SCHLAMBERGER P&J CATALOGUE 2015

1 Mina markovič // radovna photo by luka fonda

2 table of contents bleaustone hueco tanks 8 fontainebleau 13 limestone 21 gritstone 26 granite 32 classic 34 training range 38 variety of grip options 42 captain crux 100 traditional 46 300 granite 51 500 sandstone 57 cruxies 60 23 holds mini volumes 62 lapis crimps 70 edges 71 incut edges 73 mini goodys 74 goodys 75 macro goodys 76 open handed goodys 77 screw-ons 79 footholds 80 pinches 81 pockets 83 slopers 84 balls 86 training accessories 87 bouldering set 88 volumes 89 accessories 91 care & maintenance 92 colours 93 3 4 kevin jorgeson // hueco tanks photo by andy mann

5 6 7 jugs

BLEAUSTONE hueco HUECO TANKS

ueco tanks H ueco hueco CRIMPS Hueco INCUT MINI EDGES BLEAUSTONE

Structure: 20 M Structure: 10 M Depth of the bolt hole (mm): 14,15X3,16X2,17X5,18X5,19X2,20X2 Depth of the bolt hole (mm): 14,17,18,19X322X2,23X2 KEY FEATURES: KEY FEATURES: -The most advanced crimps in the series, offering huge variety of grip option • 10 holds in a set and challenging features • Size-wise can accept one full hand and part of the other - Perfect for all routes, but great for more challenging routes • Multi-functional; can be used from all sides varying difficulty - Compliment other sets in the range • Positive on roofs, ideal for steep routes - like those found in Hueco - Varied positivity per finger depending on what hand is used • Great for easy routes on less steep ground - Extra screw holes for more positioning options • 2 extra screw holes for more positioning options

8 Hueco MINI EDGES Hueco EDGES

Structure: 10 M Structure: 10 l Depth of the bolt hole (mm): 19, 21, 22, 24, 24, 24, 25, 26, 27, 31 Depth of the bolt hole (mm): 37, 38, 39, 39 40 KEY FEATURES: KEY FEATURES: • 10 holds in a set • 10 holds in a set • Size-wise can accept one full hand and part of the other • Size-wise can accept two full hands. with some option of alternate positions • Multi-functional, can be used from all sides. • Multi-functional; can be used from all sides -varying difficulty • Positive up to 45degree wall angles • 5/10 ideal for steep routes and some are more technical • Ideal for all grades of routes • Perfect for easy routes on less steep ground • 2 extra screw holes for more positioning options • 2 extra screw holes for more positioning options

hueco MONDO EDGES Hueco MINI jugs tanks H ueco BLEAUSTONE

Structure: 5 XXXL Structure: 10 M Depth of the bolt hole (mm): 36,37,37,38,39 Depth of the bolt hole (mm): 18, 20, 22, 22, 22 23, 23 24, 24, 27 KEY FEATURES: KEY FEATURES: • 5 holds in a set • 10 holds in a set • Size-wise can accept two full hands with options for repositioning either hand • Size-wise the jug sits under the 3rd phalange of the fingers • Multi-functional; can be used from all sides to vary difficulty/positivity • Positive on roofs up to 60 deg, ideal for easier routes • 2/5 Positive on roofs, the others are great for interesting challenging routes • Great for beginners progressing to intermediate grades • Good for easy technical routes on less steep ground • 1 extra screw holes for anti-rotation • 3 extra screw holes for more positioning options

9 Hueco JUGS Hueco FLAT JUGS

Structure: 10 L Structure: 10 l Depth of the bolt hole (mm): 25, 26, 28, 28, 29, 30, 30 30, 33, 35 Depth of the bolt hole (mm): 24, 24, 24, 24, 27, 27, 28, 31, 33, 36 KEY FEATURES: KEY FEATURES: • 10 holds in a set • 10 holds in a set • Size-wise the jug accepts full fingers • Size-wise can accept one full hand and part of another. • Positive on roofs up to 90 deg, Perfect for easier routes • Positive on roofs up to 30 degrees • Great for beginners, and intermediate climbers on steeper ground • Great for beginners progressing to intermediate grades • 1 extra screw holes for anti-rotation • Perfect clipping hold, zaps the last bit of energy from the climber! • 1 extra screw holes for anti-rotation

ueco tanks H ueco hueco FOOTHOLDS Hueco POCKETS BLEAUSTONE

Structure: 20footholds Structure: 10 L Depth of the bolt hole (mm): 12,13,14X4,15X7,16,17X3,18X2,20 Depth of the bolt hole (mm): 29, 30, 31, 35, 37, 38 42, 42, 42, 44 KEY FEATURES: KEY FEATURES: - Perfect addition to the range in helping create hueco-like routes • 10 holds in a set - Have features similar to those found on martini roof like the ear, so can be • 2/3 finger pockets, some can accept both hands simultaneously used as extremely technical hand holds • Rotated about the bolt hole will open up multiple grip options - Multifunctional; rotationally offer wide variety of positivity per hold • Varied positivity and technicality - Suitable for all wall angle and grade of route • Great for all grades of routes - Countersunk bolts should be used with these holds • 2/3 extra screw holes for more positioning options

10 Hueco PINCHES Hueco XXXL

Structure: 10 XL Structure: 3 XXXL Depth of the bolt hole (mm): 15, 16, 16, 18, 19, 19, 19, 20, 24, 28 Depth of the bolt hole (mm): 45, 60, 62 KEY FEATURES: KEY FEATURES: • 10 holds in a set • 3 holds in a set • Size-wise can accept both hands simultaneously • Inspired by East mountain’s moonshine roof area • Full-hand or finger-tip pinches included • Great for any creative route setter • Rotated about the bolt hole will open up multiple grip options • Perfect ‘glory route’ holds • Varied positivity and technicality • Varied positivity and technicality • Great for all grades of routes • Rotated about the bolt hole will open up multiple grip options • 2/3 extra screw holes for more positioning options • Great for all grades of routes • 3 screw holes for more positioning options

hueco Double Pocket Hueco lobster claw tanks H ueco BLEAUSTONE

Structure: 2 Structure: 1 Depth of the bolt hole (mm): 60, 70 KEY FEATURES: KEY FEATURES: • Inspired by the nature of the climbing on the lobster claw problem • 2 holds in a set • The result is a hold great for all types of route • Inspired by pockets found on North mountain on Martini roof • Perfect for creative route setting • Perfect for any creative route setter wanting to create the perfect ‘glory route’ • Multiple hold options, pinches, slopers, crimps, jugs • Super positive with multiple grip options • Has a central bolt hole to aid positioning (MAX Torque 10Nm) • Great for all grades of routes • Use screw holes for main fixation. • 3 screw holes for more positioning options

11 Hueco moonshine roof

Structure: 1 KEY FEATURES: • Inspired by a key hold on moonshine roof, from this hold you either contin- ue on to ‘moonshine left, or right’ • Has a unique positive flake, perfect for creative route setting • Has a central bolt hole to aid position- ing (MAX torque 10Nm) • Use screw holes for main fixation ueco tanks H ueco BLEAUSTONE

Hueco mondo pockets

Structure: 5xxl Depth of the bolt hole (mm): 36,49,58,69,78 KEY FEATURES: - Inspired by the pockets found in the North Mountain area of Hueco Tanks; Namely Martini Roof. - Deep pockets for all grades of routes, over all angle of wall - Super-positive with many grip options - Features ‘hidden positivity’; pocket offers a little extra the deeper you go - Perfect for creating outstanding, and eye-catching problems - each have 3 screw holes for more fixing options

12 BLEAUSTONE fontainebleau fontainebleau Fontainebleau crimps BLEAUSTONE

Structure: 20S/M Depth of the bolt hole (mm): 10X22,10X23 KEY FEATURES: The First set of crimps ever to come out of Bleaustone was the original Fontainbleau crimps, from 2005. They have been amongst the most popular holds out of the whole series, and have had a long and happy service life. But after 8 years they have decided to go into retirement and make way for a younger, fresher looking set of crimps; the new 2013 Fontainebleau Crimps. With the addition of the new edges in the Font line, we thought it best we now bring the 2013 crimps onto the next level. These crimps are more functional for the route setter, no longer will you want to use one or two as foot holds, the grip options are better, split in to five categories, you will find positive holds for wall angles up to 60, 45, 30, 15 degrees as well as flat and slopey holds. They also carry the hallmark of the Fontainebleau Elephant-skin texture, which is on the highest possible level, and each hold features an extra screw hole.

13 fontainebleau incut crimps fontainebleau mini edges

Structure: 10S Structure: 2M, 8L Depth of the bolt hole (mm): 16,17,20,21X7 Depth of the bolt hole (mm): 18,20,21,25,20,36X5 KEY FEATURES: The introduction of this new concept into the Bleaustone KEY FEATURES: According to the “Bleaustone book of climbing holds. Vol II”, series means we’ve broadened the spectrum of size vs. positivity. an edge is a hold that you can place at least two hands upon. With these Mini This set of 10 new Fontainebleau In-cut CrimpsTM are exactly what you’d edges we are minimising their footprint, but maximising the usability of the expect them to be -Like crimps that you find on steep overhangs in the hold. The Font mini edges also boast advancements to the style and texture forest of Fontainebleau. The only difference being is that they are a lot more (which has always been done by hand), getting even closer to the real thing comfortable to hold! The size of the crimp edge varies between the lengths of whilst maintaining finger friendly curves. It is important for us that we feel our one fingertip to one-and-a-half fingertips. The radii of which are such that they holds all the way through the design process, this way we can guarantee that allow the finger joints to naturally roll over the hold optimizing the grip and you will be getting the best experience out of the holds when you climb and comfort. They have been designed to accept all four fingers. route set with them. With all of our holds, when they’re rotated about the bolt They also have a screw hole that you can use to fix the hold along side the hole axis changes the position of the climbers thumb, this has be taken into ac- bolthole. count when the holds are designed to maximise or minimise this thumb option. Climbing on these edges can be a lot of fun, Sometimes forcing the climber to really think about how they approach the hold, and move away from it. Some of the holds require subtlety of movement, whilst others force a more dynamic approach. fontainebleau fontainebleau fontainebleau EDGES fontainebleau nano jugs BLEAUSTONE

Structure: 2L, 8XL Structure: 20S Depth of the bolt hole (mm): 34,37,40,7X45 Depth of the bolt hole (mm): 9,12,16,17,18X16 KEY FEATURES: This is a brand-new re-designed set of Fontainebleau KEY FEATURES: The nano Jug (S) concept introduces the smallest jugs EdgesTM. The set is larger in volume to the previous set of 10. Each hold now fea- within the whole Bleaustone series. The idea behind them is to maximise pos- tures 2 or more screw holes so they can be positioned anywhere on a wooden itivity with the smallest of footprint. Some of these jugs are positive on roofs, climbing surface allowing for greater flexibility in route-setting. The holds have and will help you push beginners and intermediate climbers into the higher been designed on a higher level so a wider range of grades can be achieved grades. These jugs also feature a new introduction of a small foothold/crimp in setting routes, this includes features like: Varied positivity, finger-thumb opposite the jug - useful when the hold is turned as an undercut and also offer position, how the texture works with the hold, and how the climbers hand is interesting alternative hand positions to add to route setting variety. Within forced and positioned. Coupled with the high-level of route-setting now seen the set you will find equal numbers of left and right handed holds, including in many gyms, these holds will be a valuable addition and cornerstone to any dual handed ones. These 20 holds are an excellent addition to the Fontaineb- route setter’s selection. leau Range and a must for a route setter’s outfit.

