Compatibility Specifications Important Safety Instructions Compatible with Qi-enabled devices* including • Wireless Standard: WPC/Qi (v1.2.4) • Only use original or reputable third party chargers and cables • Input: DC 5V/2A or 9V/1.67A • Only use the product for the specified purpose of use • iPhone 12 Pro/Max • Note 20/10/9 • Wireless Output: 10W / 7.5W / 5W • iPhone 12/mini • 5/4/3 • Do not get wet to avoid causing short circuit damage and Model: WCBH10 • Working Frequency: 110 to 205KHz leakage • iPhone 11 Pro/11 • Xperia XZ3/XZ2 • Charging Distance: 3 to 8mm 10W Wireless Fast Charging Bamboo Organiser • iPhone SE/XS/XS Max/XR • Mi 10/v 9 • Do not use in extreme hot, humid or corrosive environments to • Charging Efficiency: >72% avoid short circuit damage and leakage User Manual ver 1.3 • iPhone X/8/8 Plus • LG G8S/G7 ThinQ • Size: 288mm (L) x 137mm (W) x 15mm (H) • Samsung S20/S10/S9/S8 • LG V30+/V40 • Do not place too close to magnetic strip or chip ID card to avoid magnetic failure Features Wireless Charger Operation • Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential • Supports 10W wireless fast charging for compatible devices • Using the included micro USB cable, connect the wireless interference such as the Series and more# charging organiser to a USB wall charger (USB wall charger not • Do not clean with harmful chemicals or detergents • Supports 7.5W wireless fast charging for iPhone 8 or later# included) • Misuse, dropping or excessive force may cause damage to the • Supports 5W standard wireless charging for all Qi enabled • It is recommended to use original or reputable 3rd party charging dock devices branded USB wall chargers. For faster charging times it is • Do not use the product if it is damaged or emits a suspicious • No need to remove your protective case. Works with most recommended to use a USB wall charger with a minimum of 2A odour cases up to 3mm thick output • Unplug the product from power sources when not in use • LED indicator to show charging status • Place your Qi enabled wireless phone on the Comsol logo and • Full safety protection for your devices with Qi certified your phone should start charging automatically Please Note: When wirelessly charging a device, the wireless temperature control, strict voltage regulation & short circuit • If your phone does not start charging, move your phone until charger and your device may feel warm. This is a normal protection the correct position is found and your phone starts charging operating condition and should not be cause for concern. • Includes 1.5m micro USB cable to connect charging pad to • When your phone is fully charged, the Smart IC enables energy USB wall charger (USB wall charger not included) saving trickle charge mode

Please Note To achieve 10W fast charging for Android devices or 7.5W fast charging for Apple devices, the charging organiser needs to be connected to a Quick Charge 2.0/3.0 or USB-C PD wall charger iPhone is a trademark of Apple inc., Qi Certified (not included) registered in the U.S. and other countries. Certification program ensures this The ‘Qi’ Symbol is a trademark of the charger has passed rigorous tests Wireless Power Consortium. to guarantee safety, compatibility and energy efficiency. * Check with device manufacturer for Qi wireless compatibility www.mycomsol.com.au Made in China # When connected to a QC 2.0/3.0 or USB-C PD wall charger (not included)