SELECT VEHICLE PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
2 Print only the pages for your vehicle using the advanced options in the Print menu.
3 Install your Maestro RR according to the guide for your vehicle.
WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners. INSTALL GUIDE Hyundai Accent Base 2012-2013 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Accent Base 2012-2013
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Accent Base 2012-2013
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
1
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Accent Base 2012-2013
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash ~
SWI 1 B ~ 24 pin 04 Yellow/Orange (DATA) Behind radio ~
SWI Feed B ~ 24 pin 17 Orange (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Azera Base 2006-2011 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Azera Base 2006-2011
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Azera Base 2006-2011
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 C- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
7 6 5 4 3 2 1
13 12 11 10 9 8
20 19 18 17 16 15 14
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
3
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Azera Base 2006-2011
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 C ~ 20 pin 05 White (DATA) Behind radio ~
SWI Feed C ~ 20 pin 06 White/Black (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Azera Base 2012-2013 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Azera Base 2012-2013
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Azera Base 2012-2013
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
1
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Azera Base 2012-2013
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Brown (DATA) OBDII connector, under driver side dash ~
SWI 1 B ~ 24 pin 04 Yellow/Black (DATA) Behind radio ~
SWI Feed B ~ 24 pin 17 Yellow/Black (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Elantra Base 2007-2010 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Elantra Base 2007-2010
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Elantra Base 2007-2010
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 C- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
7 6 5 4 3 2 1
13 12 11 10 9 8
20 19 18 17 16 15 14
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
3
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Elantra Base 2007-2010
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 C ~ 20 pin 05 Green (DATA) Behind radio ~
SWI Feed C ~ 20 pin 06 Black (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Elantra Base 2011-2012 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Elantra Base 2011-2012
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Elantra Base 2011-2012
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
1
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Elantra Base 2011-2012
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio ~
SWI Feed B ~ 24 pin 17 Green (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Elantra Touring Base 2007-2010 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Elantra Touring Base 2007-2010
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Elantra Touring Base 2007-2010
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 C- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
7 6 5 4 3 2 1
13 12 11 10 9 8
20 19 18 17 16 15 14
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
3
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Elantra Touring Base 2007-2010
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 C ~ 20 pin 05 Green (DATA) Behind radio ~
SWI Feed C ~ 20 pin 06 Black (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Elantra Touring Base 2011-2012 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Elantra Touring Base 2011-2012
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Elantra Touring Base 2011-2012
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
1
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Elantra Touring Base 2011-2012
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio ~
SWI Feed B ~ 24 pin 17 Green (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Genesis Coupe Base 2010-2013 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Genesis Coupe Base 2010-2013
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Genesis Coupe Base 2010-2013
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 C- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
7 6 5 4 3 2 1
13 12 11 10 9 8
20 19 18 17 16 15 14
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
3
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Genesis Coupe Base 2010-2013
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash ~
SWI 1 C ~ 20 pin 05 Brown (DATA) Behind radio ~
SWI Feed C ~ 20 pin 06 Black/Orange (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Santa Fe Base 2007-2009 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Santa Fe Base 2007-2009
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Santa Fe Base 2007-2009
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 D- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED 1
7 6 5 4 3 2
14 13 12 11 10 9 8
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
4
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Santa Fe Base 2007-2009
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Red/Black (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash ~
SWI 1 D ~ 20 pin 11 Blue (DATA) Behind radio ~
