000 copies have been distribut- This eight-minute course was ible wastewater pumps that can efficiently ed throughout the world. designed for use at seminars, handle solids.” The Handbook is available in schools, and other meetings and 10 SWPA discusses some of the ways this grinder pumps and pres- ry-oriented program where attend- versatile machine serves spec- sure sewers; and a series of ees learn to better understand ifiers and users throughout the Definitions, Drawings and the basics of lift station controls, world. Common Terminology. control considerations and con- • Grinder Pumps in Pressure trols trouble-shooting. Publishing the SWPA Sewers, a primer to raise the The individual presentations Standardized Presentation awareness and describe the provide technical information, Format for Pump and Motor advantages of these products address practical user concerns, Characteristics. The format and how they are used. describe common troubleshooting includes the minimum informa- • A generic Training issues and present the tools avail- tion needed by a specifier or Presentation entitled “An able to solve them in existing or designer to adequately evaluate Introduction To Grinder new control systems. using specific equipment for an Pumps In Pressure Sewers” Since most pump systems last individual application. that can be used for a gen- more than 15 years, excessive Information is presented eral information presentation costs related to inefficiencies can in a consistent format to the or a training tool. This tuto- accumulate if left unchecked. designer or specifier can make rial is posted on the SWPA Optimum design and operation an informed comparison between web site (www.swpa.org) in efficiency are in the best interests different brands or types of a downloadable pdf format. of all facilities using submersible equipment. pumps, which rely heavily on A series of standardized pump/ Introducing state-of-the-art pumping systems for operation of motor definitions of the terms educational training programs critical processes. that the data represents is an where attendees hear and interact Inefficient pumping sys- important element of this SWPA with industry experts in the same tems can be large energy wast- Technical Resource. place, at the same time, and tap ers. Effective maintenance and into their extensive experience through system assessments can Creating a Grinder Pumps and wide-ranging expertise. in Pressure Sewers Committee keep pumps performing at their whose mission is: “To serve as a best. SWPA’s Annual 2-Day technical, marketing, and public That is why both of these Training Seminar is divided relations information resource programs are based on “The into two separate, but compli- Systems Approach” to the Design, center to the membership, the mentary tracks...The Pumping Construction, Operation and industry, the marketplace, and the Systems Training Seminar Maintenance. general public on grinder pumps Track provides a comprehensive The overwhelming success in pressure sewer systems.” description of pumping system of this unique, 2-day forum has The Committee’s primary design and how the many com- allowed us to further expand the goals are to develop technically ponents of a total submersible oriented products and services on pumping system influence and program to include a series of pressure sewer systems and cre- affect each other. By attending advanced topics. This additional ate and distribute marketing and these seminars, attendees learn Track will allow participants to public information materials such better system design though take their learning to a higher level. as these: understanding the impact of each • A comprehensive Press component on the other and on Presenting additional training Information Kit which the total system. programs on an “as needed” includes a white paper basis such as “Hydraulic Design entitled “A Pressure Sewer SWPA’s Controls Systems Of Rotodynamic Pumps — An Overview – A Proven Training Track presents an Intensive Course For Hydraulic Approach to Moving up-to-date roadmap to the rapidly- Pump Designers.” Wastewater from One Point changing world of pump station to Another”, a series of controls and control considera- Frequently Asked Questions tions. (FAQ’s) and Answers about This is an application and theo- Users’ and Specifiers’ Guide 11

Introduction Continued from packagers, consulting engineering Additional copies of this publi- page 7 firms, and others providing ser- cation in hard bound or electronic format are available upon request in need of balanced input from vices related to Industry Products the entire submersible wastewater and/or who provide services to from SWPA Headquarters. The pumping system “community” users of Industry Products repre- publication is also posted on the and that distributors, rep organi- sent a vitally important segment SWPA Web Site at www.swpa. zations, service stations, systems of this “community.” org.

SWPA has once again partnered with Pumps & FREE TO SWPA MEMBERS! Systems Magazine to create the SWPA Training Resource Center, an on-line/on-demand video training curriculum accessible from either www.swpa.org or www.pumpsandsystems. com. Participants will earn SWPA Certificates of completion, which may be submitted for CEU/PDH credits. The site will also serve as a repository for Industry News and Articles, Technical Articles, Case Studies, SWPA Manuals, Handbooks, etc. as well as a calendar of SWPA events. All of this will be included in your SWPA Membership dues.

• And more topics updated and added quarterly 12 SWPA The Submersible Wastewater Pump Story

ixten Englesson is credit- Growth of the market for ed with developing the first submersible wastewater pumping Ssubmersible wastewater Originally used in Europe, equipment has since been dra- pump in Sweden. That pump was submersible wastewater pumps matic, as an increasing number of manufactured in 1956 and had a became popular in the early specifiers and users learned of its 1960s when a guide-rail sys- discharge connection and level advantages. regulator It became popular in the tem was developed to lift There are two classes of sub- early 1960s, when a guide-rail the pump out of well pits for mersibles. One is the smaller system was developed to lift the easy maintenance and repair. unit, used in home and light com- pump out of well pits for easy This ended the dirty and mercial applications. These nor- maintenance and repair. sometimes dangerous task of mally handle up to 2-inch spheri- Submersible pumps offer these sending people into the wet cal solids and range from 1/3 to 2 advantages: pit. Submersibles are now the horsepower. These are commonly • Low initial cost since they dominant pump in the munici- called "sewage ejectors". involve only one pit and pal lift station market. less auxiliary equipment is Larger submersibles are dis- required than for dry well/ cussed here. They handle 2-1/4 wet well installations. and for industrial sump or process inch and larger solids and have a minimum of 3-inch discharge. • Low operating costs based effluent applications. on Life Cycle Costing They are used in municipal and (LCC). Submersible Wastewater industrial applications, for pump- ing all types of wastewater. • Safe and quiet installations. Pump Manufacturers have improved the performance of their • A minimum of unsightly products to a very high degree, Advantage of Submersibles above-ground equipment. optimizing design as well as Submersible wastewater pumps • Reliable operation over a manufacturing techniques. Today, have a number of advantages to long life. submersible wastewater pumps users. are highly efficient, extremely ubmersible ift tation A S L S reliable, long-lasting machines. One of those major advan- includes not only the pump-motor One common use for small tage is low initial cost. In unit, but also sophisticated elec- pumps is to move effluent from wastewater pumping applications, trical and mechanical controls, a tank to disposal in septic tank only one pit is necessary, which piping, and a wet well with access systems. Large and small units are frame and cover. reduces initial investment. There used in a variety of ways in the Submersible pumps are also is no need, in most installations, home, farm, motel, school, widely used to handle suspended for ventilation, lighting, or other marine, commercial building, solids effectively and efficiently. equipment, which is normal for industrial plant, and municipal dry pits. Flooding problems are wastewater and stormwater sys- Submersible Solids-Handling also eliminated. tems. Wastewater Pumps operate Submersible pumps have been under water, are flood-proof, and A second important advan- proven over more than a half- are designed for single, wet-pit tage is low operating cost. century, disproving those skeptics use. They can be removed easily Compared to above-ground who originally asked how an elec- for maintenance. They operate pumps, for example, submersibles tric motor-powered pump "could efficiently and quietly, are safe to are more efficient. Submersibles install, and perform reliably for run under water". Submersibles have the obvious hydraulic advan- many years. are now used around the world to tage of working in the water These pumps are used prima- pump clear water, raw water, and and not some distance above it. rily for wet-pit wastewater lift wastewater. Millions are in daily stations use. Submersibles never lose prime. Users’ and Specifiers’ Guide 13

Submersibles have safety and direct-coupled, extra-heavy duty up to 100 HP or larger. noise reduction benefits, too, units, which operate under water Variable speed units are also since the working installation is and have a solids-handling capa- available with the use of variable well below ground level. There bility. frequency and voltage power sup- is less chance for accidents from While single pumps (simplex plies. Again, depending on the an exposed motor and there is a systems) are often installed, most application, motors operating on minimum of noise when the pump applications require two pumps 200/208-volt, 230-volt, 460-volt, is operating. (duplex installations) to insure 575-volt and higher are available. continued operation if one pump Motors may be single-phase or With Submersible Pump fails, to minimize wear on one three-phase, as specified. Single- Applications, there is a mini- pump and equalize it between phase units are usually limited to mum of above-ground equipment two, and to provide extra capacity 10 horsepower. Thus, submersi- -- usually only the control box in times of extraordinary loads. bles can be tailored to specific and a frame for use in attach- A submersible pumping system requirements. ing the hoist for removal of the consists of the motor-pump unit Capabilities: Like any pump, pumps. There is no unsightly together with automatic electrical submersibles can also be tailored pump or any need for a pump controls. to the capacity requirements of house. the particular installation. For Moreover, because wet wells System Controls. Controls example, a specifier can ask for a are designed so incoming waste- can be simple or complex, high dynamic head, or can accept water scours the bottom, there is depending on the application. a lower head and obtain a higher little chance of emitting offensive The latter may consist of an entire gallons-per-minute flow rate - or odors. factory-packaged station enclosed can get both a higher head and a in a steel or fiberglass tank ready higher flow rate by increasing the But the most striking advan- for installation and pipe-electrical horsepower rating. tages of submersibles are hookup. Typically, dynamic heads range reliability and long life. Submersibles are being speci- from 15 to 300 feet. Flow rates Submersibles are designed to fied increasingly in applications range from 10 to 2,500 gpm and operate efficiently under water. where self-priming, dry pit, larger pumps produce 10,000- Submersibles run only when need- straight centrifugal, vertical gpm or more. The pump-motor ed, reducing wear and power bills. extended-shaft, and pneumatic unit can be tailored to installation Suction pipe clogging and net ejector pumps once dominated. needs. Many larger pumps can be positive suction head (NPSH) Discharge Size: Depending used in conjunction with a vari- problems are also eliminated. on the impeller design, a 4-inch able speed drive (VSD) to further The water cools the motor natu- discharge pump will normally fit the performance to the applica- rally, adding to its life span. Field handle spherical solids from 2- to tion. service is simple and sure. 3-inches. And, submersible pump manu- Each manufacturer’s litera- Control panels are engi- facturers report that fewer than ture specifies the maximum sol- neered for the particular installa- one-half of one percent of the ids size, which can be handled tion. The heart of the control sys- pumps they ship are returned for by a particular pump. Normal tem for submersibles is the liquid replacement. discharge sizes for larger sub- level control, which activates and Submersible wastewater pumps mersibles range from 3-inches to deactivates the pump(s) at speci- are the fastest-growing products 14-inches and larger. The pump fied levels within the wet well. in the fast-growing wastewater selected should be sized to the The simplest control system and solids-handling field. application. contains an On-Off magnetic con- Motors: Submersible pump tactor and disconnect. Systems Pump Features. Here’s an intro- motors can be sized to the appli- normally have three sets of con- duction to the selection and use of cation. They are normally avail- trols -- one for turning off the this fast-growing product. able in 850, 1150, 1750, and even first pump, one for turning on the Description: Submersible 3450 RPM designs, on 60-cycle pump, and one for the high liquid wastewater pumps are vertical, power. Horsepower ratings range alarm. 14 SWPA

Duplex systems usually alter- trols are needed for a particular major cost savings to the user. nate pumps on each successive application, and then manufacture Complete packaged wastewater cycle. Duplex systems may also the control panel to this specifi- lift stations are available. These include an override control, which cation. All are built to NEMA packages include everything from brings in the second pump when (National Electrical Manufac­ the tank to the pump-motor unit, in-flow is unusually heavy or in turers Association) Standards guide rails, piping and valves, all case of failure of the first pump. and in accordance with the NEC controls, etc. – and are shipped Control panels are installed (National Electric Code). ready for installation. above ground, and usually con- Wet pit installation is a major Access frames and covers tain: pump disconnects; across- advantage of submersible waste- are available for either wet pit the-line starters with overload water pumps. Only one pit is or sump allocations. They are protection; hand-off-automatic required. The pump is usually designed so the cover can be selectors, elapsed time meters, and installed on guide rails. locked safely in the open or alarm systems for indicating high closed position. level conditions in the wet-well. Servicing. If field service or Traffic-bearing covers are also In addition, duplex systems replacement is needed, the pump available. provide for automatic sequencing is easily lifted to the surface using Many submersible pumps are and alternating of pumps. guide rails. being used as replacements in Alternation allows for equal When lowered into position, older systems. run time and wear of the the pump outlet flange automati- For example, numerous sub- pumps. Alarm systems vary but cally seats with the discharge pip- mersibles pumps were used to can be visual, audible or remote ing. There is no need for wrench- replace typical, non-submersible monitoring by telemetry devices es, special tools, or for anyone to centrifugal pumps after events or telephone lines. enter the pit. like Hurricane Katrina at waste- Most submersibles can be ser- water treatment plants and pump Pump manufacturers will assist viced in the field without disturb- stations in the New Orleans area. designers determine which con- ing the piping. This represents a

Selecting Submersible Pumps

ubmersible Centrifugal Pumps come in different designs, each with specific characteristics and capa- bilities to meet various operating conditions. Pump capacity is determined primarily by the speed, size, Sand design of its impeller, which creates liquid head and flow through its rotating motion. Other fac- tors in capacity are friction, leakage, and shock losses. The volute -- or stationary part of the pump -- guides the liquid being pumped through the discharge opening. The size of the impeller passages and the clearance between the impeller and the volute allows for the passage of solid particles in the liquid. When pumping wastewater, a major design criteria is the ability of the pump to pass solids. Submersible wastewater pumps are often rated by the maximum size of a solid that they can pass (“sphere size”.). This is a very rough measure of a pumps’ ability to handle solids bearing liquids, in that the type and quantity of solids varies considerably between liquids. Most solids found in wastewater are compressible and can easily be broken apart, therefore limiting the value of the “sphere size” criteria. Until a standardized test for solids bearing liquids has been developed, user experience is the best base for matching a suitable pump design to an application. The design of the approach piping and the sump should be done in a manner to minimize the deposi- tion of solids. A minimum approach flow/velocity of about 2.5 ft/sec (0.8 m/s) is required in the suction piping to prevent solids from settling and combining with other solids to form a larger solid with a size capable of clogging the pipe, valve, or pump. Users’ and Specifiers’ Guide 15