14 fontainebleau mini jugs fontainebleau super jugs

Structure: 20S/M Structure: 10 l Depth of the bolt hole (mm): 21,22,23,24,16X31 Depth of the bolt hole (mm): 27,29X2,31X5,32X2,33 KEY FEATURES: The Fontainebleau Mini Jugs are amongst the most popular KEY FEATURES: set of holds within the whole Bleaustone® Series. They are the cornerstone of - Brand new design for 2015 any route on a climbing wall, and offer a huge range of possibility in creating all - Even more positive on roofs or steep over hangs (60-90 degrees) routes across all grades. - great for easy routes designed to go over the steepest part of your wall This set has been redesigned from the original set of Mini Jugs, and are all - Small footprint slightly larger, and even more comfortable than before allowing for a much - Ideal for Beginners on less steep walls or slabs better climbing and route setting experience. - Feature an extra screw hole for anti-rotation. fontainebleau fontainebleau jugs fontainebleau flat jugs BLEAUSTONE

Structure: 20M Structure: 10L Depth of the bolt hole (mm): 15,19,21,23,24,30,13X31 Depth of the bolt hole (mm): 27,28X2,29X2,30,31,32,35,36 KEY FEATURES: This new set of Jugs now completes the line of the entire KEY FEATURES: This is a Brand-New Hold concept introduced in 2012. The Bleaustone Jug family. They are the cornerstone of any route on a climbing flat jug has been hold as the bridge between a Jug and edge and has been wall, and offer a huge range of possibility in creating all routes across all design to make climbing a bit more challenging for the beginner or advanced grades. climber. This set has been designed to include equal numbers of left and right handed The Flat Jug limits how high you can move between holds, this is because the holds and dual handed holds. In terms of positivity, they are great on extremely hand is forced open the higher you move above the hold. Once in the hand of a steep overhangs, and can be used on roofs making such routes more chal- competent route setter he/she will see the benefits when creating routes more lenging. They are easier to hold than the mini jugs, as they fit the whole hand challenging for the beginner climber and advanced climber. better, yet a little less positive than our super jugs. Ergonomically, these are the To give you an idea, when set on a wall of 15 Degrees, the hold surface would most comfortable single-handed types of jugs with-in the Bleaustone Series. be approximately parallel to the ground. When they are set on steeper wall angles, they become a lot harder to hold than a standard Jug.

15 fontainebleau mondo jugs

Structure: 2L, 8XL Depth of the bolt hole (mm): 27,27,32,34,35,36X5 KEY FEATURES: This new set of Mondo Jugs not only features our unique Fon- tainebleau Texture, but also includes a more positive grip for ALL types of wall angles compared to the original set. These jugs boast many more features that allow for more creative route setting at all levels of difficulty. Mondo Jugs are holds that you are able to put both hands comfortably, which is ideal when wanting to set routes on steep sections for the beginner/intermediate climber. ainebleau

fontainebleau footholds fontainebleau mondo footholds font BLEAUSTONE

Structure: 10footholds Structure: 10footholds Depth of the bolt hole (mm): 16,18,19X4,20X3,21 Depth of the bolt hole (mm): 25X2,26X2,28X2,29 KEY FEATURES: KEY FEATURES: The demand for this type of set came from the fact that - Designed specifically to be the workhorse of a route-setter’s collection route setters had a tendency in the past to use Nano Jugs or similar holds for - Ideal for all grades of route on all angles. feet in a route. This set has the basic shape and size of a Nano Jug, but has - Multi-functional; the smallest rotation of a hold will yield a different feature additional features ideal for setting for feet. for the foot. This hold is the climbing gym’s workhorse. Perfect for all types of routes, and - The most important holds to have on your wall, to get the most out of setting. Each hold will vary how positive it is to the climber when rotated specific handholds in your assortment around 360 degrees. So as a route is being set you can immediately decide how - Invaluable addition to existing holds from the whole range. easy or hard to make a move off of the foothold with a simple rotation. The Fontainebleau Mondo Footholds have the most positive and slopey features all in each hold, and can be set on any wall angle. The bolt-hole depth has been optimized so the hold is as strong as possible to give you the maximum service life.

16 fontainebleau screw-ons fontainebleau specials

Structure: 20S Structure: 12XS, 8S Depth of the bolt hole (mm): 5,6,7,8,10X11 Depth of the bolt hole (mm): 3, 10,11,14,16X16 KEY FEATURES: To create more delicate/precise foot work on routes or KEY FEATURES: Designed specifically for competitions or technical prob- more balanced climbing technique on slabs the Fontainebleau screw-ons will lems. With this set, where the Fontainebleau texture has been exploited, the be a valued addition to any set within the range. For use on wood panels or routes that can be set are left to the imagination. volumes -or whatever you can screw into! Using them as technical foot holds or intermediate holds will always add interest to any route or problem. These screw-on holds are for wooden walls only, and are made from our strongest material (UHS). The Set of 15 technical holds also includes an arête combo that makes for a great pinch. fontainebleau pinches fontainebleau pockets fontainebleau BLEAUSTONE

Structure: 5S, 10M 5L Structure: 5S, 10M, 5L Depth of the bolt hole (mm): 12,14,17,44,50,57,58,60X13 Depth of the bolt hole (mm): 10,14,17,21,22,37,38X14 KEY FEATURES: The Fontainebleau pinches capture the essence of the KEY FEATURES: The pockets found in Fontainebleau are by far the most textures and forms found in the forest. The set of 20 offers a diverse style of unusual because of the unique geology of the sandstone. pinch from thin to wide, round to positive and simple to technical. The whole texture, shape and uniqueness have been imitated to bring the They been designed to suit all types of route or boulder problem and can be experience closer to home. used on all wall angles and are a great complement with any other set from The set includes again a wide variety of shape, size, and difficulty including the Bleaustone series. both positive juggy pockets to extremely technical ones. These unusual looking pockets will make any route or problem special and inspiring

17 fontainebleau SLOPERS fontainebleau CIRCUIT SET

Structure: 2L, 8XL Structure: 3S, 7M, 4L, 5XL Depth of the bolt hole (mm): 45,60,65,69,76,79,81,86X3 Depth of the bolt hole (mm): 15,18,22,26,34,36,2X43,45,66,73 KEY FEATURES: We’ve travelled around the boulders in Fontainebleau, KEY FEATURES: The Fontainebleau Circuit set was initially design for a found the best problems with the best slopers on and tried to recreate that competition staged in Koln, Germany. The set contains a wide variety of holds feeling. From El Poussah, Isatis, to Cortomaltèse, Bas Cuvier, from crimps to jugs and has been designed for setting numerous indoor circuit It is almost impossible to recreate a Fontainebleau sloper -you would need a problems - like those found in the Fontainebleau forest. The carving style of hold the size of the boulder itself to get the perfect feeling of that slap where the holds also explore other textures and styles found in these areas. your whole arm is needed to just hold on!!

la balance

KEY FEATURES: La Balance sums up the philoso- fontainebleau fontainebleau phy of climbing in Fontainebleau. In trying to recreate the feeling of climbing in font you can only go so far; we aspire to provide route setters the tools they need to allow them the widest range of creative possibilities and in doing so hope to recreate those magical feelings of climbing in the forest - a somewhat epic task. La balance is a hold that is a sloper that varies, but BLEAUSTONE also offers a chance to pinch and crimp, depending on how it is positioned. It can be placed anywhere providing screws can be used.

la patinoire

KEY FEATURES: La Patinoire is a hold inspired by the texture found in Fontainebleau that comes in the form of the smooth quartz; you might recall those small edgy crimps, precariously shiny foot holds that seem like ice - and somehow you stick. Le Patinoire is predominantly an edge, of many edges in one, depending on how you rotate it during setting. Parts of it are positive, but require some investigation to extract the most from it. So it is ideal for all ranges of routes and boulder problems. Fixed to the wall with screws only.

18 Le Pincemont

KEY FEATURES: Climbing in Fontainebleau requires a totally different approach to climbing. Unless you’re not human, the ‘pull and go approach’ doesn’t always work here. You have to rethink everything you ever thought about technique, and how you hold on to the rock. Any preconceived notions about what will work and what will not needs be left at home. The delicate and subtle nature of climbing in Font is, for all intents and purposes, almost impossible to recreate. We try, and here we have a hold that is subtle, requires you to hold it in ways that suit the problem, not you. How wide you can pinch, might help you; how hard you can crimp might too, it depends on how the route setter was feeling, and where he/she wants you to go. Used in the right way, this hold can be put anywhere, on any type of route or boulder problem. Fixed to the wall with screws only.

Le Ceour

KEY FEATURES: Le Coeur is the name of a boulder problem in Fontainebleau the sector of L’Éléphant. The name comes from the heart-shaped crimp-like hold on the face of the boulder. It is gained by delicate footwork and like most problems in Fontainebleau require good technique to hold and move away from to the final top out. This carving is the indoor climbing wall’s equivalent. Made slightly more positive to also suit steeper walls (>15 degrees), combined with some high-end route setting, any route setter can try to recreate a Fontainebleau classic 7a with this. fontainebleau

El Pousiff

KEY FEATURES: Another classic problem of Isatis, El Poussiff’s BLEAUSTONE main feature apart from being a technical odyssey is the pinch you have to use to drag your self to the top - unless of course you have been blessed elegant technique -synonymous with those literally born in the forest. This mini volume is a slopey, open-handed pinch designed to be a challenge on all wall angles being the most technical of all mini volumes in the series. Fixed to the wall with screws only. excalibour

KEY FEATURES: - The name inspired by another classic problem in font - Principle sloper, using the texture as differing grip options around the mini volume - Ideal for more challenging problems requiring finesse and balance - Fixed to the wall with screws only

19 La Statique

KEY FEATURES: One of the most prominent problems in Franchard Isatis, Le Statique has a huge amount of the ‘elephant’ skin texture covering it and is one of the most impressive pieces of rock formation in the forest. It is a classic problem of this particular area of Fontaine- bleau. This mini volume represents a tiny section of that rock, based on the crucial hold used to get you to the top. The pinch, or crimp, depending on how you use it is the main feature of the mini volume. Ideal for any level of route, either on a boulder, or route, it is positive enough to be put on an over hanging wall, and slopey enough to really challenge the climber. These mini volumes are fixed only with screws.

cortomaltese

KEY FEATURES: Inspiration As the name implies, It’s no surprise that this volume has been inspired by the infamous problem found in Bas Cuvier, Fontaine- bleau; Cortomaltese, font 7a. Where to use it This volume will draw a huge amount of attention, with stunning texture and size it will be an ideal addition to the perfect centre-piece route. Great for competitions, great for recreating a life-like Fontainebleau boulder problem. It is slopey on all surfaces, but each way it is positioned will give a different feel. Two main slopers on the top mimic those found on the actual problem when set on a wall between 0-15degrees - varying the wall angle will change the hold’s difficulty. Being extremely versatile, it’s perfect for all grades of prob- lem, but probably better suited to intermediate and hard problems. Special features This Cortomaltese volume has been created with

fontainebleau fontainebleau Bleaustone’s unique stylised Fontainebleau texture that you will not find on any other climbing hold, world-wide, with the same feeling. The volume mimics very closely the main two slopers and face of the problem found in Bas Cuvier but gives you added variability to allow the seasoned route setter to make the most creative of routes. Affixing Requirements The volume should be attached with screws, and all fixation points should be used. The length of fixing depends on the wall surface thickness; an adequate fixing length should consid-

BLEAUSTONE ered. Care should be taken not to use impact drivers or excessive force when fixing these products. Summary Inspired by the problem Cortomaltese from Bas Cuvier in Fontainebleau, a great centre-piece hold, perfect for creative route setting and extremely versatile - a true classic, created in the traditional Bleaustone style - to perfection.

