Sensaphone 400 & 800 Series Expand the Capabilities of Your

Sensaphone 400 & 800 Series Expand the Capabilities of your Sensaphone

2.8K Room Temperature Sensor Humidistat Humidity Switch Designed to monitor air temperature Wall mount humidity sensor to detect high in a clean, indoor, environment. The or low humidity levels. Alarm limits are sensor will monitor temperatures from 0° to 120°F. adjustable from 10% to 80% RH. Multiple Requires connecting wire. sensors may be wired to a single input. Works with all Sensaphone products. Requires 2 .8K Temperature Sensor ...... FGD-0100 connecting wire.

2.8K Weatherproof Humidistat Humidity Switch ...... FGD-0027 Temperature Sensor Small, sealed, general purpose temperature PowerOut Alert Power Failure Switch probe for indoor or outdoor use. The sensor will monitor A compact power outage monitoring device to temperatures from -20° to 115°F. Comes with 12 feet of detect power failures. Easily plugs into any 110 connection wire. VAC receptacle outlet for operation. Works with all Sensaphone products. 2 .8K Weatherproof Temperature Sensor ...... FGD-0101

PowerOut Alert Power Failure Switch ...... FGD-0054 2.8K Temperature Sensor in Glass Bead Vial Magnetic Reed Door & Ideal for cold storage temperature monitoring, Window Switch the glass bead vial will buffer any momentary The magnetic reed switch may be used fl uctuations that may cause a preliminary with all Sensaphone models to detect any unauthorized alarm dial out such as defrost cycles, opening of doors, and entry or intrusion. They are usually installed on doors fans circulating air. The sensor will monitor temperatures and windows to detect their opening and closing. Several from -20° to 115°F magnetic reed switches may be wired in series.

2 .8K Temperature Sensor in Glass Bead Vial ...... FGD-0107 Magnetic Reed Door and Window Switch ...... FGD-0006

Temp Alert Temperature Switch Spot Water Detection Sensor Wall mount, mechanical temperature The water detection sensor can be used sensor to detect if air temperature is too with all Sensahone models to detect the high or too low. Alarm limits are adjustable from -30° to presence of water on a horizontal surface. Independently 130° F. Works with all Sensaphone products. Requires powered by internal lithium batteries. The batteries should connecting wire. last for approximately 3-5 years. When the batteries start

Temp Alert Temperature Switch ...... FGD-0022 to run down, the sensor will automatically cause an alarm dial out when no water is present. Multiple sensors can be wired in series to a single input.

Spot Water Detection Sensor ...... FGD-0013 Zone Water Detection Sensor Float Switch For use in detecting the presence of Side mounted float switch water on a floor or in a false ceiling. that is effective in level Comes with 10’ of WaterRope cable control applications in small tanks where it is more to cover a larger area than the FGD-0013 water convenient to install a level switch through the sidewall of sensor. Up to three WaterRopes can be cascaded from a the tank. Can be set to normally open or closed. single sensor for even greater coverage. Works with all Sensaphone products. Comes with 25 feet of wire. Float Switch ...... FGD-0222

Zone Water Detection Sensor...... FGD-0056 Additional 10’ of Water Rope ...... FGD-0063 Surge Suppressor for Power & Phone Infrared Motion Detection Sensor Protects Sensaphone products from high voltage surges through AC power and This passive infrared motion detector can be telephone lines. Particularly important in used with all Sensaphone models to monitor areas of high lightening activity. Works with all Sensaphone the movement of warm bodies in a specific area. products except the SAT4D. It will cause an alarm if motion is detected. It’s range of detection covers approximately forty feet of area. Multiple Surge Suppressor for Power and Phone...... FGD-0067 sensors can be wired in series to a single output.

Infrared Motion Detection Sensor...... FGD-0007 Dual Setback Thermostat For use with the Model 400 and 800, this is Smoke Detection Sensor a “setback” thermostat with a LCD readout This photoelectric smoke alarm is powered that has a programmable “home” and by a hard wired 120VAC connection and “away” temperature setting. provides an alarm output to trigger a Sensaphone alarm dial out. Works with all Dual Setback Thermostat...... FGD-0064. . Sensaphone products. Power Supply for Dual Setback Thermostat...... XFR-0024 Smoke Detector w/battery backup...... FGD-0049-B

A complete accessory specification sheet is available for all sensors and accessories. A complete parts list is available upon request or at www.sensaphone.com. All specifications subject to change.

SENSAPHONE® Distributed By: 901 TRYENS ROAD ASTON, PA 19014

PH: 877-373-2700 F: 610-558-0222