Dry-Pit Submersibles

ubmersible pumps, orig- • Reduced vibration. inally developed for use • Simpler support design. Sin applications where the SWPA defines a Dry Pit pump unit will be submerged in Submersible Pump as: A sub- • Increased utilization of the pumped liquid, are now wide- mersible pump, originally available space. ly used in dry well stations where developed for use in applica- • Elimination of shaft losses. the wet well is separated from the tions where the pump unit dry pump chamber. • More efficiency. will be submerged in the pump liquid, being used in a dry Dry well submersibles offer SWPA members report that the well station where the wet distinct advantages over conven- dry pit submersible pumps being tional dry pit installations to both well is separated from the purchased today are getting larger the installer and the user. Their dry pump chamber. compact design, installation ver- in horsepower and discharge sizes satility, and resistance to damage and that coastal users are purchas- from flooding make them ideal solids handing line shaft pumps. ing more and more of these prod- for use in both new and retrofit Dry-pit submersibles are also ucts because of storm drainage. pumping stations. more efficient and more reliable. Ideal for either new stations or In today’s challenging environ- retrofitting existing stations, dry ment, municipalities are faced pit submersibles offer unmatched with financial issues due to an Dry-pit submersibles also offer versatility and flexibility for aging infrastructure and a reduc- installation advantages: submersi- tion in service personnel due to ble motor that will run wet or dry, wastewater pumping stations. funding reductions from federal, require little or no maintenance Their compact, self-contained state, and local budgets. and with no vibration problems design offers significant savings Large pump stations are typi- for the pump station. in installation costs over conven- cally the conventional dry-pit / tional, coupled dry pit pumps. wet-pit design with a motor locat- Dry-pit submersibles offer The fully submersible, inte- ed floors above the pump con- installation advantages: grated motor offers trouble-free nected by a shaft. This design requires increased • No damage from flooding. pumping, even in the event the dry well is flooded. With a wide manpower for maintenance and • No vertical shafting. can present problems with exces- range of sizes, motor powers, and • No coupling alignment. sive vibration to the pump, motor, impeller types available, dry pit and structure. The dry-pits are • No packing or seal water submersibles offer alternatives to prone to flooding as evidenced by leakage. conventional, coupled pumps in the weather in recent years. • No seal water. nearly every type of wastewater Manufactures have designed a pumping application. submersible motor that will run • No hazardous rotating com- wet or dry, require little or no ponents In summary, dry-pit submersi- maintenance and with no vibra- • No dry well cooling. tion problems for the pump sta- bles offer reduced initial costs, tion. reduced installation costs, and Dry-pit submersibles also offer reduced maintenance costs when system advantages: Dry-pit submersibles offer used as a replacement for con- municipalities reduced initial • Simpler controls. ventional dry-pit / wet-pit solids costs, reduced installation costs, • More frequent starts and reduced maintenance costs handing line shaft pumps. Dry-pit allowed. when used as a replacement for submersibles are also more effi- conventional dry-pit / wet-pit • Wider range of operation. cient and more reliable. 16 SWPA “The Systems Approach”

ubmersible wastewater maintaining a submersible waste- pump manufacturers have water lift station. Simproved the performance “The Systems Approach” opti- of their products to a high degree, mizes performance by pro- Most of the Association’s cur- optimizing design and manufac- moting the proper design of rent technical resources describe turing techniques. Today, sub- a submersible pump lift sta- the components of a lift sta- mersible wastewater pumps are tion, which depends on many tion and how they work. These highly efficient, extremely relia- mutually interdependent fac- descriptions are being expanded ble, long-lasting machines. tors. This is accomplished to include detailed information Submersible wastewater by better understanding of on how the components are inte- pumps, which are often purchased wet well design, hydraulics, grated into the system and how as individual components, provide and all the components that they interact with the other parts a service only when operating make up these systems. and pieces to make the total sys- as part of a total system. The tem work to peak efficiency and proper design of that system effectiveness. In addition, these — a submersible pump lift station pressure. current descriptions are being — depends on many mutually When transporting fluid, the expanded to explain how each dependent factors because these pump installation is sized to han- component affects the others such as the valves’ affects on the pump pumping stations are complex and dle a maximum flow, which, in and the pump’s affect on the their design requires considerable practice, often never occurs. The valves. engineering expertise. By better energy and materials consumed in By publishing and promoting understanding wet well design, accomplishing this task depend on “The Systems Approach” infor- hydraulics, and all of the compo- the design of the pump, the design nents that make up these systems, mation, SWPA is helping consult- of the installation, and the way “bottom-line” performance is ing engineers, specifiers, users, the entire system is operated and optimized. and others gain a better under- maintained. standing of the pump, valves, “The Systems Approach” control panels, VFDs, basins, To Understand a complex encourages careful analysis of the mechanical seals, and other com- pumping system like a submers- end-use requirements to deter- ponents and how they interact for ible wastewater pump lift station, mine if the pump and each of the optimum performance, minimum it must be realized that all of the system components is efficiently maintenance, and long life. system components are interde- sized and configured to meet the pendent and must be carefully end use-requirements; screen- This Focus on SWPA’s “Systems matched to each other and remain ing the system to help optimize Approach to Lift Station and so throughout their working improvement opportunities; Grinder Pump Station Design, lives. Those system components calculating life cycle costing for Operation and Maintenance of typically include the source and maximum energy efficiency; and Submersibles is encouraging and finding symptoms that could lead designation sumps or tanks, indi- promoting better system design to inefficiencies. vidual pipelines, pumps, valves, through a more comprehensive and items that control the rate or understanding of the impact of direction of flow. The Pump’s Task -- All pump- each component on each other ing systems are comprised of a This is why one of SWPA’s and on the total system. pump, driver, pipe system, and strategic initiatives is to expand SWPA’s efforts in this area operating controls. The pump’s its publishing and educational are helping consulting engineers, task in the system is to deliver a activities and promote “The specifiers, users, and others iden- liquid through pipes or ducts to a Systems Approach” when design- tify and understand what they remote point against the system ing, maintaining, operating, and must know about the total Users’ and Specifiers’ Guide 17 system to select the proper com- • Reduces the time element about each will be an integral part ponents for a given design. for repairs. of these efforts in the years ahead. benefits of “the systems “The Systems Approach” opti- SWPA will continue its strate- approach” – “The Systems mizes performance of the pump- gic initiative of creating Technical Approach” promotes proper ing system because it assures that design by: the matching of multiple pieces of Resources promoting and focusing equipment will operate to provide on “The Systems Approach” by the best performance. working closely with established • Determining the proper Standards and Code development horsepower and impeller siz- “The Systems Approach” estab- organizations to create new Test ing of pumps. lishes a standard format for sub- Standards as well as performance mittals and approvals since it: • Determining the proper and design guidelines for all of power requirements. • Provides standard pump the components of a submersible • Sizing the wet well, frame charts. lift station and grinder pump sta- and covers, valves, and other • Provides pump test stand- tion. These efforts will be aimed ancillary equipment. ards. at developing voluntary product • Provides engineering, appli- guidelines for effective product “The Systems Approach” cation and operations use. determines system responsibility The Association continues because: manuals. “The Systems Approach” to work with Code develop- • Complex systems with mul- assures matching multiple pieces ment organizations to insure the tiple component parts such of equipment for optimum perfor- Industry’s needs are met. as pumps, control systems, mance. “The System’s Approach” is valves, and special start/stop also being used as the basis for units require unit responsi- Component Standards and the Association’s expanding edu- bility. Guidelines – Developing test cational and training programs, • Unit responsibility elim- standards and performance and including its Annual Pumping inates the questioning of design guidelines for each compo- Systems Training and Controls cause of failure and isolates nent of a lift station and present- Training Seminars as well as its it under a single source. ing educational training programs on-line training programs. 18 SWPA Educational Training Programs

s an essential element submersible wastewater pumps…. of its strategic initiative the typical installation of seals as Ato promote “The Systems As an essential element of it relate to submersible pumps; Approach” (see page 16), its strategic initiative to basic seal components and ter- SWPA’s comprehensive educa- promote “The Systems minology; seal styles and types; tional and training programs focus Approach” SWPA presents standard mechanical seal materi- on this approach. an annual training seminar als, and common causes for – A Pumping Systems and mechanical seal failures. SWPA and Pumps and Systems Controls Training Seminar, Magazine produce a multi-part as well as a new, state-of- AC Motors For Submersible webinar series on the systems the-art on-line/on-demand Pumps – The focus of this ses- approach to lift station design. Training Resource Center sion is on the construction, rating, CEU/PDH credits will be issued through a partnership with and application of submersible for completion. The webinars Pumps & Systems Magazine. motors…motor construction fea- will be presented free of charge. tures including basic design of For more information, contact the motor, winding and insulation SWPA Headquarters at 847-681- materials, and cooling systems … Attendees learn about better sys- 1868 or visit www.swpa.org. motor ratings such as efficiency, tem design through understanding power factor, torque, etc…explo- the impact of each component on Annual Pumping Systems sion proof motors, and insulation the other and on the total system. Training Seminar – Following classes. The featured presentation that its introduction in 2002 SWPA’s sets the stage for the entire pro- Pumping Systems Training Electrical Starting Methods gram is entitled “The Systems Seminar fast became an industry For Submersible Pump Approach to question: “What event, attracting consulting engi- Stations – During this session, is The Systems Approach” and neers, designers, specifiers, users, attendees learn the considera- Construction, describes, in Lift distributors, reps, product manag- tions for the selection of electrical Station Design,Operation and ers, technical managers, engineer- starting equipment for submers- Maintenance.” This presenta- ing managers, sales and marketing ible pump systems. The most tion answers the details, how managers, product specialists – practical approaches of direct it benefits the design engineer, and many others with an interest across the line start, reduced volt- manufacturer, sales representative, in the design, applications, and age, and variable speed systems contractor, and the end user. use of submersible wastewater as they relate to “The Systems The program typically includes pumping systems for municipal Approach,” are emphasized. sessions such as these: and industrial applications from as far away as Alaska, Mexico Applying Variable Frequency Lift Station Valving – The ses- and Puerto Rico. sion addresses the design and selec- Drives (VFDS) to Submersible This one-of-a kind program tion of check valves, air valves, Pumps – This session describes presents a comprehensive descrip- and plug valves for wastewater lift how pumps operate in variable tion of pumping system design stations. The types of valves on speed applications and what is and how the components of a the market is examined and, more critical for successful variable total system influence and affect importantly, how they interact with- speed pump stations. Discussions each other. in the system is analyzed. focus on the proper pump selec- The proper design of these sys- tion, potential for energy savings, tems depends on many mutually Mechanical Seals f­or rules of thumb for VFD appli- dependent factors because they Submersible Motors – cations, NEMA MG1 part 31 are complex and require con- Attendees learn about the use of requirements and other aspects siderable engineering expertise. mechanical seals as they apply to of applying VFDs to submersible Users’ and Specifiers’ Guide 19 motors. Training Seminar – in 2008. This This modern pump and con- in-depth program is designed for trols technology can help munici- Pump Station Control water and wastewater pump sta- palities weather economic crisis Considerations – The typical tion service personnel, pump sta- and save precious dollars. elements of pump control panels tion opera-tions personnel; water SWPA’s Controls Training and an overview ofomponents and and wastewater service person- Seminar, too, is a one-of-a kind options available is presented. nel who work with submersible program and provides a an up- wastewater pumping systems on to-date roadmap to the rapidly- An Overview On The Basics a daily basis and those who work changing world of pump station Of PLC Controls – Attendees for Pump/ Rep Service organiza- controls and control considera- learn how they are used, how they tions. tions and related topics. come about, and where they’re This is also an ideal education- The featured presentation that going. This session also provides al opportunity for representatives sets the stage for this program is an introduction to PLC technol- of submersible pump manufactur- also on “The Systems Approach” ogy by illustrating its evolution ers, submersible lift station com- but focuses on controls and con- from its earliest beginnings to ponent manufacturers, distribu- trol considerations. its modern state. Also provided tors, service shops, and consulting The program typically includes is insight into where the field is and specifying engineers who sessions such as these: going, and what can be expected. need a better understanding of the Included in this session is a dis- basics of controls and controls Schematic Training, Symbols, cussion of benefits, applications, trouble-shooting. and Troubleshooting – An HMI, SCADA systems, common To gain the most from this introductory look into reading and networks, and the IEC-61131-3 program, attendees should have a interpreting electrical schemat- Program Standard. basic knowledge of controls. ics. Topics covered include basic This Program is application electrical theory, definitions of Design Example – This session and theory oriented and is ben- common schematic symbols and puts it all together by presenting eficial to anyone who needs to their usage, and schematic nota- a step-by-step example of how-to understand the basics of lift sta- design a typical, small, circular tion controls, controls applica- tion standards. Techniques for wet well pump station. tions, and controls troubleshoot- troubleshooting a control system ing. The individual presentations using the electrical schematic pre- sented. Grinder Pumps In Pressure provide essential technical infor- Sewers – A primer to raise mation, address practical user the awareness and describe the concerns, describe common trou- Enclosure Solutions That Factor in the Environment advantages of these products and bleshooting issues and the tools – This session highlights many to report on how they are used. available to solve those issues in enclosure solutions Attendees control systems already installed may not have thought of before Case Histories – During this as well as updates to existing but after participating in this ses- systems and planned new sys- session, representatives from sion, will help be better prepared tems and feature demonstrations, SWPA member pump and com- to select the best enclosure at the hands-on problem-solving and ponent manufacturer member best price for the application and companies – the industry’s leaders start-up procedures. environment required. – describe particularly challeng- Attendees learn about State-of- ing or unusual installations. the Art Control Systems and con- Motors, Motor Starting trol considerations to give water Options and Motor Annual Controls Training and wastewater operators and Protection Alternatives – Seminar – SWPA introduced its engineers total command over This session begins with an over- Second Annual educational and their systems that was unimagina- view that helps Attendees under- training program – A Controls ble only a few short years ago. stand AC motors and AC motor 20 SWPA operations and teaches them applications, the interconnectiv- sive experience and wide-rang- how to evaluate motor ratings, ity required, and the benefits of a ing expertise. SWPA Technical including efficiency, power factor, consistent control platform, across Resources are provided and torque, etc. Other important motor the water system enterprise. there’s a special Media Area. and motor-related covered include motor compatibility with controls, Dedicated Pump Controllers CEU Credits are Available motor starting options and motor – This session begins with – SWPA issues certificates to protection. an explanation of the term Attendees at its Annual Pumping “Dedicated Controllers” and then Systems and Controls Training goes on to address selection crite- Variable Frequency Drives Seminar for completion of the ria and discusses advantages and (VFDS) with Submersible course for submission to their Pumps – Its all about energy ... disadvantages of using a dedi- respective state agencies for CEU and so much more. Learn how cated pump controller. credits. submersible pumps, like most pumps, are being controlled Pump Station Managers, Technical Resources are from VFDs which serve multiple Communications and SCADA Included – Included in the reg- purposes for most applications – This session is divided into including speed regulation and three distinct sections: The first istration fees for SWPA’s two help eliminate or reduce inrush focuses on the key characteristics Annual Training Seminars are current which helps save energy. of a pump station manager and copies of the Associations’ appli- This session also teaches how when to use these types of con- cable Technical Resources AND today’s VFDs are getting smarter trollers. an a comprehensive Attendee then ever before in that they can During the second section, we Book with Session Summaries, offer application specific func- discuss the various types of com- Speaker Biographies and contact tions, including constant pres- munications to a pump station information, their PowerPoint sure or constant flow control and control system. The final segment Presentations, and other Industry pumping protection. presents an overview of the key information and information components of a SCADA system. about the Association. Types of Controls/Control Devices – This session reviews Start-Up and Tuning a Station Special Media Area Offered and describes devices used inside – This is a wrap-up session that – There is also a special “Media control panels as well as external addresses mechanical and elec- Area” at each of SWPA’s Semi- trical issues such as generator devices, types of controls includ- Annual Training Seminars where testing, the pump end, level meas- ing components typically found SWPA’s Pump Manufacturers and urement, starter types, tuning to in control panels such as phase Component Parts and Accessory minimizing starts and stops and monitors, alternators, electron- Manufacturers display their forcing alternatives, the required ics, etc. and their application plus products and provide complimen- troubleshooting approaches and paperwork for starting and/or tun- tary product literature and other troubleshooting techniques for ing a station, and related issues. resource information related to these controls and control devises. As a reference tool, Attendees receive a complimentary copy of the programs’ contents. Programmable Logic SWPA’s Startup & Field Check- In another expansion of its edu- Controllers (PLC) and Their Out Procedures Manual for cational and training programs in Applications – Building a Submersible Sewage Lift Stations. control architecture on a stable As a result of previous years’ support of "The Systems platform that can be scaled to the success, SWPA has combined Approach," SWPA has expanded application requirements is criti- both programs into a semi- its partnership with Pumps & cal in Life Cycle Cost manage- annual, multi-day forum – Systems Magazine and created the ment, reliability, maintainability, Attendees hear and interact with SWPA Training Resource Center and overall system viability. numerous experts and their peers (TRC). The SWPA TRC is an This session also covers key in the same place, at the same on-line/on demand technical areas of PLC/Process Control time, and tap into their exten- resource that includes video Users’ and Specifiers’ Guide 21 curriculum on such Important these 30 min. to 1-hour training Articles, Case Studies, SWPA Industry topics as: The Systems webinars, complete with Q&A Manuals, Handbooks and more. Approach to Lift Station Design, at the end and the ability to send Operation & Maintenance, SWPA additional questions free of Grinder Pumps & Pressure charge. Non-members will pay a Sewers,Variable Frequency fee. Once a course is completed, Drives (VFD's), Pump System SWPA will issue a Certificate of Optimization, Cavitation and Completion, which you may sub- Air Entrainment — an advanced mit to your local governing body course, SCADA — an advanced for CEU/PDH Credits. course, Motors, Valves, Safety and Enclosures, Controls 101, and The SWPA TRC site also includes more. SWPA members can view Industry News and Technical