20 o tufa d mon T M Mestone LI

BLEAUSTONE TM LIMESTONETM LIMESTONE

LIMestoneTM mini crimps LIMestoneTM crimps BLEAUSTONE

Structure: 10S Structure: 20 S/M Depth of the bolt hole (mm): 18,19,20,21,23X5 Depth of the bolt hole (mm): 11,13,14,19,20X16 KEY FEATURES: The Mini Crimp concept brings a high number of excellent KEY FEATURES: The introduction of this new concept into the Bleaustone positive and technical holds, with the smallest of footprints to the series. The series means we’ve broadened the spectrum of size vs. positivity. set will help put route-setting standards onto the next level and allow you to This set of 10 new Limestone Incut CrimpsTM are exactly what you’d expect be more creative when used along side other sets within the series. them to be -Like crimps that you find on roofs, be it from a water-borne cave Even though these holds are small, they have been designed to maximise or a steep overhang. The only difference being is that they are a lot more strength, whilst keeping the hold compact. Each hold has a screw hole to comfortable to hold! The size of the crimp edge varies between the lengths of secure them should you wish to do so. one fingertip to one-and-a-half fingertips. The radii of which are such that they allow the finger joints to naturally roll over the hold optimizing the grip and comfort. They have been designed to accept all four fingers. Another feature of these holds is that they have thumb-specific parts, which with creative route setting can bring this part into play by adjusting the holds orientation in-route. They also have two screw holes dedicated for more precise positioning e.g. competition route setting.

21 LIMestoneTM incut crimps

Structure: 10 S/M Depth of the bolt hole (mm): 11,13,14,17X7 KEY FEATURES: The introduction of this new concept into the Bleaustone series means we’ve broadened the spectrum of size vs. positivity.

TM This set of 10 new Limestone Incut CrimpsTM are exactly what you’d expect them to be -Like crimps that you find on roofs, be it from a water-borne cave or a steep over- hang. The only difference being is that they are a lot more comfortable to hold! The size of the crimp edge varies between the lengths of one fingertip to one-and-a-half fingertips. The radii of which are such that they allow the finger joints to naturally roll over the hold optimizing the grip and comfort. They have been designed to accept all four fingers. Another feature of these holds is that they have thumb-specific parts, which with

LIMESTONE creative route setting can bring this part into play by adjusting the holds orientation in-route. They also have two screw holes dedicated for more precise positioning e.g. competi- tion route setting.

LIMestoneTM mini edges LIMestoneTM edges BLEAUSTONE

Structure: 10XL Structure: 10XL Depth of the bolt hole (mm): 14,15,19,20,22,30X5 Depth of the bolt hole (mm): 24,25,30, 33,40,46X5 KEY FEATURES: Edges on limestone are extremely common. Edges exist all KEY FEATURES: This set of 10 Edges contains all the features of the lime- over the limestone crag wall and come in all varieties. In designing this set, the stone we studied that we wanted to express. This stylizing of the texture and theme of the textures we wanted to express all feature within this line. flow of the rock gives rise to an extremely functional set of holds. These 10 mini edges have been designed so both hands can hold them, how- An Edge, by Bleaustone’s definition, is a large hold that can be held with two ever only partly by the other hand, where in-route a tricky hand-swap maybe hands easily. Because of the nature of limestone is multifaceted, incorporating desired. They are all fairly positive, so on steeper walls make great routes for this into the stylising means that when adjusting the orientation hold by the beginner/intermediate climbers. They also have two screw holes dedicated smallest amount in route-setting will yield a different personality from each for more precise positioning e.g. competition route setting. hold. This drastically improves the holds usability and value for money. It is unlikely that neither route setter nor climber would tire from using these holds. They also have incorporated into the design two screw holes dedicated for more precise positioning e.g. competition route setting.

22 LIMestoneTM nano jugs LIMestoneTM mini jugs

Structure: 20S Structure: 20M Depth of the bolt hole (mm): 17,18,19,20,25,26X15 Depth of the bolt hole (mm): 14,16,18,20,24X16 KEY FEATURES: The Nano Jug is the smallest jug within the Bleaustone KEY FEATURES: These 20 Mini jugs carry all the features of the limestone style Series. Having the smallest footprint of all jugs, yet still having high positivity. seen throughout the new limestone range and puts it into a new and unique form.

Because of the small footprint they can be put on poorly designed resin climb- They vary from other mini jugs within the series, offering subtle changes to the way TM ing walls. Each hold is designed with anti-rotation in mind; Ensuring the hold’s they are held, improving comfort, hand position and positivity. footprint is big enough so the maximum moment that can be applied is less They have a small enough footprint to be put on poorly designed resin walls. Each than the force required to rotate the hold -by having sufficient friction beneath hold is designed with anti-rotation in mind; Ensuring the hold’s footprint is big enough it. They also have a screw hole to secure them should you wish to do so. so the maximum moment that can be applied is less than the force required to rotate the hold -by having sufficient friction beneath it. They also have a screw hole to secure them should you wish to do so. Mini jugs are the most popular selling holds throughout the Bleaustone Series, and

are the cornerstone of any route on a climbing wall. LIMESTONE

LIMestoneTM super jugs LIMestoneTM jugs BLEAUSTONE

Structure: 10L Structure: 20M Depth of the bolt hole (mm): 20,22,24,26,32X6 Depth of the bolt hole (mm): 19,24,26,27,35,36X15 KEY FEATURES: The infamous Bleaustone Super Jug is probably the world’s most KEY FEATURES: These 20 Jugs carry all the features of the limestone style seen functional jug available. It is perfect for beginners from slabs to overhangs. It remains throughout the new limestone range and puts it into a new and unique form. They positive on a +90 degree (horizontal) roof and ergonomic throughout all wall angles. vary from other Jugs within the Bleaustone series, offering subtle changes to the way This set of 10 Limestone Super Jug pushes that one step further. We have changed they are held, improving comfort, hand position and positivity. the jug edge making them feel a little more secure on really steep ground. Some of Each hold is designed with anti-rotation in mind; Ensuring the hold’s footprint is big the holds have a small foothold featured so they aid in route setting -so to avoid the enough so the maximum moment that can be applied is less than the force required use of a separate foothold. The texture and style explores new features studied on to rotate the hold -by having sufficient friction beneath it. They also have a screw limestone seen throughout the new range -Being both aesthetically and ergonomi- hole to secure them should you wish to do so. cally pleasing these limestone jugs will be a real joy to climb on. Jugs are one of the most popular selling holds throughout the Bleaustone Series, and Each hold is designed with anti-rotation in mind; Ensuring the footprint is big enough are the cornerstone of any route on a climbing wall. so the maximum moment applied is less than the force required to rotate the hold -by having sufficient friction beneath it. They also have a screw hole to secure them should you wish to do so.

23 LIMestoneTM mondo jugs LIMestoneTM footholds

Structure: 10XXL Structure: 10footholds Depth of the bolt hole (mm): 10,28,34,36X7 Depth of the bolt hole (mm): 15,17,18,19,20,21X5 KEY FEATURES: The word ‘Mondo’ is meant to imply something big. Before these KEY FEATURES: This Set of 20 Footholds has been designed with longevity new limestone Mondo Jugs came along, our biggest set of Mondo jugs were undoubt- and strength in mind. They are perfect to set all grades of routes on all

TM edly the Fontainebleau Mondo jugs. wall-angles. These Limestone Mondo Jugs are truly big! In studying many rock types over the years, one thing that makes designing holds difficult is the shear size of the features you see on real rock -creating holds that mimic the real size and feel of the features is somewhat economically non-viable. Here we are pushing the boundaries in creating this set to try and give you a real feel for climbing on the limestone rock we studied and now stylized. The set incorporates many fundamentals found throughout the Mondo jug families:

LIMESTONE Easily dual handed, Ergonomic, Positive on horizontal (+90 degree) overhangs and extremely aesthetically pleasing! These holds will be an excellent eye catcher and conversation piece in any climbing gym. Each hold is designed with anti-rotation in mind; Ensuring the footprint is big enough so the maximum moment applied is less than the force required to rotate the hold -by having sufficient friction beneath it. They also have a screw hole to secure them should you wish to do so. BLEAUSTONE LIMestoneTM tufa screw-on LIMestoneTM screw-ons

Structure: 5XS 5S Structure: 30XS Depth of the bolt hole (mm): 5,8,9,10,12,14X6 Depth of the bolt hole (mm): 3,4,5,6,16X26 KEY FEATURES: Tufas are the lines you see on many limestone cliffs, KEY FEATURES: This set of 30 screw-ons allows for more setting options formed from thousands of years of water-deposited minerals. This set mimics when used along side other sets within the range. They can be used as techni- the smaller lines and ribs you see. Great as technical crimps, pinches, long cal handholds, or as technical footholds. extended footholds and edges.

24 LIMestoneTM pinches LIMestoneTM pockets

Structure: 10L Structure: 10L Depth of the bolt hole (mm): 21,22,25,33,41X6 Depth of the bolt hole (mm): 19, 27,31,33,35,39,46X4 KEY FEATURES: The most common and enjoyable feature that you pinch on lime- KEY FEATURES: The tufas we find on our limestone areas that we have stylized stone has to be tufa-like features, they come in all sizes and is a usually a thin line of throughout the limestone range feature heavily within this set. It is common to find

rock formed on the surface of a limestone wall by hundreds of years of water running pockets hidden behind or amongst the tufas and that was one of the inspirations in TM down the face depositing calcite, for shear climbing pleasure! designing this set. With this set of pinches we took away the hundreds of years, and designed a set of The set of 10 2/3 finger pockets are positive and will accept in depth two finger joints, holds mimicking these tufas. The design is somewhat stylized, but is representative and depending on finger size, up to 3 fingers in width. Comfort has been one priority in of the feeling you get when climbing on them. The set of 10 pinches are generally designing the set, whilst trying to maintain aspects of the limestone that we climbed positive, and vary in pinch width, angle, and finger-to-thumb height, that is, the on. height from the wall surface to the thumb in relation to the fingers varies i.e. not all You will see some classic Bleaustone design features within this pocket set, especially the pinches are such that you would pinch them like a lobster! The aspect in changing with the double-handed pockets. They also have two screw holes dedicated for more

the pinch hand position, in relation to the wall, will undoubtedly aid route setting precise positioning e.g. competition route setting. LIMESTONE creativity, training, and the overall feeling of the climb on-route. They also have two screw holes dedicated for more precise positioning e.g. competi- tion route setting.