SWI Feed D ~ 20 pin 12 Gray (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Santa Fe Base 2010-2012 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Santa Fe Base 2010-2012
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Santa Fe Base 2010-2012
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 C- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
7 6 5 4 3 2 1
13 12 11 10 9 8
20 19 18 17 16 15 14
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
3
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Santa Fe Base 2010-2012
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash ~
SWI 1 C ~ 20 pin 05 Blue (DATA) Behind radio ~
SWI Feed C ~ 20 pin 06 Gray (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Sonata Base 2006-2010 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Sonata Base 2006-2010
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Sonata Base 2006-2010
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 E- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 1 7 6 5 4 3 2
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
5
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Sonata Base 2006-2010
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 E ~ 24 pin 18 Brown (DATA) Behind radio ~
SWI Feed E ~ 24 pin 19 Green (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Sonata Base 2011-2013 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Sonata Base 2011-2013
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Sonata Base 2011-2013
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 15 CANL
1 WIRES FROM 2 07 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
6
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Sonata Base 2011-2013
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 07 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 15 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 B ~ 24 pin 04 Gray (DATA) Behind radio ~
SWI Feed B ~ 24 pin 17 Green (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Tucson Base 2010-2013 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Tucson Base 2010-2013
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Tucson Base 2010-2013
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
1
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Tucson Base 2010-2013
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash ~
SWI 1 B ~ 24 pin 04 Blue (DATA) Behind radio ~
SWI Feed B ~ 24 pin 17 Gray (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Veloster Base 2012-2013 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Veloster Base 2012-2013
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Veloster Base 2012-2013
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 B- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
7
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Veloster Base 2012-2013
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash ~
SWI 1 B ~ 24 pin 05 Gray (DATA) Behind radio ~
SWI Feed B ~ 24 pin 17 Green (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Veracruz Base 2007-2008 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Veracruz Base 2007-2008
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Veracruz Base 2007-2008
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 F- LOCATED BEHIND RADIO
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
2
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Veracruz Base 2007-2008
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Orange (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash ~
SWI 1 F ~ 24 pin 06 Blue (DATA) Behind radio ~
SWI Feed F ~ 24 pin 18 Blue/Black (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4 INSTALL GUIDE Hyundai Veracruz Base 2009-2013 retains steering wheel controls and adds gauges
PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro RR Radio Replacement Interface None ADS-RR(SI)-HYU01-DS iDatalink Compatible Radio
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Hyundai Veracruz Base 2009-2013
WELCOME DURING INSTALLATION
Wiring Diagram 3 Congratulations on the purchase of your iDatalink Maestro RR Radio Vehicle Wire Reference Chart 4 replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle as per the Getting Started section, and that you carefully review the Installation Diagram and Vehicle Wire Reference Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
NEED HELP? 1 866 427-2999
maestro.idatalink.com/support www.12voltdata.com/forum
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 2 Hyundai Veracruz Base 2009-2013
WIRING DIAGRAM
STEP 1 OBDII CONNECTOR LOCATED UNDER DRIVER SIDE DASH
BROWN/YELLOW - CANL BROWN/RED - CANH 14 CANL
1 WIRES FROM 2 06 CANH 3 4 VEHICLE 5 9 6 10 7 11 8 12 13 14 15 16
STEP 2 C- LOCATED BEHIND RADIO
BLACK/WHITE - SWI GROUND FEED (-) OUTPUT SWI FEED
7 6 5 4 3 2 1
13 12 11 10 9 8
20 19 18 17 16 15 14
PURPLE/RED - SWI CIRCUIT 1 INPUT SWI 1
STEP 3 CONNECT TO AFTERMARKET RADIO
GRAY/RED - ACCESSORY (+) INPUT RED YELLOW - 12V (+) INPUT YELLOW BLACK - GROUND BLACK
STEP 4 MAESTRO RR MODULE
G
H
A H G A
3
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 3 Hyundai Veracruz Base 2009-2013
VEHICLE WIRE REFERENCE CHART
Wire Connector Connector Connector Module Component Position Wire Color Polarity Description Name Color Type Location Locator
CanH A ~ 16 pin 06 Orange (DATA) OBDII connector, under driver side dash ~
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash ~
SWI 1 C ~ 20 pin 05 Blue (DATA) Behind radio ~
SWI Feed C ~ 20 pin 06 Blue/Black (-) Behind radio ~
Automotive Data Solutions Inc. © 2014 ADS-RR(SI)-HYU01-DS maestro.idatalink.com 4