Registration Form

Complete and Return this form and we’ll add you to our distribution list to receive information about SWPA’s upcoming Training Seminars and other Events as well as notices about new Technical Publications and special offers for existing publications. Name______Title ______

Company______

Address ______City______State______Zip ______

Phone ______Fax ______

E-Mail Address ______

Company Description (Please check the r Rep Organization appropriate box(es)so we can better Serve you: r Systems Packager r End User r Pump Manufacturer r Service Shop r Component Manufacturer r Consulting/Specifying Engineer r Other, please specify ______r Distributor Use this space to tell us about subjects, topics, speakers and other elements you would like to see SWPA include during future Training Seminars, including subject matter for additional future programs:

______

______

______22 SWPA

Standards For Submersible Pump Applications

pproval of an American these pages, contact the individu- National Standard al sponsoring organizations at the Arequires verification by There are a number of addresses and web sites listed on ANSI (the American National National Standards applica- page 24. Standards Institute) that the ble to submersible pump appli- requirements of due process, cations. Many are American Some Other ANSI/HI consensus, and other criteria for National Standards Institute Standards that apply to Rotodynamic (Centrifugal) approval have been met by a (ANSI) documents, published Pumps Include: Standards developer. Consensus by the Hydraulic is established when, in the judg- Institute (HI). ANSI/HI Number/Name of ment of the ANSI Board of Standard: Standards Review, substantial agreement has been reached by 1.1-1.2 – Centrifugal Pumps for ANSI/HI Centrifugal Pump Test Nomenclature and Definitions. directly and materially affected Standard (ANSI/HI 11.6), this interests. 1.3 – Rotodynamic (Centrifugal Standard was initiated by a SWPA Consensus requires that all Pumps for Design and Test Standards Subcommittee, Application. views and objections are consid- ered, and that a concerted effort was processed and approved for 1.4 – Centrifugal Pumps for has been made toward their reso- submittal to ANSI by HI, and is Installation, Operation and lution. The use of an American now accepted and utilized by all Maintenance. National Standard is completely segments of the pump industry. 1.6 – Centrifugal Pump Tests. voluntary. The ANSI Canvas The Standard underwent 5.1-5.6 –Sealless Centrifugal process requires that a Standard be review in accordance with ANSI’s Pumps for Nomenclature, reaffirmed on a five-year cycle. five-year review procedures, and Definitions, application, opera- after 6 years, the updated test tion and Tests. The ANSI/HI Standard for standard was officially issued in 9.1-9.5 -- Pumps – General Submersible Pump Tests 2012. Guidelines for Types, Definitions, (ANSI/HI 11.6-2012) provides Applicatiom, Sound, Measurement valuable information on proce- ANSI/HI 11.6-2001, 2012 and Decontamination. dures for centrifugal submersible Submersible Pump Tests, 9.6.2 – CEntrigugal and Vertical pump performance testing. describes submersible pump tests Pumps for Allowable Nozzle Loads. ANSI/HI 11.6-2001 was and covers terminology and these developed through collaboration types of tests: 9.6.4 – Centrifugal and Vertical Pumps for Vibration Measurement between SWPA and the Hydraulic • Performance test. and Allowable Values. Institute (HI). This Standard was • Hydrostatic test. 9.6.5 – Centrifugal and Vertical created to meet one of the long- • Net Positive Suction Head standing, major challenges in the Pumps for Condition Monitoring. (NPSH) test. wastewater pump industry: the 9.6.7—Effects of Liquid • Submersible motor integrity development and acceptance of a Viscosity on Rotodynamic Pump test test standard written specifically Performance. • Vibration test. for submersible pumps. It was 9.8 – Pump Intake Design. updated in 2012. • Instrumentation. • Model test. 11.2-12.6 –Rotodynamic (Centrifugal) Slurry Pump The Appendix to the Standard ANSI/HI Submersible Pump (Including Slurry Pump Test) Tests primarily apply to tests of presents formulas and examples. centrifugal submersible pumps Factory Mutual (FM) driven by induction motors. For further information about Standards are typically used for Fundamentally based on the this Standard and others listed on explosion proof pumps. Users’ and Specifiers’ Guide 23

Component and Other • mSS SP-96, Guidelines on UL698A. The hazardous locations Standards – There are Terminology for Valves covered by this standard are Class also Standards that apply to and Fittings I, II, III Division I hazardous Component parts and accessories • mSS SP-128 Ductible (classified) locations as defined for submersible pumps and solids- Iron Gate Valves by NEC article 500.The circuit handling lift stations as well as for extensions that go into hazardous • mSS SP-136 Ductible grinder pumps in pressure sewer locations are typically control cir- Iron Swing Check Valves systems and the component parts cuits. This Standard requires the and accessories in those installa- panel to include intrinsically safe Control Panel Standards -- and physical barriers for separa- tions. These include Here’s a brief summary of the pri- tion of the circuits that are going mary Standards and Codes used into the hazardous location. Valve Standards by SWPA Member Control Panel Manufacturers that are applicable NEC Article 500 covers electri- The American Water Works to Industrial Control Panels. Association (AWWA) publishes cal requirements for equipment the following Standards that and wiring for hazardous (classi- UL508A is titled Industrial fied) locations, Class I, II, and III. apply to Valves used in Pumping Control Panels (published by Systems. Underwriter’s Laboratories). The NEC Article 409 is titled • anSI/AWWA C504-06, requirements in this Standard Industrial Control Panels and con- Rubber-Seated Butterfly cover industrial control panels tains requirements for industrial Valves intended for a variety of uses. control panels for general use. It covers panels intended to be • anSI/AWWA C507-05, This article does contain refer- installed in ordinary (non hazard- Ball Valves ences to other applicable NEC ous) locations in accordance with articles. For example article 409 • anSI/AWWA C512-07, Air the National Electric Code (NEC) references article 500 – 505 for Valves (NFPA 70). equipment in Hazardous (classi- • anSI/AWWA C517-05, fied) locations. Eccentric Plug Valves The Canadian Standards cov- ering these same types of panels • anSI/AWWA C518-01, The NEC may require equip- are C22.2 No 14-M95 Industrial Swing Check Valves ment to be listed and labeled. Control Equipment, C22.2 This means that the product must • anSI/AWWA M51, No. 94-M91 Special Purpose be reviewed and approved by an Manual of Practice for Enclosures, and C22.2 73-1953 organization that is acceptable Air Valves Electrically Equipped Machine to the authority having jurisdic- • aSME B16.10, Face-To- Tools and published by the tion and meets other require- Face and End-To-End Canadian Standards Association ments spelled out in the NEC. Dimensions of Valves (CSA). Organizations such as UL, CSA, TUV, ETL and others meet these The Manufacturers Industrial Control Panels requirements. These organizations Standardization Society that are intended to be installed require the listed equipment to (MSS) publishes the following in hazardous locations as defined have a label which identifies the Standard that applies to Valves by the NEC must meet an addi- organization which provided the used in Pumping Systems. tional set of requirements. These approval. requirements are defined in UL • mSS SP-58, Pipe Hangers Standard UL698. A list of the major Standards and Supports Setting Organizations whose • mSS SP-71, Gray Iron Panels that are not installed in a work impacts on SWPA, its mem- Swing Check Valves hazardous location, but have cir- bers and the submersible waste- • mSS SP-92, MSS Valve cuit extensions that go into haz- water pump industry appears on ardous locations, are covered by User Guide the following page: 24 SWPA

Standards Setting Organizations

Listed below are the major standards setting organizations whose work impacts on submersible wastewater pumps, lift stations and their components as well as grinder pumps in pressure sewers for residential and commercial applications and their compo- nent parts and accessories. For additional information on applicable standards, contact these organizations directly.

ASMA – American Society of IEEE – Institute Of Electrical & Mechanical Engineers Electronics Engineers, Inc. Three Park Ave., New York, NY 10016-5990 445 Hoes Lane P.O. Box 1752, Piscataway, NJ 08855-1331 Phone: 212/591-8530 | Fax: 212/591-7196 Phone: 800/678-IEEE (4333) | FAX: 732/981-9667 Web Site: www.asme.org Web Site: www.ieee.org

merican ational ANSI – A N MSS – Manufacturing Standardization Society Standards Institute 127 Park Ave., NE, Vienna, VA 22180 25 W. 43rd Street, 4th Floor, New York, NY 10036 Phone: 703/281-6613 | FAX : 703/281-6671 Phone: 212/642-4980 | FAX: 212/302-1286 Web Site: www.mss-hq.org Web Site: www.ansi.org

NEMA – National Electrical AWWA – American Water Works Manufacturers Association Association 666 West Quincy Avenue, Denver, CO 80235-3098 1300 North 17th Street, Suite 184, Rosslyn, VA 22209 Phone: 303/794-7711 | FAX ; 303/347-0804 Phone: 703/841-3200 | FAX: 703/841-5900 www.awwa.org Web Site: www.nema.org

CSA – Canadian Standards NEC – National Electrical Code Association Published by NFPA – National Fire Protection 178 Rexdale Boulevard, Toronto, Ontario, Canada Association (NFPA) M9W 1R3 P. 0. Box 9101, 1 Batterymarch Park Phone: 416/747-4000 | FAX: 416/747-4149 Qunicy, MA 02269-9101 Web Site: www.csa-intl.org Phone: 617/770-3000 | FAX: 617/770-0700 Conformance to applicable CSA Standards is Web Site: www.nfpa.org required in Canada for virtual all Standards is required to sell in that country NSF International P. O. Box 130140, NSF Building FM – Factory Mutual Research Corporation 789 N. Dixboro, Ann Arbor, MI 48105 1151 Boston-Providence Turnpike, P. 0. Box 9102 Phone: 734/769-8010 | FAX: 734/769-0109 Norwood, MA 02062 Web Site: www.nfs.org Phone: 781/762-4300 | FAX: 781/762-9375 Web Site: www.fmglobal.com UL – Underwriters Laboratories 333 Pfingsten Road, Northbrook, IL 60062 HI – Hydraulic Institute 6 Campus Drive, 1st Floor North, Phone: 847/272-8800 | FAX: 847/272-8129 Parsippany, NJ 07054-3802 Web Site: www.ul.com Phone: 973/267-9700 | FAX: 973/267-9055 Conformance to applicable UL Standards is Web Site: www.pumps.org required in the U. S. for virtually all installation. Users’ and Specifiers’ Guide 25

SWPA’s Technical Resources There are a number of Technical Resources and informational items you can use to learn more about submersible wastewater pumps and the submersible wastewater pump industry; obtain essential information for specifying submersible wastewater pumps, and assist you with the design, installation, and proper operation of submersible wastewater pumping systems and grinder pump stations. The most significant of these resources are published by SWPA and are described on the following pages.

The “Bible” of the industry A must for A distinctive “How To” since 1984…there’s no better understanding and using Guide with explanations reference tool. pressure sewer technology. for personnel in the field.

SWPA’s Current Technical Resources For ordering information, see page 31.

SWPA’S TECHNICAL RESOURCES, described A Glossary of System Terms and a Glossary of below, are based on “The Systems Approach” to the Electrical Terms are included. Design, Construction, Maintenance and Operation Also included is a variety of resource materi- of Lift Stations and Grinder Pump Stations. als, including friction loss tables for various pipe and fitting configurations and SWPA’s Standardized Submersible Sewage Pumping Systems (SWPA) Presentation Format for Pump and Motor Handbook – 4th Edition Characteristics – an evaluation tool that presents the minimum data needed to evaluate using a specific The SWPA Handbook is a landmark publication. pump for a specific application is also included. It presents fundamentals and addresses some of the SWPA Handbook is intended to familiarize and more sophisticated aspects of submersible wastewa- assist those responsible for designing, installing, and ter pump systems and their components. This unique operating lift stations using submersible solids-han- publication presents more than 80 tables, charts, dling pumping systems. It emphasizes the design, diagrams, photographs, and other visuals to greatly installation, and operation of a system of carefully enhance its value. integrated components. 26 SWPA

Here are descriptions of The Chapters, Glossaries – System and electrical terms. Glossaries, and Appendixes Appendixes – Pump and electrical system refer- Fundamentals and Components – Wet wells. ences, including friction loss tables. Types and sizes of stations. Site selection considera- tions. Grinder Pumps in Pressure Sewers Sizing the System – Planning the sewage system. How to size the lift station. Since the early 1970s, pressures sewer systems have been an effective method to move residential Submersible Electric Motors – These unique wastewater through the small diameter pipes of a motors are designed to operate while the pump/ wastewater collection system where other methods motor assembly is fully submerged in liquid. This are less economical and less feasible. chapter addresses features of submersible pumps and This SWPA Technical Resource is a must for important ratings and performance criteria of AC understanding and using pressure sewer technology. Squirrel Cage Induction motors. It describes the use of pressure sewer technology to Selection of Submersible Pumps – Submersible solve challenging wastewater disposal requirements system components. Factors in selecting the right where other methods may be less economically fea- pump. sible or environmentally acceptable. Dry Pit Submersible Pumps – General Extremely low operating and maintenance (O&M) Description; Advantages; Applications; Pump costs have been documented. Data is now available Station Design; Pump Mounting Arrangements; and from a plethora of successful systems -- some in Electrical Design. operation since the early 1970s. By taking advan- tage of the experience which these systems offer, Grinder Pumps and Pressure Sewers a new system can be planned which will provide – Applications. Advantages. Design crite- excellent performance, high reliability, and reason- ria. Equipment. Construction. Operation and able O&M costs. Maintenance. Controls for Submersible Pumps – Power It describes: Supply; Voltages and Phases available and Why?; • The keys to understanding the differences Standby Power Sources; Motor Controllers; Level between conventional gravity sewer systems and Control Systems; Hazardous Area Applications; pressure sewer systems, the piping network and Operation Sequences, Auxiliary Equipment; the reduction of solids size in the wastewater. Auxiliary Equipment; and Grinder Pump Controls. Pressure sewer systems use grinder pumps to Variable Speed Pumping – Basic information. reduce the solids present to particles, which can Considerations and design guidelines about varia- easily be moved through small diameter pipes. ble speed pumping and variable frequency drives. • The use of pressure sewer system technology to Descriptions of each contributing component of the solve challenging sewage disposal requirements variable speed pumping system, how it interacts with where other methods may be less economically other components. Advantages and disadvantages of applying such a design to submersible pumping feasible or environmentally acceptable. equipment. • How the application of grinder pumps and pres- sure sewer systems is a cost-effective, permanent Valves for Pumping Systems – Check valves, answer to allow more sites, existing and new, to shut-off valves and air valves are important for the proper operation and maintenance of submersible have access to a public sewer system. wastewater lift stations. This chapter addresses the complex analysis of system operation and valve Pressure sewer systems using grinder pumps are par- performance characteristics. ticularly useful in new construction of subdivisions and second home communities and in existing com- Mechanical Controls and Components – Valve munities with aging septic tanks. types and uses. Selecting access covers. The problems of aging septic tanks and unsatis- Installation, Start-Up, Operation and factory soil conditions and an increased emphasis Maintenance – Procedures and checklists for instal- on environmental issues can be economically solved lations, start-up, periodic maintenance and trouble- with pressure sewers. Pressure sewers are compat- shooting. ible with other collection system techniques. Users’ and Specifiers’ Guide 27