LIMestoneTM tufa BLEAUSTONE Structure: 2 Depth of the bolt hole (mm): 40, 91 KEY FEATURES: With the recent addition of the new 2012 Limestone range comes our first set of limestone TufasTM. One of the Tufas is juggy along it’s length, and one is a pinch varying in positivity. They can be put end to end, or side by side, so as to form a crack along the length. Each Tufa has 4 screw-holes and one bolt-hole. It is recommended that if the bolt-hole is used then a screw-hole should also be used to affix the hold to the climbing wall. The appearance of these Tufas on any surface in your wall will be a great eye catcher and feature of any route. They are approximately 66cm in length.

LIMestoneTM mondo tufa

Structure: 1 KEY FEATURES: - Long (circa. 66cm) Positive jug-like tufa and Pinch-like tufa - Can be positioned side by side to for an intricate crack or end to end - Great for all grade of route and level of climber - Ideal for creating eye-catching centerpiece routes in your gym - Each has 1 bolt hole and 4 screw holes

25 BLEAUSTONE gritstone pinch arete gritstone gritstone

BLEAUSTONE gritstone CRIMPS gritstone EDGES

Structure: 5S, 15M Structure: 2L, 8XL Depth of the bolt hole (mm): 15,19,20,21,22,23,24,28X13 Depth of the bolt hole (mm): 32,34,36,40,41,45X2,48, 51X2 KEY FEATURES: The gritstone crimps include 20 small to medium holds. KEY FEATURES: With 10 L to XXL holds, the Gritstone Edges incorporate the They have been inspired by real holds that exist in the UK’s Peak District from real experience of climbing in the peak district. Any Veteren of the Peaks will some of the most famous routes. The wide variety of Gritstone that appears find a similar hold that he/she has exerienced in this range. With the subtle use in the peaks has been recreated to the finest detail and incorporated into the of pebbles both aesthetically and functionally, when rotated, the holds can be holds both functionally and aesthetically. used in an extrmely wide variety of interesting ways, giving multiple edges on You will find that most of the holds are quite positive with a small selection which to climb giving you many options for the style of route you can create. being fairly technical.

26 gritstone mini jugs gritstone jugs

Structure: 10S Structure: 20M Depth of the bolt hole (mm):25,26,29,32,33X6 Depth of the bolt hole (mm): 17, 22,24,25,26,28,31,32,37X11 KEY FEATURES: KEY FEATURES: With these 20 Jugs, the Gritstone style has been incorporated - Route setters workhorse product – essential for every climbing gym more aesthetically than functionally. The most important aspect of the jug, the hold - Small positive jugs (2-3 Finger joints) itself, has been preserved to be extremely ergonomically comfortable when climbing. - Ideal for all wall angle, but a real challenge on really steep routes >60 degrees These jugs are a great addition to the Gritstone Range and allow for easier routes on - Perfect for all grades of route steeper ground. On some holds, pebbles have been used as a potential feature-foot- hold opposite to the hold itself. gritstone gritstone flat jugs gritstone mondo jugs BLEAUSTONE

Structure: 3L/7XL Depth of the bolt hole (mm): 30, 34X2, 36X7 KEY FEATURES: This is a Brand-New Hold concept that was introduced in 2012 (Fontainebleau Flat jugs). The flat jug has been hold as the bridge between a Jug and Structure: 2L 8XL edge and has been design to make climbing a bit more challenging for the beginner Depth of the bolt hole (mm): 36,38,39,40, 44X2, 45X2, 46X2 or advanced climber. KEY FEATURES: As with the Gritstone Jugs, the Mondo jugs have been designed The Flat Jug limits how high you can move between holds, this is because the hand more ergonomically, with the gritstone style used more aesthetically. Both hands can is forced open the higher you move above the hold. Once in the hand of a competent be used at once with these holds, and are, in most cases, the most comfortable and route setter he/she will see the benefits when creating routes more challenging for positive Mondo Jugs in the whole series. the beginner climber and advanced climber. To give you an idea, when set on a wall of 15 Degrees, the hold surface would be approximately parallel to the ground. When they are set on steeper wall angles, they become a lot harder to hold than a standard Jug. The Gritstone Flat jugs are slightly less positive that the Fontainebleau Flat jugs, and have a more rounded feel to them; what you would expect from climbing on grit.

27 gritstone footholds gritstone specials

Structure: 10Footholds Structure: 2S, 8M Depth of the bolt hole (mm): 15,17,18,19X7 Depth of the bolt hole (mm): 9,17,19,20,21,23,30,31,34X2 KEY FEATURES: The gritstone footholds are some of the most important holds KEY FEATURES: The specials are a set of holds that take the most inter- you can have on your wall accompanying the other sets within the gritstone range. esting aspects of a rocks features and subtleties and use them to inspire the They will allow you to use larger holds from the range to create more routes and also shapes. The idea behind these sets are to add interest to your routes, whether incorporate more the use of foot work technique. the holds are used as footholds, or as tricky hand-holds. Ideal for competitions, used on plywood macro features, either as Screw-ons or bolt-ons - these specials incorporate both options. In this set of 10, Pebbles, Bullet wounds, Rugosities, the unusual foot placements on Ben’s Wall (Curbar), Small uncom- promising pockets found on slabby walls, and subtle lines found on the grit have been the source of inspiration in creating the Gritstone specials line. gritstone BLEAUSTONE gritstone pinches gritstone pockets

Structure: 2M, 8L Structure: 5M, 5L Depth of the bolt hole (mm): 33, 43,46x2, 55,58,67X4 Depth of the bolt hole (mm): 14,26,28,29,42,46,47X4 KEY FEATURES: The 10 Gritstone Pinches also include Keel type holds, like KEY FEATURES: Routes like Banana finger, The Terrace, Poc Man, and Ben’s those found at Burbage, or like in Yorkshire “the keel”. The pinches found in wall feature in this set of 10 Pockets - inkeeping with the ergonomic standards the peaks tend to be quite open, and rely on friction a lot - the new foam used of bleaustone. The set will be a great addition to any of the other sets in the for carving in the gritstone range, has an excellent surface giving optimum gritstone range. friction. Pebbles do feature in this set, and have been carefully selected to enhance the climbing experience.

28 gritstone mini slopers gritstone slopers

Structure: 2M, 8L Structure: 2L, 8XL Depth of the bolt hole (mm): 25,29,30,31X2,32 Depth of the bolt hole (mm): 40,45,47,59,68,69,71,73,82,89 KEY FEATURES: KEY FEATURES: - Designed with a certain style of climbing in mind; balance and technique. - Inspired by the whole feel of climbing on gritstone - Gritstone texture fully employed on the climbing hold surface. - Largest slopers in the whole series - Grip options will subtly vary depending on the rotation - Feature two low-profile slopers ideal for open-handed sloper strength - Great for affixing to features or other volumes - Subtle gritstone features and pebbles mimic the feel of the rock - Ideal for more challenging routes that require balance and technique and - Ideal for challenging routes, and the upper grades good use of friction gritstone gritstone xxxl gritstone the nose BLEAUSTONE

Structure: 4XXXL Structure: 1 Depth of the bolt hole (mm): 55,61,62,63 KEY FEATURES: KEY FEATURES: This is a Brand-New Hold concept that was introduced in 2012 - Hand-carved Gritstone Volume inspired by many problems found in the Peak (Fontainebleau Flat jugs). The flat jug has been hold as the bridge between a Jug and District edge and has been design to make climbing a bit more challenging for the beginner - True-to-Life Pebble clusters aiding climbing when rotated in certain positions or advanced climber. - Has many grip options including wide, open-handed pinches, slopers, crimps The Flat Jug limits how high you can move between holds, this is because the hand and small edges is forced open the higher you move above the hold. Once in the hand of a competent - Should be fixed with screws, all fixation points should be used route setter he/she will see the benefits when creating routes more challenging for the beginner climber and advanced climber. To give you an idea, when set on a wall of 15 Degrees, the hold surface would be approximately parallel to the ground. When they are set on steeper wall angles, they become a lot harder to hold than a standard Jug. The Gritstone Flat jugs are slightly less positive that the Fontainebleau Flat jugs, and have a more rounded feel to them; what you would expect from climbing on grit.

29 Gritstone arete pinch

Structure: 1 KEY FEATURES: - Inspired by problems that require pinch strength on arêtes - Feature small open-handed crimp like featured as well as a multitude of pinch style - Features small pebbles that aid the climbers grip - Fixed with screws only; all fixation points should be used - Do not use impact drivers to affix mini volumes

Gritstone edge gritstone

BLEAUSTONE Structure: 1 KEY FEATURES: - Inspired by the sedimentary layers found on gritstone where there can be many grip options available - Nice rounded edges make climbing free-flowing and enjoyable on this mini volume - Multifunctional product with a wide variety of grip option - Fixed with screws only; all fixation points should be used. - Do not use impact drivers to affix mini volumes

Gritstone ledge

Structure: 1 KEY FEATURES: - Inspired by many ledges you find in the Peak district, where you might be placing gear, or just having a rest. - Features a hidden crimp, along with the typical rounded slopers found on the grit - Many grip options depending on how the product is rotated - Fixed with screws only; all fixation points should be used. - Do not use impact drivers to affix mini volumes

30 Gritstone arete

Structure: KEY FEATURES: - Inspired by countless arêtes found in the Peak District - Helps develops Open-handed and sloper strength - Ideal for walls between 5 and 15 degrees over hanging - Pebbles feature aiding the climber - Fixed with screws only, all fixation points should be used - Do not use impact drivers to affix the screws gritstone BLEAUSTONE

31 BLEAUSTONE grANITE granite crimps granite mini edges

Structure: 10 s Structure: 10 l Depth of the bolt hole (mm): 15,21,23,24,26,27,28,28,28,28 Depth of the bolt hole (mm): 29,29,30,31,32,36,43,43, 44,44

granite KEY FEATURES: KEY FEATURES:

gritstone • 10 holds in a set • 10 holds in a set • Size-wise the jug accepts full fingers • Size-wise can accept one full hand and part of another. • Positive on roofs up to 90 deg, Perfect for easier routes • Positive on roofs up to 30 degrees • Great for beginners, and intermediate climbers on steeper ground • Great for beginners progressing to intermediate grades • 1 extra screw holes for anti-rotation • Perfect clipping hold, zaps the last bit of energy from the climber! • 1 extra screw holes for anti-rotation BLEAUSTONE BLEAUSTONE granite edges granite positive edges

Structure: 10XL Structure: 10XL Depth of the bolt hole (mm): 32,42,42,46,49X6 Depth of the bolt hole (mm): 40,42,43,48,51X6 KEY FEATURES: KEY FEATURES: • 5 holds in a set • 10 holds in a set • Size-wise can accept two full hands with options for repositioning either hand • 2/3 finger pockets, some can accept both hands simultaneously • Multi-functional; can be used from all sides to vary difficulty/positivity • Rotated about the bolt hole will open up multiple grip options • 2/5 Positive on roofs, the others are great for interesting challenging routes • Varied positivity and technicality • Good for easy technical routes on less steep ground • Great for all grades of routes • 3 extra screw holes for more positioning options • 2/3 extra screw holes for more positioning options