• A General Description of Grinder Pumps in • Flow Evaluation Using a Watch Displaying Pressure Sewers Seconds • Advantages To Using Pressure Sewer Systems • Performance (Flow and Head) Evaluation Using a • System Design Criteria Watch Displaying Seconds and a Pressure Gauge • Equipment Requirements In addition to the step-by-step procedures to put a • Up Front Planning lift station into service, the Manual also includes: • Installation and Start-Up • A listing of periodic station checks and inspec- • Operations and Maintenance tions; In its Appendix, Grinder Pumps in Pressure • Notes on operation and maintenance, Sewers includes a Pressure Sewer Systems Glossary; • A sample Start-Up Report Form, Grinder Pump definitions, Drawings and Common Terminology; a Basin Installation Reference Guide, • A drawing showing a typical submersible pump and an extensive Bibliography of additional sources station. of information about these products. • SWPA’s Common Terminology for the Components of a Typical Submersible Pump Start-up and Field Check-out Procedures Manual for Submersible Sewage Lift Stations Station; This practical, 28-page Manual includes procedures • Glossaries of System and Electrical Terms. for flow and performance evaluation based on equipment available. • A listing of selected standards setting organiza- Based on field research, SWPA’s Technical tions. Committee determined that a “how to” training guide with an explanation of “here’s why you’re The Very Versatile Submersible – This doing it” for use when starting up a submersible SWPA Training Video discusses some of the ways sewage lift station was needed for personnel in the this proven machine serves pump specifiers and field. This Manual was developed in response to that need. users throughout the world. It is... SWPA’s Start-Up and Field Check-Our • An eight-minute presentation that describes the Procedures Manual for Submersible Sewage Lift versatile submersible as “a finely tuned machine Stations describes different levels of procedures, designed to operate within the liquid being based on equipment typically available to start-up pumped. It moves suspended solids as well as personnel in the field, to be used in conjunction with liquids. The submersible takes little space...oper- the pump manufacturers start-up and check-out doc- ument and Pump Instruction and Operation Manual ates at a high hydraulic efficiency ...and is easily – not in place of it. maintained and serviced.” It presents step-by-step procedures to put a lift • A video training tool aimed at informing the station into service and lists start-up and check-out viewer of the advantages and multiple uses of procedures at three separate levels, based on equip- submersible wastewater pumping equipment. ment available. These are: • Using a Multimeter. Distributors, contractors, specifiers, users, waste- • Using a Multimeter and a Clamp-On Ammeter. water facilities managers, regulatory agencies, stand- • Using a Voltmeter, a Clamp-On Ammeter, and a ards setting organizations, classes at engineering Megommeter. schools, and others interested in learning more about It also presents: submersible wastewater pumps for municipal and • Procedures for flow and performance evaluations industrial applications can use “The Very Versatile were also developed based on equipment availa- Submersible” to provide sound background informa- ble. These procedures are: tion or as a discussion starter. 28 SWPA

Standardized Presentation Format for Pump language, indicating conformance with the SWPA and Motor Characteristics* – SWPA has Standardized Presentation Format. developed a Standardized Presentation Format for Pump and Motor Characteristics for a pump or fam- By using the SWPA Standardized Presentation ily of pumps. Format, pump manufacturers present data in a The required information included in the pres- consistent arrangement so the designer or speci- entation format is the minimum data needed by a fier can make an informed comparison between specifier or designer to adequately evaluate using a different brands or types of equipment. A major specific submersible wastewater pump for a specific component of the presentation format is a series of application. Standardized Pump/Motor Definitions developed SWPA members may use the Association's Logo by the Association. They define the terms that the with the designation “Approved Curve and Data data represent. (Motor characteristics terms are as Format” in conjunction with statements that their defined by NEMA motors and generators No. MGI- performance curve(s) provide a minimum number of 1978, NEC-1990, IEEE Std. 100-1992.) data categories and the minimum design information as recommended by the Association. Pump manu- Common Industry Terminology – As part of its facturers, at their discretion, may include additional Common Terminology Project, SWPA has devel- information. SWPA assumes no responsibility for oped a “Master List” of System and Electrical defi- any other manufacturer claims made relating to the nitions and a series of drawings with call-outs and pump performance curve(s) or for the correctness of accompanying nomenclature related to submersible the information presented. wastewater pumps, submersible wastewater pump The following statement is to be included on any stations, and grinder pump stations: performance curve(s) carrying the SWPA Member • System Terms and Definitions1* Logo. “SWPA Data Categories Presented – Data on 1 this sheet supply design information as the minimum • electrical Terms and Definitions * recommended by the Submersible Wastewater Pump • common Terminology and Definitions of Association (SWPA) and is defined in accordance a Typical Submersible Lift station1* with SWPA’s Standardized Definitions for Pump and • common Terminology and Definitions Motor Characteristics. The accuracy of the data is for a Typical Grinder Pump Station1 the responsibility of (company name).” At the pump manufacturer’s choice, the presen- Press Information Kit about Grinder Pumps in tation may be in a one-page or two-page format, Pressure Sewers* – SWPA’S Press Information including a performance curve(s) and the minimum Kit On Grinder Pumps in Pressure Sewer Systems pump and motor data design as recommended by includes a white paper entitled “A Pressure Sewer SWPA. Overview – A Proven Approach to Moving Each company seeking approval to use the Wastewater from One Point to Another”, a series of “Approved Curve and Data Format” logo, is Frequently Asked Questions (FAQ’s) and answers required to file a formal application which includes about grinder pumps and pressure sewers, and a a Statement of Compliance, attesting that the com- compilation of Grinder Pump Definitions, Drawings, pany’s Chief Engineer or Technical Manager: “Has and Common Terminology. reviewed our performance curve(s) and appropri- Grinder pumps are used to power small diameter ate minimum data as prescribed by SWPA and to pressurized sewer systems in areas where gravity the best of our ability and knowledge all sheets for piping is uneconomical or impractical. Grinder sys- which we are seeking approval to display the SWPA tems work especially well in hilly or rocky terrain. Member Logo are in compliance with the SWPA They sharply reduce construction and equipment recommendations for minimum data to be included costs. and that the data is presented as defined by SWPA’s In fact, grinder pumps make it possible to serve Standardized Pump/Motor Definitions.” many developments and communities in terrain Each application and accompanying curve and where service was previously impractical. data presentation is reviewed by the Association’s Technical Committee to insure that the minimum The White Paper’s Executive Summary begins recommended data and information are included. by saying: “For many years, pressure sewer systems Those that meet the minimum requirements are have been an effective method to move residential then permitted to use the logo and accompanying wastewater through small diameter pipes to collec- Users’ and Specifiers’ Guide 29

tion facilities where other methods are less economi- It includes member company listings by category – cal or less feasible.” Pump Manufacturers, Component Manufacturers, The keys to understanding the differences and Associate Members. Each member company between conventional gravity sewer systems and listing includes the company's main address, phone pressure sewer systems are the piping network and number, fax number, Web Site, Product and Service the reduction of solids size in the wastewater. Codes, as well as sales and technical contact infor- mation for each company with phone numbers and There are 21 FAQs (and answers) that include e-mail addresses. definitions, cost and power explanations, system descriptions, life expectancy and other topics of The SWPA Membership Roster and Product interest to engineers, builders, developers and home- Reference Guide also includes advertising from owners. The definitions and drawings establish a member companies, information about the current common terminology for centrifugal and progressing and planned Technical Resources published by the cavity style grinder pumps. Association, and our unique educational and training programs – all based on “The Systems Approach.” An Introduction to Grinder Pumps in Pressure Sewers* (New) – A generic Training Presentation Additional copies are available upon request from designed to be used as an introduction to pressure SWPA Headquarters or on www.swpa.org. sewer systems to educate engineers, builders, devel- opers, homeowners, young consulting engineers inexperienced in grinder pump systems and system * These items are downloadable from the SWPA Web Site design, industry groups without knowledge of grind- at www.swpa.org er pump systems and others. Submersible Wastewater Pumping Systems 1. SWPA recognizes and acknowledges that there is other Users and Specifiers Guide – A submersible appropriate nomenclature for many of these terms and termi- wastewater lift station Users’ and Specifiers Guide nolog., However, to coordinate and insure the consistency of to SWPA’s manufacturer members and the products terms, terminology and definitions within all SWPA publications they produce and sell and our Associate Members as well as between SWPA publications and accepted Industry and the services they provide. It includes basic Standards and guidelines, the Association uses terms, terminolo- industry information as well as general information gy, and definitions from this “Master List”. about the Association and its programs and services.

SWPA Technical Resources Under Development o expand its publishing efforts to meet ponents and how they interact to produce a system the current, ongoing, and future needs of to create optimum performance, minimum mainte- T the industry it serves, and in accordance nance, and long life. with its strategic initiatives, SWPA is developing new Technical Resources based on “The Systems Visit the SWPA Web Site at www.swpa.org for Approach.” information and special pre-publication offers on Submersible wastewater pump stations contain a these Technical Resources as they near publication. number of complex interdependent components that Submersible Sewage Pumping Systems (SWPA) must be properly matched to each other to ensure Handbook 4th Edition – with over 30,000 copies long, satisfactory and economic life. sold world wide, the 4th Edtion of “The Industry Because of this need, when in print each of these Bible” was released in the fourth quarter of 2012. publications will present fundamentals with an It includes a new chapter on Motors, expanded emphasis on the design, construction, installation, information on the Fundamentals & Components operation and maintenance of a system of carefully to “The Systems Approach,” updated information integrated components. Using this approach will on Selection of Submersible Pumps, a completely assist consulting engineers, specifiers, users, and new chapter on Grinder Pumps in Pressure Sewers, others gain a better understanding of the interaction updated charts, tables and more. Look for a version between the pump, valves, control panels, VFDs, in Spanish coming soon. An e-book version is also basins, mechanical seal materials and other com- available at the Association’s website, www.swpa.org. 30 SWPA

Submersible Sewage Pumping Systems (SWPA) These publications will be tutorial/ guidelines, Handbook – Condensed Edition – A tutori- providing the reader with specific information about al/guideline, based on the Submersible Sewage “What you need to know when specifying, design- Pumping Systems (SWPA) Handbook, 4th Edition ing, constructing, operation and maintaining” the that will serve as an introduction to the design inter-dependent components in a submersible waste- and proper application of submersible wastewater water systems. pumps and the many inter-dependent components They will present fundamentals with an emphasis and accessories that are used in solids-handling lift on the design, construction, installation, operation, stations and grinder pump stations. It promotes an and maintenance of a system of carefully integrated increased understanding of submersible pump design components and will contain technical and special- and the proper application of these products. ized information intended to be used by profession- als who design, install, operate, and maintain sub- System Component Guidelines (separate publica- mersible wastewater pump stations; qualified design tions on major components in a wastewater pumping engineers, professional installers; and others. system) – SWPA initiatives also call for creating a series of publications based on the Association’s Submersible Wastewater Pumping Systems established product codes and “The Systems Manual (Engineering, Applications and Component Approach,” that will be performance based tutorials/ Integration for Use in Submersible Wastewater guidelines for designing, installing, operating, and Pump Stations) – This upcoming SWPA Technical maintaining the major components in a submersible Resource will be a comprehensive manual covering wastewater pumping system. These publications all aspects of a submersible wastewater pumping will provide descriptive information on the compo- system, including the entire design, operation, and nents in the system and how those components inter- maintenance of a lift station and will be based on act with, impact upon, and affect each other, includ- “The Systems Approach.”… and a compilation of ing equipment guidelines, in a standardized format. SWPA’s Technical Resources – including reference Each publication in the series will utilize compo- materials, guidelines, tutorials, training materials, nents of the SWPA Common Terminology Project. and other informational items.

Notes on Operation and Maintenance

egular inspection and preventive maintenance will insure continued, reliable operation of the entire submersible pump station. All stations, pumps, and operating equipment should be inspected at least Ronce a year, and more frequently under severe operating conditions. All equipment in the station should be backed by manufacturers’ service manuals. This material should be carefully read and filed and should be consulted whenever servicing is required. In conducting regular inspections and preventative maintenance, be sure to follow the manufacturer's recommendations (pump, control panels, valves, etc.). Note and read all safety precautions before performing any operation or maintenance procedure and take appropriate safety precautions to minimize the risk of accidents in connection with any service work. Before starting work, make sure the pump and the control panel are isolated from the power supply and that neither can be energized. Like all products using electrical current, submersible wastewater pumps can result in harm if not used with extreme caution and in strict accordance with the manufacturer’s instructions and in accordance with local building codes and ordinances. For additional information on Operation and Maintenance, including: A “Trouble Checklist” of com- mon problems and their probable causes, Safety Precautions and Recommended Inspections consult Submersible Sewage Pumping Systems (SWPA) Handbook – 4th Edition. Users’ and Specifiers’ Guide 31

SWPA Technical Resources Order Form (You may also order online @ www.swpa.org)

Discounts are available for non-member orders of 25 or more copies and to Educational Institutions for any SWPA Technical Resource. For information on these discounted prices, contact SWPA Headquarters.

Return this completed order form, along with your check or credit card information to: Submersible Wastewater Pump Association 350 North LaSalle Street, 9th Floor • Chicago, IL 60654 For information, call (847.681.1868) • FAX (312.475.9022) or E-Mail ([email protected])

Payment in U. S. funds MUST accompany this order. Allow 1 week for delivery.