32 granite mini slopers granite slopers

Structure: 10M Structure: 10XL Depth of the bolt hole (mm): 26,27,30,31,32,34,35,35,36,37 Depth of the bolt hole (mm): 37,41,42,42X6

KEY FEATURES: KEY FEATURES: granite • 10 holds in a set • 10 holds in a set • Size-wise the jug accepts full fingers • Size-wise can accept one full hand and part of another. • Positive on roofs up to 90 deg, Perfect for easier routes • Positive on roofs up to 30 degrees • Great for beginners, and intermediate climbers on steeper ground • Great for beginners progressing to intermediate grades • 1 extra screw holes for anti-rotation • Perfect clipping hold, zaps the last bit of energy from the climber! • 1 extra screw holes for anti-rotation BLEAUSTONE granite screw-ons granite xxxl

Structure: 10XS KEY FEATURES: Depth of the bolt hole (mm): 11,11,12,13,21,21,21,21,21,21 - Granite mini volume is extremely positive along one side mimicking roof jugs KEY FEATURES: found on granite • 5 holds in a set - Beautifully carved, and comfortable to hold making it a pleasure to climb on • Size-wise can accept two full hands with options for repositioning either hand - Ideal for all wall angles for all level of climber • Multi-functional; can be used from all sides to vary difficulty/positivity - Fixed to the wall with screws only • 2/5 Positive on roofs, the others are great for interesting challenging routes • Good for easy technical routes on less steep ground • 3 extra screw holes for more positioning options

33 BLEAUSTONE CLASSIC classic crimps classic mini edges

Structure: 10 s Structure: 10 l Depth of the bolt hole (mm): 15X2,18X2,20,22,24X2,25X2 Depth of the bolt hole (mm): 17,18X2,20X2,21X2,22X2,24

classic KEY FEATURES: KEY FEATURES: - More technically natured crimps, offering huge variety of grip option and • 10 holds in a set challenging features • Size-wise can accept one full hand and part of another. - Perfect for all routes, but great for more challenging routes • Positive on roofs up to 30 degrees - Ideal for all wall angles and level of climber • Great for beginners progressing to intermediate grades - Varied positivity per finger depending on what hand is used • Perfect clipping hold, zaps the last bit of energy from the climber! - Extra screw holes for more positioning options • 1 extra screw holes for anti-rotation BLEAUSTONE classic edges classic nano jugs

Structure: 10XL Structure: 20S Depth of the bolt hole (mm): 43,44X,45,46X2,47,49,55,60 Depth of the bolt hole (mm): 11,13,15,17,19,21X15 KEY FEATURES: This is a brand-new set of edges introduced within the classic KEY FEATURES: According to the Bleaustone book of climbing holds range. This set of 10 holds have been designed with the flavor of the previous classic Vol. II a Nano jug is a small positive hold designed for walls greater than 30 texture but now explore the relationship between flowing lines, curves and shadows. degrees over-hanging. This set consists of 8 left-handed, 8 right-handed and 4 The difficulty of the holds vary, some are very positive, while some will be more dual-handed holds making up the 20, they also feature small positive crimps challenging to hold, giving the route setter much to choose from when making a new opposite the jug to allow for more intricate route setting when combined with route, but are more likely to be seen in the upper grades on steeper ground. Most are other holds in the Bleaustone series. positive up to a 30 degree wall angles. Each hold has at least two additional screw holes (9/10 have three) as well as the main bolt-hole. This allows for more options with positioning the hold, ideal for competitions or high-level routes.

34 classic mini jugs classic super jugs

Structure: 10 s Structure: 10 m Depth of the bolt hole (mm): 12,14,17,18X7 Depth of the bolt hole (mm): 19,24,25,28,32,35X5

KEY FEATURES: The mini-version of the classic jug set and an excellent ad- KEY FEATURES: Super jugs are the most positive, comfortable single-hand- classic dition also. Used on steeper grounds, these mini-jugs can make moves slightly ed holds in the range. They are designed for ALL wall angles up to and over harder, ideal for the crux. roofs. The set consists of 4 right-handed, 4 left-handed and 2 dual-handed holds that make up the 10. As with most newly designed jugs, they also feature a small positive crimp opposite the jug, aiding foot placements or more intri- cate route setting. They are a must for any climbing gym that would otherwise be naked without them. BLEAUSTONE classic jugs classic mondo jugs

Structure: 5S, 15M Structure: 10XL Depth of the bolt hole (mm): 11, 16, 19, 25, 27, 29X15 Depth of the bolt hole (mm): 25,30X3, 32X2, 38X4 KEY FEATURES: KEY FEATURES: These brand-new Mondo jugs boast many features that • Exhibiting all the hallmarks of our classic design; smooth curves, and simple allow for easier routes to be set on seriously steep ground. With each jug lines. These stylish holds are amongst the most popular of the classic range. allowing both hands to be placed on them, they will even feel positive on roofs • For all abilities of climber, especially beginners; perfect for warm-up routes. and also incorporate foot jibs/mini jugs so when you move past them, you have • An excellent addition when used with the other holds in the range. something positive to put your foot on. The whole concept of a jug has been • Positive holds for the steepest of angles; these holds can be used anywhere. redesigned in this set so whilst weight is minimized, positivity is maximized. These jugs have been designed for ALL angle of wall and are among the most ergonomic holds ever designed by Bleaustone.

35 classic threads

Structure: 2L 3XL Depth of the bolt hole (mm): 28,33,42X2, 43 KEY FEATURES: This new set of threads have been completely redesigned with single threads now featuring a dual-handed concept. This means that the three single threads have an incorporated jug which can be used with a second left/right hand or as a foot hold when on steeper ground, such as a roof. This also means easier routes can be set with fewer holds. The ergonomics of the thread has also been drastically improved now making it easier for those with smaller hands to get the most out of them. CAUTION: The extra screw hole on the holds should ALWAYS be used without exception. Bleaustone shall not be liable for any break- ages that result with holds being affixed without this extra screw hole.

classic Bolt-on Footholds classic Mondo Footholds classic

Structure: 10footholds Structure: 10footholds Depth of the bolt hole (mm): 19,19,23,26X7 Depth of the bolt hole (mm): 8,9,11X8 KEY FEATURES: The demand for this type of set came from the fact that route KEY FEATURES: This set of 10 is an invaluable appendage to any route setters had a tendency in the past to use nano jugs or similar holds for feet in a route. setter’s bucket This set has the basic shape and size of a nano jug, but has additional features ideal

BLEAUSTONE for setting for feet. This hold is the climbing gym’s workhorse. Perfect for all types of routes, and setting. Each hold will vary how positive it is to the climber when rotated around 360 degrees. So as a route is being set you can immediately decide how easy or hard to make a move off of the foothold with a simple rotation. The Classic Mondo classic screw-ons Footholds are Ideal for all wall angles and level of route. The bolt-hole depth has been optimized so the hold is as strong as possible to give you the maximum service life. classic pinches

Structure: 20S Depth of the bolt hole (mm): 2,3,6,8,9,14X15 KEY FEATURES: Ideal For general purpose training, where foot technique is Structure: 10l essential. The smooth curves and simple lines of this set are consistent with Depth of the bolt hole (mm): 33,34X3,35,41,42,44X3 the Classic range. KEY FEATURES: - Continuation of the theme of flowing lines and grip options - The texture allows for a multitude of pinches available depending on how the hold is positions - Positive on wall angles up to 45 degrees - Ideal for all level of climber - Extra screw holes for more positioning options 36 classic pockets classic slopers

Structure: 5M, 5L Structure: 5L, 5XL Depth of the bolt hole (mm): 13, 17, 19,20,21X6 Depth of the bolt hole (mm): 42,50,56,60,67,70,72,73X3 KEY FEATURES: “The nicest pockets you’ll ever encounter...” Being pockets KEY FEATURES: Like all of our slopers, this classic set comes surface hard- they require a little more accuracy between moves. This set works well on any ened so the friction is life-long and will outlast any standard sloper. wall from slabs to overhangs. The classic slopers, like many of our shapes, are made with a flush bolthole. With no hole available for a cheeky thumb or finger, these holds have to be climbed the way it was intended. classic INCUT CRIMPS classic BLEAUSTONE

Structure: 10s Depth of the bolt hole (mm): 20,25,28X2,30,31,33,,34,35,45 KEY FEATURES: - The most ideal crimps for the steepest parts of your wall - Positive on fully overhanging walls (one fingertip length incut) - Suitable for all grades of route, comfortable even on vertical walls - Ideal for pushing the grades of all climbers - Extra screw holes for more positioning options on wooden walls

37 BLEAUSTONE training range training Flat (0) Crimps training In-cut (60) Crimps

Structure: 6S Structure: 8M Depth of the bolt hole (mm): 18,18,18,18,21,21 Depth of the bolt hole (mm): 24,23,25,25,25,25 KEY FEATURES: The flat crimps are the most technically challenging of the KEY FEATURES: The in-cut crimps are the most positive crimps in the range. crimps in the range. Designed so that the crimp’s edge is perfectly perpendicu- They offer an extremely positive edge on wall angles between 30 and 60 lar to the wall’s surface. degrees, beyond this they can be used on roofs, but will be more challenging. Ideal for vertical walls (0 degrees) on walls greater than 15 degrees will be- There are two central holds: one with a concave profile, the other with a convex come more difficult - making them ideal for training crucial crimp-strength. profile: Two left and two right-handed holds, marked L and R, respectively. There are two central holds: one with a concave profile, the other with a convex They can be either bolted or screwed on to the climbing wall. training range training profile: Two left and two right-handed holds, marked L and R, respectively. They can be either bolted or screwed on to the climbing wall.

training Postive (30) crimps training Warm-up (45) jugs BLEAUSTONE

Structure: 8M Structure: 6M Depth of the bolt hole (mm): 22,22,22,22,23,22“ Depth of the bolt hole (mm): 26,26,26,26,25,25 KEY FEATURES: These crimps are exactly what the title says; Positive. Perfect on KEY FEATURES: These warm-up jugs have been designed to be as comfort- wall angles up to 30 degrees. Beyond this, the hold will no longer be positive, and able and as positive as possible reducing the amount of strain on the fingers ideal for more challenging routes on steeper ground. and hands during that all-important warm-up. There are two central holds: one with a concave profile, the other with a convex These jugs have 2 left and 2 right-handed jugs with 2 identical central holds, for profile: Two left and two right-handed holds, marked L and R, respectively. use with either hand. The left and right holds are marked L and R respectively. They can be either bolted or screwed on to the climbing wall. They are ideal for all wall angles up to 45 degrees. Above this are still useable for most intermediate climbers, but require more strength. They can be either bolted or screwed on to the climbing wall.

38 training LP (0) Flat Pinches training HP (0) Flat Pinches

Structure: 6M Structure: 6M Depth of the bolt hole (mm): 28,28,28,34,34,34 Depth of the bolt hole (mm): 41,41,43,43,44X2 KEY FEATURES: The pinches have been designed alongside the others in the KEY FEATURES: The pinches have been designed alongside the others in the range to offer exceptional variety for helping improve pinch strength; not only range to offer exceptional variety for helping improve pinch strength; not only do they vary in width, but also vary in depth. do they vary in width, but also vary in depth. The pinches in this set have a low-profile, making them to hardest to hold The pinches in this set have a high-profile, allowing two phalanges of the fin- allowing only one phalange of the fingers to grasp them. The pinches are gers to grasp them. The pinches are approximately 40mm, 60mm, and 80mm approximately 40mm, 60mm, and 80mm in width at the narrowest point. in width at the narrowest point. The flat pinches are the most demanding of pinches, with the edge being The flat pinches are the most demanding of pinches, with the edge being perpendicular to the wall surface. As for the wall angle, this depends on your perpendicular to the wall surface. As for the wall angle, this depends on your pinch strength. Ideally 0-15 degrees is best for intermediate climbing. pinch strength. Ideally 0-15 degrees is best for intermediate climbing. range training They can be either bolted or screwed on to the climbing wall. They can be either bolted or screwed on to the climbing wall. training LP (30) Positive Pinches training HP (30) Positive Pinches BLEAUSTONE

Structure: 6m Structure: 6M Depth of the bolt hole (mm): 25,25,28,28,31,31 Depth of the bolt hole (mm): 43,43,43,42,42,42 KEY FEATURES: The pinches have been designed to offer exceptional KEY FEATURES: The pinches have been designed to offer exceptional variety for helping improve pinch strength; not only do they vary in width, they variety for helping improve pinch strength; not only do they vary in width, they also vary in depth. also vary in depth. The pinches in this set have a low-profile, allowing only one phalange of the The pinches in this set have a high-profile, allowing two phalanges of the fin- fingers to grasp them. The pinches are approximately 40mm, 60mm, and gers to grasp them. The pinches are approximately 40mm, 60mm, and 80mm 80mm in width at the narrowest point. in width at the narrowest point. The positive pinches are exactly what the title says - positive. Designed to be The positive pinches are exactly what the title says - positive. Designed to be positive up to wall angles of 30 degrees. Beyond this, they will certainly help positive up to wall angles of 30 degrees. Beyond this, they will certainly help develop that vital pinch strength. develop that vital pinch strength. They can be either bolted or screwed on to the climbing wall. They can be either bolted or screwed on to the climbing wall.

39 training + 30 degree Pockets training Dual (15/30) Slopers

Structure: 6M Structure: 4M, 2L Depth of the bolt hole (mm): 25,25,25,25,25,25 Depth of the bolt hole (mm): 52,52,52,52,44,44 KEY FEATURES: The whole idea of a pocket is to force a climber to hold it open-handed. These +30º Pockets are ideal for training on steeper boards to improve pocket strength and will help develop pocket strength on flatter-less steep boards. Again, having a super-friendly radii these pockets, even the mono, wont feel like it’s attacking your tendons, and each hold is paired so you can easily set up a symmetrical system board.

training Symmetrics Compact training board

training range training Structure: 1XL Depth of the bolt hole (mm): 20 - 25 KEY FEATURES: Designed with one-armed deadhangs in mind, the CompactBoard has been kept narrow to allow the climber to stay as central as possible within the doorframe during passive and active hangs. The symmetrical nature and progression Structure: 20XS of small holds also permits effective two handed training for beginner and inter- Depth of the bolt hole (mm): 10X4 ,12X6,14X10 mediate climbers to help work towards one armed deadhangs at a later date. The KEY FEATURES: The symmetrics are the hardest set of training edges in the series. CompactBoard has the following features:

BLEAUSTONE Each of 10 has a left/ right-hand partner. The set enables interesting problems to · 1 x Central positive cling crimp - specifically designed for one-armed pull-ups. be created and mirrored allowing the climber to identify their weaknesses and thus · 2 x Small flat crimps / medium three finger open holds. work on them - a step forward from conventional training-system training. · 2 x Small open hand / sloping crimps. · 1 x Hard central sloper (can be matched & half crimped). · 2 x Medium cling grips / large open hand. · Narrow width to keep the climber away from the doorframe. · Progressive hold sizing to challenge and vary deadhangs. · Super smooth BleauStone texture to minimise skin wear whilst maintaining friction - sore skin is no longer a limiting factor.

long training board

Structure: >XXXL Depth of the bolt hole (mm): 45 - 55 KEY FEATURES: These crimps are exactly what the title says; Positive. Perfect on wall angles up to 30 degrees. Beyond this, the hold will no longer be positive, and ideal for more challenging routes on steeper ground. There are two central holds: one with a concave profile, the other with a convex profile: Two left and two right-handed holds, marked L and R, respectively. They can be either bolted or screwed on to the climbing wall.

40 41 Variety of grip options and positivity OF Bleaustone climbing holds

42 variety of grip options and positivity and options grip of variety

43 photo byluka fonda 44 aptaiin CRU X C

45 captain crux 100 traditional

100 Überdruck 101 Malocher

X 100 Structure: 10m Structure: 10m Depth of the bolt hole (mm): 19X2,20X2,22,24X3,30X1 Depth of the bolt hole (mm): 16X3,17X3,20,21,25,27

102 Lochdetektor 103 Moloch aptaiin CRU C

Structure: 10m Structure: 5l Depth of the bolt hole (mm): 12,14X2,15,17X2,18X3,19 Depth of the bolt hole (mm): 17X2,18X2,23

104 kellen 105 Alpenglühen

Structure: 10m Structure: 10m Depth of the bolt hole (mm): 18X2,20X4,21X2,25 Depth of the bolt hole (mm): 19X220X6,21X2 46 106 Baggersee 107 Jagdfieber

Structure: 10m Structure: 10m Depth of the bolt hole (mm): 19,20X2,22X3,24X2,32,35 Depth of the bolt hole (mm): 17,19,20,21,23X2,27X2,29,33 108 Zapfenstreich 109 Lutscher

Structure: 10L Structure: 10m X 100 Depth of the bolt hole (mm): 28,31,34X3,35,36X2,38,44 Depth of the bolt hole (mm): 17,18,20X2,21,24X3,25,29

110 Radio Neandertal 111 Hau rein! aptaiin CRU C

Structure: 10m Structure: 10m Depth of the bolt hole (mm): 20,22,23X2,24X,26,27,30X2 Depth of the bolt hole (mm): 19,20X2,22X2,25X2,26,29

112 Zeit zum Atmen 113 Henkel Trocken

Structure: 10s Structure: 5l Depth of the bolt hole (mm): 11,12X3,13,14,15,16X2,20 Depth of the bolt hole (mm): 20,21,22,26,28 47 114 Affenschauckel 115 Nachbars Lumpi

Structure: 5l Structure: 5l Depth of the bolt hole (mm): 23,24,26,28,31 Depth of the bolt hole (mm): 34X2,37,38,44 116 Land in Sicht 117 Die weisse Spinne

X 100 Structure: 5l Structure: 5xl Depth of the bolt hole (mm): 24,27,30X2,37 Depth of the bolt hole (mm): 11,15,16X2,17

118 Dachschaden 119 Steckdose aptaiin CRU C

Structure: 5XL Structure: 6l Depth of the bolt hole (mm): 15,15,16,17,20 Depth of the bolt hole (mm): 31X6

120 Monokultur 121 A-Loch

Structure: 6l Structure: 6l Depth of the bolt hole (mm): 36X6 Depth of the bolt hole (mm): 32X6 48 122 Duales System 123 Ein FL

Structure: 6L Structure: 6l Depth of the bolt hole (mm): 35X6 Depth of the bolt hole (mm): 34X6 124 Rein damit! 125 Gott ist tot

Structure: 6l Structure: 5xl X 100 Depth of the bolt hole (mm): 36X6 Depth of the bolt hole (mm): 30,31,32,34,36

126 Himmelsleiter 127 Zeitgeist aptaiin CRU C

Structure: 5XL Structure: 5l Depth of the bolt hole (mm): 28X3,32,35 Depth of the bolt hole (mm): 27,28X2,29,30

128 Kolbenfresser 129 Maschinensturm

Structure: 5l Structure: 5xl Depth of the bolt hole (mm): 23,26,28,29,31 Depth of the bolt hole (mm): 31,35,36,40X2 49 130 Abgezockt 131 Gipfeltreffen

Structure: 5xl Structure: 5xl Depth of the bolt hole (mm): 26,32,35,37,40 Depth of the bolt hole (mm): 29X3,31,36 132 Doppelpack 133 Steinschleuder X 100 aptaiin CRU C

Structure: 5xl Structure: 5xl Depth of the bolt hole (mm): 43,45,50,53X3 Depth of the bolt hole (mm): 37,38,41,42,45

134 Dauerbrenner

Structure: 5XL Depth of the bolt hole (mm): 22,28,31,32,35

50 captain crux 300 GRANITE

300 Stellerkrieg 301 Würfelhusten

Structure: 10 M Structure: 10 S Depth of the bolt hole (mm): 13,14,15X3,16X2,17X2,33 Depth of the bolt hole (mm): 11,12X7,13,15

302 Härte 10 303 Volle Kante aptaiin CRU X 300 C

Structure: 10 M Structure: 10 M Depth of the bolt hole (mm): 13.16X2,17X2,18X2,19,20,21 Depth of the bolt hole (mm): 12X2,16X2,17,18X3,22,26

304 Brett 1 305 Standrecht

Structure: 10 L Structure: 20Footholds Depth of the bolt hole (mm): 11X212,13X2,14,15,17,18,19 Depth of the bolt hole (mm): 10,11,12X7,13X5,14X4,15X2 51 306 Scharfes Eck 307 Grobmotorikers Albtraum

Structure: 10 M Structure: 20 Footholds Depth of the bolt hole (mm): 16X3,18X2,19,20,21,22X2 Depth of the bolt hole (mm): 9X3,10X5,11X5,12X2,13X3,14,15 308 Amok 309 Nordkante

Structure: 20 Footholds Structure: 1 Depth of the bolt hole (mm): 11,12XX7,13X5,14XX4,15 Depth of the bolt hole (mm): 78

310 Einstein 312 Zugzwang aptaiin CRU X 300 C

Structure: 1 Structure: 2 XL Depth of the bolt hole (mm): 69 Depth of the bolt hole (mm): 32X2

313 Apokalypse 318 Durchzug

Structure: 1 Structure: 10 XL Depth of the bolt hole (mm): 82 Depth of the bolt hole (mm): 29,30,32,38X2,41X2,42,45,49 52 320 Durchgeknallt

Structure: 10XL Depth of the bolt hole (mm): 19,21,24X2,25,26,27,28,30,35 321 Irrenhaus 322 Fallendes Laub

Structure: 5 Structure: 2 Depth of the bolt hole (mm): 32,37,37,40,41 Depth of the bolt hole (mm): 37,48

323 Rauhfaser 324 Angstbeisser aptaiin CRU X 300 C

Structure: 20 Footholds Structure: 10 L Depth of the bolt hole (mm): 8X2,9X2,10X2,11X5,12X3,13,14X2,15X2 Depth of the bolt hole (mm): 11,16,17,19,20X2,22,24,26