Send me _____ copy (ies) of the Submersible Sewage Pumping Systems (SWPA) Handbook Fourth Edition @ $36.95 per copy plus $5.00 shipping and handling per copy for U.S. Shipments ($7.00 per copy for Canadian shipments.*) Send me _____ copy (ies) of the Grinder Pumps in Pressure Sewers @ $10.95 per copy plus $4.00 shipping and handling per copy for U.S. Shipments ($6.00 per copy for Canadian shipments.*) Send me _____ copy (ies) of the Start-Up and Field Check-Out Procedures Manual for Submersible Sewage Lift Stations @ $5.00 per copy plus $3.00 shipping and handling per copy for U.S. Shipments ($4.50 per copy for Canadian shipments.*)

* Contact SWPA Headquarters for S&H costs to other destinations. Standard shipments are sent via USPS. Overnight and 2nd Day Air shipping available at an additional charge. Contact SWPA headquarters for details.

Incomplete or incorrect information can delay shipments.

My check for $ is enclosed. For Credit Card Purchases:

Name r Charge my credit card $ Company Type of Card: r Visa r Mastercard r AMEX r Discover Street Address (No P.O. Boxes, Please) Name on Card Address on Card Account City State ZIP City State ZIP Phone (AC ) Account # E-mail Date Exp. Date Security Code To better serve you, please check the appropriate box(es) describing your company: r Consulting Engineer r Service Shop r Component Manufacturer r Other (Please Specify): r Distributor r Systems Packager r User r Rep Organization r Pump Manufacturer r Educational Institution 32 SWPA

Pump Manufacturer Members

SWPA’s Pump Manufacturer Members are manufacturers of submersible wastewater pumps for municipal and industrial applications that can efficiently handle solids.

Crane Pumps & Systems Franklin Electric (Little Giant) 420 Third Street, Piqua, OH 45356 9255 Coverdale Rd., Fort Wayne, IN 46809 Phone: 937/214-5325 n FAX: 937/773-9715 Phone: 888/885-8989 n FAX: 260/827-5654 Web Site: www.cranepumps.com Web Site: www.franklinengineered.com / Products: CP, DP, GP, IP, SH, TP, OP (Sewage www.littlegiant.com Injector and Effluent Pumps), AC, AT, BS, CC, CH, Products: CP, GP, IP, SH, AC, AT, BS, CC, CP, CP, CT, EM, GR, LA, PC, PM, PS, PB, SE, SS, VA, CT, GR, LA, PC, PM, PB, SE, SS, VA, VFD VFD, WW, OO (Liquid Level Controls) Sales Contact: Chris Nelson, Director Sales. Sales Contact: Walt Erndt, VP/GM. 260/827-5491. [email protected] 937/778-3504. FAX: 937/778-5969. Technical Contact: Amy Rainer, Product Manager- [email protected] Engineered Products. 405/440-1403. [email protected] Technical Contact Little Giant: Randy Tucker, Sr. EBARA Business Portfolio Manager, 1651 Cedar Line Drive, Rock Hill, SC 29730 405/440-1347. [email protected] Phone: 803/327-5005 n FAX: 803/327-5097 Web Site: www.pumpsebara.com Products: CP, DP, GP, IP, SH, OP The Gorman Rupp Co. Sales Contact: Wes Haskell, Director of Sales. 600 S. Airport Rd., Mansfield, OH 44903 803/327-5005. [email protected] Phone: 419/755-1011 n FAX: 419/755-1251 Web Site: www.grpumps.com Products: DP, IP, SH, OP (self-priming centrifugal, Environment One Corporation rotary gear), CP, CT, LA 2773 Balltown Road, Niskayuna, NY 12309 Sales Contact: Vince Baldasare, Sales Manager, Phone: 518/346-6161 n FAX: 518/346-6188 Engineered Systems. 419/755-1271. Web Site: www.eone.com/sewer FAX: 419/755.1208. [email protected] Products: GP, CT Technical Contact: Vince Baldasare Sales Contact: Chris Greco, Director of Sales. [email protected] Technical Contact: Clark Henry, VP of Engineering. Goulds Water Technology a Xylem [email protected] Brand 2811 East Bayard Street, Suite A Seneca Falls, NY 13148 Phone: 315/239-2980 n FAX: 315/568-7644 Web Site: www.completewatersystems.com Products: CP, GP, IP, SH, TP, AC, AT, BS, CC, CP, CT, EM, GR, LA, PS, PB, SE, SS, VA, VFD, WW Sales Contact: William Gell, Product Manager, Wastewater. 315/239-7004. [email protected] Technical Contact: Joe Steinberg, Assistant Product Manager, Wastewater. 315/239-2419. [email protected] Users’ and Specifiers’ Guide 33

Grundfos/Water Utility Mody Pumps, Inc. 3905 Enterprise Court 2166 Zeus Ct., Bakersfield, CA 93308 Aurora, IL 60504 Phone: 661/392-7600 n FAX: 661/392-7601 Phone: 630/236-5500 n FAX: 630/236-5511 Web Site: www.modypump.com Web Site: www.grundfos.com Products: AP, CP, DP, GP, IP, SH, TP, OP Products: CP, DP, IP, SH, AC, BS, CC, CP, CT, EM, Sales Contact: Randy Crawford, Director of GR, LA, PM, PB, WW Business Development. Phone: 541/610-4749 Sales Contact: Rob Montengro, Vice President [email protected] Sales. [email protected] Technical Contact: Alex Clemente, Product Design Technical Contact: Russell Smith, Business Engineer. [email protected] Development Manager, Wastewater. 224/500-6388 [email protected] Pentair 5500 Wayzata Blvd., Minneapolis, MN 55416-1261 Homa Pump Technology Phone: 763/545-1730 n FAX: 763/656-5400 Fountain Lake Commerce Park, 390 Birmingham Web Site: www.pentair.com Blvd., Ansonia, CT 06401 Products: AP, AC, BS, CP, DP, GP, IP, SH, TP, OP, Phone: 203/736-8890 n FAX: 203/736-8899 CC, CH, CT, EM, GR, LA, PC, PM, PB, SE, SS, Web Site: www.homapump.com VA, VFD, VW Products: CP, DP, GP, SH, OP, CH, AC, BS, CC, Sales Contact: Jason Goldberg, North America Sales CP, CT, EM, GR, LA, PB, SE, SS, VA Director. 612/244-9842. [email protected] Sales Contact: John Lord, National Sales & Technical Contact: Roger Turley, Senior Director Business Development Manager. Engineering. 612/244-9842. [email protected] [email protected] Technical Contact: Ryan Sura, Senior Application Brian Alexander, Product Marketing Manager. Engineer. [email protected] 262/728-7566. [email protected]

KSB, Inc. Sulzer 4415 Sarellen Road, Richmond, VA 23231 140 Pond View Drive, Meriden, CT 06450 Phone: 804/222-1818 n FAX: 804/226-6961 Phone: 203/238-7000 n FAX: 203/514-4364 Web Site: www.ksb.us.com Web Site: www.sulzer.com Products: AP, CP, DP, GP, IP, SH, TP, O (Mixed Products: AP, CP, DP, GP, IP, SH, AC, BS, CP, CT, Flow Submersible) GR, LA, PC, PM, PB, SE, SS Sales Contact: Sherry Heinly, North America Sales Contacts: Robert Wright, National Region Marketing Manager, Ext. 8353 Distribution Manager. 203/443-3786 [email protected] [email protected] Technical Contacts: Andre Saravalli, Product Technical Contact: Chris Olofsson, Product & Manager, [email protected]. Aftermarket Engineering Manager. 203/514-4294 Luis Maturana, Vice President of Water and [email protected] Wastewater. [email protected]

Vaughan Company, Inc. Liberty Pumps, Inc. 364 Monte Elma Road, Montesano, WA 98563 7000 Apple Tree Avenue, Bergen, NY USA 14416 Phone: 360/249-4042 n FAX: 360/249-6155 Phone: 800/543-2550 n FAX: 585/494-1839 Web Site: www.chopperpumps.com Web Site: www.libertypumps.com Products: CP, DP, IP, SH, OP, AC, CP, CT, EM, GR, Products: CP, GP, SH, OP, AC, AT, BS, CP, CT, GR, LA, PC, VFD LA, PB, SH, WW Sales Contact: Stephanie Vaughan. Ext. 227. Sales Contacts: Paul Lahr, National Sales Manager [email protected] Engineered Products. [email protected] Randall Waldron, VP of Sales and Marketing. [email protected]. Jeff Goodenbery, Technical Customer Service Supv. [email protected] Dave Williams, Director of Engineering [email protected] 34 SWPA

Weil Pump, A Wilo Company Xylem Flygt Products W57 N14363 Doerr Way, P.O. Box 887 14124 South Bridge Circle, Charlotte, NC 28273 Cedarburg, WI 53012 Phone: 704/409-9750 n FAX: 704/409-9800 Phone: 262/377-1399 n FAX: 262/377-0515 Web Site: http://www.flygt.com/en-us or www. Web Site: www.weilpump.com xyleminc.com/us Products: CP, DP, GP, IP, SH, AC, AT, BS, CC, CP, Products: AP, CP, DP, GP, IP, SH, TP, OP CT, EM, GR, LA, PM, SE, SS, VA, VFD, WW (Choppers) AC, BS, CC, CP, CT, GR, LA, PM, PB, Sales Contact: Doug James, Sales Manager. SS, VA, VFD, WW 262/377-1399. [email protected] Sales Contacts: Julia Beilsmith, Market Manager. Technical Contact: Tim Bade, Technical Sales [email protected] Manager. Kristel Zaman, Senior Marketing Manager. 262/377-1399. [email protected] [email protected]

WILO USA LLC Zoeller Engineered Products 9550 W. Higgins Rd., Suite 300 3649 Cane Run Road, Louisville, KY 40211-1961 n Rosemont, IL 60018 Phone: 800/928-7867 FAX: 502/774-3624 Phone: 888/945-6872 n FAX: 888/945-6873 Web Site: www.zoellerengineered.com Web Site: www.wilo-usa.com Products: CP, DP, GP, SH, AC, AT, BS, CT, GR, LA, Products: CP, DP, GP, IP, SH, OP, CP, CT, EM, VA, PB, PS, SS, VA, WW VFD Sales Contact: Deron Oberkorn, Product Line Sales Contact: Joe Jackson, Director of Sales. Manager. Ext. 8258. [email protected] 801-699-6004. [email protected] Technical Contact: Steve Doolittle, Product Technical Contact: Nick Morris, Application Sales Marketing Manager. Ext. 8215. [email protected] Engineering Manager. 229-584-0244. [email protected]

Periodic Station Checks and Inspections

eekly station checks should be performed and data recorded in the Station Log Book. Certain visual inspections should be made, amperage readings should be taken and recorded, and megohmmeter Wchecks should be made. It is recommended that a Station Log Book be created to record and maintain this data, based on the needs and specifics of the individual station. There is no universally accepted format for a Station Log Book and no pre-formatted forms for recording station data. Whatever format is used, it is recommended that the Station Log Book be kept at the station in the control panel. A daily planner type book, available in most office supply stores, offers an ideal format for a Station Log Book. For most stations, a standard, wirebound book, 4-7/8” x 8” page size, dated for a full year, with one weekday per page, Saturday and Sunday combined, is sufficient. This format and size is ideal to use for recording station information and maintaining a record of periodic maintenance done on the station. The lined format allows space for comments about the station’s operation which need to be noted. This might not be easily accomplished on a pre-formatted form. The value of the Station Log is in consistently uti- lizing the book and noting all important information so it can be used for analysis and comparison. Users’ and Specifiers’ Guide 35

Typical Submersible Pump Station 36 SWPA

Component Manufacturer Members

Component Manufacturer Members are manufacturers of component parts and accessory items for submersible wastewater pumps and systems utilizing such pumps.

Chesterton Ohio Electrical Control, Inc. 860 Salem Street, Groveland, MA 01834 2395 Rock Rd., Ashland, OH 44805 Phone: 978/469-6326 Phone: 419/289-1553 n FAX: 419/289-5555 Web Site: www.chesterton.com Web Site: www.oecinc.net Sales Contact: John Sousa, OEM Business Products: AT, CP, CT, LA, PC, PM, SS, VFD, OO Development Manager – Central U.S. Sales Contact: Bob McMullen, President. 978/764-8757. [email protected] [email protected] Jennay Cacchio, Vice President. 419/289-1553. [email protected] Conery Mfg. Inc. Technical Contact: Dave Baker, Engineering 1380 Enterprise Parkway, Ashland, OH 44805 Manager. 419/289-1553. [email protected] Phone: 419/289-1444 n FAX: 419/281-0366 Sales: Leslie Blankenship, Vice President. Web Site: www.conerymfg.com [email protected] Products: GR, LA Sales Contact: Tim Swaisgood, General Manager. [email protected] SJE Rhombus Chris Shafer, Vice President 22650 County Highway 6, P.O. Box 1708 [email protected] Detroit Lakes, MN 56502 Phone: 888/434-5753 n FAX: 218/847-4617 Web Site: www.sjerhombus.com Flomatic Corporation Products: AT, CP, CT, LA, PC, PM, SS, VFD 15 Pruyn’s Island Drive, Glens Falls, NY 12801 Sales & Technical Support: Jeremy Drinkwine, Phone: 518/761-9797 n FAX: 518/761-9798 Custom Panel Business Development. Web Site: www.flomatic.com Office: 218/847-1317 Ext. 3345, Cell: 218/850-2491 Products: VA [email protected] Sales Contact: Nick Farrara, Vice President of Sales. 518/761-9797, Ext. 204. FAX: 518/761-9798. [email protected] Rockwell Automation, Inc. Technical Contact: Brian Allen, Design Engineer. 1201 South Second St., Milwaukee, WI 53204 518/761-9797, Ext. 238. FAX: 518/761-9798. Phone: 414/382-2000 [email protected] Web Site: www.rockwellautomation.com/ industries/water Products: CP, CT, VFD Motor Protection Electronics (MPE) Sales Contact: Christa Bankay, Commercial Project 2464 Vulcan Road, Apopka, FL 32703 Manager. 519/244-5320. [email protected] Phone: 407/299-3825 n FAX: 407/294-9435 Technical Contact: Kelvin Hurdle, W/WW Web Site: www.mpelectronics.com Industrial Manager. 602/697-7372 Products: AT, CP, LA, PM [email protected] Sales Contact: John Evans, President. [email protected] Technical Contact: Chris Parker, Engineering [email protected] Users’ and Specifiers’ Guide 37

Schneider Electric / Square D Val-Matic Valve & Mfg. Corp. 8001 Knightdale Blvd., Knightdale, NC 27545 905 Riverside Drive, Elmhurst, IL 60126 Phone: 919/217-6464 n FAX: 919/266-4460 Phone: 630/941-7600 n FAX: 630/941-8042 Web Site: www.schneider-electric.us/pump Web Site: www.valmatic.com Products: CP, CT, PC, PM, VFD, OO (Variable Products: VA frequency drives, soft starters, motor starters, circuit Sales Contact: Diane Meyer, Marketing Manager. breakers, disconnects, programmable logic con- 630/993-4022. FAX: 630/993-4087 trollers, sensors and other electrical and electronic [email protected] devices used in conjunction with the submersible Technical Contact: Ed Gardner, Account Manager. pump industry.) 630/993-4018. FAX 630/941-8042 Segment Contact: Jack Creamer, Segment Manager- [email protected] Pumping Equipment. 919/949-3018 or [email protected] Sales Contact: Michael Gaza, Business Development Manager-Pumping Equipment. 484/248-0497 or [email protected] Technical Contact: Jo Lockard, Application Development Manager. 919-266-8818 [email protected]

Topp Industries Inc. P.O. Box 420, Highway 25 North Rochester, IN 46975 Phone: 800/ 354-4534 n FAX: 574/223-6106 Web Site: www.toppindustries.com Products: AC, BS, GR, LA, PS, PB, SE, WW, OO (Structural Foam Basins and Prefabricated Lift Stations) Sales Contacts: Ed Kelso, Sales. 574/224-8653. [email protected] Technical Contact: Judy Terry, Engineered Sales and Customer Service. 574/224-8653. [email protected] 38 SWPA

SWPA’s Industry “Community”

WPA created its mined geographic market area or Associate Member cat- industry segment as agreed upon Segory (non-manufactur- SWPA created its Associate between the distributor and the ers) because the Association Member category because the manufacturer(s) they represent. understands that it is in need of Association understands that it is Traditionally, the most profitable balanced input from the entire in need of balanced input relationships are those with exclu- submersible wastewater pumping from the entire submersible sivity of representation. system “community” and that wastewater pumping systems Through strong distribution, a distributors, reps, consulting and “community” and that manufacturer can reach vast mar- specifying engineering firms, ser- non-manufacturers represent a kets armed with the local knowl- vice stations, systems packagers, vitally important segment of edge and other intangibles outlined publishers, and others provid- this “community.” below without in-house overhead ing services related to Industry of a direct sales force. The costs Products* and/or who provide of the sales process is primari- services to users of Industry ly shouldered by the distributor Products represent a vitally community of interest and includ- during the pursuit of the sale, important segment of this "com- ing end-users; to broaden influ- thus allowing the manufacturer munity." ence associated with submersible to invest more heavily in prod- The “community of interest” wastewater pumps; and to bring uct development and production and influence associated with new resources and experience to improvements. these products is much larger than the Association and help achieve Distributors earn sales (and the manufacturers of the pumps a better balance of interest. therefore profits) through the and the component parts and This is of particular importance proper application of their accessories for lift stations and as SWPA develops additional resources which include engi- grinder pump stations. Standards, industry guidelines, neering principles (mechanical, To continue to be successful in educational training programs, hydraulic, chemical, and elec- today’s rapidly changing business and technical publications in trical), local system knowledge environment, associations like accordance with its strategic ini- (historical as well as predictive), SWPA need broad-based input tiative to promote “The Systems successful relationships (with to make sound decisions and to Approach”. engineers, contractors, owners, ensure that its programs and ser- etc.), and specific product capa- vices meet not only its members’ The Role of the Distributor bilities (by brand, style, etc.). expectations but also market The distributor relies upon expectations. One of the principal players these intangibles (intellectual To assist in promoting the in this “community” is the dis- properties) to secure sales of interests of the entire industry, tributor (or sometimes referred tangible products. In a market Associate Members are invited to as the rep), who plays a vital that seems commodity driven, to serve on SWPA’s committees, role in the application, sale, and wastewater pump sales are still an subcommittees, and working service of submersible wastewater engineered field. groups where their knowledge, pumps. expertise, and input are vital in Distributors don’t manufac- creating balanced educational and ture pumps and they may or may training products. not install pumps, but their role * For membership purposes, Their participation in these is nonetheless a vital one in our SWPA defines Industry Products as: programs and activities broadens market. It is the responsibility of Industry Products are defined as sub- SWPA’s perspective of to the full the distributor to sell pumps and mersible wastewater pumps that can submersible wastewater pump (end users, installer, etc.). efficiently handle solids. industry supply chain, the Distributors target a predeter- Users’ and Specifiers’ Guide 39

Associate Member Listings

Associate Members are non-manufacturers providing services related to Industry Products and/or who provide services to users of industry products.

Allen’s Electrical & Plumbing CDM Smith 225 JC Cannady Rd., Statesboro, GA 30458 One Cambridge Place, 50 Hampshire Street, Phone: 912/764-9975 n FAX: 912/681-2970 Cambridge, MA 02139 Company Description: O Phone: 617/452-6000 n FAX: 617/452-8000 Sales Contact: Barney Allen, Jr. Owner. Web Site: www.cdmsmith.com [email protected] Services: CE Technical Contact: Ernie Sturtz, P.E., BCEE 850/386-9507. [email protected] B&M Technical Services, Inc. 364 Industrial Drive, P.O. Box 48 Coloma, WI 54930 Pete Duty & Associates, Inc. Phone: 715/228-7604 n FAX: 715/228-3418 1121 Drayton Street, Newberry, SC 29108 Web Site: www.bmtechservice.com Phone: 864/918-1619 Company Description: REP, SVSTA, SYSTP Company Description: DIST Sales/Technical Contact: Phil Gruber, President. Sales/Technical Contact: Chris Caldwell. 608/547-2407. [email protected] 964/918-1619. [email protected]

Blake Equipment Co., Inc. Empowering Pumps & Equipment – 4 New Park Road, East Windsor, CT 06088 Digital Media Marketing Phone: 860/218-1006 n FAX: 860/243-3996 2205 – C 7th Street Web Site: www.blakeequip.com Tuscaloosa, AL 35406 Company Description: DIST, SVSTA, SYSTP Phone: 205/391-8422 Sales and Technical Contact: Robert Klybas, Vice Web Site: www.empoweringpumps.com President. [email protected] Company Description: (Services) Digital Marketing Christine Russo, Sales & Manufacturing. Media for Industrial Companies 860/218-1006. [email protected] Sales & Technical Contact: Charli K. Matthews, CEO & Founder. 205/391-8422. [email protected] Brown & Caldwell 1600 Duke St., Suite 310, Alexandria, VA 22314 Phone: 703/739-4212 n FAX: 860/528-8057 Engineered Equipment Sales Web Site: www.brwncald.com 1814 South Third Street, St. Louis MO 63104 Company Description: CE Phone: 314/646-0074 n FAX: 314/646-0078 Contact: Jay Kirk 703/340-1074. Company Description: REP [email protected] Sales Contact: Michael D. Busse, President

Burns & McDonnell G.A. Fleet Associates 3650 Mansell Rd., Suite 300, Alpharetta, GA 30022 55 Calvert St., Harrison, NY 10528 Phone: 770/510-4541 n FAX: 770/587-4772 Phone: 914/835-4000 n FAX: 914/381-7931 Web Site: www.burnsmcd.com Web Site: www.gafleet.com Products: CE Company Description: REP, DIST, SYSTP, SVSTA, O Sales Contact: Matt Bracewell, Regional Manager Sales Contact: Cinar Akman, Associate. Water. 770-510-4541. [email protected] 914/-381-7939. [email protected] 40 SWPA

Gannett Fleming, Inc. Precision Pump & Valve Service, Inc. 207 Senate Ave., Camp Hill, PA 17011 P. O. Box 7027, 517 Old Goff Mountain Road, Phone: 717/763-7211 n FAX: 717/763-8150 Charleston, WV 25356 Web Site: www.gfnet.com Phone: 304/776-1710 n FAX: 304/776-0303 Company Description: CE Web Site: www.ppvs.com Sales Contact: David Gryger, Project Engineer. Company Description: DIST, SERV 717/763-7212 Ext. 2054. Sales Contact: James Landfried, Municipal Sales. [email protected] [email protected] Technical Contact: Tim Glessner Technical Contact: James Lawson, Sales 717/763-7212 EXT 2673. [email protected] Engineering. [email protected]

Harmon & Co., Inc. Preferred Sources, Inc. 195 White Oak Hill Rd., Poland, ME 04274 930 Culp Rd., Pineville, NC 28134 Phone: 207/998-8100 n FAX: 207/998-2484 Phone: 704/504-3111 n FAX: 704/504-3499 Company Description: REP Company Description: REP, SVSTA, SYSTP Sales Contact: Greg Harmon, President. Sales Contact: Scott Taylor, Sales Manager. 207/998-8100. [email protected] 980/721-4872. [email protected] Technical Contact: Josh Amon, Vice President. 704/504-3111, Ext. 200. Metropolitan Industries, Inc. [email protected] 37 Forestwood Drive, Romeoville, IL 60446-1343 Phone: 815/886-9200 Web Site: www.metropolitanind.com Pumps & Systems Magazine Contact: Tim Merkel. 419/979-9069 1900 28th Avenue South, Birmingham, AL 35209 [email protected] Phone: 205/212-9402 n FAX: 205/314-8272 Web Site: www.pumpsandsystems.com Company Description: magazine, website, podcasts, Metropolitan Water Reclamation enewsletters, webinars, eblasts, content marketing District of Greater Chicago Sales Contact: Derrell Moody, Account Executive (MWRD) [email protected] 111 E Erie St., Chicago, IL 60611 Editorial Contact: Alecia Archibald, Senior Editor. Phone: 704/504-3111 n FAX: 704/504-3499 [email protected] Web Site: www.mwrd.org Company Description: Water Reclamation District Engineering Contact: Brett Garelli Smith Pump Company, Inc. [email protected] 301 M & B Industrial, Waco, TX 76712 Phone: 254/776-0377 n FAX: 254/776-0023 Web Site: www.smithpump.com Milby Company Company Description: DIST 6201 S. Hanover Rd., Elkridge, MD 21075 Sales and Technical Contact: L. Granger Smith, Phone: 410-796-7700 n FAX: 410/796-7739 President. [email protected] Web Site: www.milbycompany.com Company Description: REP, DIST, SYST, SVSTA, O Sales/Technical Contact: Dan Latta, Development Southeastern Pump Manager. 410/796-7700. [email protected] 1368 SW 12th Avenue, Pompano Beach, FL 33069 Phone: 954/781-8400 or 800/396-4182 FAX: 954/781-8434 Modern Pumping Today Web Site: www.sepump.com 312 Lorna Square, Birmingham, AL 35216 Company Description: DIST, REP, SYST Phone: 205/795-0232 Sales and Technical Contact: John Veerling Web Site: www.modernpumpingtoday.com (M, T), President. Company Description: magazine, website, [email protected] Editorial Contact: Jay Campbell, Editor. [email protected] Users’ and Specifiers’ Guide 41

Technical Sales Corporation Whitney Equipment Company 4621 N. Hale Ave., Tampa, FL 33614 21222 30th Drive SE, Suite 110 Phone: 813/876-9256 n FAX: 813/874-1194 Bothwell, WA 98021 Web Site: www.tsctampa.com Phone: 425/486-9499 n FAX: 425/485-7409 Company Description: DIST, SVSTA, SYST Company Description: DIST, REP, SVSTA, SYSTP Sales Contact: Ben Larsen, President. Sales/Technical Contact: Jason Morse [email protected] 503/310-9893. [email protected]

Charles R. Underwood, Inc. WWEMA 2189 Everett Dowdy Road, Sanford, NC 27330 P.O. Box 17402, Washington, DC 20041 Phone: 919/775-2463 n FAX: 919/708-7232 Company Description: 0 Company Description: CE, DIST, SVSTA Contact: Vanessa Leiby, Executive Director. Sales & Technical Contact: Clay Phillips 703/444-1777. [email protected] 919/775-2463. [email protected]

Watermark Engineered Product Sales, Inc. 17220 Harger Court, Noblesville, IN 46060 Phone: 317/219-4333 n FAX: 317/219-3370 Web Site: www.watermarkeps.com Company Description: REP, SYSTP Sales Contact: Brad Boyer, Owner. 317/219-4324. [email protected] Technical Contact: Joel Warden. 317/219-4325. [email protected]

Users’ and Specifiers’ Guide 43

Advertisers Index

SWPA Member Advertising appears on the following pages in a standardized two-page format. a profile, including, a company description*, sales and technical contact persons and the company’s logo, appears at the top of the left-hand page with advertising on the bottom half of the left-hand page and the full right-hand page.

Conery Manufacturing, Inc...... 44 Crane Pumps & Systems...... 46 EBARA...... 48 Empowering Pumps...... 50 Environment One Corporation...... 52 G.A. Fleet Associates...... 54 Flomatic Corporation...... 56 Xylem Flygt Products...... 58 Franklin Electric Company...... 60 The Gorman Rupp Company...... 62 Goulds Water Technology a Xylem Brand...... 64 Grundfos Water Utility...... 66 Homa...... 68 KSB, Inc...... 70 Liberty Pumps, Inc...... 72 Milby Company...... 74 Mody Pumps, Inc...... 76 Motor Protection Electronics (MPE) ...... 78 Ohio Electric Contol, Inc...... 80 Pentair...... 82 Pumps & Systems Magazine...... 84 Rockwell Automation, Inc...... 86 Schneider Electric/Square D...... 88 SJE Rhombus...... 90 Sulzer...... 92 Topp Industries Inc...... 94 Val-matic Valve & Mfg. Corp...... 96 Vaughan Company, Inc...... 98 Weil Pump, A Wilo Company...... 100 Wilo USA LLC...... 102 Zoeller Engineered Products...... 104

* The individual company descriptions have been supplied by the advertiser. SWPA assumes no liability for the accuracy of any of the statements or claims presented in that information. 44 SWPA

Conery Manufacturing, Inc. 1380 Enterprise Pkwy. Ashland, OH 44805 Phone: 419/289/1444 FAX: 419/281/0366 Web Site: www.conerymfg.com

Products: CP, GR, LA, PM, PS, VA Sales Contact: Tim Swaisgood [email protected]

Conery Manufacturing has been providing quality products for water and wastewater pumping stations for over 38 years. We have built strong customer relationships based upon quality products, quick and accurate shipments, and competitive pricing. From our proven line of float switches to our universal Freeflo Base Elbows, we are ready to provide you with the hardware and information to make your project a success. Find out what makes Conery Manufacturing different. Users’ and Specifiers’ Guide 45 46 SWPA

Crane Pumps & Systems 420 Third Street Piqua, OH 45356 Phone: 937/214-5325 FAX: 937/773-2238 Web Site: www.cranepumps.com

Products: CP, DP, GP, IP, SH, TP, OP (Sewage Injector and Effluent Pumps), AC, AT, BS, CC, CH, CP, CT, EM, GR, LA, PC, PM, PS, SE, SS VA, VFD, WW OO (Liquid Level Controls) Sales Contact: Walt Erndt, VP/GM of Municipal. 937/778-3504. [email protected]

Crane Pumps & Systems is a manufacturer of high quality pumps, systems, accessories and services. With brands you trust, we provide solutions for commercial building, residential building, industrial, municipal and military markets. With over a century of experience CP&S serves the ever changing needs in today’s pumping marketplace. Our commitment to excellence is carried through to the manu- facturing, sales, distribution and service components of our business. Finding solutions and creating better processes make CP&S who we are. Our slogan “Everyone. Everywhere. On time. Every time” fuels our employees to strive to bring the most durable and sustainable pumps to market. Users’ and Specifiers’ Guide 47 48 SWPA

EBARA 1651 Cedar Line Drive Rock Hill, SC 29730 Phone: 803/327-5005 FAX: 803/327-5097 Web Site: http://www.pumpsebara.com

Products: CP, DP, GP, IP, SH, OP Sales/Technical Contact: Wes Haskell, Director of Sales 803/327-5005. [email protected]

Founded in 1912, EBARA Corporation is recognized as a world leader in the design, development and manufacture of industrial machinery with a predominant focus on the production of pumps, pumping systems and compressors.