325 Schwalbennest 326 Dru

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 52 Depth of the bolt hole (mm): 72 53 327 Todesbiwak 328 Eigerwand

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 128 Depth of the bolt hole (mm): 69 329 Badile 330 Thor’s Hammer

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 88 Depth of the bolt hole (mm): 70

331 Tafelberg 332 Hunsrückhöh aptaiin CRU X 300 C

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 73 Depth of the bolt hole (mm): 108

333 Odins Tafel 334 Räucherschinken

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 50 Depth of the bolt hole (mm): 88 54 335 Wetterstein 336 Keule

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 61 Depth of the bolt hole (mm): 72 337 Standgericht 338 Vogelsberg aptaiin CRU X 300 C

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 47 Depth of the bolt hole (mm): 55

339 Hockendes Weib 340 Heldwand

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 61 Depth of the bolt hole (mm): 64 55 341 Hängender Stein 342 Glocke

Structure: 10XL Structure: 20S Depth of the bolt hole (mm): 76 Depth of the bolt hole (mm): 55

343 Hackstock 344 Teutonia

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 51 Depth of the bolt hole (mm): 69 aptaiin CRU X 300 C

56 captain crux 500 sandstone

500 Blutspur 501 Gnadenbrot

Structure: 10 S Structure: 10 M X 500 Depth of the bolt hole (mm): 24,27X3,28,29,30,34,35X2 Depth of the bolt hole (mm): 14,18,19X2,20,21,27,28,38

502 Drehstrom 503 Prügelstrafe aptaiin CRU C

Structure: 10 M Structure: 10 L Depth of the bolt hole (mm): 29,44,45,49,50,54,56,57,58X2 Depth of the bolt hole (mm): 56,64X2,69X2,72,73X2,74,77

504 Oktopussy 505 Niemandsland

Structure: 10 M Structure: 5 XL Depth of the bolt hole (mm): 31,32,38X3,39X2,45,48,50 Depth of the bolt hole (mm): 26,38,50,58,65 57 506 Zwischenhoch 507 Paranoia

Structure: 5 L Structure: 5 L Depth of the bolt hole (mm): 33X2,35,47,52 Depth of the bolt hole (mm): 35,36,38,43,45 508 Pestbeule 509 Urknall

X 500 Structure: 5 L Structure: 5 S Depth of the bolt hole (mm): 31,36,38X2,45 Depth of the bolt hole (mm): 19X2,20,23X2

510 Leistenbruch 511 Zwischenfall aptaiin CRU C

Structure: 10 M Structure: 10 M Depth of the bolt hole (mm): 20,21,22,24,26X3,32,38 Depth of the bolt hole (mm): 23,32,33,34,35X2,36X2,40

512 Zwangloser Abgang 513 Schlacke

Structure: 20 Footholds Structure: 10 S Depth of the bolt hole (mm): 7X4 8X12,9X210X2 Depth of the bolt hole (mm): 8X2,11,12,X2,13X3,14,15 58 514 Flugkontrolle 515 Und Tschüss

Structure: 10 S Structure: 10 S X 500 Depth of the bolt hole (mm): 36,48,55,58,60 Depth of the bolt hole (mm): 11X2,13X4,14,1516X2,17 516 Paccard 517 Höllenfahrt aptaiin CRU C

Structure: 1 Structure: 1 Depth of the bolt hole (mm): 72 Depth of the bolt hole (mm): 100

518 Vinatzer

Structure: 1 Depth of the bolt hole (mm): 50 59 cruxies

Freche Gören Klettermaxe

Structure: 5 M Structure: 5 M Depth of the bolt hole (mm): 28,30,32X2,35 Depth of the bolt hole (mm): 25,33,35,36,41

Xies Gipfelstürmer Rotznas aptaiin CRU C

Structure: 5 M Structure: 5 M Depth of the bolt hole (mm): 30X2,33,34,37 Depth of the bolt hole (mm): 27X23536,40 Kleine Racker Störenfried

Structure: 10 s Structure: 10 s Depth of the bolt hole (mm): 30,31,33X2,35,36,38,,40,41,45 Depth of the bolt hole (mm): 28,30X2,33,34,35,36X2,37X2

60 61 mini volume 01 mini volume 02

dimension: 435x295x108 mm dimension: 370x350x197 mm Depth of the bolt hole (mm): 97 Depth of the bolt hole (mm): 178 mini volume 03 mini volume 04

dimension: 485x372x95 mm dimension: 480x255x158 mm Depth of the bolt hole (mm): 83 Depth of the bolt hole (mm): 146

mini volume 05 mini volume 06 23 holds

dimension: 388x270x188 mm dimension: 405x370x88 mm Depth of the bolt hole (mm): 173 Depth of the bolt hole (mm): 71

mini volume 07 mini volume 08

dimension: 510x354x80 mm dimension: 415x320x153 mm Depth of the bolt hole (mm): 65 Depth of the bolt hole (mm): 140 62 mini volume 09 mini volume 10

dimension: 405x300x91 mm dimension: 430x270x128 mm Depth of the bolt hole (mm): 78 Depth of the bolt hole (mm): 113 mini volume 11 mini volume 12 23 holds

dimension: 400x310x170 mm dimension: 430x315x163 mm Depth of the bolt hole (mm): 160 Depth of the bolt hole (mm): 148 mini volume 13 mini volume 14

dimension: 480x295x63 mm dimension: 450x310x161 mm Depth of the bolt hole (mm): 58 Depth of the bolt hole (mm): 148 63 mini volume 15 mini volume 16

dimension: 490x330x140 mm dimension: 500x220x127 mm Depth of the bolt hole (mm): 123 Depth of the bolt hole (mm): 113

mini volume 17 mini volume 18 23 holds

dimension: 533x346x115 mm dimension: 465x313x102 mm Depth of the bolt hole (mm): 63 Depth of the bolt hole (mm): 70

mini volume 19 mini volume 20

dimension: 450x254x178 mm dimension: 415x240x110 mm Depth of the bolt hole (mm): 165 Depth of the bolt hole (mm): 47

64 mini volume 21

dimension: 525x260x120 mm Depth of the bolt hole (mm): 123 mini volume 22 23 holds

dimension: 525x275x161 mm Depth of the bolt hole (mm): 123 mini volume 23

dimension: 423x230x178 mm Depth of the bolt hole (mm): 163

65 66 Mina markovič //RAdovna photo by luka fonda

67 Lapis Holds supports

68 69 LAPIS CRIMPS

CRIMPS 01 CRIMPS 02

Structure: 1S, 3M, 6L Structure: 20S Depth of the bolt hole (mm): 14,16X2,17,20X2,21,25,27,28 Depth of the bolt hole (mm): 13X2, 14X7, 18X11

CRIMPS 03 CRIMPS 04 lapis crimps

Structure: 20S Structure: 15S Depth of the bolt hole (mm): 12, 13X9,14,15,18X4,20X4 Depth of the bolt hole (mm): 13,15,16,17X2,18,20,21X3,23,26,27X3

CRIMPS 05 CRIMPS 06

Structure: 15S/M Structure: 15S/M Depth of the bolt hole (mm): 19,20,21X2,11X21 Depth of the bolt hole (mm): 19X3,20X2,23X7, 25,26,27

70 LAPIS EDGES

EDGES 01 EDGES 02

Structure: 9L, 1XL Structure: 2L, 3XL Depth of the bolt hole (mm): 18X2,19,20,24,27,32X2,33,35 Depth of the bolt hole (mm): 36,40,41,43,53

EDGES 03 EDGES 04 D GES lapis E

Structure: 3L, 2XL Structure: 15M Depth of the bolt hole (mm): 24,31,45X2,80 Depth of the bolt hole (mm): 11,12,16,17X5,18X2,19,21,22,23,25

EDGES 05 EDGES 06

Structure: 2M, 2L, 1XL Structure: 1M, 3L, 1XL Depth of the bolt hole (mm): 22X2, 40,42,45 Depth of the bolt hole (mm): 13,24X2,26,41

71 EDGES 07 EDGES 08

Structure: 2M, 2L, 1XL Structure: 2M, 8L Depth of the bolt hole (mm): 19,25,26X2,41 Depth of the bolt hole (mm): 18X6,19,22X3

EDGES 09 puzzle EDGES 01 d ges

Structure: 5M, 5L Structure: 3L, 2XL

le e le Depth of the bolt hole (mm): 19X3,20,22,24X5 Depth of the bolt hole (mm): 17X2,19,21,25 zz puzzle EDGES 02 puzzle EDGES 03 lapis pu

Structure: 3S, 5M, 2L Structure: 3S, 7M Depth of the bolt hole (mm): 20X10 Depth of the bolt hole (mm): 11,14,15X3,17,19,21,25,26 puzzle EDGES 04 puzzle EDGES 05

Structure: 1L 4XL Structure: 5XL Depth of the bolt hole (mm): 20,24,30X2,37 Depth of the bolt hole (mm): 38,40,41X2, 50 72 LAPIS incut incut EDGES 01 EDGES

Structure: 20S Depth of the bolt hole (mm): 17,18X2,19X2,20X2,21X2,22,23,24X3,25X6

incut EDGES 02 incut EDGES 03 GES

Structure: 20S Structure: 20S Depth of the bolt hole (mm): 8X3,9X2,17,18,19X5,20X2,22,23X5 Depth of the bolt hole (mm): 13,15,16,17,19X3,20X4,22X2,24x7 incut EDGES 04 incut EDGES 05 lapis eD incut

Structure: 20S Structure: 15M Depth of the bolt hole (mm): 16,17X2,18X3,20X4,21X3,22X3,24X4 Depth of the bolt hole (mm): 11,13,20X4, 22X3,25X2, 29X3, 31 incut EDGES 06 incut EDGES 07

Structure: 10M/L Structure: 5L/XL Depth of the bolt hole (mm): 12X2m 13X2,14X2, 16, 17, 18X2 Depth of the bolt hole (mm): 22X2, 23, 24 73 LAPIS mini puzzle mini goody goodys

Structure: 15M Depth of the bolt hole (mm): 16, 20X3, 21, 28X3, 30,35, 38X2,39X3

mini goody 01 mini 02 s dy

Structure: 15M Structure: 15M Depth of the bolt hole (mm): 15,22X2, 24X2, 26,27X2, 28,29X2, 31,40X4 Depth of the bolt hole (mm): 19X3,20X2, 22, 23, 26X2, 28X3, 30X3

mini goody 03 mini goody 04 lapis go mini

Structure: 15M Structure: 15M Depth of the bolt hole (mm): 17,20,21,22,23,25X2,26,27,28,29,30X4 Depth of the bolt hole (mm): 23X4,25,27X5, 28X2,30,32,38

mini goody 05 mini goody 06

Structure: 15M Structure: 15M Depth of the bolt hole (mm): 16,17,18X6,19,20,25,28X4 Depth of the bolt hole (mm): 20,21X2,23X2,24,25X5, 26X4 74 LAPIS goodys goody 01 goody 02

Structure: 10L Structure: 10L Depth of the bolt hole (mm): 28,31,35X2,39,40,43X4 Depth of the bolt hole (mm): 22,30,33,36X2,41X5 s goody goody 03 04 dy lapis goo

Structure: 10L Structure: 10L Depth of the bolt hole (mm): 19,24,29,31X3,42,44X3 Depth of the bolt hole (mm): 31X2,32,34,36,37X5 goody 05 goody 06

Structure: 10L Structure: 10L Depth of the bolt hole (mm): 24,28,32,36,38,4344X4 Depth of the bolt hole (mm): 32X2,37X2,39,42X5

75 LAPIS macro goodys

macro goody 01 macro goody 02

s Structure: 5XL Structure: 1L, 3XL, 1XXL Depth of the bolt hole (mm): 42,44,47,48,50 Depth of the bolt hole (mm): 40X2,43,49,50 dy macro goody 03 macro goody 04 lapis goo macro

Structure: 5XL Structure: 5XL Depth of the bolt hole (mm): 35X2,38,42,55 Depth of the bolt hole (mm): 33,36,37,38X2

macro goody 05 threads

Structure: 1XL, 4XXL Structure: 5XL Depth of the bolt hole (mm): 35,41X2,47,55 Depth of the bolt hole (mm): 35, 36, 39, 40, 44

76 LAPIS open handed goodys open handed mini goody 01 open handed mini goody 02 s dy Structure: 20S Structure: 15M Depth of the bolt hole (mm): 18,23,24,25,26,27,28X14 Depth of the bolt hole (mm): 23X2,24,25,28,29X31x8 d goo

open handed goody 01 open handed macro goody 01 e d lapis han open

Structure: 10L Structure: 5XL Depth of the bolt hole (mm): 27, 32X2, 33, 34, 40X5 Depth of the bolt hole (mm): 24,27,28,31,44 open handed macro goody 02 open handed macro goody 03

Structure: 5XL Structure: 5XL Depth of the bolt hole (mm): 26,32X2,37,46 Depth of the bolt hole (mm): 31,39,40X2,44

77 open handed macro goody 04 open handed macro goody 05

Structure: 5XL Structure:5xl Depth of the bolt hole (mm): 26X2,28,32,38 Depth of the bolt hole (mm): 37,44,47,59,62 s dy macro goo d macro lapis hane open

78 LAPIS screw-ons srew-on 01 srew-on 02

Structure: 5XL Structure:30XS Depth of the bolt hole (mm): 13,14,16,19,25 Depth of the bolt hole (mm): 6,7,910,11,13,14,15 srew-on 03 srew-on 04 lapis screw-ons

Structure: 15S Structure: 40XS Depth of the bolt hole (mm): 4,8,910,11,13,15,20 Depth of the bolt hole (mm): 4,8,914,15 srew-on 05 srew-on 06

Structure: 50XS Structure: 5XL Depth of the bolt hole (mm): 10,13,15,17,18,19

79 LAPIS footholds

footholds 01 footholds 02

Structure: 20 Structure: 20 s Depth of the bolt hole (mm): 22X5,23X6, 24X9 Depth of the bolt hole (mm): 20X4, 21,24X3, 25X5,26X5, 27X2

footholds 03 footholds 04 lapis foothol d

Structure: 20 Structure: 20 Depth of the bolt hole (mm): 19, 20X4, 21X8, 22X4, 23X3 Depth of the bolt hole (mm): 19X2, 20X11, 21X8

80 LAPIS pinches

pinches 04 pinches 05 lapis pinches

Structure: 2M, 2XL, 1XXXL Structure: 1M,1L,1XL,2XXXL Depth of the bolt hole (mm): 45, 52, 59, 63, 85 Depth of the bolt hole (mm): 51,52,55,57,63 pinches 07

Structure: 2L,2XXL,1XXXL Depth of the bolt hole (mm): 39X2,50,65,78

81 puzzle pinches Sneaky Pinches 01

Structure: 2M, 4L, 2XL Structure: 4 XXXL Depth of the bolt hole (mm):27,28,32X2, 35,38, 55,56,69X2 Depth of the bolt hole (mm): 27, 30X3 Sneaky Pinches 02

Structure: 4 XXXL Depth of the bolt hole (mm): 30,, 35 X 3 lapis pinches

82 LAPIS pockets 01 pockets

Structure: 1M, 4L Depth of the bolt hole (mm): 26,29,34,38,40 pockets 02 pockets 03

Structure: 1M, 4L Structure: 4L, 1XL Depth of the bolt hole (mm): 26,29,31,33,43 Depth of the bolt hole (mm): 32,33,35,36,41 pockets 04 pockets 05 lapis pockets

Structure: 5XL Structure: 2M, 2L, 1XXL Depth of the bolt hole (mm): 26,31,32,35,41 Depth of the bolt hole (mm): 21,25,30X2,31 pockets 06 puzzle pockets

Structure: 10M Structure: 4L, 1XXL Depth of the bolt hole (mm): 24,25X232,36 Depth of the bolt hole (mm): 33,35,36,38,62

83 LAPIS slopers

slopers 01 slopers 02

Structure: 5L Structure: 2L, 3XL Depth of the bolt hole (mm): 36,38,40,48X2 Depth of the bolt hole (mm): 63,80,87,91,109

slopers 03 slopers 04 lapis slopers

Structure: 4XL, 1XXL Structure: 3XL, 2XXL Depth of the bolt hole (mm): 53,58,63,65,81 Depth of the bolt hole (mm): 65,76,78,85X2

slopers 05 slopers 06

Structure: 5L Structure: 2l, 3XL Depth of the bolt hole (mm): 52,62,63,70X2 Depth of the bolt hole (mm): 67,69,80,82X3

84 slopers 07 slopers 08

Structure: 3L, 2XL Structure: 5XL Depth of the bolt hole (mm): 51,53,57,70,80 Depth of the bolt hole (mm): 67,74,76,77,78 slopers 09 slopers 10 lapis S lopers

Structure: 1M, 2L, 1XL, 1XXL Structure: 2L, 3XL Depth of the bolt hole (mm): 57,74,77,84,104 Depth of the bolt hole (mm): 36,50,68,69,83 slopers 11 slopers 12

Structure: 5XL Structure: 10S, 5M Depth of the bolt hole (mm): 32,37,40,43,47 Depth of the bolt hole (mm): 22,24,25,26,27X2,32,33,37X7

85 puzzle slopers

Structure: 2L, 3XL Depth of the bolt hole (mm): 38,58,82,85,86 LAPIS balls

ball 01 balls 02 lapis slopers

dimension: 280x220 mm Structure: 2XXL Depth of the bolt hole (mm): 198 Depth of the bolt hole (mm): 132X2

balls 03 balls 04

Structure: 2S, 2M, 2L, 4XL Structure: 5XL Depth of the bolt hole (mm): 29,40,46,54,60 Depth of the bolt hole (mm): 40,52,64,83,95

86 LAPIS training accessories Rollyballs s Rollyballs l

diameter: 8 cm diameter: 10 cm

Rollyballs xl rollybar ering set / alphabet set ering d lapis boul

diameter: 14 cm dimension: 780x70 mm

Training Board product

dimension: 780x330 mm

87 LAPIS bouldering set bouldering set hard bouldering set easy

Structure: 7XS, 2S, 4M, 2L Structure: 6XS, 7S, 1M Depth of the bolt hole (mm): 16X2,17,18,22,26,29,32X7 Depth of the bolt hole (mm): 21,22,26X2, 27X2, 29,31,35X6 ering set ering lapis boul d LAPIS alphabet

alphabet

Structure: 26L Depth of the bolt hole (mm): 24,25,26,27,30X5, 31X3,32X4,33X2,34,35,38,43X5

88 LAPIS volumes volume a volume b

Dimension: 56x56x12 cm (4 holds) Dimension: 78x50x15 cm (4 holds) volume c volume d

Dimension: 54x40x13 cm (20 holds) Dimension: 30x55x23 cm (4 holds) lapis volumes volume e volume f

Dimension: 73x57x20 cm (8 holds) Dimension: 77x26x40 cm (5 holds) volume g Dimension: 69x48x39 cm(9 holds)

89 volume h volume i

Dimension: 94x50x20 cm (10 holds) Dimension: 94x40x15 cm (4 holds)

volume j

Dimension: 110x40x40 cm (7 holds)

volume k lapis volumes

Dimension: 153x106x16 cm (13 holds)

volume l

Dimension: 302x215x85 cm (43 holds)

90 lapis accesories

lapis brush lapis wooden brush

lapis limited edition wooden brush / cherry

lapis limited edition wooden brush / walnut lapis accessories

lapis brush holder

lapis brush holder

91 care & maintenance

FIX

• Always try and fix climbing holds to a perfectly flat surface. • Dual fixing option - you can use both countersunk or cap head M10 bolts. • Wherever possible, use the extra screw hole provided on some holds. • Do not over tighten, see website for ‘Recommended Torque Settings’ e.g. XS=10 Nm, S=20 Nm, M= 25 Nm, L = 30 Nm, X-large= 35 Nm Reduced holds= 20 Nm. • Avoid using impact drivers especially on smaller holds. • Keep fixings clean, this will help avoid cross threading. care

MgCO3

NO!

• Avoid dropping climbing holds. Over time, this can potentially weaken any type of climbing hold. • Fluorescent coloured holds should not be used outdoors. Please ask us for advice when re-ordering. • We recommend that climbers climb on the holds with chalk and clean the holds with a soft-bristled brush. • Climbing shoes should be worn, free from grit and dirt, as this will maintain the hold’s frictional properties for a longer period of time. • Any chips or sharp edges that develop should be removed with an appropriate abrasive e.g. sand paper or a file. • Climbing holds should be stored in a dry environment, as you would with your climbing gear. • Any material present on the steel washer will not affect the holds functionality and will easily break away after the first use.

clean

• We recommend that holds are washed with a high-pressure washer using cold water without detergent. Hot water (above 30ºC ) and detergents can potentially fade certain colours. • Specialty washing solutions e.g. acid-based products can be used. However, using higher concentrations or extended exposure to acid can strip the zinc plating off of the steel washer, and could make certain colours fade. In any case, the strength of a hold will not be affected. • Ask us for advice if you have any queries with regard to a product’s suitability.

92 colours

Our colours will be consistent within each order and from order to order. The UV stability of our standard colours is of the highest possible e.g. Red, Yellow, Orange, Blue, Black, White and are recommended for outdoor use. Fluorescent pigments have a Low UV stability and are therefore NOT recommended for use outdoors.

Traffic Yellow Traffic Orange Traffic Red Traffic Purple Sky Blue May Green Dusty Grey

Signal White Jet Black Fl. Yellow Fl. Orange Fl. Green Fl. Pink

93 jernej kruder photo by luka fonda

94 95 | www.lapisholds.com | www.23holds.com | www.bleaustone.com | www.captain-crux.com | | www.crux-klettergriffe.de | www.climb-holds.com | www.prises-de-escalade.com | | www.klettergriffe.de |

Schlamberger P & J d.o.o. Novo Polje c. X/13, 1260 Ljubljana , Slovenija | T: +386 (0)1 549 11 00 | F: +386 (0)1 549 11 05

Copyright: Bleaustone ®, Bleaustone climber ®, Elephant skin ® and Fontainebleau ®Lapis © Captain Crux© Crux© are registered trademarks of the company Schlamberger P & J d.o.o.