EBARA Pumps Americas Corporation, a wholly owned subsidary of Ebara Corporation, provides engineered pump, pump products and related services for the water, wastewater, sewage, commercial, building services, industrial, and municipal industries offering reliableproduct knowledge, applica- tion expertise and responsive support including aftermarket replacement parts services throughout North America. EBARA remains the largest single brand pump company in the world and develops high quality, efficient products and key system components for the fields of water supply, energy and environmental issues. Recognizing the continued strain on infrastructures and water and wastewater facilities with increased maintenance, energy, and environmental demands and costs, EBARA strives to deploy the best water, wastewater pumps, products, and technologies to meet these requirements. Users’ and Specifiers’ Guide 49 50 SWPA

Empowering Pumps – Digital Media Marketing 2205 – C 7th Street Tuscalousa, AL 35406 Phone: 205/391-8422 Web Site: www.EmpoweringPumps.com

Products: (Services) Digital media marketing, social media & content marketing, content distribution via website, enewsletters, social media channels, & print magazine For digital media strategy, contact Rebekah Mechtensimer at [email protected] For editorial & content marketing, contact Cieana Detloff at [email protected]

Empowering Pumps & Equipment is THE CONNECTION HUB for the Pump Industry. We Connect, Inform, and Educate the industry through publishing The Right Content, To the Right Audience, At the Right Time! As an Empowering Brands property, we aim to be strategic business partners to our partners, creating tailored programs to support our clients’ marketing campaigns and providing flexible and responsive service. With broad industry knowledge and a respected brand, Empowering Pumps & Equipment provides publishing opportunities, content development, social media marketing, strategy, and distribution options to empower our clients to cost-effectively reach and engage with a diverse audience. Users’ and Specifiers’ Guide 51 52 SWPA

Environment One Corporation 2773 Balltown Road Niskayuna, NY 12309 Phone: 518/346-6161 FAX: 518/346-6188 Web Site: www.eone.com

Products: GP, CT Sales Contact: Chris Greco, Director of Sales [email protected] Technical Contact: Clark Henry, Vice President of Engineering. [email protected]

Low-pressure, gravity-independent, contour-following sewage collection systems were pioneered by Environment One. E/One Sewer® systems have proven to be an economical and effective method of sewering otherwise difficult land areas, such as lakefront property, hilly terrain, very flat land, and areas with high water tables. At the heart of an E/One Sewer is the Grinder Pump, developed by Environment One. These units accept household sanitary waste, grind it into fine slurry, and pressurize it to permit transport through small-diameter pipes. E/One sewer systems serve more than 1 million end-users daily. Users’ and Specifiers’ Guide 53 54 SWPA

G.A. Fleet Associates 55 Calvert Street Harrison, NY 10528 Phone: 914/835-4000 Web Site: www.gafleet.com

Products: REP, DIST, SYSTP, SVSTA, O Sales Contact: Cinar Akman, Associate. 914/-381-7939. FAX: 914-381-7931. [email protected]

GA Fleet Associates serves Building Trades, Municipal, Transit, and After Market clients by providing equipment, systems, direction, and service for their projects. Our staff is comprised of degreed engi- neers, MBAs, and highly trained technicians ready to solve any technical or field problem.

We specialize in plumbing and fire protection pumping systems, the HVAC large pump market, and municipal water and waste pumping systems. We also work with airports and in the subway to facili- tate water drainage, heating and treatment needs.

The Fleet Pump & Service Group is dedicated to aftermarket equipment, with mechanics, technicians, service, parts, rentals, and service contracts. Users’ and Specifiers’ Guide 55 56 SWPA

Flomatic Corporation 15 Pruyn’s Island Drive Glens Falls, NY 12801 Phone: 518/761-9797 FAX: 518/761-9798 Web Site: www.flomatic.com

Products: VA Sales Contact: Nick Farrara, Vice President of Sales. 518/761-9797, Ext. 204. FAX: 518/761-9798. [email protected] Technical Contact: Brian Allen, Design Engineer. 518/761-9797, Ext. 238 FAX: 518/761-9798. [email protected].

Flomatic is the leading worldwide manufacturer of valves — specializing in Air Valves, Automatic Control Valves, Plug Valves, Check and Foot Valves. For more than 80 years we have been changing the industry and leading the market with distinctive patented products. We offer a full line of Check Valves for the water and wastewater market ranging from 1” to 30”. Our products have been installed in a wide variety of applications with excellent results. Flomatic is an ISO 9001 and 14001 certified company with comprehensive manufacturing processes. As always, Flomatic is dedicated to providing their customers with High Quality Valves Built to Last. Users’ and Specifiers’ Guide 57 58 SWPA

Xylem Flygt Products 14125 South Bridge Circle Charlotte, NC 28273 Phone: 704/409-9750 FAX: 704/409-9800 Web Site: http://www.flygt.com/en-us or www.xyleminc.com/us

Products: AP, CP, DB, GP, IP, SH, TP, AC, BS, CC, CH, CP, CT, GR, LA, PM, PB, SS, VA, VFD, WW Sales Contact: Julia Beilsmith, Market Manager [email protected] Kristel Zaman, Senior Manager [email protected]

Xylem’s Flygt brand is the inventor and the world leader in the design, manufacture, and sale of heavy-duty electric submersible solids-handling pumps, axial flow high volume propeller pumps, mix- ers, flow generating equipment and monitoring and control systems. Flygt submersible pump products range in size from 1-hp to beyond 1,000-hp with the ability to handle wastewater and storm water flows to beyond 100,000 gpm per pump. Flygt’s N-Pump delivers sustained high hydraulic efficiency and is the premier innovative solids-handling pump technology in the wastewater industry. The result is the most consistent offering of proven equipment for the widest range of pumping and mixing appli- cations. Visit our website for more information at http://www.flygt.com/en-us. Users’ and Specifiers’ Guide 59 60 SWPA

Franklin Electric 9255 Coverdale Rd. Fort Wayne, IN 46809 Phone: 704/409-9750 FAX: 704/409-9800 Web Sites: www.franklinengineered.com | www.littlegiant.com

Products: CP, GP, IP, SH, AC, AT, BS, CC, CP, CT, GR, LA, PC, PM, PB, SE, SS, VA, VFD Sales Contact: Chris Nelson, Director of Sales 260/827-5491. [email protected] Technical Contact: Amy Rainer, Product Manager-Engineered Products 405/440-1403. [email protected] Technical Contact/Little Giant: Randy Tucker, Sr. Business Portfolio Manager 405/440-1347. [email protected]

FPS Engineered Products: From non-clog and grinder pumps to booster pumps, our dedicated team directs field engineers, architects, and installers down the most efficient path by providing proper siz- ing requirements, affordable quote options, and reliable product solutions. To learn more, visit your distributor or www.franklinengineered.com.

Little Giant Pumps: From water pumps, water systems, HVAC, industrial pumps to on-site water treatment systems, our products’ breadth and depth offermeaningful advantages to residential, light commercial, industrial, and agricultural customers alike. To find out more, visit your distributor or www.littlegiant.com. Users’ and Specifiers’ Guide 61 62 SWPA

The Gorman-Rupp Company 600 S. Airport Rd. Mansfield, OH 44903 Phone: 419/755-1011 FAX: 419/755-1251 Web Site: www.GRpumps.com

Products: CP, DP, IP, SH, OP (self-priming centrifugal, rotary gear), CT, LA, PM Sales/Technical Contact: Vince Baldasare, Sales Manager, Engineered Systems. Phone: 419/755-1271 FAX: 419/755-1208. [email protected]

A world leader in municipal sewage pumping systems. Manufacturing an extensive line of above and below ground packaged pumping systems as well as submersible pumping systems, booster stations, silent pumps, and controls. The pre-engineered systems include pumps, motors, valves, controls, etc. Users’ and Specifiers’ Guide 63 64 SWPA

Goulds Water Technology a Xylem Brand 2881 East Bayard Street Extension Seneca Falls, NY 13148 Phone: 315/568-7123 FAX: 888/322-5877 Web Site: www.goulds.com

Products: CP, GP, IP, SH, TP, AC, AT, BS, CC, CP, CT, EM, GR, LA, PS, PB, SE, SS, VA, VFD, WW Sales Contact: William Gell, Product Manager Wastewater. 315/239-7004. [email protected] Technical Contact: Joe Steinberg, Assistant Product Manager Wastewater. 315/239-2419. [email protected]

Goulds Water Technology is an integral part of Xylem Inc., a global leader in manufacturing pumps for residential, commercial, agricultural and municipal markets. The Goulds product portfolio includes sub- mersible, lineshaft turbine, jet pump, sump, effluent, sewage, centrifugals, VFD drives as well as a full line of accessories for those lines.

Applications include:

Residential and Commercial Wastewater: Sump, effluent, and sewage pumps, complete lift stations, stock and custom control panels and accessories designed for residential applications. Users’ and Specifiers’ Guide 65 66 SWPA

Grundfos Water Utility 3905 Enterprise Court Aurora, IL 60504 Phone: 630/236-6900 FAX: Web Site: www.grundfos.us

Products: CP, GP, IP, SH, TP, AC, AT, BS, CC, CP, CT, EM, GR, LA, PS, PB, SE, SS, VA, VFD, WW Sales Contact: Rob Montenegro, Vice President Sales. [email protected] Technical Contact: Russell Smith, Business Development Manager-Wastewater. [email protected]

Grundfos is an innovative leader in wastewater pumping solutions and provide comprehensive market coverage through a number of marquee product brands, some with roots going back a century or more. Together, Grundfos, Yeomans, Chicago and Morris gives you access to a submersible range of pumps from the smallest grinder pump to the largest flood control stations, and we are leading the way with not only cutting-edge pump designs but all intuitive dedicated control systems. For more information on how Grundfos is “BRINGING IT ALL TOGETHER” in pump design please visit www.grundfos.us. Users’ and Specifiers’ Guide 67 68 SWPA

Homa Pump Technology Fountain Lake Commerce Park, 390 Birmingham Blvd. Ansonia, CT 06401 Phone: 203/736-8890 FAX: 203/736-8899 Web Site: www.homapump.com

Products: CP, DP, GP, SH, OP, AC, BS, CC, CH, CP, CT, EM, GR, LA, PB, SE, SS, VA Sales Contact: John Lord, National Sales & Business Development Manager. [email protected] Technical Contact: Ryan Sura, Senior Application Engineer. [email protected] Users’ and Specifiers’ Guide 69 70 SWPA

KSB, Inc. 4415 Sarellen Road Henrico, VA 23231 Phone: 804/222-1818 FAX: 804/226-6961 Web Site: www.ksb.us.com

Products: AP, CP, DP, GP, IP, SH, TP, O (Submersible Pumps and Mixers) Sales Contact: Sherry Heinly, North America Region Marketing Manager – [email protected] Technical Contacts: Andre Saravalli, Product Manager – [email protected] Luis Maturana, Vice President of Water & Wastewater – [email protected]

KSB, Inc., a subsidiary of KSB AG, brings to the U.S. more than 140 years of global experience and competence of centrifugal pump technology that is designed for optimum reliability and maximized performance. KSB, Inc. supplies quality water and wastewater pumps and mixers, i.e. submersible non-clog sewage, mixed flow, conventional dry pit sewage pumps and submersible mixers. In addi- tion to maintaining manufacturing, testing and repair facilities within the company’s headquarters in Richmond, VA, KSB is backed by an established network of sales and service locations to meet cus- tomers’ needs. KSB continues to increase presence with products and services throughout the U.S. to meet customers’ demands. Like us on Facebook and follow us on LinkedIn and Twitter. Visit our web site at www.ksb.us.com. Users’ and Specifiers’ Guide 71 72 SWPA

Liberty Pumps, Inc. 7000 Apple Tree Avenue Bergen, NY 14416 Phone: 800/543-2550 FAX: 585/494-1839 Web Site: www.libertypumps.com

Products: CP, GP, SH, OP, AC, AT, BS, CP, CT, GR, LA, PB, SH, WW Sales Contacts: Paul Lahr, National Sales Manager Engineered Products – [email protected] Randall Waldron, VP of Sales and Marketing – [email protected]. Jeff Goodenbery, Technical Customer Service Supv. – [email protected] Dave Williams, Director of Engineering – [email protected]

Headquartered in Bergen, NY, Liberty Pumps is a leading U.S. manufacturer of pumping products for ground water and wastewater removal in residential and commercial applications. With a focus on inno- vative product design, our wide range of pump styles includes sump pumps, sewage pumps, effluent pumps, drain pumps, grinder pumps, complete pre-assembled sewage packages, and pump accessories. Users’ and Specifiers’ Guide 73 74 SWPA

Milby Company 6201 S. Hanover Rd. Elkridge, MD 21075 Phone: 410/796-7700 FAX: 410/796-7739 Web Site: www.milbycompany.com

Products: REP, DIST, SYSTP, SVSTA, O Sales/Technical Contact: Dan Latta, Development Manager. 410-796-7700 [email protected]

Founded in 1932, Milby Company is the oldest, longest running company serving the water and waste- water industries in the Mid-Atlantic region. 75 SWPA 76 SWPA

Mody Pumps, Inc. 2166 Zeus Ct. Bakersfield, CA 93308 Phone: 661/392-7600 FAX: 661/392-7601 Web Site: www.modypump.com

Products: AP, CP, DP, GP, IP, SH, TP, OP (Submersible Pumps and Mixers) Sales Contact: Randy Crawford, Director Business Development. 541/610-4749 [email protected] Technical Contact: Alex Clemente, Product Design Engineer [email protected]

Mody Pumps®, Inc. is one of the fastest growing submersible pump manufacturers worldwide. We draw from almost half a century of experience in the submersible pump industry to deliver products that embody superior quality, reliability, peerless customer service and solid after-sales support. We serve the dewatering, municipal, industrial, marine, rental and waste management markets by offering a complete range of dewatering pumps and a full line of wastewater and sewage pumps. Users’ and Specifiers’ Guide 77 78 SWPA

Motor Protection Electronics (MPE) 2464 Vulcan Road Apopka, FL 32703 Phone: 407/299-3825 FAX: 407/294-9435 Web Site: www.mpelectronics.com

Products: AT, CP, LA, PM Sales Contact: John Evans, President [email protected] Technical Contact: Chris Parker, Engineering [email protected]

Motor Protection Electronics is a leader in the design and manufacturing of Industrial Controls. Founded in 1983, our philosophy is to manufacture Controls and Controllers that are easy to use. We offer a full line of Industrial Controls for the Water and Wastewater industry, along with excellent cus- tomer service, technical support, and product availability. Users’ and Specifiers’ Guide 79 80 SWPA

Ohio Electrical Control, Inc. 2395 Rock Road Ashland, OH 44805 Phone: 419/289-1553 FAX: 419/289-5555 Web Site: www.oecinc.net

Products: AT, CP, CT, LA, PC, PM, SS, VFD, OO Sales Contacts: Bob McMullen, President. [email protected] Jennay Cacchio, Vice President. 419/289-1553. [email protected] Leslie Blankenship, Vice President. [email protected] Technical Contact: Dave Baker, Engineering Manager. 419/289-1553 [email protected]

Ohio Electrical Control is ready to serve your control panel needs with our state-of-the-art 20,000 square-foot manufacturing facility. We are proud to have a full metal fabrication shop on site to make any modifications or to engineer any part needed to fulfill your order. OEC is a UL, CUL, and CSA Certified shop. We can build control panels to the UL508A and UL698A standards. Ohio Electric Control has a strong reputation in the water treatment industry. We are forging new relationships with industrial customers and currently forming a division which focuses on OEM controls. Our engineering staff is always ready to quote custom panels to meet your control needs. Users’ and Specifiers’ Guide 81 82 SWPA

Pentair 5500 Wayzata Blvd, Suite 600 Minneapolis, MN 55416-1261 Phone: 763/545-1730 FAX: 763/656-5400 Web Site: www.Pentair.com

Products: AP, AC, BS, CH, CP, DP, GP, IP, SH, TP, OP, CC, CT, EM, GR, LA, PC, PM, PB, SE, SS, VA, VFD, WW Sales Contact: Jason Goldberg, North America Sales Director. 437/922-2247. [email protected] Technical Assistance: Roger Turley, Senior Director of Engineering. 612/244-9842. [email protected] Sr. Product Marketing Manager: Brian Alexander. 262/728-7566 [email protected]

Pentair’s Fairbanks Nijhuis line offers world-class custom engineered solutions for the global pump- ing industry. Offering complete system solutions, Fairbanks Nijhuis globally serves the Infrastructure, Industrial, Irrigation, Oil & Gas and Fire Protection markets. Pentair’s Hydromatic line of wastewa- ter pumps include submersible grinders, solids handling and self-primers for the municipal, industrial, commercial and residential markets. Pentair’s Myers line represents one of the most diversified lines of submersible sump, sewage, effluent, grinder, solids handling and reciprocating pumps for the munici- pal, industrial, commercial and residential markets. Users’ and Specifiers’ Guide 83 84 SWPA

Pumps & Systems Magazine 1900 28th Avenue South Birmingham, AL 35209 Phone: 205/212-9402 FAX: 205/314-8272 Web Site: www.pumpsandsystems.com

Products: magazine, website, enewsletters, webinars, eblasts, content marketing, podcasts Sales Contact: Derrell Moody, Account Executive [email protected] Editorial Contact: Alecia Archibald, Senior Editor [email protected]

Since 1993 Pumps & Systems has provided the most comprehensive coverage of the pump industry to end-users worldwide. Our monthly magazine and digital edition connect 46,000 qualified, BPA-audited subscribers with technical solutions and informative case studies. The total monthly P&S audience has grown to more than 180,000, thanks to our active website and popular enewsletters. The introduction of content marketing services and a weekly podcast are examples our ongoing response to industry needs and trends. Additionally, our educational webinar program provides an average of more than 500 high-quality leads for sponsors. Users’ and Specifiers’ Guide 85 86 SWPA

Rockwell Automation, Inc. 1201 South Second Street Milwaukee, Wisconsin 53204 Phone: 414-382-2000 Web Site: www.rockwellautomation.com/industries/water

Products: CP, CT, VFD Architecture & Software This segment contains key elements of the Rockwell Automation control and information platforms, software applications and automation components. Control Products & Solutions This segment consists of motor control products, solutions and services. Sales Contact: Christa Bankay, Commercial Program Manager. 519/244-5320 [email protected] Technical Contact: Kelvin Hurdle, W/WW Industrial Manager. 602/697-7372. [email protected]

Rockwell Automation, Inc., the world’s largest company dedicated to industrial automation and infor- mation solutions, helps make its customers more productive and the world more sustainable.

The PlantPAx™ Process Automation System leverages the core Integrated Architecture™ technologies and custom solutions for plant-wide control. Combined with intelligent motor control, PlantPAx can help you to reduce downtime, increase productivity, reduce energy use and improve safety. Predict and prevent maintenance issues, boost performance and protect your assets with process automation control from Rockwell Automation. Users’ and Specifiers’ Guide 87 88 SWPA

Schneider Electric/Square D 8001 Knightdale Boulevard Knightdale, NC 27545 Web Site: www.schneider-electric.us/pump

Products: CO, CT, PC, PM, VFD, OO (Variable frequency drives, soft starters, motor starters, cir- cuit breakers, disconnects, programmable logic controllers, sensors and other electrical and electronic devices used in conjunction with the submersible pump industry.) Segment Contact: Jack Creamer, Segment Manager–Pumping Equipment. 919/949-3018 or [email protected] Sales Contact: Michael Gaza, Business Development Manager–Pumping Equipment. 484/248-0497 or [email protected] Technical Contact: Jo Lockard, Application Development Manager. 919-266-8818 or [email protected]

Schneider Electric: Your partner for efficient, connected smart pumping solutions

From the most basic application to the most complex project, Schneider Electric is committed to your success in the pumping marketplace. To meet the challenges in today’s complex market, you need more than an equipment supplier — you need a solutions provider. Schneider Electric is an innovative part- ner committed to helping you solve your most complex challenges while working with you to adopt the latest technology for your needs. We provide a broad range of cutting edge Control, Automation and power solutions that exceed expectations in the pumping industry. With 150 years of experience, we are dedicated to helping your company find a strategic edge in the market, whether you’re focused on water/wastewater, commercial and industrial building, industry, irrigation, or residential. We have the right solution for your application requirements and the expertise to make it work! For more infor- mation, visit www.schneider-electric.us/pumping. For more information, contact us at 888-778-2733 or visit www.schneider-electric.us/pump. Users’ and Specifiers’ Guide 89

Altivar Drives: Advanced energy management and performance in motor control For more than 30 years, Schneider Electric has supplied AC drives to ener- gy-intensive industries worldwide. Today, the family of Altivar Drives offers the most advanced and user-friendly variable-speed AC Drives and Drive Systems offering on the market. Featuring proprietary motor control algorithms to achieve optimal motor performance and complete scalability to match your application speed, size, and protection requirements, the complete line of Altivar products and solutions delivers the flexibility and performance to: • Optimize a broad range of utility and industrial applications including pumps, fans, compressors, material handling, hoisting, packaging, and material working. • Reduce energy costs by using proprietary energy saving technologies available only from Schneider Electric. • Improve uptime by simplifying installation, commissioning, and main- tenance by providing advanced diagnostics, industry-leading voltage ride-through capability, and seismic-qualified products and solutions. Altivar Process drives have been specifically designed for industrial pumping processes, including: • Irrigation • Mining & Minerals • Industrial • Buildings • Water/Wastewater • Residential • Oil & Gas • And more! For more information, visit www.altivardrives.com. 90 SWPA

SJE-Rhombus 22650 County Highway 6 Detroit Lakes, MN 56501 Phone: 888/342-5753 or 218/847-1317 Web Site: www.sjerhombus.com

Products: AT, CP, CT, LA, PC, PM, SS, VFD Sales & Technical Assistance: Jeremy Drinkwine, Custom Panel Business Development. Cell: 218/850-2491. Office: 218-847-1317, Ext. 3345. [email protected]

SJE Rhombus is a leading control solutions provider, combining over 40 years of expertise in pump controls with the latest technology to deliver energy efficient, cost-effective products for a wide variety of residential, commercial, municipal, industrial and agricultural applications. No matter the applica- tion, SJE Rhombus has a control solution to fi t your needs, whether it’s a simple float switch or septic alarm system to control panels using embedded circuit board technology for advanced programming and monitoring of your system. And if we don’t have it in our standard catalog, we can design and build a custom solution to meet your exact specifications. With corporate headquarters located in Detroit Lakes, Minnesota, SJE Rhombus does business globally from eight locations across the United States and Asia. SJE Rhombus is a 100% employee-owned, privately held company. To learn more, visit www.sjerhombus.com. Users’ and Specifiers’ Guide 91 92 SWPA

Sulzer 140 Pond View Drive Meriden, CT 06450 Phone: 203/238-2700 FAX: 203-238-0738 Web Site: www.sulzer.com

Products: AP, CP, DP, GP, IP, SH, AC, BS, CP, CT, GR, LA, PC, PM, PB, SE, SS Sales Contact: Robert Wright, National Distribution Manager. 203/443-3786 [email protected] Technical Contact: Chris Olofsson, Product & Aftermarket Engineering Manager. 203/514-4294 [email protected]

Sulzer offers the most advanced equipment for water production, transportation, wastewater collection and treatment for municipalities and industries. These products include submersible pumps, mixers, flow boosters, aeration systems, turbocompressors, and easy-to-use systems for monitoring and control. We have more than 100 years of application experience and manufacturing customer-oriented solutions using leading technology. The ABS XFP range of submersible wastewater pumps incorporated the first premium-efficiency IE3 motor designed and tested with IEC60034-30 together with optimized hydrau- lics - yielding the best total efficiency available on the market today. Users’ and Specifiers’ Guide 93 94 SWPA

Topp Industries Inc. P. O. Box 420, Highway 25 North Rochester, IN 46975 Phone: 800/ 354-4534 FAX: 574/223-6106 Web Site: www.toppindustries.com

Products: AC, BS, GR, LA, PS, PB, SE, WW, OO (Structural Foam Basins and Prefabricated Lift Stations) Sales Contact: Ed Kelso 574/224-8653. [email protected] Technical Contact: Judy Terry, Engineered Sales and Customer Service. 574/224-8653. [email protected]

TOPP Industries, Inc. is the leading manufacturer in fiberglass pre-fabricated lift stations. TOPP has fiberglass tanks from 18” thru 120” diameter. Package lift stations are available with attached and unattached valve boxes, that allows the valves, controls and service personnel to be isolated from the wet well. TOPP also has specialists to assist with your specifications and drawings - contact one of our customer service representatives for more information. In addition to lift stations, TOPP also carries a complete line of polyethylene and structural foam basins for your individual needs. To learn more, visit www.toppindustries.com. Users’ and Specifiers’ Guide 95 96 SWPA

Val-Matic Valve & Mfg. Corp. 905 Riverside Drive Elmhurst, IL 60126 Phone: 630/941-7600 FAX: 630/941-8042 Web Site: www.valmatic.com

Products: VA Sales Contact: Diane Meyer, Marketing Manager. 630/993-4022 Fax: 630/993-4087. [email protected] Technical Contact: Ed Gardner, Account Manager. 630/993-4018. [email protected]

Val-Matic is a leading manufacturer of Air Valves, Check Valves and Quarter Turn Shut-Off Valves for water/wastewater, power, industrial, fire protection and HVAC applications. Val-Matic offers six types of check valves including: Surgebuster®, Tilted Disc®, Dual Disc®, Swing-Flex®, Swing Check and Silent Check Valves to meet various applications. The line of shut-off valves consists of the Ener-G® AWWA Rubber Seated Ball Valve, the American-BFV® Butterfly Valve and the Cam- Centric® Plug Valve. Val-Matic has a complete line of Air Valves certified to NSF/ANSI 61 Standard for Drinking Water System Components and NSF/ANSI 372 certifed lead-free. For more information, visit our website at www.valmatic.com. Users’ and Specifiers’ Guide 97 98 SWPA

Vaughan Company, Inc. 364 Monte Elma Road Montesano, WA 98563 Phone: 360/249-4042 FAX: 360/249-6155 Web Site: www.chopperpumps.com

Products: CH, DP, IP, SH, OP, AC, CP, CT, EM, GR, LA, PC, VFD Sales Contact: Stefanie Vaughan 360/249-4042, Ext. 227. [email protected]

Established in 1960, Vaughan Company is the industry leader in reliable chopper pumps and mechani- cal hydraulic mixing systems. With more than half a century of experience, Vaughan Company remains committed to giving their customers outstanding service and the most dependable product solutions in the world. All Vaughan products are proudly made in the USA at our factory in Montesano, WA. Find your reliable pumping solution by calling 888-249-CHOP or by visiting www.chopperpumps.com. Users’ and Specifiers’ Guide 99 100 SWPA

Weil Pump Company, Inc. W 57 N 14363 Doerr Way, P.O. Box 887 Cedarburg, WI 53012 Phone: 262/377-1399 FAX: 262/377-0515 Web Site: www.weilpump.com

Products: CP, DP, GP, IP, SH, AC, AT, BS, CC, CP, CT, EM, GR, LA, PM, SE, SS, VA, VFD, WW Sales Contact: Doug James, Sales Manager. 262/377-1399. [email protected] Technical Contact: Tim Bade, Technical Sales Manager. 262/377-1399. [email protected]

Weil Pump, A Wilo Company, designs and manufactures pumps for commercial, municipal and indus- trial applications. Weil Pump specializes in centrifugal pumps for wastewater handling, condensation return and hot & cold water circulation in submersible, vertical and dry well types. Sewage, grinder, slicer, vortex mover, sump and effluent models are available with standard or U/L explosion-proof motors — all air filled. For corrosive applications, vertical and submersible models are available in stainless steel construction. Removal systems, duplex wastewater valves, control panels, level controls and wet well covers round things out to provide a complete package lineup. Users’ and Specifiers’ Guide 101 102 SWPA

Wilo USA LLC 9550 W. Higgins Rd., Suite 300 Rosemont, IL 60018 Phone: 888/945-6872 FAX: 888/945-6873 Web Site: www.wilo-usa.com

Products: CP, DP, GP, IP, SH, OP, CP, CT, EM, VA, VFD Sales Contact: Joe Jackson, Director of Sales. 801/699-6004. [email protected] Technical Contact: Nick Morris, Applications Sales Engineering Manager. 229/584-0244. [email protected]

Wilo USA is a subsidiary of Wilo SE, which is headquartered in Dortmund, Germany. Wilo is one of the largest manufacturers of heavy-duty municipal and industrial pumps and mixers specifically designed for water and solids-handling applications, including pumps for sludge, tertiary waste and potable water. In addition, Wilo is one of the world’s leading innovators in pumps and pumping sys- tems for heating, ventilation, air-conditioning technology and raw water supply. Wilo is represent- ed worldwide in over 90 countries by more than 60 subsidiaries, including 21 production sites, and employs more than 7,700 people globally. Users’ and Specifiers’ Guide 103 104 SWPA

Zoeller Engineered Products 3649 Cane Run Road Louisville, KY 40211-1961 Phone: 800/928-7867 FAX: 502/774-3624 Web Site: www.zoellerengineered.com

Products: CP, DP, GP, SH, AC, AT, BS, CT, GR, LA, PB, VA, WW Sales Contact: Deron Oberkorn, Business Manager. Ext. 8258. [email protected] Technical Contacts: Steve Doolittle, Product Marketing Manager. Ext. 8215. [email protected]

For 80 years, craftsmen from Zoeller company have been manufacturing quality, American made prod- ucts. From small submersible ejector pumps to larger grinder and solids-handling pump lift stations, you can put your trust and confidence behind Zoeller’s quick deliveries, competitive prices, and toll- free technical support. Users’ and Specifiers’ Guide 105 106 SWPA

106 Order Your Copy Today! The 4th Edition of the Submersible Sewage Pumping Systems (SWPA) Handbook.

Please contact SWPA headquarters at 847.681.1868 or click on the link “SWPA Handbook – 4th edition” at www.SWPA.org Rely on This Symbol

Submersible Wastewater Pump Association 350 North LaSalle Street, 9th Floor u Chicago, IL 60654 Phone: 847.681.1868 u FAX: 312.475.9022 E-Mail: [email protected]

For more information about the Association and the industry it serves, Visit our Web Site at www.SWPA.ORG